Create adaptive component – Revit
Family file name: SHP_BCS_SEGMANT
Adaptive Parameters :
1.
2.
3.
4.
5.
Wing thickness – default 25 cm
Bottom corner width - default 215 cm
Bottom center width - default 270 cm
Total element height – default 300 cm
Lower inner corner angle - default 10 degrees
6.
Uper inner corner angle - default 13 degrees
7.
wing angle - default 11 degrees
8.
9.
10.
11.
Left Wing width - default 25 cm
Right Wing width - default 25 cm
Upper center thickness - default 30 cm
Bottom center thickness - default 30 cm
12. flank thickness - default 50 cm
13. Offset Axis Horizontal – default 0 cm (see example)
14. Offset Axis Vertical – default 0 cm (see example)
** 01 blue – formula [(number 2) x2 + (number 3) + (the addition of the angle)]
** The angle of the sides of the element is fixed - 125 degrees
example