SO NS CS Fiange
s0 NS CS Pive
Support End Plate
WELDING
S200
40 NB CS
Pipe
NOT TO SCALE, ALL Dimensions are in mm
NOTE:
2000
Dasooeocooseoocooonsoooeosesoeoos
Pipe one End Blind by Plate(10 mm thk)/End cap
Part-3:1.5 inch(40 NB) CS pipe 1.5-2 mm hole in 20 mm space in 180 deg across
eeeeseees
$200
1000
Part-2: 1.5 inch(40 N8) CS pipe 1.5-2 mm hole in 20 mm space in 180 deg a cross. Pipe one End Blind
by Plate(10 mm thk)/End cap
MM thk) welded.
Material
1.5 (40)x1000
2 (50)X8200
Size
2
Qty
MS Plate 10 mm thk
MS Plate 10 mm thk
50 NB ANSi B 16.5 #150
A105 CS Sch-40 (WThk-3.68)
A105 CS Sch-40 (WThk-3.68)
A105 CS Sch-40 (WThk-3.91)
Spec
LO02 2028B
/a-02-23
Remarks
Part-1: 2 inch (50 N8 CS pipe, one end (2 # 150CS) flange connection Other End support Plate (100X100X 10
Pipe
1.5 (40)X2000
pe
Flange
Pipe
Plate
RRARS
BMotN:
DRG. No.: CGP/OSBL/BI0-ETP/001/2023-24
METAL DIFFUSER ASSEMBLY
2 (50)
100x100x10
60X60X10
Plate
2. The complete Assembly should be HOT DEEP GALVANIZED as per standard IS 2629.
1. All pipe joint should be pre-welded with proper welding electrode with Proper stress relieving procedure.
3. The complete assembly to be supplied as ready to install at site.
DRNB
Mech CKD by
Opr CKD By
Opr Approved by
Mech Approved by