4 Complete System Setup 1 2 1 3 4 5 Installation and Setup Instructions Complete configuration worksheet FAS2520 Systems Available in the box or at http://support.netapp.com/NOW/public/system_setup/ 2 Cable Windows client to the same network as your controllers WINDOWS CLIENT 3 Power on all external storage ONLY FAS2520 SYSTEM Subnet 0b 0a AC AC 1 2 4 Install System Setup* software on the Windows client 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 1000/100/10M LNK / 1000/100/10M LNK / MANAGEMENT SUBNET A 5 Start System Setup software B 1 • the system. • When directed, power on your system (or repower). • Wait for discover to complete. Up to 8 minutes. • Enter the values from the configuration worksheet into System Setup.* 0b 0a 0b 2 0a 1 2 Both power supplies MUST be powered on. *If you cannot use System Setup, see the Data ONTAP Software Setup Guide 5 Complete configuration 1 1 3 4 5 1 Prepare for installation 1 2 3 Register at support.netapp.com • Create an account. • Register your system. • Get your license keys. 2 2 In the box: Configuration worksheet Download and run Config Advisor Starter network and storage cables Power cables Serial cable not needed for this configuration From http://support.netapp.com/NOW/download/tools/config_advisor/ 3 Download OnCommand System Manager You provide: From http://support.netapp.com/NOW/cgi-bin/software/ • Provision more storage. • Configure other protocols, data protection, and AutoSupport. • Set up Service Processor and Remote Support Agent. HELPFUL LINKS Visit the NetApp web site for more information. NetApp support site • System Setup information: http://support.netapp.com/NOW/public/system_setup/ • Controller and configuration examples; Universal SAS and ACP Cabling Guide: https://library.netapp.com/ecm/ecm_download_file/ECMM1280392 • OnCommand System Manager documentation set: http://support.netapp.com/documentation/productlibrary/index.html?productID=61372 • Data ONTAP 8 library: http://support.netapp.com/documentation/productlibrary/index.html?productID=30092 • Licenses: http://support.netapp.com/eservice/agree.do?moduleName=PROTOCOL Additional network cables Screwdriver Rack space - 2U Download: For connecting your storage to your network switch and Microsoft® Windows® client Microsoft Windows client Runs the software to configure your storage system • System Setup Software: http://support.netapp.com/NOW/public/system_setup/ • OnCommand System Manager: http://support.netapp.com/NOW/cgi-bin/software/ 4 5 2 1 4 3 5 FRONT VIEW OF SYSTEM 3 Cable storage A Cabling FAS2520 systems with NO external storage 2 1 (Choose option A, B, or C below) 3 4 5 FAS2520 No additional cabling required for a single controller. Power LED Attention LED A Shelf ID display A B B AC Remote/Node Management port (wrench icon) Bezel Console port (Setting: 9600 N-8-1) AC A AC 2 2 Single controller model e0c - e0f 10 GbE Ethernet ports Connect SAS ports B 1 2 BACK VIEW OF SYSTEM PCM Attention LED AC 1 Storage cables A Double controller model Network cables Connect ACP ports One or two controller modules SAS ports (2) A STOP HERE. If you have NO external storage, skip to A NVMEM LED . BB Gigabit Ethernet ports (2) 1 B ACP port (locked wrench icon) 12 2 Cabling FAS2520 systems WITH external storage DS4246 disk shelves Power supply LEDs A A B AC AC 1 AC N N IOM6 2 3 4 IOM6 IOM6 Disconnect all supply power for complete isolation. Disconnect all supply power for complete isolation. 4 3 2 1 N 2 3 4 IOM6 IOM6 Disconnect all supply power for complete isolation. 4 3 2 1 N IOM6 IOM6 Disconnect all supply power for complete isolation. 4 2 Disconnect all supply power for complete isolation. 4 3 2 1 N N 2 3 4 IOM6 IOM6 Disconnect all supply power for complete isolation. 4 3 2 1 Disconnect all supply power for complete isolation. N 4 3 2 1 N 2 Single controller model 3 TO DATA NETWORK SWITCH Double controller model TO MANAGEMENT SUBNET to the management 4 B 10GbE and e0f to e0f 1 Connect port e0d to port e0d 3 N 1 AC 1 2 Network cables B4 For option B only 5 IOM6 IOM6 A 5 Network cables Connect ACP ports on controllers to the disk shelves N to the data switch. Connect the wrench port or subnet switch. 2 4 1 switchless cluster Strap the cables to the cable management arms. A A B AC 5 B 1 AC 2 2 TO DATA NETWORK SWITCH C Cabling FAS2520 systems WITH external storage DS2246 disk shelves 3 TO MANAGEMENT NETWORK SWITCH A If you are converting from a switchless to a switched configuration, see the appropriate migration manual in the Cluster Management and Interconnect Switches library on the NetApp Support Site. A B AC A B AC 1 AC Storage cables AC 2 See your network administrator for help connecting to your switch. IOM6 1 IOM6 IOM6 IOM6 IOM6 IOM6 IOM6 DO NOT power on system at this point. 2 Use retaining clips 2 IOM6 AC 1 Single controller model 1 Daisy chain SAS ports 2 Connect first SAS ports 3 Connect last SAS ports 4 Network cables Connect ACP ports on controllers to the disk shelves AC 2 0a 1 Power cords AC LINK 0b IOM6 LINK 0a LINK 0b IOM6 LINK Both power cords MUST be used for all units. LINK IOM6 1 AC 2 LINK LINK LINK AC IOM6 IOM6 AC 2 Connect both power cords LINK AC 1 IOM6 LINK AC LINK IOM6 LINK LINK LINK LINK LINK IOM6 1 2 3 B 1 2 3 Network cables Disconnect all supply power for complete isolation. B AC NOTE: Port e0c is required; other ports are available if needed. 3 4 A Network cables Connect port e0c Connect last SAS ports 1 B 2 1 A 7-Mode 3 Attach cable management arms. 3 Disconnect all supply power for complete isolation. 2 3 IOM6 Disconnect all supply power for complete isolation. 1 Connect first SAS ports 4 LINK 1 LINK LINK 4 LINK 2 3 2 Disconnect all supply power for complete isolation. N 1 Daisy chain SAS ports IOM6 LINK N IOM6 Disconnect all supply power for complete isolation. LINK LINK Cable controller for 7-Mode Data ONTAP or for switchless clustered Data ONTAP 4 LINK 2 2 3 1 N 1 Disconnect all supply power for complete isolation. N 1 2 N IOM6 LINK 4 Disconnect all supply power for complete isolation. LINK 2 3 LINK N 1 LINK 25 kg (55 lbs.) • Place the bezel over the front of the system. 4 Rail kit: follow instructions in rail kit. OR System cabinet: install in system cabinet. 1 • Rack the system. 1 Disconnect all supply power for complete isolation. 3 4 LINK 2 3 Disconnect all supply power for complete isolation. LINK 1 LINK Install system Storage cables AC 1 2 LINK 1 LIFTING HAZARD 1 2 3 B 2 CAUTION A B IOM6 2 Install hardware Double controller model Use retaining clips For additional configurations, see HELPFUL LINKS. 2 1 4 3 5 FRONT VIEW OF SYSTEM 3 Cable storage A Cabling FAS2520 systems with NO external storage 2 1 (Choose option A, B, or C below) 3 4 5 FAS2520 No additional cabling required for a single controller. Power LED Attention LED A Shelf ID display A B B AC Remote/Node Management port (wrench icon) Bezel Console port (Setting: 9600 N-8-1) AC A AC 2 2 Single controller model e0c - e0f 10 GbE Ethernet ports Connect SAS ports B 1 2 BACK VIEW OF SYSTEM PCM Attention LED AC 1 Storage cables A Double controller model Network cables Connect ACP ports One or two controller modules SAS ports (2) A STOP HERE. If you have NO external storage, skip to A NVMEM LED . BB Gigabit Ethernet ports (2) 1 B ACP port (locked wrench icon) 12 2 Cabling FAS2520 systems WITH external storage DS4246 disk shelves Power supply LEDs A A B AC AC 1 AC N N IOM6 2 3 4 IOM6 IOM6 Disconnect all supply power for complete isolation. Disconnect all supply power for complete isolation. 4 3 2 1 N 2 3 4 IOM6 IOM6 Disconnect all supply power for complete isolation. 4 3 2 1 N IOM6 IOM6 Disconnect all supply power for complete isolation. 4 2 Disconnect all supply power for complete isolation. 4 3 2 1 N N 2 3 4 IOM6 IOM6 Disconnect all supply power for complete isolation. 4 3 2 1 Disconnect all supply power for complete isolation. N 4 3 2 1 N 2 Single controller model 3 TO DATA NETWORK SWITCH Double controller model TO MANAGEMENT SUBNET to the management 4 B 10GbE and e0f to e0f 1 Connect port e0d to port e0d 3 N 1 AC 1 2 Network cables B4 For option B only 5 IOM6 IOM6 A 5 Network cables Connect ACP ports on controllers to the disk shelves N to the data switch. Connect the wrench port or subnet switch. 2 4 1 switchless cluster Strap the cables to the cable management arms. A A B AC 5 B 1 AC 2 2 TO DATA NETWORK SWITCH C Cabling FAS2520 systems WITH external storage DS2246 disk shelves 3 TO MANAGEMENT NETWORK SWITCH A If you are converting from a switchless to a switched configuration, see the appropriate migration manual in the Cluster Management and Interconnect Switches library on the NetApp Support Site. A B AC A B AC 1 AC Storage cables AC 2 See your network administrator for help connecting to your switch. IOM6 1 IOM6 IOM6 IOM6 IOM6 IOM6 IOM6 DO NOT power on system at this point. 2 Use retaining clips 2 IOM6 AC 1 Single controller model 1 Daisy chain SAS ports 2 Connect first SAS ports 3 Connect last SAS ports 4 Network cables Connect ACP ports on controllers to the disk shelves AC 2 0a 1 Power cords AC LINK 0b IOM6 LINK 0a LINK 0b IOM6 LINK Both power cords MUST be used for all units. LINK IOM6 1 AC 2 LINK LINK LINK AC IOM6 IOM6 AC 2 Connect both power cords LINK AC 1 IOM6 LINK AC LINK IOM6 LINK LINK LINK LINK LINK IOM6 1 2 3 B 1 2 3 Network cables Disconnect all supply power for complete isolation. B AC NOTE: Port e0c is required; other ports are available if needed. 3 4 A Network cables Connect port e0c Connect last SAS ports 1 B 2 1 A 7-Mode 3 Attach cable management arms. 3 Disconnect all supply power for complete isolation. 2 3 IOM6 Disconnect all supply power for complete isolation. 1 Connect first SAS ports 4 LINK 1 LINK LINK 4 LINK 2 3 2 Disconnect all supply power for complete isolation. N 1 Daisy chain SAS ports IOM6 LINK N IOM6 Disconnect all supply power for complete isolation. LINK LINK Cable controller for 7-Mode Data ONTAP or for switchless clustered Data ONTAP 4 LINK 2 2 3 1 N 1 Disconnect all supply power for complete isolation. N 1 2 N IOM6 LINK 4 Disconnect all supply power for complete isolation. LINK 2 3 LINK N 1 LINK 25 kg (55 lbs.) • Place the bezel over the front of the system. 4 Rail kit: follow instructions in rail kit. OR System cabinet: install in system cabinet. 1 • Rack the system. 1 Disconnect all supply power for complete isolation. 3 4 LINK 2 3 Disconnect all supply power for complete isolation. LINK 1 LINK Install system Storage cables AC 1 2 LINK 1 LIFTING HAZARD 1 2 3 B 2 CAUTION A B IOM6 2 Install hardware Double controller model Use retaining clips For additional configurations, see HELPFUL LINKS. 4 Complete System Setup 1 2 1 3 4 5 Installation and Setup Instructions Complete configuration worksheet FAS2520 Systems Available in the box or at http://support.netapp.com/NOW/public/system_setup/ 2 Cable Windows client to the same network as your controllers WINDOWS CLIENT 3 Power on all external storage ONLY FAS2520 SYSTEM Subnet 0b 0a AC AC 1 2 4 Install System Setup* software on the Windows client 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 1000/100/10M LNK / 1000/100/10M LNK / MANAGEMENT SUBNET A 5 Start System Setup software B 1 • the system. • When directed, power on your system (or repower). • Wait for discover to complete. Up to 8 minutes. • Enter the values from the configuration worksheet into System Setup.* 0b 0a 0b 2 0a 1 2 Both power supplies MUST be powered on. *If you cannot use System Setup, see the Data ONTAP Software Setup Guide 5 Complete configuration 1 1 3 4 5 1 Prepare for installation 1 2 3 Register at support.netapp.com • Create an account. • Register your system. • Get your license keys. 2 2 In the box: Configuration worksheet Download and run Config Advisor Starter network and storage cables Power cables Serial cable not needed for this configuration From http://support.netapp.com/NOW/download/tools/config_advisor/ 3 Download OnCommand System Manager You provide: From http://support.netapp.com/NOW/cgi-bin/software/ • Provision more storage. • Configure other protocols, data protection, and AutoSupport. • Set up Service Processor and Remote Support Agent. HELPFUL LINKS Visit the NetApp web site for more information. NetApp support site • System Setup information: http://support.netapp.com/NOW/public/system_setup/ • Controller and configuration examples; Universal SAS and ACP Cabling Guide: https://library.netapp.com/ecm/ecm_download_file/ECMM1280392 • OnCommand System Manager documentation set: http://support.netapp.com/documentation/productlibrary/index.html?productID=61372 • Data ONTAP 8 library: http://support.netapp.com/documentation/productlibrary/index.html?productID=30092 • Licenses: http://support.netapp.com/eservice/agree.do?moduleName=PROTOCOL Additional network cables Screwdriver Rack space - 2U Download: For connecting your storage to your network switch and Microsoft® Windows® client Microsoft Windows client Runs the software to configure your storage system • System Setup Software: http://support.netapp.com/NOW/public/system_setup/ • OnCommand System Manager: http://support.netapp.com/NOW/cgi-bin/software/ 4 5