MANIPAL UNIVERSITY JAIPUR Department of civil engineering B tech 1st yr MOS 20/02/18 Q.1 Locate the centroid of the T-section shown in the Fig. Q4 Determine the centroid of the section of the concrete dam shown in Fig Ans: yc=40 from top Q.2 Locate the centroid of the section shown in the Fig Ans. (3.523, 2.777) Q5. Determine the centroid of the area shown in Fig Ans. (2.995, 1.890) Ans. (36.62, 61.62) Q.3 Locate the centroid of the I-section shown in Fig. Q.6 In a gusset plate, there are six rivet holes of 21.5 mm diameter as shown in Fig. 4.34. Find the position of the centroid of the gusset plate. Ans. (90.39, 145.42) (0,59.71) Mr. Alok Damare MANIPAL UNIVERSITY JAIPUR Department of civil engineering B tech 1st yr Q.7 Determine the coordinates xc and yc of the centre of a 100 mm diameter circular hole cut in a thin plate so that this point will be the centroid of the remaining shaded area shown in Fig. (All dimensions are in mm). MOS 20/02/18 Q10. Find the coordinates of the centroid of the shaded area with respect to the axes shown in Fig. Ans (90.48, 67.86) Q.8 Determine the coordinates of the centroid of the plane area shown in Fig. 4.36 with reference to the axis shown. Take x = 40 mm. [Ans. x = 43.98 mm; y = 70.15 mm] Q.11 Determine the coordinates of the centroid of shaded as shown in Fig. 4.80 with respect to the corner point O. Take x = 40 mm. Ans (326.40, 219.12) Q9. [Ans. x = 260.07 mm; y = 113.95 mm] Yc= 59.26 Mr. Alok Damare