Safe Work Method Statement Compiled by : V.Ezzi Approved by : P.Dawson Project Number : This is a generic SWMS to cover all measuring-up activities Location : Various undertaken by Soliflo (Pty) Ltd staff. Description of Work : Measuring up defined areas of the customer's workplace to determine the availability of space and operating envelope of loading arms. Measuring-up to determine the dimensions required on folding stairs and fall prevention equipment to meet the customers requirements. Work Procedure Include step by step detail Arrive at customer site. Possible Hazards Include all possible hazards All site-specific hazards. Travel inside site to worksite. Measuring-up. (Assessment of work area.) All site-specific hazards. Trip hazards Working at height. Working on platform. People working below. People working above. Vehicles passing through area. People passing through area. Cuts / lacerations from measuring tape. Sprains and strains. Performing measuring-up. Travel inside site to exit. Depart customer site. All sit-specific hazards. All site specific hazards. Health and Safety Controls List all safety controls Any necessary induction training. Any necessary medical examinations Sign-in procedure. Customer-appointed representative/ guide. Customer-appointed representative/ guide. See Solifo generic risk assessment " Measuring-up On Customer-Site" for risk control measures. Care to be taken when using a steel tape. Care to be taken not to twist or bend or overstretch excessively. Customer-appointed representative / guide. Adhere to all customer rules / sign-out procedure prior to departure. Report any injuries / incidents which took place during the visit. Report any hazards observed during the visit. Rev 0 Page 1 of 2