BASEBAND5212&5216 INTEGRATION Pre-requisite Category Netconf (XML) Script MOS Script Item Format RbsSummary File Netconf (xml) SiteBasic Template Netconf (xml) SiteEquipment Template Netconf (xml) TN Template Netconf (xml) RN Template Netconf (xml) Feature Activation Script Moshell (.mos) Post Integration Script Moshell (.mos) Cell Relation Script Moshell (.mos) UP Upgrade Package (UP) ZIP LKF License Key File (LKF) XML PC Client PC Cable Ethernet Cable Comment Baseband LMT - PC Pre-requisite › Baseband5216 should be installed in RBS6601 and should be power on. › Scripts and UP package prepared and stored in Client PC › SFTP Server installed in Client PC › Cygwin and moshell for latest version Client PC Setup (1) › Client PC connects to Baseband5216 LMT port › Set Client PC IP address - IP Address : 169.254.2.1 - Subnet mask : 255.255.0.0 - Default gateway : 169.254.2.2 Client PC Setup (2) › Stop Symantec Management › Stop firewall Right click the icon of Symantec and waiting until ‘Disabled Symantec Endpoint Protection’ available to click Client PC Setup (3) › Client PC SFTP Server Setting - IP Address : 169.254.2.1 - Username : ftp - Password : ftp › Save integration files (XML, UP, MOS) to SFTP HOME Directory › Turn on SFTP Server Semi auto-integration(pre-check) › Check following from “xxx_RbsSummaryFile.xml” XML script Semi auto-integration › Auto-Integration Tool Page Recommand explorer: google chrome - Tool Web Page : https://169.254.2.2:8080 (Before Integration) https://169.254.2.2/autointegration.html › https://169.254.2.2 (After Integration) • Host : 169.254.2.1 • Username : ftp • Password : ftp • Site Installation File : <File_Name> Semi auto-integration › Click ‘Downloading Files’ (finish within 10 mins) SW Package Download success (Finished) Prepare Filesystem success (Finished) Unpack and Install SW success (Successful) Semi auto-integration › After UP Installation, shows ‘Download Completed’ ‘Integrate’ button is activated and click it to integrate Semi auto-integration › After press “Integrate” button Node will Restart and start integrate Configuration File › In case error happens during integration, integration should be stopped and board will restore to factory setting. ESI log could be collected for integration failure. › If integration finishes with no error no progress message in AutoIntegration Log › Wait until TN port LED is ON and access node with moshell to run scripts. Semi auto-Integration • After Auto-Integration finishes, logon with moshell. Need to put in “Username/Password” after “lt all” Maintenance User Id/Password: “rbs/rbs” Type rbs/rbs Run TN/RN Script • Open an Terminal and run following TN/RN script running commands • File path should be put in correctly. ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p 830 rbs@169.254.2.2 –s <TN XML Script File Name> ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p 830 rbs@169.254.2.2 –s <RN XML Script File Name> • Command Example ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p 830 rbs@169.254.2.2 -s netconf < 3_eNB12_TN_netconfv2.xml ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p 830 rbs@169.254.2.2 -s netconf < 4_eNB12_RBS6601_RN_netconfv2.xml Contact DT responsible in case error happens with script running. Run Post Integration Script • Logon with moshell and run Post Integration Script • Run script with following command run <script_name> • Run script example run 5_featureActivation.mos run 6_PostIntegration.mos run 7_eutranfreq.mos • After script running, “lt all” to load new configuration and save CV cvmk <cv_name> or acc BrM=1,BrmBackupManager=1 createBackup cvmk <cv_name> or acc BrM=1,BrmBackupManager=1 createBackup Post-Check • After save CV, Node Cold Restart acc FieldReplaceableUnit=1 restartUnit • After node is up, check following with moshell - Unlock TermPointToMME, EUtranCellFDD MME, EUtranCellFDD, Sector, SectorCarrier, Radio Unit Status “inv” to check License Status Node configuration parameter and System Constant Status Alarm Status Save CV Command list for baseband ####### General ######## G1 cvls st cell st ru lh ru lmclist vols get Subrack=1,Slot=1 productData al pst cabx hget ^EUtranCellFDD CellIdGroup|SubCellId get . earfcn G2 cvls st cell st ru lh ru lmclist /sysm/discspace space must be below 80%, otherwise remove logs and UPs ( use /sysm/discspace –c. But be aware that you then remove all PMDs. Best is to remove PMDs as soon as you have disk full alarm. ) get Equipment=1,FieldReplaceableUnit=1 productData al pst command is currently not supported on COM nodes hget ^EUtranCellFDD CellIdGroup|SubCellId get . earfcn Command list for baseband ####### SCTP ###### G1 G2 get . initialAdRecWin get . numberOfAssociations get . initARWnd sctp -config | grep -i "SCTP_SYS_PAR_NUMBER_OF_ASSOCS" ####### SC ######### G1 G2 fget NodeManagementFunction=1,SystemConstants=1 systConstants sysconread ####### sCell ####### G1 get . scellc 1 G2 get . scellc 1 ####### Feature License ######## G1 inv G2 inv
