INSTALLATION RULES BOOKS THIS INFORMATION IS MADE POSSIBLE BY: http://www.installationrulesstudymate.co.za info@installationrulesstudymate.co.za The study material is a no nonsense guide for the Installation Rules course. It focuses on the sections most likely to be on the actual exam. We have created study guides for both Installation Rules Paper1 and Paper II, and have as well developed what we call the ‘exam simulator’ software to facilitate your exam preparation process. The focus is on preparing you for the exams and to shorten your preparation time. The study material offers a self-paced method of preparing yourself for the exams. You will go through all the sections of the regulation book, but the great news is that you do not have to guess which sections of the book you need to focus on. Every Module in the study guide guides you through the regulation book by answering questions similar to the ones you will face in the exam. The study guides consists of worked out calculation examples, a selection of questions and answers similar to the ones you will find on the actual exam. All you need to do is go through the examples and use your latest standards to answer the questions in each module, and finally attempt as many questions as you can that will be generated by the Exam Simulator software. Then, once that is done you will be ready to take the exam. If you work very hard, you can pass both papers with DISTINCTIONS. INSTALLATION RULES PAPER 1 AND PAPER 2 SANS BOOKS AVAILABLE FROM SABS SANS 1507-1 Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V) — Part 1: General SANS 1973-1 SANS 10142-1 Low-voltage switchgear and controlgear ASSEMBLIES — Part 1: Type-tested ASSEMBLIES with stated deviations and a rated short-circuit withstand strength above 10 kA The wiring of premises — Part 1: Low-voltage installations SANS 10198-2 The selection, handling and installation of electric power cables of rating not exceeding SANS 10292 33 kV — Part 2: Selection of cable type and methods of installation Earthing of low-voltage (LV) distribution systems SANS 10313 The protection of structures against lightning SANS 60439-1 SANS 62305-1 Low-voltage switchgear and controlgear assemblies — Part 1: Type-tested and partially type-tested assemblies Protection against lightning — Part 1: General principles SANS 62305-2 Protection against lightning — Part 2: Risk management SANS 62305-3 Protection against lightning — Part 3: Physical damage to structures and life hazard SANS 62305-4 Protection against lightning — Part 4: Electrical and electronic systems within structures OHS ACT EIR AND ELECTRICAL MACHINERY REGULATIONS