UNIVERSITI KUALA LUMPUR
ASSESSMENT BRIEF
COURSE DETAILS
INSTITUTE
COURSE NAME
COURSE CODE
COURSE LEADER
LECTURER
SEMESTER & YEAR
UniKL BRITISH MALAYSIAN INSTITUTE
FUNDAMENTALS OF MEASUREMENT AND INSTRUMENTATIONS
BPD21503
AZUKI ABDUL SALAM
AZUKI ABDUL SALAM
SEPT 2022
ASSESSMENT DETAILS
TITLE/NAME
LABORATORY 1
WEIGHTING
DATE/DEADLINE
COURSE LEARNING
OUTCOME(S)
INSTRUCTIONS
30%
10 November 2022, 4.00PM
CLO 2: Conduct standard tests of measurement and instrumentation
process and tools (P3,PLO4)
Perform the following tasks:
1. Submit the report in group or individual as instructed by Course Lecturer.
2. All answers must be in English language only.
3. Zero (0) marks given for late submission of technical reports.
Student Name:
ID:
Assessor’s Comment:
Verified by: Course Leader [AAS]
Prepared by: [AAS]
I hereby declare that all my team members have agreed
with this assessment. All team members are certain that
this assessment complies with the Course Syllabus.
Signature:
Date
: 25/10/2022
Group:
Marks:
QSC format
verification
PC/HOS content
validation
TASK NO
CLO
MARKING SCHEME
1
2
Refer Rubric
MARKS
100
TOTAL
100
UNIVERSITI KUALA LUMPUR
RUBRIC FOR REPORT (GROUP)
REPORT TITLE
COURSE CODE
COURSE NAME
STUDENT NAME
STUDENT ID
LABORATORY - GROUP REPORT
FUNDAMENTALS OF MEASUREMENT &
INSTRUMENTATION
BPD21503
VERY
POOR
1
PERFORMANCE CRITERIA
QUALITY OF WORK
VERY EXCELPOOR GOOD
MARKS
GOOD LENT
4
5
2
3
TASK 1
1 Scope of literature review and full descriptions of project.
2 Presentation of relevant facts, concepts, and
interrelationships and understanding of PMMC and other
related theory.
3
4
5
6
7
8
9
10
11
Correct calculation for range 1
Correct calculation for range 2
Correct calculation for range 3
Acceptable experimental results in Table 1
Acceptable experimental results in Table 2
Acceptable experimental results in Table 3
Comprehensive discussion (x5)
Significant conclusion (x2)
Simulation file is attached with the report (x2)
QUALITY OF THE REPORT
1 Report is done in coherently and in an appropriate
format.
2 Report includes figures, tables, diagrams etc that are
clear and accurate.
0
3 Report is well-written, with good use of grammar,
punctuation, and spelling.
MARKS FOR THE REPORT
WEIGHTING OF ASSESSMENT (%) :
100
30
BASED ON WEIGHTING
ASSESSOR REMARKS:
ASSESSED BY:
DATE OF ASSESSMENT:
Task 1
1. Design a basic shunt DC multirange ammeter using PMMC of I fsd=100uA for range
of 0-100mA, 0-150mA and 0-300mA using a simulation software (eg: Multisim,
Pspice, Simulink etc). Hint: To design a basic shunt DC multirange ammeter using
PMMC will require the Aryton Shunt or Universal Shunt (refer lecture notes).
2. Verify all simulation results theoretical calculation.
3. Given the value of internal resistance, Rm is 6.72kΩ, calculate the value of R2, R3
and R4 and use it in the simulation as shown in Figure 1.
Figure 1
4. Show the simulation circuits for all the range.
5. Calculate the percentage of error for different values of Vin.
6. Complete Table 1, 2 and 3.
7. Write a comprehensive report.
The range 0-100mA
Voltage, Vin (V)
Current, I (uA)
Calculated value, Vo
(V)
% error (%)
10
12
15
18
20
Table 1
The range 0-150mA
Voltage, Vin (V)
Current, I (uA)
Calculated value, Vo
(V)
10
12
15
18
20
Table 2
% error (%)
The range 0-300mA
Voltage, Vin (V)
Current, I (uA)
Calculated value, Vo
(V)
10
12
15
18
20
Table 3
% error (%)