1
Department of Mechanical, Industrial & Aerospace Engineering
Mechanical Engineering Drawing
(MIAE 211)
Assignment 7
Prof.IonStiharu
1
Dr.HanyGomaa
This work is a contribution of the
MIAE 211 Course Instructors
G.R. Bertoline et al., “Technical graphics communication 4th Ed.”, McGraw-Hill.
G.R. Bertoline et al., “Fundamentals of graphics communication 7th Ed.”, McGraw-Hill.
Prof.IonStiharu
2
Dr.HanyGomaa
Q1 (a). Find the slope (dip) and strike of the given triangle abc
Hint: Each grid is 0.25" or 6 mm.
H
F
3
Dr.HanyGomaa
Q1(b). Find the area of the given triangle MNO
Hint: Each grid is 0.25" or 6 mm.
G.R. Bertoline et al., “Technical graphics communication 4th Ed.”, McGraw-Hill.
G.R. Bertoline et al., “Fundamentals of graphics communication 7th Ed.”, McGraw-Hill.
Prof. IonStiharu
4
Dr.HanyGomaa
Q2. For the given figure:
a) Draw the center point of the circle passing through the three points a, b, and c
b) Find the radius of the circle passing through the three points a, b, and c
Hint: Each grid is 0.25" or 6 mm.
5
Q3. Using the Edge View (EV) method, find the angle that line PQ makes
with triangle abc
Hint: Each grid is 0.25" or 6 mm.
Prof. IonStiharu
6
Dr.HanyGomaa
Q4. Using the Edge View (EV) method, find the shortest distance between
lines ab and cd.
Hint: Each grid is 0.25" or 6 mm.
Prof. IonStiharu
7
Dr.HanyGomaa