1910 STANDARDS WORKSHOP
STANDARD
1
Procedures to control accumulations of flammable and combustible waste materials
2
An energy control (Lockout/Tagout) procedure.
3
Fixed extinguishing system not being inspected annually.
4
Exit sign must be illuminated to a surface value of at least five foor-candles by a reliable
source and be distinctive in color
5
Eighteen inch vertical clearance beween sprinklers and material below.
6
The employer shall assure that porable fire extinguishers are maintained in a fully charged and
operable condition
7
No eye-wash facility in battery charging area…battery acid being used.
8
Employer did not assess the workplace to determine the need for PPE.
9
Respirators required---no training program for users.
10
Tennis shoes being worn by employees loading concrete blocks on pallets.
11
Acid dip tank operation---no quick drench or flushing capability for body or eyes.
12
No eye protection being worn by employees in metal plating area, exposing them to splashing
chemicals.
13
The distance between any two flammable or combustible liquid storage tanks shall not be less
than 3 feet
14
Electrical equipment must have marking giving voltage, current, wattage, or other ratings as
necessary.
15
End attachments on a wire rope sling are cracked and deformed.
16
Welding operation being done inside paint spray booth.
17
60 gallons of Class I liquid stored in a flammable liquid storage cabinet.
18
Forklift operator giving a ride to two personnel on a standard pallet mounted on forks.
19
The face velocity on a dry-filter spray booth was less than 50 linear feet per minute.
20
Containers used to transfer flammable liquids were not bonded to the dispensing drum.
STANDARD
21
Employee was exposed to 300 ppm---TWA of methyl alcohol.
22
Stairway has six risers and no handrails.
23
Open sided floor---Six foot drop---no guardrails.
24
Fixed ladder---30 feet high with no cage guard.
25
Open-sided work platform (less than 4 feet high) adjacent to dangerous equipment, not
guarded with standard railing and toeboard.
26
Portable dockboard without any securing device to prevent slipping.
27
Compressed gas cylinders in storage with no valve protection caps.
28
Oxygen and fuel-gas cylinders stored with no valve protection caps.
29
The entire length of two parallel oxygen and acetylene hoses is wrapped with tape.
30
Welding electrode cable lead damaged and frayed, exposing bare wire.
31
A loose conduit is feeding into a box.
32
Hazardous chemicals leaving the workplace not properly labeled.
33
Hand-held portable electric grinder with no guard.
34
Hand-held electric circular saw equipped with a lock-on control switch.
35
Hand-held circular saw being used with no lower blade guard.
36
Safety data sheets for each hazardous chemical not readily accessible to employees during
each work shift.
37
Radial arm saw has lower portion of blade unguarded.
38
Bench mounted grinder has 1/2 inch space between wheel and work rest.
39
No guarding provided to protect employees from flying chips of a metal turning lathe.
40
Distance between wheel periphery and adjustable tongue on bench mounted grinder was
3/8 inch.