New York City Housing Preservation and Development
Master Guide Specification for Rehabilitation Projects
July 2014
SECTION 224100 - RESIDENTIAL PLUMBING FIXTURES
PART 1 - GENERAL
1.1
SUMMARY
A.
Section Includes:
1.
2.
3.
4.
5.
6.
7.
8.
Bathtubs.
Faucets.
Lavatories.
Kitchen sinks.
Water closets.
Toilet seats.
Supply fittings.
Waste fittings.
B.
Enterprise Green Communities Criteria
1.
Mandatory Requirements
a.
Criteria 6.2: Low/No VOC Adhesives and Sealants
b.
Criteria 4.2: Advanced Water-Conserving Fixtures
C.
Related Sections:
1.
1.2
Section 123623 “Plastic Laminate Countertops”
ACTION SUBMITTALS
A.
1.3
Product Data: For each type of product.
INFORMATION SUBMITTALS
A.
Product data for Criterion 6.2: For adhesives and sealants, documentation in compliance with
Division 01 “Indoor Air Quality Requirements.”
B.
Product data for Criterion 4.2: For toilets, showerheads and faucets, documentation of
compliance with maximum flow rates.
1.4
CLOSEOUT SUBMITTALS
A.
Maintenance data.
RESIDENTIAL PLUMBING FIXTURES
224100 - 1
New York City Housing Preservation and Development
Master Guide Specification for Rehabilitation Projects
July 2014
PART 2 - PRODUCTS
2.1
BATHTUBS
A.
Bathtubs: Porcelain enameled steel over a composite structure, with shower.
1.
Manufacturers: Subject to compliance with requirements, provide products by one of the
following :
a.
b.
c.
d.
e.
f.
g.
2.
Fixture:
a.
b.
c.
d.
e.
f.
3.
4.
5.
6.
Standard: ASME A112.19.4 for porcelain enameled-steel over a composite
structure bathtubs.
Bathing Surface: Slip resistant according to ASTM F 462.
Size: 60 by 30 inches (1525 by 762 mm) (Different sizes subject to field
conditions and HPD approval)
Color: White
Drain Location: Left or Right end. (See Drawings)
Drain: NPS 1-1/2 (DN 40); chrome-plated-brass, pop-up waste and overflow.
Faucet: See section "Bathtub Faucets".
Supply Fittings: Included in faucet.
Tub Filler: Chrome-plated-brass diverter spout.
Waste Fittings:
a.
b.
c.
d.
2.2
Kohler Co.
American Standard America.
Briggs Plumbing Products, Inc.
Gerber
Eljer, Inc.
Sterling; a Kohler company.
Mansfield Plumbing Products LLC; Acrylic Division.
Standard: ASME A112.18.2/CSA B45.125.2.
Drain: Stainless steel or chrome-plated brass, removable strainer.
Overflow: Chrome-plated-brass escutcheon with toggle drain-plug device.
Drain Piping: NPS 1-1/2 cast-brass overflow, P-trap, and waste.
BATHTUB FAUCETS
A.
NSF Standard: Comply with NSF/ANSI 61, "Drinking Water System Components - Health
Effects," for faucet materials that will be in contact with potable water.
B.
Bathtub Faucets: Single handle, pressure balance.
1.
Manufacturers: Subject to compliance with requirements, provide products by one of the
following:
RESIDENTIAL PLUMBING FIXTURES
224100 - 2
New York City Housing Preservation and Development
Master Guide Specification for Rehabilitation Projects
a.
b.
c.
d.
e.
f.
g.
2.
3.
e.
f.
g.
h.
c.
d.
e.
f.
2.3
Body Material: Solid brass.
Finish: Polished chrome plate.
Mounting: Concealed.
Operation: Single handle, twist or rotate control, with hot- and cold-water
indicators.
Antiscald Device: Integral with mixing valve.
Check Stops: Check-valve type, integral with or attached to body; on hot- and
cold-water supply connections.
Diverter: In-tub filler spout.
Supply Connections: NPS 1/2.
Shower Head: WaterSense Certified
a.
b.
5.
American Standard America.
Briggs Plumbing Products, Inc.
Gerber Plumbing Fixtures LLC.
Kohler Co.
Moen Incorporated.
Symmons Industries, Inc.
Delta Co.
Standards: ASME A112.18.1/CSA B125.1 and ASSE 1016.
Faucet:
a.
b.
c.
d.
4.
July 2014
Standard: ASME A112.18.1/CSA B125.1.
Type:
1)
Ball joint with arm and flange for non-handicapped adaptable apartments.
2)
Hand shower with hose, wall-mounting device for handicapped adaptable
apartments.
Shower Head Material: Metallic with chrome-plated finish.
Spray Pattern: Fixed.
Integral Volume Control: Not required.
Shower-Arm, Flow-Control Fitting (Maximum Flow Rate): 1.5 gpm or less.
Bathtub Filler Spout: Chrome-plated brass.
LAVATORIES
A.
Lavatories: Oval self- rimming drop-in vitreous china, counter mounted.
1.
Manufacturers: Subject to compliance with requirement, provide products by one of the
following:
a.
b.
c.
d.
e.
f.
Eljer, Inc.
Kohler Co.
American Standard America.
Mansfield Plumbing Products LLC.
American Standard America.
Briggs Plumbing Products, Inc.
RESIDENTIAL PLUMBING FIXTURES
224100 - 3
New York City Housing Preservation and Development
Master Guide Specification for Rehabilitation Projects
g.
h.
2.4
July 2014
Gerber Plumbing Fixtures LLC.
Sterling; a Kohler company.
2.
Fixture:
a.
Standard: ASME A112.19.2/CSA B45.1 for vitreous-china lavatories.
b.
Type: Self-rimming.
g.
Oval Nominal Size: 20” by 17”.(Different sizes subject to field conditions and
HPD approval)
d.
Faucet-Hole Punching: Three holes, 4 inch centers.
e.
Faucet-Hole Location: Rim.
f.
Color: White
3.
4.
5.
Faucet: See section "Lavatory Faucets".
Supply Fittings: Comply with requirements in "Supply Fittings" Article.
Waste Fittings: Comply with requirements in "Waste Fittings" Article.
LAVATORY FAUCETS
A.
NSF Standard: Comply with NSF/ANSI 61, "Drinking Water System Components - Health
Effects," for faucet materials that will be in contact with potable water.
B.
Lavatory Faucets: WaterSense Certified, Single-handle control mixing valve.
1.
Manufacturers: Subject to compliance with requirements, provide products by one of the
following:
a.
Chicago Faucets.
b.
Delta Faucet Company.
c.
Niagara Conservation
d.
Elkay Manufacturing Co.
e.
Kohler Co.
f.
Price Pfister, Inc.
g.
American Standard America.
h.
Briggs Plumbing Products, Inc.
i.
Delta Faucet Company.
j.
Eljer, Inc.
k.
Gerber Plumbing Fixtures LLC.
l.
Moen Incorporated.
m.
Sterling; a Kohler company.
2.
3.
Standard: ASME A112.18.1/CSA B125.1.
General: Include hot- and cold-water indicators; coordinate faucet inlets with supplies
and fixture holes; coordinate outlet with spout and fixture receptor.
Body Material: General-duty, copper or brass underbody with brass cover plate.
Finish: Polished chrome plate.
Maximum Flow Rate: 0.5 gpm or less.
Centers: 4 inches (102 mm).
Mounting: Deck, exposed.
Valve Handle: Lever.
Inlet(s): NPS 3/8” (DN 10) tubing, plain end .
4.
5.
6.
7.
8.
9.
10.
RESIDENTIAL PLUMBING FIXTURES
224100 - 4
New York City Housing Preservation and Development
Master Guide Specification for Rehabilitation Projects
11.
12.
13.
2.5
July 2014
Spout: Rigid.
Spout Outlet: Aerator.
Drain: Pop up.
KITCHEN SINKS
A.
Kitchen Sinks: One bowl, counter mounted, stainless steel.
1.
Manufacturers: Subject to compliance with requirements, provide products by one of the
following :
a.
American Standard America.
b.
Briggs Plumbing Products, Inc.
c.
Eljer, Inc.
d.
Mansfield Plumbing Products LLC.
e.
Gerber Plumbing Fixtures LLC.
f.
Elkay Manufacturing Co.
g.
Kohler Co.
h.
Revere Sink.
i.
Sterling; a Kohler company.
2.
Fixture:
a.
Standard: ASME A112.19.3/CSA B45.4 for stainless-steel kitchen sinks.
b.
Overall Dimensions: 25” x 22”, (Different sizes subject to field conditions and
HPD approval)
c.
Metal Thickness: 20 gauge.
d.
Bowl:
1)
Dimensions: 21” x 15-3/4” x 7”.(Different sizes subject to field conditions
and HPD approval)
2)
Drain: 3-1/2”inch crumb cup.
a)
3.
4.
5.
Faucet: See section "Sink Faucets"
Supply Fittings: Comply with requirements in "Supply Fittings" Article.
Waste Fittings: Comply with requirements in "Waste Fittings" Article, except include
continuous waste for multi-bowl sinks.
a.
b.
2.6
Location: Centered in bowl.
Disposer: Not required.
Dishwasher Air-Gap Fitting: Not required.
SINK FAUCETS
A.
NSF Standard: Comply with NSF/ANSI 61, "Drinking Water System Components - Health
Effects," for faucet materials that will be in contact with potable water.
B.
Sink Faucets: Kitchen sink.
RESIDENTIAL PLUMBING FIXTURES
224100 - 5
New York City Housing Preservation and Development
Master Guide Specification for Rehabilitation Projects
1.
Manufacturers: Subject to compliance with requirements, provide products by one of the
following:
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
2.7
July 2014
American Standard America.
Chicago Faucets.
Delta Faucet Company.
Elkay Manufacturing Co.
Gerber Plumbing Fixtures LLC.
Kohler Co.
Moen Incorporated.
Price Pfister, Inc.
Eljer, Inc.
Niagara Conservation
Standard: ASME A112.18.1/CSA B125.1.
General: Include hot- and cold-water indicators; coordinate faucet inlets with supplies
and fixture holes; coordinate outlet with spout and fixture receptor.
Finish: Polished chrome plate.
Maximum Flow Rate: 1.5 gpm or less.
Mixing Valve: Single control.
Backflow-Prevention Device for Hand Spray: Not required.
Centers: 8 inches (203 mm).
Mounting: Deck.
Handle(s): Lever.
Spout Type: Swing, shaped tube.
Spout Outlet: Aerator.
WATER CLOSETS
A.
Water Closets: Floor mounted, floor outlet, gravity tank, vitreous china, 1.2 gpf, WaterSense
Certified.
1.
Manufacturers: Subject to compliance with requirements, provide products by one of the
following:
a.
b.
c.
d.
e.
f.
g.
h.
2.
American Standard America.
Briggs Plumbing Products, Inc.
Eljer, Inc.
Gerber Plumbing Fixtures LLC.
Kohler Co.
Mansfield Plumbing Products LLC.
TOTO USA, INC.
Western Pottery
Bowl:
a.
b.
c.
Standards: ASME A112.19.2/CSA B45.1, ASME A112.19.5, and ASSE 1037.
Bowl Type: Siphon jet.
Height: Standard.
RESIDENTIAL PLUMBING FIXTURES
224100 - 6
New York City Housing Preservation and Development
Master Guide Specification for Rehabilitation Projects
d.
a.
b.
Rim Contour: Regular (Round).
Water Consumption: 1.2 gpf
Color: White.
3.
Toilet Seat: See section "Toilet Seats"
4.
Supply Fittings:
a.
b.
c.
Standard: ASME A112.18.1/CSA B125.1.
Supply Piping: Chrome-plated-brass pipe or chrome-plated-copper tube matching
water-supply piping size. Include chrome-plated wall flange.
Stop: Chrome-plated-brass, one-quarter-turn, ball-type or compression stop with
inlet connection matching water-supply piping type and size.
1)
d.
Operation: Wheel handle.
Riser:
1)
2)
2.8
July 2014
Size: NPS 3/8.
Material: Chrome-plated, soft-copper flexible tube, riser.
TOILET SEATS
A.
Toilet Seats with cover shall be molded wood with painted white finish.
1.
Manufacturers: Subject to compliance with requirements, provide products by one of the
following:
a.
b.
c.
d.
e.
f.
g.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
American Standard America.
Centoco Manufacturing Corporation.
Church Seats.
Crane Plumbing LLC.
Eljer, Inc.
Kohler Co.
Olsonite Seat Co.
Standard: IAPMO/ANSI Z124.5.
Material: molded wood with painted white finish. .
Type: Residential.
Shape: Regular rim.
Configuration: Closed front with cover.
Size: Regular.
Hinge Type: Self-sustaining, check.
Hinge Material: Plastic.
Seat Cover: Required.
Color: White.
RESIDENTIAL PLUMBING FIXTURES
224100 - 7
New York City Housing Preservation and Development
Master Guide Specification for Rehabilitation Projects
2.9
July 2014
SUPPLY FITTINGS
A.
NSF Standard: Comply with NSF/ANSI 61, "Drinking Water System Components - Health
Effects," for faucet materials that will be in contact with potable water.
B.
Standard: ASME A112.18.1/CSA B125.1.
C.
Lavatory and Kitchen Sink Supply Fittings:
1.
2.
Supply Piping: Chrome-plated-brass pipe or chrome-plated-copper tube matching watersupply piping size. Include chrome-plated wall flange.
Stops: Chrome-plated-brass, one-quarter-turn, ball-type or compression stop with inlet
connection matching water-supply piping type and size.
a.
3.
Risers:
a.
b.
c.
2.10
Operation: Wheel handle.
Size: NPS 3/8” for lavatories.
Size: NPS 3/8 for kitchen sinks.
Material: Chrome-plated, soft-copper flexible tube, riser
WASTE FITTINGS
A.
Standard: ASME A112.18.2/CSA B125.2.
B.
Drain: Pop-up type with NPS 1-1/4” straight tailpiece as part of faucet for standard lavatories.
C.
Drain: Grid type with NPS 1-1/2” offset tailpiece for accessible kitchen sinks.
D.
Drain: Grid type with NPS 1-1/2” straight tailpiece for standard kitchen sinks.
E.
Trap:
1.
2.
3.
Size: NPS 1-1/4 for lavatories.
Size: NPS 1-1/2 (DN 40) for [kitchen sinks] .
Material: Chrome-plated, two-piece, cast-brass trap and swivel elbow with 0.032-inch(0.83-mm-) thick brass tube to wall ; and chrome-plated-brass or -steel wall flange.
PART 3 - EXECUTION
3.1
INSTALLATION
A.
Install plumbing fixtures level and plumb according to roughing-in drawings.
B.
Install floor-mounted water closets on closet flange attachments to drainage piping.
C.
Install counter-mounting fixtures in and attached to casework.
RESIDENTIAL PLUMBING FIXTURES
224100 - 8
New York City Housing Preservation and Development
Master Guide Specification for Rehabilitation Projects
July 2014
D.
Install water-supply piping with stop on each supply to each fixture to be connected to water
distribution piping. Attach supplies to supports or substrate within pipe spaces behind fixtures.
Install stops in locations where they can be easily reached for operation.
E.
Install toilet seats on water closets.
F.
Install faucet flow-control fittings with specified flow rates and patterns in faucet spouts if
faucets are not available with required rates and patterns. Include adapters if required.
G.
Install shower flow-control fittings with specified maximum flow rates in shower arms.
H.
Install traps on fixture outlets.
I.
Set bathtubs in leveling bed of cement grout.
J.
Install protective shielding pipe covers and enclosures on exposed supplies and waste piping of
ADA adaptable lavatories and sinks. Comply with requirements in Section 220719 "Plumbing
Piping Insulation."
K.
Install wall flanges or escutcheons at piping wall penetrations in exposed, finished locations.
Use deep-pattern escutcheons if required to conceal protruding fittings. Comply with
escutcheon requirements specified in Section 220518 "Escutcheons for Plumbing Piping."
L.
Seal joints between plumbing fixtures, counters, floors, and walls using sanitary-type, one-part,
mildew-resistant silicone sealant. Match sealant color to fixture color. .
3.2
CONNECTIONS
A.
Connect fixtures with water supplies, stops, and risers, and with traps, soil, waste, and vent
piping. Use size fittings required to match fixtures.
B.
Comply with water piping requirements specified in Section 221116 "Domestic Water Piping."
C.
Comply with soil and waste piping requirements specified in Section 221316 "Sanitary Waste
and Vent Piping."
D.
Install protective shielding pipe covers and enclosures on exposed supplies and waste piping of
accessible ADA adaptable lavatories and sinks. Comply with requirements in Section 220719
"Plumbing Piping Insulation."
3.3
ADJUSTING
A.
Operate and adjust plumbing fixtures and controls. Replace damaged and malfunctioning
fixtures, fittings, and controls.
B.
Adjust water pressure at faucets to produce proper flow.
RESIDENTIAL PLUMBING FIXTURES
224100 - 9
New York City Housing Preservation and Development
Master Guide Specification for Rehabilitation Projects
3.4
July 2014
CLEANING AND PROTECTION
A.
After completing installation of plumbing fixtures, inspect and repair damaged finishes.
B.
Clean plumbing fixtures, faucets, and other fittings with manufacturers' recommended cleaning
methods and materials.
C.
Provide protective covering for installed plumbing fixtures and fittings.
D.
Do not allow use of plumbing fixtures for temporary facilities unless approved in writing by
Owner.
END OF SECTION 224100
RESIDENTIAL PLUMBING FIXTURES
224100 - 10