8.6.4 Configure Smart Devices
Lab Report
Time Spent: 04:01
Score: 3/3 (100%) Pass
Passing Score: 3/3 (100%)
TASK SUMMARY
Required Actions



Configure the devices in the Lobby
Hide Details

Install the Lobby camera

Install and configure a smart light switch

Install and configure smart locks

Install a smart assistant
Install and configure the thermostat in the Main Hall

Install the Smart thermostat in the Main Hall

Set the temperature of the thermostat to 72
Configure the smart devices in Office 1

Install the Office 1 camera

Install and configure a smart outlet
Hide Details
EXPLANATION
While completing this lab, use the following information:
Smart device and pairing codes:
Room
Lobby
Main Hall
Office 1
Smart Device
Pairing Code
Smart Light Switch
6718471173
Smart Lock
6339057209
Smart Assistant
4377043770
Lobby Camera
1533705506
Smart Thermostat
1753016434
Smart Outlet
1234567890
Office Camera
1533705434
Hide Details
Complete this lab as follows:
1. In the TestOut Home app, create rooms for the devices.
a. From the iPad, select TestOut Home.
b. In the left corner, select the hamburger menu icon (3-lines) and then select New Room.
c. In the Room Name field, enter the name of the room.
d. Select Save.
e. Repeat steps 1b–1d to create additional rooms.
2. Configure the devices in the Lobby.
a. Select the arrow (>) on the right side of the screen to move to the Lobby room you created.
b. From the Lobby page, in the right corner, select + to add a smart device to the room.
c. In the Pairing Code field, enter the pairing code for the device you wish to add.
d. Select the smart device.
e. Select Add Device.
f. Repeat steps 2b–2e until you've added all the devices for that room.
g. Select Smart Camera to verify that the camera is working.
h. Select Done.
i. Select Smart Light Switch to turn the light on.
j. Select Smart Lock Switch to lock the doors.
3. Configure the Main Hall smart devices.
a. Select the arrow (>) on the right side of the screen to move to the Main Hall room you created.
b. From the Main Hall page, in the right corner, select + to add a smart device to the room.
c. In the Pairing Code field, enter 1753016434 for the Smart Thermostat device.
d. Select the Smart Thermostat.
e. Select Add Device.
f. Select Smart Thermostat Temperature to modify the temperature.
g. Under Cooling, select Down until the temperature reaches 72 degrees.
h. Select Done.
4. Configure the Office 1 smart devices.
a. Select the arrow (>) on the right side of the screen to move to the Office 1 room you created.
b. From the Office 1 page, in the right corner, select + to add a smart device to the room.
c. In the Pairing Code field, enter the pairing code for the device you wish to add.
d. Select the smart device.
e. Select Add Device.
f. Repeat steps 4b–4e until you've added all the devices for that room.
g. Select Smart Camera to verify that the camera is working.
h. Select Done.
i. Select the Smart Outlet Switch to set it to ON.
Copyright © 2022 TestOut Corporation All rights reserved.