Constellation
Workshop
Step 1
Cut around the outside, dotted line around
the constellation pattern.
Glue to the center of the black cardboard.
Make the holes of the constellation with
Step 2
a pencil. You may need some clay underneath.
Step 3
Take the scissors
and make cuts to divide the
black cardboard into eight
wedges. Then, pre-fold the
wedges upwards carefully
by holding the white paper
with the thumb.
Center the constellation in the top of the
Step 4
Cardboard tube and tape each wedge down.
Start with the wedges opposite to each other!
Step 5
When you tape the wedges, add some extra
cello tape around to add extra security.
Step 6
Use a marker and
write the name of the
constellation, as well
as some curiosities you
may find on the internet!