Dr. M.Macdonald BEng(Hons)/BSc(Hons) Engineering Analysis 4 School of Computing, Engineering & Built Environment MEng/BEng(Hons) in: Mechanical Systems Engineering Computer-Aided Mechanical Engineering Design & Manufacture (GA) Engineering Design & Analysis 4 January 2022 Examination - Revision Eur Ing Professor Martin Macdonald BSc MSc PhD CEng FIMechE FIES FHEA Department of Mechanical Engineering Dr. M.Macdonald Engineering Design & Analysis 4 - Revision BEng(Hons)/BSc(Hons) Engineering Analysis 4 Engineering Design & Analysis 4 Exam Monday 17 January 2022 11am-2pm on GCU Learn Solutions to be uploaded by 2.45pm GOOD LUCK!! Dr. M.Macdonald Engineering Design & Analysis 4 - Revisiong BEng(Hons)/BSc(Hons) Exam structure: Answer Engineering Analysis 4 4 questions from 6! Section A: 2 Questions covering Structural Analysis and Fracture Mechanics – answer both! Dr M.Kulatunga and Dr D.Gordon Section B: 4 Questions covering Plastic Analysis (x2), Thick Cylinders, Shear Stress Distribution, Unsymmetrical Bending – answer any 2! Prof M.Macdonald Dr. M.Macdonald Engineering Design & Analysis 4 - Revision BEng(Hons)/BSc(Hons) Plastic Analysis 1: Worked Ex.1 & Ex.2 Tut. Q1-5 Engineering Analysis 4 Dr. M.Macdonald Engineering Design & Analysis 4 - Revisiong BEng(Hons)/BSc(Hons) Plastic Analysis 2: Worked Ex.6 Engineering Analysis 4 Dr. M.Macdonald Engineering Design & Analysis 4 - Revision BEng(Hons)/BSc(Hons) Engineering Analysis 4 Shear Stress Distribution and Shear Centres: Worked Ex.1 and 2 Tut. Q2 & 4 Dr. M.Macdonald Engineering Design & Analysis 4 - Revision BEng(Hons)/BSc(Hons) Thick Cylinders: Worked Ex.1 and 2 Tut. Q1-6 Engineering Analysis 4 Dr. M.Macdonald MSc in4 Mechanical Engineering (Design) Engineering Design & Analysis Unsymmetrical Bending: Worked Ex.1 Tut. Q1-4 Advanced Engineering Mechanics - Structures Dr. M.Macdonald Engineering Design & Analysis 4 - Revision BEng(Hons)/BSc(Hons) Engineering Analysis 4 Engineering Design & Analysis 4 Exam Revision Lecture Exam Date: Monday 17 January 2022 Exam Time: 11am – 2pm on GCU Learn Solutions to be uploaded by 2.45pm Good Luck!!
