SECTION 077100
ROOF SPECIALTIES
SECTION 077100 - ROOF SPECIALTIES
1.1
WARRANTY
A.
Roofing-System Warranty: Roof specialties included in warranty provisions of roofing Section.
B.
Special Warranty on Painted Finishes: 10 years.
1.2
PRODUCTS
A.
Copings: [Zinc-coated (galvanized) steel] [Formed aluminum] [Extruded aluminum]
[Stainless steel] [Copper].
B.
Roof-Edge Specialties:
1.
2.
3.
C.
Roof-Edge Drainage Systems:
1.
2.
3.
4.
5.
D.
Canted Roof-Edge [Fascia] [and] [Gravel Stop] : [Zinc-coated (galvanized) steel]
[Formed aluminum] [Extruded aluminum] [Stainless steel] [Copper].
Roof-Edge Fascia: [Zinc-coated (galvanized) steel] [Formed aluminum].
One-Piece Gravel Stops: [Zinc-coated (galvanized) steel] [Formed aluminum]
[Extruded aluminum] [Stainless steel] [Copper].
Gutters: [Zinc-coated (galvanized) steel] [Formed aluminum] [Copper].
Downspouts: [Zinc-coated (galvanized) steel] [Formed aluminum] [Extruded
aluminum] [Copper].
Parapet Scuppers: [Zinc-coated (galvanized) steel] [Formed aluminum] [Stainless
steel] [Copper].
Conductor Heads: [Zinc-coated (galvanized) steel] [Formed aluminum] [Stainless
steel] [Copper].
Splash Pans: [Zinc-coated (galvanized) steel] [Formed aluminum] [Stainless steel]
[Copper].
Reglets and Counterflashings:
1.
2.
Reglets [, Surface Mounted] [, Embedded] : [Zinc-coated (galvanized) steel] [Formed
aluminum] [Stainless steel] [Copper].
Counterflashings: [Zinc-coated (galvanized) steel] [Formed aluminum] [Stainless
steel] [Copper].
E.
Splash Pans: [Zinc-coated (galvanized) steel] [Formed aluminum] [Stainless steel]
[Copper].
F.
Finishes:
1.
Zinc-Coated
(Galvanized)
Steel:
[Two-coat
fluoropolymer]
[Three-coat
fluoropolymer] [Two-coat mica fluoropolymer] [Three-coat metallic fluoropolymer]
<Insert finish>.
077100 - 1
Copyright © 2022 by the American Institute of Architects. Warning: This AIA MasterSpec-based document is protected by U.S. Copyright Law and International
Treaties. It was created by "University of North Dakota - Facilities" for "Nursing roof". A valid, current MasterSpec license is required for editing and use of this
document for any other project.(21452)
SECTION 077100
ROOF SPECIALTIES
2.
3.
4.
Aluminum: [Mill] [Two-coat fluoropolymer] [Three-coat fluoropolymer] [Two-coat
mica fluoropolymer] [Three-coat metallic fluoropolymer] [Clear anodic] [Color
anodic] <Insert finish>.
Stainless Steel: [ASTM A480/A480M No. 2B] [ASTM A480/A480M No. 3]
[ASTM A480/A480M No. 4].
Copper: [Non-patinated, mill] [Pre-patinated].
END OF SECTION 077100
077100 - 2
Copyright © 2022 by the American Institute of Architects. Warning: This AIA MasterSpec-based document is protected by U.S. Copyright Law and International
Treaties. It was created by "University of North Dakota - Facilities" for "Nursing roof". A valid, current MasterSpec license is required for editing and use of this
document for any other project.(21452)