PRODUCT DATA SHEET BARACOR® 95 Corrosion Inhibitor Product Description BARACOR® 95 corrosion inhibitor is amine-based and water soluble. It is effective in drilling fluids, solids-free brines and packer fluids. It can be used in a range of mono- and divalent brines. BARACOR 95 provides protection for drillpipe, casing and other tubulars in drilling and completion systems. Corrosion protection can be maintained at temperatures up to 375ºF (190ºC). Applications/Functions Water-based drilling fluids Completion fluids Brine packer fluids Advantages Easily dispersed in water Effective at low concentrations High temperature corrosion control Granted the best possible environmental rating Typical Properties Appearance: Specific gravity: Flash point: pH (1% aqueous): Clear liquid 1.02 205ºF (96ºC) 12 Recommended Treatment Corrosion can be controlled and limited with the addition of up to 0.4% v/v BARACOR 95. Additions to divalent brines should be limited in order to control precipitation. BARACOR 95 should be used as part of a corrosion control program including biocide and appropriate scavengers. Packaging BARACOR 95 corrosion inhibitor is packaged in 55 gallon (208 l) drums and 5 gallon (19 l) cans. BARACOR 95 is a registered trademark of Halliburton © 2016 Halliburton. All rights reserved. Because the conditions of use of this product are beyond the seller's control, the product is sold without warranty either express or implied and upon condition that purchaser make its own test to determine the suitability f or purchaser's application. Purchaser assumes all risk of use and handling of this product. This product will be replaced if defective in manufacture or packaging or if damaged. Except for su ch replacement, seller is not liable for any damages caused by this product or its use. The statements and recommendations made herein are believed to be accurate. No guarantee of their accuracy is made, however. www.halliburton.com