Senior Design Project Report
CSE/EEE/ETE 499
[Project Title]
Submitted By
[ID Name]
[ID Name]
[ID Name]
Supervisor
Name – Initial
Position
ELECTRICAL AND COMPUTER ENGINEERING
NORTH SOUTH UNIVERSITY
[SEMESTER Year]
Agreement Form
We take great pleasure in submitting our senior design project report on “title/name”.
This report is prepared as a requirement of the Capstone Design Project CSE/EEE/ETE 499 A &
B which is a two semester long senior design course. This course involves multidisciplinary
teams of students who build and test custom designed systems, components or engineering
processes. We would like to request you to accept this report as a partial fulfillment of Bachelor
of Science degree under Electrical and Computer Engineering Department of North South
University.
Declared By:
………………………………………………
Name:
ID:
………………………………………………
Name:
ID:
………………………………………………
Name:
ID:
Approved By:
……………………………
Supervisor
Mohammad Rezaul Islam
Sr. Lecturer, Department of Electrical and Computer Engineering
North South University, Dhaka, Bangladesh
.......................................
Dr. Rezaul Bari
Chair, Department of Electrical and Computer Engineering
North South University, Dhaka, Bangladesh
[Title of project]
[Abstract]
Details of your project with significance, in 10-20 lines.
Focus general reader, and do not use any abbreviation, write in such a way that a reader from
non-engineering background can get overall idea.
Table of Contents
Chapter 1: Introduction
1.1 Project Details
1.2 Background and Motivation
1.3 Project Goal
Page
1
1
1
Chapter 2: Technical Details
2.1
2.2
2.3
2.4
2.5
2.6
2.7
Existing Solution
Proposed Solution
Solution Assessment
Design Alternative
Technical Design: Module Level
Technical Design: System Level
Required Skill
Chapter 3: Essential parts and Devices
3.1 Description of Components
3.2 Test Equipments
Chapter 4: Working Sheets
4.1 Work Breakdown Structure
4.2 Financial Plan and Costs
Chapter 5: Project Summary
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
Result and Discussion
Feasibility Study
Problem Faced and Solutions
Future Development
Conclusion
Project Demonstration Review
Brochure
Poster
IEEE format paper
Appendix
A
B
C
D
Reference
Datasheet
Codes
Survey Questionnaire
2
2
2
List of Tables:
1
Name
Page
List of Figures:
1
Name
Page
CHAPTER 1
INTRODUCTION
1.1
Project Details:
Describe your project in detail. Put focus on the application and applied science,
engineering and technology in your description. Also, mention how significant this
project is and its impact.
1.2
Background and Motivation:
Background:
Provide a brief description of existing solutions with advantage and disadvantage of each
solution. If you are trying to develop something new then related research will be
mentioned in this section. Add at least five related products or solutions. You will
provide elaborate background study at 2.1 section.
Motivation:
Why this project? How this will help people or solve a problem? Are you trying to solve
a problem from your experience? Are you trying to learn new things or preparing for a
competition? In this section, write down what motivated you to take on this project.
1.3
Project Goal:
Although the goal of the project may change in the project development phases, here, list
all the features/functionality/usefulness that this project will achieve by the timeline.
[use 14 bold for the section title and 12 font size for the body of sections. provide
name+number for each figure, table etc.]
CHAPTER 2
TECHNICAL DESIGN
2.1
Existing Solution:
Use section 1.2 and add detail of designs to that level at which proposed solution will be
compared.
Provide a thorough description of existing solutions with advantage and disadvantage of
each solution. Add diagrams and related images.
If you are trying to develop something new then related research will be included with
references in this section.
Add at least five related products or solutions.
2.2
Proposed Solution:
Use previous section and provide a complete description your project with the view of
proposed goal, section 1.3.
2.3
Solution Assessment:
Compare your proposal with existing solutions.
2.4
Design Alternative
If you have any alternate proposal or you are going to develop a prototype, then explain
its compatibility.
2.5
Technical Design: Module Level
Use a block diagram to explain your project. You can use flow diagram or circuit
diagram and explain operation principle using modules. Focus on overall functionality in
this section
2.6
Technical Design: System Level
Provide detail measurements of your device and drawings.
Provide theories and equations of your calculations.
Explain each module in details.
2.7
Required Skills:
List all the skills required to complete the project.
CHAPTER 3
ESSENTIAL PARTS AND DEVICES
3.1
Description of Components:
Provide in a table and describe the required Components/Tools/ Software/facilities for
designing the device.
3.2
Test Requirements:
Provide in a table and describe the required Components/Tools/ Software/Facilities
for testing your device in development phases.
CHAPTER 4
WORKING SHEETS
4.1
Work Breakdown Structure:
Use table/chart to provide weekly schedule of your project. As we have 12+12 scheduled
meetings, so divide your work into 24 weeks and tabulate it in this section.
4.2
Financial Plan and Costs:
Explain how you are going to finance your project costs. How will you divide your
expanses and what are deadlines for payment?
If you could manage funding then mention it here. You can also mention if you have tried
somewhere.
Also, tabulate your overall costs.
Analyze your expanses and discuss what will be the cost for reproducing the device.
CHAPTER 5
PROJECT SUMMARY
5.1
Result and Discussion:
Explain in details your test runs and results. Discuss if you find any error.
Provide reason and margin of error in your result discussion.
5.2
Feasibility Study:
How your project is feasible or viable based on the following criteria:
Financial perspective – cost effectiveness
Resource availability
Social importance
Legal issues if any
Safety issues – suggestion regarding safe operation
Environmental issues
Ethical issues
5.3
Problem Faced and Solutions:
Discuss in details what problems you faced to achieve the project’s goal. How did you
solved/addressed that problem?
Use title and separate paragraphs for each problem.
5.4
Future Development:
How the design can be improved.
How the product can be made compact and polished.
Also discuss how costs can be reduced furthermore.
What are the steps before you take this project into any competition or exhibition etc
5.5
Conclusion:
Conclude the project’s success, your findings, significance and impacts in this section.
5.6
Project Demonstration Review:
Provide responses and comments of your demonstration experience.
5.7
Brochure:
Create an attractive flyer to advertise your project. Put key features and your contact
details in case you find someone interested on your work.
5.8
Poster:
Include your poster in this section
5.9
IEEE format paper:
Include your 4-6 page paper in this section
REFERENCES


Use ieee format
Group similar references
APPENDIX
A
DATASHEET
Make a list of Datasheet of major components in a table of content here.
Attach each datasheet with this list.
You can summarize if the datasheet has too many pages
APPENDIX
B
CODES
APPENDIX
C