ASME Boiler and Pressure Vessel Code An International Code 2015 MATERI ALS Prop er ties (Cu stomar y) This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. SECTION II Pa r t D Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME B PVC.II.D.C -2015 No fu 2015 ASME Boiler & Pressure Vessel Code 2015 Edition July 1, 2015 MATERIALS Part D Properties (Customary) ASME Boiler and Pressure Vessel Committee on Materials Two Park Avenue • New York, NY • 10016 USA This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. II Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). AN INTERNATIONAL CODE No fu This international code or standard was developed under procedures accredited as meeting the criteria for American National Standards and it is an American National Standard. The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large. ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity. ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code or standard. ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals. The endnotes and preamble in this document (if any) are part of this American National Standard. ASME collective membership mark Certification Mark “ASME” is the trademark of The American Society of Mechanical Engineers. No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Library of Congress Catalog Card Number: 56-3934 Printed in the United States of America Adopted by the Council of The American Society of Mechanical Engineers, 1914; latest edition 2015. The American Society of Mechanical Engineers Two Park Avenue, New York, NY 10016-5990 Copyright © 2015 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All rights reserved This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. The above ASME symbol is registered in the U.S. Patent Office. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Date of Issuance: July 1, 2015 No fu List of Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Statement of Policy on the Use of the Certification Mark and Code Authorization in Advertising Statement of Policy on the Use of ASME Marking to Identify Manufactured Items . . . . . . . . . . . . Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees . . . . . Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . List of Changes in Record Number Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code . . . . . . . . . . . . . Subpart 1 .. .. .. .. .. .. .. .. .. . . . . . . . . . .. .. .. .. .. .. .. .. .. . . . . . . . . . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. x xii xiv xiv xv xvii xxxiv xliv xlv 1 1 Subpart 2 Physical Properties Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 752 752 Subpart 3 Charts and Tables for Determining Shell Thickness of Components Under External Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 793 Mandatory Appendix 1 Basis for Establishing Stress Values in Tables 1A and 1B . . . . . . . . . . . . 922 Mandatory Appendix 2 Basis for Establishing Design Stress Intensity Values for Tables 2A, 2B, and 4, and Allowable Stress Values for Table 3 . . . . . . . . . . . . . . . . . . . 924 Mandatory Appendix 3 Basis for Establishing External Pressure Charts . . . . . . . . . . . . . . . . . . . . 927 Mandatory Appendix 5 Guidelines on the Approval of New Materials Under the ASME Boiler and Pressure Vessel Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 934 Mandatory Appendix 7 Guidelines on Multiple Marking of Materials . . . . . . . . . . . . . . . . . . . . . . . 942 Mandatory Appendix 9 Standard Units for Use in Equations .............................. 944 Mandatory Appendix 10 Basis for Establishing Maximum Allowable Stress Values for Tables 5A and 5B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 945 Nonmandatory Appendix A Issues Associated With Materials Used in ASME Code Construction . . . 947 Nonmandatory Appendix B Developing Nominal Composition Designations for ASME Code Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 967 Guidance for the Use of U.S. Customary and SI Units in the ASME Boiler and Pressure Vessel Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 970 Guidelines for Rounding Minimum Specified Tensile and Yield Strength Values and for Establishing Anchor Points for Tensile and Yield Strength Trend Curves in Tables 1A, 1B, 2A, 2B, 3, 4, 5A, 5B, U, U-2, and Y-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 973 Nonmandatory Appendix C Nonmandatory Appendix D iii 2 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Stress Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Statement of Policy on Information Provided in the Stress Tables . . . . . . . . Guideline on Locating Materials in Stress Tables, and in Tables of Mechanical and Physical Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). TABLE OF CONTENTS No fu CS-2 CS-3 CS-4 CS-5 CS-6 HT-1 HT-2 HA-1 HA-2 HA-3 HA-4 HA-6 HA-7 HA-8 HA-9 CI-1 CD-1 CD-2 NFA-1 NFA-2 NFA-3 NFA-4 iv 794 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. HA-5 Geometric Chart for Components Under External or Compressive Loadings (for All Materials) . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Carbon or Low Alloy Steels With Specified Minimum Yield Strength Less Than 30,000 psi . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Carbon or Low Alloy Steels With Specified Minimum Yield Strength 30,000 psi and Higher . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Carbon Steel and Low Alloy Steels With Specified Minimum Yield Strength 38,000 psi and Higher for Temperatures 300°F and Less . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for SA-537 Thickness 21/2 in. and Less . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for SA-508 Class 1, Grades 2 and 3; SA-508 Class 2, Grade 2; SA-533 Class 1, Grades A, B, C, and D; SA-533 Class 2, Grades A, B, C, and D; or SA-541 Grades 2 and 3 . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Carbon Steel With Specified Minimum Yield Strength of 20,000 psi . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Quenched and Tempered Low Alloy Steel With Specified Minimum Yield Strength of 100,000 psi and Thickness 21/2 in. and Less . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for SA-508 Grade 4N, Class 2 or SA-543 Types B and C, Class 2 With Specified Minimum Yield Strength of 100,000 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Austenitic Steel 18Cr–8Ni, Type 304 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Austenitic Steel 16Cr–12Ni–2Mo, Type 316 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Austenitic Steel 18Cr–8Ni–0.035 Maximum Carbon, Type 304L . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Austenitic Steel 18Cr–8Ni–Mo–0.035 Maximum Carbon, Type 316L . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Austenitic–Ferritic Steel 18Cr–5Ni–3Mo S31500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Austenitic Steel 21Cr–11Ni–N S30815 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for SA-564 Type 630 H1150 (17Cr–4Ni–4Cu S17400) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Austenitic–Ferritic Steel 25Cr–7Ni–3Mo–2W–0.28N S39274 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Austenitic Steel 25Cr–7.5Ni–3.5Mo–N–Cu–W S32760 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Cast Ductile Iron With a Specified Minimum Yield Strength of 40,000 psi . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Cast Ductile Iron With a Specified Minimum Yield Strength of 29,000 psi . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Aluminum Alloy 3003 in 0 Temper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Aluminum Alloy 3003 in H14 Temper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Aluminum Alloy 3004 in 0 Temper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Aluminum Alloy 3004 in H34 Temper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). FIGURES G CS-1 No fu NFA-6 NFA-7 NFA-8 NFA-9 NFA-10 NFA-11 NFA-12 NFA-13 NFC-1 NFC-2 NFC-3 NFC-4 NFC-5 NFC-6 NFC-8 NFN-1 NFN-2 NFN-3 NFN-4 NFN-5 NFN-6 NFN-7 NFN-8 NFN-9 NFN-10 v 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. NFC-7 Chart for Determining Shell Thickness of Components Under External Pressure Developed for Aluminum Alloy 5154 in 0 Temper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Aluminum Alloy 5454 in 0 Temper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Aluminum Alloy 1060 in 0 Temper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Aluminum Alloy 5052 in 0 Temper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Aluminum Alloy 5086 in 0 Temper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Aluminum Alloy 5456 in 0 Temper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Aluminum Alloy 5083 in 0 Temper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Welded Aluminum Alloy 6061‐T6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Welded Aluminum Alloy 6061‐T4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Annealed Copper, Type DHP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Copper–Silicon Alloys A and C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Annealed 90–10 Copper–Nickel Alloy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Annealed 70–30 Copper–Nickel Alloy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Welded Copper–Iron Alloy Tube C19400 (SB-543 Welded) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for SB-75 and SB-111 Light Drawn Seamless Copper Tubes, Alloys C10200, C12000, C12200, and C14200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Annealed Copper, SB-75, UNS C12200, Temper 050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Aluminum Bronze Alloy C61400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Annealed Low Carbon Nickel N02201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Annealed Nickel N02200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Annealed Nickel–Copper Alloy N04400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Annealed Nickel–Chromium–Iron Alloy N06600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Nickel–Molybdenum Alloy N10001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Nickel–Molybdenum–Chromium–Iron Alloy N10003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Nickel–Iron–Chromium–Molybdenum–Copper Alloy N08825 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Annealed Nickel–Iron–Chromium Alloy N08800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Annealed Nickel–Iron–Chromium Alloy N08810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Low Carbon Nickel–Molybdenum–Chromium Alloy N10276 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). NFA-5 No fu NFN-12 NFN-13 NFN-14 NFN-15 NFN-16 NFN-17 NFN-18 NFN-19 NFN-20 NFN-21 NFN-22 NFN-23 NFN-24 NFN-26 NFN-27 NFT-1 NFT-2 NFT-3 NFT-4 NFT-5 NFZ-1 NFZ-2 3-500.1 3-500.2 vi 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 929 930 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. NFN-25 Chart for Determining Shell Thickness of Components Under External Pressure Developed for Solution Treated Nickel–Chromium–Iron–Molybdenum–Copper Alloy N06007 . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Chromium–Nickel–Iron–Molybdenum–Copper–Columbium Alloy N08020 . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Nickel–Iron–Chromium–Silicon Alloy N08330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Nickel–Chromium–Molybdenum Alloy N06455 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Nickel–Molybdenum Alloy N06002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Nickel–Molybdenum Alloy N10665 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Annealed Nickel–Chromium–Molybdenum–Columbium Alloy N06625 (SB-443, SB-444, and SB-446) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Nickel–Molybdenum–Chromium–Iron–Copper Alloy N06985 Having a Minimum Yield Strength of 35 ksi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Nickel–Molybdenum–Chromium–Iron–Copper Alloy N06985 Having a Minimum Yield Strength of 30 ksi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Work‐Hardened Nickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Nickel–Chromium–Iron Alloy N06600 (Specified Minimum Yield Strength 40,000 psi) . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Solution Annealed Ni–Cr–Mo–Cb Alloy, Grade 2 N06625 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Cold Worked Nickel–Iron–Chromium Alloy N08800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Nickel Alloy N06230 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Stress Relieved Nickel Alloy N02200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Alloy S31277 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Alloy N06035 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Unalloyed Titanium Grade 3 (UNS R50550) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Unalloyed Titanium Grade 2 (UNS R50400) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Titanium Grade 1 (UNS R50250) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Titanium Grade 9 Alloy (UNS R56320) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Titanium Grade 12 Alloy (UNS R53400) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Zirconium Alloy (UNS R60702) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chart for Determining Shell Thickness of Components Under External Pressure Developed for Zirconium Alloy (UNS R60705) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Temperature Limits for Application of Section II External Pressure Charts for Cylinder Under External Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Temperature Limits for Application of Section II External Pressure Charts for Cylinder Under Axial Compression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). NFN-11 No fu 3-700.1 TABLES 1A 1B 2A 2B 3 4 5A 5B U U-2 Y-1 Y-2 Section I; Section III, Classes 2 and 3; Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section I; Section III, Classes 2 and 3; Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section III, Division 1, Classes 1 and MC, and Section III, Division 3, Classes TC and SC Design Stress Intensity Values S m for Ferrous Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section III, Division 1, Class 1 and Section III, Division 3, Classes TC and SC Design Stress Intensity Values S m for Nonferrous Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section III, Classes 2 and 3; Section VIII, Divisions 1 and 2; and Section XII Maximum Allowable Stress Values S for Bolting Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section III, Classes 1, TC, and SC; and Section VIII, Division 2 Design Stress Intensity Values S m for Bolting Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section VIII, Division 2 Maximum Allowable Stress Values S for Ferrous Materials . . . . . . . . . . Section VIII, Division 2 Maximum Allowable Stress Values S for Nonferrous Materials . . . . . . . Tensile Strength Values S u for Ferrous and Nonferrous Materials . . . . . . . . . . . . . . . . . . . . . . . . . Section VIII, Division 3 Tensile Strength Values S u for Ferrous Materials . . . . . . . . . . . . . . . . . . . Yield Strength Values S y for Ferrous and Nonferrous Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . Factors for Limiting Permanent Strain in Austenitic Stainless Steels, High-Nickel Alloy Steels, Nickel, and Nickel Alloys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thermal Expansion for Ferrous Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thermal Expansion for Aluminum Alloys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thermal Expansion for Copper Alloys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thermal Expansion for Nickel Alloys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thermal Expansion for Titanium Alloys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nominal Coefficients of Thermal Conductivity (TC) and Thermal Diffusivity (TD) . . . . . . . . . . . . Moduli of Elasticity E of Ferrous Materials for Given Temperatures . . . . . . . . . . . . . . . . . . . . . . . Moduli of Elasticity E of Aluminum and Aluminum Alloys for Given Temperatures . . . . . . . . . . Moduli of Elasticity E of Copper and Copper Alloys for Given Temperatures . . . . . . . . . . . . . . . . Moduli of Elasticity E of High Nickel Alloys for Given Temperatures . . . . . . . . . . . . . . . . . . . . . . Moduli of Elasticity E of Titanium and Zirconium for Given Temperatures . . . . . . . . . . . . . . . . . Poisson’s Ratio and Density of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure CS-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure CS-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure CS-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure CS-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure CS-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure CS-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure HT-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure HT-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure HA-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure HA-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure HA-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure HA-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure HA-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure HA-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure HA-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure HA-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure HA-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure CI-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure CD-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii 931 932 6 154 278 336 344 374 386 448 474 560 562 751 753 758 759 760 770 771 785 788 789 790 791 791 871 873 874 875 876 876 877 877 878 878 879 879 880 880 881 882 882 883 884 884 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. TE-1 TE-2 TE-3 TE-4 TE-5 TCD TM-1 TM-2 TM-3 TM-4 TM-5 PRD G CS-1 CS-2 CS-3 CS-4 CS-5 CS-6 HT-1 HT-2 HA-1 HA-2 HA-3 HA-4 HA-5 HA-6 HA-7 HA-8 HA-9 CI-1 CD-1 Temperature Limits for Application of Section II External Pressure Charts for Sphere Under External Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Normalization of Test σ– ε to σ y m i n and E c o d e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). 3-500.3 No fu viii .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 884 885 886 887 888 888 889 889 890 890 891 891 892 893 893 894 894 895 895 896 896 897 897 898 898 899 899 900 900 901 902 903 903 904 904 905 906 907 908 909 910 911 912 913 914 915 915 916 917 918 918 919 920 921 921 923 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Tabular Values for Figure CD-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFA-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFA-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFA-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFA-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFA-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFA-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFA-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFA-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFA-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFA-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFA-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFA-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFA-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFC-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFC-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFC-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFC-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFC-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFC-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFC-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFC-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFN-27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFT-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFT-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFT-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFT-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFT-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFZ-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tabular Values for Figure NFZ-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Criteria for Establishing Allowable Stress Values for Tables 1A and 1B Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). CD-2 NFA-1 NFA-2 NFA-3 NFA-4 NFA-5 NFA-6 NFA-7 NFA-8 NFA-9 NFA-10 NFA-11 NFA-12 NFA-13 NFC-1 NFC-2 NFC-3 NFC-4 NFC-5 NFC-6 NFC-7 NFC-8 NFN-1 NFN-2 NFN-3 NFN-4 NFN-5 NFN-6 NFN-7 NFN-8 NFN-9 NFN-10 NFN-11 NFN-12 NFN-13 NFN-14 NFN-15 NFN-16 NFN-17 NFN-18 NFN-19 NFN-20 NFN-22 NFN-23 NFN-24 NFN-25 NFN-26 NFN-27 NFT-1 NFT-2 NFT-3 NFT-4 NFT-5 NFZ-1 NFZ-2 1-100 No fu 9-100 10-100 ENDNOTES Criteria for Establishing Design Stress Intensity Values for Tables 2A and 2B . . . . . . . . . . . . . . Criteria for Establishing Allowable Stress Values for Table 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Criteria for Establishing Allowable Stress or Design Stress Intensity Values for Table 4 . . . . . ASTM Test Methods and Units for Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Example of a Comparison of Allowable Stresses of Base Metals With Compositions Similar to Those of Selected Welding Consumables and the Proposed New Base Metal . . . . . . . . . . . . . Standard Units for Use in Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Criteria for Establishing Allowable Stress Values for Tables 5A and 5B . . . . . . . . . . . . . . . . . . . . . . . 925 926 926 937 . . . 940 944 945 ................................................................................. 975 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. ix Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). 2-100(a) 2-100(b) 2-100(c) 5-800 5-1500 No fu SECTIONS I Rules for Construction of Power Boilers Materials • Part A — Ferrous Material Specifications • Part B — Nonferrous Material Specifications • Part C — Specifications for Welding Rods, Electrodes, and Filler Metals • Part D — Properties (Customary) • Part D — Properties (Metric) III Rules for Construction of Nuclear Facility Components • Subsection NCA — General Requirements for Division 1 and Division 2 • Appendices • Division 1 – Subsection NB — Class 1 Components – Subsection NC — Class 2 Components – Subsection ND — Class 3 Components – Subsection NE — Class MC Components – Subsection NF — Supports – Subsection NG — Core Support Structures – Subsection NH — Class 1 Components in Elevated Temperature Service* • Division 2 — Code for Concrete Containments • Division 3 — Containments for Transportation and Storage of Spent Nuclear Fuel and High Level Radioactive Material and Waste • Division 5 — High Temperature Reactors IV Rules for Construction of Heating Boilers V Nondestructive Examination VI Recommended Rules for the Care and Operation of Heating Boilers VII Recommended Guidelines for the Care of Power Boilers VIII Rules for Construction of Pressure Vessels • Division 1 • Division 2 — Alternative Rules • Division 3 — Alternative Rules for Construction of High Pressure Vessels IX Welding, Brazing, and Fusing Qualifications X Fiber-Reinforced Plastic Pressure Vessels XI Rules for Inservice Inspection of Nuclear Power Plant Components XII Rules for Construction and Continued Service of Transport Tanks * The 2015 Edition of Section III is the last edition in which Section III, Division 1, Subsection NH, Class 1 Components in Elevated Temperature Service, will be published. The requirements located within Subsection NH have been moved to Section III, Division 5, Subsection HB, Subpart B for the elevated temperature construction of Class A components. x This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. II Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). LIST OF SECTIONS ð15Þ No fu Interpretations of the Code have historically been posted in January and July at http://cstools.asme.org/interpretations.cfm. Interpretations issued during the previous two calendar years are included with the publication of the applicable Section of the Code in the 2015 Edition. Interpretations of Section III, Divisions 1 and 2 and Section III Appendices are included with Subsection NCA. Following the 2015 Edition, interpretations will not be included in editions; they will be issued in real time in ASME's Interpretations Database at http://go.asme.org/Interpretations. Historical BPVC interpretations may also be found in the Database. CODE CASES The Boiler and Pressure Vessel Code committees meet regularly to consider proposed additions and revisions to the Code and to formulate Cases to clarify the intent of existing requirements or provide, when the need is urgent, rules for materials or constructions not covered by existing Code rules. Those Cases that have been adopted will appear in the appropriate 2015 Code Cases book: “Boilers and Pressure Vessels” or “Nuclear Components.” Supplements will be sent or made available automatically to the purchasers of the Code Cases books up to the publication of the 2017 Code. This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. xi Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). INTERPRETATIONS No fu * The information contained in this Foreword is not part of this American National Standard (ANS) and has not been processed in accordance with ANSI's requirements for an ANS. Therefore, this Foreword may contain material that has not been subjected to public review or a consensus process. In addition, it does not contain requirements necessary for conformance to the Code. ** Construction, as used in this Foreword, is an all-inclusive term comprising materials, design, fabrication, examination, inspection, testing, certification, and pressure relief. xii This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. In 1911, The American Society of Mechanical Engineers established the Boiler and Pressure Vessel Committee to formulate standard rules for the construction of steam boilers and other pressure vessels. In 2009, the Boiler and Pressure Vessel Committee was superseded by the following committees: (a) Committee on Power Boilers (I) (b) Committee on Materials (II) (c) Committee on Construction of Nuclear Facility Components (III) (d) Committee on Heating Boilers (IV) (e) Committee on Nondestructive Examination (V) (f) Committee on Pressure Vessels (VIII) (g) Committee on Welding, Brazing, and Fusing (IX) (h) Committee on Fiber-Reinforced Plastic Pressure Vessels (X) (i) Committee on Nuclear Inservice Inspection (XI) (j) Committee on Transport Tanks (XII) (k) Technical Oversight Management Committee (TOMC) Where reference is made to “the Committee” in this Foreword, each of these committees is included individually and collectively. The Committee’s function is to establish rules of safety relating only to pressure integrity, which govern the construction** of boilers, pressure vessels, transport tanks, and nuclear components, and the inservice inspection of nuclear components and transport tanks. The Committee also interprets these rules when questions arise regarding their intent. The technical consistency of the Sections of the Code and coordination of standards development activities of the Committees is supported and guided by the Technical Oversight Management Committee. This Code does not address other safety issues relating to the construction of boilers, pressure vessels, transport tanks, or nuclear components, or the inservice inspection of nuclear components or transport tanks. Users of the Code should refer to the pertinent codes, standards, laws, regulations, or other relevant documents for safety issues other than those relating to pressure integrity. Except for Sections XI and XII, and with a few other exceptions, the rules do not, of practical necessity, reflect the likelihood and consequences of deterioration in service related to specific service fluids or external operating environments. In formulating the rules, the Committee considers the needs of users, manufacturers, and inspectors of pressure vessels. The objective of the rules is to afford reasonably certain protection of life and property, and to provide a margin for deterioration in service to give a reasonably long, safe period of usefulness. Advancements in design and materials and evidence of experience have been recognized. This Code contains mandatory requirements, specific prohibitions, and nonmandatory guidance for construction activities and inservice inspection and testing activities. The Code does not address all aspects of these activities and those aspects that are not specifically addressed should not be considered prohibited. The Code is not a handbook and cannot replace education, experience, and the use of engineering judgment. The phrase engineering judgement refers to technical judgments made by knowledgeable engineers experienced in the application of the Code. Engineering judgments must be consistent with Code philosophy, and such judgments must never be used to overrule mandatory requirements or specific prohibitions of the Code. The Committee recognizes that tools and techniques used for design and analysis change as technology progresses and expects engineers to use good judgment in the application of these tools. The designer is responsible for complying with Code rules and demonstrating compliance with Code equations when such equations are mandatory. The Code neither requires nor prohibits the use of computers for the design or analysis of components constructed to the Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). FOREWORD* ð15Þ No fu This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. xiii Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). requirements of the Code. However, designers and engineers using computer programs for design or analysis are cautioned that they are responsible for all technical assumptions inherent in the programs they use and the application of these programs to their design. The rules established by the Committee are not to be interpreted as approving, recommending, or endorsing any proprietary or specific design, or as limiting in any way the manufacturer's freedom to choose any method of design or any form of construction that conforms to the Code rules. The Committee meets regularly to consider revisions of the rules, new rules as dictated by technological development, Code Cases, and requests for interpretations. Only the Committee has the authority to provide official interpretations of this Code. Requests for revisions, new rules, Code Cases, or interpretations shall be addressed to the Secretary in writing and shall give full particulars in order to receive consideration and action (see Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees). Proposed revisions to the Code resulting from inquiries will be presented to the Committee for appropriate action. The action of the Committee becomes effective only after confirmation by ballot of the Committee and approval by ASME. Proposed revisions to the Code approved by the Committee are submitted to the American National Standards Institute (ANSI) and published at http://go.asme.org/BPVCPublicReview to invite comments from all interested persons. After public review and final approval by ASME, revisions are published at regular intervals in Editions of the Code. The Committee does not rule on whether a component shall or shall not be constructed to the provisions of the Code. The scope of each Section has been established to identify the components and parameters considered by the Committee in formulating the Code rules. Questions or issues regarding compliance of a specific component with the Code rules are to be directed to the ASME Certificate Holder (Manufacturer). Inquiries concerning the interpretation of the Code are to be directed to the Committee. ASME is to be notified should questions arise concerning improper use of an ASME Certification Mark. When required by context in this Section, the singular shall be interpreted as the plural, and vice versa, and the feminine, masculine, or neuter gender shall be treated as such other gender as appropriate. No fu ASME has established procedures to authorize qualified organizations to perform various activities in accordance with the requirements of the ASME Boiler and Pressure Vessel Code. It is the aim of the Society to provide recognition of organizations so authorized. An organization holding authorization to perform various activities in accordance with the requirements of the Code may state this capability in its advertising literature. Organizations that are authorized to use the Certification Mark for marking items or constructions that have been constructed and inspected in compliance with the ASME Boiler and Pressure Vessel Code are issued Certificates of Authorization. It is the aim of the Society to maintain the standing of the Certification Mark for the benefit of the users, the enforcement jurisdictions, and the holders of the Certification Mark who comply with all requirements. Based on these objectives, the following policy has been established on the usage in advertising of facsimiles of the Certification Mark, Certificates of Authorization, and reference to Code construction. The American Society of Mechanical Engineers does not “approve,” “certify,” “rate,” or “endorse” any item, construction, or activity and there shall be no statements or implications that might so indicate. An organization holding the Certification Mark and/or a Certificate of Authorization may state in advertising literature that items, constructions, or activities “are built (produced or performed) or activities conducted in accordance with the requirements of the ASME Boiler and Pressure Vessel Code,” or “meet the requirements of the ASME Boiler and Pressure Vessel Code.” An ASME corporate logo shall not be used by any organization other than ASME. The Certification Mark shall be used only for stamping and nameplates as specifically provided in the Code. However, facsimiles may be used for the purpose of fostering the use of such construction. Such usage may be by an association or a society, or by a holder of the Certification Mark who may also use the facsimile in advertising to show that clearly specified items will carry the Certification Mark. General usage is permitted only when all of a manufacturer’s items are constructed under the rules. The ASME Boiler and Pressure Vessel Code provides rules for the construction of boilers, pressure vessels, and nuclear components. This includes requirements for materials, design, fabrication, examination, inspection, and stamping. Items constructed in accordance with all of the applicable rules of the Code are identified with the official Certification Mark described in the governing Section of the Code. Markings such as “ASME,” “ASME Standard,” or any other marking including “ASME” or the Certification Mark shall not be used on any item that is not constructed in accordance with all of the applicable requirements of the Code. Items shall not be described on ASME Data Report Forms nor on similar forms referring to ASME that tend to imply that all Code requirements have been met when, in fact, they have not been. Data Report Forms covering items not fully complying with ASME requirements should not refer to ASME or they should clearly identify all exceptions to the ASME requirements. xiv This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. STATEMENT OF POLICY ON THE USE OF ASME MARKING TO IDENTIFY MANUFACTURED ITEMS Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). STATEMENT OF POLICY ON THE USE OF THE CERTIFICATION MARK AND CODE AUTHORIZATION IN ADVERTISING No fu 1 INTRODUCTION (a) The following information provides guidance to Code users for submitting technical inquiries to the committees. See Guideline on the Approval of New Materials Under the ASME Boiler and Pressure Vessel Code in Section II, Parts C and D for additional requirements for requests involving adding new materials to the Code. Technical inquiries include requests for revisions or additions to the Code rules, requests for Code Cases, and requests for Code Interpretations, as described below. (1) Code Revisions. Code revisions are considered to accommodate technological developments, address administrative requirements, incorporate Code Cases, or to clarify Code intent. (2) Code Cases. Code Cases represent alternatives or additions to existing Code rules. Code Cases are written as a question and reply, and are usually intended to be incorporated into the Code at a later date. When used, Code Cases prescribe mandatory requirements in the same sense as the text of the Code. However, users are cautioned that not all jurisdictions or owners automatically accept Code Cases. The most common applications for Code Cases are: (-a) to permit early implementation of an approved Code revision based on an urgent need (-b) to permit the use of a new material for Code construction (-c) to gain experience with new materials or alternative rules prior to incorporation directly into the Code (3) Code Interpretations. Code Interpretations provide clarification of the meaning of existing rules in the Code, and are also presented in question and reply format. Interpretations do not introduce new requirements. In cases where existing Code text does not fully convey the meaning that was intended, and revision of the rules is required to support an interpretation, an Intent Interpretation will be issued and the Code will be revised. (c) Inquiries that do not comply with these provisions or that do not provide sufficient information for a committee’s full understanding may result in the request being returned to the inquirer with no action. 2 INQUIRY FORMAT Submittals to a committee shall include: (a) Purpose. Specify one of the following: (1) revision of present Code rules (2) new or additional Code rules (3) Code Case (4) Code Interpretation (b) Background. Provide the information needed for the committee’s understanding of the inquiry, being sure to include reference to the applicable Code Section, Division, edition, addenda (if applicable), paragraphs, figures, and tables. Preferably, provide a copy of the specific referenced portions of the Code. (c) Presentations. The inquirer may desire or be asked to attend a meeting of the committee to make a formal presentation or to answer questions from the committee members with regard to the inquiry. Attendance at a committee meeting shall be at the expense of the inquirer. The inquirer’s attendance or lack of attendance at a meeting shall not be a basis for acceptance or rejection of the inquiry by the committee. xv This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. (b) The Code rules, Code Cases, and Code Interpretations established by the committees are not to be considered as approving, recommending, certifying, or endorsing any proprietary or specific design, or as limiting in any way the freedom of manufacturers, constructors, or owners to choose any method of design or any form of construction that conforms to the Code rules. ð15Þ Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). SUBMITTAL OF TECHNICAL INQUIRIES TO THE BOILER AND PRESSURE VESSEL STANDARDS COMMITTEES No fu CODE REVISIONS OR ADDITIONS Requests for Code revisions or additions shall provide the following: (a) Proposed Revisions or Additions. For revisions, identify the rules of the Code that require revision and submit a copy of the appropriate rules as they appear in the Code, marked up with the proposed revision. For additions, provide the recommended wording referenced to the existing Code rules. (b) Statement of Need. Provide a brief explanation of the need for the revision or addition. (c) Background Information. Provide background information to support the revision or addition, including any data or changes in technology that form the basis for the request that will allow the committee to adequately evaluate the proposed revision or addition. Sketches, tables, figures, and graphs should be submitted as appropriate. When applicable, identify any pertinent paragraph in the Code that would be affected by the revision or addition and identify paragraphs in the Code that reference the paragraphs that are to be revised or added. 4 CODE CASES Requests for Code Cases shall provide a Statement of Need and Background Information similar to that defined in 3(b) and 3(c), respectively, for Code revisions or additions. The urgency of the Code Case (e.g., project underway or imminent, new procedure, etc.) must be defined and it must be confirmed that the request is in connection with equipment that will bear the Certification Mark, with the exception of Section XI applications. The proposed Code Case should identify the Code Section and Division, and be written as a Question and a Reply in the same format as existing Code Cases. Requests for Code Cases should also indicate the applicable Code editions and addenda (if applicable) to which the proposed Code Case applies. 5 CODE INTERPRETATIONS 6 SUBMITTALS Submittals to and responses from the committees shall meet the following: (a) Submittal. Inquiries from Code users shall be in English and preferably be submitted in typewritten form; however, legible handwritten inquiries will also be considered. They shall include the name, address, telephone number, fax number, and e-mail address, if available, of the inquirer and be mailed to the following address: Secretary ASME Boiler and Pressure Vessel Committee Two Park Avenue New York, NY 10016-5990 As an alternative, inquiries may be submitted via e-mail to: SecretaryBPV@asme.org or via our online tool at http:// go.asme.org/InterpretationRequest. (b) Response. The Secretary of the appropriate committee shall acknowledge receipt of each properly prepared inquiry and shall provide a written response to the inquirer upon completion of the requested action by the committee. xvi This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. (a) Requests for Code Interpretations shall provide the following: (1) Inquiry. Provide a condensed and precise question, omitting superfluous background information and, when possible, composed in such a way that a “yes” or a “no” Reply, with brief provisos if needed, is acceptable. The question should be technically and editorially correct. (2) Reply. Provide a proposed Reply that will clearly and concisely answer the Inquiry question. Preferably, the Reply should be “yes” or “no,” with brief provisos if needed. (3) Background Information. Provide any background information that will assist the committee in understanding the proposed Inquiry and Reply. (b) Requests for Code Interpretations must be limited to an interpretation of a particular requirement in the Code or a Code Case. The committee cannot consider consulting type requests such as the following: (1) a review of calculations, design drawings, welding qualifications, or descriptions of equipment or parts to determine compliance with Code requirements; (2) a request for assistance in performing any Code-prescribed functions relating to, but not limited to, material selection, designs, calculations, fabrication, inspection, pressure testing, or installation; (3) a request seeking the rationale for Code requirements. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). 3 No fu PERSONNEL ASME Boiler and Pressure Vessel Standards Committees, Subgroups, and Working Groups January 1, 2015 MARINE CONFERENCE GROUP TECHNICAL OVERSIGHT MANAGEMENT COMMITTEE (TOMC) T. P. Pastor, Chair R. W. Barnes, Vice Chair J. S. Brzuszkiewicz, Staff Secretary R. J. Basile J. E. Batey T. L. Bedeaux D. L. Berger D. A. Canonico A. Chaudouet D. B. DeMichael R. P. Deubler P. D. Edwards J. G. Feldstein R. E. Gimple M. Gold T. E. Hansen G. W. Hembree J. G. Hungerbuhler, Jr. G. Nair J. F. Henry R. S. Hill III G. G. Karcher W. M. Lundy J. R. MacKay W. E. Norris G. C. Park M. D. Rana R. F. Reedy, Sr. B. W. Roberts S. C. Roberts F. J. Schaaf, Jr. A. Selz B. F. Shelley W. J. Sperko R. W. Swayne C. Withers CONFERENCE COMMITTEE A. J. Justin W. G. Knecht J. LeCoff T. G. McCarty G. C. Millman R. A. Moen R. F. Reedy, Sr. D. E. Mallory — New Hampshire W. McGivney — New York U. Merkle — Iowa M. S. Moore — Michigan S. V. Nelson — Colorado C. C. Novak — Illinois T. Oda — Washington R. P. Pate — Alabama M. K. Perdue — Oregon M. Poehlmann — Alberta, Canada J. F. Porcella — West Virginia A. Pratt — Connecticut C. F. Reyes — California M. J. Ryan — Illinois M. H. Sansone — New York T. S. Scholl — British Columbia, Canada G. L. Schultz — Nevada T. S. Seine — North Dakota C. S. Selinger — Saskatchewan, Canada D. Slater — Manitoba, Canada N. Smith — Pennsylvania R. Spiker — North Carolina R. K. Sturm — Utah S. R. Townsend — Prince Edward Island, Canada R. D. Troutt — Texas M. J. Verhagen — Wisconsin M. Washington — New Jersey K. L. Watson — Mississippi C. J. Wilson III — Kansas ADMINISTRATIVE COMMITTEE T. P. Pastor, Chair R. W. Barnes, Vice Chair J. S. Brzuszkiewicz, Staff Secretary R. J. Basile J. E. Batey T. L. Bedeaux D. L. Berger J. F. Henry INTERNATIONAL INTEREST REVIEW GROUP R. S. Hill III V. Felix Y.-G. Kim S. H. Leong W. Lin O. F. Manafa G. C. Park M. D. Rana B. F. Shelley W. J. Sperko xvii C. Minu T. S. G. Narayannen Y.-W. Park R. Reynaga P. Williamson This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. D. A. Douin — Ohio, Secretary M. J. Adams — Ontario, Canada J. T. Amato — Minnesota B. P. Anthony — Rhode Island R. D. Austin — Arizona R. J. Brockman — Missouri M. A. Burns — Florida J. H. Burpee — Maine C. B. Cantrell — Nebraska D. C. Cook — California B. J. Crawford — Georgia E. L. Creaser — New Brunswick, Canada J. J. Dacanay — Hawaii C. Dautrich — North Dakota P. L. Dodge — Nova Scotia, Canada D. Eastman — Newfoundland and Labrador, Canada J. J. Esch — Delaware C. Fulton — Alaska R. J. Handy — Kentucky D. R. Hannon — Arkansas E. S. Kawa — Massachusetts J. C. Klug — Wisconsin M. Kotb — Quebec, Canada T. C. Hellman — Oklahoma E. G. Hilton — Virginia D. T. Jagger — Ohio K. J. Kraft — Maryland L. C. Leet — Washington A. M. Lorimor — South Dakota M. Mailman — Northwest Territories, Canada HONORARY MEMBERS (MAIN COMMITTEE) F. P. Barton R. J. Cepluch T. M. Cullen W. D. Doty G. E. Feigel O. F. Hedden M. H. Jawad N. Prokopuk J. D. Reynolds Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ð15Þ No fu Subgroup on Locomotive Boilers (BPV I) L. Moedinger P. A. Molvie Y. Oishi E. M. Ortman J. T. Pillow B. W. Roberts J. M. Tanzosh D. Tompkins D. E. Tuttle J. Vattappilly R. V. Wielgoszinski Y. Li, Delegate H. Michael, Delegate D. N. French, Honorary Member T. C. McGough, Honorary Member R. L. Williams, Honorary Member L. Moedinger, Chair S. M. Butler, Secretary P. Boschan J. Braun R. C. Franzen, Jr. D. W. Griner S. D. Jackson M. A. Janssen Subgroup on Materials (BPV I) G. W. Galanes, Chair K. K. Coleman, Vice Chair J. S. Hunter, Secretary S. H. Bowes D. A. Canonico P. Fallouey K. L. Hayes J. F. Henry Subgroup on Design (BPV I) J. Vattappilly, Chair D. I. Anderson, Secretary D. Dewees P. Dhorajia H. A. Fonzi, Jr. J. P. Glaspie G. B. Komora S. A. Lee G. M. Ray J. E. Rimmasch R. B. Stone M. W. Westland R. Yuill R. D. Reetz, Contributing Member P. A. Molvie D. A. Olson S. V. Torkildson M. Lewis O. X. Li F. Masuyama D. W. Rahoi B. W. Roberts J. M. Tanzosh J. Vattappilly M. Wadkinson C. F. Jeerings, Contributing Member J. C. Light, Contributing Member Subgroup on Solar Boilers (BPV I) Subgroup on Fabrication and Examination (BPV I) J. Hainsworth T. E. Hansen C. T. McDaris R. E. McLaughlin R. J. Newell Y. Oishi R. V. Wielgoszinski D. J. Koza F. Massi E. M. Ortman M. J. Slater J. C. Light, Contributing Member India International Working Group (BPV I) H. Dalal I. Kalyanasundaram S. Mathur A. J. Patil A. R. Patil G. V. S. Rao Subgroup on General Requirements and Piping (BPV I) T. E. Hansen, Chair E. M. Ortman, Vice Chair F. Massi, Secretary P. Becker D. L. Berger P. D. Edwards G. W. Galanes W. L. Lowry R. E. McLaughlin B. Mollitor J. T. Pillow D. Tompkins S. V. Torkildson D. E. Tuttle M. Wadkinson R. V. Wielgoszinski C. F. Jeerings, Contributing Member R. Uebel, Contributing Member U. Revisanakaran N. Satheesan G. U. Shanker D. Shrivastava S. Venkataramana Task Group on Modernization of BPVC Section I D. I. Anderson, Chair U. D’Urso, Staff Secretary J. L. Arnold S. W. Cameron D. Dewees G. W. Galanes J. P. Glaspie T. E. Hansen Subgroup on Heat Recovery Steam Generators (BPV I) S. V. Torkildson, Chair J. L. Arnold J. P. Bell B. G. Carson J. Gertz T. E. Hansen G. B. Komora C. T. McDaris Y. Oishi E. M. Ortman D. Tompkins B. C. Turczynski xviii J. F. Henry R. E. McLaughlin P. A. Molvie E. M. Ortman J. T. Pillow B. W. Roberts D. E. Tuttle J. Vattappilly This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. J. T. Pillow, Chair J. L. Arnold, Secretary P. Becker D. L. Berger S. W. Cameron S. Fincher G. W. Galanes P. F. Gilston J. S. Hunter, Chair S. V. Torkildson, Secretary G. W. Galanes R. E. Hearne P. Jennings Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). COMMITTEE ON POWER BOILERS (BPV I) D. L. Berger, Chair R. E. McLaughlin, Vice Chair U. D'Urso, Staff Secretary J. L. Arnold S. W. Cameron D. A. Canonico K. K. Coleman P. D. Edwards P. Fallouey J. G. Feldstein G. W. Galanes T. E. Hansen J. F. Henry J. S. Hunter W. L. Lowry F. Massi No fu Subgroup on International Material Specifications (BPV II) E. Shapiro M. J. Slater R. C. Sutherlin R. W. Swindeman J. M. Tanzosh D. Tyler O. Oldani, Delegate H. D. Bushfield, Contributing Member M. L. Nayyar, Contributing Member E. G. Nisbett, Contributing Member E. Upitis, Contributing Member T. M. Cullen, Honorary Member W. D. Doty, Honorary Member W. D. Edsall, Honorary Member G. C. Hsu, Honorary Member R. A. Moen, Honorary Member C. E. Spaeder, Jr., Honorary Member A. W. Zeuthen, Honorary Member A. Chaudouet, Chair O. X. Li, Vice Chair T. F. Miskell, Secretary S. W. Cameron D. A. Canonico H. Chen P. Fallouey A. F. Garbolevsky D. O. Henry M. Ishikawa W. M. Lundy A. R. Nywening E. Upitis F. Zeller D. Kwon, Delegate O. Oldani, Delegate H. Lorenz, Contributing Member Subgroup on Nonferrous Alloys (BPV II) R. C. Sutherlin, Chair M. H. Gilkey, Vice Chair H. Anada J. Calland D. B. Denis J. F. Grubb A. Heino M. Katcher J. A. McMaster L. Paul D. W. Rahoi W. Ren E. Shapiro M. H. Skillingberg D. Tyler J. Weritz R. Wright R. Zawierucha W. R. Apblett, Jr., Contributing Member Subgroup on Physical Properties (BPV II) Executive Committee (BPV II) J. F. Henry, Chair D. W. Rahoi, Vice Chair N. Lobo, Staff Secretary A. Appleton A. Chaudouet J. R. Foulds M. Gold J. F. Grubb, Chair H. D. Bushfield D. B. Denis J. F. Grubb R. W. Mikitka B. W. Roberts R. C. Sutherlin Subgroup on Strength, Ferrous Alloys (BPV II) R. W. Swindeman J. M. Tanosh J. R. Harris III M. H. Jawad C. R. Thomas M. Wadkinson M. Katcher, Contributing Member C. H. Sturgeon, Contributing Member Subgroup on Strength of Weldments (BPV II & BPV IX) W. F. Newell, Jr., Chair S. H. Bowes K. K. Coleman P. D. Flenner J. R. Foulds D. W. Gandy M. Gold K. L. Hayes Subgroup on Ferrous Specifications (BPV II) A. Appleton, Chair K. M. Hottle, Vice Chair P. Wittenbach, Secretary H. Chen B. M. Dingman M. J. Dosdourian P. Fallouey J. D. Fritz T. Graham J. M. Grocki J. F. Grubb C. Hyde S. W. Knowles F. Masuyama C. Pearce D. W. Rahoi B. W. Roberts M. S. Shelton J. P. Shingledecker R. W. Swindeman W. R. Apblett, Jr., Contributing Member H. Murakami, Contributing Member D. S. Janikowski L. J. Lavezzi S. G. Lee W. C. Mack A. S. Melilli K. E. Orie J. Shick E. Upitis J. D. Wilson R. Zawierucha E. G. Nisbett, Contributing Member J. F. Henry J. Penso D. W. Rahoi B. W. Roberts J. P. Shingledecker W. J. Sperko J. P. Swezy, Jr. J. M. Tanzosh Working Group on Materials Database (BPV II) R. W. Swindeman, Chair N. Lobo, Staff Secretary F. Abe J. R. Foulds J. F. Henry M. Katcher B. W. Roberts xix R. C. Sutherlin D. Andrei, Contributing Member J. L. Arnold, Contributing Member W. Hoffelner, Contributing Member T. Lazar, Contributing Member D. T. Peters, Contributing Member W. Ren, Contributing Member This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. J. M. Tanzosh, Chair M. J. Slater, Secretary F. Abe H. Anada D. A. Canonico A. Di Rienzo P. Fallouey J. R. Foulds M. Gold J. A. Hall J. F. Henry K. Kimura Subgroup on External Pressure (BPV II) R. W. Mikitka, Chair D. L. Kurle, Vice Chair J. A. A. Morrow, Secretary L. F. Campbell H. Chen D. S. Griffin J. F. Grubb P. Fallouey E. Shapiro Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). COMMITTEE ON MATERIALS (BPV II) J. F. Henry, Chair D. W. Rahoi, Vice Chair N. Lobo, Staff Secretary F. Abe A. Appleton J. Cameron D. A. Canonico A. Chaudouet P. Fallouey J. R. Foulds D. W. Gandy M. H. Gilkey M. Gold J. F. Grubb J. A. Hall K. M. Hottle M. Katcher O. X. Li F. Masuyama R. K. Nanstad B. W. Roberts No fu J. F. Henry, Chair F. Abe S. H. Bowes D. A. Canonico K. K. Coleman G. Cumino P. D. Flenner J. R. Foulds D. W. Gandy Subcommittee on Design (BPV III) M. Gold F. Masuyama W. F. Newell, Jr. B. W. Roberts W. J. Sperko R. W. Swindeman J. M. Tanzosh R. G. Young R. P. Deubler, Chair D. E. Matthews, Vice Chair G. L. Hollinger, Secretary T. M. Adams G. A. Antaki R. L. Bratton C. W. Bruny P. R. Donavin R. S. Hill III P. Hirschberg M. H. Jawad R. I. Jetter R. B. Keating R. A. Ladefian K. A. Manoly R. J. Masterson M. N. Mitchell W. J. O’Donnell, Sr. E. L. Pleins T.-L. Sham J. P. Tucker K. Wright J. Yang Working Group on Data Analysis (BPV II) J. R. Foulds, Chair F. Abe M. Gold J. F. Grubb J. F. Henry M. Katcher F. Masuyama W. Ren B. W. Roberts M. Subanovic M. J. Swindeman R. W. Swindeman Subgroup on Component Design (SC-D) (BPV III) T. M. Adams, Chair R. B. Keating, Vice Chair S. Pellet, Secretary G. A. Antaki S. Asada J. F. Ball J. R. Cole R. P. Deubler P. Hirschberg H. Kobayashi R. A. Ladefian K. A. Manoly R. J. Masterson D. E. Matthews J. C. Minichiello D. K. Morton China International Working Group (BPV II) X. Wang F. Yang G. Yang R. Ye L. Yin H. Zhang X.-H. Zhang Yingkai Zhang Q. Zhao S. Zhao J. Zou Working Group on Core Support Structures (SG-CD) (BPV III) J. Yang, Chair J. F. Kielb, Secretary L. C. Hartless D. Keck T. Liszkai H. S. Mehta COMMITTEE ON CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS (BPV III) R. S. Hill III, Chair R. B. Keating, Vice Chair J. C. Minichiello, Vice Chair A. Byk, Staff Secretary T. M. Adams A. Appleton R. W. Barnes W. H. Borter C. W. Bruny T. D. Burchell J. R. Cole R. P. Deubler A. C. Eberhardt B. A. Erler G. M. Foster W. Hoffelner R. M. Jessee R. I. Jetter C. C. Kim G. H. Koo V. Kostarev K. A. Manoly D. E. Matthews R. P. McIntyre M. N. Mitchell M. Morishita D. K. Morton T. Nagata R. F. Reedy, Sr. I. Saito C. T. Smith W. K. Sowder, Jr. W. J. Sperko K. R. Wichman C. S. Withers Y. H. Choi, Delegate T. Ius, Delegate H.-T. Wang, Delegate M. Zhou, Contributing Member E. B. Branch, Honorary Member G. D. Cooper, Honorary Member W. D. Doty, Honorary Member D. F. Landers, Honorary Member R. A. Moen, Honorary Member C. J. Pieper, Honorary Member M. Nakajima M. D. Snyder A. Tsirigotis R. Vollmer J. T. Land, Contributing Member Working Group on Design of Division 3 Containments (SG-CD) (BPV III) D. K. Morton, Chair D. J. Ammerman G. Bjorkman G. Broz S. Horowitz D. W. Lewis J. C. Minichiello E. L. Pleins C. J. Temus I. D. McInnes, Contributing Member R. E. Nickell, Contributing Member H. P. Shrivastava, Contributing Member Working Group on HDPE Design of Components (SG-CD) (BPV III) T. M. Musto, Chair J. Ossmann, Secretary T. M. Adams T. A. Bacon C. Basavaraju D. Burwell S. Choi xx P. Krishnaswamy M. Martin J. C. Minichiello D. P. Munson F. J. Schaaf, Jr. R. Stakenborghs H. E. Svetlik This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. B. Shou, Chair Yong Zhang, Vice Chair X. Tong, Secretary W. Fang Q. C. Feng S. Huo H. Li J. Li S. Li Z. Rongcan S. Tan C. Wang T. M. Musto T. Nagata A. N. Nguyen E. L. Pleins I. Saito G. C. Slagis J. R. Stinson G. Z. Tokarski J. P. Tucker P. Vock K. R. Wichman C. Wilson J. Yang C. W. Bruny, Contributing Member A. A. Dermenjian, Contributing Member Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Working Group on Creep Strength Enhanced Ferritic Steels (BPV II) No fu Subgroup on Design Methods (SC-D) (BPV III) R. B. Keating V. Kostarev Y. Liu J. F. McCabe J. C. Minichiello I.-K. Nam A. N. Nguyen M. S. Sills G. C. Slagis N. C. Sutherland E. A. Wais C.-I. Wu J. J. Martinez, Contributing Member N. J. Shah, Contributing Member E. C. Rodabaugh, Honorary Member C. W. Bruny, Chair S. McKillop, Secretary K. Avrithi W. Culp P. R. Donavin, Jr. J. V. Gregg, Jr. H. T. Harrison III K. Hsu M. Kassar Working Group on Design Methodology (SG-DM) (BPV III) S. D. Snow, Chair M. R. Breach, Secretary K. Avrithi C. Basavaraju R. D. Blevins D. L. Caldwell D. Dewees C. M. Faidy H. T. Harrison III P. Hirschberg M. Kassar R. B. Keating J. Kim H. Kobayashi Working Group on Pressure Relief (SG-CD) (BPV III) J. F. Ball, Chair A. L. Szeglin D. G. Thibault Working Group on Pumps (SG-CD) (BPV III) R. A. Ladefian, Chair P. W. Behnke R. E. Cornman, Jr. M. D. Eftychiou A. Fraser M. A. Gaydon R. Ghanbari M. Higuchi R. A. Patrick J. Sulley Working Group on Environmental Effects (SG-DM) (BPV III) R. Udo S. Pellet I. Saito H. P. Shrivastava C. Stirzel T. G. Terryah G. Z. Tokarski P. Wiseman C.-I. Wu C. Jonker J. E. Nestell T. Schriefer M. S. Shelton Y. H. Choi, Delegate Working Group on Environmental Fatigue Evaluation Methods (SG-DM) (BPV III) K. Wright, Chair M. A. Gray, Vice Chair W. F. Weitze, Secretary T. M. Adams S. Asada K. Avrithi R. C. Cipolla J. R. Cole T. M. Damiani C. M. Faidy C. A. Mizer K. E. Reid II H. R. Sonderegger J. Sully I. Tseng J. P. Tucker T. D. Gilman S. R. Gosselin Y. He P. Hirschberg H. S. Mehta J.-S. Park D. H. Roarty I. Saito D. Vlaicu R. Z. Ziegler Working Group on Fatigue Strength (SG-DM) (BPV III) P. R. Donavin, Chair T. M. Damiani D. Dewees C. M. Faidy S. R. Gosselin R. J. Gurdal C. F. Heberling II C. E. Hinnant P. Hirschberg K. Hsu S. H. Kleinsmith S. Majumdar Working Group on Vessels (SG-CD) (BPV III) D. E. Matthews, Chair R. M. Wilson, Secretary C. Basavaraju J. V. Gregg, Jr. W. J. Heilker A. Kalnins R. B. Keating D. Keck J. Kim O.-S. Kim K. Matsunaga M. C. Scott P. K. Shah J. Shupert C. Turylo D. Vlaicu W. F. Weitze T. Yamazaki R. Z. Ziegler xxi S. N. Malik D. H. Roarty M. S. Shelton G. Taxacher A. Tsirigotis K. Wright H. H. Ziada G. S. Chakrabarti, Contributing Member W. J. O'Donnell, Sr., Contributing Member This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. W. Culp, Chair B. D. Frew, Secretary K. Avrithi P. J. Dobson W. J. Heilker A. G. Washburn Working Group on Valves (SG-CD) (BPV III) P. Vock, Chair J. O'Callaghan, Secretary M. C. Buckley G. A. Jolly J. Klein T. A. McMahon T. Liszkai J. F. McCabe A. N. Nguyen W. D. Reinhardt D. H. Roarty P. K. Shah R. Vollmer S. Wang T. M. Wiger K. Wright J. Yang M. K. Au-Yang, Contributing Member S. Mauvais Working Group on Supports (SG-CD) (BPV III) J. R. Stinson, Chair U. S. Bandyopadhyay, Secretary K. Avrithi T. H. Baker F. J. Birch R. P. Deubler N. M. Graham R. J. Masterson D. Keck M. N. Mitchell W. J. O’Donnell, Sr. P. J. O’Regan W. D. Reinhardt P. Smith S. D. Snow W. F. Weitze K. Wright Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Working Group on Piping (SG-CD) (BPV III) G. A. Antaki, Chair G. Z. Tokarski, Secretary T. M. Adams T. A. Bacon C. Basavaraju J. Catalano F. Claeys J. R. Cole C. M. Faidy R. G. Gilada N. M. Graham M. A. Gray R. W. Haupt A. Hirano P. Hirschberg M. Kassar J. Kawahata No fu M. N. Mitchell, Chair M. W. Davies, Vice Chair C. A. Sanna, Staff Secretary T. D. Burchell, Secretary A. Appleton R. L. Bratton S. Cadell S.-H. Chi A. Covac S. W. Doms S. F. Duffy S. T. Gonczy Y. Katoh J. Ossmann M. Roemmler N. Salstrom T. Shibata S. Yu G. L. Zeng T. Asayama, Chair M. Li, Secretary F. W. Brust P. Carter R. I. Jetter G. H. Koo B.-L. Lyow S. N. Malik H. Qian T.-I. Sham Working Group on Elevated Temperature Construction (SG-ETD) (BPV III) M. H. Jawad, Chair B. Mollitor, Secretary D. I. Anderson R. G. Brown D. Dewees J. P. Glaspie B. F. Hantz Working Group on Probabilistic Methods in Design (SG-DM) (BPV III) P. J. O'Regan, Chair M. Golliet, Secretary T. Asayama K. Avrithi M. R. Graybeal D. O. Henry R. S. Hill III M. Morishita N. A. Palm I. Saito Special Working Group on Computational Modeling for Explicit Dynamics (SG-DM) (BPV III) G. Bjorkman, Chair D. J. Ammerman, Secretary M. R. Breach G. Broz J. Jordan D. Molitoris J. Piotter G. L. Hollinger R. I. Jetter S. Krishnamurthy A. Mann D. L. Marriott M. N. Mitchell C. Nadarajah Working Group on High Temperature Flaw Evaluation (SG-ETD) (BPV III) W. D. Reinhardt P. Y.-K. Shih F. W. Brust, Chair N. Broom P. Carter W. Hoffelner S. N. Malik S. D. Snow C.-F. Tso M. C. Yaksh U. Zencker D. L. Rudland P. J. Rush D.-J. Shim S. X. Xu T.-L. Sham, Chair T. Asayama C. Becht IV F. W. Brust P. Carter J. F. Cervenka B. F. Hantz W. Hoffelner A. B. Hull M. H. Jawad R. I. Jetter G. H. Koo M. Li S. Majumdar J. E. Nestell W. J. O'Donnell, Sr. R. W. Swindeman D. S. Griffin, Contributing Member W. J. Koves, Contributing Member D. L. Marriott, Contributing Member Subgroup on General Requirements (BPV III) R. P. McIntyre, Chair L. M. Plante, Secretary V. Apostolescu A. Appleton S. Bell J. R. Berry B. K. Bobo J. DeKleine J. V. Gardiner G. Gratti J. W. Highlands G. V. Imbro K. A. Kavanagh Working Group on Allowable Stress Criteria (SG-ETD) (BPV III) R. W. Swindeman, Chair R. Wright, Secretary J. R. Foulds K. Kimura M. Li S. N. Malik J. E. Nestell W. Ren B. W. Roberts M. Sengupta Working Group on Duties and Responsibilities (SG-GR) (BPV III) T.-I. Sham J. V. Gardiner, Chair G. L. Hollinger, Secretary S. Bell J. R. Berry J. DeKleine N. DeSantis Y. Diaz-Castillo E. L. Farrow Working Group on Analysis Methods (SG-ETD) (BPV III) P. Carter, Chair M. J. Swindeman, Secretary M. Ando M. R. Breach Y.-S. Kim M. R. Minick E. C. Renaud D. J. Roszman C. T. Smith W. K. Sowder, Jr. G. E. Szabatura T. G. Terryah D. M. Vickery C. S. Withers H. Michael, Delegate G. L. Hollinger, Contributing Member R. I. Jetter S. Krishnamurthy T.-I. Sham D. K. Williams xxii G. Gratti B. N. Juarez K. A. Kavanagh J. M. Lyons L. M. Plante D. J. Roszman T. G. Terryah This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Subgroup on Elevated Temperature Design (SC-D) (BPV III) Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Working Group on Creep-Fatigue and Negligible Creep (SG-ETD) (BPV III) Working Group on Graphite and Composites Design (SG-DM) (BPV III) No fu C. T. Smith, Chair C. S. Withers, Secretary V. Apostolescu A. Appleton B. K. Bobo S. M. Goodwin J. Grimm J. W. Highlands Y.-S. Kim B. McGlone R. P. McIntyre M. Golliet, Chair M. A. Martin, Secretary W. H. Borter M. C. Buckley E. M. Focht B. Hauger J. Johnston, Jr. P. Krishnaswamy M. R. Minick R. B. Patel E. C. Renaud T. Rezk J. Rogers W. K. Sowder, Jr. J. F. Strunk G. E. Szabatura D. M. Vickery C. A. Spletter, Contributing Member Joint ACI-ASME Committee on Concrete Components for Nuclear Service (BPV III) A. C. Eberhardt, Chair C. T. Smith, Vice Chair A. Byk, Staff Secretary J. F. Artuso C. J. Bang F. Farzam P. S. Ghosal B. D. Hovis T. C. Inman O. Jovall N.-H. Lee J. McLean J. Munshi N. Orbovic J. F. Strunk Special Working Group on General Requirements Consolidation (SG-GR) (BPV III) J. V. Gardiner, Chair C. T. Smith, Vice Chair S. Bell M. Cusick Y. Diaz-Castillo J. Grimm J. M. Lyons M. McGlone R. Patel E. C. Renaud E. W. McElroy T. M. Musto S. Patterson S. Schuessler R. Stakenborghs T. Tipton M. Troughton Z. J. Zhou T. Rezk J. Rogers D. J. Roszman B. S. Sandhu G. J. Solovey R. Spuhl G. E. Szabatura C. S. Withers S. F. Harrison, Contributing Member T. Tonyan T. J. Ahl, Contributing Member N. Alchaar, Contributing Member B. A. Erler, Contributing Member J. Gutierrez, Contributing Member M. F. Hessheimer, Contributing Member T. E. Johnson, Contributing Member T. Muraki, Contributing Member B. B. Scott, Contributing Member M. R. Senecal, Contributing Member M. K. Thumm, Contributing Member Working Group on Design (BPV III-2) R. M. Jessee, Chair B. D. Frew, Vice Chair S. Hunter, Secretary W. H. Borter T. D. Burchell G. R. Cannell R. H. Davis G. M. Foster G. B. Georgiev S. E. Gingrich M. Golliet J. Grimm J. Johnston, Jr. C. C. Kim M. Lashley T. Melfi H. Murakami J. Ossmann J. E. O’Sullivan C. Pearce N. M. Simpson W. J. Sperko J. R. Stinson J. F. Strunk K. B. Stuckey R. Wright S. Yee H. Michael, Delegate R. W. Barnes, Contributing Member Working Group on Materials, Fabrication, and Examination (BPV III-2) P. S. Ghosal, Chair T. Tonyan, Vice Chair M. Allam J. F. Artuso J.-B. Domage A. C. Eberhardt C. Jones Working Group on Graphite and Composite Materials (SG-MFE) (BPV III) T. D. Burchell, Chair A. Appleton R. L. Bratton S. Cadell S.-H. Chi A. Covac M. W. Davies S. W. Doms S. F. Duffy S. T. Gonzcy M. Diaz, Contributing Member S. Diaz, Contributing Member M. F. Hessheimer, Contributing Member A. Istar, Contributing Member T. E. Johnson, Contributing Member B. R. Laskewitz, Contributing Member Z. Shang, Contributing Member M. Sircar, Contributing Member M. G. Jenkins Y. Katoh M. N. Mitchell J. Ossmann M. Roemmler N. Salstrom T. Shibata S. Yu G. L. Zeng C. T. Smith J. F. Strunk D. Ufuk J. Gutierrez, Contributing Member B. B. Scott, Contributing Member Z. Shang, Contributing Member Special Working Group on Modernization (BPV III-2) J. McLean, Chair N. Orbovic, Vice Chair A. Adediran N. Alchaar O. Jovall C. T. Smith xxiii M. A. Ugalde S. Wang S. Diaz, Contributing Member J.-B. Domage, Contributing Member U. Ricklefs, Contributing Member This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. J. Munshi, Chair N. Alchaar M. Allam S. Bae L. J. Colarusso A. C. Eberhardt F. Farzam P. S. Ghosal B. D. Hovis T. C. Inman O. Jovall N.-H. Lee Subgroup on Materials, Fabrication, and Examination (BPV III) Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Working Group on HDPE Materials (SG-MFE) (BPV III) Working Group on Quality Assurance, Certification, and Stamping (SG-GR) (BPV III) No fu D. K. Morton, Chair G. M. Foster, Vice Chair G. R. Cannell, Secretary G. Abramczyk D. J. Ammerman G. Bjorkman S. Horowitz D. W. Lewis P. E. McConnell R. E. Nickell E. L. Pleins J. E. Nestell, Chair M. Sengupta, Secretary N. Broom T. D. Burchell R. S. Hill III E. V. Imbro R. I. Jetter Y. W. Kim R. H. Smith G. J. Solovey C. J. Temus W. H. Borter, Contributing Member R. S. Hill III, Contributing Member A. B. Meichler, Contributing Member T. Saegusa, Contributing Member N. M. Simpson, Contributing Member Working Group on High Temperature Liquid-Cooled Reactors (BPV III-5) Subgroup on Fusion Energy Devices (BPV III) W. K. Sowder, Jr., Chair D. Andrei, Staff Secretary D. J. Roszman, Secretary R. W. Barnes B. R. Doshi M. Higuchi G. Holtmeier M. Kalsey K. A. Kavanagh H. J. Kim K. Kim T. R. Lupold S. N. Malik D. L. Marriott D. K. Morton T.-L. Sham X. Li, Contributing Member L. Shi, Contributing Member I. Kimihiro S. Lee G. Li X. Li P. Mokaria T. R. Muldoon M. Porton Y. Song M. Trosen C. Waldon I. J. Zatz T.-L. Sham, Chair T. Asayama, Secretary M. Arcaro R. W. Barnes P. Carter M. E. Cohen A. B. Hull R. I. Jetter G. H. Koo M. Li S. Majumdar M. Morishita J. E. Nestell X. Li, Contributing Member G. Wu, Contributing Member Executive Committee (BPV III) Working Group on General Requirements (BPV III-4) Working Group on In-Vessel Components (BPV III-4) M. Kalsey, Chair R. P. McIntyre J. C. Minichiello M. Morishita D. K. Morton C. A. Sanna T.-L. Sham W. K. Sowder, Jr. Working Group on Magnets (BPV III-4) K. Kim, Chair China International Working Group (BPV III) J. Yan, Chair W. Tang, Vice Chair C. A. Sanna, Staff Secretary Y. He, Secretary H. Ge Z. Han J. Jian Y. Jing F. Kai D. Kang X. Li Y. Li B. Liang H. Lin S. Lin J. Liu S. Liu W. Liu K. Mao W. Pei Working Group on Materials (BPV III-4) M. Porton, Chair Working Group on Vacuum Vessels (BPV III-4) I. Kimihiro, Chair B. R. Doshi Subgroup on High Temperature Reactors (BPV III) M. Morishita, Chair R. I. Jetter, Vice Chair T.-L. Sham, Secretary N. Broom T. D. Burchell W. Hoffelner G.-H. Koo D. K. Morton J. E. Nestell N. N. Ray X. Li, Contributing Member L. Shi, Contributing Member xxiv G. Sun G. Tang Y. Tu Y. Wang H. Wu X. Wu Z. Wu S. Xue Z. Yan C. Ye Z. Yin S. Zaozhan G. Zhang K. Zhang W. Zhang G. Zhao W. Zhao Y. Zhong Z. Zhong G. Zhu This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. R. S. Hill III, Chair A. Byk, Staff Secretary T. M. Adams C. W. Bruny R. P. Deubler A. C. Eberhardt R. M. Jessee R. B. Keating W. K. Sowder, Jr., Chair Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Working Group on High Temperature Gas-Cooled Reactors (BPV III-5) Subgroup on Containment Systems for Spent Fuel and High-Level Waste Transport Packagings (BPV III) No fu D. Ostermann G. Roos J. Rudolph C. A. Sanna H. Schau C. A. Spletter R. Trieglaff P. Völlmecke J. Wendt F. Wille M. Winter N. Wirtz R. M. Jessee, Chair A. Appleton R. W. Barnes Special Working Group on Industry Experience for New Plants (BPV III & BPV XI) G. M. Foster, Chair J. T. Lindberg, Chair H. L. Gustin, Secretary J. Ossmann, Secretary T. L. Chan D. R. Graham P. J. Hennessey D. O. Henry J. Honcharik E. V. Imbro C. G. Kim O.-S. Kim India International Working Group (BPV III) B. Basu, Chair G. Mathivanan, Vice Chair C. A. Sanna, Staff Secretary S. B. Parkash, Secretary V. Bhasin P. Chellapandi S. Jalaldeen D. Kulkarni S. A. Kumar De N. M. Nadaph R. N. Sen A. Sundararajan Special Working Group on International Meetings (BPV III) C. T. Smith, Chair A. Byk, Staff Secretary T. D. Burchell S. W. Cameron J. R. Cole R. L. Crane G. M. Foster R. S. Hill III M. N. Mitchell R. F. Reedy, Sr. C. A. Sanna Special Working Group on New Advanced Light Water Reactor Plant Construction Issues (BPV III) E. L. Pleins, Chair M. C. Scott, Secretary A. Cardillo P. J. Coco B. Gilligan J. Honcharik G. V. Imbro O.-S Kim M. Kris J. C. Minichiello D. W. Sandusky C. A. Sanna R. R. Stevenson R. Troficanto M. L. Wilson J. Yan Special Working Group on Regulatory Interface (BPV III) J. C. Minichiello L. M. Plante R. F. Reedy, Sr. W. K. Sowder, Jr. C. Wilson G. V. Imbro, Chair S. Bell, Secretary A. Cardillo A. A. Dermenjian B. N. Juarez K. Matsunaga D. E. Matthews A. T. Roberts III R. R. Stevenson D. Terao M. L. Wilson R. A. Yonekawa Special Working Group on HDPE Stakeholders (BPV III) D. Burwell, Chair S. Patterson, Secretary T. M. Adams S. Bruce S. Choi C. M. Faidy E. M. Focht M. Golliet J. Grimes R. M. Jessee J. Johnston, Jr. D. Keller M. Lashley T. R. Lupold K. A. Manoly D. P. Munson T. M. Musto J. E. O’Sullivan M. A. Richter V. Rohatgi F. J. Schaaf, Jr. R. Stakenborghs M. Troughton Z. J. Zhou COMMITTEE ON HEATING BOILERS (BPV IV) T. L. Bedeaux, Chair J. A. Hall, Vice Chair G. Moino, Staff Secretary B. Calderon J. Calland J. P. Chicoine C. M. Dove A. Heino B. J. Iske P. A. Molvie xxv R. E. Olson M. Wadkinson R. V. Wielgoszinski H. Michael, Delegate D. Picart, Delegate S. V. Voorhees, Contributing Member J. L. Kleiss, Alternate W. L. Haag, Jr., Honorary Member This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. D. Kwon B. Lee D. Lee Sanghoon Lee Sangil Lee D. J. Lim H. Lim I.-K. Nam B. Noh C.-K. Oh C. Park J.-S. Park T. Shin S. Song O. Yoo Special Working Group on Editing and Review (BPV III) D. K. Morton, Chair R. L. Bratton R. P. Deubler A. C. Eberhardt R. I. Jetter Y.-S. Kim K. Matsunaga D. E. Matthews R. E. McLaughlin E. L. Pleins D. W. Sandusky D. M. Swann T. Tsuruta E. R. Willis R. M. Wilson S. M. Yee M. Ponnusamy Korea International Working Group (BPV III) G. H. Koo, Chair S. S. Hwang, Vice Chair O.-S. Kim, Secretary H. S. Byun S. Choi J.-Y. Hong N.-S. Huh J.-K. Hwang C. Jang I. I. Jeong H. J. Kim J. Kim J.-S. Kim K. Kim Y.-B. Kim Y.-S. Kim J. R. Cole D. E. Matthews J. C. Minichiello Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Special Working Group on Honors and Awards (BPV III) Germany International Working Group (BPV III) C. Huttner, Chair H.-R. Bath, Secretary B. Arndt M. Bauer G. Daum L. Gerstner G. Haenle K.-H. Herter U. Jendrich G. Kramarz C. Krumb W. Mayinger D. Moehring No fu J. A. Hall P. A. Molvie N. A. Finney, Chair D. Adkins J. Anderson T. G. Bollhalter C. T. Brown N. Carter Subgroup on Cast Iron Boilers (BPV IV) J. P. Chicoine, Chair T. L. Bedeaux, Vice Chair C. M. Dove J. M. Downs J. A. Hall J. L. Kleiss M. Ghahremani J. W. Mefford, Jr. M. Sens D. Van Allen Subgroup on Surface Examination Methods (BPV V) S. A. Johnson, Chair J. Halley, Vice Chair S. J. Akrin J. E. Batey A. S. Birks P. L. Brown B. Caccamise N. Y. Faransso N. Farenbaugh N. A. Finney Subgroup on Materials (BPV IV) J. A. Hall, Chair M. Wadkinson, Vice Chair J. Calland J. M. Downs J. L. Garner A. Heino B. J. Iske J. L. Kleiss E. Rightmier G. W. Hembree R. W. Kruzic B. D. Laite C. May L. E. Mullins A. B. Nagel F. J. Sattler P. Shaw G. M. Gatti, Delegate Subgroup on Water Heaters (BPV IV) J. Calland, Chair J. P. Chicoine B. J. Iske Subgroup on Volumetric Methods (BPV V) R. E. Olson T. E. Trant A. B. Nagel, Chair N. A. Finney, Vice Chair S. J. Akrin J. E. Batey P. L. Brown B. Caccamise N. Y. Faransso A. F. Garbolevsky J. F. Halley R. W. Hardy Subgroup on Welded Boilers (BPV IV) J. Calland, Chair T. L. Bedeaux B. Calderon J. L. Kleiss P. A. Molvie R. E. Olson M. Wadkinson R. V. Wielgoszinski N. Y. Faransso, Chair J. E. Batey, Vice Chair J. W. Houf S. A. Johnson R. W. Kruzic C. May A. B. Nagel T. L. Plasek F. J. Sattler G. M. Gatti, Delegate X. Guiping, Delegate B. D. Laite, Alternate H. C. Graber, Honorary Member O. F. Hedden, Honorary Member J. R. MacKay, Honorary Member T. G. McCarty, Honorary Member Working Group on Radiography (SG-VM) (BPV V) B. Caccamise, Chair F. B. Kovacs, Vice Chair S. J. Akrin J. E. Batey P. L. Brown C. Emslander N. Y. Faransso A. F. Garbolevsky R. W. Hardy G. W. Hembree Subgroup on General Requirements/Personnel Qualifications and Inquiries (BPV V) F. B. Kovacs, Chair J. W. Houf, Vice Chair S. J. Akrin C. A. Anderson J. E. Batey A. S. Birks C. Emslander N. Y. Faransso S. R. Doctor R. K. Miller S. A. Johnson R. W. Kruzic B. D. Laite S. Mango C. May R. J. Mills A. B. Nagel T. L. Plasek M. Torok Working Group on Ultrasonics (SG-VM) (BPV V) N. A. Finney N. A. Finney, Chair J. F. Halley, Vice Chair B. Caccamise K. J. Chizen J. M. Davis N. Y. Faransso P. T. Hayes S. A. Johnson G. W. Hembree S. A. Johnson D. I. Morris A. B. Nagel J. P. Swezy, Jr., Contributing Member xxvi R. W. Kruzic B. D. Laite C. May L. E. Mullins A. B. Nagel F. J. Sattler M. Torok This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Working Group on Acoustic Emissions (SG-VM) (BPV V) COMMITTEE ON NONDESTRUCTIVE EXAMINATION (BPV V) G. W. Hembree, Chair F. B. Kovacs, Vice Chair J. S. Brzuszkiewicz, Staff Secretary S. J. Akrin C. A. Anderson J. E. Batey A. S. Birks P. L. Brown M. A. Burns B. Caccamise N. Y. Faransso N. A. Finney A. F. Garbolevsky J. F. Halley G. W. Hembree S. A. Johnson F. B. Kovacs R. W. Kruzic C. May L. E. Mullins T. L. Plasek F. J. Sattler M. Torok G. M. Gatti, Delegate Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Special Working Group on NDE Resource Support (SG-GR/PQ & I) (BPV V) Subgroup on Care and Operation of Heating Boilers (BPV IV) M. Wadkinson, Chair T. L. Bedeaux J. Calland No fu N. Y. Faransso, Chair J. E. Batey, Vice Chair D. Alleyne N. Amir J. F. Halley S. A. Johnson G. M. Light P. Mudge M. J. Quarry J. Vanvelsor COMMITTEE ON PRESSURE VESSELS (VIII) R. J. Basile, Chair S. C. Roberts, Vice Chair S. J. Rossi, Staff Secretary T. Schellens, Staff Secretary G. Aurioles, Sr. V. Bogosian J. Cameron A. Chaudouet D. B. DeMichael J. P. Glaspie J. F. Grubb L. E. Hayden, Jr. G. G. Karcher D. L. Kurle K. T. Lau M. D. Lower R. Mahadeen R. W. Mikitka U. R. Miller T. W. Norton T. P. Pastor D. T. Peters M. J. Pischke M. D. Rana G. B. Rawls, Jr. F. L. Richter C. D. Rodery E. Soltow D. A. Swanson J. P. Swezy, Jr. S. Terada E. Upitis P. A. McGowan, Delegate H. Michael, Delegate K. Oyamada, Delegate M. E. Papponetti, Delegate D. Rui, Delegate T. Tahara, Delegate M. Gold, Contributing Member W. S. Jacobs, Contributing Member K. Mokhtarian, Contributing Member C. C. Neely, Contributing Member A. Selz, Contributing Member K. K. Tam, Contributing Member Subgroup on Design (BPV VIII) T. P. Pastor M. D. Rana G. B. Rawls, Jr. S. C. Roberts C. D. Rodery D. Srnic J. Vattappilly R. A. Whipple K. Xu K. Oyamada, Delegate M. E. Papponetti, Delegate W. S. Jacobs, Contributing Member P. K. Lam, Contributing Member K. Mokhtarian, Contributing Member A. Selz, Contributing Member S. C. Shah, Contributing Member K. K. Tam, Contributing Member P. L. Sturgill E. A. Whittle K. Oyamada, Delegate W. J. Bees, Contributing Member W. S. Jacobs, Contributing Member J. Lee, Contributing Member R. Uebel, Contributing Member E. Upitis, Contributing Member Subgroup on General Requirements (BPV VIII) M. D. Lower, Chair J. P. Glaspie, Vice Chair F. L. Richter, Secretary R. J. Basile V. Bogosian D. T. Davis D. B. DeMichael M. Faulkener L. E. Hayden, Jr. K. T. Lau A. S. Olivares T. P. Pastor S. C. Roberts J. C. Sowinski P. Speranza D. B. Stewart D. A. Swanson R. Uebel K. Oyamada, Delegate C. C. Neely, Contributing Member Task Group on U-2(g) (BPV VIII) S. R. Babka R. J. Basile D. K. Chandiramani R. Mahadeen U. R. Miller T. W. Norton T. P. Pastor R. F. Reedy, Sr. S. C. Roberts M. A. Shah, Jr. D. Srnic D. A. Swanson R. Uebel K. K. Tam, Contributing Member Subgroup on Heat Transfer Equipment (BPV VIII) G. Aurioles, Sr., Chair P. Matkovics, Secretary D. Angstadt S. R. Babka M. Bahadori J. H. Barbee O. A. Barsky I. G. Campbell A. Chaudouet M. D. Clark S. Jeyakumar G. G. Karcher D. L. Kurle B. J. Lerch R. Mahadeen S. Mayeux U. R. Miller T. W. Norton K. Oyamada D. Srnic A. M. Voytko R. P. Wiberg F. E. Jehrio, Contributing Member J. Mauritz, Contributing Member F. Osweiller, Contributing Member R. Tiwari, Contributing Member S. Yokell, Contributing Member S. M. Caldwell, Honorary Member Working Group on Design-By-Analysis (BPV III) B. F. Hantz, Chair T. W. Norton, Secretary R. G. Brown D. Dewees R. D. Dixon Z. Gu C. E. Hinnant R. Jain M. H. Jawad S. Krishnamurthy A. Mann G. A. Miller C. Nadarajah M. D. Rana T. G. Seipp M. A. Shah S. Terada D. Arnett, Contributing Member Task Group on Plate Heat Exchangers (BPV VIII) M. J. Pischke, Chair S. R. Babka S. Flynn J. F. Grubb F. Hamtak J. E. Lane xxvii R. Mahadeen P. Metkovics D. I. Morris C. M. Romero E. Soltow D. Srnic This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. D. A. Swanson, Chair J. C. Sowinski, Vice Chair M. Faulkner, Secretary G. Aurioles, Sr. S. R. Babka O. A. Barsky R. J. Basile M. R. Breach F. L. Brown D. Chandiramani B. F. Hantz C. E. Hinnant C. S. Hinson M. H. Jawad D. L. Kurle M. D. Lower R. W. Mikitka U. R. Miller C. D. Rodery, Chair J. P. Swezy, Jr., Vice Chair B. R. Morelock, Secretary L. F. Campbell D. I. Morris O. Mulet M. J. Pischke M. J. Rice B. F. Shelley Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Subgroup on Fabrication and Inspection (BPV VIII) Working Group on Guided Wave Ultrasonic Testing (SG-VM) (BPV V) No fu Special Working Group on Bolted Flanged Joints (BPV VIII) G. T. Nelson E. A. Rodriguez E. D. Roll K. C. Simpson, Jr. D. L. Stang F. W. Tatar S. Terada J. L. Traud R. Wink K.-J. Young K. Oyamada, Delegate R. M. Hoshman, Contributing Member G. J. Mraz, Contributing Member D. J. Burns, Honorary Member E. H. Perez, Honorary Member R. W. Mikitka, Chair G. D. Bibel W. Brown H. Chen W. J. Koves Working Group on Design (BPV VIII Div. 3) Subgroup on Materials (BPV VIII) J. F. Grubb, Chair J. Cameron, Vice Chair P. G. Wittenbach, Secretary A. Di Rienzo J. D. Fritz M. Katcher M. Kowalczyk W. M. Lundy J. Penso D. W. Rahoi M. Morishita J. R. Payne G. B. Rawls, Jr. M. S. Shelton R. C. Sutherlin E. Upitis K. Xu K. Oyamada, Delegate G. S. Dixit, Contributing Member M. Gold, Contributing Member J. A. McMaster, Contributing Member E. G. Nisbett, Contributing Member J. Keltjens, Chair C. Becht V R. C. Biel R. Cordes R. D. Dixon L. Fridlund R. T. Hallman G. M. Mital S. C. Mordre G. T. Nelson D. T. Peters E. D. Roll K. C. Simpson D. L. Stang K. Subramanian S. Terada J. L. Traud R. Wink Y. Xu F. Kirkemo, Contributing Member D. J. Burns, Honorary Member D. M. Fryer, Honorary Member G. J. Mraz, Honorary Member E. H. Perez, Honorary Member Working Group on Materials (BPV VIII Div. 3) F. W. Tatar, Chair L. P. Antalffy P. N. Chaku J. A. Kapp A. K. Khare Subgroup on Toughness (BPV II & BPV VIII) J. P. Swezy, Jr. E. Upitis K. Oyamada, Delegate K. Mokhtarian, Contributing Member C. C. Neely, Contributing Member Subgroup on Graphite Pressure Equipment (BPV VIII) E. Soltow, Chair G. C. Becherer T. F. Bonn F. L. Brown Task Group on Impulsively Loaded Vessels (BPV VIII) J. Vattappilly M. R. Minick A. A. Stupica A. Viet E. A. Rodriguez, Chair P. O. Leslie, Secretary G. A. Antaki J. K. Asahina D. D. Barker A. M. Clayton J. E. Didlake, Jr. T. A. Duffey B. L. Haroldsen K. Hayashi D. Hilding K. W. King R. Kitamura R. A. Leishear R. E. Nickell F. Ohlson C. Romero N. Rushton J. H. Stofleth Q. Dong, Contributing Member H.-P. Schildberg, Contributing Member J. E. Shepherd, Contributing Member M. Yip, Contributing Member Italy International Working Group (BPV VIII) G. Pontiggia, Chair A. Veroni, Secretary B. G. Alborali P. Angelini R. Boatti A. Camanni P. Conti P. L. Dinelli F. Finco L. Gaetani A. Ghidini M. Guglielmetti P. Mantovani M. Maroni M. Massobrio L. Moracchioli L. Possenti C. Sangaletti A. Teli I. Venier G. Gobbi, Contributing Member Subgroup on Interpretations (BPV VIII) U. R. Miller, Chair T. Schellens, Staff Secretary G. Aurioles, Sr. R. J. Basile J. Cameron R. D. Dixon J. F. Grubb D. L. Kurle M. D. Lower R. Mahadeen xxviii D. T. Peters S. C. Roberts C. D. Rodery D. B. Stewart P. L. Sturgill D. A. Swanson J. P. Swezy, Jr. J. Vattappilly T. P. Pastor, Contributing Member This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. D. L. Kurle, Chair K. Xu, Vice Chair R. J. Basile W. S. Jacobs M. D. Rana F. L. Richter K. Subramanian D. A. Swanson Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Subgroup on High Pressure Vessels (BPV VIII) D. T. Peters, Chair R. D. Dixon, Vice Chair R. T. Hallman, Vice Chair A. P. Maslowski, Staff Secretary L. P. Antalffy R. C. Biel P. N. Chaku R. Cordes L. Fridlund D. M. Fryer A. H. Honza J. A. Kapp J. Keltjens A. K. Khare N. McKie S. C. Mordre No fu M. B. Sims M. J. Stanko P. L. Sturgill J. P. Swezy, Jr. P. L. Van Fosson R. R. Young A. Roza, Delegate R. K. Brown, Jr., Contributing Member M. Consonni, Contributing Member S. A. Jones, Contributing Member S. Raghunathan, Contributing Member W. D. Doty, Honorary Member B. R. Newmark, Honorary Member S. D. Reynolds, Jr., Honorary Member M. L. Carpenter, Chair D. Burwell J. M. Craig M. Ghahremani K. L. Hayes R. M. Jessee J. Johnston, Jr. E. W. McElroy J. E. O’Sullivan E. G. Reichelt M. J. Rice Subgroup on Procedure Qualification (BPV IX) D. A. Bowers, Chair M. J. Rice, Secretary M. Bernasek M. A. Boring L. Harbison W. M. Lundy W. F. Newell, Jr. S. Raghunathan Subgroup on Brazing (BPV IX) M. J. Pischke, Chair E. W. Beckman L. F. Campbell M. L. Carpenter A. F. Garbolevsky A. R. Nywening J. P. Swezy, Jr. M. B. Sims W. J. Sperko S. A. Sprague J. P. Swezy, Jr. P. L. Van Fosson T. C. Wiesner D. Chandiramani, Contributing Member COMMITTEE ON FIBER-REINFORCED PLASTIC PRESSURE VESSELS (BPV X) A. S. Olivares D. K. Peetz H. B. Porter K. R. Willens E. W. Woelfel E. Molina, Delegate B. R. Newmark, Honorary Member L. E. Hunt D. L. Keeler B. M. Linnemann N. L. Newhouse D. J. Painter G. Ramirez J. R. Richter F. W. Van Name D. O. Yancey, Jr. P. H. Ziehl COMMITTEE ON NUCLEAR INSERVICE INSPECTION (BPV XI) G. C. Park, Chair R. W. Swayne, Vice Chair R. A. Yonekawa, Vice Chair R. L. Crane, Staff Secretary J. M. Agold V. L. Armentrout J. F. Ball W. H. Bamford T. L. Chan R. C. Cipolla D. D. Davis G. H. DeBoo R. L. Dyle E. V. Farrell, Jr. E. L. Farrow E. B. Gerlach R. E. Gimple T. J. Griesbach D. O. Henry R. D. Kerr S. D. Kulat D. W. Lamond D. R. Lee Subgroup on Materials (BPV IX) M. Bernasek, Chair T. Anderson J. L. Arnold M. L. Carpenter E. Cutlip S. S. Fiore S. E. Gingrich L. Harbison R. M. Jessee C. C. Kim T. Melfi M. J. Pischke C. E. Sainz W. J. Sperko M. J. Stanko P. L. Sturgill R. R. Young V. G. V. Giunto, Delegate Subgroup on Performance Qualification (BPV IX) D. A. Bowers, Chair M. J. Rice, Secretary M. A. Boring R. B. Corbit P. D. Flenner K. L. Hayes J. S. Lee W. M. Lundy T. Melfi E. G. Reichelt M. B. Sims xxix G. A. Lofthus E. J. Maloney J. E. O’Sullivan R. K. Rhyne D. A. Scarth F. J. Schaaf, Jr. J. C. Spanner, Jr. G. L. Stevens D. E. Waskey J. G. Weicks T. Yuhara H. D. Chung, Delegate C. Ye, Delegate B. R. Newton, Contributing Member R. A. West, Contributing Member J. Hakii, Alternate J. T. Lindberg, Alternate C. J. Wirtz, Alternate C. D. Cowfer, Honorary Member F. E. Gregor, Honorary Member O. F. Hedden, Honorary Member P. C. Riccardella, Honorary Member This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. D. Eisberg, Chair B. F. Shelley, Vice Chair P. D. Stumpf, Staff Secretary F. L. Brown J. L. Bustillos T. W. Cowley I. L. Dinovo T. J. Fowler M. R. Gorman B. Hebb D. H. Hodgkinson Subgroup on General Requirements (BPV IX) P. L. Sturgill, Chair E. W. Beckman J. P. Bell G. Chandler P. R. Evans A. Howard R. M. Jessee S. Schuessler P. L. Sturgill J. P. Swezy, Jr. M. Troughton E. W. Woelfel J. Wright J. C. Minichiello, Contributing Member C. W. Rowley, Contributing Member Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Subgroup on Plastic Fusing (BPV IX) COMMITTEE ON WELDING, BRAZING, AND FUSING (BPV IX) W. J. Sperko, Chair D. A. Bowers, Vice Chair S. J. Rossi, Staff Secretary M. Bernasek M. L. Carpenter J. G. Feldstein P. D. Flenner S. E. Gingrich R. M. Jessee J. S. Lee W. M. Lundy T. Melfi W. F. Newell, Jr. A. S. Olivares D. K. Peetz M. J. Pischke M. J. Rice No fu Working Group on Flaw Evaluation (SG-ES) (BPV XI) S. D. Kulat J. T. Lindberg W. E. Norris R. K. Rhyne J. C. Spanner, Jr. G. L. Stevens R. W. Swayne R. C. Cipolla, Chair W. H. Bamford M. L. Benson B. Bezensek H. D. Chung G. H. DeBoo C. M. Faidy B. R. Ganta R. G. Gilada H. L. Gustin F. D. Hayes P. H. Hoang K. Hojo D. N. Hopkins Y. Kim K. Koyama V. Lacroix D. R. Lee China International Working Group (BPV XI) J. H. Liu, Chair Y. Nie, Vice Chair C. Ye, Vice Chair M. W. Zhou, Secretary J. Cai D. X. Chen H. Chen H. D. Chen Y. B. Guo Y. Hou P. F. Hu D. M. Kang X. Y. Liang Z. X. Liang S. X. Lin L. Q. Liu Y. Liu W. N. Pei C. L. Peng G. X. Tang Q. Wang Q. W. Wang Z. S. Wang F. Xu Z. Y. Xu Q. Yin K. Zhang Y. Zhang Z. M. Zhong L. L. Zou Task Group on Evaluation Procedures for Degraded Buried Pipe (WG-PFE) (BPV XI) R. O. McGill, Chair S. X. Xu, Secretary G. Antaki R. C. Cipolla G. H. DeBoo K. Hasegawa K. M. Hoffman Germany International Working Group (BPV XI) T. J. Griesbach, Chair V. Marthandam, Secretary K. R. Baker W. H. Bamford H. Behnke T. L. Dickson R. L. Dyle A. E. Freed S. R. Gosselin M. Hayashi S. A. Kleinsmith H. S. Mehta A. D. Odell D. R. Lee Y. Li R. O. McGill H. S. Mehta K. Miyazaki R. Pace J. C. Poehler S. Ranganath D. A. Scarth T. V. Vo K. R. Wichman S. X. Xu D. P. Munson R. Pace P. J. Rush D. A. Scarth R. Pace N. A. Palm J. C. Poehler S. Ranganath W. L. Server D. V. Sommerville C. A. Tomes A. Udyawar T. V. Vo D. P. Weakland K. E. Woods T. Hardin, Alternate Working Group on Pipe Flaw Evaluation (SG-ES) (BPV XI) D. A. Scarth, Chair G. M. Wilkowski, Secretary W. H. Bamford H. D. Chung R. C. Cipolla N. G. Cofie J. M. Davis G. H. DeBoo C. M. Faidy B. R. Ganta S. R. Gosselin L. F. Goyette C. E. Guzman-Leong K. Hasegawa P. H. Hoang K. Hojo D. N. Hopkins E. J. Houston Task Group on Evaluation of Beyond Design Basis Events (SG-ES) (BPV XI) R. Pace, Chair K. E. Woods, Secretary G. Antaki P. R. Donavin R. G. Gilada T. J. Griesbach H. L. Gustin M. Hayashi M. Moenssens Working Group on Operating Plant Criteria (SG-ES) (BPV XI) H. Schau X. Schuler J. Wendt Subgroup on Evaluation Standards (SG-ES) (BPV XI) W. H. Bamford, Chair G. L. Stevens, Secretary H. D. Chung R. C. Cipolla G. H. DeBoo R. L. Dyle B. R. Ganta T. J. Griesbach K. Hasegawa K. Hojo D. N. Hopkins K. Koyama G. A. A. Miessi K. Hojo S. A. Kleinsmith H. S. Mehta D. V. Sommerville T. V. Vo K. R. Wichman G. M. Wilkowski T. Weaver, Contributing Member xxx K. Kashima Y. Li R. O. McGill H. S. Mehta G. A. A. Miessi K. Miyazaki S. H. Pellet H. Rathbun D. L. Rudland P. J. Rush D.-J. Shim A. Udyawar T. V. Vo B. Wasiluk S. X. Xu A. Alleshwaram, Alternate M. L. Benson, Alternate This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. C. A. Spletter, Secretary H.-R. Bath B. Hoffmann U. Jendrich Y. Li H. S. Mehta G. A. A. Miessi K. Miyazaki R. K. Qashu S. Ranganath H. Rathbun P. J. Rush D. A. Scarth W. L. Server D.-J. Shim A. Udyawar T. V. Vo B. Wasiluk K. R. Wichman G. M. Wilkowski D. L. Rudland, Alternate Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Executive Committee (BPV XI) R. A. Yonekawa, Chair G. C. Park, Vice Chair R. L. Crane, Staff Secretary W. H. Bamford R. L. Dyle M. J. Ferlisi E. B. Gerlach R. E. Gimple No fu J. T. Lindberg G. A. Lofthus G. R. Perkins S. A. Sabo F. J. Schaaf, Jr. R. V. Swain C. J. Wirtz J. E. O'Sullivan, Chair S. Schuessler, Secretary M. T. Audrain J. Johnston, Jr. T. M. Musto S. Patterson B. B. Raji F. J. Schaaf, Jr. Z. J. Zhou Task Group on Repair by Carbon Fiber Composites (WGN-MRR) (BPV XI) J. E. O'Sullivan, Chair J. W. Collins M. Golliet L. S. Gordon T. Jimenez G. M. Lupia M. P. Marohl Working Group on Personnel Qualification and Surface Visual and Eddy Current Examination (SG-NDE) (BPV XI) J. T. Lindberg, Chair J. E. Aycock, Secretary S. E. Cumblidge A. Diaz N. Farenbaugh D. O. Henry J. W. Houf J. C. Spanner, Jr. J. T. Timm M. C. Weatherly M. L. Whytsell C. J. Wirtz R. P. Ojdrovic D. Peguero A. Pridmore B. B. Raji C. W. Rowley V. Roy J. Wen Working Group on Design and Programs (SG-RRA) (BPV XI) R. Clow, Chair A. B. Meichler, Secretary O. Bhatty S. B. Brown J. W. Collins L. R. Corr R. R. Croft E. V. Farrell, Jr. E. B. Gerlach Working Group on Procedure Qualification and Volumetric Examination (SG-NDE) (BPV XI) G. A. Lofthus, Chair G. R. Perkins, Secretary M. T. Anderson M. Briley C. B. Cheezem A. D. Chockie D. R. Cordes M. Dennis S. R. Doctor F. E. Dohmen K. J. Hacker D. B. King D. A. Kull C. A. Nove S. A. Sabo R. V. Swain S. J. Todd D. K. Zimmerman Subgroup on Water-Cooled Systems (SG-WCS) (BPV XI) S. L. McCracken B. R. Newton J. E. O'Sullivan S. Schuessler R. R. Stevenson R. W. Swayne D. L. Tilly D. E. Waskey J. G. Weicks R. A. Yonekawa E. G. Reichelt, Alternate M. J. Ferlisi P. J. Hennessey D. W. Lamond A. McNeill III T. Nomura G. C. Park J. E. Staffiera H. M. Stephens, Jr. R. Turner Task Group on High Strength Nickel Alloys Issues (SG-WCS) (BPV XI) R. L. Dyle, Chair B. L. Montgomery, Secretary W. H. Bamford P. R. Donavin R. E. Gimple R. Hardies K. Koyama M. Lashley H. Malikowski S. E. Marlette G. C. Park J. M. Shuping J. C. Spanner, Jr. K. B. Stuckey E. J. Sullivan, Jr. B. C. Thomas D. P. Weakland Working Group on Welding and Special Repair Processes (SG-RRA) (BPV XI) D. E. Waskey, Chair D. J. Tilly, Secretary R. E. Cantrell S. J. Findlan P. D. Fisher M. L. Hall R. A. Hermann K. J. Karwoski Working Group on Containment (SG-WCS) (BPV XI) C. C. Kim S. L. McCracken D. B. Meredith B. R. Newton J. E. O'Sullivan R. E. Smith J. G. Weicks J. E. Staffiera, Chair H. M. Stephens, Jr., Secretary P. S. Ghosal H. T. Hill R. D. Hough B. Lehman J. A. Munshi xxxi D. J. Naus A. A. Reyes-Cruz E. A. Rodriguez M. Sircar S. G. Brown, Alternate T. J. Herrity, Alternate This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. S. D. Kulat, Chair N. A. Palm, Secretary J. M. Agold V. L. Armentrout J. M. Boughman S. T. Chesworth A. D. Cinson D. D. Davis H. Q. Do E. L. Farrow Subgroup on Repair/Replacement Activities (SG-RRA) (BPV XI) E. B. Gerlach, Chair E. V. Farrell, Jr., Secretary J. F. Ball S. B. Brown R. E. Cantrell R. Clow P. D. Fisher R. E. Gimple D. R. Graham R. A. Hermann K. J. Karwoski R. D. Kerr D. R. Graham G. F. Harttraft T. E. Hiss H. Malikowski M. A. Pyne R. R. Stevenson R. W. Swayne R. A. Yonekawa Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Working Group on Nonmetals Repair/Replacement Activities (SG-RRA) (BPV XI) Subgroup on Nondestructive Examination (SG-NDE) (BPV XI) J. C. Spanner, Jr., Chair D. R. Cordes, Secretary D. Alley T. L. Chan C. B. Cheezem F. E. Dohmen D. O. Henry No fu J. M. Agold, Chair N. Granback, Secretary R. W. Blyde C. Cueto-Felgueroso R. E. Day H. Q. Do M. J. Ferlisi K. W. Hall B. R. Snyder, Chair A. B. Meichler, Secretary T. M. Anselmi S. Asada D. V. Burgess Y.-K. Chung D. D. Davis R. L. Dyle K. M. Hoffman S. D. Kulat A. Lee T. Nomura J. C. Nygaard R. Rishel G. J. Navratil, Alternate A. L. Hiser, Jr. R. E. Nickell K. Sakamoto W. L. Server R. L. Turner G. G. Young Z. Zhong M. Srinivasan, Alternate Working Group on General Requirements (BPV XI) Task Group on Optimization of Ultrasonic Evaluation Requirements (WG-ISC) (BPV XI) M. J. Ferlisi, Chair K. W. Hall D. O. Henry K. M. Hoffman R. K. Rhyne, Chair E. J. Maloney, Secretary J. F. Ball T. L. Chan E. L. Farrow B. L. Montgomery G. J. Navratil M. Orihuela J. C. Poehler P. J. Hennessey K. M. Herman R. K. Mattu C. E. Moyer R. L. Williams Special Working Group on Reliability and Integrity Management Program (BPV XI) Working Group on Pressure Testing (SG-WCS) (BPV XI) D. W. Lamond, Chair J. M. Boughman, Secretary D. Alley Y.-K. Chung J. A. Doughty F. J. Schaaf, Jr., Chair A. T. Roberts III, Secretary N. Broom S. R. Doctor J. Fletcher S. R. Gosselin N. Granback J. Grimm A. B. Hull R. E. Hall A. E. Keyser J. K. McClanahan B. L. Montgomery S. A. Norman Task Group on Buried Components Inspection and Testing (WG-PT) (BPV XI) JSME/ASME Joint Task Group for System-Based Code (SWG-RIM) (BPV XI) T. Ivy A. Lee T. Asayama, Chair K. Dozaki M. R. Graybeal M. Hayashi Y. Kamishima G. M. Lupia J. Ossmann M. A. Richter D. Smith H. Machida M. Morishita F. J. Schaaf, Jr. S. Takaya D. Watanabe COMMITTEE ON TRANSPORT TANKS (BPV XII) M. D. Rana, Chair N. J. Paulick, Vice Chair T. Schellens, Staff Secretary A. N. Antoniou P. Chilukuri W. L. Garfield G. G. Karcher M. Pitts Working Group on Risk-Informed Activities (SG-WCS) (BPV XI) M. A. Pyne, Chair S. T. Chesworth, Secretary J. M. Agold C. Cueto-Felgueroso H. Q. Do R. Fougerousse M. R. Graybeal R. Haessler J. Hakii K. W. Hall K. M. Hoffman S. D. Kulat D. W. Lamond R. K. Mattu A. McNeill III P. J. O’Regan N. A. Palm D. Vetter J. C. Younger Subgroup on Design and Materials (BPV XII) A. P. Varghese, Chair R. C. Sallash, Secretary D. K. Chandiramani P. Chilukuri G. G. Karcher S. L. McWilliams N. J. Paulick M. D. Rana Special Working Group on Editing and Review (BPV XI) R. W. Swayne, Chair C. E. Moyer K. R. Rao T. A. Rogers S. Staniszewski A. P. Varghese M. R. Ward J. A. Byers, Contributing Member R. Meyers, Contributing Member M. D. Pham, Contributing Member A. Selz, Contributing Member J. E. Staffiera D. J. Tilly C. J. Wirtz xxxii T. A. Rogers A. Selz M. R. Ward K. Xu J. Zheng, Corresponding Member T. Hitchcock, Contributing Member M. D. Pham, Contributing Member This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. D. W. Lamond, Chair J. M. Boughman, Secretary M. Moenssens, Secretary C. Blackwelder G. C. Coker R. E. Day R. Hardies D. M. Jones A. L. Krinzman D. R. Lee R. K. Miller M. N. Mitchell R. Morrill T. Roney R. W. Swayne S. Takaya Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Special Working Group on Nuclear Plant Aging Management (BPV XI) Working Group on Inspection of Systems and Components (SG-WCS) (BPV XI) No fu M. Pitts, Chair P. Chilukuri, Secretary W. L. Garfield D. Hayworth K. Mansker G. McRae O. Mulet T. A. Rogers M. Rudek R. C. Sallash S. Staniszewski S. E. Benet, Contributing Member J. A. Byers, Contributing Member A. S. Olivares, Contributing Member L. H. Strouse, Contributing Member S. V. Voorhees, Contributing Member Subgroup on General Requirements (BPV XII) S. Staniszewski, Chair A. N. Antoniou J. L. Freiler W. L. Garfield O. Mulet B. Pittel S. Yang S. F. Harrison, Contributing Member S. Andrews, Alternate V. Bogosian, Alternate P. J. Coco, Alternate P. D. Edwards, Alternate D. P. Gobbi, Alternate K. M. Hottle, Alternate K. A. Kavanagh, Alternate B. G. Kovarik, Alternate M. A. Martin, Alternate M. Paris, Alternate A. Torosyan, Alternate E. A. Whittle, Alternate H. L. Wiger, Alternate M. Pitts T. Rummel Subcommittee on Safety Valve Requirements (SC-SVR) R. C. Sallash K. L. Gilmore, Contributing Member L. H. Strouse, Contributing Member Subgroup on Nonmandatory Appendices (BPV XII) M. R. Ward S. E. Benet, Contributing Member D. D. Brusewitz, Contributing Member J. L. Conley, Contributing Member T. Eubanks, Contributing Member T. Hitchcock, Contributing Member A. Selz, Contributing Member A. P. Varghese, Contributing Member D. B. DeMichael, Chair J. F. Ball, Vice Chair C. E. O’Brien, Staff Secretary J. Burgess S. Cammeresi J. A. Cox R. J. Doelling J. P. Glaspie S. F. Harrison, Jr. W. F. Hart D. Miller B. K. Nutter T. Patel Z. Wang J. A. West R. D. Danzy, Contributing Member Subgroup on Design (SC-SVR) D. Miller, Chair C. E. Beair J. A. Conley R. J. Doelling T. Patel J. A. West R. D. Danzy, Contributing Member Subgroup on General Requirements (SC-SVR) S. T. French J. P. Glaspie B. Pittel D. E. Tuttle J. F. Ball, Chair G. Brazier J. Burgess D. B. DeMichael COMMITTEE ON BOILER AND PRESSURE VESSEL CONFORMITY ASSESSMENT (CBPVCA) P. D. Edwards, Chair L. E. McDonald, Vice Chair K. I. Baron, Staff Secretary M. Vazquez, Staff Secretary S. W. Cameron J. P. Chicoine D. C. Cook M. A. DeVries T. E. Hansen K. T. Lau D. Miller B. R. Morelock J. D. O'Leary G. Scribner B. C. Turczynski D. E. Tuttle E. A. Whittle R. V. Wielgoszinski P. Williams D. Cheetham, Contributing Member V. Bogosian, Alternate J. B. Carr, Alternate J. W. Dickson, Alternate M. B. Doherty, Alternate J. M. Downs, Alternate B. J. Hackett, Alternate B. L. Krasiun, Alternate P. F. Martin, Alternate K. McPhie, Alternate M. R. Minick, Alternate I. Powell, Alternate R. Pulliam, Alternate R. Rockwood, Alternate R. D. Troutt, Alternate R. Uebel, Alternate J. A. West, Alternate D. A. Wright, Alternate A. J. Spencer, Honorary Member Subgroup on Testing (SC-SVR) J. A. Cox, Chair T. Beirne J. E. Britt S. Cammeresi J. W. Dickson G. D. Goodson W. F. Hart B. K. Nutter C. Sharpe Z. Wang A. Wilson U.S. Technical Advisory Group ISO/TC 185 Safety Relief Valves T. J. Bevilacqua, Chair C. E. O’Brien, Staff Secretary J. F. Ball G. Brazier xxxiii D. B. DeMichael D. Miller B. K. Nutter J. A. West This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. N. J. Paulick, Chair S. Staniszewski, Secretary P. Chilukuri D. Hayworth K. Mansker S. L. McWilliams M. Pitts T. A. Rogers R. C. Sallash D. G. Shelton R. R. Stevenson, Chair J. DeKleine, Vice Chair E. Suarez, Staff Secretary G. Gobbi S. M. Goodwin J. W. Highlands K. A. Huber J. C. Krane M. A. Lockwood R. P. McIntyre M. R. Minick L. M. Plante H. B. Prasse T. E. Quaka C. T. Smith D. M. Vickery C. S. Withers Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). COMMITTEE ON NUCLEAR CERTIFICATION (CNC) Subgroup on Fabrication, Inspection, and Continued Service (BPV XII) No fu After publication of the 2015 Edition, Errata to the BPV Code may be posted on the ASME Web site to provide corrections to incorrectly published items, or to correct typographical or grammatical errors in the BPV Code. Such Errata shall be used on the date posted. Information regarding Special Notices and Errata is published by ASME at http://go.asme.org/BPVCerrata. Changes given below are identified on the pages by a margin note, (15), placed next to the affected area. The Record Numbers listed below are explained in more detail in “List of Changes in Record Number Order” following this Summary of Changes. Page Location Change (Record Number) List of Sections Revised xii Foreword (1) Revised (2) New footnote added by errata (13-860) xv Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees In last line of 6(a), URL revised xvii Personnel Updated 3 3.1 Revised (13–1919, 14–1425) 3 3.3 Revised (13–1919, 14–1425) 18–21 Table 1A, Lines 13 & 16 For Sections I and VIII, Division 1, Carbon steel SA/EN 10222-2 P280GH added (13-1839) 22–25 Table 1A, Line 23 For VIII-1, for SA-841 A, Size/Thickness revised (13-833) Table 1A, Lines 24, 25 & 31 For I and VIII-1, SA/EN 10222-2 P305GH added (13-1839) 26–29 Table 1A, Line 14 For VIII-1, for SA-841 B, Size/Thickness revised (13-833) 34–37 Table 1A, Lines 20, 24, 26, 28 & 30 For I and VIII-1, 1Cr– 1/2 Mo SA/EN 10222-2 13CrMo4-5 added (13-1839) 38–41 Table 1A, Lines 32 & 45 For I and VIII-1, 21/4Cr–1Mo SA/EN 10222-2 11CrMo9-10 added (13-1839) 98–101 Table 1A, Lines 2 & 3 For I, 18Cr–9Ni–3Cu–Cb–N SA-213 S30432 added (13-118) 122–125 Table 1A, Line 15 For Sections III, VIII-1, and XII, for 20Cr–18Ni–6Mo SA-249 S31254, Size/Thickness added and Min. Tensile Strength, Min. Yield Strength, and stress values revised (07-667) Table 1A, Line 16 For VIII-1 and XII, for SA-249 S31254, Size/Thickness added and Min. Tensile Strength, Min. Yield Strength, and stress values revised (07-667) Table 1A, Line 17 For III and VIII-1, for SA-312 S31254, Size/Thickness added and Min. Tensile Strength, Min. Yield Strength, and stress values revised (07-667) xxxiv This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. x Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). SUMMARY OF CHANGES No fu Location Change (Record Number) For VIII-1, for SA-312 S31254, Size/Thickness added and Min. Tensile Strength, Min. Yield Strength, and stress values revised (07-667) Table 1A, Line 19 For III and VIII-1, for SA-312 S31254, Size/Thickness added and Min. Tensile Strength, Min. Yield Strength, and stress values revised (07-667) Table 1A, Line 20 For VIII-1, for SA-312 S31254, Size/Thickness added and Min. Tensile Strength, Min. Yield Strength, and stress values revised (07-667) Table 1A, Line 21 For III, VIII-1, and XII, SA-249 S31254 added (07-667) Table 1A, Line 22 For VIII-1 and XII, SA-249 S31254 added (07-667) Table 1A, Line 23 For III and VIII-1, SA-312 S31254 added (07-667) Table 1A, Line 24 For VIII-1, SA-312 S31254 added (07-667) Table 1A, Line 25 For III and VIII-1, SA-312 S31254 added (07-667) Table 1A, Line 26 For VIII-1, SA-312 S31254 added (07-667) Table 1A, Lines 29–31 For VIII-1, 21Cr–5Mn–1.5Ni–Cu–N SA-240 and SA-479 S32101 added (07-778) 138–141 Table 1A, Line 12 For VIII-1, 25Cr–7.5Ni–3.5Mo–N–Cu–W SA-995 CD3MWCuN added (14-48) 150 Table 1A (1) General Note (a) revised (13-1839) (2) General Note (f) revised (13-118) 151 Table 1A (1) Note S10 revised editorially (2) Note T12 added (13-118) 154–157 Table 1B, Line 26 For III, VIII-1, and XII, for Alclad 6061 T4 SB-209, Size/Thickness and stress values revised (13-1910) Table 1B, Lines 27 & 28 For III, VIII-1, and XII, for T451 SB-209, stress values revised (13-1910) Table 1B, Line 29 For III, VIII-1, and XII, for T4 wld. SB-209, Size/Thickness and stress values revised (13-1910) Table 1B, Line 30 For III, VIII-1, and XII, for T451 wld. SB-209, stress values revised (13-1910) Table 1B, Line 31 For III, VIII-1, and XII, for T6 SB-209, Size/Thickness and stress value for 250°F revised (13-1910) Table 1B, Line 32 For III, VIII-1, and XII, for T651 SB-209, stress value for 250°F revised (13-1910) Table 1B, Lines 33 & 34 For III, VIII-1, and XII, for T651 SB-209, stress values revised (13-1910) Table 1B, Line 35 For III, VIII-1, and XII, for T6 wld. SB-209, Size/Thickness and stress values revised (13-1910) Table 1B, Line 36 For III, VIII-1, and XII, for T651 wld. SB-209, stress values revised (13-1910) Table 1B, Line 20 For III, VIII-1, and XII, for A95052 O SB-209, Size/Thickness revised (14-1425) 162–165 xxxv This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Table 1A, Line 18 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Page No fu 166–169 170–173 Change (Record Number) Table 1B, Line 21 For III, VIII-1, and XII, for H112 SB-209, stress value at 250°F revised (14-1425) Table 1B, Lines 23 & 24 For III, VIII-1, and XII, for H32 and H34 SB-209, Size/Thickness and stress value at 250°F revised (14-1425) Table 1B, Lines 25–27 For III, VIII-1, and XII, for O, H32, and H34 SB-210, Size/Thickness and stress value at 250°F revised (14-1425) Table 1B, Lines 28–30 For III, VIII-1, and XII, for H32 and H34 SB-234, and O SB-241, stress value at 250°F revised (14-1425) Table 1B, Line 10 For III, VIII-1, and XII, for A95086 O SB-209, Size/Thickness revised (14-1425) Table 1B, Lines 18–20 For III, VIII-1, and XII, for O, H111, and H112 SB-241, Size/Thickness deleted (14-1425) Table 1B, Line 30 For III, VIII-1, and XII, for A96061 T4 SB-209, Size/Thickness and stress value at 250°F revised (13-1910) Table 1B, Line 31 For III, VIII-1, and XII, for T451 SB-209, stress value at 250°F revised (13-1910) Table 1B, Line 32 For III, VIII-1, and XII, for T6 SB-209, Size/Thickness and stress value at 250°F revised (13-1910) Table 1B, Lines 33 & 34 For III, VIII-1, and XII, for T651 SB-209, stress value at 250°F revised (13-1910) Table 1B, Line 35 For III, VIII-1, and XII, for T4 wld. SB-209, Size/Thickness and stress values revised (13-1910) Table 1B, Line 36 For VIII-1 and XII, for T451 wld. SB-209, stress values revised (13-1910) Table 1B, Line 37 For III, VIII-1, and XII, for T6 wld. SB-209, Size/Thickness and stress values revised (13-1910) Table 1B, Line 38 For VIII-1 and XII, for T651 wld. SB-209, stress values revised (13-1910) Table 1B, Lines 39 & 40 For III, VIII-1, and XII, for T4 and T6 SB-210, stress value at 250°F revised (13-1910) Table 1B, Lines 41 & 42 For III, VIII-1, and XII, for T4 wld. and T6 wld. SB-210, stress values revised (13-1910) Table 1B, Lines 1 & 2 For III, VIII-1, and XII, for T6 and T651 SB-211, stress value at 250°F revised (13-1910) Table 1B, Lines 3 & 4 For III, VIII-1, and XII, for T6 wld. and T651 wld. SB-211, stress values revised (13-1910) Table 1B, Line 5 For III, VIII-1, and XII, for T4 SB-221, stress values revised (13-1910) Table 1B, Line 6 For III, VIII-1, and XII, for T6 SB-221, stress value at 250°F revised (13-1910) Table 1B, Lines 7 & 8 For III, VIII-1, and XII, for T4 wld. and T6 wld. SB-221, stress values revised (13-1910) Table 1B, Lines 9 & 10 For III, VIII-1, and XII, for T4 and T6 SB-234, stress value at 250°F revised (13-1910) xxxvi This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 174–177 Location Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Page No fu 178–181 186–189 Change (Record Number) Table 1B, Lines 11 & 12 For III, VIII-1, and XII, for T4 wld. and T6 wld. SB-234, stress values revised (13-1910) Table 1B, Line 13 For III, VIII-1, and XII, for T4 SB-241, stress values revised (13-1910) Table 1B, Line 14 For III, VIII-1, and XII, for T6 SB-241, stress value at 250°F revised (13-1910) Table 1B, Lines 15 & 16 For III, VIII-1, and XII, for T4 wld. and T6 wld. SB-241, stress values revised (13-1910) Table 1B, Line 17 For III, VIII-1, and XII, for T6 drawn SB-241, Class/Condition/ Temper and stress value at 250°F revised (13-1910) Table 1B, Line 18 For III, VIII-1, and XII, for T6 SB-241, stress value at 250°F revised (13-1910) Table 1B, Line 19 For III, VIII-1, and XII, for T6 wld. SB-241, stress values revised (13-1910) Table 1B, Lines 20–22 For III, VIII-1, and XII, for T6 SB-247, stress value at 250°F revised (13-1910) Table 1B, Line 23 For III, VIII-1, and XII, for T6 wld. SB-247, stress values revised (13-1910) Table 1B, Line 24 For III, VIII-1, and XII, for T6 SB-308, stress value at 250°F revised (13-1910) Table 1B, Line 25 For III, VIII-1, and XII, for T6 wld. SB-308, stress values revised (13-1910) Table 1B, Lines 4–8 For III, VIII-1, and XII, for C10200 H00 through H04 SB-152, Notes revised (14-1007) Table 1B, Lines 17–21 For III, VIII-1, and XII, for C10400 H00 through H04 SB-152, Notes revised (14-1007) Table 1B, Lines 23–27 For III, VIII-1, and XII, for C10500 H00 through H04 SB-152, Notes revised (14-1007) Table 1B, Line 29–33 For III, VIII-1, and XII, for C10700 H00 through H04 SB-152, Notes revised (14-1007) Table 1B, Line 35 For III, VIII-1, and XII, for C11000 H04 SB-187, Notes revised (14-1007) Table 1B, Lines 37–41 For VIII-1 and XII, for H00 through H04 SB-152, Notes revised (14-1007) Table 1B, Lines 13–17 For III, VIII-1, and XII, for C12200 H00 through H04 SB-152, Notes revised (14-1007) Table 1B, Lines 28–32 For III, VIII-1, and XII, for C12300 H00 through H04 SB-152, Notes revised (14-1007) Table 1B, Line 40 For VIII-1 and XII, for C19400 WO61 SB-543, Notes revised (13-986) Table 1B, Line 41 For III, VIII-1, and XII, for WC55 SB-543, Notes revised (13-986) Table 1B, Line 42 For I, III, VIII-1, and XII, for C23000 H58 SB-43, Notes revised (14-1007) Table 1B, Line 5 For III, VIII-1, and XII, for WC55 SB-543, Notes revised (14-1007) Table 1B, Lines 16 & 20 For VIII-1 and XII, C37700 TQ50 SB-283 deleted (14-1188) xxxvii This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 182–185 Location Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Page No fu 190–193 Location Change (Record Number) For VIII-1 and XII, for C64200 M10, M11, and O20 SB-283, Notes revised (13-986) Table 1B, Line 23 For VIII-1 and XII, TQ50 SB-283 deleted (14-1188) Table 1B, Lines 24–26 For VIII-1 and XII, for M10, M11, and O20 SB-283, Notes revised (13-986) Table 1B, Line 27 For VIII-1 and XII, TQ50 SB-283 deleted (14-1188) Table 1B, Line 28 For III, VIII-1, and XII, for C65100 O60 SB-98, Notes and stress values revised (13-987) Table 1B, Line 29 For III, VIII-1, and XII, for H02 SB-98, stress values revised (13-987) Table 1B, Line 30 For III, VIII-1, and XII, for C65500 O61 SB-315, Notes and stress values revised (13-987) Table 1B, Line 31 For III, VIII-1, and XII, for O61 SB-98, stress values revised (13-987) Table 1B, Line 32 For III, VIII-1, and XII, for O60 SB-98, Notes and stress values revised (13-987) Table 1B, Line 33 For III, VIII-1, and XII, for H02 SB-98, Notes and stress value at 350°F revised (13-987) Table 1B, Line 34 For III, VIII-1, and XII, for C66100 O60 SB-98, Notes revised (13-987) Table 1B, Line 35 For III, VIII-1, and XII, for H02 SB-98, stress value at 350°F revised (13-987) Table 1B, Lines 36 & 37 For III, VIII-1, and XII, for C68700 O61 SB-111 and SB-395, Notes added (13-986) Table 1B, Line 38 For VIII-1 and XII, for WO61 SB-543, Notes revised (13-986) Table 1B, Lines 11 & 12 For III, VIII-1, and XII, for C70600 WO61 SB-467 and SB-543, Notes revised (13-986) Table 1B, Line 13 For VIII-1, for WO61 SB-956, Notes revised (13-986) Table 1B, Line 14 For VIII-1 and XII, for WM50 SB-467, Notes revised (13-986) Table 1B, Line 15 For III, VIII-1, and XII, for H55 SB-111, Notes revised (14-1007) Table 1B, Line 16 For VIII-1, for H55 SB-466, Notes revised (14-1007) Table 1B, Line 17 For III, VIII-1, and XII, for WC55 SB-543, Notes revised (14-1007) Table 1B, Line 18 For VIII-1, for WC55 SB-956, Notes revised (14-1007) Table 1B, Line 19 For VIII-1 and XII, for Wld. fr. cold rld. strip SB-467, Notes revised (13-986) 202–205 Table 1B, Lines 42–45 For I and VIII-1, N06025 Annealed SB-163 and SB-168 added (11-772) 206–209 Table 1B, Lines 1–10 For I and VIII-1, Annealed SB-366, SB-462, SB-516, SB-517, and SB-564 added (11-772) Table 1B, Lines 11–14 For I and VIII-1, HW or CW ann. SB-166 and SB-167 added (11-772) Table 1B, Line 24 For III, VIII-1, and XII, N08904 Annealed SA-182 added (13-1363) Table 1B, Line 25 For III, VIII-1, and XII, Annealed SB-625 replaced by SA-240 (13-1363) Table 1B, Line 26 For III, VIII-1, and XII, Annealed SB-312 added (13-1363) 194–197 242–245 xxxviii This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Table 1B, Lines 20–22 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Page No fu Location Change (Record Number) For III, VIII-1, and XII, Annealed SB-673 replaced by SA-312 (13-1363) Table 1B, Line 28 For III, VIII-1, and XII, Annealed SB-366 replaced by SA-403 (13-1363) Table 1B, Line 31 For III, VIII-1, and XII, for Annealed SB-677, Product Form revised (13-1363) 274 Table 1B General Note (a) revised (11-772) 275 Table 1B (1) Notes G30, G31, and G32 added (11-772) (2) Note G33 added (14-1007) 340–342 Table 2B, Lines 13–15 N06690 Hot worked/ann. and Cold worked/ann. SB-167 added (11-296) Table 2B, Line 20 For Cold worked/ann. SB-167, Class/Condition/Temper revised (11-296) Table 3, Line 1 For III; VIII-1; Section VIII, Division 2; and XII, for C65100 O60 SB-98, stress values revised (13-987) Table 3, Line 4 For III, VIII-1, VIII-2, and XII, for H06 SB-98, stress values revised (13-987) Table 3, Line 5 For III, VIII-1, VIII-2, and XII, for C65500 O60 SB-98, stress values revised (14-442) Table 3, Line 6 For III and VIII-2, for H01 SB-98, stress values revised (13-987) Table 3, Line 7 For III and VIII-2, for H02 SB-98, stress values revised (14-442) Table 3, Line 8 For III, VIII-1, VIII-2, and XII, for C66100 O60 SB-98, stress values revised (13-987) Table 3, Line 9 For III and VIII-2, for H01 SB-98, stress values revised (13-987) Table 3, Line 10 For III and VIII-2, for H02 SB-98, stress values revised (14-442) Table 4, Lines 15 & 17 For III and VIII-2, for 16Cr–12Ni–2Mo SA-193 B8M and 16Cr–12Ni– 2Mo–N SA-193 B8MNA, stress values revised (11-2203) Table 4, Lines 18 & 20 For III and VIII-2, for 18Cr–8Ni SA-193 B8 and 18Cr–8Ni–N SA-193 B8NA, stress values revised (11-2203) Table 4, Lines 21–24 For III and VIII-2, for 18Cr–8Ni–4Si–N SA-193 B8S and B8SA, 18Cr– 10Ni–Cb SA-193 B8C, and 18Cr–10Ni–Ti SA-193 B8T, stress values revised (11-2203) Table 4, Lines 1–3 For III and VIII-2, for N04400 Annealed and Hot worked SB-164, stress values revised (11-2203) Table 4, Lines 9 & 10 For III and VIII-2, for N04405 Annealed and Hot worked SB-164, stress values revised (11-2203) Table 4, Line 12 For III and VIII-2, for N07718 Sol. & precip. harden SB-637, Class/ Condition/Temper revised (11-2203) 385 Table 4 General Note (c) revised (11-2203) 386–445 Table 5A Title corrected by errata to read S (13-1287) 386–389 Table 5A, Lines 39 & 40 Carbon steel SA/EN 10222-2 P280GH added (13-1839) 390–393 Table 5A, Line 20 For SA-841 A, Size/Thickness revised (13-833) 364–367 378–380 382–384 xxxix This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Table 1B, Line 27 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Page No fu Location Change (Record Number) SA/EN 10222-2 P305GH added (13-1839) Table 5A, Line 43 For SA-841 B, Size/Thickness revised (13-833) Table 5A, Lines 1 & 4 1Cr–1/2Mo SA/EN 10222-2 13CrMo4-5 added (13-1839) Table 5A, Lines 6–8 SA/EN 10222-2 13CrMo4-5 added (13-1839) Table 5A, Line 41 21/4Cr–1Mo SA/EN 10222-2 11CrMo9-10 added (13-1839) 402–405 Table 5A, Line 6 SA/EN 10222-2 11CrMo9-10 added (13-1839) 406–409 Table 5A, Line 11 9Cr–1Mo–V SA-336 F91 added (14-846) 442–445 Table 5A, Lines 24–30 29Cr–6.5Ni–2Mo–N SA-240, SA-479, SA-789, and SA-790 S32906 added (09-94) 446 Table 5A (1) General Note (a) revised (13-1839) (2) Notes G11, G12, and H6 revised (13-2174) 452–471 Table 5B Title corrected by errata to read S (13-1287) 452–455 Table 5B, Line 29 For C65500 O61 SB-96, stress values revised (13-987) 478, 479 Table U, Line 28 Carbon steel SA/EN 10222-2 P280GH added (13-1839) 480, 481 Table U, Line 33 For SA-841 A, Size/Thickness revised (13-833) Table U, Lines 34 & 39 SA/EN 10222-2 P305GH added (13-1839) 482, 483 Table U, Line 23 For SA-841 B, Size/Thickness revised (13-833) 486, 487 Table U, Lines 40 & 46 1Cr–1/2Mo SA/EN 10222-2 13CrMo4-5 added (13-1839) 490, 491 Table U, Lines 7 & 19 21/4Cr–1Mo SA/EN 10222-2 11CrMo9-10 added (13-1839) 512, 513 Table U, Line 37 18Cr–9Ni–3Cu–Cb–N SA-213 S30432 added (13-118) 520, 521 Table U, Lines 13 & 14 For 20Cr–18Ni–6Mo SA-249 and SA-312 S31254, Size/Thickness added, and Min. Tensile Strength and tensile strength values revised (07-667) Table U, Lines 15 & 16 SA-249 and SA-312 S31254 added (07-667) Table U, Lines 18–20 21Cr–5Mn–1.5Ni–Cu–N SA-240 and SA-479 S32101 added (07-778) 524, 525 Table U, Line 27 25Cr–7.5Ni–3.5Mo–N–Cu–W SA-995 CD3MWCuN added (14-48) 528, 529 Table U, Lines 1–11 Alclad 6061 SB-209 added (13-1910) Table U, Lines 12–22 A95052 SB-209, SB-210, SB-234, and SB-241 added (14-1425) Table U, Lines 23–43 A95083 SB-209, SB-221, SB-241, SB-247, and SB-928 added (14-1425) Table U, Lines 1–11 A95086 SB-209, SB-221, SB-241, and SB-928 added (14-1425) Table U, Lines 12–43 A96061 SB-209, SB-210, SB-211, SB-221, SB-234, and SB-241 added (13-1910) 532, 533 Table U, Lines 1–6 A96061 SB-247 and SB-308 added (13-1910) 536, 537 Table U, Lines 11–14 C65100 O60, H02, and H06 SB-98 added (13-987) Table U, Line 15 For C65500 O61 SB-96, tensile strength values revised (13-987) Table U, Lines 16–19 O61 SB-315 and O60, H01, and H02 SB-98 added (13-987) Table U, Lines 20–22 C66100 O60, H01, and H02 SB-98 added (13-987) 398–401 530, 531 xl This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Table 5A, Lines 21, 22 & 24 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Page No fu 540, 541 Location Change (Record Number) N06025 Annealed SB-163, SB-168, SB-366, SB-462, SB-516, SB-517, and SB-564 added (11-772) Table U, Lines 24 & 25 HW or CW ann. SB-166 and SB-167 added (11-772) Table U, Line 40 N06690 Hot worked/ann. SB-167 added (11-296) Table U, Line 45 For Cold worked/ann. SB-167, Class/Condition/Temper and tensile strength values revised (11-296) Table U, Line 46 Hot worked/ann. SB-167 added (11-296) Table U, Line 12 N08904 Annealed SA-182 added (13-1363) Table U, Line 13 Annealed SB-625 replaced by SA-240 (13-1363) Table U, Line 14 Annealed SB-673 replaced by SA-312 and Product Form revised (13-1363) Table U, Line 15 Annealed SB-366 replaced by SA-403 (13-1363) Table U, Line 18 For Annealed SB-677, Product Form revised (13-1363) 558 Table U General Note (a) revised (11-772, 13-1839) 574–577 Table Y-1, Lines 1 & 5 Carbon steel SA/EN 10222-2 P280GH added (13-1839) 578–581 Table Y-1, Line 14 For SA-841 A, Size/Thickness revised (13-833) Table Y-1, Lines 15, 16 & 22 SA/EN 10222-2 P305GH added (13-1839) 582–585 Table Y-1, Line 6 For SA-841 B, Size/Thickness revised (13-833) 590–593 Table Y-1, Lines 42 & 46 1Cr–1/2Mo SA/EN 10222-2 13CrMo4-5 added (13-1839) 594–597 Table Y-1, Lines 1, 3 & 5 SA/EN 10222-2 13CrMo4-5 added (13-1839) Table Y-1, Lines 23–28 1Cr–1Mn–1/4Mo SA-540 B22 added (13-528) 598–601 Table Y-1, Lines 17 & 32 21/4Cr–1Mo SA/EN 10222-2 11CrMo9-10 added (13-1839) 606–609 Table Y-1, Lines 20 & 21 12Cr–1Mo–V–W SA-437 B4C and B4B added (13-528) 638–641 Table Y-1, Line 29 For 16Cr–12Ni–2Mo–N SA-193 B8MNA, yield strength values revised (13-528) 654–657 Table Y-1, Line 20 18Cr–9Ni–3Cu–Cb–N SA-213 S30432 added (13-118) 670–673 Table Y-1, Lines 13 & 14 For 20Cr–18Ni–6Mo SA-249 and SA-312 S31254, Size/Thickness added and Min. Tensile Strength, Min. Yield Strength, and yield strengths revised (07-667) Table Y-1, Lines 15 & 16 SA-249 and SA-312 S31254 added (07-667) Table Y-1, Lines 18–20 21Cr–5Mn–1.5Ni–Cu–N SA-240 and SA-479 S32101 added (07-778) 678–681 Table Y-1, Line 27 25Cr–7.5Ni–3.5Mo–N–Cu–W SA-995 CD3MWCuN added (14-48) 686–689 Table Y-1, Lines 3–9 Alclad 6061 SB-209 added (13-1910) Table Y-1, Line 23 For A95052 O SB-209, Size/Thickness revised, Min. Tensile Strength added, and yield strength values revised (14-1425) Table Y-1, Lines 24 & 25 For H112 SB-209, Min. Tensile Strength added and yield strength values revised (14-1425) Table Y-1, Lines 26–33 H32 and H34 SB-209; O, H32, and H34 SB-210; H32 and H34 SB-234; and O SB-241 added (14-1425) 544, 545 550, 551 xli This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Table U, Lines 17–23 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Page No fu 690–693 Change (Record Number) Table Y-1, Line 39 For A95083 H112 SB-209, Min. Tensile Strength added (14-1425) Table Y-1, Lines 41–43 H32 SB-209 and O SB-221 added (14-1425) Table Y-1, Line 44 For H111 SB-221, Min. Tensile Strength added (14-1425) Table Y-1, Lines 45 & 46 H112 SB-221 and O SB-241 added (14-1425) Table Y-1, Line 47 For H111 SB-241, Size/Thickness deleted (14-1425) Table Y-1, Line 48 H112 SB-241 added (14-1425) Table Y-1, Lines 1–4 H111 SB-247, H112 SB-247, and H321 SB-928 added (14-1425) Table Y-1, Lines 5 & 6 For A95086 O and H112 SB-209, Size/Thickness revised, Min. Tensile Strength added, and yield strength for 150°F revised (14-1425) Table Y-1, Line 7 For H112 SB-209, Min. Tensile Strength added and yield strength for 150°F revised (14-1425) Table Y-1, Line 8 For H112 SB-209, Size/Thickness revised, Min. Tensile Strength added, and yield strength for 150°F revised (14-1425) Table Y-1, Lines 9–16 H112, H32, and H34 SB-209; H112 SB-221; O, H111, and H112 SB-241; and H116 SB-928 added (14-1425) Table Y-1, Line 24 For A96061 T4 SB-209, Size/Thickness revised, Min. Tensile Strength added, and yield strength values revised (13-1910) Table Y-1, Line 25 For T451 SB-209, Min. Tensile Strength added and yield strength values revised (13-1910) Table Y-1, Lines 26 & 27 For T6 and T651 SB-209, Size/Thickness revised, Min. Tensile Strength added, and yield strength values revised (13-1910) Table Y-1, Line 28 T651 SB-209 added (13-1910) Table Y-1, Lines 29 & 30 For T4 and T6 SB-210, Min. Tensile Strength added and yield strength values revised (13-1910) Table Y-1, Lines 31 & 32 For T6 and T651 SB-211, Product Form revised (13-1910) Table Y-1, Lines 33 & 34 For T4 and T6 SB-221, Min. Tensile Strength added and yield strength values revised (13-1910) Table Y-1, Lines 35 & 36 T4 and T6 SB-234 added (13-1910) Table Y-1, Line 37 For T4 SB-241, yield strength values revised (13-1910) Table Y-1, Line 38 For T6 SB-241, Product Form and yield strength values revised (13-1910) Table Y-1, Lines 39–43 T6 drawn SB-241, T6 SB-241, and T6 SB-247 added (13-1910) Table Y-1, Line 44 For T6 SB-308, Product Form revised, Min. Tensile Strength added, and yield strength values revised (13-1910) Table Y-1, Lines 21–25 C65100 O60, H02, and H06 SB-98 added (13-987) Table Y-1, Line 26 C65500 O61 SB-315 added (13-987) Table Y-1, Line 27 For O61 SB-96, yield strength values revised (13-987) Table Y-1, Line 28 For O60 SB-98, Product Form and yield strength values revised (13-987) Table Y-1, Line 29 For H01 SB-98, yield strength values revised (13-987) xlii This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 702–705 Location Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Page No fu Location Change (Record Number) For H02 SB-98, Product Form and yield strength values revised (13-987) Table Y-1, Lines 31–33 C66100 O60, H01, and H02 SB-98 added (13-987) Table Y-1, Lines 25–31 N06025 Annealed SB-163, SB-168, SB-366, SB-462, SB-516, SB-517, and SB-564 added (11-772) Table Y-1, Lines 32 & 33 HW or CW ann. SB-166 and SB-167 added (11-772) Table Y-1, Lines 7–9 N06690 Hot worked/ann. and Cold worked/ann. SB-167 added (11-296) Table Y-1, Line 15 For Cold worked/ann. SB-167, Class/Condition/Temper revised, Size/Thickness added, and yield strength values revised (11-296) Table Y-1, Line 23 N08904 Annealed SA-182 added (13-1363) Table Y-1, Line 24 Annealed SB-625 replaced by SA-240 (13-1363) Table Y-1, Line 25 Annealed SB-673 replaced by SA-312 and Product Form revised (13-1363) Table Y-1, Line 26 Annealed SB-366 replaced by SA-403 (13-1363) Table Y-1, Line 29 For Annealed SB-677, Product Form revised (13-1363) 771 Table TCD General Note (b) revised (14-1204) 922 1-100 In subparagraph (a), last paragraph revised (13-2008) 923 Table 1-100 Note (1) revised (13-2008) 924 2-100 First paragraph revised (13-2008) 924 2-110 (1) Subparagraph (d) revised (13-2008) (2) Last two paragraphs editorially revised 925 2-130 Revised in its entirety (11-2203) 925 Table 2-100(a) Note (1) revised (13-2008) 926 Table 2-100(c) Revised in its entirety (11-2203) 935 5-800 Revised (13-430, 14-145) 937 Table 5–800 Added (13-430) 936 5-900 Revised (13-430) 938 5-1400 Revised (13-430) 938 5-1500 Revised (12-1363) 940 Table 5–1500 Added (12–1363) 945 Table 10-100 First column and Note (1) revised (13-2008) 946 10-110 Subparagraphs (a)(3) and (a)(4) revised (13-2008) 710–713 722–725 730–733 NOTE: Volume 63 of the Interpretations to Section II, Part D (Customary) of the ASME Boiler and Pressure Vessel Code follows the last page of Section II, Part D (Customary). xliii This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Table Y-1, Line 30 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). Page No fu Record Number 07-667 07-778 09-94 11-296 11-772 11-2203 12-1363 13-118 13-430 13-528 13-833 13-860 13-986 13-987 13-1910 13-2008 13-2174 14-48 14-145 14-442 14-846 14-1007 14-1188 14-1204 14-1425 14-1592 Revised stress lines for SA-249 and SA-312 (UNS S31254) in Tables 1A, U, and Y-1. Added lines for SA-240 and SA-479 (UNS S32101) to Tables 1A, U, and Y-1. Added allowable stresses for UNS S32906 (29Cr-6.5Ni-2Mo-N) covered by Code Case 2295-3, but using the new criteria of the current Section VIII, Division 2, to Table 5A. Added lines for SB-167 UNS N06690 to Tables 2B, U, and Y-1. Added stress lines for SB-163, SB-166, SB-167, SB-168, SB-366, SB-462, SB-516, SB-517, and SB-564 UNS N06025 to Tables 1B, U, and Y-1 for Section I and VIII applications. Revised criteria for Appendix 2 for Table 4 and revised Table 4 values accordingly. Replaced the Weldability paragraph of Appendix 5 with new requirements. Added lines for SA-213 UNS S30432 to Tables 1A, U, and Y-1. The time-dependent properties note, T12, was created for the stresses at the temperature of 1200°F and above. Revised Appendix 5 to specify test methods and precision requirements for data required by Appendix 5. Added yield strength at temperature values to Table Y-1 for SA-437 B4B; SA-437 B4C; SA-540 B22 Classes 1, 2, 3, 4, and 5; and SA-193 Grade B8MNA Class 1A (S31651). Increased the maximum thickness of SA-841, Grade A, Class 1 and Grade B, Class 2 plates from 2 in. to 4 in. in Tables 1A, 5A, U, and Y-1. In the Foreword, the subtitle has been deleted and replaced with an ANSI disclaimer as a footnote. The T notes for all entries for copper alloys in Table 1B were reviewed. Errors that were found were corrected. Revisions were made to the stress lines for C65100, C65500, and C66100 in Tables 1B, 3, 5B, U, and Y-1. Entries for alloys and tempers that were missing from Tables U and Y-1 have been added. Note W9 was added to Table 1B for SB-98 C65500 H02. Changes of ±0.2 ksi were made to the allowable stresses below 300°F for Tables 1B, 3, and 5B. Some changes at and above 300°F provide higher allowable stresses. Errata correction to titles of Tables 5A and 5B. N08904 SB specifications were replaced with SA specifications in Table 1B. Added lines for SA/EN 10222-2 Grades P280GH, P305GH, 13CrMo4-5, and 11CrMo9-10 to Tables 1A, 5A, U, and Y-1. Conditions for SA/EN 10222-2 materials were abbreviated. In Tables 1B, U, and Y-1, provided yield and tensile stress values, and revised allowable stress values, for Grade 6061 aluminum and Alclad. Revised Appendices 1, 2, and 10 to provide a quantitative criterion for applying the 90% yield strength factor. Corrected the Section VIII-2 paragraph references in Notes G11, G12, and H6 of Table 5A. Incorporated Code Case 2244-2 for UNS J93380 for Section VIII, Division 1 applications. Changes included addition of the alloy to Tables 1A, U, and Y-1. Revised Appendix 5, paragraph 5-800 to provide different starting points for data to be provided for different classes of alloys. Changed the originally proposed Table 3 allowable stress values in 13-987 for C65500 H02 and C66100 H02 to be identical to the values for the annealed temper. Added the same maximum allowable stresses for SA-336/SA-336M F91 for Section VIII-2 use as those for SA-182/SA-182M F91 in Table 5A. Added Note G33 for certain copper alloy entries in Table 1B. Deleted SB-283 TQ50 stress lines from Table 1B. Corrected General Note (b) for Table TCD. Provided yield and tensile stress values for alloys A95052, A95083, and A95086. Grade PG305GH of SA/EN 10222-2 corrected as P305GH. xliv This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 13-1287 13-1363 13-1839 Change Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). LIST OF CHANGES IN RECORD NUMBER ORDER No fu There have been structural and stylistic changes to BPVC, starting with the 2011 Addenda, that should be noted to aid navigating the contents. The following is an overview of the changes: Subparagraph Breakdowns/Nested Lists Hierarchy • • • • • • First-level breakdowns are designated as (a), (b), (c), etc., as in the past. Second-level breakdowns are designated as (1), (2), (3), etc., as in the past. Third-level breakdowns are now designated as (-a), (-b), (-c), etc. Fourth-level breakdowns are now designated as (-1), (-2), (-3), etc. Fifth-level breakdowns are now designated as (+a), (+b), (+c), etc. Sixth-level breakdowns are now designated as (+1), (+2), etc. Footnotes With the exception of those included in the front matter (roman-numbered pages), all footnotes are treated as endnotes. The endnotes are referenced in numeric order and appear at the end of each BPVC section/subsection. Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees has been moved to the front matter. This information now appears in all Boiler Code Sections (except for Code Case books). It is our intention to establish cross-reference link functionality in the current edition and moving forward. To facilitate this, cross-reference style has changed. Cross-references within a subsection or subarticle will not include the designator/identifier of that subsection/subarticle. Examples follow: • (Sub-)Paragraph Cross-References. The cross-references to subparagraph breakdowns will follow the hierarchy of the designators under which the breakdown appears. – If subparagraph (-a) appears in X.1(c)(1) and is referenced in X.1(c)(1), it will be referenced as (-a). – If subparagraph (-a) appears in X.1(c)(1) but is referenced in X.1(c)(2), it will be referenced as (1)(-a). – If subparagraph (-a) appears in X.1(c)(1) but is referenced in X.1(e)(1), it will be referenced as (c)(1)(-a). – If subparagraph (-a) appears in X.1(c)(1) but is referenced in X.2(c)(2), it will be referenced as X.1(c)(1)(-a). • Equation Cross-References. The cross-references to equations will follow the same logic. For example, if eq. (1) appears in X.1(a)(1) but is referenced in X.1(b), it will be referenced as eq. (a)(1)(1). If eq. (1) appears in X.1(a)(1) but is referenced in a different subsection/subarticle/paragraph, it will be referenced as eq. X.1(a)(1)(1). xlv This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Cross-References Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). CROSS-REFERENCING AND STYLISTIC CHANGES IN THE BOILER AND PRESSURE VESSEL CODE No fu Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). INTENTIONALLY LEFT BLANK This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. No fu SUBPART 1 STRESS TABLES STATEMENT OF POLICY ON INFORMATION PROVIDED IN THE STRESS TABLES 1 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 2B, and 5B, the UNS number information is used as the basis of the sorting scheme for materials and is almost always mandatory. Where provided, the information in the columns for Product Form, Specification Number, Type/Grade, Class/Condition/Temper, Size/Thickness, and External Pressure Chart Number is mandatory. The information in the P‐Number and Group Number columns is also mandatory; however, the primary source for this information is Table QW/QB‐422 in Section IX. When there is a conflict between the P‐number and Group number information in these stress tables and that in Section IX, the numbers in Section IX shall govern. The information in the Minimum Tensile Strength and Minimum Yield Strength columns is nonmandatory. These values are a primary basis for establishing the allowable stresses and design stress intensities. When there is a conflict between the tensile and yield strength values in the stress tables and those in the material specifications in Section II, Parts A and B, the values in Parts A and B shall govern. The information in the Applicability and Maximum Temperature Limits columns is mandatory. Where a material is permitted for use in more than one Construction Code, and in the SI units version of these tables, the maximum use temperature limit in these columns is critical. The temperature to which allowable stress or design stress intensity values are listed is not necessarily the temperature to which use is permitted by a particular Construction Code. Different Construction Codes often have different use temperature limits for the same material and condition. Further, in the SI units version of the stress tables, values may be listed in the table at temperatures above the maximum use temperature limit. These stress values are provided to permit interpolation to be used to determine the allowable stress or design stress intensity at temperatures between the next lowest temperature for which stress values are listed and the maximum‐use temperature limit listed in these columns. The purpose of this Statement of Policy is to clarify which information in the stress tables is mandatory and which is not. The information and restrictions provided in the Notes found throughout the various stress tables provided in Subpart 1 of Section II, Part D are mandatory. It is vital to recognize that lines of information in Tables 1A, 1B, 2A, 2B, 3, 4, 5A, and 5B frequently have essential information referenced in the Notes column. These Notes are organized as follows: (a) EXX: defining onset of values based on successful experience in service (b) GXX: general requirements (c) HXX: heat treatment requirements (d) SXX: size requirements (e) TXX: defining onset of time‐dependent behavior (f) WXX: welding requirements The specifications and grades or types, coupled with the assigned Notes for each line, provide the complete description of material in the context of the allowable stresses or design stress intensities. Additional requirements for particular types of construction must also be obtained from the rules governing the construction. In Tables 1A, 2A, and 5A, the information in the Nominal Composition column is nonmandatory and is for information only. However, these nominal compositions are the primary sorting used in these three tables. See the Guideline on Locating Materials in Stress Tables, and in Tables of Mechanical and Physical Properties. The information in the Alloy Designation/UNS Number column is nonmandatory for specifications for which a grade or type is provided. This is primarily true for the non-stainless steel alloys in these tables. For specifications for which no type or grade is listed, the UNS number is mandatory. Particularly for the stainless steels, for which no type or grade is listed, the UNS number is the grade. The only difference between Tables 1A, 2A, and 5A, and Tables 1B, 2B, and 5B, with regard to the mandatory/nonmandatory nature of the information, is that in Tables 1B, Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu GUIDELINE ON LOCATING MATERIALS IN STRESS TABLES, AND IN TABLES OF MECHANICAL AND PHYSICAL PROPERTIES 1 INTRODUCTION The goal of this Guideline is to assist the users of Section II, Part D in locating materials in stress tables (Tables 1A, 1B, 2A, 2B, 3, 4, 5A, and 5B), tables of mechanical properties (Tables U, U‐2, and Y‐1), and tables of physical properties (Tables TE-1 through TE-5, TCD, TM-1 through TM-5, and PRD). This Guideline defines the logic used to place materials within these tables. 2 STRESS TABLES Stress tables are all found within Subpart 1 of Section II, Part D. Tables 1A, 1B, 3, 5A, and 5B cover allowable stresses, while Tables 2A, 2B, and 4 cover design stress intensities. Although Subpart 1 also covers ultimate tensile strength and yield strength, the organization of those mechanical property tables will be discussed separately in para. 3. A table‐by‐table listing of the materials‐ organization logic used to place materials within the designated tables follows. 2.1 TABLE 1A Table 1A provides allowable stresses for ferrous1 materials used in Section I; Section III, Division 1, Classes 2 and 3; Section VIII, Division 1; and Section XII construction. Within Table 1A, the first step in ordering materials is to use their nominal compositions. These nominal compositions are nothing more than accepted compositional fingerprints or widely recognized designators for each alloy or alloy class. These nominal compositions are arranged in Table 1A as follows: (a) carbon steels (b) carbon steels with small additions of Cb, Ti, and V (microalloyed steels) (c) C–1/2Mo steels (d) chromium steels, including ferritic stainless steels, by increasing Cr content [1/2Cr, 3/4Cr, 1Cr, 11/4Cr, 21/4Cr, 3Cr, 5Cr, 9Cr, 11Cr, 12Cr, 13Cr, 15Cr, 17Cr (including 17Cr–4Ni–4Cu and 17Cr–4Ni–6Mn), 18Cr, 26Cr, 27Cr, and 29Cr] (e) manganese steels (Mn–1/4Mo, Mn–1/2Mo, Mn–1/2Ni, and Mn–V) (f) silicon steel (11/2Si–1/2Mo) (g) nickel steels (1/2Ni, 3/4Ni, 1Ni, 11/4Ni, 2Ni, 21/2Ni, 3 2 /4Ni, 3Ni, 31/2Ni, 4Ni, 5Ni, 8Ni, and 9Ni) (h) other high nickel steels [25Ni–15Cr–2Ti (Grade 660) and 29Ni–20Cr–3Cu–2Mo (CN7M)] 2.2 TABLE 1B Table 1B provides allowable stresses for nonferrous materials used in Section I; Section III, Division 1, Classes 2 and 3; Section VIII, Division 1; and Section XII construction. Aluminum alloys (UNS AXXXXX materials) are the first materials covered in Table 1B, followed by copper alloys (UNS CXXXXX), nickel alloys (UNS NXXXXX), and the reactive and refractory metals and alloys (UNS RXXXXX). Within this latter category there are the following: (a) chromium alloys (R2XXXX) (b) cobalt alloys (R3XXXX) (c) titanium alloys (R5XXXX) (d) zirconium alloys (R6XXXX) Within each of these material class groupings, stress lines are first organized by increasing UNS (Unified Numbering System) number. The nonferrous specifications now show these numbers in association with grade designations. Then, for a given UNS number, stress lines are next ordered by strength — first tensile strength and then yield strength. Finally, for a given UNS number, tensile strength, and yield strength, stress lines are ordered by increasing specification number. Again, some materials 2 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. (i) high alloy steels, including the duplex stainless steels, in order of increasing chromium content [beginning with 16Cr–9Mn–2Ni–N, then 16Cr–12Ni–2Mo (316L), etc.], then by increasing nickel content within a given chromium or other alloy content [18Cr–8Ni, 18Cr– 8Ni–N, 18Cr–8Ni–4Si–N, 18Cr–10Ni–Cb (first S34700, then S34709, S34800, and S34809), 18Cr–10Ni–Ti, 18Cr–11Ni, etc., ending with 25Cr–22Ni–2Mo–N]. Unfortunately, most specifications for materials do not give nominal compositions — and without that information, one may not know the nominal composition for a particular material in Table 1A. If the specification number and alloy grade or type designation are known, then one can go to Table QW/QB‐422 of Section IX of the Code and find the corresponding nominal composition. Now, for a given nominal composition, Table 1A is arranged by increasing tensile strength. For a given nominal composition and tensile strength, stress listings are provided in order of increasing specification number. Sometimes, for a given nominal composition, tensile strength, yield strength, and specification number/grade or type, there may be more than one line of stresses. At this point, the Notes referenced on the second page of each page set within Table 1A will define why there are two or more lines of stresses and when each applies. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu may have two or more stress lines even if their UNS number, tensile strength, yield strength, and specification number are the same. The Notes provide direction for the applicability of each line. For those material specifications that may not show UNS numbers associated with alloy grades, one again can refer to Section IX’s Table QW/QB‐422 for that information. For Table 1B, nominal compositions are shown only for the NXXXXX and RXXXXX materials, but they have no influence on the location of alloys in the table. In this Table, the nominal compositions are simply for information. 2.7 2.3 3 Table 5A provides allowable stresses for ferrous materials for Section VIII, Division 2 construction. This Table is organized in the same manner as Table 1A. Refer back to para. 2.1 for that description. 2.8 TABLE 2A TABLE 2B 3.1 TABLE U ð15Þ TABLE 3 3.2 TABLE U-2 Table U‐2 provides ultimate tensile strengths for special ferrous materials used in Section VIII, Division 3 construction. The only material covered is wire produced to either SA-231 or SA-232, and lines are arranged in order of decreasing tensile strength, resulting from increasing wire diameter. TABLE 4 3.3 Table 4 provides design stress intensities for bolting materials used in Section III, Division 1, Classes 1, TC, and SC; and in Section VIII, Division 2 (using Part 5 and Annex 5.F of Section VIII, Division 2). Table 4 is organized in the same manner as Table 3 — first covering ferrous materials and then nonferrous materials — except that Table 4 covers far fewer materials. For the ordering logic, again refer to paras. 2.1 and 2.2 for ferrous and nonferrous materials, respectively. TABLE Y-1 Table Y‐1 provides yield strength values for ferrous and nonferrous materials, in that order. Again, the ordering of yield strength lines parallels the logic described for ferrous and nonferrous materials in paras. 2.1 and 2.2, respectively. Unlike Table U, for ferrous materials, the tensile strength level does enter into the ordering process, again following nominal composition designation. Table Y‐1’s nonferrous materials listings begin with the aluminum‐base alloys (UNS AXXXXX). These are followed 3 ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Table U provides tensile strength values for ferrous and nonferrous materials, in that order. The ordering logic for ferrous materials is the same as used in Table 1A, except yield strength level is not shown. Using the logic described in para. 2.1, stress lines are organized by nominal composition, then by increasing tensile strength level, and then by increasing specification number. Nonferrous materials coverage begins following the last of the high alloy steels (25Cr–22Ni–2Mo–N). Coverage of nonferrous alloys begins with the UNS AXXXXX alloys, followed by NXXXXX and RXXXXX alloys. The ordering of materials within these three groups has been previously described in para. 2.2. Table 3 provides allowable stresses for bolting materials for use in Section III, Division 1, Classes 2 and 3; Section VIII, Division 1; Section VIII, Division 2 (using Part 4.16 of Section VIII, Division 2); and Section XII construction. The table first covers ferrous materials and then nonferrous materials. For the ferrous materials, the ordering logic parallels that used in Tables 1A and 2A — first by nominal composition, then by increasing ultimate tensile strength, then by increasing yield strength, and finally by increasing specification number. Again, refer back to para. 2.1 for a discussion on nominal composition. Nonferrous materials are presented using the same logic as in Tables 1B and 2B; see para. 2.2 for that discussion. 2.6 MECHANICAL PROPERTY TABLES Ultimate tensile strength values and yield strength values are to be used in design calculations according to the rules of the Construction Codes. However, they are not to be construed as minimum strength values at temperature. This is explained in the General Notes to these tables. Paragraphs 3.1 through 3.3 provide a table‐by‐table listing of the materials‐organization logic. Table 2B provides design stress intensities for nonferrous materials for Section III, Division 1, Classes 1, TC, and SC construction. Table 2B materials are ordered in the same manner as in Table 1B. Refer back to para. 2.2 for that description. 2.5 TABLE 5B Table 5B provides allowable stresses for nonferrous materials for Section VIII, Division 2 construction. This Table is organized in the same manner as Table 1B. Refer back to para. 2.2 for that description. Table 2A provides design stress intensities for ferrous materials for Section III, Division 1, Classes 1, TC, and SC construction. This Table is organized in the same manner as Table 1A. Refer back to para. 2.1 for that description. 2.4 TABLE 5A Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu by the copper materials (CXXXXX), nickel‐base materials (NXXXXX), and the reactive and refractory metals and alloys (RXXXXX). 4 This guidance should help define which group of A/B/C values of thermal expansion to select for a given brass or bronze. (d) Table TE-4 provides thermal expansion values for nickel alloys and refractory alloys. The thermal expansion value sets for the nickel alloys are arranged by increasing UNS NXXXXX numbers. (e) Table TE-5 provides thermal expansion values for two groupings of titanium‐base alloys. One group covers only Grade 9; the other group covers the other alloys. In this Table, there is no reference to the UNS number, just to the grade number. PHYSICAL PROPERTY TABLES Since physical properties (thermal conductivity, thermal diffusivity, thermal expansion, and density), Young’s modulus, and Poisson’s ratio values can be shown for numerous materials with a single set of property values, most of the tables found in Subpart 2 of Section II, Part D are based on nominal composition. Paragraphs 4.1 through 4.4 describe how these tables are organized. 4.1 4.2 TABLE TE Table TCD provides both thermal conductivity (TC) and thermal diffusivity (TD) values for numerous ferrous and nonferrous materials and material groupings. The table begins with ferrous materials, split into groups of carbon and low alloy steels, followed by groups of high chromium steels and groups of high alloy steels. For each of these groups, there is a listing of nominal composition designations found at the end of the table, defining the extent of coverage. The next series of materials are the nickel‐base alloys, covered by TC/TD listings for nickel alloys (arranged by increasing UNS number) and refractory alloys. Then there are TC/TD listings for individual titanium and aluminum alloys (arranged by increasing UNS number). Table TCD does not currently provide values for copper or zirconium alloys. 4.3 TABLE TM Table TM provides moduli of elasticity for five categories of materials, as follows: (a) Table TM-1 covers ferrous materials in nine general categories and with additional lines for specific materials. Groups A through G are subdivided by nominal composition; see the Notes at the end of Table TM-1. (b) Table TM-2 covers aluminum alloys, listed by UNS number designation. (c) Table TM-3 covers copper alloys, listed by UNS number designation. (d) Table TM-4 covers nickel alloys, listed by UNS number designation. (e) Table TM-5 covers titanium alloys, listed by increasing grade numbers, and zirconium‐base alloys, listed by increasing UNS number (or grade) designation. 4.4 TABLE PRD Table PRD provides Poisson’s ratio and density for ferrous and nonferrous materials. 4 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Table TE covers thermal expansion behavior, presented in terms of A (instantaneous coefficient of thermal expansion), B (mean coefficient of thermal expansion), and C (linear thermal expansion). This Table is split into five parts as follows: (a) Table TE-1 covers numerous individual ferrous materials and ferrous material groupings. Notes at the end of Table TE-1 list the nominal compositions covered by the designated groupings. Again, knowledge of the nominal composition for a given material is essential, and it was noted previously that these can be extracted from Table QW/QB‐422 of Section IX, given the specification number and grade or type designation. (b) Table TE-2 covers aluminum alloys. One set of A/ B/C values covers all of the aluminum‐base materials listed in General Note (a) of Table TE-2. (c) Table TE-3 covers copper alloys, currently in five general groupings: C1XXXX alloys, bronze alloys, brass alloys, 70Cu–30Ni, and 90Cu–10Ni. According to an article in ASM International’s “Advanced Materials & Processes” (December 1999), the general terms of bronze and brass cover the following alloys: (1) wrought copper‐base alloys (-a) C20500–C28580 — brasses (Cu–Zn) (-b) C31200–C38590 — leaded brasses (Cu– Zn–Pb) (-c) C40400–C49080 — tin brasses (Cu–Zn– Sn–Pb) (-d) C60600–C64400 — aluminum bronzes (Cu– Al–Ni–Fe–Si–Sn) (-e) C64700–C66100 — silicon bronzes (Cu– Si–Sn) (2) cast copper‐base alloys (-a) C83300–C85800 — red and leaded red brasses (Cu–Zn–Sn–Pb) (-b) C86100–C86800 — manganese bronzes and leaded manganese bronzes (Cu–Zn–Mn–Fe–Pb) (-c) C90200–C94500 — tin bronzes and leaded tin bronzes (Cu–Sn–Zn–Pb) (-d) C95300–C95810 — aluminum bronzes (Cu– Al–Fe–Ni) TABLE TCD Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu 5 REFERENCES Nominal compositions are defined by various groups within the ASME Code committee structure and there are no published guidelines describing how these designations are developed. These designations have the greatest relevance in the arrangement of ferrous materials and, as indicated previously, the simplest way to obtain these designations is to look in Section IX of the ASME Boiler and Pressure Vessel Code and use Table QW/QB‐422, which is arranged by increasing specification number. These start with the “SA” specification numbers, followed by the “SB” numbers. The official reference for UNS numbers is Metals & Alloys in the Unified Numbering System, ASTM DS‐56. This document is periodically updated as various material specifications are revised, added, or deleted by their sponsoring organizations. Only UNS numbers published in this reference appear in Section II, Part A and Part B specifications, and in the various Section II, Part D stress tables, mechanical property tables, and physical property tables. This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 Carbon steel Carbon steel Carbon steel Sheet Sheet Bar SA–1008 SA–1008 SA–675 CS–A CS–B 45 ... ... ... ... ... ... ... ... ... 1 1 1 1 1 1 4 5 6 7 8 Carbon Carbon Carbon Carbon Carbon Wld. pipe Plate Plate Wld. pipe Sheet SA–134 SA–283 SA–285 SA–672 SA–414 A283A A A A45 A ... ... K01700 K01700 K01501 ... ... ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 1 1 9 10 11 Carbon steel Carbon steel Carbon steel Wld. tube Wld. tube Smls. tube SA–178 SA–178 SA–179 A A ... K01200 ... K01200 ... K01200 ... ... ... ... 1 1 1 1 1 1 12 13 14 15 Carbon Carbon Carbon Carbon steel steel steel steel Smls. tube Wld. tube Smls. tube Wld. tube SA–192 SA–214 SA–556 SA–557 ... ... A2 A2 K01201 K01807 K01807 K01807 ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 16 17 18 19 20 21 Carbon Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel steel Wld. pipe Wld. pipe Wld. pipe Wld. pipe Smls. pipe Smls. pipe SA–53 SA–53 SA–53 SA–53 SA–53 SA–53 E/A E/A E/A F/A S/A S/A K02504 K02504 K02504 ... K02504 K02504 ... ... ... ... ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 1 1 1 1 22 23 24 25 26 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Smls. pipe Wld. pipe Forged pipe Wld. pipe Wld. pipe SA–106 SA–135 SA–369 SA–587 SA–587 A A FPA ... ... K02501 ... K02501 K11500 K11500 ... ... ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 1 1 27 28 29 30 Carbon Carbon Carbon Carbon steel steel steel steel Bar Bar Wld. pipe Plate SA–675 SA–675 SA–134 SA–283 50 50 A283B B ... ... ... ... ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 31 32 33 34 35 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Plate Plate Wld. pipe Sheet Plate SA–285 SA–285 SA–672 SA–414 SA/EN 10028–3 B B A50 B P275NH K02200 K02200 K02200 K02201 ... ... ... ... ... ... ... ... ... ... 6 < t ≤ 10 1 1 1 1 1 1 1 1 1 1 36 37 38 39 40 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Plate Smls. tube Plate Smls. tube Smls. tube SA/EN SA/EN SA/EN SA/EN SA/EN P235GH P235GH P275NH P235GH P235GH ... ... ... ... ... ... ... ... ... ... ≤21/4 15/8 < t ≤ 21/2 4<t≤6 5 /8 < t ≤ 15/8 t ≤5/8 1 1 1 1 1 1 1 1 1 1 41 42 43 Carbon steel Carbon steel Carbon steel Plate Bar Bar SA/EN 10028–3 P275NH SA–675 55 SA–675 55 ... ... ... ... ... ... 21/4 < t ≤ 4 ... ... 1 1 1 1 1 1 Line No. Nominal Composition steel steel steel steel steel Product Form Spec. No. 10028–2 10216–2 10028–3 10216–2 10216–2 6 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 40 40 45 20 20 22.5 NP NP NP NP NP 650 (Cl. 3 only) 650 650 900 NP NP 650 CS–6 CS–6 CS–6 ... ... G10, G22, T10 4 5 6 7 8 45 45 45 45 45 24 24 24 24 25 NP NP 900 NP NP 300 (Cl. 3 only) 300 (Cl. 3 only) 700 700 NP NP 650 900 NP 900 NP 650 650 NP 650 CS–1 CS–1 CS–1 CS–1 CS–1 W12 ... G10, T2 S6, W10, W12 G10, T2 9 10 11 47 47 47 26 26 26 1000 1000 NP NP NP NP NP 1000 900 NP 650 650 CS–1 CS–1 CS–1 G4, G10, S1, T2, W13 G3, G10, G24, S1, T2, W6 G10, T2 12 13 14 15 47 47 47 47 26 26 26 26 1000 NP NP NP NP NP NP NP 1000 1000 1000 1000 650 650 650 650 CS–1 CS–1 CS–1 CS–1 G10, G24, G10, G24, 16 17 18 19 20 21 48 48 48 48 48 48 30 30 30 30 30 30 900 900 NP 750 900 NP NP 300 (Cl. 3 only) NP NP 300 (Cl. 3 only) 700 (SPT) NP NP 900 NP NP 900 NP NP 650 NP NP 650 CS–2 CS–2 CS–2 CS–2 CS–2 CS–2 G3, G10, G10, S1, G24, T2, G2, G10, G10, S1, G10, T2 22 23 24 25 26 48 48 48 48 48 30 30 30 30 30 1000 NP 1000 NP NP 700 NP NP 300 (Cl. 3 only) NP 1000 900 NP NP 850 650 650 NP NP 650 CS–2 CS–2 CS–2 CS–2 CS–2 G10, G24, G10, ... G24, 27 28 29 30 50 50 50 50 25 25 27 27 NP 850 NP NP 650 (Cl. 3 only) 700 (SPT) 300 (Cl. 3 only) 300 (Cl. 3 only) NP 900 NP 650 NP 650 NP 650 CS–1 CS–1 CS–1 CS–1 ... G10, G15, G22, S1, T2 W12 ... 31 32 33 34 35 50 50 50 50 51 27 27 27 30 31 900 NP NP NP NP NP 700 700 NP NP NP 900 NP 900 400 NP 650 NP 650 NP CS–1 CS–1 CS–1 CS–2 CS–2 G10, S1, T1 G10, T1 S6, T1, W10, W12 G10, T1 G10 36 37 38 39 40 52 52 52 52 52 31 31 32.5 32.5 34 NP 1000 NP 1000 1000 NP NP NP NP NP 700 1000 400 1000 1000 NP NP NP NP NP CS–2 CS–2 CS–2 CS–2 CS–2 T11 G10, S1, T2, W14 G10 G10, S1, T2, W14 G10, S1, T2, W14 41 42 43 53.5 55 55 34 27.5 27.5 NP 850 NP NP 700 (SPT) 650 (Cl. 3 only) 400 900 NP NP 650 NP CS–2 CS–1 CS–1 G10 G10, G15, G22, S1, T2 ... 7 Notes S1, T2 T2, W6 T2 T2, W6 S1, T2 T2, W12, W13 W6 S10, T2, W15 T2 S1, T1 T2, W6 S1, T1 T2, W6 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 11.4 11.4 12.9 11.4 11.4 12.9 11.4 11.4 12.9 ... ... ... 11.4 11.4 12.9 11.4 11.4 12.8 10.9 10.9 12.2 10.2 10.2 11.5 9.9 9.9 11.1 ... ... 10.7 ... ... 10.4 ... ... 9.2 ... ... 7.9 ... ... 5.9 4 5 6 7 8 12.9 12.9 12.9 12.9 12.9 ... 12.9 12.9 ... 12.9 12.9 12.9 12.9 12.9 12.9 ... ... ... ... ... 12.9 12.9 12.9 12.9 12.9 ... 12.9 12.9 12.9 12.9 ... 12.9 12.9 12.9 12.9 ... 12.3 12.3 12.3 12.8 ... 11.9 11.9 11.9 12.4 ... ... 11.5 11.5 11.9 ... ... 10.7 ... 10.7 ... ... 9.2 ... 9.2 ... ... 7.9 ... 7.9 ... ... 5.9 ... 5.9 9 10 11 13.4 11.4 13.4 ... 11.4 13.4 13.4 11.4 13.4 ... ... ... 13.4 11.4 13.4 13.4 11.4 13.4 13.4 11.4 13.4 13.3 11.3 13.3 12.8 10.9 12.8 12.4 10.5 12.4 10.7 9.1 10.7 9.2 7.8 9.2 7.9 6.7 7.9 5.9 5.0 5.9 12 13 14 15 13.4 11.4 13.4 11.4 13.4 11.4 13.4 11.4 13.4 11.4 13.4 11.4 ... ... ... ... 13.4 11.4 13.4 11.4 13.4 11.4 13.4 11.4 13.4 11.4 13.4 11.4 13.3 11.3 13.3 11.3 12.8 10.9 12.8 10.9 12.4 10.5 12.4 10.5 10.7 9.1 10.7 9.1 9.2 7.8 9.2 7.8 7.9 6.7 7.9 6.7 5.9 5.0 5.9 5.0 16 17 18 19 20 21 11.7 13.7 11.7 8.2 13.7 13.7 ... ... 11.7 ... ... 13.7 11.7 13.7 11.7 8.2 13.7 13.7 ... ... ... ... ... ... 11.7 13.7 11.7 8.2 13.7 13.7 11.7 13.7 11.7 8.2 13.7 13.7 11.7 13.7 11.7 8.2 13.7 13.7 11.7 13.7 11.7 8.2 13.7 13.7 11.7 13.7 11.7 8.2 13.7 13.7 10.6 12.5 10.6 7.5 12.5 12.5 9.1 10.7 9.1 6.4 10.7 10.7 7.7 9.0 7.9 ... 9.0 9.3 6.1 7.1 6.7 ... 7.1 7.9 4.3 5.0 5.5 ... 5.0 6.5 22 23 24 25 26 13.7 11.7 13.7 13.7 11.7 13.7 11.7 ... ... 11.7 13.7 11.7 13.7 13.7 11.7 ... ... ... ... ... 13.7 11.7 13.7 13.7 11.7 13.7 11.7 13.7 ... 11.7 13.7 11.7 13.7 ... 11.7 13.7 11.7 13.7 ... 11.7 13.7 11.7 13.7 ... 11.7 12.5 10.6 12.5 ... 10.6 10.7 9.1 10.7 ... 9.1 9.3 7.9 9.0 ... 7.9 7.9 6.7 7.1 ... 6.7 6.5 5.5 5.0 ... ... 27 28 29 30 14.3 14.3 14.3 14.3 ... 14.3 ... 14.3 14.3 14.3 14.3 14.3 ... ... ... ... 14.3 14.3 14.3 14.3 14.2 14.2 ... 14.3 13.6 13.6 ... 14.3 12.8 12.8 ... 13.8 12.4 12.4 ... 13.3 ... 11.9 ... ... ... 10.7 ... ... ... 9.3 ... ... ... 7.9 ... ... ... 6.5 ... ... 31 32 33 34 35 14.3 14.3 14.3 14.3 14.5 ... 14.3 ... 14.3 14.5 14.3 14.3 14.3 14.3 14.5 ... ... ... ... ... 14.3 14.3 14.3 14.3 14.5 14.3 14.3 14.3 14.3 14.5 14.3 14.3 14.3 14.3 ... 13.8 13.8 13.8 14.3 ... 13.3 13.3 13.3 14.3 ... 12.5 12.5 12.5 12.5 ... 11.0 11.2 ... 11.2 ... 9.4 9.6 ... 9.6 ... 7.3 8.1 ... 8.1 ... 5.0 5.9 ... 5.9 ... 36 37 38 39 40 14.9 14.9 14.9 14.9 14.9 14.9 ... 14.9 ... ... 14.9 14.9 14.9 14.9 14.9 14.9 ... ... ... ... 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9 ... 14.9 14.9 14.9 14.9 ... 14.9 14.9 14.6 14.9 ... 14.9 14.9 12.5 14.9 ... 14.9 14.9 ... 13.0 ... 13.0 13.0 ... 10.8 ... 10.8 10.8 ... 8.7 ... 8.7 8.7 ... 5.9 ... 5.9 5.9 41 42 43 15.3 15.7 15.7 15.3 15.7 ... 15.3 15.7 15.7 ... ... ... 15.3 15.7 15.7 15.3 15.7 15.7 ... 14.9 14.9 ... 14.1 14.1 ... 13.6 13.6 ... 13.1 ... ... 12.7 ... ... 10.8 ... ... 8.7 ... ... 5.9 ... 8 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 7 8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 4.0 3.4 ... 2.5 2.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 12 13 14 15 4.0 3.4 4.0 3.4 2.5 2.1 2.5 2.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 20 21 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 26 4.5 ... 3.0 ... ... 2.5 ... 1.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 35 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 40 ... 4.0 ... 4.0 4.0 ... 2.5 ... 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 Carbon steel Carbon steel Carbon steel Wld. pipe Plate Plate SA–134 SA–283 SA–285 A283C C C K02401 ... K02401 ... K02801 ... ... ... ... 1 1 1 1 1 1 4 5 6 Carbon steel Carbon steel Carbon steel Smls. & wld. pipe Smls. & wld. tube Wld. tube SA–333 SA–334 SA–334 1 1 1 K03008 ... K03008 ... K03008 ... ... ... ... 1 1 1 1 1 1 7 8 9 10 Carbon Carbon Carbon Carbon steel steel steel steel Plate Smls. pipe Wld. pipe Wld. pipe SA–516 SA–524 SA–671 SA–671 55 II CA55 CE55 K01800 K02104 K02801 K02202 ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 11 12 13 14 15 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Wld. pipe Wld. pipe Wld. pipe Wld. pipe Sheet SA–672 SA–672 SA–672 SA–672 SA–414 A55 B55 C55 E55 C K02801 K02001 K01800 K02202 K02503 ... ... ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 1 1 16 17 18 19 Carbon Carbon Carbon Carbon steel steel steel steel Plate Bar Plate, sheet Plate, sheet SA/EN 10028–3 SA–36 SA–36 SA–662 P275NH ... ... A ... K02600 K02600 K01701 ... ... ... ... ≤21/4 ... ... ... 1 1 1 1 1 1 1 1 20 21 22 Carbon steel Carbon steel Carbon steel Plate, bar, shapes Plate, bar, shapes Plate, bar, shapes SA/IS 2062 SA/IS 2062 SA/IS 2062 E250A E250B E250C ... ... ... ... ... ... t > 11/2 t > 11/2 t > 11/2 1 1 1 1 1 1 23 24 25 26 27 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Plate, bar, shapes Plate, bar, shapes Plate, bar, shapes Plate Smls. tube SA/IS 2062 SA/IS 2062 SA/IS 2062 SA/EN 10028–2 SA/EN 10216–2 E250A E250B E250C P265GH P265GH ... ... ... ... ... ... ... ... ... ... /4 < t ≤ 11/2 /4 < t ≤ 11/2 3 /4 < t ≤ 11/2 ≤21/4 15/8 < t ≤ 21/2 1 1 1 1 1 1 1 1 1 1 28 29 30 31 32 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Plate, bar, shapes Plate, bar, shapes Plate, bar, shapes Smls. tube Smls. tube SA/IS 2062 SA/IS 2062 SA/IS 2062 SA/EN 10216–2 SA/EN 10216–2 E250A E250B E250C P265GH P265GH ... ... ... ... ... ... ... ... ... ... t ≤3/4 t ≤3/4 t ≤3/4 5 /8 < t ≤ 15/8 t ≤5/8 1 1 1 1 1 1 1 1 1 1 33 34 35 36 37 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Forgings Castings Forgings Forgings Castings SA–181 SA–216 SA–266 SA–350 SA–352 ... WCA 1 LF1 LCA K03502 J02502 K03506 K03009 J02504 60 ... ... 1 ... ... ... ... ... ... 1 1 1 1 1 1 1 1 1 1 38 39 40 41 Carbon Carbon Carbon Carbon steel steel steel steel Cast pipe Bar Bar Forgings SA–660 SA–675 SA–675 SA–765 WCA 60 60 I J02504 ... ... K03046 ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 Line No. Nominal Composition Product Form Spec. No. 10 3 3 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 55 55 55 30 30 30 NP NP 900 300 (Cl. 3 only) 300 (Cl. 3 only) 700 NP 650 900 NP 650 650 CS–2 CS–2 CS–2 W12 ... G10, S1, T2 4 5 6 55 55 55 30 30 30 NP NP NP 700 700 NP 650 650 650 650 650 650 CS–2 CS–2 CS–2 W12, W14 W12, W14 G24, W6 7 8 9 10 55 55 55 55 30 30 30 30 850 NP NP NP 700 NP 700 700 1000 1000 NP NP 650 650 NP NP CS–2 CS–2 CS–2 CS–2 G10, S1, T2 G10, T2 S6, W10, W12 S6, W10, W12 11 12 13 14 15 55 55 55 55 55 30 30 30 30 33 NP NP NP NP NP 700 700 700 700 700 NP NP NP NP 900 NP NP NP NP 650 CS–2 CS–2 CS–2 CS–2 CS–2 S6, W10, S6, W10, S6, W10, S6, W10, G10, T1 16 17 18 19 56.5 58 58 58 ... 36 36 40 NP 650 NP NP NP 650 (SPT) 700 NP 400 900 650 700 400 650 650 650 CS–2 CS–2 CS–2 CS–2 G10, G18 G10, G15, T1 G9, G10, T1 T1 20 21 22 59.5 59.5 59.5 33.4 33.4 33.4 NP NP NP NP NP NP 650 650 650 650 650 NP CS–2 CS–2 CS–2 ... ... ... 23 24 25 26 27 59.5 59.5 59.5 59.5 59.5 34.8 34.8 34.8 35.5 35.5 NP NP NP NP 1000 NP NP NP NP NP 650 650 650 700 1000 650 650 650 NP NP CS–2 CS–2 CS–2 CS–2 CS–2 ... ... ... T1 G10, S1, T2 28 29 30 31 32 59.5 59.5 59.5 59.5 59.5 36.3 36.3 36.3 37 38.5 NP NP NP 1000 1000 NP NP NP NP NP 650 650 650 1000 1000 650 650 650 NP NP CS–2 CS–2 CS–2 CS–2 CS–2 ... ... ... G10, S1, T2 G10, S1, T2 33 34 35 36 37 60 60 60 60 60 30 30 30 30 30 1000 1000 1000 NP NP 700 700 700 700 700 1000 1000 1000 1000 NP 650 650 650 650 NP CS–2 CS–2 CS–2 CS–2 CS–2 G10, S1, T2 G1, G10, G17, S1, T2 G10, S1, T2 G10, T2 G17 38 39 40 41 60 60 60 60 30 30 30 30 1000 850 NP NP 700 700 (SPT) 650 (Cl. 3 only) NP NP NP 900 1000 NP NP 650 650 CS–2 CS–2 CS–2 CS–2 G1, G10, G17, S1, T2 G10, G15, S1, T2 G10, G22, T2 G10, T2 11 Notes W12 W12 W12 W12 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 15.7 15.7 15.7 ... 15.7 15.7 15.7 15.7 15.7 ... ... ... 15.7 15.7 15.7 ... 15.7 15.7 ... 15.7 15.7 ... 15.3 15.3 ... 14.8 14.8 ... ... 14.3 ... ... 13.0 ... ... 10.8 ... ... 8.7 ... ... 5.9 4 5 6 15.7 15.7 13.4 ... ... 13.4 15.7 15.7 13.4 ... ... ... 15.7 15.7 13.4 15.7 15.7 13.4 15.7 15.7 13.4 15.3 15.3 13.0 14.8 14.8 12.6 14.3 14.3 ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 15.7 15.7 15.7 15.7 15.7 15.7 ... ... 15.7 15.7 15.7 15.7 ... ... ... ... 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.3 15.3 15.3 15.3 14.8 14.8 14.8 14.8 14.3 14.3 14.3 14.3 13.0 13.0 ... ... 10.8 10.8 ... ... 8.7 8.7 ... ... 5.9 5.9 ... ... 11 12 13 14 15 15.7 15.7 15.7 15.7 15.7 ... ... ... ... 15.7 15.7 15.7 15.7 15.7 15.7 ... ... ... ... ... 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.3 15.3 15.3 15.3 15.7 14.8 14.8 14.8 14.8 15.7 14.3 14.3 14.3 14.3 15.6 ... ... ... ... 13.0 ... ... ... ... 10.8 ... ... ... ... 8.7 ... ... ... ... 5.9 16 17 18 19 16.1 16.6 16.6 16.6 16.1 16.6 ... 16.6 16.1 16.6 16.6 16.6 ... ... ... ... 16.1 16.6 16.6 16.6 16.1 16.6 16.6 16.6 ... 16.6 16.6 16.6 ... 16.6 16.6 16.6 ... 16.6 16.6 16.6 ... 15.6 15.6 15.6 ... 13.0 ... ... ... 10.8 ... ... ... 8.7 ... ... ... 5.9 ... ... 20 21 22 17.0 17.0 17.0 ... ... ... 17.0 17.0 17.0 ... ... ... 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 16.5 16.5 16.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 27 17.0 17.0 17.0 17.0 17.0 ... ... ... 17.0 ... 17.0 17.0 17.0 17.0 17.0 ... ... ... 17.0 ... 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 ... ... ... 15.6 17.0 ... ... ... ... 13.0 ... ... ... ... 10.8 ... ... ... ... 8.7 ... ... ... ... 5.9 28 29 30 31 32 17.0 17.0 17.0 17.0 17.0 ... ... ... ... ... 17.0 17.0 17.0 17.0 17.0 ... ... ... ... ... 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 ... ... ... 17.0 17.0 ... ... ... 13.0 13.0 ... ... ... 10.8 10.8 ... ... ... 8.7 8.7 ... ... ... 5.9 5.9 33 34 35 36 37 17.1 17.1 17.1 17.1 17.1 17.1 ... 17.1 17.1 ... 17.1 17.1 17.1 17.1 17.1 ... ... ... ... ... 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 16.3 16.3 16.3 16.3 16.3 15.3 15.3 15.3 15.3 15.3 14.8 14.8 14.8 14.8 14.8 14.3 14.3 14.3 14.3 14.3 13.0 13.0 13.0 13.0 ... 10.8 10.8 10.8 10.8 ... 8.7 8.7 8.7 8.7 ... 5.9 5.9 5.9 5.9 ... 38 39 40 41 17.1 17.1 17.1 17.1 ... ... 17.1 17.1 17.1 17.1 17.1 17.1 ... ... ... ... 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 16.3 16.3 16.3 16.3 15.3 15.3 15.3 15.3 14.8 14.8 14.8 14.8 14.3 14.3 14.3 14.3 13.0 13.0 13.0 13.0 10.8 10.8 10.8 10.8 8.7 8.7 8.7 8.7 5.9 ... 5.9 5.9 12 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 4.0 4.0 ... ... 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 15 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 27 ... ... ... ... 4.0 ... ... ... ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 31 32 ... ... ... 4.0 4.0 ... ... ... 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 36 37 4.0 4.0 4.0 4.0 ... 2.5 2.5 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 4.0 ... ... 4.0 2.5 ... ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 5 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Plate Plate Wld. pipe Wld. pipe Wld. pipe SA–515 SA–516 SA–671 SA–671 SA–671 60 60 CB60 CC60 CE60 K02401 K02100 K02401 K02100 K02402 ... ... ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 1 1 6 7 8 9 10 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Wld. pipe Wld. pipe Wld. pipe Wld. pipe Plate SA–672 SA–672 SA–672 SA–134 SA–283 B60 C60 E60 A283D D K02401 K02100 K02402 K02702 K02702 ... ... ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 1 1 11 12 13 14 Carbon Carbon Carbon Carbon steel steel steel steel Wld. pipe Wld. pipe Smls. pipe Smls. pipe SA–53 SA–53 SA–53 SA–53 E/B E/B S/B S/B K03005 K03005 K03005 K03005 ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 15 16 17 Carbon steel Carbon steel Carbon steel Smls. pipe SA–106 Wld. pipe SA–135 Smls. & wld. fittings SA–234 B B WPB K03006 ... ... ... K03006 ... ... ... ... 1 1 1 1 1 1 18 19 20 21 Carbon Carbon Carbon Carbon steel steel steel steel Smls. & wld. pipe Wld. pipe Smls. & wld. tube Wld. tube SA–333 SA–333 SA–334 SA–334 6 6 6 6 K03006 K03006 K03006 K03006 ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 22 23 24 25 Carbon Carbon Carbon Carbon steel steel steel steel Forged pipe Forgings Sheet Smls. & wld. fittings SA–369 SA–372 SA–414 SA–420 FPB A D WPL6 K03006 K03002 K02505 ... ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 26 27 28 Carbon steel Carbon steel Carbon steel Smls. pipe Bar Forgings SA–524 SA–696 SA–727 I B ... K02104 ... K03200 ... K02506 ... ... ... ... 1 1 1 1 1 1 29 30 31 Carbon steel Carbon steel Carbon steel Wld. tube Wld. tube Wld. tube SA–178 SA–178 SA–178 C C C K03503 ... K03503 ... K03503 ... ... ... ... 1 1 1 1 1 1 32 33 34 35 Carbon Carbon Carbon Carbon steel steel steel steel Smls. tube Smls. tube Wld. tube Plate, bar SA–210 SA–556 SA–557 SA/CSA–G40.21 A–1 B2 B2 38W K02707 K02707 K03007 ... ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 36 37 38 39 40 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Plate Plate Plate Plate Bar SA/AS 1548 SA/AS 1548 SA/EN 10028–2 SA/EN 10028–2 SA–675 PT430N PT430NR P295GH P295GH 65 ... ... ... ... ... Normalized Norm. rld. ... ... ... ≤6 ≤6 6 < t ≤ 10 4<t≤6 ... 1 1 1 1 1 1 1 1 1 1 41 42 43 Carbon steel Carbon steel Carbon steel Castings Plate Plate SA–352 SA–515 SA–516 LCB 65 65 J03003 ... K02800 ... K02403 ... ... ... ... 1 1 1 1 1 1 Line No. Nominal Composition Product Form Spec. No. 14 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 60 60 60 60 60 32 32 32 32 32 1000 850 NP NP NP 700 700 700 700 700 1000 1000 NP NP NP 650 650 NP NP NP CS–2 CS–2 CS–2 CS–2 CS–2 G10, S1, G10, S1, S6, W10, S6, W10, S6, W10, 6 7 8 9 10 60 60 60 60 60 32 32 32 33 33 NP NP NP NP NP 700 700 700 300 (Cl. 3 only) 300 (Cl. 3 only) NP NP NP NP 650 NP NP NP NP 650 CS–2 CS–2 CS–2 CS–2 CS–2 S6, W10, W12 S6, W10, W12 S6, W10, W12 W12 ... 11 12 13 14 60 60 60 60 35 35 35 35 900 900 900 NP 300 (Cl. 3 only) NP 300 (Cl. 3 only) 700 (SPT) NP 900 NP 900 NP 650 NP 650 CS–2 CS–2 CS–2 CS–2 G10, S1, T1, W12, W13 G3, G10, G24, S1, T1, W6 G10, S1, T1 G10, T1 15 16 17 60 60 60 35 35 35 1000 NP 1000 700 NP 700 1000 900 1000 650 650 650 CS–2 CS–2 CS–2 G10, S1, T1 G24, T1, W6 G10, S1, T1 18 19 20 21 60 60 60 60 35 35 35 35 700 700 NP NP 700 NP 700 NP 1000 NP 650 650 650 NP 650 650 CS–2 CS–2 CS–2 CS–2 G10, T1, W12, W13, W14 T1 T1, W12, W14 G24, W6 22 23 24 25 60 60 60 60 35 35 35 35 1000 NP NP NP NP NP NP 700 NP 650 900 850 NP 650 650 650 CS–2 CS–2 CS–2 CS–2 G10, S1, T1 ... G10, T1 G10, T1, W14 26 27 28 60 60 60 35 35 36 NP NP NP NP 700 700 1000 NP 1000 650 NP 650 CS–2 CS–2 CS–2 G10, T1 T1 G10, G22, T1 29 30 31 60 60 60 37 37 37 1000 1000 1000 NP 700 NP NP NP 1000 NP NP 650 CS–2 CS–2 CS–2 G4, G10, S1, T2 G10, S1, T1, W13 G3, G10, G24, S1, T2, W6 32 33 34 35 60 60 60 60 37 37 37 38 1000 NP NP NP 700 NP NP NP 1000 1000 1000 650 650 650 650 650 CS–2 CS–2 CS–2 CS–2 G10, S1, T1 G10, T1 G24, T1, W6 ... 36 37 38 39 40 62.5 62.5 62.5 64 65 32 34 32.5 1000 1000 850 850 850 NP NP NP NP 650 (Cl. 3 only) 1000 1000 1000 1000 1000 NP NP NP NP 650 CS–2 CS–2 CS–2 CS–2 CS–2 G10, G10, G10, G10, G10, 41 42 43 65 65 65 35 35 35 NP 1000 850 700 700 700 650 1000 1000 650 650 650 CS–2 CS–2 CS–2 G1, G17 G10, S1, T2 G10, S1, T2 ... ... 15 Notes T2 T2 W12 W12 W12 G18, S1, T1 G18, S1, T1 S1, T2 S1, T2 G15, G22, S1, T2 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 17.1 17.1 17.1 17.1 17.1 17.1 17.1 ... ... ... 17.1 17.1 17.1 17.1 17.1 ... ... ... ... ... 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 16.4 16.4 16.4 16.4 16.4 15.8 15.8 15.8 15.8 15.8 15.3 15.3 15.3 15.3 15.3 13.0 13.0 ... ... ... 10.8 10.8 ... ... ... 8.7 8.7 ... ... ... 5.9 5.9 ... ... ... 6 7 8 9 10 17.1 17.1 17.1 17.1 17.1 ... ... ... ... 17.1 17.1 17.1 17.1 17.1 17.1 ... ... ... ... ... 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 ... 17.1 17.1 17.1 17.1 ... 17.1 16.4 16.4 16.4 ... 16.9 15.8 15.8 15.8 ... 16.3 15.3 15.3 15.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 17.1 14.6 17.1 17.1 ... 14.6 ... 17.1 17.1 14.6 17.1 17.1 ... ... ... ... 17.1 14.6 17.1 17.1 17.1 14.6 17.1 17.1 17.1 14.6 17.1 17.1 17.1 14.6 17.1 17.1 17.1 14.6 17.1 17.1 15.6 13.3 15.6 15.6 13.0 11.1 13.0 13.0 10.8 9.2 10.8 10.8 8.7 7.4 8.7 8.7 5.9 5.0 5.9 5.9 15 16 17 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 17.1 ... ... ... 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 17.1 15.6 13.3 15.6 13.0 11.1 13.0 10.8 9.2 10.8 8.7 7.4 8.7 5.9 5.0 5.9 18 19 20 21 17.1 14.6 17.1 14.6 17.1 14.6 ... 14.6 17.1 14.6 17.1 14.6 ... ... ... ... 17.1 14.6 17.1 14.6 17.1 14.6 17.1 14.6 17.1 14.6 17.1 14.6 17.1 14.6 17.1 14.6 17.1 14.6 17.1 14.6 15.6 13.3 15.6 ... 13.0 ... ... ... 10.8 ... ... ... 8.7 ... ... ... 5.9 ... ... ... 22 23 24 25 17.1 17.1 17.1 17.1 ... 17.1 17.1 17.1 17.1 17.1 17.1 17.1 ... 17.1 ... ... 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 15.6 ... 15.6 15.6 13.0 ... 13.0 13.0 10.8 ... 10.8 10.8 8.7 ... 8.7 8.7 5.9 ... 5.9 ... 26 27 28 17.1 17.1 17.1 17.1 ... 17.1 17.1 17.1 17.1 ... ... ... 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 15.6 15.6 15.6 13.0 ... 13.0 10.8 ... 10.8 8.7 ... 8.7 5.9 ... 5.9 29 30 31 17.1 17.1 14.6 ... ... ... 17.1 17.1 14.6 ... ... ... 17.1 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 15.6 15.6 13.3 13.0 13.0 11.1 10.8 10.8 9.2 8.7 8.7 7.4 5.0 5.9 5.0 32 33 34 35 17.1 17.1 14.6 17.1 17.1 17.1 14.6 ... 17.1 17.1 14.6 17.1 ... ... ... ... 17.1 17.1 14.6 17.1 17.1 17.1 14.6 17.1 17.1 17.1 14.6 17.1 17.1 17.1 14.6 17.1 17.1 17.1 14.6 17.1 15.6 15.6 13.3 ... 13.0 13.0 11.1 ... 10.8 10.8 9.2 ... 8.7 8.7 7.4 ... 5.9 5.9 5.0 ... 36 37 38 39 40 17.9 17.9 17.9 18.3 18.6 17.9 17.9 17.9 18.3 18.6 17.9 17.9 17.9 18.3 18.6 17.9 17.9 17.9 18.3 18.6 17.9 17.9 17.9 18.3 18.6 17.9 17.9 17.9 18.3 18.5 17.9 17.9 17.4 18.3 17.7 17.9 17.9 16.4 17.4 16.6 17.9 17.9 15.8 16.8 16.1 16.9 16.9 15.3 16.2 15.5 13.9 13.9 13.9 13.9 13.9 11.4 11.4 11.4 11.4 11.4 8.7 8.7 8.7 8.7 8.7 5.9 5.9 5.9 5.9 5.0 41 42 43 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 ... ... ... 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 17.9 17.9 17.9 17.3 17.3 17.3 16.7 16.7 16.7 ... 13.9 13.9 ... 11.4 11.4 ... 8.7 8.7 ... 5.9 5.9 16 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 4.0 4.0 ... ... ... 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 10 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 4.0 ... 4.0 2.5 ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 18 19 20 21 4.0 ... ... ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 4.0 ... ... ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 26 27 28 4.0 ... 4.0 2.5 ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 3.4 4.0 3.4 2.1 2.5 2.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 4.0 4.0 3.4 ... 2.5 2.5 2.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 40 4.0 4.0 4.0 4.0 4.0 2.5 2.5 2.5 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 ... 4.0 4.0 ... 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) SA–671 SA–671 SA–672 SA–672 CB65 CC65 B65 C65 K02800 K02403 K02800 K02403 ... ... ... ... ... ... ... ... 1 1 1 1 1 1 1 1 Sheet Plate Plate Wld. pipe Plate, bar Plate, bar SA–414 SA–662 SA–537 SA–691 SA/CSA–G40.21 SA/CSA–G40.21 E B ... CMSH–70 44W 50W K02704 K02203 K12437 K12437 ... ... ... ... 1 ... ... ... ... ... 21/2 < t ≤ 4 21/2 < t ≤ 4 t≤8 t≤6 1 1 1 1 1 1 1 1 2 2 1 1 steel steel steel steel steel steel Plate Plate Forgings Plate Plate Forgings SA/AS 1548 SA/AS 1548 SA/EN 10222–2 SA/EN 10028–2 SA/EN 10028–2 SA/EN 10222–2 PT460N PT460NR P280GH P295GH P295GH P280GH ... ... ... ... ... ... Normalized Norm. rld. NT or QT ... ... Normalized ≤6 ≤6 1.4 < t ≤ 6.3 21/4 < t ≤ 4 ≤21/4 t ≤ 1.4 1 1 1 1 1 1 1 1 1 1 1 1 Carbon Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel steel Plate Plate Plate Plate Plate Bar SA/GB 713 SA/EN 10028–2 SA/GB 713 SA/EN 10028–2 SA–455 SA–675 Q345R P355GH Q345R P355GH ... 70 ... ... ... ... K03300 ... ... ... ... ... ... ... 6<t≤8 6 < t ≤ 10 4<t≤6 4<t≤6 0.58 < t ≤3/4 ... 1 1 1 1 1 1 2 2 2 2 2 2 23 24 25 26 27 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Forgings Forgings Castings Forgings Forgings SA–105 SA–181 SA–216 SA–266 SA–266 ... ... WCB 2 4 K03504 K03502 J03002 K03506 K03017 ... 70 ... ... ... ... ... ... ... ... 1 1 1 1 1 2 2 2 2 2 28 29 30 31 Carbon Carbon Carbon Carbon steel steel steel steel Forgings Forgings Forgings Forgings SA–350 SA–350 SA–508 SA–508 LF2 LF2 1 1A K03011 K03011 K13502 K13502 1 2 ... ... ... ... ... ... 1 1 1 1 2 2 2 2 32 33 34 35 Carbon Carbon Carbon Carbon steel steel steel steel Forgings Forgings Cast pipe Forgings SA–541 SA–541 SA–660 SA–765 1 1A WCB II K03506 K03020 J03003 K03047 ... ... ... ... ... ... ... ... 1 1 1 1 2 2 2 2 36 37 38 39 Carbon Carbon Carbon Carbon steel steel steel steel Plate Plate Wld. pipe Wld. pipe SA–515 SA–516 SA–671 SA–671 70 70 CB70 CC70 K03101 K02700 K03101 K02700 ... ... ... ... ... ... ... ... 1 1 1 1 2 2 2 2 40 41 42 Carbon steel Carbon steel Carbon steel Wld. pipe Wld. pipe Plate SA–672 SA–672 SA/JIS G3118 B70 C70 SGV480 K03101 ... K02700 ... ... ... ... ... ... 1 1 1 2 2 2 Line No. Nominal Composition ð15Þ ð15Þ Product Form 1 2 3 4 Carbon Carbon Carbon Carbon steel steel steel steel Wld. Wld. Wld. Wld. 5 6 7 8 9 10 Carbon Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel steel 11 12 13 14 15 16 Carbon Carbon Carbon Carbon Carbon Carbon 17 18 19 20 21 22 pipe pipe pipe pipe Spec. No. 18 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 65 65 65 65 35 35 35 35 NP NP NP NP 700 700 700 700 NP NP NP NP NP NP NP NP CS–2 CS–2 CS–2 CS–2 S6, S6, S6, S6, 5 6 7 8 9 10 65 65 65 65 65 65 38 40 45 45 NP NP NP NP 650 650 NP NP 700 700 NP NP 900 700 650 NP 650 650 650 650 650 NP 650 650 CS–2 CS–2 CS–2 CS–2 CS–2 CS–2 G10, T1 T1 T1 G26, T1, W10, W12 G18 G18 11 12 13 14 15 16 66.5 66.5 66.5 66.5 66.5 66.5 37 37.5 ... 40.5 1000 1000 1000 850 850 1000 NP NP NP NP NP NP 1000 1000 1000 1000 1000 1000 NP NP NP NP 650 NP CS–2 CS–2 CS–2 CS–2 CS–2 CS–2 G10, G10, G10, G10, G10, G10, 17 18 19 20 21 22 68 68 69.5 69.5 70 70 38.5 40.5 41.5 43 35 35 800 850 800 850 NP 850 NP NP NP NP 400 (Cl. 3 only) 650 (Cl. 3 only) 800 1000 800 1000 650 1000 NP NP NP NP 650 650 CS–2 CS–2 CS–2 CS–2 CS–2 CS–2 T1 G10, S1, T1 T1 G10, S1, T1 ... G10, G15, G22, S1, T2 23 24 25 26 27 70 70 70 70 70 36 36 36 36 36 1000 1000 1000 1000 NP 700 700 700 700 NP 1000 1000 1000 1000 1000 650 650 650 650 650 CS–2 CS–2 CS–2 CS–2 CS–2 G10, S1, G10, S1, G1, G10, G10, S1, G10, T2 28 29 30 31 70 70 70 70 36 36 36 36 850 850 NP NP 700 700 700 700 1000 1000 1000 1000 650 650 650 650 CS–2 CS–2 CS–2 CS–2 G10, G10, G10, G10, 32 33 34 35 70 70 70 70 36 36 36 36 NP NP 1000 NP 700 700 700 NP 1000 1000 NP 1000 650 650 NP 650 CS–2 CS–2 CS–2 CS–2 G10, T2 G10, T2 G1, G10, G17, S1, T2 G10, T2 36 37 38 39 70 70 70 70 38 38 38 38 1000 850 NP NP 700 700 700 700 1000 1000 NP NP 650 650 NP NP CS–2 CS–2 CS–2 CS–2 G10, S1, G10, S1, S5, W10, S6, W10, 40 41 42 70 70 70 38 38 38 NP NP 850 700 700 NP NP NP NP NP NP NP CS–2 CS–2 CS–2 S5, W10, W12 S6, W10, W12 G10, S1, T2 ... ... ... ... 19 Notes W10, W10, W10, W10, W12 W12 W12 W12 G18, S1, T1 G18, S1, T1 S1, T2 S1, T1 G18, S1, T1 S1, T2 T2 T2 G17, S1, T2 T2 T2 T2 T2 T2 T2 T2 W12 W12 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 18.6 18.6 18.6 18.6 ... ... ... ... 18.6 18.6 18.6 18.6 ... ... ... ... 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 17.9 17.9 17.9 17.9 17.3 17.3 17.3 17.3 16.7 16.7 16.7 16.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 9 10 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 ... ... ... ... 18.6 18.6 18.6 18.6 18.6 18.6 ... ... ... ... ... ... 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 16.9 16.9 16.9 16.9 ... ... 13.9 ... ... ... ... ... 11.4 ... ... ... ... ... 8.7 ... ... ... ... ... 5.9 ... ... ... ... ... 11 12 13 14 15 16 19.0 19.0 19.1 19.0 19.0 19.1 19.0 19.0 ... 19.0 19.0 ... 19.0 19.0 19.1 19.0 19.0 19.1 19.0 19.0 ... 19.0 19.0 ... 19.0 19.0 19.1 19.0 19.0 19.1 19.0 19.0 19.1 19.0 19.0 19.1 19.0 19.0 19.1 19.0 19.0 19.1 19.0 19.0 18.8 19.0 19.0 19.1 19.0 19.0 18.1 18.5 19.0 19.1 16.9 16.9 17.5 16.7 16.7 19.1 13.9 13.9 14.8 13.9 13.9 14.8 11.4 11.4 12.0 11.4 11.4 12.0 8.7 8.7 9.3 8.7 8.7 9.3 5.9 5.9 6.7 5.9 5.9 6.7 17 18 19 20 21 22 19.5 19.5 19.9 19.9 20.0 20.0 ... 19.5 ... 19.9 20.0 20.0 19.5 19.5 19.9 19.9 20.0 20.0 ... 19.5 ... 19.9 ... ... 19.5 19.5 19.9 19.9 20.0 20.0 19.5 19.5 19.9 19.9 19.9 19.9 19.5 19.5 19.9 19.9 19.0 19.0 19.5 19.5 19.9 19.9 17.9 17.9 19.0 19.5 19.9 19.9 17.3 17.3 18.3 18.3 18.3 18.3 ... 16.7 14.8 14.8 14.8 14.8 ... 14.8 12.0 12.0 12.0 12.0 ... 12.0 ... 9.3 ... 9.3 ... 9.3 ... 6.7 ... 6.7 ... 6.7 23 24 25 26 27 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 ... 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 19.6 19.6 19.6 19.6 19.6 18.4 18.4 18.4 18.4 18.4 17.8 17.8 17.8 17.8 17.8 17.2 17.2 17.2 17.2 17.2 14.8 14.8 14.8 14.8 14.8 12.0 12.0 12.0 12.0 12.0 9.3 9.3 9.3 9.3 9.3 6.7 6.7 6.7 6.7 6.7 28 29 30 31 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 19.6 19.6 19.6 19.6 18.4 18.4 18.4 18.4 17.8 17.8 17.8 17.8 17.2 17.2 17.2 17.2 14.8 14.8 14.8 14.8 12.0 12.0 12.0 12.0 9.3 9.3 9.3 9.3 6.7 6.7 6.7 6.7 32 33 34 35 20.0 20.0 20.0 20.0 20.0 20.0 ... 20.0 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 19.6 19.6 19.6 19.6 18.4 18.4 18.4 18.4 17.8 17.8 17.8 17.8 17.2 17.2 17.2 17.2 14.8 14.8 14.8 14.8 12.0 12.0 12.0 12.0 9.3 9.3 9.3 9.3 6.7 6.7 6.7 6.7 36 37 38 39 20.0 20.0 20.0 20.0 20.0 20.0 ... ... 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 19.4 19.4 19.4 19.4 18.8 18.8 18.8 18.8 18.1 18.1 18.1 18.1 14.8 14.8 ... ... 12.0 12.0 ... ... 9.3 9.3 ... ... 6.7 6.7 ... ... 40 41 42 20.0 20.0 20.0 ... ... 20.0 20.0 20.0 20.0 ... ... ... 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 19.4 19.4 19.4 18.8 18.8 18.8 18.1 18.1 18.1 ... ... 14.8 ... ... 12.0 ... ... 9.3 ... ... ... 20 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 9 10 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 15 16 4.0 4.0 4.0 4.0 4.0 4.0 2.5 2.5 2.5 2.5 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 21 22 ... 4.0 ... 4.0 ... 4.0 ... 2.5 ... 2.5 ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 27 4.0 4.0 4.0 4.0 4.0 2.5 2.5 2.5 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 31 4.0 4.0 4.0 4.0 2.5 2.5 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 4.0 4.0 4.0 4.0 2.5 2.5 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 4.0 4.0 ... ... 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 40 41 42 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 ð15Þ ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) C D D D C K03501 ... ... ... K03501 ... ... ... ... ... ... ... ... ... ... 1 1 1 1 1 2 2 2 2 2 Castings SA–216 Smls. & wld. fittings SA–234 Castings SA–352 Castings SA–487 Plate SA–537 WCC WPC LCC 16 ... J02503 K03501 J02505 ... K12437 ... ... ... A 3 ... ... ... ... 4<t≤6 1 1 1 1 1 2 2 2 2 3 steel steel steel steel Smls. tube Wld. tube Cast pipe Bar SA–556 SA–557 SA–660 SA–696 C2 C2 WCC C K03006 K03505 J02505 K03200 ... ... ... ... ... ... ... ... 1 1 1 1 2 2 2 2 Carbon Carbon Carbon Carbon steel steel steel steel Sheet Plate Plate Plate SA–414 SA–662 SA–537 SA–738 F C ... C K03102 K02007 K12437 K02008 ... ... 2 ... ... ... 4<t≤6 4<t≤6 1 1 1 1 2 2 3 3 19 20 21 22 23 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Plate Wld. pipe Wld. pipe Wld. pipe Plate SA–537 SA–671 SA–672 SA–691 SA–841 ... CD70 D70 CMSH–70 A K12437 K12437 K12437 K12437 ... 1 ... ... ... 1 ≤21/2 ≤21/2 ≤21/2 ≤21/2 ≤4 1 1 1 1 1 2 2 2 2 2 24 25 26 27 28 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Forgings Forgings Plate Plate Plate SA/EN SA/EN SA/GB SA/EN SA/GB 10222–2 10222–2 713 10028–2 713 P305GH P305GH Q345R P355GH Q345R ... ... ... ... ... NT Normalized ... ... ... 1.4 < t ≤ 6.3 t ≤ 1.4 21/4 < t ≤ 4 2.5 < t ≤ 4 1.5 < t ≤ 21/4 1 1 1 1 1 2 2 2 2 2 29 30 31 32 33 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Plate Plate Forgings Plate Plate SA/GB 713 SA–455 SA/EN 10222–2 SA/GB 713 SA/EN 10028–2 Q345R ... P305GH Q345R P355GH ... K03300 ... ... ... ... ... QT ... ... 5 /8 < t ≤ 1.5 /8 < t ≤ 0.58 t ≤ 2.8 1 /8 ≤ t ≤5/8 ≤2.5 1 1 1 1 1 2 2 2 2 2 34 35 36 37 38 39 Carbon Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel steel Forgings Plate Plate Wld. pipe Wld. pipe Wld. pipe SA–266 SA–455 SA–299 SA–671 SA–672 SA–691 3 ... A CK75 N75 CMS–75 K05001 K03300 K02803 K02803 K02803 K02803 ... ... ... ... ... ... ... ≤3/8 >1 >1 >1 >1 1 1 1 1 1 1 2 2 2 2 2 2 40 41 42 43 44 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Plate Wld. pipe Forgings Sheet Plate SA–299 SA–691 SA–372 SA–414 SA–738 A CMS–75 B G A K02803 K02803 K04001 K03103 K12447 ... ... ... ... ... ≤1 ≤1 ... ... ... 1 1 1 1 1 2 2 2 2 2 Line No. Nominal Composition ð15Þ ð15Þ ð15Þ ð15Þ Product Form 1 2 3 4 5 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel Smls. pipe Wld. tube Wld. tube Wld. tube Smls. tube 6 7 8 9 10 Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel 11 12 13 14 Carbon Carbon Carbon Carbon 15 16 17 18 Spec. No. SA–106 SA–178 SA–178 SA–178 SA–210 22 3 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 70 70 70 70 70 40 40 40 40 40 1000 1000 1000 1000 1000 700 NP NP NP NP 1000 NP NP NP 1000 650 NP NP NP 650 CS–2 CS–2 CS–2 CS–2 CS–2 G10, S1, G10, S1, G4, G10, G3, G10, G10, S1, 6 7 8 9 10 70 70 70 70 70 40 40 40 40 40 1000 800 NP NP NP 700 700 700 700 NP 1000 800 NP NP 700 650 650 NP NP 650 CS–2 CS–2 CS–2 CS–2 CS–2 G1, G10, G17, S1, T1 G10, T1, W14 G17, T1 ... G23, W11 11 12 13 14 70 70 70 70 40 40 40 40 NP NP 1000 NP NP NP 700 700 800 1000 NP NP 650 650 NP NP CS–2 CS–2 CS–2 CS–2 G10, T1 G24, T2, W6 G1, G10, G17, S1, T1 T1 15 16 17 18 70 70 70 70 42 43 46 46 NP NP NP NP NP NP 700 650 900 700 700 650 650 650 650 650 CS–2 CS–3 CS–3 CS–3 G10, T1 T1 G23, T1, W11 G23, W11 19 20 21 22 23 70 70 70 70 70 50 50 50 50 50 NP NP NP NP NP 700 700 700 700 NP 650 NP NP NP 650 650 NP NP NP NP CS–3 CS–3 CS–3 CS–3 CS–3 G23, T1 S6, T1, W10, W12 S6, T1, W10, W12 S6, T1, W10, W12 ... 24 25 26 27 28 71 71 71 71 71 40.5 44 44 45.5 45.5 1000 1000 800 850 800 NP NP NP NP NP 1000 1000 800 1000 800 NP NP NP NP NP CS–2 CS–2 CS–2 CS–2 CS–2 G10, S1, T2 G10, S1, T2 T1 G10, S1, T1 T1 29 30 31 32 33 72.5 73 74 74 74 47 37 41.5 50 ... 800 NP 1000 800 850 NP 400 (Cl. 3 only) NP NP NP 800 650 1000 800 1000 NP 650 NP NP NP CS–2 CS–2 CS–2 CS–2 CS–2 T1 ... G10, S1, T2 T1 G10, G18, S1, T1 34 35 36 37 38 39 75 75 75 75 75 75 37.5 38 40 40 40 40 1000 NP 1000 NP NP NP 700 400 (Cl. 3 only) 700 700 700 700 1000 650 1000 NP NP NP NP 650 650 NP NP NP CS–2 CS–2 CS–2 CS–2 CS–2 CS–2 G10, S1, ... G10, S1, S6, W10, S6, W10, S6, W10, 40 41 42 43 44 75 75 75 75 75 42 42 45 45 45 1000 NP NP NP NP 700 700 NP NP NP 1000 NP 650 900 700 650 NP 650 650 650 CS–2 CS–2 CS–3 CS–3 CS–2 G10, S1, T1 T1, W10, W12 W11 G10, T1 T1 23 Notes T1 T1, W13 S1, T4 S1, T2 T1 T2, W8, W11 T2 W12 W12 W12 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 20.0 20.0 20.0 17.0 20.0 ... ... ... ... ... 20.0 20.0 20.0 17.0 20.0 ... ... ... ... ... 20.0 20.0 20.0 17.0 20.0 20.0 20.0 20.0 17.0 20.0 20.0 20.0 20.0 17.0 20.0 20.0 20.0 20.0 17.0 20.0 19.8 19.8 19.8 16.8 19.8 18.3 18.3 18.3 15.5 18.3 14.8 14.8 14.8 12.6 14.8 12.0 12.0 12.0 10.2 12.0 9.3 9.3 9.3 7.9 9.3 6.7 6.7 5.7 5.7 6.7 6 7 8 9 10 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... 20.0 20.0 20.0 20.0 19.9 20.0 ... ... ... ... ... 20.0 20.0 20.0 18.8 19.7 20.0 20.0 20.0 18.1 19.5 20.0 20.0 20.0 17.9 18.9 20.0 20.0 20.0 17.9 18.0 19.8 19.8 19.8 17.9 17.6 18.3 18.3 18.3 17.9 17.2 14.8 14.8 ... ... ... 12.0 12.0 ... ... ... 9.3 ... ... ... ... 6.7 ... ... ... ... 11 12 13 14 20.0 17.0 20.0 20.0 20.0 17.0 ... ... 20.0 17.0 20.0 20.0 ... ... ... ... 20.0 17.0 20.0 20.0 20.0 17.0 20.0 20.0 20.0 17.0 20.0 20.0 20.0 17.0 20.0 20.0 19.8 16.8 19.8 19.8 18.3 15.5 18.3 18.3 14.8 12.6 14.8 ... 12.0 10.2 12.0 ... ... 7.9 9.3 ... ... 5.7 6.7 ... 15 16 17 18 20.0 20.0 20.0 20.0 20.0 20.0 ... ... 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 19.7 19.7 20.0 20.0 19.5 19.5 20.0 20.0 19.5 19.5 20.0 20.0 19.5 19.5 20.0 20.0 19.5 19.5 18.3 18.3 18.3 ... 14.8 ... ... ... 12.0 ... ... ... 9.3 ... ... ... 6.7 ... ... ... 19 20 21 22 23 20.0 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 19.7 19.7 19.7 19.7 20.0 19.5 19.5 19.5 19.5 20.0 19.5 19.5 19.5 19.5 20.0 19.5 19.5 19.5 19.5 20.0 19.5 19.5 19.5 19.5 20.0 18.3 18.3 18.3 18.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 28 20.3 20.3 20.3 20.3 20.3 ... ... ... 20.3 ... 20.3 20.3 20.3 20.3 20.3 ... ... ... 20.3 ... 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 19.9 20.3 20.3 20.3 20.3 19.2 20.0 18.3 18.3 18.3 14.8 14.8 14.8 14.8 14.8 12.0 12.0 12.0 12.0 12.0 9.3 9.3 ... 9.3 ... 6.7 6.7 ... 6.7 ... 29 30 31 32 33 20.7 20.9 21.1 21.1 21.1 ... 20.9 ... ... 21.1 20.7 20.9 21.1 21.1 21.1 ... ... ... ... 21.1 20.7 20.9 21.1 21.1 21.1 20.7 20.9 21.1 21.1 21.1 20.7 20.1 21.1 21.1 21.1 20.7 18.9 21.0 21.1 21.1 20.7 18.3 20.3 21.1 21.1 18.3 ... 19.6 18.3 18.3 14.8 ... 14.8 14.8 14.8 12.0 ... 12.0 12.0 12.0 ... ... 9.3 ... 9.3 ... ... 6.7 ... 6.7 34 35 36 37 38 39 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 ... ... ... 21.4 21.4 21.4 21.4 21.4 21.4 ... ... ... ... ... ... 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 20.4 20.6 21.4 21.4 21.4 21.4 19.2 19.4 20.4 20.4 20.4 20.4 18.5 18.8 19.8 19.8 19.8 19.8 17.9 ... 19.1 19.1 19.1 19.1 15.7 ... 15.7 ... ... ... 12.6 ... 12.6 ... ... ... 9.3 ... 9.3 ... ... ... 6.7 ... 6.7 ... ... ... 40 41 42 43 44 21.4 21.4 21.4 21.4 21.4 21.4 ... ... 21.4 ... 21.4 21.4 21.4 21.4 21.4 ... ... ... ... ... 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 20.8 20.8 21.4 21.4 21.4 19.6 19.6 ... 19.6 19.6 15.7 ... ... 15.7 ... 12.6 ... ... 12.6 ... 9.3 ... ... 9.3 ... 6.7 ... ... 6.7 ... 24 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 4.0 4.0 3.4 3.4 4.0 2.5 2.5 2.1 2.1 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 10 4.0 ... ... ... ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 ... 3.4 4.0 ... ... 2.1 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 23 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 28 4.0 4.0 ... 4.0 ... 2.5 2.5 ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 33 ... ... 4.0 ... 4.0 ... ... 2.5 ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 38 39 4.0 ... 4.0 ... ... ... 2.5 ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 40 41 42 43 44 4.0 ... ... ... ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 ð15Þ ð15Þ ð15Þ ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 Carbon Carbon Carbon Carbon steel steel steel steel Plate Plate Wld. pipe Plate SA–537 SA–537 SA–691 SA–738 ... ... CMSH–80 C K12437 K12437 K12437 K02008 3 2 ... ... 21/2 21/2 21/2 21/2 5 6 7 8 Carbon Carbon Carbon Carbon steel steel steel steel Plate Plate Forgings Plate SA–299 SA–299 SA–765 SA–537 B B IV ... K02803 K02803 K02009 K12437 ... ... ... 3 9 10 11 12 13 14 Carbon Carbon Carbon Carbon Carbon Carbon steel steel steel steel steel steel Plate Wld. pipe Wld. pipe Wld. pipe Plate Plate SA–537 SA–671 SA–672 SA–691 SA–738 SA–841 ... CD80 D80 CMSH–80 C B K12437 K12437 K12437 K12437 K02008 ... 2 ... ... ... ... 2 15 16 17 Carbon steel Carbon steel Carbon steel Plate Plate Plate SA–612 SA–612 SA–738 ... ... B K02900 ... K02900 ... K12007 ... /2 < t ≤ 1 ≤1/2 ... 18 19 20 21 Carbon Carbon Carbon Carbon Forgings Plate Plate Plate SA–372 SA–724 SA–724 SA–724 C A C B K04801 K11831 K12037 K12031 22 23 24 C–Mn–Si–Cb C–Mn–Si–Cb C–Mn–Si–Cb Plate Plate Plate SA–737 SA/AS 1548 SA/AS 1548 B PT490N PT490NR K12001 ... ... ... Normalized ≤6 ... Norm. rld. ≤6 25 26 27 28 C–Mn–Si–Cb C–Mn–Si–Cb C–Mn–Si–Cb C–Mn–Si–V Plate Plate Plate Plate SA/GB 713 SA/GB 713 SA/GB 713 SA–737 Q370R Q370R Q370R C ... ... ... K12202 Normalized Normalized Normalized ... 29 30 31 32 C–Mn–Si–V–Cb C–Mn–Si–V–Cb C–Mn–Si–V–Cb C–Mn–Si–V–Cb Plate Plate Plate Plate SA–656 SA–656 SA–656 SA–656 T3 T7 T3 T7 ... ... ... ... 33 34 35 36 37 38 C–Mn–Si–V–Cb C–Mn–Si–V–Cb C–Mn–Si–V–Cb C–Mn–Si–V–Cb C–Mn–Ti C–Si–Ti Plate Plate Plate Plate Plate, sheet Forgings SA–656 SA–656 SA–656 SA–656 SA–562 SA–836 T3 T7 T3 T7 ... ... 39 40 41 C–0.3Mo C–0.3Mo C–0.3Mo Smls. tube Smls. tube Smls. tube 42 43 44 C–1/2Mo C–1/2Mo C–1/2Mo Smls. tube Wld. tube Wld. tube Line No. Nominal Composition ð15Þ steel steel steel steel Product Form Spec. No. 3 3 3 3 >1 ≤1 ... ≤21/2 1 1 1 1 3 3 3 3 ≤21/2 ≤21/2 ≤21/2 ≤21/2 ≤21/2 ≤4 1 1 1 1 1 1 3 3 3 3 3 3 1 10C 10C 1 1 1 3 ... ... ... ... ... 1 1 1 ... 4 4 4 1 1 1 2 2 2 1.5 < t ≤ 2.5 0.6 < t ≤ 1.5 0.4 ≤ t ≤ 0.6 ... 1 1 1 1 2 2 2 3 ... ... ... ... ≤2 ≤2 ≤11/2 ≤11/2 1 1 1 1 1 1 2 2 ... ... ... ... K11224 ... ... ... ... ... ... 1 ≤1 ≤1 ≤3/4 ≤3/4 ... ... 1 1 1 1 1 1 3 3 4 4 1 1 SA/EN 10216–2 16Mo3 SA/EN 10216–2 16Mo3 SA/EN 10216–2 16Mo3 ... ... ... ... ... ... 15/8 < t ≤ 21/2 5 /8 < t ≤ 15/8 t ≤5/8 3 3 3 1 1 1 SA–209 SA–250 SA–250 K11422 ... K11422 ... K11422 ... ... ... ... 3 3 3 1 1 1 T1b T1b T1b 26 t t t t ≤ ≤ ≤ ≤ 1 1 1 1 ... ... ... ... < < < < 4 4 4 4 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 75 75 75 75 50 55 55 55 NP NP NP NP NP 700 700 650 700 650 NP 650 650 650 NP 650 CS–5 CS–5 CS–5 CS–5 G23, G23, G26, G23, 5 6 7 8 80 80 80 80 45 47 50 55 800 800 NP NP NP NP NP NP 1000 1000 700 700 650 650 NP 650 CS–3 CS–3 CS–3 CS–5 G10, S1, T1 G10, S1, T1 ... G23, T1, W11 9 10 11 12 13 14 80 80 80 80 80 80 60 60 60 60 60 60 NP NP NP NP NP NP 700 700 700 700 650 NP 650 NP NP NP 650 650 650 NP NP NP 650 NP CS–5 CS–5 CS–5 CS–5 CS–5 CS–3 G23, S6, T1, S6, T1, W10, S6, T1, W10, S6, T1, W10, G23, W11 ... 15 16 17 81 83 85 50 50 60 NP NP NP 700 650 650 650 650 650 650 650 650 CS–3 CS–3 CS–5 T1 ... ... 18 19 20 21 90 90 90 95 55 70 70 75 NP NP NP NP NP NP NP NP 650 700 700 700 650 650 650 650 CS–3 CS–5 CS–5 CS–5 W11 ... ... ... 22 23 24 70 71 71 50 ... ... NP 1000 1000 700 NP NP 700 1000 1000 650 NP NP CS–3 CS–2 CS–2 T1 G10, G18, S1, T1 G10, G18, S1, T1 25 26 27 28 75.5 77 77 80 49.5 52 53.5 60 800 800 800 NP NP NP NP 700 NP NP NP 700 NP NP NP 650 CS–3 CS–3 CS–3 CS–3 T1 T1 T1 ... 29 30 31 32 60 60 70 70 50 50 60 60 NP NP NP NP NP NP NP NP NP NP NP NP 650 650 650 650 ... ... ... ... ... ... ... ... 33 34 35 36 37 38 80 80 90 90 71 55 70 70 80 80 30 25 NP NP NP NP NP NP NP NP NP NP NP NP NP NP NP NP 650 650 650 650 650 650 NP 650 ... ... ... ... CS–6 CS–1 ... ... ... ... G7 ... 39 40 41 65.5 65.5 65.5 37.5 39 40.5 1000 1000 1000 NP NP NP 1000 1000 1000 NP NP NP CS–2 CS–2 CS–2 G11, S2, T4 G11, S2, T4 G11, S2, T4 42 43 44 53 53 53 28 28 28 1000 1000 1000 NP NP NP 1000 NP 1000 650 NP 650 CS–1 CS–1 CS–1 G11, S3, T5 G11, S2, T5, W13 G3, G11, G24, S2, T5 27 Notes T1, W11 T1, W11 T1, W10, W12 W11 W10, W11, W12 W12 W12 W12 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 21.4 21.4 21.4 21.4 ... ... ... ... 21.4 21.4 21.4 21.4 ... ... ... ... 21.1 21.1 21.1 21.1 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 18.3 19.6 19.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 22.9 22.9 22.9 22.9 22.9 22.9 ... ... 22.9 22.9 22.9 22.9 ... ... ... ... 22.9 22.9 22.9 22.6 22.9 22.9 22.6 22.3 22.9 22.9 22.6 22.3 22.9 22.9 22.6 22.3 22.2 22.9 22.5 22.3 19.6 19.6 22.2 19.6 15.7 15.7 ... ... 12.6 12.6 ... ... 9.3 9.3 ... ... 6.7 6.7 ... ... 9 10 11 12 13 14 22.9 22.9 22.9 22.9 22.9 22.9 ... ... ... ... ... 22.9 22.9 22.9 22.9 22.9 22.9 22.9 ... ... ... ... ... 22.9 22.6 22.6 22.6 22.6 22.6 22.9 22.3 22.3 22.3 22.3 22.3 22.9 22.3 22.3 22.3 22.3 22.3 22.9 22.3 22.3 22.3 22.3 22.3 22.9 22.3 22.3 22.3 22.3 22.3 22.9 19.6 19.6 19.6 19.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 23.1 23.7 24.3 ... ... 24.3 23.1 23.7 24.3 ... ... 24.3 22.8 23.4 24.3 22.6 23.2 24.3 22.6 23.2 24.3 22.5 22.5 24.1 22.0 22.0 23.7 19.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... 18 19 20 21 25.7 25.7 25.7 27.1 25.7 25.7 25.7 27.1 25.7 25.7 25.7 27.1 25.7 25.6 25.6 27.0 25.7 25.4 25.4 26.8 25.7 25.1 25.1 26.5 25.7 25.1 25.1 26.5 25.7 25.1 25.1 26.5 24.4 24.4 24.4 24.4 ... 21.9 21.9 23.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 20.0 20.3 20.3 20.0 20.3 20.3 20.0 20.3 20.3 ... 20.3 20.3 20.0 20.3 20.3 20.0 20.3 20.3 20.0 20.3 20.3 20.0 20.3 20.3 20.0 20.3 20.3 19.6 18.3 18.3 ... 14.8 14.8 ... 12.0 12.0 ... 9.3 9.3 ... 6.7 6.7 25 26 27 28 21.5 22.0 22.0 22.9 ... ... ... ... 21.5 22.0 22.0 22.9 ... ... ... ... 21.5 22.0 22.0 22.9 21.5 22.0 22.0 22.9 21.5 22.0 22.0 22.9 21.5 22.0 22.0 22.9 21.5 22.0 22.0 22.9 19.6 19.6 19.6 20.0 15.7 15.7 15.7 ... 12.6 12.6 12.6 ... ... ... ... ... ... ... ... ... 29 30 31 32 17.1 17.1 20.0 20.0 ... ... ... ... 17.1 17.1 20.0 20.0 ... ... ... ... 17.1 17.1 20.0 20.0 17.1 17.1 20.0 20.0 17.1 17.1 20.0 20.0 17.1 17.1 20.0 20.0 17.1 17.1 20.0 20.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 36 37 38 22.9 22.9 25.7 25.7 12.9 15.7 ... ... ... ... ... ... 22.9 22.9 25.7 25.7 11.5 14.3 ... ... ... ... ... ... 22.9 22.9 25.7 25.7 10.6 13.3 22.9 22.9 25.7 25.7 10.4 13.0 22.9 22.9 25.7 25.7 10.4 13.0 22.9 22.9 25.7 25.7 10.4 12.9 22.9 22.9 25.7 25.7 10.4 12.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 18.6 18.6 18.6 ... ... ... 18.6 18.6 18.6 ... ... ... 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.2 18.2 18.2 13.7 13.7 13.7 42 43 44 15.1 15.1 12.9 15.1 ... 12.9 15.1 15.1 12.9 ... ... ... 15.1 15.1 12.9 15.1 15.1 12.9 15.1 15.1 12.9 15.1 15.1 12.9 15.0 15.0 12.7 14.7 14.7 12.5 14.3 14.3 12.2 14.0 14.0 11.9 13.5 13.5 11.5 13.0 13.0 11.1 28 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 4.0 4.0 ... ... 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 13 14 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 18 19 20 21 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 ... 4.0 4.0 ... 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 36 37 38 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 8.2 8.2 8.2 4.8 4.8 4.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 42 43 44 8.2 8.2 7.0 4.8 4.8 4.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 5 6 C–1/2Mo C–1/2Mo C–1/2Mo C–1/2Mo C–1/2Mo C–1/2Mo Smls. tube SA–209 Smls. & wld. fittings SA–234 Wld. tube SA–250 Wld. tube SA–250 Smls. pipe SA–335 Forged pipe SA–369 T1 WP1 T1 T1 P1 FP1 K11522 K12821 K11522 K11522 K11522 K11522 ... ... ... ... ... ... ... ... ... ... ... ... 3 3 3 3 3 3 1 1 1 1 1 1 7 8 9 C–1/2Mo C–1/2Mo C–1/2Mo Smls. tube Wld. tube Wld. tube SA–209 SA–250 SA–250 T1a T1a T1a K12023 ... K12023 ... K12023 ... ... ... ... 3 3 3 1 1 1 10 11 12 C–1/2Mo C–1/2Mo C–1/2Mo Castings Castings Cast pipe SA–217 SA–352 SA–426 WC1 LC1 CP1 J12524 ... J12522 ... J12521 ... ... ... ... 3 3 3 1 1 1 13 14 15 16 C–1/2Mo C–1/2Mo C–1/2Mo C–1/2Mo Plate Wld. pipe Wld. pipe Wld. pipe SA–204 SA–672 SA–691 SA–691 A L65 CM–65 CM–65 K11820 K11820 K11820 K11820 ... ... ... ... ... ... ... ... 3 3 3 3 1 1 1 1 17 18 19 20 21 22 C–1/2Mo C–1/2Mo C–1/2Mo C–1/2Mo C–1/2Mo C–1/2Mo Forgings Plate Forgings Wld. pipe Wld. pipe Wld. pipe SA–182 SA–204 SA–336 SA–672 SA–691 SA–691 F1 B F1 L70 CM–70 CM–70 K12822 K12020 K12520 K12020 K12020 K12020 ... ... ... ... ... ... ... ... ... ... ... ... 3 3 3 3 3 3 2 2 2 2 2 2 23 24 25 26 C–1/2Mo C–1/2Mo C–1/2Mo C–1/2Mo Plate Wld. pipe Wld. pipe Wld. pipe SA–204 SA–672 SA–691 SA–691 C L75 CM–75 CM–75 K12320 K12320 K12320 K12320 ... ... ... ... ... ... ... ... 3 3 3 3 2 2 2 2 27 28 29 30 31 1 /2Cr–1/5Mo /2Cr–1/5Mo 1 /2Cr–1/5Mo–V 1 /2Cr–1/4Mo–Si 1 /2Cr–1/4Mo–Si Forgings Forgings Plate Plate Forgings SA–372 SA–372 SA–517 SA–517 SA–592 G H B A A K13049 K13547 K11630 K11856 K11856 70 70 ... ... ... ... ... ≤11/4 ≤11/4 ≤21/2 ... ... 11B 11B 11B ... ... 4 1 1 32 33 34 35 36 1 /2Cr–1/2Mo /2Cr–1/2Mo 1 /2Cr–1/2Mo 1 /2Cr–1/2Mo 1 /2Cr–1/2Mo Smls. pipe Forged pipe Plate Wld. pipe Wld. pipe SA–335 SA–369 SA–387 SA–691 SA–691 P2 FP2 2 1 /2CR 1 /2CR K11547 K11547 K12143 K12143 K12143 ... ... 1 ... ... ... ... ... ... ... 3 3 3 3 3 1 1 1 1 1 37 38 39 40 1 /2Cr–1/2Mo /2Cr–1/2Mo 1 /2Cr–1/2Mo 1 /2Cr–1/2Mo Smls. tube Wld. tube Wld. tube Cast pipe SA–213 SA–250 SA–250 SA–426 T2 T2 T2S1 CP2 K11547 K11547 K11547 J11547 ... ... ... ... ... ... ... ... 3 3 3 3 1 1 1 1 41 42 43 44 45 1 Forgings Plate Wld. pipe Plate Plate SA–182 SA–387 SA–691 SA–202 SA–202 F2 2 1 /2CR A B K12122 K12143 K12143 K11742 K12542 ... 2 ... ... ... ... ... ... ... ... 3 3 3 4 4 2 2 2 1 1 Line No. Nominal Composition 1 1 1 /2Cr–1/2Mo /2Cr–1/2Mo 1 /2Cr–1/2Mo 1 /2Cr–11/4Mn–Si 1 /2Cr–11/4Mn–Si 1 Product Form Spec. No. 30 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 55 55 55 55 55 55 30 30 30 30 30 30 1000 1000 1000 1000 1000 1000 NP 700 NP NP 700 700 1000 1000 NP 1000 1000 1000 650 650 NP 650 650 650 CS–2 CS–2 CS–2 CS–2 CS–2 CS–2 G11, S3, G11, T4, G11, S2, G3, G11, G11, S2, G11, S2, 7 8 9 60 60 60 32 32 32 1000 1000 1000 NP NP NP 1000 NP 1000 650 NP 650 CS–2 CS–2 CS–2 G11, S3, T4 G11, S2, T4, W13 G3, G11, G24, S2, T4 10 11 12 65 65 65 35 35 35 1000 NP NP 700 700 700 1000 650 NP 650 650 NP CS–2 CS–2 CS–2 G1, G11, G17, S2, T4 G1, G17 G17 13 14 15 16 65 65 65 65 37 37 37 37 1000 NP NP NP 700 700 700 300 (Cl. 3 only) 1000 NP NP NP 650 NP NP NP CS–2 CS–2 CS–2 CS–2 G11, G26, G26, G27, S2, T4 W10, W12 W10, W12 W10, W12 17 18 19 20 21 22 70 70 70 70 70 70 40 40 40 40 40 40 1000 1000 1000 NP NP NP 700 700 700 700 700 300 (Cl. 3 only) 1000 1000 1000 NP NP NP 650 650 650 NP NP NP CS–2 CS–2 CS–2 CS–2 CS–2 CS–2 G11, G11, G11, G26, G26, G27, S2, T4 S2, T4 S2, T4 W10, W12 W10, W12 W10, W12 23 24 25 26 75 75 75 75 43 43 43 43 1000 NP NP NP 700 700 700 300 (Cl. 3 only) 1000 NP NP NP 650 NP NP NP CS–2 CS–2 CS–2 CS–2 G11, G26, G26, G27, S2, T4, W12 W10, W12 W10, W12 W10, W12 27 28 29 30 31 120 120 115 115 115 70 70 100 100 100 NP NP NP NP NP NP NP 650 (SPT) 650 (SPT) 650 (SPT) 200 200 650 650 650 200 200 650 650 650 CS–3 CS–3 HT–1 HT–1 HT–1 W11 W11 ... ... ... 32 33 34 35 36 55 55 55 55 55 30 30 33 33 33 1000 1000 1000 NP NP 700 700 700 700 300 (Cl. 3 only) 1000 1000 1000 NP NP 650 650 650 NP NP CS–2 CS–2 CS–2 CS–2 CS–2 T5 T5 T5 G26, W10, W12 G27, W10, W12 37 38 39 40 60 60 60 60 30 30 30 30 1000 1000 1000 NP 700 NP NP 700 1000 NP NP NP 650 NP NP NP CS–2 CS–2 CS–2 CS–2 T5 G3, T5 T5, W13 G17 41 42 43 44 45 70 70 70 75 85 40 45 45 45 47 1000 NP NP 1000 1000 NP 700 700 NP NP 1000 1000 NP 1000 1000 650 650 NP NP NP CS–2 CS–3 CS–3 CS–3 CS–3 T5 T5 G26, W10, W12 S1, T2 S1, T2 31 Notes T4 W14 T4, W13 G24, S2, T4 T4 T4 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 15.7 15.7 15.7 13.4 15.7 15.7 15.7 15.7 ... 13.4 15.7 15.7 15.7 15.7 15.7 13.4 15.7 15.7 ... ... ... ... ... ... 15.7 15.7 15.7 13.4 15.7 15.7 15.7 15.7 15.7 13.4 15.7 15.7 15.7 15.7 15.7 13.4 15.7 15.7 15.7 15.7 15.7 13.4 15.7 15.7 15.7 15.7 15.7 13.4 15.7 15.7 15.7 15.7 15.7 13.4 15.7 15.7 15.4 15.4 15.4 13.1 15.4 15.4 14.9 14.9 14.9 12.7 14.9 14.9 14.5 14.5 14.5 12.3 14.5 14.5 13.7 13.7 13.7 11.6 13.7 13.7 7 8 9 17.1 17.1 14.6 ... ... ... 17.1 17.1 14.6 ... ... ... 17.1 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 16.8 16.8 14.3 16.4 16.4 13.9 15.9 15.9 13.6 15.4 15.4 13.1 13.7 13.7 11.6 10 11 12 18.6 18.6 18.6 ... ... ... 18.6 18.6 18.6 ... ... ... 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.4 18.4 18.4 17.9 ... ... 17.4 ... ... 16.9 ... ... 13.7 ... ... 13 14 15 16 18.6 18.6 18.6 18.6 ... ... ... ... 18.6 18.6 18.6 18.6 ... ... ... ... 18.6 18.6 18.6 18.6 18.6 18.6 18.6 ... 18.6 18.6 18.6 ... 18.6 18.6 18.6 ... 18.6 18.6 18.6 ... 18.6 18.6 18.6 ... 18.6 ... ... ... 18.4 ... ... ... 17.9 ... ... ... 13.7 ... ... ... 17 18 19 20 21 22 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 ... 20.0 20.0 20.0 20.0 20.0 ... 20.0 20.0 20.0 20.0 20.0 ... 20.0 20.0 20.0 20.0 20.0 ... 20.0 20.0 20.0 20.0 20.0 ... 20.0 20.0 20.0 ... ... ... 19.9 19.9 19.9 ... ... ... 19.3 19.3 19.3 ... ... ... 13.7 13.7 13.7 ... ... ... 23 24 25 26 21.4 21.4 21.4 21.4 ... ... ... ... 21.4 21.4 21.4 21.4 ... ... ... ... 21.4 21.4 21.4 21.4 21.4 21.4 21.4 ... 21.4 21.4 21.4 ... 21.4 21.4 21.4 ... 21.4 21.4 21.4 ... 21.4 21.4 21.4 ... 21.4 ... ... ... 21.4 ... ... ... 20.7 ... ... ... 13.7 ... ... ... 27 28 29 30 31 34.3 34.3 32.9 32.9 32.9 ... ... ... ... ... 34.3 34.3 32.9 32.9 32.9 ... ... 32.9 32.9 ... ... ... 32.9 32.9 32.9 ... ... 32.9 32.9 32.9 ... ... 32.9 32.9 32.9 ... ... 32.9 32.9 32.9 ... ... 32.8 32.8 32.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 36 15.7 15.7 15.7 15.7 15.7 ... ... ... ... ... 15.7 15.7 15.7 15.7 15.7 ... ... ... ... ... 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 ... 15.7 15.7 15.7 15.7 ... 15.7 15.7 15.7 15.7 ... 15.7 15.7 15.7 15.7 ... 15.7 15.7 15.7 15.7 ... 15.4 15.4 15.7 ... ... 14.9 14.9 15.7 ... ... 14.5 14.5 15.3 ... ... 13.9 13.9 14.3 ... ... 37 38 39 40 17.1 14.5 17.1 17.1 ... ... ... ... 17.1 14.5 17.1 17.1 ... ... ... ... 17.1 14.5 17.1 17.1 17.1 14.5 17.1 17.1 16.9 14.4 16.9 16.9 16.4 13.9 16.4 16.4 16.1 13.7 16.1 16.1 15.7 13.3 15.7 15.7 15.4 13.1 15.4 ... 14.9 12.7 14.9 ... 14.5 12.3 14.5 ... 13.9 11.8 13.9 ... 41 42 43 44 45 20.0 20.0 20.0 21.4 24.3 ... 20.0 ... ... 24.3 20.0 20.0 20.0 21.4 24.3 ... ... ... ... ... 20.0 20.0 20.0 21.4 24.3 20.0 20.0 20.0 21.4 24.3 20.0 20.0 20.0 21.4 24.3 20.0 20.0 20.0 21.4 23.5 20.0 20.0 20.0 21.4 22.4 20.0 20.0 20.0 20.2 21.1 20.0 20.0 ... 15.7 17.7 19.9 20.0 ... 12.0 12.0 19.3 19.5 ... 7.8 7.8 18.6 18.6 ... 5.0 5.0 32 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 8.2 8.2 8.2 7.0 8.2 8.2 4.8 4.8 4.8 4.1 4.8 4.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 8.2 8.2 7.0 4.8 4.8 4.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 8.2 ... ... 4.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16 8.2 ... ... ... 4.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 21 22 8.2 8.2 8.2 ... ... ... 4.8 4.8 4.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 8.2 ... ... ... 4.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 31 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 36 9.2 9.2 9.2 ... ... 5.9 5.9 5.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 9.2 7.8 9.2 ... 5.9 5.0 5.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 45 9.2 9.2 ... 3.0 3.0 5.9 5.9 ... 1.5 1.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 3 /4Cr–1/2Ni–Cu 3 /4Cr–1/2Ni–Cu 3 /4Cr–3/4Ni–Cu–Al Smls. & wld. tube Wld. tube Pipe SA–423 SA–423 SA–333 1 1 4 K11535 ... K11535 ... K11267 ... ... ... ... 4 4 4 2 2 2 4 5 6 7 8 9 1Cr–1/5Mo 1Cr–1/5Mo 1Cr–1/5Mo 1Cr–1/5Mo 1Cr–1/5Mo 1Cr–1/5Mo Forgings Forgings Forgings Forgings Forgings Forgings SA–372 SA–372 SA–372 SA–372 SA–372 SA–372 E J E F J J K13047 K13548 K13047 G41350 K13548 G41370 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–1/2Mo Plate Wld. pipe Cast pipe SA–387 SA–691 SA–426 12 1CR CP12 K11757 1 K11757 ... J11562 ... ... ... ... 4 4 4 1 1 1 13 14 15 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–1/2Mo Forgings SA–182 Smls. tube SA–213 Smls. & wld. fittings SA–234 F12 T12 WP12 K11562 1 K11562 ... K12062 1 ... ... ... 4 4 4 1 1 1 16 17 18 19 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–1/2Mo Wld. tube Wld. tube Smls. pipe Forged pipe SA–250 SA–250 SA–335 SA–369 T12 T12S1 P12 FP12 K11562 K11562 K11562 K11562 ... ... ... ... ... ... ... ... 4 4 4 4 1 1 1 1 20 21 22 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–1/2Mo Forgings Plate Plate SA/EN 10222–2 13CrMo4–5 SA/EN 10028–2 13CrMo4–5 SA/EN 10028–2 13CrMo4–5 ... ... ... NT or QT ... ... 10 < t ≤ 20 6 < t ≤ 10 4<t≤6 4 4 4 1 1 1 23 24 25 26 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–1/2Mo Plate Forgings Plate Forgings SA/GB SA/EN SA/EN SA/EN 713 10222–2 10028–2 10222–2 15CrMoR 13CrMo4–5 13CrMo4–5 13CrMo4–5 ... ... ... ... ... NT or QT ... NT or QT 4<t≤6 4 < t ≤ 10 2.5 < t ≤ 4 2.8 < t ≤ 4 4 4 4 4 1 1 1 1 27 28 29 30 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–1/2Mo Smls. tube Forgings Smls. tube Forgings SA/EN SA/EN SA/EN SA/EN 10216–2 10222–2 10216–2 10222–2 13CrMo4–5 13CrMo4–5 13CrMo4–5 13CrMo4–5 ... ... ... ... ... NT ... NT 15/8 < t ≤ 21/2 1.4 < t ≤ 2.8 t ≤ 15/8 t ≤ 1.4 4 4 4 4 1 1 1 1 31 32 33 34 35 36 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–1/2Mo Plate Wld. pipe Plate Plate Plate Plate SA–387 SA–691 SA/GB 713 SA/EN 10028–2 SA/GB 713 SA/EN 10028–2 12 1CR 15CrMoR 13CrMo4–5 15CrMoR 13CrMo4–5 K11757 K11757 ... ... ... ... 2 ... ... ... ... ... ... ... 2.5 < t ≤ 4 5 /8 < t ≤ 2.5 0.25 ≤ t ≤ 2.5 t ≤5/8 4 4 4 4 4 4 1 1 1 1 1 1 37 38 39 1Cr–1/2Mo 1Cr–1/2Mo 1Cr–V Forgings Forgings Smls. tube SA–182 SA–336 SA–213 F12 F12 T17 K11564 2 K11564 ... K12047 ... ... ... ... 4 4 10B 1 1 1 40 41 42 11/4Cr–1/2Mo 11/4Cr–1/2Mo 11/4Cr–1/2Mo Castings Cast pipe Bar SA–217 SA–426 SA–739 WC6 CP11 B11 J12072 ... J12072 ... K11797 ... ... ... ... 4 4 4 1 1 1 Line No. Nominal Composition ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ Product Form Spec. No. 34 65 65 70 70 70 110 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 60 60 60 37 37 35 700 700 NP NP NP 700 650 650 650 NP NP NP CS–2 CS–2 CS–2 W13, W14 G3, G24 ... 4 5 6 7 8 9 105 105 120 120 120 135 65 65 70 70 70 110 NP NP NP NP NP NP NP NP NP NP NP NP 650 650 650 650 650 650 650 650 650 650 650 650 CS–2 CS–2 CS–5 CS–5 CS–5 HT–1 W11 W11 W11 W11 W11 W11 10 11 12 55 55 60 33 33 30 1200 NP NP 700 700 700 1200 NP NP NP NP NP CS–2 CS–2 CS–2 S4, T5 G26, W10, W12 G17 13 14 15 60 60 60 32 32 32 1200 1200 1200 NP 700 700 1200 1200 1200 NP NP NP CS–2 CS–2 CS–2 T5 S4, T5 S4, T5, W14 16 17 18 19 60 60 60 60 32 32 32 32 1200 1200 1200 1200 NP NP 700 700 NP NP 1200 1200 NP NP NP NP CS–2 CS–2 CS–2 CS–2 G3, S4, S4, S4, 20 21 22 61 61 62.5 35 35.5 37 1200 1200 1200 NP NP NP 1200 1200 1200 NP NP NP CS–2 CS–2 CS–2 S4, T5 S4, T5 S4, T5 23 24 25 26 64 64 64 64 32.5 38.5 39 40 1200 1200 1200 1200 NP NP NP NP NP 1200 1200 1200 NP NP NP NP CS–2 CS–2 CS–2 CS–2 H3, S4, S4, S4, 27 28 29 30 64 64 64 64 40.5 41.5 42 43 1200 1200 1200 1200 NP NP NP NP 1200 1200 1200 1200 NP NP NP NP CS–2 CS–2 CS–2 CS–2 T5 S4, T5 T5 S4, T5 31 32 33 34 35 36 65 65 65.5 65.5 65.5 65.5 40 40 40 42 43 43.5 1200 NP 1200 1200 1200 1200 700 700 NP NP NP NP 1200 NP NP 1200 NP 1200 NP NP NP NP NP NP CS–2 CS–2 CS–2 CS–2 CS–2 CS–2 S4, T5 G26, W10, W12 H3, S4, T5 S4, T5 H3, S4, T5 S4, T5 37 38 39 70 70 60 40 40 30 1200 1200 NP 700 700 NP 1200 1200 650 NP NP 650 CS–2 CS–2 CS–2 S4, T4 S4, T4 ... 40 41 42 70 70 70 40 40 45 1100 NP NP 700 700 700 1100 NP 1200 NP NP NP CS–2 CS–2 CS–3 G1, G17, T4 G17 T4 35 Notes S4, T5 T5, W13 T5 T5 S4, T5 T5 T5 T5 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 17.1 14.6 17.1 ... ... 17.1 17.1 14.6 17.1 ... ... ... 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 17.1 17.1 14.6 17.1 ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 7 8 9 30.0 30.0 34.3 34.3 34.3 38.5 ... ... 34.3 ... ... ... 30.0 30.0 34.3 33.3 34.3 36.9 ... ... ... ... ... ... 30.0 30.0 34.3 32.6 34.3 36.7 30.0 30.0 34.3 32.3 34.3 36.5 30.0 30.0 34.3 32.2 34.3 36.1 30.0 30.0 34.3 31.8 34.3 35.9 29.8 29.8 34.1 30.6 34.1 34.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 15.7 15.7 17.1 ... ... ... 15.4 15.4 16.8 ... ... ... 15.1 15.1 16.5 15.1 15.1 16.2 15.1 15.1 15.7 15.1 15.1 15.2 15.1 15.1 15.0 15.1 15.1 14.8 15.1 ... ... 15.1 ... ... 15.1 ... ... 14.7 ... ... 13 14 15 17.1 17.1 17.1 17.1 ... ... 16.8 16.8 16.8 ... ... ... 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.3 16.3 16.3 16.0 16.0 16.0 15.8 15.8 15.8 15.5 15.5 15.5 15.3 15.3 15.3 14.9 14.9 14.9 14.5 14.5 14.5 16 17 18 19 14.5 17.1 17.1 17.1 14.5 17.1 ... ... 14.3 16.8 16.8 16.8 ... ... ... ... 14.0 16.5 16.5 16.5 14.0 16.5 16.5 16.5 14.0 16.5 16.5 16.5 13.8 16.3 16.3 16.3 13.6 16.0 16.0 16.0 13.4 15.8 15.8 15.8 13.2 15.5 15.5 15.5 13.0 15.3 15.3 15.3 12.7 14.9 14.9 14.9 12.3 14.5 14.5 14.5 20 21 22 17.4 17.4 17.8 ... 17.2 17.7 17.2 17.1 17.5 ... 16.9 17.3 16.7 16.8 17.2 16.6 16.8 17.2 16.6 16.7 17.1 16.6 16.7 17.1 16.6 16.7 17.1 16.6 16.7 17.1 16.6 16.7 17.1 16.6 16.7 17.1 16.3 16.5 17.0 15.8 16.1 16.7 23 24 25 26 18.2 18.2 18.2 18.2 ... ... 18.1 ... 17.9 18.0 17.9 18.0 ... ... 17.7 ... 17.6 17.5 17.6 17.5 17.6 17.4 17.6 17.4 17.1 17.4 17.5 17.4 16.6 17.4 17.5 17.4 16.4 17.4 17.5 17.4 16.1 17.4 17.5 17.4 15.9 17.4 17.5 17.4 15.5 17.4 17.5 17.4 15.2 17.3 17.4 17.3 14.8 16.9 17.1 16.9 27 28 29 30 18.2 18.2 18.2 18.2 ... ... ... ... 18.2 18.0 18.2 18.0 ... ... ... ... 18.2 17.5 18.2 17.5 18.2 17.4 18.2 17.4 18.2 17.4 18.2 17.4 18.2 17.4 18.2 17.4 18.2 17.4 18.2 17.4 18.2 17.4 18.2 17.4 18.2 17.4 18.2 17.4 18.2 17.4 18.2 17.4 17.7 17.3 17.7 17.3 17.0 16.9 17.0 16.9 31 32 33 34 35 36 18.6 18.6 18.6 18.6 18.6 18.6 18.6 ... ... 18.5 ... 18.5 18.2 18.2 18.3 18.3 18.3 18.3 ... ... ... 18.1 ... 18.1 17.9 17.9 18.0 18.0 18.0 18.0 17.9 17.9 18.0 18.0 18.0 18.0 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 ... 17.9 17.9 17.9 17.9 17.9 ... 17.9 17.9 17.9 17.9 17.9 ... 17.7 17.8 17.7 17.8 17.4 ... 17.1 17.5 17.1 17.5 37 38 39 20.0 20.0 17.1 ... 20.0 17.1 19.6 19.6 17.1 ... ... ... 19.2 19.2 17.1 19.2 19.2 16.8 19.2 19.2 16.2 19.2 19.2 15.7 19.2 19.2 15.4 19.2 19.2 ... 19.2 19.2 ... 19.1 19.1 ... 18.6 18.6 ... 18.0 18.0 ... 40 41 42 20.0 20.0 20.0 ... ... 20.0 20.0 20.0 20.0 ... ... ... 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 19.7 ... 20.0 19.2 ... 20.0 18.7 ... 19.4 13.7 ... 13.7 36 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 7 8 9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 11.3 ... ... 7.2 ... ... 4.5 ... ... 2.8 ... ... 1.8 ... ... 1.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 11.3 11.3 11.3 7.2 7.2 7.2 4.5 4.5 4.5 2.8 2.8 2.8 1.8 1.8 1.8 1.1 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 9.6 11.3 11.3 11.3 6.1 7.2 7.2 7.2 3.8 4.5 4.5 4.5 2.4 2.8 2.8 2.8 1.5 1.8 1.8 1.8 0.94 1.1 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 11.3 11.3 11.3 7.2 7.2 7.2 4.5 4.5 4.5 2.8 2.8 2.8 1.8 1.8 1.8 1.1 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 11.3 11.3 11.3 11.3 7.2 7.2 7.2 7.2 4.5 4.5 4.5 4.5 2.8 2.8 2.8 2.8 1.8 1.8 1.8 1.8 1.1 1.1 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 11.3 11.3 11.3 11.3 7.2 7.2 7.2 7.2 4.5 4.5 4.5 4.5 2.8 2.8 2.8 2.8 1.9 1.8 1.9 1.8 1.2 1.1 1.2 1.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 35 36 11.3 ... 11.3 11.3 11.3 11.3 7.2 ... 7.2 7.2 7.2 7.2 4.5 ... 4.5 4.5 4.5 4.5 2.8 ... 2.8 2.8 2.8 2.8 1.8 ... 1.8 1.8 1.8 1.8 1.1 ... 1.1 1.1 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 11.3 11.3 ... 7.2 7.2 ... 4.5 4.5 ... 2.8 2.8 ... 1.8 1.8 ... 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 40 41 42 9.3 ... 9.3 6.3 ... 6.3 4.2 ... 4.2 2.8 ... 2.8 ... ... 1.9 ... ... 1.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 11/4Cr–1/2Mo–Si 11/4Cr–1/2Mo–Si 11/4Cr–1/2Mo–Si Forgings SA–182 Smls. tube SA–213 Smls. & wld. fittings SA–234 F11 T11 WP11 K11597 1 K11597 ... ... 1 ... ... ... 4 4 4 1 1 1 4 5 6 7 8 11/4Cr–1/2Mo–Si 11/4Cr–1/2Mo–Si 11/4Cr–1/2Mo–Si 11/4Cr–1/2Mo–Si 11/4Cr–1/2Mo–Si Wld. tube Wld. tube Smls. pipe Forgings Forged pipe SA–250 SA–250 SA–335 SA–336 SA–369 T11 T11S1 P11 F11 FP11 K11597 K11597 K11597 K11597 K11597 ... ... ... 1 ... ... ... ... ... ... 4 4 4 4 4 1 1 1 1 1 9 10 11 11/4Cr–1/2Mo–Si 11/4Cr–1/2Mo–Si 11/4Cr–1/2Mo–Si Plate Wld. pipe Wld. pipe SA–387 SA–691 SA–691 11 11/4CR 11/4CR K11789 1 K11789 ... K11789 ... ... ... ... 4 4 4 1 1 1 12 13 14 15 16 11/4Cr–1/2Mo–Si 11/4Cr–1/2Mo–Si 11/4Cr–1/2Mo–Si 11/4Cr–1/2Mo–Si 11/4Cr–1/2Mo–Si Forgings Forgings Forgings Plate Wld. pipe SA–182 SA–336 SA–336 SA–387 SA–691 F11 F11 F11 11 11/4CR K11572 K11572 K11572 K11789 K11789 2 2 3 2 ... ... ... ... ... ... 4 4 4 4 4 1 1 1 1 1 17 18 19 20 13/4Cr–1/2Mo–Cu 13/4Cr–1/2Mo–Cu 13/4Cr–1/2Mo–Ti 13/4Cr–1/2Mo–Ti Forgings Forgings Plate Plate SA–592 SA–592 SA–517 SA–517 E E E E K11695 K11695 K21604 K21604 ... ... ... ... 21/2 < t ≤ 4 ≤21/2 21/2 < t ≤ 6 ≤21/2 11B 11B 11B 11B 2 2 2 2 21 22 23 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo Forgings SA–182 Smls. tube SA–213 Smls. & wld. fittings SA–234 F22 T22 WP22 K21590 1 K21590 ... K21590 1 ... ... ... 5A 5A 5A 1 1 1 24 25 26 27 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo Wld. tube Wld. tube Smls. pipe Forgings SA–250 SA–250 SA–335 SA–336 T22 T22S1 P22 F22 K21590 K21590 K21590 K21590 ... ... ... 1 ... ... ... ... 5A 5A 5A 5A 1 1 1 1 28 29 30 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo Forged pipe Plate Wld. pipe SA–369 SA–387 SA–691 FP22 22 21/4CR K21590 ... K21590 1 K21590 ... ... ... ... 5A 5A 5A 1 1 1 31 32 33 34 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo Plate Forgings Plate Plate SA/EN SA/EN SA/EN SA/EN 10028–2 10222–2 10028–2 10028–2 10CrMo9–10 11CrMo9–10 10CrMo9–10 10CrMo9–10 ... ... ... ... ... NT or QT ... ... 6 < t ≤ 10 8 < t ≤ 20 4<t≤6 2.5 < t ≤ 4 5A 5A 5A 5A 1 1 1 1 35 36 37 38 39 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo Smls. tube Smls. tube Plate Castings Cast pipe SA/EN 10216–2 SA/EN 10216–2 SA/EN 10028–2 SA–217 SA–426 10CrMo9–10 10CrMo9–10 10CrMo9–10 WC9 CP22 ... ... ... J21890 J21890 ... ... ... ... ... 15/8 < t ≤ 21/2 t ≤ 15/8 t ≤ 2.5 ... ... 5A 5A 5A 5A 5A 1 1 1 1 1 40 41 42 43 44 45 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo Forgings Forgings Plate Wld. pipe Bar Forgings SA–182 SA–336 SA–387 SA–691 SA–739 SA/EN 10222–2 F22 F22 22 21/4CR B22 11CrMo9–10 K21590 K21590 K21590 K21590 K21390 ... 3 3 2 ... ... NT ... ... ... ... ... t≤8 5A 5A 5A 5A 5A 5A 1 1 1 1 1 1 Line No. Nominal Composition ð15Þ ð15Þ Product Form Spec. No. 38 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 60 60 60 30 30 30 1200 1200 1200 NP 700 700 1200 1200 1200 NP NP NP CS–2 CS–2 CS–2 S4, T5 S4, T5 S4, T5, W14 4 5 6 7 8 60 60 60 60 60 30 30 30 30 30 1200 1200 1200 1200 1200 NP NP 700 NP 700 NP NP 1200 NP 1200 NP NP NP NP NP CS–2 CS–2 CS–2 CS–2 CS–2 G3, S4, S4, S4, S4, 9 10 11 60 60 60 35 35 35 1200 NP NP 700 300 (Cl. 3 only) 700 1200 NP NP NP NP NP CS–2 CS–2 CS–2 S4, T4 G27, W10, W12 G26, W10, W12 12 13 14 15 16 70 70 75 75 75 40 40 45 45 45 1200 1200 NP 1200 NP 700 NP NP 700 700 1200 1200 1200 1200 NP NP NP NP NP NP CS–2 CS–2 CS–3 CS–3 CS–3 S4, T4 S4, T4 T3 S4, T3 G26, W10, W12 17 18 19 20 105 115 105 115 90 100 90 100 NP NP NP NP 650 (SPT) NP 700 (Cl. MC & SPT) 700 (Cl. MC & SPT) 650 650 650 650 650 650 650 650 CS–5 HT–1 CS–5 HT–1 S7 ... ... ... 21 22 23 60 60 60 30 30 30 1200 1200 1200 700 700 700 1200 1200 1200 NP NP NP CS–2 CS–2 CS–2 S4, T4, W7, W9 S4, T4, W7, W9 S4, T4, W7, W9, W14 24 25 26 27 60 60 60 60 30 30 30 30 1200 1200 1200 1200 NP NP 700 700 NP NP 1200 1200 NP NP NP NP CS–2 CS–2 CS–2 CS–2 G3, S4, S4, S4, 28 29 30 60 60 60 30 30 30 1200 1200 NP 700 700 700 1200 1200 NP NP NP NP CS–2 CS–2 CS–2 S4, T4, W7, W9 S4, T4, W7, W9 G26, W10, W12 31 32 33 34 65.5 65.5 66.5 68 36.5 38.5 37.5 40.5 1100 1200 1100 1100 NP NP NP NP 1100 1200 1100 1100 NP NP NP NP CS–3 CS–3 CS–3 CS–3 S4, S4, S4, S4, 35 36 37 38 39 69.5 69.5 69.5 70 70 39 40.5 ... 40 40 1200 1200 1100 1200 NP NP NP NP 700 700 1200 1200 1100 1200 NP NP NP NP NP NP CS–2 CS–2 CS–3 CS–2 CS–2 T4, W7, T4, W7, G18, S4, G1, G17, G17 40 41 42 43 44 45 75 75 75 75 75 75.5 45 45 45 45 45 45 1200 1200 1200 NP NP 1200 700 700 700 700 700 NP 1200 1200 1200 NP 1200 1200 NP NP NP NP NP NP CS–3 CS–3 CS–3 CS–3 CS–3 CS–3 S4, T4, W7, W9 S4, T4, W7, W9 S4, T4, W7, W9 G26, W10, W12 T4, W7 S4, T4, W7, W9 39 Notes S4, T5 T5, W13 T5 T5 T5 S4, T4, T4, T4, T4, T5, T4, T4, T4, W9, W7, W7, W7, W7, W7, W7, W9 W13 W9 W9 W9 W9 W9 W9 W9 W9 T4, W7, W9 S4, T4, W7, W9 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 17.1 17.1 17.1 ... ... ... 17.1 17.1 17.1 ... ... ... 17.1 17.1 17.1 16.8 16.8 16.8 16.2 16.2 16.2 15.7 15.7 15.7 15.4 15.4 15.4 15.1 15.1 15.1 14.8 14.8 14.8 14.4 14.4 14.4 14.0 14.0 14.0 13.6 13.6 13.6 4 5 6 7 8 14.5 17.1 17.1 17.1 17.1 ... ... ... ... ... 14.5 17.1 17.1 17.1 17.1 ... ... ... ... ... 14.5 17.1 17.1 17.1 17.1 14.3 16.8 16.8 16.8 16.8 13.8 16.2 16.2 16.2 16.2 13.3 15.7 15.7 15.7 15.7 13.1 15.4 15.4 15.4 15.4 12.8 15.1 15.1 15.1 15.1 12.6 14.8 14.8 14.8 14.8 12.2 14.4 14.4 14.4 14.4 11.9 14.0 14.0 14.0 14.0 11.6 13.6 13.6 13.6 13.6 9 10 11 17.1 17.1 17.1 ... ... ... 17.1 17.1 17.1 ... ... ... 17.1 17.1 17.1 17.1 ... 17.1 17.1 ... 17.1 17.1 ... 17.1 17.1 ... 17.1 17.1 ... 17.1 17.1 ... ... 16.8 ... ... 16.4 ... ... 13.7 ... ... 12 13 14 15 16 20.0 20.0 21.4 21.4 21.4 ... ... 21.4 ... ... 20.0 20.0 21.4 21.4 21.4 ... ... ... ... ... 20.0 20.0 21.4 21.4 21.4 20.0 20.0 21.4 21.4 21.4 20.0 20.0 21.4 21.4 21.4 20.0 20.0 21.4 21.4 21.4 20.0 20.0 21.4 21.4 21.4 20.0 20.0 21.4 21.4 21.4 19.7 19.7 21.4 21.4 ... 19.2 19.2 21.4 21.4 ... 18.7 18.7 20.2 20.2 ... 13.7 13.7 13.7 13.7 ... 17 18 19 20 30.0 32.9 30.0 32.9 ... ... ... ... 30.0 32.9 30.0 32.9 ... ... 30.0 32.9 30.0 32.9 30.0 32.9 30.0 32.9 30.0 32.9 30.0 32.9 30.0 32.9 30.0 32.9 30.0 32.9 30.0 32.9 30.0 32.9 ... ... 29.9 32.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 17.1 17.1 17.1 ... ... 17.1 17.1 17.1 17.1 ... ... ... 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 13.6 13.6 13.6 24 25 26 27 14.5 17.1 17.1 17.1 ... ... 17.1 17.1 14.5 17.1 17.1 17.1 ... ... ... ... 14.1 16.6 16.6 16.6 14.1 16.6 16.6 16.6 14.1 16.6 16.6 16.6 14.1 16.6 16.6 16.6 14.1 16.6 16.6 16.6 14.1 16.6 16.6 16.6 14.1 16.6 16.6 16.6 14.1 16.6 16.6 16.6 14.1 16.6 16.6 16.6 11.6 13.6 13.6 13.6 28 29 30 17.1 17.1 17.1 17.1 ... ... 17.1 17.1 17.1 ... ... ... 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 ... 16.6 16.6 ... 16.6 16.6 ... 13.6 13.6 ... 31 32 33 34 18.6 18.6 19.1 19.5 ... ... ... ... 18.6 18.6 19.1 19.5 ... ... ... ... 18.2 18.3 18.6 19.0 18.0 18.0 18.4 18.8 17.9 17.9 18.3 18.7 17.7 17.8 18.1 18.5 17.6 17.7 18.0 18.4 17.4 17.5 17.8 18.2 17.2 17.3 17.5 17.9 16.8 16.9 17.2 17.5 16.3 16.3 16.7 17.0 15.8 15.7 15.8 15.8 35 36 37 38 39 19.9 19.9 19.9 20.0 20.0 ... ... ... ... ... 19.9 19.9 19.9 20.0 20.0 ... ... ... ... ... 19.4 19.4 19.4 19.7 19.7 19.2 19.2 19.2 19.4 19.4 19.1 19.1 19.1 19.3 19.3 18.9 18.9 18.9 19.2 19.2 18.8 18.8 18.8 19.1 19.1 18.6 18.6 18.6 18.8 18.8 18.3 18.3 18.3 18.5 ... 17.9 17.9 17.9 17.9 ... 17.4 17.4 17.4 17.2 ... 15.8 15.8 15.8 15.8 ... 40 41 42 43 44 45 21.4 21.4 21.4 21.4 21.4 21.5 ... ... ... ... ... ... 21.4 21.4 21.4 21.4 21.4 21.5 ... ... ... ... ... ... 20.9 20.9 20.9 20.9 20.9 21.1 20.6 20.6 20.6 20.6 20.6 20.8 20.5 20.5 20.5 20.5 20.5 20.7 20.4 20.4 20.4 20.4 20.4 20.6 20.2 20.2 20.2 20.2 20.2 20.5 20.0 20.0 20.0 20.0 20.0 20.3 19.7 19.7 19.7 ... 19.7 19.9 19.3 19.3 19.3 ... 19.3 19.5 18.7 18.7 18.7 ... 18.7 18.9 15.8 15.8 15.8 ... 15.8 15.8 40 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 9.3 9.3 9.3 6.3 6.3 6.3 4.2 4.2 4.2 2.8 2.8 2.8 1.9 1.9 1.9 1.2 1.2 1.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 7 8 7.9 9.3 9.3 9.3 9.3 5.4 6.3 6.3 6.3 6.3 3.6 4.2 4.2 4.2 4.2 2.4 2.8 2.8 2.8 2.8 1.6 1.9 1.9 1.9 1.9 1.0 1.2 1.2 1.2 1.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 9.3 ... ... 6.3 ... ... 4.2 ... ... 2.8 ... ... 1.9 ... ... 1.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 12 13 14 15 16 9.3 9.3 9.3 9.3 ... 6.3 6.3 6.3 6.3 ... 4.2 4.2 4.2 4.2 ... 2.8 2.8 2.8 2.8 ... 1.9 1.9 1.9 1.9 ... 1.2 1.2 1.2 1.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 10.8 10.8 10.8 8.0 8.0 8.0 5.7 5.7 5.7 3.8 3.8 3.8 2.4 2.4 2.4 1.4 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 9.2 10.8 10.8 10.8 6.8 8.0 8.0 8.0 4.8 5.7 5.7 5.7 3.2 3.8 3.8 3.8 2.0 2.4 2.4 2.4 1.2 1.4 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 10.8 10.8 ... 8.0 8.0 ... 5.7 5.7 ... 3.8 3.8 ... 2.4 2.4 ... 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 11.4 11.4 11.4 11.4 7.8 7.8 7.8 7.8 5.1 5.1 5.1 5.1 3.2 3.2 3.2 3.2 ... 2.0 ... ... ... 1.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 38 39 11.4 11.4 11.4 11.4 ... 7.8 7.8 7.8 7.8 ... 5.1 5.1 5.1 5.1 ... 3.2 3.2 3.2 3.2 ... 2.0 2.0 ... 2.0 ... 1.2 1.2 ... 1.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 40 41 42 43 44 45 11.4 11.4 11.4 ... 11.4 11.4 7.8 7.8 7.8 ... 7.8 7.8 5.1 5.1 5.1 ... 5.1 5.1 3.2 3.2 3.2 ... 3.2 3.2 2.0 2.0 2.0 ... 2.0 2.0 1.2 1.2 1.2 ... 1.2 1.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 ð15Þ ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo 21/4Cr–1Mo Castings Forgings Forgings Plate SA–487 SA–508 SA–541 SA–542 8 22 22 B J22091 K21590 K21390 K21590 A 3 3 4 ... ... ... ... 5C 5C 5C 5C 1 1 1 1 5 6 7 8 9 21/4Cr–1Mo–V 21/4Cr–1Mo–V 21/4Cr–1Mo–V 21/4Cr–1Mo–V 21/4Cr–1Mo–V Forgings Forgings Forgings Plate Plate SA–182 SA–336 SA–541 SA–542 SA–832 F22V F22V 22V D 22V K31835 K31835 K31835 K31835 K31835 ... ... ... 4a ... ... ... ... ... ... 5C 5C 5C 5C 5C 1 1 1 1 1 10 11 12 3Cr–1Mo 3Cr–1Mo 3Cr–1Mo Smls. tube Smls. pipe Forgings SA–213 SA–335 SA–336 T21 P21 F21 K31545 ... K31545 ... K31545 1 ... ... ... 5A 5A 5A 1 1 1 13 14 15 3Cr–1Mo 3Cr–1Mo 3Cr–1Mo Forged pipe Plate Cast pipe SA–369 SA–387 SA–426 FP21 21 CP21 K31545 ... K31545 1 J31545 ... ... ... ... 5A 5A 5A 1 1 1 16 17 18 3Cr–1Mo 3Cr–1Mo 3Cr–1Mo Forgings Forgings Plate SA–182 SA–336 SA–387 F21 F21 21 K31545 ... K31545 3 K31545 2 ... ... ... 5A 5A 5A 1 1 1 19 20 21 22 23 24 3Cr–1Mo–1/4V–Ti–B 3Cr–1Mo–1/4V–Ti–B 3Cr–1Mo–1/4V–Ti–B 3Cr–1Mo–1/4V–Ti–B 3Cr–1Mo–1/4V–Ti–B 3Cr–1Mo–1/4V–Ti–B Forgings Forgings Forgings Forgings Plate Plate SA–182 SA–336 SA–508 SA–541 SA–542 SA–832 F3V F3V 3V 3V C 21V K31830 K31830 K31830 K31830 K31830 K31830 ... ... ... ... 4a ... ... ... ... ... ... ... 5C 5C 5C 5C 5C 5C 1 1 1 1 1 1 25 26 27 28 29 30 3Cr–1Mo–1/4V–Cb–Ca 3Cr–1Mo–1/4V–Cb–Ca 3Cr–1Mo–1/4V–Cb–Ca 3Cr–1Mo–1/4V–Cb–Ca 3Cr–1Mo–1/4V–Cb–Ca 3Cr–1Mo–1/4V–Cb–Ca Forgings Forgings Forgings Forgings Plate Plate SA–182 SA–336 SA–508 SA–541 SA–542 SA–832 F3VCb F3VCb 3VCb 3VCb E 23V ... ... ... ... ... ... ... ... ... ... 4a ... ... ... ... ... ... ... 5C 5C 5C 5C 5C 5C 1 1 1 1 1 1 31 32 33 5Cr–1/2Mo 5Cr–1/2Mo 5Cr–1/2Mo Smls. tube SA–213 Smls. & wld. fittings SA–234 Smls. pipe SA–335 T5 WP5 P5 K41545 ... K41545 ... K41545 ... ... ... ... 5B 5B 5B 1 1 1 34 35 36 37 5Cr–1/2Mo 5Cr–1/2Mo 5Cr–1/2Mo 5Cr–1/2Mo Forged pipe Plate Wld. pipe Forgings SA–369 SA–387 SA–691 SA–336 FP5 5 5CR F5 K41545 K41545 K41545 K41545 ... 1 ... ... ... ... ... ... 5B 5B 5B 5B 1 1 1 1 38 39 40 5Cr–1/2Mo 5Cr–1/2Mo 5Cr–1/2Mo Forgings Plate Forgings SA–182 SA–387 SA–336 F5 5 F5A K41545 ... K41545 2 K42544 ... ... ... ... 5B 5B 5B 1 1 1 41 42 43 5Cr–1/2Mo 5Cr–1/2Mo 5Cr–1/2Mo Castings Cast pipe Forgings SA–217 SA–426 SA–182 C5 CP5 F5a J42045 ... J42045 ... K42544 ... ... ... ... 5B 5B 5B 1 1 1 Line No. Nominal Composition Product Form Spec. No. 42 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 85 85 85 85 55 55 55 55 NP NP NP NP NP NP NP NP 1000 850 850 850 NP NP NP NP CS–3 CS–2 CS–2 CS–2 G1, T4, W7 ... ... ... 5 6 7 8 9 85 85 85 85 85 60 60 60 60 60 NP NP NP NP NP NP NP NP NP NP 900 900 900 900 900 NP NP NP NP NP CS–2 CS–2 CS–2 CS–2 CS–2 ... ... ... ... ... 10 11 12 60 60 60 30 30 30 1200 1200 1200 700 700 700 1200 1200 1200 NP NP NP CS–2 CS–2 CS–2 S4, T3 S4, T3 S4, T3 13 14 15 60 60 60 30 30 30 1200 1200 NP 700 700 700 1200 1200 NP NP NP NP CS–2 CS–2 CS–2 S4, T3 S4, T3 G17 16 17 18 75 75 75 45 45 45 1200 1200 1200 700 700 700 1200 1200 1200 NP NP NP CS–3 CS–3 CS–3 S4, T3 S4, T3 S4, T3 19 20 21 22 23 24 85 85 85 85 85 85 60 60 60 60 60 60 NP NP NP NP NP NP NP NP NP NP NP NP 900 900 900 900 900 900 NP NP NP NP NP NP CS–3 CS–3 CS–3 CS–3 CS–3 CS–3 ... ... ... ... ... ... 25 26 27 28 29 30 85 85 85 85 85 85 60 60 60 60 60 60 NP NP NP NP NP NP NP NP NP NP NP NP 900 900 900 900 900 900 NP NP NP NP NP NP CS–3 CS–3 CS–3 CS–3 CS–3 CS–3 ... ... ... ... ... ... 31 32 33 60 60 60 30 30 30 1200 1200 1200 700 700 700 1200 1200 1200 NP NP NP CS–2 CS–2 CS–2 T4 T4, W14 T4 34 35 36 37 60 60 60 60 30 30 30 36 1200 1200 NP 1200 700 700 700 NP 1200 1200 NP 1200 NP NP NP NP CS–2 CS–2 CS–2 CS–2 T4 T4 G26, W10, W12 T4 38 39 40 70 75 80 40 45 50 1200 NP 1200 700 700 NP 1200 1200 1200 NP NP NP CS–2 CS–3 CS–3 T3 T3 T3 41 42 43 90 90 90 60 60 65 1200 NP 1200 700 700 NP 1200 NP 1200 NP NP NP CS–3 CS–3 CS–5 G1, G17, T3 G17 T3 43 Notes This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 24.3 24.3 24.3 24.3 24.3 ... ... ... 24.3 24.3 24.3 24.3 ... ... ... ... 23.7 24.3 24.3 24.3 23.5 24.3 24.3 24.3 23.5 23.8 23.8 23.8 23.3 23.3 23.3 23.3 23.2 23.1 23.1 23.1 22.9 22.9 22.9 22.9 22.4 22.6 22.6 22.6 21.7 21.9 21.9 21.9 20.8 20.4 20.4 20.4 15.8 ... ... ... 5 6 7 8 9 24.3 24.3 24.3 24.3 24.3 ... ... ... ... ... 24.3 24.3 24.3 24.3 24.3 ... ... ... ... ... 24.3 24.3 24.3 24.3 24.3 24.3 24.3 24.3 24.3 24.3 24.3 24.3 24.3 24.3 24.3 23.7 23.7 23.7 23.7 23.7 23.2 23.2 23.2 23.2 23.2 22.8 22.8 22.8 22.8 22.8 22.2 22.2 22.2 22.2 22.2 21.6 21.6 21.6 21.6 21.6 21.0 21.0 21.0 21.0 21.0 20.3 20.3 20.3 20.3 20.3 10 11 12 17.1 17.1 17.1 ... 17.1 17.1 17.1 17.1 17.1 ... ... ... 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.0 16.0 16.0 12.0 12.0 12.0 13 14 15 17.1 17.1 17.1 ... ... ... 17.1 17.1 17.1 ... ... ... 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 16.6 ... 16.6 16.6 ... 16.0 16.0 ... 12.0 12.0 ... 16 17 18 21.4 21.4 21.4 ... ... ... 21.4 21.4 21.4 ... ... ... 20.9 20.9 20.9 20.6 20.6 20.6 20.5 20.5 20.5 20.4 20.4 20.4 20.2 20.2 20.2 20.0 20.0 20.0 19.7 19.7 19.7 19.3 19.3 19.3 18.1 18.1 18.1 13.1 13.1 13.1 19 20 21 22 23 24 24.3 24.3 24.3 24.3 24.3 24.3 ... ... ... ... ... ... 24.3 24.3 24.3 24.3 24.3 24.3 ... ... ... ... ... ... 23.3 23.3 23.3 23.3 23.3 23.3 22.6 22.6 22.6 22.6 22.6 22.6 22.2 22.2 22.2 22.2 22.2 22.2 21.8 21.8 21.8 21.8 21.8 21.8 21.6 21.6 21.6 21.6 21.6 21.6 21.4 21.4 21.4 21.4 21.4 21.4 21.1 21.1 21.1 21.1 21.1 21.1 20.8 20.8 20.8 20.8 20.8 20.8 20.4 20.4 20.4 20.4 20.4 20.4 20.0 20.0 20.0 20.0 20.0 20.0 25 26 27 28 29 30 24.3 24.3 24.3 24.3 24.3 24.3 ... ... ... ... ... ... 24.3 24.3 24.3 24.3 24.3 24.3 ... ... ... ... ... ... 23.3 23.3 23.3 23.3 23.3 23.3 22.6 22.6 22.6 22.6 22.6 22.6 22.2 22.2 22.2 22.2 22.2 22.2 21.8 21.8 21.8 21.8 21.8 21.8 21.6 21.6 21.6 21.6 21.6 21.6 21.4 21.4 21.4 21.4 21.4 21.4 21.1 21.1 21.1 21.1 21.1 21.1 20.8 20.8 20.8 20.8 20.8 20.8 20.4 20.4 20.4 20.4 20.4 20.4 20.0 20.0 20.0 20.0 20.0 20.0 31 32 33 17.1 17.1 17.1 ... ... ... 17.1 17.1 17.1 ... ... ... 16.6 16.6 16.6 16.5 16.5 16.5 16.4 16.4 16.4 16.2 16.2 16.2 15.9 15.9 15.9 15.6 15.6 15.6 15.1 15.1 15.1 14.5 14.5 14.5 13.8 13.8 13.8 10.9 10.9 10.9 34 35 36 37 17.1 17.1 17.1 17.1 ... ... ... ... 17.1 17.1 17.1 17.1 ... ... ... ... 16.6 16.6 16.6 16.6 16.5 16.5 16.5 16.5 16.4 16.4 16.4 16.4 16.2 16.2 16.2 16.2 15.9 15.9 15.9 15.9 15.6 15.6 15.6 15.6 15.1 15.1 ... 15.1 14.5 14.5 ... 14.5 13.8 13.8 ... 13.8 10.9 10.9 ... 10.9 38 39 40 20.0 21.4 22.9 ... ... ... 20.0 21.4 22.8 ... ... ... 19.4 20.8 22.1 19.2 20.6 22.0 19.2 20.5 21.9 18.9 20.2 21.6 18.6 19.9 21.3 18.2 19.5 20.8 17.6 18.9 20.2 17.0 18.2 19.1 14.3 14.3 14.3 10.9 10.9 10.9 41 42 43 25.7 25.7 25.7 ... ... ... 25.7 25.7 25.7 ... ... ... 24.9 24.9 24.9 24.7 24.7 24.7 24.6 24.6 24.6 24.3 24.3 24.3 23.9 23.9 23.9 23.4 23.4 23.4 22.7 ... 22.7 19.1 ... 19.1 14.3 ... 14.3 10.9 ... 10.9 44 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 11.4 ... ... ... 7.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 9.0 9.0 9.0 7.0 7.0 7.0 5.5 5.5 5.5 4.0 4.0 4.0 2.7 2.7 2.7 1.5 1.5 1.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 9.0 9.0 ... 7.0 7.0 ... 5.5 5.5 ... 4.0 4.0 ... 2.7 2.7 ... 1.5 1.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 9.5 9.5 9.5 6.8 6.8 6.8 4.9 4.9 4.9 3.2 3.2 3.2 2.4 2.4 2.4 1.3 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 23 24 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 29 30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 8.0 8.0 8.0 5.8 5.8 5.8 4.2 4.2 4.2 2.9 2.9 2.9 1.8 1.8 1.8 1.0 1.0 1.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 8.0 8.0 ... 8.0 5.8 5.8 ... 5.8 4.2 4.2 ... 4.2 2.9 2.9 ... 2.9 1.8 1.8 ... 1.8 1.0 1.0 ... 1.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 8.0 8.0 8.0 5.8 5.8 5.8 4.2 4.2 4.2 2.9 2.9 2.9 1.8 1.8 1.8 1.0 1.0 1.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 8.0 ... 8.0 5.8 ... 5.8 4.2 ... 4.2 2.9 ... 2.9 1.8 ... 1.8 1.0 ... 1.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 45 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) SA–213 SA–335 SA–213 SA–335 T5b P5b T5c P5c K51545 K51545 K41245 K41245 ... ... ... ... ... ... ... ... 5B 5B 5B 5B 1 1 1 1 Smls. tube Fittings Smls. pipe Forged pipe SA–213 SA–234 SA–335 SA–369 T9 WP9 P9 FP9 K90941 K90941 K90941 K90941 ... ... ... ... ... ... ... ... 5B 5B 5B 5B 1 1 1 1 9Cr–1Mo 9Cr–1Mo 9Cr–1Mo 9Cr–1Mo Forgings Forgings Castings Cast pipe SA–182 SA–336 SA–217 SA–426 F9 F9 C12 CP9 K90941 K90941 J82090 J82090 ... ... ... ... ... ... ... ... 5B 5B 5B 5B 1 1 1 1 13 14 15 16 9Cr–1Mo–V 9Cr–1Mo–V 9Cr–1Mo–V 9Cr–1Mo–V Forgings Forgings Smls. tube Smls. tube SA–182 SA–182 SA–213 SA–213 F91 F91 T91 T91 K90901 K90901 K90901 K90901 ... ... ... ... t t t t ≤ > ≤ > 3 3 3 3 15E 15E 15E 15E 1 1 1 1 17 18 19 20 9Cr–1Mo–V 9Cr–1Mo–V 9Cr–1Mo–V 9Cr–1Mo–V Fittings Fittings Smls. pipe Smls. pipe SA–234 SA–234 SA–335 SA–335 WP91 WP91 P91 P91 K90901 K90901 K90901 K90901 ... ... ... ... t t t t ≤ > ≤ > 3 3 3 3 15E 15E 15E 15E 1 1 1 1 21 22 23 24 25 26 9Cr–1Mo–V 9Cr–1Mo–V 9Cr–1Mo–V 9Cr–1Mo–V 9Cr–1Mo–V 9Cr–1Mo–V Forgings Forgings Forged pipe Forged pipe Plate Plate SA–336 SA–336 SA–369 SA–369 SA–387 SA–387 F91 F91 FP91 FP91 91 91 K90901 K90901 K90901 K90901 K90901 K90901 ... ... ... ... 2 2 t t t t t t ≤ > ≤ > ≤ > 3 3 3 3 3 3 15E 15E 15E 15E 15E 15E 1 1 1 1 1 1 27 28 29 30 31 11Cr–Ti 11Cr–Ti 11Cr–Ti 11Cr–Ti 11Cr–Ti Plate Plate Plate Wld. tube Smls. tube SA–240 SA–240 SA–240 SA–268 SA–268 ... ... ... TP409 TP409 S40910 S40920 S40930 S40900 S40900 ... ... ... ... ... ... ... ... ... ... 7 7 7 7 7 1 1 1 1 1 32 33 34 35 12Cr 12Cr 12Cr 12Cr Plate Bar Bar Plate SA–1010 SA–479 SA–479 SA–1010 40 403 403 50 S41003 S40300 S40300 S41003 ... A 1 ... t ≤3/4 ... ... t ≤3/4 7 6 6 7 1 1 1 1 36 37 38 39 12Cr–Al 12Cr–Al 12Cr–Al 12Cr–Al Plate Plate Bar Bar SA–240 SA–240 SA–479 SA/JIS G4303 405 405 405 SUS405 S40500 S40500 S40500 ... ... ... ... ... ... ... ... ... 7 7 7 7 1 1 1 1 40 41 42 43 12Cr–Al 12Cr–Al 12Cr–Ti 12Cr–Ti Smls. & wld. tube Wld. tube Wld. tube Smls. tube SA–268 SA–268 SA–268 SA–268 TP405 TP405 ... ... S40500 S40500 S40800 S40800 ... ... ... ... ... ... ... ... 7 7 7 7 1 1 1 1 Line No. Nominal Composition Product Form 1 2 3 4 5Cr–1/2Mo–Si 5Cr–1/2Mo–Si 5Cr–1/2Mo–Ti 5Cr–1/2Mo–Ti Smls. Smls. Smls. Smls. 5 6 7 8 9Cr–1Mo 9Cr–1Mo 9Cr–1Mo 9Cr–1Mo 9 10 11 12 tube pipe tube pipe Spec. No. 46 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 60 60 60 60 30 30 30 30 1200 1200 1200 1200 NP NP NP NP 1200 1200 1200 1200 NP NP NP NP CS–2 CS–2 CS–2 CS–2 T4 T4 T4 T4 5 6 7 8 60 60 60 60 30 30 30 30 1200 1200 1200 1200 700 NP 700 700 1200 1200 1200 1200 NP NP NP NP CS–2 CS–2 CS–2 CS–2 T5 T5 T5 T5 9 10 11 12 85 85 90 90 55 55 60 60 1200 NP 1200 NP NP NP 700 (SPT) 700 1200 1200 1200 NP NP NP NP NP CS–3 CS–3 CS–3 CS–3 T4 T4 G1, T4 G17 13 14 15 16 85 85 85 85 60 60 60 60 1200 1200 1200 1200 700 NP 700 700 1200 1200 1200 1200 NP NP NP NP CS–3 CS–3 CS–3 CS–3 T7 T7 T7 T7 17 18 19 20 85 85 85 85 60 60 60 60 1200 1200 1200 1200 NP NP 700 NP NP NP 1200 1200 NP NP NP NP CS–3 CS–3 CS–3 CS–3 T7 T7 T7 T7 21 22 23 24 25 26 85 85 85 85 85 85 60 60 60 60 60 60 1200 1200 1200 1200 1200 1200 NP NP NP NP 700 NP 1200 1200 NP NP 1200 1200 NP NP NP NP NP NP CS–3 CS–3 CS–3 CS–3 CS–3 CS–3 T7 T7 T7 T7 T7 T7 27 28 29 30 31 55 55 55 55 55 25 25 25 25 25 NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 NP NP NP 650 650 CS–1 CS–1 CS–1 CS–1 CS–1 ... ... ... G24 ... 32 33 34 35 66 70 70 70 40 40 40 50 NP NP NP NP NP 700 700 NP 600 NP NP 600 600 NP NP 600 CS–2 ... ... CS–3 ... ... ... ... 36 37 38 39 60 60 60 60 25 25 25 25 700 NP NP NP NP 700 700 700 1000 NP 1000 1000 650 NP 650 NP CS–1 CS–1 CS–1 CS–1 G19, T5 G19 G19, T5 G19, T5 40 41 42 43 60 60 55 55 30 30 30 30 700 700 NP NP NP NP NP NP 1000 1000 800 800 650 650 650 650 CS–2 CS–2 CS–2 CS–2 G19, T5, W13, W14 G3, G19, G24, T5 G19, W14 G19 47 Notes This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 17.1 17.1 17.1 17.1 ... ... ... ... 17.1 17.1 17.1 17.1 ... ... ... ... 16.6 16.6 16.6 16.6 16.5 16.5 16.5 16.5 16.4 16.4 16.4 16.4 16.2 16.2 16.2 16.2 15.9 15.9 15.9 15.9 15.6 15.6 15.6 15.6 15.1 15.1 15.1 15.1 14.5 14.5 14.5 14.5 13.8 13.8 13.8 13.8 10.9 10.9 10.9 10.9 5 6 7 8 17.1 17.1 17.1 17.1 ... ... ... ... 17.1 17.1 17.1 17.1 ... ... ... ... 16.6 16.6 16.6 16.6 16.5 16.5 16.5 16.5 16.4 16.4 16.4 16.4 16.2 16.2 16.2 16.2 15.9 15.9 15.9 15.9 15.6 15.6 15.6 15.6 15.1 15.1 15.1 15.1 14.5 14.5 14.5 14.5 13.8 13.8 13.8 13.8 13.0 13.0 13.0 13.0 9 10 11 12 24.3 24.3 25.7 25.7 ... ... ... ... 24.2 24.2 25.7 25.7 ... ... ... ... 23.5 23.5 24.9 24.9 23.4 23.4 24.7 24.7 23.3 23.3 24.6 24.6 22.9 22.9 24.3 24.3 22.6 22.6 23.9 23.9 22.1 22.1 23.4 23.4 21.4 21.4 22.7 ... 20.6 20.6 21.8 ... 19.6 19.6 20.8 ... 16.4 16.4 16.4 ... 13 14 15 16 24.3 24.3 24.3 24.3 ... ... ... ... 24.3 24.3 24.3 24.3 ... ... ... ... 24.3 24.3 24.3 24.3 24.2 24.2 24.2 24.2 24.1 24.1 24.1 24.1 23.7 23.7 23.7 23.7 23.4 23.4 23.4 23.4 22.9 22.9 22.9 22.9 22.2 22.2 22.2 22.2 21.3 21.3 21.3 21.3 20.3 20.3 20.3 20.3 19.1 19.1 19.1 19.1 17 18 19 20 24.3 24.3 24.3 24.3 ... ... ... ... 24.3 24.3 24.3 24.3 ... ... ... ... 24.3 24.3 24.3 24.3 24.2 24.2 24.2 24.2 24.1 24.1 24.1 24.1 23.7 23.7 23.7 23.7 23.4 23.4 23.4 23.4 22.9 22.9 22.9 22.9 22.2 22.2 22.2 22.2 21.3 21.3 21.3 21.3 20.3 20.3 20.3 20.3 19.1 19.1 19.1 19.1 21 22 23 24 25 26 24.3 24.3 24.3 24.3 24.3 24.3 ... ... ... ... ... ... 24.3 24.3 24.3 24.3 24.3 24.3 ... ... ... ... ... ... 24.3 24.3 24.3 24.3 24.3 24.3 24.2 24.2 24.2 24.2 24.2 24.2 24.1 24.1 24.1 24.1 24.1 24.1 23.7 23.7 23.7 23.7 23.7 23.7 23.4 23.4 23.4 23.4 23.4 23.4 22.9 22.9 22.9 22.9 22.9 22.9 22.2 22.2 22.2 22.2 22.2 22.2 21.3 21.3 21.3 21.3 21.3 21.3 20.3 20.3 20.3 20.3 20.3 20.3 19.1 19.1 19.1 19.1 19.1 19.1 27 28 29 30 31 15.7 15.7 15.7 13.4 15.7 ... ... ... ... ... 14.5 14.5 14.5 12.3 14.5 ... ... ... ... ... 13.1 13.1 13.1 11.1 13.1 12.1 12.1 12.1 10.3 12.1 11.6 11.6 11.6 9.9 11.6 11.3 11.3 11.3 9.6 11.3 11.3 11.3 11.3 9.6 11.3 11.3 11.3 11.3 9.6 11.3 11.2 11.2 11.2 9.5 11.2 11.1 11.1 11.1 9.4 11.1 ... ... ... ... ... ... ... ... ... ... 32 33 34 35 18.9 20.0 20.0 20.0 ... ... ... ... 18.9 20.0 20.0 20.0 ... ... ... ... 18.9 19.6 19.6 20.0 18.4 19.3 19.3 19.5 17.7 19.0 19.0 18.8 17.1 18.5 18.5 18.1 ... 18.1 18.1 ... ... 17.7 17.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 16.7 16.7 16.7 16.7 ... ... ... ... 15.3 15.3 15.3 15.3 ... ... ... ... 14.8 14.8 14.8 14.8 14.5 14.5 14.5 14.5 14.3 14.3 14.3 14.3 14.0 14.0 14.0 14.0 13.8 13.8 13.8 13.8 13.5 13.5 13.5 13.5 13.1 ... 13.1 13.1 12.6 ... 12.6 12.6 12.0 ... 12.0 12.0 11.3 ... 11.3 11.3 40 41 42 43 17.1 14.6 13.4 15.7 ... ... ... ... 17.1 14.6 13.4 15.7 ... ... ... ... 16.8 14.3 13.1 15.4 16.5 14.0 12.9 15.1 16.3 13.8 12.7 14.9 15.9 13.5 12.4 14.5 15.6 13.2 12.1 14.3 15.2 12.9 11.8 13.9 14.7 12.5 11.4 13.5 14.1 12.0 11.0 12.9 13.4 11.4 ... ... 12.6 10.7 ... ... 48 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 8.0 8.0 8.0 8.0 5.8 5.8 5.8 5.8 4.2 4.2 4.2 4.2 2.9 2.9 2.9 2.9 1.8 1.8 1.8 1.8 1.0 1.0 1.0 1.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 10.6 10.6 10.6 10.6 7.4 7.4 7.4 7.4 5.0 5.0 5.0 5.0 3.3 3.3 3.3 3.3 2.2 2.2 2.2 2.2 1.5 1.5 1.5 1.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 11.0 11.0 11.0 ... 7.4 7.4 7.4 ... 5.0 5.0 5.0 ... 3.3 3.3 3.3 ... 2.2 2.2 2.2 ... 1.5 1.5 1.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16 17.8 17.8 17.8 17.8 16.3 16.3 16.3 16.3 14.0 12.9 14.0 12.9 10.3 9.6 10.3 9.6 7.0 7.0 7.0 7.0 4.3 4.3 4.3 4.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 17.8 17.8 17.8 17.8 16.3 16.3 16.3 16.3 14.0 12.9 14.0 12.9 10.3 9.6 10.3 9.6 7.0 7.0 7.0 7.0 4.3 4.3 4.3 4.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 24 25 26 17.8 17.8 17.8 17.8 17.8 17.8 16.3 16.3 16.3 16.3 16.3 16.3 14.0 12.9 14.0 12.9 14.0 12.9 10.3 9.6 10.3 9.6 10.3 9.6 7.0 7.0 7.0 7.0 7.0 7.0 4.3 4.3 4.3 4.3 4.3 4.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 31 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 8.4 ... 8.4 8.4 4.0 ... 4.0 4.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 40 41 42 43 8.4 7.1 ... ... 4.0 3.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 49 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 13Cr 13Cr 13Cr Plate Smls. & wld. tube Wld. tube SA–240 SA–268 SA–268 410S TP410 TP410 S41008 ... S41000 ... S41000 ... ... ... ... 7 6 6 1 1 1 4 5 6 7 8 13Cr 13Cr 13Cr 13Cr 13Cr Plate Forgings Bar Bar Bar SA–240 SA–182 SA–479 SA–479 SA–479 410 F6a 410 410 410 S41000 S41000 S41000 S41000 S41000 ... 1 ... A 1 ... ... ... ... ... 6 6 6 6 6 1 1 1 1 1 9 10 11 12 13 13Cr 13Cr 13Cr 13Cr–4Ni 13Cr–4Ni Forgings Castings Cast pipe Castings Forgings SA–182 SA–217 SA–426 SA–487 SA–182 F6a CA15 CPCA15 CA6NM F6NM S41000 J91150 J91150 J91540 S41500 2 ... ... A ... ... ... ... ... ... 6 6 6 6 6 3 3 3 4 4 14 15 16 15Cr 15Cr 15Cr Wld. tube Smls. & wld. tube Plate SA–268 SA–268 SA–240 TP429 TP429 429 S42900 ... S42900 ... S42900 ... ... ... ... 6 6 6 2 2 2 17 18 19 20 17Cr 17Cr 17Cr 17Cr Wld. tube Smls. & wld. tube Plate Bar SA–268 SA–268 SA–240 SA–479 TP430 TP430 430 430 S43000 S43000 S43000 S43000 ... ... ... ... ... ... ... ... 7 7 7 7 2 2 2 2 21 22 23 24 17Cr–4Ni–3Cu 17Cr–4Ni–4Cu 17Cr–4Ni–4Cu 17Cr–4Ni–4Cu Castings Bar Plate Forgings SA–747 SA–564 SA–693 SA–705 CB7Cu–1 630 630 630 J92180 S17400 S17400 S17400 ... H1150 H1150 H1150 ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 17Cr–4Ni–4Cu 17Cr–4Ni–4Cu 17Cr–4Ni–4Cu Bar Plate Forgings SA–564 SA–693 SA–705 630 630 630 S17400 H1100 S17400 H1100 S17400 H1100 ... ... ... ... ... ... ... ... ... 28 29 30 17Cr–4Ni–4Cu 17Cr–4Ni–4Cu 17Cr–4Ni–4Cu Bar Plate Forgings SA–564 SA–693 SA–705 630 630 630 S17400 H1075 S17400 H1075 S17400 H1075 ... ... ... ... ... ... ... ... ... 31 32 33 18Cr–2Mo 18Cr–2Mo 18Cr–2Mo Plate Wld. tube Smls. tube SA–240 SA–268 SA–268 ... ... ... S44400 ... S44400 ... S44400 ... ... ... ... 7 7 7 2 2 2 34 35 36 37 38 18Cr–Ti 18Cr–Ti 18Cr–Ti 18Cr–Ti 18Cr–Ti Wld. tube Smls. tube Wld. pipe Smls. pipe Wld. tube SA–268 SA–268 SA–731 SA–731 SA–803 TP439 TP439 TP439 TP439 TP439 S43035 S43035 S43035 S43035 S43035 ... ... ... ... ... ... ... ... ... ... 7 7 7 7 7 2 2 2 2 2 39 40 41 18Cr–Ti 18Cr–Ti 18Cr–Ti Smls. tube Wld. tube Bar SA–268 SA–268 SA–479 TP430 Ti TP430 Ti 439 S43036 ... S43036 ... S43035 ... ... ... ... 7 7 7 2 2 2 Line No. Nominal Composition Product Form Spec. No. 50 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 60 60 60 30 30 30 NP 700 700 700 NP NP 1200 1200 1200 650 650 650 CS–2 CS–2 CS–2 T4 T4, W13, W14 G3, G24, T4 4 5 6 7 8 65 70 70 70 70 30 40 40 40 40 NP NP NP NP 700 NP 700 NP 700 700 1200 1000 1000 NP NP 650 650 650 NP NP CS–2 CS–2 CS–2 CS–2 CS–2 T4 T4 G22, T4 ... ... 9 10 11 12 13 85 90 90 110 115 55 65 65 80 90 NP NP NP NP NP 700 700 700 700 700 1200 1200 NP 800 NP 650 650 NP 650 NP CS–3 CS–5 CS–5 CS–5 CS–3 T3 G1, G17, T3 G17 G1, G17 G17 14 15 16 60 60 65 35 35 30 700 700 NP NP NP NP 700 1200 1200 650 650 650 CS–2 CS–2 CS–2 G3, G19, W14 G19, T4, W13, W14 G19, T4 17 18 19 20 60 60 65 70 35 35 30 40 700 700 NP 700 NP 700 NP 700 1200 1200 1200 1000 650 650 650 650 CS–2 CS–2 CS–2 CS–2 G3, G19, G24, T4 G19, T4, W12, W13, W14 G19, T4 G19, G22, T4 21 22 23 24 150 135 135 135 140 105 105 105 NP NP NP NP NP 650 650 650 200 650 NP NP NP NP NP NP HT–1 HT–1 HT–1 HT–1 G1, G28, W1 G8, G19, W1 G19, W1 G19, W1 25 26 27 140 140 140 115 115 115 NP NP NP 650 650 650 650 NP NP NP NP NP HT–1 HT–1 HT–1 G8, G19, W1 G19, W1 G19, W1 28 29 30 145 145 145 125 125 125 NP NP NP 650 650 650 NP NP NP NP NP NP HT–1 HT–1 HT–1 G19, W1 G19, W1 G19, W1 31 32 33 60 60 60 40 40 40 NP NP NP NP NP NP 650 650 650 650 650 650 CS–2 CS–2 CS–2 G19 G19, G24 G19 34 35 36 37 38 60 60 60 60 60 30 30 30 30 30 800 800 800 800 NP NP NP NP NP NP 800 800 NP NP 600 650 650 NP NP 600 CS–2 CS–2 CS–2 CS–2 CS–2 G19, G24 G19 G19, G24 G19 G19, G24 39 40 41 60 60 70 35 35 40 NP NP NP NP NP NP 800 800 1000 NP NP 650 CS–2 CS–2 CS–2 G19 G19, G24 G19, G22, T4 51 Notes This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 17.1 17.1 14.6 ... ... ... 17.1 17.1 14.6 ... ... ... 16.8 16.8 14.3 16.5 16.5 14.0 16.3 16.3 13.8 15.9 15.9 13.5 15.6 15.6 13.2 15.2 15.2 12.9 14.7 14.7 12.5 14.1 14.1 12.0 13.4 13.4 11.4 12.3 12.3 10.5 4 5 6 7 8 18.6 20.0 20.0 20.0 20.0 ... ... ... ... ... 18.4 20.0 20.0 20.0 20.0 ... ... ... ... ... 17.8 19.6 19.6 19.6 19.6 17.4 19.3 19.3 19.3 19.3 17.2 19.0 19.0 19.0 19.0 16.8 18.5 18.5 18.5 18.5 16.6 18.1 18.1 18.1 18.1 16.2 17.7 17.7 17.7 17.7 15.7 17.1 17.1 ... ... 15.1 16.4 16.4 ... ... 14.4 15.6 15.6 ... ... 12.3 12.3 12.3 ... ... 9 10 11 12 13 24.3 25.7 25.7 31.4 32.9 ... ... ... ... ... 24.3 25.7 25.7 31.4 32.9 ... ... ... 31.3 ... 23.8 25.2 25.2 30.8 32.9 23.4 24.8 24.8 30.1 32.5 23.0 24.4 24.4 29.4 31.3 22.5 23.8 23.8 28.8 30.0 22.0 23.3 23.3 28.4 29.4 21.5 22.7 22.7 27.9 28.7 20.8 22.0 ... 27.4 ... 19.9 21.1 ... 26.7 ... 17.2 15.9 ... ... ... 12.3 11.0 ... ... ... 14 15 16 14.6 17.1 18.6 ... ... ... 14.6 17.1 18.4 ... ... ... 14.3 16.8 17.8 14.0 16.5 17.4 13.8 16.3 17.2 13.5 15.9 16.8 13.2 15.6 16.6 12.9 15.2 16.2 ... 14.7 15.7 ... 14.1 15.1 ... 13.4 14.4 ... 12.0 12.0 17 18 19 20 14.6 17.1 18.6 20.0 ... ... ... ... 14.6 17.1 18.4 20.0 ... ... ... ... 14.3 16.8 17.8 19.6 14.0 16.5 17.4 19.3 13.8 16.3 17.2 19.0 13.5 15.9 16.8 18.5 13.2 15.6 16.6 18.1 12.9 15.2 16.2 17.7 12.5 14.7 15.7 17.1 12.0 14.1 15.1 16.4 11.4 13.4 14.4 15.6 10.2 12.0 12.0 12.0 21 22 23 24 32.0 38.6 38.6 38.6 ... ... ... ... 32.0 38.6 38.6 38.6 ... ... ... ... ... 38.6 38.6 38.6 ... 37.5 37.5 37.5 ... 36.8 36.8 36.8 ... 36.2 36.2 36.2 ... 35.9 35.9 35.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 40.0 40.0 40.0 ... ... ... 40.0 40.0 40.0 ... ... ... 40.0 40.0 40.0 38.9 38.9 38.9 38.1 38.1 38.1 37.5 37.5 37.5 37.2 37.2 37.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 41.4 41.4 41.4 ... ... ... 41.4 41.4 41.4 ... ... ... 41.4 41.4 41.4 40.3 40.3 40.3 39.5 39.5 39.5 38.9 38.9 38.9 38.5 38.5 38.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 17.1 14.6 17.1 ... ... ... 17.1 14.6 17.1 ... ... ... 16.6 14.1 16.6 16.2 13.8 16.2 15.9 13.5 15.9 15.4 13.1 15.4 15.1 12.8 15.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 38 14.6 17.1 14.6 17.1 14.6 ... ... ... ... ... 14.6 17.1 14.6 17.1 14.6 ... ... ... ... ... 13.3 15.7 13.3 15.7 13.3 12.4 14.6 12.4 14.6 12.4 11.8 13.9 11.8 13.9 11.8 11.6 13.6 11.6 13.6 11.6 11.5 13.6 11.5 13.6 ... 11.5 13.5 11.5 13.5 ... 11.4 13.4 11.4 13.4 ... 11.2 13.2 11.2 13.2 ... ... ... ... ... ... ... ... ... ... ... 39 40 41 17.1 14.6 20.0 ... ... ... 17.1 14.6 20.0 ... ... ... 16.6 14.1 19.3 16.1 13.7 18.8 15.8 13.4 18.4 15.4 13.1 17.9 15.1 12.9 17.7 14.8 12.6 17.3 14.5 12.3 16.9 14.0 11.9 16.4 ... ... 15.8 ... ... 12.2 52 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 8.8 8.8 7.5 6.4 6.4 5.4 4.4 4.4 3.7 2.9 2.9 2.5 1.8 1.8 1.5 1.0 1.0 0.85 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 7 8 8.8 8.8 8.8 ... ... 6.4 6.4 6.4 ... ... 4.4 ... ... ... ... 2.9 ... ... ... ... 1.8 ... ... ... ... 1.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 13 8.8 7.6 ... ... ... 6.4 5.0 ... ... ... 4.4 3.3 ... ... ... 2.9 2.2 ... ... ... 1.8 1.5 ... ... ... 1.0 1.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 ... 9.2 9.2 ... 6.5 6.5 ... 4.5 4.5 ... 3.2 3.2 ... 2.4 2.4 ... 1.8 1.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 7.8 9.2 9.2 9.2 5.5 6.5 6.5 6.5 3.8 4.5 4.5 ... 2.7 3.2 3.2 ... 2.0 2.4 2.4 ... 1.5 1.8 1.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 24 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 38 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 ... ... 9.2 ... ... 6.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 53 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 5 26Cr–3Ni–3Mo 26Cr–3Ni–3Mo 26Cr–3Ni–3Mo 26Cr–3Ni–3Mo 26Cr–3Ni–3Mo Plate Smls. tube Wld. tube Wld. tube Wld. tube SA–240 SA–268 SA–268 SA–268 SA–803 26–3–3 26–3–3 26–3–3 26–3–3 26–3–3 S44660 S44660 S44660 S44660 S44660 6 7 8 27Cr 27Cr–1Mo 27Cr–1Mo Smls. tube Forgings Plate SA–268 SA–182 SA–240 TP446–1 FXM–27Cb XM–27 9 10 11 12 13 27Cr–1Mo 27Cr–1Mo 27Cr–1Mo 27Cr–1Mo 27Cr–1Mo Wld. tube Smls. tube Bar Smls. pipe Wld. pipe SA–268 SA–268 SA–479 SA–731 SA–731 14 15 16 17 18 27Cr–1Mo–Ti 27Cr–1Mo–Ti 27Cr–1Mo–Ti 27Cr–1Mo–Ti 27Cr–1Mo–Ti Smls. pipe Wld. pipe Plate Smls. tube Wld. tube 19 20 21 22 29Cr–4Mo 29Cr–4Mo 29Cr–4Mo 29Cr–4Mo 23 24 25 26 27 28 Line No. Nominal Composition Product Form Spec. No. ≤2/10 ≤2/10 ≤2/10 ≤2/10 ≤2/10 10K 10K 10K 10K 10K 1 1 1 1 1 S44600 ... S44627 ... S44627 ... ... ... ... 10I 10I 10I 1 1 1 TPXM–27 TPXM–27 XM–27 TPXM–27 TPXM–27 S44627 S44627 S44627 S44627 S44627 ... ... ... ... ... ... ... ... ... ... 10I 10I 10I 10I 10I 1 1 1 1 1 SA–731 SA–731 SA–240 SA–268 SA–268 TPXM–33 TPXM–33 XM–33 TPXM–33 TPXM–33 S44626 S44626 S44626 S44626 S44626 ... ... ... ... ... ... ... ... ... ... 10I 10I 10I 10I 10I 1 1 1 1 1 Bar Plate Smls. tube Wld. tube SA–479 SA–240 SA–268 SA–268 ... ... 29–4 29–4 S44700 S44700 S44700 S44700 ... ... ... ... ... ... ... ... 10J 10J 10J 10J 1 1 1 1 29Cr–4Mo–2Ni 29Cr–4Mo–2Ni 29Cr–4Mo–2Ni 29Cr–4Mo–2Ni 29Cr–4Mo–Ti 29Cr–4Mo–Ti Bar Plate Smls. tube Wld. tube Smls. tube Wld. tube SA–479 SA–240 SA–268 SA–268 SA–268 SA–268 ... ... 29–4–2 29–4–2 ... ... S44800 S44800 S44800 S44800 S44735 S44735 ... ... ... ... ... ... ... ... ... ... ... ... 10K 10K 10K 10K 10J 10J 1 1 1 1 1 1 29 30 31 Mn–1/4Mo Mn–1/4Mo–V Mn–1/4Mo–V Forgings Castings Castings SA–372 SA–487 SA–487 D 2 2 K14508 ... J13005 A J13005 B ... ... ... ... 3 3 ... 3 3 32 33 34 35 36 37 Mn–1/2Mo Mn–1/2Mo Mn–1/2Mo Mn–1/2Mo Mn–1/2Mo Mn–1/2Mo Plate Wld. pipe Plate Plate Plate Plate SA–302 SA–672 SA–302 SA–533 SA–533 SA–533 A H75 B A A A K12021 K12021 K12022 K12521 K12521 K12521 ... ... ... 1 2 3 ... ... ... ... ... ... 3 3 3 3 3 11A 2 2 3 3 3 4 38 39 40 Mn–1/2Mo–1/4Ni Mn–1/2Mo–1/4Ni Mn–1/2Mo–1/4Ni Plate Plate Plate SA–533 SA–533 SA–533 D D D K12529 1 K12529 2 K12529 3 ... ... ... 3 3 11A 3 3 4 41 42 43 44 Mn–1/2Mo–1/2Ni Mn–1/2Mo–1/2Ni Mn–1/2Mo–1/2Ni Mn–1/2Mo–1/2Ni Plate Plate Wld. pipe Wld. pipe SA–302 SA–533 SA–672 SA–672 C B H80 J80 K12039 K12539 K12039 K12539 ... ... ... ... 3 3 3 3 3 3 3 3 54 ... ... ... ... ... ... 1 ... ... This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 85 85 85 85 85 65 65 65 65 65 NP NP NP NP NP NP 700 700 NP NP 700 700 NP 700 600 650 650 NP 650 600 HA–5 HA–5 HA–5 HA–5 HA–5 G19 G19, G19, G19, G19, 6 7 8 70 60 65 40 35 40 700 NP NP NP NP 650 650 650 650 650 650 650 CS–2 HA–2 HA–2 G19 G19 G19 9 10 11 12 13 65 65 65 65 65 40 40 40 40 40 NP NP NP NP NP NP 650 700 NP NP 650 650 650 650 650 650 650 650 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 G19, G24 G19 G19, G22 G19 G19, G24 14 15 16 17 18 65 65 68 68 68 40 40 45 45 45 NP NP NP NP NP NP NP NP NP NP 650 650 650 650 650 650 650 650 650 650 HA–2 HA–2 HA–6 HA–6 HA–6 G19 G19, G24 G19 G19 G19, G24 19 20 21 22 70 80 80 80 55 60 60 60 NP NP NP NP NP NP NP NP 600 600 600 600 600 600 600 600 HA–6 HA–6 HA–6 HA–6 G19, G22 G19 G19 G19, G24 23 24 25 26 27 28 70 80 80 80 75 75 55 60 60 60 60 60 NP NP NP NP NP NP NP NP NP NP NP NP 600 600 600 600 600 600 600 600 600 600 600 600 HA–6 HA–6 HA–6 HA–6 HA–6 HA–6 G19, G22 G19 G19 G19, G24 G19 G19, G24 29 30 31 105 85 90 65 53 65 NP NP NP 650 700 (SPT) NP 650 650 650 650 650 650 CS–5 CS–3 CS–5 G25, W2, W11 G1 G1 32 33 34 35 36 37 75 75 80 80 90 100 45 45 50 50 70 83 1000 NP 1000 NP NP NP 700 700 700 700 700 700 1000 NP 1000 1000 800 NP 650 NP 650 NP NP NP CS–3 CS–3 CS–3 CS–5 CS–5 CS–5 G11, S2, T3 S6, W10, W12 G11, S2, T3 G23, T4 ... ... 38 39 40 80 90 100 50 70 83 NP NP NP 700 700 700 NP 800 750 NP NP 650 CS–5 CS–5 CS–5 ... ... ... 41 42 43 44 80 80 80 80 50 50 50 50 1000 NP NP NP 700 700 700 700 1000 800 NP NP 650 NP NP NP CS–3 CS–5 CS–3 CS–5 G11, S2, T3 G23 G26, W10, W12 G26, W10, W12 55 Notes H5 H5, W12 G24 G24 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 24.3 24.3 24.3 20.6 20.6 ... ... ... ... ... 24.3 24.3 24.3 20.6 20.6 ... ... ... ... ... 24.2 24.2 24.2 20.6 20.6 23.9 23.9 23.9 20.3 20.3 23.8 23.8 23.8 20.2 20.2 23.6 23.6 23.6 20.1 20.1 23.5 23.5 23.5 20.0 ... 23.4 23.4 23.4 19.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 20.0 17.1 18.6 ... ... ... 20.0 17.1 18.6 ... ... ... 19.3 16.6 18.3 18.8 16.1 18.1 18.4 16.1 18.1 17.9 16.1 18.1 17.7 16.1 18.1 17.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 13 15.8 18.6 18.6 18.6 15.8 ... ... ... ... ... 15.8 18.6 18.6 18.6 15.8 ... ... ... ... ... 15.5 18.3 18.3 18.3 15.5 15.4 18.1 18.1 18.1 15.4 15.4 18.1 18.1 18.1 15.4 15.4 18.1 18.1 18.1 15.4 15.4 18.1 18.1 18.1 15.4 ... ... 18.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 17 18 18.6 15.8 19.4 19.4 16.5 ... ... ... ... ... 18.6 15.8 19.4 19.4 16.5 ... ... ... ... ... 18.4 15.7 19.3 19.3 16.4 18.2 15.4 19.0 19.0 16.2 18.0 15.3 18.8 18.8 16.0 17.6 15.0 18.4 18.4 15.7 17.3 14.7 18.1 18.1 15.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 20.0 22.9 22.9 19.4 ... ... ... ... 20.0 22.8 22.8 19.4 ... ... ... ... 19.3 22.1 22.1 18.8 19.2 21.9 21.9 18.6 19.2 21.9 21.9 18.6 19.2 21.9 21.9 18.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 27 28 20.0 22.9 22.9 19.4 21.4 18.2 ... ... ... ... ... ... 19.6 22.4 22.4 19.1 21.0 17.9 ... ... ... ... ... ... 19.3 22.1 22.1 18.8 20.7 17.6 19.2 21.9 21.9 18.6 20.5 17.5 18.9 21.6 21.6 18.4 20.3 17.2 18.6 21.3 21.3 18.1 20.0 17.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 30.0 24.3 25.7 ... ... ... 30.0 24.3 25.7 30.0 ... ... 30.0 24.3 25.7 30.0 24.2 25.6 30.0 24.2 25.6 30.0 24.2 25.6 30.0 24.1 25.6 ... 24.1 ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 36 37 21.4 21.4 22.9 22.9 25.7 28.6 ... ... ... 22.9 ... ... 21.4 21.4 22.9 22.9 25.7 28.6 ... ... ... ... 25.7 ... 21.4 21.4 22.9 22.9 25.7 28.6 21.4 21.4 22.9 22.9 25.7 28.6 21.4 21.4 22.9 22.9 25.7 28.6 21.4 21.4 22.9 22.9 25.7 28.6 21.4 21.4 22.9 22.9 25.7 28.6 21.4 21.4 22.9 22.9 25.7 28.6 21.4 ... 22.9 22.9 25.7 ... 21.4 ... 22.9 22.9 25.7 ... 20.0 ... 20.0 22.1 ... ... 13.7 ... 13.7 13.3 ... ... 38 39 40 22.9 25.7 28.6 ... ... ... 22.9 25.7 28.6 ... 25.7 28.6 22.9 25.7 28.6 22.9 25.7 28.6 22.9 25.7 28.6 22.9 25.7 28.6 22.9 25.7 28.6 22.9 25.7 28.6 ... 25.7 28.6 ... 25.7 ... ... ... ... ... ... ... 41 42 43 44 22.9 22.9 22.9 22.9 ... 22.9 ... ... 22.9 22.9 22.9 22.9 ... ... ... ... 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 22.9 ... ... 22.9 22.9 ... ... 20.0 ... ... ... 13.7 ... ... ... 56 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 13 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 17 18 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 27 28 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 36 37 8.2 ... 8.2 10.0 ... ... 4.8 ... 4.8 6.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 8.2 ... ... ... 4.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 57 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 Mn–1/2Mo–1/2Ni Mn–1/2Mo–1/2Ni Mn–1/2Mo–1/2Ni Mn–1/2Mo–1/2Ni Plate Wld. pipe Plate Wld. pipe SA–533 SA–672 SA–533 SA–672 B J90 B J100 K12539 K12539 K12539 K12539 2 ... 3 ... ... ... ... ... 3 3 11A 11A 3 3 4 4 5 6 7 8 9 10 Mn–1/2Mo–3/4Ni Mn–1/2Mo–3/4Ni Mn–1/2Mo–3/4Ni Mn–1/2Mo–3/4Ni Mn–1/2Mo–3/4Ni Mn–1/2Mo–3/4Ni Plate Plate Plate Plate Plate Plate SA–302 SA–533 SA–533 SA–533 SA–533 SA–533 D C E C E C K12054 K12554 K12554 K12554 K12554 K12554 ... 1 1 2 2 3 ... ... ... ... ... ... 3 3 3 3 3 11A 3 3 3 3 3 4 11 12 13 14 15 Mn–1/2Ni–V Mn–V Mn–V Mn–V 11/2Si–1/2Mo Plate Castings Castings Castings Smls. pipe SA–225 SA–487 SA–487 SA–487 SA–335 C 1 1 1 P15 K12524 J13002 J13002 J13002 K11578 ... A A B ... ... ... ... ... ... 10A 10A 10A 10A 3 1 1 1 1 1 16 17 18 19 20 1 /2Ni–1/2Cr–1/4Mo–V /2Ni–1/2Cr–1/4Mo–V 1 /2Ni–1/2Cr–1/4Mo–V 1 /2Ni–1/2Mo–V 1 /2Ni–1/2Mo–V Castings Castings Castings Forgings Forgings SA–487 SA–487 SA–487 SA–541 SA–541 4 4 4 3 3 J13047 J13047 J13047 K12045 K12045 A B E 1 2 ... ... ... ... ... 3 11A 11A 3 3 3 3 3 3 3 21 22 23 3 /4Ni–1/2Cr–1/2Mo–V /4Ni–1/2Cr–1/2Mo–V 3 /4Ni–1/2Cr–1/2Mo–V Forgings Plate Forgings SA–592 SA–517 SA–592 F F F K11576 ... K11576 ... K11576 ... 21/2 < t ≤ 4 ≤21/2 ≤21/2 11B 11B 11B 3 3 3 24 25 26 27 28 29 3 /4Ni–1/2Cu–Mo /4Ni–1/2Cu–Mo 3 /4Ni–1/2Mo–1/3Cr–V 3 /4Ni–1/2Mo–1/3Cr–V 3 /4Ni–1/2Mo–1/3Cr–V 3 /4Ni–1/2Mo–1/3Cr–V Smls. & wld. tube Wld. tube Forgings Forgings Forgings Forgings SA–423 SA–423 SA–508 SA–541 SA–508 SA–541 2 2 2 2 2 2 K11540 K11540 K12766 K12765 K12766 K12765 ... ... 1 1 2 2 ... ... ... ... ... ... 4 4 3 3 3 3 2 2 3 3 3 3 30 31 32 3 /4Ni–1/2Mo–Cr–V /4Ni–1/2Mo–Cr–V 3 /4Ni–1Mo–3/4Cr Forgings Forgings Castings SA–508 SA–508 SA–217 3 3 WC5 K12042 1 K12042 2 J22000 ... ... ... ... 3 3 4 3 3 1 33 34 35 1Ni–1/2Cr–1/2Mo 11/4Ni–1Cr–1/2Mo 11/4Ni–1Cr–1/2Mo Castings Plate Plate SA–217 SA–517 SA–517 WC4 P P J12082 ... K21650 ... K21650 ... ... 21/2 < t ≤ 4 ≤21/2 4 11B 11B 1 8 8 36 37 38 11/2Ni 11/2Ni 13/4Ni–3/4Cr–Mo Forgings Forgings Forgings SA–350 SA–350 SA–372 LF5 LF5 L K13050 1 K13050 2 K24055 ... ... ... ... 9A 9A ... 1 1 ... 39 40 41 42 43 2Ni–1Cu 2Ni–1Cu 2Ni–1Cu 2Ni–1Cu 2Ni–1Cu Forgings Fittings Pipe Smls. pipe Wld. pipe SA–182 SA–234 SA–333 SA–333 SA–333 FR WPR 9 9 9 K22035 K22035 K22035 K22035 K22035 ... ... ... ... ... 9A 9A 9A 9A 9A 1 1 1 1 1 Line No. Nominal Composition 1 3 3 3 Product Form Spec. No. 58 ... ... ... ... ... This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 90 90 100 100 70 70 83 83 NP NP NP NP 700 700 700 700 800 NP 750 NP NP NP 650 NP CS–5 CS–5 CS–5 CS–5 ... G26, W10, W12 ... G26, W10, W12 5 6 7 8 9 10 80 80 80 90 90 100 50 50 50 70 70 83 1000 NP NP NP NP NP 700 700 NP 700 NP 700 1000 800 800 800 800 NP 650 NP NP NP NP NP CS–3 CS–5 CS–5 CS–5 CS–5 CS–5 G11, S2, T3 G23 G23 ... ... ... 11 12 13 14 15 105 85 85 90 60 70 55 55 65 30 NP NP NP NP NP NP 700 (SPT) NP NP NP 700 NP 650 650 1000 650 NP 650 650 650 CS–5 CS–3 CS–3 CS–5 CS–2 ... ... G1 G1 T3 16 17 18 19 20 90 105 115 80 90 60 85 95 50 65 NP NP NP NP NP 650 NP NP 700 700 650 700 700 800 700 650 650 650 650 NP CS–3 CS–5 CS–5 CS–5 CS–5 G1 G1 G1 G23 ... 21 22 23 105 115 115 90 100 100 NP NP NP 650 (SPT) 650 (SPT) NP 650 650 650 650 650 650 CS–5 HT–1 HT–1 S7 ... ... 24 25 26 27 28 29 60 60 80 80 90 90 37 37 50 50 65 65 650 650 NP NP NP NP NP NP 700 700 700 700 650 650 800 800 700 700 NP NP 650 650 NP NP CS–2 CS–2 CS–5 CS–5 CS–5 CS–5 W13, W14 G3, G24 G23 G23 ... ... 30 31 32 80 90 70 50 65 40 NP NP 1100 700 700 700 800 700 1100 650 NP NP CS–5 CS–5 CS–2 G23 ... G1, G17, T4 33 34 35 70 105 115 40 90 100 1000 NP NP 700 700 (SPT) 650 (SPT) 1000 650 650 NP 650 650 CS–2 CS–5 HT–1 G1, G17, T4 ... ... 36 37 38 60 70 155 30 37.5 135 NP NP NP NP NP NP 500 500 650 500 500 650 CS–2 CS–2 ... ... ... W11 39 40 41 42 43 63 63 63 63 63 46 46 46 46 46 NP NP NP NP NP NP NP NP 100 NP 100 100 100 NP 100 100 NP 100 NP 100 CS–3 CS–3 CS–3 CS–3 CS–3 ... ... ... ... G24 59 Notes This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 25.7 25.7 28.6 28.6 ... ... ... ... 25.7 25.7 28.6 28.6 25.7 ... 28.6 ... 25.7 25.7 28.6 28.6 25.7 25.7 28.6 28.6 25.7 25.7 28.6 28.6 25.7 25.7 28.6 28.6 25.7 25.7 28.6 28.6 25.7 25.7 28.6 28.6 25.7 ... 28.6 ... 25.7 ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 9 10 22.9 22.9 22.9 25.7 25.7 28.6 ... 22.9 22.9 ... ... ... 22.9 22.9 22.9 25.7 25.7 28.6 ... ... ... 25.7 25.7 ... 22.9 22.9 22.9 25.7 25.7 28.6 22.9 22.9 22.9 25.7 25.7 28.6 22.9 22.9 22.9 25.7 25.7 28.6 22.9 22.9 22.9 25.7 25.7 28.6 22.9 22.9 22.9 25.7 25.7 28.6 22.9 22.9 22.9 25.7 25.7 28.6 22.9 22.9 22.9 25.7 25.7 ... 22.9 22.9 22.9 25.7 25.7 ... 20.0 ... ... ... ... ... 13.7 ... ... ... ... ... 11 12 13 14 15 30.0 24.3 24.3 25.7 17.1 30.0 ... ... ... 17.1 30.0 23.0 23.1 24.6 17.1 ... ... ... ... ... 30.0 22.4 22.5 24.2 17.1 30.0 22.4 22.5 24.1 17.1 30.0 22.4 22.5 24.1 17.1 30.0 21.9 21.9 23.9 16.8 30.0 21.5 21.5 23.4 16.6 30.0 20.9 ... ... 16.3 ... ... ... ... 15.9 ... ... ... ... 15.4 ... ... ... ... 13.8 ... ... ... ... 12.5 16 17 18 19 20 25.7 30.0 32.9 22.9 25.7 ... ... 32.9 22.9 ... 25.7 30.0 32.9 22.9 25.7 25.7 30.0 32.9 ... ... 25.7 30.0 32.9 22.9 25.7 25.7 30.0 32.9 22.9 25.7 25.7 30.0 32.9 22.9 25.7 25.7 30.0 32.9 22.9 25.7 25.7 30.0 32.9 22.9 25.7 ... 30.0 32.9 22.9 25.7 ... ... ... 22.9 ... ... ... ... 22.9 ... ... ... ... ... ... ... ... ... ... ... 21 22 23 30.0 32.9 32.9 ... ... ... 30.0 32.9 32.9 ... ... ... 30.0 32.9 32.9 30.0 32.9 32.9 30.0 32.9 32.9 30.0 32.9 32.9 30.0 32.8 32.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 28 29 17.1 14.6 22.9 22.9 25.7 25.7 ... ... 22.9 22.9 ... ... 17.1 14.6 22.9 22.9 25.7 25.7 ... ... ... ... ... ... 17.1 14.6 22.9 22.9 25.7 25.7 17.1 14.6 22.9 22.9 25.7 25.7 17.1 14.6 22.9 22.9 25.7 25.7 17.1 14.6 22.9 22.9 25.7 25.7 17.1 14.6 22.9 22.9 25.7 25.7 ... ... 22.9 22.9 25.7 25.7 ... ... 22.9 22.9 ... ... ... ... 22.9 22.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 22.9 25.7 20.0 22.9 ... 20.0 22.9 25.7 20.0 ... ... ... 22.9 25.7 20.0 22.9 25.7 20.0 22.9 25.7 20.0 22.9 25.7 20.0 22.9 25.7 20.0 22.9 25.7 20.0 22.9 ... 20.0 22.9 ... 20.0 ... ... 19.3 ... ... 16.3 33 34 35 20.0 30.0 32.9 ... ... ... 20.0 30.0 32.9 ... 30.0 32.9 20.0 30.0 32.9 20.0 30.0 32.9 20.0 30.0 32.9 20.0 30.0 32.9 20.0 30.0 32.8 20.0 29.4 ... 20.0 ... ... 20.0 ... ... 19.3 ... ... 15.0 ... ... 36 37 38 17.1 20.0 44.3 ... ... ... 16.5 19.2 44.3 ... ... ... 15.7 18.3 44.3 15.3 17.8 44.3 15.3 17.8 44.3 ... ... 44.1 ... ... 42.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 43 18.1 18.1 18.1 17.9 15.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 60 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 9 10 8.2 ... ... ... ... ... 4.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 15 ... ... ... ... 10.0 ... ... ... ... 6.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 20 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 28 29 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 ... ... 11.0 ... ... 6.9 ... ... 4.6 ... ... 2.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 9.2 ... ... 5.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 43 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 61 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 2Ni–1Cu 2Ni–1Cu 2Ni–1Cu Tube SA–334 Forgings SA–350 Smls. & wld. fittings SA–420 9 LF9 WPL9 K22035 ... K22036 ... K22035 ... ... ... ... 9A 9A 9A 1 1 1 4 5 6 7 8 2Ni–11/2Cr–1/4Mo–V 2Ni–11/2Cr–1/4Mo–V 2Ni–11/2Cr–1/4Mo–V 2Ni–11/2Cr–1/4Mo–V 2Ni–11/2Cr–1/4Mo–V Forgings Forgings Forgings Forgings Forgings SA–723 SA–723 SA–723 SA–723 SA–723 1 1 1 1 1 K23550 K23550 K23550 K23550 K23550 1 2 3 4 5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 21/2Ni 21/2Ni 21/2Ni 21/2Ni Pipe Wld. pipe Tube Wld. tube SA–333 SA–333 SA–334 SA–334 7 7 7 7 K21903 K21903 K21903 K21903 ... ... ... ... ... ... ... ... 9A 9A 9A 9A 1 1 1 1 13 14 15 21/2Ni 21/2Ni 21/2Ni Plate Plate Castings SA–203 SA–203 SA–352 A B LC2 K21703 ... K22103 ... J22500 ... ... ... ... 9A 9A 9A 1 1 1 16 17 18 23/4Ni–11/2Cr–1/2Mo 23/4Ni–11/2Cr–1/2Mo 23/4Ni–11/2Cr–1/2Mo Plate Plate Plate SA–543 SA–543 SA–543 C C C ... ... ... 3 1 2 ... ... ... 3 11A 11B 3 5 10 19 20 21 22 23 23/4Ni–11/2Cr–1/2Mo–V 23/4Ni–11/2Cr–1/2Mo–V 23/4Ni–11/2Cr–1/2Mo–V 23/4Ni–11/2Cr–1/2Mo–V 23/4Ni–11/2Cr–1/2Mo–V Forgings Forgings Forgings Forgings Forgings SA–723 SA–723 SA–723 SA–723 SA–723 2 2 2 2 2 K34035 K34035 K34035 K34035 K34035 1 2 3 4 5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 28 3Ni–13/4Cr–1/2Mo 3Ni–13/4Cr–1/2Mo 3Ni–13/4Cr–1/2Mo 3Ni–13/4Cr–1/2Mo 3Ni–13/4Cr–1/2Mo Plate Forgings Plate Plate Forgings SA–543 SA–372 SA–543 SA–543 SA–372 B M B B M K42339 K42365 K42339 K42339 K42365 3 85 1 2 100 ... ... ... ... ... 3 ... 11A 11B ... 3 ... 5 10 ... 29 30 31 32 33 31/2Ni 31/2Ni 31/2Ni 31/2Ni 31/2Ni Pipe Wld. pipe Tube Wld. tube Fittings SA–333 SA–333 SA–334 SA–334 SA–420 3 3 3 3 WPL3 K31918 K31918 K31918 K31918 ... ... ... ... ... ... ... ... ... ... ... 9B 9B 9B 9B 9B 1 1 1 1 1 34 35 36 37 31/2Ni 31/2Ni 31/2Ni 31/2Ni Plate Forgings Forgings Forgings SA–203 SA–350 SA–350 SA–765 D LF3 LF3 III K31718 K32025 K32025 K32026 ... 1 2 ... ... ... ... ... 9B 9B 9B 9B 1 1 1 1 38 39 40 41 42 31/2Ni 31/2Ni 31/2Ni 31/2Ni 31/2Ni Plate Plate Castings Plate Plate SA–203 SA–203 SA–352 SA–203 SA–203 E E LC3 F F K32018 K32018 J31550 ... ... ... ... ... ... ... ... ... ... >2 ≤2 9B 9B 9B 9B 9B 1 1 1 1 1 43 44 45 31/2Ni–13/4Cr–1/2Mo–V 31/2Ni–13/4Cr–1/2Mo–V 31/2Ni–13/4Cr–1/2Mo–V Forgings Forgings Forgings SA–508 SA–508 SA–508 4N 4N 4N K22375 3 K22375 1 K22375 2 ... ... ... 3 11A 11B 3 5 10 Line No. Nominal Composition Product Form Spec. No. 62 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 63 63 63 46 46 46 NP NP NP NP NP 100 100 100 100 100 100 100 CS–3 CS–3 CS–3 ... ... W14 4 5 6 7 8 115 135 155 175 190 100 120 140 160 180 NP NP NP NP NP NP NP NP NP NP NP NP NP NP NP HT–1 HT–1 HT–1 HT–1 HT–1 W1 W1 W1 W1 W1 9 10 11 12 65 65 65 65 35 35 35 35 NP NP NP NP NP NP NP NP 650 650 650 650 650 650 650 650 CS–2 CS–2 CS–2 CS–2 ... G24 ... G24 13 14 15 65 70 70 37 40 40 NP NP NP 700 650 100 1000 1000 650 650 650 650 CS–2 CS–2 CS–2 T2 T2 G1 16 17 18 90 105 115 70 85 100 NP NP NP NP NP NP 650 650 650 NP NP NP CS–5 CS–5 HT–1 ... ... ... 19 20 21 22 23 115 135 155 175 190 100 120 140 160 180 NP NP NP NP NP NP NP NP NP NP NP NP NP NP NP HT–1 HT–1 HT–1 HT–1 HT–1 W1 W1 W1 W1 W1 24 25 26 27 28 90 105 105 115 120 70 85 85 100 100 NP NP NP NP NP NP NP NP NP NP 650 650 650 650 650 NP 650 NP NP 650 CS–5 ... CS–5 HT–1 ... ... W11 ... ... W11 29 30 31 32 33 65 65 65 65 65 35 35 35 35 35 NP NP NP NP NP NP NP NP NP NP 650 650 650 650 650 650 650 650 650 650 CS–2 CS–2 CS–2 CS–2 CS–2 ... G24 ... G24 ... 34 35 36 37 65 70 70 70 37 37.5 37.5 37.5 NP NP NP NP 700 650 650 NP 1000 650 650 650 650 650 650 650 CS–2 CS–2 CS–2 CS–2 T2 ... ... ... 38 39 40 41 42 70 70 70 75 80 40 40 40 50 55 NP NP NP NP NP 300 (SPT) 650 100 NP NP NP 1000 650 650 650 NP 650 650 650 650 CS–2 CS–2 CS–2 CS–3 CS–3 ... T2 G1 ... ... 43 44 45 90 105 115 70 85 100 NP NP NP NP 600 (SPT) NP 650 650 650 650 NP NP CS–5 CS–5 HT–1 ... ... ... 700 700 700 700 700 700 700 700 700 700 (SPT) (SPT) (SPT) (SPT) (SPT) (SPT) (SPT) (SPT) (SPT) (SPT) 63 Notes This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 18.1 18.1 18.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 7 8 32.9 38.6 44.3 50.0 54.3 ... ... ... ... ... 32.9 38.6 44.3 50.0 54.3 ... ... ... ... ... 32.9 38.6 44.3 50.0 54.3 32.9 38.6 44.3 50.0 54.3 32.9 38.6 44.3 50.0 54.3 32.9 38.6 44.3 50.0 54.3 32.4 38.0 43.6 49.2 53.5 31.6 37.1 42.6 48.0 52.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 18.6 15.8 18.6 15.8 18.6 ... 18.6 15.8 18.6 15.8 18.6 15.8 ... ... ... ... 18.6 15.8 18.6 15.8 18.6 15.8 18.6 15.8 18.6 15.8 18.6 15.8 17.5 14.9 17.5 14.9 16.7 14.2 16.7 14.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 18.6 20.0 20.0 18.6 20.0 20.0 18.6 20.0 20.0 ... ... ... 18.6 20.0 20.0 18.6 20.0 20.0 18.6 20.0 20.0 18.5 20.0 20.0 17.6 19.0 19.0 16.6 18.0 ... 13.9 14.8 ... 11.4 12.0 ... 9.0 9.3 ... 6.5 6.5 ... 16 17 18 25.7 30.0 32.9 ... ... ... 25.7 30.0 32.9 25.7 30.0 32.9 25.7 30.0 32.9 25.5 29.7 32.5 25.3 29.5 32.3 25.0 29.1 31.9 24.6 28.7 31.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 23 32.9 38.6 44.3 50.0 54.3 ... ... ... ... ... 32.9 38.6 44.3 50.0 54.3 ... ... ... ... ... 32.9 38.6 44.3 50.0 54.3 32.9 38.6 44.3 50.0 54.3 32.9 38.6 44.3 50.0 54.3 32.9 38.6 44.3 50.0 54.3 32.4 38.0 43.6 49.2 53.5 31.6 37.1 42.6 48.0 52.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 28 25.7 30.0 30.0 32.9 34.3 ... ... ... ... ... 25.7 30.0 30.0 32.9 34.3 25.7 30.0 30.0 32.9 34.3 25.7 30.0 30.0 32.9 34.3 25.5 29.7 29.7 32.5 33.9 25.3 29.5 29.5 32.3 33.7 25.0 29.1 29.1 31.9 33.3 24.6 28.7 28.7 31.5 32.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 33 18.6 15.8 18.6 15.8 18.6 18.6 ... 18.6 15.8 18.6 18.6 15.8 18.6 15.8 18.6 ... ... ... ... ... 18.6 15.8 18.6 15.8 18.6 18.6 15.8 18.6 15.8 18.6 18.6 15.8 18.6 15.8 18.6 17.5 14.9 17.5 14.9 17.5 16.7 14.2 16.7 14.2 16.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 18.6 20.0 20.0 20.0 18.6 ... ... 20.0 18.6 20.0 20.0 20.0 ... ... ... ... 18.6 20.0 20.0 20.0 18.6 20.0 20.0 20.0 18.6 20.0 20.0 20.0 18.5 18.8 18.8 18.8 17.6 17.9 17.9 17.9 16.6 ... ... ... 13.9 ... ... ... 11.4 ... ... ... 9.0 ... ... ... 6.5 ... ... ... 38 39 40 41 42 20.0 20.0 20.0 21.4 22.9 ... ... 20.0 21.4 22.9 20.0 20.0 20.0 21.4 22.9 ... ... ... ... ... 20.0 20.0 20.0 21.4 22.9 ... 20.0 20.0 21.4 22.9 ... 20.0 20.0 21.4 22.9 ... 20.0 20.0 21.4 22.9 ... 19.0 19.0 20.5 20.5 ... 18.0 ... ... ... ... 14.8 ... ... ... ... 12.0 ... ... ... ... 9.3 ... ... ... ... 6.5 ... ... ... 43 44 45 25.7 30.0 32.9 ... ... ... 25.7 30.0 32.9 25.7 30.0 32.9 25.7 30.0 32.9 25.5 29.7 32.5 25.3 29.5 32.3 25.0 29.1 31.9 24.6 28.7 31.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 64 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 7 8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 4.5 4.5 ... 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 23 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 28 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 33 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 4.5 ... ... ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 42 ... 4.5 ... ... ... ... 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 43 44 45 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 65 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 5 4Ni–11/2Cr–1/2Mo–V 4Ni–11/2Cr–1/2Mo–V 4Ni–11/2Cr–1/2Mo–V 4Ni–11/2Cr–1/2Mo–V 4Ni–11/2Cr–1/2Mo–V Forgings Forgings Forgings Forgings Forgings SA–723 SA–723 SA–723 SA–723 SA–723 3 3 3 3 3 K44045 K44045 K44045 K44045 K44045 1 2 3 4 5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 5Ni–1/4Mo 8Ni 8Ni 8Ni Plate Forgings Plate Plate SA–645 SA–522 SA–553 SA–553 A II II II K41583 K71340 K71340 K71340 ... ... ... ... ... ... ... ... 11A 11A 11A 11A 2 1 1 1 10 11 12 13 14 15 9Ni 9Ni 9Ni 9Ni 9Ni 9Ni Plate Plate Plate Plate Plate Plate SA/EN SA/EN SA/EN SA/EN SA/EN SA/EN X8Ni9 X8Ni9 X7Ni9 X7Ni9 X8Ni9 X8Ni9 ... ... ... ... ... ... NNT640 QT640 QT QT QT680 QT680 ≤2 ≤2 ≤2 ≤2 ≤2 ≤2 11A 11A 11A 11A 11A 11A 1 1 1 1 1 1 16 17 18 19 20 9Ni 9Ni 9Ni 9Ni 9Ni Smls. & wld. pipe Smls. & wld. pipe Smls. pipe Smls. pipe Wld. pipe SA–333 SA–333 SA–333 SA–333 SA–333 8 8 8 8 8 K81340 K81340 K81340 K81340 K81340 ... ... ... ... ... ... ... ... ... ... 11A 11A 11A 11A 11A 1 1 1 1 1 21 22 23 24 25 9Ni 9Ni 9Ni 9Ni 9Ni Wld. tube Smls. & wld. tube Smls. tube Smls. tube Wld. tube SA–334 SA–334 SA–334 SA–334 SA–334 8 8 8 8 8 K81340 K81340 K81340 K81340 K81340 ... ... ... ... ... ... ... ... ... ... 11A 11A 11A 11A 11A 1 1 1 1 1 26 27 28 9Ni 9Ni 9Ni Plate Plate Plate SA–353 SA–353 SA–353 ... ... ... K81340 ... K81340 ... K81340 ... ... ... ... 11A 11A 11A 1 1 1 29 30 31 32 9Ni 9Ni 9Ni 9Ni Smls. & wld. fittings SA–420 Smls. & wld. fittings SA–420 Forgings SA–522 Forgings SA–522 WPL8 WPL8 I I K81340 K81340 K81340 K81340 ... ... ... ... ... ... ... ... 11A 11A 11A 11A 1 1 1 1 33 34 35 9Ni 9Ni 25Ni–15Cr–2Ti Plate Plate Bar SA–553 SA–553 SA–638 I I 660 K81340 ... K81340 ... S66286 ... ... ... ... 11A 11A ... 1 1 ... 36 37 38 39 40 41 27Ni–22Cr–7Mo–Mn–Cu–N 27Ni–22Cr–7Mo–Mn–Cu–N 27Ni–22Cr–7Mo–Mn–Cu–N 27Ni–22Cr–7Mo–Mn–Cu–N 27Ni–22Cr–7Mo–Mn–Cu–N 27Ni–22Cr–7Mo–Mn–Cu–N Smls. tube Smls. tube Plate Plate Wld. tube Wld. tube SA–213 SA–213 SA–240 SA–240 SA–249 SA–249 ... ... ... ... ... ... S31277 S31277 S31277 S31277 S31277 S31277 ... ... ... ... ... ... 45 45 45 45 45 45 ... ... ... ... ... ... Line No. Nominal Composition Product Form Spec. No. 10028–4 10028–4 10028–4 10028–4 10028–4 10028–4 66 ... ... ... ... ... ... This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I VIII-1 XII NP NP NP NP NP NP NP NP NP NP HT–1 HT–1 HT–1 HT–1 HT–1 W1 W1 W1 W1 W1 NP 200 (Cl. 3 only) 200 (Cl. 3 only) 200 (Cl. 3 only) 250 NP 250 250 250 NP 250 250 CS–3 CS–3 CS–3 CS–3 ... G20, W5 G20, W5 G20, W4 NP NP NP NP NP NP NP NP NP NP NP NP 250 250 250 250 250 250 250 250 250 250 250 250 CS–3 CS–3 CS–3 CS–3 CS–3 CS–3 G20 G20 G20, G20, G20, G20, W4 W5 W4 W5 1 2 3 4 5 115 135 155 175 190 100 120 140 160 180 NP NP NP NP NP 6 7 8 9 95 100 100 100 65 75 85 85 NP NP NP NP 69.5 69.5 83.5 83.5 83.5 83.5 10 11 12 13 14 15 93 93 98.5 98.5 98.5 98.5 III External Pressure Chart No. 700 700 700 700 700 (SPT) (SPT) (SPT) (SPT) (SPT) Notes 100 100 100 100 100 75 75 75 75 75 NP NP NP NP NP 200 (Cl. 3 only) 200 (Cl. 3 only) NP NP NP NP NP 250 250 250 NP NP 250 250 250 CS–3 CS–3 CS–3 CS–3 CS–3 G20, G20, G20, G20, G20, W12 W5, W12 W4 W5 G24, W3 21 22 23 24 25 100 100 100 100 100 75 75 75 75 75 NP NP NP NP NP 200 (Cl. 3 only) 200 (Cl. 3 only) NP NP NP NP NP 250 250 250 NP NP 250 250 250 CS–3 CS–3 CS–3 CS–3 CS–3 G20, G20, G20, G20, G20, W12 W5, W12 W4 W5 G24, W3 26 27 28 100 100 100 75 75 75 NP NP NP 200 (Cl. 3 only) NP 200 (Cl. 3 only) 250 250 NP 250 250 NP CS–3 CS–3 CS–3 G20, W4 G20, W5 G20, W5 29 30 31 32 100 100 100 100 75 75 75 75 NP NP NP NP NP NP 200 (Cl. 3 only) NP 250 250 250 250 250 250 250 250 CS–3 CS–3 CS–3 CS–3 G20, G20, G20, G20, 33 34 35 100 100 130 85 85 85 NP NP NP 200 (Cl. 3 only) 200 (Cl. 3 only) 700 250 250 700 250 250 NP CS–3 CS–3 HA–5 G20, W4 G20, W5 W1 36 37 38 39 40 41 112 112 112 112 112 112 52 52 52 52 52 52 NP NP NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 800 NP NP NP NP NP NP NFN–26 NFN–26 NFN–26 NFN–26 NFN–26 NFN–26 G5 ... G5 ... G3, G5 ... 67 W4 W3 S8, W4 S8, W5 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 16 17 18 19 20 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 32.9 38.6 44.3 50.0 54.3 ... ... ... ... ... 32.9 38.6 44.3 50.0 54.3 ... ... ... ... ... 32.9 38.6 44.3 50.0 54.3 32.9 38.6 44.3 50.0 54.3 32.9 38.6 44.3 50.0 54.3 32.9 38.6 44.3 50.0 54.3 32.4 38.0 43.6 49.2 53.5 31.6 37.1 42.6 48.0 52.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 27.1 27.1 27.1 28.6 ... 27.1 27.1 28.6 27.1 25.4 25.4 26.7 26.6 ... 24.6 25.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 14 15 26.5 26.5 28.2 27.1 28.2 27.1 26.5 26.5 28.2 27.1 28.2 27.1 26.5 26.5 28.2 27.1 28.2 27.1 26.5 26.5 28.2 27.1 28.2 27.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 20 28.6 27.1 28.6 27.1 24.3 28.6 27.1 28.6 27.1 24.3 26.7 25.4 26.7 25.4 22.7 ... ... 25.9 24.6 22.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 24 25 28.6 27.1 28.6 27.1 24.3 28.6 27.1 28.6 27.1 24.3 26.7 25.4 26.7 25.4 22.7 ... ... 25.9 24.6 22.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 26 27 28 28.6 27.1 27.1 28.6 27.1 27.1 26.7 25.4 25.4 25.9 24.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 28.6 27.1 28.6 27.1 28.6 27.1 28.6 27.1 26.7 25.4 26.7 25.4 25.9 24.6 25.9 24.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 28.6 27.1 37.1 28.6 27.1 ... 26.7 25.4 37.1 25.9 24.6 ... ... ... 37.1 ... ... 37.1 ... ... 36.5 ... ... 35.8 ... ... 35.4 ... ... 35.0 ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 40 41 32.0 32.0 32.0 32.0 27.2 27.2 32.0 32.0 32.0 32.0 27.2 27.2 32.0 32.0 32.0 32.0 27.2 27.2 31.5 30.4 31.5 30.4 26.8 25.8 30.7 28.8 30.7 28.8 26.1 24.5 29.4 26.5 29.4 26.5 24.9 22.5 28.4 25.5 28.4 25.5 24.1 21.7 27.5 25.4 27.5 25.4 23.4 21.6 27.1 25.4 27.1 25.4 23.1 21.6 26.8 25.3 26.8 25.3 22.7 21.5 26.5 25.1 26.5 25.1 22.5 21.3 26.3 24.9 26.3 24.9 22.3 21.2 ... ... ... ... ... ... ... ... ... ... ... ... 68 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 14 15 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 20 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 24 25 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 26 27 28 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 40 41 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 69 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 5 6 29Ni–20Cr–3Cu–2Mo 29Ni–20Cr–3Cu–2Mo 16Cr–4Ni–6Mn 16Cr–4Ni–6Mn 16Cr–9Mn–2Ni–N 16Cr–9Mn–2Ni–N Castings Castings Plate Plate Plate Plate SA–351 SA–351 SA–240 SA–240 SA–240 SA–240 CN7M CN7M 201LN 201LN 204 204 J95150 J95150 S20153 S20153 S20400 S20400 ... ... ... ... ... ... ... ... ... ... ... ... 45 45 8 8 8 8 ... ... 3 3 3 3 7 8 9 10 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Forgings Forgings Forgings Forgings SA–182 SA–182 SA–965 SA–965 F316L F316L F316L F316L S31603 S31603 S31603 S31603 ... ... ... ... >5 >5 ... ... 8 8 8 8 1 1 1 1 11 12 13 14 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Forgings Forgings Smls. tube Smls. tube SA–182 SA–182 SA–213 SA–213 F316L F316L TP316L TP316L S31603 S31603 S31603 S31603 ... ... ... ... ≤5 ≤5 ... ... 8 8 8 8 1 1 1 1 15 16 17 18 19 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Plate Plate Wld. tube Wld. tube Wld. tube SA–240 SA–240 SA–249 SA–249 SA–249 316L 316L TP316L TP316L TP316L S31603 S31603 S31603 S31603 S31603 ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 20 21 22 23 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Smls. & wld. pipe Smls. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP316L TP316L TP316L TP316L S31603 S31603 S31603 S31603 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 24 25 26 27 28 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Wld. pipe SA–358 Smls. & wld. fittings SA–403 Wld. pipe SA–409 Bar SA–479 Bar SA–479 316L 316L TP316L 316L 316L S31603 S31603 S31603 S31603 S31603 1 ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 29 30 31 32 33 34 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Wld. Wld. Wld. Wld. Wld. Bar SA–688 SA–688 SA–688 SA–813 SA–814 SA/JIS G4303 TP316L TP316L TP316L TP316L TP316L SUS316L S31603 S31603 S31603 S31603 S31603 ... ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 35 36 37 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Castings Castings Cast pipe SA–351 SA–351 SA–451 CF3M CF3M CPF3M J92800 ... J92800 ... J92800 ... ... ... ... 8 8 8 1 1 1 38 39 40 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Castings Castings Cast pipe SA–351 SA–351 SA–451 CF8M CF8M CPF8M J92900 ... J92900 ... J92900 ... ... ... ... 8 8 8 1 1 1 41 42 43 44 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Forgings Forgings Forgings Forgings SA–182 SA–182 SA–965 SA–965 F316 F316 F316 F316 S31600 S31600 S31600 S31600 >5 >5 ... ... 8 8 8 8 1 1 1 1 Line No. Nominal Composition Product Form tube tube tube pipe pipe Spec. No. 70 ... ... ... ... This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) III VIII-1 XII 1 2 3 4 5 6 62 62 95 95 95 95 25 25 45 45 48 48 600 600 NP NP NP NP 600 (Cl. 3 only) NP NP NP NP NP 600 600 800 800 900 900 NP NP 650 650 650 650 NFN–9 NFN–9 HA–6 HA–6 HA–6 HA–6 G1, G5 G1 G5 ... G5 ... 7 8 9 10 65 65 65 65 25 25 25 25 850 850 850 850 800 NP 800 NP 850 850 850 850 650 650 650 650 HA–4 HA–4 HA–4 HA–4 G5, G21 G21 G5, G21 G21 11 12 13 14 70 70 70 70 25 25 25 25 850 850 850 850 800 NP 800 NP 850 850 850 850 650 650 NP NP HA–4 HA–4 HA–4 HA–4 G5, G21 G21 G5, G21 G21 15 16 17 18 19 70 70 70 70 70 25 25 25 25 25 850 850 NP 850 850 800 NP 800 NP NP 850 850 NP 850 850 650 650 NP 650 650 HA–4 HA–4 HA–4 HA–4 HA–4 G5, G21 G21 G5, W12 G5, G21, G24 G21, G24 20 21 22 23 70 70 70 70 25 25 25 25 850 850 850 850 800 NP NP NP 850 850 850 850 650 650 650 650 HA–4 HA–4 HA–4 HA–4 G5, G21, W12, W14 G21 G5, G21, G24 G21, G24 24 25 26 27 28 70 70 70 70 70 25 25 25 25 25 NP NP NP 850 850 800 800 800 800 NP NP 850 NP 850 850 NP 650 NP 650 650 HA–4 HA–4 HA–4 HA–4 HA–4 G5 G5, W12, W14 G5 G5, G21, G22 G21, G22 29 30 31 32 33 34 70 70 70 70 70 70 25 25 25 25 25 25 NP NP NP NP NP 850 800 NP NP 800 800 800 NP 850 850 NP NP 850 NP 650 650 NP NP NP HA–4 HA–4 HA–4 HA–4 HA–4 HA–4 G5, G5, G24 G5, G5, G5, 35 36 37 70 70 70 30 30 30 NP NP NP 800 NP 800 850 850 800 650 650 NP HA–4 HA–4 HA–4 G1, G5, G16, G17, G19 G1, G19 G1, G5, G16, G17, G19 38 39 40 70 70 70 30 30 30 1500 1500 NP 800 NP 800 1500 1500 800 650 650 NP HA–2 HA–2 HA–2 G1, G5, G12, G16, G17, G19, H1, T6 G1, G12, G19, H1, T8 G1, G5, G16, G17, G19 41 42 43 44 70 70 70 70 30 30 30 30 1500 1500 1500 1500 800 NP 800 NP 1500 1500 1500 1500 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T8 G12, T9 G5, G12, T8 G12, T9 71 Notes W12 G24 W12 W12 G21, G22 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I External Pressure Chart No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 16.7 16.7 27.1 27.1 27.1 27.1 ... ... ... ... ... ... 16.0 14.4 23.7 23.7 23.6 23.6 ... ... ... ... ... ... 13.6 12.9 21.2 21.2 20.6 20.3 12.8 11.8 20.1 20.1 18.9 17.9 12.1 10.8 20.0 19.7 18.1 16.5 11.6 10.0 19.6 19.2 17.9 15.8 ... ... 19.6 18.6 17.9 15.6 ... ... 19.4 18.0 17.9 15.5 ... ... 19.2 17.4 17.8 15.3 ... ... 18.8 16.7 17.7 15.1 ... ... ... ... 17.4 14.8 ... ... ... ... 16.9 14.3 7 8 9 10 16.7 16.7 16.7 16.7 ... ... ... ... 16.7 14.2 16.7 14.2 ... ... ... ... 16.7 12.7 16.7 12.7 15.7 11.7 15.7 11.7 14.8 10.9 14.8 10.9 14.0 10.4 14.0 10.4 13.7 10.2 13.7 10.2 13.5 10.0 13.5 10.0 13.2 9.8 13.2 9.8 12.9 9.6 12.9 9.6 12.7 9.4 12.7 9.4 ... ... ... ... 11 12 13 14 16.7 16.7 16.7 16.7 ... ... ... ... 16.7 14.2 16.7 14.2 ... ... ... ... 16.7 12.7 16.7 12.7 15.7 11.7 15.7 11.7 14.8 10.9 14.8 10.9 14.0 10.4 14.0 10.4 13.7 10.2 13.7 10.2 13.5 10.0 13.5 10.0 13.2 9.8 13.2 9.8 12.9 9.6 12.9 9.6 12.7 9.4 12.7 9.4 ... ... ... ... 15 16 17 18 19 16.7 16.7 16.7 14.2 14.2 ... ... ... ... ... 16.7 14.2 16.7 14.2 12.1 ... ... ... ... ... 16.7 12.7 16.7 14.2 10.8 15.7 11.7 15.7 13.4 9.9 14.8 10.9 14.8 12.5 9.3 14.0 10.4 14.0 11.9 8.8 13.7 10.2 13.7 11.7 8.7 13.5 10.0 13.5 11.4 8.5 13.2 9.8 13.2 11.2 8.3 12.9 9.6 12.9 11.0 8.1 12.7 9.4 ... 10.8 8.0 ... ... ... ... ... 20 21 22 23 16.7 16.7 14.2 14.2 ... ... ... ... 16.7 14.2 14.2 12.1 ... ... ... ... 16.7 12.7 14.2 10.8 15.7 11.7 13.4 9.9 14.8 10.9 12.5 9.3 14.0 10.4 11.9 8.8 13.7 10.2 11.7 8.7 13.5 10.0 11.4 8.5 13.2 9.8 11.2 8.3 12.9 9.6 11.0 8.1 12.7 9.4 10.8 8.0 ... ... ... ... 24 25 26 27 28 16.7 16.7 16.7 16.7 16.7 ... ... ... ... ... 16.7 16.7 16.7 16.7 14.2 ... ... ... ... ... 16.7 16.7 16.7 16.7 12.7 15.7 15.7 15.7 15.7 11.7 14.8 14.8 14.8 14.8 10.9 14.0 14.0 14.0 14.0 10.4 13.7 13.7 13.7 13.7 10.2 13.5 13.5 13.5 13.5 10.0 13.2 13.2 13.2 13.2 9.8 12.9 12.9 12.9 12.9 9.6 ... 12.7 ... 12.7 9.4 ... ... ... ... ... 29 30 31 32 33 34 16.7 14.2 14.2 16.7 16.7 16.7 ... ... ... ... ... ... 16.7 14.2 12.1 16.7 16.7 16.7 ... ... ... ... ... ... 16.7 14.2 10.8 16.7 16.7 16.7 15.7 13.4 9.9 15.7 15.7 15.7 14.8 12.5 9.3 14.8 14.8 14.8 14.0 11.9 8.8 14.0 14.0 14.0 13.7 11.7 8.7 13.7 13.7 13.7 13.5 11.4 8.5 13.5 13.5 13.5 13.2 11.2 8.3 13.2 13.2 13.2 12.9 11.0 8.1 12.9 12.9 12.9 ... 10.8 8.0 ... ... 12.7 ... ... ... ... ... ... 35 36 37 20.0 20.0 20.0 ... ... ... 20.0 17.2 20.0 ... ... ... 19.4 15.5 19.4 19.2 14.2 19.2 17.9 13.3 17.9 17.0 12.6 17.0 16.6 12.3 16.6 16.3 12.1 16.3 16.0 11.9 16.1 15.8 11.7 15.8 15.7 11.6 ... ... ... ... 38 39 40 20.0 20.0 20.0 ... ... ... 20.0 17.2 20.0 ... ... ... 19.4 15.5 19.4 19.2 14.2 19.2 17.9 13.3 17.9 17.0 12.6 17.0 16.6 12.3 16.6 16.3 12.1 16.3 16.0 11.9 16.0 15.8 11.7 15.8 15.7 11.6 ... 15.5 11.5 ... 41 42 43 44 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 17.3 20.0 17.3 ... ... ... ... 19.4 15.6 19.4 15.6 19.2 14.3 19.2 14.3 18.0 13.3 18.0 13.3 17.0 12.6 17.0 12.6 16.6 12.3 16.6 12.3 16.3 12.1 16.3 12.1 16.1 11.9 16.1 11.9 15.9 11.8 15.9 11.8 15.7 11.6 15.7 11.6 15.6 11.5 15.6 11.5 72 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 28 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 33 34 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 15.4 11.4 ... 14.9 11.3 ... 11.5 11.2 ... 8.9 8.9 ... 6.9 6.9 ... 5.4 5.4 ... 4.3 4.3 ... 3.4 3.4 ... 2.8 2.8 ... 2.3 2.3 ... 1.9 1.9 ... 1.6 1.6 ... ... ... ... ... ... ... ... ... ... 41 42 43 44 15.4 11.4 15.4 11.4 15.3 11.3 15.3 11.3 15.1 11.2 15.1 11.2 12.4 11.1 12.4 11.1 9.8 9.8 9.8 9.8 7.4 7.4 7.4 7.4 5.5 5.5 5.5 5.5 4.1 4.1 4.1 4.1 3.1 3.1 3.1 3.1 2.3 2.3 2.3 2.3 1.7 1.7 1.7 1.7 1.3 1.3 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... 73 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Forgings Forgings Forgings Forgings SA–182 SA–182 SA–965 SA–965 F316H F316H F316H F316H S31609 S31609 S31609 S31609 ... ... ... ... >5 >5 ... ... 8 8 8 8 1 1 1 1 5 6 7 8 9 10 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Forgings Forgings Smls. tube Smls. tube Plate Plate SA–182 SA–182 SA–213 SA–213 SA–240 SA–240 F316 F316 TP316 TP316 316 316 S31600 S31600 S31600 S31600 S31600 S31600 ... ... ... ... ... ... ≤5 ≤5 ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 11 12 13 14 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Wld. Wld. Wld. Wld. SA–249 SA–249 SA–249 SA–249 TP316 TP316 TP316 TP316 S31600 S31600 S31600 S31600 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 15 16 17 18 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Smls. & wld. pipe Smls. & wld. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP316 TP316 TP316 TP316 S31600 S31600 S31600 S31600 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 19 20 21 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Wld. pipe Smls. pipe Smls. pipe SA–358 SA–376 SA–376 316 TP316 TP316 S31600 1 S31600 ... S31600 ... ... ... ... 8 8 8 1 1 1 22 23 24 25 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Smls. & wld. fittings SA–403 Wld. pipe SA–409 Bar SA–479 Bar SA–479 316 TP316 316 316 S31600 S31600 S31600 S31600 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 26 27 28 29 30 31 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Wld. Wld. Wld. Wld. Wld. Bar SA–688 SA–688 SA–688 SA–813 SA–814 SA/JIS G4303 TP316 TP316 TP316 TP316 TP316 SUS316 S31600 S31600 S31600 S31600 S31600 ... ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 32 33 34 35 36 37 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Forgings Forgings Smls. tube Smls. tube Plate Plate SA–182 SA–182 SA–213 SA–213 SA–240 SA–240 F316H F316H TP316H TP316H 316H 316H S31609 S31609 S31609 S31609 S31609 S31609 ... ... ... ... ... ... ≤5 ≤5 ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 38 39 40 41 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Wld. Wld. Wld. Wld. SA–249 SA–249 SA–249 SA–249 TP316H TP316H TP316H TP316H S31609 S31609 S31609 S31609 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 42 43 44 45 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Smls. & wld. pipe Smls. & wld. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP316H TP316H TP316H TP316H S31609 S31609 S31609 S31609 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 Line No. Nominal Composition Product Form tube tube tube tube tube tube tube pipe pipe tube tube tube tube Spec. No. 74 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 70 70 70 70 30 30 30 30 1500 1500 NP NP 800 NP 800 NP 1500 1500 1500 1500 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, G12, T8 T9 G5, T8 T9 5 6 7 8 9 10 75 75 75 75 75 75 30 30 30 30 30 30 1500 1500 1500 1500 1500 1500 800 NP 800 NP 800 NP 1500 1500 1500 1500 1500 1500 NP NP NP NP 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, G12, T8 G12, T9 G5, G12, T8 G12, T9 G5, G12, T8 G12, T9 11 12 13 14 75 75 75 75 30 30 30 30 1500 1500 1500 1500 NP 800 NP NP NP NP 1500 1500 NP NP 650 650 HA–2 HA–2 HA–2 HA–2 G12, T9, W13 G5, G12, T8, W12, W13 G3, G5, G12, G24, T7 G3, G12, G24, T9 15 16 17 18 75 75 75 75 30 30 30 30 1500 1500 1500 1500 800 NP NP NP 1500 1500 1500 1500 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T8, W12, W13, W14 G12, T9, W13, W14 G3, G5, G12, G24, T7 G3, G12, G24, T9 19 20 21 75 75 75 30 30 30 NP 1500 1500 800 800 NP NP 1500 1500 NP 650 650 HA–2 HA–2 HA–2 G5, W12 G5, G12, H1, T8, W12 G12, H1, T9 22 23 24 25 75 75 75 75 30 30 30 30 NP NP 1500 1500 800 800 800 NP 1500 NP 1500 1500 650 NP 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T8, W12, W14 G5, W12 G5, G12, G22, H1, T8 G12, G22, H1, T9 26 27 28 29 30 31 75 75 75 75 75 75 30 30 30 30 30 30 NP NP NP NP NP 1500 800 NP NP 800 800 800 NP 1500 1500 NP NP 1500 NP 650 650 NP NP NP HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, W12 G5, G12, G24, T7 G12, G24, T9 G5, W12 G5, W12 G5, G12, G22, H1, T8 32 33 34 35 36 37 75 75 75 75 75 75 30 30 30 30 30 30 1500 1500 1500 1500 1500 1500 800 NP 800 NP 800 NP 1500 1500 1500 1500 1500 1500 NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, T8 T9 G5, T8 T9 G5, T8 T9 38 39 40 41 75 75 75 75 30 30 30 30 1500 1500 1500 1500 NP NP NP 800 1500 1500 NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 G3, G3, T9, G5, G5, G24, T7 G24, T9 W13 T8, W12, W13 42 43 44 45 75 75 75 75 30 30 30 30 1500 1500 1500 1500 800 NP NP NP 1500 1500 1500 1500 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, T9, G3, G3, T8, W12, W13 W13 G5, G24, T7 G24, T9 75 Notes This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 17.3 20.0 17.3 ... ... ... ... 19.4 15.6 19.4 15.6 19.2 14.3 19.2 14.3 18.0 13.3 18.0 13.3 17.0 12.6 17.0 12.6 16.6 12.3 16.6 12.3 16.3 12.1 16.3 12.1 16.1 11.9 16.1 11.9 15.9 11.8 15.9 11.8 15.7 11.6 15.7 11.6 15.6 11.5 15.6 11.5 5 6 7 8 9 10 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 17.3 20.0 17.3 20.0 17.3 ... ... ... ... ... ... 20.0 15.6 20.0 15.6 20.0 15.6 19.3 14.3 19.3 14.3 19.3 14.3 18.0 13.3 18.0 13.3 18.0 13.3 17.0 12.6 17.0 12.6 17.0 12.6 16.6 12.3 16.6 12.3 16.6 12.3 16.3 12.1 16.3 12.1 16.3 12.1 16.1 11.9 16.1 11.9 16.1 11.9 15.9 11.8 15.9 11.8 15.9 11.8 15.7 11.6 15.7 11.6 15.7 11.6 15.6 11.5 15.6 11.5 15.6 11.5 11 12 13 14 20.0 20.0 17.0 17.0 ... ... ... ... 17.3 20.0 17.0 14.7 ... ... ... ... 15.6 20.0 17.0 13.2 14.3 19.3 16.4 12.1 13.3 18.0 15.3 11.3 12.6 17.0 14.5 10.7 12.3 16.6 14.1 10.5 12.1 16.3 13.9 10.3 11.9 16.1 13.7 10.1 11.8 15.9 13.5 10.0 11.6 15.7 13.4 9.9 11.5 15.6 13.2 9.8 15 16 17 18 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 17.3 17.0 14.7 ... ... ... ... 20.0 15.6 17.0 13.2 19.3 14.3 16.4 12.1 18.0 13.3 15.3 11.3 17.0 12.6 14.5 10.7 16.6 12.3 14.1 10.5 16.3 12.1 13.9 10.3 16.1 11.9 13.7 10.1 15.9 11.8 13.5 10.0 15.7 11.6 13.4 9.9 15.6 11.5 13.2 9.8 19 20 21 20.0 20.0 20.0 ... ... ... 20.0 20.0 17.3 ... ... ... 20.0 20.0 15.6 19.3 19.3 14.3 18.0 18.0 13.3 17.0 17.0 12.6 16.6 16.6 12.3 16.3 16.3 12.1 16.1 16.1 11.9 15.9 15.9 11.8 ... 15.7 11.6 ... 15.6 11.5 22 23 24 25 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 20.0 17.3 ... ... ... ... 20.0 20.0 20.0 15.6 19.3 19.3 19.3 14.3 18.0 18.0 18.0 13.3 17.0 17.0 17.0 12.6 16.6 16.6 16.6 12.3 16.3 16.3 16.3 12.1 16.1 16.1 16.1 11.9 15.9 15.9 15.9 11.8 15.7 ... 15.7 11.6 15.6 ... 15.6 11.5 26 27 28 29 30 31 20.0 17.0 17.0 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 17.0 14.7 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 17.0 13.2 20.0 20.0 20.0 19.3 16.4 12.1 19.3 19.3 19.3 18.0 15.3 11.3 18.0 18.0 18.0 17.0 14.5 10.7 17.0 17.0 17.0 16.6 14.1 10.5 16.6 16.6 16.6 16.3 13.9 10.3 16.3 16.3 16.3 16.1 13.7 10.1 16.1 16.1 16.1 15.9 13.5 10.0 15.9 15.9 15.9 ... 13.4 9.9 ... ... 15.7 ... 13.2 9.8 ... ... 15.6 32 33 34 35 36 37 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 17.3 20.0 17.3 20.0 17.3 ... ... ... ... ... ... 20.0 15.6 20.0 15.6 20.0 15.6 19.3 14.3 19.3 14.3 19.3 14.3 18.0 13.3 18.0 13.3 18.0 13.3 17.0 12.6 17.0 12.6 17.0 12.6 16.6 12.3 16.6 12.3 16.6 12.3 16.3 12.1 16.3 12.1 16.3 12.1 16.1 11.9 16.1 11.9 16.1 11.9 15.9 11.8 15.9 11.8 15.9 11.8 15.7 11.6 15.7 11.6 15.7 11.6 15.6 11.5 15.6 11.5 15.6 11.5 38 39 40 41 17.0 17.0 20.0 20.0 ... ... ... ... 17.0 14.7 17.3 20.0 ... ... ... ... 17.0 13.2 15.6 20.0 16.4 12.1 14.3 19.3 15.3 11.3 13.3 18.0 14.5 10.7 12.6 17.0 14.1 10.5 12.3 16.6 13.9 10.3 12.1 16.3 13.7 10.1 11.9 16.1 13.5 10.0 11.8 15.9 13.4 9.9 11.6 15.7 13.2 9.8 11.5 15.6 42 43 44 45 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 17.3 17.0 14.7 ... ... ... ... 20.0 15.6 17.0 13.2 19.3 14.3 16.4 12.1 18.0 13.3 15.3 11.3 17.0 12.6 14.5 10.7 16.6 12.3 14.1 10.5 16.3 12.1 13.9 10.3 16.1 11.9 13.7 10.1 15.9 11.8 13.5 10.0 15.7 11.6 13.4 9.9 15.6 11.5 13.2 9.8 76 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 15.4 11.4 15.4 11.4 15.3 11.3 15.3 11.3 15.1 11.2 15.1 11.2 12.4 11.1 12.4 11.1 9.8 9.8 9.8 9.8 7.4 7.4 7.4 7.4 5.5 5.5 5.5 5.5 4.1 4.1 4.1 4.1 3.1 3.1 3.1 3.1 2.3 2.3 2.3 2.3 1.7 1.7 1.7 1.7 1.3 1.3 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 9 10 15.4 11.4 15.4 11.4 15.4 11.4 15.3 11.3 15.3 11.3 15.3 11.3 15.1 11.2 15.1 11.2 15.1 11.2 12.4 11.1 12.4 11.1 12.4 11.1 9.8 9.8 9.8 9.8 9.8 9.8 7.4 7.4 7.4 7.4 7.4 7.4 5.5 5.5 5.5 5.5 5.5 5.5 4.1 4.1 4.1 4.1 4.1 4.1 3.1 3.1 3.1 3.1 3.1 3.1 2.3 2.3 2.3 2.3 2.3 2.3 1.7 1.7 1.7 1.7 1.7 1.7 1.3 1.3 1.3 1.3 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 11.4 15.4 13.1 9.7 11.3 15.3 13.0 9.6 11.2 15.1 12.9 9.5 11.1 12.4 10.5 9.4 9.8 9.8 8.3 8.3 7.4 7.4 6.3 6.3 5.5 5.5 4.7 4.7 4.1 4.1 3.5 3.5 3.1 3.1 2.6 2.6 2.3 2.3 1.9 1.9 1.7 1.7 1.4 1.4 1.3 1.3 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 15.4 11.4 13.1 9.7 15.3 11.3 13.0 9.6 15.1 11.2 12.9 9.5 12.4 11.1 10.5 9.4 9.8 9.8 8.3 8.3 7.4 7.4 6.3 6.3 5.5 5.5 4.7 4.7 4.1 4.1 3.5 3.5 3.1 3.1 2.6 2.6 2.3 2.3 1.9 1.9 1.7 1.7 1.4 1.4 1.3 1.3 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 ... 15.4 11.4 ... 15.3 11.3 ... 15.1 11.2 ... 12.4 11.1 ... 9.8 9.8 ... 7.4 7.4 ... 5.5 5.5 ... 4.1 4.1 ... 3.1 3.1 ... 2.3 2.3 ... 1.7 1.7 ... 1.3 1.3 ... ... ... ... ... ... ... ... ... 22 23 24 25 15.4 ... 15.4 11.4 15.3 ... 15.3 11.3 15.1 ... 15.1 11.2 12.4 ... 12.4 11.1 9.8 ... 9.8 9.8 7.4 ... 7.4 7.4 5.5 ... 5.5 5.5 4.1 ... 4.1 4.1 3.1 ... 3.1 3.1 2.3 ... 2.3 2.3 1.7 ... 1.7 1.7 1.3 ... 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... 26 27 28 29 30 31 ... 13.1 9.7 ... ... 15.4 ... 13.0 9.6 ... ... 15.3 ... 12.9 9.5 ... ... 15.1 ... 10.5 9.4 ... ... 12.4 ... 8.3 8.3 ... ... 9.8 ... 6.3 6.3 ... ... 7.4 ... 4.7 4.7 ... ... 5.5 ... 3.5 3.5 ... ... 4.1 ... 2.6 2.6 ... ... 3.1 ... 1.9 1.9 ... ... 2.3 ... 1.4 1.4 ... ... 1.7 ... 1.1 1.1 ... ... 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 36 37 15.4 11.4 15.4 11.4 15.4 11.4 15.3 11.3 15.3 11.3 15.3 11.3 15.1 11.2 15.1 11.2 15.1 11.2 12.4 11.1 12.4 11.1 12.4 11.1 9.8 9.8 9.8 9.8 9.8 9.8 7.4 7.4 7.4 7.4 7.4 7.4 5.5 5.5 5.5 5.5 5.5 5.5 4.1 4.1 4.1 4.1 4.1 4.1 3.1 3.1 3.1 3.1 3.1 3.1 2.3 2.3 2.3 2.3 2.3 2.3 1.7 1.7 1.7 1.7 1.7 1.7 1.3 1.3 1.3 1.3 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 13.1 9.7 11.4 15.4 13.0 9.6 11.3 15.3 12.9 9.5 11.2 15.1 10.5 9.4 11.1 12.4 8.3 8.3 9.8 9.8 6.3 6.3 7.4 7.4 4.7 4.7 5.5 5.5 3.5 3.5 4.1 4.1 2.6 2.6 3.1 3.1 1.9 1.9 2.3 2.3 1.4 1.4 1.7 1.7 1.1 1.1 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... 42 43 44 45 15.4 11.4 13.1 9.7 15.3 11.3 13.0 9.6 15.1 11.2 12.9 9.5 12.4 11.1 10.5 9.4 9.8 9.8 8.3 8.3 7.4 7.4 6.3 6.3 5.5 5.5 4.7 4.7 4.1 4.1 3.5 3.5 3.1 3.1 2.6 2.6 2.3 2.3 1.9 1.9 1.7 1.7 1.4 1.4 1.3 1.3 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... 77 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Wld. pipe Smls. pipe Smls. pipe Smls. & wld. fittings SA–358 SA–376 SA–376 SA–403 316H TP316H TP316H 316H S31609 S31609 S31609 S31609 1 ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 5 6 7 8 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo Bar Bar Wld. pipe Wld. pipe SA–479 SA–479 SA–813 SA–814 316H 316H TP316H TP316H S31609 S31609 S31609 S31609 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 9 10 11 12 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo 16Cr–12Ni–2Mo–Cb 16Cr–12Ni–2Mo–Cb Plate Plate Plate Plate SA/EN 10028–7 SA/EN 10028–7 SA–240 SA–240 X5CrNiMo17–12–2 X5CrNiMo17–12–2 316Cb 316Cb ... ... S31640 S31640 ... ... ... ... ≤3 ≤3 ... ... 8 8 8 8 1 1 1 1 13 14 15 16 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N Forgings Forgings Forgings Smls. tube SA–182 SA–965 SA–182 SA–213 F316LN F316LN F316LN TP316LN S31653 S31653 S31653 S31653 ... ... ... ... >5 ... ≤5 ... 8 8 8 8 1 1 1 1 17 18 19 20 21 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N Plate Wld. tube Smls. & wld. pipe Wld. pipe Smls. pipe SA–240 SA–249 SA–312 SA–358 SA–376 316LN TP316LN TP316LN 316LN TP316LN S31653 S31653 S31653 S31653 S31653 ... ... ... 1 ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 22 23 24 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N Fittings Bar Wld. tube SA–403 SA–479 SA–688 316LN 316LN TP316LN S31653 ... S31653 ... S31653 ... ... ... ... 8 8 8 1 1 1 25 26 27 28 29 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N Forgings Smls. tube Smls. tube Plate Plate SA–182 SA–213 SA–213 SA–240 SA–240 F316N TP316N TP316N 316N 316N S31651 S31651 S31651 S31651 S31651 ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 30 31 32 33 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N Wld. Wld. Wld. Wld. SA–249 SA–249 SA–249 SA–249 TP316N TP316N TP316N TP316N S31651 S31651 S31651 S31651 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 34 35 36 37 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N Smls. & wld. pipe Smls. & wld. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP316N TP316N TP316N TP316N S31651 S31651 S31651 S31651 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 38 39 40 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N Wld. pipe Smls. pipe Smls. pipe SA–358 SA–376 SA–376 316N TP316N TP316N S31651 1 S31651 ... S31651 ... ... ... ... 8 8 8 1 1 1 41 42 43 44 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N Smls. & wld. fittings SA–403 Bar SA–479 Bar SA–479 Wld. tube SA–688 316N 316N 316N TP316N S31651 S31651 S31651 S31651 ... ... ... ... 8 8 8 8 1 1 1 1 Line No. Nominal Composition Product Form tube tube tube tube Spec. No. 78 ... ... ... ... This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 75 75 75 75 30 30 30 30 NP 1500 1500 NP 800 800 NP 800 NP 1500 1500 1500 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, G5, H1, G5, W12 H1, T8 T9 G12, T8, W12, W14 5 6 7 8 75 75 75 75 30 30 30 30 1500 1500 NP NP 800 NP 800 800 NP NP NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, H1, G5, G5, H1, T8 T9 W12 W12 9 10 11 12 75 75 75 75 32 32 30 30 NP NP NP NP NP NP NP NP 1022 1022 1500 1500 NP NP 650 650 HA–2 HA–2 HA–2 HA–2 G5 ... G5, G12, T8 G12, T9 13 14 15 16 70 70 75 75 30 30 30 30 NP NP NP NP 800 800 800 800 NP NP NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5 G5 G5 G5 17 18 19 20 21 75 75 75 75 75 30 30 30 30 30 NP NP NP NP NP 800 800 800 800 800 NP NP NP NP NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 HA–2 G5 G5, W12 G5, W12 G5, W12 G5 22 23 24 75 75 75 30 30 30 NP NP NP 800 800 800 NP NP NP NP NP NP HA–2 HA–2 HA–2 G5, W12 G5 G5, W12 25 26 27 28 29 80 80 80 80 80 35 35 35 35 35 NP 1200 1200 NP NP 800 800 NP 800 NP NP 1200 1200 1200 1200 NP NP NP 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 G5 G5, G12, T7 G12, T8 G5, G12, T7 G12, T8 30 31 32 33 80 80 80 80 35 35 35 35 1200 1200 1200 1200 NP NP NP NP NP NP 1200 1200 NP NP 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T7, W13 G12, T8, W13 G3, G12, G24, T8 G3, G5, G12, G24, T7 34 35 36 37 80 80 80 80 35 35 35 35 1200 1200 1200 1200 800 NP NP NP 1200 1200 1200 1200 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T7, W12, W13, W14 G12, T8, W13, W14 G3, G12, G24, T8 G3, G5, G12, G24, T7 38 39 40 80 80 80 35 35 35 NP 1200 1200 800 800 NP NP 1200 1200 NP 650 650 HA–2 HA–2 HA–2 G5, W12 G5, G12, H1, T7 G12, H1, T8 41 42 43 44 80 80 80 80 35 35 35 35 NP 1200 1200 NP 800 800 NP 800 1200 NP NP NP 650 NP NP NP HA–2 HA–2 HA–2 HA–2 G5, G12, T7, W12, W14 G5, G12, H1, T7 G12, H1, T8 G5, W12 79 Notes This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 17.3 20.0 ... ... ... ... 20.0 20.0 15.6 20.0 19.3 19.3 14.3 19.3 18.0 18.0 13.3 18.0 17.0 17.0 12.6 17.0 16.6 16.6 12.3 16.6 16.3 16.3 12.1 16.3 16.1 16.1 11.9 16.1 15.9 15.9 11.8 15.9 ... 15.7 11.6 15.7 ... 15.6 11.5 15.6 5 6 7 8 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 17.3 20.0 20.0 ... ... ... ... 20.0 15.6 20.0 20.0 19.3 14.3 19.3 19.3 18.0 13.3 18.0 18.0 17.0 12.6 17.0 17.0 16.6 12.3 16.6 16.6 16.3 12.1 16.3 16.3 16.1 11.9 16.1 16.1 15.9 11.8 15.9 15.9 15.7 11.6 ... ... 15.6 11.5 ... ... 9 10 11 12 21.3 21.3 20.0 20.0 ... ... ... ... 21.3 18.4 20.0 17.7 ... ... ... ... 20.9 15.6 20.0 15.8 20.5 15.2 19.4 14.3 19.1 14.2 17.8 13.2 18.1 13.4 16.8 12.4 17.7 13.1 16.5 12.2 17.4 12.9 16.2 12.0 17.1 12.7 16.0 11.9 16.9 12.5 15.9 11.8 16.7 12.4 15.8 11.7 16.6 12.3 15.7 11.6 13 14 15 16 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 20.0 20.0 ... ... ... ... 18.9 18.9 20.0 20.0 17.9 17.9 18.9 18.9 17.2 17.2 17.5 17.5 16.5 16.5 16.5 16.5 16.0 16.0 16.0 16.0 15.6 15.6 15.6 15.6 15.2 15.2 15.2 15.2 14.8 14.8 14.8 14.8 ... ... ... ... ... ... ... ... 17 18 19 20 21 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 20.0 20.0 20.0 20.0 20.0 18.9 18.9 18.9 18.9 18.9 17.5 17.5 17.5 17.5 17.5 16.5 16.5 16.5 16.5 16.5 16.0 16.0 16.0 16.0 16.0 15.6 15.6 15.6 15.6 15.6 15.2 15.2 15.2 15.2 15.2 14.8 14.8 14.8 14.8 14.8 ... ... ... ... ... ... ... ... ... ... 22 23 24 20.0 20.0 20.0 ... ... ... 20.0 20.0 20.0 ... ... ... 20.0 20.0 20.0 18.9 18.9 18.9 17.5 17.5 17.5 16.5 16.5 16.5 16.0 16.0 16.0 15.6 15.6 15.6 15.2 15.2 15.2 14.8 14.8 14.8 ... ... ... ... ... ... 25 26 27 28 29 22.9 22.9 22.9 22.9 22.9 ... ... ... ... ... 22.9 22.9 20.7 22.9 20.7 ... ... ... ... ... 22.0 22.0 19.0 22.0 19.0 21.5 21.5 17.6 21.5 17.6 21.2 21.2 16.5 21.2 16.5 21.0 21.0 15.6 21.0 15.6 20.5 20.5 15.2 20.5 15.2 20.0 20.0 14.9 20.0 14.9 19.6 19.6 14.5 19.6 14.5 19.2 19.2 14.2 19.2 14.2 ... 18.8 13.9 18.8 13.9 ... 18.5 13.7 18.5 13.7 30 31 32 33 22.9 22.9 19.4 19.4 ... ... ... ... 22.9 20.7 17.6 19.4 ... ... ... ... 22.0 19.0 16.1 18.7 21.5 17.6 15.0 18.2 21.2 16.5 14.0 18.1 21.0 15.6 13.3 17.9 20.5 15.2 12.9 17.4 20.0 14.9 12.6 17.0 19.6 14.5 12.3 16.7 19.2 14.2 12.1 16.3 18.8 13.9 11.9 16.0 18.5 13.7 11.6 15.7 34 35 36 37 22.9 22.9 19.4 19.4 ... ... ... ... 22.9 20.7 17.6 19.4 ... ... ... ... 22.0 19.0 16.1 18.7 21.5 17.6 15.0 18.2 21.2 16.5 14.0 18.1 21.0 15.6 13.3 17.9 20.5 15.2 12.9 17.4 20.0 14.9 12.6 17.0 19.6 14.5 12.3 16.7 19.2 14.2 12.1 16.3 18.8 13.9 11.9 16.0 18.5 13.7 11.6 15.7 38 39 40 22.9 22.9 22.9 ... ... ... 22.9 22.9 20.7 ... ... ... 22.0 22.0 19.0 21.5 21.5 17.6 21.2 21.2 16.5 21.0 21.0 15.6 20.5 20.5 15.2 20.0 20.0 14.9 19.6 19.6 14.5 19.2 19.2 14.2 ... 18.8 13.9 ... 18.5 13.7 41 42 43 44 22.9 22.9 22.9 22.9 ... ... ... ... 22.9 22.9 20.7 22.9 ... ... ... ... 22.0 22.0 19.0 22.0 21.5 21.5 17.6 21.5 21.2 21.2 16.5 21.2 21.0 21.0 15.6 21.0 20.5 20.5 15.2 20.5 20.0 20.0 14.9 20.0 19.6 19.6 14.5 19.6 19.2 19.2 14.2 19.2 18.8 18.8 13.9 ... 18.5 18.5 13.7 ... 80 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... 15.4 11.4 15.4 ... 15.3 11.3 15.3 ... 15.1 11.2 15.1 ... 12.4 11.1 12.4 ... 9.8 9.8 9.8 ... 7.4 7.4 7.4 ... 5.5 5.5 5.5 ... 4.1 4.1 4.1 ... 3.1 3.1 3.1 ... 2.3 2.3 2.3 ... 1.7 1.7 1.7 ... 1.3 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 15.4 11.4 ... ... 15.3 11.3 ... ... 15.1 11.2 ... ... 12.4 11.1 ... ... 9.8 9.8 ... ... 7.4 7.4 ... ... 5.5 5.5 ... ... 4.1 4.1 ... ... 3.1 3.1 ... ... 2.3 2.3 ... ... 1.7 1.7 ... ... 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 16.4 12.2 15.5 11.5 16.3 12.0 15.3 11.4 16.1 11.9 15.1 11.2 ... ... 12.3 11.0 ... ... 9.8 9.8 ... ... 7.4 7.4 ... ... 5.5 5.5 ... ... 4.1 4.1 ... ... 3.1 3.1 ... ... 2.3 2.3 ... ... 1.7 1.7 ... ... 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 21 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 29 ... 18.1 13.4 18.1 13.4 ... 17.8 13.2 17.8 13.2 ... 15.8 12.9 15.8 12.9 ... 12.3 12.3 12.3 12.3 ... 9.8 9.8 9.8 9.8 ... 7.4 7.4 7.4 7.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 33 18.1 13.4 11.4 15.4 17.8 13.2 11.2 15.1 15.8 12.9 11.0 13.4 12.3 12.3 10.5 10.5 9.8 9.8 8.3 8.3 7.4 7.4 6.3 6.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 18.1 13.4 11.4 15.4 17.8 13.2 11.2 15.1 15.8 12.9 11.0 13.4 12.3 12.3 10.5 10.5 9.8 9.8 8.3 8.3 7.4 7.4 6.3 6.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 ... 18.1 13.4 ... 17.8 13.2 ... 15.8 12.9 ... 12.3 12.3 ... 9.8 9.8 ... 7.4 7.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 18.1 18.1 13.4 ... 17.8 17.8 13.2 ... 15.8 15.8 12.9 ... 12.3 12.3 12.3 ... 9.8 9.8 9.8 ... 7.4 7.4 7.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 81 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 5 6 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–N 16Cr–12Ni–2Mo–Ti 16Cr–12Ni–2Mo–Ti Wld. pipe Wld. pipe Forgings Forgings Plate Plate SA–813 SA–814 SA–965 SA–965 SA–240 SA–240 TP316N TP316N F316N F316N 316Ti 316Ti S31651 S31651 S31651 S31651 S31635 S31635 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 7 8 9 10 11 12 17Cr–4Ni–6Mn 17Cr–4Ni–6Mn 17Cr–4Ni–6Mn 17Cr–4Ni–6Mn 17Cr–4Ni–6Mn 17Cr–4Ni–6Mn Plate Plate Plate Plate Plate Plate SA–240 SA–240 SA–666 SA–666 SA–240 SA–666 201–1 201–1 201–1 201–1 201–2 201–2 S20100 S20100 S20100 S20100 S20100 S20100 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 3 3 3 3 3 3 13 14 15 16 17Cr–7Ni 17Cr–7Ni 17.5Cr–17.5Ni–5.3Si 17.5Cr–17.5Ni–5.3Si Plate, sheet, strip Plate, sheet, strip Plate Plate SA–240 SA–240 SA–240 SA–240 301 301 ... ... S30100 S30100 S30601 S30601 ... ... Sol. ann. Sol. ann. ... ... ... ... 8 8 8 8 1 1 1 1 17 18 19 20 18Cr–3Ni–12Mn 18Cr–3Ni–12Mn 18Cr–3Ni–12Mn 18Cr–3Ni–12Mn Plate Plate Wld. tube Wld. tube SA–240 SA–240 SA–249 SA–249 XM–29 XM–29 XM–29 XM–29 S24000 S24000 S24000 S24000 ... ... ... ... ... ... ... ... 8 8 8 8 3 3 3 3 21 22 23 24 25 26 18Cr–3Ni–12Mn 18Cr–3Ni–12Mn 18Cr–3Ni–12Mn 18Cr–3Ni–12Mn 18Cr–3Ni–12Mn 18Cr–3Ni–12Mn Wld. Wld. Bar Bar Wld. Wld. tube tube SA–312 SA–312 SA–479 SA–479 SA–688 SA–688 XM–29 XM–29 XM–29 XM–29 TPXM–29 TPXM–29 S24000 S24000 S24000 S24000 S24000 S24000 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 3 3 3 3 3 3 27 28 29 30 18Cr–5Ni–3Mo 18Cr–5Ni–3Mo 18Cr–5Ni–3Mo 18Cr–5Ni–3Mo Smls. tube Wld. tube Smls. pipe Wld. pipe SA–789 SA–789 SA–790 SA–790 ... ... ... ... S31500 S31500 S31500 S31500 ... ... ... ... ... ... ... ... 10H 10H 10H 10H 1 1 1 1 31 32 33 34 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Forgings Forgings Forgings Forgings SA–182 SA–182 SA–965 SA–965 F304L F304L F304L F304L S30403 S30403 S30403 S30403 ... ... ... ... >5 >5 ... ... 8 8 8 8 1 1 1 1 35 36 37 38 39 40 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Forgings Forgings Smls. tube Smls. tube Plate Plate SA–182 SA–182 SA–213 SA–213 SA–240 SA–240 F304L F304L TP304L TP304L 304L 304L S30403 S30403 S30403 S30403 S30403 S30403 ... ... ... ... ... ... ≤5 ≤5 ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 41 42 43 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Wld. tube Wld. tube Wld. tube SA–249 SA–249 SA–249 TP304L TP304L TP304L S30403 ... S30403 ... S30403 ... ... ... ... 8 8 8 1 1 1 Line No. Nominal Composition Product Form pipe pipe Spec. No. 82 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 80 80 80 80 75 75 35 35 35 35 30 30 NP NP NP NP NP NP 800 800 800 NP NP NP NP NP 1200 1200 1500 1500 NP NP 650 650 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, W12 G5, W12 G5, G12, T7 G12, T8 G5, G12, T8 G12, T9 7 8 9 10 11 12 75 75 75 75 95 95 38 38 38 38 45 45 NP NP NP NP NP NP NP NP NP NP NP NP 300 300 300 300 300 300 300 300 300 300 300 300 HA–2 HA–2 HA–2 HA–2 HA–6 HA–6 ... G5 ... G5 ... ... 13 14 15 16 75 75 78 78 30 30 37 37 NP NP NP NP NP NP NP NP 800 800 500 500 NP NP NP NP HA–1 HA–1 HA–1 HA–1 G5 ... G5, H6 H6 17 18 19 20 100 100 100 100 55 55 55 55 NP NP NP NP NP NP NP NP 800 800 800 800 650 650 650 650 HA–6 HA–6 HA–6 HA–6 G5 ... G5, G24 G24 21 22 23 24 25 26 100 100 100 100 100 100 55 55 55 55 55 55 NP NP NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 800 650 650 650 650 650 650 HA–6 HA–6 HA–6 HA–6 HA–6 HA–6 G5, G24 G24 G5, G22 G22 G5, G24 G24 27 28 29 30 92 92 92 92 64 64 64 64 NP NP NP NP NP NP NP NP 750 750 750 750 650 650 650 650 HA–5 HA–5 HA–5 HA–5 G19 G19, G24 G19 G19, G24 31 32 33 34 65 65 65 65 25 25 25 25 800 800 800 800 800 NP 800 NP 1200 1200 1200 1200 650 650 650 650 HA–3 HA–3 HA–3 HA–3 G5, G21, T4 G21, T6 G5, G21, T4 G21, T6 35 36 37 38 39 40 70 70 70 70 70 70 25 25 25 25 25 25 800 800 800 800 800 800 800 NP 800 NP 800 NP 1200 1200 1200 1200 1200 1200 650 650 NP NP 650 650 HA–3 HA–3 HA–3 HA–3 HA–3 HA–3 G5, G21, T4 G21, T6 G5, G21, T4 G21, T6 G5, G21, T4 G21, T6 41 42 43 70 70 70 25 25 25 NP 800 800 800 NP NP NP 1200 1200 NP 650 650 HA–3 HA–3 HA–3 G5, W12 G5, G21, G24, T4 G21, G24, T6 83 Notes This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 22.9 22.9 22.9 22.9 20.0 20.0 ... ... ... ... ... ... 22.9 22.9 22.9 20.7 20.0 17.7 ... ... ... ... ... ... 22.0 22.0 22.0 19.0 20.0 15.8 21.5 21.5 21.5 17.6 19.4 14.3 21.2 21.2 21.2 16.5 17.8 13.2 21.0 21.0 21.0 15.6 16.8 12.4 20.5 20.5 20.5 15.2 16.5 12.2 20.0 20.0 20.0 14.9 16.2 12.0 19.6 19.6 19.6 14.5 16.0 11.9 19.2 19.2 19.2 14.2 15.9 11.8 ... ... 18.8 13.9 15.8 11.7 ... ... 18.5 13.7 15.7 11.6 7 8 9 10 11 12 21.4 21.4 21.4 21.4 27.1 27.1 ... ... ... ... ... ... 18.7 18.7 18.7 18.7 22.8 22.8 ... ... ... ... ... ... 16.6 17.2 16.6 17.2 19.7 19.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16 20.0 20.0 22.3 22.3 ... ... ... ... 17.5 16.1 22.3 20.3 ... ... ... ... 15.7 14.4 21.1 18.1 15.4 13.5 20.0 16.5 15.4 13.0 18.9 15.1 15.4 12.5 ... ... 15.4 12.2 ... ... 15.3 11.9 ... ... 15.0 11.5 ... ... 14.6 11.1 ... ... ... ... ... ... ... ... ... ... 17 18 19 20 28.6 28.6 24.3 24.3 ... ... ... ... 27.9 27.9 23.7 23.7 ... ... ... ... 26.0 25.0 22.1 21.3 24.9 21.9 21.2 18.7 24.3 20.1 20.7 17.1 23.8 19.2 20.2 16.3 23.4 18.8 19.9 16.0 23.0 18.5 19.5 15.7 22.4 18.2 19.1 15.4 21.8 17.8 18.5 15.1 ... ... ... ... ... ... ... ... 21 22 23 24 25 26 24.3 24.3 28.6 28.6 24.3 24.3 ... ... ... ... ... ... 23.7 23.7 27.9 27.9 23.7 23.7 ... ... ... ... ... ... 22.1 21.3 26.0 25.0 22.1 21.3 21.2 18.7 24.9 21.9 21.2 18.7 20.7 17.1 24.3 20.1 20.7 17.1 20.2 16.3 23.8 19.2 20.2 16.3 19.9 16.0 23.4 18.8 19.9 16.0 19.5 15.7 23.0 18.5 19.5 15.7 19.1 15.4 22.4 18.2 19.1 15.4 18.5 15.1 21.8 17.8 18.5 15.1 ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 26.3 22.3 26.3 22.3 ... ... ... ... 25.4 21.6 25.4 21.6 ... ... ... ... 24.4 20.7 24.4 20.7 24.2 20.6 24.2 20.6 24.2 20.6 24.2 20.6 24.2 20.6 24.2 20.6 24.2 20.6 24.2 20.6 24.2 20.6 24.2 20.6 24.2 20.6 24.2 20.6 ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 16.7 16.7 16.7 16.7 ... ... ... ... 16.7 14.3 16.7 14.3 ... ... ... ... 16.2 12.8 16.2 12.8 15.6 11.7 15.6 11.7 14.7 10.9 14.7 10.9 14.0 10.4 14.0 10.4 13.7 10.2 13.7 10.2 13.5 10.0 13.5 10.0 13.3 9.8 13.3 9.8 13.0 9.7 13.0 9.7 12.8 9.5 12.8 9.5 11.9 9.3 11.9 9.3 35 36 37 38 39 40 16.7 16.7 16.7 16.7 16.7 16.7 ... ... ... ... ... ... 16.7 14.3 16.7 14.3 16.7 14.3 ... ... ... ... ... ... 16.7 12.8 16.7 12.8 16.7 12.8 15.8 11.7 15.8 11.7 15.8 11.7 14.7 10.9 14.7 10.9 14.7 10.9 14.0 10.4 14.0 10.4 14.0 10.4 13.7 10.2 13.7 10.2 13.7 10.2 13.5 10.0 13.5 10.0 13.5 10.0 13.3 9.8 13.3 9.8 13.3 9.8 13.0 9.7 13.0 9.7 13.0 9.7 12.8 9.5 12.8 9.5 12.8 9.5 11.9 9.3 11.9 9.3 11.9 9.3 41 42 43 16.7 14.2 14.2 ... ... ... 16.7 14.2 12.1 ... ... ... 16.7 14.2 10.9 15.8 13.4 9.9 14.7 12.5 9.3 14.0 11.9 8.8 13.7 11.7 8.6 13.5 11.4 8.5 13.3 11.3 8.3 13.0 11.1 8.2 ... 10.9 8.1 ... 10.1 7.9 84 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... 18.1 13.4 15.5 11.5 ... ... 17.8 13.2 15.3 11.4 ... ... 15.8 12.9 15.1 11.2 ... ... 12.3 12.3 12.3 11.0 ... ... 9.8 9.8 9.8 9.8 ... ... 7.4 7.4 7.4 7.4 ... ... ... ... 5.5 5.5 ... ... ... ... 4.1 4.1 ... ... ... ... 3.1 3.1 ... ... ... ... 2.3 2.3 ... ... ... ... 1.7 1.7 ... ... ... ... 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 11 12 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 24 25 26 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 9.9 9.1 9.9 9.1 7.8 7.8 7.8 7.8 6.3 6.3 6.3 6.3 5.1 5.1 5.1 5.1 4.0 4.0 4.0 4.0 3.2 3.2 3.2 3.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 38 39 40 9.9 9.1 9.9 9.1 9.9 9.1 7.8 7.8 7.8 7.8 7.8 7.8 6.3 6.3 6.3 6.3 6.3 6.3 5.1 5.1 5.1 5.1 5.1 5.1 4.0 4.0 4.0 4.0 4.0 4.0 3.2 3.2 3.2 3.2 3.2 3.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 ... 8.4 7.7 ... 6.6 6.6 ... 5.4 5.4 ... 4.3 4.3 ... 3.4 3.4 ... 2.7 2.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 85 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Smls. & wld. pipe Smls. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP304L TP304L TP304L TP304L S30403 S30403 S30403 S30403 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 5 6 7 8 9 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Wld. pipe SA–358 Smls. & wld. fittings SA–403 Wld. pipe SA–409 Bar SA–479 Bar SA–479 304L 304L TP304L 304L 304L S30403 S30403 S30403 S30403 S30403 1 ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 10 11 12 13 14 15 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Wld. Wld. Wld. Wld. Wld. Bar SA–688 SA–688 SA–688 SA–813 SA–814 SA/JIS G4303 TP304L TP304L TP304L TP304L TP304L SUS304L S30403 S30403 S30403 S30403 S30403 ... ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 16 17 18 19 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Forgings Forgings Forgings Forgings SA–182 SA–182 SA–182 SA–182 F304 F304 F304H F304H S30400 S30400 S30409 S30409 ... ... ... ... >5 >5 >5 >5 8 8 8 8 1 1 1 1 20 21 22 23 24 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Castings Castings Castings Castings Castings SA–351 SA–351 SA–351 SA–351 SA–351 CF3 CF3 CF8 CF8 CF8 J92500 J92500 J92600 J92600 J92600 ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 25 26 27 28 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Smls. pipe Smls. pipe Cast pipe Cast pipe SA–376 SA–376 SA–451 SA–451 TP304 TP304 CPF3 CPF8 S30400 S30400 J92500 J92600 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 29 30 31 32 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Forgings Forgings Forgings Forgings SA–965 SA–965 SA–965 SA–965 F304 F304 F304H F304H S30400 S30400 S30409 S30409 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 33 34 35 36 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Forgings Forgings Forgings Forgings SA–182 SA–182 SA–182 SA–182 F304 F304 F304H F304H S30400 S30400 S30409 S30409 ... ... ... ... ≤5 ≤5 ≤5 ≤5 8 8 8 8 1 1 1 1 37 38 39 40 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Smls. Smls. Smls. Smls. SA–213 SA–213 SA–213 SA–213 TP304 TP304 TP304H TP304H S30400 S30400 S30409 S30409 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 41 42 43 44 45 46 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Plate Plate Plate Plate Plate Plate SA–240 SA–240 SA–240 SA–240 SA–240 SA–240 302 302 304 304 304H 304H S30200 S30200 S30400 S30400 S30409 S30409 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 Line No. Nominal Composition Product Form tube tube tube pipe pipe tube tube tube tube Spec. No. 86 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 70 70 70 70 25 25 25 25 800 800 800 800 800 NP NP NP 1200 1200 1200 1200 650 650 650 650 HA–3 HA–3 HA–3 HA–3 G5, G21, T4, W12, W14 G21, T6 G5, G21, G24, T4 G21, G24, T6 5 6 7 8 9 70 70 70 70 70 25 25 25 25 25 NP NP NP 800 800 800 800 800 800 NP NP 1200 NP 1200 1200 NP 650 NP 650 650 HA–3 HA–3 HA–3 HA–3 HA–3 G5, W12 G5, T4, W12, W14 G5, W12 G5, G21, G22, T4 G21, G22, T6 10 11 12 13 14 15 70 70 70 70 70 70 25 25 25 25 25 25 NP NP NP NP NP 800 800 NP NP 800 800 800 NP 1200 1200 NP NP 1200 NP 650 650 NP NP NP HA–3 HA–3 HA–3 HA–3 HA–3 HA–3 G5, W12 G5, G24, T4 G24, T6 G5, W12 G5, W12 G5, G21, G22, T4 16 17 18 19 70 70 70 70 30 30 30 30 1500 1500 1500 1500 800 NP 800 NP 1500 1500 1500 1500 650 650 NP NP HA–1 HA–1 HA–1 HA–1 G5, G12, T7 G12, T8 G5, T7 T8 20 21 22 23 24 70 70 70 70 70 30 30 30 30 30 NP NP 1500 1500 NP 800 NP 800 NP NP 800 800 NP 1500 1500 650 650 NP 650 650 HA–3 HA–3 HA–1 HA–1 HA–1 G1, G1, G1, G1, G1, 25 26 27 28 70 70 70 70 30 30 30 30 NP NP NP NP 800 NP 800 800 1500 1500 NP NP 650 650 NP NP HA–1 HA–1 HA–3 HA–1 G5, G12, G12, S9, G5, G16, G5, G16, 29 30 31 32 70 70 70 70 30 30 30 30 1500 1500 NP NP 800 NP 800 NP 1500 1500 1500 1500 650 650 NP NP HA–1 HA–1 HA–1 HA–1 G5, G12, T7 G12, T8 G5, T7 T8 33 34 35 36 75 75 75 75 30 30 30 30 1500 1500 1500 1500 NP 800 NP 800 1500 1500 1500 1500 NP NP NP NP HA–1 HA–1 HA–1 HA–1 G12, T8 G5, G12, T7 T8 G5, T7 37 38 39 40 75 75 75 75 30 30 30 30 1500 1500 1500 1500 NP 800 NP 800 1500 1500 1500 1500 NP NP NP NP HA–1 HA–1 HA–1 HA–1 G12, T8 G5, G12, T7 T8 G5, T7 41 42 43 44 45 46 75 75 75 75 75 75 30 30 30 30 30 30 NP NP 1500 1500 1500 1500 NP NP NP 800 800 NP 750 750 1500 1500 1500 1500 650 650 650 650 NP NP HA–1 HA–1 HA–1 HA–1 HA–1 HA–1 G5 ... G12, T8 G5, G12, H1, T7 G5, T7 T8 87 Notes G5, G16, G17, G19 G5, G12, G16, G12, G19, H1, G5, G12, G19, S9, T7 T8 G17, G19 G17, G19 G19 G17, G19, H1, T6 T7 T6 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 16.7 16.7 14.2 14.2 ... ... ... ... 16.7 14.3 14.2 12.1 ... ... ... ... 16.7 12.8 14.2 10.9 15.8 11.7 13.4 9.9 14.7 10.9 12.5 9.3 14.0 10.4 11.9 8.8 13.7 10.2 11.7 8.6 13.5 10.0 11.4 8.5 13.3 9.8 11.3 8.3 13.0 9.7 11.1 8.2 12.8 9.5 10.9 8.1 11.9 9.3 10.1 7.9 5 6 7 8 9 16.7 16.7 16.7 16.7 16.7 ... ... ... ... ... 16.7 16.7 16.7 16.7 14.3 ... ... ... ... ... 16.7 16.7 16.7 16.7 12.8 15.8 15.8 15.8 15.8 11.7 14.7 14.7 14.7 14.7 10.9 14.0 14.0 14.0 14.0 10.4 13.7 13.7 13.7 13.7 10.2 13.5 13.5 13.5 13.5 10.0 13.3 13.3 13.3 13.3 9.8 13.0 13.0 13.0 13.0 9.7 ... 12.8 ... 12.8 9.5 ... 11.9 ... 11.9 9.3 10 11 12 13 14 15 16.7 14.2 14.2 16.7 16.7 16.7 ... ... ... ... ... ... 16.7 14.2 12.1 16.7 16.7 16.7 ... ... ... ... ... ... 16.7 14.2 10.9 16.7 16.7 16.7 15.8 13.4 9.9 15.8 15.8 15.8 14.7 12.5 9.3 14.7 14.7 14.7 14.0 11.9 8.8 14.0 14.0 14.0 13.7 11.7 8.6 13.7 13.7 13.7 13.5 11.4 8.5 13.5 13.5 13.5 13.3 11.3 8.3 13.3 13.3 13.3 13.0 11.1 8.2 13.0 13.0 13.0 ... 10.9 8.1 ... ... 12.8 ... 10.1 7.9 ... ... 11.9 16 17 18 19 20.0 20.0 20.0 20.0 ... ... ... ... 18.9 16.7 18.9 16.7 ... ... ... ... 17.7 15.0 17.7 15.0 17.1 13.8 17.1 13.8 16.9 12.9 16.9 12.9 16.6 12.3 16.6 12.3 16.2 12.0 16.2 12.0 15.8 11.7 15.8 11.7 15.5 11.5 15.5 11.5 15.2 11.2 15.2 11.2 14.9 11.0 14.9 11.0 14.6 10.8 14.6 10.8 20 21 22 23 24 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 18.9 16.7 18.9 16.7 18.9 ... ... ... ... ... 17.7 15.0 17.7 15.0 17.7 17.1 13.8 17.1 13.8 17.1 16.9 12.9 16.9 12.9 16.9 16.6 12.3 16.6 12.3 16.6 16.2 12.0 16.2 12.0 16.2 15.8 11.7 15.8 11.7 15.8 15.5 11.5 15.5 11.5 15.5 15.2 11.2 15.2 11.2 15.2 ... ... 14.9 11.0 14.9 ... ... 14.6 10.8 14.6 25 26 27 28 20.0 20.0 20.0 20.0 ... ... ... ... 18.9 16.7 18.9 18.9 ... ... ... ... 17.7 15.0 17.7 17.7 17.1 13.8 17.1 17.1 16.9 12.9 16.9 16.9 16.6 12.3 16.6 16.6 16.2 12.0 16.2 16.2 15.8 11.7 15.8 15.8 15.5 11.5 15.5 15.5 15.2 11.2 15.2 15.2 14.9 11.0 ... ... 14.6 10.8 ... ... 29 30 31 32 20.0 20.0 20.0 20.0 ... ... ... ... 18.9 16.7 18.9 16.7 ... ... ... ... 17.7 15.0 17.7 15.0 17.1 13.8 17.1 13.8 16.9 12.9 16.9 12.9 16.6 12.3 16.6 12.3 16.2 12.0 16.2 12.0 15.8 11.7 15.8 11.7 15.5 11.5 15.5 11.5 15.2 11.2 15.2 11.2 14.9 11.0 14.9 11.0 14.6 10.8 14.6 10.8 33 34 35 36 20.0 20.0 20.0 20.0 ... ... ... ... 16.7 20.0 16.7 20.0 ... ... ... ... 15.0 18.9 15.0 18.9 13.8 18.3 13.8 18.3 12.9 17.5 12.9 17.5 12.3 16.6 12.3 16.6 12.0 16.2 12.0 16.2 11.7 15.8 11.7 15.8 11.5 15.5 11.5 15.5 11.2 15.2 11.2 15.2 11.0 14.9 11.0 14.9 10.8 14.6 10.8 14.6 37 38 39 40 20.0 20.0 20.0 20.0 ... ... ... ... 16.7 20.0 16.7 20.0 ... ... ... ... 15.0 18.9 15.0 18.9 13.8 18.3 13.8 18.3 12.9 17.5 12.9 17.5 12.3 16.6 12.3 16.6 12.0 16.2 12.0 16.2 11.7 15.8 11.7 15.8 11.5 15.5 11.5 15.5 11.2 15.2 11.2 15.2 11.0 14.9 11.0 14.9 10.8 14.6 10.8 14.6 41 42 43 44 45 46 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 16.7 16.7 20.0 20.0 16.7 ... ... ... ... ... ... 18.9 15.0 15.0 18.9 18.9 15.0 18.3 13.8 13.8 18.3 18.3 13.8 17.5 12.9 12.9 17.5 17.5 12.9 16.6 12.3 12.3 16.6 16.6 12.3 16.2 12.0 12.0 16.2 16.2 12.0 15.8 11.7 11.7 15.8 15.8 11.7 15.5 11.5 11.5 15.5 15.5 11.5 ... ... 11.2 15.2 15.2 11.2 ... ... 11.0 14.9 14.9 11.0 ... ... 10.8 14.6 14.6 10.8 88 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 9.9 9.1 8.4 7.7 7.8 7.8 6.6 6.6 6.3 6.3 5.4 5.4 5.1 5.1 4.3 4.3 4.0 4.0 3.4 3.4 3.2 3.2 2.7 2.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 9 ... 9.9 ... 9.9 9.1 ... 7.8 ... 7.8 7.8 ... 6.3 ... 6.3 6.3 ... 5.1 ... 5.1 5.1 ... 4.0 ... 4.0 4.0 ... 3.2 ... 3.2 3.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 14 15 ... 8.4 7.7 ... ... 9.9 ... 6.6 6.6 ... ... 7.8 ... 5.4 5.4 ... ... 6.3 ... 4.3 4.3 ... ... 5.1 ... 3.4 3.4 ... ... 4.0 ... 2.7 2.7 ... ... 3.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 14.3 10.6 14.3 10.6 14.0 10.4 14.0 10.4 12.4 10.1 12.4 10.1 9.8 9.8 9.8 9.8 7.7 7.7 7.7 7.7 6.1 6.1 6.1 6.1 4.7 4.7 4.7 4.7 3.7 3.7 3.7 3.7 2.9 2.9 2.9 2.9 2.3 2.3 2.3 2.3 1.8 1.8 1.8 1.8 1.4 1.4 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 24 ... ... 14.3 10.6 14.3 ... ... 12.2 10.4 12.2 ... ... 9.5 9.5 9.5 ... ... 7.5 7.5 7.5 ... ... 6.0 6.0 6.0 ... ... 4.8 4.8 4.8 ... ... 3.9 3.9 3.9 ... ... 3.3 3.3 3.3 ... ... 2.7 2.7 2.7 ... ... 2.3 2.3 2.3 ... ... 2.0 2.0 2.0 ... ... 1.7 1.7 1.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 14.3 10.6 ... ... 14.0 10.4 ... ... 12.4 10.1 ... ... 9.8 9.8 ... ... 7.7 7.7 ... ... 6.1 6.1 ... ... 4.7 4.7 ... ... 3.7 3.7 ... ... 2.9 2.9 ... ... 2.3 2.3 ... ... 1.8 1.8 ... ... 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 14.3 10.6 14.3 10.6 14.0 10.4 14.0 10.4 12.4 10.1 12.4 10.1 9.8 9.8 9.8 9.8 7.7 7.7 7.7 7.7 6.1 6.1 6.1 6.1 4.7 4.7 4.7 4.7 3.7 3.7 3.7 3.7 2.9 2.9 2.9 2.9 2.3 2.3 2.3 2.3 1.8 1.8 1.8 1.8 1.4 1.4 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 36 10.6 14.3 10.6 14.3 10.4 14.0 10.4 14.0 10.1 12.4 10.1 12.4 9.8 9.8 9.8 9.8 7.7 7.7 7.7 7.7 6.1 6.1 6.1 6.1 4.7 4.7 4.7 4.7 3.7 3.7 3.7 3.7 2.9 2.9 2.9 2.9 2.3 2.3 2.3 2.3 1.8 1.8 1.8 1.8 1.4 1.4 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 10.6 14.3 10.6 14.3 10.4 14.0 10.4 14.0 10.1 12.4 10.1 12.4 9.8 9.8 9.8 9.8 7.7 7.7 7.7 7.7 6.1 6.1 6.1 6.1 4.7 4.7 4.7 4.7 3.7 3.7 3.7 3.7 2.9 2.9 2.9 2.9 2.3 2.3 2.3 2.3 1.8 1.8 1.8 1.8 1.4 1.4 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 45 46 ... ... 10.6 14.3 14.3 10.6 ... ... 10.4 14.0 14.0 10.4 ... ... 10.1 12.4 12.4 10.1 ... ... 9.8 9.8 9.8 9.8 ... ... 7.7 7.7 7.7 7.7 ... ... 6.1 6.1 6.1 6.1 ... ... 4.7 4.7 4.7 4.7 ... ... 3.7 3.7 3.7 3.7 ... ... 2.9 2.9 2.9 2.9 ... ... 2.3 2.3 2.3 2.3 ... ... 1.8 1.8 1.8 1.8 ... ... 1.4 1.4 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 89 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Wld. Wld. Wld. Wld. tube tube tube tube SA–249 SA–249 SA–249 SA–249 TP304 TP304 TP304 TP304 S30400 S30400 S30400 S30400 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 5 6 7 8 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Wld. Wld. Wld. Wld. tube tube tube tube SA–249 SA–249 SA–249 SA–249 TP304H TP304H TP304H TP304H S30409 S30409 S30409 S30409 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 9 10 11 12 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Smls. & wld. pipe Smls. & wld. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP304 TP304 TP304 TP304 S30400 S30400 S30400 S30400 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 13 14 15 16 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Smls. & wld. pipe Smls. & wld. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP304H TP304H TP304H TP304H S30409 S30409 S30409 S30409 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 17 18 19 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Wld. pipe Wld. pipe Wld. pipe SA–358 SA–358 SA–358 304 304H 304LN S30400 1 S30409 1 S30453 1 ... ... ... 8 8 8 1 1 1 20 21 22 23 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Smls. Smls. Smls. Smls. SA–376 SA–376 SA–376 SA–376 TP304 TP304 TP304H TP304H S30400 S30400 S30409 S30409 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 24 25 26 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Smls. & wld. fittings SA–403 Smls. & wld. fittings SA–403 Wld. pipe SA–409 304 304H TP304 S30400 ... S30409 ... S30400 ... ... ... ... 8 8 8 1 1 1 27 28 29 30 31 32 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Bar Bar Bar Bar Bar Bar SA–479 SA–479 SA–479 SA–479 SA–479 SA–479 302 302 304 304 304H 304H S30200 S30200 S30400 S30400 S30409 S30409 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 33 34 35 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Wld. tube Wld. tube Wld. tube SA–688 SA–688 SA–688 TP304 TP304 TP304 S30400 ... S30400 ... S30400 ... ... ... ... 8 8 8 1 1 1 36 37 38 39 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Wld. Wld. Wld. Wld. SA–813 SA–813 SA–814 SA–814 TP304 TP304H TP304 TP304H S30400 S30409 S30400 S30409 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 40 41 42 43 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Bar Bar Plate Plate SA/JIS G4303 SA/JIS G4303 SA/EN 10028–7 SA/EN 10028–7 SUS302 SUS304 X5CrNi18–10 X5CrNi18–10 ... ... ... ... ... ... ... ... ... ... ≤3 ≤3 8 8 8 8 1 1 1 1 Line No. Nominal Composition Product Form pipe pipe pipe pipe pipe pipe pipe pipe Spec. No. 90 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 75 75 75 75 30 30 30 30 1500 1500 1500 1500 NP 800 NP NP NP NP 1500 1500 NP NP 650 650 HA–1 HA–1 HA–1 HA–1 G12, T8, W13 G5, G12, T7, W12, W13 G3, G5, G12, G24, T7 G3, G12, G24, T8 5 6 7 8 75 75 75 75 30 30 30 30 1500 1500 1500 1500 NP 800 NP NP NP NP 1500 1500 NP NP NP NP HA–1 HA–1 HA–1 HA–1 T8, G5, G3, G3, 9 10 11 12 75 75 75 75 30 30 30 30 1500 1500 1500 1500 800 NP NP NP 1500 1500 1500 1500 650 650 650 650 HA–1 HA–1 HA–1 HA–1 G5, G12, T7, W12, W13, W14 G12, T8, W13, W14 G3, G5, G12, G24, T7 G3, G12, G24, T8 13 14 15 16 75 75 75 75 30 30 30 30 1500 1500 1500 1500 800 NP NP NP 1500 1500 1500 1500 NP NP NP NP HA–1 HA–1 HA–1 HA–1 G5, T8, G3, G3, 17 18 19 75 75 75 30 30 30 NP NP NP 800 800 800 NP NP NP NP NP NP HA–1 HA–1 HA–1 G5, W12 G5, W12 G5, W12 20 21 22 23 75 75 75 75 30 30 30 30 1500 1500 1500 1500 800 NP 800 NP 1500 1500 1500 1500 650 650 NP NP HA–1 HA–1 HA–1 HA–1 G5, G12, H1, S11, T7 G12, H1, S11, T8 G5, H1, T7 H1, T8 24 25 26 75 75 75 30 30 30 NP NP NP 800 800 800 1500 1500 NP 650 NP NP HA–1 HA–1 HA–1 G5, G12, T7, W12, W14 G5, T7, W12, W14 G5, W12 27 28 29 30 31 32 75 75 75 75 75 75 30 30 30 30 30 30 NP NP 1500 1500 1500 1500 800 NP 800 NP 800 NP 750 750 1500 1500 1500 1500 650 650 650 650 NP NP HA–1 HA–1 HA–1 HA–1 HA–1 HA–1 G5, G24 G22 G5, G12, G22, T7 G12, G22, T8 G5, G22, T7 G22, T8 33 34 35 75 75 75 30 30 30 NP NP NP 800 NP NP NP 1500 1500 NP 650 650 HA–1 HA–1 HA–1 G5, W12 G5, G12, G24, T7 G12, G24, T8 36 37 38 39 75 75 75 75 30 30 30 30 NP NP NP NP 800 800 800 800 NP NP NP NP NP NP NP NP HA–1 HA–1 HA–1 HA–1 G5, G5, G5, G5, 40 41 42 43 75 75 75 75 30 30 31 31 NP 1500 NP NP 800 800 NP NP 750 1500 1022 1022 NP NP NP NP HA–1 HA–1 HA–1 HA–1 G5, G24 G5, G12, G22, T7 G5 ... 91 Notes W13 T7, W12, W13 G5, G24, T7 G24, T8 T7, W12, W13, W14 W13, W14 G5, G24, T7 G24, T8 W12 W12 W12 W12 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 20.0 20.0 17.0 17.0 ... ... ... ... 16.7 20.0 17.0 14.2 ... ... ... ... 15.0 18.9 16.1 12.7 13.8 18.3 15.5 11.7 12.9 17.5 14.8 11.0 12.3 16.6 14.1 10.4 12.0 16.2 13.8 10.2 11.7 15.8 13.5 10.0 11.5 15.5 13.2 9.8 11.2 15.2 12.9 9.6 11.0 14.9 12.6 9.4 10.8 14.6 12.4 9.2 5 6 7 8 20.0 20.0 17.0 17.0 ... ... ... ... 16.7 20.0 17.0 14.2 ... ... ... ... 15.0 18.9 16.1 12.7 13.8 18.3 15.5 11.7 12.9 17.5 14.8 11.0 12.3 16.6 14.1 10.4 12.0 16.2 13.8 10.2 11.7 15.8 13.5 10.0 11.5 15.5 13.2 9.8 11.2 15.2 12.9 9.6 11.0 14.9 12.6 9.4 10.8 14.6 12.4 9.2 9 10 11 12 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 16.7 17.0 14.2 ... ... ... ... 18.9 15.0 16.1 12.7 18.3 13.8 15.5 11.7 17.5 12.9 14.8 11.0 16.6 12.3 14.1 10.4 16.2 12.0 13.8 10.2 15.8 11.7 13.5 10.0 15.5 11.5 13.2 9.8 15.2 11.2 12.9 9.6 14.9 11.0 12.6 9.4 14.6 10.8 12.4 9.2 13 14 15 16 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 16.7 17.0 14.2 ... ... ... ... 18.9 15.0 16.1 12.7 18.3 13.8 15.5 11.7 17.5 12.9 14.8 11.0 16.6 12.3 14.1 10.4 16.2 12.0 13.8 10.2 15.8 11.7 13.5 10.0 15.5 11.5 13.2 9.8 15.2 11.2 12.9 9.6 14.9 11.0 12.6 9.4 14.6 10.8 12.4 9.2 17 18 19 20.0 20.0 20.0 ... ... ... 20.0 20.0 20.0 ... ... ... 18.9 18.9 18.9 18.3 18.3 18.3 17.5 17.5 17.5 16.6 16.6 16.6 16.2 16.2 16.2 15.8 15.8 15.8 15.5 15.5 15.5 15.2 15.2 15.2 ... ... ... ... ... ... 20 21 22 23 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 16.7 20.0 16.7 ... ... ... ... 18.9 15.0 18.9 15.0 18.3 13.8 18.3 13.8 17.5 12.9 17.5 12.9 16.6 12.3 16.6 12.3 16.2 12.0 16.2 12.0 15.8 11.7 15.8 11.7 15.5 11.5 15.5 11.5 15.2 11.2 15.2 11.2 14.9 11.0 14.9 11.0 14.6 10.8 14.6 10.8 24 25 26 20.0 20.0 20.0 ... ... ... 20.0 20.0 20.0 ... ... ... 18.9 18.9 18.9 18.3 18.3 18.3 17.5 17.5 17.5 16.6 16.6 16.6 16.2 16.2 16.2 15.8 15.8 15.8 15.5 15.5 15.5 15.2 15.2 15.2 14.9 14.9 ... 14.6 14.6 ... 27 28 29 30 31 32 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 16.7 20.0 16.7 20.0 16.7 ... ... ... ... ... ... 18.9 15.0 18.9 15.0 18.9 15.0 18.3 13.8 18.3 13.8 18.3 13.8 17.5 12.9 17.5 12.9 17.5 12.9 16.6 12.3 16.6 12.3 16.6 12.3 16.2 12.0 16.2 12.0 16.2 12.0 15.8 11.7 15.8 11.7 15.8 11.7 15.5 11.5 15.5 11.5 15.5 11.5 15.2 ... 15.2 11.2 15.2 11.2 ... ... 14.9 11.0 14.9 11.0 ... ... 14.6 10.8 14.6 10.8 33 34 35 20.0 17.0 17.0 ... ... ... 20.0 17.0 14.2 ... ... ... 18.9 16.1 12.7 18.3 15.5 11.7 17.5 14.8 11.0 16.6 14.1 10.4 16.2 13.8 10.2 15.8 13.5 10.0 15.5 13.2 9.8 15.2 12.9 9.6 ... 12.6 9.4 ... 12.4 9.2 36 37 38 39 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 20.0 20.0 ... ... ... ... 18.9 18.9 18.9 18.9 18.3 18.3 18.3 18.3 17.5 17.5 17.5 17.5 16.6 16.6 16.6 16.6 16.2 16.2 16.2 16.2 15.8 15.8 15.8 15.8 15.5 15.5 15.5 15.5 15.2 15.2 15.2 15.2 ... ... ... ... ... ... ... ... 40 41 42 43 20.0 20.0 20.3 20.3 ... ... ... ... 20.0 20.0 20.3 16.9 ... ... ... ... 18.9 18.9 19.0 15.2 18.3 18.3 18.4 14.0 17.5 17.5 17.7 13.1 16.6 16.6 16.8 12.5 16.2 16.2 16.4 12.2 15.8 15.8 16.1 11.9 15.5 15.5 15.7 11.7 15.2 15.2 15.4 11.4 ... 14.9 15.1 11.2 ... 14.6 14.8 11.0 92 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 10.6 14.3 12.1 9.0 10.4 14.0 11.9 8.8 10.1 12.4 10.5 8.6 9.8 9.8 8.3 8.3 7.7 7.7 6.6 6.6 6.1 6.1 5.2 5.2 4.7 4.7 4.0 4.0 3.7 3.7 3.1 3.1 2.9 2.9 2.5 2.5 2.3 2.3 2.0 2.0 1.8 1.8 1.6 1.6 1.4 1.4 1.2 1.2 ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 10.6 14.3 12.1 9.0 10.4 14.0 11.9 8.8 10.1 12.4 10.5 8.6 9.8 9.8 8.3 8.3 7.7 7.7 6.6 6.6 6.1 6.1 5.2 5.2 4.7 4.7 4.0 4.0 3.7 3.7 3.1 3.1 2.9 2.9 2.5 2.5 2.3 2.3 2.0 2.0 1.8 1.8 1.6 1.6 1.4 1.4 1.2 1.2 ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 14.3 10.6 12.1 9.0 14.0 10.4 11.9 8.8 12.4 10.1 10.5 8.6 9.8 9.8 8.3 8.3 7.7 7.7 6.6 6.6 6.1 6.1 5.2 5.2 4.7 4.7 4.0 4.0 3.7 3.7 3.1 3.1 2.9 2.9 2.5 2.5 2.3 2.3 2.0 2.0 1.8 1.8 1.6 1.6 1.4 1.4 1.2 1.2 ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16 14.3 10.6 12.1 9.0 14.0 10.4 11.9 8.8 12.4 10.1 10.5 8.6 9.8 9.8 8.3 8.3 7.7 7.7 6.6 6.6 6.1 6.1 5.2 5.2 4.7 4.7 4.0 4.0 3.7 3.7 3.1 3.1 2.9 2.9 2.5 2.5 2.3 2.3 2.0 2.0 1.8 1.8 1.6 1.6 1.4 1.4 1.2 1.2 ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 14.3 10.6 14.3 10.6 14.0 10.4 14.0 10.4 12.4 10.1 12.4 10.1 9.8 9.8 9.8 9.8 7.7 7.7 7.7 7.7 6.1 6.1 6.1 6.1 4.7 4.7 4.7 4.7 3.7 3.7 3.7 3.7 2.9 2.9 2.9 2.9 2.3 2.3 2.3 2.3 1.8 1.8 1.8 1.8 1.4 1.4 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 14.3 14.3 ... 14.0 14.0 ... 12.4 12.4 ... 9.8 9.8 ... 7.7 7.7 ... 6.1 6.1 ... 4.7 4.7 ... 3.7 3.7 ... 2.9 2.9 ... 2.3 2.3 ... 1.8 1.8 ... 1.4 1.4 ... ... ... ... ... ... ... ... ... ... 27 28 29 30 31 32 ... ... 14.3 10.6 14.3 10.6 ... ... 14.0 10.4 14.0 10.4 ... ... 12.4 10.1 12.4 10.1 ... ... 9.8 9.8 9.8 9.8 ... ... 7.7 7.7 7.7 7.7 ... ... 6.1 6.1 6.1 6.1 ... ... 4.7 4.7 4.7 4.7 ... ... 3.7 3.7 3.7 3.7 ... ... 2.9 2.9 2.9 2.9 ... ... 2.3 2.3 2.3 2.3 ... ... 1.8 1.8 1.8 1.8 ... ... 1.4 1.4 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 ... 12.1 9.0 ... 11.9 8.8 ... 10.5 8.6 ... 8.3 8.3 ... 6.6 6.6 ... 5.2 5.2 ... 4.0 4.0 ... 3.1 3.1 ... 2.5 2.5 ... 2.0 2.0 ... 1.6 1.6 ... 1.2 1.2 ... ... ... ... ... ... ... ... ... 36 37 38 39 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 40 41 42 43 ... 14.3 14.5 10.7 ... 14.0 14.2 10.5 ... 12.4 12.4 10.3 ... 9.8 ... ... ... 7.7 ... ... ... 6.1 ... ... ... 4.7 ... ... ... 3.7 ... ... ... 2.9 ... ... ... 2.3 ... ... ... 1.8 ... ... ... 1.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... 93 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 5 6 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni 18Cr–8Ni Castings Castings Castings Castings Cast pipe Cast pipe SA–351 SA–351 SA–351 SA–351 SA–451 SA–451 CF3A CF3A CF8A CF8A CPF3A CPF8A J92500 J92500 J92600 J92600 J92500 J92600 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 7 8 9 10 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N Forgings Forgings Forgings Smls. tube SA–182 SA–965 SA–182 SA–213 F304LN F304LN F304LN TP304LN S30453 S30453 S30453 S30453 ... ... ... ... >5 ... ≤5 ... 8 8 8 8 1 1 1 1 11 12 13 14 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N Plate Wld. tube Smls. & wld. pipe Smls. pipe SA–240 SA–249 SA–312 SA–376 304LN TP304LN TP304LN TP304LN S30453 S30453 S30453 S30453 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 15 16 17 18 19 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N Smls. & wld. fittings SA–403 Bar SA–479 Wld. tube SA–688 Wld. pipe SA–813 Wld. pipe SA–814 304LN 304LN TP304LN TP304LN TP304LN S30453 S30453 S30453 S30453 S30453 WP ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 20 21 22 23 24 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N Forgings Smls. tube Smls. tube Plate Plate SA–182 SA–213 SA–213 SA–240 SA–240 F304N TP304N TP304N 304N 304N S30451 S30451 S30451 S30451 S30451 ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 25 26 27 28 29 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N Wld. Wld. Wld. Wld. Wld. SA–249 SA–249 SA–249 SA–249 SA–249 TP304N TP304N TP304N TP304N TP304N S30451 S30451 S30451 S30451 S30451 ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 30 31 32 33 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N Smls. & wld. pipe Smls. & wld. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP304N TP304N TP304N TP304N S30451 S30451 S30451 S30451 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 34 35 36 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N Wld. pipe Smls. pipe Smls. pipe SA–358 SA–376 SA–376 304N TP304N TP304N S30451 1 S30451 ... S30451 ... ... ... ... 8 8 8 1 1 1 37 38 39 40 41 42 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N Smls. & wld. fittings SA–403 Bar SA–479 Bar SA–479 Wld. tube SA–688 Wld. tube SA–688 Wld. tube SA–688 304N 304N 304N TP304N TP304N TP304N S30451 S30451 S30451 S30451 S30451 S30451 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 43 44 45 46 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N 18Cr–8Ni–N Wld. pipe Wld. pipe Forgings Forgings TP304N TP304N F304N F304N S30451 S30451 S30451 S30451 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 Line No. Nominal Composition Product Form tube tube tube tube tube Spec. No. SA–813 SA–814 SA–965 SA–965 94 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 77 77 77 77 77 77 35 35 35 35 35 35 NP NP NP NP NP NP 650 NP 650 NP 650 650 700 700 650 650 NP NP 650 650 650 650 NP NP HA–3 HA–3 HA–1 HA–1 HA–3 HA–1 G1, G1, G1, G1, G5, G5, 7 8 9 10 70 70 75 75 30 30 30 30 NP NP NP NP 800 800 800 800 800 800 800 800 NP NP NP NP HA–1 HA–1 HA–1 HA–1 G5 G5 G5 G5 11 12 13 14 75 75 75 75 30 30 30 30 NP NP NP NP 800 800 800 800 800 800 800 800 NP NP NP NP HA–1 HA–1 HA–1 HA–1 G5 G5, W12, W14 G5, W12, W14 G5 15 16 17 18 19 75 75 75 75 75 30 30 30 30 30 NP NP NP NP NP 800 800 800 800 800 800 800 800 800 800 NP NP NP NP NP HA–1 HA–1 HA–1 HA–1 HA–1 G5, G5 G5, G5, G5, 20 21 22 23 24 80 80 80 80 80 35 35 35 35 35 NP 1200 1200 NP NP 800 800 NP 800 NP NP 1200 1200 1200 1200 NP NP NP 650 650 HA–1 HA–1 HA–1 HA–1 HA–1 G5 G5, G12, T7 G12, T8 G5, G12, T7 G12, T8 25 26 27 28 29 80 80 80 80 80 35 35 35 35 35 1200 1200 1200 1200 NP NP NP NP NP NP NP NP NP 1200 1200 NP NP NP 650 650 HA–1 HA–1 HA–1 HA–1 HA–1 G5, G12, T7, W13 G12, T8, W13 G3, G5, G12, T5 G3, G12, G24, T8 G5, G12, G24, T5 30 31 32 33 80 80 80 80 35 35 35 35 1200 1200 1200 1200 800 NP NP NP 1200 1200 1200 1200 650 650 650 650 HA–1 HA–1 HA–1 HA–1 G5, G12, T7, W12, W13, W14 G12, T8, W13, W14 G3, G5, G12, G24, T5 G3, G12, G24, T8 34 35 36 80 80 80 35 35 35 NP 1200 1200 800 800 NP NP 1200 1200 NP 650 650 HA–1 HA–1 HA–1 G5, W12 G5, G12, H1, T7 G12, H1, T8 37 38 39 40 41 42 80 80 80 80 80 80 35 35 35 35 35 35 NP 1200 1200 NP NP NP 800 NP 800 800 NP NP 1200 NP NP NP 1200 1200 650 NP NP NP 650 650 HA–1 HA–1 HA–1 HA–1 HA–1 HA–1 G5, T7, W12, W14 G12, T8 G5, G12, T7 G5, W12 G5, G12, G24, T7 G12, G24, T8 43 44 45 46 80 80 80 80 35 35 35 35 NP NP NP NP 800 800 800 NP NP NP 1200 1200 NP NP 650 650 HA–1 HA–1 HA–1 HA–1 G5, W12 G5, W12 G5, G12, T7 G12, T8 95 Notes G5, G16, G17, G19 G19 G5, G16, G17, G19 G19 G16, G17, G19 G16, G17, G19 W12, W14 W12, W14 W12, W14 W12, W14 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 22.0 22.0 22.0 22.0 22.0 22.0 ... ... ... ... ... ... 20.8 19.5 20.8 19.5 20.8 20.8 ... ... ... ... ... ... 19.4 17.5 19.4 17.5 19.4 19.4 18.8 16.1 18.8 16.1 18.8 18.8 18.6 15.1 18.6 15.1 18.6 18.6 18.6 14.3 18.6 14.3 18.6 18.6 18.6 14.0 18.6 14.0 18.6 18.6 18.5 13.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 20.0 20.0 20.0 20.0 ... ... ... ... 18.9 18.9 20.0 20.0 ... ... ... ... 17.7 17.7 18.9 18.9 17.1 17.1 18.3 18.3 16.9 16.9 17.5 17.5 16.6 16.6 16.6 16.6 16.2 16.2 16.2 16.2 15.8 15.8 15.8 15.8 15.5 15.5 15.5 15.5 15.2 15.2 15.2 15.2 ... ... ... ... ... ... ... ... 11 12 13 14 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 20.0 20.0 ... ... ... ... 18.9 18.9 18.9 18.9 18.3 18.3 18.3 18.3 17.5 17.5 17.5 17.5 16.6 16.6 16.6 16.6 16.2 16.2 16.2 16.2 15.8 15.8 15.8 15.8 15.5 15.5 15.5 15.5 15.2 15.2 15.2 15.2 ... ... ... ... ... ... ... ... 15 16 17 18 19 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 18.9 18.9 18.9 18.9 18.9 18.3 18.3 18.3 18.3 18.3 17.5 17.5 17.5 17.5 17.5 16.6 16.6 16.6 16.6 16.6 16.2 16.2 16.2 16.2 16.2 15.8 15.8 15.8 15.8 15.8 15.5 15.5 15.5 15.5 15.5 15.2 15.2 15.2 15.2 15.2 ... ... ... ... ... ... ... ... ... ... 20 21 22 23 24 22.9 22.9 22.9 22.9 22.9 ... ... ... ... ... 22.9 22.9 19.1 22.9 19.1 ... ... ... ... ... 21.7 21.7 16.7 21.7 16.7 20.3 20.3 15.1 20.3 15.1 18.9 18.9 14.0 18.9 14.0 17.9 17.9 13.3 17.9 13.3 17.5 17.5 13.0 17.5 13.0 17.2 17.2 12.8 17.2 12.8 16.9 16.9 12.5 16.9 12.5 16.6 16.6 12.3 16.6 12.3 ... 16.3 12.1 16.3 12.1 ... 16.0 11.8 16.0 11.8 25 26 27 28 29 22.9 22.9 19.4 19.4 19.4 ... ... ... ... ... 22.9 19.1 19.4 16.2 19.4 ... ... ... ... ... 21.7 16.7 18.5 14.2 18.5 20.3 15.1 17.3 12.8 17.3 18.9 14.0 16.0 11.9 16.0 17.9 13.3 15.2 11.3 15.2 17.5 13.0 14.9 11.0 14.9 17.2 12.8 14.6 10.8 14.6 16.9 12.5 14.4 10.6 14.4 16.6 12.3 14.1 10.5 14.1 16.3 12.1 13.8 10.3 13.8 16.0 11.8 13.6 10.0 13.6 30 31 32 33 22.9 22.9 19.4 19.4 ... ... ... ... 22.9 19.1 19.4 16.2 ... ... ... ... 21.7 16.7 18.5 14.2 20.3 15.1 17.3 12.8 18.9 14.0 16.0 11.9 17.9 13.3 15.2 11.3 17.5 13.0 14.9 11.0 17.2 12.8 14.6 10.8 16.9 12.5 14.4 10.6 16.6 12.3 14.1 10.5 16.3 12.1 13.8 10.3 16.0 11.8 13.6 10.0 34 35 36 22.9 22.9 22.9 ... ... ... 22.9 22.9 19.1 ... ... ... 21.7 21.7 16.7 20.3 20.3 15.1 18.9 18.9 14.0 17.9 17.9 13.3 17.5 17.5 13.0 17.2 17.2 12.8 16.9 16.9 12.5 16.6 16.6 12.3 ... 16.3 12.1 ... 16.0 11.8 37 38 39 40 41 42 22.9 22.9 22.9 22.9 19.4 19.4 ... ... ... ... ... ... 22.9 19.1 22.9 22.9 19.4 16.2 ... ... ... ... ... ... 21.7 16.7 21.7 21.7 18.5 14.2 20.3 15.1 20.3 20.3 17.3 12.8 18.9 14.0 18.9 18.9 16.0 11.9 17.9 13.3 17.9 17.9 15.2 11.3 17.5 13.0 17.5 17.5 14.9 11.0 17.2 12.8 17.2 17.2 14.6 10.8 16.9 12.5 16.9 16.9 14.4 10.6 16.6 12.3 16.6 16.6 14.1 10.5 16.3 12.1 16.3 ... 13.8 10.3 16.0 11.8 16.0 ... 13.6 10.0 43 44 45 46 22.9 22.9 22.9 22.9 ... ... ... ... 22.9 22.9 22.9 19.1 ... ... ... ... 21.7 21.7 21.7 16.7 20.3 20.3 20.3 15.1 18.9 18.9 18.9 14.0 17.9 17.9 17.9 13.3 17.5 17.5 17.5 13.0 17.2 17.2 17.2 12.8 16.9 16.9 16.9 12.5 16.6 16.6 16.6 12.3 ... ... 16.3 12.1 ... ... 16.0 11.8 96 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 24 ... 15.6 11.6 15.6 11.6 ... 15.2 11.3 15.2 11.3 ... 12.4 11.0 12.4 11.0 ... 9.8 9.8 9.8 9.8 ... 7.7 7.7 7.7 7.7 ... 6.1 6.1 6.1 6.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 29 15.6 11.6 13.3 9.8 13.3 15.2 11.3 13.0 9.6 13.0 12.4 11.0 10.5 9.4 10.5 9.8 9.8 8.3 8.3 8.3 7.7 7.7 6.6 6.6 6.6 6.1 6.1 5.2 5.2 5.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 33 15.6 11.6 13.3 9.8 15.2 11.3 13.0 9.6 12.4 11.0 10.5 9.4 9.8 9.8 8.3 8.3 7.7 7.7 6.6 6.6 6.1 6.1 5.2 5.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 ... 15.6 11.6 ... 15.2 11.3 ... 12.4 11.0 ... 9.8 9.8 ... 7.7 7.7 ... 6.1 6.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 41 42 15.6 11.6 15.6 ... 13.3 9.8 15.2 11.3 15.2 ... 13.0 9.6 12.4 11.0 12.4 ... 10.5 9.4 9.8 9.8 9.8 ... 8.3 8.3 7.7 7.7 7.7 ... 6.6 6.6 6.1 6.1 6.1 ... 5.2 5.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 43 44 45 46 ... ... 15.6 11.6 ... ... 15.2 11.3 ... ... 12.4 11.0 ... ... 9.8 9.8 ... ... 7.7 7.7 ... ... 6.1 6.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 97 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 18Cr–8Ni–4Si–N 18Cr–9Ni–3Cu–Cb–N 18Cr–9Ni–3Cu–Cb–N Bar Smls. tube Smls. tube SA–479 SA–213 SA–213 ... ... ... S21800 ... S30432 ... S30432 ... ... ... ... 8 8 8 3 1 1 4 5 6 7 8 9 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Forgings Forgings Castings Castings Castings Cast pipe SA–965 SA–965 SA–351 SA–351 SA–351 SA–451 F348H F348H CF8C CF8C CF8C CPF8C S34809 S34809 J92710 J92710 J92710 J92710 ... ... ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 10 11 12 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Forgings Forgings Forgings SA–182 SA–965 SA–965 F347 F347 F347 S34700 ... S34700 ... S34700 ... >5 ... ... 8 8 8 1 1 1 13 14 15 16 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Forgings Forgings Forgings Forgings SA–182 SA–182 SA–965 SA–965 F347H F347H F347H F347H S34709 S34709 S34709 S34709 ... ... ... ... >5 >5 ... ... 8 8 8 8 1 1 1 1 17 18 19 20 21 22 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Forgings Forgings Forgings Forgings Forgings Forgings SA–182 SA–182 SA–965 SA–965 SA–182 SA–182 F348 F348 F348 F348 F348H F348H S34800 S34800 S34800 S34800 S34809 S34809 ... ... ... ... ... ... >5 >5 ... ... >5 >5 8 8 8 8 8 8 1 1 1 1 1 1 23 24 25 26 27 28 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Forgings Forgings Smls. tube Smls. tube Plate Plate SA–182 SA–182 SA–213 SA–213 SA–240 SA–240 F347 F347 TP347 TP347 347 347 S34700 S34700 S34700 S34700 S34700 S34700 ... ... ... ... ... ... ≤5 ≤5 ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 29 30 31 32 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Wld. Wld. Wld. Wld. SA–249 SA–249 SA–249 SA–249 TP347 TP347 TP347 TP347 S34700 S34700 S34700 S34700 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 33 34 35 36 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Smls. & wld. pipe Smls. & wld. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP347 TP347 TP347 TP347 S34700 S34700 S34700 S34700 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 37 38 39 40 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Wld. pipe Smls. pipe Smls. pipe Smls. & wld. fittings SA–358 SA–376 SA–376 SA–403 347 TP347 TP347 347 S34700 S34700 S34700 S34700 1 ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 41 42 43 44 45 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Wld. pipe Bar Bar Wld. pipe Bar SA–409 SA–479 SA–479 SA–813 SA/JIS G4303 TP347 347 347 TP347 SUS347 S34700 S34700 S34700 S34700 ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 Line No. Nominal Composition ð15Þ ð15Þ Product Form tube tube tube tube Spec. No. 98 ... ... ... ... ... ... This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 95 86 86 50 34 34 NP 1500 1500 800 NP NP NP NP NP NP NP NP HA–6 HA–2 HA–2 ... G5, T12 T12 4 5 6 7 8 9 65 65 70 70 70 70 25 25 30 30 30 30 NP NP NP NP NP NP NP NP 800 NP NP 800 1500 1500 NP 1500 1500 NP NP NP NP 650 650 NP HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, H2, G5, G1, G1, G5, 10 11 12 70 70 70 30 30 30 1500 1500 1500 800 800 NP 1500 1500 1500 650 650 650 HA–2 HA–2 HA–2 G5, G12, T7 G5, G12, H1, T7 G12, H1, T7 13 14 15 16 70 70 70 70 30 30 30 30 1500 1500 NP NP NP 800 NP 800 NP 1500 1500 1500 NP NP NP NP HA–2 HA–2 HA–2 HA–2 H2, G5, H2, G5, 17 18 19 20 21 22 70 70 70 70 70 70 30 30 30 30 30 30 1500 1500 NP NP 1500 1500 NP 800 NP NP NP 800 NP 1500 1500 1500 NP 1500 NP 650 650 650 NP NP HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 T7 G5, G12, T7 G5, G12, H1, T7 G12, H1, T7 T9 G5, T8 23 24 25 26 27 28 75 75 75 75 75 75 30 30 30 30 30 30 1500 1500 1500 1500 1500 1500 800 NP 800 NP 800 NP 1500 1500 1500 1500 1500 1500 NP NP NP NP 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, G12, G12, H1, G5, G12, G12, H1, G5, G12, G12, T7 29 30 31 32 75 75 75 75 30 30 30 30 1500 1500 1500 1500 NP 800 NP NP NP NP 1500 1500 NP NP 650 650 HA–2 HA–2 HA–2 HA–2 G12, T7, W13 G5, G12, T6, W12, W13 G3, G5, G12, G24, T6 G3, G12, G24, T7 33 34 35 36 75 75 75 75 30 30 30 30 1500 1500 1500 1500 800 NP NP NP 1500 1500 1500 1500 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T6, W12, W13, W14 G12, T7, W13, W14 G3, G5, G12, G24, T6 G3, G12, G24, T7 37 38 39 40 75 75 75 75 30 30 30 30 NP 1500 1500 NP 800 800 NP 800 NP 1500 1500 1500 NP 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, H1, W12 G5, G12, H1, T6 G12, H1, T7 G5, G12, T6, W12, W14 41 42 43 44 45 75 75 75 75 75 30 30 30 30 30 NP 1500 1500 NP 1500 800 800 NP 800 800 NP 1500 1500 NP 1500 NP 650 650 NP NP HA–2 HA–2 HA–2 HA–2 HA–2 G5, H1, W12 G5, G12, G22, T6 G12, G22, T7 G5, H1, W12 G5, G12, G22, T6 99 Notes H2, T9 T9 G16, G17, G19 G5, G12, G19, T7 G12, G19, T7 G16, G17, G19 T9 H2, T8 T9 H2, T8 H1, T6 T7 H1, T6 T7 T6 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 27.1 22.7 22.7 ... ... ... 25.9 22.7 19.8 ... ... ... 22.1 22.7 18.2 19.8 22.7 17.1 18.4 21.9 16.3 17.6 21.1 15.6 17.3 20.7 15.3 17.1 20.4 15.1 16.9 20.1 14.9 16.8 19.8 14.6 ... 19.5 14.4 ... 19.2 14.2 4 5 6 7 8 9 16.7 16.7 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 16.7 15.3 19.1 19.1 18.4 19.1 ... ... ... ... ... ... 16.3 14.3 17.6 17.6 17.1 17.6 15.4 13.3 16.6 16.6 16.0 16.6 14.9 12.5 16.0 16.0 15.0 16.0 14.6 11.9 15.7 15.8 14.3 15.7 14.6 11.7 15.7 15.7 14.0 15.7 14.6 11.5 15.7 15.7 13.8 15.7 14.6 11.4 15.7 15.7 13.7 15.7 14.6 11.3 15.7 15.7 13.6 15.7 14.5 11.2 ... 15.7 13.5 ... 14.5 11.2 ... 15.6 13.4 ... 10 11 12 20.0 20.0 20.0 ... ... ... 19.1 19.1 18.4 ... ... ... 17.6 17.6 17.1 16.6 16.6 16.0 16.0 16.0 15.0 15.8 15.8 14.3 15.7 15.7 14.0 15.7 15.7 13.8 15.7 15.7 13.7 15.7 15.7 13.6 15.7 15.7 13.5 15.6 15.6 13.4 13 14 15 16 20.0 20.0 20.0 20.0 ... ... ... ... 18.4 19.1 18.4 19.1 ... ... ... ... 17.1 17.6 17.1 17.6 16.0 16.6 16.0 16.6 15.0 16.0 15.0 16.0 14.3 15.7 14.3 15.7 14.0 15.7 14.0 15.7 13.8 15.7 13.8 15.7 13.7 15.7 13.7 15.7 13.6 15.7 13.6 15.7 13.5 15.7 13.5 15.7 13.4 15.6 13.4 15.6 17 18 19 20 21 22 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 18.4 19.1 19.1 18.4 18.4 19.1 ... ... ... ... ... ... 17.1 17.6 17.6 17.1 17.1 17.6 16.0 16.6 16.6 16.0 16.0 16.6 15.0 16.0 16.0 15.0 15.0 16.0 14.3 15.8 15.8 14.3 14.3 15.7 14.0 15.7 15.7 14.0 14.0 15.7 13.8 15.7 15.7 13.8 13.8 15.7 13.7 15.7 15.7 13.7 13.7 15.7 13.6 15.7 15.7 13.6 13.6 15.7 13.5 15.7 15.7 13.5 13.5 15.7 13.4 15.6 15.6 13.4 13.4 15.6 23 24 25 26 27 28 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 18.4 20.0 18.4 20.0 18.4 ... ... ... ... ... ... 18.8 17.1 18.8 17.1 18.8 17.1 17.8 16.0 17.8 16.0 17.8 16.0 17.2 15.0 17.2 15.0 17.2 15.0 16.9 14.3 16.9 14.3 16.9 14.3 16.8 14.0 16.8 14.0 16.8 14.0 16.8 13.8 16.8 13.8 16.8 13.8 16.8 13.7 16.8 13.7 16.8 13.7 16.8 13.6 16.8 13.6 16.8 13.6 16.8 13.5 16.8 13.5 16.8 13.5 16.7 13.4 16.7 13.4 16.7 13.4 29 30 31 32 20.0 20.0 17.0 17.0 ... ... ... ... 18.4 20.0 17.0 15.6 ... ... ... ... 17.1 18.8 16.0 14.6 16.0 17.8 15.1 13.6 15.0 17.2 14.6 12.8 14.3 16.9 14.3 12.2 14.0 16.8 14.3 11.9 13.8 16.8 14.3 11.8 13.7 16.8 14.3 11.6 13.6 16.8 14.3 11.5 13.5 16.8 14.3 11.5 13.4 16.7 14.2 11.4 33 34 35 36 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 18.4 17.0 15.6 ... ... ... ... 18.8 17.1 16.0 14.6 17.8 16.0 15.1 13.6 17.2 15.0 14.6 12.8 16.9 14.3 14.3 12.2 16.8 14.0 14.3 11.9 16.8 13.8 14.3 11.8 16.8 13.7 14.3 11.6 16.8 13.6 14.3 11.5 16.8 13.5 14.3 11.5 16.7 13.4 14.2 11.4 37 38 39 40 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 18.4 20.0 ... ... ... ... 18.8 18.8 17.1 18.8 17.8 17.8 16.0 17.8 17.1 17.2 15.0 17.2 16.9 16.9 14.3 16.9 16.8 16.8 14.0 16.8 16.8 16.8 13.8 16.8 16.8 16.8 13.7 16.8 16.8 16.8 13.6 16.8 ... 16.8 13.5 16.8 ... 16.7 13.4 16.7 41 42 43 44 45 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 20.0 20.0 18.4 20.0 20.0 ... ... ... ... ... 18.8 18.8 17.1 18.8 18.8 17.8 17.8 16.0 17.8 17.8 17.1 17.2 15.0 17.1 17.2 16.9 16.9 14.3 16.9 16.9 16.8 16.8 14.0 16.8 16.8 16.8 16.8 13.8 16.8 16.8 16.8 16.8 13.7 16.8 16.8 16.8 16.8 13.6 16.8 16.8 ... 16.8 13.5 ... 16.8 ... 16.7 13.4 ... 16.7 100 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... 18.9 14.0 ... 18.6 13.8 ... 18.3 13.6 ... 18.1 13.4 ... 14.7 13.2 ... 11.4 11.4 ... 8.7 8.7 ... 6.5 6.5 ... 4.7 4.7 ... 3.3 3.3 ... 2.2 2.2 ... 1.5 1.5 ... ... ... ... ... ... ... ... ... 4 5 6 7 8 9 14.4 11.2 ... 15.5 13.4 ... 14.2 11.2 ... 15.3 13.4 ... 14.0 11.1 ... 12.1 12.1 ... 13.7 11.1 ... 9.1 9.1 ... 10.5 10.5 ... 6.1 6.1 ... 7.9 7.9 ... 4.4 4.4 ... 5.9 5.9 ... 3.3 3.3 ... 4.4 4.4 ... 2.2 2.2 ... 3.2 3.2 ... 1.5 1.5 ... 2.5 2.5 ... 1.2 1.2 ... 1.8 1.8 ... 0.90 0.90 ... 1.3 1.3 ... 0.80 0.80 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 15.5 15.5 13.4 15.3 15.3 13.4 12.1 12.1 12.1 9.1 9.1 9.1 6.1 6.1 6.1 4.4 4.4 4.4 3.3 3.3 3.3 2.2 2.2 2.2 1.5 1.5 1.5 1.2 1.2 1.2 0.90 0.90 0.90 0.80 0.80 0.80 ... ... ... ... ... ... ... ... ... 13 14 15 16 13.4 15.5 13.4 15.5 13.4 15.3 13.4 15.3 13.4 15.1 13.4 15.1 13.3 14.1 13.3 14.1 10.5 10.5 10.5 10.5 7.9 7.9 7.9 7.9 5.9 5.9 5.9 5.9 4.4 4.4 4.4 4.4 3.2 3.2 3.2 3.2 2.5 2.5 2.5 2.5 1.8 1.8 1.8 1.8 1.3 1.3 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 21 22 13.4 15.5 15.5 13.4 13.4 15.5 13.4 15.3 15.3 13.4 13.4 15.3 12.1 12.1 12.1 12.1 13.4 15.1 9.1 9.1 9.1 9.1 13.3 14.1 6.1 6.1 6.1 6.1 10.5 10.5 4.4 4.4 4.4 4.4 7.9 7.9 3.3 3.3 3.3 3.3 5.9 5.9 2.2 2.2 2.2 2.2 4.4 4.4 1.5 1.5 1.5 1.5 3.2 3.2 1.2 1.2 1.2 1.2 2.5 2.5 0.90 0.90 0.90 0.90 1.8 1.8 0.80 0.80 0.80 0.80 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 27 28 16.6 13.4 16.6 13.4 16.6 13.4 16.0 13.4 16.0 13.4 16.0 13.4 12.1 12.1 12.1 12.1 12.1 12.1 9.1 9.1 9.1 9.1 9.1 9.1 6.1 6.1 6.1 6.1 6.1 6.1 4.4 4.4 4.4 4.4 4.4 4.4 3.3 3.3 3.3 3.3 3.3 3.3 2.2 2.2 2.2 2.2 2.2 2.2 1.5 1.5 1.5 1.5 1.5 1.5 1.2 1.2 1.2 1.2 1.2 1.2 0.90 0.90 0.90 0.90 0.90 0.90 0.80 0.80 0.80 0.80 0.80 0.80 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 13.4 16.6 14.1 11.4 13.4 16.0 13.6 11.4 12.1 12.1 10.3 10.3 9.1 9.1 7.8 7.8 6.1 6.1 5.2 5.2 4.4 4.4 3.8 3.8 3.3 3.3 2.8 2.8 2.2 2.2 1.9 1.9 1.5 1.5 1.3 1.3 1.2 1.2 1.0 1.0 0.90 0.90 0.77 0.77 0.80 0.80 0.68 0.68 ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 36 16.6 13.4 14.1 11.4 16.0 13.4 13.6 11.4 12.1 12.1 10.3 10.3 9.1 9.1 7.8 7.8 6.1 6.1 5.2 5.2 4.4 4.4 3.8 3.8 3.3 3.3 2.8 2.8 2.2 2.2 1.9 1.9 1.5 1.5 1.3 1.3 1.2 1.2 1.0 1.0 0.90 0.90 0.77 0.77 0.80 0.80 0.68 0.68 ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 ... 16.6 13.4 16.6 ... 16.0 13.4 16.0 ... 12.1 12.1 12.1 ... 9.1 9.1 9.1 ... 6.1 6.1 6.1 ... 4.4 4.4 4.4 ... 3.3 3.3 3.3 ... 2.2 2.2 2.2 ... 1.5 1.5 1.5 ... 1.2 1.2 1.2 ... 0.90 0.90 0.90 ... 0.80 0.80 0.80 ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 45 ... 16.6 13.4 ... 16.6 ... 16.0 13.4 ... 16.0 ... 12.1 12.1 ... 12.1 ... 9.1 9.1 ... 9.1 ... 6.1 6.1 ... 6.1 ... 4.4 4.4 ... 4.4 ... 3.3 3.3 ... 3.3 ... 2.2 2.2 ... 2.2 ... 1.5 1.5 ... 1.5 ... 1.2 1.2 ... 1.2 ... 0.90 0.90 ... 0.90 ... 0.80 0.80 ... 0.80 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 101 ð15Þ ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 5 6 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Forgings Forgings Smls. tube Smls. tube Plate Plate SA–182 SA–182 SA–213 SA–213 SA–240 SA–240 F347H F347H TP347H TP347H 347H 347H S34709 S34709 S34709 S34709 S34709 S34709 ... ... ... ... ... ... ≤5 ≤5 ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 7 8 9 10 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Wld. Wld. Wld. Wld. SA–249 SA–249 SA–249 SA–249 TP347H TP347H TP347H TP347H S34709 S34709 S34709 S34709 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 11 12 13 14 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Smls. & wld. pipe Smls. & wld. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP347H TP347H TP347H TP347H S34709 S34709 S34709 S34709 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 15 16 17 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Smls. pipe SA–376 Smls. pipe SA–376 Smls. & wld. fittings SA–403 TP347H TP347H 347H S34709 ... S34709 ... S34709 ... ... ... ... 8 8 8 1 1 1 18 19 20 21 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Bar Bar Wld. pipe Wld. pipe SA–479 SA–479 SA–813 SA–814 347H 347H TP347H TP347H S34709 S34709 S34709 S34709 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 22 23 24 25 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Smls. Smls. Smls. Smls. tube tube pipe pipe SA–213 SA–213 SA–312 SA–312 TP347LN TP347LN TP347LN TP347LN S34751 S34751 S34751 S34751 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 26 27 28 29 30 31 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Forgings Forgings Smls. tube Smls. tube Plate Plate SA–182 SA–182 SA–213 SA–213 SA–240 SA–240 F348 F348 TP348 TP348 348 348 S34800 S34800 S34800 S34800 S34800 S34800 ... ... ... ... ... ... ≤5 ≤5 ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 32 33 34 35 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Wld. Wld. Wld. Wld. SA–249 SA–249 SA–249 SA–249 TP348 TP348 TP348 TP348 S34800 S34800 S34800 S34800 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 36 37 38 39 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Smls. & wld. pipe Smls. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP348 TP348 TP348 TP348 S34800 S34800 S34800 S34800 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 40 41 42 43 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Wld. pipe Smls. pipe Smls. pipe Smls. & wld. fittings SA–358 SA–376 SA–376 SA–403 348 TP348 TP348 348 S34800 S34800 S34800 S34800 1 ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 Line No. Nominal Composition Product Form tube tube tube tube tube tube tube tube Spec. No. 102 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 75 75 75 75 75 75 30 30 30 30 30 30 1500 1500 1500 1500 1500 1500 800 NP 800 NP 800 NP 1500 1500 1500 1500 1500 1500 NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, H2, G5, H2, G5, H2, H2, T8 T9 H2, T8 T9 H2, T8 T9 7 8 9 10 75 75 75 75 30 30 30 30 1500 1500 1500 1500 800 NP NP NP NP NP 1500 1500 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, T9, G3, G3, T8, W12, W13 W13 G5, G24, T8 G24, T9 11 12 13 14 75 75 75 75 30 30 30 30 1500 1500 1500 1500 800 NP NP NP 1500 1500 1500 1500 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, H2, G3, G3, H2, T8, W12, W13, W14 T9, W13, W14 G5, G24, H2, T8 G24, H2, T9 15 16 17 75 75 75 30 30 30 1500 1500 NP 800 NP 800 1500 1500 1500 NP NP NP HA–2 HA–2 HA–2 G5, H2, T8 H2, T9 G5, H2, T8, W12, W14 18 19 20 21 75 75 75 75 30 30 30 30 1500 1500 NP NP 800 NP 800 800 NP NP NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, H2, G5, G5, 22 23 24 25 75 75 75 75 30 30 30 30 NP NP NP NP NP NP NP NP 1100 1100 1100 1100 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, T8 ... G5, T8 ... 26 27 28 29 30 31 75 75 75 75 75 75 30 30 30 30 30 30 1500 1500 1500 1500 NP NP 800 NP 800 NP 800 NP 1500 1500 1500 1500 1500 1500 NP NP NP NP 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, G12, T6 G12, T7 G5, G12, T6 G12, T7 G5, G12, T6 G12, T7 32 33 34 35 75 75 75 75 30 30 30 30 1500 1500 1500 1500 NP 800 NP NP NP NP 1500 1500 NP NP 650 650 HA–2 HA–2 HA–2 HA–2 G12, T7, W13 G5, G12, T6, W12, W13 G3, G5, G12, G24, T6 G3, G12, G24, T7 36 37 38 39 75 75 75 75 30 30 30 30 1500 1500 NP NP 800 NP NP NP 1500 1500 1500 1500 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T6, W12, W14 G12, T7 G5, G12, G24, T6 G12, G24, T7 40 41 42 43 75 75 75 75 30 30 30 30 NP 1500 1500 NP 800 800 NP 800 NP 1500 1500 1500 NP 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, W12 G5, G12, H1, T6 G12, H1, T7 G5, G12, H2, T6, W12, W14 103 Notes H2, T8 T9 H2, W12 W12 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 18.4 20.0 18.4 20.0 18.4 ... ... ... ... ... ... 18.8 17.1 18.8 17.1 18.8 17.1 17.8 16.0 17.8 16.0 17.8 16.0 17.1 15.0 17.1 15.0 17.1 15.0 16.9 14.3 16.9 14.3 16.9 14.3 16.8 14.0 16.8 14.0 16.8 14.0 16.8 13.8 16.8 13.8 16.8 13.8 16.8 13.7 16.8 13.7 16.8 13.7 16.8 13.6 16.8 13.6 16.8 13.6 16.8 13.5 16.8 13.5 16.8 13.5 16.7 13.4 16.7 13.4 16.7 13.4 7 8 9 10 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 18.4 17.0 15.6 ... ... ... ... 18.8 17.1 16.0 14.6 17.8 16.0 15.1 13.6 17.1 15.0 14.6 12.8 16.9 14.3 14.3 12.2 16.8 14.0 14.3 11.9 16.8 13.8 14.3 11.8 16.8 13.7 14.3 11.6 16.8 13.6 14.3 11.5 16.8 13.5 14.3 11.5 16.7 13.4 14.2 11.4 11 12 13 14 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 18.4 17.0 15.6 ... ... ... ... 18.8 17.1 16.0 14.6 17.8 16.0 15.1 13.6 17.1 15.0 14.6 12.8 16.9 14.3 14.3 12.2 16.8 14.0 14.3 11.9 16.8 13.8 14.3 11.8 16.8 13.7 14.3 11.6 16.8 13.6 14.3 11.5 16.8 13.5 14.3 11.5 16.7 13.4 14.2 11.4 15 16 17 20.0 20.0 20.0 ... ... ... 20.0 18.4 20.0 ... ... ... 18.8 17.1 18.8 17.8 16.0 17.8 17.1 15.0 17.1 16.9 14.3 16.9 16.8 14.0 16.8 16.8 13.8 16.8 16.8 13.7 16.8 16.8 13.6 16.8 16.8 13.5 16.8 16.7 13.4 16.7 18 19 20 21 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 18.4 20.0 20.0 ... ... ... ... 18.8 17.1 18.8 18.8 17.8 16.0 17.8 17.8 17.1 15.0 17.1 17.1 16.9 14.3 16.9 16.9 16.8 14.0 16.8 16.8 16.8 13.8 16.8 16.8 16.8 13.7 16.8 16.8 16.8 13.6 16.8 16.8 16.8 13.5 ... ... 16.7 13.4 ... ... 22 23 24 25 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 17.7 20.0 17.7 ... ... ... ... 19.1 16.0 19.1 16.0 17.8 14.6 17.8 14.6 16.9 13.6 16.9 13.6 16.5 12.9 16.5 12.9 16.4 12.7 16.4 12.7 16.3 12.6 16.3 12.6 16.3 12.5 16.3 12.5 16.3 12.4 16.3 12.4 16.3 12.4 16.3 12.4 16.2 12.4 16.2 12.4 26 27 28 29 30 31 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 18.4 20.0 18.4 20.0 18.4 ... ... ... ... ... ... 18.8 17.1 18.8 17.1 18.8 17.1 17.8 16.0 17.8 16.0 17.8 16.0 17.2 15.0 17.2 15.0 17.2 15.0 16.9 14.3 16.9 14.3 16.9 14.3 16.8 14.0 16.8 14.0 16.8 14.0 16.8 13.8 16.8 13.8 16.8 13.8 16.8 13.7 16.8 13.7 16.8 13.7 16.8 13.6 16.8 13.6 16.8 13.6 16.8 13.5 16.8 13.5 16.8 13.5 16.7 13.4 16.7 13.4 16.7 13.4 32 33 34 35 20.0 20.0 17.0 17.0 ... ... ... ... 18.4 20.0 17.0 15.6 ... ... ... ... 17.1 18.8 16.0 14.6 16.0 17.8 15.1 13.6 15.0 17.2 14.6 12.8 14.3 16.9 14.3 12.2 14.0 16.8 14.3 11.9 13.8 16.8 14.3 11.8 13.7 16.8 14.3 11.6 13.6 16.8 14.3 11.5 13.5 16.8 14.3 11.5 13.4 16.7 14.2 11.4 36 37 38 39 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 18.4 17.0 15.6 ... ... ... ... 18.8 17.1 16.0 14.6 17.8 16.0 15.1 13.6 17.2 15.0 14.6 12.8 16.9 14.3 14.3 12.2 16.8 14.0 14.3 11.9 16.8 13.8 14.3 11.8 16.8 13.7 14.3 11.6 16.8 13.6 14.3 11.5 16.8 13.5 14.3 11.5 16.7 13.4 14.2 11.4 40 41 42 43 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 18.4 20.0 ... ... ... ... 18.8 18.8 17.1 18.8 17.8 17.8 16.0 17.8 17.1 17.2 15.0 17.2 16.9 16.9 14.3 16.9 16.8 16.8 14.0 16.8 16.8 16.8 13.8 16.8 16.8 16.8 13.7 16.8 16.8 16.8 13.6 16.8 ... 16.8 13.5 16.8 ... 16.7 13.4 16.7 104 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 16.6 13.4 16.6 13.4 16.6 13.4 16.4 13.4 16.4 13.4 16.4 13.4 16.2 13.4 16.2 13.4 16.2 13.4 14.1 13.3 14.1 13.3 14.1 13.3 10.5 10.5 10.5 10.5 10.5 10.5 7.9 7.9 7.9 7.9 7.9 7.9 5.9 5.9 5.9 5.9 5.9 5.9 4.4 4.4 4.4 4.4 4.4 4.4 3.2 3.2 3.2 3.2 3.2 3.2 2.5 2.5 2.5 2.5 2.5 2.5 1.8 1.8 1.8 1.8 1.8 1.8 1.3 1.3 1.3 1.3 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 16.6 13.4 14.1 11.4 16.4 13.4 14.0 11.4 16.2 13.4 13.7 11.4 14.1 13.3 12.0 11.3 10.5 10.5 8.9 8.9 7.9 7.9 6.7 6.7 5.9 5.9 5.0 5.0 4.4 4.4 3.7 3.7 3.2 3.2 2.7 2.7 2.5 2.5 2.1 2.1 1.8 1.8 1.6 1.6 1.3 1.3 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 16.6 13.4 14.1 11.4 16.4 13.4 14.0 11.4 16.2 13.4 13.7 11.4 14.1 13.3 12.0 11.3 10.5 10.5 8.9 8.9 7.9 7.9 6.7 6.7 5.9 5.9 5.0 5.0 4.4 4.4 3.7 3.7 3.2 3.2 2.7 2.7 2.5 2.5 2.1 2.1 1.8 1.8 1.6 1.6 1.3 1.3 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 16.6 13.4 16.6 16.4 13.4 16.4 16.2 13.4 16.2 14.1 13.3 14.1 10.5 10.5 10.5 7.9 7.9 7.9 5.9 5.9 5.9 4.4 4.4 4.4 3.2 3.2 3.2 2.5 2.5 2.5 1.8 1.8 1.8 1.3 1.3 1.3 ... ... ... ... ... ... ... ... ... 18 19 20 21 16.6 13.4 ... ... 16.4 13.4 ... ... 16.2 13.4 ... ... 14.1 13.3 ... ... 10.5 10.5 ... ... 7.9 7.9 ... ... 5.9 5.9 ... ... 4.4 4.4 ... ... 3.2 3.2 ... ... 2.5 2.5 ... ... 1.8 1.8 ... ... 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 16.1 12.4 16.1 12.4 15.8 12.4 15.8 12.4 15.6 12.3 15.6 12.3 13.2 12.2 13.2 12.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 26 27 28 29 30 31 16.6 13.4 16.6 13.4 16.6 13.4 16.0 13.4 16.0 13.4 16.0 13.4 12.1 12.1 12.1 12.1 12.1 12.1 9.1 9.1 9.1 9.1 9.1 9.1 6.1 6.1 6.1 6.1 6.1 6.1 4.4 4.4 4.4 4.4 4.4 4.4 3.3 3.3 3.3 3.3 3.3 3.3 2.2 2.2 2.2 2.2 2.2 2.2 1.5 1.5 1.5 1.5 1.5 1.5 1.2 1.2 1.2 1.2 1.2 1.2 0.90 0.90 0.90 0.90 0.90 0.90 0.80 0.80 0.80 0.80 0.80 0.80 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 13.4 16.6 14.1 11.4 13.4 16.0 13.6 11.4 12.1 12.1 10.3 10.3 9.1 9.1 7.8 7.8 6.1 6.1 5.2 5.2 4.4 4.4 3.8 3.8 3.3 3.3 2.8 2.8 2.2 2.2 1.9 1.9 1.5 1.5 1.3 1.3 1.2 1.2 1.0 1.0 0.90 0.90 0.77 0.77 0.80 0.80 0.68 0.68 ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 16.6 13.4 14.1 11.4 16.0 13.4 13.6 11.4 12.1 12.1 10.3 10.3 9.1 9.1 7.8 7.8 6.1 6.1 5.2 5.2 4.4 4.4 3.8 3.8 3.3 3.3 2.8 2.8 2.2 2.2 1.9 1.9 1.5 1.5 1.3 1.3 1.2 1.2 1.0 1.0 0.90 0.90 0.77 0.77 0.80 0.80 0.68 0.68 ... ... ... ... ... ... ... ... ... ... ... ... 40 41 42 43 ... 16.6 13.4 16.6 ... 16.0 13.4 16.0 ... 12.1 12.1 12.1 ... 9.1 9.1 9.1 ... 6.1 6.1 6.1 ... 4.4 4.4 4.4 ... 3.3 3.3 3.3 ... 2.2 2.2 2.2 ... 1.5 1.5 1.5 ... 1.2 1.2 1.2 ... 0.90 0.90 0.90 ... 0.80 0.80 0.80 ... ... ... ... ... ... ... ... ... ... ... ... 105 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 5 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Wld. pipe Bar Bar Wld. pipe Wld. pipe SA–409 SA–479 SA–479 SA–813 SA–814 TP348 348 348 TP348 TP348 S34800 S34800 S34800 S34800 S34800 ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 6 7 8 9 10 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Forgings Forgings Smls. tube Smls. tube Plate SA–182 SA–182 SA–213 SA–213 SA–240 F348H F348H TP348H TP348H 348H S34809 S34809 S34809 S34809 S34809 ... ... ... ... ... ≤5 ≤5 ... ... ... 8 8 8 8 8 1 1 1 1 1 11 12 13 14 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Wld. Wld. Wld. Wld. SA–249 SA–249 SA–249 SA–249 TP348H TP348H TP348H TP348H S34809 S34809 S34809 S34809 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 15 16 17 18 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Smls. & wld. pipe Smls. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP348H TP348H TP348H TP348H S34809 S34809 S34809 S34809 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 19 20 21 22 23 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb 18Cr–10Ni–Cb Smls. & wld. fittings SA–403 Bar SA–479 Bar SA–479 Wld. pipe SA–813 Wld. pipe SA–814 348H 348H 348H TP348H TP348H S34809 S34809 S34809 S34809 S34809 ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 24 25 18Cr–10Ni–Cb 18Cr–10Ni–Cb Smls. tube Smls. tube SA–213 SA–213 TP347HFG TP347HFG S34710 ... S34710 ... ... ... 8 8 1 1 26 27 28 29 30 31 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Smls. pipe Smls. pipe Wld. pipe Wld. pipe Smls. pipe Smls. pipe SA–312 SA–312 SA–312 SA–312 SA–376 SA–376 TP321 TP321 TP321 TP321 TP321 TP321 S32100 S32100 S32100 S32100 S32100 S32100 ... ... ... ... ... ... >3/8 >3/8 >3/8 >3/8 >3/8 >3/8 8 8 8 8 8 8 1 1 1 1 1 1 32 33 34 35 36 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Smls. pipe Smls. pipe Wld. pipe Wld. pipe Smls. pipe SA–312 SA–312 SA–312 SA–312 SA–376 TP321H TP321H TP321H TP321H TP321H S32109 S32109 S32109 S32109 S32109 ... ... ... ... ... >3/16 >3/16 >3/16 >3/16 >3/8 8 8 8 8 8 1 1 1 1 1 37 38 39 40 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Forgings Forgings Forgings Forgings SA–182 SA–182 SA–965 SA–965 F321 F321 F321 F321 S32100 S32100 S32100 S32100 ... ... ... ... >5 >5 ... ... 8 8 8 8 1 1 1 1 41 42 43 44 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Forgings Forgings Forgings Forgings SA–182 SA–182 SA–965 SA–965 F321H F321H F321H F321H S32109 S32109 S32109 S32109 ... ... ... ... >5 >5 ... ... 8 8 8 8 1 1 1 1 Line No. Nominal Composition Product Form tube tube tube tube Spec. No. 106 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 75 75 75 75 75 30 30 30 30 30 NP 1500 1500 NP NP 800 800 NP 800 800 NP 1500 1500 NP NP NP 650 650 NP NP HA–2 HA–2 HA–2 HA–2 HA–2 G5, W12 G5, G12, G22, H1, T6 G12, G22, H1, T7 G5, H1, W12 G5, W12 6 7 8 9 10 75 75 75 75 75 30 30 30 30 30 1500 1500 1500 1500 NP 800 NP 800 NP 800 1500 1500 1500 1500 NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 HA–2 G5, T9 G5, H2, G5, T8 11 12 13 14 75 75 75 75 30 30 30 30 1500 1500 1500 1500 800 NP NP NP NP NP 1500 1500 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, T9, G3, G3, T8, W12, W13 W13 G5, G24, T8 G24, T9 15 16 17 18 75 75 75 75 30 30 30 30 1500 1500 NP NP 800 NP NP NP 1500 1500 1500 1500 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, H2, T8, W12, W14 H2, T9 G5, G24, H2, T8 G24, H2, T9 19 20 21 22 23 75 75 75 75 75 30 30 30 30 30 NP 1500 1500 NP NP 800 800 NP 800 800 1500 NP NP NP NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 HA–2 G5, G5, H2, G5, G5, 24 25 80 80 30 30 1350 1350 NP NP NP NP NP NP HA–2 HA–2 G5, T9 T9 26 27 28 29 30 31 70 70 70 70 70 70 25 25 25 25 25 25 1500 1500 1500 1500 NP NP 800 NP 800 NP 800 NP 1500 1500 1500 1500 1500 1500 NP NP NP NP 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, G12, G12, T7 G5, G12, G12, T7, G5, G12, G12, H1, 32 33 34 35 36 70 70 70 70 70 25 25 25 25 25 1500 1500 1500 1500 NP 800 NP 800 NP 800 1500 1500 1500 1500 1500 NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 HA–2 G5, T8 G5, T8, G5, 37 38 39 40 70 70 70 70 30 30 30 30 1500 1500 1500 1500 800 NP 800 NP 1500 1500 1500 1500 NP NP 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T6 G12, T7 G5, G12, H1, T6 G12, H1, T7 41 42 43 44 70 70 70 70 30 30 30 30 1500 1500 NP NP 800 NP 800 NP 1500 1500 1500 1500 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, H2, G5, H2, 107 Notes H2, T8 T9 H2 H2, T8, W12, W14 H2, T8 T9 H2, W12 W12 T7 T7, W12, W13, W14 W13, W14 H1, T7 T7 T8 T8, W12, W13, W14 W13, W14 H2, T8 H2, T8 T8 H2, T8 T8 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 20.0 20.0 18.4 20.0 20.0 ... ... ... ... ... 18.8 18.8 17.1 18.8 18.8 17.8 17.8 16.0 17.8 17.8 17.1 17.2 15.0 17.1 17.1 16.9 16.9 14.3 16.9 16.9 16.8 16.8 14.0 16.8 16.8 16.8 16.8 13.8 16.8 16.8 16.8 16.8 13.7 16.8 16.8 16.8 16.8 13.6 16.8 16.8 ... 16.8 13.5 ... ... ... 16.7 13.4 ... ... 6 7 8 9 10 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 20.0 18.4 20.0 18.4 20.0 ... ... ... ... ... 18.8 17.1 18.8 17.1 18.8 17.8 16.0 17.8 16.0 17.8 17.1 15.0 17.1 15.0 17.1 16.9 14.3 16.9 14.3 16.9 16.8 14.0 16.8 14.0 16.8 16.8 13.8 16.8 13.8 16.8 16.8 13.7 16.8 13.7 16.8 16.8 13.6 16.8 13.6 16.8 16.8 13.5 16.8 13.5 ... 16.7 13.4 16.7 13.4 ... 11 12 13 14 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 18.4 17.0 15.6 ... ... ... ... 18.8 17.1 16.0 14.6 17.8 16.0 15.1 13.6 17.1 15.0 14.6 12.8 16.9 14.3 14.3 12.2 16.8 14.0 14.3 11.9 16.8 13.8 14.3 11.8 16.8 13.7 14.3 11.6 16.8 13.6 14.3 11.5 16.8 13.5 14.3 11.5 16.7 13.4 14.2 11.4 15 16 17 18 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 18.4 17.0 15.6 ... ... ... ... 18.8 17.1 16.0 14.6 17.8 16.0 15.1 13.6 17.1 15.0 14.6 12.8 16.9 14.3 14.3 12.2 16.8 14.0 14.3 11.9 16.8 13.8 14.3 11.8 16.8 13.7 14.3 11.6 16.8 13.6 14.3 11.5 16.8 13.5 14.3 11.5 16.7 13.4 14.2 11.4 19 20 21 22 23 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 20.0 20.0 18.4 20.0 20.0 ... ... ... ... ... 18.8 18.8 17.1 18.8 18.8 17.8 17.8 16.0 17.8 17.8 17.1 17.1 15.0 17.1 17.1 16.9 16.9 14.3 16.9 16.9 16.8 16.8 14.0 16.8 16.8 16.8 16.8 13.8 16.8 16.8 16.8 16.8 13.7 16.8 16.8 16.8 16.8 13.6 16.8 16.8 16.8 16.8 13.5 ... ... 16.7 16.7 13.4 ... ... 24 25 20.0 20.0 ... ... 20.0 18.1 ... ... 20.0 16.9 19.9 15.9 19.3 15.2 19.1 14.6 19.0 14.4 18.9 14.1 18.8 13.9 18.6 13.8 18.3 13.6 18.1 13.4 26 27 28 29 30 31 16.7 16.7 16.7 16.7 16.7 16.7 16.7 15.6 16.7 15.6 ... ... 16.7 15.0 16.7 15.0 16.7 15.0 16.7 14.4 16.7 14.4 ... ... 16.7 13.8 16.7 13.8 16.7 13.8 16.7 12.8 16.7 12.8 16.7 12.8 16.1 11.9 16.1 11.9 16.1 11.9 15.2 11.3 15.2 11.3 15.2 11.3 14.9 11.0 14.9 11.0 14.9 11.0 14.6 10.8 14.6 10.8 14.6 10.8 14.3 10.6 14.3 10.6 14.3 10.6 14.1 10.5 14.1 10.5 14.1 10.5 13.9 10.3 13.9 10.3 13.9 10.3 13.8 10.2 13.8 10.2 13.8 10.2 32 33 34 35 36 16.7 16.7 16.7 16.7 16.7 16.7 15.6 16.7 15.6 ... 16.7 15.0 16.7 15.0 16.7 16.7 14.4 16.7 14.4 ... 16.7 13.8 16.7 13.8 16.7 16.7 12.8 16.7 12.8 16.7 16.1 11.9 16.1 11.9 16.1 15.2 11.3 15.2 11.3 15.2 14.9 11.0 14.9 11.0 14.9 14.6 10.8 14.6 10.8 14.6 14.3 10.6 14.3 10.6 14.3 14.1 10.5 14.1 10.5 14.1 13.9 10.3 13.9 10.3 13.9 13.8 10.2 13.8 10.2 13.8 37 38 39 40 20.0 20.0 20.0 20.0 ... ... ... ... 19.0 18.0 19.0 18.0 ... ... ... ... 17.8 16.5 17.8 16.5 17.5 15.3 17.5 15.3 17.5 14.3 17.5 14.3 17.5 13.5 17.5 13.5 17.5 13.2 17.5 13.2 17.5 13.0 17.5 13.0 17.2 12.7 17.2 12.7 16.9 12.6 16.9 12.6 16.7 12.4 16.7 12.4 16.5 12.3 16.5 12.3 41 42 43 44 20.0 20.0 20.0 20.0 ... ... ... ... 19.0 18.0 19.0 18.0 ... ... ... ... 17.8 16.5 17.8 16.5 17.5 15.3 17.5 15.3 17.5 14.3 17.5 14.3 17.5 13.5 17.5 13.5 17.5 13.2 17.5 13.2 17.5 13.0 17.5 13.0 17.2 12.7 17.2 12.7 16.9 12.6 16.9 12.6 16.7 12.4 16.7 12.4 16.5 12.3 16.5 12.3 108 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... 16.6 13.4 ... ... ... 16.0 13.4 ... ... ... 12.1 12.1 ... ... ... 9.1 9.1 ... ... ... 6.1 6.1 ... ... ... 4.4 4.4 ... ... ... 3.3 3.3 ... ... ... 2.2 2.2 ... ... ... 1.5 1.5 ... ... ... 1.2 1.2 ... ... ... 0.90 0.90 ... ... ... 0.80 0.80 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 10 16.6 13.4 16.6 13.4 ... 16.4 13.4 16.4 13.4 ... 16.2 13.4 16.2 13.4 ... 14.1 13.3 14.1 13.3 ... 10.5 10.5 10.5 10.5 ... 7.9 7.9 7.9 7.9 ... 5.9 5.9 5.9 5.9 ... 4.4 4.4 4.4 4.4 ... 3.2 3.2 3.2 3.2 ... 2.5 2.5 2.5 2.5 ... 1.8 1.8 1.8 1.8 ... 1.3 1.3 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 16.6 13.4 14.1 11.4 16.4 13.4 14.0 11.4 16.2 13.4 13.7 11.4 14.1 13.3 12.0 11.3 10.5 10.5 8.9 8.9 7.9 7.9 6.7 6.7 5.9 5.9 5.0 5.0 4.4 4.4 3.7 3.7 3.2 3.2 2.7 2.7 2.5 2.5 2.1 2.1 1.8 1.8 1.6 1.6 1.3 1.3 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 16.6 13.4 14.1 11.4 16.4 13.4 14.0 11.4 16.2 13.4 13.7 11.4 14.1 13.3 12.0 11.3 10.5 10.5 8.9 8.9 7.9 7.9 6.7 6.7 5.9 5.9 5.0 5.0 4.4 4.4 3.7 3.7 3.2 3.2 2.7 2.7 2.5 2.5 2.1 2.1 1.8 1.8 1.6 1.6 1.3 1.3 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 23 16.6 16.6 13.4 ... ... 16.4 16.4 13.4 ... ... 16.2 16.2 13.4 ... ... 14.1 14.1 13.3 ... ... 10.5 10.5 10.5 ... ... 7.9 7.9 7.9 ... ... 5.9 5.9 5.9 ... ... 4.4 4.4 4.4 ... ... 3.2 3.2 3.2 ... ... 2.5 2.5 2.5 ... ... 1.8 1.8 1.8 ... ... 1.3 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 17.9 13.3 17.7 13.1 17.5 13.0 16.6 12.8 12.8 12.8 9.7 9.7 7.3 7.3 5.4 5.4 4.0 4.0 ... ... ... ... ... ... ... ... ... ... ... ... 26 27 28 29 30 31 13.6 10.1 13.6 10.1 13.6 10.1 13.5 10.0 13.5 10.0 13.5 10.0 9.6 9.6 9.6 9.6 9.6 9.6 6.9 6.9 6.9 6.9 6.9 6.9 5.0 5.0 5.0 5.0 5.0 5.0 3.6 3.6 3.6 3.6 3.6 3.6 2.6 2.6 2.6 2.6 2.6 2.6 1.7 1.7 1.7 1.7 1.7 1.7 1.1 1.1 1.1 1.1 1.1 1.1 0.80 0.80 0.80 0.80 0.80 0.80 0.50 0.50 0.50 0.50 0.50 0.50 0.30 0.30 0.30 0.30 0.30 0.30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 36 13.6 10.1 13.6 10.1 13.6 13.5 10.0 13.5 10.0 13.5 12.3 9.9 12.3 9.9 12.3 9.1 9.1 9.1 9.1 9.1 6.9 6.9 6.9 6.9 6.9 5.4 5.4 5.4 5.4 5.4 4.1 4.1 4.1 4.1 4.1 3.2 3.2 3.2 3.2 3.2 2.5 2.5 2.5 2.5 2.5 1.9 1.9 1.9 1.9 1.9 1.5 1.5 1.5 1.5 1.5 1.1 1.1 1.1 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 16.4 12.1 16.4 12.1 14.9 12.0 14.9 12.0 9.6 9.6 9.6 9.6 6.9 6.9 6.9 6.9 5.0 5.0 5.0 5.0 3.6 3.6 3.6 3.6 2.6 2.6 2.6 2.6 1.7 1.7 1.7 1.7 1.1 1.1 1.1 1.1 0.80 0.80 0.80 0.80 0.50 0.50 0.50 0.50 0.30 0.30 0.30 0.30 ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 16.4 12.1 16.4 12.1 16.2 12.0 16.2 12.0 12.3 11.9 12.3 11.9 9.1 9.1 9.1 9.1 6.9 6.9 6.9 6.9 5.4 5.4 5.4 5.4 4.1 4.1 4.1 4.1 3.2 3.2 3.2 3.2 2.5 2.5 2.5 2.5 1.9 1.9 1.9 1.9 1.5 1.5 1.5 1.5 1.1 1.1 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... 109 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Forgings Forgings Forgings SA–182 SA–182 SA–182 F321 F321 F321 S32100 ... S32100 ... S32100 ... ≤5 ≤5 ≤5 8 8 8 1 1 1 4 5 6 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Smls. tube Smls. tube Smls. tube SA–213 SA–213 SA–213 TP321 TP321 TP321 S32100 ... S32100 ... S32100 ... ... ... ... 8 8 8 1 1 1 7 8 9 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Plate Plate Plate SA–240 SA–240 SA–240 321 321 321 S32100 ... S32100 ... S32100 ... ... ... ... 8 8 8 1 1 1 10 11 12 13 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Wld. Wld. Wld. Wld. tube tube tube tube SA–249 SA–249 SA–249 SA–249 TP321 TP321 TP321 TP321 S32100 S32100 S32100 S32100 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 14 15 16 17 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Smls. pipe Smls. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP321 TP321 TP321 TP321 S32100 S32100 S32100 S32100 ... ... ... ... ≤3/8 ≤3/8 ≤3/8 ≤3/8 8 8 8 8 1 1 1 1 18 19 20 21 22 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Wld. pipe Smls. pipe Smls. pipe Smls. pipe Smls. & wld. fittings SA–358 SA–376 SA–376 SA–376 SA–403 321 TP321 TP321 TP321 321 S32100 S32100 S32100 S32100 S32100 1 ... ... ... ... ... ≤3/8 ≤3/8 ≤3/8 ... 8 8 8 8 8 1 1 1 1 1 23 24 25 26 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Wld. pipe Bar Bar Bar SA–409 SA–479 SA–479 SA–479 TP321 321 321 321 S32100 S32100 S32100 S32100 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 27 28 29 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Wld. pipe Wld. pipe Bar SA–813 SA–814 SA/JIS G4303 TP321 TP321 SUS321 S32100 ... S32100 ... ... ... ... ... ... 8 8 8 1 1 1 30 31 32 33 34 35 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Forgings Forgings Smls. tube Smls. tube Plate Plate SA–182 SA–182 SA–213 SA–213 SA–240 SA–240 F321H F321H TP321H TP321H 321H 321H S32109 S32109 S32109 S32109 S32109 S32109 ... ... ... ... ... ... ≤5 ≤5 ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 36 37 38 39 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Wld. Wld. Wld. Wld. tube tube tube tube SA–249 SA–249 SA–249 SA–249 TP321H TP321H TP321H TP321H S32109 S32109 S32109 S32109 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 40 41 42 43 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Smls. pipe Smls. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP321H TP321H TP321H TP321H S32109 S32109 S32109 S32109 ... ... ... ... ≤3/16 ≤3/16 ≤3/16 ≤3/16 8 8 8 8 1 1 1 1 Line No. Nominal Composition Product Form Spec. No. 110 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 75 75 75 30 30 30 1500 1500 NP NP NP 800 NP 1500 1500 NP 650 650 HA–2 HA–2 HA–2 G5, G12, T7 G12, T7 G5, G12, T6 4 5 6 75 75 75 30 30 30 1500 1500 NP NP NP 800 NP 1500 1500 NP NP NP HA–2 HA–2 HA–2 G5, G12, T7 G12, T7 G5, G12, T6 7 8 9 75 75 75 30 30 30 1500 1500 NP NP NP 800 NP 1500 1500 NP 650 650 HA–2 HA–2 HA–2 G5, G12, T7 G12, T7 G5, G12, T6 10 11 12 13 75 75 75 75 30 30 30 30 1500 1500 1500 1500 NP 800 NP NP NP NP 1500 1500 NP NP 650 650 HA–2 HA–2 HA–2 HA–2 G12, T7, W13 G5, G12, T7, W12, W13 G3, G5, G12, G24, T7 G3, G12, G24, T7 14 15 16 17 75 75 75 75 30 30 30 30 1500 1500 1500 1500 800 NP 800 NP 1500 1500 1500 1500 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T7 G12, T7 G5, G12, T7, W12, W13, W14 T7, W13, W14 18 19 20 21 22 75 75 75 75 75 30 30 30 30 30 NP 1500 1500 NP NP 800 NP NP 800 800 NP NP 1500 1500 1500 NP NP NP NP 650 HA–2 HA–2 HA–2 HA–2 HA–2 G5, H1, W12 G5, G12, H1, T7 G12, H1, T7 G5, G12, T6 G5, G12, T6, W12, W14 23 24 25 26 75 75 75 75 30 30 30 30 NP 1500 1500 NP 800 NP NP 800 NP NP 1500 1500 NP NP 650 650 HA–2 HA–2 HA–2 HA–2 G5, W12 G5, G12, H1, T7 G12, G22, H1, T7 G5, G12, G22, H1, T6 27 28 29 75 75 75 30 30 30 NP NP NP 800 800 800 NP NP 1500 NP NP NP HA–2 HA–2 HA–2 G5, H1, W12 G5, W12 G5, G12, G22, H1, T6 30 31 32 33 34 35 75 75 75 75 75 75 30 30 30 30 30 30 1500 1500 1500 1500 1500 1500 800 NP 800 NP 800 NP 1500 1500 1500 1500 1500 1500 NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, H2, G5, H2, G5, H2, H2, T8 T8 H2, T8 T8 H2, T8 T8 36 37 38 39 75 75 75 75 30 30 30 30 1500 1500 1500 1500 NP 800 NP NP NP NP 1500 1500 NP NP NP NP HA–2 HA–2 HA–2 HA–2 T8, G5, G3, G3, W13 T8, W12, W13 G5, G24, T8 G24, T8 40 41 42 43 75 75 75 75 30 30 30 30 1500 1500 1500 1500 800 NP 800 NP 1500 1500 1500 1500 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, T8 T8 G5, T8, W12, W13, W14 T8, W13, W14 111 Notes This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 20.0 20.0 20.0 ... ... ... 20.0 18.0 20.0 ... ... ... 19.1 16.5 19.1 18.7 15.3 18.7 18.7 14.3 18.7 18.3 13.5 18.3 17.9 13.2 17.9 17.5 13.0 17.5 17.2 12.7 17.2 16.9 12.6 16.9 16.7 12.4 16.7 16.5 12.3 16.5 4 5 6 20.0 20.0 20.0 ... ... ... 20.0 18.0 20.0 ... ... ... 19.1 16.5 19.1 18.7 15.3 18.7 18.7 14.3 18.7 18.3 13.5 18.3 17.9 13.2 17.9 17.5 13.0 17.5 17.2 12.7 17.2 16.9 12.6 16.9 16.7 12.4 16.7 16.5 12.3 16.5 7 8 9 20.0 20.0 20.0 ... ... ... 20.0 18.0 20.0 ... ... ... 19.1 16.5 19.1 18.7 15.3 18.7 18.7 14.3 18.7 18.3 13.5 18.3 17.9 13.2 17.9 17.5 13.0 17.5 17.2 12.7 17.2 16.9 12.6 16.9 16.7 12.4 16.7 16.5 12.3 16.5 10 11 12 13 20.0 20.0 17.0 17.0 ... ... ... ... 18.0 20.0 17.0 15.3 ... ... ... ... 16.5 19.1 16.2 14.1 15.3 18.7 15.9 13.0 14.3 18.7 15.9 12.2 13.5 18.3 15.5 11.5 13.2 17.9 15.2 11.2 13.0 17.5 14.9 11.0 12.7 17.2 14.6 10.8 12.6 16.9 14.4 10.7 12.4 16.7 14.2 10.5 12.3 16.5 14.1 10.4 14 15 16 17 20.0 20.0 20.0 20.0 20.0 18.7 20.0 18.7 20.0 18.0 20.0 18.0 19.6 17.2 19.6 17.2 19.1 16.5 19.1 16.5 18.7 15.3 18.7 15.3 18.7 14.3 18.7 14.3 18.3 13.5 18.3 13.5 17.9 13.2 17.9 13.2 17.5 13.0 17.5 13.0 17.2 12.7 17.2 12.7 16.9 12.6 16.9 12.6 16.7 12.4 16.7 12.4 16.5 12.3 16.5 12.3 18 19 20 21 22 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 20.0 20.0 18.0 20.0 20.0 ... ... ... ... ... 19.1 19.1 16.5 19.1 19.1 18.7 18.7 15.3 18.7 18.7 18.7 18.7 14.3 18.7 18.7 18.3 18.3 13.5 18.3 18.3 17.9 17.9 13.2 17.9 17.9 17.5 17.5 13.0 17.5 17.5 17.2 17.2 12.7 17.2 17.2 16.9 16.9 12.6 16.9 16.9 ... 16.7 12.4 16.7 16.7 ... 16.5 12.3 16.5 16.5 23 24 25 26 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 18.0 20.0 ... ... ... ... 19.1 19.1 16.5 19.1 18.7 18.7 15.3 18.7 18.7 18.7 14.3 18.7 18.3 18.3 13.5 18.3 17.9 17.9 13.2 17.9 17.5 17.5 13.0 17.5 17.2 17.2 12.7 17.2 16.9 16.9 12.6 16.9 ... 16.7 12.4 16.7 ... 16.5 12.3 16.5 27 28 29 20.0 20.0 20.0 ... ... ... 20.0 20.0 20.0 ... ... ... 19.1 19.1 19.1 18.7 18.7 18.7 18.7 18.7 18.7 18.3 18.3 18.3 17.9 17.9 17.9 17.5 17.5 17.5 17.2 17.2 17.2 16.9 16.9 16.9 ... ... 16.7 ... ... 16.5 30 31 32 33 34 35 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 18.0 20.0 18.0 20.0 18.0 ... ... ... ... ... ... 19.1 16.5 19.1 16.5 19.1 16.5 18.7 15.3 18.7 15.3 18.7 15.3 18.7 14.3 18.7 14.3 18.7 14.3 18.3 13.5 18.3 13.5 18.3 13.5 17.9 13.2 17.9 13.2 17.9 13.2 17.5 13.0 17.5 13.0 17.5 13.0 17.2 12.7 17.2 12.7 17.2 12.7 16.9 12.6 16.9 12.6 16.9 12.6 16.7 12.4 16.7 12.4 16.7 12.4 16.5 12.3 16.5 12.3 16.5 12.3 36 37 38 39 20.0 20.0 17.0 17.0 ... ... ... ... 18.0 20.0 17.0 15.3 ... ... ... ... 16.5 19.1 16.2 14.1 15.3 18.7 15.9 13.0 14.3 18.7 15.9 12.2 13.5 18.3 15.5 11.5 13.2 17.9 15.2 11.2 13.0 17.5 14.9 11.0 12.7 17.2 14.6 10.8 12.6 16.9 14.4 10.7 12.4 16.7 14.2 10.5 12.3 16.5 14.1 10.4 40 41 42 43 20.0 20.0 20.0 20.0 20.0 18.7 20.0 18.7 20.0 18.0 20.0 18.0 19.6 17.2 19.6 17.2 19.1 16.5 19.1 16.5 18.7 15.3 18.7 15.3 18.7 14.3 18.7 14.3 18.3 13.5 18.3 13.5 17.9 13.2 17.9 13.2 17.5 13.0 17.5 13.0 17.2 12.7 17.2 12.7 16.9 12.6 16.9 12.6 16.7 12.4 16.7 12.4 16.5 12.3 16.5 12.3 112 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 16.4 12.1 16.4 16.2 12.0 14.9 9.6 9.6 9.6 6.9 6.9 6.9 5.0 5.0 5.0 3.6 3.6 3.6 2.6 2.6 2.6 1.7 1.7 1.7 1.1 1.1 1.1 0.80 0.80 0.80 0.50 0.50 0.50 0.30 0.30 0.30 ... ... ... ... ... ... ... ... ... 4 5 6 16.4 12.1 16.4 16.2 12.0 14.9 9.6 9.6 9.6 6.9 6.9 6.9 5.0 5.0 5.0 3.6 3.6 3.6 2.6 2.6 2.6 1.7 1.7 1.7 1.1 1.1 1.1 0.80 0.80 0.80 0.50 0.50 0.50 0.30 0.30 0.30 ... ... ... ... ... ... ... ... ... 7 8 9 16.4 12.1 16.4 16.2 12.0 14.9 9.6 9.6 9.6 6.9 6.9 6.9 5.0 5.0 5.0 3.6 3.6 3.6 2.6 2.6 2.6 1.7 1.7 1.7 1.1 1.1 1.1 0.80 0.80 0.80 0.50 0.50 0.50 0.30 0.30 0.30 ... ... ... ... ... ... ... ... ... 10 11 12 13 12.1 16.4 13.9 10.3 12.0 16.2 13.8 10.2 9.6 9.6 8.2 8.2 6.9 6.9 5.9 5.9 5.0 5.0 4.3 4.3 3.6 3.6 3.1 3.1 2.6 2.6 2.2 2.2 1.7 1.7 1.4 1.4 1.1 1.1 0.9 0.9 0.80 0.80 0.68 0.68 0.50 0.50 0.43 0.43 0.30 0.30 0.26 0.26 ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 17 16.4 12.1 16.4 12.1 16.2 12.0 16.2 12.0 9.6 9.6 9.6 9.6 6.9 6.9 6.9 6.9 5.0 5.0 5.0 5.0 3.6 3.6 3.6 3.6 2.6 2.6 2.6 2.6 1.7 1.7 1.7 1.7 1.1 1.1 1.1 1.1 0.80 0.80 0.80 0.80 0.50 0.50 0.50 0.50 0.30 0.30 0.30 0.30 ... ... ... ... ... ... ... ... ... ... ... ... 18 19 20 21 22 ... 16.4 12.1 16.4 16.4 ... 16.2 12.0 14.9 14.9 ... 9.6 9.6 9.6 9.6 ... 6.9 6.9 6.9 6.9 ... 5.0 5.0 5.0 5.0 ... 3.6 3.6 3.6 3.6 ... 2.6 2.6 2.6 2.6 ... 1.7 1.7 1.7 1.7 ... 1.1 1.1 1.1 1.1 ... 0.80 0.80 0.80 0.80 ... 0.50 0.50 0.50 0.50 ... 0.30 0.30 0.30 0.30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 ... 16.4 12.1 16.4 ... 16.2 12.0 14.9 ... 9.6 9.6 9.6 ... 6.9 6.9 6.9 ... 5.0 5.0 5.0 ... 3.6 3.6 3.6 ... 2.6 2.6 2.6 ... 1.7 1.7 1.7 ... 1.1 1.1 1.1 ... 0.80 0.80 0.80 ... 0.50 0.50 0.50 ... 0.30 0.30 0.30 ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 ... ... 16.4 ... ... 14.9 ... ... 9.6 ... ... 6.9 ... ... 5.0 ... ... 3.6 ... ... 2.6 ... ... 1.7 ... ... 1.1 ... ... 0.80 ... ... 0.50 ... ... 0.30 ... ... ... ... ... ... ... ... ... 30 31 32 33 34 35 16.4 12.1 16.4 12.1 16.4 12.1 16.2 12.0 16.2 12.0 16.2 12.0 12.3 11.9 12.3 11.9 12.3 11.9 9.1 9.1 9.1 9.1 9.1 9.1 6.9 6.9 6.9 6.9 6.9 6.9 5.4 5.4 5.4 5.4 5.4 5.4 4.1 4.1 4.1 4.1 4.1 4.1 3.2 3.2 3.2 3.2 3.2 3.2 2.5 2.5 2.5 2.5 2.5 2.5 1.9 1.9 1.9 1.9 1.9 1.9 1.5 1.5 1.5 1.5 1.5 1.5 1.1 1.1 1.1 1.1 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 12.1 16.4 13.9 10.3 12.0 16.2 13.8 10.2 11.9 12.3 10.5 10.1 9.1 9.1 7.7 7.7 6.9 6.9 5.9 5.9 5.4 5.4 4.6 4.6 4.1 4.1 3.5 3.5 3.2 3.2 2.7 2.7 2.5 2.5 2.1 2.1 1.9 1.9 1.6 1.6 1.5 1.5 1.3 1.3 1.1 1.1 0.94 0.94 ... ... ... ... ... ... ... ... ... ... ... ... 40 41 42 43 16.4 12.1 16.4 12.1 16.2 12.0 16.2 12.0 12.3 11.9 12.3 11.9 9.1 9.1 9.1 9.1 6.9 6.9 6.9 6.9 5.4 5.4 5.4 5.4 4.1 4.1 4.1 4.1 3.2 3.2 3.2 3.2 2.5 2.5 2.5 2.5 1.9 1.9 1.9 1.9 1.5 1.5 1.5 1.5 1.1 1.1 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... 113 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti Smls. pipe SA–376 Smls. pipe SA–376 Smls. & wld. fittings SA–403 TP321H TP321H 321H S32109 ... S32109 ... S32109 ... ≤3/8 ≤3/8 ... 8 8 8 1 1 1 4 5 6 7 8 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–10Ni–Ti 18Cr–11Ni Bar Bar Wld. pipe Wld. pipe Plate SA–479 SA–479 SA–813 SA–814 SA–240 321H 321H TP321H TP321H 305 S32109 S32109 S32109 S32109 S30500 ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 9 10 11 12 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo Forgings Forgings Forgings Forgings SA–182 SA–182 SA–182 SA–182 F317L F317L F317L F317L S31703 S31703 S31703 S31703 ... ... ... ... >5 >5 ≤5 ≤5 8 8 8 8 1 1 1 1 13 14 15 16 17 18 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo Forgings Forgings Plate Plate Plate Plate SA–182 SA–182 SA–240 SA–240 SA–240 SA–240 F317 F317 317 317 317L 317L S31700 S31700 S31700 S31700 S31703 S31703 ... ... ... ... ... ... ≤5 ≤5 ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 19 20 21 22 23 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo Wld. Wld. Wld. Wld. Wld. SA–249 SA–249 SA–249 SA–249 SA–249 TP317 TP317 TP317 TP317L TP317L S31700 S31700 S31700 S31703 S31703 ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 24 25 26 27 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo Smls. & wld. pipe Smls. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP317 TP317 TP317 TP317 S31700 S31700 S31700 S31700 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 28 29 30 31 32 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo Smls. pipe Smls. pipe Wld. pipe Wld. pipe Smls. & wld. fittings SA–312 SA–312 SA–312 SA–312 SA–403 TP317L TP317L TP317L TP317L 317 S31703 S31703 S31703 S31703 S31700 ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 1 1 1 1 1 33 34 35 36 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo Fittings Fittings Fittings Fittings SA–403 SA–403 SA–403 SA–403 317L 317L 317L 317L S31703 S31703 S31703 S31703 CR CR WP–S WP–S ... ... ... ... 8 8 8 8 1 1 1 1 37 38 39 40 41 42 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo 18Cr–13Ni–3Mo Fittings Fittings Fittings Fittings Fittings Fittings SA–403 SA–403 SA–403 SA–403 SA–403 SA–403 317L 317L 317L 317L 317L 317L S31703 S31703 S31703 S31703 S31703 S31703 WP–W WP–W WP–WU WP–WU WP–WX WP–WX ... ... ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 43 44 45 46 18Cr–15Ni–4Si 18Cr–15Ni–4Si 18Cr–15Ni–4Si 18Cr–15Ni–4Si Forgings Forgings Plate Plate SA–182 SA–182 SA–240 SA–240 ... ... ... ... S30600 S30600 S30600 S30600 Sol. Sol. Sol. Sol. ... ... ≤2 ≤2 8 8 8 8 1 1 1 1 Line No. Nominal Composition Product Form tube tube tube tube tube Spec. No. 114 ann. ann. ann. ann. This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 75 75 75 30 30 30 1500 1500 NP 800 NP 800 1500 1500 1500 NP NP NP HA–2 HA–2 HA–2 G5, H2, T8 H2, T8 G5, H2, T8, W12, W14 4 5 6 7 8 75 75 75 75 75 30 30 30 30 30 1500 1500 NP NP NP NP 800 800 800 800 1500 1500 NP NP NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 HA–1 H2, G5, G5, G5, G5 9 10 11 12 65 65 70 70 25 25 25 25 NP NP NP NP NP NP NP NP 850 850 850 850 650 650 650 650 HA–4 HA–4 HA–4 HA–4 G5 ... G5 ... 13 14 15 16 17 18 75 75 75 75 75 75 30 30 30 30 30 30 NP NP NP NP NP NP NP NP NP NP NP NP 1500 1500 1500 1500 850 850 650 650 650 650 650 650 HA–2 HA–2 HA–2 HA–2 HA–4 HA–4 G5, G12, T8 G12, T9 G5, G12, T8 G12, T9 G5 ... 19 20 21 22 23 75 75 75 75 75 30 30 30 30 30 NP NP NP NP NP 800 NP NP NP NP NP 1500 1500 850 850 NP 650 650 650 650 HA–2 HA–2 HA–2 HA–4 HA–4 G5, W12 G5, G12, G24, T8 G12, G24, T9 G5, G24 G24 24 25 26 27 75 75 75 75 30 30 30 30 NP NP NP NP 800 NP NP NP 1500 1500 1500 1500 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T8, W12, W14 G12, T9 G5, G12, G24, T8 G12, G24, T9 28 29 30 31 32 75 75 75 75 75 30 30 30 30 30 NP NP NP NP NP NP NP NP NP NP 850 850 850 850 1500 650 650 650 650 650 HA–4 HA–4 HA–4 HA–4 HA–2 G5 ... G5, G24 G24 G5, G12, T8, W14 33 34 35 36 75 75 75 75 30 30 30 30 NP NP NP NP NP NP NP NP 850 850 850 850 650 650 650 650 HA–4 HA–4 HA–4 HA–4 G5, G24 G24 G5 ... 37 38 39 40 41 42 75 75 75 75 75 75 30 30 30 30 30 30 NP NP NP NP NP NP NP NP NP NP NP NP 850 850 850 850 850 850 650 650 650 650 650 650 HA–4 HA–4 HA–4 HA–4 HA–4 HA–4 G5, G24 G24 G5, G24 G24 G5, G24 G24 43 44 45 46 78 78 78 78 35 35 35 35 NP NP NP NP NP NP NP NP 300 300 300 300 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, H6 H6 G5, H6 H6 115 Notes T8 H2, T8 H2, W12 W12 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 20.0 20.0 20.0 ... ... ... 20.0 18.0 20.0 ... ... ... 19.1 16.5 19.1 18.7 15.3 18.7 18.7 14.3 18.7 18.3 13.5 18.3 17.9 13.2 17.9 17.5 13.0 17.5 17.2 12.7 17.2 16.9 12.6 16.9 16.7 12.4 16.7 16.5 12.3 16.5 4 5 6 7 8 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 18.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 16.5 19.1 19.1 19.1 18.9 15.3 18.7 18.7 18.7 18.3 14.3 18.7 18.7 18.7 17.5 13.5 18.3 18.3 18.3 16.6 13.2 17.9 17.9 17.9 16.2 13.0 17.5 17.5 17.5 15.8 12.7 17.2 17.2 17.2 15.5 12.6 16.9 16.9 16.9 15.2 12.4 16.7 ... ... ... 12.3 16.5 ... ... ... 9 10 11 12 16.7 16.7 16.7 16.7 ... ... ... ... 16.7 14.2 16.7 14.2 ... ... ... ... 16.7 12.7 16.7 12.7 15.7 11.7 15.7 11.7 14.8 10.9 14.8 10.9 14.0 10.4 14.0 10.4 13.7 10.2 13.7 10.2 13.5 10.0 13.5 10.0 13.2 9.8 13.2 9.8 12.9 9.6 12.9 9.6 12.7 9.4 12.7 9.4 ... ... ... ... 13 14 15 16 17 18 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 17.3 20.0 17.3 20.0 17.0 ... ... ... ... ... ... 20.0 15.6 20.0 15.6 19.6 15.2 19.3 14.3 19.3 14.3 18.9 14.0 18.0 13.3 18.0 13.3 17.7 13.1 17.0 12.6 17.0 12.6 16.9 12.5 16.6 12.3 16.6 12.3 16.5 12.2 16.3 12.1 16.3 12.1 16.2 12.0 16.1 11.9 16.1 11.9 15.8 11.7 15.9 11.8 15.9 11.8 15.5 11.5 15.7 11.6 15.7 11.6 15.2 11.3 15.6 11.5 15.6 11.5 ... ... 19 20 21 22 23 20.0 17.0 17.0 17.0 17.0 ... ... ... ... ... 20.0 17.0 14.7 17.0 14.5 ... ... ... ... ... 20.0 17.0 13.2 16.7 12.9 19.3 16.4 12.1 16.0 11.9 18.0 15.3 11.3 15.1 11.2 17.0 14.5 10.7 14.3 10.6 16.6 14.1 10.5 14.0 10.4 16.3 13.9 10.3 13.7 10.2 16.1 13.7 10.1 13.5 10.0 15.9 13.5 10.0 13.2 9.8 ... 13.4 9.9 12.9 9.6 ... 13.2 9.8 ... ... 24 25 26 27 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 17.3 17.0 14.7 ... ... ... ... 20.0 15.6 17.0 13.2 19.3 14.3 16.4 12.1 18.0 13.3 15.3 11.3 17.0 12.6 14.5 10.7 16.6 12.3 14.1 10.5 16.3 12.1 13.9 10.3 16.1 11.9 13.7 10.1 15.9 11.8 13.5 10.0 15.7 11.6 13.4 9.9 15.6 11.5 13.2 9.8 28 29 30 31 32 20.0 20.0 17.0 17.0 20.0 20.0 18.2 17.0 15.5 ... 20.0 17.0 17.0 14.5 20.0 20.0 16.0 17.0 13.6 ... 19.6 15.2 16.7 12.9 20.0 18.9 14.0 16.0 11.9 19.3 17.7 13.1 15.1 11.2 18.0 16.9 12.5 14.3 10.6 17.0 16.5 12.2 14.0 10.4 16.6 16.2 12.0 13.7 10.2 16.3 15.8 11.7 13.5 10.0 16.1 15.5 11.5 13.2 9.8 15.9 15.2 11.3 12.9 9.6 15.7 ... ... ... ... 15.6 33 34 35 36 17.0 17.0 20.0 20.0 ... ... ... ... 17.0 14.5 20.0 17.0 ... ... ... ... 16.7 12.9 19.6 15.2 16.0 11.9 18.9 14.0 15.1 11.2 17.7 13.1 14.3 10.6 16.9 12.5 14.0 10.4 16.5 12.2 13.7 10.2 16.2 12.0 13.5 10.0 15.8 11.7 13.2 9.8 15.5 11.5 12.9 9.6 15.2 11.3 ... ... ... ... 37 38 39 40 41 42 17.0 17.0 17.0 17.0 17.0 17.0 ... ... ... ... ... ... 17.0 14.5 17.0 14.5 17.0 14.5 ... ... ... ... ... ... 16.7 12.9 16.7 12.9 16.7 12.9 16.0 11.9 16.0 11.9 16.0 11.9 15.1 11.2 15.1 11.2 15.1 11.2 14.3 10.6 14.3 10.6 14.3 10.6 14.0 10.4 14.0 10.4 14.0 10.4 13.7 10.2 13.7 10.2 13.7 10.2 13.5 10.0 13.5 10.0 13.5 10.0 13.2 9.8 13.2 9.8 13.2 9.8 12.9 9.6 12.9 9.6 12.9 9.6 ... ... ... ... ... ... 43 44 45 46 22.3 22.3 22.3 22.3 ... ... ... ... 21.3 17.9 21.3 17.9 ... ... ... ... 19.6 16.1 19.6 16.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 116 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 16.4 12.1 16.4 16.2 12.0 16.2 12.3 11.9 12.3 9.1 9.1 9.1 6.9 6.9 6.9 5.4 5.4 5.4 4.1 4.1 4.1 3.2 3.2 3.2 2.5 2.5 2.5 1.9 1.9 1.9 1.5 1.5 1.5 1.1 1.1 1.1 ... ... ... ... ... ... ... ... ... 4 5 6 7 8 12.1 16.4 ... ... ... 12.0 16.2 ... ... ... 11.9 12.3 ... ... ... 9.1 9.1 ... ... ... 6.9 6.9 ... ... ... 5.4 5.4 ... ... ... 4.1 4.1 ... ... ... 3.2 3.2 ... ... ... 2.5 2.5 ... ... ... 1.9 1.9 ... ... ... 1.5 1.5 ... ... ... 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16 17 18 15.4 11.4 15.4 11.4 ... ... 15.3 11.3 15.3 11.3 ... ... 15.1 11.2 15.1 11.2 ... ... 12.4 11.1 12.4 11.1 ... ... 9.8 9.8 9.8 9.8 ... ... 7.4 7.4 7.4 7.4 ... ... 5.5 5.5 5.5 5.5 ... ... 4.1 4.1 4.1 4.1 ... ... 3.1 3.1 3.1 3.1 ... ... 2.3 2.3 2.3 2.3 ... ... 1.7 1.7 1.7 1.7 ... ... 1.3 1.3 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 23 ... 13.1 9.7 ... ... ... 13.0 9.6 ... ... ... 12.9 9.5 ... ... ... 10.5 9.4 ... ... ... 8.3 8.3 ... ... ... 6.3 6.3 ... ... ... 4.7 4.7 ... ... ... 3.5 3.5 ... ... ... 2.6 2.6 ... ... ... 1.9 1.9 ... ... ... 1.5 1.5 ... ... ... 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 15.4 11.4 13.1 9.7 15.3 11.3 13.0 9.6 15.1 11.2 12.9 9.5 12.4 11.1 10.5 9.4 9.8 9.8 8.3 8.3 7.4 7.4 6.3 6.3 5.5 5.5 4.7 4.7 4.1 4.1 3.5 3.5 3.1 3.1 2.6 2.6 2.3 2.3 1.9 1.9 1.7 1.7 1.5 1.5 1.3 1.3 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 31 32 ... ... ... ... 15.4 ... ... ... ... 15.3 ... ... ... ... 15.1 ... ... ... ... 12.4 ... ... ... ... 9.8 ... ... ... ... 7.4 ... ... ... ... 5.5 ... ... ... ... 4.1 ... ... ... ... 3.1 ... ... ... ... 2.3 ... ... ... ... 1.7 ... ... ... ... 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 36 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 41 42 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 43 44 45 46 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 117 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 5 6 18Cr–15Ni–4Si 18Cr–15Ni–4Si 18Cr–15Ni–4Si 18Cr–15Ni–4Si 18Cr–15Ni–4Si 18Cr–15Ni–4Si Smls. & wld. pipe Smls. & wld. pipe Wld. pipe Wld. pipe Bar Bar SA–312 SA–312 SA–312 SA–312 SA–479 SA–479 ... ... ... ... ... ... S30600 S30600 S30600 S30600 S30600 S30600 Sol. Sol. Sol. Sol. Sol. Sol. 7 8 9 10 18Cr–18Ni–2Si 18Cr–18Ni–2Si 18Cr–18Ni–2Si 18Cr–18Ni–2Si Smls. tube Smls. tube Plate Plate SA–213 SA–213 SA–240 SA–240 XM–15 XM–15 XM–15 XM–15 S38100 S38100 S38100 S38100 11 12 13 14 18Cr–18Ni–2Si 18Cr–18Ni–2Si 18Cr–18Ni–2Si 18Cr–18Ni–2Si Wld. Wld. Wld. Wld. tube tube pipe pipe SA–249 SA–249 SA–312 SA–312 TPXM–15 TPXM–15 TPXM–15 TPXM–15 15 16 17 18 18Cr–20Ni–5.5Si 18Cr–20Ni–5.5Si 18Cr–20Ni–5.5Si 18Cr–20Ni–5.5Si Smls. tube Smls. tube Plate Plate SA–213 SA–213 SA–240 SA–240 19 20 21 22 23 24 18Cr–20Ni–5.5Si 18Cr–20Ni–5.5Si 18Cr–20Ni–5.5Si 18Cr–20Ni–5.5Si 18Cr–20Ni–5.5Si 18Cr–20Ni–5.5Si Smls. & wld. pipe Smls. & wld. pipe Wld. pipe Wld. pipe Bar Bar 25 26 27 28 29 30 19Cr–9Ni–1/2Mo 19Cr–9Ni–1/2Mo 19Cr–9Ni–2Mo 19Cr–9Ni–2Mo 19Cr–10Ni–3Mo 19Cr–10Ni–3Mo 31 32 33 34 35 36 Line No. Nominal Composition Product Form Spec. No. ... ... ... ... ≤4 ≤4 8 8 8 8 8 8 1 1 1 1 1 1 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 S38100 S38100 S38100 S38100 ... ... ... ... ... ... ... ... 8 8 8 8 1 1 1 1 ... ... ... ... S32615 S32615 S32615 S32615 Sol. Sol. Sol. Sol. ann. ann. ann. ann. ... ... ... ... 8 8 8 8 1 1 1 1 SA–312 SA–312 SA–312 SA–312 SA–479 SA–479 ... ... ... ... ... ... S32615 S32615 S32615 S32615 S32615 S32615 Sol. Sol. Sol. Sol. Sol. Sol. ann. ann. ann. ann. ann. ann. ... ... ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 Castings Castings Castings Castings Castings Castings SA–351 SA–351 SA–351 SA–351 SA–351 SA–351 CF10 CF10 CF10M CF10M CG8M CG8M J92590 J92590 ... ... J93000 J93000 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 1 1 1 1 1 1 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo Smls. tube Smls. tube Plate Plate Wld. tube Wld. tube SA–213 SA–213 SA–240 SA–240 SA–249 SA–249 ... ... ... ... ... ... S31725 S31725 S31725 S31725 S31725 S31725 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 4 4 4 4 4 4 37 38 39 40 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo Smls. pipe Smls. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 ... ... ... ... S31725 S31725 S31725 S31725 ... ... ... ... ... ... ... ... 8 8 8 8 4 4 4 4 41 42 43 44 45 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo Wld. pipe Wld. pipe Smls. pipe Smls. pipe Fittings SA–358 SA–358 SA–376 SA–376 SA–403 ... ... ... ... ... S31725 S31725 S31725 S31725 S31725 ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 4 4 4 4 4 118 ann. ann. ann. ann. ann. ann. This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 78 78 78 78 78 78 35 35 35 35 35 35 NP NP NP NP NP NP NP NP NP NP NP NP 300 300 300 300 300 300 NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, H6 H6 G5, G24, H6 G24, H6 G5, H6 H6 7 8 9 10 75 75 75 75 30 30 30 30 NP NP NP NP NP NP NP NP 1000 1000 1000 1000 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5 ... G5 ... 11 12 13 14 75 75 75 75 30 30 30 30 NP NP NP NP NP NP NP NP 1000 1000 950 1000 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G24 G24 G5, G24 G24 15 16 17 18 80 80 80 80 32 32 32 32 NP NP NP NP NP NP NP NP 400 400 400 400 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, H6 H6 G5, H6 H6 19 20 21 22 23 24 80 80 80 80 80 80 32 32 32 32 32 32 NP NP NP NP NP NP NP NP NP NP NP NP 400 400 400 400 400 400 NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, H6 H6 G5, G24, H6 G24, H6 G5, H6 H6 25 26 27 28 29 30 70 70 70 70 75 75 30 30 30 30 35 35 NP NP NP NP NP NP NP NP NP NP NP NP 1500 1500 1500 1500 1000 1000 650 650 NP NP 650 650 HA–1 HA–1 HA–2 HA–2 HA–2 HA–2 G1, G1, G1, G1, G1, G1, 31 32 33 34 35 36 75 75 75 75 75 75 30 30 30 30 30 30 NP NP NP NP NP NP NP NP NP NP NP NP 400 400 400 400 400 400 400 400 400 400 400 400 HA–4 HA–4 HA–4 HA–4 HA–4 HA–4 G5 ... G5 ... G5, G24 G24 37 38 39 40 75 75 75 75 30 30 30 30 NP NP NP NP NP NP NP NP 400 400 400 400 NP NP NP NP HA–4 HA–4 HA–4 HA–4 G5 ... G5, G24 G24 41 42 43 44 45 75 75 75 75 75 30 30 30 30 30 NP NP NP NP NP NP NP NP NP NP 400 400 400 400 400 400 400 400 400 400 HA–4 HA–4 HA–4 HA–4 HA–4 G5, G24 G24 G5 ... G5, W14 119 Notes G5, G19, T6 G19, T7 G5, G19, T6 G19, T8 G5, G19 G19 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 22.3 22.3 19.0 19.0 22.3 22.3 ... ... ... ... ... ... 21.3 17.9 18.1 15.2 21.3 17.9 ... ... ... ... ... ... 19.6 16.1 16.7 13.7 19.6 16.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 16.7 20.0 16.7 ... ... ... ... 18.9 15.0 18.9 15.0 18.3 13.8 18.3 13.8 17.5 12.9 17.5 12.9 16.6 12.3 16.6 12.3 16.2 12.0 16.2 12.0 15.8 11.7 15.8 11.7 15.5 11.5 15.5 11.5 15.2 11.2 15.2 11.2 14.9 11.0 14.9 11.0 14.6 10.8 14.6 10.8 11 12 13 14 17.0 17.0 17.0 17.0 ... ... ... ... 17.0 14.2 17.0 14.2 ... ... ... ... 16.1 12.7 16.1 12.7 15.5 11.7 15.5 11.7 14.8 11.0 14.8 11.0 14.1 10.4 14.1 10.4 13.8 10.2 13.8 10.2 13.5 10.0 13.5 10.0 13.2 9.8 13.2 9.8 12.9 9.6 12.9 9.6 12.6 9.4 12.6 9.4 12.4 9.2 12.4 9.2 15 16 17 18 21.3 21.3 21.3 21.3 ... ... ... ... 21.3 17.6 21.3 17.6 ... ... ... ... 21.3 16.5 21.3 16.5 21.0 15.4 21.0 15.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 23 24 21.3 21.3 18.1 18.1 21.3 21.3 ... ... ... ... ... ... 21.3 17.6 18.1 15.0 21.3 17.6 ... ... ... ... ... ... 21.3 16.5 18.1 14.0 21.3 16.5 21.0 15.4 17.9 13.1 21.0 15.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 29 30 20.0 20.0 20.0 20.0 21.4 21.4 ... ... ... ... ... ... 19.0 16.7 20.0 17.5 20.8 18.8 ... ... ... ... ... ... 17.7 15.0 19.5 15.7 19.6 16.4 17.2 13.8 19.3 14.3 19.1 14.7 17.0 12.9 17.9 13.3 18.4 13.6 16.5 12.2 17.0 12.6 17.5 12.9 16.2 12.0 16.6 12.3 17.1 12.7 15.8 11.7 16.3 12.1 16.8 12.5 15.5 11.5 16.1 11.9 16.6 12.3 15.2 11.3 15.9 11.8 16.4 12.1 14.9 11.1 15.7 11.6 16.2 12.0 14.6 10.8 15.5 11.5 16.0 11.8 31 32 33 34 35 36 20.0 20.0 20.0 20.0 17.0 17.0 ... ... ... ... ... ... 20.0 16.9 20.0 16.9 17.0 14.4 ... ... ... ... ... ... 19.6 15.2 19.6 15.2 16.6 12.9 18.9 14.0 18.9 14.0 16.1 11.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 16.9 17.0 14.4 ... ... ... ... 19.6 15.2 16.6 12.9 18.9 14.0 16.1 11.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 45 17.0 17.0 20.0 20.0 20.0 ... ... ... ... ... 17.0 14.4 20.0 16.9 20.0 ... ... ... ... ... 16.6 12.9 19.6 15.2 19.6 16.1 11.9 18.9 14.0 18.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 120 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 14.3 10.6 14.3 10.6 14.0 10.4 14.0 10.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 12.1 9.0 12.1 9.0 11.9 8.8 ... 8.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 23 24 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 29 30 14.4 10.6 15.3 11.4 15.7 11.6 12.2 10.4 14.9 11.3 12.2 11.3 9.5 9.5 11.5 11.2 ... ... 7.5 7.5 8.9 8.9 ... ... 6.0 6.0 6.9 6.9 ... ... 4.8 4.8 5.4 5.4 ... ... 3.9 3.9 4.3 4.3 ... ... 3.3 3.3 3.4 3.4 ... ... 2.7 2.7 2.8 2.8 ... ... 2.3 2.3 2.3 2.3 ... ... 2.0 2.0 1.9 1.9 ... ... 1.7 1.7 1.6 1.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 35 36 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 45 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 121 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo 19Cr–15Ni–4Mo Wld. pipe Wld. pipe Bar Bar SA–409 SA–409 SA–479 SA–479 ... ... ... ... S31725 S31725 S31725 S31725 ... ... ... ... ... ... ... ... 8 8 8 8 4 4 4 4 5 6 7 8 9 20Cr–10Ni 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo Bar Castings Castings Forgings Forgings SA–479 SA–351 SA–351 SA–182 SA–182 ER308 CK3MCuN CK3MCuN F44 F44 S30880 J93254 J93254 S31254 S31254 ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 ... 4 4 4 4 10 11 12 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo Wld. pipe Wld. pipe Fittings SA–358 SA–358 SA–403 ... ... ... S31254 ... S31254 ... S31254 ... ... ... ... 8 8 8 4 4 4 ð15Þ ð15Þ 13 14 15 16 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo Plate Plate Wld. tube Wld. tube SA–240 SA–240 SA–249 SA–249 ... ... ... ... S31254 S31254 S31254 S31254 ... ... ... ... >3/16 >3/16 t > 0.187 t > 0.187 8 8 8 8 4 4 4 4 ð15Þ ð15Þ ð15Þ ð15Þ 17 18 19 20 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo Smls. pipe Smls. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 ... ... ... ... S31254 S31254 S31254 S31254 ... ... ... ... t t t t > > > > 0.187 0.187 0.187 0.187 8 8 8 8 4 4 4 4 ð15Þ ð15Þ ð15Þ ð15Þ 21 22 23 24 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo Wld. tube Wld. tube Smls. pipe Smls. pipe SA–249 SA–249 SA–312 SA–312 ... ... ... ... S31254 S31254 S31254 S31254 ... ... ... ... t t t t ≤ ≤ ≤ ≤ 0.187 0.187 0.187 0.187 8 8 8 8 4 4 4 4 ð15Þ ð15Þ 25 26 27 28 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo 20Cr–18Ni–6Mo Wld. pipe Wld. pipe Plate Plate SA–312 SA–312 SA–240 SA–240 ... ... ... ... S31254 S31254 S31254 S31254 ... ... ... ... t ≤ 0.187 t ≤ 0.187 ≤3/16 ≤3/16 8 8 8 8 4 4 4 4 ð15Þ ð15Þ ð15Þ 29 30 31 21Cr–5Mn–1.5Ni–Cu–N 21Cr–5Mn–1.5Ni–Cu–N 21Cr–5Mn–1.5Ni–Cu–N Plate Bar Sheet, strip SA–240 SA–479 SA–240 ... ... ... S32101 ... S32101 ... S32101 ... >3/16 ... ≤3/16 10H 10H 10H 1 1 1 32 33 34 35 36 21Cr–6Ni–9Mn 21Cr–6Ni–9Mn 21Cr–6Ni–9Mn 21Cr–6Ni–9Mn 21Cr–6Ni–9Mn Forgings Smls. pipe Smls. pipe Wld. pipe Wld. pipe SA–182 SA–312 SA–312 SA–312 SA–312 FXM–11 TPXM–11 TPXM–11 TPXM–11 TPXM–11 S21904 S21904 S21904 S21904 S21904 ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 3 3 3 3 3 37 38 39 40 21Cr–6Ni–9Mn 21Cr–6Ni–9Mn 21Cr–6Ni–9Mn 21Cr–6Ni–9Mn Plate Plate Forgings Forgings SA–666 SA–666 SA–965 SA–965 XM–11 XM–11 FXM–11 FXM–11 S21904 S21904 S21904 S21904 ... ... ... ... ... ... ... ... 8 8 8 8 3 3 3 3 41 42 43 44 21Cr–11Ni–N 21Cr–11Ni–N 21Cr–11Ni–N 21Cr–11Ni–N Forgings Forgings Smls. tube Smls. tube SA–182 SA–182 SA–213 SA–213 F45 F45 ... ... S30815 S30815 S30815 S30815 ... ... ... ... ... ... ... ... 8 8 8 8 2 2 2 2 Line No. Nominal Composition Product Form Spec. No. 122 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 75 75 75 75 30 30 30 30 NP NP NP NP NP NP NP NP 400 400 400 400 400 400 400 400 HA–4 HA–4 HA–4 HA–4 G5, G24 G24 G5 ... 5 6 7 8 9 75 80 80 94 94 30 38 38 44 44 NP NP NP NP NP 800 750 NP 750 NP NP 750 750 750 750 NP 650 650 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 G5 G1, G5 G1 G5 ... 10 11 12 94 94 94 44 44 44 NP NP NP 750 NP 750 750 750 NP 650 650 NP HA–2 HA–2 HA–2 G5, G24 G24 G5, W12 13 14 15 16 95 95 95 95 45 45 45 45 NP NP NP NP 750 NP 750 NP 750 750 750 750 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5 ... G5, G24 G24 17 18 19 20 95 95 95 95 45 45 45 45 NP NP NP NP 750 NP 750 NP 750 750 750 750 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5 ... G5, G24 G24 21 22 23 24 98 98 98 98 45 45 45 45 NP NP NP NP 750 NP 750 NP 750 750 750 750 650 650 NP NP HA–2 HA–2 HA–2 HA–2 G5, G24 G24 G5 ... 25 26 27 28 98 98 100 100 45 45 45 45 NP NP NP NP 750 NP 750 NP 750 750 750 750 NP NP 650 650 HA–2 HA–2 HA–2 HA–2 G5, G24 G24 G5 ... 29 30 31 94 94 101 65 65 77 NP NP NP NP NP NP 600 600 600 NP NP NP HA–5 HA–5 HA–5 G19 G19 G19 32 33 34 35 36 90 90 90 90 90 50 50 50 50 50 NP NP NP NP NP NP NP NP NP NP 600 600 600 600 600 600 600 600 600 600 HA–6 HA–6 HA–6 HA–6 HA–6 ... G5 ... G5, G24 G24 37 38 39 40 90 90 90 90 50 50 50 50 NP NP NP NP NP NP NP NP 600 600 600 600 600 600 600 600 HA–6 HA–6 HA–6 HA–6 G5 ... G5 ... 41 42 43 44 87 87 87 87 45 45 45 45 1650 1650 1650 1650 NP NP NP NP 1650 1650 1650 1650 650 650 650 650 HA–6 HA–6 HA–6 HA–6 G5, G6, G5, G6, 123 Notes G6, T5 T6 G6, T5 T6 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 17.0 17.0 20.0 20.0 ... ... ... ... 17.0 14.4 20.0 16.9 ... ... ... ... 16.6 12.9 19.6 15.2 16.1 11.9 18.9 14.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 9 20.0 22.9 22.9 26.9 26.9 ... ... ... ... ... 20.0 22.9 20.7 26.9 23.9 ... ... ... ... ... 18.9 21.7 18.5 25.5 21.4 18.3 20.7 17.1 24.3 19.8 17.5 20.0 16.1 23.5 18.6 16.6 19.6 15.4 23.0 17.9 16.2 19.4 15.2 22.8 17.6 15.8 19.3 15.1 22.7 17.4 15.5 19.2 15.0 22.6 17.3 15.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 22.8 22.8 26.9 ... ... ... 22.8 20.3 26.9 ... ... ... 21.7 18.2 25.5 20.7 16.8 24.3 20.0 15.8 23.5 19.5 15.2 23.0 19.4 15.0 22.8 19.3 14.8 22.7 19.2 14.7 22.6 ... ... ... ... ... ... ... ... ... 13 14 15 16 27.1 27.1 23.1 23.1 ... ... ... ... 27.1 24.5 23.1 20.8 ... ... ... ... 25.8 21.9 21.9 18.6 24.6 20.2 20.9 17.2 23.7 19.1 20.2 16.2 23.2 18.3 19.7 15.5 23.1 18.0 19.6 15.3 23.0 17.8 19.5 15.2 22.9 17.7 19.4 15.1 ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 27.1 27.1 23.1 23.1 ... ... ... ... 27.1 24.5 23.1 20.8 ... ... ... ... 25.8 21.9 21.9 18.6 24.6 20.3 20.9 17.2 23.7 19.1 20.2 16.2 23.2 18.3 19.7 15.5 23.1 18.0 19.6 15.3 23.0 17.9 19.5 15.2 22.9 17.7 19.4 15.1 ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 24 23.8 23.8 28.0 28.0 ... ... ... ... 23.8 20.8 28.0 24.5 ... ... ... ... 22.6 18.6 26.6 21.9 21.6 17.2 25.4 20.3 20.8 16.2 24.5 19.1 20.4 15.5 23.9 18.3 20.2 15.3 23.8 18.0 20.1 15.2 23.7 17.9 20.1 15.1 23.6 17.7 ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 23.8 23.8 28.6 28.6 ... ... ... ... 23.8 20.8 28.6 24.5 ... ... ... ... 22.6 18.6 27.2 21.9 21.6 17.2 25.9 20.2 20.8 16.2 25.0 19.1 20.4 15.5 24.4 18.3 20.2 15.3 24.3 18.0 20.1 15.2 24.1 17.8 20.1 15.1 23.9 17.7 ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 26.9 26.9 28.9 ... ... ... 26.9 26.9 28.9 ... ... ... 25.6 25.6 27.5 24.7 24.7 26.5 24.7 24.7 26.5 24.7 24.7 26.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 36 25.7 25.7 25.7 21.9 21.9 ... ... ... ... ... 25.7 25.7 25.7 21.9 21.9 ... ... ... ... ... 22.0 24.0 22.0 20.4 18.7 19.6 22.8 19.6 19.4 16.6 18.1 22.0 18.1 18.7 15.3 17.1 21.5 17.1 18.3 14.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 25.7 25.7 25.7 25.7 ... ... ... ... 25.7 25.7 25.7 25.7 ... ... ... ... 24.0 22.0 24.0 22.0 22.8 19.6 22.8 19.6 22.0 18.1 22.0 18.1 21.5 17.1 21.5 17.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 24.9 24.9 24.9 24.9 ... ... ... ... 24.7 24.7 24.7 24.7 ... ... ... ... 23.3 22.0 23.3 22.0 22.4 19.9 22.4 19.9 21.8 18.5 21.8 18.5 21.4 17.7 21.4 17.7 21.2 17.4 21.2 17.4 21.0 17.2 21.0 17.2 20.8 17.0 20.8 17.0 20.6 16.8 20.6 16.8 20.3 16.6 20.3 16.6 20.0 16.4 20.0 16.4 124 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ 17 18 19 20 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ 21 22 23 24 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ 25 26 27 28 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ 29 30 31 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ 32 33 34 35 36 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 19.1 16.2 19.1 16.2 14.9 14.9 14.9 14.9 11.6 11.6 11.6 11.6 9.0 9.0 9.0 9.0 6.9 6.9 6.9 6.9 5.2 5.2 5.2 5.2 4.0 4.0 4.0 4.0 3.1 3.1 3.1 3.1 2.4 2.4 2.4 2.4 1.9 1.9 1.9 1.9 1.6 1.6 1.6 1.6 1.3 1.3 1.3 1.3 1.0 1.0 1.0 1.0 0.86 0.86 0.86 0.86 0.71 0.71 0.71 0.71 125 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 21Cr–11Ni–N 21Cr–11Ni–N 21Cr–11Ni–N 21Cr–11Ni–N Plate Plate Wld. tube Wld. tube SA–240 SA–240 SA–249 SA–249 ... ... ... ... S30815 S30815 S30815 S30815 ... ... ... ... ... ... ... ... 8 8 8 8 2 2 2 2 5 6 7 8 9 10 21Cr–11Ni–N 21Cr–11Ni–N 21Cr–11Ni–N 21Cr–11Ni–N 21Cr–11Ni–N 21Cr–11Ni–N Smls. pipe Smls. pipe Wld. pipe Wld. pipe Bar Bar SA–312 SA–312 SA–312 SA–312 SA–479 SA–479 ... ... ... ... ... ... S30815 S30815 S30815 S30815 S30815 S30815 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 2 2 2 2 2 2 11 12 13 14 15 22Cr–2Ni–Mo–N 22Cr–2Ni–Mo–N 22Cr–2Ni–Mo–N 22Cr–2Ni–Mo–N 22Cr–2Ni–Mo–N Forgings Plate Bar Smls. tube Wld. tube SA–182 SA–240 SA–479 SA–789 SA–789 F66 ... ... ... ... S32202 S32202 S32202 S32202 S32202 ... ... ... ... ... ... ... ... ... ... 10H 10H 10H 10H 10H 1 1 1 1 1 16 17 18 19 22Cr–2Ni–Mo–N 22Cr–2Ni–Mo–N 22Cr–2Ni–Mo–N 22Cr–2Ni–Mo–N Smls. pipe Wld. pipe Smls. fittings Wld. fittings SA–790 SA–790 SA–815 SA–815 ... ... ... ... S32202 S32202 S32202 S32202 ... ... ... ... ... ... ... ... 10H 10H 10H 10H 1 1 1 1 20 21 22 23 24 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N Forgings Plate Bar Smls. tube Wld. tube SA–182 SA–240 SA–479 SA–789 SA–789 F51 ... ... ... ... S31803 S31803 S31803 S31803 S31803 ... ... ... ... ... ... ... ... ... ... 10H 10H 10H 10H 10H 1 1 1 1 1 25 26 27 28 29 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N Smls. pipe Wld. pipe Smls. fittings Wld. fittings Smls. & wld. fittings SA–790 SA–790 SA–815 SA–815 SA–815 ... ... ... ... ... S31803 S31803 S31803 S31803 S31803 ... ... ... ... ... ... ... ... ... ... 10H 10H 10H 10H 10H 1 1 1 1 1 30 31 32 33 34 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N Plate Bar Smls. & wld. pipe Smls. pipe Wld. pipe SA–240 SA–479 SA–790 SA–790 SA–790 ... ... ... ... ... S32205 S32205 S32205 S32205 S32205 ... ... ... ... ... ... ... ... ... ... 10H 10H 10H 10H 10H 1 1 1 1 1 35 36 37 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N Smls. & wld. fittings SA–815 Smls. fittings SA–815 Wld. fittings SA–815 ... ... ... S32205 ... S32205 ... S32205 ... ... ... ... 10H 10H 10H 1 1 1 38 39 40 41 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N 22Cr–5Ni–3Mo–N Forgings Smls. & wld. tube Smls. tube Wld. tube F60 ... ... ... S32205 S32205 S32205 S32205 ... ... ... ... 10H 10H 10H 10H 1 1 1 1 Line No. Nominal Composition Product Form Spec. No. SA–182 SA–789 SA–789 SA–789 126 ... ... ... ... This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 87 87 87 87 45 45 45 45 1650 1650 1650 1650 NP NP NP NP 1650 1650 1650 1650 650 650 650 650 HA–6 HA–6 HA–6 HA–6 G5, G6, G5, G6, G6, T5 T6 G6, G24, T5 G24, T6 5 6 7 8 9 10 87 87 87 87 87 87 45 45 45 45 45 45 1650 1650 1650 1650 1650 1650 NP NP NP NP NP NP 1650 1650 1650 1650 1650 1650 650 650 650 650 650 650 HA–6 HA–6 HA–6 HA–6 HA–6 HA–6 G5, G6, G5, G6, G5, G6, G6, T5 T6 G6, G24, T5 G24, T6 G6, T5 T6 11 12 13 14 15 94 94 94 94 94 65 65 65 65 65 NP NP NP NP NP NP NP NP NP NP 600 600 600 600 600 NP NP NP NP NP HA–5 HA–5 HA–5 HA–5 HA–5 G19 G19 G19 G19 G19, G24 16 17 18 19 94 94 94 94 65 65 65 65 NP NP NP NP NP NP NP NP 600 600 600 600 NP NP NP NP HA–5 HA–5 HA–5 HA–5 G19 G19, G24 G19 G3, G19 20 21 22 23 24 90 90 90 90 90 65 65 65 65 65 600 600 600 600 600 NP NP NP NP NP 600 600 600 600 600 600 600 NP 600 600 HA–5 HA–5 HA–5 HA–5 HA–5 G19 G19 G19 G19 G19, G24 25 26 27 28 29 90 90 90 90 90 65 65 65 65 65 600 600 600 600 NP NP NP NP NP NP 600 600 NP NP 600 600 600 NP NP 600 HA–5 HA–5 HA–5 HA–5 HA–5 G19 G19, G24 G19 G19, G24 G19, W14 30 31 32 33 34 95 95 95 95 95 65 65 65 65 65 NP NP NP NP NP 600 600 600 NP NP 600 600 NP 600 600 600 NP NP 600 600 HA–5 HA–5 HA–5 HA–5 HA–5 G19 G19 G19, W12 G19 G19, G24 35 36 37 95 95 95 65 65 65 NP NP NP 600 NP NP NP 600 600 NP 600 600 HA–5 HA–5 HA–5 G19, W12 G19 G19, G24 38 39 40 41 95 95 95 95 70 70 70 70 NP NP NP NP 600 600 NP NP 600 NP 600 600 600 NP 600 600 HA–5 HA–5 HA–5 HA–5 G19 G19, W12 G19 G19, G24 127 Notes This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 24.9 24.9 21.1 21.1 ... ... ... ... 24.7 24.7 21.0 21.0 ... ... ... ... 23.3 22.0 19.8 18.7 22.4 19.9 19.1 16.9 21.8 18.5 18.5 15.8 21.4 17.7 18.2 15.0 21.2 17.4 18.0 14.8 21.0 17.2 17.8 14.6 20.8 17.0 17.7 14.5 20.6 16.8 17.5 14.3 20.3 16.6 17.3 14.2 20.0 16.4 17.0 14.0 5 6 7 8 9 10 24.9 24.9 21.1 21.1 24.9 24.9 ... ... ... ... ... ... 24.7 24.7 21.0 21.0 24.7 24.7 ... ... ... ... ... ... 23.3 22.0 19.8 18.7 23.3 22.0 22.4 19.9 19.1 16.9 22.4 19.9 21.8 18.5 18.5 15.8 21.8 18.5 21.4 17.7 18.2 15.0 21.4 17.7 21.2 17.4 18.0 14.8 21.2 17.4 21.0 17.2 17.8 14.6 21.0 17.2 20.8 17.0 17.7 14.5 20.8 17.0 20.6 16.8 17.5 14.3 20.6 16.8 20.3 16.6 17.3 14.2 20.3 16.6 20.0 16.4 17.0 14.0 20.0 16.4 11 12 13 14 15 26.9 26.9 26.9 26.9 22.8 26.9 26.9 26.9 26.9 22.8 26.6 26.6 26.6 26.6 22.6 25.5 25.5 25.5 25.5 21.7 24.9 24.9 24.9 24.9 21.1 24.7 24.7 24.7 24.7 21.0 24.7 24.7 24.7 24.7 21.0 24.7 24.7 24.7 24.7 21.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 26.9 22.8 26.9 22.8 26.9 22.8 26.9 22.8 26.6 22.6 26.6 22.6 25.5 21.7 25.5 21.7 24.9 21.1 24.9 21.1 24.7 21.0 24.7 21.0 24.7 21.0 24.7 21.0 24.7 21.0 24.7 21.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 24 25.7 25.7 25.7 25.7 21.9 ... ... ... ... ... 25.7 25.7 25.7 25.7 21.9 ... ... ... ... ... 24.8 24.8 24.8 24.8 21.1 23.9 23.9 23.9 23.9 20.3 23.3 23.3 23.3 23.3 19.8 23.1 23.1 23.1 23.1 19.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 29 25.7 21.9 25.7 21.9 25.7 ... ... ... ... ... 25.7 21.9 25.7 21.9 25.7 ... ... ... ... ... 24.8 21.1 24.8 21.1 24.8 23.9 20.3 23.9 20.3 23.9 23.3 19.8 23.3 19.8 23.3 23.1 19.6 23.1 19.6 23.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 33 34 27.1 27.1 27.1 27.1 23.1 ... ... ... ... ... 27.1 27.1 27.1 27.1 23.0 ... ... ... ... ... 26.2 26.2 26.2 26.2 22.3 25.2 25.2 25.2 25.2 21.4 24.6 24.6 24.6 24.6 20.9 24.3 24.3 24.3 24.3 20.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 27.1 27.1 23.1 ... ... ... 27.1 27.1 23.0 ... ... ... 26.2 26.2 22.3 25.2 25.2 21.4 24.6 24.6 20.9 24.3 24.3 20.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 27.1 27.1 27.1 23.1 ... ... ... ... 27.1 27.1 27.1 23.0 ... ... ... ... 26.2 26.2 26.2 22.3 25.2 25.2 25.2 21.4 24.6 24.6 24.6 20.9 24.3 24.3 24.3 20.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 128 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 19.1 16.2 16.3 13.8 14.9 14.9 12.7 12.7 11.6 11.6 9.9 9.9 9.0 9.0 7.7 7.7 6.9 6.9 5.9 5.9 5.2 5.2 4.4 4.4 4.0 4.0 3.4 3.4 3.1 3.1 2.6 2.6 2.4 2.4 2.0 2.0 1.9 1.9 1.6 1.6 1.6 1.6 1.4 1.4 1.3 1.3 1.1 1.1 1.0 1.0 0.85 0.85 0.86 0.86 0.73 0.73 0.71 0.71 0.60 0.60 5 6 7 8 9 10 19.1 16.2 16.3 13.8 19.1 16.2 14.9 14.9 12.7 12.7 14.9 14.9 11.6 11.6 9.9 9.9 11.6 11.6 9.0 9.0 7.7 7.7 9.0 9.0 6.9 6.9 5.9 5.9 6.9 6.9 5.2 5.2 4.4 4.4 5.2 5.2 4.0 4.0 3.4 3.4 4.0 4.0 3.1 3.1 2.6 2.6 3.1 3.1 2.4 2.4 2.0 2.0 2.4 2.4 1.9 1.9 1.6 1.6 1.9 1.9 1.6 1.6 1.4 1.4 1.6 1.6 1.3 1.3 1.1 1.1 1.3 1.3 1.0 1.0 0.85 0.85 1.0 1.0 0.86 0.86 0.73 0.73 0.86 0.86 0.71 0.71 0.60 0.60 0.71 0.71 11 12 13 14 15 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 24 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 29 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 33 34 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 129 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 5 6 22Cr–13Ni–5Mn 22Cr–13Ni–5Mn 22Cr–13Ni–5Mn 22Cr–13Ni–5Mn 22Cr–13Ni–5Mn 22Cr–13Ni–5Mn Castings Forgings Smls. tube Plate Wld. tube Wld. tube SA–351 SA–182 SA–213 SA–240 SA–249 SA–249 CG6MMN FXM–19 XM–19 XM–19 TPXM–19 TPXM–19 J93790 S20910 S20910 S20910 S20910 S20910 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 3 3 3 3 3 3 7 8 9 10 22Cr–13Ni–5Mn 22Cr–13Ni–5Mn 22Cr–13Ni–5Mn 22Cr–13Ni–5Mn Smls. & wld. pipe Smls. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–358 TPXM–19 TPXM–19 TPXM–19 XM–19 S20910 S20910 S20910 S20910 ... ... ... 1 ... ... ... ... 8 8 8 8 3 3 3 3 11 12 13 14 22Cr–13Ni–5Mn 22Cr–13Ni–5Mn 22Cr–13Ni–5Mn 22Cr–13Ni–5Mn Smls. & wld. fittings SA–403 Bar SA–479 Wld. pipe SA–813 Wld. pipe SA–814 XM–19 XM–19 TPXM–19 TPXM–19 S20910 S20910 S20910 S20910 ... ... ... ... ... ... ... ... 8 8 8 8 3 3 3 3 15 16 17 23Cr–4Ni–Mo–Cu–N 23Cr–4Ni–Mo–Cu–N 23Cr–4Ni–Mo–Cu–N Plate Smls. tube Wld. tube SA–240 SA–789 SA–789 ... ... ... S32304 ... S32304 ... S32304 ... ... >1 >1 10H 10H 10H 1 1 1 18 19 20 21 23Cr–4Ni–Mo–Cu–N 23Cr–4Ni–Mo–Cu–N 23Cr–4Ni–Mo–Cu–N 23Cr–4Ni–Mo–Cu–N Smls. pipe Wld. pipe Smls. tube Wld. tube SA–790 SA–790 SA–789 SA–789 ... ... ... ... S32304 S32304 S32304 S32304 ... ... ... ... ... ... ≤1 ≤1 10H 10H 10H 10H 1 1 1 1 22 23 24 25 26 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni Smls. & wld. fittings SA–403 Smls. tube SA–213 Smls. tube SA–213 Plate SA–240 Plate SA–240 309 TP309S TP309S 309S 309S S30900 S30908 S30908 S30908 S30908 ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 2 2 2 2 2 27 28 29 30 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni Wld. tube Wld. tube Smls. & wld. pipe Smls. pipe SA–249 SA–249 SA–312 SA–312 TP309S TP309S TP309S TP309S S30908 S30908 S30908 S30908 ... ... ... ... ... ... ... ... 8 8 8 8 2 2 2 2 31 32 33 34 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni Wld. Wld. Wld. Wld. pipe pipe pipe pipe SA–312 SA–312 SA–312 SA–312 TP309S TP309S TP309S TP309S S30908 S30908 S30908 S30908 ... ... ... ... ... ... ... ... 8 8 8 8 2 2 2 2 35 36 37 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni Wld. pipe Bar Bar SA–358 SA–479 SA–479 309S 309S 309S S30908 1 S30908 ... S30908 ... ... ... ... 8 8 8 2 2 2 38 39 40 41 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni Wld. Wld. Wld. Wld. SA–813 SA–813 SA–814 SA–814 TP309S TP309S TP309S TP309S S30908 S30908 S30908 S30908 ... ... ... ... 8 8 8 8 2 2 2 2 Line No. Nominal Composition Product Form pipe pipe pipe pipe Spec. No. 130 ... ... ... ... This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 85 100 100 100 100 100 42.5 55 55 55 55 55 NP NP NP NP NP NP NP 800 NP 800 800 NP 1050 1200 1200 1200 NP 1200 650 650 NP 650 NP 650 HA–2 HA–6 HA–6 HA–6 HA–6 HA–6 G1 G5, T8 T8 G5, T8 G5, W12 G24, T8 7 8 9 10 100 100 100 100 55 55 55 55 NP NP NP NP 800 NP NP 800 NP 1200 1200 NP NP 650 650 NP HA–6 HA–6 HA–6 HA–6 G5, W12 T8 G24, T8 G5, W12 11 12 13 14 100 100 100 100 55 55 55 55 NP NP NP NP 800 800 800 800 1200 1200 NP NP 650 650 NP NP HA–6 HA–6 HA–6 HA–6 G5, G5, G5, G5, 15 16 17 87 87 87 58 58 58 NP NP NP NP NP NP 600 600 600 600 600 600 HA–6 HA–6 HA–6 G19 G19 G19, G24 18 19 20 21 87 87 100 100 58 58 65 65 NP NP NP NP NP NP NP NP 600 600 600 600 600 600 600 600 HA–6 HA–6 HA–5 HA–5 G19 G19, G24 G19 G19, G24 22 23 24 25 26 75 75 75 75 75 30 30 30 30 30 NP 1500 1500 1500 1500 800 NP NP 800 NP 1500 1500 1500 1500 1500 650 650 650 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 G5, G12, T5, W12, W14 G5, G12, T5 G12, T6 G5, G12, T5 G12, T6 27 28 29 30 75 75 75 75 30 30 30 30 NP NP 1500 1500 NP NP 800 NP 1500 1500 1500 1500 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, G24, T5 G12, G24, T6 G5, G12, T5, W12, W14 G12, T6 31 32 33 34 75 75 75 75 30 30 30 30 1500 1500 1500 1500 NP NP NP NP NP NP 1500 1500 NP NP 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T5, W13 G12, T6, W13 G3, G5, G12, G24, T5 G3, G12, G24, T6 35 36 37 75 75 75 30 30 30 NP 1000 1000 800 NP NP NP 1000 1000 NP 650 650 HA–2 HA–2 HA–2 G5, W12 G5, G12, G22, T5 G12, G22, T6 38 39 40 41 75 75 75 75 30 30 30 30 NP NP NP NP NP NP NP NP 1500 1500 1500 1500 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, G24, T5 G12, G24, T6 G5, G12, G24, T5 G12, G24, T6 131 Notes T8, W12, W14 G22, T8 W12 W12 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 19.4 28.6 28.6 28.6 28.6 24.3 ... ... ... ... ... ... 19.3 28.4 28.4 28.4 28.4 24.1 ... ... ... ... ... ... 17.8 26.9 26.9 26.9 26.9 22.9 16.8 26.0 26.0 26.0 26.0 22.1 16.0 25.5 25.5 25.5 25.5 21.6 15.4 25.1 25.0 25.1 25.1 21.2 15.2 24.9 24.6 24.9 24.9 20.9 14.9 24.7 24.2 24.7 24.7 20.6 14.7 24.5 23.9 24.5 24.5 20.3 14.6 24.2 23.5 24.2 24.2 20.0 14.4 23.9 23.3 23.9 ... 19.8 14.2 23.6 23.0 23.6 ... 19.5 7 8 9 10 28.6 28.6 24.3 28.6 ... ... ... ... 28.4 28.4 24.1 28.4 ... ... ... ... 26.9 26.9 22.9 26.9 26.0 26.0 22.1 26.0 25.5 25.5 21.6 25.5 25.1 25.0 21.2 25.1 24.9 24.6 20.9 24.9 24.7 24.2 20.6 24.7 24.5 23.9 20.3 24.5 24.2 23.5 20.0 24.2 ... 23.3 19.8 ... ... 23.0 19.5 ... 11 12 13 14 28.6 28.6 28.6 28.6 ... ... ... ... 28.4 28.4 28.4 28.4 ... ... ... ... 26.9 26.9 26.9 26.9 26.0 26.0 26.0 26.0 25.5 25.5 25.5 25.5 25.1 25.1 25.1 25.1 24.9 24.9 24.9 24.9 24.7 24.7 24.7 24.7 24.5 24.5 24.5 24.5 24.2 24.2 24.2 24.2 23.9 23.9 ... ... 23.6 23.6 ... ... 15 16 17 24.9 24.9 21.1 ... ... ... 24.0 24.0 20.4 ... ... ... 22.5 22.5 19.1 21.7 21.7 18.5 21.3 21.3 18.1 21.0 21.0 17.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 18 19 20 21 24.9 21.1 28.6 24.3 ... ... ... ... 24.0 20.4 27.6 23.4 ... ... ... ... 22.5 19.1 25.9 22.0 21.7 18.5 25.0 21.3 21.3 18.1 24.6 20.9 21.0 17.9 24.3 20.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 26 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 20.0 20.0 17.5 20.0 17.5 ... ... ... ... ... 20.0 20.0 16.1 20.0 16.1 20.0 20.0 15.1 20.0 15.1 19.4 19.4 14.4 19.4 14.4 18.8 18.8 13.9 18.8 13.9 18.5 18.5 13.7 18.5 13.7 18.2 18.2 13.5 18.2 13.5 18.0 18.0 13.3 18.0 13.3 17.7 17.7 13.1 17.7 13.1 17.5 17.5 12.9 17.5 12.9 17.2 17.2 12.7 17.2 12.7 27 28 29 30 17.0 17.0 20.0 20.0 ... ... ... ... 17.0 14.9 20.0 17.5 ... ... ... ... 17.0 13.7 20.0 16.1 17.0 12.8 20.0 15.1 16.5 12.2 19.4 14.4 15.9 11.8 18.8 13.9 15.7 11.6 18.5 13.7 15.5 11.5 18.2 13.5 15.3 11.3 18.0 13.3 15.1 11.2 17.7 13.1 14.8 11.0 17.5 12.9 14.6 10.8 17.2 12.7 31 32 33 34 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 17.5 17.0 14.9 ... ... ... ... 20.0 16.1 17.0 13.7 20.0 15.1 17.0 12.8 19.4 14.4 16.5 12.2 18.8 13.9 15.9 11.8 18.5 13.7 15.7 11.6 18.2 13.5 15.5 11.5 18.0 13.3 15.3 11.3 17.7 13.1 15.1 11.2 17.5 12.9 14.8 11.0 17.2 12.7 14.6 10.8 35 36 37 20.0 20.0 20.0 ... ... ... 20.0 20.0 17.5 ... ... ... 20.0 20.0 16.1 20.0 20.0 15.1 19.4 19.4 14.4 18.8 18.8 13.9 18.5 18.5 13.7 18.2 18.2 13.5 18.0 18.0 13.3 17.7 17.7 13.1 ... 17.5 12.9 ... 17.2 12.7 38 39 40 41 17.0 17.0 17.0 17.0 ... ... ... ... 17.0 14.9 17.0 14.9 ... ... ... ... 17.0 13.7 17.0 13.7 17.0 12.8 17.0 12.8 16.5 12.2 16.5 12.2 15.9 11.8 15.9 11.8 15.7 11.6 15.7 11.6 15.5 11.5 15.5 11.5 15.3 11.3 15.3 11.3 15.1 11.2 15.1 11.2 14.8 11.0 14.8 11.0 14.6 10.8 14.6 10.8 132 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 14.1 23.2 22.7 23.2 ... 19.3 13.9 22.8 22.5 22.8 ... 19.1 13.6 22.3 22.2 22.3 ... 18.9 ... 20.4 20.4 20.4 ... 17.3 ... 13.0 13.0 13.0 ... 11.1 ... 8.3 8.3 8.3 ... 7.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 ... 22.7 19.3 ... ... 22.5 19.1 ... ... 22.2 18.9 ... ... 20.4 17.3 ... ... 13.0 11.1 ... ... 8.3 7.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 23.2 23.2 ... ... 22.8 22.8 ... ... 22.3 22.3 ... ... 20.4 20.4 ... ... 13.0 13.0 ... ... 8.3 8.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 18 19 20 21 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 26 15.9 15.9 12.5 15.9 12.5 9.9 9.9 9.9 9.9 9.9 7.1 7.1 7.1 7.1 7.1 5.0 5.0 5.0 5.0 5.0 3.6 3.6 3.6 3.6 3.6 2.5 2.5 2.5 2.5 2.5 1.5 1.5 1.5 1.5 1.5 0.80 0.80 0.80 0.80 0.80 0.50 0.50 0.50 0.50 0.50 0.40 0.40 0.40 0.40 0.40 0.30 0.30 0.30 0.30 0.30 0.20 0.20 0.20 0.20 0.20 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 13.5 10.6 15.9 12.5 8.4 8.4 9.9 9.9 6.0 6.0 7.1 7.1 4.3 4.3 5.0 5.0 3.1 3.1 3.6 3.6 2.1 2.1 2.5 2.5 1.3 1.3 1.5 1.5 0.68 0.68 0.80 0.80 0.43 0.43 0.50 0.50 0.34 0.34 0.40 0.40 0.26 0.26 0.30 0.30 0.17 0.17 0.20 0.20 ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 15.9 12.5 13.5 10.6 9.9 9.9 8.4 8.4 7.1 7.1 6.0 6.0 5.0 5.0 4.3 4.3 3.6 3.6 3.1 3.1 2.5 2.5 2.1 2.1 1.5 1.5 1.3 1.3 0.80 0.80 0.68 0.68 0.50 0.50 0.43 0.43 0.40 0.40 0.34 0.34 0.30 0.30 0.26 0.26 0.20 0.20 0.17 0.17 ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 ... 15.9 12.5 ... 9.9 9.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 13.5 10.6 13.5 10.6 8.4 8.4 8.4 8.4 6.0 6.0 6.0 6.0 4.3 4.3 4.3 4.3 3.1 3.1 3.1 3.1 2.1 2.1 2.1 2.1 1.3 1.3 1.3 1.3 0.68 0.68 0.68 0.68 0.43 0.43 0.43 0.43 0.34 0.34 0.34 0.34 0.26 0.26 0.26 0.26 0.17 0.17 0.17 0.17 ... ... ... ... ... ... ... ... ... ... ... ... 133 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni Smls. tube Smls. tube Plate Plate SA–213 SA–213 SA–240 SA–240 TP309H TP309H 309H 309H S30909 S30909 S30909 S30909 ... ... ... ... ... ... ... ... 8 8 8 8 2 2 2 2 5 6 7 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni Wld. tube Wld. tube Wld. tube SA–249 SA–249 SA–249 TP309H TP309H TP309H S30909 ... S30909 ... S30909 ... ... ... ... 8 8 8 2 2 2 8 9 10 11 12 13 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni 23Cr–12Ni Smls. pipe Smls. pipe Wld. pipe Wld. pipe Bar Bar SA–312 SA–312 SA–312 SA–312 SA–479 SA–479 TP309H TP309H TP309H TP309H 309H 309H S30909 S30909 S30909 S30909 S30909 S30909 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 2 2 2 2 2 2 14 15 16 17 18 19 23Cr–12Ni–Cb 23Cr–12Ni–Cb 23Cr–12Ni–Cb 23Cr–12Ni–Cb 23Cr–12Ni–Cb 23Cr–12Ni–Cb Smls. tube Smls. tube Plate Plate Wld. tube Wld. tube SA–213 SA–213 SA–240 SA–240 SA–249 SA–249 TP309Cb TP309Cb 309Cb 309Cb TP309Cb TP309Cb S30940 S30940 S30940 S30940 S30940 S30940 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 2 2 2 2 2 2 20 21 22 23 23Cr–12Ni–Cb 23Cr–12Ni–Cb 23Cr–12Ni–Cb 23Cr–12Ni–Cb Smls. & wld. pipe Smls. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP309Cb TP309Cb TP309Cb TP309Cb S30940 S30940 S30940 S30940 ... ... ... ... ... ... ... ... 8 8 8 8 2 2 2 2 24 25 26 27 28 29 23Cr–12Ni–Cb 23Cr–12Ni–Cb 23Cr–12Ni–Cb 23Cr–12Ni–Cb 23Cr–12Ni–Cb 23Cr–12Ni–Cb Bar Bar Wld. Wld. Wld. Wld. pipe pipe pipe pipe SA–479 SA–479 SA–813 SA–813 SA–814 SA–814 309Cb 309Cb TP309Cb TP309Cb TP309Cb TP309Cb S30940 S30940 S30940 S30940 S30940 S30940 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 2 2 2 2 2 2 30 31 32 24Cr–10Ni–4Mo–N 25Cr–4Ni–4Mo–Ti 25Cr–4Ni–4Mo–Ti Castings Plate Wld. tube SA–995 SA–240 SA–268 2A ... ... J93345 ... S44635 ... S44635 ... ... ... ... 10H 10I 10I 1 1 1 33 34 35 25Cr–5Ni–3Mo–2Cu 25Cr–5Ni–3Mo–2Cu 25Cr–5Ni–3Mo–2Cu Castings Plate Bar SA–995 SA–240 SA–479 1B ... ... J93372 ... S32550 ... S32550 ... ... ... ... 10H 10H 10H 1 1 1 36 37 38 39 25Cr–5Ni–3Mo–2Cu 25Cr–5Ni–3Mo–2Cu 25Cr–5Ni–3Mo–2Cu 25Cr–5Ni–3Mo–2Cu Smls. tube Wld. tube Smls. pipe Wld. pipe SA–789 SA–789 SA–790 SA–790 ... ... ... ... S32550 S32550 S32550 S32550 ... ... ... ... ... ... ... ... 10H 10H 10H 10H 1 1 1 1 40 41 42 43 44 45 25Cr–6Ni–Mo–N 25Cr–6.5Ni–3Mo–N 25Cr–6.5Ni–3Mo–N 25Cr–6.5Ni–3Mo–N 25Cr–6.5Ni–3Mo–N 25Cr–6.5Ni–3Mo–N Plate Smls. tube Wld. tube Smls. pipe Wld. pipe Plate SA–240 SA–789 SA–789 SA–790 SA–790 SA–240 ... ... ... ... ... ... S31200 S31260 S31260 S31260 S31260 S31260 ... ... ... ... ... ... ... ... ... ... ... ... 10H 10H 10H 10H 10H 10H 1 1 1 1 1 1 Line No. Nominal Composition Product Form Spec. No. 134 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 75 75 75 75 30 30 30 30 1500 1500 1500 1500 NP NP NP NP 1500 1500 1500 1500 NP NP NP NP HA–2 HA–2 HA–2 HA–2 G5, T6 T7 G5, H1, T6 H1, T7 5 6 7 75 75 75 30 30 30 NP NP NP 800 NP NP NP 1500 1500 NP NP NP HA–2 HA–2 HA–2 G5, W12 G5, G24, T6 G24, T7 8 9 10 11 12 13 75 75 75 75 75 75 30 30 30 30 30 30 1500 1500 1500 1500 1500 1500 NP NP NP NP NP NP 1500 1500 1500 1500 1500 1500 NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, T7 G3, G3, G5, T7 14 15 16 17 18 19 75 75 75 75 75 75 30 30 30 30 30 30 NP NP NP NP NP NP NP NP NP NP NP NP 1500 1500 1500 1500 1500 1500 650 650 650 650 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, G12, T5 G12, T6 G5, G12, T5 G12, T6 G5, G12, G24, T5 G12, G24, T6 20 21 22 23 75 75 75 75 30 30 30 30 NP NP NP NP 800 NP NP NP 1500 1500 1500 1500 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T5, W12 G12, T6 G5, G12, G24, T5 G12, G24, T6 24 25 26 27 28 29 75 75 75 75 75 75 30 30 30 30 30 30 NP NP NP NP NP NP NP NP NP NP NP NP 1000 1000 1500 1500 1500 1500 650 650 650 650 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, G12, G22 G12, G22 G5, G12, G24, T5 G12, G24, T6 G5, G12, G13, G24, T5 G12, G24, T6 30 31 32 95 90 90 65 75 75 NP NP NP NP NP NP 600 500 500 600 500 500 HA–5 HA–5 HA–5 G1, G19 G19 G19, G24 33 34 35 100 110 110 70 80 80 NP NP NP 600 NP NP NP 500 500 NP 500 500 HA–5 HA–5 HA–5 G19, G29 G19 G19 36 37 38 39 110 110 110 110 80 80 80 80 NP NP NP NP NP NP NP NP 500 500 500 500 500 500 500 500 HA–5 HA–5 HA–5 HA–5 G19 G19, G24 G19 G19, G24 40 41 42 43 44 45 100 100 100 100 100 100 65 65 65 65 65 70 NP NP NP NP NP NP NP NP NP NP NP NP 600 650 650 650 650 650 600 650 650 650 650 650 HA–5 HA–5 HA–5 HA–5 HA–5 HA–5 G19 G19 G19, G24 G19 G19, G24 G19 135 Notes T6 G5, G24, T6 G24, T7 T6 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 17.5 20.0 17.5 ... ... ... ... 20.0 16.1 20.0 16.1 20.0 15.1 20.0 15.1 19.4 14.4 19.4 14.4 18.8 13.9 18.8 13.9 18.5 13.7 18.5 13.7 18.2 13.5 18.2 13.5 18.0 13.3 18.0 13.3 17.7 13.1 17.7 13.1 17.5 12.9 17.5 12.9 17.2 12.7 17.2 12.7 5 6 7 20.0 17.0 17.0 ... ... ... 20.0 17.0 14.9 ... ... ... 20.0 17.0 13.7 20.0 17.0 12.8 19.4 16.5 12.2 18.8 15.9 11.8 18.5 15.7 11.6 18.2 15.5 11.5 18.0 15.3 11.3 17.7 15.1 11.2 ... 14.8 11.0 ... 14.6 10.8 8 9 10 11 12 13 20.0 20.0 17.0 17.0 20.0 20.0 ... ... ... ... ... ... 20.0 17.5 17.0 14.9 20.0 17.5 ... ... ... ... ... ... 20.0 16.1 17.0 13.7 20.0 16.1 20.0 15.1 17.0 12.8 20.0 15.1 19.4 14.4 16.5 12.2 19.4 14.4 18.8 13.9 15.9 11.8 18.8 13.9 18.5 13.7 15.7 11.6 18.5 13.7 18.2 13.5 15.5 11.5 18.2 13.5 18.0 13.3 15.3 11.3 18.0 13.3 17.7 13.1 15.1 11.2 17.7 13.1 17.5 12.9 14.8 11.0 17.5 12.9 17.2 12.7 14.6 10.8 17.2 12.7 14 15 16 17 18 19 20.0 20.0 20.0 20.0 17.0 17.0 ... ... ... ... ... ... 20.0 17.5 20.0 17.5 17.0 14.9 ... ... ... ... ... ... 20.0 16.1 20.0 16.1 17.0 13.7 20.0 15.1 20.0 15.1 17.0 12.8 19.4 14.4 19.4 14.4 16.5 12.2 18.8 13.9 18.8 13.9 15.9 11.8 18.5 13.7 18.5 13.7 15.7 11.6 18.2 13.5 18.2 13.5 15.5 11.5 18.0 13.3 18.0 13.3 15.3 11.3 17.7 13.1 17.7 13.1 15.1 11.2 17.5 12.9 17.5 12.9 14.8 11.0 17.2 12.7 17.2 12.7 14.6 10.8 20 21 22 23 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 17.5 17.0 14.9 ... ... ... ... 20.0 16.1 17.0 13.7 20.0 15.1 17.0 12.8 19.4 14.4 16.5 12.2 18.8 13.9 15.9 11.8 18.5 13.7 15.7 11.6 18.2 13.5 15.5 11.5 18.0 13.3 15.3 11.3 17.7 13.1 15.1 11.2 17.5 12.9 14.8 11.0 17.2 12.7 14.6 10.8 24 25 26 27 28 29 20.0 20.0 17.0 17.0 17.0 17.0 ... ... ... ... ... ... 20.0 17.5 17.0 14.9 17.0 14.9 ... ... ... ... ... ... 20.0 16.1 17.0 13.7 17.0 13.7 20.0 15.1 17.0 12.8 17.0 12.8 19.4 14.4 16.5 12.2 16.5 12.2 18.8 13.9 15.9 11.8 15.9 11.8 18.5 13.7 15.7 11.6 15.7 11.6 18.2 13.5 15.5 11.5 15.5 11.5 18.0 13.3 15.3 11.3 15.3 11.3 17.7 13.1 15.1 11.2 15.1 11.2 17.5 12.9 14.8 11.0 14.8 11.0 17.2 12.7 14.6 10.8 14.6 10.8 30 31 32 27.1 25.7 21.9 ... ... ... 27.1 24.9 21.2 ... ... ... 25.1 23.5 19.9 24.2 22.5 19.1 24.2 22.0 18.7 24.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 28.6 31.4 31.4 ... ... ... 28.6 31.3 31.3 ... ... ... 27.9 29.5 29.5 27.5 28.6 28.6 27.5 28.2 28.2 27.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 31.4 26.7 31.4 26.7 ... ... ... ... 31.3 26.6 31.3 26.6 ... ... ... ... 29.5 25.1 29.5 25.1 28.6 24.3 28.6 24.3 28.2 24.0 28.2 24.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 40 41 42 43 44 45 28.6 28.6 24.3 28.6 24.3 28.6 ... ... ... ... ... ... 28.6 28.5 24.3 28.5 24.3 28.5 ... ... ... ... ... ... 27.1 27.1 23.0 27.1 23.0 27.1 26.3 26.4 22.5 26.4 22.5 26.4 26.1 26.3 22.4 26.3 22.4 26.3 26.1 26.3 22.4 26.3 22.4 26.3 ... 26.3 22.4 26.3 22.4 26.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 136 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 16.9 12.5 16.9 12.5 13.8 12.3 13.8 12.3 10.3 10.3 10.3 10.3 7.6 7.6 7.6 7.6 5.5 5.5 5.5 5.5 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 2.2 2.2 2.2 2.2 1.7 1.7 1.7 1.7 1.3 1.3 1.3 1.3 1.0 1.0 1.0 1.0 0.75 0.75 0.75 0.75 ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 ... 14.4 10.6 ... 11.7 10.4 ... 8.8 8.8 ... 6.5 6.5 ... 4.7 4.7 ... 3.4 3.4 ... 2.6 2.6 ... 1.9 1.9 ... 1.4 1.4 ... 1.1 1.1 ... 0.82 0.82 ... 0.64 0.64 ... ... ... ... ... ... ... ... ... 8 9 10 11 12 13 16.9 12.5 14.4 10.6 16.9 12.5 13.8 12.3 11.7 10.4 13.8 12.3 10.3 10.3 8.8 8.8 10.3 10.3 7.6 7.6 6.5 6.5 7.6 7.6 5.5 5.5 4.7 4.7 5.5 5.5 4.0 4.0 3.4 3.4 4.0 4.0 3.0 3.0 2.6 2.6 3.0 3.0 2.2 2.2 1.9 1.9 2.2 2.2 1.7 1.7 1.4 1.4 1.7 1.7 1.3 1.3 1.1 1.1 1.3 1.3 1.0 1.0 0.82 0.82 1.0 1.0 0.75 0.75 0.64 0.64 0.75 0.75 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 17 18 19 15.9 12.5 15.9 12.5 13.5 10.6 9.9 9.9 9.9 9.9 8.4 8.4 7.1 7.1 7.1 7.1 6.0 6.0 5.0 5.0 5.0 5.0 4.3 4.3 3.6 3.6 3.6 3.6 3.1 3.1 2.5 2.5 2.5 2.5 2.1 2.1 1.5 1.5 1.5 1.5 1.3 1.3 0.80 0.80 0.80 0.80 0.68 0.68 0.50 0.50 0.50 0.50 0.43 0.43 0.40 0.40 0.40 0.40 0.34 0.34 0.30 0.30 0.30 0.30 0.26 0.26 0.20 0.20 0.20 0.20 0.17 0.17 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 15.9 12.5 13.5 10.6 9.9 9.9 8.4 8.4 7.1 7.1 6.0 6.0 5.0 5.0 4.3 4.3 3.6 3.6 3.1 3.1 2.5 2.5 2.1 2.1 1.5 1.5 1.3 1.3 0.80 0.80 0.68 0.68 0.50 0.50 0.43 0.43 0.40 0.40 0.34 0.34 0.30 0.30 0.26 0.26 0.20 0.20 0.17 0.17 ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 28 29 15.9 12.5 13.5 10.6 13.5 10.6 9.9 9.9 8.4 8.4 8.4 8.4 ... ... 6.0 6.0 6.0 6.0 ... ... 4.3 4.3 4.3 4.3 ... ... 3.1 3.1 3.1 3.1 ... ... 2.1 2.1 2.1 2.1 ... ... 1.3 1.3 1.3 1.3 ... ... 0.68 0.68 0.68 0.68 ... ... 0.43 0.43 0.43 0.43 ... ... 0.34 0.34 0.34 0.34 ... ... 0.26 0.26 0.26 0.26 ... ... 0.17 0.17 0.17 0.17 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 40 41 42 43 44 45 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 137 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 5 25Cr–7Ni–3Mo–W–Cu–N 25Cr–7Ni–3Mo–W–Cu–N 25Cr–7Ni–3Mo–W–Cu–N 25Cr–7Ni–3Mo–W–Cu–N 25Cr–7Ni–3Mo–W–Cu–N Forgings Smls. tube Wld. tube Smls. pipe Wld. pipe SA–182 SA–789 SA–789 SA–790 SA–790 F54 ... ... ... ... S39274 S39274 S39274 S39274 S39274 ... ... ... ... ... ... ... ... ... ... 10H 10H 10H 10H 10H 1 1 1 1 1 6 7 8 9 10 11 25Cr–7Ni–4Mo–N 25Cr–7Ni–4Mo–N 25Cr–7Ni–4Mo–N 25Cr–7Ni–4Mo–N 25Cr–7Ni–4Mo–N 25Cr–7Ni–4Mo–N Forgings Plate, sheet Smls. tube Wld. tube Smls. pipe Wld. pipe SA–182 SA–240 SA–789 SA–789 SA–790 SA–790 F53 ... ... ... ... ... S32750 S32750 S32750 S32750 S32750 S32750 ... ... ... ... ... ... ... ... ≤1 ≤1 ≤1 ≤1 10H 10H 10H 10H 10H 10H 1 1 1 1 1 1 12 13 14 15 25Cr–7.5Ni–3.5Mo–N–Cu–W 25Cr–7.5Ni–3.5Mo–N–Cu–W 25Cr–7.5Ni–3.5Mo–N–Cu–W 25Cr–7.5Ni–3.5Mo–N–Cu–W Castings Forgings Plate Bar SA–995 SA–182 SA–240 SA–479 CD3MWCuN F55 ... ... J93380 S32760 S32760 S32760 ... ... ... Annealed ... ... ... ... 10H 10H 10H 10H 1 1 1 1 16 17 18 19 20 25Cr–7.5Ni–3.5Mo–N–Cu–W 25Cr–7.5Ni–3.5Mo–N–Cu–W 25Cr–7.5Ni–3.5Mo–N–Cu–W 25Cr–7.5Ni–3.5Mo–N–Cu–W 25Cr–7.5Ni–3.5Mo–N–Cu–W Smls. tube Wld. tube Smls. pipe Wld. pipe Smls. & wld. fittings SA–789 SA–789 SA–790 SA–790 SA–815 ... ... ... ... ... S32760 S32760 S32760 S32760 S32760 ... ... ... ... ... ... ... ... ... ... 10H 10H 10H 10H 10H 1 1 1 1 1 21 22 23 25Cr–12Ni 25Cr–12Ni 25Cr–12Ni Castings Castings Cast pipe SA–351 SA–351 SA–451 CH8 CH8 CPH8 J93400 ... J93400 ... J93400 ... ... ... ... 8 8 8 2 2 2 24 25 26 25Cr–12Ni 25Cr–12Ni 25Cr–12Ni Castings Castings Cast pipe SA–351 SA–351 SA–451 CH20 CH20 CPH20 J93402 ... J93402 ... J93402 ... ... ... ... 8 8 8 2 2 2 27 28 29 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni Castings Castings Cast pipe SA–351 SA–351 SA–451 CK20 CK20 CPK20 J94202 ... J94202 ... J94202 ... ... ... ... 8 8 8 2 2 2 30 31 32 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni Forgings Forgings Forgings SA–182 SA–182 SA–965 F310 F310 F310 S31000 ... S31000 ... S31000 ... >5 ≤5 ... 8 8 8 2 2 2 33 34 35 36 37 38 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni Smls. tube Smls. tube Plate Plate Wld. tube Wld. tube SA–213 SA–213 SA–240 SA–240 SA–249 SA–249 TP310S TP310S 310S 310S TP310S TP310S S31008 S31008 S31008 S31008 S31008 S31008 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 2 2 2 2 2 2 39 40 41 42 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni Smls. & wld. pipe Smls. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP310S TP310S TP310S TP310S S31008 S31008 S31008 S31008 ... ... ... ... ... ... ... ... 8 8 8 8 2 2 2 2 Line No. Nominal Composition ð15Þ Product Form Spec. No. 138 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 116 116 116 116 116 80 80 80 80 80 NP NP NP NP NP NP NP NP NP NP 650 650 650 650 650 650 650 650 650 650 HA–8 HA–8 HA–8 HA–8 HA–8 G19 G19 G19, G24 G19 G19, G24 6 7 8 9 10 11 116 116 116 116 116 116 80 80 80 80 80 80 NP NP NP NP NP NP NP NP NP NP NP NP 600 600 600 600 600 600 NP NP 600 600 600 600 HA–5 HA–5 HA–5 HA–5 HA–5 HA–5 G19 G19 G19 G19, G24 G19 G19, G24 12 13 14 15 100 109 109 109 65 80 80 80 NP NP NP NP NP NP NP NP 600 600 600 600 NP NP NP NP HA–5 HA–9 HA–9 HA–9 G19, H4 G19, H4 G19 G19 16 17 18 19 20 109 109 109 109 109 80 80 80 80 80 NP NP NP NP NP NP NP NP NP NP 600 600 600 600 600 NP NP NP NP NP HA–9 HA–9 HA–9 HA–9 HA–9 G19 G19, G24 G19 G19, G24 G19, W14 21 22 23 65 65 65 28 28 28 NP NP NP 800 NP 800 1500 1500 NP 650 650 NP HA–3 HA–3 HA–3 G1, G5, G12, G16, G17, G19, T6 G1, G12, G19, T7 G5, G16, G17, G19 24 25 26 70 70 70 30 30 30 NP NP NP 800 NP 800 1500 1500 NP 650 650 NP HA–2 HA–2 HA–2 G1, G5, G12, G16, G17, T6 G1, G12, T7 G5, G16, G17 27 28 29 65 65 65 28 28 28 NP NP NP 800 NP 800 1500 1500 NP 650 650 NP HA–3 HA–3 HA–3 G1, G5, G12, G16, G17, T6 G1, G12, T8 G5, G16, G17 30 31 32 70 75 75 30 30 30 NP NP NP 800 800 800 NP 1500 1500 NP 650 650 HA–2 HA–2 HA–2 G5 G5, G12, G14, T5 G5, G12, T5 33 34 35 36 37 38 75 75 75 75 75 75 30 30 30 30 30 30 1500 1500 1500 1500 NP NP NP NP 800 NP NP NP 1500 1500 1500 1500 1500 1500 650 650 650 650 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, G12, T5 G12, T6 G5, G12, T5 G12, T6 G5, G12, G24, T5 G12, G24, T6 39 40 41 42 75 75 75 75 30 30 30 30 1500 1500 1500 1500 800 NP NP NP 1500 1500 1500 1500 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T5, W12, W14 G12, T6 G3, G5, G12, G14, G24, T5 G3, G12, G14, G24, T6 139 Notes This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 33.1 33.1 28.2 33.1 28.2 ... ... ... ... ... 33.1 33.1 28.2 33.1 28.2 ... ... ... ... ... 31.6 31.6 26.8 31.6 26.8 31.4 31.4 26.7 31.4 26.7 31.4 31.4 26.7 31.4 26.7 31.4 31.4 26.7 31.4 26.7 31.4 31.4 26.7 31.4 26.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 10 11 33.1 33.1 33.1 28.2 33.1 28.2 ... ... ... ... ... ... 33.0 33.0 33.0 28.0 33.0 28.0 ... ... ... ... ... ... 31.2 31.2 31.2 26.5 31.2 26.5 30.1 30.1 30.1 25.6 30.1 25.6 29.6 29.6 29.6 25.2 29.6 25.2 29.4 29.4 29.4 25.0 29.4 25.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 12 13 14 15 28.6 31.1 31.1 31.1 28.5 ... ... ... 28.4 30.2 30.2 30.2 27.7 ... ... ... 26.9 29.2 29.2 29.2 26.6 29.2 29.2 29.2 26.6 29.2 29.2 29.2 26.6 29.2 29.2 29.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 20 31.1 26.5 31.1 26.5 31.1 ... ... ... ... ... 30.2 25.7 30.2 25.7 30.2 ... ... ... ... ... 29.2 24.8 29.2 24.8 29.2 29.2 24.8 29.2 24.8 29.2 29.2 24.8 29.2 24.8 29.2 29.2 24.8 29.2 24.8 29.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 18.6 18.6 18.6 ... ... ... 17.0 15.3 17.0 ... ... ... 15.8 14.1 15.8 15.4 13.5 15.4 15.4 13.1 15.4 15.4 12.7 15.4 15.3 12.4 15.3 15.2 12.1 15.2 15.0 11.8 15.0 14.8 11.4 14.8 14.4 11.0 ... 13.9 10.7 ... 24 25 26 20.0 20.0 20.0 ... ... ... 18.3 16.3 18.3 ... ... ... 17.0 15.1 17.0 16.6 14.5 16.6 16.6 14.0 16.6 16.6 13.6 16.6 16.5 13.3 16.5 16.4 12.9 16.4 16.2 12.6 16.2 15.9 12.2 15.9 15.5 11.8 ... 14.9 11.4 ... 27 28 29 18.6 18.6 18.6 ... ... ... 17.0 15.3 17.0 ... ... ... 15.8 14.1 15.8 15.4 13.5 15.4 15.4 13.1 15.4 15.4 12.7 15.4 15.3 12.4 15.3 15.2 12.1 15.2 15.0 11.8 15.0 14.8 11.4 14.8 14.4 11.0 ... 13.9 10.7 ... 30 31 32 20.0 20.0 20.0 ... ... ... 19.8 20.0 20.0 ... ... ... 18.9 20.0 20.0 18.6 19.9 19.9 18.5 19.3 19.3 18.5 18.5 18.5 18.2 18.2 18.2 17.9 17.9 17.9 17.7 17.7 17.7 17.4 17.4 17.4 ... 17.2 17.2 ... 16.9 16.9 33 34 35 36 37 38 20.0 20.0 20.0 20.0 17.0 17.0 ... ... ... ... ... ... 20.0 17.6 20.0 17.6 17.0 15.0 ... ... ... ... ... ... 20.0 16.1 20.0 16.1 17.0 13.7 19.9 15.1 19.9 15.1 16.9 12.8 19.3 14.3 19.3 14.3 16.4 12.1 18.5 13.7 18.5 13.7 15.7 11.7 18.2 13.5 18.2 13.5 15.5 11.5 17.9 13.3 17.9 13.3 15.2 11.3 17.7 13.1 17.7 13.1 15.0 11.1 17.4 12.9 17.4 12.9 14.8 11.0 17.2 12.7 17.2 12.7 14.6 10.8 16.9 12.5 16.9 12.5 14.4 10.7 39 40 41 42 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 17.6 17.0 15.0 ... ... ... ... 20.0 16.1 17.0 13.7 19.9 15.1 16.9 12.8 19.3 14.3 16.4 12.1 18.5 13.7 15.7 11.7 18.2 13.5 15.5 11.5 17.9 13.3 15.2 11.3 17.7 13.1 15.0 11.1 17.4 12.9 14.8 11.0 17.2 12.7 14.6 10.8 16.9 12.5 14.4 10.7 140 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 10 11 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 12 13 14 15 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 20 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 13.2 10.3 ... 11.1 9.9 ... 8.5 8.5 ... 6.5 6.5 ... 5.0 5.0 ... 3.8 3.8 ... 2.9 2.9 ... 2.3 2.3 ... 1.8 1.8 ... 1.3 1.3 ... 0.90 0.90 ... 0.80 0.80 ... ... ... ... ... ... ... ... ... ... 24 25 26 14.3 11.0 ... 11.1 10.6 ... 8.5 8.5 ... 6.5 6.5 ... 5.0 5.0 ... 3.8 3.8 ... 2.9 2.9 ... 2.3 2.3 ... 1.8 1.8 ... 1.3 1.3 ... 0.90 0.90 ... 0.80 0.80 ... ... ... ... ... ... ... ... ... ... 27 28 29 13.2 10.3 ... 11.3 9.9 ... 9.8 9.5 ... 8.5 8.5 ... 7.3 7.3 ... 6.0 6.0 ... 4.8 4.8 ... 3.5 3.5 ... 2.4 2.4 ... 1.6 1.6 ... 1.1 1.1 ... 0.80 0.80 ... ... ... ... ... ... ... ... ... ... 30 31 32 ... 15.9 15.9 ... 9.9 9.9 ... 7.1 7.1 ... 5.0 5.0 ... 3.6 3.6 ... 2.5 2.5 ... 1.5 1.5 ... 0.80 0.80 ... 0.50 0.50 ... 0.40 0.40 ... 0.30 0.30 ... 0.20 0.20 ... ... ... ... ... ... ... ... ... 33 34 35 36 37 38 15.9 12.3 15.9 12.3 13.5 10.5 9.9 9.9 9.9 9.9 8.4 8.4 7.1 7.1 7.1 7.1 6.0 6.0 5.0 5.0 5.0 5.0 4.3 4.3 3.6 3.6 3.6 3.6 3.1 3.1 2.5 2.5 2.5 2.5 2.1 2.1 1.5 1.5 1.5 1.5 1.3 1.3 0.80 0.80 0.80 0.80 0.68 0.68 0.50 0.50 0.50 0.50 0.43 0.43 0.40 0.40 0.40 0.40 0.34 0.34 0.30 0.30 0.30 0.30 0.26 0.26 0.20 0.20 0.20 0.20 0.17 0.17 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 15.9 12.3 13.5 10.5 9.9 9.9 8.4 8.4 7.1 7.1 6.0 6.0 5.0 5.0 4.3 4.3 3.6 3.6 3.1 3.1 2.5 2.5 2.1 2.1 1.5 1.5 1.3 1.3 0.80 0.80 0.68 0.68 0.50 0.50 0.43 0.43 0.40 0.40 0.34 0.34 0.30 0.30 0.26 0.26 0.20 0.20 0.17 0.17 ... ... ... ... ... ... ... ... ... ... ... ... 141 ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni Wld. pipe SA–358 Smls. & wld. fittings SA–403 Bar SA–479 Bar SA–479 310S 310S 310S 310S S31008 S31008 S31008 S31008 1 ... ... ... ... ... ... ... 8 8 8 8 2 2 2 2 5 6 7 8 9 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni Wld. Wld. Wld. Wld. Bar SA–813 SA–813 SA–814 SA–814 SA/JIS G4303 TP310S TP310S TP310S TP310S SUS310S S31008 S31008 S31008 S31008 ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 2 2 2 2 2 10 11 12 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni Smls. tube Plate Plate SA–213 SA–240 SA–240 TP310H 310H 310H S31009 ... S31009 ... S31009 ... ... ... ... 8 8 8 2 2 2 13 14 15 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni Wld. tube Wld. tube Wld. tube SA–249 SA–249 SA–249 TP310H TP310H TP310H S31009 ... S31009 ... S31009 ... ... ... ... 8 8 8 2 2 2 16 17 18 19 20 21 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni 25Cr–20Ni Smls. pipe Smls. pipe Wld. pipe Wld. pipe Bar Bar SA–312 SA–312 SA–312 SA–312 SA–479 SA–479 TP310H TP310H TP310H TP310H 310H 310H S31009 S31009 S31009 S31009 S31009 S31009 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 2 2 2 2 2 2 22 23 24 25 26 27 25Cr–20Ni–Cb 25Cr–20Ni–Cb 25Cr–20Ni–Cb 25Cr–20Ni–Cb 25Cr–20Ni–Cb 25Cr–20Ni–Cb Smls. tube Smls. tube Plate Plate Wld. tube Wld. tube SA–213 SA–213 SA–240 SA–240 SA–249 SA–249 TP310Cb TP310Cb 310Cb 310Cb TP310Cb TP310Cb S31040 S31040 S31040 S31040 S31040 S31040 ... ... ... ... ... ... ... ... ... ... ... ... 8 8 8 8 8 8 2 2 2 2 2 2 28 29 30 31 25Cr–20Ni–Cb 25Cr–20Ni–Cb 25Cr–20Ni–Cb 25Cr–20Ni–Cb Smls. & wld. pipe Smls. pipe Wld. pipe Wld. pipe SA–312 SA–312 SA–312 SA–312 TP310Cb TP310Cb TP310Cb TP310Cb S31040 S31040 S31040 S31040 ... ... ... ... ... ... ... ... 8 8 8 8 2 2 2 2 32 33 34 35 25Cr–20Ni–Cb 25Cr–20Ni–Cb 25Cr–20Ni–Cb 25Cr–20Ni–Cb Bar Bar Wld. pipe Wld. pipe SA–479 SA–479 SA–813 SA–813 310Cb 310Cb TP310Cb TP310Cb S31040 S31040 S31040 S31040 ... ... ... ... ... ... ... ... 8 8 8 8 2 2 2 2 36 37 38 39 25Cr–20Ni–Cb 25Cr–20Ni–Cb 25Cr–20Ni–Cb–N 25Cr–20Ni–Cb–N Wld. pipe Wld. pipe Smls. tube Smls. tube SA–814 SA–814 SA–213 SA–213 TP310Cb TP310Cb TP310HCbN TP310HCbN S31040 S31040 S31042 S31042 ... ... ... ... ... ... ... ... 8 8 8 8 2 2 3 3 40 41 42 43 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N Forgings Forgings Smls. tube Smls. tube SA–182 SA–182 SA–213 SA–213 F310MoLN F310MoLN TP310MoLN TP310MoLN S31050 S31050 S31050 S31050 ... ... ... ... ... ... 0.250 < t ≤ 1.250 0.250 < t ≤ 1.250 8 8 8 8 2 2 2 2 Line No. Nominal Composition Product Form pipe pipe pipe pipe Spec. No. 142 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 75 75 75 75 30 30 30 30 NP NP 1000 1000 800 800 NP 800 NP 1500 1000 1000 NP 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, W12 G5, G12, T5, W12, W14 G12, G22, T6 G5, G12, G22, T5 5 6 7 8 9 75 75 75 75 75 30 30 30 30 30 NP NP NP NP 1000 NP NP NP NP 800 1500 1500 1500 1500 1000 650 650 650 650 NP HA–2 HA–2 HA–2 HA–2 HA–2 G5, G12, G24, T5 G12, G24, T6 G5, G12, G24, T5 G12, G24, T6 G5, G12, G22, T5 10 11 12 75 75 75 30 30 30 1500 1500 1500 800 NP NP 1500 1500 1500 NP NP NP HA–2 HA–2 HA–2 G5, T6 G5, T6 T7 13 14 15 75 75 75 30 30 30 NP NP NP 800 NP NP NP 1500 1500 NP NP NP HA–2 HA–2 HA–2 G5, W12 G5, G12, G24, T6 G12, G24, T7 16 17 18 19 20 21 75 75 75 75 75 75 30 30 30 30 30 30 1500 1500 1500 1500 1500 1500 NP NP NP NP NP NP 1500 1500 1500 1500 1500 1500 NP NP NP NP NP NP HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, T7 G3, G3, G5, T7 22 23 24 25 26 27 75 75 75 75 75 75 30 30 30 30 30 30 NP NP NP NP NP NP NP NP NP NP NP NP 1500 1500 1500 1500 1500 1500 650 650 650 650 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5, G12, T5 G12, T6 G5, G12, T5 G12, T6 G5, G12, G24, T5 G12, G24, T6 28 29 30 31 75 75 75 75 30 30 30 30 NP NP NP NP 800 NP NP NP 1500 1500 1500 1500 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, T5, W12, W14 G12, T6 G5, G12, G24, T5 G12, G14, G24, T6 32 33 34 35 75 75 75 75 30 30 30 30 NP NP NP NP NP NP NP NP 1000 1000 1500 1500 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G12, G22, T5 G12, G22, T6 G5, G12, G24, T5 G12, G24, T6 36 37 38 39 75 75 95 95 30 30 43 43 NP NP 1350 1350 NP NP NP NP 1500 1500 NP NP 650 650 NP NP HA–2 HA–2 HA–2 HA–2 G5, G12, G24, T5 G12, G24, T6 G5, G12, S4, T8 G12, S4, T9 40 41 42 43 78 78 78 78 37 37 37 37 NP NP NP NP NP NP NP NP 600 600 900 900 600 600 650 650 HA–2 HA–2 HA–2 HA–2 G5 ... G5 ... 143 Notes T6 G5, G24, T6 G24, T7 T6 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 20.0 20.0 20.0 20.0 ... ... ... ... 20.0 20.0 17.6 20.0 ... ... ... ... 20.0 20.0 16.1 20.0 19.9 19.9 15.1 19.9 19.3 19.3 14.3 19.3 18.5 18.5 13.7 18.5 18.2 18.2 13.5 18.2 17.9 17.9 13.3 17.9 17.7 17.7 13.1 17.7 17.4 17.4 12.9 17.4 ... 17.2 12.7 17.2 ... 16.9 12.5 16.9 5 6 7 8 9 17.0 17.0 17.0 17.0 20.0 ... ... ... ... ... 17.0 15.0 17.0 15.0 20.0 ... ... ... ... ... 17.0 13.7 17.0 13.7 20.0 16.9 12.8 16.9 12.8 19.9 16.4 12.1 16.4 12.1 19.3 15.7 11.7 15.7 11.7 18.5 15.5 11.5 15.5 11.5 18.2 15.2 11.3 15.2 11.3 17.9 15.0 11.1 15.0 11.1 17.7 14.8 11.0 14.8 11.0 17.4 14.6 10.8 14.6 10.8 17.2 14.4 10.7 14.4 10.7 16.9 10 11 12 20.0 20.0 20.0 ... ... ... 20.0 20.0 17.6 ... ... ... 20.0 20.0 16.1 19.9 19.9 15.1 19.3 19.3 14.3 18.5 18.5 13.7 18.2 18.2 13.5 17.9 17.9 13.3 17.7 17.7 13.1 17.4 17.4 12.9 17.2 17.2 12.7 16.9 16.9 12.5 13 14 15 20.0 17.0 17.0 ... ... ... 20.0 17.0 15.0 ... ... ... 20.0 17.0 13.7 19.9 16.9 12.8 19.3 16.4 12.1 18.5 15.7 11.7 18.2 15.5 11.5 17.9 15.2 11.3 17.7 15.0 11.1 17.4 14.8 11.0 ... 14.6 10.8 ... 14.4 10.7 16 17 18 19 20 21 20.0 20.0 17.0 17.0 20.0 20.0 ... ... ... ... ... ... 20.0 17.6 17.0 15.0 20.0 17.6 ... ... ... ... ... ... 20.0 16.1 17.0 13.7 20.0 16.1 19.9 15.1 16.9 12.8 19.9 15.1 19.3 14.3 16.4 12.1 19.3 14.3 18.5 13.7 15.7 11.7 18.5 13.7 18.2 13.5 15.5 11.5 18.2 13.5 17.9 13.3 15.2 11.3 17.9 13.3 17.7 13.1 15.0 11.1 17.7 13.1 17.4 12.9 14.8 11.0 17.4 12.9 17.2 12.7 14.6 10.8 17.2 12.7 16.9 12.5 14.4 10.7 16.9 12.5 22 23 24 25 26 27 20.0 20.0 20.0 20.0 17.0 17.0 ... ... ... ... ... ... 20.0 17.6 20.0 17.6 17.0 15.0 ... ... ... ... ... ... 20.0 16.1 20.0 16.1 17.0 13.7 19.9 15.1 19.9 15.1 16.9 12.8 19.3 14.3 19.3 14.3 16.4 12.1 18.5 13.7 18.5 13.7 15.7 11.7 18.2 13.5 18.2 13.5 15.5 11.5 17.9 13.3 17.9 13.3 15.2 11.3 17.7 13.1 17.7 13.1 15.0 11.1 17.4 12.9 17.4 12.9 14.8 11.0 17.2 12.7 17.2 12.7 14.6 10.8 16.9 12.5 16.9 12.5 14.4 10.7 28 29 30 31 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 17.6 17.0 15.0 ... ... ... ... 20.0 16.1 17.0 13.7 19.9 15.1 16.9 12.8 19.3 14.3 16.4 12.1 18.5 13.7 15.7 11.7 18.2 13.5 15.5 11.5 17.9 13.3 15.2 11.3 17.7 13.1 15.0 11.1 17.4 12.9 14.8 11.0 17.2 12.7 14.6 10.8 16.9 12.5 14.4 10.7 32 33 34 35 20.0 20.0 17.0 17.0 ... ... ... ... 20.0 17.6 17.0 15.0 ... ... ... ... 20.0 16.1 17.0 13.7 19.9 15.1 16.9 12.8 19.3 14.3 16.4 12.1 18.5 13.7 15.7 11.7 18.2 13.5 15.5 11.5 17.9 13.3 15.2 11.3 17.7 13.1 15.0 11.1 17.4 12.9 14.8 11.0 17.2 12.7 14.6 10.8 16.9 12.5 14.4 10.7 36 37 38 39 17.0 17.0 27.1 27.1 ... ... ... ... 17.0 15.0 26.9 24.0 ... ... ... ... 17.0 13.7 25.4 21.7 16.9 12.8 24.6 20.2 16.4 12.1 24.2 19.2 15.7 11.7 24.0 18.5 15.5 11.5 23.9 18.3 15.2 11.3 23.8 18.1 15.0 11.1 23.7 17.8 14.8 11.0 23.6 17.6 14.6 10.8 23.4 17.4 14.4 10.7 23.1 17.1 40 41 42 43 22.3 22.3 22.3 22.3 ... ... ... ... 22.0 21.0 22.0 21.0 ... ... ... ... 20.8 19.1 20.8 19.1 20.0 17.8 20.0 17.8 19.5 16.8 19.5 16.8 19.0 15.9 19.0 15.9 ... ... 18.8 15.5 ... ... 18.7 15.1 ... ... 18.5 14.8 ... ... 18.4 14.4 ... ... 18.2 14.0 ... ... 17.9 13.7 144 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... 15.9 12.3 15.9 ... 9.9 9.9 9.9 ... 7.1 ... ... ... 5.0 ... ... ... 3.6 ... ... ... 2.5 ... ... ... 1.5 ... ... ... 0.80 ... ... ... 0.50 ... ... ... 0.40 ... ... ... 0.30 ... ... ... 0.20 ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 9 13.5 10.5 13.5 10.5 15.9 8.4 8.4 8.4 8.4 9.9 6.0 6.0 6.0 6.0 ... 4.3 4.3 4.3 4.3 ... 3.1 3.1 3.1 3.1 ... 2.1 2.1 2.1 2.1 ... 1.3 1.3 1.3 1.3 ... 0.68 0.68 0.68 0.68 ... 0.43 0.43 0.43 0.43 ... 0.34 0.34 0.34 0.34 ... 0.26 0.26 0.26 0.26 ... 0.17 0.17 0.17 0.17 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 16.7 16.7 12.3 13.8 13.8 12.1 10.3 10.3 10.3 7.6 7.6 7.6 5.5 5.5 5.5 4.0 4.0 4.0 3.0 3.0 3.0 2.2 2.2 2.2 1.7 1.7 1.7 1.3 1.3 1.3 0.97 0.97 0.97 0.75 0.75 0.75 ... ... ... ... ... ... ... ... ... 13 14 15 ... 14.2 10.5 ... 11.7 10.3 ... 8.8 8.8 ... 6.5 6.5 ... 4.7 4.7 ... 3.4 3.4 ... 2.6 2.6 ... 1.9 1.9 ... 1.4 1.4 ... 1.1 1.1 ... 0.82 0.82 ... 0.64 0.64 ... ... ... ... ... ... ... ... ... 16 17 18 19 20 21 16.7 12.3 14.2 10.5 16.7 12.3 13.8 12.1 11.7 10.3 13.8 12.1 10.3 10.3 8.8 8.8 10.3 10.3 7.6 7.6 6.5 6.5 7.6 7.6 5.5 5.5 4.7 4.7 5.5 5.5 4.0 4.0 3.4 3.4 4.0 4.0 3.0 3.0 2.6 2.6 3.0 3.0 2.2 2.2 1.9 1.9 2.2 2.2 1.7 1.7 1.4 1.4 1.7 1.7 1.3 1.3 1.1 1.1 1.3 1.3 0.97 0.97 0.82 0.82 0.97 0.97 0.75 0.75 0.64 0.64 0.75 0.75 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 26 27 15.9 12.3 15.9 12.3 13.5 10.5 9.9 9.9 9.9 9.9 8.4 8.4 7.1 7.1 7.1 7.1 6.0 6.0 5.0 5.0 5.0 5.0 4.3 4.3 3.6 3.6 3.6 3.6 3.1 3.1 2.5 2.5 2.5 2.5 2.1 2.1 1.5 1.5 1.5 1.5 1.3 1.3 0.80 0.80 0.80 0.80 0.68 0.68 0.50 0.50 0.50 0.50 0.43 0.43 0.40 0.40 0.40 0.40 0.34 0.34 0.30 0.30 0.30 0.30 0.26 0.26 0.20 0.20 0.20 0.20 0.17 0.17 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 31 15.9 12.3 13.5 10.5 9.9 9.9 8.4 8.4 7.1 7.1 6.0 6.0 5.0 5.0 4.3 4.3 3.6 3.6 3.1 3.1 2.5 2.5 2.1 2.1 1.5 1.5 1.3 1.3 0.80 0.80 0.68 0.68 0.50 0.50 0.43 0.43 0.40 0.40 0.34 0.34 0.30 0.30 0.26 0.26 0.20 0.20 0.17 0.17 ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 15.9 12.3 13.5 10.5 9.9 9.9 8.4 8.4 ... ... 6.0 6.0 ... ... 4.3 4.3 ... ... 3.1 3.1 ... ... 2.1 2.1 ... ... 1.3 1.3 ... ... 0.68 0.68 ... ... 0.43 0.43 ... ... 0.34 0.34 ... ... 0.26 0.26 ... ... 0.17 0.17 ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 13.5 10.5 22.8 16.9 8.4 8.4 22.4 16.6 6.0 6.0 22.0 16.3 4.3 4.3 18.4 16.1 3.1 3.1 13.6 13.6 2.1 2.1 10.1 10.1 1.3 1.3 7.6 7.6 0.68 0.68 5.7 5.7 0.43 0.43 4.3 4.3 0.34 0.34 ... ... 0.26 0.26 ... ... 0.17 0.17 ... ... ... ... ... ... ... ... ... ... ... ... ... ... 40 41 42 43 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 145 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) 1 2 3 4 5 6 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N Plate Plate Wld. tube Wld. tube Wld. pipe Wld. pipe SA–240 SA–240 SA–249 SA–249 SA–312 SA–312 310MoLN 310MoLN TP310MoLN TP310MoLN TP310MoLN TP310MoLN S31050 S31050 S31050 S31050 S31050 S31050 ... ... ... ... ... ... t > 0.250 t > 0.250 0.250 < t 0.250 < t 0.250 < t 0.250 < t 7 8 9 10 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N Smls. tube Smls. tube Plate Plate SA–213 SA–213 SA–240 SA–240 TP310MoLN TP310MoLN 310MoLN 310MoLN S31050 S31050 S31050 S31050 ... ... ... ... 11 12 13 14 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N 25Cr–22Ni–2Mo–N Wld. Wld. Wld. Wld. tube tube pipe pipe SA–249 SA–249 SA–312 SA–312 TP310MoLN TP310MoLN TP310MoLN TP310MoLN S31050 S31050 S31050 S31050 15 16 17 18 19 26Cr–4Ni–Mo 26Cr–4Ni–Mo 26Cr–4Ni–Mo 26Cr–4Ni–Mo 26Cr–4Ni–Mo Plate Wld. tube Smls. tube Wld. pipe Smls. pipe SA–240 SA–789 SA–789 SA–790 SA–790 329 ... ... ... ... 20 21 22 23 24 26Cr–4Ni–Mo–N 26Cr–4Ni–Mo–N 26Cr–4Ni–Mo–N 26Cr–4Ni–Mo–N 26Cr–4Ni–Mo–N Plate Wld. tube Smls. tube Wld. pipe Smls. pipe SA–240 SA–789 SA–789 SA–790 SA–790 25 26 27 28 29Cr–6.5Ni–2Mo–N 29Cr–6.5Ni–2Mo–N 29Cr–6.5Ni–2Mo–N 29Cr–6.5Ni–2Mo–N Plate, sheet, strip Bar Smls. tube Smls. pipe 29 30 31 29Cr–6.5Ni–2Mo–N 29Cr–6.5Ni–2Mo–N 29Cr–6.5Ni–2Mo–N Plate, sheet, strip Smls. tube Smls. pipe Line No. Nominal Composition Product Form Spec. No. 8 8 8 8 8 8 2 2 2 2 2 2 ≤0.250, wall ≤0.250, wall t ≤ 0.250 t ≤ 0.250 8 8 8 8 2 2 2 2 ... ... ... ... ≤0.250, ≤0.250, ≤0.250, ≤0.250, 8 8 8 8 2 2 2 2 S32900 S32900 S32900 S32900 S32900 ... ... ... ... ... ... ... ... ... ... 10H 10H 10H 10H 10H 1 1 1 1 1 ... ... ... ... ... S32950 S32950 S32950 S32950 S32950 ... ... ... ... ... ... ... ... ... ... 10H 10H 10H 10H 10H 1 1 1 1 1 SA–240 SA–479 SA–789 SA–790 ... ... ... ... S32906 S32906 S32906 S32906 ... ... ... ... ≥0.40 ... ≥0.40 ≥0.40 10H 10H 10H 10H 1 1 1 1 SA–240 SA–789 SA–790 ... ... ... S32906 ... S32906 ... S32906 ... <0.40 <0.40 <0.40 10H 10H 10H 1 1 1 146 ≤ ≤ ≤ ≤ 1.250 1.250 1.250 1.250 wall wall wall wall This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Type/Grade Alloy Desig./ Class/ UNS Condition/ Size/Thickness, Group No. Temper in. P-No. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Tensile Line Strength, No. ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) External Pressure Chart No. III VIII-1 XII 78 78 78 78 78 78 37 37 37 37 37 37 NP NP NP NP NP NP NP NP NP NP NP NP 600 600 900 900 900 900 600 600 650 650 650 650 HA–2 HA–2 HA–2 HA–2 HA–2 HA–2 G5 ... G5, G24 G24 G5, G24 G24 7 8 9 10 84 84 84 84 39 39 39 39 NP NP NP NP NP NP NP NP 900 900 600 600 650 650 600 600 HA–2 HA–2 HA–2 HA–2 G5 ... G5 ... 11 12 13 14 84 84 84 84 39 39 39 39 NP NP NP NP NP NP NP NP 900 900 900 900 650 650 650 650 HA–2 HA–2 HA–2 HA–2 G5, G24 G24 G5, G24 G24 15 16 17 18 19 90 90 90 90 90 70 70 70 70 70 NP NP NP NP NP NP NP NP NP NP 500 500 500 500 500 500 500 500 500 500 HA–5 HA–5 HA–5 HA–5 HA–5 G19 G19, G24 G19 G19, G24 G19 20 21 22 23 24 100 100 100 100 100 70 70 70 70 70 NP NP NP NP NP NP NP NP NP NP 600 600 600 600 600 600 600 600 600 600 HA–5 HA–5 HA–5 HA–5 HA–5 G19 G19, G24 G19 G19, G24 G19 25 26 27 28 109 109 109 109 80 80 80 80 NP NP NP NP NP NP NP NP 600 600 600 600 600 600 600 600 HA–5 HA–5 HA–5 HA–5 G19 G19 G19 G19 29 30 31 116 116 116 94 94 94 NP NP NP NP NP NP 600 600 600 600 600 600 HA–5 HA–5 HA–5 G19 G19 G19 147 Notes This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 200 250 300 400 500 600 650 700 750 800 850 900 22.3 22.3 18.9 18.9 18.9 18.9 ... ... ... ... ... ... 22.0 21.0 18.7 17.8 18.7 17.8 ... ... ... ... ... ... 20.8 19.1 17.7 16.2 17.7 16.2 20.0 17.8 17.0 15.1 17.0 15.1 19.5 16.8 16.5 14.3 16.5 14.3 19.0 15.9 16.2 13.5 16.2 13.5 ... ... 16.0 13.2 16.0 13.2 ... ... 15.9 12.9 15.9 12.9 ... ... 15.8 12.5 15.8 12.5 ... ... 15.6 12.2 15.6 12.2 ... ... 15.5 11.9 15.5 11.9 ... ... 15.2 11.7 15.2 11.7 7 8 9 10 24.0 24.0 24.0 24.0 ... ... ... ... 23.7 22.1 23.7 22.1 ... ... ... ... 22.4 20.1 22.4 20.1 21.6 18.7 21.6 18.7 21.0 17.7 21.0 17.7 20.5 16.8 20.5 16.8 20.3 16.4 ... ... 20.1 16.0 ... ... 20.0 15.6 ... ... 19.8 15.2 ... ... 19.6 14.8 ... ... 19.3 14.5 ... ... 11 12 13 14 20.4 20.4 20.4 20.4 ... ... ... ... 20.2 18.8 20.2 18.8 ... ... ... ... 19.1 17.1 19.1 17.1 18.3 15.9 18.3 15.9 17.8 15.0 17.8 15.0 17.4 14.3 17.4 14.3 17.3 13.9 17.3 13.9 17.1 13.6 17.1 13.6 17.0 13.2 17.0 13.2 16.8 12.9 16.8 12.9 16.6 12.6 16.6 12.6 16.4 12.3 16.4 12.3 15 16 17 18 19 25.7 21.9 25.7 21.9 25.7 ... ... ... ... ... 25.7 21.9 25.7 21.9 25.7 ... ... ... ... ... 24.8 21.0 24.8 21.0 24.8 24.3 20.6 24.3 20.6 24.3 24.3 20.6 24.3 20.6 24.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 24 28.6 24.3 28.6 24.3 28.6 ... ... ... ... ... 28.5 24.2 28.5 24.2 28.5 ... ... ... ... ... 27.0 23.0 27.0 23.0 27.0 26.4 22.5 26.4 22.5 26.4 26.4 22.5 26.4 22.5 26.4 26.4 22.5 26.4 22.5 26.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 31.1 31.1 31.1 31.1 ... ... ... ... 31.1 31.1 31.1 31.1 ... ... ... ... 29.6 29.6 29.6 29.6 28.7 28.7 28.7 28.7 28.3 28.3 28.3 28.3 28.3 28.3 28.3 28.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 33.1 33.1 33.1 ... ... ... 33.1 33.1 33.1 ... ... ... 31.5 31.5 31.5 30.6 30.6 30.6 30.1 30.1 30.1 30.1 30.1 30.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 148 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 150 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1A (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Ferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 950 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 24 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 149 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1000 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu ð15Þ ð15Þ NOTES TO TABLE 1A GENERAL NOTES (a) The following abbreviations are used: Norm. rld., Normalized rolled; NT, Normalized and tempered; QT, Quenched and tempered; Smls., Seamless; Sol. ann., Solution annealed; and Wld., Welded. (b) The stress values in this Table may be interpolated to determine values for intermediate temperatures. The values at intermediate temperatures shall be rounded to the same number of decimal places as the value at the higher temperature between which values are being interpolated. The rounding rule is: when the next digit beyond the last place to be retained is less than 5, retain unchanged the digit in the last place retained; when the digit next beyond the last place to be retained is 5 or greater, increase by 1 the digit in the last place retained. (c) For Section VIII and XII applications, stress values in restricted shear such as dowel bolts or similar construction in which the shearing member is so restricted that the section under consideration would fail without reduction of area shall be 0.80 times the values in the above Table. (d) For Section VIII and XII applications, stress values in bearing shall be 1.60 times the values in the above Table. (e) Stress values for −20°F to 100°F are applicable for colder temperatures when the toughness requirements of Section III, VIII, or XII are met. (f) An alternative typeface is used for stress values obtained from time–dependent properties (see Notes T1 through T12). (g) Where specifications, grades, classes, and types are listed in this Table, and where the material specification in Section II, Part A or Part B is a dual–unit specification (e.g., SA–516/SA–516M), the values listed in this Table shall be applicable to either the customary U.S. version of the material specification or the SI units version of the material specification. For example, the values listed for SA–516 Grade 70 shall be used when SA–516M Grade 485 is used in construction. (h) The properties of steels are influenced by the processing history, heat treatment, melting practice, and level of residual elements. See Nonmandatory Appendix A for more information. (i) Where a size limit appears in the Size/Thickness column, the limit applies to the dimension appropriate to the product form: wall thickness of tubing, pipe, pipe fittings, and hollow forgings; thickness of plate, flat bar and forgings, and polygonal bar; diameter of solid bar and bolting; and thickest cross–section of other pressure parts, e.g., castings and forgings. 150 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. NOTES – GENERAL REQUIREMENTS G1 To these stress values a casting quality factor as specified in PG–25 of Section I; UG–24 of Section VIII, Division 1; or TM–190 of Section XII shall be applied. G2 These stress values include a joint efficiency factor of 0.60. G3 These stress values include a joint efficiency factor of 0.85. G4 For Section I applications, these stresses apply when used for boiler, water wall, superheater, and economizer tubes that are enclosed within a setting. A joint efficiency factor of 0.85 is included in values above 850°F. G5 Due to the relatively low yield strength of these materials, these higher stress values were established at temperatures where the short– time tensile properties govern to permit the use of these alloys where slightly greater deformation is acceptable. The stress values in this range exceed 662/3% but do not exceed 90% of the yield strength at temperature. Use of these stresses may result in dimensional changes due to permanent strain. These stress values are not recommended for the flanges of gasketed joints or other applications where slight amounts of distortion can cause leakage or malfunction. For Section III applications, Table Y–2 lists multiplying factors that, when applied to the yield strength values shown in Table Y–1, will give allowable stress values that will result in lower levels of permanent strain. G6 Creep–fatigue, thermal ratcheting, and environmental effects are increasingly significant failure modes at temperatures in excess of 1500°F and shall be considered in the design. G7 For Section VIII applications, these stress values are based on expected minimum values of 45,000 psi tensile strength and yield strength of 20,000 psi resulting from loss of strength due to thermal treatment required for the glass coating operation. UG–85 does not apply. G8 These stress values are established from a consideration of strength only and will be satisfactory for average service. For bolted joints where freedom from leakage over a long period of time without retightening is required, lower stress values may be necessary as determined from the flexibility of the flange and bolts and corresponding relaxation properties. G9 For Section III applications, the use of these materials shall be limited to materials for tanks covered in Subsections NC and ND, component supports, and for nonpressure–retaining attachments (NC/ND–2190). G10 Upon prolonged exposure to temperatures above 800°F, the carbide phase of carbon steel may be converted to graphite. See Nonmandatory Appendix A, A–201 and A–202. G11 Upon prolonged exposure to temperatures above 875°F, the carbide phase of carbon–molybdenum steel may be converted to graphite. See Nonmandatory Appendix A, A–201 and A–202. G12 At temperatures above 1000°F, these stress values apply only when the carbon is 0.04% or higher on heat analysis. G13 These stress values at 1050°F and above shall be used only when the grain size is ASTM No. 6 or coarser. G14 These stress values shall be used when the grain size is not determined or is determined to be finer than ASTM No. 6. G15 For Section I applications, use is limited to stays as defined in PG–13 except as permitted by PG–11. G16 For Section III Class 3 applications, these S values do not include a casting quality factor. Statically and centrifugally cast products meeting the requirements of NC–2570 shall receive a casting quality factor of 1.00. G17 For Section III Class 3 applications, statically and centrifugally cast products meeting the requirements of NC–2571(a) and (b), and cast pipe fittings, pumps, and valves with inlet piping connections of 2 in. nominal pipe size and less, shall receive a casting quality factor of 1.00. Other casting quality factors shall be in accordance with the following: (a) for visual examination, 0.80; (b) for magnetic particle examination, 0.85; (c) for liquid penetrant examination, 0.85; Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu NOTES TO TABLE 1A (CONT'D) NOTES – GENERAL REQUIREMENTS (CONT'D) (d) for radiography, 1.00; (e) for ultrasonic examination, 1.00; (f) for magnetic particle or liquid penetrant plus ultrasonic examination or radiography, 1.00. G18 See Table Y–1 for yield strength values as a function of thickness over this range. Allowable stresses are independent of yield strength in this thickness range. G19 This steel may be expected to develop embrittlement after service at moderately elevated temperature; see Nonmandatory Appendix A, A–207 and A–208. G20 These stresses are based on weld metal properties. G21 For Section I, use is limited to PEB–5.3. See PG–5.5 for cautionary note. G22 For Section I applications, use of external pressure charts for material in the form of bar stock is permitted for stiffening rings only. G23 For temperatures above the maximum temperature shown on the external pressure chart for this material, Fig. CS–2 may be used for the design using this material. G24 A factor of 0.85 has been applied in arriving at the maximum allowable stress values in tension for this material. Divide tabulated values by 0.85 for maximum allowable longitudinal tensile stress. G25 For Section III applications, for both Class 2 and Class 3, the completed vessel after final heat treatment shall be examined by the ultrasonic method in accordance with NB–2542 except that angle beam examination in both the circumferential and the axial directions may be performed in lieu of the straight beam examination in the axial direction. The tensile strength shall not exceed 125,000 psi. G26 Material that conforms to Class 10, 11, or 12 is not permitted. G27 Material that conforms to Class 11 or 12 is not permitted. G28 Supplementary Requirement S15 of SA–781, Alternate Mechanical Test Coupons and Specimen Locations for Castings, is mandatory. G29 For Section III applications, impact testing in accordance with the requirements of NC–2300 is required for Class 2 components and in accordance with ND–2300 for Class 3 components. NOTES – HEAT TREATMENT REQUIREMENTS H1 For temperatures above 1000°F, these stress values may be used only if the material is heat treated by heating to the minimum temperature specified in the material specification, but not lower than 1900°F, and quenching in water or rapidly cooling by other means. H2 For temperatures above 1000°F, these stress values may be used only if the material is heat treated by heating to a minimum temperature of 2000°F, and quenching in water or rapidly cooling by other means. H3 Normalized and tempered. H4 Solution treated and quenched. H5 For Section III applications, if heat treatment is performed after forming or fabrication, it shall be performed at 1500°F to 1850°F for a period of time not to exceed 10 min at temperature, followed by rapid cooling. H6 Material shall be solution annealed at 2010°F to 2140°F, followed by a rapid cooling in water or air. NOTES – TIME–DEPENDENT PROPERTIES [See General Note (f)] T1 Allowable stresses for temperatures of 700°F and above are values obtained from time–dependent properties. T2 Allowable stresses for temperatures of 750°F and above are values obtained from time–dependent properties. T3 Allowable stresses for temperatures of 850°F and above are values obtained from time–dependent properties. T4 Allowable stresses for temperatures of 900°F and above are values obtained from time–dependent properties. T5 Allowable stresses for temperatures of 950°F and above are values obtained from time–dependent properties. T6 Allowable stresses for temperatures of 1000°F and above are values obtained from time–dependent properties. T7 Allowable stresses for temperatures of 1050°F and above are values obtained from time–dependent properties. T8 Allowable stresses for temperatures of 1100°F and above are values obtained from time–dependent properties. T9 Allowable stresses for temperatures of 1150°F and above are values obtained from time–dependent properties. T10 Allowable stresses for temperatures of 800°F and above are values obtained from time–dependent properties. T11 Allowable stresses for temperatures of 650°F and above are values obtained from time–dependent properties. 151 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. ð15Þ NOTES – SIZE REQUIREMENTS S1 For Section I applications, stress values at temperatures of 850°F and above are permissible but, except for tubular products 3 in. O.D. or less enclosed within the boiler setting, use of these materials at these temperatures is not current practice. S2 For Section I applications, stress values at temperatures of 900°F and above are permissible but, except for tubular products 3 in. O.D. or less enclosed within the boiler setting, use of these materials at these temperatures is not current practice. S3 For Section I applications, stress values at temperatures of 1000°F and above are permissible but, except for tubular products 3 in. O.D. or less enclosed within the boiler setting, use of these materials at these temperatures is not current practice. S4 For Section I applications, stress values at temperatures of 1150°F and above are permissible but, except for tubular products 3 in. O.D. or less enclosed within the boiler setting, use of these materials at these temperatures is not current practice. S5 Material that conforms to Class 10, 11, or 12 is not permitted when the nominal thickness of the material exceeds ¾ in. S6 Material that conforms to Class 10, 11, or 12 is not permitted when the nominal thickness of the material exceeds 1¼ in. S7 The maximum thickness of unheat–treated forgings shall not exceed 3¾ in. The maximum thickness as–heat–treated may be 4 in. S8 The maximum section thickness shall not exceed 3 in. for double–normalized–and–tempered forgings, or 5 in. for quenched–and– tempered forgings. S9 Both NPS 8 and larger, and schedule 140 and heavier. S10 The maximum pipe size shall be NPS 4 and the maximum thickness in any pipe size shall be Schedule 80. S11 Either NPS 8 and larger and less than schedule 140 wall, or less than NPS 8 and all wall thicknesses. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu ð15Þ NOTES TO TABLE 1A (CONT'D) NOTES – TIME–DEPENDENT PROPERTIES [See General Note (f)] (CONT'D) T12 Allowable stresses for temperatures of 1200°F and above are values obtained from time–dependent properties. 152 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. NOTES – WELDING REQUIREMENTS W1 Not for welded construction. W2 Not for welded construction in Section III. W3 Welded. W4 Nonwelded, or welded if the tensile strength of the Section IX reduced section tension test is not less than 100 ksi. W5 Welded, with the tensile strength of the Section IX reduced tension test less than 100 ksi but not less than 95 ksi. W6 This material may be welded by the resistance technique. W7 In welded construction for temperatures above 850°F, the weld metal shall have a carbon content of greater than 0.05%. W8 Welding and oxygen or other thermal cutting processes are not permitted when carbon content exceeds 0.35% by heat analysis. W9 For Section I applications, for pressure retaining welds in 2¼Cr–1Mo materials, other than circumferential butt welds less than or equal to 3½ in. in outside diameter, when the design metal temperatures exceed 850°F, the weld metal shall have a carbon content greater than 0.05%. W10 For Section III applications, material that conforms to Class 10, 13, 20, 23, 30, 33, 40, 43, 50, or 53 is not permitted for Class 2 and Class 3 construction when a weld efficiency factor of 1.00 is used in accordance with Note W12. W11 For Section VIII applications, Section IX, QW–250 Variables QW–404.12, QW–406.3, QW–407.2, and QW–409.1 shall also apply to this material. These variables shall be applied in accordance with the rules for welding of Part UF. W12 These S values do not include a longitudinal weld efficiency factor. For Section III applications, for materials welded without filler metal, ultrasonic examination, radiographic examination, or eddy current examination, in accordance with NC–2550, shall provide a longitudinal weld efficiency factor of 1.00. Materials welded with filler metal meeting the requirements of NC–2560 shall receive a longitudinal weld efficiency factor of 1.00. Other longitudinal weld efficiency factors shall be in accordance with the following: (a) for single butt weld, with filler metal, 0.80; (b) for single or double butt weld, without filler metal, 0.85; (c) for double butt weld, with filler metal, 0.90; (d) for single or double butt weld, with radiography, 1.00. W13 For Section I applications, electric resistance and autogenous welded tubing may be used with these stresses, provided the following additional restrictions and requirements are met: (a) The tubing shall be used for boiler, waterwall, superheater, and economizer tubes that are enclosed within the setting. (b) The maximum outside diameter shall be 3½ in. (c) The weld seam of each tube shall be subjected to an angle beam ultrasonic inspection per SA–450. (d) A complete volumetric inspection of the entire length of each tube shall be performed in accordance with SA–450. (e) Material test reports shall be supplied. W14 These S values do not include a weld factor. For Section VIII, Division 1 and Section XII applications using welds made without filler metal, the tabulated tensile stress values shall be multiplied by 0.85. For welds made with filler metal, consult UW–12 for Section VIII, Division 1, or TW–130.4 for Section XII, as applicable. W15 The Nondestructive Electric Test requirements of SA–53 Type E pipe are required for all sizes. The pipe shall be additionally marked "NDE" and so noted on the material certification. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). INTENTIONALLY LEFT BLANK This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. No fu Table 1B Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... Alclad Alclad Alclad Alclad Alclad 3003 3003 3003 3003 3003 O O H112 H112 H112 6 7 8 9 ... ... ... ... Plate, Plate, Plate, Plate, sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 ... ... ... ... Alclad Alclad Alclad Alclad 3003 3003 3003 3003 H12 H12 H14 H14 10 11 12 13 ... ... ... ... Drawn Drawn Drawn Drawn SB–210 SB–210 SB–210 SB–210 ... ... ... ... Alclad Alclad Alclad Alclad 3003 3003 3003 3003 O H113 H14 H18 14 15 16 17 ... ... ... ... Cond. & heat exch. tubes Cond. & heat exch. tubes Smls. extr. tube Smls. extr. tube SB–234 SB–234 SB–241 SB–241 ... ... ... ... Alclad Alclad Alclad Alclad 3003 3003 3003 3003 H14 H25 O H112 18 19 20 21 ... ... ... ... Plate, Plate, Plate, Plate, sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 ... ... ... ... Alclad Alclad Alclad Alclad 3004 3004 3004 3004 O O H112 H112 22 23 24 25 ... ... ... ... Plate, Plate, Plate, Plate, sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 ... ... ... ... Alclad Alclad Alclad Alclad 3004 3004 3004 3004 H32 H32 H34 H34 ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 26 27 28 29 30 ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... Alclad Alclad Alclad Alclad Alclad 6061 6061 6061 6061 6061 T4 T451 T451 T4 wld. T451 wld. ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 31 32 33 34 35 36 ... ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... ... Alclad Alclad Alclad Alclad Alclad Alclad 6061 6061 6061 6061 6061 6061 T6 T651 T651 T651 T6 wld. T651 wld. 37 38 39 40 41 42 ... ... ... ... ... ... Castings Castings Castings Castings Castings Castings SB–26 SB–108 SB–26 SB–26 SB–108 SB–26 ... ... ... ... ... ... A02040 A02040 A03560 A03560 A03560 A24430 smls. smls. smls. smls. tube tube tube tube 154 T4 T4 T71 T6 T6 F This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi 0.006–0.499 0.500–3.000 0.250–0.499 0.500–2.000 2.001–3.000 21 21 21 21 21 13 14 16 15 14.5 4.5 5 9 6 6 6 7 8 9 0.017–0.499 0.500–2.000 0.009–0.499 0.500–1.000 21 21 21 21 16 17 19 20 10 11 12 13 0.010–0.500 0.050–0.500 0.010–0.500 0.010–0.500 21 21 21 21 14 15 16 17 0.010–0.200 0.010–0.200 ... ... 18 19 20 21 Line No. Size/ Thickness, in. 1 2 3 4 5 Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes 250 250 300 200 200 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 NFA–7 NFA–7 NFA–7 NFA–7 NFA–7 G16 G25 G16, W3 G26, W3 G26, W3 11 12 16 17 NP NP NP NP 300 300 250 250 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–7 NFA–7 NFA–7 NFA–7 G16, G25, G16, G25, 13 13 19 26 4.5 4.5 16 23 NP NP NP NP 250 250 250 250 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–7 NFA–7 NFA–1 NFA–1 G16 G16, W3 G16, W3 G16, W3 21 21 21 21 19 21 13 13 16 18 4.5 4.5 NP NP NP NP 250 250 250 250 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–1 NFA–1 NFA–7 NFA–7 G16, W4 G16, W4 G16 G16, W3 0.051–0.499 0.500–3.000 0.250–0.499 0.500–3.000 22 22 22 22 21 22 22 23 8 8.5 8.5 9 NP NP NP NP 300 300 300 300 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–7 NFA–7 NFA–7 NFA–7 G16 G25 G16, W3 G25, W3 22 23 24 25 0.051–0.499 0.500–2.000 0.051–0.499 0.500–1.000 22 22 22 22 27 28 31 32 20 21 24 25 NP NP NP NP 250 250 250 250 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–7 NFA–7 NFA–7 NFA–7 G16, G25, G16, G25, W3 W3 W3 W3 26 27 28 29 30 0.010–0.249 0.250–0.499 0.500–3.000 0.010–0.249 0.250–3.000 23 23 23 23 23 27 27 30 24 24 14 14 16 ... ... NP NP NP NP NP 400 400 400 400 400 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 NFA–12 NFA–12 NFA–12 NFA–12 NFA–12 G16, G16, G24, G24, G24, G24, W4 G24, W4 G25, W4 W7 W7 31 32 33 34 35 36 0.010–0.249 0.250–0.499 0.500–4.000 4.001–5.000 0.010–0.249 0.250–5.000 23 23 23 23 23 23 38 38 42 40 24 24 32 32 35 35 ... ... NP NP NP NP NP NP 400 400 400 400 400 400 (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 only) only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 400 400 NFA–12 NFA–12 NFA–12 NFA–12 NFA–12 NFA–12 G16, G16, G24, G24, G24, G24, G24, G24, G25, G26, W7 W7 37 38 39 40 41 42 ≤2.000 ≤2.000 ... ... ... ... ... ... ... ... ... ... 45 48 25 30 33 17 28 29 18 20 22 6 NP NP NP NP NP NP NP NP 350 (Cl. 3 only) 250 (Cl. 3 only) NP 400 (Cl. 3 only) 150 150 400 250 250 400 150 150 400 250 250 400 NFA–12 NFA–12 NFA–1 NFA–12 NFA–12 NFA–1 G15, G15, G15, G15, G15, G15, W4 W4 W4 W4 W4 W4 155 W3 W3 W3 W3 W4 W4 W4 W4 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. NP NP NP NP NP Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 3.0 3.0 4.3 3.9 3.8 3.0 3.0 4.3 3.9 3.8 3.0 3.0 4.3 3.9 3.7 2.7 2.7 3.8 3.0 2.9 2.2 2.2 3.3 2.2 2.2 1.6 1.6 2.7 1.6 1.6 1.3 1.3 2.1 1.3 1.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 4.3 4.3 5.1 5.1 4.3 4.3 5.1 5.1 4.3 4.3 5.1 5.1 3.8 3.8 4.5 4.5 3.3 3.3 3.9 3.9 2.7 2.7 2.7 2.7 2.1 2.1 2.1 2.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 3.0 3.0 5.1 7.0 3.0 3.0 5.1 7.0 3.0 3.0 5.1 6.9 2.7 2.7 4.5 5.8 2.2 2.2 3.9 4.8 1.6 1.6 2.7 3.2 1.3 1.3 2.1 2.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 17 5.1 5.7 3.0 3.0 5.1 5.7 3.0 3.0 5.1 5.7 3.0 3.0 4.5 4.8 2.7 2.7 3.9 3.9 2.2 2.2 2.7 2.7 1.6 1.6 2.1 2.1 1.2 1.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 18 19 20 21 5.0 5.0 5.2 5.9 5.0 5.0 5.2 5.9 5.0 5.0 5.2 5.9 5.0 5.0 5.2 5.3 4.5 4.5 4.6 4.6 3.4 3.4 3.4 3.4 2.1 2.1 2.1 2.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 7.2 7.2 8.2 8.2 7.2 7.2 8.2 8.2 7.2 7.2 8.2 8.2 6.2 6.2 6.7 6.7 5.2 5.2 5.2 5.2 3.4 3.4 3.4 3.4 2.1 2.1 2.1 2.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 26 27 28 29 30 7.7 7.7 8.6 6.9 6.9 7.7 7.7 8.6 6.9 6.9 7.7 7.7 8.6 6.9 6.9 7.6 7.6 8.5 6.8 6.8 6.2 6.2 6.2 5.5 5.5 5.7 5.7 5.7 4.6 4.6 4.0 4.0 4.0 3.5 3.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 35 36 10.9 10.9 12.0 11.4 6.9 6.9 10.9 10.9 12.0 11.4 6.9 6.9 10.9 10.9 12.0 11.4 6.9 6.9 10.6 10.6 11.7 11.1 6.8 6.8 7.6 7.6 7.6 7.4 5.5 5.5 5.7 5.7 5.7 5.7 4.6 4.6 4.0 4.0 4.0 4.0 3.5 3.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 41 42 8.4 10.3 7.2 8.6 9.5 4.0 7.1 8.6 7.2 8.6 9.3 4.0 ... ... 7.2 8.6 8.5 4.0 ... ... 6.3 6.3 6.4 3.8 ... ... 5.4 ... ... 3.5 ... ... 4.1 ... ... 3.1 ... ... 2.4 ... ... 2.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 156 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 Table 1B Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 17 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 18 19 20 21 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 26 27 28 29 30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 31 32 33 34 35 36 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 37 38 39 40 41 42 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 157 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper ... ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... ... A91060 A91060 A91060 A91060 A91060 A91060 O H112 H112 H112 H12 H14 7 8 9 ... ... ... Drawn smls. tube Drawn smls. tube Drawn smls. tube SB–210 SB–210 SB–210 ... ... ... A91060 A91060 A91060 O H14 H113 10 11 12 13 14 ... ... ... ... ... Bar, rod, shapes Bar, rod, shapes Cond. & heat exch. tubes Smls. extr. tube Smls. extr. tube SB–221 SB–221 SB–234 SB–241 SB–241 ... ... ... ... ... A91060 A91060 A91060 A91060 A91060 O H112 H14 O H112 15 16 17 18 19 20 ... ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, Plate, SB–209 SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... ... A91100 A91100 A91100 A91100 A91100 A91100 O H112 H112 H112 H12 H14 21 22 23 24 ... ... ... ... Bar, rod, shapes Bar, rod, shapes Smls. extr. tube Smls. extr. tube SB–221 SB–221 SB–241 SB–241 ... ... ... ... A91100 A91100 A91100 A91100 O H112 O H112 25 26 27 ... ... ... Die forgings Die forgings Die forgings SB–247 SB–247 SB–247 ... ... ... A92014 A92014 A92014 T4 T6 T6 28 29 30 31 ... ... ... ... Bar, Bar, Bar, Bar, rod, rod, rod, rod, wire wire wire wire SB–211 SB–211 SB–211 SB–211 ... ... ... ... A92024 A92024 A92024 A92024 T4 T4 T4 T4 32 33 34 35 ... ... ... ... Bar, Bar, Bar, Bar, rod, rod, rod, rod, shapes shapes shapes shapes SB–221 SB–221 SB–221 SB–221 ... ... ... ... A92024 A92024 A92024 A92024 T3 T3 T3 T3 36 37 38 39 40 41 ... ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, Plate, SB–209 SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... ... A93003 A93003 A93003 A93003 A93003 A93003 O H112 H112 H112 H12 H14 sheet sheet sheet sheet sheet sheet sheet sheet sheet sheet sheet sheet 158 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) Min. Yield Strength, ksi 0.051–3.000 0.250–0.499 0.500–1.000 1.001–3.000 0.051–2.000 0.051–1.000 21 21 21 21 21 21 8 11 10 9 11 12 2.5 7 5 4 9 10 NP NP NP NP NP NP 300 300 300 250 300 300 7 8 9 0.018–0.500 0.018–0.500 0.018–0.500 21 ... 21 8.5 12 8.5 2.5 10 2.5 10 11 12 13 14 ... ... 0.010–0.200 ... ... 21 21 21 21 21 8.5 8.5 12 8.5 8.5 15 16 17 18 19 20 0.006–3.000 0.250–0.499 0.500–2.000 2.001–3.000 0.051–2.000 0.009–1.000 21 21 21 21 21 21 11 13 12 11.5 14 16 21 22 23 24 ... ... ... ... 21 21 21 21 25 26 27 ≤4.000 ≤2.000 2.001–4.000 28 29 30 31 Line No. VIII-1 XII External Pressure Chart No. 1 2 3 4 5 6 only) only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 400 400 NFA–7 NFA–7 NFA–7 NFA–7 NFA–7 NFA–7 T3 T3, T4, T3, T3, T3, NP NP NP 300 (Cl. 3 only) 300 (Cl. 3 only) 300 (Cl. 3 only) 400 400 400 400 400 400 NFA–7 NFA–7 NFA–7 T3 T3, W3 T3, W3 2.5 2.5 10 2.5 2.5 NP NP NP NP NP 300 300 300 300 300 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 NFA–7 NFA–7 NFA–7 NFA–7 NFA–7 G13, T3 G13, T3, W3 T3, W4 T3 T3, W3 3.5 7 5 4 11 14 NP NP NP NP NP NP 250 250 250 250 250 250 (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 only) only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 400 400 NFA–7 NFA–7 NFA–7 NFA–7 NFA–7 NFA–7 T4 T4, T4, T4, T4, T4, 11 11 11 11 3 3 3 3 NP NP NP NP 250 250 250 250 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–7 NFA–7 NFA–7 NFA–7 T4 T4, W3 T4 T4, W3 ... ... ... 55 65 63 30 56 54 NP NP NP 400 (Cl. 3 only) 400 (Cl. 3 only) 400 (Cl. 3 only) 400 400 400 400 400 400 NFA–6 NFA–6 NFA–6 T3, W4 T2, W4 T2, W4 0.125–0.499 0.500–4.500 4.501–6.500 6.501–8.000 ... ... ... ... 62 62 62 58 45 42 40 38 NP NP NP NP 400 400 400 400 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–6 NFA–6 NFA–6 NFA–6 T2, T2, T2, T2, 32 33 34 35 ≤0.249 0.250–0.749 0.750–1.499 ≥1.500 ... ... ... ... 57 60 65 68 42 44 46 48 NP NP NP NP 400 400 400 400 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–6 NFA–6 NFA–6 NFA–6 G24, G24, G24, G24, 36 37 38 39 40 41 0.006–3.000 0.250–0.499 0.500–2.000 2.001–3.000 0.017–2.000 0.009–1.000 21 21 21 21 21 21 14 17 15 14.5 17 20 5 10 6 6 12 17 NP NP NP NP NP NP 250 300 200 200 300 250 (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 only) only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 400 400 NFA–1 NFA–1 NFA–1 NFA–1 NFA–1 NFA–2 T3 T4, T3, T3, T4, T4, I III (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 159 Notes W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W4 W4 W4 W4 T2, T2, T2, T2, W3 W3 W3 W3 W3 W4 W4 W4 W4 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. P-No. Min. Tensile Strength, ksi Size/ Thickness, in. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1.7 3.2 2.9 2.6 3.2 3.4 1.7 3.0 2.7 2.4 3.2 3.4 1.6 2.4 2.2 1.9 2.6 3.4 1.5 2.1 1.9 1.7 2.3 3.0 1.3 1.8 1.7 1.5 2.1 2.6 1.1 1.6 1.4 1.1 1.8 1.8 0.80 1.0 1.0 0.80 1.1 1.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 1.7 3.4 1.7 1.7 3.4 1.7 1.6 3.4 1.6 1.5 3.0 1.5 1.3 2.6 1.3 1.1 1.8 1.1 0.80 1.2 0.80 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 14 1.7 1.7 3.4 1.7 1.7 1.7 1.7 3.4 1.7 1.7 1.6 1.6 3.4 1.6 1.6 1.5 1.5 3.0 1.5 1.4 1.3 1.3 2.6 1.3 1.2 1.1 1.1 1.8 1.1 1.0 0.80 0.80 1.2 0.80 0.80 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 19 20 2.3 3.7 3.3 2.7 4.0 4.6 2.3 3.7 3.3 2.7 4.0 4.6 2.3 3.7 3.3 2.7 4.0 4.6 2.3 2.7 2.5 2.4 3.2 3.7 1.8 2.4 2.2 1.8 2.8 2.8 1.4 1.7 1.7 1.4 2.0 2.0 1.0 1.0 1.0 1.0 1.2 1.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 24 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.8 1.8 1.8 1.8 1.4 1.4 1.4 1.4 1.0 1.0 1.0 1.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 15.7 18.6 18.0 15.7 18.6 18.0 13.3 18.6 18.0 12.5 14.8 14.3 11.5 11.5 11.5 6.8 6.8 6.8 3.9 3.9 3.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 31 17.7 17.7 17.7 16.6 17.7 17.7 17.7 16.6 17.7 17.7 17.7 16.6 13.7 13.7 13.7 12.8 10.4 10.4 10.4 9.7 6.5 6.5 6.5 6.1 4.5 4.5 4.5 4.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 16.3 17.1 18.6 19.4 16.3 17.1 18.6 19.4 16.3 17.1 18.6 19.4 12.6 13.2 14.3 15.0 9.5 10.0 10.8 11.3 6.0 6.3 6.8 7.1 4.2 4.4 4.7 5.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 40 41 3.4 4.9 3.8 3.6 4.9 5.7 3.4 4.9 3.8 3.6 4.9 5.7 3.4 4.9 3.7 3.5 4.9 5.7 3.0 4.0 3.2 3.2 4.0 4.9 2.4 3.6 2.4 2.4 3.6 4.3 1.8 3.0 1.8 1.8 3.0 3.0 1.4 2.4 1.4 1.4 2.4 2.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 160 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 14 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 19 20 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 24 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 31 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 40 41 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 161 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. SB–210 SB–210 SB–210 SB–210 SB–210 ... ... ... ... ... A93003 A93003 A93003 A93003 A93003 O H113 H12 H14 H18 ... ... ... ... ... Drawn Drawn Drawn Drawn Drawn tube tube tube tube tube 6 7 8 9 ... ... ... ... Bar, rod, shapes Bar, rod, shapes Cond. & heat exch. tubes Cond. & heat exch. tubes SB–221 SB–221 SB–234 SB–234 ... ... ... ... A93003 A93003 A93003 A93003 O H112 H14 H25 10 11 12 13 14 15 ... ... ... ... ... ... Smls. extr. tube Smls. extr. tube Smls. pipe Smls. pipe Die forgings Die forgings SB–241 SB–241 SB–241 SB–241 SB–247 SB–247 ... ... ... ... ... ... A93003 A93003 A93003 A93003 A93003 A93003 O H112 H112 H18 H112 H112 wld. 16 17 18 19 ... ... ... ... Plate, Plate, Plate, Plate, sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 ... ... ... ... A93004 A93004 A93004 A93004 O H112 H32 H34 ð15Þ ð15Þ 20 21 22 23 24 ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... A95052 A95052 A95052 A95052 A95052 O H112 H112 H32 H34 ð15Þ ð15Þ ð15Þ 25 26 27 ... ... ... Drawn smls. tube Drawn smls. tube Drawn smls. tube SB–210 SB–210 SB–210 ... ... ... A95052 A95052 A95052 O H32 H34 ð15Þ ð15Þ ð15Þ 28 29 30 ... ... ... Cond. & heat exch. tubes Cond. & heat exch. tubes Smls. extr. tube SB–234 SB–234 SB–241 ... ... ... A95052 A95052 A95052 H32 H34 O 31 32 33 34 35 ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... A95083 A95083 A95083 A95083 A95083 O O O O O 36 37 38 39 ... ... ... ... Plate, Plate, Plate, Plate, sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 ... ... ... ... A95083 A95083 A95083 A95083 H112 H112 H32 H32 40 41 42 ... ... ... Bar, rod, shapes Bar, rod, shapes Bar, rod, shapes SB–221 SB–221 SB–221 ... ... ... A95083 A95083 A95083 O H111 H112 162 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 ð15Þ ð15Þ smls. smls. smls. smls. smls. Class/Condition/ Temper Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) P-No. Min. Tensile Strength, ksi 1 2 3 4 5 0.010–0.500 0.010–0.500 0.010–0.500 0.010–0.500 0.010–0.500 21 21 21 21 21 14 14 17 20 27 5 5 12 17 24 NP NP NP NP NP 250 250 300 250 250 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 6 7 8 9 ... ... 0.010–0.200 0.010–0.200 21 21 21 21 14 14 20 22 5 5 17 19 NP NP NP NP 250 250 250 250 (Cl. (Cl. (Cl. (Cl. 10 11 12 13 14 15 ... ... ≥1.000 <1.000 ≤4.000 ≤4.000 21 21 21 21 21 21 14 14 14 27 14 14 5 5 5 24 5 ... NP NP NP NP NP NP 250 250 250 250 250 250 16 17 18 19 0.006–3.000 0.250–3.000 0.051–2.000 0.051–1.000 22 22 22 22 22 23 28 32 8.5 9 21 25 NP NP NP NP 20 21 22 23 24 0.006–3.000 0.250–0.499 0.500–3.000 0.017–2.000 0.009–1.000 22 22 22 22 22 25 28 25 31 34 9.5 16 9.5 23 26 25 26 27 0.010–0.450 0.010–0.450 0.010–0.450 22 22 22 25 31 34 28 29 30 0.010–0.200 0.010–0.200 ... 22 22 22 31 32 33 34 35 0.051–1.500 1.501–3.000 3.001–5.000 5.001–7.000 7.001–8.000 36 37 38 39 40 41 42 VIII-1 XII External Pressure Chart No. only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 NFA–1 NFA–1 NFA–1 NFA–2 NFA–2 T3 T3, T4, T4, T4, 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–1 NFA–1 NFA–2 NFA–2 T3 T3, W3 T4, W4 T4, W4 (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 only) only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 400 400 NFA–1 NFA–1 NFA–1 NFA–1 NFA–1 NFA–1 T3 T3, T3, T4, T3 T3, 300 300 250 250 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–3 NFA–3 NFA–3 NFA–4 ... W3 W3 W3 NP NP NP NP NP 250 250 250 200 200 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 NFA–8 NFA–8 NFA–8 NFA–3 NFA–4 ... W3 W3 W3 W3 10 23 26 NP NP NP 300 (Cl. 3 only) 200 (Cl. 3 only) 200 (Cl. 3 only) 400 400 400 400 400 400 NFA–8 NFA–8 NFA–8 ... W4 W4 31 34 25 23 26 10 NP NP NP 200 (Cl. 3 only) 200 (Cl. 3 only) 250 (Cl. 3 only) 400 400 400 400 400 400 NFA–8 NFA–8 NFA–8 W4 W4 ... 25 25 25 25 25 40 39 38 37 36 18 17 16 15 14 NP NP NP NP NP 150 150 150 150 150 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 only) only) only) only) only) 150 150 150 150 150 150 150 150 150 150 NFA–11 NFA–11 NFA–11 NFA–11 NFA–11 G18, G18, G18, G18, G18, G19 G19 G19 G19 G19 0.250–1.500 1.501–3.000 0.125–1.500 1.501–3.000 25 25 25 25 40 39 44 41 18 17 31 29 NP NP NP NP 150 150 150 150 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 150 150 150 150 150 150 150 150 NFA–11 NFA–11 NFA–11 NFA–11 G18, G18, G18, G18, G19, G19, G19, G19, ≤5.000 ≤5.000 ≤5.000 25 25 25 39 40 39 16 24 16 NP NP NP 150 (Cl. 3 only) 150 (Cl. 3 only) 150 (Cl. 3 only) 150 150 150 150 150 150 NFA–11 NFA–11 NFA–11 G18, G19 G18, G19, W3 G18, G19, W3 I III 163 Notes W3 W3 W3 W3 W3 W4 W4 W7 W3 W3 W3 W3 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Line No. Size/ Thickness, in. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 3.4 3.4 4.9 5.7 7.8 3.4 3.4 4.9 5.7 7.8 3.4 3.4 4.9 5.7 7.7 3.0 3.0 4.0 4.9 6.3 2.4 2.4 3.6 4.3 5.4 1.8 1.8 3.0 3.0 3.5 1.4 1.4 2.4 2.4 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 3.4 3.4 5.7 6.3 3.4 3.4 5.7 6.3 3.4 3.4 5.7 6.3 3.0 3.0 4.9 5.3 2.4 2.4 4.3 4.3 1.8 1.8 3.0 3.0 1.4 1.4 2.4 2.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 14 15 3.4 3.4 3.4 7.8 3.4 3.4 3.4 3.4 3.4 7.8 3.4 3.4 3.4 3.4 3.4 7.7 3.4 3.4 3.0 3.0 3.0 6.3 3.0 3.0 2.4 2.4 2.4 5.4 2.4 2.4 1.8 1.8 1.8 3.5 1.8 1.8 1.4 1.4 1.4 2.5 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 5.7 6.0 8.0 9.1 5.7 6.0 8.0 9.1 5.7 6.0 8.0 9.1 5.5 5.8 7.0 8.0 5.0 5.1 5.8 5.8 3.8 3.8 3.8 3.8 2.4 2.4 2.4 2.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 24 6.3 8.0 6.3 8.9 9.7 6.3 8.0 6.3 8.9 9.7 6.3 8.0 6.3 8.9 9.7 6.3 8.0 6.3 8.9 9.7 5.6 6.2 6.0 6.2 6.2 4.1 4.1 4.1 4.1 4.1 2.4 2.4 2.4 2.4 2.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 6.7 8.9 9.7 6.7 8.9 9.7 6.7 8.9 9.7 6.7 8.9 9.7 5.6 6.1 6.1 4.1 4.1 4.1 2.3 2.3 2.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 8.9 9.7 6.7 8.9 9.7 6.7 8.9 9.7 6.7 8.9 9.7 6.7 6.2 6.2 5.6 4.1 4.1 4.1 2.4 2.4 2.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 35 11.4 11.1 10.7 10.0 9.3 11.4 11.1 10.7 10.0 9.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 11.4 11.1 12.6 11.7 11.4 11.1 12.6 11.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 40 41 42 10.7 11.4 10.7 10.7 11.4 10.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 164 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 14 15 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 24 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ 25 26 27 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ 28 29 30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ 31 32 33 34 35 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 40 41 42 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 165 ð15Þ ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition ð15Þ ð15Þ ð15Þ ð15Þ Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper ... ... ... Smls. extr. tube Smls. extr. tube Smls. extr. tube SB–241 SB–241 SB–241 ... ... ... A95083 A95083 A95083 O H111 H112 4 5 6 7 8 9 ... ... ... ... ... ... Die & hand forgings Die & hand forgings Die & hand forgings Die & hand forgings Plate, sheet Plate, sheet SB–247 SB–247 SB–247 SB–247 SB–928 SB–928 ... ... ... ... ... ... A95083 A95083 A95083 A95083 A95083 A95083 H111 H112 H111 wld. H112 wld. H321 H321 10 11 12 13 14 ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... A95086 A95086 A95086 A95086 A95086 O H112 H112 H112 H112 15 16 ... ... Plate, sheet Plate, sheet SB–209 SB–209 ... ... A95086 A95086 H32 H34 17 18 19 20 21 ... ... ... ... ... Bar, rod, shapes Smls. extr. tube Smls. extr. tube Smls. extr. tube Plate, sheet SB–221 SB–241 SB–241 SB–241 SB–928 ... ... ... ... ... A95086 A95086 A95086 A95086 A95086 H112 O H111 H112 H116 22 23 24 25 26 ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... A95154 A95154 A95154 A95154 A95154 O H112 H112 H32 H34 27 28 29 30 ... ... ... ... Drawn smls. tube Drawn smls. tube Bar, rod, shapes Bar, rod, shapes SB–210 SB–210 SB–221 SB–221 ... ... ... ... A95154 A95154 A95154 A95154 O H34 O H112 31 32 33 34 35 ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... A95254 A95254 A95254 A95254 A95254 O H112 H112 H32 H34 36 37 38 39 40 ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... A95454 A95454 A95454 A95454 A95454 O H112 H112 H32 H34 41 42 43 ... ... ... Bar, rod, shapes Bar, rod, shapes Bar, rod, shapes SB–221 SB–221 SB–221 ... ... ... A95454 A95454 A95454 O H111 H112 166 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... 25 25 25 39 40 39 16 24 16 NP NP NP 150 (Cl. 3 only) 150 (Cl. 3 only) 150 (Cl. 3 only) 150 150 150 150 150 150 NFA–11 NFA–11 NFA–11 G18, G19 G18, G19, W3 G18, G19, W3 4 5 6 7 8 9 ≤4.000 ≤4.000 ≤4.000 ≤4.000 0.125–1.500 1.501–3.000 25 25 25 25 25 25 39 39 38 38 44 41 20 16 ... ... 31 29 NP NP NP NP NP NP 150 150 150 150 150 150 (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 only) only) only) only) only) only) 150 150 150 150 150 150 150 150 150 150 150 150 NFA–11 NFA–11 NFA–11 NFA–11 NFA–11 NFA–11 G18, G18, G18, G18, G18, G18, G19, G19, G19, G19, G19, G19, 10 11 12 13 14 0.020–2.000 0.188–0.499 0.500–1.000 1.001–2.000 2.001–3.000 25 25 25 25 25 35 36 35 35 34 14 18 16 14 14 NP NP NP NP NP 150 150 150 150 150 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 only) only) only) only) only) 150 150 150 150 150 150 150 150 150 150 NFA–9 NFA–9 NFA–9 NFA–9 NFA–9 G18, G18, G18, G18, G18, G19 G19, W3 G19, W3 G19, W3 G19 15 16 0.051–2.000 0.051–1.000 25 25 40 44 28 34 NP NP 150 (Cl. 3 only) 150 (Cl. 3 only) 150 150 150 150 NFA–11 NFA–11 G18, G19, W3 G18, G19, W3 17 18 19 20 21 ≤5.000 ... ... ... 0.063–2.000 25 25 25 25 25 35 35 36 35 40 14 14 21 14 28 NP NP NP NP NP 150 150 150 150 150 150 150 150 150 150 150 150 150 150 NFA–9 NFA–9 NFA–9 NFA–9 NFA–11 G18, G18, G18, ... G18, G19, W4 G19 G19, W3 22 23 24 25 26 0.051–3.000 0.250–0.499 0.500–3.000 0.051–2.000 0.051–1.000 22 22 22 22 22 30 32 30 36 39 11 18 11 26 29 NP NP NP NP NP 27 28 29 30 0.010–0.450 0.010–0.450 ... ... 22 22 22 22 30 39 30 30 11 29 11 11 31 32 33 34 35 0.051–3.000 0.250–0.499 0.500–3.000 0.051–2.000 0.051–1.000 22 22 22 22 22 30 32 30 36 39 36 37 38 39 40 0.051–3.000 0.250–0.499 0.500–3.000 0.051–2.000 0.051–1.000 22 22 22 22 22 41 42 43 ≤5.000 ≤5.000 ≤5.000 22 22 22 W4 W4 W7 W7 W3 W3 (Cl. 3 (Cl. 3 (Cl. 3 (Cl. 3 NP only) only) only) only) 150 150 150 150 150 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 only) only) only) only) only) 150 150 150 150 150 150 150 150 150 150 NFA–5 NFA–11 NFA–5 NFA–11 NFA–11 G18, G18, G18, G18, G18, G19 G19, G19, G19, G19, NP NP NP NP 150 150 150 150 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 150 150 150 150 150 150 150 150 NFA–5 NFA–5 NFA–5 NFA–5 G18, G18, G18, G18, G19 G19, W3 G19 G19, W3 11 18 11 26 29 NP NP NP NP NP 150 150 150 150 150 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 only) only) only) only) only) 150 150 150 150 150 150 150 150 150 150 NFA–5 NFA–11 NFA–5 NFA–11 NFA–11 G18, G18, G18, G18, G18, G19 G19, G19, G19, G19, 31 32 31 36 39 12 18 12 26 29 NP NP NP NP NP 250 250 250 250 250 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 NFA–6 NFA–6 NFA–6 NFA–6 NFA–6 T1 T1, T1, T1, T1, 31 33 31 12 19 12 NP NP NP 250 (Cl. 3 only) 250 (Cl. 3 only) 250 (Cl. 3 only) 400 400 400 400 400 400 NFA–6 NFA–6 NFA–6 T1 T1, W3 T1, W3 167 G19, W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 10.7 11.4 10.7 10.7 11.4 10.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 7 8 9 11.1 10.7 10.9 10.9 12.6 11.7 11.1 10.7 10.9 10.9 12.6 11.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 14 9.3 10.3 10.0 9.3 9.3 9.3 10.3 10.0 9.3 9.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 11.4 12.6 11.4 12.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 21 9.3 9.3 10.3 9.3 11.4 9.3 9.3 10.3 9.3 11.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 26 7.3 9.1 7.3 10.3 11.1 7.3 9.1 7.3 10.3 11.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 7.3 11.1 7.3 7.3 7.3 11.1 7.3 7.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 35 7.3 9.1 7.3 10.3 11.1 7.3 9.1 7.3 10.3 11.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 40 8.0 9.1 8.0 10.3 11.1 8.0 9.1 8.0 10.3 11.1 8.0 9.1 8.0 10.3 11.1 7.5 7.5 7.5 7.5 7.5 5.5 5.5 5.5 5.5 5.5 4.1 4.1 4.1 4.1 4.1 3.0 3.0 3.0 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 8.0 9.4 8.0 8.0 9.4 8.0 8.0 9.4 8.0 7.5 7.5 7.5 5.5 5.5 5.5 4.1 4.1 4.1 3.0 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 168 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 7 8 9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 14 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 21 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 26 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 35 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 40 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 169 ð15Þ ð15Þ ð15Þ ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper ... ... ... ... ... Cond. & heat exch. tubes Cond. & heat exch. tubes Smls. extr. tube Smls. extr. tube Smls. extr. tube SB–234 SB–234 SB–241 SB–241 SB–241 ... ... ... ... ... A95454 A95454 A95454 A95454 A95454 H32 H34 O H111 H112 6 7 8 9 10 ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... A95456 A95456 A95456 A95456 A95456 O O O O O 11 12 13 14 15 ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... A95456 A95456 A95456 A95456 A95456 H112 H112 H32 H32 H32 16 17 18 ... ... ... Bar, rod, shapes Bar, rod, shapes Bar, rod, shapes SB–221 SB–221 SB–221 ... ... ... A95456 A95456 A95456 O H111 H112 19 20 21 ... ... ... Smls. extr. tube Smls. extr. tube Smls. extr. tube SB–241 SB–241 SB–241 ... ... ... A95456 A95456 A95456 O H111 H112 22 23 24 ... ... ... Plate, sheet Plate, sheet Plate, sheet SB–928 SB–928 SB–928 ... ... ... A95456 A95456 A95456 H321 H321 H321 25 26 27 28 29 ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... A95652 A95652 A95652 A95652 A95652 O H112 H112 H32 H34 ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 30 31 32 33 34 ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, sheet sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 SB–209 ... ... ... ... ... A96061 A96061 A96061 A96061 A96061 T4 T451 T6 T651 T651 ð15Þ ð15Þ ð15Þ ð15Þ 35 36 37 38 ... ... ... ... Plate, Plate, Plate, Plate, sheet sheet sheet sheet SB–209 SB–209 SB–209 SB–209 ... ... ... ... A96061 A96061 A96061 A96061 T4 wld. T451 wld. T6 wld. T651 wld. ð15Þ ð15Þ ð15Þ ð15Þ 39 40 41 42 ... ... ... ... Drawn Drawn Drawn Drawn SB–210 SB–210 SB–210 SB–210 ... ... ... ... A96061 A96061 A96061 A96061 T4 T6 T4 wld. T6 wld. smls. smls. smls. smls. tube tube tube tube 170 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) P-No. Min. Tensile Strength, ksi 1 2 3 4 5 0.010–0.250 0.010–0.250 ≤5.000 ≤5.000 ≤5.000 22 22 22 22 22 36 39 31 33 31 26 29 12 19 12 NP NP NP NP NP 250 250 250 250 250 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 6 7 8 9 10 0.051–1.500 1.501–3.000 3.001–5.000 5.001–7.000 7.001–8.000 25 25 25 25 25 42 41 40 39 38 19 18 17 16 15 NP NP NP NP NP 150 150 150 150 150 (Cl. (Cl. (Cl. (Cl. (Cl. 11 12 13 14 15 0.250–1.500 1.501–3.000 0.188–0.499 0.500–1.500 1.501–3.000 25 25 25 25 25 42 41 46 44 41 19 18 33 31 29 NP NP NP NP NP 150 150 150 150 150 (Cl. (Cl. (Cl. (Cl. (Cl. 16 17 18 ≤5.000 ≤5.000 ≤5.000 25 25 25 41 42 41 19 26 19 19 20 21 ≤5.000 ≤5.000 ≤5.000 25 25 25 41 42 41 22 23 24 0.188–0.499 0.500–1.500 1.501–3.000 25 25 25 25 26 27 28 29 0.051–3.000 0.250–0.499 0.500–3.000 0.051–2.000 0.051–1.000 30 31 32 33 34 VIII-1 XII External Pressure Chart No. only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 NFA–6 NFA–6 NFA–6 NFA–6 NFA–6 T1, T1, T1 T1, T1, 3 3 3 3 3 only) only) only) only) only) 150 150 150 150 150 150 150 150 150 150 NFA–10 NFA–10 NFA–10 NFA–10 NFA–10 G18, G18, G18, G18, G18, G19 G19 G19 G19 G19 3 3 3 3 3 only) only) only) only) only) 150 150 150 150 150 150 150 150 150 150 NFA–10 NFA–10 NFA–10 NFA–10 NFA–10 G18, G18, G18, G18, G18, G19, G19, G19, G19, G19, NP NP NP 150 (Cl. 3 only) 150 (Cl. 3 only) 150 (Cl. 3 only) 150 150 150 150 150 150 NFA–10 NFA–10 NFA–10 G18, G19 G18, G19, W3 G18, G19, W3 19 26 19 NP NP NP 150 (Cl. 3 only) 150 (Cl. 3 only) 150 (Cl. 3 only) 150 150 150 150 150 150 NFA–10 NFA–10 NFA–10 G18, G19 G18, G19, W3 G18, G19, W3 46 44 41 33 31 29 NP NP NP 150 (Cl. 3 only) 150 (Cl. 3 only) 150 (Cl. 3 only) 150 150 150 150 150 150 NFA–10 NFA–10 NFA–10 G18, G19, W3 G18, G19, W3 G18, G19, W3 22 22 22 22 22 25 28 25 31 34 9.5 16 9.5 23 26 NP NP NP NP NP 250 250 250 200 200 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 NFA–8 NFA–8 NFA–8 NFA–3 NFA–4 T2 T1, T2, T1, T1, 0.006–0.249 0.250–3.000 0.006–0.249 0.250–4.000 4.001–6.000 23 23 23 23 23 30 30 42 42 40 16 16 35 35 35 NP NP NP NP NP 400 400 400 400 400 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 NFA–13 NFA–13 NFA–12 NFA–12,13 NFA–12,13 G24, G24, G24, G24, G24, T3, T3, T3, T3, T3, W4 W4 W4 W4, W16 W4, W16 35 36 37 38 0.006–0.249 0.250–3.000 0.006–0.249 0.250–6.000 23 23 23 23 24 24 24 24 ... ... ... ... NP NP NP NP 400 (Cl. 3 only) NP 400 (Cl. 3 only) NP 400 400 400 400 400 400 400 400 NFA–13 NFA–13 NFA–12 NFA–12,13 G24, G24, G24, G24, T3, T3, T3, T3, W7 W7 W7 W7, W16 39 40 41 42 0.025–0.500 0.025–0.500 0.025–0.500 0.025–0.500 23 23 23 23 30 42 24 24 16 35 ... ... NP NP NP NP 400 400 400 400 400 400 400 400 400 400 400 400 NFA–13 NFA–12,13 NFA–13 NFA–12,13 T3, T3, T3, T3, I III (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 171 Notes W4 W4 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W3 W4 W4, W16 W7 W7, W16 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. Line No. Size/ Thickness, in. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 10.3 11.1 8.0 9.4 8.0 10.3 11.1 8.0 9.4 8.0 10.3 11.1 8.0 9.4 8.0 7.5 7.5 7.5 7.5 7.5 5.5 5.5 5.5 5.5 5.5 4.1 4.1 4.1 4.1 4.1 3.0 3.0 3.0 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 10 12.0 11.7 11.3 10.7 10.0 12.0 11.7 11.3 10.7 10.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 15 12.0 11.7 13.1 12.6 11.7 12.0 11.7 13.1 12.6 11.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 11.7 12.0 11.7 11.7 12.0 11.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 11.7 12.0 11.7 11.7 12.0 11.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 13.1 12.6 11.7 13.1 12.6 11.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 29 6.3 8.0 6.3 8.9 9.7 6.3 8.0 6.3 8.9 9.7 6.3 8.0 6.3 8.9 9.7 6.3 7.5 6.3 7.5 7.5 6.1 6.1 6.1 6.1 6.1 4.1 4.1 4.1 4.1 4.1 2.4 2.4 2.4 2.4 2.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 33 34 8.6 8.6 12.0 12.0 11.4 8.6 8.6 12.0 12.0 11.4 8.6 8.6 12.0 12.0 11.4 8.5 8.5 11.7 11.7 11.1 6.9 6.9 8.4 8.4 8.2 6.3 6.3 6.3 6.3 6.3 4.5 4.5 4.5 4.5 4.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 38 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.8 6.8 6.8 6.8 5.5 5.5 5.5 5.5 4.6 4.6 4.6 4.6 3.5 3.5 3.5 3.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 8.6 12.0 6.9 6.9 8.6 12.0 6.9 6.9 8.6 12.0 6.9 6.9 8.5 11.7 6.8 6.8 6.9 8.4 5.5 5.5 6.3 6.3 4.6 4.6 4.5 4.5 3.5 3.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 172 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 7 8 9 10 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 15 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 29 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 33 34 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 35 36 37 38 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ 39 40 41 42 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ 173 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 1 2 3 4 ... ... ... ... Bar, Bar, Bar, Bar, rod, rod, rod, rod, wire wire wire wire SB–211 SB–211 SB–211 SB–211 ... ... ... ... A96061 A96061 A96061 A96061 T6 T651 T6 wld. T651 wld. ð15Þ ð15Þ ð15Þ ð15Þ 5 6 7 8 ... ... ... ... Bar, Bar, Bar, Bar, rod, rod, rod, rod, shapes shapes shapes shapes SB–221 SB–221 SB–221 SB–221 ... ... ... ... A96061 A96061 A96061 A96061 T4 T6 T4 wld. T6 wld. ð15Þ ð15Þ ð15Þ ð15Þ 9 10 11 12 ... ... ... ... Cond. Cond. Cond. Cond. & & & & SB–234 SB–234 SB–234 SB–234 ... ... ... ... A96061 A96061 A96061 A96061 T4 T6 T4 wld. T6 wld. ð15Þ ð15Þ ð15Þ ð15Þ 13 14 15 16 ... ... ... ... Smls. Smls. Smls. Smls. extr. extr. extr. extr. SB–241 SB–241 SB–241 SB–241 ... ... ... ... A96061 A96061 A96061 A96061 T4 T6 T4 wld. T6 wld. ð15Þ ð15Þ ð15Þ 17 18 19 ... ... ... Smls. pipe Smls. pipe Smls. pipe SB–241 SB–241 SB–241 ... ... ... A96061 A96061 A96061 T6 drawn T6 T6 wld. ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 20 21 22 23 24 25 ... ... ... ... ... ... Die forgings Hand forgings Hand forgings Die & hand forgings Shapes Shapes SB–247 SB–247 SB–247 SB–247 SB–308 SB–308 ... ... ... ... ... ... A96061 A96061 A96061 A96061 A96061 A96061 T6 T6 T6 T6 wld. T6 T6 wld. 26 27 28 29 ... ... ... ... Drawn smls. tube Drawn smls. tube Bar, rod, shapes Bar, rod, shapes SB–210 SB–210 SB–221 SB–221 ... ... ... ... A96063 A96063 A96063 A96063 T6 T6 wld. T1 T1 30 31 32 33 34 ... ... ... ... ... Bar, Bar, Bar, Bar, Bar, SB–221 SB–221 SB–221 SB–221 SB–221 ... ... ... ... ... A96063 A96063 A96063 A96063 A96063 T5 T5 T6 T5 wld. T6 wld. 35 36 37 38 ... ... ... ... Smls. Smls. Smls. Smls. extr. extr. extr. extr. tube tube tube tube SB–241 SB–241 SB–241 SB–241 ... ... ... ... A96063 A96063 A96063 A96063 T1 T1 T5 T5 39 40 41 42 43 ... ... ... ... ... Smls. Smls. Smls. Smls. Smls. extr. tube extr. tube extr. tube pipe pipe SB–241 SB–241 SB–241 SB–241 SB–241 ... ... ... ... ... A96063 A96063 A96063 A96063 A96063 T6 T5 wld. T6 wld. T6 T6 wld. rod, rod, rod, rod, rod, heat heat heat heat exch. exch. exch. exch. tubes tubes tubes tubes tube tube tube tube shapes shapes shapes shapes shapes 174 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. ð15Þ ð15Þ ð15Þ ð15Þ Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) Min. Yield Strength, ksi 0.125–0.249 0.250–8.000 0.125–0.249 0.250–8.000 23 23 23 23 42 42 24 24 35 35 ... ... NP NP NP NP 400 400 400 400 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 5 6 7 8 ... ... ... ... 23 23 23 23 26 38 24 24 16 35 ... ... NP NP NP NP 400 400 400 400 (Cl. (Cl. (Cl. (Cl. 9 10 11 12 0.025–0.200 0.025–0.200 0.025–0.200 0.025–0.200 23 23 23 23 30 42 24 24 16 35 ... ... NP NP NP NP 400 400 400 400 13 14 15 16 ... ... ... ... 23 23 23 23 26 38 24 24 16 35 ... ... NP NP NP NP 400 400 400 400 17 18 19 <1.000 ≥1.000 ... 23 23 23 42 38 24 35 35 ... 20 21 22 23 24 25 ≤4.000 ≤4.000 4.001–8.000 ≤8.000 ... ... 23 23 23 23 23 23 38 37 35 24 38 24 26 27 28 29 0.025–0.500 0.025–0.500 ≤0.500 0.501–1.000 23 23 23 23 30 31 32 33 34 ≤0.500 0.501–1.000 ≤1.000 ≤1.000 ≤1.000 35 36 37 38 39 40 41 42 43 Line No. VIII-1 XII External Pressure Chart No. 1 2 3 4 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–12 NFA–12,13 NFA–12 NFA–12,13 G24, G24, G13, G13, T3, W4 T3, W4, W16 G24, T3, W7 G24, T3, W7, W16 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–13 NFA–12,13 NFA–13 NFA–12,13 G24, G24, G24, G13, T3, W4 T3, W4, W16 T3, W7 G24, T3, W7, W16 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–13 NFA–12 NFA–13 NFA–12 T3, T3, T3, T3, (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–13 NFA–12,13 NFA–13 NFA–12,13 G24, G24, G24, G24, NP NP NP 400 (Cl. 3 only) 400 (Cl. 3 only) 400 (Cl. 3 only) 400 400 400 400 400 400 NFA–12,13 NFA–12,13 NFA–12,13 T3, W4, W16 T3, W4, W16 T3, W7, W16 35 33 32 ... 35 ... NP NP NP NP NP NP 400 400 400 400 400 400 (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 only) only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 400 400 NFA–12,13 NFA–12,13 NFA–12,13 NFA–12,13 NFA–12,13 NFA–12,13 T3, W4, T3, W4, T3, W4, T3, W7, T3, W4, G13, T3, 33 17 17 16 28 ... 9 8 NP NP NP NP 400 400 350 350 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 400 400 400 400 400 400 400 400 NFA–1 NFA–1 NFA–1 NFA–1 T3, T3, T3, T3, W4 W7 W4 W4 23 23 23 23 23 22 21 30 17 17 16 15 25 ... ... NP NP NP NP NP 400 400 400 400 400 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 NFA–1 NFA–1 NFA–1 NFA–1 NFA–1 T3, T3, T3, T3, T3, W4 W4 W4 W7 W7 ≤0.500 0.501–1.000 ≤0.500 0.501–1.000 23 23 23 23 17 16 22 21 9 8 16 15 NP NP NP NP 350 350 350 350 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) NP NP 400 400 NP NP 400 400 NFA–1 NFA–1 NFA–1 NFA–1 T3, T3, T3, T3, W4 W4 W4 W4 ≤1.000 ≤1.000 ≤1.000 ... ... 23 23 23 23 23 30 17 17 30 17 25 ... ... 25 ... NP NP NP NP NP 350 350 350 400 400 (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 NFA–1 NFA–1 NFA–1 NFA–1 NFA–1 T3, T3, T3, T3, T3, W4 W7 W7 W4 W7 I III 175 Notes W4 W4 W7 W7 T3, T3, T3, T3, W4 W4, W16 W7 W7, W16 W16 W16 W16 W16 W16 W7, W16 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. P-No. Min. Tensile Strength, ksi Size/ Thickness, in. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 12.0 12.0 6.9 6.9 12.0 12.0 6.9 6.9 12.0 12.0 6.9 6.9 11.7 11.7 6.8 6.8 8.4 8.4 5.5 5.5 6.3 6.4 4.6 4.6 4.5 4.5 3.5 3.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 7.4 10.9 6.9 6.9 7.4 10.9 6.9 6.9 7.4 10.9 6.9 6.9 7.4 10.6 6.8 6.8 6.0 7.9 5.5 5.5 5.8 6.3 4.6 4.6 4.4 4.5 3.5 3.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 8.6 12.0 6.9 6.9 8.6 12.0 6.9 6.9 8.6 12.0 6.9 6.9 8.5 11.7 6.8 6.8 6.9 8.4 5.5 5.5 6.3 6.3 4.6 4.6 4.5 4.5 3.5 3.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16 7.4 10.9 6.9 6.9 7.4 10.9 6.9 6.9 7.4 10.9 6.9 6.9 7.4 10.6 6.8 6.8 6.0 7.9 5.5 5.5 5.8 6.3 4.6 4.6 4.4 4.5 3.5 3.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 12.0 10.9 6.9 12.0 10.9 6.9 12.0 10.9 6.9 11.7 10.6 6.8 8.4 7.9 5.5 6.3 6.3 4.6 4.5 4.5 3.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 24 25 10.9 10.6 10.0 6.9 10.9 6.9 10.9 10.6 10.0 6.9 10.9 6.9 10.9 10.6 10.0 6.9 10.9 6.9 10.6 10.5 9.9 6.8 10.6 6.8 7.9 7.7 7.4 5.5 7.2 5.0 6.3 6.3 6.1 4.6 5.6 4.2 4.5 4.5 4.5 3.5 4.0 3.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 26 27 28 29 9.4 4.3 4.9 4.6 9.4 4.3 4.9 4.6 9.4 4.3 4.9 4.6 7.4 4.2 4.2 4.0 5.5 3.9 4.2 4.0 3.4 3.0 3.4 3.4 2.0 2.0 2.0 2.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 33 34 6.3 6.0 8.6 4.3 4.3 6.3 6.0 8.6 4.3 4.3 6.3 6.0 8.6 4.3 4.3 5.1 4.9 6.8 4.2 4.2 4.6 4.3 5.0 3.9 3.9 3.4 3.4 3.4 3.0 3.0 2.0 2.0 2.0 2.0 2.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 38 4.9 4.6 6.3 6.0 4.9 4.6 6.3 6.0 4.9 4.6 6.3 6.0 4.2 4.0 5.1 4.9 4.2 4.0 4.6 4.4 3.4 3.4 3.4 3.4 ... ... 2.0 2.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 43 8.6 4.3 4.3 8.6 4.3 8.6 4.3 4.3 8.6 4.3 8.6 4.3 4.3 8.6 4.3 6.8 4.2 4.2 6.8 4.2 5.0 3.9 3.9 5.0 3.9 3.4 3.0 3.0 3.4 3.0 2.0 2.0 2.0 2.0 2.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 176 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ 5 6 7 8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ 9 10 11 12 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ 13 14 15 16 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ 20 21 22 23 24 25 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 26 27 28 29 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 33 34 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 38 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 43 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 177 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. SB–187 SB–75 SB–42 ... ... ... C10200 C10200 C10200 O60 O60 O61 SB–152 SB–152 SB–152 SB–152 SB–152 SB–152 ... ... ... ... ... ... C10200 C10200 C10200 C10200 C10200 C10200 H00 H01 H02 H03 H04 O25 SB–42 SB–75 SB–111 SB–395 ... ... ... ... C10200 C10200 C10200 C10200 H55 H55 H55 H55 Class/Condition/ Temper ... ... ... Rod Smls. tube Smls. pipe 4 5 6 7 8 9 ... ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, Plate, sheet, sheet, sheet, sheet, sheet, sheet, 10 11 12 13 ... ... ... ... Smls. Smls. Smls. Smls. pipe tube cond. tube U–bend tube 14 15 16 ... ... ... Smls. pipe Smls. tube Smls. cond. tube SB–42 SB–75 SB–111 ... ... ... C10200 C10200 C10200 H80 H80 H80 ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 17 18 19 20 21 22 ... ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, Plate, sheet, sheet, sheet, sheet, sheet, sheet, strip strip strip strip strip strip SB–152 SB–152 SB–152 SB–152 SB–152 SB–152 ... ... ... ... ... ... C10400 C10400 C10400 C10400 C10400 C10400 H00 H01 H02 H03 H04 O25 ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 23 24 25 26 27 28 ... ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, Plate, sheet, sheet, sheet, sheet, sheet, sheet, strip strip strip strip strip strip SB–152 SB–152 SB–152 SB–152 SB–152 SB–152 ... ... ... ... ... ... C10500 C10500 C10500 C10500 C10500 C10500 H00 H01 H02 H03 H04 O25 ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 29 30 31 32 33 34 ... ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, Plate, sheet, sheet, sheet, sheet, sheet, sheet, strip strip strip strip strip strip SB–152 SB–152 SB–152 SB–152 SB–152 SB–152 ... ... ... ... ... ... C10700 C10700 C10700 C10700 C10700 C10700 H00 H01 H02 H03 H04 O25 ð15Þ 35 36 ... ... Bar, rod Bar, rod SB–187 SB–187 ... ... C11000 C11000 H04 O60 ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 37 38 39 40 41 42 ... ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, Plate, SB–152 SB–152 SB–152 SB–152 SB–152 SB–152 ... ... ... ... ... ... C11000 C11000 C11000 C11000 C11000 C11000 H00 H01 H02 H03 H04 O25 43 44 45 ... ... ... Smls. tube Smls. tube Smls. pipe SB–75 SB–75 SB–42 ... ... ... C12000 C12000 C12000 O50 O60 O61 ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ sheet, sheet, sheet, sheet, sheet, sheet, strip strip strip strip strip strip strip, strip, strip, strip, strip, strip, bar bar bar bar bar bar 178 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... 31 31 31 28 30 30 8 9 9 NP 400 400 300 300 (Cl. 3 only) 300 400 400 400 400 400 400 NFC–1 NFC–1 NFC–1 T3 G1, T3, W10 G1, T3, W10 4 5 6 7 8 9 ... ... ... ... ... ... 31 31 31 31 31 31 30 30 30 30 30 30 10 10 10 10 10 10 NP NP NP NP NP NP 300 300 300 300 300 300 only) only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 400 400 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 G33, G33, G33, G33, G33, T2 10 11 12 13 2 < NPS ≤ 12 ... <3 ... 31 31 31 31 36 36 36 36 30 30 30 30 400 400 NP NP 400 400 (Cl. 3 only) 400 400 (Cl. 3 only) 400 400 400 400 400 400 400 400 NFC–6 NFC–6 NFC–6 NFC–6 G1, G1, G9, G9, 14 15 16 1 /8 < NPS ≤ 2 <4 <3 31 31 31 45 45 45 40 40 40 400 400 NP 300 350 300 400 400 400 400 400 400 NFC–6 NFC–6 NFC–6 G1, G6, G9, T4, W9, W10 G1, G6, G9, T4, W9, W10 G6, G9, T4, W9 17 18 19 20 21 22 ... ... ... ... ... ... 31 31 31 31 31 31 30 30 30 30 30 30 10 10 10 10 10 10 NP NP NP NP NP NP 300 300 300 300 300 300 400 400 400 400 400 400 400 400 400 400 400 400 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 G33, G33, G33, G33, G33, T2 T2 T2 T2 T2 T2 23 24 25 26 27 28 ... ... ... ... ... ... 31 31 31 31 31 31 30 30 30 30 30 30 10 10 10 10 10 10 NP NP NP NP NP NP 300 300 300 300 300 300 400 400 400 400 400 400 400 400 400 400 400 400 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 G33, G33, G33, G33, G33, T2 T2 T2 T2 T2 T2 29 30 31 32 33 34 ... ... ... ... ... ... 31 31 31 31 31 31 30 30 30 30 30 30 10 10 10 10 10 10 NP NP NP NP NP NP 300 300 300 300 300 300 400 400 400 400 400 400 400 400 400 400 400 400 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 G33, G33, G33, G33, G33, T2 T2 T2 T2 T2 T2 35 36 ... ... 31 31 28 28 8 8 NP NP 300 300 400 400 400 400 NFC–1 NFC–1 G33, T3 T3 37 38 39 40 41 42 ≤2 ≤2 ≤2 ≤2 ≤2 ≤2 31 31 31 31 31 31 30 30 30 30 30 30 10 10 10 10 10 10 NP NP NP NP NP NP NP NP NP NP NP NP 400 400 400 400 400 400 400 400 400 400 400 400 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 G33, G33, G33, G33, G33, T2 43 44 45 ... ... ... 31 31 31 30 30 30 9 9 9 NP 400 400 300 (Cl. 3 only) 300 (Cl. 3 only) 300 NP 400 400 NP 400 400 NFC–1 NFC–1 NFC–1 ... G1, T3, W10 G1, T3, W10 (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 179 T2 T2 T2 T2 T2 G9, W9, W10 G9, W9, W10 W9 W9 T2 T2 T2 T2 T2 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 5.3 6.0 6.0 4.5 5.1 5.1 4.3 4.9 4.9 4.2 4.8 4.8 4.2 4.7 4.7 4.0 4.0 4.0 3.0 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 7 8 9 6.7 6.7 6.7 6.7 6.7 6.7 5.6 5.6 5.6 5.6 5.6 5.6 5.4 5.4 5.4 5.4 5.4 5.4 5.3 5.3 5.3 5.3 5.3 5.3 5.0 5.0 5.0 5.0 5.0 5.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.0 10.0 10.0 10.0 9.7 9.7 9.7 9.7 9.4 9.4 9.4 9.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.5 12.5 12.5 11.8 11.8 11.8 4.3 4.3 4.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 21 22 6.7 6.7 6.7 6.7 6.7 6.7 5.6 5.6 5.6 5.6 5.6 5.6 5.4 5.4 5.4 5.4 5.4 5.4 5.3 5.3 5.3 5.3 5.3 5.3 5.0 5.0 5.0 5.0 5.0 5.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 27 28 6.7 6.7 6.7 6.7 6.7 6.7 5.6 5.6 5.6 5.6 5.6 5.6 5.4 5.4 5.4 5.4 5.4 5.4 5.3 5.3 5.3 5.3 5.3 5.3 5.0 5.0 5.0 5.0 5.0 5.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 33 34 6.7 6.7 6.7 6.7 6.7 6.7 5.6 5.6 5.6 5.6 5.6 5.6 5.4 5.4 5.4 5.4 5.4 5.4 5.3 5.3 5.3 5.3 5.3 5.3 5.0 5.0 5.0 5.0 5.0 5.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35 36 5.3 5.3 4.5 4.5 4.3 4.3 4.2 4.2 4.2 4.2 4.0 4.0 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 41 42 6.7 6.7 6.7 6.7 6.7 6.7 5.6 5.6 5.6 5.6 5.6 5.6 5.4 5.4 5.4 5.4 5.4 5.4 5.3 5.3 5.3 5.3 5.3 5.3 5.0 5.0 5.0 5.0 5.0 5.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 43 44 45 6.0 6.0 6.0 5.1 5.1 5.1 4.9 4.9 4.9 4.8 4.8 4.8 4.7 4.7 4.7 ... 4.0 4.0 ... 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 180 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 7 8 9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 21 22 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 23 24 25 26 27 28 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 29 30 31 32 33 34 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 35 36 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ 37 38 39 40 41 42 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 43 44 45 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 181 ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ Type/Grade Alloy Desig./UNS No. SB–42 SB–75 SB–111 SB–395 ... ... ... ... C12000 C12000 C12000 C12000 H55 H55 H55 H55 pipe tube cond. tube U–bend tube Class/Condition/ Temper 1 2 3 4 ... ... ... ... Smls. Smls. Smls. Smls. 5 6 7 ... ... ... Smls. pipe Smls. tube Smls. cond. tube SB–42 SB–75 SB–111 ... ... ... C12000 C12000 C12000 H80 H80 H80 8 9 10 11 12 ... ... ... ... ... Smls. tube Smls. tube Smls. pipe Finned tube Wld. cond. tube SB–75 SB–75 SB–42 SB–359 SB–543 ... ... ... ... ... C12200 C12200 C12200 C12200 C12200 O50 O60 O61 O61 WO61 13 14 15 16 17 18 ... ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, Plate, SB–152 SB–152 SB–152 SB–152 SB–152 SB–152 ... ... ... ... ... ... C12200 C12200 C12200 C12200 C12200 C12200 H00 H01 H02 H03 H04 O25 19 20 21 22 23 24 ... ... ... ... ... ... Wld. cond. tube Smls. pipe Smls. tube Smls. cond. tube Finned tube Smls. U–bend tube SB–543 SB–42 SB–75 SB–111 SB–359 SB–395 ... ... ... ... ... ... C12200 C12200 C12200 C12200 C12200 C12200 WC55 H55 H55 H55 H55 H55 25 26 27 ... ... ... Smls. pipe Smls. cond. tube Smls. tube SB–42 SB–75 SB–111 ... ... ... C12200 C12200 C12200 H80 H80 H80 28 29 30 31 32 33 ... ... ... ... ... ... Plate, Plate, Plate, Plate, Plate, Plate, SB–152 SB–152 SB–152 SB–152 SB–152 SB–152 ... ... ... ... ... ... C12300 C12300 C12300 C12300 C12300 C12300 H00 H01 H02 H03 H04 O25 34 35 36 37 ... ... ... ... Plate, sheet, strip Smls. cond. tube Smls. U–bend tube Smls. cond. tube SB–152 SB–111 SB–395 SB–111 ... ... ... ... C14200 C14200 C14200 C14200 O25 H55 H55 H80 38 39 40 41 ... ... ... ... Smls. cond. tube Smls. U–bend tube Wld. cond. tube Wld. cond. tube SB–111 SB–395 SB–543 SB–543 ... ... ... ... C19200 C19200 C19400 C19400 O61 O61 WO61 WC55 42 43 44 ... ... ... Smls. pipe Smls. tube Smls. red brass tube SB–43 SB–135 SB–135 ... ... ... C23000 C23000 C23000 H58 O50 O60 sheet, sheet, sheet, sheet, sheet, sheet, sheet, sheet, sheet, sheet, sheet, sheet, strip strip strip strip strip strip strip, strip, strip, strip, strip, strip, bar bar bar bar bar bar 182 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ Product Form Spec. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi 1 2 3 4 2 < NPS ≤ 12 ... <3 <2 31 31 31 31 36 36 36 36 5 6 7 1 /8 < NPS ≤ 2 ... <3 31 31 31 8 9 10 11 12 ... ... ... ... ... 13 14 15 16 17 18 Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) III VIII-1 XII 30 30 30 30 400 400 NP NP 400 400 (Cl. 3 only) 400 400 (Cl. 3 only) 400 400 400 400 400 400 400 400 NFC–6 NFC–6 NFC–6 NFC–6 G1, G1, G9, G9, 45 45 45 40 40 40 400 400 NP 300 350 (Cl. 3 only) 300 400 400 400 400 400 400 NFC–6 NFC–6 NFC–6 G1, G6, G9, T4, W9, W10 G1, G6, G9, T4, W9, W10 G6, G9, T4, W9 31 31 31 31 31 30 30 30 30 30 9 9 9 9 9 NP 400 400 NP NP 300 300 300 300 (Cl. 3 only) 300 (Cl. 3 only) 400 NP 400 400 400 400 NP 400 NP 400 NFC–7 NFC–1 NFC–1 NFC–1 NFC–1 T3 G1, T3, W10 G1, T3, W10 G1, T3, W10 G14, T3, W11 ... ... ... ... ... ... 31 31 31 31 31 31 30 30 30 30 30 30 10 10 10 10 10 10 NP NP NP NP NP NP 300 300 300 300 300 300 400 400 400 400 400 400 400 400 400 400 400 400 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 G33, G33, G33, G33, G33, T2 19 20 21 22 23 24 ... 2 < NPS ≤ 12 ... <3 ... <2 31 31 31 31 31 31 32 36 36 36 36 36 15 30 30 30 30 30 NP 400 400 NP NP NP 300 (Cl. 3 400 400 (Cl. 3 400 300 (Cl. 3 400 (Cl. 3 only) only) 400 400 400 400 400 400 400 400 400 400 NP 400 NFC–1 NFC–6 NFC–6 NFC–6 NFC–6 NFC–6 G14, T4, W3 G1, G9, W9, W10 G1, G9, W9, W10 G9, W9 G1, G9, W9, W10 G9, W9 25 26 27 1 /8 < NPS ≤ 3 <4 <3 31 31 31 45 45 45 40 40 40 400 400 NP 300 350 (Cl. 3 only) 300 400 400 400 400 400 400 NFC–6 NFC–6 NFC–6 G1, G6, G9, T4, W9, W10 G1, G6, G9, T4, W9, W10 G6, G9, T4, W9 28 29 30 31 32 33 ... ... ... ... ... ... 31 31 31 31 31 31 30 30 30 30 30 30 10 10 10 10 10 10 NP NP NP NP NP NP 300 300 300 300 300 300 400 400 400 400 400 400 400 400 400 400 400 400 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 NFC–1 G33, G33, G33, G33, G33, T2 34 35 36 37 ... <3 ... <3 31 31 31 31 30 36 36 45 10 30 30 40 NP NP NP NP 300 (Cl. 3 only) 400 400 (Cl. 3 only) 300 NP 400 400 400 NP 400 400 400 NFC–1 NFC–6 NFC–6 NFC–6 T2 G9, W9 G9, W9 G6, G9, T4, W9 38 39 40 41 <3 ... ... ... 31 31 31 31 38 38 45 45 12 12 15 22 NP NP NP NP NP NP NP 300 (Cl. 3 only) 300 300 400 400 300 300 400 400 NFC–1 NFC–1 NFC–5 NFC–5 ... ... G14, G15, T4 G14, G15, T4 42 43 44 ... ... ... 32 32 32 40 40 40 12 12 12 450 NP NP 300 (Cl. 3 only) 300 (Cl. 3 only) 300 (Cl. 3 only) 450 NP 450 450 NP 450 NFC–1 NFC–1 NFC–1 G1, G33, T3, W10 ... T3 only) only) 183 Notes G9, W9, W10 G9, W9, W10 W9 W9 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I External Pressure Chart No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.0 10.0 10.0 10.0 9.7 9.7 9.7 9.7 9.4 9.4 9.4 9.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.5 12.5 12.5 11.8 11.8 11.8 4.3 4.3 4.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 8 9 10 11 12 6.0 6.0 6.0 6.0 5.1 5.1 5.1 5.1 5.1 4.3 4.9 4.9 4.9 4.9 4.1 4.8 4.8 4.8 4.8 4.1 4.7 4.7 4.7 4.7 4.0 4.0 4.0 4.0 4.0 3.4 3.0 3.0 3.0 3.0 2.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16 17 18 6.7 6.7 6.7 6.7 6.7 6.7 5.6 5.6 5.6 5.6 5.6 5.6 5.4 5.4 5.4 5.4 5.4 5.4 5.3 5.3 5.3 5.3 5.3 5.3 5.0 5.0 5.0 5.0 5.0 5.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 23 24 7.8 10.3 10.3 10.3 10.3 10.3 7.8 10.3 10.3 10.3 10.3 10.3 7.8 10.3 10.3 10.3 10.3 10.3 7.8 10.3 10.3 10.3 10.3 10.3 7.5 10.0 10.0 10.0 10.0 10.0 7.3 9.7 9.7 9.7 9.7 9.7 2.6 9.4 9.4 9.4 9.4 9.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.5 12.5 12.5 11.8 11.8 11.8 4.3 4.3 4.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 31 32 33 6.7 6.7 6.7 6.7 6.7 6.7 5.6 5.6 5.6 5.6 5.6 5.6 5.4 5.4 5.4 5.4 5.4 5.4 5.3 5.3 5.3 5.3 5.3 5.3 5.0 5.0 5.0 5.0 5.0 5.0 4.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 6.7 10.3 10.3 12.9 5.6 10.3 10.3 12.9 5.4 10.3 10.3 12.9 5.3 10.3 10.3 12.9 5.0 10.0 10.0 12.5 ... 9.7 9.7 11.8 ... 9.4 9.4 4.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 8.0 8.0 8.5 10.9 7.1 7.1 8.4 10.9 6.7 6.7 8.3 10.9 6.4 6.4 8.1 10.6 6.2 6.2 7.8 10.1 ... ... 7.6 7.7 ... ... 6.0 6.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 42 43 44 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 7.0 ... 7.0 5.0 ... 5.0 2.0 ... 2.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 184 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 8 9 10 11 12 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16 17 18 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 23 24 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 31 32 33 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 42 43 44 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 185 ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper ... ... ... ... ... ... Smls. pipe Smls. cond. tube Smls. tube Wld. cond. tube Wld. cond. tube Smls. tube SB–43 SB–111 SB–395 SB–543 SB–543 SB–111 ... ... ... ... ... ... C23000 C23000 C23000 C23000 C23000 C28000 O61 O61 O61 WO61 WC55 O61 7 8 9 10 11 12 ... ... ... ... ... ... Plate Plate Plate Plate Plate Plate SB–171 SB–171 SB–171 SB–171 SB–171 SB–171 ... ... ... ... ... ... C36500 C36500 C36500 C36500 C36500 C36500 M20 O25 M20 O25 M20 O25 ð15Þ 13 14 15 16 ... ... ... ... Forgings, brass Forgings, brass Forgings, brass ... SB–283 SB–283 SB–283 ... ... ... ... ... C37700 C37700 C37700 ... M10 M11 O20 ... ð15Þ 17 18 19 20 ... ... ... ... Forgings, brass Forgings, brass Forgings, brass ... SB–283 SB–283 SB–283 ... ... ... ... ... C37700 C37700 C37700 ... M10 M11 O20 ... 21 22 23 24 25 26 ... ... ... ... ... ... Plate Plate Smls. cond. tube Finned tube Smls. U–bend tube Wld. cond. tube SB–171 SB–171 SB–111 SB–359 SB–395 SB–543 ... ... ... ... ... ... C44300 C44300 C44300 C44300 C44300 C44300 M20 O25 O61 O61 O61 WO61 27 28 29 30 31 32 ... ... ... ... ... ... Plate Plate Smls. cond. tube Finned tube Smls. U–bend tube Wld. cond. tube SB–171 SB–171 SB–111 SB–359 SB–395 SB–543 ... ... ... ... ... ... C44400 C44400 C44400 C44400 C44400 C44400 M20 O25 O61 O61 O61 WO61 33 34 35 36 37 38 ... ... ... ... ... ... Plate Plate Smls. cond. tube Finned tube Smls. U–bend tube Wld. cond. tube SB–171 SB–171 SB–111 SB–359 SB–395 SB–543 ... ... ... ... ... ... C44500 C44500 C44500 C44500 C44500 C44500 M20 O25 O61 O61 O61 WO61 39 40 41 42 ... ... ... ... Plate Plate Plate Plate SB–171 SB–171 SB–171 SB–171 ... ... ... ... C46400 C46400 C46400 C46400 M20 O25 M20 O25 ð15Þ 186 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... <3 ... ... ... ... 32 32 32 32 32 32 40 40 40 40 42 50 12 12 12 12 20 20 450 NP NP NP NP 400 300 300 300 300 300 350 (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 only) only) only) only) only) only) 450 450 450 450 450 400 450 450 450 450 450 400 NFC–1 NFC–1 NFC–1 NFC–1 NFC–2 NFC–3 G1, T3, W10 T3 T3 G14, G15, T3 G14, G15, G33, T3 G1, G6, T3, W10 7 8 9 10 11 12 3.5 < t ≤ 5 3.5 < t ≤ 5 2 < t ≤ 3.5 2 < t ≤ 3.5 ≤2 ≤2 32 32 32 32 32 32 40 40 45 45 50 50 12 12 15 15 20 20 NP NP NP NP NP NP 350 350 350 350 350 350 (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 only) only) only) only) only) only) 400 400 400 400 400 400 400 400 400 400 400 400 NFC–2 NFC–2 NFC–2 NFC–2 NFC–2 NFC–2 G7, T4 G7, T4 T4 T4 T3 T3 13 14 15 16 >11/2 >11/2 >11/2 ... ... ... ... ... 46 46 46 ... 15 15 15 ... NP NP NP ... NP NP NP ... 200 200 200 ... 200 200 200 ... NFC–2 NFC–2 NFC–2 ... W14 W14 W14 ... 17 18 19 20 ≤11/2 ≤11/2 ≤11/2 ... ... ... ... ... 50 50 50 ... 18 18 18 ... NP NP NP ... NP NP NP ... 200 200 200 ... 200 200 200 ... NFC–2 NFC–2 NFC–2 ... W14 W14 W14 ... 21 22 23 24 25 26 ≤4 ≤4 <3 ... ... ... 32 32 32 32 32 32 45 45 45 45 45 45 15 15 15 15 15 15 NP NP 450 NP NP NP 350 350 350 350 350 (Cl. 3 (Cl. 3 (Cl. 3 (Cl. 3 (Cl. 3 NP only) only) only) only) only) 450 450 450 450 450 450 450 450 450 NP 450 450 NFC–2 NFC–2 NFC–2 NFC–2 NFC–2 NFC–2 T3 T3 G1, G6, T3, W10 G1, G6, T3, W10 T3 G7, G14, G15, T3 27 28 29 30 31 32 ≤4 ≤4 <3 ... ... ... 32 32 32 32 32 32 45 45 45 45 45 45 15 15 15 15 15 15 NP NP 450 NP NP NP 350 350 350 350 350 (Cl. 3 (Cl. 3 (Cl. 3 (Cl. 3 (Cl. 3 NP only) only) only) only) only) 450 450 450 450 450 450 450 450 450 NP 450 450 NFC–2 NFC–2 NFC–2 NFC–2 NFC–2 NFC–2 T3 T3 G1, G6, T3, W10 G1, G6, T3, W10 T3 G7, G14, G15, T3 33 34 35 36 37 38 ≤4 ≤4 <3 ... ... ... 32 32 32 32 32 32 45 45 45 45 45 45 15 15 15 15 15 15 NP NP 450 NP NP NP 350 350 350 350 350 (Cl. 3 (Cl. 3 (Cl. 3 (Cl. 3 (Cl. 3 NP only) only) only) only) only) 450 450 450 450 450 450 450 450 450 NP 450 450 NFC–2 NFC–2 NFC–2 NFC–2 NFC–2 NFC–2 T3 T3 G1, G6, T3, W10 G1, G6, T3, W10 T3 G7, G14, G15, T3 39 40 41 42 3<t≤5 3<t≤5 ≤3 ≤3 32 32 32 32 50 50 50 50 18 18 20 20 NP NP NP NP 300 300 300 300 (Cl. (Cl. (Cl. (Cl. only) only) only) only) 400 400 400 400 400 400 400 400 NFC–2 NFC–2 NFC–2 NFC–2 T3 T3 T3 T3 3 3 3 3 187 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 8.0 8.0 8.0 6.8 6.8 13.3 8.0 8.0 8.0 6.8 6.8 13.3 8.0 8.0 8.0 6.8 6.8 13.3 8.0 8.0 8.0 6.8 6.8 13.3 8.0 8.0 8.0 6.8 6.8 13.3 7.0 7.0 7.0 6.0 6.0 10.8 5.0 5.0 5.0 4.3 4.3 5.3 2.0 2.0 2.0 1.7 1.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 11 12 8.0 8.0 10.0 10.0 13.3 13.3 8.0 8.0 10.0 10.0 13.3 13.3 8.0 8.0 10.0 10.0 13.3 13.3 8.0 8.0 10.0 10.0 13.3 13.3 8.0 8.0 10.0 10.0 13.3 13.3 8.0 8.0 10.0 10.0 10.8 10.8 5.3 5.3 5.3 5.3 5.3 5.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16 10.0 10.0 10.0 ... 9.4 9.4 9.4 ... 9.0 9.0 9.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 12.0 12.0 12.0 ... 11.3 11.3 11.3 ... 10.8 10.8 10.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 24 25 26 10.0 10.0 10.0 10.0 10.0 8.5 10.0 10.0 10.0 10.0 10.0 8.5 10.0 10.0 10.0 10.0 10.0 8.5 10.0 10.0 10.0 10.0 10.0 8.5 10.0 10.0 10.0 10.0 10.0 8.5 9.8 9.8 9.8 9.8 9.8 8.3 3.5 3.5 3.5 3.5 3.5 3.0 2.0 2.0 2.0 2.0 2.0 1.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 31 32 10.0 10.0 10.0 10.0 10.0 8.5 10.0 10.0 10.0 10.0 10.0 8.5 10.0 10.0 10.0 10.0 10.0 8.5 10.0 10.0 10.0 10.0 10.0 8.5 10.0 10.0 10.0 10.0 10.0 8.5 9.8 9.8 9.8 9.8 9.8 8.3 3.5 3.5 3.5 3.5 3.5 3.0 2.0 2.0 2.0 2.0 2.0 1.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 36 37 38 10.0 10.0 10.0 10.0 10.0 8.5 10.0 10.0 10.0 10.0 10.0 8.5 10.0 10.0 10.0 10.0 10.0 8.5 10.0 10.0 10.0 10.0 10.0 8.5 10.0 10.0 10.0 10.0 10.0 8.5 9.8 9.8 9.8 9.8 9.8 8.3 3.5 3.5 3.5 3.5 3.5 3.0 2.0 2.0 2.0 2.0 2.0 1.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 12.0 12.0 13.3 13.3 12.0 12.0 13.3 13.3 12.0 12.0 13.3 13.3 12.0 12.0 13.3 13.3 12.0 12.0 13.3 13.3 6.3 6.3 6.3 6.3 2.5 2.5 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 188 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 11 12 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ 17 18 19 20 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ 21 22 23 24 25 26 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 31 32 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 36 37 38 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 189 ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper ... ... ... ... ... ... Plate Plate Plate Plate Smls. cond. tube Smls. U–bend tube SB–171 SB–171 SB–171 SB–171 SB–111 SB–395 ... ... ... ... ... ... C46500 C46500 C46500 C46500 C60800 C60800 M20 O25 M20 O25 O61 O61 7 8 9 ... ... ... Plate Plate Plate, sheet SB–171 SB–171 SB–169 ... ... ... C61400 C61400 C61400 M20 O25 O25 or O60 10 11 12 13 ... ... ... ... Plate Plate Plate, sheet Plate, sheet SB–171 SB–171 SB–169 SB–169 ... ... ... ... C61400 C61400 C61400 C61400 M20 O25 O25 or O60 O25 or O60 14 15 16 17 18 19 ... ... ... ... ... ... Plate Plate Plate Plate Plate Plate SB–171 SB–171 SB–171 SB–171 SB–171 SB–171 ... ... ... ... ... ... C63000 C63000 C63000 C63000 C63000 C63000 M20 O25 M20 O25 M20 O25 ð15Þ ð15Þ ð15Þ ð15Þ 20 21 22 23 ... ... ... ... Forgings Forgings Forgings ... SB–283 SB–283 SB–283 ... ... ... ... ... C64200 C64200 C64200 ... M10 M11 O20 ... ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 24 25 26 27 28 29 ... ... ... ... ... ... Forgings Forgings Forgings ... Bar, rod Bar, rod SB–283 SB–283 SB–283 ... SB–98 SB–98 ... ... ... ... ... ... C64200 C64200 C64200 ... C65100 C65100 M10 M11 O20 ... O60 H02 ð15Þ ð15Þ ð15Þ ð15Þ 30 31 32 33 ... ... ... ... Smls. pipe & tube Plate, sheet Bar, rod Bar, rod SB–315 SB–96 SB–98 SB–98 ... ... ... ... C65500 C65500 C65500 C65500 O61 O61 O60 H02 ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 34 35 36 37 38 ... ... ... ... ... Bar, rod Bar, rod Smls. cond. tube Smls. U–bend tube Wld. cond. tube SB–98 SB–98 SB–111 SB–395 SB–543 ... ... ... ... ... C66100 C66100 C68700 C68700 C68700 O60 H02 O61 O61 WO61 39 40 41 ... ... ... Smls. cond. tube Wld. tube Smls. cond. tube SB–111 SB–543 SB–111 ... ... ... C70400 C70400 C70400 O61 WO61 H55 42 43 44 ... ... ... Smls. pipe & tube Wld. pipe Bar, rod SB–466 SB–467 SB–151 ... ... ... C70600 C70600 C70600 O60 WO61 O60 190 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes 3<t≤5 3<t≤5 ≤3 ≤3 ... ... 32 32 32 32 35 35 50 50 50 50 50 50 18 18 20 20 19 19 NP NP NP NP NP NP 300 300 300 300 300 300 only) only) only) only) only) only) 400 400 400 400 500 500 400 400 400 400 500 500 NFC–2 NFC–2 NFC–2 NFC–2 NFC–3 NFC–2 T3 T3 T3 T3 G6, T4 T4 7 8 9 2<t≤5 2<t≤5 2<t≤5 35 35 35 65 65 65 28 28 28 NP NP NP 500 (Cl. 3 only) 500 (Cl. 3 only) 500 (Cl. 3 only) 500 500 500 500 500 500 NFC–8 NFC–8 NFC–8 ... ... ... 10 11 12 13 ≤2 ≤2 1 /2 < t ≤ 2 ≤1/2 35 35 35 35 70 70 70 72 30 30 30 32 NP NP NP NP 500 500 500 450 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 500 500 500 500 500 500 500 500 NFC–8 NFC–8 NFC–8 NFC–8 ... ... ... ... 14 15 16 17 18 19 3.5 < t ≤ 5 3.5 < t ≤ 5 2 < t ≤ 3.5 2 < t ≤ 3.5 ≤2 ≤2 35 35 35 35 35 35 80 80 85 85 90 90 30 30 33 33 36 36 NP NP NP NP NP NP 500 500 500 500 500 500 (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 only) only) only) only) only) only) 700 700 700 700 700 700 650 650 650 650 650 650 NFC–8 NFC–8 NFC–8 NFC–8 NFC–8 NFC–8 T6 T6 T6 T6 T6 T6 20 21 22 23 >11/2 >11/2 >11/2 ... ... ... ... ... 68 68 68 ... 23 23 23 ... NP NP NP ... NP NP NP ... 500 500 500 ... 500 500 500 ... NFC–3 NFC–3 NFC–3 ... G10, T4, W14 G10, T4, W14 G10, T4, W14 ... 24 25 26 27 28 29 ≤11/2 ≤11/2 ≤11/2 ... ... ... ... ... ... ... 33 33 70 70 70 ... 40 55 25 25 25 ... 12 20 NP NP NP ... NP NP NP NP NP ... 300 300 500 500 500 ... 350 350 500 500 500 ... 350 350 NFC–3 NFC–3 NFC–3 ... NFC–1 NFC–2 T4, W14 T4, W14 T4, W14 ... G17 G17, W9 30 31 32 33 ... ≤2 ... ... 33 33 33 33 50 50 52 70 15 18 15 38 NP NP NP NP 300 (Cl. 3 only) 300 (Cl. 3 only) 300 300 400 350 350 350 400 350 350 350 NFC–2 NFC–2 NFC–2 NFC–2 G17, T4 G17, T3 G17 G17, W9 34 35 36 37 38 ... ... <3 ... ... 33 33 32 32 32 52 70 50 50 50 15 38 18 18 18 NP NP NP NP NP 300 300 300 (Cl. 3 only) 300 (Cl. 3 only) NP 350 350 450 450 450 350 350 450 450 450 NFC–2 NFC–2 NFC–2 NFC–2 NFC–2 G17 G17, W9 T3 T3 G14, G15, T3 39 40 41 <3 ... <3 34 34 34 38 38 40 12 12 30 NP NP NP 150 (Cl. 3 only) NP 150 (Cl. 3 only) 150 150 150 150 150 150 NFC–2 NFC–2 NFC–2 ... G14, G15 G7, W9 42 43 44 ... >41/2 ... 34 34 34 38 38 38 13 13 15 NP NP NP 400 450 (Cl. 3 only) 200 600 600 NP 600 600 NP NFC–3 NFC–3 NFC–3 T6 G14, G15, T6 ... (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 191 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 12.0 12.0 13.3 13.3 12.7 12.7 12.0 12.0 13.3 13.3 12.2 12.2 12.0 12.0 13.3 13.3 12.2 12.2 12.0 12.0 13.3 13.3 12.2 12.2 12.0 12.0 13.3 13.3 12.0 12.0 6.3 6.3 6.3 6.3 10.0 10.0 2.5 2.5 2.5 2.5 6.0 6.0 ... ... ... ... 4.0 4.0 ... ... ... ... 2.0 2.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 18.6 18.6 18.6 18.6 18.6 18.6 18.5 18.5 18.5 18.3 18.3 18.3 18.2 18.2 18.2 18.1 18.1 18.1 17.9 17.9 17.9 17.5 17.5 17.5 17.0 17.0 17.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 20.0 20.0 20.0 20.6 19.9 19.9 19.9 20.6 19.8 19.8 19.8 20.6 19.7 19.7 19.7 20.6 19.5 19.5 19.5 20.6 19.4 19.4 19.4 20.6 19.2 19.2 19.2 20.2 18.9 18.9 18.9 19.4 18.3 18.3 18.3 18.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 17 18 19 20.0 20.0 22.0 22.0 24.0 24.0 19.8 19.8 21.8 21.8 23.8 23.8 19.6 19.6 21.5 21.5 23.5 23.5 19.3 19.3 21.2 21.2 23.2 23.2 19.1 19.1 21.0 21.0 22.9 22.9 19.0 19.0 20.9 20.9 22.8 22.8 18.8 18.8 20.7 20.7 22.5 22.5 18.4 18.4 20.2 20.2 22.1 22.1 17.6 17.6 19.4 19.4 21.1 21.1 16.0 16.0 16.0 16.0 16.0 16.0 12.0 12.0 12.0 12.0 12.0 12.0 8.6 8.6 8.6 8.6 8.6 8.6 6.0 6.0 6.0 6.0 6.0 6.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 15.3 15.3 15.3 ... 13.5 13.5 13.5 ... 13.0 13.0 13.0 ... 12.5 12.5 12.5 ... 12.5 12.5 12.5 ... 12.0 12.0 12.0 ... 11.0 11.0 11.0 ... 7.5 7.5 7.5 ... 5.2 5.2 5.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 28 29 16.7 16.7 16.7 ... 8.0 13.3 14.5 14.5 14.5 ... 7.9 13.3 14.0 14.0 14.0 ... 7.9 13.2 13.5 13.5 13.5 ... 7.8 12.9 13.5 13.5 13.5 ... 7.8 12.5 13.0 13.0 13.0 ... 7.7 12.0 11.0 11.0 11.0 ... ... ... 7.5 7.5 7.5 ... ... ... 5.2 5.2 5.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 33 10.0 12.0 10.0 20.0 10.0 12.0 10.0 20.0 9.9 11.9 9.9 20.0 9.9 11.9 9.9 20.0 9.9 11.9 9.9 20.0 9.8 10.7 9.8 20.0 6.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 38 10.0 20.0 12.0 12.0 10.2 10.0 20.0 11.9 11.9 10.1 9.9 20.0 11.8 11.8 10.0 9.9 20.0 11.7 11.7 9.9 9.9 20.0 11.7 11.7 9.9 9.8 20.0 6.5 6.5 5.5 ... ... 3.3 3.3 2.7 ... ... 1.8 1.8 1.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 8.0 6.8 11.4 8.0 6.8 11.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 42 43 44 8.7 7.4 10.0 8.4 7.2 9.7 8.2 7.0 9.5 8.0 6.8 ... 7.8 6.7 ... 7.7 6.5 ... 7.5 6.4 ... 7.4 6.3 ... 7.3 6.2 ... 7.0 5.7 ... 6.0 4.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 192 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ 24 25 26 27 28 29 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 30 31 32 33 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ 34 35 36 37 38 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 39 40 41 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 42 43 44 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 193 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper ... ... ... Plate Plate, sheet Plate SB–171 SB–171 SB–171 ... ... ... C70600 C70600 C70600 M20 M20 M20 4 5 6 ... ... ... Plate Plate, sheet Plate SB–171 SB–171 SB–171 ... ... ... C70600 C70600 C70600 O25 O25 O25 7 8 9 10 ... ... ... ... Smls. cond. tube Smls. cond. tube Finned tube Smls. U–bend tube SB–111 SB–111 SB–359 SB–395 ... ... ... ... C70600 C70600 C70600 C70600 O61 O61 O61 O61 ð15Þ ð15Þ ð15Þ 11 12 13 ... ... ... Wld. pipe Wld. tube Finned wld. tube SB–467 SB–543 SB–956 ... ... ... C70600 C70600 C70600 WO61 WO61 WO61 ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 14 15 16 17 18 19 ... ... ... ... ... ... Wld. pipe Smls. tube Smls. pipe & tube Wld. tube Finned wld. tube Wld. pipe SB–467 SB–111 SB–466 SB–543 SB–956 SB–467 ... ... ... ... ... ... C70600 C70600 C70600 C70600 C70600 C70600 WM50 H55 H55 WC55 WC55 Wld. fr. cold rld. strip 20 21 22 23 ... ... ... ... Smls. tube Smls. cond. tube Finned tube Smls. tube SB–466 SB–111 SB–359 SB–395 ... ... ... ... C71000 C71000 C71000 C71000 O60 O61 O61 O61 24 25 26 ... ... ... Wld. pipe Plate, sheet Plate, sheet SB–467 SB–171 SB–171 ... ... ... C71500 C71500 C71500 WO61 M20 O25 27 28 29 ... ... ... Plate, sheet Plate, sheet Wld. pipe SB–171 SB–171 SB–467 ... ... ... C71500 C71500 C71500 M20 O25 WO61 30 31 32 33 ... ... ... ... Smls. pipe & tube Smls. cond. tube Finned tube Smls. U–bend tube SB–466 SB–111 SB–359 SB–395 ... ... ... ... C71500 C71500 C71500 C71500 O60 O61 O61 O61 34 35 36 37 ... ... ... ... Wld. cond. tube Finned wld. cond. tube Smls. cond. tube Smls. U–bend tube SB–543 SB–956 SB–111 SB–395 ... ... ... ... C71500 C71500 C71500 C71500 WO61 WO61 HR50 HR58 38 39 40 41 ... ... ... ... Smls. cond. tube Castings Castings Castings SB–111 SB–62 SB–61 SB–584 ... ... ... ... C72200 C83600 C92200 C92200 O61 M01 M01 M01 194 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ≤5 ≤5 ≤5 34 34 34 40 40 40 15 15 15 NP NP NP 400 450 (Cl. 3 only) NP NP NP 600 NP NP 600 NFC–3 NFC–3 NFC–3 ... ... T5 4 5 6 ≤5 ≤5 ≤5 34 34 34 40 40 40 15 15 15 NP NP NP 400 450 (Cl. 3 only) NP NP NP 600 NP NP 600 NFC–3 NFC–3 NFC–3 ... ... T5 7 8 9 10 ... ... ... ... 34 34 34 34 40 40 40 40 15 15 15 15 600 NP NP NP 400 450 (Cl. 3 only) 450 (Cl. 3 only) 450 (Cl. 3 only) NP 600 600 600 NP 600 NP 600 NFC–3 NFC–3 NFC–3 NFC–3 G1, T5, W10 T5 G1, T5, W10 T5 11 12 13 ≤41/2 ... ... 34 34 34 40 40 40 15 15 15 NP NP NP 450 (Cl. 3 only) 450 (Cl. 3 only) NP 600 600 600 600 600 NP NFC–3 NFC–3 NFC–3 G14, G15, T5 G14, G15, T5 G14, T5 14 15 16 17 18 19 ≤41/2 ... ... ... ... ≤41/2 34 34 34 34 34 34 45 45 45 45 45 54 30 35 35 35 35 45 NP NP NP NP NP NP NP 450 (Cl. 3 only) NP 450 (Cl. 3 only) NP NP 600 600 600 600 600 600 600 600 NP 600 NP 600 NFC–3 NFC–3 NFC–3 NFC–3 NFC–3 NFC–3 G14, G33, G33, G14, G14, G14, 20 21 22 23 ... ... ... ... 34 34 34 34 45 45 45 45 16 16 16 16 NP 700 NP NP 700 700 700 700 only) only) only) only) 700 700 700 700 650 650 NP 650 NFC–3 NFC–3 NFC–3 NFC–3 T7 G1, T7, W10 G1, T7, W10 T7 24 25 26 >41/2 2.5 < t ≤ 5 2.5 < t ≤ 5 34 34 34 45 45 45 15 18 18 NP NP NP 600 (Cl. 3 only) 700 700 NP 700 700 NP 650 650 NFC–3 NFC–4 NFC–4 G14 ... ... 27 28 29 ≤2.5 ≤2.5 ≤41/2 34 34 34 50 50 50 20 20 20 NP NP NP 700 700 600 (Cl. 3 only) 700 700 NP 650 650 NP NFC–4 NFC–4 NFC–4 ... ... G14 30 31 32 33 ... ... ... ... 34 34 34 34 52 52 52 52 18 18 18 18 NP 700 NP NP 700 700 700 (Cl. 3 only) 700 (Cl. 3 only) 700 700 700 700 650 650 NP 650 NFC–4 NFC–4 NFC–4 NFC–4 ... G1, W10 G1, W10 ... 34 35 36 37 ... ... ≤31/8 ... 34 34 34 34 52 52 72 72 18 18 50 50 NP NP NP NP 600 (Cl. 3 only) NP 700 700 600 600 800 800 600 NP 650 650 NFC–4 NFC–4 NFC–4 NFC–8 G14, G15 G14 T9, W9 T9, W9 38 39 40 41 ≤2 ... ... ... 34 ... ... ... 45 30 34 34 16 14 16 16 NP 450 550 NP NP 450 (Cl. 3 only) 500 (Cl. 3 only) 500 (Cl. 3 only) 150 450 550 550 150 450 550 550 NFC–3 NFC–1 NFN–1 NFN–1 ... G1, G3, G15, W10, W14 G1, G3, G15, T6, W10, W14 G15, T6 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 195 T5 T5 T5 G15, G33, T5 G33, T5 T5 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 10.0 10.0 10.0 9.7 9.7 9.7 9.5 9.5 9.5 9.3 9.3 9.3 9.0 9.0 9.0 8.8 8.8 8.8 8.7 8.7 8.7 ... 8.5 8.5 ... ... 8.0 ... ... 7.0 ... ... 6.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 10.0 10.0 10.0 9.7 9.7 9.7 9.5 9.5 9.5 9.3 9.3 9.3 9.0 9.0 9.0 8.8 8.8 8.8 8.7 8.7 8.7 ... 8.5 8.5 ... ... 8.0 ... ... 7.0 ... ... 6.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 10.0 10.0 10.0 10.0 9.7 9.7 9.7 9.7 9.5 9.5 9.5 9.5 9.3 9.3 9.3 9.3 9.0 9.0 9.0 9.0 8.8 8.8 8.8 8.8 8.7 8.7 8.7 8.7 8.5 8.5 8.5 8.5 8.0 8.0 8.0 8.0 7.0 7.0 7.0 7.0 6.0 6.0 6.0 6.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 8.5 8.5 8.5 8.3 8.3 8.3 8.1 8.1 8.1 7.9 7.9 7.9 7.7 7.7 7.7 7.5 7.5 7.5 7.4 7.4 7.4 7.2 7.2 7.2 6.3 6.3 6.3 5.7 5.7 5.7 4.3 4.3 4.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 17 18 19 8.5 10.0 10.0 8.5 8.5 8.5 8.3 9.7 9.7 8.3 8.3 8.3 8.1 9.5 9.5 8.1 8.1 8.1 7.9 9.3 9.3 7.9 7.9 7.9 7.7 9.0 9.0 7.7 7.7 7.7 7.5 8.8 8.8 7.5 7.5 7.5 7.4 8.7 8.7 7.4 7.4 7.4 7.2 8.5 8.5 7.2 7.2 7.2 6.3 8.0 8.0 6.3 6.3 6.3 5.7 7.0 7.0 5.7 5.7 5.7 4.3 6.0 6.0 4.3 4.3 4.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 10.7 10.7 10.7 10.7 10.6 10.6 10.6 10.6 10.5 10.5 10.5 10.5 10.4 10.4 10.4 10.4 10.2 10.2 10.2 10.2 10.1 10.1 10.1 10.1 9.9 9.9 9.9 9.9 9.6 9.6 9.6 9.6 9.3 9.3 9.3 9.3 8.9 8.9 8.9 8.9 8.4 8.4 8.4 8.4 7.7 7.7 7.7 7.7 7.0 7.0 7.0 7.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 8.5 12.0 12.0 8.2 11.6 11.6 8.0 11.3 11.3 7.8 11.0 11.0 7.6 10.8 10.8 7.5 10.5 10.5 7.3 10.3 10.3 7.2 10.1 10.1 7.0 9.9 9.9 6.9 9.8 9.8 6.8 9.6 9.6 ... 9.5 9.5 ... 9.4 9.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 13.3 13.3 11.3 12.9 12.9 10.9 12.6 12.6 10.7 12.3 12.3 10.4 12.0 12.0 10.2 11.7 11.7 10.0 11.5 11.5 9.7 11.2 11.2 9.6 11.0 11.0 9.4 10.8 10.8 9.2 10.7 10.7 9.1 10.6 10.6 ... 10.4 10.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 33 12.0 12.0 12.0 12.0 11.6 11.6 11.6 11.6 11.3 11.3 11.3 11.3 11.0 11.0 11.0 11.0 10.8 10.8 10.8 10.8 10.5 10.5 10.5 10.5 10.3 10.3 10.3 10.3 10.1 10.1 10.1 10.1 9.9 9.9 9.9 9.9 9.8 9.8 9.8 9.8 9.6 9.6 9.6 9.6 9.5 9.5 9.5 9.5 9.4 9.4 9.4 9.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 10.2 10.2 20.6 20.6 9.8 9.8 20.6 20.6 9.6 9.6 20.6 20.6 9.4 9.4 20.6 20.6 9.2 9.2 20.6 20.6 9.0 9.0 20.2 20.2 8.8 8.8 19.7 19.7 8.6 8.6 19.2 19.2 8.4 8.4 18.9 18.9 8.3 8.3 18.6 18.6 8.2 8.2 18.5 18.5 ... ... 18.3 18.3 ... ... 17.9 17.9 ... ... 17.2 17.2 ... ... 8.5 8.5 ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 10.7 8.6 9.7 9.7 10.4 8.6 9.7 9.7 ... 8.6 9.7 9.7 ... 8.6 9.7 9.7 ... 8.3 9.7 9.7 ... 8.1 9.7 9.7 ... 6.9 8.2 8.2 ... 6.8 7.7 7.7 ... ... 7.2 7.2 ... ... 5.0 5.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 196 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ 14 15 16 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 20 21 22 23 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 33 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 197 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper ... ... ... ... Castings Castings Castings Castings SB–584 SB–148 SB–271 SB–505 ... ... ... ... C93700 C95200 C95200 C95200 M01 M01 M02 M07 5 6 7 8 ... ... ... ... Castings Castings Castings Castings SB–148 SB–271 SB–369 SB–584 ... ... ... ... C95400 C95400 C96200 C97600 M01 M02 M01 M01 9 10 11 12 13 14 99Ni 99Ni 99Ni 99Ni 99Ni 99Ni Smls. pipe & tube Smls. & wld. fittings Bar, rod Smls. pipe & tube Plate, sheet, strip Smls. tube SB–161 SB–366 SB–160 SB–161 SB–162 SB–163 ... ... ... ... ... ... N02200 N02200 N02200 N02200 N02200 N02200 Annealed Annealed Annealed Annealed Annealed Annealed 15 16 17 18 99Ni 99Ni 99Ni 99Ni Plate, sheet, strip Bar, rod Smls. pipe & tube Smls. tube SB–162 SB–160 SB–161 SB–163 ... ... ... ... N02200 N02200 N02200 N02200 As rolled Hot rolled Stress rel. Stress rel. 19 20 21 99Ni–Low C 99Ni–Low C 99Ni–Low C Smls. pipe & tube Smls. & wld. fittings Bar, rod SB–161 SB–366 SB–160 ... ... ... N02201 N02201 N02201 Annealed Annealed Hot rolled/ann. 22 23 24 25 26 99Ni–Low 99Ni–Low 99Ni–Low 99Ni–Low 99Ni–Low Smls. pipe & tube Smls. tube Plate, sheet, strip Smls. pipe & tube Smls. pipe & tube SB–161 SB–163 SB–162 SB–161 SB–163 ... ... ... ... ... N02201 N02201 N02201 N02201 N02201 Annealed Annealed Hot rolled/ann. Stress rel. Stress rel. 27 28 29 67Ni–30Cu 67Ni–30Cu 67Ni–30Cu Bar Smls. pipe & tube Forgings SB–164 SB–165 SB–564 ... ... ... N04400 N04400 N04400 Annealed Annealed Annealed 30 31 32 33 67Ni–30Cu 67Ni–30Cu 67Ni–30Cu 67Ni–30Cu Plate Smls. tube Smls. pipe & tube Smls. & wld. fittings SB–127 SB–163 SB–165 SB–366 ... ... ... ... N04400 N04400 N04400 N04400 Annealed Annealed Annealed Annealed 34 35 36 67Ni–30Cu 67Ni–30Cu 67Ni–30Cu Bar Plate Bar, rod SB–164 SB–127 SB–164 ... ... ... N04400 N04400 N04400 Hot worked As rolled Hot worked 37 38 39 67Ni–30Cu 67Ni–30Cu 67Ni–30Cu Bar, rod Smls. tube Smls. pipe & tube SB–164 SB–163 SB–165 ... ... ... N04400 N04400 N04400 Hot worked Stress rel. Stress rel. 40 41 67Ni–30Cu–S 67Ni–30Cu–S Bar Bar SB–164 SB–164 ... ... N04405 N04405 Annealed Hot worked C C C C C 198 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... ... ... 35 35 35 30 65 65 68 12 25 25 26 NP 550 NP NP 400 (SPT) 500 (Cl. 3 only) 500 (Cl. 3 only) 500 (Cl. 3 only) 400 600 600 NP 400 600 600 NP NFC–1 NFC–4 NFC–4 NFC–4 G15, W15 G15, T6 G15, T6 G15 5 6 7 8 ... ... ... ... 35 35 34 ... 75 75 45 40 30 30 25 17 550 NP NP NP 450 (Cl. 3 only) 450 (Cl. 3 only) 200 (Cl. 3 only) NP 600 NP NP 300 600 NP NP 300 NFC–4 NFC–4 NFC–4 NFC–1 G15, T5, W8 G15, W8 G15 G15, W15 9 10 11 12 13 14 >5 O.D. ... ... ≤5 O.D. ... ... 41 41 41 41 41 41 55 55 55 55 55 55 12 12 15 15 15 15 NP NP NP NP NP NP 600 (Cl. 3 NP 600 (Cl. 3 600 (Cl. 3 600 (Cl. 3 600 (Cl. 3 only) only) only) only) only) 600 600 600 600 600 600 600 600 600 600 600 600 NFN–2 NFN–2 NFN–2 NFN–2 NFN–2 NFN–2 ... W12 ... ... ... ... 15 16 17 18 ... ... ... ... 41 41 41 41 55 60 65 65 20 15 40 40 NP NP NP NP 600 600 600 600 only) only) only) only) 600 600 600 600 600 600 600 600 NFN–2 NFN–2 NFN–25 NFN–25 G20 ... G29 G29 19 20 21 >5 O.D. ... ... 41 41 41 50 50 50 10 10 10 NP NP NP 800 (Cl. 3 only) NP 800 (Cl. 3 only) 1200 1150 1200 650 650 650 NFN–1 NFN–1 NFN–1 T10 T10, W12 T10 22 23 24 25 26 ≤5 O.D. ... ... ... ... 41 41 41 41 41 50 50 50 60 60 12 12 12 30 30 NP NP NP NP NP 800 800 800 600 800 1200 1200 1200 600 900 650 650 650 600 650 NFN–1 NFN–1 NFN–1 NFN–1 NFN–1 T9 T9 T9 ... ... 27 28 29 ... >5 O.D. ... 42 42 42 70 70 70 25 25 25 NP NP NP 800 800 800 900 900 900 650 650 650 NFN–3 NFN–3 NFN–3 T10 T10 T10 30 31 32 33 ... ≤3 ≤5 O.D. ... 42 42 42 42 70 70 70 70 28 28 28 28 NP NP NP NP 800 800 800 NP 900 900 900 900 650 650 650 650 NFN–3 NFN–3 NFN–3 NFN–3 T10 T10 T10 T10, W12 34 35 36 ... ... ... 42 42 42 75 75 75 30 40 40 NP NP NP 800 800 NP 900 900 900 650 650 650 NFN–3 NFN–3 NFN–3 T9 G12, G20, T9 T9 37 38 39 ... ... ... 42 42 42 80 85 85 40 55 55 NP NP NP 800 (Cl. 3 only) 800 800 900 800 500 650 650 500 NFN–3 NFN–3 NFN–3 T9 G11, T8 G5, G21, T8 40 41 ... ... 42 42 70 75 25 35 NP NP 800 800 900 900 650 650 NFN–3 NFN–3 T10 T10 (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 3 3 3 only) only) only) only) only) 199 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 8.0 16.7 16.7 17.3 7.4 15.7 15.7 16.3 6.9 15.2 15.2 15.8 6.6 14.8 14.8 15.4 6.6 14.5 14.5 15.1 6.5 14.3 14.3 14.9 6.4 14.2 14.2 14.8 ... 14.2 14.2 14.7 ... 14.2 14.2 14.7 ... 11.7 11.7 ... ... 7.4 7.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 20.0 20.0 9.5 7.5 19.0 19.0 9.5 7.2 18.7 18.7 9.2 7.0 18.5 18.5 ... 6.9 18.5 18.5 ... 6.7 18.5 18.5 ... ... 18.5 18.5 ... ... 16.0 16.0 ... ... 13.9 ... ... ... 11.0 ... ... ... 8.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 13 14 8.0 8.0 10.0 10.0 10.0 10.0 ... ... ... ... ... ... 8.0 8.0 10.0 10.0 10.0 10.0 ... ... ... ... ... ... 8.0 8.0 10.0 10.0 10.0 10.0 ... ... ... ... ... ... 8.0 8.0 10.0 10.0 10.0 10.0 ... ... ... ... ... ... 8.0 8.0 10.0 10.0 10.0 10.0 ... ... ... ... ... ... 8.0 8.0 10.0 10.0 10.0 10.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 13.3 10.0 18.6 18.6 ... ... ... ... 13.3 10.0 18.6 18.6 ... ... ... ... 13.3 10.0 18.6 18.6 ... ... ... ... 13.3 10.0 18.6 18.6 ... ... ... ... 12.6 10.0 18.3 18.3 ... ... ... ... 11.5 10.0 17.7 17.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 6.7 6.7 6.7 ... ... ... 6.4 6.4 6.4 ... ... ... 6.3 6.3 6.3 ... ... ... 6.2 6.2 6.2 ... ... ... 6.2 6.2 6.2 ... ... ... 6.2 6.2 6.2 6.2 6.2 6.2 6.2 6.2 6.2 6.1 6.1 6.1 6.0 6.0 6.0 5.8 5.8 5.8 4.5 4.5 4.5 3.7 3.7 3.7 22 23 24 25 26 8.0 8.0 8.0 17.1 17.1 ... ... ... ... ... 7.7 7.7 7.7 17.1 17.1 ... ... ... ... ... 7.5 7.5 7.5 17.0 17.0 ... ... ... ... ... 7.5 7.5 7.5 17.0 17.0 ... ... ... ... ... 7.5 7.5 7.5 16.8 16.8 ... ... ... ... ... 7.5 7.5 7.5 16.3 16.3 7.5 7.5 7.5 ... 14.0 7.4 7.4 7.4 ... 13.4 7.4 7.4 7.4 ... 12.8 7.2 7.2 7.2 ... 12.1 5.8 5.8 5.8 ... 11.7 4.5 4.5 4.5 ... 11.1 3.7 3.7 3.7 ... ... 27 28 29 16.7 16.7 16.7 ... ... ... 14.6 14.6 14.6 ... ... ... 13.6 13.6 13.6 ... ... ... 13.2 13.2 13.2 ... ... ... 13.1 13.1 13.1 ... ... ... 13.1 13.1 13.1 13.1 13.1 13.1 13.0 13.0 13.0 12.9 12.9 12.9 12.7 12.7 12.7 11.0 11.0 11.0 8.0 8.0 8.0 ... ... ... 30 31 32 33 18.7 18.7 18.7 18.7 ... ... ... ... 16.4 16.4 16.4 16.4 ... ... ... ... 15.2 15.2 15.2 15.2 ... ... ... ... 14.7 14.7 14.7 14.7 ... ... ... ... 14.7 14.7 14.7 14.7 ... ... ... ... 14.7 14.7 14.7 14.7 14.7 14.7 14.7 14.7 14.6 14.6 14.6 14.6 14.5 14.5 14.5 14.5 14.3 14.3 14.3 14.3 11.0 11.0 11.0 11.0 8.0 8.0 8.0 8.0 ... ... ... ... 34 35 36 20.0 21.4 21.4 ... ... ... 19.4 21.4 21.4 ... ... ... 18.6 21.4 21.4 ... ... ... 17.9 21.4 21.4 ... ... ... 17.6 21.4 21.4 ... ... ... 17.3 21.4 21.4 17.2 21.4 21.4 17.0 20.7 20.7 16.8 18.5 18.5 14.5 14.5 14.5 8.5 8.5 8.5 4.0 4.0 4.0 ... ... ... 37 38 39 22.9 24.3 24.3 ... ... ... 22.9 24.3 24.3 ... ... ... 22.9 24.3 24.3 ... ... ... 22.9 24.3 24.3 ... ... ... 22.9 24.3 24.3 ... ... ... 22.9 23.9 23.9 22.8 23.5 23.5 22.0 22.8 22.8 18.5 18.0 18.0 14.5 12.7 12.7 8.5 ... ... 4.0 ... ... ... ... ... 40 41 16.7 21.4 ... ... 14.6 21.4 ... ... 13.6 21.4 ... ... 13.2 20.9 ... ... 13.1 20.5 ... ... 13.1 20.2 13.1 20.1 13.0 19.8 12.9 18.5 12.7 14.5 11.0 8.5 8.0 4.0 ... ... 200 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 13 14 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 3.0 3.0 3.0 2.4 2.4 2.4 2.0 2.0 2.0 1.5 1.5 1.5 1.2 ... 1.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 26 3.0 3.0 3.0 ... ... 2.4 2.4 2.4 ... ... 2.0 2.0 2.0 ... ... 1.5 1.5 1.5 ... ... 1.2 1.2 1.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 33 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 40 41 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 201 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 1 2 3 4 47Ni–22Cr–9Mo–18Fe 47Ni–22Cr–9Mo–18Fe 47Ni–22Cr–9Mo–18Fe 47Ni–22Cr–9Mo–18Fe Plate, sheet, strip Plate, sheet, strip Rod Rod SB–435 SB–435 SB–572 SB–572 ... ... ... ... N06002 N06002 N06002 N06002 Annealed Annealed Annealed Annealed 5 6 7 47Ni–22Cr–9Mo–18Fe 47Ni–22Cr–9Mo–18Fe 47Ni–22Cr–9Mo–18Fe Smls. & wld. fittings Wld. pipe Wld. pipe SB–366 SB–619 SB–619 ... ... ... N06002 N06002 N06002 Annealed Solution ann. Solution ann. 8 9 10 11 47Ni–22Cr–9Mo–18Fe 47Ni–22Cr–9Mo–18Fe 47Ni–22Cr–9Mo–18Fe 47Ni–22Cr–9Mo–18Fe Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–622 SB–622 SB–626 SB–626 ... ... ... ... N06002 N06002 N06002 N06002 Solution Solution Solution Solution ann. ann. ann. ann. 12 13 14 15 47Ni–22Cr–19Fe–6Mo 47Ni–22Cr–19Fe–6Mo 47Ni–22Cr–19Fe–6Mo 47Ni–22Cr–19Fe–6Mo Rod Rod Plate, sheet, strip Plate, sheet, strip SB–581 SB–581 SB–582 SB–582 ... ... ... ... N06007 N06007 N06007 N06007 Solution Solution Solution Solution ann. ann. ann. ann. 16 17 18 19 20 47Ni–22Cr–19Fe–6Mo 47Ni–22Cr–19Fe–6Mo 47Ni–22Cr–19Fe–6Mo 47Ni–22Cr–19Fe–6Mo 47Ni–22Cr–19Fe–6Mo Smls. & wld. fittings Rod Rod Plate, sheet, strip Plate, sheet, strip SB–366 SB–581 SB–581 SB–582 SB–582 ... ... ... ... ... N06007 N06007 N06007 N06007 N06007 Annealed Solution ann. Solution ann. Solution ann. Solution ann. 21 22 23 24 25 26 47Ni–22Cr–19Fe–6Mo 47Ni–22Cr–19Fe–6Mo 47Ni–22Cr–19Fe–6Mo 47Ni–22Cr–19Fe–6Mo 47Ni–22Cr–19Fe–6Mo 47Ni–22Cr–19Fe–6Mo Wld. pipe Wld. pipe Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–619 SB–619 SB–622 SB–622 SB–626 SB–626 ... ... ... ... ... ... N06007 N06007 N06007 N06007 N06007 N06007 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 27 28 29 30 31 55Ni–21Cr–13.5Mo 55Ni–21Cr–13.5Mo 55Ni–21Cr–13.5Mo 55Ni–21Cr–13.5Mo 55Ni–21Cr–13.5Mo Smls. & wld. fittings Forgings Forgings Forgings Forgings SB–366 SB–462 SB–462 SB–564 SB–564 ... ... ... ... ... N06022 N06022 N06022 N06022 N06022 Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. 32 33 34 35 55Ni–21Cr–13.5Mo 55Ni–21Cr–13.5Mo 55Ni–21Cr–13.5Mo 55Ni–21Cr–13.5Mo Rod Rod Plate, sheet, strip Plate, sheet, strip SB–574 SB–574 SB–575 SB–575 ... ... ... ... N06022 N06022 N06022 N06022 Solution Solution Solution Solution ann. ann. ann. ann. 36 37 38 39 40 41 55Ni–21Cr–13.5Mo 55Ni–21Cr–13.5Mo 55Ni–21Cr–13.5Mo 55Ni–21Cr–13.5Mo 55Ni–21Cr–13.5Mo 55Ni–21Cr–13.5Mo Wld. pipe Wld. pipe Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–619 SB–619 SB–622 SB–622 SB–626 SB–626 ... ... ... ... ... ... N06022 N06022 N06022 N06022 N06022 N06022 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 42 43 44 45 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al Smls. tube Smls. tube Plate, sheet, strip Plate, sheet, strip SB–163 SB–163 SB–168 SB–168 ... ... ... ... N06025 N06025 N06025 N06025 Annealed Annealed Annealed Annealed 202 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. ð15Þ ð15Þ ð15Þ ð15Þ Product Form Spec. No. Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... ... 43 43 43 43 95 95 95 95 35 35 35 35 NP NP NP NP 800 NP 800 NP 1650 1650 1650 1650 650 650 650 650 NFN–15 NFN–15 NFN–15 NFN–15 G4, G4, G4, G4, 5 6 7 ... ... ... 43 43 43 100 100 100 40 40 40 NP NP NP NP 800 NP 1650 1650 1650 650 650 650 NFN–15 NFN–15 NFN–15 G4, G5, T15, W12 G4, G5, G14, T14, W5 G4, G14, T16 8 9 10 11 ... ... ... ... 43 43 43 43 100 100 100 100 40 40 40 40 NP NP NP NP 800 NP 800 NP 1650 1650 1650 1650 650 650 650 650 NFN–15 NFN–15 NFN–15 NFN–15 G4, G4, G4, G4, 12 13 14 15 >3/4 >3/4 >3/4 >3/4 45 45 45 45 85 85 85 85 30 30 30 30 NP NP NP NP NP NP NP NP 1000 1000 1000 1000 650 650 650 650 NFN–11 NFN–11 NFN–11 NFN–11 ... G5 ... G5 16 17 18 19 20 ... ≤3/4 ≤3/4 ≤3/4 ≤3/4 45 45 45 45 45 90 90 90 90 90 35 35 35 35 35 NP NP NP NP NP NP NP NP NP NP 1000 1000 1000 1000 1000 650 650 650 650 650 NFN–11 NFN–11 NFN–11 NFN–11 NFN–11 G5, W12 ... G5 ... G5 21 22 23 24 25 26 ... ... ... ... ... ... 45 45 45 45 45 45 90 90 90 90 90 90 35 35 35 35 35 35 NP NP NP NP NP NP NP NP NP NP NP NP 1000 1000 1000 1000 1000 1000 650 650 650 650 650 650 NFN–11 NFN–11 NFN–11 NFN–11 NFN–11 NFN–11 G14 G5, G14 ... G5 G14 G5, G14 27 28 29 30 31 ... ... ... ... ... 43 43 43 43 43 100 100 100 100 100 45 45 45 45 45 1250 1250 1250 1250 1250 NP NP NP 800 NP 1250 1250 1250 1250 1250 650 NP NP 650 650 NFN–10 NFN–10 NFN–10 NFN–10 NFN–10 G5, G27, G28, T15, W12 G5, G27, G28, T15 G27, G28, T15 G5, G27, G28, T15 G27, G28, T15 32 33 34 35 ... ... ... ... 43 43 43 43 100 100 100 100 45 45 45 45 1250 1250 1250 1250 800 NP 800 NP 1250 1250 1250 1250 650 650 650 650 NFN–10 NFN–10 NFN–10 NFN–10 G5, G27, G28, T15 G27, G28, T15 G5, G27, G28, T15 G27, G28, T15 36 37 38 39 40 41 ... ... ... ... ... ... 43 43 43 43 43 43 100 100 100 100 100 100 45 45 45 45 45 45 1250 1250 1250 1250 1250 1250 800 NP 800 NP 800 NP 1250 1250 1250 1250 1250 1250 650 650 650 650 650 650 NFN–10 NFN–10 NFN–10 NFN–10 NFN–10 NFN–10 G5, G14, G27, G28, T15, W6 G14, G27, G28, T15 G5, G27, G28, T15 G27, G28, T15 G5, G14, G27, G28, T15, W6 G14, G27, G28, T15 42 43 44 45 ... ... ... ... 43 43 43 43 98 98 98 98 39 39 39 39 1650 1650 1650 1650 NP NP NP NP 1800 1800 1800 1800 NP NP NP NP NFN–13 NFN–13 NFN–13 NFN–13 G4, G4, G4, G4, 203 G5, T15 T16 G5, G13, T15 G13, T16 G5, T14 T16 G5, G14, T14, W5 G14, T16 G5, G30, G31, G32, T12 G30, G31, G32, T13 G5, G30, G31, G32, T12 G30, G31, G32, T13 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 23.3 23.3 23.3 23.3 ... ... ... ... 23.3 21.0 23.3 21.0 ... ... ... ... 23.3 19.2 23.3 19.2 ... ... ... ... 23.3 17.7 23.3 17.7 ... ... ... ... 22.3 16.5 22.3 16.5 ... ... ... ... 21.2 15.7 21.2 15.7 20.7 15.3 20.7 15.3 20.3 15.1 20.3 15.1 20.1 14.9 20.1 14.9 19.9 14.7 19.9 14.7 19.7 14.6 19.7 14.6 19.6 14.5 19.6 14.5 19.5 14.4 19.5 14.4 5 6 7 26.7 22.7 22.7 ... ... ... 26.7 22.7 20.4 ... ... ... 26.7 22.7 18.7 ... ... ... 26.7 22.7 17.2 ... ... ... 25.5 21.7 16.1 ... ... ... 24.2 20.5 15.2 ... 20.1 14.9 23.3 19.8 14.6 ... 19.5 14.4 22.7 19.3 14.3 ... 19.1 14.2 22.4 19.0 14.1 ... 18.9 14.0 8 9 10 11 26.7 26.7 22.7 22.7 ... ... ... ... 26.7 24.0 22.7 20.4 ... ... ... ... 26.7 22.0 22.7 18.7 ... ... ... ... 26.7 20.3 22.7 17.2 ... ... ... ... 25.5 18.9 21.7 16.1 ... ... ... ... 24.2 17.9 20.5 15.2 23.7 17.5 20.1 14.9 23.3 17.2 19.8 14.6 22.9 17.0 19.5 14.4 22.7 16.8 19.3 14.3 22.5 16.7 19.1 14.2 22.4 16.6 19.0 14.1 22.2 16.5 18.9 14.0 12 13 14 15 20.0 20.0 20.0 20.0 ... ... ... ... 18.0 20.0 18.0 20.0 ... ... ... ... 16.7 20.0 16.7 20.0 ... ... ... ... 15.7 20.0 15.7 20.0 ... ... ... ... 14.9 20.0 14.9 20.0 ... ... ... ... 14.4 19.5 14.4 19.5 14.2 19.2 14.2 19.2 14.1 19.0 14.1 19.0 14.0 18.8 14.0 18.8 13.9 18.7 13.9 18.7 13.8 18.6 13.8 18.6 13.7 18.5 13.7 18.5 13.6 18.4 13.6 18.4 16 17 18 19 20 23.3 23.3 23.3 23.3 23.3 ... ... ... ... ... 23.3 21.0 23.3 21.0 23.3 ... ... ... ... ... 23.3 19.5 23.3 19.5 23.3 ... ... ... ... ... 23.3 18.3 23.3 18.3 23.3 ... ... ... ... ... 23.3 17.4 23.3 17.4 23.3 ... ... ... ... ... 22.7 16.8 22.7 16.8 22.7 ... 16.6 22.4 16.6 22.4 22.2 16.4 22.2 16.4 22.2 ... 16.3 22.0 16.3 22.0 21.8 16.2 21.8 16.2 21.8 ... 16.1 21.7 16.1 21.7 21.6 16.0 21.6 16.0 21.6 ... 15.9 21.5 15.9 21.5 21 22 23 24 25 26 19.8 19.8 23.3 23.3 19.8 19.8 ... ... ... ... ... ... 17.8 19.8 21.0 23.3 17.8 19.8 ... ... ... ... ... ... 16.5 19.8 19.5 23.3 16.5 19.8 ... ... ... ... ... ... 15.5 19.8 18.3 23.3 15.5 19.8 ... ... ... ... ... ... 14.8 19.8 17.4 23.3 14.8 19.8 ... ... ... ... ... ... 14.3 19.3 16.8 22.7 14.3 19.3 14.1 19.1 16.6 22.4 14.1 19.1 14.0 18.8 16.4 22.2 14.0 18.8 13.8 18.7 16.3 22.0 13.8 18.7 13.7 18.5 16.2 21.8 13.7 18.5 13.7 18.4 16.1 21.7 13.7 18.4 13.6 18.3 16.0 21.6 13.6 18.3 13.5 18.3 15.9 21.5 13.5 18.3 27 28 29 30 31 28.6 28.6 28.6 28.6 28.6 ... ... ... ... ... 28.6 28.6 26.7 28.6 26.7 ... ... ... ... ... 28.2 28.2 24.6 28.2 24.6 ... ... ... ... ... 27.2 27.2 22.9 27.2 22.9 ... ... ... ... ... 26.5 26.5 21.5 26.5 21.5 ... ... ... ... ... 26.0 26.0 20.4 26.0 20.4 25.8 25.8 20.0 25.8 20.0 25.6 25.6 19.6 25.6 19.6 25.4 25.4 19.3 25.4 19.3 25.3 25.3 19.0 25.3 19.0 25.1 25.1 18.8 25.1 18.8 24.9 24.9 18.6 24.9 18.6 24.7 24.7 18.5 24.7 18.5 32 33 34 35 28.6 28.6 28.6 28.6 ... ... ... ... 28.6 26.7 28.6 26.7 ... ... ... ... 28.2 24.6 28.2 24.6 ... ... ... ... 27.2 22.9 27.2 22.9 ... ... ... ... 26.5 21.5 26.5 21.5 ... ... ... ... 26.0 20.4 26.0 20.4 25.8 20.0 25.8 20.0 25.6 19.6 25.6 19.6 25.4 19.3 25.4 19.3 25.3 19.0 25.3 19.0 25.1 18.8 25.1 18.8 24.9 18.6 24.9 18.6 24.7 18.5 24.7 18.5 36 37 38 39 40 41 24.3 24.3 28.6 28.6 24.3 24.3 ... ... ... ... ... ... 24.3 22.7 28.6 26.7 24.3 22.7 ... ... ... ... ... ... 23.9 20.9 28.2 24.6 23.9 20.9 ... ... ... ... ... ... 23.1 19.4 27.2 22.9 23.1 19.4 ... ... ... ... ... ... 22.6 18.3 26.5 21.5 22.6 18.3 ... ... ... ... ... ... 22.1 17.4 26.0 20.4 22.1 17.4 21.9 17.0 25.8 20.0 21.9 17.0 21.8 16.7 25.6 19.6 21.8 16.7 21.6 16.4 25.4 19.3 21.6 16.4 21.5 16.2 25.3 19.0 21.5 16.2 21.3 16.0 25.1 18.8 21.3 16.0 21.1 15.8 24.9 18.6 21.1 15.8 21.0 15.7 24.7 18.5 21.0 15.7 42 43 44 45 26.0 26.0 26.0 26.0 ... ... ... ... 26.0 25.8 26.0 25.8 ... ... ... ... 26.0 24.9 26.0 24.9 ... ... ... ... 26.0 23.7 26.0 23.7 ... ... ... ... 26.0 22.5 26.0 22.5 ... ... ... ... 26.0 21.5 26.0 21.5 26.0 21.1 26.0 21.1 26.0 20.7 26.0 20.7 26.0 20.4 26.0 20.4 26.0 20.2 26.0 20.2 26.0 20.0 26.0 20.0 26.0 19.9 26.0 19.9 22.1 19.8 22.1 19.8 204 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 19.4 14.3 19.4 14.3 19.3 14.3 19.3 14.3 17.5 14.2 17.5 14.2 14.1 14.1 14.1 14.1 11.3 11.3 11.3 11.3 9.3 9.3 9.3 9.3 7.7 7.7 7.7 7.7 6.1 6.1 6.1 6.1 4.8 4.8 4.8 4.8 3.8 3.8 3.8 3.8 3.0 3.0 3.0 3.0 2.3 2.3 2.3 2.3 1.7 1.7 1.7 1.7 1.2 1.2 1.2 1.2 ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 22.1 18.8 13.9 ... 18.5 13.9 17.5 14.9 13.8 ... 12.0 12.0 11.3 9.6 9.6 ... 7.9 7.9 7.7 6.5 6.5 ... 5.2 5.2 4.8 4.1 4.1 ... 3.2 3.2 3.0 2.6 2.6 ... 2.0 2.0 1.7 1.4 1.4 1.2 1.0 1.0 ... ... ... ... ... ... ... ... ... 8 9 10 11 22.1 16.4 18.8 13.9 21.7 16.3 18.5 13.9 17.5 16.2 14.9 13.8 14.1 14.1 12.0 12.0 11.3 11.3 9.6 9.6 9.3 9.3 7.9 7.9 7.7 7.7 6.5 6.5 6.1 6.1 5.2 5.2 4.8 4.8 4.1 4.1 3.8 3.8 3.2 3.2 3.0 3.0 2.6 2.6 2.3 2.3 2.0 2.0 1.7 1.7 1.4 1.4 1.2 1.2 1.0 1.0 ... ... ... ... ... ... ... ... ... ... ... ... 12 13 14 15 13.6 18.3 13.6 18.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 20 21.4 15.8 21.4 15.8 21.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 24 25 26 13.5 18.2 15.8 21.4 13.5 18.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 31 24.4 24.4 18.3 24.4 18.3 23.0 23.0 18.2 23.0 18.2 17.5 17.5 17.5 17.5 17.5 12.7 12.7 12.7 12.7 12.7 9.6 9.6 9.6 9.6 9.6 7.6 7.6 7.6 7.6 7.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 24.4 18.3 24.4 18.3 23.0 18.2 23.0 18.2 17.5 17.5 17.5 17.5 12.7 12.7 12.7 12.7 9.6 9.6 9.6 9.6 7.6 7.6 7.6 7.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 40 41 20.7 15.6 24.4 18.3 20.7 15.6 19.6 15.5 23.0 18.2 19.6 15.5 14.9 14.9 17.5 17.5 14.9 14.9 10.8 10.8 12.7 12.7 10.8 10.8 8.2 8.2 9.6 9.6 8.2 8.2 6.5 6.5 7.6 7.6 6.5 6.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 42 43 44 45 17.0 17.0 17.0 17.0 12.9 12.9 12.9 12.9 9.7 9.7 9.7 9.7 7.2 7.2 7.2 7.2 5.4 5.4 5.4 5.4 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 2.2 2.2 2.2 2.2 1.6 1.6 1.6 1.6 1.2 1.2 1.2 1.2 1.0 1.0 1.0 1.0 0.81 0.81 0.81 0.81 0.67 0.67 0.67 0.67 0.57 0.57 0.57 0.57 0.49 0.49 0.49 0.49 0.42 0.42 0.42 0.42 0.37 0.37 0.37 0.37 205 ð15Þ ð15Þ ð15Þ ð15Þ This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 1 2 3 4 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al Wrought fittings Wrought fittings Forgings Forgings SB–366 SB–366 SB–462 SB–462 ... ... ... ... N06025 N06025 N06025 N06025 Annealed Annealed Annealed Annealed ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 5 6 7 8 9 10 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al Wld. tube Wld. tube Wld. pipe Wld. pipe Forgings Forgings SB–516 SB–516 SB–517 SB–517 SB–564 SB–564 ... ... ... ... ... ... N06025 N06025 N06025 N06025 N06025 N06025 Annealed Annealed Annealed Annealed Annealed Annealed ð15Þ ð15Þ ð15Þ ð15Þ 11 12 13 14 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al 60Ni–25Cr–9.5Fe–2.1Al Bar Bar Smls. pipe & tube Smls. pipe & tube SB–166 SB–166 SB–167 SB–167 ... ... ... ... N06025 N06025 N06025 N06025 HW HW HW HW 15 16 17 40Ni–29Cr–15Fe–5Mo 40Ni–29Cr–15Fe–5Mo 40Ni–29Cr–15Fe–5Mo Smls. & wld. fittings Forgings Forgings SB–366 SB–462 SB–462 ... ... ... N06030 N06030 N06030 Solution ann. Solution ann. Solution ann. 18 19 20 21 40Ni–29Cr–15Fe–5Mo 40Ni–29Cr–15Fe–5Mo 40Ni–29Cr–15Fe–5Mo 40Ni–29Cr–15Fe–5Mo Rod Rod Plate, sheet, strip Plate, sheet, strip SB–581 SB–581 SB–582 SB–582 ... ... ... ... N06030 N06030 N06030 N06030 Solution Solution Solution Solution ann. ann. ann. ann. 22 23 24 25 26 27 40Ni–29Cr–15Fe–5Mo 40Ni–29Cr–15Fe–5Mo 40Ni–29Cr–15Fe–5Mo 40Ni–29Cr–15Fe–5Mo 40Ni–29Cr–15Fe–5Mo 40Ni–29Cr–15Fe–5Mo Wld. pipe Wld. pipe Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–619 SB–619 SB–622 SB–622 SB–626 SB–626 ... ... ... ... ... ... N06030 N06030 N06030 N06030 N06030 N06030 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 28 29 30 58Ni–33Cr–8Mo 58Ni–33Cr–8Mo 58Ni–33Cr–8Mo Smls. & wld. fittings Forgings Forgings SB–366 SB–462 SB–462 ... ... ... N06035 N06035 N06035 Solution ann. Solution ann. Solution ann. 31 32 33 34 58Ni–33Cr–8Mo 58Ni–33Cr–8Mo 58Ni–33Cr–8Mo 58Ni–33Cr–8Mo Forgings Forgings Rod Rod SB–564 SB–564 SB–574 SB–574 ... ... ... ... N06035 N06035 N06035 N06035 Solution Solution Solution Solution ann. ann. ann. ann. 35 36 37 38 58Ni–33Cr–8Mo 58Ni–33Cr–8Mo 58Ni–33Cr–8Mo 58Ni–33Cr–8Mo Plate, sheet, strip Plate, sheet, strip Wld. pipe Wld. pipe SB–575 SB–575 SB–619 SB–619 ... ... ... ... N06035 N06035 N06035 N06035 Solution Solution Solution Solution ann. ann. ann. ann. 39 40 41 42 58Ni–33Cr–8Mo 58Ni–33Cr–8Mo 58Ni–33Cr–8Mo 58Ni–33Cr–8Mo Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–622 SB–622 SB–626 SB–626 ... ... ... ... N06035 N06035 N06035 N06035 Solution Solution Solution Solution ann. ann. ann. ann. 206 or or or or CW CW CW CW ann. ann. ann. ann. This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. ð15Þ ð15Þ ð15Þ ð15Þ Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... t≤4 t≤4 43 43 43 43 98 98 98 98 39 39 39 39 1650 1650 1650 1650 NP NP NP NP 1800 1800 1800 1800 NP NP NP NP NFN–13 NFN–13 NFN–13 NFN–13 G4, G4, G4, G4, G5, G30, G31, G32, T12 G30, G31, G32, T13 G5, G30, G31, G32, T12 G30, G31, G32, T13 5 6 7 8 9 10 ... ... ... ... t≤4 t≤4 43 43 43 43 43 43 98 98 98 98 98 98 39 39 39 39 39 39 1650 1650 1650 1650 1650 1650 NP NP NP NP NP NP 1800 1800 1800 1800 1800 1800 NP NP NP NP NP NP NFN–13 NFN–13 NFN–13 NFN–13 NFN–13 NFN–13 G4, G4, G4, G4, G4, G4, G5, G14, G30, G31, G32, T12 G14, G30, G31, G32, T13 G5, G14, G30, G31, G32, T12 G14, G30, G31, G32, T13 G5, G30, G31, G32, T12 G30, G31, G32, T13 11 12 13 14 t≤4 t≤4 ... ... 43 43 43 43 98 98 98 98 39 39 39 39 1650 1650 1650 1650 NP NP NP NP 1800 1800 1800 1800 NP NP NP NP NFN–13 NFN–13 NFN–13 NFN–13 G4, G4, G4, G4, G5, G30, G31, G32, T12 G30, G31, G32, T13 G5, G30, G31, G32, T12 G30, G31, G32, T13 15 16 17 ... ... ... 45 45 45 85 85 85 35 35 35 NP NP NP NP NP NP 800 800 800 650 NP NP NFN–19 NFN–19 NFN–19 G5, W12 G5 ... 18 19 20 21 ... ... ... ... 45 45 45 45 85 85 85 85 35 35 35 35 NP NP NP NP 800 NP 800 NP 800 800 800 800 650 650 650 650 NFN–19 NFN–19 NFN–19 NFN–19 G5 ... G5 ... 22 23 24 25 26 27 ... ... ... ... ... ... 45 45 45 45 45 45 85 85 85 85 85 85 35 35 35 35 35 35 NP NP NP NP NP NP 800 NP 800 NP 800 NP 800 800 800 800 800 800 650 650 650 650 650 650 NFN–19 NFN–19 NFN–19 NFN–19 NFN–19 NFN–19 G5, G14, W6 G14 G5 ... G5, G14, W6 G14 28 29 30 ... ... ... 43 43 43 85 85 85 35 35 35 NP NP NP NP NP NP 800 800 800 NP NP NP NFN–27 NFN–27 NFN–27 G5, W12 G5 ... 31 32 33 34 ... ... ... ... 43 43 43 43 85 85 85 85 35 35 35 35 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–27 NFN–27 NFN–27 NFN–27 G5 ... G5 ... 35 36 37 38 ... ... ... ... 43 43 43 43 85 85 85 85 35 35 35 35 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–27 NFN–27 NFN–27 NFN–27 G5 ... G5, G14 G14 39 40 41 42 ... ... ... ... 43 43 43 43 85 85 85 85 35 35 35 35 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–27 NFN–27 NFN–27 NFN–27 G5 ... G5, G14 G14 207 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 26.0 26.0 26.0 26.0 ... ... ... ... 26.0 25.8 26.0 25.8 ... ... ... ... 26.0 24.9 26.0 24.9 ... ... ... ... 26.0 23.7 26.0 23.7 ... ... ... ... 26.0 22.5 26.0 22.5 ... ... ... ... 26.0 21.5 26.0 21.5 26.0 21.1 26.0 21.1 26.0 20.7 26.0 20.7 26.0 20.4 26.0 20.4 26.0 20.2 26.0 20.2 26.0 20.0 26.0 20.0 26.0 19.9 26.0 19.9 22.1 19.8 22.1 19.8 5 6 7 8 9 10 22.1 22.1 22.1 22.1 26.0 26.0 ... ... ... ... ... ... 22.1 21.9 22.1 21.9 26.0 25.8 ... ... ... ... ... ... 22.1 21.1 22.1 21.1 26.0 24.9 ... ... ... ... ... ... 22.1 20.1 22.1 20.1 26.0 23.7 ... ... ... ... ... ... 22.1 19.1 22.1 19.1 26.0 22.5 ... ... ... ... ... ... 22.1 18.3 22.1 18.3 26.0 21.5 22.1 17.9 22.1 17.9 26.0 21.1 22.1 17.6 22.1 17.6 26.0 20.7 22.1 17.4 22.1 17.4 26.0 20.4 22.1 17.2 22.1 17.2 26.0 20.2 22.1 17.0 22.1 17.0 26.0 20.0 22.1 16.9 22.1 16.9 26.0 19.9 18.8 16.8 18.8 16.8 22.1 19.8 11 12 13 14 26.0 26.0 26.0 26.0 ... ... ... ... 26.0 25.8 26.0 25.8 ... ... ... ... 26.0 24.9 26.0 24.9 ... ... ... ... 26.0 23.7 26.0 23.7 ... ... ... ... 26.0 22.5 26.0 22.5 ... ... ... ... 26.0 21.5 26.0 21.5 26.0 21.1 26.0 21.1 26.0 20.7 26.0 20.7 26.0 20.4 26.0 20.4 26.0 20.2 26.0 20.2 26.0 20.0 26.0 20.0 26.0 19.9 26.0 19.9 22.1 19.8 22.1 19.8 15 16 17 23.3 23.3 23.3 ... ... ... 23.3 23.3 20.0 ... ... ... 23.3 23.3 18.3 ... ... ... 22.5 22.5 17.2 ... ... ... 21.9 21.9 16.4 ... ... ... 21.3 21.3 15.8 20.9 20.9 15.5 20.5 20.5 15.2 20.1 20.1 14.9 19.7 19.7 14.6 ... ... ... ... ... ... ... ... ... 18 19 20 21 23.3 23.3 23.3 23.3 ... ... ... ... 23.3 20.0 23.3 20.0 ... ... ... ... 23.3 18.3 23.3 18.3 ... ... ... ... 22.5 17.2 22.5 17.2 ... ... ... ... 21.9 16.4 21.9 16.4 ... ... ... ... 21.3 15.8 21.3 15.8 20.9 15.5 20.9 15.5 20.5 15.2 20.5 15.2 20.1 14.9 20.1 14.9 19.7 14.6 19.7 14.6 ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 26 27 19.8 19.8 23.3 23.3 19.8 19.8 ... ... ... ... ... ... 19.8 17.0 23.3 20.0 19.8 17.0 ... ... ... ... ... ... 19.8 15.6 23.3 18.3 19.8 15.6 ... ... ... ... ... ... 19.1 14.6 22.5 17.2 19.1 14.6 ... ... ... ... ... ... 18.6 13.9 21.9 16.4 18.6 13.9 ... ... ... ... ... ... 18.1 13.4 21.3 15.8 18.1 13.4 17.7 13.1 20.9 15.5 17.7 13.1 17.4 12.9 20.5 15.2 17.4 12.9 17.1 12.7 20.1 14.9 17.1 12.7 16.8 12.4 19.7 14.6 16.8 12.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 23.3 23.3 23.3 ... ... ... 23.3 23.3 20.4 ... ... ... 23.3 23.3 18.2 ... ... ... 22.2 22.2 16.5 ... ... ... 20.5 20.5 15.3 ... ... ... 19.7 19.7 14.6 19.4 19.4 14.4 19.2 19.2 14.2 19.0 19.0 14.1 18.8 18.8 13.9 ... ... ... ... ... ... ... ... ... 31 32 33 34 23.3 23.3 23.3 23.3 ... ... ... ... 23.3 20.4 23.3 20.4 ... ... ... ... 23.3 18.2 23.3 18.2 ... ... ... ... 22.2 16.5 22.2 16.5 ... ... ... ... 20.5 15.3 20.5 15.3 ... ... ... ... 19.7 14.6 19.7 14.6 19.4 14.4 19.4 14.4 19.2 14.2 19.2 14.2 19.0 14.1 19.0 14.1 18.8 13.9 18.8 13.9 ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 38 23.3 23.3 19.8 19.8 ... ... ... ... 23.3 20.4 19.8 17.3 ... ... ... ... 23.3 18.2 19.8 15.5 ... ... ... ... 22.2 16.5 18.9 14.0 ... ... ... ... 20.5 15.3 17.4 13.0 ... ... ... ... 19.7 14.6 16.7 12.4 19.4 14.4 16.5 12.2 19.2 14.2 16.3 12.1 19.0 14.1 16.2 12.0 18.8 13.9 16.0 11.8 ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 23.3 23.3 19.8 19.8 ... ... ... ... 23.3 20.4 19.8 17.3 ... ... ... ... 23.3 18.2 19.8 15.5 ... ... ... ... 22.2 16.5 18.9 14.0 ... ... ... ... 20.5 15.3 17.4 13.0 ... ... ... ... 19.7 14.6 16.7 12.4 19.4 14.4 16.5 12.2 19.2 14.2 16.3 12.1 19.0 14.1 16.2 12.0 18.8 13.9 16.0 11.8 ... ... ... ... ... ... ... ... ... ... ... ... 208 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 17.0 17.0 17.0 17.0 12.9 12.9 12.9 12.9 9.7 9.7 9.7 9.7 7.2 7.2 7.2 7.2 5.4 5.4 5.4 5.4 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 2.2 2.2 2.2 2.2 1.6 1.6 1.6 1.6 1.2 1.2 1.2 1.2 1.0 1.0 1.0 1.0 0.81 0.81 0.81 0.81 0.67 0.67 0.67 0.67 0.57 0.57 0.57 0.57 0.49 0.49 0.49 0.49 0.42 0.42 0.42 0.42 0.37 0.37 0.37 0.37 ð15Þ ð15Þ ð15Þ ð15Þ 5 6 7 8 9 10 14.4 14.4 14.4 14.4 17.0 17.0 10.9 10.9 10.9 10.9 12.9 12.9 8.2 8.2 8.2 8.2 9.7 9.7 6.1 6.1 6.1 6.1 7.2 7.2 4.5 4.5 4.5 4.5 5.4 5.4 3.4 3.4 3.4 3.4 4.0 4.0 2.6 2.6 2.6 2.6 3.0 3.0 1.9 1.9 1.9 1.9 2.2 2.2 1.4 1.4 1.4 1.4 1.6 1.6 1.1 1.1 1.1 1.1 1.2 1.2 0.80 0.80 0.80 0.80 1.0 1.0 0.69 0.69 0.69 0.69 0.81 0.81 0.57 0.57 0.57 0.57 0.67 0.67 0.48 0.48 0.48 0.48 0.57 0.57 0.41 0.41 0.41 0.41 0.49 0.49 0.36 0.36 0.36 0.36 0.42 0.42 0.31 0.31 0.31 0.31 0.37 0.37 ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 11 12 13 14 17.0 17.0 17.0 17.0 12.9 12.9 12.9 12.9 9.7 9.7 9.7 9.7 7.2 7.2 7.2 7.2 5.4 5.4 5.4 5.4 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 2.2 2.2 2.2 2.2 1.6 1.6 1.6 1.6 1.2 1.2 1.2 1.2 1.0 1.0 1.0 1.0 0.81 0.81 0.81 0.81 0.67 0.67 0.67 0.67 0.57 0.57 0.57 0.57 0.49 0.49 0.49 0.49 0.42 0.42 0.42 0.42 0.37 0.37 0.37 0.37 ð15Þ ð15Þ ð15Þ ð15Þ 15 16 17 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 18 19 20 21 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 26 27 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 28 29 30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 38 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 209 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 46Ni–27Cr–23Fe–2.75Si 46Ni–27Cr–23Fe–2.75Si 46Ni–27Cr–23Fe–2.75Si 46Ni–27Cr–23Fe–2.75Si Rod Rod Smls. pipe & tube Smls. pipe & tube SB–166 SB–166 SB–167 SB–167 ... ... ... ... N06045 N06045 N06045 N06045 Solution Solution Solution Solution ann. ann. ann. ann. 5 6 7 8 9 46Ni–27Cr–23Fe–2.75Si 46Ni–27Cr–23Fe–2.75Si 46Ni–27Cr–23Fe–2.75Si 46Ni–27Cr–23Fe–2.75Si 46Ni–27Cr–23Fe–2.75Si Plate, sheet, strip Plate, sheet, strip Smls. & wld. fittings Forged fittings Forged fittings SB–168 SB–168 SB–366 SB–462 SB–462 ... ... ... ... ... N06045 N06045 N06045 N06045 N06045 Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. 10 11 12 13 14 15 46Ni–27Cr–23Fe–2.75Si 46Ni–27Cr–23Fe–2.75Si 46Ni–27Cr–23Fe–2.75Si 46Ni–27Cr–23Fe–2.75Si 46Ni–27Cr–23Fe–2.75Si 46Ni–27Cr–23Fe–2.75Si Wld. tube Wld. tube Wld. pipe Wld. pipe Forgings Forgings SB–516 SB–516 SB–517 SB–517 SB–564 SB–564 ... ... ... ... ... ... N06045 N06045 N06045 N06045 N06045 N06045 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 16 17 18 19 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo Fittings Fittings Wld. fittings Fittings SB–366 SB–366 SB–366 SB–366 CR5923 WP5923 WP5923W WP5923WX N06059 N06059 N06059 N06059 Annealed Annealed Annealed Annealed 20 21 22 23 24 25 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo Forged fittings Forged fittings Forgings Forgings Rod Rod SB–462 SB–462 SB–564 SB–564 SB–574 SB–574 ... ... ... ... ... ... N06059 N06059 N06059 N06059 N06059 N06059 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 26 27 28 29 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo Plate, sheet, strip Plate, sheet, strip Wld. pipe Wld. pipe SB–575 SB–575 SB–619 SB–619 ... ... ... ... N06059 N06059 N06059 N06059 Solution Solution Solution Solution ann. ann. ann. ann. 30 31 32 33 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo 59Ni–23Cr–16Mo Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–622 SB–622 SB–626 SB–626 ... ... ... ... N06059 N06059 N06059 N06059 Solution Solution Solution Solution ann. ann. ann. ann. 34 35 36 37 38 59Ni–23Cr–16Mo–1.6Cu 59Ni–23Cr–16Mo–1.6Cu 59Ni–23Cr–16Mo–1.6Cu 59Ni–23Cr–16Mo–1.6Cu 59Ni–23Cr–16Mo–1.6Cu Smls. & wld. fittings Forgings Forgings Forgings Forgings SB–366 SB–462 SB–462 SB–564 SB–564 ... ... ... ... ... N06200 N06200 N06200 N06200 N06200 Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. 39 40 41 42 59Ni–23Cr–16Mo–1.6Cu 59Ni–23Cr–16Mo–1.6Cu 59Ni–23Cr–16Mo–1.6Cu 59Ni–23Cr–16Mo–1.6Cu Rod Rod Plate, sheet, strip Plate, sheet, strip SB–574 SB–574 SB–575 SB–575 ... ... ... ... N06200 N06200 N06200 N06200 Solution Solution Solution Solution ann. ann. ann. ann. 210 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... ... 46 46 46 46 90 90 90 90 35 35 35 35 1500 1500 1500 1500 NP NP NP NP 1500 1500 1500 1500 NP NP NP NP NFN–8 NFN–8 NFN–8 NFN–8 G5, T11 T11 G5, T11 T11 5 6 7 8 9 ... ... ... ... ... 46 46 46 46 46 90 90 90 90 90 35 35 35 35 35 1500 1500 1500 1500 1500 NP NP NP NP NP 1500 1500 1500 1500 1500 NP NP NP NP NP NFN–8 NFN–8 NFN–8 NFN–8 NFN–8 G5, T11 T11 G5, T11, W12 G5, T11 T11 10 11 12 13 14 15 ... ... ... ... ... ... 46 46 46 46 46 46 90 90 90 90 90 90 35 35 35 35 35 35 1500 1500 1500 1500 1500 1500 NP NP NP NP NP NP 1500 1500 1500 1500 1500 1500 NP NP NP NP NP NP NFN–8 NFN–8 NFN–8 NFN–8 NFN–8 NFN–8 G5, G14, T11 G14, T11 G5, G14, T11 G14, T11 G5, T11 T11 16 17 18 19 ... ... ... ... 43 43 43 43 100 100 100 100 45 45 45 45 NP NP NP NP 800 800 800 800 1400 1400 1400 1400 650 650 650 650 NFN–14 NFN–14 NFN–14 NFN–14 G5, G5, G5, G5, 20 21 22 23 24 25 ... ... ... ... ... ... 43 43 43 43 43 43 100 100 100 100 100 100 45 45 45 45 45 45 NP NP NP NP NP NP NP NP 800 800 800 800 1400 1400 1400 1400 1400 1400 650 650 650 650 650 650 NFN–14 NFN–14 NFN–14 NFN–14 NFN–14 NFN–14 G23, T16 G5, G23, T16 G23, T16 G5, G23, T16 G23, T16 G5, G23, T16 26 27 28 29 ... ... ... ... 43 43 43 43 100 100 100 100 45 45 45 45 NP NP NP NP 800 800 800 800 1400 1400 1400 1400 650 650 650 650 NFN–14 NFN–14 NFN–14 NFN–14 G23, T16 G5, G23, T16 G14, G23, T16 G5, G14, G23, T16 30 31 32 33 ... ... ... ... 43 43 43 43 100 100 100 100 45 45 45 45 NP NP NP NP 800 800 800 800 1400 1400 1400 1400 650 650 650 650 NFN–14 NFN–14 NFN–14 NFN–14 G23, T16 G5, G23, T16 G14, G23, T16 G5, G14, G23, T16 34 35 36 37 38 ... ... ... ... ... 43 43 43 43 43 100 100 100 100 100 45 45 45 45 45 NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 NP NP NP NP NP NFN–10 NFN–10 NFN–10 NFN–10 NFN–10 G5, W12 ... G5 ... G5 39 40 41 42 ... ... ... ... 43 43 43 43 100 100 100 100 45 45 45 45 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–10 NFN–10 NFN–10 NFN–10 ... G5 ... G5 211 G14, G23, G14, G23, G23, T16 T16 G23, T16 T16 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 23.3 23.3 23.3 23.3 ... ... ... ... 23.3 20.9 23.3 20.9 ... ... ... ... 23.3 19.3 23.3 19.3 ... ... ... ... 23.3 18.1 23.3 18.1 ... ... ... ... 22.6 17.4 22.6 17.4 ... ... ... ... 22.1 17.0 22.1 17.0 21.9 16.8 21.9 16.8 21.7 16.8 21.7 16.8 21.6 16.7 21.6 16.7 21.4 16.6 21.4 16.6 21.1 16.5 21.1 16.5 16.0 16.0 16.0 16.0 12.9 12.9 12.9 12.9 5 6 7 8 9 23.3 23.3 23.3 23.3 23.3 ... ... ... ... ... 23.3 20.9 23.3 23.3 20.9 ... ... ... ... ... 23.3 19.3 23.3 23.3 19.3 ... ... ... ... ... 23.3 18.1 23.3 23.3 18.1 ... ... ... ... ... 22.6 17.4 22.6 22.6 17.4 ... ... ... ... ... 22.1 17.0 22.1 22.1 17.0 21.9 16.8 21.9 21.9 16.8 21.7 16.8 21.7 21.7 16.8 21.6 16.7 21.6 21.6 16.7 21.4 16.6 21.4 21.4 16.6 21.1 16.5 21.1 21.1 16.5 16.0 16.0 16.0 16.0 16.0 12.9 12.9 12.9 12.9 12.9 10 11 12 13 14 15 19.8 19.8 19.8 19.8 23.3 23.3 ... ... ... ... ... ... 19.8 17.8 19.8 17.8 23.3 20.9 ... ... ... ... ... ... 19.8 16.4 19.8 16.4 23.3 19.3 ... ... ... ... ... ... 19.8 15.4 19.8 15.4 23.3 18.1 ... ... ... ... ... ... 19.2 14.8 19.2 14.8 22.6 17.4 ... ... ... ... ... ... 18.8 14.5 18.8 14.5 22.1 17.0 18.6 14.3 18.6 14.3 21.9 16.8 18.4 14.3 18.4 14.3 21.7 16.8 18.4 14.2 18.4 14.2 21.6 16.7 18.2 14.1 18.2 14.1 21.4 16.6 17.9 14.0 17.9 14.0 21.1 16.5 13.6 13.6 13.6 13.6 16.0 16.0 11.0 11.0 11.0 11.0 12.9 12.9 16 17 18 19 24.3 28.6 24.3 28.6 ... ... ... ... 24.3 28.6 24.3 28.6 ... ... ... ... 24.3 28.6 24.3 28.6 ... ... ... ... 23.8 28.0 23.8 28.0 ... ... ... ... 23.0 27.0 23.0 27.0 ... ... ... ... 22.1 26.0 22.1 26.0 21.8 25.6 21.8 25.6 21.4 25.2 21.4 25.2 21.2 24.9 21.2 24.9 20.9 24.6 20.9 24.6 20.7 24.4 20.7 24.4 20.6 24.2 20.6 24.2 20.1 23.7 20.1 23.7 20 21 22 23 24 25 28.6 28.6 28.6 28.6 28.6 28.6 ... ... ... ... ... ... 26.9 28.6 26.9 28.6 26.9 28.6 ... ... ... ... ... ... 25.2 28.6 25.2 28.6 25.2 28.6 ... ... ... ... ... ... 23.8 28.0 23.8 28.0 23.8 28.0 ... ... ... ... ... ... 22.6 27.0 22.6 27.0 22.6 27.0 ... ... ... ... ... ... 21.4 26.0 21.4 26.0 21.4 26.0 20.8 25.6 20.8 25.6 20.8 25.6 20.2 25.2 20.2 25.2 20.2 25.2 19.6 24.9 19.6 24.9 19.6 24.9 19.1 24.6 19.1 24.6 19.1 24.6 18.5 24.4 18.5 24.4 18.5 24.4 18.0 24.2 18.0 24.2 18.0 24.2 17.5 23.7 17.5 23.7 17.5 23.7 26 27 28 29 28.6 28.6 24.3 24.3 ... ... ... ... 26.9 28.6 22.9 24.3 ... ... ... ... 25.2 28.6 21.4 24.3 ... ... ... ... 23.8 28.0 20.2 23.8 ... ... ... ... 22.6 27.0 19.2 23.0 ... ... ... ... 21.4 26.0 18.2 22.1 20.8 25.6 17.7 21.8 20.2 25.2 17.2 21.4 19.6 24.9 16.7 21.2 19.1 24.6 16.2 20.9 18.5 24.4 15.7 20.7 18.0 24.2 15.3 20.6 17.5 23.7 14.9 20.1 30 31 32 33 28.6 28.6 24.3 24.3 ... ... ... ... 26.9 28.6 22.9 24.3 ... ... ... ... 25.2 28.6 21.4 24.3 ... ... ... ... 23.8 28.0 20.2 23.8 ... ... ... ... 22.6 27.0 19.2 23.0 ... ... ... ... 21.4 26.0 18.2 22.1 20.8 25.6 17.7 21.8 20.2 25.2 17.2 21.4 19.6 24.9 16.7 21.2 19.1 24.6 16.2 20.9 18.5 24.4 15.7 20.7 18.0 24.2 15.3 20.6 17.5 23.7 14.9 20.1 34 35 36 37 38 28.6 28.6 28.6 28.6 28.6 ... ... ... ... ... 28.6 26.9 28.6 26.9 28.6 ... ... ... ... ... 28.6 24.8 28.6 24.8 28.6 ... ... ... ... ... 27.6 22.9 27.6 22.9 27.6 ... ... ... ... ... 26.8 21.2 26.8 21.2 26.8 ... ... ... ... ... 26.2 19.9 26.2 19.9 26.2 26.0 19.4 26.0 19.4 26.0 25.7 19.1 25.7 19.1 25.7 25.4 18.8 25.4 18.8 25.4 25.2 18.7 25.2 18.7 25.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 28.6 28.6 28.6 28.6 ... ... ... ... 26.9 28.6 26.9 28.6 ... ... ... ... 24.8 28.6 24.8 28.6 ... ... ... ... 22.9 27.6 22.9 27.6 ... ... ... ... 21.2 26.8 21.2 26.8 ... ... ... ... 19.9 26.2 19.9 26.2 19.4 26.0 19.4 26.0 19.1 25.7 19.1 25.7 18.8 25.4 18.8 25.4 18.7 25.2 18.7 25.2 ... ... ... ... ... ... ... ... ... ... ... ... 212 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 9.4 9.4 9.4 9.4 7.1 7.1 7.1 7.1 5.6 5.6 5.6 5.6 4.4 4.4 4.4 4.4 3.5 3.5 3.5 3.5 2.8 2.8 2.8 2.8 2.2 2.2 2.2 2.2 1.8 1.8 1.8 1.8 1.4 1.4 1.4 1.4 1.1 1.1 1.1 1.1 0.85 0.85 0.85 0.85 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 9 9.4 9.4 9.4 9.4 9.4 7.1 7.1 7.1 7.1 7.1 5.6 5.6 5.6 5.6 5.6 4.4 4.4 4.4 4.4 4.4 3.5 3.5 3.5 3.5 3.5 2.8 2.8 2.8 2.8 2.8 2.2 2.2 2.2 2.2 2.2 1.8 1.8 1.8 1.8 1.8 1.4 1.4 1.4 1.4 1.4 1.1 1.1 1.1 1.1 1.1 0.85 0.85 0.85 0.85 0.85 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 14 15 8.0 8.0 8.0 8.0 9.4 9.4 6.0 6.0 6.0 6.0 7.1 7.1 4.8 4.8 4.8 4.8 5.6 5.6 3.7 3.7 3.7 3.7 4.4 4.4 3.0 3.0 3.0 3.0 3.5 3.5 2.4 2.4 2.4 2.4 2.8 2.8 1.9 1.9 1.9 1.9 2.2 2.2 1.5 1.5 1.5 1.5 1.8 1.8 1.2 1.2 1.2 1.2 1.4 1.4 0.90 0.90 0.90 0.90 1.1 1.1 0.70 0.70 0.70 0.70 0.85 0.85 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 19.6 23.1 19.6 23.1 19.2 22.6 19.2 22.6 16.0 18.8 16.0 18.8 12.4 14.6 12.4 14.6 9.9 11.6 9.9 11.6 8.0 9.4 8.0 9.4 6.3 7.4 6.3 7.4 5.0 5.9 5.0 5.9 4.1 4.8 4.1 4.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 24 25 17.1 23.1 17.1 23.1 17.1 23.1 16.8 22.6 16.8 22.6 16.8 22.6 16.5 18.8 16.5 18.8 16.5 18.8 14.6 14.6 14.6 14.6 14.6 14.6 11.6 11.6 11.6 11.6 11.6 11.6 9.4 9.4 9.4 9.4 9.4 9.4 7.4 7.4 7.4 7.4 7.4 7.4 5.9 5.9 5.9 5.9 5.9 5.9 4.8 4.8 4.8 4.8 4.8 4.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 26 27 28 29 17.1 23.1 14.5 19.6 16.8 22.6 14.3 19.2 16.5 18.8 14.0 16.0 14.6 14.6 12.4 12.4 11.6 11.6 9.9 9.9 9.4 9.4 8.0 8.0 7.4 7.4 6.3 6.3 5.9 5.9 5.0 5.0 4.8 4.8 4.1 4.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 33 17.1 23.1 14.5 19.6 16.8 22.6 14.3 19.2 16.5 18.8 14.0 16.0 14.6 14.6 12.4 12.4 11.6 11.6 9.9 9.9 9.4 9.4 8.0 8.0 7.4 7.4 6.3 6.3 5.9 5.9 5.0 5.0 4.8 4.8 4.1 4.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 38 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 213 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 59Ni–23Cr–16Mo–1.6Cu 59Ni–23Cr–16Mo–1.6Cu 59Ni–23Cr–16Mo–1.6Cu 59Ni–23Cr–16Mo–1.6Cu 59Ni–23Cr–16Mo–1.6Cu 59Ni–23Cr–16Mo–1.6Cu Wld. pipe Wld. pipe Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–619 SB–619 SB–622 SB–622 SB–626 SB–626 ... ... ... ... ... ... N06200 N06200 N06200 N06200 N06200 N06200 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 7 8 9 10 11 60Ni–19Cr–19Mo–1.8Ta 60Ni–19Cr–19Mo–1.8Ta 60Ni–19Cr–19Mo–1.8Ta 60Ni–19Cr–19Mo–1.8Ta 60Ni–19Cr–19Mo–1.8Ta Smls. & wld. fittings Forgings Forgings Rod Rod SB–366 SB–564 SB–564 SB–574 SB–574 ... ... ... ... ... N06210 N06210 N06210 N06210 N06210 Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. 12 13 14 15 60Ni–19Cr–19Mo–1.8Ta 60Ni–19Cr–19Mo–1.8Ta 60Ni–19Cr–19Mo–1.8Ta 60Ni–19Cr–19Mo–1.8Ta Plate, sheet, strip Plate, sheet, strip Wld. pipe Wld. pipe SB–575 SB–575 SB–619 SB–619 ... ... ... ... N06210 N06210 N06210 N06210 Solution Solution Solution Solution ann. ann. ann. ann. 16 17 18 19 60Ni–19Cr–19Mo–1.8Ta 60Ni–19Cr–19Mo–1.8Ta 60Ni–19Cr–19Mo–1.8Ta 60Ni–19Cr–19Mo–1.8Ta Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–622 SB–622 SB–626 SB–626 ... ... ... ... N06210 N06210 N06210 N06210 Solution Solution Solution Solution ann. ann. ann. ann. 20 21 22 23 24 57Ni–22Cr–14W–2Mo–La 57Ni–22Cr–14W–2Mo–La 57Ni–22Cr–14W–2Mo–La 57Ni–22Cr–14W–2Mo–La 57Ni–22Cr–14W–2Mo–La Smls. & wld. fittings Plate, sheet, strip Plate, sheet, strip Forgings Forgings SB–366 SB–435 SB–435 SB–564 SB–564 ... ... ... ... ... N06230 N06230 N06230 N06230 N06230 Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. 25 26 27 28 57Ni–22Cr–14W–2Mo–La 57Ni–22Cr–14W–2Mo–La 57Ni–22Cr–14W–2Mo–La 57Ni–22Cr–14W–2Mo–La Bar Bar Wld. pipe Wld. pipe SB–572 SB–572 SB–619 SB–619 ... ... ... ... N06230 N06230 N06230 N06230 Solution Solution Solution Solution ann. ann. ann. ann. 29 30 31 32 57Ni–22Cr–14W–2Mo–La 57Ni–22Cr–14W–2Mo–La 57Ni–22Cr–14W–2Mo–La 57Ni–22Cr–14W–2Mo–La Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–622 SB–622 SB–626 SB–626 ... ... ... ... N06230 N06230 N06230 N06230 Solution Solution Solution Solution ann. ann. ann. ann. 33 34 35 36 37 61Ni–16Mo–16Cr 61Ni–16Mo–16Cr 61Ni–16Mo–16Cr 61Ni–16Mo–16Cr 61Ni–16Mo–16Cr Smls. & wld. fittings Rod Rod Plate, sheet, strip Plate, sheet, strip SB–366 SB–574 SB–574 SB–575 SB–575 ... ... ... ... ... N06455 N06455 N06455 N06455 N06455 Annealed Solution ann. Solution ann. Solution ann. Solution ann. 38 39 40 41 42 43 61Ni–16Mo–16Cr 61Ni–16Mo–16Cr 61Ni–16Mo–16Cr 61Ni–16Mo–16Cr 61Ni–16Mo–16Cr 61Ni–16Mo–16Cr Wld. pipe Wld. pipe Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–619 SB–619 SB–622 SB–622 SB–626 SB–626 ... ... ... ... ... ... N06455 N06455 N06455 N06455 N06455 N06455 Solution Solution Solution Solution Solution Solution 214 ann. ann. ann. ann. ann. ann. This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... ... ... ... 43 43 43 43 43 43 100 100 100 100 100 100 45 45 45 45 45 45 NP NP NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 800 NP NP NP NP NP NP NFN–10 NFN–10 NFN–10 NFN–10 NFN–10 NFN–10 G14 G5, G14 ... G5 G14 G5, G14 7 8 9 10 11 ... ... ... ... ... 43 43 43 43 43 100 100 100 100 100 45 45 45 45 45 NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 NP NP NP NP NP NFN–14 NFN–14 NFN–14 NFN–14 NFN–14 G5, W12 ... G5 ... G5 12 13 14 15 ... ... ... ... 43 43 43 43 100 100 100 100 45 45 45 45 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–14 NFN–14 NFN–14 NFN–14 ... G5 ... G5, G14 16 17 18 19 ... ... ... ... 43 43 43 43 100 100 100 100 45 45 45 45 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–14 NFN–14 NFN–14 NFN–14 ... G5 ... G5, G14 20 21 22 23 24 ... ... ... ... ... 43 43 43 43 43 110 110 110 110 110 45 45 45 45 45 1650 1650 1650 1650 1650 NP NP NP NP NP 1800 1800 1800 1800 1800 650 650 650 650 650 NFN–24 NFN–24 NFN–24 NFN–24 NFN–24 G4, G4, G4, G4, G4, G5, T15, W12 T16 G5, T15 T16 G5, T15 25 26 27 28 ... ... ... ... 43 43 43 43 110 110 110 110 45 45 45 45 1650 1650 1650 1650 NP NP NP NP 1800 1800 1800 1800 650 650 650 650 NFN–24 NFN–24 NFN–24 NFN–24 G4, G4, G4, G4, T16 G5, T15 G14, T16 G5, G14, T15 29 30 31 32 ... ... ... ... 43 43 43 43 110 110 110 110 45 45 45 45 1650 1650 1650 1650 NP NP NP NP 1800 1800 1800 1800 650 650 650 650 NFN–24 NFN–24 NFN–24 NFN–24 G4, G4, G4, G4, T16 G5, T15 G14, T16 G5, G14, T15 33 34 35 36 37 ... ... ... ... ... 43 43 43 43 43 100 100 100 100 100 40 40 40 40 40 NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 650 650 650 650 650 NFN–14 NFN–14 NFN–14 NFN–14 NFN–14 G5, W12 ... G5 ... G5 38 39 40 41 42 43 ... ... ... ... ... ... 43 43 43 43 43 43 100 100 100 100 100 100 40 40 40 40 40 40 NP NP NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 800 650 650 650 650 650 650 NFN–14 NFN–14 NFN–14 NFN–14 NFN–14 NFN–14 G14 G5, G14 ... G5 G14 G5, G14 215 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 24.3 24.3 28.6 28.6 24.3 24.3 ... ... ... ... ... ... 22.9 24.3 26.9 28.6 22.9 24.3 ... ... ... ... ... ... 21.1 24.3 24.8 28.6 21.1 24.3 ... ... ... ... ... ... 19.4 23.5 22.9 27.6 19.4 23.5 ... ... ... ... ... ... 18.0 22.8 21.2 26.8 18.0 22.8 ... ... ... ... ... ... 16.9 22.3 19.9 26.2 16.9 22.3 16.5 22.1 19.4 26.0 16.5 22.1 16.2 21.9 19.1 25.7 16.2 21.9 16.0 21.6 18.8 25.4 16.0 21.6 15.9 21.4 18.7 25.2 15.9 21.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 11 28.6 28.6 28.6 28.6 28.6 ... ... ... ... ... 28.6 26.6 28.6 26.6 28.6 ... ... ... ... ... 28.5 24.5 28.5 24.5 28.5 ... ... ... ... ... 27.6 22.6 27.6 22.6 27.6 ... ... ... ... ... 26.9 21.0 26.9 21.0 26.9 ... ... ... ... ... 26.3 19.5 26.3 19.5 26.3 25.5 18.9 25.5 18.9 25.5 24.8 18.4 24.8 18.4 24.8 24.1 17.9 24.1 17.9 24.1 23.6 17.5 23.6 17.5 23.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 12 13 14 15 28.6 28.6 24.3 24.3 ... ... ... ... 26.6 28.6 22.6 24.3 ... ... ... ... 24.5 28.5 20.8 24.2 ... ... ... ... 22.6 27.6 19.2 23.5 ... ... ... ... 21.0 26.9 17.8 22.9 ... ... ... ... 19.5 26.3 16.6 22.4 18.9 25.5 16.1 21.7 18.4 24.8 15.6 21.1 17.9 24.1 15.2 20.5 17.5 23.6 14.8 20.0 ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 28.6 28.6 24.3 24.3 ... ... ... ... 26.6 28.6 22.6 24.3 ... ... ... ... 24.5 28.5 20.8 24.2 ... ... ... ... 22.6 27.6 19.2 23.5 ... ... ... ... 21.0 26.9 17.8 22.9 ... ... ... ... 19.5 26.3 16.6 22.4 18.9 25.5 16.1 21.7 18.4 24.8 15.6 21.1 17.9 24.1 15.2 20.5 17.5 23.6 14.8 20.0 ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 24 30.0 30.0 30.0 30.0 30.0 ... ... ... ... ... 30.0 28.2 30.0 28.2 30.0 ... ... ... ... ... 30.0 26.4 30.0 26.4 30.0 ... ... ... ... ... 30.0 24.7 30.0 24.7 30.0 ... ... ... ... ... 30.0 23.1 30.0 23.1 30.0 ... ... ... ... ... 29.4 22.0 29.4 22.0 29.4 29.1 21.5 29.1 21.5 29.1 28.7 21.2 28.7 21.2 28.7 28.4 21.0 28.4 21.0 28.4 28.2 20.9 28.2 20.9 28.2 28.2 20.9 28.2 20.9 28.2 28.2 20.9 28.2 20.9 28.2 28.2 20.9 28.2 20.9 28.2 25 26 27 28 30.0 30.0 25.5 25.5 ... ... ... ... 28.2 30.0 24.0 25.5 ... ... ... ... 26.4 30.0 22.4 25.5 ... ... ... ... 24.7 30.0 21.0 25.5 ... ... ... ... 23.1 30.0 19.6 25.5 ... ... ... ... 22.0 29.4 18.7 25.0 21.5 29.1 18.3 24.7 21.2 28.7 18.0 24.4 21.0 28.4 17.9 24.1 20.9 28.2 17.8 24.0 20.9 28.2 17.8 24.0 20.9 28.2 17.8 24.0 20.9 28.2 17.8 24.0 29 30 31 32 30.0 30.0 25.5 25.5 ... ... ... ... 28.2 30.0 24.0 25.5 ... ... ... ... 26.4 30.0 22.4 25.5 ... ... ... ... 24.7 30.0 21.0 25.5 ... ... ... ... 23.1 30.0 19.6 25.5 ... ... ... ... 22.0 29.4 18.7 25.0 21.5 29.1 18.3 24.7 21.2 28.7 18.0 24.4 21.0 28.4 17.9 24.1 20.9 28.2 17.8 24.0 20.9 28.2 17.8 24.0 20.9 28.2 17.8 24.0 20.9 28.2 17.8 24.0 33 34 35 36 37 26.7 26.7 26.7 26.7 26.7 ... ... ... ... ... 26.7 24.6 26.7 24.6 26.7 ... ... ... ... ... 26.7 23.0 26.7 23.0 26.7 ... ... ... ... ... 26.7 21.7 26.7 21.7 26.7 ... ... ... ... ... 26.7 20.8 26.7 20.8 26.7 ... ... ... ... ... 26.7 20.1 26.7 20.1 26.7 ... 19.9 26.7 19.9 26.7 26.5 19.6 26.5 19.6 26.5 ... 19.4 26.1 19.4 26.1 25.8 19.1 25.8 19.1 25.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 42 43 22.7 22.7 26.7 26.7 22.7 22.7 ... ... ... ... ... ... 20.9 22.7 24.6 26.7 20.9 22.7 ... ... ... ... ... ... 19.5 22.7 23.0 26.7 19.5 22.7 ... ... ... ... ... ... 18.5 22.7 21.7 26.7 18.5 22.7 ... ... ... ... ... ... 17.7 22.7 20.8 26.7 17.7 22.7 ... ... ... ... ... ... 17.1 22.7 20.1 26.7 17.1 22.7 16.9 22.7 19.9 26.7 16.9 22.7 16.7 22.5 19.6 26.5 16.7 22.5 16.5 22.2 19.4 26.1 16.5 22.2 16.2 21.9 19.1 25.8 16.2 21.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 216 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 11 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 12 13 14 15 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 24 28.2 20.9 28.2 20.9 28.2 28.2 20.9 28.2 20.9 28.2 23.2 20.9 23.2 20.9 23.2 19.0 19.0 19.0 19.0 19.0 15.6 15.6 15.6 15.6 15.6 12.9 12.9 12.9 12.9 12.9 10.6 10.6 10.6 10.6 10.6 8.5 8.5 8.5 8.5 8.5 6.7 6.7 6.7 6.7 6.7 5.3 5.3 5.3 5.3 5.3 4.1 4.1 4.1 4.1 4.1 2.9 2.9 2.9 2.9 2.9 2.1 2.1 2.1 2.1 2.1 1.5 1.5 1.5 1.5 1.5 1.1 1.1 1.1 1.1 1.1 0.70 0.70 0.70 0.70 0.70 0.45 0.45 0.45 0.45 0.45 25 26 27 28 20.9 28.2 17.8 24.0 20.9 28.2 17.8 24.0 20.9 23.2 17.8 19.7 19.0 19.0 16.2 16.2 15.6 15.6 13.3 13.3 12.9 12.9 11.0 11.0 10.6 10.6 9.0 9.0 8.5 8.5 7.2 7.2 6.7 6.7 5.7 5.7 5.3 5.3 4.5 4.5 4.1 4.1 3.5 3.5 2.9 2.9 2.5 2.5 2.1 2.1 1.8 1.8 1.5 1.5 1.3 1.3 1.1 1.1 0.94 0.94 0.70 0.70 0.60 0.60 0.45 0.45 0.38 0.38 29 30 31 32 20.9 28.2 17.8 24.0 20.9 28.2 17.8 24.0 20.9 23.2 17.8 19.7 19.0 19.0 16.2 16.2 15.6 15.6 13.3 13.3 12.9 12.9 11.0 11.0 10.6 10.6 9.0 9.0 8.5 8.5 7.2 7.2 6.7 6.7 5.7 5.7 5.3 5.3 4.5 4.5 4.1 4.1 3.5 3.5 2.9 2.9 2.5 2.5 2.1 2.1 1.8 1.8 1.5 1.5 1.3 1.3 1.1 1.1 0.94 0.94 0.70 0.70 0.60 0.60 0.45 0.45 0.38 0.38 33 34 35 36 37 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 42 43 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 217 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe Smls. pipe & tube Smls. pipe & tube Smls. & wld. fittings SB–167 SB–167 SB–366 ... ... ... N06600 N06600 N06600 Hot fin./ann. Hot fin./ann. Annealed 4 5 6 7 8 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe Smls. Smls. Smls. Smls. Smls. tube tube tube tube tube SB–167 SB–167 SB–167 SB–167 SB–167 ... ... ... ... ... N06600 N06600 N06600 N06600 N06600 Cold drawn/ann. Cold drawn/ann. Hot fin./ann. Hot fin./ann. Hot fin./ann. 9 10 11 12 13 14 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe Smls. tube Smls. tube Bar Bar Plate Plate, sheet, strip SB–163 SB–163 SB–166 SB–166 SB–168 SB–168 ... ... ... ... ... ... N06600 N06600 N06600 N06600 N06600 N06600 Annealed Annealed Annealed Annealed Annealed Annealed 15 16 17 18 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe Wld. tube Wld. tube Forgings Forgings SB–516 SB–516 SB–564 SB–564 ... ... ... ... N06600 N06600 N06600 N06600 Annealed Annealed ... Annealed 19 20 21 22 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe Smls. pipe & tube Smls. pipe & tube Wld. pipe Wld. pipe SB–167 SB–167 SB–517 SB–517 ... ... ... ... N06600 N06600 N06600 N06600 Cold Cold Cold Cold 23 24 25 26 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe 72Ni–15Cr–8Fe Bar, rod Bar, rod Plate, sheet, strip Plate, sheet, strip SB–166 SB–166 SB–168 SB–168 ... ... ... ... N06600 N06600 N06600 N06600 Hot Hot Hot Hot 27 28 29 30 60Ni–23Cr–Fe 60Ni–23Cr–Fe 60Ni–23Cr–Fe 60Ni–23Cr–Fe Smls. tube Smls. tube Bar Bar SB–163 SB–163 SB–166 SB–166 ... ... ... ... N06601 N06601 N06601 N06601 Annealed Annealed Annealed Annealed 31 32 33 34 60Ni–23Cr–Fe 60Ni–23Cr–Fe 60Ni–23Cr–Fe 60Ni–23Cr–Fe Smls. pipe & tube Smls. pipe & tube Plate, sheet, strip Plate, sheet, strip SB–167 SB–167 SB–168 SB–168 ... ... ... ... N06601 N06601 N06601 N06601 Annealed Annealed Annealed Annealed 35 36 37 38 52Ni–22Cr–13Co–9Mo 52Ni–22Cr–13Co–9Mo 52Ni–22Cr–13Co–9Mo 52Ni–22Cr–13Co–9Mo Bar, rod Bar, rod Smls. pipe & tube Smls. pipe & tube SB–166 SB–166 SB–167 SB–167 ... ... ... ... N06617 N06617 N06617 N06617 Annealed Annealed Annealed Annealed 39 40 41 42 52Ni–22Cr–13Co–9Mo 52Ni–22Cr–13Co–9Mo 52Ni–22Cr–13Co–9Mo 52Ni–22Cr–13Co–9Mo Plate, sheet, strip Plate, sheet, strip Forgings Forgings SB–168 SB–168 SB–564 SB–564 ... ... ... ... N06617 N06617 N06617 N06617 Annealed Annealed Annealed Annealed pipe pipe pipe pipe pipe & & & & & 218 drawn/ann. drawn/ann. drawn/ann. drawn/ann. fin. fin. rolled rolled This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes >5 >5 ... 43 43 43 75 75 80 25 25 30 NP NP NP 800 800 NP 1200 1200 1200 650 650 650 NFN–4 NFN–4 NFN–4 T12 G5, T11 G5, T11, W12 4 5 6 7 8 >5 >5 ... ≤5 ≤5 43 43 43 43 43 80 80 80 80 80 30 30 30 30 30 NP NP NP NP NP 800 (Cl. 3 only) 800 (Cl. 3 only) 800 800 (Cl. 3 only) NP 1200 1200 NP 1200 1200 650 650 NP 650 650 NFN–4 NFN–4 NFN–4 NFN–4 NFN–4 T12 G5, T11 G5 G5, T11 T12 9 10 11 12 13 14 ≤3 ≤3 ... ... ... ... 43 43 43 43 43 43 80 80 80 80 80 80 35 35 35 35 35 35 1200 1200 1200 1200 1200 1200 800 NP 800 NP 800 NP 1200 1200 1200 1200 1200 1200 650 650 650 650 650 650 NFN–4 NFN–4 NFN–4 NFN–4 NFN–4 NFN–4 G5, T11 T11 G5, T11 T11 G5, T11 T11 15 16 17 18 ... ... ... ... 43 43 43 43 80 80 80 80 35 35 35 35 NP NP NP NP NP NP 800 NP 1200 1200 NP 1200 650 650 NP 650 NFN–4 NFN–4 NFN–4 NFN–4 G14, T11 G5, G14, T11 G5 T11 19 20 21 22 ≤5 ≤5 ... ... 43 43 43 43 80 80 80 80 35 35 35 35 1200 1200 NP NP 800 (Cl. 3 only) 800 NP NP 1200 1200 1200 1200 650 650 650 650 NFN–4 NFN–4 NFN–4 NFN–4 T11 G5, T11 G14, T11 G5, G14, T11 23 24 25 26 ... ... ... ... 43 43 43 43 85 85 85 85 35 35 35 35 1200 1200 1200 1200 800 800 800 800 1200 1200 1200 1200 650 650 650 650 NFN–4 NFN–4 NFN–4 NFN–4 T13 G5, T12 G20, T13 G5, G20, T12 27 28 29 30 ≤3 O.D. ≤3 O.D. ... ... 43 43 43 43 80 80 80 80 30 30 30 30 1650 1650 1650 1650 NP NP NP NP 1650 1650 1650 1650 NP NP NP NP NFN–4 NFN–4 NFN–4 NFN–4 G4, G4, G4, G4, T14 G5, T13 T14 G5, T13 31 32 33 34 ... ... ... ... 43 43 43 43 80 80 80 80 30 30 30 30 1650 1650 1650 1650 NP NP NP NP 1650 1650 1650 1650 NP NP NP NP NFN–4 NFN–4 NFN–4 NFN–4 G4, G4, G4, G4, T14 G5, T13 T14 G5, T13 35 36 37 38 ... ... ... ... 43 43 43 43 95 95 95 95 35 35 35 35 1650 1650 1650 1650 NP NP NP NP 1800 1800 1800 1800 NP NP NP NP NFN–4 NFN–4 NFN–4 NFN–4 G4, G4, G4, G4, T18 G5, T17 T18 G5, T17 39 40 41 42 ... ... ... ... 43 43 43 43 95 95 95 95 35 35 35 35 1650 1650 1650 1650 NP NP NP NP 1800 1800 1800 1800 NP NP NP NP NFN–4 NFN–4 NFN–4 NFN–4 G4, G4, G4, G4, T18 G5, T17 T18 G5, T17 (Cl. (Cl. (Cl. (Cl. 3 3 3 3 only) only) only) only) 219 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 16.7 16.7 20.0 ... ... ... 15.9 16.7 20.0 ... ... ... 15.2 16.7 20.0 ... ... ... 14.6 16.7 20.0 ... ... ... 14.0 16.7 20.0 ... ... ... 13.5 16.7 20.0 13.3 16.7 20.0 13.1 16.7 20.0 12.9 16.7 20.0 12.7 16.7 20.0 12.5 16.7 20.0 12.4 16.0 16.0 10.6 10.6 10.6 4 5 6 7 8 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... 19.1 20.0 20.0 20.0 19.1 ... ... ... ... ... 18.3 20.0 20.0 20.0 18.3 ... ... ... ... ... 17.5 20.0 20.0 20.0 17.5 ... ... ... ... ... 16.8 20.0 20.0 20.0 16.8 ... ... ... ... ... 16.2 20.0 20.0 20.0 16.2 15.9 20.0 20.0 20.0 15.9 15.7 20.0 20.0 20.0 15.7 15.5 20.0 20.0 20.0 15.5 15.2 20.0 20.0 20.0 15.2 15.1 20.0 ... 20.0 15.1 14.9 16.0 ... 16.0 14.9 10.6 10.6 ... 10.6 10.6 9 10 11 12 13 14 22.9 22.9 22.9 22.9 22.9 22.9 ... ... ... ... ... ... 22.9 21.3 22.9 21.3 22.9 21.3 ... ... ... ... ... ... 22.9 20.8 22.9 20.8 22.9 20.8 ... ... ... ... ... ... 22.9 20.5 22.9 20.5 22.9 20.5 ... ... ... ... ... ... 22.9 20.2 22.9 20.2 22.9 20.2 ... ... ... ... ... ... 22.9 19.9 22.9 19.9 22.9 19.9 22.9 19.8 22.9 19.8 22.9 19.8 22.9 19.6 22.9 19.6 22.9 19.6 22.9 19.4 22.9 19.4 22.9 19.4 22.9 19.1 22.9 19.1 22.9 19.1 22.4 18.7 22.4 18.7 22.4 18.7 16.0 16.0 16.0 16.0 16.0 16.0 10.6 10.6 10.6 10.6 10.6 10.6 15 16 17 18 19.4 19.4 22.9 22.9 ... ... ... ... 18.1 19.4 22.9 21.3 ... ... ... ... 17.7 19.4 22.9 20.8 ... ... ... ... 17.4 19.4 22.9 20.5 ... ... ... ... 17.2 19.4 22.9 20.2 ... ... ... ... 16.9 19.4 22.9 19.9 16.8 19.4 22.9 19.8 16.7 19.4 22.9 19.6 16.5 19.4 22.9 19.4 16.2 19.4 22.9 19.1 15.9 19.0 ... 18.7 13.6 13.6 ... 16.0 9.0 9.0 ... 10.6 19 20 21 22 22.9 22.9 19.4 19.4 ... ... ... ... 21.3 22.9 18.1 19.4 ... ... ... ... 20.8 22.9 17.7 19.4 ... ... ... ... 20.5 22.9 17.4 19.4 ... ... ... ... 20.2 22.9 17.2 19.4 ... ... ... ... 19.9 22.9 16.9 19.4 19.8 22.9 16.8 19.4 19.6 22.9 16.7 19.4 19.4 22.9 16.5 19.4 19.1 22.9 16.2 19.4 18.7 22.4 15.9 19.0 16.0 16.0 13.6 13.6 10.6 10.6 9.0 9.0 23 24 25 26 23.3 23.3 23.3 23.3 ... ... ... ... 22.1 23.3 22.1 23.3 ... ... ... ... 21.5 23.3 21.5 23.3 ... ... ... ... 21.3 23.3 21.3 23.3 ... ... ... ... 21.3 23.3 21.3 23.3 ... ... ... ... 21.2 23.3 21.2 23.3 21.1 23.3 21.1 23.3 21.0 23.3 21.0 23.3 20.8 23.3 20.8 23.3 20.5 23.3 20.5 23.3 20.1 23.3 20.1 23.3 19.7 23.3 19.7 23.3 19.3 20.4 19.3 20.4 27 28 29 30 20.0 20.0 20.0 20.0 ... ... ... ... 17.8 20.0 17.8 20.0 ... ... ... ... 16.6 20.0 16.6 20.0 ... ... ... ... 15.5 20.0 15.5 20.0 ... ... ... ... 14.7 19.9 14.7 19.9 ... ... ... ... 14.2 19.2 14.2 19.2 14.0 19.0 14.0 19.0 13.9 18.8 13.9 18.8 13.8 18.7 13.8 18.7 13.8 18.6 13.8 18.6 13.8 18.6 13.8 18.6 13.8 18.6 13.8 18.6 13.7 18.6 13.7 18.6 31 32 33 34 20.0 20.0 20.0 20.0 ... ... ... ... 17.8 20.0 17.8 20.0 ... ... ... ... 16.6 20.0 16.6 20.0 ... ... ... ... 15.5 20.0 15.5 20.0 ... ... ... ... 14.7 19.9 14.7 19.9 ... ... ... ... 14.2 19.2 14.2 19.2 14.0 19.0 14.0 19.0 13.9 18.8 13.9 18.8 13.8 18.7 13.8 18.7 13.8 18.6 13.8 18.6 13.8 18.6 13.8 18.6 13.8 18.6 13.8 18.6 13.7 18.6 13.7 18.6 35 36 37 38 23.3 23.3 23.3 23.3 ... ... ... ... 20.8 23.3 20.8 23.3 ... ... ... ... 19.2 23.3 19.2 23.3 ... ... ... ... 18.1 23.3 18.1 23.3 ... ... ... ... 17.2 23.3 17.2 23.3 ... ... ... ... 16.6 22.5 16.6 22.5 16.4 22.1 16.4 22.1 16.2 21.9 16.2 21.9 16.0 21.7 16.0 21.7 15.9 21.5 15.9 21.5 15.8 21.3 15.8 21.3 15.7 21.2 15.7 21.2 15.6 21.0 15.6 21.0 39 40 41 42 23.3 23.3 23.3 23.3 ... ... ... ... 20.8 23.3 20.8 23.3 ... ... ... ... 19.2 23.3 19.2 23.3 ... ... ... ... 18.1 23.3 18.1 23.3 ... ... ... ... 17.2 23.3 17.2 23.3 ... ... ... ... 16.6 22.5 16.6 22.5 16.4 22.1 16.4 22.1 16.2 21.9 16.2 21.9 16.0 21.7 16.0 21.7 15.9 21.5 15.9 21.5 15.8 21.3 15.8 21.3 15.7 21.2 15.7 21.2 15.6 21.0 15.6 21.0 220 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 7.0 7.0 7.0 4.5 4.5 4.5 3.0 3.0 3.0 2.2 2.2 2.2 2.0 2.0 2.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 5 6 7 8 7.0 7.0 ... 7.0 7.0 4.5 4.5 ... 4.5 4.5 3.0 3.0 ... 3.0 3.0 2.2 2.2 ... 2.2 2.2 2.0 2.0 ... 2.0 2.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12 13 14 7.0 7.0 7.0 7.0 7.0 7.0 4.5 4.5 4.5 4.5 4.5 4.5 3.0 3.0 3.0 3.0 3.0 3.0 2.2 2.2 2.2 2.2 2.2 2.2 2.0 2.0 2.0 2.0 2.0 2.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 6.0 6.0 ... 7.0 3.8 3.8 ... 4.5 2.6 2.6 ... 3.0 1.9 1.9 ... 2.2 1.7 1.7 ... 2.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 7.0 7.0 6.0 6.0 4.5 4.5 3.8 3.8 3.0 3.0 2.6 2.6 2.2 2.2 1.9 1.9 2.0 2.0 1.7 1.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 14.5 14.5 14.5 14.5 10.3 10.3 10.3 10.3 7.2 7.2 7.2 7.2 5.8 5.8 5.8 5.8 5.5 5.5 5.5 5.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 13.7 17.6 13.7 17.6 13.6 13.6 13.6 13.6 10.4 10.4 10.4 10.4 8.0 8.0 8.0 8.0 6.1 6.1 6.1 6.1 4.6 4.6 4.6 4.6 3.6 3.6 3.6 3.6 2.8 2.8 2.8 2.8 2.1 2.1 2.1 2.1 1.7 1.7 1.7 1.7 1.3 1.3 1.3 1.3 1.1 1.1 1.1 1.1 0.87 0.87 0.87 0.87 0.71 0.71 0.71 0.71 ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 13.7 17.6 13.7 17.6 13.6 13.6 13.6 13.6 10.4 10.4 10.4 10.4 8.0 8.0 8.0 8.0 6.1 6.1 6.1 6.1 4.6 4.6 4.6 4.6 3.6 3.6 3.6 3.6 2.8 2.8 2.8 2.8 2.1 2.1 2.1 2.1 1.7 1.7 1.7 1.7 1.3 1.3 1.3 1.3 1.1 1.1 1.1 1.1 0.87 0.87 0.87 0.87 0.71 0.71 0.71 0.71 ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 38 15.5 20.9 15.5 20.9 15.4 20.9 15.4 20.9 15.4 20.8 15.4 20.8 15.3 20.7 15.3 20.7 15.3 18.1 15.3 18.1 14.5 14.5 14.5 14.5 11.2 11.2 11.2 11.2 8.7 8.7 8.7 8.7 6.6 6.6 6.6 6.6 5.1 5.1 5.1 5.1 3.9 3.9 3.9 3.9 3.0 3.0 3.0 3.0 2.3 2.3 2.3 2.3 1.8 1.8 1.8 1.8 1.4 1.4 1.4 1.4 1.1 1.1 1.1 1.1 0.73 0.73 0.73 0.73 39 40 41 42 15.5 20.9 15.5 20.9 15.4 20.9 15.4 20.9 15.4 20.8 15.4 20.8 15.3 20.7 15.3 20.7 15.3 18.1 15.3 18.1 14.5 14.5 14.5 14.5 11.2 11.2 11.2 11.2 8.7 8.7 8.7 8.7 6.6 6.6 6.6 6.6 5.1 5.1 5.1 5.1 3.9 3.9 3.9 3.9 3.0 3.0 3.0 3.0 2.3 2.3 2.3 2.3 1.8 1.8 1.8 1.8 1.4 1.4 1.4 1.4 1.1 1.1 1.1 1.1 0.73 0.73 0.73 0.73 221 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 60Ni–22Cr–9Mo–3.5Cb 60Ni–22Cr–9Mo–3.5Cb 60Ni–22Cr–9Mo–3.5Cb 60Ni–22Cr–9Mo–3.5Cb 60Ni–22Cr–9Mo–3.5Cb 60Ni–22Cr–9Mo–3.5Cb Plate, sheet, strip Plate, sheet, strip Smls. pipe & tube Smls. pipe & tube Bar Bar SB–443 SB–443 SB–444 SB–444 SB–446 SB–446 2 2 2 2 2 2 N06625 N06625 N06625 N06625 N06625 N06625 Solution Solution Solution Solution Solution Solution 7 8 9 60Ni–22Cr–9Mo–3.5Cb 60Ni–22Cr–9Mo–3.5Cb 60Ni–22Cr–9Mo–3.5Cb Smls. & wld. fittings Bar Forgings SB–366 SB–446 SB–564 ... 1 ... N06625 N06625 N06625 Annealed Annealed Annealed 10 11 12 13 60Ni–22Cr–9Mo–3.5Cb 60Ni–22Cr–9Mo–3.5Cb 60Ni–22Cr–9Mo–3.5Cb 60Ni–22Cr–9Mo–3.5Cb Plate, sheet, strip Plate, sheet, strip Smls. pipe Bar SB–443 SB–443 SB–444 SB–446 1 1 1 1 N06625 N06625 N06625 N06625 Annealed Annealed Annealed Annealed 14 15 16 60Ni–22Cr–9Mo–3.5Cb 60Ni–22Cr–9Mo–3.5Cb 60Ni–22Cr–9Mo–3.5Cb Forgings Wld. tube Wld. pipe SB–564 SB–704 SB–705 ... ... 1 N06625 N06625 N06625 Annealed Annealed Annealed 17 18 19 20 21 22 Ni–Cr–Mo–W Ni–Cr–Mo–W Ni–Cr–Mo–W Ni–Cr–Mo–W Ni–Cr–Mo–W Ni–Cr–Mo–W Forged fittings Forged fittings Forgings Forgings Rod Rod SB–462 SB–462 SB–564 SB–564 SB–574 SB–574 ... ... ... ... ... ... N06686 N06686 N06686 N06686 N06686 N06686 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 23 24 25 26 Ni–Cr–Mo–W Ni–Cr–Mo–W Ni–Cr–Mo–W Ni–Cr–Mo–W Plate, sheet, strip Plate, sheet, strip Wld. pipe Wld. pipe SB–575 SB–575 SB–619 SB–619 ... ... ... ... N06686 N06686 N06686 N06686 Solution Solution Solution Solution ann. ann. ann. ann. 27 28 29 30 Ni–Cr–Mo–W Ni–Cr–Mo–W Ni–Cr–Mo–W Ni–Cr–Mo–W Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–622 SB–622 SB–626 SB–626 ... ... ... ... N06686 N06686 N06686 N06686 Solution Solution Solution Solution ann. ann. ann. ann. 31 32 33 34 35 36 58Ni–29Cr–9Fe 58Ni–29Cr–9Fe 58Ni–29Cr–9Fe 58Ni–29Cr–9Fe 58Ni–29Cr–9Fe 58Ni–29Cr–9Fe Bar, rod Bar, rod Plate, sheet, strip Plate, sheet, strip Smls. pipe & tube Smls. pipe & tube SB–166 SB–166 SB–168 SB–168 SB–167 SB–167 ... ... ... ... ... ... N06690 N06690 N06690 N06690 N06690 N06690 Annealed Annealed Annealed Annealed Cold drawn/ann. Cold drawn/ann. 37 38 39 40 49Ni–25Cr–18Fe–6Mo 49Ni–25Cr–18Fe–6Mo 49Ni–25Cr–18Fe–6Mo 49Ni–25Cr–18Fe–6Mo Plate, sheet, strip Plate, sheet, strip Wld. pipe Wld. pipe SB–582 SB–582 SB–619 SB–619 ... ... ... ... N06975 N06975 N06975 N06975 Solution Solution Solution Solution ann. ann. ann. ann. 41 42 43 44 49Ni–25Cr–18Fe–6Mo 49Ni–25Cr–18Fe–6Mo 49Ni–25Cr–18Fe–6Mo 49Ni–25Cr–18Fe–6Mo Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–622 SB–622 SB–626 SB–626 ... ... ... ... N06975 N06975 N06975 N06975 Solution Solution Solution Solution ann. ann. ann. ann. 222 ann. ann. ann. ann. ann. ann. This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... ... ... ... 43 43 43 43 43 43 100 100 100 100 100 100 40 40 40 40 40 40 1100 1100 1100 1100 1100 1100 NP NP NP NP NP NP 1600 1600 1600 1600 1600 1600 650 650 650 650 650 650 NFN–22 NFN–22 NFN–22 NFN–22 NFN–22 NFN–22 G4, G4, G4, G4, G4, G4, 7 8 9 ... 4 < t ≤ 10 4 < t ≤ 10 43 43 43 110 110 110 50 50 50 1100 1100 1100 NP 800 800 1200 1200 1200 650 650 650 NFN–17 NFN–17 NFN–17 G23, T16, W12 G23, T16 G23, T16 10 11 12 13 ... ... ... ≤4 43 43 43 43 110 120 120 120 55 60 60 60 1100 1100 1100 1100 800 NP 800 800 1200 1200 1200 1200 650 650 650 650 NFN–17 NFN–17 NFN–17 NFN–17 G23, G22, G23, G22, 14 15 16 ≤4 ... ... 43 43 43 120 120 120 60 60 60 1100 1100 1100 800 800 NP 1200 1200 1200 650 650 650 NFN–17 NFN–17 NFN–17 G22, G23, T16 G14, G23, T16 G14, G23, T16 17 18 19 20 21 22 ≤31/2 ≤31/2 ... ... ≤31/2 ≤31/2 43 43 43 43 43 43 100 100 100 100 100 100 45 45 45 45 45 45 NP NP NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 800 NP NP NP NP NP NP NFN–10 NFN–10 NFN–10 NFN–10 NFN–10 NFN–10 G5 ... G5 ... G5 ... 23 24 25 26 ... ... ≤8 ≤8 43 43 43 43 100 100 100 100 45 45 45 45 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–10 NFN–10 NFN–10 NFN–10 G5 ... G5, G14 G14 27 28 29 30 ... ... ≤31/2 ≤31/2 43 43 43 43 100 100 100 100 45 45 45 45 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–10 NFN–10 NFN–10 NFN–10 G5 ... G5, G14 G14 31 32 33 34 35 36 ... ... ... ... ... ... 43 43 43 43 43 43 85 85 85 85 85 85 35 35 35 35 35 35 NP NP NP NP 1200 1200 NP NP NP NP NP NP 850 850 850 850 850 850 650 650 650 650 650 650 NFN–4 NFN–4 NFN–4 NFN–4 NFN–4 NFN–4 ... G5 ... G5 H3, T12 G5, H3, T12 37 38 39 40 ... ... ... ... 45 45 45 45 85 85 85 85 32 32 32 32 NP NP NP NP NP NP NP NP 800 800 800 800 650 650 650 650 NFN–11 NFN–11 NFN–11 NFN–11 ... G5 G14 G5, G14 41 42 43 44 ... ... ... ... 45 45 45 45 85 85 85 85 32 32 32 32 NP NP NP NP NP NP NP NP 800 800 800 800 650 650 650 650 NFN–11 NFN–11 NFN–11 NFN–11 ... G5 G14 G5, G14 223 G5, G23, T17, W13 G23, T18, W13 G5, G23, T17, W13 G23, T18, W13 G5, G23, T17, W13 G23, T18, W13 T16 G23, T16 T16 G23, T16 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 26.7 26.7 26.7 26.7 26.7 26.7 ... ... ... ... ... ... 26.7 24.6 26.7 24.6 26.7 24.6 ... ... ... ... ... ... 26.7 23.4 26.7 23.4 26.7 23.4 ... ... ... ... ... ... 26.7 22.4 26.7 22.4 26.7 22.4 ... ... ... ... ... ... 26.7 21.7 26.7 21.7 26.7 21.7 ... ... ... ... ... ... 26.7 21.0 26.7 21.0 26.7 21.0 26.7 20.8 26.7 20.8 26.7 20.8 26.7 20.5 26.7 20.5 26.7 20.5 26.7 20.3 26.7 20.3 26.7 20.3 26.7 20.1 26.7 20.1 26.7 20.1 26.7 20.0 26.7 20.0 26.7 20.0 26.7 19.8 26.7 19.8 26.7 19.8 26.6 19.7 26.6 19.7 26.6 19.7 7 8 9 31.4 31.4 31.4 ... ... ... 31.4 31.4 31.4 ... ... ... 31.4 31.4 31.4 ... ... ... 30.8 30.8 30.8 ... ... ... 30.2 30.2 30.2 ... ... ... 29.7 29.7 29.7 29.4 29.4 29.4 29.1 29.1 29.1 28.9 28.9 28.9 28.6 28.6 28.6 28.3 28.3 28.3 28.0 28.0 28.0 27.7 27.7 27.7 10 11 12 13 31.4 34.3 34.3 34.3 ... ... ... ... 31.4 34.3 34.3 34.3 ... ... ... ... 31.4 34.3 34.3 34.3 ... ... ... ... 30.8 33.6 33.6 33.6 ... ... ... ... 30.2 32.9 32.9 32.9 ... ... ... ... 29.7 32.4 32.4 32.4 29.4 32.1 32.1 32.1 29.1 31.8 31.8 31.8 28.9 31.5 31.5 31.5 28.6 31.2 31.2 31.2 28.3 30.9 30.9 30.9 28.0 30.6 30.6 30.6 27.7 30.3 30.3 30.3 14 15 16 34.3 29.1 29.1 ... ... ... 34.3 29.1 29.1 ... ... ... 34.3 29.1 29.1 ... ... ... 33.6 28.5 28.5 ... ... ... 32.9 28.0 28.0 ... ... ... 32.4 27.5 27.5 32.1 27.3 27.3 31.8 27.0 27.0 31.5 26.8 26.8 31.2 26.5 26.5 30.9 26.3 26.3 30.6 26.0 26.0 30.3 25.7 25.7 17 18 19 20 21 22 28.6 28.6 28.6 28.6 28.6 28.6 ... ... ... ... ... ... 28.6 24.9 28.6 24.9 28.6 24.9 ... ... ... ... ... ... 28.2 23.4 28.2 23.4 28.2 23.4 ... ... ... ... ... ... 27.2 22.5 27.2 22.5 27.2 22.5 ... ... ... ... ... ... 26.5 21.6 26.5 21.6 26.5 21.6 ... ... ... ... ... ... 25.9 20.8 25.9 20.8 25.9 20.8 25.7 20.4 25.7 20.4 25.7 20.4 25.4 20.1 25.4 20.1 25.4 20.1 25.2 19.9 25.2 19.9 25.2 19.9 24.9 19.9 24.9 19.9 24.9 19.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 28.6 28.6 24.3 24.3 ... ... ... ... 28.6 24.9 24.3 21.2 ... ... ... ... 28.2 23.4 24.0 19.9 ... ... ... ... 27.2 22.5 23.1 19.1 ... ... ... ... 26.5 21.6 22.5 18.4 ... ... ... ... 25.9 20.8 22.0 17.7 25.7 20.4 21.8 17.3 25.4 20.1 21.6 17.1 25.2 19.9 21.4 16.9 24.9 19.9 21.2 16.9 ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 28.6 28.6 24.3 24.3 ... ... ... ... 28.6 24.9 24.3 21.2 ... ... ... ... 28.2 23.4 24.0 19.9 ... ... ... ... 27.2 22.5 23.1 19.1 ... ... ... ... 26.5 21.6 22.5 18.4 ... ... ... ... 25.9 20.8 22.0 17.7 25.7 20.4 21.8 17.3 25.4 20.1 21.6 17.1 25.2 19.9 21.4 16.9 24.9 19.9 21.2 16.9 ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 35 36 23.3 23.3 23.3 23.3 23.3 23.3 ... ... ... ... ... ... 21.1 23.3 21.1 23.3 21.1 23.3 ... ... ... ... ... ... 19.9 23.3 19.9 23.3 19.9 23.3 ... ... ... ... ... ... 19.1 23.3 19.1 23.3 19.1 23.3 ... ... ... ... ... ... 18.6 23.1 18.6 23.1 18.6 23.1 ... ... ... ... ... ... 18.4 22.9 18.4 22.9 18.4 22.9 18.4 22.9 18.4 22.9 18.4 22.9 18.4 22.8 18.4 22.8 18.4 22.8 18.4 22.7 18.4 22.7 18.4 22.7 18.4 22.6 18.4 22.6 18.4 22.6 18.4 22.5 18.4 22.5 18.4 22.5 ... ... ... ... 18.3 22.2 ... ... ... ... 16.5 16.5 37 38 39 40 21.3 21.3 18.1 18.1 ... ... ... ... 19.5 21.3 16.6 18.1 ... ... ... ... 18.5 21.3 15.7 18.1 ... ... ... ... 17.5 21.3 14.9 18.1 ... ... ... ... 16.5 21.3 14.0 18.1 ... ... ... ... 15.6 21.1 13.3 17.9 15.3 20.6 13.0 17.5 15.0 20.2 12.7 17.2 14.8 20.0 12.6 17.0 14.7 19.8 12.5 16.8 ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 21.3 21.3 18.1 18.1 ... ... ... ... 19.5 21.3 16.6 18.1 ... ... ... ... 18.5 21.3 15.7 18.1 ... ... ... ... 17.5 21.3 14.9 18.1 ... ... ... ... 16.5 21.3 14.0 18.1 ... ... ... ... 15.6 21.1 13.3 17.9 15.3 20.6 13.0 17.5 15.0 20.2 12.7 17.2 14.8 20.0 12.6 17.0 14.7 19.8 12.5 16.8 ... ... ... ... ... ... ... ... ... ... ... ... 224 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 26.4 19.6 26.4 19.6 26.4 19.6 26.3 19.5 26.3 19.5 26.3 19.5 26.2 19.4 26.2 19.4 26.2 19.4 26.1 19.3 26.1 19.3 26.1 19.3 20.0 19.3 20.0 19.3 20.0 19.3 15.0 15.0 15.0 15.0 15.0 15.0 11.6 11.6 11.6 11.6 11.6 11.6 8.5 8.5 8.5 8.5 8.5 8.5 6.7 6.7 6.7 6.7 6.7 6.7 4.9 4.9 4.9 4.9 4.9 4.9 3.8 3.8 3.8 3.8 3.8 3.8 2.6 2.6 2.6 2.6 2.6 2.6 1.9 1.9 1.9 1.9 1.9 1.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 27.4 27.4 27.4 27.0 27.0 27.0 26.6 26.6 26.6 21.0 21.0 21.0 13.2 13.2 13.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 27.4 29.9 29.9 29.9 27.0 29.5 29.5 29.5 26.6 29.0 29.0 29.0 21.0 21.0 21.0 21.0 13.2 13.2 13.2 13.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 29.9 25.4 25.4 29.5 25.1 25.1 29.0 24.7 24.7 21.0 17.9 17.9 13.2 11.2 11.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17 18 19 20 21 22 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 35 36 ... ... ... ... 11.6 11.6 ... ... ... ... 9.0 9.0 ... ... ... ... 6.5 6.5 ... ... ... ... 4.5 4.5 ... ... ... ... 3.0 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 225 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 47Ni–22Cr–20Fe–7Mo 47Ni–22Cr–20Fe–7Mo 47Ni–22Cr–20Fe–7Mo 47Ni–22Cr–20Fe–7Mo Rod Rod Plate, sheet, strip Plate, sheet, strip SB–581 SB–581 SB–582 SB–582 ... ... ... ... N06985 N06985 N06985 N06985 Annealed Annealed Annealed Annealed 5 6 7 8 9 47Ni–22Cr–20Fe–7Mo 47Ni–22Cr–20Fe–7Mo 47Ni–22Cr–20Fe–7Mo 47Ni–22Cr–20Fe–7Mo 47Ni–22Cr–20Fe–7Mo Smls. & wld. fittings Rod Rod Plate, sheet, strip Plate, sheet, strip SB–366 SB–581 SB–581 SB–582 SB–582 ... ... ... ... ... N06985 N06985 N06985 N06985 N06985 Annealed Annealed Annealed Annealed Annealed 10 11 12 13 14 15 47Ni–22Cr–20Fe–7Mo 47Ni–22Cr–20Fe–7Mo 47Ni–22Cr–20Fe–7Mo 47Ni–22Cr–20Fe–7Mo 47Ni–22Cr–20Fe–7Mo 47Ni–22Cr–20Fe–7Mo Wld. pipe Wld. pipe Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–619 SB–619 SB–622 SB–622 SB–626 SB–626 ... ... ... ... ... ... N06985 N06985 N06985 N06985 N06985 N06985 Annealed Annealed Annealed Annealed Annealed Annealed 16 17 18 19 35Ni–35Fe–20Cr–Cb 35Ni–35Fe–20Cr–Cb 35Ni–35Fe–20Cr–Cb 35Ni–35Fe–20Cr–Cb Forgings Forgings Plate Plate SB–462 SB–462 SB–463 SB–463 ... ... ... ... N08020 N08020 N08020 N08020 Annealed Annealed Annealed Annealed 20 21 22 23 35Ni–35Fe–20Cr–Cb 35Ni–35Fe–20Cr–Cb 35Ni–35Fe–20Cr–Cb 35Ni–35Fe–20Cr–Cb Bar Bar Smls. pipe & tube Smls. pipe & tube SB–473 SB–473 SB–729 SB–729 ... ... ... ... N08020 N08020 N08020 N08020 Annealed Annealed Annealed Annealed 24 25 26 35Ni–35Fe–20Cr–Cb 35Ni–35Fe–20Cr–Cb 35Ni–35Fe–20Cr–Cb Wld. pipe Wld. pipe Wld. pipe SB–464 SB–464 SB–464 ... ... ... N08020 N08020 N08020 Wld. ann. Wld. ann. Wld. ann. 27 28 29 30 35Ni–35Fe–20Cr–Cb 35Ni–35Fe–20Cr–Cb 35Ni–35Fe–20Cr–Cb 35Ni–35Fe–20Cr–Cb Wld. tube Wld. tube Wld. tube Smls. & wld. fittings SB–468 SB–468 SB–468 SB–366 ... ... ... ... N08020 N08020 N08020 N08020 Wld. ann. Wld. ann. Wld. ann. Annealed 31 32 33 34 35 36 37Ni–33Fe–23Cr–4Mo–Cu 37Ni–33Fe–23Cr–4Mo–Cu 37Ni–33Fe–23Cr–4Mo–Cu 37Ni–33Fe–23Cr–4Mo–Cu 37Ni–33Fe–23Cr–4Mo–Cu 37Ni–33Fe–23Cr–4Mo–Cu Plate, sheet, strip Plate, sheet, strip Wld. pipe Wld. pipe Wld. tube Wld. tube SB–463 SB–463 SB–464 SB–464 SB–468 SB–468 ... ... ... ... ... ... N08024 N08024 N08024 N08024 N08024 N08024 Annealed Annealed Wld. ann. Wld. ann. Wld. ann. Wld. ann. 37 38 39 40 41 42 35Ni–30Fe–24Cr–6Mo–Cu 35Ni–30Fe–24Cr–6Mo–Cu 35Ni–30Fe–24Cr–6Mo–Cu 35Ni–30Fe–24Cr–6Mo–Cu 35Ni–30Fe–24Cr–6Mo–Cu 35Ni–30Fe–24Cr–6Mo–Cu Plate, sheet, strip Plate, sheet, strip Wld. pipe Wld. pipe Wld. tube Wld. tube SB–463 SB–463 SB–464 SB–464 SB–468 SB–468 ... ... ... ... ... ... N08026 N08026 N08026 N08026 N08026 N08026 Annealed Annealed Wld. ann. Wld. ann. Wld. ann. Wld. ann. 226 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) P-No. Min. Tensile Strength, ksi 1 2 3 4 3 > /4 >3/4 >3/4 >3/4 45 45 45 45 85 85 85 85 5 6 7 8 9 ... ≤3/4 ≤3/4 ≤3/4 ≤3/4 45 45 45 45 45 10 11 12 13 14 15 ... ... ... ... ... ... 16 17 18 19 Min. Yield Strength, ksi III VIII-1 XII 30 30 30 30 NP NP NP NP NP NP NP NP 800 800 800 800 650 650 650 650 NFN–19 NFN–19 NFN–19 NFN–19 ... G5 ... G5 90 90 90 90 90 35 35 35 35 35 NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 650 650 650 650 650 NFN–18 NFN–18 NFN–18 NFN–18 NFN–18 G5, W12 ... G5 ... G5 45 45 45 45 45 45 90 90 90 90 90 90 35 35 35 35 35 35 NP NP NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 800 650 650 650 650 650 650 NFN–18 NFN–18 NFN–18 NFN–18 NFN–18 NFN–18 G14 G5, G14 ... G5 G14 G5, G14 ... ... ... ... 45 45 45 45 80 80 80 80 35 35 35 35 NP NP NP NP 800 NP NP 800 800 800 800 800 650 650 650 650 NFN–12 NFN–12 NFN–12 NFN–12 G5 ... ... G5 20 21 22 23 ... ... ... ... 45 45 45 45 80 80 80 80 35 35 35 35 NP NP NP NP 800 NP NP NP 800 800 800 800 650 650 650 650 NFN–12 NFN–12 NFN–12 NFN–12 G5 ... ... G5 24 25 26 ... ... ... 45 45 45 80 80 80 35 35 35 NP NP NP 800 NP NP NP 800 800 NP 650 650 NFN–12 NFN–12 NFN–12 G5, W5 G14 G5, G14 27 28 29 30 ... ... ... ... 45 45 45 45 80 80 80 85 35 35 35 40 NP NP NP NP 800 NP NP NP NP 800 800 800 NP 650 650 650 NFN–12 NFN–12 NFN–12 NFN–12 G5, W5 G14 G5, G14 G5, W12 31 32 33 34 35 36 ... ... ... ... ... ... 45 45 45 45 45 45 80 80 80 80 80 80 35 35 35 35 35 35 NP NP NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 800 650 650 650 650 650 650 NFN–13 NFN–13 NFN–13 NFN–13 NFN–13 NFN–13 ... G5 G14 G5, G14 G14 G5, G14 37 38 39 40 41 42 ... ... ... ... ... ... 45 45 45 45 45 45 80 80 80 80 80 80 35 35 35 35 35 35 NP NP NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 800 650 650 650 650 650 650 NFN–13 NFN–13 NFN–13 NFN–13 NFN–13 NFN–13 ... G5 G14 G5, G14 G14 G5, G14 227 Notes This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. I External Pressure Chart No. Line No. Size/ Thickness, in. Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 20.0 20.0 20.0 20.0 ... ... ... ... 17.8 20.0 17.8 20.0 ... ... ... ... 16.2 20.0 16.2 20.0 ... ... ... ... 14.9 20.0 14.9 20.0 ... ... ... ... 13.9 18.8 13.9 18.8 ... ... ... ... 13.1 17.7 13.1 17.7 12.8 17.3 12.8 17.3 12.5 16.9 12.5 16.9 12.3 16.5 12.3 16.5 12.0 16.2 12.0 16.2 ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 9 23.3 23.3 23.3 23.3 23.3 ... ... ... ... ... 23.3 20.8 23.3 20.8 23.3 ... ... ... ... ... 23.3 18.9 23.3 18.9 23.3 ... ... ... ... ... 23.3 17.4 23.3 17.4 23.3 ... ... ... ... ... 21.9 16.2 21.9 16.2 21.9 ... ... ... ... ... 20.7 15.3 20.7 15.3 20.7 20.2 14.9 20.2 14.9 20.2 19.7 14.6 19.7 14.6 19.7 19.3 14.3 19.3 14.3 19.3 18.9 14.0 18.9 14.0 18.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 14 15 19.8 19.8 23.3 23.3 19.8 19.8 ... ... ... ... ... ... 17.7 19.8 20.8 23.3 17.7 19.8 ... ... ... ... ... ... 16.1 19.8 18.9 23.3 16.1 19.8 ... ... ... ... ... ... 14.8 19.8 17.4 23.3 14.8 19.8 ... ... ... ... ... ... 13.8 18.6 16.2 21.9 13.8 18.6 ... ... ... ... ... ... 13.0 17.6 15.3 20.7 13.0 17.6 12.7 17.1 14.9 20.2 12.7 17.1 12.4 16.8 14.6 19.7 12.4 16.8 12.1 16.4 14.3 19.3 12.1 16.4 11.9 16.1 14.0 18.9 11.9 16.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 22.9 22.9 22.9 22.9 ... ... ... ... 22.9 20.6 20.6 22.9 ... ... ... ... 22.6 19.7 19.7 22.6 ... ... ... ... 22.2 18.9 18.9 22.2 ... ... ... ... 22.1 18.2 18.2 22.1 ... ... ... ... 22.1 17.7 17.7 22.1 22.0 17.5 17.5 22.0 21.9 17.4 17.4 21.9 21.8 17.2 17.2 21.8 21.8 16.8 16.8 21.8 ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 22.9 22.9 22.9 22.9 ... ... ... ... 22.9 20.6 20.6 22.9 ... ... ... ... 22.6 19.7 19.7 22.6 ... ... ... ... 22.2 18.9 18.9 22.2 ... ... ... ... 22.1 18.2 18.2 22.1 ... ... ... ... 22.1 17.7 17.7 22.1 22.0 17.5 17.5 22.0 21.9 17.4 17.4 21.9 21.8 17.2 17.2 21.8 21.8 16.8 16.8 21.8 ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 22.9 19.4 19.4 ... ... ... 22.9 17.5 19.4 ... ... ... 22.6 16.7 19.2 ... ... ... 22.2 16.1 18.8 ... ... ... 22.1 15.5 18.8 ... ... ... 22.1 15.0 18.8 22.0 14.9 18.7 21.9 14.8 18.6 21.8 14.6 18.5 21.8 14.3 18.5 ... ... ... ... ... ... ... ... ... 27 28 29 30 22.9 19.4 19.4 22.9 ... ... ... ... 22.9 17.5 19.4 22.9 ... ... ... ... 22.6 16.7 19.2 22.6 ... ... ... ... 22.2 16.1 18.8 22.2 ... ... ... ... 22.1 15.5 18.8 22.1 ... ... ... ... 22.1 15.0 18.8 22.1 22.0 14.9 18.7 22.0 21.9 14.8 18.6 21.9 21.8 14.6 18.5 21.8 21.8 14.3 18.5 21.8 ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 35 36 22.9 22.9 19.4 19.4 19.4 19.4 ... ... ... ... ... ... 20.6 22.9 17.5 19.4 17.5 19.4 ... ... ... ... ... ... 19.2 22.6 16.3 19.2 16.3 19.2 ... ... ... ... ... ... 18.1 21.9 15.4 18.6 15.4 18.6 ... ... ... ... ... ... 17.0 21.4 14.5 18.2 14.5 18.2 ... ... ... ... ... ... 16.0 20.8 13.6 17.7 13.6 17.7 15.6 20.6 13.2 17.5 13.2 17.5 15.2 20.4 12.9 17.3 12.9 17.3 14.8 20.0 12.6 17.0 12.6 17.0 14.6 19.6 12.4 16.7 12.4 16.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 41 42 22.9 22.9 19.4 19.4 19.4 19.4 ... ... ... ... ... ... 20.7 22.9 17.6 19.4 17.6 19.4 ... ... ... ... ... ... 19.0 22.5 16.1 19.1 16.1 19.1 ... ... ... ... ... ... 17.5 21.8 14.9 18.5 14.9 18.5 ... ... ... ... ... ... 16.3 21.2 13.8 18.0 13.8 18.0 ... ... ... ... ... ... 15.3 20.6 13.0 17.5 13.0 17.5 14.9 20.1 12.7 17.1 12.7 17.1 14.5 19.6 12.4 16.7 12.4 16.7 14.2 19.2 12.1 16.3 12.1 16.3 13.9 18.8 11.9 16.0 11.9 16.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 228 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 10 11 12 13 14 15 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 35 36 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 37 38 39 40 41 42 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 229 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 31Ni–31Fe–29Cr–Mo 31Ni–31Fe–29Cr–Mo 31Ni–31Fe–29Cr–Mo 31Ni–31Fe–29Cr–Mo Smls. tube Smls. tube Plate, sheet, strip Plate, sheet, strip SB–668 SB–668 SB–709 SB–709 ... ... ... ... N08028 N08028 N08028 N08028 Annealed Annealed Annealed Annealed 5 6 7 31Ni–33Fe–27Cr–6.5Mo–Cu–N 31Ni–33Fe–27Cr–6.5Mo–Cu–N 31Ni–33Fe–27Cr–6.5Mo–Cu–N Smls. & wld. fittings Forged fittings Forged fittings SB–366 SB–462 SB–462 ... ... ... N08031 N08031 N08031 Solution ann. Solution ann. Solution ann. 8 9 10 11 31Ni–33Fe–27Cr–6.5Mo–Cu–N 31Ni–33Fe–27Cr–6.5Mo–Cu–N 31Ni–33Fe–27Cr–6.5Mo–Cu–N 31Ni–33Fe–27Cr–6.5Mo–Cu–N Forgings Forgings Rod Rod SB–564 SB–564 SB–581 SB–581 ... ... ... ... N08031 N08031 N08031 N08031 Solution Solution Solution Solution ann. ann. ann. ann. 12 13 14 15 31Ni–33Fe–27Cr–6.5Mo–Cu–N 31Ni–33Fe–27Cr–6.5Mo–Cu–N 31Ni–33Fe–27Cr–6.5Mo–Cu–N 31Ni–33Fe–27Cr–6.5Mo–Cu–N Wld. pipe Wld. pipe Smls. pipe & tube Smls. pipe & tube SB–619 SB–619 SB–622 SB–622 ... ... ... ... N08031 N08031 N08031 N08031 Solution Solution Solution Solution ann. ann. ann. ann. 16 17 18 19 31Ni–33Fe–27Cr–6.5Mo–Cu–N 31Ni–33Fe–27Cr–6.5Mo–Cu–N 31Ni–33Fe–27Cr–6.5Mo–Cu–N 31Ni–33Fe–27Cr–6.5Mo–Cu–N Plate, sheet, strip Plate, sheet, strip Wld. tube Wld. tube SB–625 SB–625 SB–626 SB–626 ... ... ... ... N08031 N08031 N08031 N08031 Solution Solution Solution Solution ann. ann. ann. ann. 20 21 22 37Ni–33Fe–25Cr 37Ni–33Fe–25Cr 37Ni–33Fe–25Cr Condenser tube Condenser tube Smls. & wld. fittings SB–163 SB–163 SB–366 ... ... ... N08120 N08120 N08120 Solution ann. Solution ann. Solution ann. 23 24 25 26 27 28 37Ni–33Fe–25Cr 37Ni–33Fe–25Cr 37Ni–33Fe–25Cr 37Ni–33Fe–25Cr 37Ni–33Fe–25Cr 37Ni–33Fe–25Cr Smls. pipe & tube Smls. pipe & tube Bar, rod Bar, rod Plate, sheet, strip Plate, sheet, strip SB–407 SB–407 SB–408 SB–408 SB–409 SB–409 ... ... ... ... ... ... N08120 N08120 N08120 N08120 N08120 N08120 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 29 30 31 32 33 34 37Ni–33Fe–25Cr 37Ni–33Fe–25Cr 37Ni–33Fe–25Cr 37Ni–33Fe–25Cr 37Ni–33Fe–25Cr 37Ni–33Fe–25Cr Wld. pipe Wld. pipe Wld. tube Wld. tube Forgings Forgings SB–514 SB–514 SB–515 SB–515 SB–564 SB–564 ... ... ... ... ... ... N08120 N08120 N08120 N08120 N08120 N08120 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 35 36 37 38 26Ni–43Fe–22Cr–5Mo 26Ni–43Fe–22Cr–5Mo 26Ni–43Fe–22Cr–5Mo 26Ni–43Fe–22Cr–5Mo Wld. pipe Wld. pipe Plate, sheet, strip Plate, sheet, strip SB–619 SB–619 SB–620 SB–620 ... ... ... ... N08320 N08320 N08320 N08320 Solution Solution Solution Solution ann. ann. ann. ann. 39 40 41 42 43 44 26Ni–43Fe–22Cr–5Mo 26Ni–43Fe–22Cr–5Mo 26Ni–43Fe–22Cr–5Mo 26Ni–43Fe–22Cr–5Mo 26Ni–43Fe–22Cr–5Mo 26Ni–43Fe–22Cr–5Mo Rod Rod Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–621 SB–621 SB–622 SB–622 SB–626 SB–626 ... ... ... ... ... ... N08320 N08320 N08320 N08320 N08320 N08320 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 230 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... ... 45 45 45 45 73 73 73 73 31 31 31 31 NP NP NP NP 600 600 NP NP 850 850 850 850 650 650 650 650 NFN–13 NFN–13 NFN–13 NFN–13 ... G5 ... G5 5 6 7 ... ... ... 45 45 45 94 94 94 40 40 40 NP NP NP NP NP NP 800 800 800 NP NP NP NFN–11 NFN–11 NFN–11 G5, W12 ... G5 8 9 10 11 ... ... ... ... 45 45 45 45 94 94 94 94 40 40 40 40 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–11 NFN–11 NFN–11 NFN–11 ... G5 ... G5 12 13 14 15 ... ... ... ... 45 45 45 45 94 94 94 94 40 40 40 40 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–11 NFN–11 NFN–11 NFN–11 G14 G5, G14 ... G5 16 17 18 19 ... ... ... ... 45 45 45 45 94 94 94 94 40 40 40 40 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–11 NFN–11 NFN–11 NFN–11 ... G5 G14 G5, G14 20 21 22 ... ... ... 45 45 45 90 90 90 40 40 40 NP NP NP NP NP NP 1650 1650 1650 NP NP NP NFN–9 NFN–9 NFN–9 G4, G14, T16 G4, G5, G14, T15 G4, G5, T15, W12 23 24 25 26 27 28 ... ... ... ... ... ... 45 45 45 45 45 45 90 90 90 90 90 90 40 40 40 40 40 40 NP NP NP NP NP NP NP NP NP NP NP NP 1650 1650 1650 1650 1650 1650 NP NP NP NP NP NP NFN–9 NFN–9 NFN–9 NFN–9 NFN–9 NFN–9 G4, G4, G4, G4, G4, G4, T16 G5, T15 T16 G5, T15 T16 G5, T15 29 30 31 32 33 34 ... ... ... ... ... ... 45 45 45 45 45 45 90 90 90 90 90 90 40 40 40 40 40 40 NP NP NP NP NP NP NP NP NP NP NP NP 1650 1650 1650 1650 1650 1650 NP NP NP NP NP NP NFN–9 NFN–9 NFN–9 NFN–9 NFN–9 NFN–9 G4, G4, G4, G4, G4, G4, G14, T16 G5, G14, T15 G14, T16 G5, G14, T15 T16 G5, T15 35 36 37 38 ... ... ... ... 45 45 45 45 75 75 75 75 28 28 28 28 NP NP NP NP NP NP NP NP 800 800 800 800 650 650 650 650 NFN–13 NFN–13 NFN–13 NFN–13 G14 G5, G14 ... G5 39 40 41 42 43 44 ... ... ... ... ... ... 45 45 45 45 45 45 75 75 75 75 75 75 28 28 28 28 28 28 NP NP NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 800 650 650 650 650 650 650 NFN–13 NFN–13 NFN–13 NFN–13 NFN–13 NFN–13 ... G5 ... G5 G14 G5, G14 231 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 20.7 20.7 20.7 20.7 ... ... ... ... 18.9 20.7 18.9 20.7 ... ... ... ... 17.7 20.1 17.7 20.1 ... ... ... ... 16.5 19.3 16.5 19.3 ... ... ... ... 15.4 18.7 15.4 18.7 ... ... ... ... 14.4 18.2 14.4 18.2 14.0 18.0 14.0 18.0 13.6 17.8 13.6 17.8 13.1 17.5 13.1 17.5 12.8 17.2 12.8 17.2 12.4 16.7 12.4 16.7 ... ... ... ... ... ... ... ... 5 6 7 26.7 26.7 26.7 ... ... ... 26.7 22.0 26.7 ... ... ... 25.8 19.8 25.8 ... ... ... 24.5 18.3 24.5 ... ... ... 23.3 17.3 23.3 ... ... ... 22.2 16.4 22.2 21.7 16.1 21.7 21.3 15.8 21.3 20.9 15.5 20.9 20.5 15.2 20.5 ... ... ... ... ... ... ... ... ... 8 9 10 11 26.7 26.7 26.7 26.7 ... ... ... ... 22.0 26.7 22.0 26.7 ... ... ... ... 19.8 25.8 19.8 25.8 ... ... ... ... 18.3 24.5 18.3 24.5 ... ... ... ... 17.3 23.3 17.3 23.3 ... ... ... ... 16.4 22.2 16.4 22.2 16.1 21.7 16.1 21.7 15.8 21.3 15.8 21.3 15.5 20.9 15.5 20.9 15.2 20.5 15.2 20.5 ... ... ... ... ... ... ... ... ... ... ... ... 12 13 14 15 22.7 22.7 26.7 26.7 ... ... ... ... 18.7 22.7 22.0 26.7 ... ... ... ... 16.8 21.9 19.8 25.8 ... ... ... ... 15.6 20.8 18.3 24.5 ... ... ... ... 14.7 19.8 17.3 23.3 ... ... ... ... 13.9 18.9 16.4 22.2 13.7 18.4 16.1 21.7 13.4 18.1 15.8 21.3 13.2 17.8 15.5 20.9 12.9 17.4 15.2 20.5 ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 26.7 26.7 22.7 22.7 ... ... ... ... 22.0 26.7 18.7 22.7 ... ... ... ... 19.8 25.8 16.8 21.9 ... ... ... ... 18.3 24.5 15.6 20.8 ... ... ... ... 17.3 23.3 14.7 19.8 ... ... ... ... 16.4 22.2 13.9 18.9 16.1 21.7 13.7 18.4 15.8 21.3 13.4 18.1 15.5 20.9 13.2 17.8 15.2 20.5 12.9 17.4 ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 25.7 25.7 25.7 ... ... ... 23.5 25.7 25.7 ... ... ... 21.6 25.0 25.0 ... ... ... 19.9 24.2 24.2 ... ... ... 18.6 23.7 23.7 ... ... ... 17.7 23.5 23.5 17.3 23.4 23.4 17.0 23.0 23.0 16.8 22.7 22.7 16.6 22.4 22.4 16.5 22.3 22.3 16.4 22.2 22.2 16.3 22.1 22.1 23 24 25 26 27 28 25.7 25.7 25.7 25.7 25.7 25.7 ... ... ... ... ... ... 23.5 25.7 23.5 25.7 23.5 25.7 ... ... ... ... ... ... 21.6 25.0 21.6 25.0 21.6 25.0 ... ... ... ... ... ... 19.9 24.2 19.9 24.2 19.9 24.2 ... ... ... ... ... ... 18.6 23.7 18.6 23.7 18.6 23.7 ... ... ... ... ... ... 17.7 23.5 17.7 23.5 17.7 23.5 17.3 23.4 17.3 23.4 17.3 23.4 17.0 23.0 17.0 23.0 17.0 23.0 16.8 22.7 16.8 22.7 16.8 22.7 16.6 22.4 16.6 22.4 16.6 22.4 16.5 22.3 16.5 22.3 16.5 22.3 16.4 22.2 16.4 22.2 16.4 22.2 16.3 22.1 16.3 22.1 16.3 22.1 29 30 31 32 33 34 21.8 21.8 21.8 21.8 25.7 25.7 ... ... ... ... ... ... 20.0 21.8 20.0 21.8 23.5 25.7 ... ... ... ... ... ... 18.4 21.3 18.4 21.3 21.6 25.0 ... ... ... ... ... ... 16.9 20.6 16.9 20.6 19.9 24.2 ... ... ... ... ... ... 15.8 20.1 15.8 20.1 18.6 23.7 ... ... ... ... ... ... 15.0 20.0 15.0 20.0 17.7 23.5 14.7 19.9 14.7 19.9 17.3 23.4 14.5 19.6 14.5 19.6 17.0 23.0 14.3 19.3 14.3 19.3 16.8 22.7 14.1 19.0 14.1 19.0 16.6 22.4 14.0 19.0 14.0 19.0 16.5 22.3 13.9 18.9 13.9 18.9 16.4 22.2 13.9 18.8 13.9 18.8 16.3 22.1 35 36 37 38 15.9 15.9 18.7 18.7 ... ... ... ... 14.7 15.9 17.3 18.7 ... ... ... ... 13.9 15.9 16.3 18.7 ... ... ... ... 13.1 15.9 15.4 18.7 ... ... ... ... 12.3 15.9 14.5 18.7 ... ... ... ... 11.7 15.8 13.8 18.6 11.4 15.4 13.5 18.2 11.2 15.1 13.2 17.8 11.0 14.9 13.0 17.5 10.8 14.6 12.7 17.2 ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 43 44 18.7 18.7 18.7 18.7 15.9 15.9 ... ... ... ... ... ... 17.3 18.7 17.3 18.7 14.7 15.9 ... ... ... ... ... ... 16.3 18.7 16.3 18.7 13.9 15.9 ... ... ... ... ... ... 15.4 18.7 15.4 18.7 13.1 15.9 ... ... ... ... ... ... 14.5 18.7 14.5 18.7 12.3 15.9 ... ... ... ... ... ... 13.8 18.6 13.8 18.6 11.7 15.8 13.5 18.2 13.5 18.2 11.4 15.4 13.2 17.8 13.2 17.8 11.2 15.1 13.0 17.5 13.0 17.5 11.0 14.9 12.7 17.2 12.7 17.2 10.8 14.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 232 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 8 9 10 11 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 12 13 14 15 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 16.3 22.0 22.0 16.3 21.9 21.9 16.2 17.9 17.9 14.2 14.2 14.2 12.3 12.3 12.3 9.4 9.4 9.4 7.6 7.6 7.6 6.2 6.2 6.2 5.0 5.0 5.0 4.0 4.0 4.0 3.2 3.2 3.2 2.6 2.6 2.6 2.0 2.0 2.0 1.4 1.4 1.4 ... ... ... ... ... ... ... ... ... 23 24 25 26 27 28 16.3 22.0 16.3 22.0 16.3 22.0 16.3 21.9 16.3 21.9 16.3 21.9 16.2 17.9 16.2 17.9 16.2 17.9 14.2 14.2 14.2 14.2 14.2 14.2 12.3 12.3 12.3 12.3 12.3 12.3 9.4 9.4 9.4 9.4 9.4 9.4 7.6 7.6 7.6 7.6 7.6 7.6 6.2 6.2 6.2 6.2 6.2 6.2 5.0 5.0 5.0 5.0 5.0 5.0 4.0 4.0 4.0 4.0 4.0 4.0 3.2 3.2 3.2 3.2 3.2 3.2 2.6 2.6 2.6 2.6 2.6 2.6 2.0 2.0 2.0 2.0 2.0 2.0 1.4 1.4 1.4 1.4 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 33 34 13.9 18.7 13.9 18.7 16.3 22.0 13.9 18.6 13.9 18.6 16.3 21.9 13.8 15.2 13.8 15.2 16.2 17.9 12.1 12.1 12.1 12.1 14.2 14.2 10.5 10.5 10.5 10.5 12.3 12.3 8.0 8.0 8.0 8.0 9.4 9.4 6.5 6.5 6.5 6.5 7.6 7.6 5.3 5.3 5.3 5.3 6.2 6.2 4.3 4.3 4.3 4.3 5.0 5.0 3.4 3.4 3.4 3.4 4.0 4.0 2.7 2.7 2.7 2.7 3.2 3.2 2.2 2.2 2.2 2.2 2.6 2.6 1.7 1.7 1.7 1.7 2.0 2.0 1.2 1.2 1.2 1.2 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 38 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 42 43 44 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 233 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 35Ni–19Cr–11/4Si 35Ni–19Cr–11/4Si 35Ni–19Cr–11/4Si 35Ni–19Cr–11/4Si Bar Bar Bar Bar SB–511 SB–511 SB–511 SB–511 ... ... ... ... N08330 N08330 N08330 N08330 ... ... ... ... 5 6 7 8 35Ni–19Cr–11/4Si 35Ni–19Cr–11/4Si 35Ni–19Cr–11/4Si 35Ni–19Cr–11/4Si Pipe Pipe Plate Plate SB–535 SB–535 SB–536 SB–536 ... ... ... ... N08330 N08330 N08330 N08330 ... ... ... ... 9 10 11 35Ni–19Cr–11/4Si 35Ni–19Cr–11/4Si 35Ni–19Cr–11/4Si Smls. & wld. fittings Smls. & wld. pipe Smls. & wld. pipe SB–366 SB–535 SB–535 ... ... ... N08330 N08330 N08330 Annealed Annealed Annealed 12 13 14 15 35Ni–19Cr–11/4Si 35Ni–19Cr–11/4Si 35Ni–19Cr–11/4Si 35Ni–19Cr–11/4Si Plate, sheet, strip Plate, sheet, strip Wld. pipe Wld. pipe SB–536 SB–536 SB–710 SB–710 ... ... ... ... N08330 N08330 N08330 N08330 Annealed Annealed Annealed Annealed 16 17 18 19 20 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N Smls. & wld. fittings Forgings Forgings Forgings Forgings SB–366 SB–462 SB–462 SB–564 SB–564 ... ... ... ... ... N08367 N08367 N08367 N08367 N08367 Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. 21 22 23 24 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N Wld. Wld. Wld. Wld. SB–675 SB–675 SB–676 SB–676 ... ... ... ... N08367 N08367 N08367 N08367 Solution Solution Solution Solution ann. ann. ann. ann. 25 26 27 28 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N Plate, sheet, strip Plate, sheet, strip Smls. pipe & tube Smls. pipe & tube SB–688 SB–688 SB–690 SB–690 ... ... ... ... N08367 N08367 N08367 N08367 Solution Solution Solution Solution ann. ann. ann. ann. 29 30 31 32 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N Bar, rod, wire Bar, rod, wire Wld. pipe Wld. pipe SB–691 SB–691 SB–804 SB–804 ... ... ... ... N08367 N08367 N08367 N08367 Solution Solution Solution Solution ann. ann. ann. ann. 33 34 35 36 37 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N Smls. & wld. fittings Wld. pipe Wld. pipe Wld. tube Wld. tube SB–366 SB–675 SB–675 SB–676 SB–676 ... ... ... ... ... N08367 N08367 N08367 N08367 N08367 Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. 38 39 40 41 42 43 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N 46Fe–24Ni–21Cr–6Mo–Cu–N Plate, sheet, strip Plate, sheet, strip Smls. pipe & tube Smls. pipe & tube Wld. pipe Wld. pipe SB–688 SB–688 SB–690 SB–690 SB–804 SB–804 ... ... ... ... ... ... N08367 N08367 N08367 N08367 N08367 N08367 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 44 46Fe–24Ni–21Cr–6Mo–Cu–N Castings SA–351 CN3MN J94651 Solution ann. pipe pipe tube tube 234 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... ... 46 46 46 46 70 70 70 70 30 30 30 30 1500 1500 NP NP NP NP NP NP NP NP 1650 1650 NP NP 650 650 NFN–13 NFN–13 NFN–13 NFN–13 G2, G2, G4, G4, H2, G5, H1, G5, T14 H2, T12 T14 H1, T12 5 6 7 8 ... ... ... ... 46 46 46 46 70 70 70 70 30 30 30 30 1500 1500 1500 1500 NP NP NP NP NP NP NP NP NP NP NP NP NFN–13 NFN–13 NFN–13 NFN–13 G2, G2, G2, G2, H2, G5, H2, G5, T14 H2, T12 T14 H2, T12 9 10 11 ... ... ... 46 46 46 70 70 70 30 30 30 NP NP NP NP NP NP 1650 1500 1500 650 650 650 NFN–13 NFN–13 NFN–13 G4, G5, T12, W12 H1, T14, W12 G5, H1, T12, W12 12 13 14 15 ... ... ... ... 46 46 46 46 70 70 70 70 30 30 30 30 NP NP NP NP NP NP NP NP 1650 1650 1650 1650 650 650 650 650 NFN–13 NFN–13 NFN–13 NFN–13 G4, G4, G4, G4, 16 17 18 19 20 >3/16 ... ... ... ... 45 45 45 45 45 95 95 95 95 95 45 45 45 45 45 NP NP NP NP NP 800 800 800 800 800 800 800 800 800 800 NP 650 650 650 650 NFN–12 NFN–12 NFN–12 NFN–12 NFN–12 G5, W5, W12 ... G5 ... G5 21 22 23 24 >3/16 >3/16 >3/16 >3/16 45 45 45 45 95 95 95 95 45 45 45 45 NP NP NP NP 800 800 800 800 800 800 800 800 650 650 650 650 NFN–12 NFN–12 NFN–12 NFN–12 G14 G5, G14 G14 G5, G14 25 26 27 28 >3/16 >3/16 >3/16 >3/16 45 45 45 45 95 95 95 95 45 45 45 45 NP NP NP NP 800 800 800 800 800 800 800 800 650 650 650 650 NFN–12 NFN–12 NFN–12 NFN–12 ... G5 ... G5 29 30 31 32 ... ... >3/16 >3/16 45 45 45 45 95 95 95 95 45 45 45 45 NP NP NP NP 800 800 800 800 800 800 800 800 650 650 650 650 NFN–12 NFN–12 NFN–12 NFN–12 ... G5 G14 G5, G14 33 34 35 36 37 ≤3/16 ≤3/16 ≤3/16 ≤3/16 ≤3/16 45 45 45 45 45 100 100 100 100 100 45 45 45 45 45 NP NP NP NP NP NP 800 800 800 800 800 800 800 800 800 NP 650 650 650 650 NFN–12 NFN–12 NFN–12 NFN–12 NFN–12 G5, W12 G14 G5, G14 G14 G5, G14 38 39 40 41 42 43 ≤3/16 ≤3/16 ≤3/16 ≤3/16 ≤3/16 ≤3/16 45 45 45 45 45 45 100 100 100 100 100 100 45 45 45 45 45 45 NP NP NP NP NP NP 800 800 800 800 800 800 800 800 800 800 800 800 650 650 650 650 650 650 NFN–12 NFN–12 NFN–12 NFN–12 NFN–12 NFN–12 ... G5 ... G5 G14 G5, G14 44 ... 45 80 38 NP 800 800 650 NFN–12 G15 235 H1, T14 G5, H1, T12 G14, H1, T14 G5, G14, H1, T12 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 20.0 20.0 20.0 20.0 ... ... ... ... 17.7 20.0 17.7 20.0 ... ... ... ... 16.4 20.0 16.4 20.0 ... ... ... ... 15.5 19.6 15.5 19.6 ... ... ... ... 14.7 19.4 14.7 19.4 ... ... ... ... 14.0 18.9 14.0 18.9 13.7 18.5 13.7 18.5 13.4 18.1 13.4 18.1 13.1 17.7 13.1 17.7 12.9 17.4 12.9 17.4 12.6 17.0 12.6 17.0 12.4 16.7 12.4 16.7 12.1 16.1 12.1 16.1 5 6 7 8 20.0 20.0 20.0 20.0 ... ... ... ... 17.7 20.0 17.7 20.0 ... ... ... ... 16.4 20.0 16.4 20.0 ... ... ... ... 15.5 19.6 15.5 19.6 ... ... ... ... 14.7 19.4 14.7 19.4 ... ... ... ... 14.0 18.9 14.0 18.9 13.7 18.5 13.7 18.5 13.4 18.1 13.4 18.1 13.1 17.7 13.1 17.7 12.9 17.4 12.9 17.4 12.6 17.0 12.6 17.0 12.4 16.7 12.4 16.7 12.1 16.1 12.1 16.1 9 10 11 20.0 20.0 20.0 ... ... ... 20.0 17.7 20.0 ... ... ... 20.0 16.4 20.0 ... ... ... 19.6 15.5 19.6 ... ... ... 19.4 14.7 19.4 ... ... ... 18.9 14.0 18.9 18.5 13.7 18.5 18.1 13.4 18.1 17.7 13.1 17.7 17.4 12.9 17.4 17.0 12.6 17.0 16.7 12.4 16.7 16.1 12.1 16.1 12 13 14 15 20.0 20.0 17.0 17.0 ... ... ... ... 17.7 20.0 15.0 17.0 ... ... ... ... 16.4 20.0 14.0 17.0 ... ... ... ... 15.5 19.6 13.2 16.7 ... ... ... ... 14.7 19.4 12.5 16.5 ... ... ... ... 14.0 18.9 11.9 16.1 13.7 18.5 11.7 15.7 13.4 18.1 11.4 15.4 13.1 17.7 11.2 15.1 12.9 17.4 10.9 14.8 12.6 17.0 10.7 14.5 12.4 16.7 10.5 14.2 12.1 16.1 10.3 13.7 16 17 18 19 20 27.1 27.1 27.1 27.1 27.1 ... ... ... ... ... 26.2 26.2 27.1 26.2 27.1 ... ... ... ... ... 23.8 23.8 25.7 23.8 25.7 ... ... ... ... ... 21.9 21.9 24.6 21.9 24.6 ... ... ... ... ... 20.5 20.5 23.8 20.5 23.8 ... ... ... ... ... 19.4 19.4 23.3 19.4 23.3 19.0 19.0 23.1 19.0 23.1 18.6 18.6 22.9 18.6 22.9 18.3 18.3 22.8 18.3 22.8 18.0 18.0 22.6 18.0 22.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 24 23.1 23.1 23.1 23.1 ... ... ... ... 22.2 23.1 22.2 23.1 ... ... ... ... 20.2 21.8 20.2 21.8 ... ... ... ... 18.7 20.9 18.7 20.9 ... ... ... ... 17.4 20.2 17.4 20.2 ... ... ... ... 16.5 19.8 16.5 19.8 16.1 19.6 16.1 19.6 15.8 19.5 15.8 19.5 15.5 19.4 15.5 19.4 15.3 19.2 15.3 19.2 ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 27.1 27.1 27.1 27.1 ... ... ... ... 26.2 27.1 26.2 27.1 ... ... ... ... 23.8 25.7 23.8 25.7 ... ... ... ... 21.9 24.6 21.9 24.6 ... ... ... ... 20.5 23.8 20.5 23.8 ... ... ... ... 19.4 23.3 19.4 23.3 19.0 23.1 19.0 23.1 18.6 22.9 18.6 22.9 18.3 22.8 18.3 22.8 18.0 22.6 18.0 22.6 ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 27.1 27.1 23.1 23.1 ... ... ... ... 26.2 27.1 22.2 23.1 ... ... ... ... 23.8 25.7 20.2 21.8 ... ... ... ... 21.9 24.6 18.7 20.9 ... ... ... ... 20.5 23.8 17.4 20.2 ... ... ... ... 19.4 23.3 16.5 19.8 19.0 23.1 16.1 19.6 18.6 22.9 15.8 19.5 18.3 22.8 15.5 19.4 18.0 22.6 15.3 19.2 ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 36 37 28.6 24.3 24.3 24.3 24.3 ... ... ... ... ... 26.2 22.2 24.3 22.2 24.3 ... ... ... ... ... 23.8 20.2 23.0 20.2 23.0 ... ... ... ... ... 21.9 18.7 22.0 18.7 22.0 ... ... ... ... ... 20.5 17.4 21.3 17.4 21.3 ... ... ... ... ... 19.4 16.5 20.8 16.5 20.8 19.0 16.1 20.7 16.1 20.7 18.6 15.8 20.5 15.8 20.5 18.3 15.5 20.4 15.5 20.4 18.0 15.3 20.2 15.3 20.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 42 43 28.6 28.6 28.6 28.6 24.3 24.3 ... ... ... ... ... ... 26.2 28.6 26.2 28.6 22.2 24.3 ... ... ... ... ... ... 23.8 27.0 23.8 27.0 20.2 23.0 ... ... ... ... ... ... 21.9 25.8 21.9 25.8 18.7 22.0 ... ... ... ... ... ... 20.5 25.0 20.5 25.0 17.4 21.3 ... ... ... ... ... ... 19.4 24.5 19.4 24.5 16.5 20.8 19.0 24.3 19.0 24.3 16.1 20.7 18.6 24.1 18.6 24.1 15.8 20.5 18.3 24.0 18.3 24.0 15.5 20.4 18.0 23.8 18.0 23.8 15.3 20.2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 44 22.9 ... 21.4 ... 18.8 ... 16.9 ... 15.7 ... 14.9 14.7 14.5 14.4 14.2 ... ... ... 236 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 11.9 12.7 11.9 12.7 10.0 10.0 10.0 10.0 7.8 7.8 7.8 7.8 6.0 6.0 6.0 6.0 4.7 4.7 4.7 4.7 3.8 3.8 3.8 3.8 3.1 3.1 3.1 3.1 2.4 2.4 2.4 2.4 1.8 1.8 1.8 1.8 1.5 1.5 1.5 1.5 1.1 1.1 1.1 1.1 ... ... 0.90 0.90 ... ... 0.68 0.68 ... ... 0.48 0.48 ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 11.9 12.7 11.9 12.7 10.0 10.0 10.0 10.0 7.8 7.8 7.8 7.8 6.0 6.0 6.0 6.0 4.7 4.7 4.7 4.7 3.8 3.8 3.8 3.8 3.1 3.1 3.1 3.1 2.4 2.4 2.4 2.4 1.8 1.8 1.8 1.8 1.5 1.5 1.5 1.5 1.1 1.1 1.1 1.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 12.7 11.9 12.7 10.0 10.0 10.0 7.8 7.8 7.8 6.0 6.0 6.0 4.7 4.7 4.7 3.8 3.8 3.8 3.1 3.1 3.1 2.4 2.4 2.4 1.8 1.8 1.8 1.5 1.5 1.5 1.1 1.1 1.1 0.90 ... ... 0.68 ... ... 0.48 ... ... ... ... ... ... ... ... ... ... ... 12 13 14 15 11.9 12.7 10.1 10.8 10.0 10.0 8.5 8.5 7.8 7.8 6.6 6.6 6.0 6.0 5.1 5.1 4.7 4.7 4.0 4.0 3.8 3.8 3.2 3.2 3.1 3.1 2.6 2.6 2.4 2.4 2.0 2.0 1.8 1.8 1.5 1.5 1.5 1.5 1.3 1.3 1.1 1.1 0.94 0.94 0.90 0.90 0.77 0.77 0.68 0.68 0.58 0.58 0.48 0.48 0.41 0.41 ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 20 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21 22 23 24 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 26 27 28 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 36 37 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 42 43 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 44 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 237 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 25Ni–47Fe–21Cr–5Mo 25Ni–47Fe–21Cr–5Mo 25Ni–47Fe–21Cr–5Mo Plate, sheet, strip Plate, sheet, strip Bar, wire SB–599 SB–599 SB–672 ... ... ... N08700 N08700 N08700 Solution ann. Solution ann. Solution ann. 4 32Ni–45Fe–20Cr–Cb Castings SA–351 CT15C ... As cast 5 6 7 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr Smls. tube Smls. tube Smls. & wld. fittings SB–163 SB–163 SB–366 ... ... ... N08800 N08800 N08800 Annealed Annealed Annealed 8 9 10 11 12 13 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr Smls. pipe & tube Smls. pipe & tube Bar Bar Plate Plate SB–407 SB–407 SB–408 SB–408 SB–409 SB–409 ... ... ... ... ... ... N08800 N08800 N08800 N08800 N08800 N08800 Annealed Annealed Annealed Annealed Annealed Annealed 14 15 16 17 18 19 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr Wld. pipe Wld. pipe Wld. tube Wld. tube Forgings Forgings SB–514 SB–514 SB–515 SB–515 SB–564 SB–564 ... ... ... ... ... ... N08800 N08800 N08800 N08800 N08800 N08800 Annealed Annealed Annealed Annealed Annealed Annealed 20 21 22 23 32Ni–44Fe–21Cr 32Ni–44Fe–21Cr 32Ni–44Fe–21Cr 32Ni–44Fe–21Cr Smls. Smls. Smls. Smls. tube tube pipe & tube pipe & tube SB–163 SB–163 SB–407 SB–407 ... ... ... ... N08801 N08801 N08801 N08801 Ann./stabilized Ann./stabilized Ann./stabilized Ann./stabilized 24 25 26 27 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr Smls. Smls. Smls. Smls. tube tube pipe & tube pipe & tube SB–163 SB–163 SB–407 SB–407 ... ... ... ... N08810 N08810 N08810 N08810 Annealed Sol. treat./ann. Annealed Hot fin./ann. 28 29 30 31 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr Bar Bar Plate Plate SB–408 SB–408 SB–409 SB–409 ... ... ... ... N08810 N08810 N08810 N08810 Annealed Sol. treat./ann. Annealed Sol. treat./ann. 32 33 34 35 36 37 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr Wld. pipe Wld. pipe Wld. tube Wld. tube Forgings Forgings SB–514 SB–514 SB–515 SB–515 SB–564 SB–564 ... ... ... ... ... ... N08810 N08810 N08810 N08810 N08810 N08810 Annealed Annealed Annealed Annealed Annealed Sol. treat./ann. 38 39 40 41 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr Smls. Smls. Smls. Smls. SB–163 SB–163 SB–407 SB–407 ... ... ... ... N08811 N08811 N08811 N08811 Annealed Annealed Annealed Annealed tube tube pipe & tube pipe & tube 238 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... 45 45 45 80 80 80 35 35 35 NP NP NP NP NP NP 650 650 650 650 650 650 NFN–8 NFN–8 NFN–8 ... G5 ... 4 ... 45 63 25 NP NP 1600 650 NFN–9 G4, G15 5 6 7 ... ... ... 45 45 45 75 75 75 30 30 30 NP NP NP 800 NP NP 1500 1500 1500 NP NP NP NFN–8 NFN–8 NFN–8 G5, T14 T15 G5, T14, W12 8 9 10 11 12 13 ... ... ... ... ... ... 45 45 45 45 45 45 75 75 75 75 75 75 30 30 30 30 30 30 1500 1500 1500 1500 1500 1500 800 NP 800 NP 800 NP 1500 1500 1500 1500 1500 1500 NP NP NP NP NP NP NFN–8 NFN–8 NFN–8 NFN–8 NFN–8 NFN–8 G5, T14 T15 G5, T14 T15 G5, T14 T15 14 15 16 17 18 19 ... ... ... ... ... ... 45 45 45 45 45 45 75 75 75 75 75 75 30 30 30 30 30 30 NP NP 1500 1500 1500 1500 NP NP NP NP 800 NP 1500 1500 1500 1500 1500 1500 NP NP NP NP NP NP NFN–8 NFN–8 NFN–8 NFN–8 NFN–8 NFN–8 G14, T15 G5, G14, T14 G5, G14, T14 G14, T15 G5, T14 T15 20 21 22 23 ... ... ... ... 45 45 45 45 65 65 65 65 25 25 25 25 1050 1050 1050 1050 NP NP NP NP 900 900 900 900 NP NP NP NP NFN–9 NFN–9 NFN–9 NFN–9 H4 G5, H4 H4 G5, H4 24 25 26 27 ... ... ... ... 45 45 45 45 65 65 65 65 25 25 25 25 NP NP 1500 1500 NP 800 NP 800 1650 1650 1800 1800 NP NP NP NP NFN–9 NFN–9 NFN–9 NFN–9 G4, G4, G4, G4, T16 G5, T15 T16 G5, T15 28 29 30 31 ... ... ... ... 45 45 45 45 65 65 65 65 25 25 25 25 1500 1500 1500 1500 NP 800 NP 800 1650 1650 1650 1650 NP NP NP NP NFN–9 NFN–9 NFN–9 NFN–9 G4, G4, G4, G4, T16 G5, T15 T16 G5, T15 32 33 34 35 36 37 ... ... ... ... ... ... 45 45 45 45 45 45 65 65 65 65 65 65 25 25 25 25 25 25 NP NP 1500 1500 1500 1500 NP NP NP NP NP 800 1650 1650 1650 1650 1650 1650 NP NP NP NP NP NP NFN–9 NFN–9 NFN–9 NFN–9 NFN–9 NFN–9 G4, G4, G4, G4, G4, G4, G14, T16 G5, G14, T15 G14, T16 G5, G14, T15 T16 G5, T15 38 39 40 41 ... ... ... ... 45 45 45 45 65 65 65 65 25 25 25 25 1500 1500 1500 1500 NP NP NP NP 1650 1650 1650 1650 NP NP NP NP NFN–9 NFN–9 NFN–9 NFN–9 G4, G4, G4, G4, T17 G5, T15 T17 G5, T15 239 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 22.9 22.9 22.9 ... ... ... 21.0 22.9 21.0 ... ... ... 19.0 22.6 19.0 ... ... ... 17.7 22.0 17.7 ... ... ... 17.1 21.5 17.1 ... ... ... 16.5 21.4 16.5 15.8 21.4 15.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 16.7 ... 15.7 ... 15.3 ... 14.9 ... 14.6 ... 14.2 13.9 13.7 13.5 13.3 13.1 12.9 12.7 5 6 7 20.0 20.0 20.0 ... ... ... 20.0 18.5 20.0 ... ... ... 20.0 17.8 20.0 ... ... ... 20.0 17.2 20.0 ... ... ... 20.0 16.8 20.0 ... ... ... 20.0 16.3 20.0 20.0 16.1 20.0 20.0 15.9 20.0 20.0 15.7 20.0 20.0 15.5 20.0 20.0 15.3 20.0 20.0 15.1 20.0 20.0 14.9 20.0 8 9 10 11 12 13 20.0 20.0 20.0 20.0 20.0 20.0 ... ... ... ... ... ... 20.0 18.5 20.0 18.5 20.0 18.5 ... ... ... ... ... ... 20.0 17.8 20.0 17.8 20.0 17.8 ... ... ... ... ... ... 20.0 17.2 20.0 17.2 20.0 17.2 ... ... ... ... ... ... 20.0 16.8 20.0 16.8 20.0 16.8 ... ... ... ... ... ... 20.0 16.3 20.0 16.3 20.0 16.3 20.0 16.1 20.0 16.1 20.0 16.1 20.0 15.9 20.0 15.9 20.0 15.9 20.0 15.7 20.0 15.7 20.0 15.7 20.0 15.5 20.0 15.5 20.0 15.5 20.0 15.3 20.0 15.3 20.0 15.3 20.0 15.1 20.0 15.1 20.0 15.1 20.0 14.9 20.0 14.9 20.0 14.9 14 15 16 17 18 19 17.0 17.0 17.0 17.0 20.0 20.0 ... ... ... ... ... ... 15.7 17.0 17.0 15.7 20.0 18.5 ... ... ... ... ... ... 15.1 17.0 17.0 15.1 20.0 17.8 ... ... ... ... ... ... 14.6 17.0 17.0 14.6 20.0 17.2 ... ... ... ... ... ... 14.2 17.0 17.0 14.2 20.0 16.8 ... ... ... ... ... ... 13.9 17.0 17.0 13.9 20.0 16.3 13.7 17.0 17.0 13.7 20.0 16.1 13.5 17.0 17.0 13.5 20.0 15.9 13.3 17.0 17.0 13.3 20.0 15.7 13.2 17.0 17.0 13.2 20.0 15.5 13.0 17.0 17.0 13.0 20.0 15.3 12.8 17.0 17.0 12.8 20.0 15.1 12.7 17.0 17.0 12.7 20.0 14.9 20 21 22 23 16.7 16.7 16.7 16.7 ... ... ... ... 15.4 16.7 15.4 16.7 ... ... ... ... 14.4 16.7 14.4 16.7 ... ... ... ... 13.6 16.7 13.6 16.7 ... ... ... ... 12.9 16.7 12.9 16.7 ... ... ... ... 12.2 16.5 12.2 16.5 11.9 16.1 11.9 16.1 11.6 15.7 11.6 15.7 11.4 15.3 11.4 15.3 11.1 15.0 11.1 15.0 10.9 14.7 10.9 14.7 10.7 14.5 10.7 14.5 10.5 14.2 10.5 14.2 24 25 26 27 16.7 16.7 16.7 16.7 ... ... ... ... 15.4 16.7 15.4 16.7 ... ... ... ... 14.4 16.7 14.4 16.7 ... ... ... ... 13.6 16.7 13.6 16.7 ... ... ... ... 12.9 16.7 12.9 16.7 ... ... ... ... 12.2 16.5 12.2 16.5 11.9 16.1 11.9 16.1 11.6 15.7 11.6 15.7 11.4 15.3 11.4 15.3 11.1 15.0 11.1 15.0 10.9 14.7 10.9 14.7 10.7 14.5 10.7 14.5 10.5 14.2 10.5 14.2 28 29 30 31 16.7 16.7 16.7 16.7 ... ... ... ... 15.4 16.7 15.4 16.7 ... ... ... ... 14.4 16.7 14.4 16.7 ... ... ... ... 13.6 16.7 13.6 16.7 ... ... ... ... 12.9 16.7 12.9 16.7 ... ... ... ... 12.2 16.5 12.2 16.5 11.9 16.1 11.9 16.1 11.6 15.7 11.6 15.7 11.4 15.3 11.4 15.3 11.1 15.0 11.1 15.0 10.9 14.7 10.9 14.7 10.7 14.5 10.7 14.5 10.5 14.2 10.5 14.2 32 33 34 35 36 37 14.2 14.2 14.2 14.2 16.7 16.7 ... ... ... ... ... ... 13.1 14.2 13.1 14.2 15.4 16.7 ... ... ... ... ... ... 12.3 14.2 12.3 14.2 14.4 16.7 ... ... ... ... ... ... 11.6 14.2 11.6 14.2 13.6 16.7 ... ... ... ... ... ... 10.9 14.2 10.9 14.2 12.9 16.7 ... ... ... ... ... ... 10.4 14.0 10.4 14.0 12.2 16.5 10.1 13.7 10.1 13.7 11.9 16.1 9.9 13.3 9.9 13.3 11.6 15.7 9.7 13.0 9.7 13.0 11.4 15.3 9.5 12.8 9.5 12.8 11.1 15.0 9.3 12.5 9.3 12.5 10.9 14.7 9.1 12.3 9.1 12.3 10.7 14.5 9.0 12.1 9.0 12.1 10.5 14.2 38 39 40 41 16.7 16.7 16.7 16.7 ... ... ... ... 15.4 16.7 15.4 16.7 ... ... ... ... 14.4 16.7 14.4 16.7 ... ... ... ... 13.6 16.7 13.6 16.7 ... ... ... ... 12.9 16.7 12.9 16.7 ... ... ... ... 12.2 16.5 12.2 16.5 11.9 16.1 11.9 16.1 11.6 15.7 11.6 15.7 11.4 15.3 11.4 15.3 11.1 15.0 11.1 15.0 10.9 14.7 10.9 14.7 10.7 14.5 10.7 14.5 10.5 14.2 10.5 14.2 240 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 11.5 10.1 8.9 7.8 6.7 5.7 4.8 4.0 3.3 2.7 2.2 1.8 1.4 ... ... ... ... 5 6 7 19.9 14.7 19.9 17.0 14.5 17.0 13.0 13.0 13.0 9.8 9.8 9.8 6.6 6.6 6.6 4.2 4.2 4.2 2.0 2.0 2.0 1.6 1.6 1.6 1.1 1.1 1.1 1.0 1.0 1.0 0.80 0.80 0.80 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 8 9 10 11 12 13 19.9 14.7 19.9 14.7 19.9 14.7 17.0 14.5 17.0 14.5 17.0 14.5 13.0 13.0 13.0 13.0 13.0 13.0 9.8 9.8 9.8 9.8 9.8 9.8 6.6 6.6 6.6 6.6 6.6 6.6 4.2 4.2 4.2 4.2 4.2 4.2 2.0 2.0 2.0 2.0 2.0 2.0 1.6 1.6 1.6 1.6 1.6 1.6 1.1 1.1 1.1 1.1 1.1 1.1 1.0 1.0 1.0 1.0 1.0 1.0 0.80 0.80 0.80 0.80 0.80 0.80 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 17 18 19 12.5 16.9 16.9 12.5 19.9 14.7 12.3 14.5 14.5 12.3 17.0 14.5 11.1 11.1 11.1 11.1 13.0 13.0 8.3 8.3 8.3 8.3 9.8 9.8 5.6 5.6 5.6 5.6 6.6 6.6 3.6 3.6 3.6 3.6 4.2 4.2 1.7 1.7 1.7 1.7 2.0 2.0 1.4 1.4 1.4 1.4 1.6 1.6 0.94 0.94 0.94 0.94 1.1 1.1 0.85 0.85 0.85 0.85 1.0 1.0 0.68 0.68 0.68 0.68 0.80 0.80 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 10.4 14.0 10.4 14.0 10.2 13.8 10.2 13.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 10.4 14.0 10.4 14.0 10.2 13.8 10.2 13.8 10.0 11.6 10.0 11.6 9.3 9.3 9.3 9.3 7.4 7.4 7.4 7.4 5.9 5.9 5.9 5.9 4.7 4.7 4.7 4.7 3.8 3.8 3.8 3.8 3.0 3.0 3.0 3.0 2.4 2.4 2.4 2.4 1.9 1.9 1.9 1.9 1.4 1.4 1.4 1.4 1.1 1.1 1.1 1.1 0.86 0.86 0.86 0.86 ... ... 0.71 0.71 ... ... 0.56 0.56 ... ... 0.44 0.44 28 29 30 31 10.4 14.0 10.4 14.0 10.2 13.8 10.2 13.8 10.0 11.6 10.0 11.6 9.3 9.3 9.3 9.3 7.4 7.4 7.4 7.4 5.9 5.9 5.9 5.9 4.7 4.7 4.7 4.7 3.8 3.8 3.8 3.8 3.0 3.0 3.0 3.0 2.4 2.4 2.4 2.4 1.9 1.9 1.9 1.9 1.4 1.4 1.4 1.4 1.1 1.1 1.1 1.1 0.86 0.86 0.86 0.86 ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 36 37 8.8 11.9 8.8 11.9 10.4 14.0 8.7 11.7 8.7 11.7 10.2 13.8 8.5 9.9 8.5 9.9 10.0 11.6 7.9 7.9 7.9 7.9 9.3 9.3 6.3 6.3 6.3 6.3 7.4 7.4 5.0 5.0 5.0 5.0 5.9 5.9 4.0 4.0 4.0 4.0 4.7 4.7 3.2 3.2 3.2 3.2 3.8 3.8 2.6 2.6 2.6 2.6 3.0 3.0 2.0 2.0 2.0 2.0 2.4 2.4 1.6 1.6 1.6 1.6 1.9 1.9 1.2 1.2 1.2 1.2 1.4 1.4 0.94 0.94 0.94 0.94 1.1 1.1 0.73 0.73 0.73 0.73 0.86 0.86 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 10.4 14.0 10.4 14.0 10.2 13.8 10.2 13.8 10.0 12.9 10.0 12.9 9.8 10.4 9.8 10.4 8.3 8.3 8.3 8.3 6.7 6.7 6.7 6.7 5.4 5.4 5.4 5.4 4.3 4.3 4.3 4.3 3.4 3.4 3.4 3.4 2.7 2.7 2.7 2.7 2.2 2.2 2.2 2.2 1.6 1.6 1.6 1.6 1.2 1.2 1.2 1.2 0.91 0.91 0.91 0.91 ... ... ... ... ... ... ... ... ... ... ... ... 241 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr Bar Bar Plate Plate SB–408 SB–408 SB–409 SB–409 ... ... ... ... N08811 N08811 N08811 N08811 Annealed Annealed Annealed Annealed 5 6 7 8 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr 33Ni–42Fe–21Cr Wld. tube Wld. tube Forgings Forgings SB–515 SB–515 SB–564 SB–564 ... ... ... ... N08811 N08811 N08811 N08811 Annealed Annealed Annealed Annealed 9 10 11 42Ni–21.5Cr–3Mo–2.3Cu 42Ni–21.5Cr–3Mo–2.3Cu 42Ni–21.5Cr–3Mo–2.3Cu Smls. tube Smls. tube Smls. & wld. fittings SB–163 SB–163 SB–366 ... ... ... N08825 N08825 N08825 Annealed Annealed Annealed 12 13 14 15 16 17 42Ni–21.5Cr–3Mo–2.3Cu 42Ni–21.5Cr–3Mo–2.3Cu 42Ni–21.5Cr–3Mo–2.3Cu 42Ni–21.5Cr–3Mo–2.3Cu 42Ni–21.5Cr–3Mo–2.3Cu 42Ni–21.5Cr–3Mo–2.3Cu Smls. pipe & tube Smls. pipe & tube Plate Plate Bar, rod Bar, rod SB–423 SB–423 SB–424 SB–424 SB–425 SB–425 ... ... ... ... ... ... N08825 N08825 N08825 N08825 N08825 N08825 Cold worked/ann. Cold worked/ann. Annealed Annealed Annealed Annealed 18 19 20 21 22 23 42Ni–21.5Cr–3Mo–2.3Cu 42Ni–21.5Cr–3Mo–2.3Cu 42Ni–21.5Cr–3Mo–2.3Cu 42Ni–21.5Cr–3Mo–2.3Cu 42Ni–21.5Cr–3Mo–2.3Cu 42Ni–21.5Cr–3Mo–2.3Cu Forgings Forgings Wld. tube Wld. tube Wld. pipe Wld. pipe SB–564 SB–564 SB–704 SB–704 SB–705 SB–705 ... ... ... ... ... ... N08825 N08825 N08825 N08825 N08825 N08825 Annealed Annealed Annealed Annealed Annealed Annealed ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 24 25 26 27 28 44Fe–25Ni–21Cr–Mo 44Fe–25Ni–21Cr–Mo 44Fe–25Ni–21Cr–Mo 44Fe–25Ni–21Cr–Mo 44Fe–25Ni–21Cr–Mo Forgings Plate, sheet, strip Smls. pipe Wld. pipe Fittings SA–182 SA–240 SA–312 SA–312 SA–403 ... ... ... ... ... N08904 N08904 N08904 N08904 N08904 Annealed Annealed Annealed Annealed Annealed ð15Þ 29 30 31 44Fe–25Ni–21Cr–Mo 44Fe–25Ni–21Cr–Mo 44Fe–25Ni–21Cr–Mo Bar, wire Wld. tube Smls. tube SB–649 SB–674 SB–677 ... ... ... N08904 N08904 N08904 Annealed Annealed Annealed 32 33 34 35 25Ni–20Cr–6Mo–Cu–N 25Ni–20Cr–6Mo–Cu–N 25Ni–20Cr–6Mo–Cu–N 25Ni–20Cr–6Mo–Cu–N Plate, sheet, strip Plate, sheet, strip Bar, wire Bar, wire SB–625 SB–625 SB–649 SB–649 ... ... ... ... N08925 N08925 N08925 N08925 Annealed Annealed Annealed Annealed 36 37 38 39 40 41 25Ni–20Cr–6Mo–Cu–N 25Ni–20Cr–6Mo–Cu–N 25Ni–20Cr–6Mo–Cu–N 25Ni–20Cr–6Mo–Cu–N 25Ni–20Cr–6Mo–Cu–N 25Ni–20Cr–6Mo–Cu–N Wld. pipe Wld. pipe Wld. tube Wld. tube Smls. pipe & tube Smls. pipe & tube SB–673 SB–673 SB–674 SB–674 SB–677 SB–677 ... ... ... ... ... ... N08925 N08925 N08925 N08925 N08925 N08925 Annealed Annealed Annealed Annealed Annealed Annealed 42 43 44 62Ni–28Mo–5Fe 62Ni–28Mo–5Fe 62Ni–28Mo–5Fe Plate Plate Smls. & wld. fittings SB–333 SB–333 SB–366 ... ... ... N10001 N10001 N10001 Annealed Annealed Annealed 242 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... ... 45 45 45 45 65 65 65 65 25 25 25 25 1500 1500 1500 1500 NP NP NP NP 1650 1650 1650 1650 NP NP NP NP NFN–9 NFN–9 NFN–9 NFN–9 G4, G4, G4, G4, T17 G5, T15 T17 G5, T15 5 6 7 8 ... ... ... ... 45 45 45 45 65 65 65 65 25 25 25 25 1500 1500 1500 1500 NP NP NP NP 1650 1650 1650 1650 NP NP NP NP NFN–9 NFN–9 NFN–9 NFN–9 G4, G4, G4, G4, G14, T17 G5, G14, T16 T17 G5, T15 9 10 11 ... ... ... 45 45 45 85 85 85 35 35 35 NP NP NP 800 (Cl. 3 only) 800 (Cl. 3 only) NP 1000 1000 1000 650 650 650 NFN–7 NFN–7 NFN–7 ... G5 G5, W12 12 13 14 15 16 17 ... ... ... ... ... ... 45 45 45 45 45 45 85 85 85 85 85 85 35 35 35 35 35 35 1000 1000 1000 1000 1000 1000 800 800 800 800 800 800 1000 1000 1000 1000 1000 1000 650 650 650 650 650 650 NFN–7 NFN–7 NFN–7 NFN–7 NFN–7 NFN–7 ... G5 ... G5 ... G5 18 19 20 21 22 23 ... ... ... ... ... ... 45 45 45 45 45 45 85 85 85 85 85 85 35 35 35 35 35 35 NP NP NP NP NP NP NP NP 800 NP NP NP 1000 1000 1000 1000 1000 1000 NP NP 650 650 650 650 NFN–7 NFN–7 NFN–7 NFN–7 NFN–7 NFN–7 ... G5 G14 G5, G14 G14 G5, G14 24 25 26 27 28 ... ... ... ... ... 45 45 45 45 45 71 71 71 71 71 31 31 31 31 31 NP NP NP NP NP 700 700 700 700 700 700 700 700 700 700 650 650 650 650 650 NFN–9 NFN–9 NFN–9 NFN–9 NFN–9 W12 ... ... G14 W12 29 30 31 ... ... ... 45 45 45 71 71 71 31 31 31 NP NP NP 700 700 700 700 700 700 650 650 650 NFN–9 NFN–9 NFN–9 ... G14 ... 32 33 34 35 ... ... ... ... 45 45 45 45 87 87 87 87 43 43 43 43 NP NP NP NP NP NP NP NP 800 800 800 800 650 650 650 650 NFN–12 NFN–12 NFN–12 NFN–12 ... G5 ... G5 36 37 38 39 40 41 ... ... ... ... ... ... 45 45 45 45 45 45 87 87 87 87 87 87 43 43 43 43 43 43 NP NP NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 800 650 650 650 650 650 650 NFN–12 NFN–12 NFN–12 NFN–12 NFN–12 NFN–12 G14 G5, G14 G14 G5, G14 ... G5 42 43 44 ... ... ... 44 44 44 100 100 100 45 45 45 NP NP NP 800 (Cl. 3 only) 800 (Cl. 3 only) NP 800 800 800 650 650 650 NFN–5 NFN–5 NFN–5 ... G5 G5, W12 (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 only) only) only) only) only) only) 243 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 16.7 16.7 16.7 16.7 ... ... ... ... 15.4 16.7 15.4 16.7 ... ... ... ... 14.4 16.7 14.4 16.7 ... ... ... ... 13.6 16.7 13.6 16.7 ... ... ... ... 12.9 16.7 12.9 16.7 ... ... ... ... 12.2 16.5 12.2 16.5 11.9 16.1 11.9 16.1 11.6 15.7 11.6 15.7 11.4 15.3 11.4 15.3 11.1 15.0 11.1 15.0 10.9 14.7 10.9 14.7 10.7 14.5 10.7 14.5 10.5 14.2 10.5 14.2 5 6 7 8 14.2 14.2 16.7 16.7 ... ... ... ... 13.1 14.2 15.4 16.7 ... ... ... ... 12.3 14.2 14.4 16.7 ... ... ... ... 11.6 14.2 13.6 16.7 ... ... ... ... 10.9 14.2 12.9 16.7 ... ... ... ... 10.4 14.0 12.2 16.5 10.1 13.7 11.9 16.1 9.9 13.3 11.6 15.7 9.7 13.0 11.4 15.3 9.5 12.8 11.1 15.0 9.3 12.5 10.9 14.7 9.1 12.3 10.7 14.5 9.0 12.1 10.5 14.2 9 10 11 23.3 23.3 23.3 ... ... ... 21.4 23.3 23.3 ... ... ... 20.3 23.3 23.3 ... ... ... 19.4 23.3 23.3 ... ... ... 18.5 23.3 23.3 ... ... ... 17.8 23.3 23.3 17.5 23.3 23.3 17.3 23.3 23.3 17.2 23.2 23.2 17.0 23.0 23.0 17.0 22.9 22.9 16.9 22.8 22.8 16.8 22.6 22.6 12 13 14 15 16 17 23.3 23.3 23.3 23.3 23.3 23.3 ... ... ... ... ... ... 21.4 23.3 21.4 23.3 21.4 23.3 ... ... ... ... ... ... 20.3 23.3 20.3 23.3 20.3 23.3 ... ... ... ... ... ... 19.4 23.3 19.4 23.3 19.4 23.3 ... ... ... ... ... ... 18.5 23.3 18.5 23.3 18.5 23.3 ... ... ... ... ... ... 17.8 23.3 17.8 23.3 17.8 23.3 17.5 23.3 17.5 23.3 17.5 23.3 17.3 23.3 17.3 23.3 17.3 23.3 17.2 23.2 17.2 23.2 17.2 23.2 17.0 23.0 17.0 23.0 17.0 23.0 17.0 22.9 17.0 22.9 17.0 22.9 16.9 22.8 16.9 22.8 16.9 22.8 16.8 22.6 16.8 22.6 16.8 22.6 18 19 20 21 22 23 23.3 23.3 19.8 19.8 19.8 19.8 ... ... ... ... ... ... 21.4 23.3 18.2 19.8 18.2 19.8 ... ... ... ... ... ... 20.3 23.3 17.3 19.8 17.3 19.8 ... ... ... ... ... ... 19.4 23.3 16.5 19.8 16.5 19.8 ... ... ... ... ... ... 18.5 23.3 15.8 19.8 15.8 19.8 ... ... ... ... ... ... 17.8 23.3 15.2 19.8 15.2 19.8 17.5 23.3 14.9 19.8 14.9 19.8 17.3 23.3 14.7 19.8 14.7 19.8 17.2 23.2 14.6 19.7 14.6 19.7 17.0 23.0 14.5 19.6 14.5 19.6 17.0 22.9 14.4 19.5 14.4 19.5 16.9 22.8 14.3 19.4 14.3 19.4 16.8 22.6 14.2 19.2 14.2 19.2 24 25 26 27 28 20.3 20.3 20.3 17.2 20.3 ... ... ... ... ... 16.7 16.7 16.7 14.2 16.7 ... ... ... ... ... 15.1 15.1 15.1 12.9 15.1 ... ... ... ... ... 13.8 13.8 13.8 11.8 13.8 ... ... ... ... ... 12.7 12.7 12.7 10.8 12.7 ... ... ... ... ... 11.9 11.9 11.9 10.1 11.9 11.6 11.6 11.6 9.9 11.6 11.4 11.4 11.4 9.7 11.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 20.3 17.2 20.3 ... ... ... 16.7 14.2 16.7 ... ... ... 15.1 12.9 15.1 ... ... ... 13.8 11.8 13.8 ... ... ... 12.7 10.8 12.7 ... ... ... 11.9 10.1 11.9 11.6 9.9 11.6 11.4 9.7 11.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 32 33 34 35 24.9 24.9 24.9 24.9 ... ... ... ... 23.2 24.9 23.2 24.9 ... ... ... ... 21.3 23.9 21.3 23.9 ... ... ... ... 19.8 23.0 19.8 23.0 ... ... ... ... 18.3 22.1 18.3 22.1 ... ... ... ... 17.3 21.4 17.3 21.4 17.0 21.1 17.0 21.1 16.9 20.8 16.9 20.8 16.9 20.4 16.9 20.4 16.9 20.1 16.9 20.1 ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 40 41 21.1 21.1 21.1 21.1 24.9 24.9 ... ... ... ... ... ... 19.7 21.1 19.7 21.1 23.2 24.9 ... ... ... ... ... ... 18.1 20.4 18.1 20.4 21.3 23.9 ... ... ... ... ... ... 16.8 19.5 16.8 19.5 19.8 23.0 ... ... ... ... ... ... 15.6 18.8 15.6 18.8 18.3 22.1 ... ... ... ... ... ... 14.7 18.2 14.7 18.2 17.3 21.4 14.4 17.9 14.4 17.9 17.0 21.1 14.4 17.7 14.4 17.7 16.9 20.8 14.4 17.4 14.4 17.4 16.9 20.4 14.4 17.0 14.4 17.0 16.9 20.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 42 43 44 28.6 28.6 28.6 ... ... ... 27.2 28.6 28.6 ... ... ... 25.7 28.6 28.6 ... ... ... 24.6 28.1 28.1 ... ... ... 23.7 27.8 27.8 ... ... ... 23.0 27.7 27.7 22.8 27.5 ... 22.5 27.4 27.4 22.3 27.3 ... 22.1 27.2 27.2 ... ... ... ... ... ... ... ... ... 244 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 10.4 14.0 10.4 14.0 10.2 13.8 10.2 13.8 10.0 12.9 10.0 12.9 9.8 10.4 9.8 10.4 8.3 8.3 8.3 8.3 6.7 6.7 6.7 6.7 5.4 5.4 5.4 5.4 4.3 4.3 4.3 4.3 3.4 3.4 3.4 3.4 2.7 2.7 2.7 2.7 2.2 2.2 2.2 2.2 1.6 1.6 1.6 1.6 1.2 1.2 1.2 1.2 0.91 0.91 0.91 0.91 ... ... ... ... ... ... ... ... ... ... ... ... 5 6 7 8 8.8 11.9 10.4 14.0 8.7 11.7 10.2 13.8 8.5 11.5 10.0 12.9 8.3 8.8 9.8 10.4 7.1 7.1 8.3 8.3 5.7 5.7 6.7 6.7 4.6 4.6 5.4 5.4 3.7 3.7 4.3 4.3 2.9 2.9 3.4 3.4 2.3 2.3 2.7 2.7 1.9 1.9 2.2 2.2 1.3 1.3 1.6 1.6 1.0 1.0 1.2 1.2 0.77 0.77 0.91 0.91 ... ... ... ... ... ... ... ... ... ... ... ... 9 10 11 16.5 22.3 22.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 12 13 14 15 16 17 16.5 22.3 16.5 22.3 16.5 22.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 18 19 20 21 22 23 16.5 22.3 14.0 18.9 14.0 18.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 28 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ ð15Þ ð15Þ ð15Þ ð15Þ 29 30 31 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ð15Þ 32 33 34 35 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 36 37 38 39 40 41 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 42 43 44 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 245 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 62Ni–28Mo–5Fe 62Ni–28Mo–5Fe 62Ni–28Mo–5Fe 62Ni–28Mo–5Fe 62Ni–28Mo–5Fe 62Ni–28Mo–5Fe Wld. pipe Wld. pipe Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–619 SB–619 SB–622 SB–622 SB–626 SB–626 ... ... ... ... ... ... N10001 N10001 N10001 N10001 N10001 N10001 Solution Solution Solution Solution Solution Solution 7 8 9 10 11 12 62Ni–28Mo–5Fe 62Ni–28Mo–5Fe 62Ni–28Mo–5Fe 62Ni–28Mo–5Fe 62Ni–28Mo–5Fe 62Ni–28Mo–5Fe Rod Rod Rod Rod Sheet, strip Sheet, strip SB–335 SB–335 SB–335 SB–335 SB–333 SB–333 ... ... ... ... ... ... N10001 N10001 N10001 N10001 N10001 N10001 Annealed Annealed Annealed Annealed Annealed Annealed 13 14 15 70Ni–16Mo–7Cr–5Fe 70Ni–16Mo–7Cr–5Fe 70Ni–16Mo–7Cr–5Fe Smls. & wld. fittings Plate, sheet, strip Rod SB–366 SB–434 SB–573 ... ... ... N10003 N10003 N10003 Annealed Annealed Annealed 16 17 18 62Ni–25Mo–8Cr–2Fe 62Ni–25Mo–8Cr–2Fe 62Ni–25Mo–8Cr–2Fe Smls. & wld. fittings Plate, sheet, strip Plate, sheet, strip SB–366 SB–434 SB–434 ... ... ... N10242 N10242 N10242 Annealed Annealed Annealed 19 20 21 22 62Ni–25Mo–8Cr–2Fe 62Ni–25Mo–8Cr–2Fe 62Ni–25Mo–8Cr–2Fe 62Ni–25Mo–8Cr–2Fe Forgings Forgings Rod Rod SB–564 SB–564 SB–573 SB–573 ... ... ... ... N10242 N10242 N10242 N10242 Annealed Annealed Annealed Annealed 23 24 25 26 27 28 62Ni–25Mo–8Cr–2Fe 62Ni–25Mo–8Cr–2Fe 62Ni–25Mo–8Cr–2Fe 62Ni–25Mo–8Cr–2Fe 62Ni–25Mo–8Cr–2Fe 62Ni–25Mo–8Cr–2Fe Wld. pipe Wld. pipe Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–619 SB–619 SB–622 SB–622 SB–626 SB–626 ... ... ... ... ... ... N10242 N10242 N10242 N10242 N10242 N10242 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 29 30 31 32 33 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr Smls. & wld. fittings Forgings Forgings Forgings Forgings SB–366 SB–462 SB–462 SB–564 SB–564 ... ... ... ... ... N10276 N10276 N10276 N10276 N10276 Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. 34 35 36 37 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr Rod Rod Plate, sheet, strip Plate, sheet, strip SB–574 SB–574 SB–575 SB–575 ... ... ... ... N10276 N10276 N10276 N10276 Solution Solution Solution Solution ann. ann. ann. ann. 38 39 40 41 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr Wld. Wld. Wld. Wld. SB–619 SB–619 SB–619 SB–619 ... ... ... ... N10276 N10276 N10276 N10276 Solution Solution Solution Solution ann. ann. ann. ann. pipe pipe pipe pipe 246 ann. ann. ann. ann. ann. ann. This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. NP NP NP NP NP NP 800 800 800 800 800 800 650 650 650 650 650 650 NFN–5 NFN–5 NFN–5 NFN–5 NFN–5 NFN–5 G14 G5, G14 ... G5 G14 G5, G14 800 800 800 800 800 800 650 650 650 650 650 NP NFN–5 NFN–5 NFN–5 NFN–5 NFN–5 NFN–5 G13 G5, G13 G13 G5, G13 ... G5 Notes ... ... ... ... ... ... 44 44 44 44 44 44 100 100 100 100 100 100 45 45 45 45 45 45 NP NP NP NP NP NP 7 8 9 10 11 12 ... ... ... ... ... ... 44 44 44 44 44 44 100 100 115 115 115 115 46 46 46 46 50 50 NP NP NP NP NP NP 13 14 15 ... ... ... 44 44 44 100 100 100 40 40 40 NP NP NP NP NP NP 1300 1300 1300 650 650 650 NFN–6 NFN–6 NFN–6 T15, W12 T15 T15 16 17 18 ... ... ... 44 44 44 105 105 105 45 45 45 NP NP NP NP NP NP 1000 1000 1000 NP NP NP NFN–6 NFN–6 NFN–6 G5, W12 G5 ... 19 20 21 22 ... ... ... ... 44 44 44 44 105 105 105 105 45 45 45 45 NP NP NP NP NP NP NP NP 1000 1000 1000 1000 NP NP NP NP NFN–6 NFN–6 NFN–6 NFN–6 G5 ... G5 ... 23 24 25 26 27 28 ... ... ... ... ... ... 44 44 44 44 44 44 105 105 105 105 105 105 45 45 45 45 45 45 NP NP NP NP NP NP NP NP NP NP NP NP 1000 1000 1000 1000 1000 1000 NP NP NP NP NP NP NFN–6 NFN–6 NFN–6 NFN–6 NFN–6 NFN–6 G5, G14 G14 G5 ... G5, G14 G14 29 30 31 32 33 ... ... ... ... ... 43 43 43 43 43 100 100 100 100 100 41 41 41 41 41 1000 NP NP NP NP NP NP NP NP NP 1250 1250 1250 1250 1250 650 NP NP 650 650 NFN–10 NFN–10 NFN–10 NFN–10 NFN–10 G5, T14, W12 T15 G5, T14 T15 G5, T14 34 35 36 37 ... ... ... ... 43 43 43 43 100 100 100 100 41 41 41 41 1000 1000 1000 1000 800 (Cl. 3 only) 800 800 800 (Cl. 3 only) 1250 1250 1250 1250 650 650 650 650 NFN–10 NFN–10 NFN–10 NFN–10 T15 G5, T14 G5, T14 T15 38 39 40 41 ... ... ... ... 43 43 43 43 100 100 100 100 41 41 41 41 NP NP 1000 1000 800 (Cl. 3 only) 800 (Cl. 3 only) 800 NP NP NP 1250 1250 NP NP 650 650 NFN–10 NFN–10 NFN–10 NFN–10 W5 G5, W5 G5, G14, T14, W6 G14, T15 800 800 800 800 800 800 (Cl. (Cl. (Cl. (Cl. (Cl. (Cl. 3 3 3 3 3 3 only) only) only) only) only) only) 247 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 24.3 24.3 28.6 28.6 24.3 24.3 ... ... ... ... ... ... 23.1 24.3 27.2 28.6 23.1 24.3 ... ... ... ... ... ... 21.8 24.3 25.7 28.6 21.8 24.3 ... ... ... ... ... ... 20.9 23.9 24.6 28.1 20.9 23.9 ... ... ... ... ... ... 20.2 23.7 23.7 27.8 20.2 23.7 ... ... ... ... ... ... 19.6 23.5 23.0 27.7 19.6 23.5 19.3 23.4 22.8 27.5 19.3 23.4 19.1 23.3 22.5 27.4 19.1 23.3 18.9 23.2 22.3 27.3 18.9 23.2 18.8 23.1 22.1 27.2 18.8 23.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 11 12 28.6 28.6 30.7 30.7 32.9 32.9 ... ... ... ... ... ... 27.8 28.6 27.8 30.7 30.2 32.9 ... ... ... ... ... ... 26.3 28.6 26.3 30.7 28.6 32.9 ... ... ... ... ... ... 25.1 28.1 25.1 30.7 27.3 32.3 ... ... ... ... ... ... 24.3 27.8 24.3 30.7 26.4 32.0 ... ... ... ... ... ... 23.6 27.7 23.6 30.7 25.6 31.8 23.3 27.5 23.3 30.7 25.3 31.7 23.0 27.4 23.0 30.7 25.0 31.5 22.8 27.3 22.8 30.7 24.8 31.4 22.6 27.2 22.6 30.5 24.6 31.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 26.7 26.7 26.7 ... ... ... 24.6 24.6 24.6 ... ... ... 22.7 22.7 22.7 ... ... ... 21.1 21.1 21.1 ... ... ... 20.0 20.0 20.0 ... ... ... 19.3 19.3 19.3 ... 19.1 19.1 18.9 18.9 18.9 ... 18.7 18.7 18.4 18.4 18.4 ... 18.1 18.1 17.5 17.5 17.5 ... 16.8 16.8 16 17 18 30.0 30.0 30.0 ... ... ... 30.0 30.0 28.2 ... ... ... 30.0 30.0 26.1 ... ... ... 30.0 30.0 24.7 ... ... ... 30.0 30.0 23.9 ... ... ... 29.8 29.8 23.7 29.8 29.8 23.6 29.7 29.7 23.4 29.6 29.6 23.2 29.6 29.6 22.9 29.5 29.5 22.4 29.5 29.5 22.0 29.2 29.2 21.6 19 20 21 22 30.0 30.0 30.0 30.0 ... ... ... ... 30.0 28.2 30.0 28.2 ... ... ... ... 30.0 26.1 30.0 26.1 ... ... ... ... 30.0 24.7 30.0 24.7 ... ... ... ... 30.0 23.9 30.0 23.9 ... ... ... ... 29.8 23.7 29.8 23.7 29.8 23.6 29.8 23.6 29.7 23.4 29.7 23.4 29.6 23.2 29.6 23.2 29.6 22.9 29.6 22.9 29.5 22.4 29.5 22.4 29.5 22.0 29.5 22.0 29.2 21.6 29.2 21.6 23 24 25 26 27 28 25.5 25.5 30.0 30.0 25.5 25.5 ... ... ... ... ... ... 25.5 24.0 30.0 28.2 25.5 24.0 ... ... ... ... ... ... 25.5 22.2 30.0 26.1 25.5 22.2 ... ... ... ... ... ... 25.5 21.0 30.0 24.7 25.5 21.0 ... ... ... ... ... ... 25.5 20.3 30.0 23.9 25.5 20.3 ... ... ... ... ... ... 25.4 20.1 29.8 23.7 25.4 20.1 25.3 20.0 29.8 23.6 25.3 20.0 25.2 19.9 29.7 23.4 25.2 19.9 25.2 19.7 29.6 23.2 25.2 19.7 25.1 19.4 29.6 22.9 25.1 19.4 25.1 19.1 29.5 22.4 25.1 19.1 25.1 18.7 29.5 22.0 25.1 18.7 24.8 18.4 29.2 21.6 24.8 18.4 29 30 31 32 33 27.3 27.3 27.3 27.3 27.3 ... ... ... ... ... 27.3 24.9 27.3 24.9 27.3 ... ... ... ... ... 27.3 23.0 27.3 23.0 27.3 ... ... ... ... ... 27.3 21.3 27.3 21.3 27.3 ... ... ... ... ... 26.9 19.9 26.9 19.9 26.9 ... ... ... ... ... 25.2 18.7 25.2 18.7 25.2 24.6 18.2 24.6 18.2 24.6 24.0 17.8 24.0 17.8 24.0 23.5 17.4 23.5 17.4 23.5 23.1 17.1 23.1 17.1 23.1 22.8 16.9 22.8 16.9 22.8 22.6 16.7 22.6 16.7 22.6 22.4 16.6 22.4 16.6 22.4 34 35 36 37 27.3 27.3 27.3 27.3 ... ... ... ... 24.9 27.3 27.3 24.9 ... ... ... ... 23.0 27.3 27.3 23.0 ... ... ... ... 21.3 27.3 27.3 21.3 ... ... ... ... 19.9 26.9 26.9 19.9 ... ... ... ... 18.7 25.2 25.2 18.7 18.2 24.6 24.6 18.2 17.8 24.0 24.0 17.8 17.4 23.5 23.5 17.4 17.1 23.1 23.1 17.1 16.9 22.8 22.8 16.9 16.7 22.6 22.6 16.7 16.6 22.4 22.4 16.6 38 39 40 41 27.3 27.3 23.2 23.2 ... ... ... ... 24.9 27.3 23.2 21.1 ... ... ... ... 23.0 27.3 23.2 19.6 ... ... ... ... 21.3 27.3 23.2 18.1 ... ... ... ... 19.9 26.9 22.8 16.9 ... ... ... ... 18.7 25.2 21.5 15.9 18.2 24.6 20.9 15.5 17.8 24.0 20.4 15.1 17.4 23.5 20.0 14.8 17.1 23.1 19.6 14.5 ... ... 19.4 14.3 ... ... 19.2 14.2 ... ... 19.0 14.1 248 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 11 12 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 13 14 15 16.0 16.0 16.0 ... 14.9 14.9 12.4 12.4 12.4 ... 9.3 9.3 6.0 6.0 6.0 ... 4.8 4.8 3.5 3.5 3.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 29.1 29.1 21.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 19 20 21 22 29.1 21.6 29.1 21.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 23 24 25 26 27 28 24.7 18.4 29.1 21.6 24.7 18.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 29 30 31 32 33 22.3 16.5 22.3 16.5 22.3 18.5 16.5 18.5 16.5 18.5 15.0 15.0 15.0 15.0 15.0 12.2 12.2 12.2 12.2 12.2 9.8 9.8 9.8 9.8 9.8 7.8 7.8 7.8 7.8 7.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 34 35 36 37 16.5 22.3 22.3 16.5 16.5 18.5 18.5 16.5 15.0 15.0 15.0 15.0 12.2 12.2 12.2 12.2 9.8 9.8 9.8 9.8 7.8 7.8 7.8 7.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 38 39 40 41 ... ... 19.0 14.0 ... ... 15.7 14.0 ... ... 12.8 12.8 ... ... 10.4 10.4 ... ... 8.3 8.3 ... ... 6.6 6.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 249 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr 54Ni–16Mo–15Cr Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube Wld. tube Wld. tube SB–622 SB–622 SB–626 SB–626 SB–626 SB–626 ... ... ... ... ... ... N10276 N10276 N10276 N10276 N10276 N10276 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 7 8 9 10 Ni–28Mo–3Fe–1.3Cr–0.25Al Ni–28Mo–3Fe–1.3Cr–0.25Al Ni–28Mo–3Fe–1.3Cr–0.25Al Ni–28Mo–3Fe–1.3Cr–0.25Al Plate, sheet, strip Plate, sheet, strip Rod Rod SB–333 SB–333 SB–335 SB–335 ... ... ... ... N10629 N10629 N10629 N10629 Solution Solution Solution Solution ann. ann. ann. ann. 11 12 13 Ni–28Mo–3Fe–1.3Cr–0.25Al Ni–28Mo–3Fe–1.3Cr–0.25Al Ni–28Mo–3Fe–1.3Cr–0.25Al Smls. & wld. fittings Forged fittings Forged fittings SB–366 SB–462 SB–462 ... ... ... N10629 N10629 N10629 Solution ann. Solution ann. Solution ann. 14 15 16 17 Ni–28Mo–3Fe–1.3Cr–0.25Al Ni–28Mo–3Fe–1.3Cr–0.25Al Ni–28Mo–3Fe–1.3Cr–0.25Al Ni–28Mo–3Fe–1.3Cr–0.25Al Forgings Forgings Wld. pipe Wld. pipe SB–564 SB–564 SB–619 SB–619 ... ... ... ... N10629 N10629 N10629 N10629 Solution Solution Solution Solution ann. ann. ann. ann. 18 19 20 21 Ni–28Mo–3Fe–1.3Cr–0.25Al Ni–28Mo–3Fe–1.3Cr–0.25Al Ni–28Mo–3Fe–1.3Cr–0.25Al Ni–28Mo–3Fe–1.3Cr–0.25Al Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–622 SB–622 SB–626 SB–626 ... ... ... ... N10629 N10629 N10629 N10629 Solution Solution Solution Solution ann. ann. ann. ann. 22 23 24 25 26 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe Smls. & wld. fittings Wld. pipe Wld. pipe Wld. tube Wld. tube SB–366 SB–619 SB–619 SB–626 SB–626 ... ... ... ... ... N10665 N10665 N10665 N10665 N10665 Annealed Annealed Annealed Annealed Annealed 27 28 29 30 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe Plate, sheet, strip Plate, sheet, strip Rod Rod SB–333 SB–333 SB–335 SB–335 ... ... ... ... N10665 N10665 N10665 N10665 Solution Solution Solution Solution ann. ann. ann. ann. 31 32 33 34 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe Forgings Forgings Forgings Forgings SB–462 SB–462 SB–564 SB–564 ... ... ... ... N10665 N10665 N10665 N10665 Solution Solution Solution Solution ann. ann. ann. ann. 35 36 37 38 39 40 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe 65Ni–28Mo–2Fe Wld. pipe Wld. pipe Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–619 SB–619 SB–622 SB–622 SB–626 SB–626 ... ... ... ... ... ... N10665 N10665 N10665 N10665 N10665 N10665 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 41 42 43 44 45 65Ni–29.5Mo–2Fe–2Cr 65Ni–29.5Mo–2Fe–2Cr 65Ni–29.5Mo–2Fe–2Cr 65Ni–29.5Mo–2Fe–2Cr 65Ni–29.5Mo–2Fe–2Cr Plate, sheet, strip Plate, sheet, strip Rod Rod Smls. & wld. fittings SB–333 SB–333 SB–335 SB–335 SB–366 ... ... ... ... ... N10675 N10675 N10675 N10675 N10675 Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. 250 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... ... ... ... 43 43 43 43 43 43 100 100 100 100 100 100 41 41 41 41 41 41 1000 1000 NP NP 1000 1000 800 800 (Cl. 3 only) 800 (Cl. 3 only) 800 (Cl. 3 only) 800 NP 1250 1250 NP NP 1250 1250 650 650 NP NP 650 650 NFN–10 NFN–10 NFN–10 NFN–10 NFN–10 NFN–10 G5, T14 T15 W5 G5, W5 G5, G14, T14, W6 G14, T15 7 8 9 10 ... ... ... ... 44 44 44 44 110 110 110 110 51 51 51 51 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–16 NFN–16 NFN–16 NFN–16 G5 ... G5 ... 11 12 13 ... ... ... 44 44 44 110 110 110 51 51 51 NP NP NP NP NP NP 800 800 800 NP NP NP NFN–16 NFN–16 NFN–16 G5, W12 G5 ... 14 15 16 17 ... ... ... ... 44 44 44 44 110 110 110 110 51 51 51 51 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–16 NFN–16 NFN–16 NFN–16 G5 ... G5, G14 G14 18 19 20 21 ... ... ... ... 44 44 44 44 110 110 110 110 51 51 51 51 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–16 NFN–16 NFN–16 NFN–16 G5 ... G5, G14 G14 22 23 24 25 26 ... ... ... ... ... 44 44 44 44 44 110 110 110 110 110 51 51 51 51 51 NP NP NP NP NP 800 800 800 800 NP (Cl. 3 (Cl. 3 (Cl. 3 (Cl. 3 only) only) only) only) 800 NP NP NP NP 650 NP NP NP NP NFN–16 NFN–16 NFN–16 NFN–16 NFN–16 G5, W12 G5, W5 W5 G5, W5 W5 27 28 29 30 ... ... ... ... 44 44 44 44 110 110 110 110 51 51 51 51 NP NP NP NP 800 800 800 800 (Cl. (Cl. (Cl. (Cl. only) only) only) only) 800 800 800 800 650 NP 650 650 NFN–16 NFN–16 NFN–16 NFN–16 ... G5 G13 G5, G13 31 32 33 34 ... ... ... ... 44 44 44 44 110 110 110 110 51 51 51 51 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–16 NFN–16 NFN–16 NFN–16 ... G5 ... G5 35 36 37 38 39 40 ... ... ... ... ... ... 44 44 44 44 44 44 110 110 110 110 110 110 51 51 51 51 51 51 NP NP NP NP NP NP NP NP 800 (Cl. 3 only) 800 (Cl. 3 only) NP NP 800 800 800 800 800 800 650 650 650 650 650 650 NFN–16 NFN–16 NFN–16 NFN–16 NFN–16 NFN–16 G14 G5, G14 ... G5 G5, G14 G14 41 42 43 44 45 ... ... ... ... ... 44 44 44 44 44 110 110 110 110 110 51 51 51 51 51 NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 650 650 650 650 650 NFN–16 NFN–16 NFN–16 NFN–16 NFN–16 G5 ... G5 ... G5, W12 3 3 3 3 251 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 27.3 27.3 27.3 27.3 23.2 23.2 ... ... ... ... ... ... 27.3 24.9 24.9 27.3 23.2 21.1 ... ... ... ... ... ... 27.3 23.0 23.0 27.3 23.2 19.6 ... ... ... ... ... ... 27.3 21.3 21.3 27.3 23.2 18.1 ... ... ... ... ... ... 26.9 19.9 19.9 26.9 22.8 16.9 ... ... ... ... ... ... 25.2 18.7 18.7 25.2 21.5 15.9 24.6 18.2 18.2 24.6 20.9 15.5 24.0 17.8 17.8 24.0 20.4 15.1 23.5 17.4 17.4 23.5 20.0 14.8 23.1 17.1 17.1 23.1 19.6 14.5 22.8 16.9 ... ... 19.4 14.3 22.6 16.7 ... ... 19.2 14.2 22.4 16.6 ... ... 19.0 14.1 7 8 9 10 31.4 31.4 31.4 31.4 ... ... ... ... 31.4 31.4 31.4 31.4 ... ... ... ... 31.4 29.6 31.4 29.6 ... ... ... ... 31.4 28.1 31.4 28.1 ... ... ... ... 31.1 27.0 31.1 27.0 ... ... ... ... 30.6 26.1 30.6 26.1 30.4 25.8 30.4 25.8 30.2 25.5 30.2 25.5 30.1 25.3 30.1 25.3 29.9 25.1 29.9 25.1 ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 31.4 31.4 31.4 ... ... ... 31.4 31.4 31.4 ... ... ... 31.4 31.4 29.6 ... ... ... 31.4 31.4 28.1 ... ... ... 31.1 31.1 27.0 ... ... ... 30.6 30.6 26.1 30.4 30.4 25.8 30.2 30.2 25.5 30.1 30.1 25.3 29.9 29.9 25.1 ... ... ... ... ... ... ... ... ... 14 15 16 17 31.4 31.4 26.7 26.7 ... ... ... ... 31.4 31.4 26.7 26.7 ... ... ... ... 31.4 29.6 26.7 25.2 ... ... ... ... 31.4 28.1 26.7 23.9 ... ... ... ... 31.1 27.0 26.4 23.0 ... ... ... ... 30.6 26.1 26.0 22.2 30.4 25.8 25.8 21.9 30.2 25.5 25.7 21.7 30.1 25.3 25.6 21.5 29.9 25.1 25.4 21.3 ... ... ... ... ... ... ... ... ... ... ... ... 18 19 20 21 31.4 31.4 26.7 26.7 ... ... ... ... 31.4 31.4 26.7 26.7 ... ... ... ... 31.4 29.6 26.7 25.2 ... ... ... ... 31.4 28.1 26.7 23.9 ... ... ... ... 31.1 27.0 26.4 23.0 ... ... ... ... 30.6 26.1 26.0 22.2 30.4 25.8 25.8 21.9 30.2 25.5 25.7 21.7 30.1 25.3 25.6 21.5 29.9 25.1 25.4 21.3 ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 26 31.4 31.4 31.4 31.4 31.4 ... ... ... ... ... 31.4 31.4 31.4 31.4 31.4 ... ... ... ... ... 31.4 31.4 30.2 31.4 30.2 ... ... ... ... ... 31.4 31.4 28.9 31.4 28.9 ... ... ... ... ... 31.4 31.4 27.9 31.4 27.9 ... ... ... ... ... 31.2 31.2 27.2 31.2 27.2 31.1 31.1 26.9 31.1 26.9 30.9 30.9 26.6 30.9 26.6 30.7 30.7 26.2 30.7 26.2 30.6 30.6 25.8 30.6 25.8 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 31.4 31.4 31.4 31.4 ... ... ... ... 31.4 31.4 31.4 31.4 ... ... ... ... 30.2 31.4 30.2 31.4 ... ... ... ... 28.9 31.4 28.9 31.4 ... ... ... ... 27.9 31.4 27.9 31.4 ... ... ... ... 27.2 31.2 27.2 31.2 26.9 31.1 26.9 31.1 26.6 30.9 26.6 30.9 26.2 30.7 26.2 30.7 25.8 30.6 25.8 30.6 ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 31.4 31.4 31.4 31.4 ... ... ... ... 31.4 31.4 31.4 31.4 ... ... ... ... 30.2 31.4 30.2 31.4 ... ... ... ... 28.9 31.4 28.9 31.4 ... ... ... ... 27.9 31.4 27.9 31.4 ... ... ... ... 27.2 31.2 27.2 31.2 26.9 31.1 26.9 31.1 26.6 30.9 26.6 30.9 26.2 30.7 26.2 30.7 25.8 30.6 25.8 30.6 ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 38 39 40 26.7 26.7 31.4 31.4 26.7 26.7 ... ... ... ... ... ... 26.7 26.7 31.4 31.4 26.7 26.7 ... ... ... ... ... ... 25.7 26.7 30.2 31.4 26.7 25.7 ... ... ... ... ... ... 24.6 26.7 28.9 31.4 26.7 24.6 ... ... ... ... ... ... 23.7 26.7 27.9 31.4 26.7 23.7 ... ... ... ... ... ... 23.1 26.5 27.2 31.2 26.5 23.1 22.9 26.4 26.9 31.1 26.4 22.9 22.6 26.3 26.6 30.9 26.3 22.6 22.3 26.1 26.2 30.7 26.1 22.3 21.9 26.0 25.8 30.6 26.0 21.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 45 31.4 31.4 31.4 31.4 31.4 ... ... ... ... ... 31.4 31.4 31.4 31.4 31.4 ... ... ... ... ... 31.4 30.3 31.4 30.3 31.4 ... ... ... ... ... 31.4 28.8 31.4 28.8 31.4 ... ... ... ... ... 31.1 27.4 31.1 27.4 31.1 ... ... ... ... ... 30.6 26.3 30.6 26.3 30.6 30.4 25.8 30.4 25.8 30.4 30.2 25.4 30.2 25.4 30.2 30.1 25.1 30.1 25.1 30.1 29.9 24.8 29.9 24.8 29.9 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 252 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 22.3 16.5 ... ... 19.0 14.0 18.5 16.5 ... ... 15.7 14.0 15.0 15.0 ... ... 12.8 12.8 12.2 12.2 ... ... 10.4 10.4 9.8 9.8 ... ... 8.3 8.3 7.8 7.8 ... ... 6.6 6.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 14 15 16 17 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 18 19 20 21 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 22 23 24 25 26 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 38 39 40 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 41 42 43 44 45 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 253 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 65Ni–29.5Mo–2Fe–2Cr 65Ni–29.5Mo–2Fe–2Cr 65Ni–29.5Mo–2Fe–2Cr 65Ni–29.5Mo–2Fe–2Cr 65Ni–29.5Mo–2Fe–2Cr 65Ni–29.5Mo–2Fe–2Cr Forgings Forgings Forgings Forgings Wld. pipe Wld. pipe SB–462 SB–462 SB–564 SB–564 SB–619 SB–619 ... ... ... ... ... ... N10675 N10675 N10675 N10675 N10675 N10675 Solution Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. ann. 7 8 9 10 65Ni–29.5Mo–2Fe–2Cr 65Ni–29.5Mo–2Fe–2Cr 65Ni–29.5Mo–2Fe–2Cr 65Ni–29.5Mo–2Fe–2Cr Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–622 SB–622 SB–626 SB–626 ... ... ... ... N10675 N10675 N10675 N10675 Solution Solution Solution Solution ann. ann. ann. ann. 11 12 13 14 15 37Ni–30Co–28Cr–2.7Si 37Ni–30Co–28Cr–2.7Si 37Ni–30Co–28Cr–2.7Si 37Ni–30Co–28Cr–2.7Si 37Ni–30Co–28Cr–2.7Si Smls. & wld. fittings Plate, sheet, strip Plate, sheet, strip Forgings Forgings SB–366 SB–435 SB–435 SB–564 SB–564 ... ... ... ... ... N12160 N12160 N12160 N12160 N12160 Solution Solution Solution Solution Solution ann. ann. ann. ann. ann. 16 17 18 19 37Ni–30Co–28Cr–2.7Si 37Ni–30Co–28Cr–2.7Si 37Ni–30Co–28Cr–2.7Si 37Ni–30Co–28Cr–2.7Si Rod Rod Wld. pipe Wld. pipe SB–572 SB–572 SB–619 SB–619 ... ... ... ... N12160 N12160 N12160 N12160 Solution Solution Solution Solution ann. ann. ann. ann. 20 21 22 23 37Ni–30Co–28Cr–2.7Si 37Ni–30Co–28Cr–2.7Si 37Ni–30Co–28Cr–2.7Si 37Ni–30Co–28Cr–2.7Si Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube SB–622 SB–622 SB–626 SB–626 ... ... ... ... N12160 N12160 N12160 N12160 Solution Solution Solution Solution ann. ann. ann. ann. 24 25 26 59Ni–22Cr–14Mo–4Fe–3W 53Ni–17Mo–16Cr–6Fe–5W 62Ni–28Mo–5Fe Castings Castings Castings SA–494 SA–494 SA–494 CX2MW CW–12MW/C N–12MV/B N26022 N30002 N30012 Solution ann. Annealed Annealed 27 28 29 30 33Cr–31Ni–32Fe–1.5Mo–0.6Cu–N 33Cr–31Ni–32Fe–1.5Mo–0.6Cu–N 33Cr–31Ni–32Fe–1.5Mo–0.6Cu–N 33Cr–31Ni–32Fe–1.5Mo–0.6Cu–N Smls. & wld. fittings Forged fittings Forgings Wld. pipe SB–366 SB–462 SB–564 SB–619 ... ... ... ... R20033 R20033 R20033 R20033 Solution Solution Solution Solution ann. ann. ann. ann. 31 32 33 34 33Cr–31Ni–32Fe–1.5Mo–0.6Cu–N 33Cr–31Ni–32Fe–1.5Mo–0.6Cu–N 33Cr–31Ni–32Fe–1.5Mo–0.6Cu–N 33Cr–31Ni–32Fe–1.5Mo–0.6Cu–N Smls. pipe & tube Plate, sheet, strip Wld. tube Rod SB–622 SB–625 SB–626 SB–649 ... ... ... ... R20033 R20033 R20033 R20033 Solution Solution Solution Solution ann. ann. ann. ann. 35 36 37 38 39 40 21Ni–30Fe–22Cr–18Co–3Mo–3W 21Ni–30Fe–22Cr–18Co–3Mo–3W 21Ni–30Fe–22Cr–18Co–3Mo–3W 21Ni–30Fe–22Cr–18Co–3Mo–3W 21Ni–30Fe–22Cr–18Co–3Mo–3W 21Ni–30Fe–22Cr–18Co–3Mo–3W Plate, sheet, strip Plate, sheet, strip Rod Rod Wld. pipe Wld. pipe SB–435 SB–435 SB–572 SB–572 SB–619 SB–619 ... ... ... ... ... ... R30556 R30556 R30556 R30556 R30556 R30556 Annealed Annealed Annealed Annealed Annealed Annealed 254 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... ... ... ... 44 44 44 44 44 44 110 110 110 110 110 110 51 51 51 51 51 51 NP NP NP NP NP NP NP NP NP NP NP NP 800 800 800 800 800 800 NP NP 650 650 650 650 NFN–16 NFN–16 NFN–16 NFN–16 NFN–16 NFN–16 G5 ... G5 ... G5, G14 G14 7 8 9 10 ... ... ... ... 44 44 44 44 110 110 110 110 51 51 51 51 NP NP NP NP NP NP NP NP 800 800 800 800 650 650 650 650 NFN–16 NFN–16 NFN–16 NFN–16 G5 ... G5, G14 G14 11 12 13 14 15 ... ... ... ... ... 46 46 46 46 46 90 90 90 90 90 35 35 35 35 35 NP NP NP NP NP NP NP NP NP NP 1500 1500 1500 1500 1500 NP NP NP NP NP NFN–13 NFN–13 NFN–13 NFN–13 NFN–13 G5, T14, W12 T14 G5, T14 T14 G5, T14 16 17 18 19 ... ... ... ... 46 46 46 46 90 90 90 90 35 35 35 35 NP NP NP NP NP NP NP NP 1500 1500 1500 1500 NP NP NP NP NFN–13 NFN–13 NFN–13 NFN–13 T14 G5, T14 G14, T14 G5, G14, T14 20 21 22 23 ... ... ... ... 46 46 46 46 90 90 90 90 35 35 35 35 NP NP NP NP NP NP NP NP 1500 1500 1500 1500 NP NP NP NP NFN–13 NFN–13 NFN–13 NFN–13 T14 G5, T14 G14, T14 G5, G14, T14 24 25 26 ... ... ... 43 ... ... 80 72 76 45 40 40 NP NP NP NP NP NP 500 1000 1000 500 650 650 NFN–10 NFN–10 NFN–10 G15 G15, W1 G15, W1 27 28 29 30 ... ... ... ... 45 45 45 45 109 109 109 109 55 55 55 55 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–10 NFN–10 NFN–10 NFN–10 W12 ... ... G14 31 32 33 34 ... ... ... ... 45 45 45 45 109 109 109 109 55 55 55 55 NP NP NP NP NP NP NP NP 800 800 800 800 NP NP NP NP NFN–10 NFN–10 NFN–10 NFN–10 ... ... G14 ... 35 36 37 38 39 40 ... ... ... ... ... ... 45 45 45 45 45 45 100 100 100 100 100 100 45 45 45 45 45 45 NP NP NP NP NP NP NP NP NP NP NP NP 1650 1650 1650 1650 1650 1650 650 650 650 650 650 650 NFN–15 NFN–15 NFN–15 NFN–15 NFN–15 NFN–15 G4, G4, G4, G4, G4, G4, 255 T17 G5, T16 T17 G5, T16 G14, T16 G5, G14, T15 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 31.4 31.4 31.4 31.4 26.7 26.7 ... ... ... ... ... ... 31.4 31.4 31.4 31.4 26.7 26.7 ... ... ... ... ... ... 31.4 30.3 31.4 30.3 26.7 25.8 ... ... ... ... ... ... 31.4 28.8 31.4 28.8 26.7 24.5 ... ... ... ... ... ... 31.1 27.4 31.1 27.4 26.4 23.4 ... ... ... ... ... ... 30.6 26.3 30.6 26.3 26.0 22.4 30.4 25.8 30.4 25.8 25.8 21.9 30.2 25.4 30.2 25.4 25.7 21.6 30.1 25.1 30.1 25.1 25.6 21.3 29.9 24.8 29.9 24.8 25.4 21.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 31.4 31.4 26.7 26.7 ... ... ... ... 31.4 31.4 26.7 26.7 ... ... ... ... 31.4 30.3 26.7 25.8 ... ... ... ... 31.4 28.8 26.7 24.5 ... ... ... ... 31.1 27.4 26.4 23.4 ... ... ... ... 30.6 26.3 26.0 22.4 30.4 25.8 25.8 21.9 30.2 25.4 25.7 21.6 30.1 25.1 25.6 21.3 29.9 24.8 25.4 21.1 ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 15 23.3 23.3 23.3 23.3 23.3 ... ... ... ... ... 23.3 20.5 23.3 20.5 23.3 ... ... ... ... ... 23.3 18.3 23.3 18.3 23.3 ... ... ... ... ... 22.2 16.5 22.2 16.5 22.2 ... ... ... ... ... 20.3 15.0 20.3 15.0 20.3 ... ... ... ... ... 19.0 14.1 19.0 14.1 19.0 18.6 13.8 18.6 13.8 18.6 18.4 13.6 18.4 13.6 18.4 18.3 13.6 18.3 13.6 18.3 18.3 13.5 18.3 13.5 18.3 18.3 13.5 18.3 13.5 18.3 18.3 13.5 18.3 13.5 18.3 18.3 13.5 18.3 13.5 18.3 16 17 18 19 23.3 23.3 19.8 19.8 ... ... ... ... 20.5 23.3 17.4 19.8 ... ... ... ... 18.3 23.3 15.6 19.8 ... ... ... ... 16.5 22.2 14.0 18.9 ... ... ... ... 15.0 20.3 12.8 17.3 ... ... ... ... 14.1 19.0 12.0 16.2 13.8 18.6 11.7 15.8 13.6 18.4 11.6 15.6 13.6 18.3 11.6 15.6 13.5 18.3 11.5 15.6 13.5 18.3 11.5 15.6 13.5 18.3 11.5 15.6 13.5 18.3 11.5 15.6 20 21 22 23 23.3 23.3 19.8 19.8 ... ... ... ... 20.5 23.3 17.4 19.8 ... ... ... ... 18.3 23.3 15.6 19.8 ... ... ... ... 16.5 22.2 14.0 18.9 ... ... ... ... 15.0 20.3 12.8 17.3 ... ... ... ... 14.1 19.0 12.0 16.2 13.8 18.6 11.7 15.8 13.6 18.4 11.6 15.6 13.6 18.3 11.6 15.6 13.5 18.3 11.5 15.6 13.5 18.3 11.5 15.6 13.5 18.3 11.5 15.6 13.5 18.3 11.5 15.6 24 25 26 22.9 20.6 21.7 ... ... ... 22.2 19.5 20.3 ... ... ... 21.6 18.5 20.3 ... ... ... 21.4 18.5 20.3 ... ... ... 21.4 18.1 20.3 ... ... ... ... 16.9 18.6 ... 16.9 18.3 ... 16.9 18.0 ... 16.9 17.7 ... 16.9 17.3 ... 16.9 17.0 ... 16.5 16.6 ... 16.1 16.2 27 28 29 30 31.1 31.1 31.1 26.4 ... ... ... ... 30.9 30.9 30.9 26.3 ... ... ... ... 28.1 28.1 28.1 23.9 ... ... ... ... 26.1 26.1 26.1 22.2 ... ... ... ... 24.8 24.8 24.8 21.1 ... ... ... ... 23.6 23.6 23.6 20.1 23.5 23.5 23.5 20.0 23.1 23.1 23.1 19.6 22.9 22.9 22.9 19.5 22.6 22.6 22.6 19.2 ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 31.1 31.1 26.4 31.1 ... ... ... ... 30.9 30.9 26.3 30.9 ... ... ... ... 28.1 28.1 23.9 28.1 ... ... ... ... 26.1 26.1 22.2 26.1 ... ... ... ... 24.8 24.8 21.1 24.8 ... ... ... ... 23.6 23.6 20.1 23.6 23.5 23.5 20.0 23.5 23.1 23.1 19.6 23.1 22.9 22.9 19.5 22.9 22.6 22.6 19.2 22.6 ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 38 39 40 28.6 28.6 28.6 28.6 24.3 24.3 ... ... ... ... ... ... 25.6 28.6 25.6 28.6 21.8 24.3 ... ... ... ... ... ... 23.1 28.0 23.1 28.0 19.6 23.8 ... ... ... ... ... ... 21.3 27.1 21.3 27.1 18.1 23.0 ... ... ... ... ... ... 20.1 26.4 20.1 26.4 17.1 22.5 ... ... ... ... ... ... 19.3 26.0 19.3 26.0 16.4 22.1 18.9 25.6 18.9 25.6 16.1 21.7 18.7 25.2 18.7 25.2 15.9 21.4 18.4 24.9 18.4 24.9 15.7 21.1 18.2 24.6 18.2 24.6 15.5 20.9 18.0 24.3 18.0 24.3 15.3 20.7 17.8 24.1 17.8 24.1 15.2 20.5 17.6 23.8 17.6 23.8 15.0 20.2 256 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 15 16.6 13.5 16.6 13.5 16.6 13.5 13.5 13.5 13.5 13.5 11.0 11.0 11.0 11.0 11.0 9.1 9.1 9.1 9.1 9.1 7.5 7.5 7.5 7.5 7.5 6.2 6.2 6.2 6.2 6.2 5.1 5.1 5.1 5.1 5.1 4.3 4.3 4.3 4.3 4.3 3.6 3.6 3.6 3.6 3.6 3.0 3.0 3.0 3.0 3.0 2.5 2.5 2.5 2.5 2.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 16 17 18 19 13.5 16.6 11.5 14.1 13.5 13.5 11.5 11.5 11.0 11.0 9.4 9.4 9.1 9.1 7.7 7.7 7.5 7.5 6.4 6.4 6.2 6.2 5.3 5.3 5.1 5.1 4.3 4.3 4.3 4.3 3.7 3.7 3.6 3.6 3.1 3.1 3.0 3.0 2.6 2.6 2.5 2.5 2.1 2.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 13.5 16.6 11.5 14.1 13.5 13.5 11.5 11.5 11.0 11.0 9.4 9.4 9.1 9.1 7.7 7.7 7.5 7.5 6.4 6.4 6.2 6.2 5.3 5.3 5.1 5.1 4.3 4.3 4.3 4.3 3.7 3.7 3.6 3.6 3.1 3.1 3.0 3.0 2.6 2.6 2.5 2.5 2.1 2.1 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 ... 15.8 15.7 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 27 28 29 30 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 31 32 33 34 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35 36 37 38 39 40 17.5 23.6 17.5 23.6 14.8 20.0 17.3 23.3 17.3 23.3 14.7 19.8 17.1 21.2 17.1 21.2 14.5 18.0 16.9 17.0 16.9 17.0 14.4 14.4 13.6 13.6 13.6 13.6 11.6 11.6 10.9 10.9 10.9 10.9 9.3 9.3 8.8 8.8 8.8 8.8 7.5 7.5 7.0 7.0 7.0 7.0 6.0 6.0 5.6 5.6 5.6 5.6 4.8 4.8 4.5 4.5 4.5 4.5 3.8 3.8 3.6 3.6 3.6 3.6 3.1 3.1 2.7 2.7 2.7 2.7 2.3 2.3 2.1 2.1 2.1 2.1 1.8 1.8 1.6 1.6 1.6 1.6 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 257 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper 21Ni–30Fe–22Cr–18Co–3Mo–3W 21Ni–30Fe–22Cr–18Co–3Mo–3W 21Ni–30Fe–22Cr–18Co–3Mo–3W 21Ni–30Fe–22Cr–18Co–3Mo–3W Co–26Cr–9Ni–5Mo–3Fe–2W Co–26Cr–9Ni–5Mo–3Fe–2W Smls. pipe & tube Smls. pipe & tube Wld. tube Wld. tube Rod Plate, sheet, strip SB–622 SB–622 SB–626 SB–626 SB–815 SB–818 ... ... ... ... ... ... R30556 R30556 R30556 R30556 R31233 R31233 Annealed Annealed Annealed Annealed Solution ann. Solution ann. 7 8 9 10 Ti Ti Ti Ti Plate, sheet, strip Smls. tube Wld. tube Bar, billet SB–265 SB–338 SB–338 SB–348 1 1 1 1 R50250 R50250 R50250 R50250 Annealed Annealed Annealed Annealed 11 12 13 14 Ti Ti Ti Ti Smls. & wld. fittings Forgings Smls. pipe Wld. pipe SB–363 SB–381 SB–861 SB–862 WPT1 F–1 1 1 R50250 R50250 R50250 R50250 Annealed Annealed Annealed Annealed 15 16 17 18 19 Ti Ti Ti Ti Ti Castings Plate, sheet, strip Smls. tube Wld. tube Bar, billet SB–367 SB–265 SB–338 SB–338 SB–348 C–2 2 2 2 2 R50400 R50400 R50400 R50400 R50400 ... Annealed Annealed Annealed Annealed 20 21 22 23 Ti Ti Ti Ti Smls. & wld. fittings Forgings Smls. pipe Wld. pipe SB–363 SB–381 SB–861 SB–862 WPT2 F–2 2 2 R50400 R50400 R50400 R50400 Annealed Annealed Annealed Annealed 24 25 26 27 28 29 Ti Ti Ti Ti Ti Ti Plate, sheet, strip Smls. tube Wld. tube Bar, billet Smls. fittings Wld. fittings SB–265 SB–338 SB–338 SB–348 SB–363 SB–363 2H 2H 2H 2H WPT2H WPT2HW R50400 R50400 R50400 R50400 R50400 R50400 Annealed Annealed Annealed Annealed Annealed Annealed 30 31 32 Ti Ti Ti Forgings Smls. pipe Wld. pipe SB–381 SB–861 SB–862 F–2H 2H 2H R50400 R50400 R50400 Annealed Annealed Annealed 33 34 35 36 37 38 Ti Ti Ti Ti Ti Ti Castings Plate, sheet, strip Smls. tube Wld. tube Bar, billet Smls. & wld. fittings SB–367 SB–265 SB–338 SB–338 SB–348 SB–363 C–3 3 3 3 3 WPT3 R50550 R50550 R50550 R50550 R50550 R50550 ... Annealed Annealed Annealed Annealed Annealed 39 40 41 Ti Ti Ti Forgings Smls. pipe Wld. pipe SB–381 SB–861 SB–862 F–3 3 3 R50550 R50550 R50550 Annealed Annealed Annealed 42 43 44 Ti–Pd Ti–Pd Ti–Ru Plate, sheet, strip Plate, sheet, strip Plate, sheet, strip SB–265 SB–265 SB–265 11 17 27 R52250 R52252 R52254 Annealed Annealed Annealed 258 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... ... ... ... 45 45 45 45 49 49 100 100 100 100 130 130 45 45 45 45 55 55 NP NP NP NP NP NP NP NP NP NP NP NP 1650 1650 1650 1650 800 800 650 650 650 650 NP NP NFN–15 NFN–15 NFN–15 NFN–15 NFN–15 NFN–15 7 8 9 10 ... ... ... ... 51 51 51 51 35 35 35 35 20 20 20 20 600 600 600 600 600 600 600 600 600 600 600 600 NP NP NP NP NFT–3 NFT–3 NFT–3 NFT–3 ... ... G14, W6 ... 11 12 13 14 ... ... ... ... 51 51 51 51 35 35 35 35 20 20 20 20 NP NP 600 600 600 600 600 600 600 600 600 600 NP NP NP NP NFT–3 NFT–3 NFT–3 NFT–3 W5, W12 ... ... G14, W6 15 16 17 18 19 ... ... ... ... ... 51 51 51 51 51 50 50 50 50 50 40 40 40 40 40 NP 600 600 600 600 NP 600 600 600 600 500 600 600 600 600 500 600 600 600 600 NFT–2 NFT–2 NFT–2 NFT–2 NFT–2 G15, W1 ... ... G14, W6 ... 20 21 22 23 ... ... ... ... 51 51 51 51 50 50 50 50 40 40 40 40 NP NP 600 600 600 600 600 600 600 600 600 600 600 600 600 600 NFT–2 NFT–2 NFT–2 NFT–2 W5, W12 ... ... G14, W6 24 25 26 27 28 29 ... ... ... ... ... ... 51 51 51 51 51 51 58 58 58 58 58 58 40 40 40 40 40 40 NP NP NP NP NP NP NP NP NP NP NP NP 600 600 600 600 600 600 NP NP NP NP NP NP NFT–2 NFT–2 NFT–2 NFT–2 NFT–2 NFT–2 ... ... G14, W6 ... ... W12 30 31 32 ... ... ... 51 51 51 58 58 58 40 40 40 NP NP NP NP NP NP 600 600 600 NP NP NP NFT–2 NFT–2 NFT–2 ... ... W12 33 34 35 36 37 38 ... ... ... ... ... ... 52 52 52 52 52 52 65 65 65 65 65 65 55 55 55 55 55 55 NP 600 600 600 600 NP NP 600 600 600 600 600 500 600 600 600 600 600 NP 600 600 600 600 600 NFT–1 NFT–1 NFT–1 NFT–1 NFT–1 NFT–1 G15, W1 ... ... G14, W6 ... W5, W12 39 40 41 ... ... ... 52 52 52 65 65 65 55 55 55 NP 600 600 600 600 600 600 600 600 600 600 600 NFT–1 NFT–1 NFT–1 ... ... G14, W6 42 43 44 ... ... ... 51 51 51 35 35 35 20 20 20 NP NP NP NP NP NP 600 600 600 NP NP NP NFT–3 NFT–3 NFT–3 ... ... ... 259 G4, G4, G4, G4, G8 G8 T17 G5, T16 G14, T16 G5, G14, T15 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding −20 Line to No. 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 28.6 28.6 24.3 24.3 34.2 34.2 ... ... ... ... ... ... 25.6 28.6 21.8 24.3 32.1 32.1 ... ... ... ... ... ... 23.1 28.0 19.6 23.8 28.5 28.5 ... ... ... ... ... ... 21.3 27.1 18.1 23.0 25.5 25.5 ... ... ... ... ... ... 20.1 26.4 17.1 22.5 23.4 23.4 ... ... ... ... ... ... 19.3 26.0 16.4 22.1 22.0 22.0 18.9 25.6 16.1 21.7 21.5 21.5 18.7 25.2 15.9 21.4 21.2 21.2 18.4 24.9 15.7 21.1 20.9 20.9 18.2 24.6 15.5 20.9 20.5 20.5 18.0 24.3 15.3 20.7 ... ... 17.8 24.1 15.2 20.5 ... ... 17.6 23.8 15.0 20.2 ... ... 7 8 9 10 10.0 10.0 8.5 10.0 9.3 9.3 7.9 9.3 8.3 8.3 7.0 8.3 7.4 7.4 6.3 7.4 6.6 6.6 5.6 6.6 6.0 6.0 5.1 6.0 5.4 5.5 4.7 5.5 4.7 4.7 4.1 4.7 4.2 4.2 3.6 4.2 3.8 3.8 3.2 3.8 3.5 3.5 3.0 3.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 10.0 10.0 10.0 8.5 9.3 9.3 9.3 7.9 8.3 8.3 8.3 7.0 7.4 7.4 7.4 6.3 6.6 6.6 6.6 5.6 6.0 6.0 6.0 5.1 5.5 5.5 5.5 4.7 4.7 4.7 4.7 4.1 4.2 4.2 4.2 3.6 3.8 3.8 3.8 3.2 3.5 3.5 3.5 3.0 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 19 14.3 14.3 14.3 12.1 14.3 13.1 13.7 13.7 11.7 13.7 11.8 12.4 12.4 10.6 12.4 10.7 11.3 11.3 9.6 11.3 9.7 10.3 10.3 8.8 10.3 8.9 9.5 9.5 8.1 9.5 8.1 8.8 8.8 7.5 8.8 7.4 8.2 8.2 7.0 8.2 6.8 7.6 7.6 6.5 7.6 ... 7.0 7.0 6.0 7.0 ... 6.5 6.5 5.5 6.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 14.3 14.3 14.3 12.1 13.7 13.7 13.7 11.7 12.4 12.4 12.4 10.6 11.3 11.3 11.3 9.6 10.3 10.3 10.3 8.8 9.5 9.5 9.5 8.1 8.8 8.8 8.8 7.5 8.2 8.2 8.2 7.0 7.6 7.6 7.6 6.5 7.0 7.0 7.0 6.0 6.5 6.5 6.5 5.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 28 29 16.6 16.6 14.1 16.6 16.6 16.6 15.9 15.9 13.5 15.9 15.9 15.9 14.4 14.4 12.3 14.4 14.4 14.4 13.1 13.1 11.2 13.1 13.1 13.1 12.0 12.0 10.2 12.0 12.0 12.0 11.1 11.1 9.4 11.1 11.1 11.1 10.2 10.2 8.7 10.2 10.2 10.2 9.5 9.5 8.1 9.5 9.5 9.5 8.8 8.8 7.5 8.8 8.8 8.8 8.2 8.2 6.9 8.2 8.2 8.2 7.6 7.6 6.4 7.6 7.6 7.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 16.6 16.6 16.6 15.9 15.9 15.9 14.4 14.4 14.4 13.1 13.1 13.1 12.0 12.0 12.0 11.1 11.1 11.1 10.2 10.2 10.2 9.5 9.5 9.5 8.8 8.8 8.8 8.2 8.2 8.2 7.6 7.6 7.6 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 36 37 38 18.6 18.6 18.6 15.8 18.6 18.6 17.5 17.5 17.5 14.9 17.5 17.5 15.8 15.8 15.8 13.4 15.8 15.8 14.2 14.2 14.2 12.1 14.2 14.2 12.8 12.8 12.8 10.8 12.8 12.8 11.5 11.5 11.5 9.7 11.5 11.5 10.3 10.3 10.3 8.8 10.3 10.3 9.3 9.3 9.3 7.9 9.3 9.3 8.5 8.5 8.5 7.2 8.5 8.5 ... 7.9 7.9 6.7 7.9 7.9 ... 7.4 7.4 6.3 7.4 7.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 18.6 18.6 15.8 17.5 17.5 14.9 15.8 15.8 13.4 14.2 14.2 12.1 12.8 12.8 10.8 11.5 11.5 9.7 10.3 10.3 8.8 9.3 9.3 7.9 8.5 8.5 7.2 7.9 7.9 6.7 7.4 7.4 6.3 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 42 43 44 10.0 10.0 10.0 9.3 9.3 9.3 8.3 8.3 8.3 7.4 7.4 7.4 6.6 6.6 6.6 6.0 6.0 6.0 5.4 5.4 5.4 4.7 4.7 4.7 4.2 4.2 4.2 3.8 3.8 3.8 3.5 3.5 3.5 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 260 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Maximum Allowable Stress, ksi (Multiply by 1000 to Obtain psi), for Metal Temperature, °F, Not Exceeding Line No. 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 17.5 23.6 14.8 20.0 ... ... 17.3 23.3 14.7 19.8 ... ... 17.1 21.2 14.5 18.0 ... ... 16.9 17.0 14.4 14.4 ... ... 13.6 13.6 11.6 11.6 ... ... 10.9 10.9 9.3 9.3 ... ... 8.8 8.8 7.5 7.5 ... ... 7.0 7.0 6.0 6.0 ... ... 5.6 5.6 4.8 4.8 ... ... 4.5 4.5 3.8 3.8 ... ... 3.6 3.6 3.1 3.1 ... ... 2.7 2.7 2.3 2.3 ... ... 2.1 2.1 1.8 1.8 ... ... 1.6 1.6 1.4 1.4 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7 8 9 10 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 11 12 13 14 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 15 16 17 18 19 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 20 21 22 23 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 25 26 27 28 29 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 31 32 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 33 34 35 36 37 38 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 39 40 41 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 42 43 44 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 261 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Nominal Composition Product Form Spec. No. Type/Grade Alloy Desig./UNS No. Class/Condition/ Temper Ti–Pd Ti–Pd Ti–Pd Ti–Pd Ti–Pd Ti–Pd Plate, sheet, strip Smls. tube Wld. tube Bar, billet Smls. fittings Wld. fittings SB–265 SB–338 SB–338 SB–348 SB–363 SB–363 7 7 7 7 WPT7 WPT7W R52400 R52400 R52400 R52400 R52400 R52400 Annealed Annealed Annealed Annealed Annealed Annealed 7 8 9 10 Ti–Pd Ti–Pd Ti–Pd Ti–Pd Castings Forgings Smls. pipe Wld. pipe SB–367 SB–381 SB–861 SB–862 C–7 F–7 7 7 R52400 R52400 R52400 R52400 Annealed Annealed Annealed Annealed 11 12 13 14 15 16 Ti–0.15Pd Ti–0.15Pd Ti–0.15Pd Ti–0.15Pd Ti–0.15Pd Ti–0.15Pd Plate, sheet, strip Smls. tube Wld. tube Bar, billet Smls. fittings Wld. fittings SB–265 SB–338 SB–338 SB–348 SB–363 SB–363 7H 7H 7H 7H WPT7H WPT7HW R52400 R52400 R52400 R52400 R52400 R52400 Annealed Annealed Annealed Annealed Annealed Annealed 17 18 19 Ti–0.15Pd Ti–0.15Pd Ti–0.15Pd Forgings Smls. pipe Wld. pipe SB–381 SB–861 SB–862 F–7H 7H 7H R52400 R52400 R52400 Annealed Annealed Annealed 20 21 22 23 24 Ti–Pd Ti–Pd Ti–Pd Ti–Pd Ti–Pd Plate, sheet, strip Smls. tube Wld. tube Bar, billet Forgings SB–265 SB–338 SB–338 SB–348 SB–381 16 16 16 16 F–16 R52402 R52402 R52402 R52402 R52402 Annealed Annealed Annealed Annealed Annealed 25 26 27 28 29 30 Ti–0.05Pd Ti–0.05Pd Ti–0.05Pd Ti–0.05Pd Ti–0.05Pd Ti–0.05Pd Plate, sheet, strip Smls. tube Wld. tube Bar, billet Smls. fittings Wld. fittings SB–265 SB–338 SB–338 SB–348 SB–363 SB–363 16H 16H 16H 16H WPT16H WPT16HW R52402 R52402 R52402 R52402 R52402 R52402 Annealed Annealed Annealed Annealed Annealed Annealed 31 32 33 Ti–0.05Pd Ti–0.05Pd Ti–0.05Pd Forgings Smls. pipe Wld. pipe SB–381 SB–861 SB–862 F–16H 16H 16H R52402 R52402 R52402 Annealed Annealed Annealed 34 35 36 37 38 39 Ti–Ru Ti–Ru Ti–Ru Ti–Ru Ti–Ru Ti–Ru Plate, sheet, strip Smls. tube Wld. tube Bar, billet Smls. fittings Wld. fittings SB–265 SB–338 SB–338 SB–348 SB–363 SB–363 26 26 26 26 WPT26 WPT26W R52404 R52404 R52404 R52404 R52404 R52404 Annealed Annealed Annealed Annealed Annealed Annealed 40 41 42 Ti–Ru Ti–Ru Ti–Ru Forgings Smls. pipe Wld. pipe SB–381 SB–861 SB–862 F–26 26 26 R52404 R52404 R52404 Annealed Annealed Annealed 262 This copy downloaded on 2015-07-13 07:19:51 -0500 by authorized user logan ahlstrom. 1 2 3 4 5 6 Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com). ASME BPVC.II.D.C-2015 No fu Table 1B (Cont'd) Section I; Section III, Classes 2 and 3;* Section VIII, Division 1; and Section XII Maximum Allowable Stress Values S for Nonferrous Materials (*See Maximum Temperature Limits for Restrictions on Class) Line No. Size/ Thickness, in. P-No. Min. Tensile Strength, ksi Min. Yield Strength, ksi Applicability and Max. Temperature Limits (NP = Not Permitted) (SPT = Supports Only) I III VIII-1 XII External Pressure Chart No. Notes ... ... ... ... ... ... 51 51 51 51 51 51 50 50 50 50 50 50 40 40 40 40 40 40 NP NP NP NP NP NP 600 600 600 600 NP NP 600 600 600 600 600 600 600 600 600 600 600 600 NFT–2 NFT–2 NFT–2 NFT–2 NFT–2 NFT–2 ... ... G14, W6 ... ... G14 7 8 9 10 ... ... ... ... 51 51 51 51 50 50 50 50 40 40 40 40 NP NP NP NP NP NP 600 600 500 600 600 600 500 600 600 600 NFT–2 NFT–2 NFT–2 NFT–2 G15, W1 ... ... G14, W6 11 12 13 14 15 16 ... ... ... ... ... ... 51 51 51 51 51 51 58 58 58 58 58 58 40 40 40 40 40 40 NP NP NP NP NP NP NP NP NP NP NP NP 600 600 600 600 600 600 NP NP NP NP NP NP NFT–2 NFT–2 NFT–2 NFT–2 NFT–2 NFT–2 ... ... G14, W6 ... ... W12 17 18 19 ... ... ... 51 51 51 58 58 58 40 40 40 NP NP NP NP NP NP 600 600 600 NP NP NP NFT–2 NFT–2 NFT–2 ... ... W12 20 21 22 23 24 ... ... ... ... ... 51 51 51 51 51 50 50 50 50 50 40 40 40 40 40 NP NP NP NP NP NP NP NP NP NP 600 600 600 600 600 600 600 600 600 600 NFT–2 NFT–2 NFT–2 NFT–2 NFT–2 ... ... G14, W6 ... ... 25 26 27 28 29 30 ... ... ... ... ... ... 51 51 51 51 51 51 58 58 58 58 58 58 40 40 40 40 40 40 NP NP NP NP NP NP NP NP NP NP NP NP 600 600 600 600 600 600