Lighting: Fluorescent & LED Tube Lighting Fixture,
DFP-S Series (Short end cap)
Flameproof and Dust protection by enclosure
Zone 1 & 2 _ 21 & 22
6SHFL¿FDWLRQ
Body and cover
Technical Data
: Marine grade copper-free
aluminium alloy with polyester
powder coated, RAL 7032 (grey)
Glass tube
: Borosilicate glass (4J impact)
Re ector
: Sheet steel with polyester powder
Protective guard
Sealing gasket
coated, RAL 9016 (white)
: Stainless steel
: Silicone
Hazardous Area
Gas
Dust
Zones
1&2
21 & 22
II 2G
Equipment Group/Category
Ex db IIC T6 Gb
Symbol of Protection
II 2D
Ex tb IIIC T85oC Db IP66
Certificate
TÜV CY 17 ATEX 0205887 X
Conformity to Standards
EN 60079-0:2012+A11:2013, EN 60079-1:2014,
EN 60079-31:2014
Ambient Temperature
-20oC to +55oC
Index of Protection
IP66
Entries
2- M20x1.5, 2- M25x1.5 or 2- Ø3/4” NPT (1-stopping plug)
Mounting
Ceiling, Pendant, Bracket, Stanchion or Pole mount
Connection
L, N and E ; for 1-4mm.2 cable
Rated Voltage
110-240V.ac 50/60Hz. (P.F. 0.98)
F
Polar Luminous Intensity Distribution
Complete photometrics, please contact us.
F8/43
Visit our website at www.alloyindustry.com
or contact us at +66 (0) 2434 3688 © June 2020
Lighting: Fluorescent & LED Tube Lighting Fixture,
DFP-S Series (Short end cap)
Flameproof and Dust protection by enclosure
Zone 1 & 2 _ 21 & 22
Catalogue Number Logic
DFP Series
Lamp Watt
(see ordering
requirement
table below)
Type
L4 Fluorescent
lamp
LED LED tube
D
LED Driver
D with driver
(25W LED tube)
-
S
-
Accessories
Body
G Protective guard
S Short
R External reflector
end cap
E Emergency power unit
(ATEX certificate under preparation)
Entries
M1 M20x1.5
M2 M25x1.5
N2 3/4” NPT
Mounting
C
C1
C2
P1
P2
B
Ceiling (standard)
Ceiling (for pipe), Fixed
Ceiling (for pipe), Swing
Pendant (for chain)
Pendant (for pipe)
Bracket
Ordering Requirements and Dimension
Cat. No.
T8 Fluorescent Lamp
DFP-118L4- -SDFP-218L4- -SDFP-136L4- -SDFP-236L4- -ST5 Fluorescent Lamp
DFP-114L4- -SDFP-214L4- -SDFP-128L4- -SDFP-228L4- -SLED Tube
DFP-105LED- -SDFP-205LED- -SDFP-106LED- -SDFP-206LED- -SDFP-108LED- -SDFP-208LED- -SDFP-109LED- -SDFP-209LED- -SDFP-114LED- -SDFP-214LED- -SDFP-115LED- -SDFP-215LED- -SDFP-116LED- -SDFP-216LED- -SDFP-118LED- -SDFP-218LED- -SDFP-120LED- -SDFP-220LED- -SDFP-122LED- -SDFP-222LED- -SDFP-125LED-D -SDFP-225LED-D -S-
Lamp
Watt
Voltage
Ballast
Temp. Class
(for zone 1 & 2)
Max. Surface Temp.*
Volume
(for zone 21 & 22)
(dm3)
Ta 55oC
Ta 40oC Ta 55oC Ta 40oC
Dimension in mm.
a
b
3.95
750
645
7.02
1365
1258
3.95
750
645
7.02
1365
1258
3.95
750
645
1x 18W.
2x 18W.
1x 36W.
2x 36W.
220-240V.ac Electronic
50/60Hz.
1x 14W.
2x 14W.
1x 28W.
2x 28W.
220-240V.ac Electronic
50/60Hz.
1x 5W.
2x 5W.
1x 6W.
2x 6W.
1x 8W.
2x 8W.
1x 9W.
2x 9W.
1x 14W.
2x 14W.
1x 15W.
2x 15W.
1x 16W.
2x 16W.
1x 18W.
2x 18W.
1x 20W.
2x 20W.
1x 22W.
2x 22W.
1x 25W.
2x 25W.
110-240V.ac
50/60Hz.
¯
T6
110-240V.ac
50/60Hz.
¯
T6
T6
T85°C
T85°C
7.02
1365
1258
T6
T6
T85°C
T85°C
7.02
1365
1258
110-240V.ac LED Driver
50/60Hz.
T6
T6
T6
T6
T6
T85°C
T85°C
T85°C
T85°C
T85°C
T85°C
Approx.
Weight
(kgs.)
6.80
6.95
10.30
10.60
6.80
6.95
10.30
10.60
4.80
5.00
4.80
5.00
4.80
5.00
4.80
5.00
9.30
9.60
9.30
9.60
9.30
9.60
9.30
9.60
9.30
9.60
9.30
9.60
10.60
11.00
F
Lighting source; cool white (6500K) are standard and/or warm white (3000K), please specify.
Remark * : The maximum surface temperatures are specified for dust free condition. The dust layer which may cover around the lighting fixture will cause to higher surface temperature.
Visit our website at www.alloyindustry.com
or contact us at +66 (0) 2434 3688 © June 2020
F9/43
Lighting: Fluorescent & LED Tube Lighting Fixture,
DFP-S Series (Short end cap)
Flameproof and Dust protection by enclosure
Zone 1 & 2 _ 21 & 22
Wiring Diagram
LED Tube without driver
Electronic ballast for fluorescent lamp;
1x 14W., 1x 28W., 1x 18W. and 1x 36W.
2x Lamp
1x Lamp
110-240V.ac
50/60Hz.
110-240V.ac
50/60Hz.
220-240V.ac
50/60Hz.
LED Tube with driver (25W. only)
1x 25W.
Electronic ballast for fluorescent lamp;
2x 14W., 2x 28W., 2x 18W. and 2x 36W.
110-240V.ac
50/60Hz.
2x 25W.
220-240V.ac
50/60Hz.
110-240V.ac
50/60Hz.
F
Installation Information
Pole mount
Ceiling mount (standard)
Ceiling mount (for pipe)
Pendant mount (for pipe)
Bracket mount (or wall mount)
Pendant mount (for chain)
F10/43
Visit our website at www.alloyindustry.com
or contact us at +66 (0) 2434 3688 © June 2020