AMOS Commands
1. Verify Health Check
>lt all
>acc 0 startHealthCheck
>get 0 healthCheckResult
ResultCode: Refer Library Explorer/Alex for more information.
2. To check Alarm and Hardware Status
>alt
3. To check Alarm log history
>lga
>lga | grep –s20140501 –e 20140520 - alarm log specific time
- check log restart
C – Critical, M – Major, m – minor
* Clock calibration (clearance alarm)
4. Check License
>license key
>license lkf
>license server
5. Check UE attach to cell (eNodeB)
>ue print -admitted
6. Check Number of User (NodeB)
>get radio no
*Or can view using Node Status Analyzer
7. Check user (In RNC)
>lt all
>cedr | grep <node B cell id>
eg: SDRN12>cedr | grep RW10263_2_3
8. View status Iub (In RNC)
>st iub
- to view detail
>get <proxy>
9. Check Relation (neighboring cell) (eNodeB)
>pr relation
>pr EUtranCellRelation
10. Verify Hardware Status
>invh
11. Verify all Plugin Units
>st plugin
>get <proxy> - to view detail
12. Verify Gigabit Ethernet Link Connection Status
>st GigaBitEthernet / st giga
>get <proxy> - to view detail
13. To check IP Configuration in NodeB
>stip
( password: rbs)
14. To check Gigabit speed and duplex setting
>lget giga actualSpeedDuplex
>st giga
(1000M FullDuplex)
15. Check S1 interface connection (eNodeB)
>st mme
16. Check Sector status
>st sector
>get <proxy> - to view detail
17. Check eUtranCell status (eNodeB)
>st utrancell @ st cell (NodeB)
>get <proxy> - to view detail
18. Traffic Performance
>pmr
19. To check ENodeB product detail
>get 0
>get 1
20. To check NTP Frequency Synchronization (Clocking status)
>get Synchronization clock
>sts
>st IpSyncRef
*SYSTEM CLOCK: LOCK_MODE
21. Check DUS/RRUS HWstatus and VSWR
>cabx
( password: rbs)
Note: VSWR Value must below <1.5
22. Check Temperature of RRUS
>lh ru fui get temp
Normal operating temp. 40 to +50 C
23. Check RRUS for any faults (eNodeB)
>lhsh BXP_0_1 fm getfaults (Cell 1)
>lhsh BXP_1_1 fm getfaults (Cell 2)
>lhsh BXP_2_1 fm getfaults (Cell 3)
24. Check External Alarm port status and alarm slogan
>lget alarmport slogan | severity
>lst hwunit=sup-1,alarmport=[1-9]$
>lget hwunit=sup-1,alarmport=[1-9]$ alarm slogan
>get <pxoxy>
- to display alarm details
>set <proxy> alarm slogan ‘cps fail’
- to set alarm text
>bl <proxy>
- to block alarm port
>deb <proxy>
- to deblock alarm port
eg: proxy =301
bl 301 , deb 301
25. To check and create system backup
>cvls
>cvms <cvname> <username> <comment>
>cvls
26. To Lock/Unlock MME (eNodeB)
>st mme
>bl mme
>st mme
>deb mme
>st mme
27. To Lock/Unlock eUtranCell (eNodeB)
>st fdd
>bl fdd
>st fdd
>deb fdd
>st fdd
28. To Lock/Unlock neighbouring eNodeB
>st termpoint
>bl termpoint
>st termpoint
>deb termpoint
>st termpoint
29. To check or reconfigure power of eNodeB
>get . configuredOutputPower
>set . configuredOutputPower 40
>bl fdd
>deb fdd
>get . maximumTransmissionPower
(40Watt for macro site)
30. To Lock/Unlock RRU (eNodeB) @ RU (NodeB)
>st rru / ru
>bl rru
>deb rru
>st rru
31. To Lock/Unlock DU
>st du
>bl du
>del du
32. To Restart RRU
>st rru
eg: proxy =320
>acl 320
>acc 320 restartunit
>acc 320 0 manualrestart
33. To Restart eNodeB
>acc 0 manualrestart
34. To check how long the site has been up and running
>uptime
35. To check eNodeB/NodeB restart logs
>llog
36. Node Performance
>getstat
37. Fetching and processing of node logs
>lgd - downtime log./History of node outages.
>lgx
>lgs - History of node/board/program restarts.
>lgo - History of MO write commands (set/action/create/delete)
38. To perform S1 link ping test
>facc ipaccesshostet ping <dst ip>
eg: facc ipaccesshostet ping 10.223.32.1
39. To perform continue ping test from traffic interface
>iacrh ping –dst <destination> ip> -src <source ip> -n <count>
eg: iacrh ping –dst 10.223.32.1 –src 10.157.80.185 –n 10
40. To perform trace route from traffic interface
>iacrh traceroute –dst <ip> -src <ip>
eg: iarch traceroute –dst 10.223.32.1 –src 10.157.66.1
(password: rbs)