Step 1 Configure DEMU Board
1.Right click on one site and choose
configure site board attribute .
2.Double click on DEMU board,and choose
config site board attribute .
For common alarm switch valid level
Configuration value:0 meas nomally close
1 meas nomally open
In our project ,external alarms all set to
nomally close,so need to change the
corresponding alarm switch value to 0
Step 2 Configure Alarm Attribute
• Open MML client and choose patch
commands.
• Paste commands and go
• Notice:Step 2 is used for define alarms.For
phase 1 sites,step 2 has already been
done.So step 2 only needs to be done for
phase 2 sites.
• And you can find the commands in “Patch
commands for BTS3012 external
alarms.xls”,you only need to change the
site name.