SCALE™ IGBT and SiC MOSFET Gate Driver Product Overview 2020 www.power.com Power Everywhere As the leading gate driver experts for medium- and high-power inverter systems, Power Integrations continuously invests in technology development, IC packaging, applications expertise and manufacturing excellence. This enables us to deliver high-performance gate driver solutions from 5 kW up to MW for blocking voltages up to 6.5 kV. As well as addressing our traditional markets—industrial, railway, HVDC, PV—we now have AEC-Q100 qualification for some members of our SCALE-iDriver™ gate driver IC family. This development enables automotive designers to use our leading products in Battery Electric Vehicle (BEV) and Plug-in Hybrid Electric Vehicle (PHEV) applications such as vehicle drivetrain, power conversion, on-board chargers and charging stations. We also offer optimized products for emerging SiC MOSFET applications, addressing that burgeoning market, and we have added new SCALE™-2 solutions for PrimePack3+™ and HVDC designs. These are just a few highlights in this new catalog. By expanding our portfolio with conformal coating and burn-in services, we have further improved the robustness of our gate drivers—which were already renowned in industry for long life and operational safety—and we are able to respond faster to customer-specific requirements. With the implementation of a new state-of-the-art production board test system, we have further increased product reliability and now provide high-quality PCBA testing at the highest fault coverage rate without sacrificing throughput which is demanded by customers in all our key market segments—automotive, industrial, railway, HVDC, PV, etc. Check out this catalog to see if we have a solution for your application. If you cannot find an exact match for your requirement, we welcome the opportunity to develop a custom or tailored solution. Please contact your local sales office to discuss your specific needs. Power Integrations – Power Everywhere. Best regards, Thomas Simonis VP - Gate Drivers - Power Integrations PI Databook Notes at Your Fingertips All Power Integrations Products • • • • AC-DC converters LED drivers Gate drivers Motor drivers Useful Product Information • Technical documents including data sheets and application notes Convenient and Easy to Use • • • Intuitive interface Available in five languages Download, print, email, and share product documents Free download on iOS or Android Scan the QR Code to Begin 4 / 74 © 2020 | power.com Plug-and-Play Gate Drivers Gate Driver Isolation 1 2SP0115T Reinforced 2SP0320 Reinforced 2SP0430T Reinforced 1SP0635 Reinforced 1SP0335 + ISO5125I Functional 1SP0340 + ISO5125I Functional 1SP0351V Functional 2SC0106T Reinforced 2SC0108T Reinforced 2SC0115T Gate Driver Cores Functional Reinforced 2SD300C17 Reinforced 2SC0435T Reinforced 2SC0650P Reinforced 1SC2060P Reinforced 2SC0535T Reinforced 2SC0635T Functional 1SC0450V / 1SC0450E Functional SID1151K Reinforced Basic SID1181K Reinforced Basic Gate Driver ICs SID1181KQ Reinforced Basic SID1112K Reinforced SID1132K Reinforced SID1132KQ Reinforced SID1152K Reinforced SID1182K Reinforced SID1182KQ Reinforced SIC1182K Reinforced SIC118xKQ Reinforced SID1183K Reinforced 600 650 750 Basic 1200 1700 3300 4500 6500 Semiconductor Blocking Voltage (V) 1 Gate Driver Isolation Coordination by IEC 60664-1, IEC 61800-5-1, IEC 60077-1 © 2020 | power.com 5 / 74 Contents SCALE-iDriver™ Gate Driver ICs 8 1200 V SCALE-iDriver™ Gate Driver SID1112K, SID1132K, SID1152K, SID1182K ��������������������������������������������������������10 600 / 650 V SCALE-iDriver™ Gate Driver SID1151K, SID1181K���������������������������������������������������������������������������������������������������12 1700 V SCALE-iDriver™ Gate Driver SID1183K�����������������������������������������������������������������������������������������������������������������������14 SCALE-iDriver™ Gate Driver SID1102K�����������������������������������������������������������������������������������������������������������������������16 Automotive Application Gate Drivers SID1132KQ, SID1181KQ, SID1182KQ, SIC118xKQ ��������������������������������������������18 SCALE-iDriver™ (SiC MOSFET) SIC1182K �����������������������������������������������������������������������������������������������������������������������20 SIT12xxI DC-DC Converter Family SIT1217I, SIT1253I������������������������������������������������������������������������������������������������������22 Gate Driver Cores 24 SCALE™-2+ Gate Driver Core 2SC0106T ����������������������������������������������������������������������������������������������������������������������26 SCALE™-2+ Gate Driver Core 2SC0115T ����������������������������������������������������������������������������������������������������������������������28 SCALE™-2+ Gate Driver Core 2SC0108T ����������������������������������������������������������������������������������������������������������������������30 SCALE™-2+ Gate Driver Core 2SC0435T ����������������������������������������������������������������������������������������������������������������������32 SCALE™-2 IGBT Gate Driver Core 2SD300C17��������������������������������������������������������������������������������������������������������������������34 SCALE™-2 Planar Driver Core 2SC0650P����������������������������������������������������������������������������������������������������������������������36 SCALE™-2 Single-Channel Driver Core 1SC2060P����������������������������������������������������������������������������������������������������������������������38 SCALE™-2 Gate Driver Core 2SC0535T ����������������������������������������������������������������������������������������������������������������������40 SCALE™-2 Gate Driver Core 2SC0635T ����������������������������������������������������������������������������������������������������������������������42 SCALE™-2 Gate Driver Core 1SC0450V2, 1SC0450E2 ��������������������������������������������������������������������������������������������44 6 / 74 © 2020 | power.com Plug-and-Play Gate Drivers 46 SCALE™-2 Plug-and-Play Gate Driver 2SP0115T ����������������������������������������������������������������������������������������������������������������������48 SCALE™-2 Plug-and-Play IGBT Gate Driver 2SP0320T2, 2SP0320V2 ��������������������������������������������������������������������������������������������50 SCALE™-2 Plug-and-Play IGBT Gate Driver 2SP0430T2��������������������������������������������������������������������������������������������������������������������52 SCALE™-2 Plug-and-Play IGBT Gate Driver 1SP0635V2��������������������������������������������������������������������������������������������������������������������54 SCALE™-2 Plug-and-Play IGBT Gate Driver 1SP0340V2 and DC-DC Converter ISO5125I �������������������������������������������������������56 SCALE™-2 Plug-and-Play IGBT Gate Driver 1SP0335 and DC-DC Converter ISO5125I������������������������������������������������������������58 SCALE™-2 Plug-and-Play 1SP0351V2��������������������������������������������������������������������������������������������������������������������60 DC-DC Converter ISO5125I for SCALE™-2 Plug-and-Play Gate Drivers�����������������������������������������������������������62 Conformal Coating for Gate Drivers ���������������������������������������������������������������������64 Burn-In for Gate Drivers��������������������������������������������������������������������������������������������66 SiC MOSFET Gate Driver Cores 600 V – 4500 V���������������������������������������������������68 SCALE-iFlex™ Isolated Master Control (IMC), Module Adapted Gate Driver (MAG)����������������������������������������������������������������������70 © 2020 | power.com 7 / 74 SCALE-iDriver™ Gate Driver ICs Power Integrations is a technology and market leader in mid- and high-power gate drivers. Using highly integrated technology, the company’s gate drivers employ up to 85% fewer components than other commonly-available solutions. Power Integrations has 30 years’ history of supporting demanding industries such as railway, power generation, power transmission and industrial automation with products that combine outstanding reliability, best-in-class performance and competitive pricing. Innovative Technology Automotive Applications The SCALE-iDriver family of gate driver ICs, optimized for driving both IGBTs and SiC MOSFETs, are the first products to bring Power Integrations’ pioneering FluxLink™ magnetoinductive bi-directional communications technology for driver applications ranging from 650 V up to 1700 V. Power Integrations SCALE-iDriver ICs for automotive applications (SID11xxKQ / SIC118xKQ) are AEC-Q100 qualified, can drive up to 8 A and support 600 V, 650 V, 750 V and 1200 V IGBT and SiC MOSFET inverter designs up to several hundred kW. • • • FluxLink technology eliminates the need for short- lived optoelectronics and associated compensation circuitry, thereby enhancing operational stability while reducing system complexity. Advanced system safety and protection features, commonly found in medium- and high-voltage applications, enhance product reliability. Innovative eSOP™ package features 9.5 mm of creepage and a Comparative Tracking Index (CTI) = 600, ensuring substantial operating voltage margin and high system reliability. 8 / 74 SCALE-iDriver Gate Driver ICs The SCALE-iDriver family of galvanic isolated singlechannel gate driver ICs ranges in output current from 1 A up to 8 A. SCALE-iDriver devices are optimized for driving IGBT and SiC MOSFETs from 600 V to 1700 V, and enable inverters to be built up to 110 kW using only a few external components. © 2020 | power.com Gate Driver Isolation 1 SID1151K Reinforced Basic SID1181K Reinforced Basic Gate Driver ICs SID1181KQ Reinforced Basic SID1112K Reinforced SID1132K Reinforced SID1132KQ Reinforced SID1152K Reinforced SID1182K Reinforced SID1182KQ Reinforced SIC1182K Reinforced SIC118xKQ Reinforced SID1183K Reinforced 600 650 750 Basic 1200 1700 3300 4500 6500 Semiconductor Blocking Voltage (V) 1 Gate Driver Isolation Coordination according to IEC 60664-1 and VDE 0884-10 © 2020 | power.com 9 / 74 1200 V SCALE-iDriver™ Gate Driver Product Title SID1112K, SID1132K, SID1152K, SID1182K Galvanically-Reinforced Isolated Single-Channel Gate Driver IC; Output Currents from 1 A to 8 A; Drives Inverters Up to 110 kW Using Only a Few External Components Applications Key Features • • • • • • • • Industrial motor drives (GPD, VFD, AC drives and servo drives) Uninterruptible power supplies (UPS) Photovoltaic inverters Industrial (welding, health care, plasma, inductive heating) EV charger (supply and station) Certification • • • • • eSOP™ package: CTI 600, 9.5 mm creepage and clearance Increased reliability, smaller size, lower system cost SCALE technology reduces component count and system cost; smaller and simpler PCB ASSD function controls di / dt in desaturation without adjustment or development work VEE regulator avoids parasitic turn on Splitted outputs only require a unipolar power supply for secondary side Reinforced isolation according to VDE 0884-10 and IEC 60747-10 UL 1577 certified: E358471 complies with IEC 61000-4-8 and IEC 61000-4-9 standards 10 / 74 © 2020 | power.com Key Data Overview Parameter Min Typical Max Unit Primary-side supply voltage (VVCC) 4.75 5 5.25 V 22 25 28 0 7.3 8 20 Secondary-side total supply voltage (VTOT) Maximum gate sourcing peak current (IGH) Maximum gate sinking peak current (IGL) Operating switching frequency (fS) Propagation delay jitter Turn-on propagation delay time (tP(LH)) Turn-off propagation delay time (tP(HL)) Minimum turn-on and -off PWM pulses extension (tGE(MIN)) Creepage distance primary-secondary (L2) Clearance distance primary-secondary (L1) Tracking resistance (Comparative Tracking Index - CTI) Maximum package dissipated power (PS) 100% production withstanding isolation voltage test (VTEST) 100% production partial discharge test (VPD(m)) V A A kHz ns ns ns ns mm mm 75 ±5 253 262 650 9.5 9.5 600 1.79 W kVRMS VPEAK 6 2652 Application Circuit (SID11x2K) SCALE-iDriver Primary-Side Logic Secondary-Side Logic RVCE VCE VGXX IN DCL CGXX VISO Fault Output VIN CRES RVCEX SO GH RSO VCC VVCC + - DSTO CS1 VTOT + - Collector Gate FluxLink C1 RG(ON) GL RG(OFF) GND Emitter VEE CS2 COM PI-7949b-041218 Reference Designs gate-driver.power.com/design-support/reference-designs RDHP Product Technology Channels Voltage Class Power Module Package Related Power Module RDHP-1526 SID1182K SCALE-iDriver 2 1200 V Any Up to 3600 A RDHP-1608 SID1182K SCALE-iDriver 2 1200 V Any Up to 600 A Interface Electrical (5 V logic) Electrical (5 V logic) Ordering Information Part Number Rated Current IGBT Collector Current Ratings Ordering Code Tubes – 48 pcs Ordering Code Tape & Reel – 1000 pcs SID1112K SID1132K SID1152K SID1182K 1A 2.5 A 5A 8A Up to 50 A Up to 100 A Up to 300 A Up to 600 A SID1112K SID1132K SID1152K SID1182K SID1112K-TL SID1132K-TL SID1152K-TL SID1182K-TL © 2020 | power.com 11 / 74 600 / 650 V SCALE-iDriver™ Gate Driver Product Title SID1151K, SID1181K Up to 8 A Single-Channel IGBT / SiC MOSFET Gate Driver Providing Reinforced Galvanic Isolation Up to 650 V Blocking Voltage and Basic Isolation Up to 1200 V Applications Key Features • • • • • • • • Delivery vehicles General purpose drives General industrial equipment Certification • • Reinforced isolation according to VDE 0884-10 and IEC 60747-10 UL 1577 certified: E358471 complies with IEC 61000-4-8 and IEC 61000-4-9 standards 12 / 74 • • • • • Split outputs providing up to 8 A peak drive current Integrated FluxLink™ technology Rail-to-rail stabilized output voltage Unipolar supply voltage for secondary-side Suitable for 600 V / 650 V / 1200 V IGBT and SiC MOSFET switches Providing basic isolation up to 1200 V blocking voltage Up to 75 kHz switching frequency -40 °C to 125 °C operating ambient temperature High common-mode transient immunity eSOP™ package with 9.5 mm creepage and clearance © 2020 | power.com Key Data Overview Parameter 1 Min Typical Max Unit Primary-side supply voltage (VVCC) 4.75 5 5.25 V 22 25 28 V Secondary-side total supply voltage (VTOT) Maximum gate sourcing peak current (IGH) Maximum gate sinking peak current (IGL) Operating switching frequency (fS) 0 7.3 A 8 A 20 Propagation delay jitter kHz ±5 ns Turn-on propagation delay time (tP(LH)) 253 ns Turn-off propagation delay time (tP(HL)) 262 ns Minimum turn-on and -off PWM pulses extension (tGE(MIN)) 650 ns Creepage distance primary-secondary (L2) 9.5 mm Clearance distance primary-secondary (L1) 9.5 mm Tracking resistance (Comparative Tracking Index - CTI) 600 Maximum package dissipated power (PS) 1.79 100% production withstanding isolation voltage test (VTEST) 100% production partial discharge test (VPD(m)) 1 75 W 6 kVRMS 1800 VPEAK Parameters apply to SID1181K Application Circuit (SID11x1K) SCALE-iDriver Primary-Side Logic Secondary-Side Logic RVCE VCE VGXX IN DCL CGXX VISO Fault Output VIN CRES RVCEX SO GH RSO VCC VVCC + - C1 FluxLink RG(ON) DSTO CS1 VTOT + - Collector Gate GL RG(OFF) GND Emitter VEE CS2 COM PI-7949b-041218 Ordering Information Part Number Rated Current IGBT Collector Current Ratings Ordering Code Tubes – 48 pcs Ordering Code Tape & Reel – 1000 pcs SID1151K 5A Up to 300 A SID1151K SID1151K-TL SID1181K 8A Up to 600 A SID1181K SID1181K-TL © 2020 | power.com 13 / 74 1700 V SCALE-iDriver™ Gate Driver Product Title SID1183K Single-Channel Gate Driver for Up to 1700 V Application with Basic Isolation Applications Key Features • • • • • • VFD (Variable Frequency Drives), AC drives from 500 V to 690 V Photovoltaic inverters Medium Voltage Drives (MVD) and LV STATCOM Commercial e-mobility (E-bus, E-truck, CAV) Railway auxiliary inverters Certification • • Basic isolation according to VDE 0884-10 and IEC 60747-10 UL 1577 certified: E358471 complies with IEC 61000-4-8 and IEC 61000-4-9 standards 14 / 74 • • • • • • Full platform solution: same device across the whole voltage range from 1200 V to 1700 V FluxLink™ provides basic isolation for applications using 1700 V IGBTs eSOP™ package provides CTI 600 and >9.5 mm creepage and clearance distance SCALE features reduced component count and system cost ASSD function controls di / dt of the semiconductor in desaturation without adjustment or development work VEE regulator avoids parasitic turn on Switching up to 1700 V and 600 A IGBT modules without external boosters (ASSD function still effective) © 2020 | power.com Key Data Overview Parameter Min Typical Max Unit Primary-side supply voltage (VVCC) 4.75 5 5.25 V 22 25 28 0 7.3 8 20 Secondary-side total supply voltage (VTOT) Maximum gate sourcing peak current (IGH) Maximum gate sinking peak current (IGL) Operating switching frequency (fS) Propagation delay jitter Turn-on propagation delay time (tP(LH)) Turn-off propagation delay time (tP(HL)) Minimum turn-on and -off PWM pulses extension (tGE(MIN)) Creepage distance primary-secondary (L2) Clearance distance primary-secondary (L1) Tracking resistance (Comparative Tracking Index - CTI) Maximum package dissipated power (PS) 100% production withstanding isolation voltage test (VTEST) 100% production partial discharge test (VPD(m)) V A A kHz ns ns ns ns mm mm 75 ±5 253 262 650 9.5 9.5 600 1.79 W kVRMS VPEAK 6 2550 Application Circuit (SID1183K) SCALE-iDriver Primary-Side Logic Secondary-Side Logic RVCE VCE VGXX CRES IN DCL CGXX VISO Fault Output VIN RVCEX SO GH RSO VCC VVCC + - RG(ON) CS1 VTOT + - Collector Gate FluxLink C1 DSTO RG(OFF) GL GND Emitter VEE CS2 COM PI-7949b-041218 Reference Design gate-driver.power.com/design-support/reference-designs RDHP Product Technology Channels Voltage Class Power Module Package Related Power Module RDHP-1702 SID1183K SCALE-iDriver 2 1700 V Any N/A Interface Electrical (5 V logic) Ordering Information Part Number Rated Current IGBT Collector Current Ratings Ordering Code Tubes – 48 pcs Ordering Code Tape & Reel – 1000 pcs SID1183K 8A Up to 600 A SID1183K SID1183K-TL © 2020 | power.com 15 / 74 SCALE-iDriver™ Gate Driver Product Title SID1102K Single-Channel IGBT and SiC MOSFET Gate Driver in eSOP™ Package with Reinforced Galvanic Isolation Applications Key Features • • • • • • • Uninterruptible power supplies (UPS) VFD (Variable Frequency Drives), AC drives Photovoltaic inverters Commercial air conditioners EV charger (supply and station) Welding Certification • • Reinforced isolation according to VDE 0884-10 and IEC 60747-10 UL 1577 certified: E358471 complies with IEC 61000-4-8 and IEC 61000-4-9 standards 16 / 74 • • • • • • • Straightforward single channel 5 A IGBT gate driver with optionally scalable external N-channel MOSFET booster for up to 60 A peak gate current (N-channel has lower losses and lowers total system cost), with wide flexible use to drive IGBT modules up to 1200 V and current from 50 A up to 3600 A Undervoltage lockout Integrated FluxLink™ technology provides safe isolation between primary side and secondary side Rail-to-rail stabilized output voltage Suitable for 600 V / 650 V / 1200 V IGBT and SiC MOSFET switches Up to 75 kHz switching frequency -40 °C to 125 °C operating ambient temperature eSOP package with 9.5 mm creepage and clearance © 2020 | power.com Key Data Overview Parameter Min Typical Max Unit Primary-side supply voltage (VVCC) 4.75 5 5.25 V 22 25 28 V Secondary-side total supply voltage (VTOT) Maximum gate sourcing peak current (IGH) Maximum gate sinking peak current (IGL) Operating switching frequency (fS) 3.3 A 5 A 75 kHz Propagation delay jitter ±5 ns Turn-on propagation delay time (tP(LH)) 262 ns Turn-off propagation delay time (tP(HL)) 262 ns Minimum turn-on and -off PWM pulses extension (tGE(MIN)) 650 ns Creepage distance primary-secondary (L2) 9.5 mm Clearance distance primary-secondary (L1) 9.5 mm Tracking resistance (Comparative Tracking Index - CTI) 600 Maximum package dissipated power (PS) 1.79 100% production withstanding isolation voltage test (VTEST) 100% production partial discharge test (VPD(m)) W 6 kVRMS 2652 VPEAK Application Circuit (SID1102K) SCALE-iDriver Primary-Side Logic Secondary-Side Logic VGXX VISO * IN AUXGH G VCC VIN FluxLink VVCC + - AUXGL VTOT + - GND VEE COM *Optional for gate peak current requirements >5 A PI-8527-111317 Ordering Information Part Number Rated Current IGBT Collector Current Ratings without Booster Ordering Code Tubes – 48 pcs Ordering Code Tape & Reel – 1000 pcs SID1102K 5A Up to 300 A SID1102K SID1102K-TL © 2020 | power.com 17 / 74 Automotive Application Gate Drivers Product Title SID1132KQ, SID1181KQ, SID1182KQ, SIC118xKQ 2.5 A and Up to 8 A Single-Channel IGBT / SiC MOSFET Gate Driver for Automotive Applications Providing Reinforced Galvanic Isolation Applications Key Features • • • • • Electric vehicle power train for BEV and BHEV Electric vehicle and charger stations High reliability drivers and inverters Certification • • • • • • AEC-Q100 qualified reaching automotive grade level 1 Full safety and regulatory compliance 100% production partial discharge test 100% production HIPOT compliance testing Reinforced isolation according to VDE 0884-10 and IEC 60747-10 UL 1577 certified: E358471 complies with IEC 61000-4-8 and IEC 61000-4-9 standards 18 / 74 • • • • • • • Split outputs providing up to 8 A peak drive current Integrated FluxLink™ technology providing safe isolation between primary-side and secondary-side Rail-to-rail stabilized output voltage Unipolar supply voltage for secondary side Suitable for 600 V / 650 V / 750 V / 1200 V IGBT and SiC MOSFET switches Up to 75 kHz switching frequency -40 °C to +125 °C operating ambient temperature High common-mode transient immunity eSOP™ package with 9.5 mm creepage and clearance © 2020 | power.com Key Data Overview Parameter Min Typical Max Unit Primary-side supply voltage (VVCC) -0.5 5 6.5 V Secondary-side total supply voltage (VTOT) -0.5 25 30 Maximum gate sourcing peak current (IGH) Maximum gate sinking peak current (IGL) Operating switching frequency (fS) Propagation delay jitter Turn-on propagation delay time (tP(LH)) Turn-off propagation delay time (tP(HL)) Minimum turn-on and -off PWM pulses extension (tGE(MIN)) Creepage distance primary-secondary (L2) Clearance distance primary-secondary (L1) Tracking resistance (Comparative Tracking Index - CTI) Maximum package dissipated power (PS) 100% production withstanding isolation voltage test (VTEST) 100% production partial discharge test (VPD(m)) 1 7.3 8 20 V A A kHz ns ns ns ns mm mm 75 ±5 253 262 650 9.5 9.5 600 1.79 W kVRMS VPEAK 6/51 2652 / 1407 1 For SID1181KQ Application Circuit (SID11xxKQ) SCALE-iDriver Primary-Side Logic Secondary-Side Logic RVCE VCE VGXX CRES IN DCL CGXX VISO Fault Output VIN RVCEX SO GH RSO VCC VVCC + - C1 FluxLink RG(ON) DSTO CS1 VTOT + - Collector Gate GL RG(OFF) GND Emitter VEE CS2 COM PI-7949b-041218 Ordering Information Part Number Rated Current IGBT / SiC MOSFET Collector Current Ratings Ordering Code Tubes – 48 pcs Ordering Code Tape & Reel – 1000 pcs SID1132KQ 2.5 A Up to 100 A SID1132KQ SID1132KQ-TL SID1182KQ 8A Up to 600 A SID1182KQ SID1182KQ-TL SID1181KQ 8A Up to 600 A SID1181KQ SID1181KQ-TL SIC1181KQ 8A Up to 600 A SIC1181KQ SIC1181KQ-TL SIC1182KQ 8A Up to 800 A SIC1182KQ SIC1182KQ-TL © 2020 | power.com 19 / 74 SCALE-iDriver™ (SiC MOSFET) Product Title SIC1182K 8 A Single-Channel SiC MOSFET Gate Driver Providing Reinforced Galvanic Isolation Up to 1200 V Applications Key Features • • • • • • • • • • • Uninterruptible power supplies (UPS) Photovoltaic inverters Welding inverters Servo drives Industrial applications Off-board EV charger (supply and station) Highest efficiency (8 A) driver for Silicon Carbide switches Ultra-fast short-circuit detection (typically <2 μs) Drain-Source overvoltage protection Advanced Active Clamping (SiC-AAC) Externally configurable gate-drive voltages match multiple SiC architectures Certification • • Reinforced isolation according to VDE 0884-10 and IEC 60747-10 UL 1577 certified: E358471 complies with IEC 61000-4-8 and IEC 61000-4-9 standards 20 / 74 © 2020 | power.com Key Data Overview Parameter Min Primary-side supply voltage (VVCC) Secondary-side total supply voltage (VTOT) Typical Max Unit -0.5 6.5 V -0.5 30 V Maximum gate sourcing peak current (IG(H)) 7.8 A Maximum gate sinking peak current (IG(L)) 7.3 A Operating switching frequency (fS) 150 kHz Propagation delay jitter ±5 ns Turn-on propagation delay time (tP(LH)) 265 ns Turn-off propagation delay time (tP(HL)) 270 ns Minimum turn-on and -off PWM pulses extension (tGE(MIN)) 650 ns Creepage distance primary-secondary (L2) 9.5 mm Clearance distance primary-secondary (L1) 9.5 mm Tracking resistance (Comparative Tracking Index - CTI) 600 Maximum package dissipated power (PS) W 1.79 100% production withstanding isolation voltage test (VTEST) 6000 V 100% production partial discharge test (VPD(m)) 2652 VPEAK Application Circuit (SIC1182K / SIC118xKQ) SCALE-iDriver Primary-Side Logic Secondary-Side Logic SNS VISO RCETH IN CCOMPS GH SO VGXX VIN VCC VCC + - FluxLink + VTOT - GL GND VEE COM PI-8897-011119 Ordering Information Part Number Rated Current Ordering Code Tubes – 48 pcs Ordering Code Tape & Reel – 1000 pcs SIC1182K 8A SIC1182K SIC1182K-TL © 2020 | power.com 21 / 74 SIT12xxI DC-DC Converter Family Product Title SIT1217I, SIT1253I DC-DC Transformer for SCALE-iDriver™ Gate Driver ICs Providing Reinforced Isolation Applications Key Features • • • • • • • • Industrial drives (GPD, VFD, AC drives and servo drives) LV STATCOM Uninterruptible power supplies (UPS) Photovoltaic inverters Certification • • • • • EN 61558-2-16+A1:2013 compliant 100% HIPOT test at 5.4 kV RMS 1s (pri-sec), 2.7 kV RMS 1s (sec-sec) DIN EN 61558-1 approved UL 1446 approved Halogen free and RoHS compliant 22 / 74 • • • • 1.3 W output per channel Dual-channel DC-DC transformer Choice of primary-to-secondary winding ratios Reinforced isolation for 600 V / 650 V / 1200 V IGBT and SiC MOSFET applications Designed for use with all SCALE-iDriver ICs Optimized for use in forward DC-DC converter topologies -40 °C to 105 °C operating ambient temperature ≤10 pF primary-to-secondary coupling capacitance © 2020 | power.com Key Data Overview Parameter Min Typical Power per channel (PTOT) Repetitive peak isolation voltage (VIORM) Max Unit 1.3 W 1200 V Operating ambient temperature (TA) -40 105 °C Storage temperature (TS) -30 70 °C Clearance and creepage distance primary-secondary 19 mm 10.5 mm Clearance and creepage distance secondary-secondary Coupling capacitance (CK) 10 pF 100% production withstanding isolation voltage test (VTEST, PRIM - SEC) 5400 V 100% production partial discharge test (VPD, PRIM - SEC) 2700 V Application Circuit (SIT12xxI) VISO2 VSUPPLY COM2 + - VISO1 COM1 GND VSUPPLY TRIG OUT THRES GND RESET VSUPPLY VCC GND GND CONT DISCH PI-8707-020819 Ordering Information Part Number Primary Side Input Voltage Ordering Code Tape & Reel – 115 pcs SIT1217I 15 V SIT1217I SIT1253I 5V SIT1253I © 2020 | power.com 23 / 74 Gate Driver Cores Power Integrations is a technology and market leader in mid- and high-power gate drivers. Using highly integrated technology, the company’s gate drivers employ up to 85% fewer components than other commonly-available solutions. Power Integrations has 30 years’ history of supporting demanding industries such as railway, power generation, power transmission and industrial automation with products that combine outstanding reliability, best-in-class performance and competitive pricing. Innovative Technology Everything a Designer Needs Power Integrations’ SCALE™-2 IGBT and SiC MOSFET gate drivers use an ASIC chip set specifically designed to reduce count, save space and increase product reliability and functionality. A recent technology development, SCALE-2+, enables Soft Shut Down (SSD) to be implemented in the event of a short circuit without requiring additional components (SSD function exclusive in 2SC0106T and 2SC0108T). This is particularly beneficial in applications with low strayinductance where Advanced Active Clamping (AAC) may not be required. Power Integrations’ gate driver cores incorporate driver functions including galvanic isolation, protection functions, DC-DC converter, etc., on board presenting designers with a complete yet extremely flexible system solution. Design Support and Customization Gate driver cores are available with blocking voltage capabilities from 600 V to 6500 V and output power from 1 W to 20 W per channel. They are also suitable for driving wide bandgap devices based on emerging materials such as Silicon Carbide (SiC) at frequencies of up to 500 kHz. Gate driver cores are supported by reference designs for fast design-ins. Power Integrations develops reference designs and semicustom gate drive designs based on the company’s driver cores and produces full-custom drivers using the company’s SCALE-2 platform for large projects. 24 / 74 © 2020 | power.com Gate Driver Isolation 1 2SC0106T Reinforced 2SC0108T Reinforced Gate Driver Cores 2SC0115T Reinforced 2SD300C17 Reinforced 2SC0435T Reinforced 2SC0650P Reinforced 1SC2060P Reinforced 2SC0535T Reinforced 2SC0635T Functional 1SC0450V / 1SC0450E Functional 600 650 750 1200 1700 3300 4500 6500 Semiconductor Blocking Voltage (V) 1 Gate Driver Isolation Coordination according to IEC 61800-5-1, IEC 60664-1, UL 508C and UL 60950-1 © 2020 | power.com 25 / 74 SCALE™-2+ Gate Driver Core Product Title 2SC0106T E321757 E346491 Dual-Channel Gate Driver Core for 1200 V IGBTs—The Alternative to Optocoupler Driver Solutions for Inverter Designs Requiring Reinforced Isolation up to 110 kW Applications Key Features • • • • • • • • • • • • • • • • Industrial motor drives Uninterruptible power supplies (UPS) Photovoltaic inverters Commercial e-mobility (E-bus, E-truck, CAV) Medical (MRT, CT, X-ray) Welding Certification • • Reinforced isolation according to IEC 61800-5-1 and IEC 60664-1 UL-recognized under E321757 for UL 508C and E346491 for UL 60950-1 26 / 74 Dual-channel driver core for blocking voltages up to 1200 V ±6 A peak output gate current 2 x 1 W output power High reliability (reduced component count) IGBT short-circuit protection Switching frequency up to 50 kHz Operating temperature -40 °C to +85 °C (105 °C with derating) Lead-free and RoHS compliant Soft Shut Down (SSD) Supply undervoltage lockout © 2020 | power.com Key Data Overview Parameter Min Typical Max Unit Nominal supply voltage 15 V Supply current @ fIN = 0 Hz 40 mA 300 1 +15 / -8 mA W V A kHz % mm mm VAC VPEAK kV/μs °C Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency (fS) Duty cycle Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv / dt immunity, input-to-output Operating temperature -6 0 0 9 9 4000 1800 +6 50 100 50 +105 -40 Application Circuit (2SC0106T) SOA2 VISO2 VDD VCC REF ACL GND VCE2 VISO2 AUXGH Channel 2 TRPB VE2 VCE SOA VCC 62 kΩ INP IGD GH2 GH GL2 GL TRNB INA INN VISO2 AUXGL VISO2 INA VSS INB VEE COM2 VE2 INB COM2 SO SO1 VISO2 DCDC1 COM2 SO2 LDI TB SOA1 VISO1 DCDC2 COM1 TB VISO1 62 kΩ VDD MOD VE1 REF VCE1 VCE SOA ACL VISO1 AUXGH TRPA GND INP IGD GH1 GH f GL1 GL IREF TRNA Channel 1 INN VISO1 AUXGL VSS VSS VEE VISO1 VE1 COM1 GND GND COM1 PI-8680-022720 Reference Design gate-driver.power.com/design-support/reference-designs RDHP Part Number RDHP-1423 2SC0106T Technology SCALE-2+ Channels 2 Voltage Class Power Module Package Related Power Module 600 V and 1200 V Any N/A Interface Electrical (15 V logic) Ordering Information 1 Part Number Type Designation Temperature Overvoltage Protection 2SC0106T 2SC0106T2A1-12 -40 °C to +85 °C Soft Shut Down 1 Also available with conformal coating. Please refer to the "Conformal Coating for Gate Drivers" section in this catalog. © 2020 | power.com 27 / 74 SCALE™-2+ Gate Driver Core Product Title 2SC0115T E321757 E346491 Dual-Channel Gate Driver Core—The Alternative to Optocoupler Driver Solutions for Inverter Designs up to 500 kW Power Range Applications Key Features • • • • • • Industrial motor drives Uninterruptible power supplies (UPS) Photovoltaic inverters Medical (MRT, CT, X-ray) Welding Certification • • Reinforced isolation according to IEC 61800-5-1 and IEC 60664-1 UL-recognized under E321757 for UL 508C and E346491 for UL 60950-1 28 / 74 • • • • • • • • • • Dual channel driver core for blocking voltages up to 1200 V ±15 A peak output gate current +15 V (regulated) / -6 V gate driving 2x1W High reliability (reduced component count) IGBT short-circuit protection Switching frequency up to 50 kHz Advanced Active Clamping (AAC) Lead free and RoHS compliant Supply undervoltage lockout SiC MOSFET ready © 2020 | power.com Key Data Overview Parameter Min Typical Max Unit Nominal supply voltage 15 V Supply current @ fIN = 0 Hz 40 mA Output power per channel Gate voltage Peak output current (gate current) Switching frequency (fS) Duty cycle Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv / dt immunity, input-to-output Operating temperature 1 +15 / -6 1.4 -15 0 0 9 9 4000 1800 +15 50 100 50 -40 +105 W V A kHz % mm mm VAC VPEAK kV/μs °C Application Circuit (2SC0115T) SOA2 VISO2 VDD VCC REF ACL GND VCE2 VISO2 AUXGH Channel 2 TRPB VE2 VCE SOA VCC 62 kΩ INP IGD GH2 GH GL2 GL TRNB INA INN VISO2 AUXGL VISO2 INA VSS INB VEE COM2 VE2 INB COM2 SO SO1 VISO2 DCDC1 COM2 SO2 LDI TB SOA1 VISO1 DCDC2 COM1 TB VISO1 62 kΩ VDD MOD VE1 REF VCE1 VCE SOA ACL VISO1 AUXGH TRPA GND INP IGD GH1 GH f GL1 GL IREF TRNA Channel 1 INN VISO1 AUXGL VSS VSS VEE GND VISO1 VE1 COM1 GND COM1 PI-8680-022720 Reference Design gate-driver.power.com/design-support/reference-designs RDHP Part Number RDHP-1521 2SC0115T Technology SCALE-2+ Channels 2 Voltage Class Power Module Package Related Power Module 600 V and 1200 V Any N/A Interface Electrical (15 V logic) Ordering Information 1 Part Number Type Designation Overvoltage Protection Temperature Lead Free Pin Length 2SC0115T 2SC0115T2A0-12 Advanced Active Claming -40 °C to +105 °C Yes 3.00 mm 1 Also available with conformal coating. Please refer to the "Conformal Coating for Gate Drivers" section in this catalog. © 2020 | power.com 29 / 74 SCALE™-2+ Gate Driver Core Product Title 2SC0108T E321757 E346491 Ultra-Compact Dual-Channel Gate Driver Core for up to 1700 V IGBTs Applications Key Features • • • • • • • • General purpose drives Uninterruptible power supplies (UPS) Photovoltaic and wind power inverters Railway auxiliary inverters Commercial e-mobility (E-bus, E-truck, CAV) Medical (MRT, CT, X-ray) Medium voltage drives Certification • • Reinforced isolation according to IEC 60664-1 UL-recognized under E321757 for UL 508C and E346491 for UL 60950-1 30 / 74 • • • • • • • • • • • • Dual-channel driver core for blocking voltages up to 1700 V Switching frequency up to 50 kHz ±8 A peak output gate current +15 V (regulated) / -8 V gate driving Interface for 3.3 V – 15 V logic level Direct and half bridge modes Supports two-level and multi-level topologies IGBT short-circuit protection, undervoltage lockout Isolated DC-DC converter 2 x 1 W output power Supply undervoltage lockout 45 mm x 34.3 mm footprint Lead free and RoHS compliant versions available © 2020 | power.com Key Data Overview Parameter Min Typical Max Unit Nominal supply voltage 15 V Supply current @ fIN = 0 Hz 31 mA 240 1 +15 / -8 mA W V A kHz % mm mm VAC VPEAK kV/μs Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency (fS) Duty cycle Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv / dt immunity, input-to-output -8 0 0 12.9 12.9 5000 1768 +8 50 100 75 Application Circuit (2SC0108T2D0-xx) Application Circuit (2SC0108T) VISO2 VISO2 VDD VCC REF2 REF VCE ACL GND VCC INP IGD ACL2 ACL VCC GND AUXGH Channel 2 TRPB INP IGD GH2 GH GH2 GH VCE2 VCE AUXGH Channel 2 TRPB VDD VCC VCE2 GH1 GL GL TRNB INA INN VSS INB GH1 VISO2 VEE VE2 INB COM2 SO1 SO1 SO2 DCDC1 SO2 TB VDD VISO1 COM1 TB REF1 REF VISO2 AUXGL VSS VEE VE2 INB COM2 SO1 VISO2 DCDC1 COM2 SO2 VISO1 LDI DCDC2 COM1 TB VDD VISO1 VCE1 VCE VCE VCE1 ACL MOD TB INN INA VISO1 LDI DCDC2 GND INB SO1 VISO2 COM2 SO2 TRNB INA AUXGL INA MOD ACL1 ACL MOD AUXGH AUXGH IGD IGD TRPA GND f IREF TRNA Channel 1 INN VSS VSS AUXGL GH2 IREF VISO1 TRNA Channel 1 INN VSS VEE VE1 VSS AUXGL VISO1 VEE VE1 GND GND GND GH2 GL f GL GH1 GH INP TRPA GH1 GH INP COM1 COM1 PI-8605-021820 PI-8604-041218 Reference Designs gate-driver.power.com/design-support/reference-designs Voltage Class Power Module Package Related Power Module 2 600 V, 1200 V and 1700 V Any N/A Electrical (15 V logic) 2 600 V, 1200 V and 1700 V Any N/A Electrical (15 V logic) RDHP Part Number Technology Channels RDHP-1415 2SC0108T SCALE-2+ RDHP-1531 2SC0108T SCALE-2+ Interface Ordering Information 1 Part Number Type Designation Overvoltage Protection Temperature Lead Free Pin Length 2SC0108T 1 2SC0108T2D0-12 2SC0108T2H0-17 2SC0108T2F1-17 2SC0108T2G0-17 Advanced Active Clamping Soft Shut Down Soft Shut Down Soft Shut Down -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C No Yes Yes Yes 2.54 mm 2.54 mm 5.84 mm 3.10 mm Also available with conformal coating. Please refer to the "Conformal Coating for Gate Drivers" section in this catalog. © 2020 | power.com 31 / 74 SCALE™-2+ Gate Driver Core Product Title 2SC0435T E321757 E346491 1700 V Dual-Channel Gate Driver Core Applications Key Features • • • • • • • • • Photovoltaic and wind power inverters Industrial motor drives Medium voltage drives Railway main and auxiliary inverters Uninterruptible power supplies (UPS) Commercial e-mobility (E-bus, E-truck, CAV) Medical (MRT, CT, X-ray) Industrial power supplies Certification • • Reinforced isolation according to IEC 60664-1 UL-recognized under E321757 for UL 508C and E346491 for UL 60950-1 32 / 74 • • • • • • • • • • • • • Dual-channel driver core for blocking voltages up to 1700 V Switching frequency up to 100 kHz ±35 A peak output gate current Interface for 3.3 V to 15 V logic level Direct and half bridge modes Supports two-level and multi-level topologies IGBT short-circuit protection, undervoltage lockout Advanced Active Clamping Isolated DC-DC converter 2 x 4 W output power Supply undervoltage lockout 57.2 mm x 51.6 mm footprint Lead free and RoHS compliant SiC MOSFET ready © 2020 | power.com Key Data Overview Parameter Min Typical Max Unit Nominal supply voltage 15 V Supply current @ fIN = 0 Hz 58 mA Supply current, full load 700 mA 4 W +15 / -10 V Output power per channel Gate voltage Peak output current (gate current) -35 +35 A Switching frequency (fS) 0 100 kHz Duty cycle 0 100 % Creepage distance primary-secondary 15.7 mm Clearance distance primary-secondary 15.7 mm Dielectric test voltage 5000 VAC Partial discharge extinction voltage 1768 VPEAK dv / dt immunity, input-to-output Operating temperature -40 50 kV/μs +85 °C Reference Designs gate-driver.power.com/design-support/reference-designs RDHP Part Number Technology Channels Voltage Class Power Module Package Related Power Module RDHP-1424 2SC0435T SCALE-2+ 2 1200 V and 1700 V Dual 130 mm x 140 mm power modules N/A Electrical (15 V logic) or optical RDHP-1516 RDHP-1532 2SC0435T SCALE-2+ 2 600 V, 1200 V and 1700 V Any N/A Electrical (15 V logic) Interface Ordering Information Part Number 2SC0435T 1 1 Type Designation Overvoltage Protection Temperature Lead Free Pin Length 2SC0435T2F1-17 Advanced Active Clamping -40 °C to +85 °C Yes 2.54 mm 2SC0435T2G1-17 Advanced Active Clamping -40 °C to +85 °C Yes 3.10 mm 2SC0435T2H0-17 Advanced Active Clamping -40 °C to +85 °C Yes 5.84 mm Also available with conformal coating. Please refer to the "Conformal Coating for Gate Drivers" section in this catalog. © 2020 | power.com 33 / 74 SCALE™-2 IGBT Gate Driver Core Product Title 2SD300C17 1700 V Dual-Channel Gate Driver Core Applications Key Features • • • • • • Railway main and auxiliary inverters Photovoltaic inverters Wind power inverters Medium voltage drives Industrial motor drives Certification • Reinforced isolation according to IEC 60664-1 34 / 74 • • • • • • • • • • Dual-channel driver core for blocking voltages up to 1700 V Switching frequency up to 60 kHz ±30 A peak output gate current ±15 V gate voltage 15 V logic level interface Direct and half bridge modes IGBT short-circuit protection Soft Shut Down Isolated DC-DC converter 2 x 4 W output-power Supply undervoltage lockout © 2020 | power.com Key Data Overview Parameter Min Typical Max Nominal supply voltage 15 V Supply current @ fIN = 0 Hz 65 mA Supply current @ fIN = 60 Hz 21 mA Output power 4 W +15 / -15 V Gate voltage Peak output current (gate current) -30 Switching frequency (fS 1) Duty cycle 0 +30 A 60 kHz 100 % Turn-on delay 630 ns Turn-off delay 490 ns Operating temperature 1 Unit -40 +85 °C Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Application Circuit (2SD300C17) VDC Isolation Barrier VDD VDD Fault Detection VA+ VDD SO iVCE REF VCE A Desaturation Protection VCC GND Channel A TRPA INP IGD GATE A GH SENSE A GL AUXGL TRNA CA CB VA+ VEE COM A VAVA- COM A INA DCDC1 VA- VDC VA- INB VB+ LDI Fault Detection DCDC2 MOD VB+ COM B SOA SOB VA+ COM A VSS SOA VA+ INN INA Logic for halfbridge mode VDD SO GND SOB iVCE REF VB- INP IGD VCE B Desaturation Protection AUXGL TRNB RC B GATE B GH SENSE B GL GND VSS E.B AUXGH TRPB GND RC A AUXGH VDC INB E.A Channel B VB+ VB+ INN COM B VSS VEE COM B VBVB- GND VB- PI-8682-041218 Ordering Information Part Number 2SD300C17 1 1 Type Designation Description Lead Free 2SD300C17A2 Standard version Yes 2SD300C17A3 Increased EMI capability Yes Also available with conformal coating. Please refer to the "Conformal Coating for Gate Drivers" section in this catalog. © 2020 | power.com 35 / 74 SCALE™-2 Planar Driver Core Product Title 2SC0650P Dual-Channel IGBT, MOSFET and SiC MOSFET Gate Driver Core with Planar Transformers; Highest Power Density for High Power and High Frequency; 50 A Gate Current and 2 x 6 W Output Power at 85 °C Ambient Temperature Applications Key Features • • • • • • • • • • High gate current driving applications High frequency applications Wind power inverters Induction heating Industrial motor drives Railway main and auxiliary inverters SiC MOSFET applications Certification • • Reinforced isolation according to IEC 60664-1 UL compliant 36 / 74 • • • • • • • Ultra-low-profile solution Planar transformer isolation Dual-Channel driver core for blocking voltages up to 1700 V Switching frequency up to 150 kHz ±50 A peak output gate current IGBT short-circuit protection Advanced Active Clamping 2 x 6 W output power Supply undervoltage lockout SiC MOSFET ready © 2020 | power.com Key Data Overview Parameter Min Max Unit Nominal supply voltage 15 V Supply current @ fIN = 0 Hz 61 mA Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency (fS 1) Duty cycle Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv / dt immunity, input-to-output Operating temperature 1 Typical 1335 6.5 +15 / -10 -50 +50 150 100 0 15 15 5000 1768 100 +85 -40 mA W V A kHz % mm mm VAC VPEAK kV/μs °C Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Application Circuit (2SC0650P) CSHDOWN2 VISO2 VCC VDD VCC CSHDOWN VDC GND VCC Channel 2 TRPB INP IGD VCE2 VCE ACL VDC REF2 REF ACL2 VISO2 AUXGH GH2 GH GL2 GL INN TRNB VISO2 AUXGL INA INB INA VSS INB DCDC1 SO1 SO2 VDC COM2 MOD COM2 VISO2 VE2 COM2 VISO2 COM2 SO1 CSHDOWN1 LDI VISO1 SO2 COM1 VISO1 DCDC2 TB VEE VDD TB CSHDOWN ACL INP TRPA IGD VCE1 VCE GND MOD REF1 REF ACL1 VISO1 AUXGH GH1 GH TRNA Channel 1 GL1 GL INN VISO1 AUXGL VSS VSS VEE COM1 VISO1 VE1 COM1 GND COM1 PI-8683-022520 Ordering Information Part Number Type Designation Overvoltage Protection Temperature Lead Free Pin Length 2SC0650P 2SC0650P2A0-17 2SC0650P2C0-17 Advanced Active Clamping Advanced Active Clamping -40 °C to +85 °C -40 °C to +85 °C No No 2.54 mm 5.84 mm © 2020 | power.com 37 / 74 SCALE™-2 Single-Channel Driver Core Product Title 1SC2060P Single-Channel Gate Driver Core with ±60 A Gate Current for Driving IGBT Modules and SiC MOSFET; 20 W Output Power for High Frequency Applications Up to 500 kHz Applications Key Features • • • • • • • • • • • High frequency applications High gate current driving applications Wind power inverters Railway main and auxiliary inverters Industrial motor drives Induction heating SiC MOSFET applications Certification • • Reinforced isolation according to IEC 60664-1 UL compliant 38 / 74 • • • • • • • • • Ultra-low-profile solution Planar transformer isolation Switching frequency up to 500 kHz Single-Channel gate driver for blocking voltages up to 1700 V <80 ns delay time <±1 ns jitter ±60 A peak output gate current IGBT short-circuit protection Advanced Active Clamping Isolated DC-DC converter 20 W output power Supply undervoltage lockout SiC MOSFET ready © 2020 | power.com Key Data Overview Parameter Min Typical Unit Nominal supply voltage 15 V Supply current @ fIN= 0 Hz 48 mA Supply current, full load Output power per channel Gate voltage 2131 mA 23 W +15 / -10 Peak output current (gate current) -60 Switching frequency (fS 1) V +60 A 500 kHz 100 % Duty cycle 0 Creepage distance primary-secondary 15 mm Clearance distance primary-secondary 15 mm Dielectric test voltage 5000 VAC Partial discharge extinction voltage 1768 VPEAK dv / dt immunity, input-to-output Operating temperature 1 Max -40 100 kV/μs +85 °C Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Application Circuit (1SC2060P) VCC VCC VISO2 VDC VCC GND GND TRPB VDD INP REF REF GND VCE VCE ACL INN TRNB IGD ACL VISO2 AUXGH GH GH INB INB DCDC1 SO GL GL LDI VDC SO AUXGL COM2 VISO2 VSS VEE VISO2 COM2 VISO2 VE TB TB COM2 DCDC2 GND COM2 GND VSS GND GND PI-8684-041218 Ordering Information Part Number Type Designation Overvoltage Protection Temperature Lead Free Pin Length 1SC2060P 1SC2060P2A0-17 Advanced Active Clamping -40 °C to +85 °C No 5.84 mm © 2020 | power.com 39 / 74 SCALE™-2 Gate Driver Core Product Title 2SC0535T Dual-Channel Gate Driver for 1.7 kV to 3.3 kV IGBTs and SiC MOSFETs Applications Key Features • • • • • • • • • Railway main inverters High Voltage DC transmission systems (HVDC) Flexible AC transmission systems (FACTS) STATCOM Medium voltage drives Wind power inverters Industrial motor drives 3-level Photovoltaic Inverters Certification • • Reinforced isolation according to IEC 61800-5-1 UL compliant 40 / 74 • • • • • • • • • • • • Dual-Channel driver core for blocking voltages up to 3300 V Supports two-level and multi-level topologies Switching frequency up to 100 kHz ±35 A peak output gate current Regulated gate emitter voltage Interface for 3.3 V to 15 V logic level Direct and half bridge modes IGBT short-circuit protection Supply undervoltage lockout Isolated DC-DC converter 2 x 5 W output power Operating temperature -55 °C to +85 °C SiC MOSFET ready © 2020 | power.com Key Data Overview Parameter Min Max Unit Nominal supply voltage 15 V Supply current @ fIN = 0 Hz 87 mA 900 5 +15 / -10 mA W V A kHz % mm mm VAC VPEAK kV/μs °C Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency (fS 1) Duty cycle Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv / dt immunity, input-to-output Operating temperature 1 Typical -35 0 0 44 25 9100 4125 +35 100 100 50 +85 -55 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Application Circuit (2SC0535T) CSHDOWN2 VISO2 VCC VDD VCC VDC VCC GND Channel 2 TRPB INP IGD VCE2 VCE ACL VDC REF2 REF CSHDOWN ACL2 VISO2 AUXGH GH2 GH INN TRNB GL2 GL VISO2 AUXGL INA INB INA VSS INB DCDC1 SO1 SO2 COM2 VDC MOD COM2 VE2 COM2 VISO2 COM2 SO1 CSHDOWN1 LDI VISO1 SO2 COM1 VISO1 DCDC2 TB VEE VISO2 VDD TB ACL INP TRPA IGD VCE1 VCE GND MOD REF1 REF CSHDOWN ACL1 VISO1 AUXGH GH1 GH TRNA Channel 1 GL1 GL INN VISO1 AUXGL VSS VSS VEE COM1 VISO1 VE1 COM1 GND COM1 PI-8683-022520 Reference Designs gate-driver.power.com/design-support/reference-designs RDHP Part Number Technology Channels Voltage Class Power Module Package Related Power Module RDHP-1517 2SC0535T SCALE-2 2 3300 V Any N/A Interface Electrical (15V logic) Ordering Information Part Number Type Designation Overvoltage Protection Temperature Lead Free Pin Length 2SC0535T 2SC0535T 1 2SC0535T2A1-33 2SC0535T2G0-33 Advanced Active Clamping Advanced Active Clamping -55 °C to +85 °C -55 °C to +85 °C Yes Yes 5.84 mm 3.10 mm 1 1 Also available with conformal coating. Please refer to the "Conformal Coating for Gate Drivers" section in this catalog. © 2020 | power.com 41 / 74 SCALE™-2 Gate Driver Core Product Title 2SC0635T Dual Gate Driver Cores for 4.5 V IGBTs Applications Key Features • • • • • • Railway main inverters High Voltage DC transmission systems (HVDC) Flexible AC transmission systems (FACTS) STATCOM Medium voltage drives Certification • • Isolation according to IEC 61800-5-1 UL compliant 42 / 74 • • • • • • • • • Dual-channel driver core for blocking voltages up to 4500 V ±35 A peak output gate current 2 x 6 W ouput power For 1700 V / 3300 V three-level converters Advanced Active Clamping IGBT short-circuit protection Adjustable short-circuit turn-off delay (three-level converters) Switching frequency up to 100 kHz Supply undervoltage lockout SiC MOSFET ready © 2020 | power.com Key Data Overview Parameter Min Max Unit Nominal supply voltage 15 V Supply current @ fIN = 0 Hz 130 mA Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency (fS 1) Duty cycle Creepage distance primary-secondary 880 8 mA W V A kHz % mm +15 / -10 -50 +50 10 100 0 45 Clearance distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv / dt immunity, input-to-output Operating temperature 1 Typical 25 mm 10300 5400 VAC VPEAK kV/μs °C 35 +85 -40 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Application Circuit (2SC0635T) CSHDOWN2 VISO2 VCC VDD VCC CSHDOWN VDC VCC GND Channel 2 TRPB INP IGD VCE2 VCE ACL VDC REF2 REF ACL2 VISO2 AUXGH GH2 GH GL2 GL INN TRNB VISO2 AUXGL INA INB INA VSS INB DCDC1 SO1 SO2 VDC COM2 MOD COM2 VISO2 VE2 COM2 VISO2 COM2 SO1 CSHDOWN1 LDI VISO1 SO2 COM1 VISO1 DCDC2 TB VEE VDD TB CSHDOWN ACL INP TRPA IGD VCE1 VCE GND MOD REF1 REF ACL1 VISO1 AUXGH GH1 GH TRNA Channel 1 GL1 GL INN VISO1 AUXGL VSS VSS VEE COM1 VISO1 VE1 COM1 GND COM1 PI-8683-022520 Ordering Information Part Number Type Designation Overvoltage Protection Temperature Lead Free Pin Length 2SC0635T 2SC0635T2A1-45 Advanced Active Clamping -40 °C to +85 °C Yes 3.1 mm © 2020 | power.com 43 / 74 SCALE™-2 Gate Driver Core Product Title 1SC0450V2, 1SC0450E2 High-Voltage 4.5 kV and 6.5 kV Single-Channel Gate Driver with Integrated DC-DC Converter Applications Key Features • • • • • • Railway main inverters High Voltage DC transmission systems (HVDC) STATCOM Medium voltage drives Flexible AC transmission systems (FACTS) Certification • • Isolation according to IEC 61800-5-1 UL compliant 44 / 74 • • • • • • • • Single-channel driver core for blocking voltages up to 4.5 kV and 6.5 kV ±50 A peak output gate current 6 W output power High reliability (reduced component count) Advanced Active Clamping and Dynamic Advanced Active Clamping IGBT short-circuit protection Lead free -40 °C to +85 °C Supply undervoltage lockout © 2020 | power.com Key Data Overview Parameter Min Typical Max Nominal supply voltage 15 V Supply current @ fIN = 0 Hz 130 mA Supply current, full load 880 mA 8 W Output power per channel Gate voltage +15 / -10 Peak output current (gate current) V -50 +50 A 10 kHz 100 % Switching frequency (fS 1) Duty cycle 0 Turn-on delay 135 ns Turn-off delay 105 ns Creepage distance primary-secondary 45 mm Clearance distance primary-secondary 25 mm 10300 VAC 5400 / 7800 VPEAK Dielectric test voltage Partial discharge extinction voltage dv / dt immunity, input-to-output Operating temperature 1 Unit -40 35 kV/μs +85 °C Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Application Circuit (1SC0450V) Application Circuit (1SC0450E) SO VGB COM PWM REF COM ACL VCC IGD GBS DCDC1 AUXGH VCC VDC VGB SO SO DCDC2 GND GND GND VSS VEE COM VE VDC COM IGD GND VCC GBS AUXGH GH GH GND VISO GND DCDC1 VCC VDC VGB SO COM DCDC2 GND COM GND COM0 VSS VEE COM VE Power Control Unit VSS VISO AUXGL VISO GND GL GL SO LDI VE SO COM0 Power Control Unit VSS VISO AUXGL VISO LDI SO GL ACL VISO GH GL COM ACL IN VDC GH GND VCE VCC VISO REF CSHDOWN VCC ACL VCE VE VDD Primary-Side VCE VDC GND Secondary-Side CSHDOWN GND REF VISO IN VDC CSHD OUT VCE VE VDD VCC VISO REF VISO Secondary-Side Primary-Side VGB VGB COM0 CSHD VCC VISO IN VGB COM0 VISO COM VE COM COM COM0 GND GND PI-8687-041218 PI-8688-041218 Ordering Information Part Number 1SC0450 1 1 Type Designation Description Temperature Lead Free Pin Length 1SC0450V2B0-45 Fiberoptic interface -40 °C to +85 °C Yes 5.84 mm 1SC0450V2B0-65 Fiberoptic interface -40 °C to +85 °C Yes 5.84 mm 1SC0450E2B0-45 Non-isolated electrical interface -40 °C to +85 °C Yes 5.84 mm 1SC0450E2B0-65 Non-isolated electrical interface -40 °C to +85 °C Yes 5.84 mm Also available with conformal coating. Please refer to the "Conformal Coating for Gate Drivers" section in this catalog. © 2020 | power.com 45 / 74 Plug-and-Play Gate Drivers Power Integrations is a technology and market leader in mid- and high-power gate drivers. Using highly integrated technology, the company’s gate drivers employ up to 85% fewer components than other commonly-available solutions. Power Integrations has 30 years’ history of supporting demanding industries such as railway, power generation, power transmission and industrial automation with products that combine outstanding reliability, best-in-class performance and competitive pricing. Innovative Technology Complete and Ready to Use Power Integrations pioneered the use of ASIC technology to develop highly-integrated, ultra-efficient, high-performance gate drivers. Our SCALE™-2 design methodology uses an ASIC chipset to reduce component count and save space. It is manufactured on an automotive-qualified BiCMOS wafer processing line, so performance and reliability are ensured. By owning the IC design, Power Integrations is also able to insure a long service life. Plug-and-play products are complete, ready-to-use IGBT gate drivers that have been tightly matched to a specific IGBT module. Drivers are available to cover a large selection of high-power and high-voltage IGBT modules with reverse blocking voltages from 600 V to 6500 V. All plug-and-play drivers are equipped with DC-DC converters, short-circuit protection, active clamping, supply monitoring, soft start and more. Design Support and Customisation Power Integrations develops reference designs and semicustom gate drive designs based on the company’s driver cores and produces full-custom drivers using the company’s SCALE-2 platform for large projects. 46 / 74 © 2020 | power.com Gate Driver Isolation 1 Plug-and-Play Gate Drivers 2SP0115T Reinforced 2SP0320 Reinforced 2SP0430T Reinforced 1SP0635 Reinforced Functional 1SP0335 + ISO5125I Functional 1SP0340 + ISO5125I Functional 1SP0351V Functional 600 650 750 1200 1700 3300 4500 6500 Semiconductor Blocking Voltage (V) 1 Gate Driver Isolation Coordination according to IEC 60664-1 and IEC 60077-1 © 2020 | power.com 47 / 74 SCALE™-2 Plug-and-Play Gate Driver Product Title 2SP0115T Dual-Channel Gate Driver with Electrical Interface for 17 mm Dual IGBT Modules Applications Key Features • • • • • • • • Wind power inverters Industrial motor drives Railway auxiliary inverters Induction heating Photovoltaic inverters Uninterruptible power supplies (UPS) Medical (MRT, CT, X-ray) Certification • • Reinforced isolation according to IEC 60664-1 UL compliant 48 / 74 • • • • • • • • • • • Dual-Channel Plug-and-Play IGBT driver for blocking voltages up to 1700V +15 V (regulated) / -8 V gate driving Interface for 3.3 V to 15 V logic level Direct and half bridge modes Supports two-level and multi-level topologies IGBT short-circuit protection Advanced Active Clamping Isolated DC-DC converter 2 x 1 W output power Supply undervoltage lockout Reliable, long service life Lead free and RoHS compliant version available © 2020 | power.com Key Data Overview Parameter Min Max Unit Nominal supply voltage 15 V Supply current @ fIN = 0 Hz 33 mA Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency (fS 1) Duty cycle Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage (600 V / 1200 V versions) Dielectric test voltage (1700 V version) Partial discharge extinction voltage (600 / 1200 V versions) Partial discharge extinction voltage (1700 V version) dv / dt immunity, input-to-output Operating temperature 2SP0115T2Ax-xx Operating temperature 2SP0115T2Bx-xx, 2SP0115T2Cx-xx, 2SP0115T2Dx-xx 1 Typical 220 1 +15 / -8 -8 0 0 12.6 12.3 3800 5000 1220 1768 +15 50 100 50 +85 +85 -20 -40 mA W V A kHz % mm mm VAC VAC VPEAK VPEAK kV/μs °C °C Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Application Circuit (2SP0115T) Isolation Barrier VCC RA2 VISO2 CA2 VDD RVCE COM2 VCE C2 ACL VCC VISO2 AUXGH 1 kΩ INA INA VCC GND RGON GH IGD Channel 2 TRPB INP VISO2 G2 RGOFF GL 4.7 kΩ AUXGL INB GND 1 kΩ INN TRNB INB REF VISO2 RREF 4.7 kΩ DCDC1 GND VSS COM2 SOB 33 Ω SOA 33 Ω VISO2 COM2 COM2 DCDC2 SOB E2 VEE SOA VISO1 COM1 CA1 VDD COM1 VCE VCC C1 ACL MOD MOD RM MOD VISO1 CM AUXGH INP TRPA 6.8 kΩ GND 150 kΩ VISO1 RGON GH IGD GND TB RVCE RA1 VISO1 LDI G1 RGOFF GL AUXGL TB TRNA Channel 1 INN REF VSS VSS RREF VISO1 E1 VEE GND COM1 COM1 PI-8689-041218 Ordering Information Part Number 2SP0115T 1 Type Designation Description 2SP0115T2A0 2SP0115T2B0 2SP0115T2C0 2SP0115T2D0 2SP0115T2A0-xx 2SP0115T2B0-xx 2SP0115T2C0-xx Standard version (-20 °C to +85 °C) Extended operating temperature (-40 °C to +85 °C) 15 V logic level, extended operating temperature (-40 °C to +85 °C) 15V logic level, extended operating temperature (-40 °C to +85 °C), lead free xx: either voltage basic type 2 or specific module type xx: either voltage basic type 2 or specific module type xx: voltage basic type 2 xx: specific module type (Infineon, Fuji, Mitsubishi, ABB) such as 2MBI300VN-120-50 xx: voltage basic type xx = 06 (600 V) / xx = 12 (1200 V) / xx = 17 (1700 V) 1 Also available with conformal coating. Please refer to the "Conformal Coating for Gate Drivers" section in this catalog. 2 Gate resistors have to be soldered by customer © 2020 | power.com 49 / 74 SCALE™-2 Plug-and-Play IGBT Gate Driver Product Title 2SP0320T2, 2SP0320V2 Dual-Channel Gate Driver for PrimePACK™ and Equivalent IGBT Modules with Electrical or Fiberoptic Interfaces Applications Key Features • • • • • • • • Wind power inverters Industrial motor drives Railway auxiliary inverters Induction heating Commercial air conditioners Uninterruptible power supplies (UPS) Medical (MRT, CT, X-ray) Certification • • Reinforced isolation according to IEC 60664-1 UL compliant • • • • • • • • • • Dual-Channel plug-and-play IGBT gate driver for blocking voltages up to 1700 V Interface for 3.3 V to 15 V logic level Electrical or fiberoptic interfaces +15 V (regulated) / -10 V gate driving Easy mounting directly onto the IGBT S upports two-level and three-level converter topologies IGBT short-circuit protection Advanced Active Clamping Isolated DC-DC converter Supply undervoltage lockout Lead free and RoHS compliant version available PrimePACK™ is a registered trademark of Infineon Technology AG 50 / 74 © 2020 | power.com Key Data Overview Parameter Min Max Unit Nominal supply voltage 15 V Supply current 2SP0320T2xx @ fIN = 0 Hz 56 mA 164 600 690 3 +15 / -10 mA mA mA W V A kHz % mm VAC VPEAK kV/μs °C Supply current 2SP0320V2xx and 2SP0320S2xx @ fIN = 0 Hz Supply current, full load 2SP0320T2xx Supply current, full load 2SP0320V2xx and 2SP0320S2xx Output power per channel Gate voltage Peak output current (gate current) Switching frequency (fS 1) Duty cycle Creepage distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv / dt immunity, input-to-output Operating temperature 1 Typical -20 0 0 20 5000 1768 +20 30 100 50 +85 -40 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Application Circuit (2SP0320x2) VISO2 External Fiber Optic Link + FOIN (Drive Signal) VDD COM2 VCE C2 ACL SO External Fiber Optic Link (Status Feedback) VISO2 VDC AUXGH VDC VCC GND VCC Isolation Barrier VCC COM2 GH IGD Channel 2 GL SO COM2 RREF VISO2 E2 VEE VSS COM2 LDI G2 REF DCDC1 33 Ω RG(ON) RG(OFF) AUXGL GND SO VISO2 VISO2 GND COM2 COM2 DCDC2 VISO1 TRPA GND VSS GND COM1 VISO1 VDD COM1 VCE C1 ACL GND VISO1 Channel 1 External Fiber Optic Link + (Drive Signal) AUXGH GH IGD FOIN GL VISO1 RG(ON) G1 RG(OFF) AUXGL SO External Fiber Optic Link COM1 RREF (Status Feedback) VISO1 REF COM1 VSS E1 VEE COM1 COM1 PI-8691-030420 Ordering Information 2SP0320T2 1 Type designation xx: Voltage basic type 1 or xx: Specific module typical Input signal interface On-board connector 1 2SP0320V2 1 2SP0320T2A0-xx 2SP0320V2A0-xx 2SP0320T2C0-12, 2SP0320T2D0-12 2SP0320V2D0-12 2SP0320T2C0-17 , 2SP0320T2D0-17 2SP0320V2D0-17 xx = 12 (1200 V) / xx = 17 (1700 V) xx = e.g., 2MBI900VXA-120E-50 Electrical interface 2SP0320T2A0: 3.3-15 V logic level A0: Versatile FO input / output 2SP0320T2C0: 15 V logic level 2SP0320T2D0: 15V logic level, lead free D0: Versatile FO input / output, lead free DIC20 HFBR 2522ETZ / 1522ETZ Gate resistors must be soldered by customer © 2020 | power.com 51 / 74 SCALE™-2 Plug-and-Play IGBT Gate Driver Product Title 2SP0430T2 Dual-Channel Gate Driver for PrimePACK™ 3+ and Equivalent Power Modules Applications Key Features • • • • • • Wind power inverters Photovoltaic inverters Uninterruptible power supplies (UPS) Industrial motor drives Railway main and auxiliary inverters Certification • • Reinforced isolation according to IEC 60664-1 UL compliant • • • • • • • Dual-channel plug-and-play IGBT gate driver for blocking voltages up to 1700 V in three level topologies +15 V (regulated) / -10 V gate drive Supports three-level converter topologies IGBT short-circuit protection Isolated DC-DC converter Supply undervoltage lockout Dynamic Advanced Active Clamping (DAAC) Conformal coating PrimePACK™ is a registered trademark of Infineon Technology AG 52 / 74 © 2020 | power.com Key Data Overview Parameter Min Typical Nominal supply voltage (VVDD), (VVCC) Unit 480 mA 2 30 W A kHz mm mm VRMS VRMS VPEAK VPEAK kV/µs °C 15 V Supply current, full load (IVDC) Output power per channel (Pgx) Peak output current (gate current) Switching frequency fSW Creepage distance primary-secondary (CPGP-S) Clearance distance primary-secondary (CPGS-S) Dielectric test voltage A-Type (Viso,ps) Dielectric test voltage B-Type (Viso,ps) Partial discharge extinction voltage A-Type (PD,ps) Partial discharge extinction voltage B-Type (PD,ps) dv / dt immunity, input-to-output Operating temperature 1 Max -30 10 30 12.6 5000 9100 1768 3100 50 85 -40 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Application Circuit (2SP0430T2xx) VISO2 VDC VCC GND INA Signal Conditioning INA VCC Isolation Barrier VCC DA2C VDD VDC COM2 VCE C2 ACL VISO2 AUXGH GND Channel 2 TRPB GH IGD INP GL VISO2 RG(ON) G2 RG(OFF) AUXGL INB Signal Conditioning COM2 INN TRNB INB VISO2 REF DCDC1 VCC COM2 VISO2 GND SO2 E2 VEE VSS COM2 COM2 DCDC2 SOB VISO1 LDI GND VCC VISO1 COM1 DA2C VDD COM1 VCE C1 ACL SO1 VISO1 SOA AUXGH GH IGD INP TRPA GL VISO1 RG(ON) G1 RG(OFF) AUXGL TRNA Channel 1 COM1 INN VISO1 REF VSS GND VSS GND COM1 E1 VEE COM1 PI-8692-030420 Ordering Information 1 Part Number Type Designation Description 2SP0430T2A 2SP0430T2B 2SP0430T2A0C-xx 2SP0430T2B0C-xx 1 For 2-level operation For 3-level operation 1 xx: specific module type, e.g. FF1800R17IP5 © 2020 | power.com 53 / 74 SCALE™-2 Plug-and-Play IGBT Gate Driver Product Title 1SP0635V2 Single-Channel Plug-and-Play Gate Driver for 1.2 kV, 1.7 kV and 3.3 kV IHM modules– Supports Direct Paralleling with Master / Slave Configuration Applications Key Features • • • • • • • Railway main inverters Railroad power supplies High Voltage DC transmission systems (HVDC) Flexible AC transmission systems (FACTS) Medium voltage drives Industrial motor drives Certification • • Isolation according to IEC 60077-1 UL compliant 54 / 74 • • • • • • • • • • Single-channel plug-and-play gate driver for blocking voltages up to 3300 V Fiberoptic interfaces +15 V (regulated) / -10 V gate driving Direct paralleling of IGBTs Supports two-level and multi-level topologies IGBT short-circuit protection Dynamic Advanced Active Clamping (DAAC) Built-in isolated DC-DC converter Supply undervoltage lockout Easy mounting directly onto the IGBT Extremely reliable, long service life © 2020 | power.com Key Data Overview Parameter Min Max Unit Nominal supply voltage 15 V Supply current 1SP0635x2Mx @ fIN = 0 Hz 120 mA 35 325 3 2.6 +15 / -10 mA mA W W V A kHz % mm mm VAC VPEAK °C Per additional 1SP0635D2Sx @ fIN = 0 Hz Supply current, full load 1SP0635x2Mx Output power (1SP0635V2Mx or 1SP0635SMx) Output power (1SP0635D2Sx) Gate voltage Peak output current (gate current) Switching frequency (fS 1) Duty cycle Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage (3.3 kV versions) Partial discharge extinction voltage (3.3 kV versions) Operating temperature 1 Typical -35 0 0 21 21 6000 3630 -40 +35 30 100 +85 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Application Circuit (1SP0635) 4-Pin 15 V Power Supply Interface X1 = RG(OFF) Dynamic VCE Monitoring = Power Supply Monitoring Dynamic Advanced Active Clamping DZ C +15 V Gate Monitoring FOL Input G RG(ON) FOL Status Output CGE Turn-On Driver * RG(OFF) X2 6-Pin Paralleling Interfaces E *= Optional Turn-Off Driver Paralleling Interface 1SP0635V X3 Dynamic Advanced Active Clamping DZ C +15 V Gate Monitoring Power Supply Monitoring G RG(ON) Turn-On Driver Paralleling Interface RG(OFF) X2 CGE * E *= Optional Turn-Off Driver 6-Pin Paralleling Interfaces 1SP0635D X3 PI-8694-041218 Ordering Information V-Type (Master) Type designation plus xx: Voltage basic type or xx: Specific module type Module package Input signal interface On-board connector Bus interface On-board connector Connecting cable Power supply Connecting cable 1 S-Type (Master) 1SP0635V2M1-xx 1 1SP0635S2M1-xx 1 xx = 12 (1200 V); xx = 17 (1700 V); xx = 33 (3300 V) e.g., 5SNA1200E330100 IHM 130 / 140; 190 / 140 Versatile FOL input / output ST FOL input / output HFBR-1522ETZ / 2522ETZ HFBR1412Z / 2412Z D-Type (Slave) 1SP0635D2S1-xx 1 N/A N/A MBCON-6-1-0 MBC61-xxx-0 (xxx = 030, 050, 070, 110) MBC41-xxx-0 (xxx = 035, 045, 070) N/A Also available with conformal coating. Please refer to the "Conformal Coating for Gate Drivers" section in this catalog. © 2020 | power.com 55 / 74 SCALE™-2 Plug-and-Play IGBT Gate Driver Product Title 1SP0340V2 and DC-DC Converter ISO5125I Compact Plug-and-Play Gate Driver for 4.5 kV IGBT Modules in a Low-Voltage (6 kV) Package Applications Key Features • • • • • • • • • • • • • • • • • • Railway main inverters High Voltage DC transmission systems (HVDC) Medium and high-voltage drives Pulse power applications Flexible AC transmission systems (FACTS) STATCOM Certification • • Creepage and clearances according to IEC 60077-1 UL compliant 56 / 74 Single-channel plug-and-play gate driver Fiberoptic interfaces +15 V (regulated) / -10 V gate driving Direct paralleling of IGBTs Supports two-level and multi-level topologies IGBT short-circuit protection Dynamic Advanced Active Clamping (DAAC) Supply undervoltage lockout Gate monitoring Active Miller clamping Easy mounting directly onto the IGBT External DC-DC converter ISO5125I necessary © 2020 | power.com Key Data Overview Parameter 1 Min Typical Max Unit Nominal supply voltage 25 V Supply current 1SP0340V2M0 @ fIN = 0 Hz 180 mA Output power (1SP0340V2M0) Gate voltage Peak output current (gate current) Switching frequency (fS 1) Duty cycle Operating temperature 2.8 ±15 W V A kHz % °C -35 0 0 -40 +35 30 100 +85 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Application Circuit (1SP0340 and ISO5125I) High-Voltage Insulated DC-DC Power Supply 3-Pin DC-DC Input X0 X1 4-Pin 25 V X403 Dynamic VCE Monitoring IS05125I Power Supply Monitoring C Dynamic Advanced Active Clamping Gate Monitoring FOL Input G RG(ON) FOL Status Output E Turn-On Driver RG(OFF) X401 6-Pin Paralleling Interfaces Paralleling Interface Turn-Off Driver X402 C Dynamic Advanced Active Clamping Power Supply Monitoring Gate Monitoring G RG(ON) E Turn-On Driver X401 RG(OFF) Paralleling Interface Turn-Off Driver 6-Pin Paralleling Interfaces X402 PI-8695-022820 Fiberoptic links are used to electrically isolate the command and status feedback signals Ordering Information V-Type (Master) Type designation plus xx: Voltage basic type or xx: Specific module type Module package DC-DC converter Input signal interface On-board connector Bus interface Connecting cable Power supply Connecting cable driver / ISO Connecting cable ISO / user board © 2020 | power.com D-Type (Slave) 1SP0340V2M0-xx 1SP0340D2S0-xx 4500 V = 45 e.g., FZ1200R45HL3 IHV 130 / 140; 190 / 140 ISO5125I-xx (xx: 4500 V = 45; 6500 V = 65; 10000 V = 100; 12000 V = 120) Versatile FOL input / output N/A HFBR-2522ETZ / 1522ETZ N/A MBC61-xxx-0 (xxx = 030, 050, 070, 110) MBC41-xxx-0 (xxx = 035, 045, 070, 110) MBC31-100-0 57 / 74 SCALE™-2 Plug-and-Play IGBT Gate Driver Product Title 1SP0335 and DC-DC Converter ISO5125I Single-Channel Plug-and-Play Gate Driver for 3.3 kV to 6.5 kV with Separate Power Supply Unit for IGBT Modules in High-Voltage (10.2 kV) Package Applications Key Features • • • • • • • • • • • • • • • • • Railway main inverters Railroad power supplies High Voltage DC transmission systems (HVDC) Flexible AC transmission systems (FACTS) Medium and high-voltage drives Industrial motor drives Certification • • Creepage and clearances according to IEC 60077-1 UL compliant 58 / 74 Single-channel plug-and-play gate driver Fiberoptic interfaces +15 V (regulated) / -10 V gate driving Direct paralleling of IGBTs Supports two-level and multi-level topologies Dynamic IGBT short-circuit protection Dynamic Advanced Active Clamping (DAAC) Supply undervoltage lockout Easy mounting directly onto the IGBT Extremely reliable, long service life External DC-DC converter ISO5125I necessary © 2020 | power.com Key Data Overview Parameter 1 Min Typical Max Unit Nominal supply voltage 25 V Supply current 1SP0335x2Mx @ fIN = 0 Hz 45 mA Per additional 1SP0335D2Sx @ fIN = 0 Hz Output power (1SP0335V2Mx) Output power (1SP0335D2Sx) Gate voltage Peak output current (gate current) Switching frequency (fS 1) Duty cycle Operating temperature 20 3.5 3.3 +15 / -10 mA W W V A kHz % °C -35 0 0 -40 +35 30 100 +85 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Application Circuit (1SP0335 and DC-DC ISO5125I) High-Voltage Insulated DC-DC Power Supply 3-Pin DC-DC Input X1 X0 4-Pin 25 V X403 Dynamic VCE Monitoring IS05125I Power Supply Monitoring C Dynamic Advanced Active Clamping Gate Monitoring FOL Input G RG(ON) E Turn-On Driver FOL Status Output RG(OFF) X401 6-Pin Paralleling Interfaces Paralleling Interface Turn-Off Driver 1SP0335V X402 C Dynamic Advanced Active Clamping Power Supply Monitoring Gate Monitoring G RG(ON) E Turn-On Driver X401 Paralleling Interface RG(OFF) Turn-Off Driver 6-Pin Paralleling Interfaces X402 1SP0335D PI-8697-022820 Ordering Information V-Type (Master) Type designation plus xx: Voltage basic type or xx: Specific module type Module package DC-DC converter Input signal interface On-board connector Bus interface Connecting cable Power supply Connecting cable driver / ISO Connecting cable ISO / user board 1 S-Type (Master) 1SP0335V2M1-xx 1 1SP0335S2M1-xx 1 3300 V=33 / 4500 V=45 / 6500 V=65 e.g., FZ1200R45HL3 IHV 130 / 140; 190 / 140 ISO5125I-xx (xx: 4500 V = 45; 6500 V = 65; 10000 V = 100; 12000 V = 120) Versatile FOL input / output ST FOL input / output HFBR-2522ETZ / 1522ETZ HFBR-2412Z / 1412Z D-Type (Slave) 1SP0335D2S1-xx 1 N/A N/A MBC61-xxx-0 (xxx = 030, 050, 070, 110) MBC41-xxx-0 (xxx = 035, 045, 070, 110) MBC31-100-0 Also available with conformal coating. Please refer to the "Conformal Coating for Gate Drivers" section in this catalog. © 2020 | power.com 59 / 74 SCALE™-2 Plug-and-Play 1SP0351V2 Single-Channel Plug-and-Play Gate Driver for 4500 V Press Pack IGBT and IEGT Applications Key Features • • • • • • • • • • • High Voltage DC transmission systems (HVDC) Railway main inverters STATCOM Medium voltage drive Certification • Creepage and clearances according to IEC standards • • • 60 / 74 Single-channel gate driver Compact autonomous plug-and-play solution Suitable for Press Pack and modules Fiberoptic interface +15 V / -10 V gate driving Regulated gate voltage IGBT/IEGT short-circuit protection and over-current protecion Dynamic Advanced Active Clamping (DAAC) Built-in isolated and regulated DC-DC converter DC-DC overload monitoring © 2020 | power.com Key Data Overview Parameter Nominal supply voltage Min Typical Max Unit 0 15 16 V Supply current @ fIN = 0 Hz TBD mA Supply current, full load nn mA Output power 3 W +15 / -10 V Gate voltage Peak output current (gate current) -50 Switching frequency (fS 1) Test voltage A 2 kHz 10200 VRMS Creepage distance on PCB primary-secondary 45 mm Clearance distance primary-secondary 25 mm Test voltage 10200 VISO,PS Partial discharge extinction voltage (3.3 kV versions) 5400 VPEAK Operating temperature 1 +50 -40 +85 °C Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Application Circuit (1SP0351V2xx) COM RA VISO External Fiber Optic Link + FO (Drive Signal) VDD SC–Detection RVCE DA2C VCE C ACL SO External Fiber Optic Link (Status Feedback) VISO VDC AUXGH VDC COM IGD GH AUXGL GND VCC REF GND DCDC1 VSS COM LDI GND COM VISO CGE E VEE VISO COM GND Isolation Barrier VSS RREF GND DCDC2 GND G RG(OFF) GL VCC VISO RG(ON) PI-8696-022820 Ordering Information Part Number Type Designation Description 1SP0351V2A 1SP0351V2B 1SP0351V2C 1SP0351V2D 1SP0351V2A0C-xx 1SP0351V2B0C-xx1 1SP0351V2C0C-xx1 1SP0351V2D0C-xx1 For StakPak IGBT modules For StakPak IGBT modules For Press Pack and IHV modules For Press Pack and IHV modules © 2020 | power.com 1 61 / 74 DC-DC Converter ISO5125I Product Title for SCALE™-2 Plug-and-Play Gate Drivers For 3.3 kV to 6.5 kV SCALE-2 Plug-and-Play Gate Drivers Electrical Insulation And Power Supply with ISO5125I The ISO5125I is a single-channel isolated DC-DC converter suitable as a power supply for IGBT drivers up to 6.5 kV. It complements Power Integrations’ 1SP0335 and 1SP0340 high voltage plug-and-play gate drivers. Its output power of 5 W enables switching frequencies up to 5 kHz. It enables IGBTs drivers in the 3.3 kV to 6.5 kV voltage range to be implemented in two-level, three-level and multi-level inverter topologies. The driver unit is mounted directly onto the IGBT module by means of three screws. The power supply unit ISO5125I is designed as a separate module, to be attached close to the IGBT. For parallel-connected drivers, only one power supply is needed per switch. Applications Key Features • • • • • • • • • • • • • Railway main inverters Railroad power supplies STATCOM High Voltage DC transmission systems (HVDC) Flexible AC transmission systems (FACTS) Medium and high-voltage drives Industrial motor drives 62 / 74 Operating voltage up to 12 kV peak Dielectric test voltage up to 18 kVAC Creepage distance 60 mm Output power 5 W Reliable, long service life Outstanding coupling capacitance 4 pF Part Number Type Designation Description ISO5125I ISO5125I-xx xx 45 = 4500 V; 65 = 6500 V; 100 = 10000 V; 120 = 12000 V © 2020 | power.com Application Notes For better understanding and easier design with SCALE™ gate drivers, Power Integrations offers detailed application notes with test data, PCB layout references, topology application suggestions and other useful information. • • Typical application failures EMI requirements • • Clearance and creepage distances for PCB External implementation guidance Key Application Notes AN-1001: IGBT and SiC MOSFET Drivers Correctly Calculated AN-1301: Do’s and Don’ts with SCALE-2 Gate Drivers This application note describes the calculation of gate driver performance figures required for a given application. The values derived from this application note serve as a basis for selecting the most appropriate driver. This application note highlights important points that must be considered when using SCALE-2 driver cores, as well as plug-and-play drivers (complements Application Note AN-1101). AN-1101: Application with SCALE™-2 and SCALE-2+ Gate Driver Cores AN-1601: Controlling SiC MOSFET Power Switches with SCALE-2 and SCALE-2+ Gate Drivers Cores and SCALEiDriver Gate Driver ICs This application note highlights important design rules and helps to speed up development time by showing detailed examples about how to successfully design IGBT drivers for industrial and railway applications. Considered SCALE driver cores are: 2SC0108T, 2SC0435T, 2SC0650P and 1SC2060P. This application note discusses procedures to use SCALE gate drivers with SiC MOSFET switches. More Application Notes available for download here: gate-driver.power.com/design-support/application-notes 63 / 74 © 2020 | power.com Conformal Coating for Gate Drivers In-Line Conformal Coating Enhances Reliability and Protection Applications Key Features • • • • • • Offshore and onshore wind parks Railway main and auxiliary inverters High Voltage DC transmission systems (HVDC) Photovoltaic inverters Medium voltage drives in mining and oil and gas industry • • Qualification • • • • • • • • • • Qualification is based on tests in accordance with IEC 60068-2-xx Vibration (sinusoidal) test parameters according to IEC 60068-2-6:2008-10 Shock test parameters according to IEC 60068-2-27:2010-02 Damp heat, steady-state test parameters according to IEC 60068-2-78:2012-10 Cold test parameters according to IEC 60068-2-1:2007-03 Dry heat test parameters according to IEC 60068-2-2:2007-07 Thermal cycle test parameters according to IEC 60068-2-14:2009-01 Salt mist test parameters according to IEC 60068-2-11 64 / 74 • Reduced total cost of ownership and streamlined production Internal solutions and specialized subcontractors become obsolete Full conformal coating qualification with testing in accordance with IEC 60068-2 standards Controlled process with 100% automatic optical inspection at end-of-line SCALE™-2+ gate driver cores retain UL recognition • E321757 for UL 508C (NMMS2/8) • E346491 for UL 60950-1C (NWGQ2/8) Extended warranty available with conformal coating © 2020 | power.com Conformal Coating – In-Line Process Flow Washing Loading Double Side Coating Drying AOI Packing & Shipping Typical Coated and Keep Out Areas (2SP0320V2Ax-xxxx) Keep Out Area Coated Area Ordering Information Part Number Part Number Part Number 2SC0106T2A1C-12 (1) 2SP0115T2A0C-xxxx (2) 2SC0115T2A0C-12 2SC0108T2F1C-17 (1) 2SP0115T2B0C-xxxx (2) 2SD300C17A2C 2SC0108T2G0C-17 (1) 2SP0115T2C0C-xxxx (2) 2SD300C17A3C 2SC0108T2H0C-17 (1) 1SP0335V2M1C-xxxx (2) 2SC0535T2A1C-33 2SC0108T2D0C-12 (1) 1SP0335S2M1C-xxxx (2) 2SC0535T2G0C-33 2SC0435T2F1C-17 1SP0335D2S1C-xxxx (2) 1SP0635V2M1C-xxxx 2SC0435T2G1C-17 (1) 1SC0450E2B0C-xx 1SP0635S2M1C-xxxx 2SC0435T2H0C-17 (1) 1SC0450V2B0C-xx 2SP0320T2A0C-xxxx Other Products On Request © 2020 | power.com 65 / 74 Burn-In for Gate Drivers Enhanced Field Reliability Applications Key Features • • • • Burn-In Process • • 100% production test Burn-in profile • 23 hour burn-in cycle • Controlled oven profile • Three cycles -40 °C to +85 °C (258 minutes) • 1092 minute dwell-time at 85 °C • 30 minute off-time at 25 °C • Customer-specific burn-in profile on request • • • Reduces total cost of ownership and streamlines production Eliminates challenges posed by in-house solutions and removes the need for specialized subcontractors Reduces failure rate by up to 15 PPM Extended warranty available with burn-in Burn-In Profile 90 70 Temperature (°C) Mission-critical and high reliability systems Transportation Electrical generation and transmission 50 30 10 -10 -30 -50 0 200 400 600 800 1000 1200 1400 Time (Min) 66 / 74 © 2020 | power.com Burn-In – In-Line Process Flow SMD Assembly THT Assembly Functional Test Burn-In Functional Test Coating Packing & Shipping Increase Reliability Power Integrations gate driver products for demanding applications with >100,000 hour operating lifetime. Burn-in test eliminates infant mortality improving system reliability and reducing maintenance challenges. Constant Failure Rate (Useful Life) Wear Out Failure Rate Infant Mortality t infant © 2020 | power.com Time (t) t operation 67 / 74 Product SiC MOSFET TitleGate Driver Cores 600 V – 4500 V Key Features • • • • • Variable gate voltage by VEE circuit 0 V – 25 V, 0 V – 10 V = 28 V ≤2 μs short-circuit response time High output current capability High isolation capability Advance active clamping with dv / dt feedback • • • • • • 22 ACL2 29 GL2 21 COM2 28 GH2 27 VISO2 20 GL2 Channel 2 19 VCE2 18 GH2 17 VISO2 TB 1 16 SOA2 SO 2 VCC 3 GND 4 INB 5 INA 6 15 VE2 IGBT Driver 2SC0115T High switching frequency up to 500 kHz SiC MOSFET breakdown voltage up to 4.5 kV High MTBF / low FITrate Broad portfolio Suitable for all SiC MOSFET designs Application defaults by request VDC 1 SO1 2 23 VCE2 MOD 4 TB 5 VCC 6 GND 7 13 COM1 12 GL1 INA 8 22 ACL2 IGBT Driver 2SC0435T 18 GL1 17 GH1 16 VISO1 INB 9 GND 10 Channel 1 15 VE1 14 COM1 9 VISO1 13 REF1 8 SOA1 12 VCE1 7 VE1 PI-8257-020717 16 GL VCC 1 24 REF2 SO2 3 14 ACL1 11 VCE1 Channel 1 10 GH1 Channel 2 26 VE2 25 COM2 15 COM 14 VISO 3 GND 4 5 SID1182K SCALE-iDriver 13 GH 12 VGXX 6 11 VCE IN 7 10 VEE SO 8 9 NC PI-8259-020717 11 ACL1 PI-8258-061517 Pinning of SCALE™ gate driver cores 2SC0115T, 2SC0435T, and driver IC SID1182K with marked VEx / VEE pins 68 / 74 © 2020 | power.com 22 ACL2 R1 4.7 Ω 21 COM2 20 GL2 C3 VISO IR2 R2 IR3,R4 C1 4.7 µF C2 10 nF + Channel 2 IC1 R5 LT1637 4.7 Ω IS1 R3 GND 4 INB 5 INA 6 R4 16 SOA2 SO 2 VEE S1 TL431BFDT C4 COM 18 GH2 17 VISO2 TB 1 VCC 3 19 VCE2 15 VE2 IGBT Driver 2SC0115T 14 ACL1 COM1 13 12 GL1 VCE1 11 Channel 1 10 GH1 VISO1 9 PI-8254-020717 VEE-Regulator for SiC MOSFET switches with regulated positive rail 8 SOA1 7 VE1 Ca D2 Ra D1 Rc Rvcex Rvce1 Q1 PI-8256-031617 Modified setting for SiC MOSFET short-circuit detection Gate Driver Cores 2SC0115T2A0-12 2SC0435T2xx-17 2SC0535T2xx-33 2SC0635T2A1-45 2SC0650P2x0-17 1SC2060P2A0-17 Application Note AN-1601 Controlling SiC MOSFET Power Switches with SCALE™-2 and SCALE-2+ Gate Driver Cores Application Note AN-1601 Controlling SiC MOSFET Power Switches with SCALE-2 and SCALE-2+ Gate Drivers Cores © 2020 | power.com Besides driving conventional Si-based power devices like IGBTs and MOSFETs, which require turn-on and turn-off gate voltages of 15 V / -10 V and 10 V through 20 V / 0 V respectively, SCALE-2 and SCALE-2+ gate driver cores are also able to drive SiC MOSFET power switches. However, SiC switches often require turn-on and turn-off voltage levels which are different from those required by Si-based devices. 69 / 74 SCALE-iFlex™ Isolated Master Control (IMC), Module Adapted Gate Driver (MAG) Full Galvanic Reinforced Isolation Gate Driver for 1700 V and 3300 V High-Power Dual IGBT Modules Applications Key Features • • • • • • • • • • • Wind power inverters Photovoltaic inverters Railway main and auxiliary inverters Industrial motor drives Other industrial applications Certification • Reinforced insulation in accordance with EN-50124-1, IEC 61800-5-1 and UL 61800-5-1 70 / 74 • • Optimized for driving up to 4 power modules in parallel Electrical primary-side interface with reinforced isolation Optimized for paralleling of up to 4 power modules Wide input supply voltage range +15 V to +48 V -40 °C to +85 °C operating ambient temperature Short-circuit protection with Advanced Soft Shut Down (ASSD) NTC temperature sensing with reinforced isolated DC-link voltage measurement with reinforced isolated (up to 3300 V) © 2020 | power.com Key Data Overview (1.7 kV – 3.3 kV, Electrical Interface) Isolated Master Control (IMC) Parameter Min Max Unit 50.4 V Switching frequency (fS) 25 kHz Gate output power per channel (PIMC(GX)) 4 W Common-mode transient immunity 50 kV/µs Primary-side supply voltage (VVCC)) Test voltage primary to secondary (VISO(PS)) 10800 VRMS Test voltage secondary to secondary (VISO(SS)) 6700 VRMS Module Adapted Gate Driver (MAG) Parameter Min Max Unit Gate output power per channel (PMAG(X)) 1 W Gate peak current (IGATE(PK)) 20 A SCALE-iFlex Functional Description Channel 1 Cables IMC MAG #1 MAG #2 MAG #3 MAG #4 Signal IN1 IN2 SO1 SO2 VCC Driver Channel 1 Driver Channel 1 Driver Channel 1 Driver Channel 1 Pre-Driver Channel 2 Driver Channel 2 Driver Channel 2 Driver Channel 2 Driver Channel 2 Primary Side Controller TPM DLK GND DC / DC Pre-Driver Channel 1 Signal DC / DC V15 © 2020 | power.com 15 V Channel 2 Cables PI-8948-041519 71 / 74 Drawings Notes WORLDWIDE SALES SUPPORT LOCATIONS WORLD HEADQUARTERS INDIA (BANGALORE) SINGAPORE 5245 Hellyer Avenue San Jose, CA 95138 USA Bangalore 560052 India 51 Newton Road #20-01/03 Goldhill Plaza Singapore 308900 Phone Fax +1 408 414 9200 +1 408 414 9201 Customer Service Phone Email +1 408 414 9520 usasales@power.com AMERICAS - EAST Phone 1 Phone 2 Email +91 80 4113 8020 +91 80 4113 8028 indiasales@power.com INDIA (MUMBAI) Unit 106-107, Sagar Tech Plaza-B Sakinaka, Andheri Kurla Road Mumbai-400072, Maharashtra, India 7360 McGinnis Ferry Road, Suite 225 Suwanee, GA 30024 USA Phone 1 Phone 2 Email Phone Email INDIA (NEW DELHI) +1 678 957 0724 usasales@power.com AMERICAS - CENTRAL 3100 Dundee Road, Suite 204 Northbrook, IL 60062 USA Phone Email +1 847 721 6293 usasales@power.com CHINA (SHANGHAI) Room 1601-1603, Charity Plaza No. 88 North Caoxi Road Shanghai, China 200030 Phone Email +86 021 6354 6323 chinasales@power.com CHINA (SHENZHEN) 17/F, Hivac Building, #2 Keji South 8th Road, Nanshan District Shenzhen, China 518057 Phone Email +86 755 8672 8689 chinasales@power.com GERMANY (AC-DC / LED SALES) Einsteinring 24 85609 Dornach / Aschheim Germany Phone Email +49 89 5527 39100 eurosales@power.com GERMANY (GATE DRIVERS SALES) +91 22 4003 3700 +91 22 4003 3600 indiasales@power.com #45, Top Floor Okhla Industrial Area, Phase-III New Delhi, India Pin-110020 Phone 1 Phone 2 Email +91 11 4055 2351 +91 11 4055 2353 indiasales@power.com Phone +65 6358 2160 Customer Service Phone Email +65 6356 4480 singaporesales@power.com SWITZERLAND Johann-Renfer-Strasse 15 2504 Biel / Bienne, Switzerland Phone Email +41 32 344 47 47 gate-drivers.sales@power.com TAIWAN 5F, #318, NeiHu Road, Section 1 Neihu District Taipei, Taiwan 114, ROC Phone Email +886 2 26594570 taiwansales@power.com ITALY UNITED KINGDOM Via Milanese 20 20099 Sesto San Giovanni (MI) Italy Building 5, Suite 21 The Westbrook Centre Milton Road, Cambridge CB4 1YG Phone Email Phone Email +39 02 4550 8708 eurosales@power.com +44 7823 557484 eurosales@power.com JAPAN Yusen Shin-Yokohama 1-chome Building 1-7-9, Shin-Yokohama, Kohoku-ku, Yokohama-shi, Kanagawa Japan 222-0033 Phone Email +81 45 471 1021 japansales@power.com KOREA Room 602, 6th Floor, #22 Teheran-ro 87-gil, Gangnam-gu Seoul 06164, Korea Phone Email + 82 2 2016 6610 koreasales@power.com HellwegForum 1 59469 Ense Germany Phone Email +49 29 3864 39990 gate-drivers.sales@power.com Power Integrations, the Power Integrations logo, BridgeSwitch, CAPZero, ChiPhy, CHY, DPA-Switch, EcoSmart, E-Shield, eSIP, eSOP, FluxLink, HiperPLC, HiperPFS, HiperTFS, InnoMux, InnoSwitch, Innovation in Power Conversion, InSOP, LinkSwitch, LinkZero, LYTSwitch, SENZero, TinySwitch, TOPSwitch, PI, PI Expert, SCALE, SCALE-1, SCALE-2, SCALE-3, SCALE-iDriver and SCALE-iFlex are trademarks of Power Integrations, Inc. Other trademarks are property of their respective companies. ©2020, Power Integrations, Inc.