Traction Modifying Devices Eaton's reputation for providing world class traction solutions is legendary. Our comprehensive portfolio of traction modifying devices provides drivers with confidence, control and safety in virtually any traction situation. Global facilities are strategically located to provide our customers with flexible manufacturing and engineering services. Limited Slip Differential Clutch style unit employs Pyrolitic carbon fiber clutch packs to allow for chatter-free transfer of power. Prevents wheel slip before it can get started. Rebuildable design. Used by performance vehicles. MLocker® 100% full locking differential is proven with millions of units in service worldwide. Automatically delivers traction on a variety of surfaces including wet roads, icy conditions, gravel, mud and dirt. Used primarily in light duty trucks. EGerodisc/ELSD™ Hydraulic differential can be adjusted from zero bias to 100% axle lock. Seamless engagement requires no driver input. Utilized in front and rear wheel drive for Jeep, utility, and military applications. NoSPIN® / Detroit Locker® Full positive locking differential automatically unlocks to allow wheel speed differentiation. Provides 100% locking action even with one wheel off the ground. Available in a wide range of car, truck, construction, agricultural and performance vehicles. ELocker™ Selectable traction for offhighway. Provides 100% axle lock at the touch of a button. Enhanced towing and off-road performance. Used in front and rear wheel drive applications. Truetrac™ Helical gear differential automatically biases torque to ensure stability and increase traction. Used in light and medium duty trucks specifically selected for utility and towing. Available for front and rear applications. Gearless® Provides a fully locked axle that unlocks automatically when needed. Eliminates wheel spin-out and improves handling. Used in a variety of small utility vehicle applications. Suretrac™ Heavy duty differential responds instantly to torque feedback at any speed. Reduces shock loads that can damage the drive train. Used in military and commercial axle applications for enhanced traction control in rugged and adverse conditions. Traction Modifying Devices Eaton's testing and validation facilities are unmatched. A wide variety of specially equipped test cells are used to prove both product and system quality. In addition to the lab testing the Marshall, MI Proving Ground has 600 acres of outdoor test tracks and obstacles to prove products in a real world environment. Product Testing • Dynamic Case Fatigue • Differential Performance • Engagement Durability • Coil Bushing Durability • Engagement Function • Differential Performance • Gear Impact • High Angle Rotary Fatigue • Friction Disk Tester • Differential Audit Tester • Performance Products Dynamometer (PPD) • High Speed Dynamometer • Gear Fatigue • Noise Bench • LSD Bias Tester • Pressure Bench • Valve Flow Bench • Oven / Accumulator Tester • Axle Calibration Fixture • Friction Disc Break-in Marshall Proving Ground • Located on 600 Acres • Test Vehicle Fleet • 2.6 Km Oval Track • Rally Course • 20% Split Mu Grade • Sand Pit • Twist Ditch • 45% & 60% Grades • Log Walk • Rock Crawl • Swamp Course • Mount Eaton (8% & 15% Grades) Marshall, Michigan, USA NORTH AMERICA Southfield, MI, United States Tel: +1-248-226-6200 CHINA Shanghai, China Tel: +86-21-58917006-262 NORTHERN EUROPE Rastatt, Germany Tel: +49-7222-159-980 SOUTH AMERICA Sao Jose dos Campos, Brazil Tel: +55-12-3934-0783 JAPAN Tokyo, Japan Tel: +81-3-3746-3141 SOUTHERN EUROPE Turin, Italy Tel: +39-011-2208111 INDIA Pune, Maharashtra, India Tel: +91-20-30611111 KOREA Pyungtek-si, Korea Tel: +82-31-610-7455 www.eaton.com