PowerCube 1000 Hybrid Power
Solution
Outdoor Photovoltaic Controller PVPU-72N1
Introduction
The outdoor photovoltaic controller is an innovative solar power
control unit which designed for telecommunication site with solar.
It is mainly used in third-party power with solar access scenarios
and supports Huawei iSolar and blade power with solar scenarios.
The product integrates the solar MPPT module and PLC
communication conversion module. The maximum capacity of the
system is 3600 W. Pole-mounted or wall-mounted installation
with “zero” footprint
Features
Simple Deployment
•
Support pole-mounted, wall-mounted installation with
“0” footprint
•
Flexible
design:
modular
capacity
expansion
Outdoor photovoltaic controller
PVPU-72N1
is
supported
High Efficiency
•
Natural heat dissipation design
•
High efficiency with Max. 97%
•
Voltage adaptation, preferential use of solar, prolonging
the lifespan of energy storage
Management
•
iPV/PV modular management
•
CloudLi battery management
•
Remote energy management by NetEco
(1) Input port (2) Load output port(reserved) (3)
Output port/Battery port 2(reserved) (4) Output
port/Battery port 1 (5) COM_DIN port (6) COM_ALM
port (7) Ground screw (8) Space for the backhaul
module
Port Description
Scenarios
 Outdoor blade/Huawei cabinet power scenario
 Solar access scenario with the third-party power
Note: Any datasheet issued previously is invalid when new version
Issue date of this version: 2021-12-
Specifications
Product Type
System
Environment
Input
Output
Communicatio
n Interface
Outdoor Photovoltaic Controller PVPU-72N1
Dimension
(W×D×H)
300 mm ×60 mm ×400 mm
Weight
8 kg
Installation
Mode
Wall-mounted, pole-mounted
Cabling Mode
Bottom inlet and outlet
Protection Level
IP65
Temperature
Control Mode
Natural heat dissipation
Standby Power
≤ 5W
Operating
Environment
Class C*
Operating
Humidity
5% to 95% (non-condensing)
Working
Temperature
−40℃ to +45℃ (without solar radiation)
Altitude
0 to 2000 m (From 2000~5000m, each 200m increases in
altitude will decrease the working temperature by 1℃)
Input Voltage
80 ~ 435 V DC
Input Capacity
Max. 3600W, 1×20 A
SPD
10 kA, 8/20 µs
Output Voltage
-42V DC to -58V DC
DC Output
1 ×80 A quick plug terminals
Efficiency
Maximum efficiency 97%
Interface
Definition
Southbound (DB9+DB15): 2 ×CAN;
Northbound (DB15): 2 ×RS485 * (4 lines);
Southbound supports MBUS protocol;
Wireless backhaul (Optional 4G Module required)
Communication
Module Standby
Power
The typical working power consumption of the 4G Dongle is ≤ 2
W, and the dial-up power consumption is ≤12 W
Copyright © Huawei Technologies Co., Ltd. 2022. All rights reserved.
HUAWEI TECHNOLOGIES CO., LTD.
No part of this document may be reproduced or transmitted in any form or by any means without
prior written consent of Huawei Technologies Co., Ltd.
General Disclaimer
The information in this document may contain predictive statements including, without limitation,
statements regarding the future financial and operating results, future product portfolio, new
technology, etc. There are a number of factors that could cause actual results and developments to
differ materially from those expressed or implied in the predictive statements. Therefore, such
information is provided for reference purpose only and constitutes neither an offer nor an
acceptance. Huawei may change the information at any time without notice.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
www.huawei.com