Pipe Hangers & Supports Cooper

Pipe Hangers & Supports Other Cooper B-Line Product Lines Cable Tray Systems Strut Systems (Bolted Framing) Electrical Enclosures Electronic Enclosures Spring Steel Fasteners Cable Runway & Relay Racks (CommData) Meter Mounting & Distribution Equipment Anchors PH-08 www.cooperbline.com B - V O CCAALL with Cooper B-Line ” Questions, Comments, Suggestions? ““ SSMM Voice Of the Customer...Actively Listening bvocal@cooperindustries.com 618-654-2184 ext. 456 SYSTEMS THAT MAKE SENSE Cooper Industries, Ltd. 600 Travis, Ste. 5800 Houston, TX 77002-1001 Phone: 713-209-8400 www.cooperindustries.com © 2008 Cooper B-Line, Inc. Pipe Hangers & Supports PH-08 Cooper B-Line 509 West Monroe Street Highland, IL 62249 Phone: 800-851-7415 Fax: 618-654-1917 Printed in U.S.A. 20908 Pipe Hangers, Pipe Clamps, Beam Clamps, Upper Attachments, Pipe Rollers & Roller Supports, Pipe Suppors-Guides-Shields-Saddles, Concrete Inserts, Brackets, Threaded Accessories, Vibra Trol®, Roof-Top Supports INTRODUCTION Cooper B-Line®, Inc. is a leading manufacturer and fabricator of metal products used in the support of pipe and equipment for industrial, commercial, utility, and OEM installations. Cooper B-Line is proud of the exacting standards of research, design, engineering, and manufacturing that go into each and every product that comprise our pipe hanger product line. Our customers have access to the most complete support systems offered in the industry, including pipe hangers, metal framing, cable tray, slotted angle, fasteners, telecom, enclosures and anchors. Many of Cooper B-Line's products are listed by Underwriters' Laboratories, Inc. All Cooper B-Line products are manufactured to meet or exceed industry standards set for their design and manufacture. Cooper B-Line products are produced in four modern plants consisting of over 1,000,000 square feet. These facilities are located in Highland, Illinois; Troy, Illinois; Reno, Nevada, and Sherman, Texas. Regional sales and distribution centers are located throughout the United States stocking standard Cooper B-Line products for quick service and delivery. This catalog is designed to be helpful to engineers and contractors in the application and selection of pipe hanger and support products for construction and maintenance. If a unique application requires a special product not included in this catalog, Cooper B-Line engineering personnel are ready to furnish design consultation and realistic material estimates. In addition, sales representatives with engineering know-how are located throughout the United States and abroad for your convenience. Warning All hanger products in this catalog are intended for installation and service as illustrated or described. We are aware that these products have been used successfully for purposes other than for which they were designed. We also know that on occasion, these products have failed when used as tools for erection or for some purpose other than intended use. We caution against misapplication which may result in failure or accident. Examples of this misapplication which can result in failure include: the use of a beam clamp on a beam other than described in the catalog; the use of concrete inserts as a anchor for pulling pipe up to the required elevation; and the suspension of clevis hangers, one under another, which can result in the accumulative load greater than the pipe hanger will support. Cooper B-Line pipe hanger products are manufactured in accordance with industry standards. Our customers should exercise care to use these products properly so as to avoid an on-the-job accident. Consult the Home Office for assistance of proper installation and use of the products in this catalog. SINCE 1924 MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTING INDUSTRY, INC. Cooper B-Line 509 West Monroe Street P.O. Box 326 Highland, Illinois 62249-0326 Phone: 800-851-7415 www.cooperbline.com Table of Contents Vibra Trol® Pads .......................................................... 170-172 Molded Mounts ............................................... 172 Cup Mounts ..................................................... 173 Spring Mounts ......................................... 174-179 Vibration Hangers .................................... 180-181 Spring Hangers ........................................ 182-188 Vibra Clamp ............................................. 189-190 Isolation Products ........................................... 191 Pictorial Index .................................................. 2-13 Strut Systems Information ............................ 14-15 Technical Data Materials ............................................................ 16 Corrosion ........................................................... 16 Finishes ........................................................ 16-17 General Information .......................................... 17 Recommended Specifications ................... 18-23 Beam Clamps C-Clamps ..................................................... 25-29 Bottom Beam Clamps ................................. 29-34 Top Beam Clamps ............................................. 35 Trus Joist & Angle Iron Beam Clamps ............ 36 Dura-Blok® Base ................................................................. 193 Base & Channel ....................................... 194-196 Base & Clamp Riser ....................................... 197 Base & Harness ....................................... 198-199 Base & Rollers ......................................... 200-201 Base Stand ...................................................... 201 Load Distribution Plate .................................. 202 Pipe Hangers 'J' Hangers ........................................................ 39 Clevis Hangers ............................................ 40-47 Band Hangers .............................................. 48-50 Split Clamps & Hangers, Rings .................. 51-58 Wall Mount Lay-In Hangers ........................ 55-56 Spring Hangers ................................................. 57 Pipe Clamps Risers ............................................................ Underground Clamps .................................. Clamps ......................................................... Straps ........................................................... 61-62 63-64 65-69 70-71 Pipe Rollers & Roller Supports Roller Hangers ............................................. 73-74 Roller Supports ............................................ 75-83 Roller Stands ............................................... 84-86 Spring Cushion Roller Hanger ......................... 87 Rollers .......................................................... 88-89 Dura Clean® Channel ............................................................ Wall Mount Rail ............................................... U-Bolt & Threaded Rod .................................. Hardware & Spacers ...................................... 206 207 208 209 KwikWire® Clamps ............................................................. Wire Rope ........................................................ KwikPak Kits ................................................... Accessories ..................................................... 212 212 213 214 Hanger Assemblies ................................... 216-233 Seicmic Assemblies .................................. 234-238 Reference Data Metric Conversions ........................................ 239 Miscellaneous Charts ............................. 240-249 MSS & Federal Specifications to B-Line Cross References .................... 250-251 B-Line Compliances & Approvals .......... 252-253 Trapeze Hanger Chart .................................... 254 Pipe Supports, Guides, Shields & Saddles Calcium Silicate Shields ................................... 91 Stands & Supports .................................... 92-103 Guides & Anchors ................................... 104-109 Slides, Shields, Saddles .......................... 110-126 Index ........................................................... 255-256 Concrete Inserts Anchor Bolt Insert .......................................... 129 Spot Inserts & Nuts ................................. 130-136 Anchor Clips .................................................... 137 Brackets Light Duty ........................................................ 139 Medium Duty ................................................... 140 Heavy Duty ...................................................... 141 Your Local Representative Is: Upper Attachments Ceiling Flange ................................................. 143 Angle Supports ........................................ 143-145 Bolted & Welded ...................................... 146-147 Concrete Plates ....................................... 148-150 Rod Beam Attachments ................................. 151 Threaded Accessories U-Bolts ..................................................... 154-155 Miscellaneous Accessories ............ 153, 156-158 Rods, Couplings & Washers ................... 159-166 1 Pictorial Index Pictorial Index BEAM CLAMPS Figure B3036L Malleable Iron C-Clamp With Locknut Page 25 Figure B351L Steel C-Clamp With Locknut Page 25 Figure B3033 Wide Jaw Top Flange C-Clamp Page 27 Figure B3034 Top Flange C-Clamp Page 28 Figure B303-B309 Beam Clamp Page 29 Figure B321 Series Beam Clamp Page 29 Figure B3055 Steel Beam Clamp Page 31 Figure B3042 Top Beam Clamp Page 35 Figure B3362 thru B3365 Retaining Strap Page 26 Figure B3367 Retaining Strap Page 30 Figure B3037 Z-Purlin Beam Clamp Page 26 Figure B312 Retaining Strap Page 30 Figure B3054 Malleable Iron Beam Clamp Page 33 Figure B3050 Beam Clamp Page 32 Figure B3045 Side Beam Clamp Page 35 2 Figure B3031-3/8 Light Duty Malleable C-Clamp Page 26 Figure B3040 Adjustable Beam Clamp Page 30 Figure B3291 thru B3298 UFS Forged Steel Beam Clamp Page 34 Figure B3052 Trus Joist Beam Clamp Page 36 Pictorial Index Figure B3690 Adjustable 'J' Hanger Page 39 Figure B3690C Plastic Coated Adjustable 'J' Hanger Page 39 Figure B3690F Felt Lined Adjustable 'J' Hanger Page 39 Figure B3104C Plastic Coated Light Duty Clevis Hanger Page 42 Pictorial Index PIPE HANGERS Figure B3100 Standard Clevis Hanger Page 40 & 41 ✸ Figure B3100C Plastic Coated Standard Clevis Hanger Page 40 & 41 Figure B3100F Felt Lined Standard Clevis Hanger Page 40 & 41 Figure B3102 AWWA Clevis Hanger Page 44 Figure B3104CTC Copper Tubing Plastic Coated Light Duty Clevis Hanger Page 43 ◆ Figure B3108 Extended Clevis Hanger Page 45 Figure B3104 Light Duty Clevis Hanger Page 42 ✸ Figure B3104CT Copper Tubing Light Duty Clevis Hanger Page 43 ◆ Figure B3109 Flat Top Clevis Hanger Page 46 Figure B3104F Felt Lined Light Duty Clevis Hanger Page 42 Figure B3106 Vee Bottom Clevis Hanger Page 47 ◆ Dura-Copper Finish ✸ Dura-Green Finish 3 Figure B3106V Plastic Pipe Support Channel Page 47 Pictorial Index Pictorial Index PIPE HANGERS (Continued) Figure B3170 Adjustable Swivel Ring Page 49 Figure B3170NF Adjustable Swivel Ring (NFPA Rod Sizes) Page 48 Figure B3170NFC Plastic Coated Adjustable Swivel Ring (NFPA Rod Sizes) Page 48 Figure B3170NFF Felt Lined Adjustable Swivel Ring (NFPA Rod Sizes) Page 48 Figure B3198H Hinged Extension Split Pipe Clamp Page 51 Figure B3198P Figure B3198R Extension Split Pipe Clamp Page 51 Figure B3198HCT Copper Tubing Hinged Extension Split Pipe Clamp Page 52 ◆ Figure B3198RCT Copper Tubing Extension Split Pipe Clamp Page 52 ◆ Figure B3171 Adjustable Split Ring Swivel Hanger Page 54 Figure B386 Suspension Rod Pipe Clamp Page 55 Figure B3170CT Copper Tubing Adjustable Swivel Ring Page 510 ◆ Figure B3170CTC Copper Tubing Plastic Coated Adjustable Swivel Ring Page 50 ◆ Figure B3175 Ring and Bolt Hanger Page 53 Figure B3175CT Copper Tubing Ring and Bolt Hanger Page 53 ◆ Figure B3190 Offset 'J' Hook Page 56 Figure B3262 Light Duty Spring Hanger Page 57 Figure B3191 Straight 'J' Hook Page 56 ◆ Dura-Copper Finish 4 Pictorial Index Figure BH-2-4 BH-5-8 BH-9-12 Parallel Strap Hanger Page 58 Pictorial Index PIPE HANGERS (Continued) Figure BH-2-4-R BH-5-8-R BH-9-12-R Right Angle Strap Hanger Page 58 Figure BL1400 thru BL1490 Hanger Page 58 PIPE CLAMPS Figure B3373 Standard Riser Clamp Page 61 ✸ Figure B3373CT Copper Tubing Riser Clamp Page 62 ◆ Figure B3373C Plastic Coated Standard Riser Clamp Page 61 Figure B3373CTC Copper Tubing Plastic Coated Riser Clamp Page 62 ◆ Figure B3132 Two-Bolt Underground Clamp Page 63 Figure B3134 Four-Bolt Underground Clamp Page 64 Figure B3140 Standard Pipe Clamp Page 65 ✸ Figure B3132W Lug Washer Page 63 Figure B3134W Washer Page 64 Figure B3142 Heavy Duty Pipe Clamp Page 66 Figure B3144 Double Bolt Pipe Clamp Page 67 Figure B3146 Heavy Duty Double Bolt Pipe Clamp Page 68 Figure B3148 Offset Pipe Clamp Page 69 Figure B3149 Marine Hanger Page 69 ◆ Dura-Copper Finish ✸ Dura-Green Finish 5 Figure B2400 Standard Pipe Strap Page 70-71 Pictorial Index PIPE ROLLERS & ROLLER SUPPORTS Pictorial Index Figure B3110 Adjustable Steel Yoke Pipe Roll Page 73 ✸ Figure B3114 Pipe Roll With Sockets Page 74 Figure B3124 Roller Support Page 78 Figure B379 Pipe Rollers Page 82 Figure B3119SL Roller With Steel Base Plate Page 86 Figure B3122 Adjustable Roller Support Page 75 Figure B3122A Adjustable Double Roller Guide Page 76 Figure B218 Pipe Rollers Page 80 Figure B3126 Roller Support Page 79 Figure B479 Pipe Rollers Page 83 Figure B3117SL Steel Roller Stand Page 84 Figure B3114R Long Pipe Roll Only Page 88 Figure B3264 Spring Cushion Hanger Page 87 ✸ Dura-Green Finish 6 Figure B3120 Roller Chair Page 77 Figure B219 Pipe Rollers Page 81 Figure B3118SL Adjustable Roller Stand With Base Plate Page 85 Figure B3117R Short Pipe Roll Only Page 88 Pictorial Index Figure B3088 Base Stand Page 92 Figure B3380 thru B3384 360° Calcium Silicate Shield Page 91 Figure B3088S Seismic Base Stand Page 93 Figure B3089 Pipe Support Adjuster Page 95 Figure B3092 Adjustable Pipe Saddle Support With Yoke Page 100-101 Figure B3147A Figure B3147B Anchor Chairs Page 106-107 Figure B3088T Threaded Base Stand Page 92 Figure B3088ST Seismic Threaded Base Stand Page 93 Figure B3090 Pipe Saddle Support With U-Bolt Page 96-97 Pictorial Index PIPE SUPPORTS, GUIDES, SHIELDS & SADDLES Figure B3096 Adjustable Pipe Saddle Support Page 94 Figure B3095 Pipe Saddle Support Page 98-99 Figure B3281 thru B3287 Pipe Alignment Guide Pages 104 & 105 Figure B3093 Adjustable Pipe Saddle Support Page 102-103 Figure B3256 Hold-Down Anchor Clamp Page 108 7 Figure B3257 Base Plate Page 109 Figure B2417 Pipe Guides Page 106 Pictorial Index Pictorial Index PIPE SUPPORTS, GUIDES, SHIELDS & SADDLES (Continued) Figure B3891 thru B3897 Pipe Slides Pages 110-113 Figure B3151 Insulation Protection Shield Page 125 Figure B3991 thru B3993 Pipe Slides Pages 114-117 Figure B3160 thru B3165 Pipe Covering Protection Saddle Pages 118-123 Figure B3154 Short Insulation Protection Shield Page 126 Figure B3153 Insulation Protection Shield With Tabs Page 125 Figure B3155 Short Insulation Protection Shield With Tabs Page 126 CONCRETE INSERTS Figure B3019 Adjustable Metal Deck Ceiling Bolt Page 129 Figure B2501 Light Duty Spot Insert Page 129 Figure B2500 Light Duty Spot Insert Page 130 Figure B2505 thru B2508 Spot Insert Page 132 Figure N2500 Steel Insert Nut Page 130 Figure B2503 Heavy Duty Spot Insert Page 133 Figure B3014 Malleable Iron Spot Insert Page 131 Figure B3014N Malleable Iron Insert Nut Page 131 Figure BD40 Fastener Clip Page 137 Figure B22I, B32I, B52I Continuous Concrete Inserts Pages 134 - 136 8 Figure BE-5-8 Fastener Clip Page 137 Pictorial Index Figure B3064 Adjustable Strut Bracket Page 139 Pictorial Index BRACKETS Figure B3068 Light Duty Bracket Page 139 Figure B3066 Medium Duty Angle Bracket Page 140 Figure B3067 Heavy Duty Angle Bracket Page 141 UPPER ATTACHMENTS Figure B3199 Ceiling Flange Page 143 Figure B3199CT Dura-Copper Coated Ceiling Flange Page 143 ◆ Figure B3060 Side Beam Angle Clip Page 143 Figure B3062 Side Beam Bracket Page 145 Figure B3058 Side Beam Connector Page 145 Figure B3085 Rod Attachment Concrete Plate Page 148 Figure B3086 Clevis Concrete Plate Page 149 ◆ Dura-Copper Finish 9 Figure B3060L Side Beam Angle Clip Page 144 Figure B3083 Figure B3083WO Welded Beam Attachment Page 146 Figure B3084 Single Lug Concrete Plate Page 150 Figure B3070 Reversible Angle Clip Page 144 Figure B3080S (Short) Figure B3080L (Long) Structural Welding Lug Page 147 Figure B3082 Rod Beam Attachment Page 151 Pictorial Index Pictorial Index THREADED ACCESSORIES) Figure B3222 Eye Socket Page 153 Figure B3200 Weldless Eye Nut Page 153 Figure B3203 Extension Piece Page 157 Figure B3205 Machine Threaded Rod Page 159 Figure B3212 J-Bolt Page 162 Figure B3188 Standard U-Bolt Pages 153 & 154 Figure B3201 Forged Steel Clevis Page 156 Figure B3224 Hanger Adjuster Page 158 Figure B3223 Offset Eye Socket Page 157 Figure B3224CT Dura-Copper Coated Hanger Adjuster Page 158 ◆ Figure B3210 Eye Rod Page 160 Figure ATR All Threaded Rod Page 159 Figure B3213 Coach Screw Rod Page 162 Figure B3188C Plastic Coated Standard U-Bolt Pages 153 & 154 Figure B3211 Welded Eye Rod Page 160 Figure B3227 Flat End Lag Screw Page 163 ◆ Dura-Copper Finish 10 Figure B3228 Hex Head Lag Bolt Page 163 Figure B3202 Turnbuckle Page 158 Figure B3210X Linked Eye Rod Page 161 Figure B3211X Linked Welded Eye Rod Page 161 Figure DS 16 x 2 #16 x 2" Drive Screw Page 163 Pictorial Index Figure B655 Steel Rod Coupling Page 164 Figure B656 Steel Reducer Rod Coupling Page 164 Figure B3220 Malleable Iron Rod Coupling Page 164 Figure B3248 Steel Washer Plate Page 165 Pictorial Index THREADED ACCESSORIES (Continued) Figure B200 Square Washer Page 165 Figure B3234 Bevel Washer Page 166 VIBRA TROL® Figure NNP Ribbed Neoprene Pad Page 170 Figure CNP Cork and Ribbed Neoprene Pad Page 170 Figure BVS Vibra Strip™ for 15/8" Wide B-Line channel Page 172 Figure OML/OM Spring Mount Pages 174 & 175 Figure CNNK Cork, Ribbed Neoprene and Steel Page 171 Figure NVD Double Deflection Page 172 Figure HMLT/HMT Housed 1" Deflection Mounting Pages 178 & 179 Figure HMLE/HME Housed 1" Deflection Mounting Pages 176 & 177 11 Figure VRP Rubber Cube Pad Page 171 Figure CM Metal Housing and Neoprene Page 173 Figure ANH Acoustical Hanger Page 180 Pictorial Index Pictorial Index VIBRA TROL® (Continued) Figure RH Neoprene Hanger Page 181 Figure HSL/HS Vibration Spring Hanger Pages 182 & 183 Figure BVT Vibraclamp Tubing Sizes Page 189 Figure BVP Vibraclamp Pipe Sizes Page 190 Figure HESL/HES Combination Spring & Neoprene Pages 184 & 185 Figure B1999 Vibra Cushion Page 191 Figure SHE Isolation Spring Hanger Pages 186 & 187 Figure ISO ISO Pipe Page 191 DURA-BLOK™ Bases Page 193 Base & Clamp Riser Page 197 Base & Short Channel Page 194 Base & Tall Channel Page 195 Double Base & Long Channel Page 196 Base & Fixed Height Roller Assembly Page 200 Bases & Harness Assembly Page 198-199 Base & Adjustable Height Roller Assembly Page 201 12 Pictorial Index Pictorial Index DURA-BLOK™ (Continued) Base & Adjustabel Height Channel Page 201 Load Distribution Plate Page 202 DURA-CLEAN™ Wall Mount Rails Page 207 Channels Page 206 All Threaded Rods Page 208 Hardware Page 209 U-Bolts Page 208 Spacers Page 209 KWIKWIRE™ Wire Rope Page 212 KwikPak Kits Page 213 KwikWire Clamps Page 212 Air Duct Corner Protector Page 214 Air Duct Support Page 214 13 Wire Rope Cutter Page 214 Strut Systems Cooper B-Line's metal framing support system is designed with many time-saving features. Fully adjustable and reusable, with a complete line of channels, fittings, and accessories for multi-purpose applications. SELECTION CHART for Channels, Materials and Hole Patterns Strut Systems Information Material & Thickness* Channel Dimensions B11 31/4" B12 27/16" B22 Stainless Steel Width Height Channel Type Channel Hole Pattern ** Steel Alum. Type 304 Type 316 1 2 3 4 SH S H17/8 TH KO6 (82.5) 15/8" (41.3) 12 Ga. -- -- -- 1 1 1 -- 1 (61.9) 15/8" (41.3) 12 Ga. .105 -- -- 12 1 12 -- 12 15/8" (41.3) 15/8" (41.3) 12 Ga. .105 12 Ga. 12 Ga. 1234 1 1234 1 12 B24 15/8" (41.3) 15/8" (41.3) 14 Ga. .080 14 Ga. 14 Ga. 1234 1 1234 -- 12 B26 15/8" (41.3) 15/8" (41.3) 16 Ga. -- -- -- 1 1 1 -- 1 B32 13/8" (34.9) 15/8" (41.3) 12 Ga. -- 12 Ga. -- 13 1 13 -- 1 B42 1" (25.4) 15/8" (41.3) 12 Ga. -- 12 Ga. -- 13 1 13 -- 1 B52 13/16" (20.6) 15/8" (41.3) 12 Ga. -- -- -- 1 1 1 -- 1 B54 13/16" (20.6) 15/8" (41.3) 14 Ga. .080 14 Ga. 14 Ga. 1234 1 1234 -- 12 B56 13/16" (20.6) 15/8" (41.3) 16 Ga. -- -- -- 1 1 1 -- 1 Channel Nuts B2000 Series Schedule 40 Pipe Clamps Part No. B2001 Nomina l Pipe Size 3/8" (10) B2008 1/2" (15) 16 B2009 3/4" (20) 14 B2010 1" (25) 14 Mat'l Ga. B2011 11/4" (32) 14 Size and Part Number Thread Size 1/4"-20 With Spring N224 Without Spring N224WO Twirl Nut TN224 3/8"-16 N228 N228WO TN228 1/2"-13 N225 N225WO TN225 5/8"-11 3/4"-10 N255 N275 N255WO N275WO --- Available Finishes: Electro-Galvanized Combo Nut Washers Part Number Thread Size NW524 1/4"-20 NW528 3/8"-16 NW525 1/2"-13 Copper Tubing Clamps Dura Copper® Available Finishes: Electro-Galvanized Part No. Nominal Tubing Size Mat'l Ga. 16 B2012 11/2" (40) 12 B2026DCU 1/2" (15) 16 B2013 2" (50) 12 B2008DCU 3/4" (20) 16 B2014 21/2" (60) 12 B2030DCU 1" (25) 14 B2015 3" (80) 12 B2032DCU 11/4" (32) 14 B2016 31/2" (90) 11 B2011DCU 11/2" (40) 14 B2017 4" (100) 11 B2038DCU 2" (50) 12 B2018 41/2" (115) 11 B2042DCU 21/2" (60) 12 B2019 5" (125) 11 B2046DCU 3" (80) 12 B2020 6" (150) 11 B2050DCU 31/2" (90) 12 B2021 7" (175) 11 B2054DCU 4" (100) 11 B2022 8" (200) 11 Available Finishes: Electro-Galvanized, Aluminum, Stainless, Dura-Copper Painted, Hot-Dip Galvanized and PVC coated. Nut and bolts are included with all two-piece clamps. ** Add “PA” to Part No. for Pre-assembled All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 14 Strut Systems Below are some basic clamp and cushions to be used with a strut system. For the industry's most complete line of strut and strut fittings, refer to Cooper B-Line's Strut Systems Engineering Catalog. O.D. Pipe Clamps Part No. O.D. Size (Outside Dia.) 1/4" B2023 B2024 B2025 B2026 B2027 B2028 B2029 B2030 B2031 B2032 B2004 B2011 B2005 B2036 B2037 B2038 B2039 3/8" 1/2" 5/8" 3/4" 7/8" 1" 11/8" 11/4" 13/8" 11/2" 15/8" 13/4" 17/8" 2" 21/8" 21/4" NE B-LI 50 BVP1 I.P. 2” 1 1/ (6.3) (9.5) (12.7) (15.9) (19.0) (22.2) (25.4) (28.6) (31.7) (34.9) (38.1) (41.3) (44.4) (47.6) (50.8) (54.0) (57.1) Mat'l Ga. 16 16 16 16 16 16 14 14 14 14 14 14 12 12 12 12 12 23/8" 21/2" 25/8" 23/4" 27/8" 3" 31/8" 31/2" 33/8" 31/2" 35/8" 33/4" 37/8" 4" 41/8" 41/4" 43/8" 41/2" 45/8" 43/4" 47/8" 5" 51/8" 51/4" 53/8" 51/2" (60.3) (63.5) (66.7) (69.8) (73.0) (76.2) (79.4) (82.5) (85.7) (88.9) (92.1) (95.2) (98.4) (101.6) (104.8) (107.9) (111.1) (114.3) (117.5) (120.6) (123.8) (127.0) (130.2) (133.3) (136.5) (139.7) Mat'l Ga. 12 12 12 12 12 12 12 12 12 12 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 BVT & BVP Series Vibra-Clamps® For Copper Tubing & OD Sizes Catalog No. BVT025 BVT037 BVT050 BVT062 BVT075 BVT087 BVT100 BVT112 BVT125 BVT137 BVT150 BVT162 BVT175 BVT187 BVT200 BVT212 BVT225 BVT250 BVT262 BVT300 BVT312 BVT362 BVT400 BVT412 BVT612 B2013 B2041 B2042 B2043 B2014 B2045 B2046 B2047 B2048 B2015 B2050 B2051 B2052 B2016 B2054 B2055 B2056 B2017 B2058 B2059 B2060 B2061 B2062 B2063 B2064 B2065 O.D. Size (Outside Dia.) Copper & Steel OD Tubing Size 1/4" (6.3) 3/8" (9.5) 1/2" (12.7) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 1" (25.4) 11/8" (28.6) 11/4" (31.7) 13/8" (34.9) 11/2" (38.1) 15/8" (41.3) 13/4" (44.4) 17/8" (47.6) 2" (50.8) 21/8" (54.0) 21/4" (57.1) 21/2" (63.5) 25/8" (66.7) 3" (76.2) 31/8" (79.4) 35/8" (92.1) 4" (101.6) 41/8" (104.8) 61/8" (155.6) Nominal Copper Size --1/4" (6) 3/8" (10) 1/2" (15) 5/8" (17) 3/4" (20) --1" (25) --11/4" (32) --11/2" (40) ------2" (50) ----21/2" (65) --3" (80) 31/2" (90) --4" (100) 6" (150) B1999 Vibra-Cushion • Inhibits Galvanic Reaction • Reduces Sound & Vibration • Used on refrigeration, HVAC, copper tubing, glass pipes & hydraulic lines Available in 20 Ft. rolls. For Rigid Conduit or Iron Pipe Nominal Length of Use Size Vibra-Cushion Clamp No. 3/8" (10) 21/8" (54.0) B2002 1/2" (15) 25/8" (66.7) B2009 3/4" (20) 31/4" (82.5) B2031 1" (25) 41/8" (104.8) B2004 11/4" (32) 53/16" (131.8) B2012 11/2" (40) 515/16" (150.8) B2038 2" (50) 71/2" (190.5) B2042 21/2" (65) 9" (228.6) B2046 3" (80) 11" (279.4) B2051 31/2" (90) 121/2" (317.5) B2055 4" (100) 141/2" (368.3) B2059 5" (125) 177/16" (442.9) B2067 6" (150) 203/4" (527.0) B2116 For Thinwall (EMT) Conduit Available for tubing and pipe sizes 1/4" to 6", OD sizes 1/4" to 65/8". Easy one tool installation, dampens vibration and noise, secures tubing firmly, and protects against galvanic reaction. Stainless Steel available For Pipe Sizes Catalog No. BVP025 BVP037 BVP050 BVP075 BVP100 BVP125 BVP150 BVP200 BVP250 BVP300 BVP350 BVP400 BVP500 BVP600 Nominal Pipe Size 1/4" (6) 3/8" (10) 1/2" (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 21/2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) Nominal Size Length of Vibra-Cushion Use Clamp No. 3/8" 113/16" (46.0) 23/16" (58.7) 27/8" (73.0) 35/8" (92.1) 43/8" (120.6) 57/16" (138.1) 67/8" (174.6) B2027 B2002 B2003 B2032 B2036 B2012 B2013 (10) (15) 3/4" (20) 1" (25) 11/4" (32) 11/2" (40) 2" (50) 1/2" For Copper Tubing Type L & K Nominal Length of Size Vibra-Cushion 1/4" (6) 13/16" (30.2) 3/8" (10) 19/16" (39.7) 1/2" (15) 17/8" (47.6) 5/8" (17) 25/16" (58.7) 3/4" (20) 23/4" (69.8) 1" (25) 31/2" (88.9) 11/4" (32) 45/16" (109.5) 11/2" (40) 51/8" (130.2) 2" (50) 611/16" (169.9) 21/2" (65) 81/4" (209.5) 3" (80) 913/16" (249.2) 31/2" (90) 113/8" (288.9) 4" (100) 1215/16" (328.6) 5" (125) 61/8" (409.6) 6" (150) 191/4" (488.9) 8" (200) 251/2" (647.7) Use Clamp No. B2026 B2027 B2028 B2029 B2030 B2032 B2011 B2036 B2013 B2014 B2048 B2052 B2056 B2064 B2112 B2128 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 15 Strut Systems Information Part No. B2000 Series Technical Data MATERIALS Carbon Steel Carbon steel is used in the manufacture of Cooper B-Line pipe hangers and supports. Excellent strength characteristics and adaptability to cold forming provide a wel engineered design. By cold forming the steel, mechanical properties are increased, adding to the structural integrity of the fabricated hanger. Stainless Steel Technical Data AISI Type 304 and Type 316 are non-magnetic members of the austenitic stainless steel group. Several conditions make the use of stainless steel ideal. These include reducing long term maintenance costs, high ambient temperatures, appearance, and stable structural properties such as yield strength, and high creep resistance. Electro-Plated Zinc, Pre-Galvanized, and Hot-Dip Galvanized After Fabrication. In all cases, the zinc protects the steel first as a sacrificial anode to repair bare areas on cut edges and gouges. When exposed to air and moisture, zinc forms a tough, adherent protective film consisting of a mixture of zinc oxides, hydroxides, and carbonates. The corrosion resistance of zinc is directly related to its thickness and the environment. For example a 0.2 mil (5 µm) coating will last twice as long as a 0.1 mil (2.5 µm) coating in the same environment. Electro-Plated Zinc (ASTM B 633 SC1 or SC3) An Electro-Plated process deposits a coating of zinc on the steel by electrolysis from a bath of zinc salts. This coating is pure zinc and adheres to the steel with a molecular bond. A maximum of 0.5 mils (12.7 µm) of zinc can be applied by this method. This coating is recommended for in-door use in relatively dry areas. Pre-Galvanized Zinc (ASTM A 653 Coating Designation G90) CORROSION All metal surfaces exposed to the environment are affected by corrosion. Depending on the physical properties of the metal and its proximity to other dissimilar metals, an electrochemical reaction may occur which causes an attack on the metal itself, resulting in corrosion. Chemical corrosion is limited to highly corrosive environments, high temperatures, or a combination of both. FINISHES Zinc Coatings Protective zinc coatings are available on a number of pipe hangers and accessories in three basic forms: Pre-galvanized zinc is produced by continuously rolling the steel coils or sheets through molten zinc at the steel mills. This is also known as "mill-galvanized" or "hot-dipped mill galvanized". Coils are then slit to size for fabrication of pipe hangers. Coating thicknesses of G90, is 0.90 ounces per square foot (0.27 kg/m2) of steel surface. Zn ZnFe Fe ZnO Protection of cut edges with zinc coatings. Cut edges and welded areas are not zinc coated; however, zinc near the uncoated metal becomes a sacrificial anode which protects the bare areas after a short period of time. Pre-galvanized steel is not generally recommended for use outdoors in industrial environments, 16 but is suitable for extended exposure in dry or mildly corrosive atmospheres. Hot-Dip Galvanized After Fabrication (ASTM A 123) After a pipe hanger or fitting has been fabricated, it is completely immersed in a bath of molten zinc. A metallurgical bond is formed, resulting in a zinc coating that completely coats all surfaces, including edges. Zinc coatings of this specification have a minimum thickness of 1.50 ounces per square foot (0.45 kg/m2) on each side or a total of 3.0 ounces per square foot (0.9 kg/m2) of steel. Hot-dip galvanized after fabrication is recommended for outdoor exposure. For best results, a zinc rich paint (available from Cooper B-Line) should be applied to field cuts. The zinc rich paint will provide immediate protection for field cuts and eliminate the short time period for galvanic action to "heal" the damaged coating. Plastic Coating Some products offered by Cooper B-Line are plastic or vinyl coated for prevention of galvanic reaction between materials or for noise reduction. These coated products can also be used where contact between glass pipe and hanger is not desirable. Felt lined hangers may be substituted for same purpose. Red Primer A corrosion resistant metal primer containing rust inhibitive pigments. Technical Data Dura-Copper® and Dura-Green® are water borne epoxy coatings applied to Cooper B-Line products by a precisely controlled cathodic electro-deposition process. This process is accomplished using a conveyor to transport parts through several cleaning, phosphatizing and application stages prior to being baked (See diagram below). This custom designed paint system is used for painting all copper painted hanger parts and all green channel, slotted angle and fittings. Samples are selected on a routine basis for Salt Spray (fog) testing to verify the quality of the finish. These tests are performed in accordance with ASTM B 117-73 and evaluated and rated according to ASTM D 1654-79 (Tables 1 & 2). The Dura-Copper® and Dura-Green® Epoxy coatings have been tested and listed by Underwriters Laboratories in accordance with "Standard for Pipe Hanger Equipment for Fire Protection Service, UL 203" and meet or exceed all requirements of Federal Specification TT-C-490B Paragraph 3. Quality Assurance Cooper B-Line System's Quality Assurance Program has been developed and implemented for compliance to various industry standards and specifications. DURA-COPPER® & DURA-GREEN® EPOXY COATING PROCESS TANK 1 TANK 2 TANK 3 TANK 4 TANK 5 TANK 6 TANK 7 TANK 8 BAKE OVEN Parts are thoroughly cleaned and phosphatized. Rinse is applied to remove insoluble salts and unreacted phosphates. Phosphatized sealer is applied to insure corrosion resistance and paint adhesion. The material moves through clear water rinse to remove excess phosphates. Deionized rinse prepares the metal for the cathodic electro-coating. The electrocoating tank applies a uniform coat of epoxy paint to the entire surface. The first post rinse removes any unelectrically attracted solids. The final rinse insures a smooth, nonblemish finish. The curing process takes 20 minutes at a baking temperature of 375°F (199°C). SALT SPRAY TEST RESULTS Dura-Copper® out performs Copper Plating 4 to 1 Dura-Copper® Epoxy Copper Plating Elapsed Time (1) All salt spray (fog) tests conducted in accordance with ASTM B 117-73 and evaluated and rated according to ASTM D 1654-79 Tables 1 & 2. Tests were performed and certified by an independent testing laboratory. General Information Torque The torque values in this catalog are to be used as a guide only. The relationship between the applied torque or torque wrench reading and the actual tension created in the bolt may be substantially different. Important factors affecting torque-tension relationships include friction under the bolt head or nut, hole tolerances, and torque wrench tolerances. Accuracy of many commercial torque wrenches may vary as much as plus or minus 25%. Charts and Tables Charts and tables in this section are compiled from information published by nationally recognized organizations and are intended for use as a guide only. Cooper B-Line recommends that users of this information determine the validity of such information as applied to their own applications. Cooper B-Line, Inc. reserves the right to make specification changes without notice. 17 Technical Data Dura-Copper® and Dura-Green® Epoxy Coatings Technical Data SECTION 15140 - PIPE HANGERS AND SUPPORTS Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the pipe hanger and supports as described in this specification. 1.02 REFERENCES A. ASTM B 633 - Specification for Electrodeposited Coatings of Zinc on Iron and Steel. B. ASTM A 123 - Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products. Technical Data C. ASTM A 653 - Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process. D. ASTM A 1011 - Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability. E. MSS SP-58 - Manufacturers Standardization Society: Pipe Hangers and Supports - Materials, Design, and Manufacture. F. MSS SP-69 - Manufacturers Standardization Society: Pipe Hangers and Supports - Selection and Application. G. NFPA 13 - Installation of Sprinkler Systems. 1.03 QUALITY ASSURANCE A. Hangers and supports used in fire protection piping systems shall be listed and labeled by Underwriters Laboratories. B. Steel pipe hangers and supports shall have the manufacturers name, part number, and applicable size stamped in the part itself for identification. C. Hangers and supports shall be designed and manufactured in conformance with MSS SP-58. D. Supports for sprinkler piping shall be in conformance with NFPA 13. 1.04 SUBMITTALS A. Submit product data on all hanger and support devices, including shields and attachment methods. Product data to include, but not limited to materials, finishes, approvals, load ratings, and dimensional information. Part II - PRODUCTS 2.01 ACCEPTABLE MANUFACTURERS A. Manufacturer: Subject to compliance with these specifications, pipe hanger and support systems shall be as manufactured by Cooper B-Line, Inc. 2.02 PIPE HANGERS AND SUPPORTS A. Hangers 1. Uninsulated pipes 2 inch and smaller: a. Adjustable steel swivel ring (band type) hanger, Cooper B-Line B3170. b. Adjustable steel swivel J-hanger, Cooper B-Line B3690. c. Malleable iron ring hanger, Cooper B-Line B3198R or hinged ring hanger, B3198H. d. Government type hanger, Cooper B-Line B3225 or B3226. e. Adjustable steel clevis hanger, Cooper B-Line B3104 or B3100. 18 Technical Data 2. Uninsulated pipes 21/2 inch and larger: a. Adjustable steel clevis hanger, Cooper B-Line B3100. b. Pipe roll with sockets, Cooper B-Line B3114. c. Adjustable steel yoke pipe roll, Cooper B-Line B3110. 3. Insulated pipe - Hot or steam piping: a. 2 inch and smaller pipes: use adjustable steel clevis with galvanized sheet metal shield, Cooper B-Line B3100 with B3151 or B3153 series. b. 21/2 inch and larger pipes: ii. Pipe roll with sockets with pipe covering protection saddle, Cooper B-Line B3114 with B3160 - B3165 series. 4. Insulated pipe - Cold or chilled water piping: a. 5 inch and smaller pipes: use adjustable steel clevis with galvanized sheet metal shield, Cooper B-Line B3100 with B3151 or B3153 series. b. 6 inch and larger pipes: i. Adjustable steel yoke pipe, Cooper B-Line B3110, with B3380CW - B3384CW calcium silicate shield. ii. Pipe roll with sockets, Cooper B-Line B3114, with B3380CW - B3384CW calcium silicate shield. B. PIPE CLAMPS 1. When flexibility in the hanger assembly is required due to horizontal movement, use pipe clamps with weldless eye nuts, Cooper B-Line B3140 or B3142 with B3200. For insulated lines use double bolted pipe clamps, Cooper B-Line B3144 or B3146 with B3200. C. MULTIPLE OR TRAPEZE HANGERS 1. Trapeze hangers shall be constructed from 12 gauge roll formed ASTM A 1011 SS Gr. 33 structural steel channel, 15/8” x 15/8” minimum, Cooper B-Line B22 strut or stronger as required. 2. Mount pipes to trapeze with two piece pipe straps sized for outside diameter of pipe, Cooper B-Line B2000 series. 3. For pipes subjected to axial movement: a. Strut mounted roller support, Cooper B-Line B3126. Use pipe protection shield or saddles on insulated lines. b. Strut mounted pipe guide, Cooper B-Line B2417. D. WALL SUPPORTS 1. Pipes 4 inch and smaller: a. Carbon steel hook, Cooper B-Line B3191. b. Carbon steel J-hanger, Cooper B-Line B3690. 2. Pipes larger than 4 inch: a. Welded strut bracket and pipe straps, Cooper B-Line B3064 and B2000 series. b. Welded steel brackets, Cooper B-Line B3066 or B3067, with roller chair or adjustable steel yoke pipe roll. Cooper B-Line B3120 or B3110. Use pipe protection shield or saddles on insulated lines. 19 Technical Data i. Adjustable steel yoke pipe roll with pipe covering protection saddle, Cooper B-Line B3110 with B3160 - B3165 series. Technical Data E. FLOOR SUPPORTS 1. Hot piping under 6 inch and all cold piping: a. Carbon steel adjustable pipe saddle and nipple attached to steel base stand sized for pipe elevation, Cooper B-Line B3093 and B3088T or B3090 and B3088. Pipe saddle shall be screwed or welded to appropriate base stand. 2. Hot piping 6 inch and larger: a. (Adjustable) Roller stand with base plate, Cooper B-Line B3117SL (or B3118SL). b. Adjustable roller support and steel support sized for elevation, Cooper B-Line B3124 F. VERTICAL SUPPORTS 1. Steel riser clamp sized to fit outside diameter of pipe, Cooper B-Line B3373 or B3374. Technical Data G. COPPER TUBING SUPPORTS 1. Hangers shall be sized to fit copper tubing outside diameters. a. Adjustable steel swivel ring (band type) hanger, Cooper B-Line B3170CT. b. Malleable iron ring hanger, Cooper B-Line B3198CT or hinged ring hanger B3198HCT. c. Government type hanger, Cooper B-Line B3225CT or B3226CT. d. Adjustable steel clevis hanger, Cooper B-Line B3104CT. H. PLASTIC PIPE SUPPORTS 1. V-bottom clevis hanger with galvanized 18 gauge continuous support channel, Cooper B-Line B3106 and B3106V, to form a continuous support system for plastic pipe or flexible tubing. I. SUPPLEMENTARY STRUCTURAL SUPPORTS 1. Design and fabricate supports using structural quality steel bolted framing materials as manufactured by Cooper B-Line. Channels shall be roll formed, 12 gauge ASTM A 1011 SS Grade 33 steel, 15/8” x 15/8” or greater as required by loading conditions. Submit designs for pipe tunnels, pipe galleries, etc., to engineer for approval. Use clamps and fittings designed for use with the strut system. 2.04 UPPER ATTACHMENTS A. BEAM CLAMPS 1. Beam clamps shall be used where piping is to be suspended from building steel. Clamp type shall be selected on the basis of load to be supported, and load configuration. 2. C-Clamps shall have locknuts and cup point set screws, Cooper B-Line B351L, or B3036L. Top flange C-clamps shall be used when attaching a hanger rod to the top flange of structural shapes, Cooper B-Line B3034 or B3033. Refer to manufacturers’ recommendation for setscrew torque. Retaining straps shall be used to maintain the clamp’s position on the beam where required. 3. Center loaded beam clamps shall be used where specified. Steel clamps shall be Cooper B-Line B3050 or B3055. Malleable iron or forged steel beam clamps with cross bolt shall be Cooper B-Line B3054 or B3291 - B3297 series as required to fit beams. B. CONCRETE INSERTS 1. Cast in place spot concrete inserts shall be used where applicable, either steel or malleable iron body, Cooper B-Line B2500 or B3014. Spot inserts shall allow for lateral adjustment and have means for attachment to forms. Select insert nuts to suit threaded hanger rod sizes, Cooper B-Line N2500 or B3014N series. 20 Technical Data 2. Continuous concrete inserts shall be used where applicable. Channels shall be 12 gauge, ASTM A 1011 SS Grade 33 structural quality carbon steel, complete with styrofoam inserts and end caps with nail holes for attachment to forms. The continuous concrete insert shall have a load rating of 2,000 lbs/ft. in concrete, Cooper B-Line B22I, B32I, or B52I (B52I is limited to 1,500 lbs/ft.). Select channel nuts suitable for strut and rod sizes. 2.05 VIBRATION ISOLATION AND SUPPORTS B. For larger tubing or piping subjected to vibration, use neoprene or spring hangers as required. C. For base mounted equipment use vibration pads, molded neoprene mounts, or spring mounts as required. D. Vibration isolation products as manufactured by Cooper B-Line, VibraTrol systems. 2.06 ACCESSORIES A. Hanger rods shall be threaded both ends, Cooper B-Line B3205, or continuous threaded rods of circular cross section. Use adjusting locknuts at upper attachments and hangers. No wire, chain, or perforated straps are allowed. B. Shields shall be 180° galvanized sheet metal, 12 inch minimum length, 18 gauge minimum thickness, designed to match outside diameter of the insulated pipe, Cooper B-Line B3151. C. Pipe protection saddles shall be formed from carbon steel, 1/8 inch minimum thickness, sized for insulation thickness. Saddles for pipe sizes greater than 12 inch shall have a center support rib. 2.07 FINISHES INDOOR FINISHES A. Hangers and clamps for support of bare copper piping shall be coated with copper colored epoxy paint, Cooper B-Line Dura-Copper. Additionally a plastic coating or a felt lining in hanger can be used. B. Hangers for other than bare copper pipe shall be zinc plated in accordance with ASTM B 633 - SC3 or shall have an electro-deposited green epoxy finish, Cooper B-Line Dura-Green. C. Strut channels shall be pre-galvanized in accordance with ASTM A 653 G90 or have an electro-deposited green epoxy finish, Cooper B-Line Dura-Green. OUTDOOR AND CORROSIVE AREA FINISHES D. Hangers and strut located outdoors shall be hot dip galvanized after fabrication in accordance with ASTM A 123. All hanger hardware shall be hot-dip galvanized or stainless steel. Zinc plated hardware is not acceptable for outdoor or corrosive use. E. Hangers and strut located in corrosive areas shall be Type 304 (316) stainless steel with stainless steel hardware. 21 Technical Data A. For refrigeration, air conditioning, hydraulic, pneumatic, and other vibrating system applications, use a clamp that has a vibration dampening insert and a nylon inserted locknut. For copper and steel tubing use Cooper B-Line BVT series VibraClamps, for pipe sizes use BVP series. Technical Data Part III - EXECUTION 3.01 PIPE HANGERS AND SUPPORTS A. Pipe shall be adequately supported by pipe hanger and supports specified in PART II PRODUCTS. Hangers for insulated pipes shall be sized to accommodate insulation thickness. B. Horizontal steel piping shall be supported in accordance with MSS SP-69 Tables 3 and 4, excerpts of which follow below: NOMINAL PIPE SIZE 3/8” Technical Data - 11/4” 11/2” 2” 1 2 /2” 3” 1 3 /2” 4” 5” 6” 8” 10” 12” 14” 16” ROD DIAMETER MAXIMUM SPACING 3/8” 7’-0” 9’-0” 10’-0” 11’-0” 12’-0” 13’-0” 14’-0” 16’-0” 17’-0” 19’-0” 22’-0” 23’-0” 25’-0” 27’-0” 3/8” 3/8” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4” 7/8” 7/8” 1” 1” C. Horizontal copper tubing shall be supported in accordance with MSS SP-69 Tables 3 and 4, excerpts of which follow below: NOMINAL PIPE SIZE 1/4” - 3/4” 1” 1 1 /4” 11/2” 2” 21/2” 3” 31/2” 4” 5” 6” 8” ROD DIAMETER MAXIMUM SPACING 3/8” 5’-0” 6’-0” 7’-0” 8’-0” 8’-0” 9’-0” 10’-0” 11’-0” 12’-0” 13’-0” 14’-0” 16’-0” 3/8” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 3/4” D. Provide means of preventing dissimilar metal contact such as plastic coated hangers, copper colored Cooper B-Line Dura-Copper epoxy paint, or non-adhesive isolation tape (Cooper B-Line Iso-Pipe). Galvanized felt isolators sized for copper tubing may also be used, Cooper B-Line B3195CT. 22 Technical Data E. Support horizontal cast iron pipe adjacent to each hub, with 10 feet maximum spacing between hangers. F. Install hangers to provide a minimum of 1/2 inch space between finished covering and adjacent work. G. Place a hanger within 12 inches of each horizontal elbow. I. Where several pipes can be installed in parallel and at the same elevation, provide trapeze hangers as specified in Section 2.02 C. Trapeze hangers shall be spaced according to the smallest pipe size, or install intermediate supports according to schedule in Section 3.01 B. J. Do not support piping from other pipes, ductwork or other equipment which is not building structure. 3.02 CONCRETE INSERTS A. Provide inserts for placement in formwork before concrete is poured. B. Provide inserts for suspending hangers from reinforced concrete slabs and sides of reinforced concrete beams. C. Where concrete slabs form finished ceilings, provide inserts to be flush with slab surface. D. Provide hooked rod to concrete reinforcement section for inserts carrying pipe over 4 inch. 23 Technical Data H. Support vertical piping independently of connected horizontal piping. Support vertical pipes at every (other) floor. Wherever possible, locate riser clamps directly below pipe couplings or shear lugs. Beam Clamps Beam Clamps Beam clamps offered in this section are designed to provide attachment of hanger rods to structural members without drilling or welding. A wide range of types and sizes are available for various applications. Materials Carbon Steel, Malleable Iron and Forged Steel are used in the manufacturing of beam clamps and accessories. Stainless steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Plated Zinc (ASTM B 633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A 123), Red Primer, Plastic Coating and Dura-Green®. Other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, copper plated, or in stainless steel. Recommended Setscrew Torque (unless otherwise specified) 1/4”-20 3/8”-16 1/2”-13 5/8”-11 3/4”-10 4 ft/lbs (5 Nm) 5 ft/lbs (7 Nm) 11 ft/lbs (15 Nm) 21 ft/lbs (28 Nm) 34 ft/lbs (46 Nm) Over torqued setscrews will damage beam clamps in this section. We are aware that torque wrenches are not used or not available in many instances. In the absence of a torque wrench, the setscrew should be finger tightened to the I-beam and then an additional 1/4 to 1/2 turn applied to the setscrew. Approvals (as noted) Items in this section are Underwriters' Laboratories Listed and comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society MSS SP-69 & SP-58. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 24 Beam Clamps Material: Steel (Stainless Steel Type 304 available 3/8" thru 5/8" rod sizes) Setscrew and Locknut Included 'D' Standard Finish: Plain or Electro-Plated Service: Designed for attaching a hanger rod to the flange of a beam. 'B' 'A' (Rod Size) Hanger Rod Not Included Ordering: Specify part number and finish. When Retaining Strap is required, order B3362 thru B3365 separately. See page 26. 'C' Approvals: B351L (3/8” - 3/4”), is Underwriters' Laboratories Listed. Complies with Federal Specification WW-H-171E & A-A-1192A Type 23 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 23. Figure B351L Steel C-Clamp With Locknut Rod Size 'A' Design Load 'B' 'C' B351L-3/8 3/8"-16 23/8" (60.3) 23/8" B351L-1/2 1/2"-13 23/8" (60.3) 23/8" B351L-5/8 5/8"-11 23/8" (60.3) B351L-3/4 3/4"-10 23/8" B351L-7/8 7/8"-9 3" 'D' Lbs. kN Maximum Iron Pipe Size Per UL Wt./C Lbs. kg (60.3) 3/4" (19.0) 300 (0.89) 4" (100) 41 (18.6) (60.3) 3/4" (19.0) 380 (1.69) 4" (100) 41 (18.6) 21/4" (57.1) 3/4" (19.0) 550 (2.44) 6" (150) 60 (27.2) (60.3) 21/4" (57.1) 3/4" (19.0) 630 (2.80) 6" (150) 71 (32.2) (76.2) 31/4" (82.5) 1" (25.4) 1200 (5.34) -- -- 184 (83.4) Note: See page 24 for recommended setscrew torque. Material: Malleable Iron Setscrew and Locknut Included Standard Finish: Plain or Electro-Plated 3/4" (19.0) 'A' (Rod Size) Hanger Rod Not Included Service: Designed for attaching a hanger rod to the flange of a beam. 'B' Ordering: Specify part number and finish. When Retaining Strap is required, order B3362 thru B3365 separately. See page 26. Approvals: B3036L is Underwriters' Laboratories Listed. Complies with Federal Specification WW-H-171E & A-A-1192A Type 23 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 23. 'C' Figure B3036L Malleable Iron C-Clamp With Locknut Part No. Rod Size 'A' Design Load 'B' B3036L-3/8 3/8"-16 13/4" B3036L-1/2 1/2"-13 B3036L-5/8 B3036L-3/4 'C' Lbs. kN Maximum Iron Pipe Size Per UL Wt./C Lbs. kg (44.4) 13/4" (44.4) 300 (0.89) 4" (100) 41 (18.6) 13/4" (44.4) 13/4" (44.4) 380 (1.69) 5" (125) 41 (18.6) 5/8"-11 2" (50.8) 17/8" (47.6) 530 (2.36) 6" (150) 60 (27.2) 3/4"-10 2" (50.8) 2" (50.8) 530 (2.36) 6" (150) 71 (32.2) Note: See page 24 for recommended setscrew torque. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 25 Beam Clamps Part No. Beam Clamps 'B' 3/4" Material: Steel (Stainless Steel available) (19.0) Standard Finish: Pre-Galvanized Service: Designed for use with B351L and B3036L C-Clamps. Ordering: Specify part number, length 'L', (add 1" (25.4) minimum to flange width), and finish. 'L' Material Thickness 12 Gauge (2.7) Note: Requires field forming on beam. 'A' Figure B3362, B3363, B3364, B3365 Retaining Strap Part No. 6" (152.4) For Use With B3362 B351L-3/8 & 1/2 11/4" (31.7) 7/16" B3363 B351L-5/8 & 3/4, B3036L-3/8 & 1/2 11/4" (31.7) B3364 B3036L-5/8 & 3/4 11/4" B3365 B351L-7/8 11/2" 'A' 'B' Lbs. kg (11.1) 27 (12.2) 5/8" (15.9) 26 (31.7) 11/16" (17.4) (38.1) 3/4" (19.0) Wt./C for Length 'L' of 8" (203.2) 10" (254.0) Lbs. 12" (304.8) kg Lbs. kg Lbs. kg 35 (15.9) 44 (19.9) 52 (23.6) (11.8) 35 (15.9) 43 (19.5) 52 (23.6) 26 (11.8) 35 (15.9) 43 (19.5) 52 (23.6) 32 (14.5) 42 (19.0) 52 (23.6) 62 (28.1) Beam Clamps Material: Malleable Iron Setscrew and Locknut Included 3" Standard Finish: Plain or Electro-Plated (76.2) Service: Designed for attaching a 3/8"-16 hanger rod to the bottom flange of a Z-purlin. Ordering: Specify part number and finish. 313/32" Weight: Wt./C 90 Lbs. (40.8 kg) (86.5) Design Load: 400 Lbs. (1.78 kN) Throat Opening 31/32" (24.6) Approvals: Underwriters' Laboratories Listed. Complies with Federal Specification WW-H-171E & A-A-1192A Type 23 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 23. Bottom Hanger Rod Threads 3/8"-16 Figure B3037 Z-Purlin Malleable C-Clamp Note: See page 24 for recommended setscrew torque. 3/4" Material: Malleable Iron (19.0) Standard Finish: Plain or Electro-Plated 17/8" 11/2" Service: Designed for attaching a 3/8"-16 hanger rod to the top or bottom flange of a beam or bar joist when setscrew is in the down position as shown. (47.6) (38.1) Ordering: Specify part number and finish. When Retaining Strap is required, order B3367 separately. See Page 30. Throat Opening 11/16" (17.5) Setscrew and Locknut Included Approvals: Underwriters' Laboratories Listed. Complies with Federal Specification WW-H-171E & A-A-1192A Type 19 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 19. Hanger Rod Not Included Figure B3031-3/8 Light Duty Malleable C-Clamp Weight: Wt./C 25 Lbs. (11.3 kg) Design Load: 350 Lbs. (1.55 kN) Note: See page 24 for recommended setscrew torque. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 26 Beam Clamps Material: Ductile Iron 'D' 'C' Standard Finish: Plain or Electro-Plated screw with Hot-Dipped Galvanized clamp Service: Designed for attaching a hanger rod to the top or bottom flange of a bar joist or other structural shapes. 'B' Throat Opening 11/4" (31.7) for B3033-3/8 & 1/2 15/16" (83.3) for B3033-5/8 & 3/4 'A' (Rod Size) Hanger Rod Not Included Note: Installation of C-Clamp other than shown below is not recommended. Ordering: Specify part number and finish. When Retaining Strap is required, order B3367 separately. See page 30. Setscrew and Locknut Included Approvals: Underwriters' Laboratories Listed. Complies with Federal Specification WW-H-171E Type 19 & A-A-1192A Type 19 & 23 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 19 & 23. Beam Clamps Top Flange Attachment Applications Bottom Flange Attachment Applications Figure B3033 Wide Jaw Reversible C-Clamp Part No. Rod Size 'A' Design Load 'B' 'C' B3033-3/8 3/8"-16 21/4" (57.1) 2" B3033-1/2 1/2"-13 25/16" (58.7) 23/16" B3033-5/8 5/8"-11 25/8" (66.7) B3033-3/4 3/4"-10 211/16" (68.3) 'D' Lbs. kN Maximum Iron Pipe Size Per UL Wt./C Lbs. kg (50.8) 11/8" (28.6) 500 (2.22) 4" (100) 54 (24.5) (55.6) 11/4" (31.7) 810 (3.60) 8" (200) 51 (23.1) 21/2" (63.5) 13/8" (34.9) 1000 (4.44) 8" (200) 70 (31.7) 21/2" (63.5) 17/16" (36.5) 1400 (6.23) 10" (250) 98 (44.4) Note: See page 24 for recommended setscrew torque. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 27 Beam Clamps B3034-3/8" and B3034-1/2" sizes Attach only as shown. Material: Ductile Iron for 3/8” & 1/2” sizes Malleable Iron for 5/8” & 3/4” sizes Standard Finish: Plain or Electro-Plated screw with Hot-Dipped Galvanized clamp Service: Designed for attaching a hanger rod to the top or bottom flange (for their respective sizes) of a bar joist or other structural shapes. Note: Installation of C-Clamps (for their respective sizes) other than shown is not recommended. 'D' 'C' 'B' Throat Opening 3/4" (19.0) Ordering: Specify part number and finish. When Retaining Strap is required, order B3367 separately. See page 30. 'A' (Rod Size) Hanger Rod Not Included Approvals: Underwriters' Laboratories Listed (3/8” and 1/2”only). Complies with Federal Specification WW-H-171E Type 19 & A-A-1192A Type 19 & 23 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 19 & 23. Setscrew and Locknut Included Top Flange Attachment Applications Beam Clamps B3034-5/8" and B3034-3/4" sizes Attach only as shown. 'C' 'D' Bottom Flange Attachment Applications 'B' Throat Opening 3/4" (19.0) 'A' (Rod Size) Hanger Rod Not Included Setscrew and Locknut Included Figure B3034 C-Clamp Part No. Rod Size 'A' B3034-3/8 3/8"-16 B3034-1/2 1/2"-13 B3034-5/8 5/8"-11 B3034-3/4 3/4"-10 Design Load 'B' 15/8" 2" 'D' Lbs. kN (19.0) 560 (2.49) 4" 23/16" (55.6) 13/16" (30.2) 810 (3.60) (44.5) 21/8" (54.0) 11/4" (31.7) 1000 (50.8) 21/4" (57.2) 11/4" (31.7) 1500 (41.3) 113/16" (46.0) 13/4" 'C' Maximum Iron Pipe Size Per UL 2" (50.8) 7/8" Wt./C Lbs. kg (100) 30 (13.6) 8" (200) 47 (21.3) (4.45) -- -- 58 (26.3) (6.67) -- -- 77 (35.0) Note: See page 24 for recommended setscrew torque. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 28 Beam Clamps Material: Steel Setscrew Included Standard Finish: Electro-Plated or Hot-Dip Galvanized 'T' Service: Designed for attaching a hanger rod to the flange of a beam. 11/8" (28.6) Ordering: Specify part number and finish. When Retaining Strap is required, order B312 separately. See page 30. 'C' Recommended Setscrew Torque: 3/8”-16 = 150 in-lbs (16.9 N•m) 1/2”-13 = 350 in-lbs (39.5 N•m) 'A' 21/2" (63.5) Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 19 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 19. Figure B303-B309 Beam Clamps Part No. Rod Size ‘A’ Setscrew Size Design Load B303 1/4”-20 3/8”-16 25/16" (58.7) 11 Ga. (3.0) 400 (1.78) 72 (32.6) B304 5/16”-18 3/8”-16 25/16" (58.7) 11 Ga. (3.0) 600 (2.67) 72 (32.6) B305 3/8”-16 3/8”-16 25/16" (58.7) 11 Ga. (3.0) 600 (2.67) 72 (32.6) B306 3/8”-16 1/2”-13 27/16" (61.9) 7 Ga. (4.5) 1100 (4.89) 97 (44.0) B307 1/2”-13 1/2”-13 27/16" (61.9) 7 Ga. (4.5) 1100 (4.89) 97 (44.0) B308 1/2”-13 1/2”-13 29/16" (65.1) 1/4" (6.3) 1500 (6.67) 133 (60.3) B309 5/8”-11 1/2”-13 29/16" (65.1) 1/4" (6.3) 1500 (6.67) 133 (60.3) 'C' 'T' Lbs. kN Wt./C Lbs. kg Material: Steel Setscrew Included Standard Finish: Electro-Plated or Hot-Dip Galvanized 15/8" (41.3) 'T' Service: Designed for attaching a hanger rod to the flange of a beam. 111/16" (42.8) Maximum Flange Thickness Ordering: Specify part number and finish. When Retaining Strap is required, order B312 separately. See page 30. 'C' Recommended Setscrew Torque: 1/2”-13 = 350 in-lbs (39.5 N•m) 5/8”-11 = 700 in-lbs (79.0 N•m) 31/4" (82.5) Minimum Flange Thickness: For B321-1 thru B321-3 = 3/8” (9.5) For B321-4 & B321-5 = 5/8” (15.9) 'A' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 19 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 19. Figure B321 Series Beam Clamps Part No. Rod Size ‘A’ Setscrew Size Design Load B321-1 3/8”-16 1/2”-13 39/16" (92.1) 1/4" (6.3) 1300 (5.78) 187 (84.8) B321-2 1/2”-13 1/2”-13 39/16" (92.1) 1/4" (6.3) 1400 (6.23) 186 (84.3) B321-3 5/8”-11 1/2”-13 39/16" (92.1) 1/4" (6.3) 1600 (7.12) 185 (83.9) B321-4 5/8”-11 5/8”-11 323/32" (94.4) 5/16" (7.9) 1800 (8.00) 239 (108.4) B321-5 3/4”-10 5/8”-11 323/32" (94.4) 5/16" (7.9) 2000 (8.89) 238 (107.9) 'C' 'T' Lbs. kN Wt./C Lbs. kg All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 29 Beam Clamps 7/8" (22.2) Maximum Flange Thickness Beam Clamps 'B' Dia. Material Thickness 11 Gauge (3.0) Material: Steel Standard Finish: Pre-Galvanized Service: Designed for use with B3031, B3033, and B3034 C-Clamps. Ordering: Specify part number, length 'L', (add 2" (50.8) minimum to flange width), and finish. Note: Requires field forming on beam. 'L' 'A' Figure B3367 Retaining Straps Part No. 6" (152.4) For Use With 'A' B3367-3/8 B3033-3/8, B3034-3/8 & B3031-3/8 B3033-1/2 B3367-1/2 & B3034-1/2 'B' Wt./C for Length 'L' of 8" (203.2) 10" (254.0) 12" (304.8) Lbs. kg Lbs. kg Lbs. kg Lbs. kg 11/4" (31.7) 7/16" (11.1) 26 (11.8) 35 (15.9) 44 (19.9) 61 (27.6) 11/4" 9/16" (14.3) 25 (11.3) 34 (15.4) 43 (19.5) 60 (27.2) (31.7) B3367-5/8 B3033-5/8 & B3034-5/8 11/4" (31.7) 11/16" (17.5) 24 (10.9) 33 (14.9) 42 (19.0) 59 (26.7) B3367-3/4 B3033-3/4 & B3034-3/4 11/4" (31.7) 13/16" (20.6) 23 (10.4) 32 (14.5) 41 (18.6) 58 (26.3) Material Thickness 14 Gauge (1.9) Material: Steel 13/4" Standard Finish: Pre-Galvanized (44.4) 'L' Service: Designed for use with B303-B309 and B321 beam clamps. 1/2" Beam Clamps 11/4" Ordering: Specify part number and finish. (12.7) (31.7) 1/4" (6.3) Figure B312 Retaining Straps Part No. Wt./C For Flange With 'L' Lbs. kg B312-6 6" (152.4) 9" (228.6) 22 (10.0) B312-9 9" (228.6) 12" (304.8) 30 (13.6) B312-12 12" (304.8) 15" (381.0) 40 (18.1) B312-15 15" (381.0) 18" (457.2) 49 (22.2) J-Hook and Hex Nut Included Notes: Maximum beam thickness 3/4” (19.0). For thicker beams step up one flange width size. Requires field forming on beam. Material: Steel Standard Finish: Plain or Electro-Plated 'B' 'C' Center of J-Hook to bottom of clamp body. Service: Designed for attaching rod under a beam flange. Adjustable for 4" (101.6) to 8" (203.2) flange widths. Maximum flange thickness 3/4" (19.0). 'A' Ordering: Specify part number and finish. 'A' (Rod Size) Hanger Rod Not Included Approvals: Complies with Federal Specification WW-H-171E Type 54 & A-A-1192A Type 27 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 27. Steel Size 'C' Figure B3040 Adjustable Beam Clamp Part No. Rod Size 'A' Design Load B3040-3/8 3/8"-16 23/4" B3040-1/2 1/2"-13 23/4" B3040-5/8 5/8"-11 B3040-3/4 3/4"-10 'B' 'C' (69.8) 113/16" (69.8) 13/4" 3" (76.2) 13/4" 33/8" (85.7) 17/8" Steel Size Wt./C Lbs. kN Lbs. kg (46.0) 1/4" x 11/4" (6.3 x 31.7) 300 (1.33) 120 (54.4) (44.4) 1/4" x 11/2" (6.3 x 38.1) 700 (3.11) 160 (72.6) (44.4) 1/4" x 13/4" (6.3 x 44.4) 1000 (4.45) 216 (98.0) (47.6) 3/8" x 21/2" (9.5 x 63.5) 1800 (8.00) 442 (200.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 30 Beam Clamps Material: Steel Standard Finish: Plain or Electro-Plated Service: Designed for attaching a hanger rod to be centered under beam flanges. 2" (50.8) vertical adjustment is provided in the clamp. Steel Size Ordering: Specify part number, flange width, and finish. Bolt and Nut Included 'W' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 21 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 21. 'C' 'B' NOTE: Slots on bottom portions of clamp halves allow 1” (25.4) adjustment for variance in flange widths Note: Box Style Furnished For B3055-3/8 x 2" B3055-3/8 x 3" B3055-3/8 x 4" B3055-1/2 x 2" B3055-1/2 x 3" B3055-1/2 x 4" B3055-5/8 x 2" B3055-5/8 x 3" B3055-5/8 x 4" B3055-3/4 x 2" B3055-3/4 x 3" B3055-3/4 x 4" B3055-7/8 x 3" B3055-7/8 x 4" B3055-7/8 x 5" B3055-1 x 3" B3055-1 x 4" B3055-1 x 5" B3055-1 x 6" B3055-11/8 x 4" B3055-11/8 x 5" B3055-11/8 x 6" B3055-11/8 x 7" B3055-11/4 x 4" B3055-11/4 x 5" B3055-11/4 x 6" B3055-11/4 x 7" 'W' 'C' 'B' 'B' Center of cross bolt to bottom of side of hanger rod nut. 'A' (Rod Size) Hanger Rod Not Included Figure B3055 Steel Beam Clamp Part No. Rod Size 'A' B3055-3/8 3/8"-16 B3055-1/2 1/2"-13 3" B3055-5/8 5/8"-11 31/4" B3055-3/4 3/4"-10 31/4" B3055-7/8 7/8"-9 31/2" (88.9) 1"-8 31/2" (88.9) B3055-1 Design Load 'B' 3" Steel Size Lbs. kN (101.6) 1/4" x 11/4" (6.3 x 31.7) 550 (2.44) (101.6) 1/4" x 11/2" (6.3 x 38.1) 850 (3.78) (114.3) 3/8" x 11/2" (9.5 x 38.1) 1100 (4.89) (114.3) 3/8" x 2" (9.5 x 50.8) 1500 (6.67) 5" (127.0) 1/2" x 2" (12.7 x 50.8) 2600 (11.56) 51/2" (139.7) x 21/2" (12.7 x 63.5) 4300 (19.12) (76.2) 4" (76.2) 4" (82.5) 41/2" (82.5) 41/2" 1/2" Approximate Wt./C For Beam Clamp Size Lbs. (kg) Flange Width 'W' 'C' 3 B3055- /8" B3055-1/2" B3055-5/8" B3055-3/3" B3055-7/8" B3055-1" 4" (101.6) 168 (76.2) 201 (91.2) 328 (148.8) 434 (196.8) 657 (298.0) 797 (361.5) 5" (127.0) 181 (82.1) 217 (98.4) 352 (159.6) 466 (211.4) 667 (302.5) 824 (373.7) 6" (152.4) 193 (87.5) 231 (104.8) 373 (169.2) 495 (224.5) 705 (319.8) 877 (397.8) 7" (177.8) 205 (93.0) 246 (111.6) 395 (179.2) 525 (238.1) 744 (337.5) 926 (420.0) 8" (203.2) 214 (97.1) 256 (116.1) 411 (186.4) 546 (247.6) 773 (350.6) 962 (436.3) 10" (254.0) 235 (106.6) 282 (127.9) 449 (203.6) 596 (270.3) 840 (381.0) 1046 (474.4) 12" (304.8) 259 (117.5) 311 (141.0) 493 (223.6) 655 (297.1) 918 (416.4) 1143 (518.4) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 31 Beam Clamps 'A' (Rod Size) Hanger Rod Not Included Steel Size Beam Clamps Material: Steel Standard Finish: Plain or Electro-Plated 'A' Center of bolt to bottom of beam flange. Steel Size Service: Designed for attaching hanger rods centered under beam flanges. Recommended to use with B3200 Series up to size 11/2" (38.1). Ordering: Specify part number, flange width, and finish. 'A' 'W' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 21 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 21. 'C' Bolt Size 'B' Bolt and Nut Included Part Number Example: B3050-2 x 'W' finish Figure B3050 Beam Clamp Beam Clamps Part No. & Size Bolt Size B3050-2 1/2"-13 13/8" B3050-5 3/4"-10 17/8" 'A' 'B' Minimum (34.9) 5/8" (47.6) 7/8" (15.9) (22.2) Flange Thickness Flange Width 'W' Min. Design Load 'C' 21/8" 3" Steel Size Lbs. (54.0) (6.3 x 31.7) 1000 (3.11) (76.2) 1/2" x 2" (12.7 x 50.8) 3000 (6.67) Wt./C For Beam Clamp Size Max. 2 5 lbs. kg lbs. kg (101.6) 3/16" (127.0) 5/16" (152.4) 1/4" (177.8) 7/16" (11.1) 7/8" (22.2) 143 (64.9) 514 (233.2) (203.2) 7/16" (11.1) 7/8" (22.2) 152 (69.0) 543 (246.3) 9" (228.6) 9/16" (14.3) 1" (25.4) 160 (72.6) 571 (259.0) 10" (254.0) 5/8" (15.9) 1" (25.4) 169 (76.7) 599 (271.8) 12" (304.8) 5/8" (15.9) 11/4" (31.7) 187 (84.8) 656 (297.6) 4" 5" 6" 7" 8" kN 1/4" x 11/4" (4.8) 1/2" (12.7) 116 (52.6) 429 (194.6) (7.9) 5/8" (15.9) 125 (56.7) 458 (207.8) (6.3) 3/4" (19.0) 134 (60.8) 486 (220.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 32 Beam Clamps Material: Malleable Iron Clamping Rod and Nuts Included Standard Finish: Plain or Electro-Plated Service: Designed for attaching a hanger rod to the bottom flange of a beam. Adjustable for flange widths of 3" (76.2) to 7" (177.8) and a flange thickness of no greater than 5/8" (15.9). 'E' Rod Take-Out Ordering: Specify part number and finish Approvals: Underwriters' Laboratories Listed. Complies with Federal Specification WW-H-171E & AA-1192A Type 30 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 30. 'E' Beam Clamps 'A' (Rod Size) Hanger Rod Not Included Figure B3054 Malleable Iron Beam Clamp (Available without extension piece as B3054). Part No. 'A' Rod Size B3054-3/8 3/8"-16 Rod Take Out 'E' For Beam Flange Width Of 3" (76.2) 411/16" 4" (101.6) 5" (127.0) 6" (152.4) 7" (177.8) (119.1) 49/16" (115.9) 45/8" (117.5) 4" (101.6) 31/8" (79.4) (114.3) 45/16" (109.5) 315/16" (100.0) 31/4" (82.5) B3054-1/2 1/2"-13 413/16" (122.2) 41/2" B3054-5/8 5/8"-11 47/8" (123.8) 45/8" (117.5) 43/8" (111.1) 33/4" (95.2) 35/16" (84.1) B3054-3/4 3/4"-10 51/8" (130.2) 5" (127.0) 45/8" (117.5) 41/4" (107.9) 33/4" (95.2) B3054-7/8 7/8"-9 53/16" (131.8) 47/8" (123.8) 411/16" (119.1) 45/16" (109.5) 33/4" (95.2) Design Load Maximum Iron Pipe Size Per UL Part No. Lbs. kN B3054-3/8 730 (3.25) 4” B3054-1/2 1350 (6.00) B3054-5/8 1365 B3054-3/4 B3054-7/8 Wt./C Lbs. kg (100) 236 (107.0) 8” (200) 254 (115.2) (6.07) 10” (250) 260 (117.9) 1365 (6.07) 10” (250) 278 (126.1) 1365 (6.07) 10” (250) 292 (132.4) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 33 Beam Clamps 'C' Material: Forged Steel 'C' Standard Finish: Plain or Electro-Plated Service: Designed for attaching a hanger rod to the bottom flange of a beam. Adjustable from flange widths of 3" (76.2) to 15" (381.0 ). and flange thickness of no greater than 11/32" (26.2). 'E' 'B' 'E' Ordering: Specify part number, rod size and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A (Type 28 without links; Type 29 with links,) and MSS SP-69 & SP-58 (Type 28 without links; Type 29 with links). 'A' 'B' 'A' With Links Without Links Note: Design load for B3291 thru B3295 based on maximum rod size shown. Use the appropriate all threaded rod design load shown on page 242 for sizes less than maximum. Figure B3291, B3292, B3293, B3294, B3295, B3296, B3297, B3298 UFS Beam Clamp With Weldless Eye Nut Beam Clamps Available with left hand threads by adding an L to part number Example: B3291L-* Part No. *Rod Size Maximum Beam Flange Thickness In. mm B3291-* .60 (15.2) B3292-* .60 (15.2) B3293-*∆ .60 (15.2) Rod Size 'A' (Specify) * Design Load 'B' 3/8"-16, 1/2"-13, 11/4" 5/8"-11, 3/4"-10 7/8"-9, 1"-8 3/8"-16, 1/2"-13, 5/8"-11, 3/4"-10, 7/8"-9, 'C' Wt./C Lbs. kN Lbs. kg 390 (176.9) (31.7) 11/8" (28.6) 3230 (14.36) 111/16" (42.9) 11/8" (28.6) 5900 (26.24) 915 (415.0) 111/16" (42.9) 11/8" (28.6) 5900 (26.24) 1300 (589.6) (982.0) 1"-8 B3294-* 1.031 (26.2) 7/8"-9, 1"-8 11/2" (38.1) 11/8" (28.6) 5900 (26.24) 2165 B3295-*∆ 1.031 (26.2) 7/8"-9, 1"-8 11/2" (38.1) 5900 (26.24) 3385 (1535.4) B3296-* 1.031 (26.2) 21/8" (54.0) 11/8" (28.6) 11/8" (28.6) 11500 (51.15) 2390 (1084.1) B3297-*∆ 1.031 (26.2) 21/8" (54.0) 11/8" (28.6) 11500 (51.15) 3575 (1621.6) (115.9) 11/8" (51.15) 3675 (1666.9) B3298-* 1.031 (26.2) 1"-8, 11/8"-7, 11/4"-7, 11/2"-6 1 1 /8"-7, 11/4"-7, 11/2"-6 13/4"-5, 2"-41/2 49/16" (28.6) 11500 'E' Rod Take-Out For Flange Width Part No. 3" 4" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" B3291-* 41/2" 55/16" 41/16" 35/8" 27/8" -- -- -- -- -- -- -- -- B3292-* -- 43/4" 47/16" 41/16" 33/8" -- -- -- -- -- -- -- -- 6" 55/16" 5" -- -- -- -- -- 57/8" 53/8" 413/16" -- -- -- -- -- 81/8" 73/4" 71/8" 65/8" 61/16" B3293-* ∆ B3294-* B3295-* ∆ -- -- -- -- 515/16" -- 613/16" 65/8" 63/8" 57/8" -- -- -- -- -- -- -- -- B3296-* -- 73/16" 7" 63/4" 61/4" 65/16" 513/16" 53/16" -- -- -- -- -- B3297-* ∆ -- -- -- -- -- -- -- -- 81/2" 81/8" 71/2" 7" 67/16" B3298-* -- 83/8" 87/16" 83/16" 73/4" 73/4" 71/4" 65/8" -- -- -- -- -- To determine (mm) in the above chart, multiply inches by 25.4. * Rod Size required to finish part number (see Rod Size 'A' in top chart). ∆ These part numbers are furnished with links. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 34 Beam Clamps Material: Steel Steel Size Standard Finish: Plain or Electro Plated 'A' (Rod Size) Hanger Rod Not Included Service: Designed for attaching hanger rod to the top flange of a beam. 'W' Ordering: Specify part number flange width, flange thickness and finish. Allows 1/8" (3.2) clearance between hanger rod and flange of beam. Figure B3042 Top Beam Hook Part No. For Nominal Pipe Size 'A' Design Load Lbs. kN B3042-3/8 3/8"-16 3/4-2 (20-50) 300 (1.33) B3042-1/2 1/2"-13 21/2-31/2 (65-90) 500 (2.22) Part No. Approximate Wt./C Lbs. (kg) For Width of Beam Flange 'W' 6" (152.4) 8" (203.2) 4" (101.6) 12" (304.8) 47 (21.3) 62 (28.1) 72 (32.6) 108 (49.0) B3042-1/2 65 (29.5) 86 (39.0) 105 (47.6) 146 (66.2) 'A' Beam Clamps B3042-3/8 Material: Steel Bolt and Nut Included Standard Finish: Plain or Electro Plated Steel Size Service: Designed for attaching hanger rod to the side of a beam flange. Works on top or bottom of beam. 'A' (Rod Size) Hanger Rod Not Included 'B' Ordering: Specify part number, flange width, and finish. Allows 1/8" (3.2) clearance between hanger rod and flange of beam. 'W' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 53 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 25. Figure B3045 Side Beam Clamp For Nominal Pipe Size Design Load Part No. 'A' B3045-3/8 3/8"-16 3/4-2 (20-50) 31/8" (79.4) 3/16" B3045-1/2 1/2"-13 21/2-31/2 (65-90) 31/8" (79.4) 1/4" B3045-5/8 5/8"-11 4-5 (100-125) 31/8" (79.4) 3/8" Flange Width 'W' Flange Thickness Minimum Maximum 3" (76.2) 1/4" (6.3) 3/8" 4" (101.6) 3/16" (4.8) 1/2" 5" (127.0) 5/16" (7.9) 5/8" 6" (152.4) 1/4" (6.3) 3/4" (177.8) 7/16" 8" (203.2) 7/16" 9" (228.6) 9/16" 7" 'B' Steel Size x 11/4" x 11/4" x 11/2" Lbs. kN (4.8 x 31.7) 300 (1.33) (6.3 x 31.7) 500 (2.22) (9.5 x 38.1) 700 (3.11) B3045-3/8 Wt./C For Side Beam Clamp Size Lbs. (kg) B3045-1/2 B3045-5/8 B3045-3/4 B3045-7/8 (9.5) 92 (41.7) 125 (56.7) 245 (111.1) 322 (146.0) 576 (261.3) (12.7) 100 (45.3) 141 (63.9) 267 (121.1) 353 (160.1) 618 (280.3) (15.9) 110 (49.9) 152 (68.9) 289 (131.1) 385 (174.6) 675 (306.2) (19.0) 119 (54.0) 164 (74.4) 309 (140.1) 412 (186.9) 718 (325.7) (11.1) 7/8" (22.2) 128 (58.0) 175 (79.4) 327 (148.3) 443 (200.9) 742 (336.6) (11.1) 7/8" (22.2) 134 (60.8) 182 (82.5) 345 (156.5) 462 (209.5) 798 (362.0) (14.3) 1" (25.4) 143 (64.8) 198 (89.8) 368 (166.9) 491 (222.7) 848 (384.6) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 35 Beam Clamps Material: Steel 2" (50.8) Standard Finish: Electro-Plated or Hot-Dip Galvanized 1/2" (12.7) Service: Designed for attachment to trus joist beams. Use with B3210 Series eye rods. Ordering: Specify part number and finish. ‘B’ ‘C’ ‘A’ Hardware Included 3/4" 3/8" (19.0) (9.5) Material Thickness 11 Gauge (3.0) Figure B3052 Trus Joist Beam Clamp Beam Clamps Part No. Hardware Size Design Load B3052-1 3/8”-16 39/16" B3052-2 3/8”-16 B3052-3 ‘A’ 'B' (90.5) 19/16" 39/16" 3/8”-16 B3052-4 'C' Wt./C Lbs. kN Lbs. kg (39.7) 19/16" (39.7) 250 (1.11) 68 (30.8) (90.5) 19/16" (39.7) 113/16" (46.0) 250 (1.11) 72 (32.6) 39/16" (90.5) 19/16" (39.7) 23/8" (60.3) 250 (1.11) 80 (36.3) 3/8”-16 39/16" (90.5) 19/16" (39.7) 219/32" (65.9) 250 (1.11) 83 (37.6) B3052-5 1/2”-13 39/16" (90.5) 19/16" (39.7) 39/16" (90.5) 250 (1.11) 105 (47.6) B3052-6 1/2”-13 313/16" (96.8) 113/16" (46.0) 23/8" (60.3) 250 (1.11) 92 (41.7) B3052-7 1/2”-13 313/16" (92.1) 113/16" (46.0) 39/16" (90.5) 250 (1.11) 108 (49.0) B3052-8 1/2”-13 39/16" (92.1) 19/16" (39.7) 413/16" (122.2) 250 (1.11) 120 (54.4) B3052-9 1/2”-13 39/16" (92.1) 19/16" (39.7) 59/16" (141.3) 250 (1.11) 130 (58.9) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 36 Beam Clamps Beam Clamps All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 37 Pipe Hangers Pipe Hangers Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials Carbon Steel, Malleable Iron and AISI Type 304 & 316 Stainless Steel are used in the manufacturing of pipe hangers. Other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black, Electro-Plated Zinc (ASTM B 633 SC3), Pre-Galvanized (ASTM A 653 G90), Hot-Dip Galvanized After Fabrication (ASTM A123), Red Primer, Plastic Coating, Dura-Green®, Dura-Copper® and other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes i.e. Hot-Dip Galvanized, Dura Green®, Dura Copper®, PVC etc. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, Dura Copper® Painted or Stainless Steel. Consult B-Line Systems for availability. Approvals (as noted) Items in this section are Underwriters Laboratories Listed, comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers' Standardization Society MSS SP-69 & SP-58. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 38 Pipe Hangers 'A' (Rod Size) Hanger Rod Not Included 'B' Center of pipe to top of hanger. 'C' 'B' 'E' Dia. Material: Steel Standard Finish: Electro-Plated (Hot-Dip Galvanized available with Electro-Plated hardware) 'D' Rod Take-Out Center of pipe to bottom of hanger rod. Service: Designed for suspending insulated pipe (with shield) and non-insulated pipe allowing for vertical adjustment. Side hole permits wall mounting. 'D' Ordering: Specify part number and finish. Bolt Size Approvals: Complies with Federal Specification A-A-1192A Type 5 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 5. Bolt and Nut Included B3690F B3690C Figure B3690 Adjustable "J" Hanger (Available with plastic coating as B3690C-size or felt lined as B3690F-Size) Nominal Pipe Size Rod Size 'A' 'B' B3690-1/2 1/2" (15) 3/8"-16 23/32" B3690-3/4 3/4" (20) 3/8"-16 211/32" (59.5) 1" (25) 3/8"-16 219/32" (65.9) 213/16" B3690-1 Rod Take Out 'D' 'C' (25.4) 111/16" (42.5) 13/32" (10.3) 1" (25.4) 113/16" (46.2) 13/32" (10.3) 1" (25.4) 115/16" (49.2) 13/32" (10.3) (10.3) 1" (53.2) B3690-11/4 11/4" (32) 3/8"-16 B3690-11/2 11/2" (40) 3/8"-16 31/16" (77.8) 2" (50) 3/8"-16 31/2" (88.9) 21/2" (65) 1/2"-13 47/16" (112.7) 1" (25.4) 3" (80) 1/2"-13 47/8" (123.8) 1" (25.4) 31/2" (90) 1/2"-13 53/16" (131.8) 1" 4" (100) 5/8"-11 61/8" (155.6) 11/4" (125) 5/8"-11 63/4" (171.4) 11/2" (38.1) 4" 73/4" (196.8) 13/16" (30.2) 47/16" 91/4" (234.9) 1" (25.4) 415/16" B3690-2 B3690-21/2 B3690-3 B3690-31/2 B3690-4 B3690-5 5" B3690-6 6" (150) 3/4"-10 B3690-8 8" (200) 3/4"-10 Design Load Part No. B3690-1/2 Bolt Size 1/4"-20 (25.4) 2" (50.8) 13/32" 1" (25.4) 21/8" (53.7) 13/32" (10.3) 1" (25.4) 25/16" (58.7) 13/32" (10.3) 3" (76.2) 9/16" (14.3) 31/8" (79.4) 9/16" (14.3) (25.4) 33/16" (81.0) 9/16" (14.3) (31.8) 37/8" (98.4) 9/16" (14.3) (101.6) 9/16" (14.3) (112.7) 9/16" (14.3) (125.4) 9/16" (14.3) 1" (71.4) Wt./C Lbs. kN Lbs. kg x 2" 400 (1.78) 20 (9.1) B3690-3/4 1/4"-20 x 21/4" 400 (1.78) 23 (10.4) B3690-1 1/4"-20 x 21/2" 400 (1.78) 24 (10.9) B3690-11/4 1/4"-20 23/4" 400 (1.78) 27 (12.2) x 3" 400 (1.78) 29 (13.1) x 31/2" 400 (1.78) 32 (14.5) x 41/2" 800 (3.56) 71 (32.2) x 5" 800 (3.56) 77 (34.9) B3690-11/2 B3690-2 1/4"-20 B3690-21/2 3/8"-16 B3690-3 x 1/4"-20 3/8"-16 B3690-31/2 3/8"-16 x 51/2" 800 (3.56) 84 (38.1) B3690-4 3/8"-16 x 61/2" 800 (3.56) 139 (63.0) B3690-5 3/8"-16 x 71/2" 800 (3.56) 166 (75.3) B3690-6 3/8"-16 x 81/2" 1000 (4.45) 226 (102.5) x 101/2" 1200 (5.34) 332 (150.6) B3690-8 3/8"-16 Dia. 'E' All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 39 Pipe Hangers Part No. Pipe Hangers Material: Steel 'A' (Rod Size) Hanger Rod Not Included 'E' Standard Finish: Plain, Electro-Plated, Dura-Green®, Hot-Dip Galvanized or Stainless Steel 'D' 'B' Bottom of pipe to top of hanger. Service: Designed for suspending non-insulated stationary pipe allowing for vertical adjustment. 'C' Center of pipe to top of hanger. Ordering: Specify part number and finish. 'D' Rod Take-Out Center of pipe to bottom of hanger rod. 'C' 'B' *Slide-Rite™ Clevis Hanger design, as shown above, for sizes 2, 21/2, 3, 4, 5 & 6. 'E' Minimum thread length of hanger rod 'F' Adjustment Top of cross bolt to bottom of hanger rod nut inside the hanger. Pat. No. 5,848,770 5,924,655 Approvals: Underwriter's Laboratories Listed for 3 /4" (20) thru 12" (300). Complies with Federal Specification WW-H-171E & A-A-1192A Type 1 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 1. For AWWA - Ductile Iron, see B3102, page 44. Note: When using oversized clevis hangers, install B3100PS (Pipe Sleeve) over cross bolt to prevent deformation of clevis bottom. When attaching seismic bracing to clevis hangers, a B3100PS (Pipe Sleeve) must be installed over the cross bolt (see Seismic Restraints Brochure). Order pipe sleeves B3100PS-(pipe size) separately. Figure B3100 Standard Clevis Hanger (Available with plastic coating as B3100C-size or felt lined as B3100F-Size) Part No. Nominal Pipe Size Rod Size 'A' ‘B’ ‘C’ Pipe Hangers B3100-1/2 1/2" (15) 3/8"-16 21/8" (54.0) 111/16" (42.9) B3100-3/4 3/4" (20) 3/8"-16 27/16" (61.9) 17/8" (47.6) (25) 3/8"-16 213/16" (71.4) 21/8" (54.0) 37/16" (87.3) 29/16" (65.1) B3100-1 1" B3100-11/4 11/4" (32) 3/8"-16 B3100-11/2 11/2" (40) 3/8"-16 4" (101.6)` 3" (76.2) B3100-2 * 2" (50) 3/8"-16 41/2" (114.3) 31/4" (82.5) 21/2" (65) 1/2"-13 59/16" (141.3) 4" (101.6) (80) 1/2"-13 63/4" (171.4) 47/8" (123.8) (90) 1/2"-13 7" (177.8) 5" (127.0) 713/16" (139.7) B3100-21/2 * B3100-3 * 3" B3100-31/2 31/2" B3100-4 * 4" (100) 5/8"-11 (198.4) 51/2" B3100-5 * 5" (125) 5/8"-11 91/16" (230.2) 61/8" (155.6) B3100-6 * 6" (150) 3/4"-10 107/16" (265.1) 615/16" (176.2) (200) 3/4"-10 123/4" (323.8) 83/8" (212.7) 151/4" (249.2) B3100-8 8" B3100-10 10" (250) 7/8"-9 (387.3) 913/16" B3100-12 12" 300) 7/8"-9 175/8" (447.7) 113/16" (284.2) B3100-14 14" (350) 1"-8 199/16" (496.9) 121/2" (317.5) 1"-8 217/16" (544.5) 135/16" (338.1) (403.2) B3100-16 B3100-18 16" 18" (400) (450) 1"-8 25" (635.0) 157/8" 271/2" (441.3) B3100-20 20" (500) 11/4"-7 (698.5) 173/8" B3100-24 24" (600) 11/4"-7 313/4" (806.4) 195/8" (498.5) B3100-30 30" (750) 11/4"-7 387/8" (987.3) 233/4" (603.2) (900) 11/4"-7 (1168.4) 2713/16" (706.4) B3100-36 36" 46" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 40 Pipe Hangers Slide-Rite™ Clevis Hanger Features 'A' (Rod Size) Hanger Rod Not Included 'E' Pipe will not ‘pinch’ when installing. 'D' 'B' Bottom of pipe to top of hanger. 15° swing in either direction allows pipe to easily feed thru. 'C' Center of pipe to top of hanger. Engineered design aligns bolt holes for quicker overhead installation. 'D' Rod Take-Out Center of pipe to bottom of hanger rod. 'C' 'E' Minimum thread length of hanger rod 'B' 'F' Adjustment Top of cross bolt to bottom of hanger rod nut inside the hanger. B3100C *Slide-Rite™ Clevis Hanger design, as shown above, for sizes 2, 21/2, 3, 4, 5 & 6. B3100F Pat. No. 5,848,770 5,924,655 Figure B3100 Standard Clevis Hanger (continued) (Available with plastic coating as B3100C-size or felt lined as B3100F-Size) Rod Take-Out 'D' B3100-1/2 15/16" B3100-3/4 11/8" B3100-1 13/8" 'E' Adjustment 'F' Lbs. Design Load kN Lbs. Wt./C kg (23.8) 21/2" (63.5) 7/16" (11.1) 730 (3.25) 25 (11.3) (28.6) 21/2" (63.5) 1/2" (12.7) 730 (3.25) 29 (13.1) (34.9) 21/2" (63.5) 5/8" (15.9) 730 (3.25) 35 (15.9) B3100-11/4 113/16" (46.0) 21/2" (63.5) 7/8" (22.2) 730 (3.25) 40 (18.1) B3100-11/2 21/4" (57.1) 21/2" (63.5) 13/16" (30.2) 730 (3.25) 42 (19.0) B3100-2 * 21/2" (63.5) 21/2" (63.5) 15/8" (41.3) 730 (3.25) 52 (23.6) B3100-21/2 * 31/16" (77.8) 21/2" (63.5) 2" (50.8) 1350 (6.00) 90 (40.8) B3100-3 * 315/16" (100.0) 21/2" (63.5) 2" (50.8) 1350 (6.00) 110 (49.9) B3100-31/2 41/16" (103.2) 21/2" (63.5) 2" (50.8) 1350 (6.00) 142 (64.4) B3100-4 * 43/8" (111.1) 21/2" (63.5) 2" (50.8) 1430 (6.36) 132 (59.9) 21/2" (63.5) 2" (50.8) 1430 (6.36) 215 (97.5) B3100-5 * 5" (127.0) B3100-6 * 511/16" (144.5) 3" (76.2) 2" (50.8) 1940 (8.63) 320 (145.1) B3100-8 71/8" (181.0) 31/2" (88.9) 25/16" (58.7) 2000 (8.89) 485 (220.0) B3100-10 83/8" (212.7) 31/2" (88.9) 25/16" (58.7) 3600 (16.01) 846 (383.7) B3100-12 911/16" (246.1) 31/2" (88.9) 25/8" (66.7) 3800 (16.90) 1083 (491.2) B3100-14 105/8" (269.9) 4" (101.6) 27/8" (73.0) 4200 (18.68) 1432 (649.5) B3100-16 119/16" (293.7) 4" (101.6) 211/16" (68.3) 4600 (20.46) 2200 (997.9) B3100-18 143/16" (360.3) 41/2" (114.3) 315/16" (100.0) 4800 (21.35) 2500 (1134.0) B3100-20 165/8" (422.3) 5" (127.0) 53/8" (136.5) 4800 (21.35) 4400 (1995.8) B3100-24 185/8" (473.1) 5" (127.0) 53/8" (136.5) 4800 (21.35) 5000 (2268.0) B3100-30 223/4" (577.8) 5" (127.0) 61/4" (158.7) 6000 (26.69) 6600 (2993.7) (127.0) 57/16" (138.1) 6000 (26.69) 8474 (3843.8) B3100-36 25" (635.0) 5" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 41 Pipe Hangers Part No. Pipe Hangers 'A' (Rod Size) Hanger Rod Not Included Material: Steel 'B' Bottom of pipe to top of hanger. 'E' Standard Finish: Plain, Electro-Plated or Dura-Green® 'C' Center of pipe to top of hanger. Service: Designed for suspending light stationary pipe allowing for vertical adjustment. Ordering: Specify part number and finish. 'D' Rod Take-Out Center of pipe to bottom of hanger rod. 'D' Approvals: Underwriters' Laboratories Listed for 3/4" (20) thru 4" (100) in Electro-Plated and Dura Green only. Complies with Federal Specification WW-H-171E & A-A-1192A Type 12. Electro-Plated and Dura-Green finishes meet Manufacturers Standardization Society MSS SP-69 & SP-58 Type 1. 'E' Minimum thread length of hanger rod. 'C' 'B' 'F' Adjustment Top of cross bolt to bottom of hanger rod nut inside the hanger. *Slide-Rite™ Clevis Hanger design for sizes 2, 3 & 4. B3104C B3104F Pat. No. 5,848,770 5,924,655 Figure B3104 Light-Duty Clevis Hanger (Available with plastic coating as B3104C-size or felt lined as B3104F-Size) Part No. Nominal Pipe Size B3104-1/2 1/2" B3104-3/4 3/4" B3104-1 1" Pipe Hangers B3104-11/4 11/4" B3104-11/2 11/2" B3104-2 * 2" B3104-21/2 21/2" Rod Size 'A' ‘B’ (15) 3/8"-16 115/16" (20) 3/8"-16 25/16" (25) 3/8"-16 23/4" (32) 3/8"-16 35/16" (40) 3/8"-16 35/8" (50) 3/8"-16 413/16" (65) 1/2"-13 513/16" 67/16" ‘C’ (49.2) 11/2" (38.1) (58.7) 13/4" (44.4) (69.8) 21/16" (52.4) (84.1) 27/16" (61.9) (92.1) 25/8" (66.7) (122.2) 35/8" (92.1) (147.6) 45/16" (109.5) (117.5) B3104-3 * 3" (80) 1/2"-13 (163.5) 45/8" B3104-31/2 31/2" (90) 1/2"-13 615/16" (176.2) 415/16" (125.4) B3104-4 * 4" (100) 1/2"-13 73/4" (196.8) 51/2" (139.7) Part No. Rod Take-Out 'D' Adjustment 'F' 'E' Design Load Wt./C Lbs. kN Lbs. kg B3104-1/2 13/16" (20.6) 21/2" (63.5) 7/16" (11.1) 150 (.67) 13 (5.9) B3104-3/4 1" (25.4) 21/2" (63.5) 7/16" (11.1) 250 (1.11) 22 (10.0) B3104-1 13/8" (34.9) 21/2" (63.5) 9/16" (14.3) 250 (1.11) 24 (10.9) B3104-11/4 13/4" (44.4) 21/2" (63.5) 13/16" (20.6) 250 (1.11) 29 (13.1) (50.8) 21/2" (63.5) 1" (25.4) 250 (1.11) 30 (13.6) (74.6) 21/2" (63.5) 13/4" (44.4) 250 (1.11) 35 (15.9) (87.3) 21/2" (63.5) 2" (50.8) 350 (1.55) 82 (37.2) (95.2) 21/2" (63.5) 2" (50.8) 350 (1.55) 91 (41.3) (101.6) 21/2" (63.5) 2" (50.8) 350 (1.55) 98 (44.4) (115.9) 21/2" (63.5) 23/16" (55.6) 400 (1.78) 132 (59.9) B3104-11/2 2" B3104-2 * 215/16" B3104-21/2 37/16" B3104-3 * 33/4" B3104-31/2 4" B3104-4 * 49/16" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 42 Pipe Hangers 'A' (Rod Size) Hanger Rod Not Included 'B' Bottom of pipe to top of hanger. Material: Steel Standard Finish: Dura-Copper® 'C' Center of pipe to top of hanger. 'E' Service: Designed for suspending copper tubing allowing for vertical adjustment. (Available with plastic coating to provide additional separation between tubing and hanger). 'D' Rod Take-Out Center of pipe to bottom of hanger rod. 'D' 'C' Ordering: Specify part number and finish. 'E' Minimum thread length of hanger rod. 'B' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 12 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 1. 'F' Adjustment Top of cross bolt to bottom of hanger rod nut inside the hanger. B3104CT Figure B3104CT Clevis Hanger B3104CTC Part No. Nominal Tubing Size Rod Size 'A' 'B' Rod Take-Out 'D' 'C' B3104CT-1/2 1/2" (15) 3/8"-16 21/4" (57.1) 115/16" (49.2) 11/8" (28.6) B3104CT-3/4 3/4" (20) 3/8"-16 115/16" (49.2) 11/2" (38.1) 11/8" (28.6) (25) 3/8"-16 25/16" (58.7) 13/4" (44.4) 15/16" (33.3) 23/4" (39.7) B3104CT-1 1" B3104CT-11/4 11/4" (32) 3/8"-16 (69.8) 21/16" (52.4) 19/16" B3104CT-11/2 11/2" (40) 3/8"-16 35/16" (84.1) 27/16" (61.9) 21/16" (52.4) 2" (50) 3/8"-16 41/2" (114.3) 37/16" (87.3) 33/8" (85.7) 21/2" (65) 1/2"-13 511/16" (144.5) 41/2" (114.3) 315/16" (100.0) 53/16" B3104CT-2 B3104CT-21/2 (80) 1/2"-13 (131.8) 35/8" (92.1) 4" (101.6) 31/2" (90) 1/2"-13 61/2" (165.1) 49/16" (115.9) 41/8" (104.8) B3104CT-4 4" (100) 1/2"-13 73/8" (187.3) 35/16" (134.9) 43/8" (111.1) B3104CT-5 5" 6" (125) 1/2"-13 105/16" (228.6) 67/16" (163.5) 53/4" (146.0) B3104CT-3 B3104CT-31/2 B3104CT-6 3" Part No. (150) 'E' 5/8"-11 9" 71/4" (261.9) 61/2" (184.1) Adjustment 'F' Lbs. Design Load kN Lbs. kg (5.4) (165.1) Wt./C B3104CT-1/2 21/2" (63.5) 3/8" (9.5) 150 (.67) 12 B3104CT-3/4 21/2" (63.5) 7/16" (11.1) 250 (1.11) 12 (5.4) B3104CT-1 21/2" (63.5) 9/16" (14.3) 250 (1.11) 22 (10.0) B3104CT-11/4 21/2" (63.5) 9/16" (14.3) 250 (1.11) 24 (10.9) B3104CT-11/2 21/2" (63.5) 15/16" (23.8) 250 (1.11) 30 (13.6) B3104CT-2 21/2" (63.5) 13/4" (44.4) 250 (1.11) 35 (15.9) B3104CT-21/2 21/2" (63.5) 21/8" (54.0) 350 (1.55) 80 (36.3) B3104CT-3 21/2" (63.5) 21/16" (52.4) 350 (1.55) 88 (39.9) B3104CT-31/2 21/2" (63.5) 21/8" (54.0) 350 (1.55) 94 (42.6) B3104CT-4 21/2" (63.5) 21/8" (54.0) 400 (1.78) 116 (52.6) B3104CT-5 21/2" (63.5) 21/2" (63.5) 550 (2.44) 208 (94.3) B3104CT-6 21/2" (63.5) 3" (76.2) 550 (2.44) 247 (112.0) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 43 Pipe Hangers (Available with plastic coating as B3104CTC-size) Pipe Hangers Material: Steel (Stainless steel available) 'A' (Rod Size) Hanger Rod Not Included 'E' Standard Finish: Plain or Electro-Plated Service: Designed for suspending stationary ductile iron and cast iron pipe and ductile pipe allowing for vertical adjustment. 'B' Bottom of pipe to top of hanger. 'C' Center of pipe to top of hanger. 'D' Ordering: Specify part number and finish. Note: For pipe sizes 12" (300) and larger; cross bolt sleeve is included. 'D' Rod Take-Out Center of pipe to bottom of hanger rod. 'C' Approvals: Manufacturers Standardization Society MSS SP-69 & SP-58 Type 1. 'E' Minimum thread length of hanger rod 'B' 'F' Adjustment Top of cross bolt to bottom of hanger rod nut inside the hanger. Figure B3102 Clevis Hanger for AWWA Ductile Iron Pipe Part No. Nominal Pipe Size Rod Size 'A' ‘B’ B3102-4 4" (100) (211.1) 513/16" B3102-6 6" (150) 3/4"-10 105/8" (269.9) 71/16" (179.4) B3102-8 8" (200) 3/4"-10 131/4" (336.5) 85/8" (219.1) (250) 7/8"-9 157/8" (403.2) 101/4" (260.3) (287.3) B3102-10 10" 85/16" 'C' 5/8"-11 (147.6) Pipe Hangers B3102-12 12" (300) 7/8"-9 18" (457.2) 115/16" B3102-14 14" (350) 1"-8 203/8" (517.5) 125/8" (320.7) B3102-16 16" (400) 1"-8 231/2" (569.9) 1411/16" (373.1) (450) 1"-8 255/8" (650.9) 153/4" (400.0) 291/2" (749.3) 189/16" (471.5) 33" (838.2) 191/8" (508.0) B3102-18 18" B3102-20 20" (500) 11/4"-7 B3102-24 24" (600) 11/4"-7 Part No. Rod Take-Out 'D' 'E' Adjustment 'F' Design Load Lbs. kN Lbs. Wt./C kg B3102-4 45/8" (117.5) 21/2" (63.5) 2" (50.8) 1430 (6.36) 203 (92.1) B3102-6 513/16" (147.6) 3" (76.2) 2" (50.8) 1940 (8.63) 352 (159.6) B3102-8 73/16" (182.5) 31/2" (88.9) 21/8" (54.0) 2000 (8.89) 532 (241.3) B3102-10 811/16" (220.6) 31/2" (88.9) 21/4" (57.1) 3600 (16.01) 800 (362.9) B3102-12 93/4" (247.6) 31/2" (88.9) 21/4" (57.1) 3800 (16.90) 1152 (522.5) B3102-14 113/16" (101.6) 27/8" (73.0) 4200 (18.68) 1449 (657.2) B3102-16 127/8" (327.0) 4" (101.6) 33/8" (85.7) 4600 (20.46) 2100 (952.6) B3102-18 1315/16" (354.0) 41/2" (114.3) 33/8" (85.7) 4800 (21.35) 2294 (1040.5) B3102-20 177/16" (442.9) 5" (127.0) 413/16" (122.2) 4800 (21.35) 3887 (1763.1) (127.0) 51/4" (133.3) 4800 (21.35) 4844 (2197.2) B3102-24 20" (281.6) (485.8) 4" 5" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 44 Pipe Hangers 'H' Maximum insulation thickness. 'A' (Rod Size) Hanger Rod Not Included Material: Steel (Stainless Steel Type 304 available) 'B' Bottom of pipe to top of hanger. Standard Finish: Plain or Electro-Plated 'C' Center of pipe to top of hanger. 'C' 'E' Service: Designed for suspending insulated pipe allowing for vertical adjustment. 'D' Rod Take-Out Center of pipe to bottom 'B' of hanger rod. Ordering: Specify part number and finish. For Service temperatures of 750oF (399oC) thru 1050oF (565oC) specify Type 304 Stainless Steel. 'E' Minimum thread length of hanger rod 'D' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 1 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 1. 'F' Adjustment Top of cross bolt to bottom of hanger rod nut inside the hanger. Note: Hangers are sized to nominal pipe size Allowance must be made for insulation thicknesses. Figure B3108 Extended Clevis Hanger B3108-3/4 B3108-1 Nominal Pipe Size 3/4" 1" Rod Size 'A' 'B' (20) 3/8"-16 43/8" (25) 3/8"-16 43/4" 53/8" ‘C’ (111.1) 313/16" (96.8) (120.6) 41/16" (103.2) (114.3) B3108-11/4 11/4" (32) 3/8"-16 (136.5) 41/2" B3108-11/2 11/2" (40) 3/8"-16 67/8" (174.6) 515/16" (150.8) 2" (50) 3/8"-16 813/16" (223.8) 75/8" (193.7) 21/2" (65) 1/2"-13 10" (254.0) 81/2" (215.9) (80) 1/2"-13 105/8" (269.9) 813/16" (223.8) (100) 5/8"-11 1113/16" (300.0) 91/2" (241.3) 131/8" (261.9) B3108-2 B3108-21/2 B3108-3 B3108-4 3" 4" B3108-5 5" (125) 5/8"-11 (333.4) 105/16" B3108-6 6" (150) 3/4"-10 143/8" (365.1) 11" (279.4) B3108-8 8" (200) 3/4"-10 163/4" (425.4) 123/8" (314.3) (250) 7/8"-9 191/4" (488.9) 1313/16" (350.8) (300) 7/8"-9 215/8" (549.3) 153/16" (385.8) B3108-10 B3108-12 Part No. 10" 12" Rod Take-Out 'D' 'E' B3108-3/4 31/16" (77.8) 21/2" B3108-1 31/4" (82.5) 21/2" B3108-11/4 35/16" (84.1) 21/2" B3108-11/2 51/8" (130.2) 21/2" B3108-2 67/8" (174.6) 21/2" B3108-21/2 79/16" (192.1) 21/2" B3108-3 77/8" (200.0) 21/2" B3108-4 83/8" (212.7) B3108-5 91/8" (231.8) B3108-6 911/16" B3108-8 111/8" B3108-10 125/16" B3108-12 135/8" Adjustment 'F' Design Load 'H' Pipe Hangers Part No. Wt./C Lbs. kN Lbs. kg (63.5) 1/2" (12.7) 2" (50.8) 730 (3.25) 45 (20.4) (63.5) 5/8" (15.9) 2" (50.8) 730 (3.25) 49 (22.2) (63.5) 7/8" (22.2) 2" (50.8) 730 (3.25) 55 (24.9) (63.5) 13/16" (30.2) 2" (50.8) 730 (3.25) 67 (30.4) (63.5) 15/8" (41.3) 4" (101.6) 730 (3.25) 83 (37.6) (63.5) 2" (50.8) 4" (101.6) 1350 (6.00) 177 (80.3) (63.5) 2" (50.8) 4" (101.6) 1350 (6.00) 191 (86.6) 21/2" (63.5) 2" (50.8) 4" (101.6) 1430 (6.36) 237 (107.5) 21/2" (63.5) 2" (50.8) 4" (101.6) 1430 (6.36) 302 (137.0) (246.0) 3" (76.2) 2" (50.8) 4" (101.6) 1940 (8.63) 397 (180.1) (282.6) 31/2" (88.9) 25/16" (58.7) 4" (101.6) 2000 (8.89) 582 (264.0) (312.7) 31/2" (88.9) 25/16" (58.7) 4" (101.6) 3600 (16.01) 968 (439.1) (346.1) 31/2" (88.9) 25/8" 4" (101.6) 3800 (16.90) 1221 (553.8) (66.7) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 45 Pipe Hangers Material: Steel Standard Finish: Plain or Electro-Plated Service: Designed for suspending non-insulated, stationary pipe where space is limited. 'A' (Rod Size) Hanger Rod Not Included Ordering: Specify part number and size. Approvals: Complies with Manufacturers Standardization Society MSS SP-69 & SP-58 Type 1. 'C' 'B' 'D' 'B' Bottom of pipe to top of hanger. 'C' Center of pipe to top of hanger. 'D' Rod Take-Out Center of pipe to bottom of hanger rod. Figure B3109 Flat Top Clevis Hanger Pipe Hangers Nominal Pipe Size Part No. B3109-2 B3109-21/2 B3109-3 B3109-31/2 B3109-4 Rod Size 'A' ‘B’ (50) 3/8"-16 21/2" (65) 1/2"-13 45/8" (117.5) 3" (80) 1/2"-13 55/16" (134.9) 31/2" (90) 1/2"-13 513/16" (147.6) (100) 5/8"-11 61/2" (165.1) 713/16" (198.4) 2" 4" 313/16" (96.8) B3109-5 5" (125) 5/8"-11 B3109-6 6" (150) 3/4"-10 97/16" (230.2) B3109-8 8" (200) 3/4"-10 113/8" (288.9) Part No. Rod Take-Out 'D' 'C' Design Load Wt./C Lbs. kN Lbs. kg 52 (23.6) B3109-2 25/8" (66.7) 17/8" (47.6) 300 (1.33) B3109-21/2 33/16" (81.0) 23/16" (55.6) 500 (2.22) 116 (52.6) B3109-3 39/16" (90.5) 25/8" (66.7) 500 (2.22) 133 (60.3) B3109-31/2 313/16" (96.8) 27/8" (73.0) 500 (2.22) 145 (65.8) (107.9) 31/8" (79.4) 700 (3.11) 180 (81.6) B3109-4 41/4" B3109-5 5" (127.0) 37/8" (98.4) 700 (3.11) 248 (112.5) B3109-6 511/16" (144.5) 47/16" (112.7) 900 (4.00) 332 (150.6) B3109-8 7" (177.8) 513/16" (147.6) 1000 (4.45) 513 (232.7) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 46 Pipe Hangers Material: Steel 'A' (Rod Size) Hanger Rod Not Included 'B' Overall Height Standard Finish: Plain or Electro-Plated Service: Designed for suspending flexible plastic pipe. Use with B3106V Plastic Pipe Support Channel (see below). 'C' Center of pipe to top of hanger. 'D' Rod Take-Out Center of pipe to bottom of hanger rod. 'B' Ordering: Specify part number and finish. Approvals: Complies with Manufacturers Standardization Society MSS SP-69 & SP-58 Type 1. 'E' Minimum thread length of hanger rod 'D' 'C' Figure B3106 Vee Bottom Clevis Hanger B3106-2 1/2" B3106-4 21/2" to 4" to 2" B3106-2 35/16" B3106-4 413/16" 'B' ‘C’ (15 to 50) 3/8"-16 515/16" (150.8) 41/16" (103.2) (65 to 100) 1/2"-13 93/8" (238.1) 6" (152.4) Rod Take-Out 'D' Part No. Rod Size 'A' Adjustment 'E' Design Load Wt./C Lbs. kN Lbs. kg (84.1) 15/8" (41.3) 150 (.67) 60 (27.2) (122.2) 23/16" (55.6) 150 (.67) 143 (64.8) Pipe Hangers Nominal Pipe Size Part No. Material: Steel Standard Finish: Pre-Galvanized 'T' x 'L' Steel Size Service: Designed as a continuous support for plastic or other flexible pipe systems. Use with B3106 Vee Bottom Clevis Hanger. Hangers should be located as close as possible to the channel joints. 'B' Ordering: Specify part number and finish. Figure B3106V Plastic Pipe Support Channel Part No. For Nominal Pipe Sizes B3106V-2 1/2" to 2" B3106V-4 21/2" to 4" (15 to 50) Maximum Hanger Spacing Steel Size 'T' x 'L' 18 Ga. x 96" (65 to 100) 18 Ga. x 120" 'B' Design Load Wt./C Ft. M Lbs. kN Lbs. kg (1.2 x 2438.4) 19/16" (39.7) 8 (2.44) 150 (.67) 449 (203.6) (1.2 x 3048.0) 31/8" (79.4) 10 (3.05) 150 (.67) 1123 (509.4) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 47 Pipe Hangers 'A' (Rod Size) Hanger Rod Not Included Material: Steel Standard Finish: Pre-Galvanized 'B' Center of pipe to top of knurled hanger rod nut. 'C' Rod Take-Out Center of pipe to bottom of hanger rod. 'C' 'D' 'B' 'D' Top of pipe to bottom of hanger rod nut. B3170NF B3170NFC B3170NFF Service: Designed for suspending insulated pipe (with shield) or non-insulated pipe allowing for vertical adjustment. Ordering: Specify part number and finish. Approvals: Underwriters' Laboratories Listed for 1 /2" (15) thru 4" (100). Complies with Federal Specification WW-H-171E & A-A-1192A Type 10 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 10, and the National Fire Protection Association Code (NFPA). Note: Knurled nut available as B3170KN-(rod size) Specify the B3170NF part number it will be used in when ordering. Figure B3170NF Adjustable Swivel Ring (Available with plastic coating as B3170NFC-size or felt lined as B3170NFF-size) Part No. Pipe Hangers B3170NF-1/2 B3170NF-3/4 B3170NF-1 B3170NF-11/4 B3170NF-11/2 B3170NF-2 B3170NF-21/2 B3170NF-3 B3170NF-31/2 B3170NF-4 B3170NF-5 B3170NF-6 B3170NF-8 Nominal Pipe Size 1/2" Rod Size 'A' (15) 3/8"-16 3/4" (20) 3/8"-16 1" 11/4" 11/2" 2" 21/2" 3" 31/2" 4" 5" 6" 8" (25) 3/8"-16 (32) 3/8"-16 (40) 3/8"-16 (50) 3/8"-16 (55) 3/8"-16 (80) 3/8"-16 (90) 3/8"-16 (100) 3/8"-16 (125) 1/2"-13 (150) 1/2"-13 (200) 1/2"-13 'B' 27/16" 21/2" 25/8" 27/8" 3" 37/16" 37/8" 41/4" 45/8" 5" 9 5 /16" 67/16" 711/16" 'C' (61.9) (63.5) (66.7) (73.0) (76.2) (87.2) (98.4) (107.9) (117.5) (127.0) (141.3) (163.5) (195.3) Design Load Part No. 'D' B3170NF-1/2 11/4" (31.7) B3170NF-3/4 B3170NF-1 B3170NF-11/4 B3170NF-11/2 B3170NF-2 B3170NF-21/2 B3170NF-3 B3170NF-31/2 B3170NF-4 B3170NF-5 B3170NF-6 B3170NF-8 11/4" 11/4" 11/4" 11/4" 11/2" 111/16" 13/4" 17/8" 2" 3 1 /4" 23/16" 27/16" (31.7) (31.7) (31.7) (31.7) (38.1) (42.9) (44.4) (47.6) (50.8) (44.4) (53.0) (61.9) 13/16" 11/4" 13/8" 15/8" 13/4" 23/16" 25/8" 3" 33/8" 33/4" 41/16" 415/16" 63/16" kN Lbs. kg 180 180 180 180 180 180 200 250 300 360 480 630 970 (.80) 11 12 13 14 14 16 25 29 33 40 83 91 130 (5.0) (.80) (.80) (.80) (.80) (.89) (1.11) (1.33) (1.60) (2.13) (2.80) (4.31) (31.7) (34.9) (41.2) (44.4) (55.6) (66.7) (76.2) (85.7) (95.2) (103.2) (125.4) (157.2) Wt./C Lbs. (.80) (30.2) (5.4) (5.9) (6.3) (6.3) (7.2) (11.3) (13.1) (14.9) (18.1) (37.6) (41.3) (58.9) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 48 Pipe Hangers Material: Steel Standard Finish: Pre-Galvanized 'A' (Rod Size) Hanger Rod Not Included Service: Designed for suspending insulated pipe (with shield) or non-insulated pipe allowing for vertical adjustment. 'B' Center of pipe to top of knurled hanger rod nut. 'C' Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 10 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 10. 'C' Rod Take-Out Center of pipe to bottom of hanger rod. 'D' 'B' Note: For pipe sizes 2" (50) and under, use B3170NF. 'D' Top of pipe to bottom of hanger rod nut. Note: Knurled nut available as B3170KN-(rod size) Specify the B3170 part number it will be used in when ordering. Figure B3170 Adjustable Swivel Ring Nominal Pipe Size 21/2" B3170-21/2 Rod Size 'A' 'B' (65) 1/2"-13 4" 'C' (101.6) 25/8" (66.7) 41/2" (79.4) 3" (80) 1/2"-13 (114.3) 31/8" B3170-31/2 31/2" (90) 1/2"-13 415/16" (125.4) 39/16" (90.5) B3170-4 * 4" (100) 5/8"-11 53/16" (131.8) 35/8" (92.1) 523/32" (145.2) 41/8" (104.8) 7" (177.8) 51/16" (128.6) (203.2) 65/16" (160.3) B3170-3 B3170-5 5" (125) 5/8"-11 B3170-6 6" (150) 3/4"-10 (200) 3/4"-10 8" B3170-8 1 8" 1 * Available for /2"-13 rod size. Specify as B3170-4-R /2 Design Load Part No. 'D' Wt./C Lbs. kN Lbs. kg B3170-21/2 19/16" (36.5) 300 (1.33) 29 (13.1) B3170-3 15/8" (41.3) 300 (1.33) 34 (15.4) 113/16" (46.0) 300 (1.33) 42 (19.0) B3170-4 15/8" (41.3) 475 (2.11) 54 (24.5) B3170-5 15/8" (41.3) 475 (2.11) 97 (44.0) B3170-6 2" (50.8) 950 (4.22) 113 (51.2) B3170-8 21/2" (57.1) 950 (4.22) 140 (63.5) B3170-31/2 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 49 Pipe Hangers Part No. Pipe Hangers Material: Steel Standard Finish: Dura-Copper® Service: Designed for suspending copper tubing, allowing for vertical adjustment. (Available with plastic coating to provide additional separation between tubing and hanger). 'A' (Rod Size) Hanger Rod Not Included Swaged Knurl Nut on sizes 21/2” thru 4”. Knurl nut swaged to prevent loss of nut during installation. Ordering: Specify part number, rod size and finish. Note: Sizes 21/2" (65) thru 4" (100) available for 3 /8"-16 rod size. 'B' Center of pipe to top of knurled hanger rod nut. 'C' 'D' Approvals: Complies with Federal Specifications WW-H-171E & A-A-1192A Type 10 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 10. 'C' Rod Take-Out Center of pipe to bottom of hanger rod. 'B' 'D' Top of pipe to bottom of hanger rod nut. Note: Knurled nut available as B3170KN-(rod size) Specify the B3170CT part number it will be used in when ordering. B3170CT B3170CTC Pipe Hangers Figure B3170CT Adjustable Swivel Ring (Available with Plastic Coating as B3170CTC-size) Part No. Nominal Rod Size Tubing Size 'A' Design Load 'B' 'C' 'D' Wt./C Lbs. kN Lbs. kg B3170CT-1/2 1/2" (15) 3/8"-16 21/16" (52.4) 11/8" (28.6) 31/32" (24.6) 180 (.80) 8 (3.6) B3170CT-3/4 3/4" (20) 3/8"-16 25/16" (58.7) 15/16" (33.3) 11/32" (26.2) 180 (.80) 10 (4.5) 1" (25) 3/8"-16 21/2" (63.5) 19/16" (39.7) 15/32" (29.3) 180 (.80) 10 (4.5) B3170CT-11/4 11/4" (32) 3/8"-16 21/2" (63.5) 19/16" (39.7) 1" (25.4) 180 (.80) 12 (5.4) B3170CT-11/2 11/2" (40) 3/8"-16 215/16" (50.8) 15/16" (33.3) 180 (.80) 12 (5.4) (50) 3/8"-16 31/8" (54.0) 13/16" (30.2) 180 (.80) 12 (5.4) (65) 1/2"-13 41/16" (65.1) 13/8" (34.9) 200 (.89) 31 (14.0) 315/16" B3170CT-1 B3170CT-2 B3170CT-21/2 2" 21/2" (74.6) 2" (79.4) 21/8" (103.2) 29/16" (80) 1/2"-13 (100.0) 33/4" (69.8) 11/4" (31.7) 250 (1.11) 33 (14.9) 31/2" (90) 1/2"-13 47/16" (112.7) 31/4" (82.5) 11/2" (38.1) 300 (1.33) 38 (17.2) B3170CT-4 4" (100) 1/2"-13 411/16" (119.1) 39/16" (90.5) 19/16" (39.7) 360 (1.60) 40 (18.1) B3170CT-6 5" (125) 1/2"-13 515/16" (150.8) 45/16" (109.5) 125/32" (45.2) 480 (2.13) 95 (43.1) B3170CT-8 6" (150) 1/2"-13 611/16" (169.9) 53/16" (131.8) 21/8" (54.0) 630 (2.80) 118 (53.5) B3170CT-3 B3170CT-31/2 3" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 50 Pipe Hangers 'A' (Rod Size) Hanger Rod Not Included 'C' Material: Malleable Iron Standard Finish: Plain or Electro-Plated Service: Designed for suspending non-insulated pipe horizontally or vertically. Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 25 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 12. Figure B3198H Hinged Extension Split Pipe Clamp Nominal Pipe Size Rod Size 'A' Design Load 'C' Wt./C Lbs. kN Lbs. kg B3198H-3/8 3/8" (10) 3/8"-16 31/32" (24.6) 180 (.80) 9 (4.1) B3198H-1/2 1/2" (15) 3/8"-16 11/16" (27.0) 180 (.80) 12 (5.4) B3198H-3/4 3/4" (20) 3/8"-16 17/32" (30.9) 180 (.80) 12 (5.4) (25) 3/8"-16 111/32" (34.1) 180 (.80) 13 (5.9) (32) 3/8"-16 119/32" (39.7) 180 (.80) 18 (8.1) (40) 3/8"-16 123/32" (43.6) 180 (.80) 21 (9.5) (50) 3/8"-16 2" (50.8) 180 (.80) 44 (19.9) (65) 1/2"-13 211/32" (59.5) 300 (1.33) 73 (33.1) (80) 1/2"-13 223/32" (69.0) 300 (1.33) 95 (43.1) B3198H-1 1" B3198H-11/4 11/4" B3198H-11/2 11/2" B3198H-2 B3198H-21/2 B3198H-3 2" 21/2" 3" Material: Malleable Iron (Stainless Steel Type 304 available) 'A' (Thread Size) Hanger Rod Not Included 'C' Standard Finish: Plain or Electro-Plated Service: Designed for suspending non-insulated pipe horizontally. Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 25 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 12. Figure B3198R Extension Split Pipe Clamp Part No. Rod Thread Nominal Pipe Size B3198R-3/8 3/8" B3198R-1/2 1/2" B3198R-3/4 3/4" Thread Size 'A' Rod 'C' Design Load Wt./C Lbs. kN Lbs. kg (10) 3/8"-16 31/32" (24.6) 180 (.80) 12 (5.4) (15) 3/8"-16 11/16" (27.0) 180 (.80) 16 (7.2) (20) 3/8"-16 17/32" (30.9) 180 (.80) 18 (8.1) 111/32" 1" (25) 3/8"-16 (34.1) 180 (.80) 24 (10.9) B3198R-11/4 11/4" (32) 3/8"-16 119/32" (39.7) 180 (.80) 29 (13.1) B3198R-11/2 11/2" (40) 3/8"-16 123/32" (43.6) 180 (.80) 32 (14.5) 2" (50) 3/8"-16 2" (50.8) 180 (.80) 39 (17.7) (65) 1/2"-13 211/32" (59.5) 300 (1.33) 115 (52.1) (80) 1/2"-13 223/32" (69.0) 300 (1.33) 140 (63.5) (100) 1/2"-13 311/32" (84.9) 300 (1.33) 160 (72.6) B3198R-1 B3198R-2 B3198R-21/2 B3198R-3 B3198R-4 21/2" 3" 4" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 51 Pipe Hangers Part No. Pipe Hangers Material: Malleable Iron 'A' (Rod Size) Hanger Rod Not Included 'C' Standard Finish: Dura-Copper® Service: Designed for suspending copper tubing horizontally or vertically. Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 25 and Manufacturers Standardization MSS Society SP-69 & SP-58 Type 12. Figure B3198HCT Hinged Extension Split Pipe Clamp Part No. Nominal Tubing Size Rod Size 'A' Design Load 'C' Lbs. kN Wt./C Lbs. kg B3198HCT-1/2 1/2" (15) 3/8"-16 5/8" (15.9) 180 (.80) 8 (3.6) B3198HCT-3/4 3/4" (20) 3/8"-16 13/16" (20.6) 180 (.80) 10 (4.5) 1" (25) 3/8"-16 15/16" (23.8) 180 (.80) 10 (4.5) B3198HCT-11/4 11/4" (32) 3/8"-16 11/8" (28.6) 180 (.80) 14 (6.3) B3198HCT-11/2 11/2" (40) 3/8"-16 19/16" (39.7) 180 (.80) 18 (8.1) (50) 3/8"-16 17/8" (47.6) 180 (.80) 23 (10.4) B3198HCT-1 B3198HCT-2 2" Material: Malleable Iron Pipe Hangers 'A' (Thread Size) Hanger Rod Not Included 'C' Standard Finish: Dura-Copper® Service: Designed for suspending copper tubing horizontally. Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 25 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 12. Figure B3198RCT Extension Split Pipe Clamp Part No. Nominal Tubing Size B3198RCT-3/8 3/8" B3198RCT-1/2 B3198RCT-3/4 Rod Size 'A' Design Load 'C' Wt./C Lbs. kN Lbs. kg (10) 3/8"-16 11/16" (17.5) 180 (.80) 12 (5.4) 1/2" (15) 3/8"-16 111/16" (17.5) 180 (.80) 12 (5.4) 3/4" (20) 3/8"-16 7/8" (22.2) 180 (.80) 14 (6.3) 1" (25) 3/8"-16 11/16" (27.0) 180 (.80) 17 (7.7) B3198RCT-11/4 11/4" (32) 3/8"-16 11/8" (28.6) 180 (.80) 17 (7.7) B3198RCT-11/2 11/2" (40) 3/8"-16 15/16" (33.3) 180 (.80) 22 (10.0) (50) 3/8"-16 11/2" (38.1) 180 (.80) 26 (11.8) B3198RCT-1 B3198RCT-2 2" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 52 Pipe Hangers Bolt and Nut Included Bolt Size Material: Steel Standard Finish: Pre-Galvanized Steel Size Service: Designed for suspending light-weight non-insulated pipe. (Use with B3222 Eye Socket or B3224 Hanger Adjuster). 'C' Ordering: Specify part number and finish. Figure B3175 Ring and Bolt Hanger Nominal Pipe Size Part No. B3175-1/2 1/2" B3175-3/4 3/4" Design Load 'C' (15) 11/16" (20) 13/16" Bolt Size Wt./C Steel Size Lbs. kN Lbs. kg 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 7.5 (3.4) 8.0 (3.6) (27.0) 1/4"-20 (30.2) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 18 Ga. x 7/8" 1" (25) 15/16" (33.3) 1/4"-20 (1.2 x 22.2) 275 (1.22) 9.0 (4.1) B3175-11/4 11/4" (32) 11/2" (38.1) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 10.5 (4.7) B3175-11/2 11/2" (40) 15/8" (41.3) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 11.5 (5.2) 2" (50) 113/16" (46.0) 1/4"-20 18 Ga. x 7/8" (1.2 x 22.2) 275 (1.22) 13.0 (5.9) (65) 25/16" (58.7) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 30.0 (13.6) (80) 25/8" (66.7) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 35.0 (15.9) (90) 27/8" (73.0) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 38.5 (17.4) 16 Ga. x 11/4" B3175-1 B3175-2 21/2" B3175-21/2 3" B3175-3 31/2" B3175-31/2 B3175-4 4" (100) 31/8" (79.4) 5/16"-18 (1.5 x 31.7) 500 (2.22) 42.0 (19.0) B3175-5 5" (125) 35/8" (92.1) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 51.0 (23.1) B3175-6 6" (150) 43/16" (106.4) 5/16"-18 16 Ga. x 11/4" (1.5 x 31.7) 500 (2.22) 58.5 (26.5) Standard Finish: Copper Plated (for identification only) Bolt Size Steel Size Service: Designed for suspending copper tubing allowing for vertical adjustment. (Use with B3222 Eye Socket or B3224 Hanger Adjuster). 'C' Ordering: Specify part number and finish. Figure B3175CT Ring & Bolt Part No. Nominal Tubing Size Design Load 'C' Bolt Size Steel Size Lbs. kN Wt./C Lbs. kg B3175CT-1/2 1/2" (15) 15/16" (33.3) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 8 (3.6) B3175CT-3/4 3/4" (20) 13/8" (34.9) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 8 (3.6) (25) 13/16" (30.2) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 8 (3.6) (32) 15/16" (33.3) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 10 (4.5) (40) 11/2" (38.1) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 11 (5.0) x 7/8" B3175CT-1 1" B3175CT-11/4 11/4" B3175CT-11/2 11/2" B3175CT-2 B3175CT-21/2 B3175CT-3 B3175CT-31/2 B3175CT-4 2" (50) 115/16" (49.2) 1/4"-20 x 1" 1/16" (1.6 x 22.2) 200 (.89) 11 (5.0) 21/2" (65) 23/16" (55.6) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 12 (5.4) 3" (80) 211/16" (68.3) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 14 (6.3) 31/2" (90) 215/16" (74.6) 1/4"-20 x 1" 1/16" x 7/8" (1.6 x 22.2) 200 (.89) 16 (7.2) (100) 33/16" (81.0) 1/4"-20 x 1" 1/16" 7/8" (1.6 x 22.2) 200 (.89) 18 (8.1) 4" x All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 53 Pipe Hangers Material: Steel Bolt and Nut Included Pipe Hangers Material: Malleable Iron 'A' (Rod Size) Standard Finish: Plain or Electro-Plated Service: Hanger may be installed prior to hoisting pipe in place. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 6 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 6. 'B' Ordering: Specify part number and finish. 'C' Note: Hanger sizes 3/4" (20) thru 2" (50) swivel nut is flared as shown in drawing. Hanger sizes 2 1/2" (65) thru 6" (150) swivel nut has wire retaining ring. Figure B3171 Adjustable Swivel Ring Part No. B3171-3/4 B3171-1 Nominal Pipe Size 3/4" 1" B3171-11/4 11/4" B3171-11/2 11/2" Rod Size 'A' 'B' 'C' Pipe Hangers (20) 3/8"-16 21/8" (54.0) 25/8" (66.7) (25) 3/8"-16 25/16" (58.7) 3" (76.2) (32) 3/8"-16 29/16" (65.1) 33/8" (85.7) (40) 3/8"-16 23/4" (69.8) 33/4" (95.2) 31/16" (107.9) 2" (50) 3/8"-16 (77.8) 41/4" 21/2" (65) 1/2"-13 45/16" (109.5) 53/4" (146.0) B3171-3 3" (80) 1/2"-13 45/8" (117.5) 63/8" (161.9) B3171-4 4" (100) 5/8"-11 6" (152.4) 81/4" (209.5) (125) 5/8"-11 63/4" (171.4) 91/2" (241.3) (150) 3/4"-10 711/16" (195.3) 11" (279.4) B3171-2 B3171-21/2 B3171-5 B3171-6 Part No. 5" 6" Nominal Pipe Size Design Load Wt./C Lbs. kg 3/4" (20) 300 (1.33) 23 (10.4) 1" (25) 300 (1.33) 25 (11.3) B3171-11/4 11/4" (32) 300 (1.33) 30 (13.6) B3171-11/2 11/2" (40) 300 (1.33) 32 (14.5) B3171-3/4 B3171-1 2" (50) 300 (1.33) 34 (15.4) 21/2" (65) 500 (2.22) 65 (29.5) B3171-3 3" (80) 500 (2.22) 78 (35.4) B3171-4 4" (100) 900 (4.00) 154 (69.8) B3171-5 5" (125) 900 (4.00) 200 (90.7) B3171-6 6" (150) 1300 (5.78) 320 (145.1) B3171-2 B3171-21/2 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 54 Pipe Hangers Material: Steel Rod Size 9/16" Standard Finish: Plain or Electro-Plated (14.3) 2 Holes 'T' Service: Designed for supporting non-insulated stationary pipe, allowing vertical adjustment and flexibility for seismic bracing. 'C' Ordering: Specify part number and finish. 'B' 'W' Pipe Size HHCS and Hex Nuts Included Figure B386 Suspension Rod Pipe Clamp Pipe Size Rod Size 'B' 'C' 3/4" (20) 3/8"-16 35/16" (84.1) 23/16" (55.6) 1" (25) 3/8"-16 33/4" (95.2) 25/16" (58.7) B386-11/4 11/4" (32) 3/8"-16 4" (101.6) 217/32" (64.3) B386-11/2 11/2" (40) 3/8"-16 45/16" (109.6) 211/16" (68.3) (50) 3/8"-16 51/2" (139.7) 35/16" (84.1) (65) 1/2"-13 63/8" (161.9) 31/2" (88.9) (80) 1/2"-13 7" (177.8) 37/8" (98.4) (90) 1/2"-13 79/16" (192.1) 41/8" (104.8) (100) 1/2"-13 85/8" (219.1) 43/8" (111.1) 93/4" (131.8) B386-3/4 B386-1 2" B386-2 B386-21/2 21/2" 3" B386-3 B386-31/2 31/2" 4" B386-4 B386-5 5" (125) 5/8"-11 (247.6) 53/16" B386-6 6" (150) 5/8"-11 115/8" (295.3) 61/16" (154.0) B386-8 8" (200) 3/4"-10 137/8" (352.4) 71/8" (181.0) Design Load Part No. Pipe Size 3/4" 1" B386-11/4 B386-11/2 B386-3/4 B386-1 B386-2 B386-21/2 B386-31/2 B386-4 B386-5 B386-6 B386-8 'W' Wt./C Lbs. kN Lbs. kg (20) 1/8" (3.2) 1" (25.4) 730 (3.25) 46 (20.8) (25) 1/8" (3.2) 1" (25.4) 730 (3.25) 51 (23.1) 11/4" (32) 1/8" (3.2) 1" (25.4) 730 (3.25) 52 (23.6) 11/2" (40) 1/8" (3.2) 1" (25.4) 730 (3.25) 54 (24.5) 2" (50) 1/4" (6.3) 1" (25.4) 730 (3.25) 134 (60.8) 21/2" (65) 1/4" (6.3) 1" (25.4) 1350 (6.00) 157 (71.2) (80) 1/4" (6.3) 1" (25.4) 1350 (6.00) 168 (76.2) (90) 1/4" (6.3) 1" (25.4) 1350 (6.00) 197 (89.3) (100) 1/4" (6.3) 11/4" (31.7) 1350 (6.00) 270 (122.4) (125) 1/4" (6.3) 11/4" (31.7) 2160 (9.61) 308 (139.7) (150) 3/8" (9.5) 11/2" (38.1) 2160 (9.61) 609 (276.2) (200) 3/8" (9.5) 11/2" (38.1) 3230 (14.37) 713 (323.4) 3" B386-3 'T' 31/2" 4" 5" 6" 8" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 55 Pipe Hangers Part No. Pipe Hangers Material: Steel (Stainless steel available) 'A' 9/16" Standard Finish: Plain or Electro-Plated Dia. (14.3) Service: Designed for supporting light pipe runs with a 1" (25.4) offset from mounting surfaces. Steel Size 'B' 5" 1" (127.0) (25.4) Ordering: Specify part number and finish. Figure B3190 Offset J-Hook Part No. Nominal Pipe Size Design Load 'A' 'B' Steel Size Wt./C Lbs. kN Lbs. kg B3190-1/2 1/2" (15) 115/32" (37.3) 625/32" (172.2) 3/16" x 11/4" (4.8 x 31.7) 200 (.89) 56 (25.4) B3190-3/4 3/4" (20) 19/16" (39.7) 67/8" (174.6) 3/16" x 11/4" (4.8 x 31.7) 200 (.89) 59 (26.7) 1" (25) 111/16" (42.9) 71/16" (179.4) 1/4" x 11/4" (6.3 x 31.7) 200 (.89) 81 (36.7) (32) 17/8" (47.6) 71/4" (184.1) 1/4" x 11/4" (6.3 x 31.7) 200 (.89) 86 (39.0) (40) 131/32" (50.0) 711/32" (186.5) 1/4" x 11/4" (6.3 x 31.7) 200 (.89) 89 (40.4) x 11/4" B3190-1 B3190-11/4 11/4" B3190-11/2 11/2" B3190-2 B3190-21/2 B3190-3 B3190-4 2" (50) 27/32" (56.3) 719/32" (192.9) 1/4" (6.3 x 31.7) 200 (.89) 96 (43.5) 21/2" (65) 215/32" (62.7) 727/32" (199.2) 1/4" x 11/2" (6.3 x 38.1) 350 (1.55) 125 (56.7) 3" (80) 225/32" (70.6) 85/32" (207.1) 1/4" x 11/2" (6.3 x 38.1) 350 (1.55) 134 (60.8) (100) 39/32" (83.3) 825/32" (223.0) 3/8" 11/2" (9.5 x 38.1) 450 (2.00) 226 (102.5) 4" x Material: Steel (Stainless steel available) Pipe Hangers 'A' Standard Finish: Plain or Electro-Plated 'B' 9/16" 5" Service: Designed for supporting light pipe runs which require no clearance between mounting surfaces. Dia. (14.3) (127.0) Ordering: Specify part number, size and finish. Steel Size Figure B3191 Straight J-Hook Part No. Nominal Pipe Size B3191-1/2 1/2" B3191-3/4 3/4" B3191-1 1" Design Load 'A' (15) 21/32" (20) 3/4" (25) 15/16" 'B' (16.6) 625/32" (19.0) 67/8" (23.8) 71/16" Steel Size Wt./C Lbs. kN Lbs. kg (172.2) 3/16" x 11/4" (4.8 x 31.7) 200 (.89) 54 (24.5) (174.6) 3/16" x 11/4" (4.8 x 31.7) 200 (.89) 56 (25.4) (179.4) 1/4" x 11/4" (6.3 x 31.7) 200 (.89) 78 (35.4) x 11/4" B3191-11/4 11/4" (32) 11/8" (28.6) 71/4" (184.1) 1/4" (6.3 x 31.7) 200 (.89) 84 (38.1) B3191-11/2 11/2" (40) 17/32" (30.9) 711/32" (186.5) 1/4" x 11/4" (6.3 x 31.7) 200 (.89) 86 (39.0) 2" (50) 115/32" (37.3) 719/32" (192.9) 1/4" x 11/4" (6.3 x 31.7) 200 (.89) 93 (42.2) 21/2" (65) 123/32" (43.6) 727/32" (199.2) 1/4" x 11/2" (6.3 x 38.1) 350 (1.55) 120 (54.4) (80) 21/32" (51.6) 83/8" (212.7) 1/4" x 11/2" (6.3 x 38.1) 350 (1.55) 134 (60.8) (100) 221/32" (67.4) 825/32" (223.0) 3/8" 11/2" (9.5 x 38.1) 450 (2.00) 223 (101.1) B3191-2 B3191-21/2 B3191-3 B3191-4 3" 4" x All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 56 Pipe Hangers 'A' (Rod Size) Material: Steel Service: Designed for use with a light piping system where vertical movement does not exceed 11/4" (31.7). 'C' Ordering: Specify part number and finish. 'D' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 49 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 48. 'B' 'A' (Rod Size) Figure B3262 Light Duty Spring Hanger Part No. Rod Size 'A' Spring Color B3262-3/8 3/8"-16 Brown 2" (50.8) 23/4" (69.8) 41/2" (114.3) B3262-1/2 1/2"-13 Black 2" (50.8) 23/4" (69.8) 41/2" (114.3) B3262-5/8 5/8"-11 Red 2" (50.8) 23/4" (69.8) 41/2" (114.3) B3262-3/4 3/4"-10 Orange 2" (50.8) 3" (76.2) 7" (177.8) In 'C' Rated Load 'D' Wt./C mm Lbs. kN Lbs. kg B3262-3/8 1.20 (30.1) 100-150 (.44 - .67) 390 (176.2) B3262-1/2 1.10 (27.7) 150-250 (.67 - 1.11) 410 (186.0) B3262-5/8 1.00 (25.4) 350-450 (1.56 - 2.00) 470 (213.2) B3262-3/4 1.20 (30.1) 600-750 (2.67 - 3.34) 1240 (562.6) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 57 Pipe Hangers Spring Deflection Part No. ‘B’ Pipe Hangers Material: Steel Standard Finish: Zinc Phosphate Service: The Parallel Strap Hanger series is designed for suspending up to 1" (50.8) wide straps parallel to beams. The Right Angle Strap Hanger series is designed for suspending up to 1" (50.8) wide straps at right angle to the beam. Note: Install clip to beam with hammer. Ordering: Specify part number and finish. Parallel Strap Right Angle Strap Figure BH-2-4, BH-5-8, BH-9-12 Parallel Strap Hangers Figure BH-2-4-R, BH-5-8-R, BH-9-12-R Right Angle Strap Hangers Wt./C Part No. Parallel Right Angle BH-2-4 BH-5-8 BH-9-12 Maximum Load Flange Thickness BH-2-12 BH-2-12R Lbs. kN Lbs. kg Lbs. kg BH-2-4-R 1/8" to 1/4" (3.2 to 6.3) 200 (.89) 4.5 (2.0) 6.0 (2.7) BH-5-8-R 5/16" to 1/2" (7.9 to 12.7) 200 (.89) 5.0 (2.3) 6.5 (2.9) BH-9-12-R 9/16" to 3/4" (14.3 to 19.0) 200 (.89) 5.5 (2.5) 7.0 (3.2) Design Load is a static straight down load. 'W' Material: Steel Pipe Hangers Standard Finish: Electro-Plated Service: Designed to support or suspend light duty stationary pipe runs. Pipe Size 'T' Ordering: Specify part number. 'A' Hole Size 'B' Figure BL1400 Hanger Part No. Pipe Size BL1400 1/2" BL1410 3/4" 'A' (15) 29/32" (20) 31/32" 'B' 'T' (23.0) 9/32" (24.6) 9/32" (31.7) 9/32" (7.1) (35.7) 9/32" (7.1) (7.1) (7.1) 'W' Wt./C Lbs. kg (1.5) 3/4" (19.0) 6 (2.7) (1.5) 3/4" (19.0) 7 (3.2) 16 Ga. (1.5) 3/4" (19.0) 8 (3.6) 18 Ga. (1.5) 7/8" (22.2) 10 (4.5) 16 Ga. 16 Ga. BL1420 1" (25) 11/4" BL1430 11/4" (32) 113/32" BL1440 11/2" 40) 55/8" (41.3) 11/32" (8.7) 16 Ga. (1.5) 1" (25.4) 17 (7.7) BL1450 2" (50) 17/8" (47.6) 11/32" (8.7) 16 Ga. (1.5) 11/4" (31.7) 25 (11.3) BL1460 21/2" (65) 21/16" (52.4) 11/32" (8.7) 16 Ga. (1.5) 11/4" (31.7) 26 (11.8) (63.5) 11/32" (8.7) 16 Ga. (1.5) 11/4" (31.7) 33 (14.9) (69.8) 11/32" (8.7) 16 Ga. (1.5) 11/4" (31.7) 36 (16.3) (88.9) 11/32" (1.5) 11/4" (31.7) 40 (18.1) BL1470 3" (80) 21/2" BL1480 31/2" (90) 23/4" (100) 31/2" BL1490 4" (8.7) 16 Ga. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 58 Pipe Hangers Pipe Hangers All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 59 Pipe Clamps Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. A wide range of pipe clamps are available for various applications. Materials Pipe Clamps Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and ElectroPlated Zinc (ASTM B 633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A 123), Red Primer, Plastic Coating, DuraGreen® and other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, Copper Plated, or in Stainless Steel. Recommended Torque (Pipe Clamp Hardware) 1/4”-20 6 ft/lbs (8 Nm) 5/16”-18 11 ft/lbs (19 Nm) 3/8”-16 19 ft/lbs (26 Nm) 1/2”-13 50 ft/lbs (68 Nm) 5/8”-11 65 ft/lbs (88 Nm) 3/4”-10 & larger 75 ft/lbs (101 Nm) Approvals (as noted) Items in this section are Underwriters' Laboratories Listed, comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society MSS SP-69 & SP-58. All pipe hangers and supports in this section are sized to fit schedule 40/80 pipe unless otherwise noted. Some steel items may be specially fabricated to fit other pipe diameters i.e. ductile iron, cast iron, etc. Select pipe O.D. from charts on pages 236 thru 241. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 60 Pipe Clamps Material: Steel (Stainless steel available) Design Load Standard Finish: Plain, Electro-Plated, Dura-Green® or Hot-Dip Galvanized Service: Designed for supporting and stabilizing vertical pipe runs. Clamp is fitted for steel pipe and preferably installed below a coupling or shear lugs. Torque bolts to values given on page 60. Ordering: Specify part number and finish. Approvals: Underwriters' Laboratories Listed for B3373-3/4" thru B3373-8". Complies with Federal Specification WW-H-171E & A-A-1192A Type 8 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 8. Bolt Size Bolts and Nuts Included 'L' B3373C Figure B3373 Standard Riser Clamp (Available with plastic coating as B3373C-size) Nominal Pipe Size Design Load 'L' Wt./C Bolt Size Lbs. kN Lbs. kg B3373-1/2 1/2" (15) 9" (228.6) 3/8"-16 x 11/4" 255 (1.13) 101 (45.9) B3373-3/4 3/4" (20) 91/4" (234.9) 3/8"-16 x 11/4" 255 (1.13) 105 (47.7) 1" (25) 99/16" (242.9) 3/8"-16 x 11/4" 255 (1.13) 109 (49.4) (32) 10" (254.0) 3/8"-16 x 11/4" 255 (1.13) 112 (50.9) (40) 101/4" (260.3) 3/8"-16 x 11/2" 255 (1.13) 113 (51.1) B3373-1 B3373-11/4 11/4" B3373-11/2 B3373-2 B3373-21/2 B3373-3 11/2" (50) 103/4" (273.0) 3/8"-16 x 11/2" 255 (1.13) 165 (75.0) 21/2" (65) 111/4" (285.7) 3/8"-16 x 11/2" 390 (1.73) 180 (81.6) 3" (80) 1115/16" (303.2) 3/8"-16 x 11/2" 530 (2.35) 195 (88.4) (90) 123/8" (314.3) 1/2"-13 x 13/4" 670 (2.98) 217 (98.5) (100) 127/8" (327.0) 11/2"-13 x 13/4" 810 (3.60) 228 (103.5) (355.6) 1/2"-13 x 13/4" 1160 (5.16) 480 (217.7) (385.8) 1/2"-13 x 2" 2" B3373-31/2 31/2" B3373-4 B3373-5 B3373-6 B3373-8 B3373-10 4" 5" 6" 8" 10" (125) 14" (150) 153/16" (200) 173/4" (250) 197/16" 1570 (6.98) 526 (238.6) (450.8) 5/8"-11 x 21/2" 2500 (11.12) 957 (434.1) (493.7) 5/8"-11 x 21/2" 2500 (11.12) 1101 (499.4) B3373-12 12" (300) 2111/16" (550.9) 5/8"-11 B3373-14 14" (350) 239/16" (598.5) 5/8"-11 B3373-16 16" (400) 263/8" (669.9) 3/4"-10 x 31/4" 2900 (12.90) 2959 (1342.2) B3373-18 18" (450) 287/8" (733.4) 3/4"-10 x 31/4" 2900 (12.90) 3235 (1467.4) B3373-20 20" (500) 307/8" (784.2) 3/4"-10 x 31/2" 2900 (12.90) 3568 (1618.4) B3373-24 24" (600) 347/8" (885.8) 3/4"-10 x 31/2" 2900 (12.90) 4064 (1843.3) (750) 403/4" (1035.0) 7/8"-9 x 31/2" 2900 (12.90) 6016 (2728.8) B3373-30 30" x 3" 2700 (12.01) 1622 (735.7) x 3" 2700 (12.01) 1732 (785.6) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 61 Pipe Clamps Part No. Pipe Clamps Material: Steel Design Load Standard Finish: Dura-Copper® Service: Designed to support and stabilize vertical runs of copper tubing. (Available with plastic coating to provide additional separation between tubing and hanger). Torque bolts to values given on page 60. Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 8 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 8. Bolt Size 'L' Bolts and Nuts Included B3373CT B3373CTC Figure B3373CT Riser Clamp (Available with plastic coating as B3373CTC-size) Part No. Nominal Tubing Size Design Load 'L' Bolt Size Wt./C Lbs. kN Lbs. kg Pipe Clamps B3373CT-1/2 1/2" (15) 83/4" (222.2) 5/16"-18 x 1" 75 (.33) 72 (32.6) B3373CT-3/4 3/4" (20) 91/16" (234.9) 5/16"-18 x 1" 75 (.33) 73 (33.2) (25) 95/16" (236.5) 3/8"-16 x 1" 120 (.53) 74 (33.6) (32) 95/8" (244.5) 3/8"-16 x 1" 150 (.67) 77 (34.8) (40) 93/4" (247.6) 3/8"-16 x 11/4" 150 (.67) 111 (50.3) B3373CT-1 1" B3373CT-11/4 11/4" B3373CT-11/2 11/2" B3373CT-2 B3373CT-21/2 B3373CT-3 B3373CT-31/2 B3373CT-4 B3373CT-5 B3373CT-6 2" (50) 107/16" (265.1) 3/8"-16 x 11/4" 150 (.67) 120 (54.5) 21/2" (65) 1015/16" (277.8) 3/8"-16 x 11/4" 300 (1.33) 128 (58.1) 3" (80) 117/16" (290.5) 3/8"-16 x 11/4" 300 (1.33) 136 (61.5) 31/2" (90) 1115/16" (303.2) 3/8"-16 x 11/4" 300 (1.33) 145 (65.7) (100) 121/2" (317.5) 1/2"-13 300 (1.33) 170 (77.3) (125) 135/8" (150) 145/8" 4" 5" 6" x 13/4" (346.1) 1/2"-13 x 2" 500 (2.22) 355 (161.0) (371.5) 1/2"-13 x 2" 500 (2.22) 386 (175.1) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 62 Pipe Clamps Material: Steel Standard Finish: Plain or Electro-Plated (Hot-Dip Galvanized available) Steel Size Service: Designed to prevent separation of caulked joints on AWWA ductile iron water pipes. Bolt Size Ordering: Specify part number and finish. (Order B3132W Lug Washers, Tie Rods, and Hex Nuts separately). 'A' 'B' Bolts and Nuts Included Figure B3132 Two-Bolt Underground Clamp 'A' (100) 127/8" (150) 143/4" (200) 171/4" (250) 193/8" B3132-12 12" (300) 217/8" B3132-14 14" (350) 26" B3132-16 16" (400) B3132-18 18" 4" B3132-4 6" B3132-6 8" B3132-8 B3132-10 10" B3132-20 20" B3132-24 24" Clamp 'I.D.' 'B' 93/4" (327.0) (247.6) 5" (304.8) 71/16" (361.9) 93/16" (419.1) 113/8" (479.4) 131/2" Wt./C Steel Size Bolt Size Lbs. kg (12.7 x 50.8) 5/8"-11 x 3" 864 (391.9) (12.7 x 50.8) 5/8"-11 x 3" 1020 (462.6) (12.7 x 50.8) 5/8"-11 x 3" 1222 (554.3) 1409 (639.1) (127.0) 1/2" x 2" (179.4) 1/2" x 2" (233.4) 1/2" x 2" (288.9) 1/2" x 2" (12.7 x 50.8) 5/8"-11 x 3" (374.6) 12" (438.1) 141/4" (492.1) 161/2" (555.6) 187/8" (342.9) 1/2" x 2" (12.7 x 50.8) 5/8"-11 x 3" 1608 (729.4) (660.4) 221/4" (565.1) 153/4" (400.0) 3/4" x 3" (19.0 x 76.2) 7/8"-9 x 41/2" 4359 (1977.2) 283/8" (720.7) 245/8" (625.5) 177/8" (454.0) 3/4" x 4" (19.0 x 101.6) 1"-8 x 41/2" 6403 (2904.4) (450) 313/8" (796.9) 275/8" (701.7) (508.0) 3/4" x 4" (19.0 x 101.6) 11/4"-7 x 5" 7293 (3308.1) (500) 331/2" (850.9) 293/4" (562.0) 3/4" x 41/2" (19.0 x 114.3) 11/4"-7 x 5" 8778 (3981.7) (990.6) 351/4" (669.9) 3/4" x 5" (19.0 x 127.0) 11/4"-6 x 51/2" (600) 39" 20" (755.6) 221/8" (895.3) 263/8" 'D' Dia. Material: Ductile iron for B3132W-3/4, steel for other sizes. 'D' Dia. 'E' 11659 (5288.5) 'E' Standard Finish: Plain or Electro-Plated Service: Designed to use with B3132 Two-Bolt Underground Clamp for aligning and securing tie rods. 'F' 'H' 'H' 'G' 'G' B3132W-3/4 Ordering: Specify part number and finish. B3132W-1 thru 11/2 Figure B3132W Lug Washer Part No. B3132W-3/4 Tie Rod Size 3/4"-10 For Use With Pipe Size 4"-12" Dia. 'D' (100-300) 7/8" 11/8" Wt./C 'E' 'F' 'G' 'H' (22.2) 23/8" (60.3) -- -- 5/8" (15.9) 15/8" (88.9) 31/2" (88.9) 5/8" (15.9) 21/2" (88.9) 4" (101.6) 5/8" (15.9) 31/2" (63.5) Lbs. kg (41.3) 74 (33.7) (63.5) 207 (93.9) 1"-8 14"-16" (350-400) (28.6) 31/2" B3132W-11/4 11/4"-7 18" (450) 13/8" (34.9) 31/2" B3132W-13/8 13/8"-6 20" (500) 11/2" (38.1) 4" (101.6) 41/4" (107.9) 5/8" (15.9) 4" (101.6) 231 (104.8) B3132W-11/2 11/2"-6 (600) 15/8" 4" (101.6) 43/4" (120.6) 5/8" (15.9) 4" (101.6) 259 (117.5) B3132W-1 24" (41.3) 236 (107.0) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 63 Pipe Clamps Nominal Part No. Pipe Size Pipe Clamps Material: Steel Steel Size Standard Finish: Plain or Electro-Plated 'A' Service: Designed to prevent separation of caulked joints on AWWA ductile iron water pipes. Bolt Size 'B' Ordering: Specify part number and finish. (Order B3134W Washer, tie rods, and hex nuts separately). Bolts and Nuts Included Approvals: Complies with National Fire Protection Association Standard 24 for 4" (100) thru 12" (300). Figure B3134 Four Bolt Underground Clamp Part No. B3134-4 B3134-6 B3134-8 B3134-10 B3134-12 B3134-14 B3134-16 B3134-18 B3134-20 B3134-24 Nominal Pipe Size 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 'A' 147/16" 167/8" 191/8" 213/8" 251/8" 281/4" 321/8" 351/8" 373/4" 441/4" (100) (150) (200) (250) (300) (350) (400) (450) (500) (600) Clamp 'I.D.' 'B' (366.7) (428.6) (485.8) (542.9) (638.2) (717.5) (816.0) (892.2) (958.8) (1123.9) 95/8" 117/8" 141/8" 165/8" 195/8" 221/4" 261/4" 281/8" 301/2" 36" (301.6) (358.8) (422.3) (498.5) (565.1) (666.7) (714.4) (774.7) (914.4) Maximum Test Pressure Part No. B3134-4 B3134-6 B3134-8 B3134-10 B3134-12 B3134-14 B3134-16 B3134-16 B3134-20 B3134-24 Bolt Size 5/8"-11 x 3" x 3" 5/8"-11 x 31/2" 3/4"-10 x 4" 7/8"-9 x 4" 7/8"-9 x 41/2" 1"-8 x 41/2" 11/4"-7 x 5" 11/4"-7 x 5" 1 1 /2"-6 x 51/2" 5/8"-11 5" 1 7 /8" 95/16" 111/2" 131/2" 153/4" 177/8" 20" 221/8" 263/8" (244.5) Steel Size (127.0) (181.0) (236.5) (292.1) (342.9) (400.0) (454.0) (508.0) (562.0) (669.9) 1/2" x 2" 1/2" x 2" 5/8" x 21/2" 5/8" x 21/2" 5/8" x 3" 3/4" x 3" 3/4" x 4" 3/4" x 4" 3/4" x 41/2" 3/4" x 5" Force On Clamp (12.7 x 50.8) (12.7 x 50.8) (15.9 X 63.5) (15.9 X 63.5) (15.9 x 76.2) (19.0 x 76.2) (19.0 x 101.6) (19.0 x 101.6) (19.0 x 114.3) (19.0 x 127.0) Wt./C psi Pa Lbs. kN Lbs. kg 250 250 250 250 250 120 115 100 75 50 (1722.5) 4550 9340 16080 24180 34230 22200 27760 23900 27500 26200 (20.24) 1012 1204 2091 2466 3537 4718 7155 8179 9856 13384 (459.0) (1722.5) (1722.5) (1722.5) (1722.5) (826.8) (792.3) (689.0) (516.7) (344.5) (41.54) (71.52) (107.55) (152.25) (98.74) (123.47) (106.31) (122.32) (116.54) (546.1) (948.5) (1118.6) (1604.4) (2140.1) (3245.5) (3710.0) (4470.7) (6071.0) Pipe Clamps For higher test pressure requirements, consult pipe manufacturer. Material: Steel 'D' Dia. 'F' 'E' Service: Designed for use with B3134 Four-Bolt Underground Clamp to secure tie rods. 'E' Ordering: Specify part number and finish. Figure B3134W Washer Part No. Tie Rod Size B3134W-3/4 B3134W-1 3/4"-10 B3134W-11/8 11/8"-7 B3134W-11/4 11/4"-7 B3134W-13/8 13/8"-6 B3134W-11/2 11/2"-6 1"-9 For Use With Pipe Size Dia. 'D' (250-300) 7/8" 11/8" 14"-16" 18" 20" 4"-8" 10"-12" 24" Standard Finish: Plain or Electro-Plated Wt./C 'E' Lbs. kg (54.0) (76.2) 1/2" (12.7) (88.9) 1/2" (12.7) 119 159 (31.7) 31/2" (88.9) 5/8" (15.9) 181 (82.1) (34.9) 4" (101.6) 3/4" (19.0) 229 (103.9) (38.1) 4" (101.6) 3/4" (19.0) 223 (101.1) (41.3) 41/2" (114.3) 3/4" (19.0) 217 (98.4) (28.6) 3" 31/2" (350-400) 11/4" (450) 13/8" (500) 11/2" (600) 15/8" (100-200) 'F' (22.2) (72.1) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 64 Pipe Clamps Bolt Size 'B' Center of pipe to center of bolts. Bolts and Nuts Included 'B' 'C' 'A' Design Load Figure B3140 Standard Pipe Clamp Part No. B3140-1/2 B3140-3/4 B3140-1 B3140-11/4 B3140-11/2 B3140-2 B3140-21/2 B3140-3 B3140-31/2 B3140-4 B3140-5 B3140-6 B3140-8 B3140-10 B3140-12 B3140-14 B3140-16 B3140-18 B3140-20 B3140-24 B3140-30 Part No. B3140-1/2 B3140-3/4 B3140-1 B3140-11/4 B3140-11/2 B3140-2 B3140-21/2 B3140-3 B3140-31/2 B3140-4 B3140-5 B3140-6 B3140-8 B3140-10 B3140-12 B3140-14 B3140-16 B3140-18 B3140-20 B3140-24 B3140-30 Nominal Pipe Size 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 31/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" (15) (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) (750) Bolt Size 5/16"-18 x 11/4" 5/16"-18 x 11/4" 5/16"-18 x 11/4" 5/16"-18 x 11/4" 5/16"-18 x 11/4" 1/2"-13 x 2" 1/2"-13 x 2" 1/2"-13 x 2" 1/2"-13 x 2" 5/8"-11 x 21/4" 5/8"-11 x 21/2" 3/4"-10 x 23/4" 3/4"-10 x 3" 7/8"-9 x 31/2" 7/8"-9 x 31/2" 7/8"-9 x 31/2" 7/8"-9 x 31/2" 1"-8 x 4" 11/8"-7 x 41/2" 11/4"-7 x 5" 11/2"-6 x 6" 'A' 3/8" 9/16" 9/16" 17/32" 19/32" 9/16" 5/8" 5/8" 5/8" 3/4" 3/4" 7/8" 1" 1" 1" 11/8" 11/8" 11/4" 13/8" 15/8" 21/4" 'B' (9.5) (14.3) (14.3) (13.5) (15.1) (14.3) (15.9) (15.9) (15.9) (19.0) (19.0) (22.2) (25.4) (25.4) (25.4) (28.6) (28.6) (31.7) (34.9) (41.3) (57.1) 31/32" 13/32" 15/16" 17/16" 121/32" 21/8" 221/32" 215/16" 35/32" 39/16" 41/8" 415/16" 61/16" 73/8" 87/16" 91/4" 101/4" 117/8" 123/4" 151/4" 185/8" 'C' 117/32" 121/32" 17/8" 2" 27/32" 23/4" 39/32" 39/16" 325/32" 45/16" 47/8" 513/16" 615/16" 811/16" 93/4" 105/8" 115/8" 131/4" 141/8" 167/8" 21" (24.6) (27.8) (33.3) (36.5) (42.0) (54.0) (67.5) (74.6) (80.1) (90.5) (104.8) (125.4) (154.0) (187.3) (214.3) (234.9) (260.3) (301.6) (323.8) (387.3) (473.1) (38.9) (42.0) (47.6) (50.8) (56.4) (69.8) (83.3) (90.5) (96.0) (109.5) (123.8) (147.6) (176.2) (220.7) (247.6) (269.9) (295.3) (336.5) (358.8) (428.6) (533.4) Maximum Design Load For Service Temperature 650°F (343°C) 750°F (399°C) Lbs. kN Lbs. 500 500 500 500 800 1040 1040 1040 1040 1040 1040 1615 1615 2490 2490 2490 2490 3060 3060 3060 3500 (2.22) (2.22) (2.22) (2.22) (3.56) (4.62) (4.62) (4.62) (4.62) (4.62) (4.62) (7.18) (7.18) (11.07) (11.07) (11.07) (11.07) (13.61) (13.61) (13.61) (15.57) 390 390 390 390 620 810 810 810 810 810 810 1260 1260 1950 1950 1950 1950 2390 2390 2390 2740 kN (1.73) (1.73) (1.73) (1.73) (2.76) (3.60) (3.60) (3.60) (3.60) (3.60) (3.60) (5.60) (5.60) (8.67) (8.67) (8.67) (8.67) (10.63) (10.63) (10.63) (12.14) Wt./C Lbs. kg 30 31 32 39 41 118 130 150 158 239 272 541 642 1366 1543 2077 2289 3206 3616 5161 10460 (13.6) (14.0) (14.5) (17.7) (18.6) (53.5) (58.9) (68.0) (71.6) (108.4) (123.4) (245.4) (291.2) (619.6) (699.9) (942.1) (1038.3) (1454.2) (1640.2) (2341.0) (4744.6) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 65 Pipe Clamps 'B' 'C' Material: Steel (Stainless steel available) Standard Finish: Plain, Electro-Plated, Dura-Green® or Hot-Dip Galvanized Service: Designed for suspending non-insulated pipe runs. (Use with B3200 Weldless Eye Nut, B3210 Eye Rod, or B3211 Welded Eye Rod). Ordering: Specify part number and finish. Approvals: Underwriters' Laboratories Listed for 3/4" (20) thru 12" (300). Complies with Federal Specification WW-H-171E & A-A-1192A Type 4 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 4. Pipe Clamps Bolt Size Material: Steel Standard Finish: Plain or Electro-Plated Service: Designed for suspending non-insulated, heavy-duty pipe runs. (Use with B3200 Weldless Eye Nut, B3210 Eye Rod or B3211 Welded Eye Rod). 'B' 'C' 'B' Center of pipe to center of bolts. Ordering: Specify part number and finish. 'B' 'A' 'C' Bolts, Nuts and Spacer Included Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 4 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 4. Design Load Figure B3142 Heavy Duty Pipe Clamp Part No. Nominal Pipe Size 'A' 'B' 'C' B3142-3 3" (80) 1" (25.4) 31/8" (79.4) 41/8" (104.8) B3142-4 4" (100) 1" (25.4) 33/4" (95.2) 51/16" (128.6) B3142-5 5" (125) 1" (25.4) 43/8" (111.1) 511/16" (144.5) B3142-6 6" (150) 11/8" (28.6) 51/4" (133.3) 61/4" (171.4) (200) 11/8" (28.6) 61/4" (158.7) 73/4" (196.8) (250) 11/4" (31.7) 711/16" (195.3) 91/16" (230.2) (300) 15/8" (41.3) 91/8" (231.8) 103/4" (273.0) B3142-8 B3142-10 B3142-12 8" 10" 12" B3142-14 14" (350) 15/8" (41.3) 101/8" (257.2) 12" (304.8) B3142-16 16" (400) 15/8" (41.3) 11" (279.4) 127/8" (327.0) B3142-18 18" (450) 3" (76.2) 141/2" (368.3) 181/2" (469.9) B3142-20 20" (500) 3" (76.2) 16" (406.4) 20" (508.0) (600) 31/4" (82.5) 181/2" (469.9) 23" (584.2) (750) 31/2" (88.9) 221/2" (571.5) 271/2" (698.5) B3142-24 B3142-30 24" 30" Pipe Clamps Maximum Design Load For Service Temperature 650°F (343°C) 750°F (399°C) Part No. B3142-3 Bolt Size 3/4"-10 Lbs. kN x 23/4" 3370 (14.99) 3515 (15.63) B3142-4 7/8"-9 x 3" B3142-5 7/8"-9 Lbs. Wt./C kN Lbs. kg 2640 (11.74) 404 (183.2) 2750 (12.23) 616 (279.4) x 3" 3515 (15.63) 2750 (12.23) 687 (311.6) 1"-8 x 31/2" 4865 (21.64) 3800 (16.90) 1293 (586.5) B3142-8 1"-8 x 4" 4865 (21.64) 3800 (16.90) 1523 (690.8) B3142-10 11/4"-7 x 4" 6010 (26.73) 4700 (20.90) 2348 (1065.0) B3142-12 11/4"-7 x 5" 3749 (1700.5) B3142-6 8675 (38.58) 6770 (30.11) B3142-14 11/2"-6 51/2" 9120 (40.56) 7140 (31.76) 5011 (2273.0) B3142-16 13/4"-5 x 51/2" 9120 (40.56) 7140 (31.76) 5885 (2669.4) B3142-18 B3142-20 x 2"-41/2 x 7" 2"-41/2 x 71/2" B3142-24 2"-41/2 B3142-30 21/4"-41/2 x 8" x 9" 13800 (61.38) 10800 (48.04) 12902 (5852.3) 15300 (68.05) 11900 (52.93) 15113 (6855.2) 16300 (72.50) 12700 (56.49) 20561 (9326.4) 20500 (91.18) 16000 (71.17) 36658 (16628.0) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 66 Pipe Clamps Bolt Size 'B2' Material: Steel (Stainless steel available) Standard Finish: Plain or Electro-Plated 'C' Center of pipe to center of clamping bolts. Service: Designed for suspending high-temperature (maximum 750°F (399°C) pipe runs requiring up to 4" (101.6) thick insulation. (Use with B3200 Weldless Eye Nut, B3210 Eye Rod or B3211 Welded Eye Rod). Bolt Size 'B1' 'D' 'D' Center of pipe to center of top bolt. 'E' 'C' Ordering: Specify part number and finish. For Service o Temperatures of 750°F (399°C) thru 1050 F (565°C) specify type 304 Stainless Steel. Bolt Size 'B1' 'C' Bolts, Nuts and Spacer Included 'F' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 3 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 3. Design Load 'A' Figure B3144 Double Bolt Pipe Clamp B3144-3/4 B3144-1 B3144-11/4 B3144-11/2 B3144-2 B3144-21/2 B3144-3 B3144-4 B3144-5 B3144-6 B3144-8 B3144-10 B3144-12 B3144-14 B3144-16 B3144-18 B3144-20 B3144-24 Nominal Pipe Size 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" Bolt Size 'B1' 'A' (20) 5/8" (15.9) 3/8"-16 (25) 5/8" (15.9) 3/8"-16 (32) 5/8" (15.9) (60) 11/16" 11/16" 11/16" 11/16" 11/16" 11/16" 17/16" 17/16" 17/16" 17/16" 2" 2" 2" 2" 2" (27.0) (50) (65) (80) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) (27.0) (27.0) (27.0) (27.0) (27.0) (36.5) (36.5) (36.5) (36.5) (50.8) (50.8) (50.8) (50.8) (50.8) Bolt Size 'B2' 13/4" x x 13/4" 3/8"-16 x 13/4" 1/2"-13 x 21/2" 1/2"-13 x 21/2" 1/2"-13 x 21/2" 1/2"-13 x 21/2" 5/8"-11 x 23/4" 5/8"-11 x 23/4" 3/4"-10 x 31/4" 3/4"-10 x 31/4" 3/4"-10 x 31/4" 3/4"-10 x 31/4" 1"-8 x 41/2" 1"-8 x 41/2" 1"-8 x 41/2" 1"-8 x 5" 11/8"-7 x 5" 'C' 13/8" (34.9) 1/2"-13 13/8" 11/2" 113/16" 21/8" 23/8" 215/16" 31/2" 4" 5" 6" 71/8" 77/8" 91/16" 101/16" 111/16" 123/8" 143/4" (34.9) x 2" x 2" 1/2"-13 x 2" 5/8"-11 x 21/2" 5/8"-11 x 21/2" 5/8"-11 x 21/2" 5/8"-11 x 21/2" 3/4"-10 x 3" 3/4"-10 x 3" 1"-8 x 31/2" 1"-8 x 31/2" 1"-8 x 31/2" 1"-8 x 31/2" 11/4"-7 x 5" 11/4"-7 x 5" 11/4"-7 x 5" 11/4"-7 x 5" 11/2"-6 x 51/2" Maximum Design Load For Service Temperature 650°F (343°C) 750°F (399°C) Part No. B3144-3/4 'E' 43/4" B3144-1 43/4" B3144-11/4 43/4" B3144-11/2 47/8" B3144-2 57/8" B3144-21/2 61/8" B3144-3 611/16" B3144-4 75/8" B3144-5 81/8" B3144-6 915/16" B3144-8 1015/16" B3144-10 12" B3144-12 13" B3144-14 145/16" B3144-16 155/16" B3144-18 165/16" B3144-20 171/2" B3144-24 191/2" 'F' (120.6) 17/8" (47.6) (120.6) 17/8" 2" 23/8" 211/16" 215/16" 31/2" 41/2" 5" 61/8" 71/8" 81/4" 91/4" 1011/16" 1111/16" 1211/16" 14" 163/8" (47.6) (120.6) (123.8) (149.2) (155.6) (169.9) (193.7) (206.4) (252.4) (277.8) (304.8) (330.2) (363.5) (388.9) (414.3) (444.5) (495.3) (50.8) (60.3) (68.3) (74.6) (88.9) (114.3) (127.0) (155.6) (181.0) (209.5) (234.9) (271.5) (296.9) (322.3) (355.6) (415.9) 'D' 1/2"-13 4" 4" 4" 41/8" 51/8" 53/8" 515/16" 61/2" 7" 89/16" 99/16" 105/8" 115/8" 1211/16" 1311/16" 1411/16" 157/8" 177/8" (38.1) (46.0) (54.0) (60.3) (74.6) (88.9) (101.6) (127.0) (152.4) (181.0) (200.0) (230.2) (255.6) (281.0) (314.3) (374.6) kN Lbs. kN Lbs. kg 950 950 950 1545 1545 1545 1545 2500 2500 2865 2865 3240 3240 4300 4300 4300 4500 4500 (4.22) 740 740 740 1200 1200 1200 1200 1950 1950 2240 2240 2530 2530 3360 3360 3360 3520 3520 (3.29) 146 147 152 200 226 239 264 672 752 1158 1325 1505 1671 3666 3992 4330 5535 6590 (66.2) (4.22) (6.87) (6.87) (6.87) (6.87) (11.12) (11.12) (12.74) (12.74) (14.41) (14.41) (19.12) (19.12) (19.12) (20.01) (20.01) (3.29) (3.29) (5.34) (5.34) (5.34) (5.34) (8.67) (8.67) (9.96) (9.96) (11.25) (11.25) (14.94) (14.94) (14.94) (15.65) (15.65) (101.6) (101.6) (104.8) (130.2) (136.5) (150.8) (165.1) (177.8) (217.5) (242.9) (269.9) (295.3) (322.3) (347.7) (373.1) (403.2) (454.0) Wt./C Lbs. (4.22) (101.6) (66.7) (68.9) (90.7) (102.5) (108.4) (119.7) (304.8) (341.1) (525.2) (601.0) (682.6) (757.9) (1662.9) (1810.8) (1964.1) (2510.7) (2989.2) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 67 Pipe Clamps Part No. Pipe Clamps Material: Steel Standard Finish: Plain or Electro-Plated Bolts, Nuts and Spacer Included 'C' Center of pipe to center of clamping bolts. Service: Designed for suspending heavy-duty, hightemperature pipe runs requiring up to 4" (101.6) thick insulation. (Use with B3200 Weldless Eye Nut, B3210 Eye Rod, or B3211 Welded Eye Rod). Bolt Size 'B2' 'D' Center of pipe to center of top bolts. Bolt Size 'B1' Ordering: Specify part number and finish. 'D' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 3 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 3. 'E' 'C' Bolt Size 'B1' 'C' 'F' 'A' Design Load Figure B3146 Heavy Duty Double Bolt Pipe Clamp Part No. B3146-6 B3146-8 Nominal Pipe Size 6" 8" (150) Bolt Size 'B1' 'A' 13/4" (44.4) (200) 2" (57.1) (50.8) 3/4"-10 x Bolt Size 'B2' 31/2" 1"-8 x 4" 3/4"-10 x 4" 1"-8 x 1"-8 x 41/2" 11/4"-7 'C' 43/4" 'D' (120.6) 815/16" (227.0) (257.2) 41/2" 6" (152.4) 103/8" x 5" 71/4" (288.9) B3146-10 10" (350) 21/4" (184.1) 113/8" B3146-12 12" (300) 21/2" (63.5) 1"-8 x 5" 11/4"-7 x 51/2" 85/8" (219.1) 129/16" (319.1) B3146-14 14" (450) 21/2" (63.5) 11/8"-7 x 51/2" 11/2"-6 x 6" 95/8" (244.5) 131/2" (342.9) B3146-16 16" (400) 3" (76.2) 11/4"-7 x 6" 13/4"-5 x 61/2" 107/8" (276.2) 147/8" (377.8) (550) 31/2" (317.5) 161/4" (412.7) (500) 31/2" (342.9) 171/4" (438.1) (600) 31/2" (393.7) 195/16" (490.5) (750) 41/4" (504.8) 281/4" (717.5) B3146-18 B3146-20 B3146-24 B3146-30 18" 20" 24" 30" (88.9) 11/2"-6 (88.9) 11/2"-6 (88.9) 11/2"-6 (107.9) 13/4"-5 x 71/2" 2"-41/2 x 8" 121/2" x 71/2" 2"-41/2 x 8" 131/2" x 71/2" 2"-41/2 x 8" 151/2" x 81/2" 21/4"-41/2 x 9" Pipe Clamps Maximum Design Load For Service Temperature 750°F (399°C) 650°F (343°C) Part No. 'E' 'F' B3146-6 103/16" (258.8) B3146-8 113/8" B3146-10 131/8" B3146-12 145/16" B3146-14 151/2" B3146-16 171/8" B3146-18 197/8" Wt./C Lbs. kN Lbs. kN Lbs. kg 6" (152.4) 3500 (15.57) 2740 (12.19) 1182 (536.1) (288.9) 71/4" (184.1) 4800 (21.35) 3750 (16.68) 1742 (790.2) (333.4) 9" (228.6) 5500 (24.46) 4300 (19.12) 2979 (1351.3) (363.5) 103/8" (263.5) 8675 (38.58) 6790 (30.20) 3847 (1745.0) (393.7) 115/8" (295.3) 9500 (42.25) 7400 (32.91) 6104 (2768.8) (435.0) 131/8" (333.4) 10000 (44.48) 7800 (34.69) 7899 (3583.0) 181/4" (463.5) 141/2" (368.3) 13800 (61.38) 10800 (48.04) 10588 (4802.7) B3146-20 193/4" (501.6) 16" (406.4) 15300 (68.05) 11900 (52.93) 14180 (6432.0) B3146-24 225/16" (566.7) 181/2" (469.9) 16300 (72.50) 12700 (56.49) 19145 (8684.2) B3146-30 323/4" (831.8) 243/8" (619.1) 20500 (91.18) 16000 (71.17) 34983 (15868.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 68 Pipe Clamps Design Load Material: Steel (Stainless steel available) Standard Finish: Plain or Electro-Plated Bolt Size 'B' Service: Designed for supporting vertical or horizontal pipe runs at a fixed distance from a wall or structure. 'A' 'C' 'H' 2 Holes Bolts and Nuts Included Ordering: Specify part number and finish. Note: Ductile and cast iron sizes are available. Figure B3148 Offset Pipe Clamp Part No. Nominal Pipe Size B3148-1/2 1/2" B3148-3/4 3/4" Bolt Size 'B' 'A' Design Load 'C' (20) 21/2" (63.5) 3/8"-16 x 11/2" (25) 25/8" kN Lbs. kg (152.4) (11.1) 190 (.84) 106 (48.1) 75/16" (185.7) 7/16" (11.1) 190 (.84) 112 (50.8) (66.7) 3/8"-16 x 11/2" 79/16" (192.1) 7/16" (11.1) 190 (.84) 123 (55.8) B3148-11/4 11/4" (32) 213/16" (71.4) 3/8"-16 x 11/2" 77/8" (200.0) 7/16" (11.1) 190 (.84) 133 (60.3) (209.5) 7/16" (11.1) 190 (.84) 140 (63.5) (11.1) 420 (1.87) 195 (88.4) (11.1) 420 (1.87) 226 (102.5) 1" (63.5) 3/8"-16 x 11/2" Wt./C Lbs. 7/16" B3148-1 (15) 21/2" 'H' B3148-11/2 11/2" (40) 215/16" (74.6) (50) 33/16" B3148-21/2 21/2" (65) 37/16" 2" B3148-2 6" 3/8"-16 x 11/2" 81/4" (81.0) 3/8"-16 x 13/4" 91/8" (231.8) 7/16" (87.3) 3/8"-16 x 13/4" 101/2" (266.7) 7/16" B3148-3 3" (80) 33/4" (95.2) 3/8"-16 x 13/4" 111/8" (282.6) 7/16" (11.1) 420 (1.87) 244 (110.7) B3148-4 4" (100) 41/4" (107.9) 1/2"-13 x 2" 121/2" (317.5) 9/16" (14.3) 610 (2.71) 358 (162.4) B3148-5 5" (125) 43/4" (120.6) 1/2"-13 x 21/4" 133/4" (349.2) 9/16" (14.3) 610 (2.71) 415 (188.2) 55/16" (134.9) 1/2"-13 x 21/4" 161/2" (419.1) 9/16" (14.3) 870 (3.87) 685 (310.7) (160.3) 1/2"-13 x 21/2" 185/8" (473.1) 9/16" (14.3) 870 (3.87) 815 (369.7) (196.8) 3/4"-10 x 3" 23" (584.2) 13/16" (20.6) 870 (3.87) 2142 (971.6) (222.2) 3/4"-10 x 3" 25" (635.0) 13/16" (20.6) 870 (3.87) 2337 (1060.0) B3148-6 6" (150) B3148-8 8" (200) 65/16" B3148-10 10" (250) 73/4" B3148-12 12" (300) 83/4" Material: Steel (Stainless steel available) Standard Finish: Plain or Electro-Plated Bolt Size 'B' 'A' 'C' Bolts and Nuts Included Ordering: Specify part number and finish. Figure B3149 Marine Hanger Part No. B3149-3/4 B3149-1 Nominal Pipe Size 3/4" 1" (20) (25) 'A' 12" 12" Note: Ductile and cast iron sizes are available. Bolt Size 'B' Wt./C 'C' 3/8"-16 x 11/2" 47/16" (112.7) 182 (82.5) (304.8) 3/8"-16 x 11/2" 411/16" (119.1) 230 (104.3) x 11/2" 5" (127.0) 239 (108.4) 51/4" (133.3) 244 (110.7) 11/4" (32) 12" (304.8) 3/8"-16 B3149-11/2 11/2" (40) 12" (304.8) 3/8"-16 x 11/2" 1/2"-13 x 13/4" B3149-21/2 B3149-3 2" (50) 12" (304.8) 21/2" (65) 12" (304.8) 1/2"-13 (304.8) 1/2"-13 3" (80) 12" kg (304.8) B3149-11/4 B3149-2 Lbs. 6" (152.4) 319 (144.7) x 2" 71/4" (184.1) 434 (196.8) x 2" 77/8" (200.0) 454 (205.9) x 2" 91/4" (234.9) 493 (223.6) x 2" 101/2" (266.7) 530 (240.4) x 21/2" 121/2" (317.5) 1142 (518.0) x 21/2" 145/8" (371.5) 1273 (577.4) B3149-4 4" (100) 12" (304.8) 1/2"-13 B3149-5 5" (125) 12" (304.8) 1/2"-13 B3149-6 6" (150) 12" (304.8) 5/8"-11 B3149-8 8" (200) 12" (304.8) 5/8"-11 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 69 Pipe Clamps Service: Designed for suspending or supporting pipe runs where exact distance from structure to pipe cannot be determined until installation. Field modify legs to suit conditions. Pipe Clamps Material: Steel (Stainless Steel available) Standard Finish: Plain or Electro-Plated Service: Designed for supporting pipe runs from strut supports. Design Load 1 Ordering: Specify part number and finish. Pipe Size Approvals: Underwriters' Laboratories Listed for B2400-3/4" thru B2400-8".Complies with Federal Specification WW-H-171E & A-A-1192A Type 26 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 26. Note: Ductile iron sizes available. Bolt Size ‘A’ Design Load 3 'C' 'T' 'B' 'W' Design Load 2 Figure B2400 Standard Pipe Strap Part No. Pipe Size ‘A’ ‘B’ ‘C’ ‘T’ ‘W’ B2400-1/2 1/2” (15) 5/16” (7.9) 7/16” (11.1) 213/16” (71.4) 10 Ga. (3.4) 15/8” (41.3) B2400-3/4 3/4” (20) 5/16” (7.9) 7/16” (11.1) 3” (76.2) 10 Ga. (3.4) 15/8” (41.3) 1” (25) 5/16” (7.9) 7/16” (11.1) 317/32” (89.7) 10 Ga. (3.4) 15/8” (41.3) B2400-11/4 11/4” (32) 5/16” (7.9) 7/16” (11.1) 33/4” (95.2) 10 Ga. (3.4) 15/8” (41.3) B2400-11/2 11/2” (40) 5/16” (7.9) 7/16” (11.1) 41/16” (103.2) 10 Ga. (3.4) 15/8” (41.3) 2” (50) 7/16” (11.1) 11/16” (17.4) 521/32” 21/2” (65) 7/16” (11.1) 11/16” (17.4) 65/32” 3” (80) 7/16” (11.1) 11/16” (17.4) 625/32” 31/2” (90) 7/16” (11.1) 11/16” (17.4) 79/32” (14.3) 11/16” (17.4) 725/32” B2400-1 B2400-2 B2400-21/2 Pipe Clamps B2400-3 B2400-31/2 (143.6) 1/4” (6.3) 15/8” (41.3) (156.3) 1/4” (6.3) 15/8” (41.3) (172.2) 1/4” (6.3) 15/8” (41.3) (184.9) 1/4” (6.3) 15/8” (41.3) (197.6) 1/4” (6.3) 15/8” (41.3) (225.4) 1/4” (6.3) 15/8” (41.3) (6.3) 15/8” (41.3) B2400-4 4” (100) 9/16” B2400-5 5” (125) 9/16” (14.3) 11/16” (17.4) 87/8” (14.3) 11/16” (17.4) 915/16” (252.4) 1/4” (17.4) 1131/32” (304.0) 1/4” (6.3) 15/8” (41.3) (6.3) 15/8” (41.3) B2400-6 6” (150) 9/16” B2400-8 8” (200) 9/16” (14.3) 11/16” 9/16” (14.3) 11/16” (17.4) 14” (355.6) 1/4” B2400-10 10” (250) B2400-12 12” (300) 9/16” (14.3) 11/16” (17.4) 16” (406.4) 1/4” (6.3) 15/8” (41.3) (23.8) 15/16” (33.3) 203/8” (517.5) 3/8” (9.5) 13/4” (44.4) B2400-14 14” (350) 15/16” B2400-16 16” (400) 15/16” (23.8) 15/16” (33.3) 223/8” (568.3) 3/8” (9.5) 13/4” (44.4) (23.8) 15/16” (33.3) 261/8” (663.6) 1/2” (12.7) 13/4” (44.4) (23.8) 15/16” (33.3) 281/8” (714.4) 1/2” (12.7) 13/4” (44.4) (23.8) 15/16” (33.3) 321/8” (816.0) 1/2” (12.7) 13/4” (44.4) B2400-18 18” (450) 15/16” B2400-20 20” (500) 15/16” (600) 15/16” B2400-24 24” All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 70 Pipe Clamps Design Load 1 Pipe Size Bolt Size ‘A’ Design Load 3 'C' 'T' 'B' 'W' Design Load 2 Figure B2400 Standard Pipe Strap Cont. Design Load 1 Design Load 2 Design Load 3 Wt./C Lbs. kN Lbs. kN Lbs. kN Lbs. B2400-1/2 kg 600 (2.67) 150 (.67) 105 (.47) 23 (10.4) B2400-3/4 600 (2.67) 150 (.67) 105 (.47) 26 (11.8) B2400-1 600 (2.67) 150 (.67) 120 (.53) 31 (14.0) B2400-11/4 600 (2.67) 150 (.67) 120 (.53) 36 (16.3) B2400-11/2 600 (2.67) 150 (.67) 120 (.53) 39 (17.7) B2400-2 1200 (5.34) 480 (2.14) 180 (.80) 93 (42.2) B2400-21/2 1200 (5.34) 480 (2.14) 180 (.80) 106 (48.1) B2400-3 1200 (5.34) 480 (2.14) 300 (1.33) 132 (59.9) B2400-31/2 1200 (5.34) 480 (2.14) 300 (1.33) 151 (68.5) B2400-4 1500 (6.67) 600 (2.67) 450 (2.00) 160 (72.6) B2400-5 1500 (6.67) 600 (2.67) 450 (2.00) 192 (87.1) B2400-6 1500 (6.67) 600 (2.67) 450 (2.00) 219 (99.3) B2400-8 2000 (8.90) 800 (3.56) 600 (2.67) 297 (134.7) B2400-10 2000 (8.90) 800 (3.56) 600 (2.67) 465 (210.9) B2400-12 2000 (8.90) 800 (3.56) 600 (2.67) 560 (254.0) B2400-14 2000 (8.90) 800 (3.56) 600 (2.67) 761 (345.2) B2400-16 2000 (8.90) 800 (3.56) 600 (2.67) 861 (390.5) B2400-18 2000 (8.90) 800 (3.56) 600 (2.67) 1297 (588.3) B2400-20 2000 (8.90) 800 (3.56) 600 (2.67) 1426 (646.8) B2400-24 2000 (8.90) 800 (3.56) 600 (2.67) 1682 (762.9) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 71 Pipe Clamps Part No. Pipe Rollers & Roller Supports Pipe rollers and roller supports offered in this section are designed to compensate for longitudinal movement due to the expansion or contraction of both insulated or non-insulated pipe. Materials Carbon Steel with Cast Iron rollers are used in the manufacture of pipe roller supports. Stainless Steel and other materials are available. Finishes Pipe Rollers & Pipe Supports The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Plated Zinc (ASTM B 633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A 123), Red Primer, Plastic Coating, Dura-Green® and other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, Copper plated, or in Stainless Steel. Approvals (as noted) Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society MSS SP-69 SP-58. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 72 Pipe Rollers & Roller Supports 'A' (Rod Size) Hanger Rod Not Included 'E' Material: Steel with Cast Iron Roller Standard Finish: Plain, Electro-Plated or Dura-Green® Service: Designed for suspending pipe where longitudinal movement and vertical adjustment is required. When used with insulated pipe, see B3160-B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 44 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 43. Note: If using D.I. pipe refer to page 237 for sizing. Non-metallic rollers with stainless steel yoke and hardware are available for most sizes (B3110NM-Pipe Size). Contact B-Line Engineering for more information. 'B' Center of axle to center of pipe. 'C' Center of axle to top of hanger steel. 'D' Rod Take-Out Center of pipe to bottom of hanger rod. 'D' 'C' 'B' 'E' Adjustment Top of pipe to bottom of hanger rod nut. 'F' Note: Not for continuous cycling applications. Figure B3110 Adjustable Steel Yoke Pipe Roll B3110-2 B3110-21/2 B3110-3 B3110-31/2 B3110-4 B3110-5 B3110-6 B3110-8 B3110-10 B3110-12 B3110-14 B3110-16 B3110-18 B3110-20 B3110-24 Nominal Pipe Size 2" 21/2" 3" 31/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" Part No. B3110-2 B3110-21/2 B3110-3 B3110-31/2 B3110-4 B3110-5 B3110-6 B3110-8 B3110-10 B3110-12 B3110-14 B3110-16 B3110-18 B3110-20 B3110-24 (50) 3/8"-16 (65) 1/2"-13 (80) 1/2"-13 (90) 1/2"-13 (100) 5/8"-11 (125) 5/8"-11 (150) 3/4"-10 (200) 3/4"-10 (250) 7/8"-9 (300) 7/8"-9 (350) 1"-8 1"-8 1"-8 11/4"-7 11/2"-6 (400) (450) (500) (600) 31/4" 37/8" 43/8" 47/8" 515/16" 7" 9" 111/8" 133/8" 141/2" 163/8" 183/8" 203/8" 245/8" 'B' 19/16" 17/8" 23/16" 21/2" 23/4" 33/8" 315/16" 51/16" 61/4" 73/8" 81/4" 91/4" 103/8" 111/2" 1313/16" 'C' (39.7) (47.6) (55.6) (63.5) (69.8) (85.7) (100.0) (128.6) (158.7) (187.3) (209.5) (234.9) (263.5) (292.1) (350.8) Maximum O.D. Covering 'F' 27/8" Rod Size 'A' (73.0) (66.7) (82.5) 3" 35/8" 41/8" 411/16" 53/4" 63/4" 83/4" 103/4" 13" 141/4" 161/8" 181/8" 201/8" 243/8" (76.2) (98.4) (123.8) (150.8) (177.8) (228.6) (282.6) (339.7) (368.3) (415.9) (466.7) (517.5) (625.5) 'D' (120.6) (152.4) (168.3) (184.1) (200.0) (233.4) (263.5) (320.7) (379.4) (441.3) (482.6) (527.0) (601.7) (657.2) (801.7) Design Load Lbs. 25/8" (111.1) 43/4" 6" 65/8" 71/4" 77/8" 93/16" 103/8" 125/8" 1415/16" 173/8" 19" 203/4" 2311/16" 257/8" 319/16" (92.1) (104.8) (119.1) (146.0) (171.4) (222.2) (273.0) (330.2) (361.9) (409.6) (460.4) (511.2) (619.1) 150 225 310 390 475 685 780 780 965 1200 1200 1200 1400 1600 1800 23/8" 33/16" 31/2" 33/4" 4" 49/16" 51/16" 61/16" 73/16" 83/8" 83/4" 93/4" 117/16" 121/4" 15" 'E' (60.3) (81.0) (88.9) (95.2) (101.6) (115.9) (128.6) (154.0) (182.6) (212.7) (222.2) (247.6) (290.5) (311.1) (381.0) Lbs. kg (.67) 123 178 206 267 344 600 800 1300 1600 2600 3400 3900 4900 6686 11630 (55.8) (1.38) (1.73) (2.11) (3.04) (3.47) (3.47) (4.29) (5.34) (5.34) (5.34) (6.23) (7.11) (8.00) (36.5) (50.8) (50.8) (50.8) (50.8) (50.8) (50.8) (50.8) (52.4) (57.1) (57.1) (50.8) (68.3) (63.5) (88.9) Wt./C kN (1.00) 17/16" 2" 2" 2" 2" 2" 2" 2" 21/16" 21/4" 21/4" 2" 11 2 /16" 21/2" 31/2" (80.7) (93.4) (121.1) (156.0) (272.1) (362.9) (589.7) (725.7) (1179.3) (1542.2) (1769.0) (2222.6) (3032.7) (5275.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 73 Pipe Rollers & Pipe Supports Part No. Pipe Rollers & Roller Supports 'D' Center of pipe to center of axle. Material: Steel Axle with Cast Iron Roller/Malleable Sockets Standard Finish: Plain or Electro-Plated Service: Designed for suspending piping where longitudinal movement and vertical adjustment is required. When used with insulated pipe, see B3160-B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. Ordering: Specify part number and finish Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 42 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 41. 'E' Center of axle to bottom of socket. 'B' 'A' (Rod Size) Hanger Rod and Nuts Not Included 'D' 'C' 'E' Figure B3114 Pipe Roll with Sockets Part No. B3114-2 B3114-21/2 B3114-3 B3114-31/2 B3114-4 Nominal Pipe Size Rod Size 'A' 'B' 2" (50) 3/8"-16 25/8" 21/2" (65) 1/2"-13 31/8" 33/4" 'C' (66.7) 41/8" (79.4) 47/8" 'D' (104.8) 19/16" (39.7) (123.8) 17/8" (47.6) (55.6) (80) 1/2"-13 (95.2) 51/2" (139.7) 23/16" 31/2" (90) 1/2"-13 41/4" (107.9) 61/8" (155.6) 21/2" (63.5) 4" (100) 5/8"-11 43/4" (120.6) 63/4" (171.4) 23/4" (69.8) 513/16" (85.7) 3" B3114-5 5" (125) 5/8"-11 (147.6) 81/16" (204.8) 33/8" B3114-6 6" (150) 3/4"-10 67/8" (174.6) 99/16" (242.9) 315/16" (100.0) B3114-8 8" (200) 7/8"-9 87/8" (225.4) 1115/16" (303.2) 51/16" (128.6) (357.2) 61/4" (158.7) (401.6) 73/8" (187.3) (209.5) B3114-10 10" (250) 7/8"-9 11" (279.4) 141/16" B3114-12 12" (300) 7/8"-9 13" (330.2) 1513/16" B3114-14 14" (350) 1"-8 141/4" (361.9) 173/4" (450.8) 81/4" B3114-16 16" (400) 1"-8 161/4" (412.7) 193/4" (501.6) 91/4" (234.9) B3114-18 18" (450) 1"-8 181/4" (463.5) 217/8" (555.6) 103/8" (263.5) 201/4" (514.3) 241/4" (615.9) 111/2" (292.1) (615.9) 287/8" (733.4) 1313/16" (350.8) (768.3) 351/2" (901.7) 171/4" (438.1) B3114-20 20" (500) 11/4"-7 B3114-24 24" (600) 11/2"-6 241/4" (750) 11/2"-6 301/4" B3114-30 30" Part No. Maximum O.D. Covering 'E' Design Load Notes: If using D.I. pipe refer to page 237 for sizing. Non-metallic rollers with hot-dip galvanized sockets and stainless steel hardware are available for most sizes (B3114NM-Pipe Size). Contact B-Line Engineering for more information. Note: Not for continuous cycling applications. Wt./C Lbs. kN Lbs. kg Pipe Rollers & Pipe Supports B3114-2 3/4" (19.0) 33/4" (82.5) 600 (2.67) 119 (54.0) B3114-21/2 3/4" (19.0) 33/4" (95.2) 660 (2.93) 140 (63.5) B3114-3 3/4" (19.0) 41/2" (114.3) 700 (3.11) 158 (71.6) B3114-31/2 3/4" (19.0) 5" (127.0) 750 (3.33) 170 (77.1) B3114-4 3/4" (19.0) 57/8" (149.2) 750 (3.33) 188 (85.3) B3114-5 3/4" (19.0) 7" (177.8) 750 (3.33) 246 (111.6) B3114-6 11/8" (28.6) 81/4" (209.5) 1070 (4.76) 504 (228.6) B3114-8 11/8" (28.6) 101/2" (266.7) 1350 (6.00) 658 (298.4) B3114-10 11/8" (28.6) 123/4" (323.8) 1730 (7.69) 849 (385.1) B3114-12 11/8" (28.6) 143/4" (374.6) 2400 (10.67) 1200 (544.3) B3114-14 11/2" (38.1) 161/4" (412.7) 3130 (13.92) 2289 (1038.3) B3114-16 11/2" (38.1) 18" (457.2) 3970 (17.66) 2497 (1132.6) B3114-18 11/2" (38.1) 201/4" (514.3) 4200 (18.68) 2899 (1315.0) B3114-20 11/2" (38.1) 221/2" (571.5) 4550 (20.24) 3637 (1649.7) B3114-24 2" (50.8) 261/2" (673.1) 6160 (27.40) 5664 (2569.2) B3114-30 2" (50.8) 321/2" (825.5) 7290 (32.42) 9437 (4280.6) 36" (900) available upon request. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 74 Pipe Rollers & Roller Supports 'D' Length of Roller 'E' Center of axle to center of pipe. 'D' 'F' Center of axle to bottom of socket. 'B' 'E' 'A' (Rod Size) 'F' 'C' Material: Steel Rods and Axle with Cast Iron Roller/Malleable Sockets Standard Finish: Plain or Electro-Plated Service: Designed for supporting pipe where longitudinal movement and vertical adjustment are required. When used with insulated pipe, see B3160-B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 42 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 41. Notes: If using D.I. pipe refer to page 237 for sizing. Non-metallic rollers with hot-dip galvanized sockets and stainless steel hardware are available for most sizes (B3122NM-Pipe Size). Contact B-Line Engineering for more information. Figure B3122 Adjustable Roller Support B3122-2 B3122-21/2 B3122-3 B3122-31/2 B3122-4 B3122-5 B3122-6 B3122-8 B3122-10 B3122-12 B3122-14 B3122-16 B3122-18 B3122-20 B3122-24 Nominal Pipe Size Rod Size 'A' (50) 3/8"-16 21/2" (65) 1/2"-13 3" 1 3 /2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" (80) 1/2"-13 2" (90) 1/2"-13 (100) 5/8"-11 (125) 5/8"-11 (150) 3/4"-10 (200) 7/8"-9 (250) 7/8"-9 (300) 7/8"-9 (350) 1"-8 1"-8 1"-8 11/4"-7 11/2"-6 (400) (450) (500) (600) 'B' 12" 12" 12" 12" 12" 12" 12" 12" 12" 12" 12" 18" 18" 18" 24" (304.8) (304.8) (304.8) (304.8) (304.8) (304.8) (304.8) (304.8) (304.8) (304.8) (304.8) (457.2) (457.2) (457.2) (609.6) 'C' 41/8" 47/8" 51/2" 61/8" 63/4" 81/16" 99/16" 1115/16" 141/16" 1513/16" 173/4" 193/4" 217/8" 241/4" 287/8" 'D' (104.8) (123.8) (139.7) (155.6) (171.4) (204.8) (242.9) (303.2) (357.2) (401.6) (450.8) (501.6) (555.6) (615.9) (733.4) 25/8" 31/8" 33/4" 41/4" 43/4" 513/16" 67/8" 87/8" 11" 13" 141/4" 161/4" 181/4" 201/4" 241/4" Design Load Part No. 'E' B3122-2 19/16" B3122-21/2 17/8" B3122-3 23/16" B3122-31/2 21/2" B3122-4 23/4" 'F' (66.7) (79.4) (95.2) (107.9) (120.6) (147.6) (174.6) (225.4) (279.4) (330.2) (361.9) (412.7) (463.5) (514.3) (615.9) Wt./C Lbs. kN Lbs. kg (39.7) 3/4" (19.0) 600 (2.67) 194 (88.0) (47.6) 3/4" (19.0) 660 (2.93) 284 (128.8) (55.6) 3/4" (19.0) 700 (3.11) 302 (137.0) (63.5) 3/4" (19.0) 750 (3.33) 314 (142.4) (69.8) 3/4" (19.0) 750 (3.33) 438 (198.7) B3122-5 33/8" (85.7) 3/4" (19.0) 750 (3.33) 495 (224.5) B3122-6 B3122-8 B3122-10 B3122-12 B3122-14 B3122-16 B3122-18 B3122-20 B3122-24 315/16" 51/16" 61/4" 73/8" 81/4" 97/16" 101/2" 111/2" 1313/16" (100.0) 11/8" 11/8" 11/8" 11/8" 11/2" 11/2" 11/2" 11/2" 2" (28.6) 1070 1350 1730 2400 3130 3970 4200 4550 6160 (4.76) 867 1176 1368 1861 3116 3550 4328 5241 7773 (393.3) (128.6) (158.7) (187.3) (209.5) (239.7) (266.7) (292.1) (350.8) (28.6) (28.6) (28.6) (38.1) (38.1) (38.1) (38.1) (50.8) (6.00) (7.69) (10.67) (13.92) (17.66) (18.68) (20.24) (27.40) Note: Not for continuous cycling applications. (533.4) (620.5) (844.1) (1413.4) (1610.3) (1963.2) (2377.3) (3525.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 75 Pipe Rollers & Pipe Supports Part No. Pipe Rollers & Roller Supports 'D' 'B' 'D' Length of Roller 'E' Center of axle to center of pipe. 'F' Center of axle to bottom of socket. 'E' 'A' (Rod Size) 'F' 'C' Material: Steel Rods and Axle with Cast Iron Rollers/Malleable Sockets Standard Finish: Plain or Electro-Plated Service: Designed for supporting and guiding pipe where longitudinal movement and vertical adjustment are required. When used with insulated pipe, see B3160-B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 42 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 41. Notes: If using D.I. pipe refer to page 237 for sizing. Non-metallic rollers with hot-dip galvanized sockets and stainless steel hardware are available for most sizes (B3122ANM-Pipe Size). Contact B-Line Engineering for more information. Figure B3122A Adjustable Double Roller Guide Part No. B3122A-2 B3122A-21/2 B3122A-3 B3122A-31/2 B3122A-4 B3122A-5 B3122A-6 B3122A-8 B3122A-10 B3122A-12 B3122A-14 B3122A-16 B3122A-18 B3122A-20 B3122A-24 Nominal Pipe Size 2" 21/2" 3" 31/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" Rod Size 'A' (50) 3/8"-16 (65) 1/2"-13 (80) 1/2"-13 (90) 1/2"-13 (100) 5/8"-11 (125) 5/8"-11 (150) 3/4"-10 (200) 7/8"-9 (250) 7/8"-9 (300) 7/8"-9 (350) 1"-8 1"-8 1"-8 1 1 /4"-7 11/2"-6 (400) (450) (500) (600) 'B' 12" 14" 14" 14" 18" 18" 24" 24" 30" 30" 36" 36" 42" 42" 48" (304.8) (355.6) (355.6) (355.6) (457.2) (457.2) (609.6) (609.6) (762.0) (762.0) (914.4) (914.4) (1066.8) (1066.8) (1219.2) 'C' 41/8" 47/8" 51/2" 61/8" 63/4" 81/16" 99/16" 1115/16" 141/16" 1513/16" 173/4" 193/4" 217/8" 241/4" 287/8" 'D' (104.8) (123.8) (139.7) (155.6) (171.4) (204.8) (242.9) (303.2) (357.2) (401.6) (450.8) (501.6) (555.6) (615.9) (733.4) 25/8" 31/8" 33/4" 41/4" 43/4" 513/16" 67/8" 87/8" 11" 13" 141/4" 161/4" 181/4" 201/4" 241/4" Design Load Part No. Pipe Rollers & Pipe Supports B3122A-2 B3122A-21/2 B3122A-3 B3122A-31/2 B3122A-4 B3122A-5 B3122A-6 B3122A-8 B3122A-10 B3122A-12 B3122A-14 B3122A-16 B3122A-18 B3122A-20 B3122A-24 'E' 19/16" 17/8" 23/16" 21/2" 23/4" 33/8" 315/16" 51/16" 61/4" 73/8" 81/4" 97/16" 101/2" 111/2" 1313/16" 'F' (39.7) 3/4" (19.0) (47.6) 3/4" (19.0) (55.6) 3/4" (19.0) (63.5) 3/4" (19.0) (69.8) 3/4" (19.0) (85.7) 3/4" (19.0) (100.0) 11/8" (28.6) (128.6) 11/8" 11/8" 11/8" 11/2" 11/2" 11/2" 11/2" 2" (28.6) (158.7) (187.3) (209.5) (242.9) (266.7) (292.1) (350.8) (28.6) (28.6) (38.1) (38.1) (38.1) (38.1) (50.8) (66.7) (79.4) (95.2) (107.9) (120.6) (147.6) (174.6) (225.4) (279.4) (330.2) (361.9) (412.7) (463.5) (514.3) (615.9) Wt./C Lbs. kN Lbs. kg 600 660 700 750 750 750 1070 1350 1730 2400 3130 3970 4200 4550 6160 (2.67) 323 465 501 525 757 872 1687 2277 2830 3817 6513 6759 7518 11222 17666 (146.5) (2.93) (3.11) (3.33) (3.33) (3.33) (4.76) (6.00) (7.69) (10.67) (13.92) (17.66) (18.68) (20.24) (27.40) Note: Not for continuous cycling applications. (210.9) (227.2) (238.1) (343.4) (395.5) (765.2) (1032.8) (1283.7) (1731.4) (2954.3) (3065.9) (3410.1) (5090.3) (8013.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 76 Pipe Rollers & Roller Supports 'B' Overall Bolt Length 'C' Center of axle to bottom of steel strap. 'E' Center of axle to center of pipe. 'B' Material: Steel with Cast Iron Roller Standard Finish: Plain or Electro-Plated Service: Designed for supporting pipe with longitudinal movement. When used with insulated pipe, see B3160-B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. 'E' Ordering: Specify part number and finish. (Order mounting bolts separately). 'C' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 45 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 44. Steel Size Notes: If using D.I. pipe refer to page 237 for sizing. Non-metallic rollers with stainless steel chair and hardware are available for most sizes (B3120NM-Pipe Size). Contact B-Line Engineering for more information. 'A' 'D' Bolt Size (Not Included) Figure B3120 Roller Chair B3120-2 B3120-21/2 B3120-3 B3120-31/2 B3120-4 B3120-5 B3120-6 B3120-8 B3120-10 B3120-12 B3120-14 B3120-16 B3120-18 B3120-20 B3120-24 Nominal Pipe Size 2" 21/2" 3" 31/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" Part No. B3120-2 B3120-21/2 B3120-3 B3120-31/2 B3120-4 B3120-5 B3120-6 B3120-8 B3120-10 B3120-12 B3120-14 B3120-16 B3120-18 B3120-20 B3120-24 'A' (50) 11/4" (65) 11/4" 2" 2" 2" 3" 31/8" 33/8" 51/4" 51/2" 6" 8" 9" 10" 12" (80) (90) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) 'E' 19/16" 17/8" 23/16" 21/2" 23/4" 33/8" 315/16" 51/16" 61/4" 73/8" 81/4" 91/4" 103/8" 111/2" 133/4" 'B' (31.7) 45/8" (31.7) 53/8" 6" 63/4" 71/4" 87/16" 93/4" 12" 147/16" 165/8" 181/4" 21" 23" 25" 30" (50.8) (50.8) (50.8) (76.2) (79.4) (85.7) (133.3) (139.7) (152.4) (203.2) (228.6) (254.0) (304.8) 'C' (117.5) 11/2" (38.1) (136.5) 15/8" 13/4" 21/16" 25/16" 21/2" 23/4" 3" 5 3 /8" 41/8" 45/8" 5" 51/4" 53/4" 7" (41.3) (152.4) (171.4) (184.1) (214.3) (247.6) (304.8) (366.7) (422.3) (463.5) (533.4) (584.2) (635.0) (762.0) Steel Size (39.7) 1/4" (6.3 x 31.7) (47.6) 1/4" (6.3 x 31.7) (55.6) (63.5) (69.8) (85.7) (100.0) (128.6) (158.7) (187.3) (209.5) (234.9) (263.5) (292.1) (349.2) x 11/4" x 11/4" 1/4" x 11/4" 3/8" x 11/2" 3/8" x 11/2" 3/8" x 11/2" 3/8" x 2" 3/8" x 2" 1/2" x 2" 1/2" x 2" 1/2" x 21/2" 5/8" x 21/2" 5/8" x 21/2" 5/8" x 3" 3/4" x 3" (6.3 x 31.7) (9.5 x 38.1) (9.5 x 38.1) (9.5 x 38.1) (9.5 x 50.8) (9.5 x 50.8) (12.7 x 50.8) (12.7 x 50.8) (12.7 x 63.5) (15.9 x 63.5) (15.9 x 63.5) (15.9 x 76.2) (19.0 x 76.2) (44.4) (52.4) (58.7) (63.5) (69.8) (76.2) (92.1) (104.8) (117.5) (127.0) (133.3) (146.0) (177.8) 3/8"-16 x 11/2" 3/8"-16 x 11/2" 3/8"-16 x 11/2" 3/8"-16 x 11/2" 1/2"-13 x 11/2" 1/2"-13 x 11/2" 1/2"-13 x 11/2" 5/8"-11 x 11/2" 5/8"-11 x 2" 5/8"-11 x 2" 5/8"-11 x 2" 5/8"-11 x 21/2" 5/8"-11 x 21/2" 3/4"-10 x 3" 3/4"-10 x 3" Design Load Lbs. kN Wt./C Lbs. kg 300 600 600 600 700 700 1000 1300 1700 2300 3100 3900 4200 4500 6000 119 146 172 264 303 401 620 874 1270 1918 2629 3248 4120 5630 7702 (1.33) (2.67) (2.67) (2.67) (3.11) (3.11) (4.45) (5.78) (7.56) (10.33) (13.79) (17.35) (18.68) (20.01) (26.69) Note: Not for continuous cycling applications. (54.0) (66.2) (78.0) (119.7) (137.4) (181.9) (281.2) (396.4) (576.1) (870.0) (1192.5) (1473.3) (1868.8) (3553.7) (3493.6) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 77 Pipe Rollers & Pipe Supports Part No. Recommended Bolt Size (Not Included) 'D' Pipe Rollers & Roller Supports Material: Steel with Cast Iron Roller Standard Finish: Plain or Electro-Plated 'C' Service: Designed for supporting pipe where longitudinal movement and vertical adjustment are required. When used with insulated pipe, see B3160B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. 'E' 'B' Ordering: Specify part number and finish. 'B' Overall Bolt Length Notes: If using D.I. pipe refer to page 237 for sizing. Non-metallic rollers with stainless steel chair and hardware are available for most sizes (B3124NM-Pipe Size). Contact B-Line Engineering for more information. 'C' Center of axle to center of pipe. Steel Size 'A' (Thread Size) 'D' Overall Stud Height 'D' 'E' Center of roller to bottom of chair. 'F' Length of Roller Figure B3124 Roller Support Part No. B3124-2 to 31/2 B3124-4 to 6 B3124-8 to 10 B3124-12 to 14 Nominal Pipe Size 'B' 'C' 'D' 2" (50) 5/8"-11 43/4" (120.6) 13/4" (44.4) 5" (127.0) 21/2" (65) 5/8"-11 43/4" (120.6) 21/8" (54.0) 5" (127.0) 43/4" 3" (80) 5/8"-11 (120.6) 23/8" (60.3) 5" (127.0) 31/2" (90) 5/8"-11 43/4" (120.6) 25/8" (66.7) 5" (127.0) 4" (100) 3/4"-10 57/8" (149.2) 23/4" (69.8) 6" (152.4) 5" (125) 3/4"-10 57/8" (149.2) 33/8" (85.7) 6" (152.4) 6" (150) 3/4"-10 57/8" (149.2) 4" (101.6) 6" (152.4) 8" (200) 7/8"-9 83/4" (222.2) 51/4" (133.3) 6" (152.4) 10" (250) 7/8"-9 83/4" (222.2) 63/8" (161.9) 6" (152.4) 12" (300) 1"-8 111/4" (285.7) 71/2" (190.5) 7" (177.8) (350) 1"-8 111/4" (285.7) 81/8" (206.4) 7" (177.8) (400) 11/8"-7 121/2" (317.5) 93/8" (238.1) 8" (203.2) 18" (450) 11/8"-7 121/2" (317.5) 103/8" (263.5) 8" (203.2) 20" (500) 11/8"-7 121/2" (317.5) 113/8" (288.9) 8" (203.2) 14" 16" B3124-16 to 20 Thread Size 'A' Note: Not for continuous cycling applications. Pipe Rollers & Pipe Supports Design Load Part No. 'E' Length of Roller B3124-2 to 31/2 B3124-4 to 6 113/16" 2" B3124-8 to 10 211/16" B3124-12 to 14 31/4" (82.5) B3124-16 to 20 31/2" (88.9) (46.0) (50.8) (68.3) 23/4" 33/4" (69.8) Steel Size 3/16" x 11/2" x 2" Wt./C kN Lbs. kg (1.73) (2.67) 233 368 (105.7) (6.3 x 50.8) 390 600 (3.56) 919 (416.8) (4.8 x 38.1) Lbs. (95.2) 1/4" (152.4) 3/8" x 2" (9.5 x 50.8) 800 8" (203.2) 1/2" x 2" (12.7 x 50.8) 1300 (5.78) 1660 (753.0) 9" (228.6) 1/2" x 2" (12.7 x 50.8) 2300 (10.23) 2250 (1020.6) 6" (166.9) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 78 Pipe Rollers & Roller Supports Material: Steel with Cast Iron Roller Standard Finish: Plain or Electro-Plated Service: Designed to mount on strut (metal framing) for the support of pipe with longitudinal movement. When used with insulated pipe, see B3160-B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. Steel Size 'E' Dia 'A' Center of axle to bottom of plate. 'C' Center of pipe to bottom of support bracket. 'B' 'D' 'A' Notes: If using D.I. pipe refer to page 237 for sizing. Non-metallic rollers with stainless steel brackets and hardware are available (B3126NM-Pipe Size). Contact B-Line Engineering for more information. Note: Not for continuous cycling applications. Figure B3126 Roller Support Part No. Nominal Pipe Size 2" B3126-2 to 31/2 B3126-4 to 6 B3126-8 to 10 B3126-12 to 14 21/2" (50) 17/16" (65) 17/16" 'B' (36.5) (36.5) 6" 6" 'C' (152.4) 311/64" (152.4) 327/64" 'D' (80.6) 75/8" (193.7) (86.9) 75/8" (193.7) (193.7) 3" (80) 17/16" (36.5) 6" (152.4) 347/64" (94.8) 75/8" 31/2" (90) 17/16" (36.5) 6" (152.4) 363/64" (101.2) 75/8" (193.7) 4" (100) 17/16" (36.5) 7" (177.8) 413/64" (106.8) 85/8" (219.1) 5" (125) 17/16" (36.5) 7" (177.8) 447/64" (120.2) 85/8" (219.1) 6" (150) 17/16" (36.5) 7" (177.8) 517/64" (133.8) 85/8" (219.1) 8" (200) 113/16" (46.0) 83/4" (222.3) 7" (177.8) 103/8" (263.5) 10" (250) 113/16" (46.0) 83/4" (222.3) 81/16" (204.8) 103/8" (263.5) 12" (300) 27/16" (61.9) 121/8" (308.0) 927/32" (250.1) 143/8" (365.1) (350) 27/16" (61.9) 121/8" (308.0) 1015/32" (265.9) 143/8" (365.1) (400) 25/8" (66.7) 131/8" (333.4) 117/8" (301.6) 153/8" (390.5) (450) 25/8" (66.7) 131/8" (333.4) 127/8" (327.1) 153/8" (390.5) (500) 25/8" (66.7) 131/8" (333.4) 137/8" (352.4) 153/8" (390.5) 14" 16" B3126-16 to 20 'A' 18" 20" Design Load Part No. 'E' B3126-2 to 31/2 9/16" B3126-4 to 6 9/16" B3126-8 to 10 9/16" B3126-12 to 14 13/16" B3126-16 to 20 13/16" Steel Size Lbs. Wt./C kN Lbs. kg (14.3) 1/4" x 15/8" (6.3 x 41.3) 390 (1.73) 177 (80.3) (14.3) 1/4" x 15/8" (6.3 x 41.3) 600 (2.67) 231 (104.8) (14.3) 1/4" x 15/8" (6.3 x 41.3) 800 (3.56) 542 (245.8) (20.6) 3/8" x 2" (9.5 x 50.8) 1300 (5.78) 1040 (471.7) (20.6) 3/8" x 2" (9.5 x 50.8) 2300 (10.23) 1508 (684.0) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 79 Pipe Rollers & Pipe Supports 'C' Ordering: Specify part number and finish. Pipe Rollers & Roller Supports Channel and mounting hardware not included. Material: Steel with Malleable Iron Rollers Standard Finish: Electro-Plated Service: Designed to mount on strut (metal framing) for the support of pipe with longitudinal movement. When used with insulated pipe, see B3160-B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. Ordering: Specify part number and finish. B Design Load: 500 Lbs. (2.22kN) 25/8” (66.7) Note: If using D.I. pipe refer to page 237 for sizing. A 23/8” (60.3) Figure B218 Pipe Rollers-1/2" (15) to 8" (200) Pipe Note: Not for continuous cycling applications. Reference Chart - A Dimension Insulation Thickness Pipe Size 1/2" 0” (0.0) (15) 71/4" (184.1) 3/4" (20) 71/4" 1" (25) 11/4" 11/2” (38.1) 1” (25.4) -- -- -- -- (184.1) 71/4" (184.1) 75/8" 71/4" (184.1) 71/4" (184.1) 75/8" (184.1) 8" 21/2” (63.5) 2” (50.8) 3” (76.2) 4” (101.6) -- -- -- -- -- -- -- -- (193.7) 8" (203.2) -- -- -- -- -- -- (193.7) 81/4" (209.5) -- -- -- -- -- -- (203.2) 81/4" (209.5) -- -- -- -- -- -- (32) 71/4" (184.1) 71/4" 11/2" (40) 71/4" (184.1) 75/8" (193.7) 8" (203.2) 81/2" (215.9) 9" (228.6) -- -- -- -- 2" (50) 71/4" (184.1) 75/8" (193.7) 81/2" (215.9) 81/2" (215.9) 9" (228.6) -- -- -- -- 21/2" (65) 71/4" 8" (203.2) 81/2" (215.9) 9" (228.6) 10" (254.0) -- -- -- -- 3" (80) 71/4" (184.1) 81/2" (215.9) 9" (228.6) 9" (228.6) 10" (254.0) 10" (254.0) -- -- 31/2" (90) 71/4" (184.1) 81/2" (215.9) 9" (228.6) 10" (254.0) 10" (254.0) 10" (254.0) -- -- 4" (100) 75/8" (193.7) 9" (228.6) 9" (228.6) 10" (254.0) 10" (254.0) 10" (254.0) -- -- 5" (125) 81/2" (215.9) 9" (228.6) 10" (254.0) 10" (254.0) 11" (279.4) 11" (279.4) 12" (304.8) 6" (150) 9" (228.6) 10" (254.0) 10" (254.0) 11" (279.4) 11" (279.4) 11" (279.4) 12" (304.8) 8" (200) 10" (254.0) 11" (279.4) 11" (279.4) 11" (279.4) 12" (304.8) -- -- -- -- (184.1) Reference Chart - B Dimension Insulation Thickness Pipe Size 1/2" 0” (0.0) (15) 211/16" 3/4" (20) 213/16" 1" (25) 215/16" (74.6) Pipe Rollers & Pipe Supports 11/4" 11/2" 2" 1” (25.4) (68.3) -- (71.4) 37/8" (32) 31/8" (40) 31/4" (50) 39/16" (90.5) 21/2" (65) 313/16" 3" (80) 41/8" (104.8) 31/2" (90) 43/8" 4" -- -- (98.4) 43/8" 43/16" (106.4) (79.4) 43/16" (82.5) 43/8" 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2) 4” (101.6) -- -- -- -- -- -- -- -- -- (111.1) 47/8" (123.8) -- -- -- -- -- -- 51/16" (128.6) -- -- -- -- -- -- 411/16" (119.1) (106.4) 45/8" (117.5) 51/8" -- -- -- -- -- -- (111.1) 47/8" (123.8) 55/16" (134.9) 53/4" (146.0) -- -- -- -- 411/16" (119.1) 51/16" (128.6) 55/8" (142.9) 61/16" (154.0) -- -- -- -- (161.9) -- -- -- -- (163.5) 7" (177.8) -- -- (123.8) 55/16" (134.9) 6" (152.4) 63/8" 51/16" (128.6) 59/16" (141.3) 61/8" (155.6) 67/16" (111.1) 55/16" (134.9) 513/16" (147.6) 61/4" (158.7) 611/16" (169.9) 71/4" (184.1) -- -- (100) 45/8" (117.5) 59/16" (141.3) 61/16" 67/16" (163.5) 615/16" (176.2) 73/8" (187.3) -- -- (125) 51/2" (127.0) 61/16" (154.0) 67/16" 6" (150) 51/2" (139.7) 67/16" (163.5) 615/16" 8" (200) 615/16" (160.3) 73/8" (187.3) 715/16" (201.6) 5" (96.8) 47/8" (130.2) (154.0) (163.5) 7" (176.2) 73/8" (177.8) 73/8" (187.3) 715/16" 87/16" (214.3) (187.3) 77/8" (200.0) (201.6) 81/2" (215.9) 91/2" (241.3) -- -- -- -- 815/16" (227.0) 813/16" (223.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 80 Pipe Rollers & Roller Supports Material: Steel with Malleable Iron Rollers Standard Finish: Electro-Plated Service: Designed to mount on strut (metal framing) for the support of pipe with longitudinal movement. When used with insulated pipe, see B3160-B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. Ordering: Specify part number and finish. Design Load: 750 Lbs. (3.33kN) Note: If using D.I. pipe refer to page 237 for sizing. Channel and mounting hardware not included. Note: Not for continuous cycling applications. Figure B219 Pipe Rollers 3/4" (15) to 12" (300) Pipe B 25/8” (66.7) B219 Sizing Chart A Insulation Thickness 23/8” Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) 1/2" (15) B219 -- -- -- -- -- -- 3/4" (20) 1" (25) B219 B219 B219 B219 B219 B219-1 B219-1 B219-1 --- --- --- 11/4" (32) B219 B219 B219-1 B219-1 -- -- -- 11/2" 2" (40) B219 B219 B219 B219-1 B219-1 B219-1 B219-2 B219-2 B219-2 B219-2 --- --- 21/2" 3" (65) B219 B219 B219-1 B219-1 B219-2 B219-2 B219-2 B219-2 B219-3 B219-3 -B219-3 --- B219-1 B219-2 B219-2 B219-1 B219-2 B219-2 B219-3 B219-3 B219-4 B219-4 B219-5 B219-5 -- B219-2 B219-2 B219-3 B219-3 B219-4 --- B219-3 B219-3 B219-3 B219-4 B219-5 --- B219-3 B219-3 B219-4 B219-4 B219-5 --- B219-4 B219-4 B219-4 B219-5 ---- --B219-5 B219-5 ---- (60.3) Reference Chart A Dimension A Wt./C Part No. B219 Lbs. 71/4" (184.1) 253 kg 31/2" 4" 5" 6" 8" 10" 12" (114.7) B219-1 8" (203.2) 258 (117.0) B219-2 9" (228.6) 263 (119.3) B219-3 10" (254.0) 269 (122.0) B219-4 107/8" (276.2) 274 (124.8) B219-5 115/8" (295.3) 279 (126.5) (50) (80) (90) (100) B219-1 (125) (150) (200) (250) (300) 2” (50.8) 21/2” (63.5) 3” (76.2) 4” (101.6) Reference Chart - B Dimension Insulation Thickness 1/2" (15) 3/4" (20) 1" 1 1 /4" 11/2" 2" 1 2 /2" 3" 31/2" 4" 5" 6" 8" 10" 12" (25) 0” (0.0) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) 211/16" 213/16" 215/16" 31/8" 31/4" 39/16" 33/4" 41/8" 41/8" 49/16" 51/16" 57/16" 63/8" 75/16" 81/4" (68.3) (71.4) (74.6) (79.4) (82.5) (90.5) (95.2) (104.8) (107.9) (115.9) (128.6) (138.1) (161.9) (185.7) (209.5) 1” (25.4) -7 3 /8" 43/16" 43/16" 47/16" 45/8" 47/8" 51/8" 51/4" 51/2" 61/16" 67/16" 77/16" 83/16" -- -(98.4) (106.4) (106.4) (112.7) (117.5) (123.8) (130.2) (133.3) (139.7) (154.0) (163.5) (188.9) (208.0) -- -1 4 /2" 45/8" 45/8" 47/8" 53/16" 51/4" 59/16" 513/16" 61/16" 67/16" 615/16" 715/16" --- 2” (50.8) -(114.3) (117.5) (117.5) (123.8) (131.8) (133.3) (141.3) (147.6) (154.0) (163.5) (176.2) (201.6) --- -7 4 /8" 51/16" 51/8" 51/4" 51/2" 6" 61/16" 61/4" 67/16" 7" 73/8" 83/8" --- -(123.8) (128.6) (130.2) (133.3) (139.7) (152.4) (154.0) (158.7) (163.5) (177.8) (187.3) (212.7) --- 21/2” (63.5) ----53/8" 61/16" 63/8" 67/16" 611/16" 615/16" 73/8" 77/8" 9" --- ----(146.0) (154.0) (161.9) (163.5) (169.9) (176.2) (187.3) (200.0) (228.6) --- 3” (76.2) -------615/16" 71/16" 73/8" 77/8" 815/16" ---- -------(176.2) (179.4) (187.3) (200.0) (211.1) ---- 4” (101.6) --------------------815/16" (211.1) 99/16" (242.9) ------- All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 81 Pipe Rollers & Pipe Supports Pipe Size 11/2” (38.1) Pipe Rollers & Roller Supports Material: Steel with Malleable Iron Rollers Standard Finish: Electro-Plated Service: Designed to mount on strut (metal framing) for the support of pipe with longitudinal movement. When used with insulated pipe, see B3160-B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. Channel and mounting hardware not included. Ordering: Specify part number and finish. Design Load: 1500 Lbs. (6.67kN) Note: If using D.I. pipe refer to page 237 for sizing. B 4” (101.6) A Figure B379 Pipe Roller - 6" (150) to 18" (450) Pipe Note: Not for continuous cycling applications. Reference Chart - A Dimension Insulation Thickness Pipe Size 6" 0” (0.0) 1” (25.4) (150) 99/16" (242.9) 103/16" (200) 101/4" (260.3) 111/16" 11/2” (38.1) (258.8) 105/8" 21/2” (63.5) 2” (50.8) (269.9) 11" (279.4) 113/8" (298.4) 123/16" 3” (76.2) (288.9) 113/4" 4” (101.6) (298.4) 121/2" (317.5) (317.5) 131/4" (336.5) (352.4) (281.0) 113/8" (288.9) 113/4" (309.6) 121/2" 10" (250) 113/4" (298.4) 121/8" (308.0) 121/2" (317.5) 1213/16" (325.4) 131/8" (333.4) 137/8" 12" (300) 1111/16" (296.9) 129/16" (319.1) 127/8" (327.0) 131/4" (336.5) 139/16" (344.5) 137/8" (352.4) 145/8" (371.5) (335.0) 139/16" (344.5) 137/8" (352.4) 141/4" (361.9) 147/8" (377.8) (352.4) 1413/16" (360.4) 141/2" (368.3) 147/8" (377.8) 151/2" (393.7) 15" 155/16" (388.9) 155/8" 165/16" (414.3) 8" 11" (279.4) 14" (350) 121/16" 16" (400) 123/4" (323.8) 131/2" (450) 131/2" (342.9) 141/4" 18" (306.4) 127/8" (327.0) 133/16" (342.9) 137/8" (361.9) 145/8" (371.5) (381.0) (396.9) Reference Chart - B Dimension Pipe Rollers & Pipe Supports Insulation Thickness Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) (150) 67/8" 8" (200) 713/16" 10" (250) 12" (300) 14" (350) 105/16" (261.9) 113/8" (288.9) 16" (400) 115/16" (287.3) (312.7) 1213/16" (325.4) 18" (450) 121/4" (311.1) 131/4" 6" 2” (50.8) (174.6) 77/8" (200.0) 83/8" (198.4) 87/8" (225.4) 93/8" 813/16" (223.8) 97/8" (250.8) 107/16" (265.1) 1015/16" (277.8) 93/4" (247.6) 1015/16" (277.8) 125/16" (336.5) 21/2” (63.5) (212.7) 87/8" 93/8" (225.4) (238.1) 97/8" (250.8) 107/16" 113/8" (265.1) 1015/16" (277.8) (288.9) 117/8" 4” (101.6) (250.8) 1015/16" (277.8) 117/8" (301.6) (301.6) 1213/16" (325.4) 113/8" (288.9) 117/8" 117/8" (301.6) 125/16" (312.7) 1213/16" (325.4) 131/4" (336.5) 141/4" (361.9) 131/4" (349.2) 141/4" (361.9) 151/8" (384.2) 143/16" (360.4) 1411/16" (373.1) 151/8" (384.2) 161/16" (408.0) 133/4" (349.2) (301.6) 125/16" (238.1) 3” (76.2) 97/8" (336.5) 133/4" (312.7) 1213/16" (325.4) 133/4" (349.2) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 82 Pipe Rollers & Roller Supports Material: Steel with Malleable Iron Rollers Standard Finish: Electro-Plated Service: Designed to mount on strut (metal framing) for the support of pipe with longitudinal movement. When used with insulated pipe, see B3160-B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. Ordering: Specify part number and finish. Design Load: 2000 Lbs. (8.89kN) Channel and mounting hardware not included. Note: If using D.I. pipe refer to page 237 for sizing. B 4” (101.6) A 213/16” (71.4) Figure B479 Pipe Roller - 16" (400) to 30" (750) Pipe Note: Not for continuous cycling applications. Reference Chart - A Dimension Insulation Thickness 16" 18" 0” (0.0) (400) 153/16" (385.8) (450) 151/2" 1” (25.4) 155/8" (393.7) 16" (406.4) 163/8" 11/2” (38.1) (396.9) 157/8" (406.4) 163/16" 20" (500) (415.9) 169/16" 24" (600) 1613/16" (427.0) 175/16" (439.7) 171/2" 30" (750) 1713/16" (452.4) 183/8" 16" 181/4" (463.5) 21/2” (63.5) 2” (50.8) (403.2) 16" (406.4) 161/4" (411.2) 163/8" (415.9) 169/16" (420.7) 167/8" (444.5) (466.7) 3” (76.2) 4” (101.6) (412.7) 161/2" (420.7) 163/4" (425.4) 173/16" (436.6) (428.6) 1615/16" (430.2) 173/16" (436.6) 171/2" (444.5) 171/2" (444.5) 1711/16" (449.3) 177/8" (454.0) 181/8" (460.4) 189/16" 187/8" 187/8" 191/4" (488.9) (471.5) (476.2) (419.1) (476.2) 17" (431.8) Reference Chart - B Dimension Insulation Thickness Pipe Size 16" 0” (0.0) (400) 1013/16" (274.6) 1” (25.4) 123/8" (301.6) 1215/16" (328.6) 137/16" 2” (50.8) 21/2” (63.5) 3” (76.2) (314.3) 133/8" (341.3) 1315/16" (354.0) 147/16" (366.7) 1415/16" (379.4) 1515/16" (404.8) 147/16" (366.7) 147/8" (377.8) 157/16" (392.1) 157/8" (403.2) 1615/16" (430.2) 157/8" (403.2) 163/8" (415.9) 167/8" (428.6) 173/8" (441.3) 177/8" (454.0) 187/8" 193/8" (492.1) 197/8" 203/8" 205/16" 18" (450) 20" (500) 123/16" (325.4) 1315/16" (354.0) 24" (600) 1413/16" (376.2) 30" 1713/16" (452.4) (476.2) (504.8) (339.7) (517.5) 1315/16" (354.0) 4” (101.6) 1215/16" (328.6) 117/8" (750) 11/2” (38.1) 1115/16" (303.2) 1415/16" (379.4) 187/8" (479.4) (531.8) 2115/16" (557.2) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 83 Pipe Rollers & Pipe Supports Pipe Size Pipe Rollers & Roller Supports Material: Steel with Cast Iron Roller Standard Finish: Plain or Electro-Plated Service: Designed for support of pipe with longitudinal movement. When used with insulated pipe, see B3160-B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 45 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 44. Notes: If using D.I. pipe refer to page 237 for sizing. Non-metallic rollers with stainless steel stand and hardware are available for most sizes (B3117SLNM-Pipe Size). Contact B-Line Engineering for more information. 'A' Center of axle to bottom of plate. 'E' Center of pipe to bottom of base plate. 'G' Dia. 2 Holes 'F' Dia. 4 Holes 'E' 'A' 'J' 'H' 'D' 'B' 'C' Note: Not for continuous cycling applications. Figure B3117SL Steel Roller Stand Part No. Nominal Pipe Size 2" B3117SL-2 to 31/2 B3117SL-4 to 6 21/2" B3117SL-16 to 20 B3117SL-30 B3117SL-36 to 42 (44.4) (44.4) 83/8" (212.7) (212.7) 6" 6" 'D' (152.4) (152.4) 4" 4" 'E' (101.6) 311/16" (93.7) (101.6) 315/16" (100.0) (101.6) 41/4" (107.9) (114.3) (80) (44.4) 31/2" (90) 13/4" (44.4) 83/8" (212.7) 6" (152.4) 4" (101.6) 41/2" 4" (100) 21/16" (52.4) 97/8" (250.8) 6" (152.4) 41/4" (107.9) 5" (127.0) 5" (125) 21/16" (52.4) 97/8" (250.8) 6" (152.4) 41/4" (107.9) 59/16" (141.3) (150) 21/16" (52.4) 97/8" (152.4) 41/4" (107.9) 61/16" (154.0) (200) 37/16" (87.3) 85/8" (127.0) 813/16" (223.8) (250) 37/16" (87.3) 85/8" (127.0) 97/8" (250.8) (300) 37/8" (98.4) 1015/16" (152.4) 117/16" (290.5) 14" (350) 37/8" (98.4) 1015/16" (277.8) 8" (203.2) 6" (152.4) 121/16" (306.4) 16" (400) 41/4" (107.9) 123/8" (314.3) 10" (254.0) 61/2" (165.1) 135/8" (346.1) (450) 41/4" (107.9) 123/8" (254.0) 61/2" (165.1) 1411/16" (373.1) (500) 41/4" (107.9) 123/8" (254.0) 61/2" (165.1) 1511/16" (398.5) (600) 43/8" (111.1) 131/2" (254.0) 61/2" (165.1) 1711/16" (449.3) (750) 51/8" (203.2) 213/4" (552.4) (900) 53/4" (203.2) 255/16" (642.9) 42" (1050) 53/4" (203.2) 285/16" (719.1) 3" 8" 12" 18" 20" B3117SL-24 (65) 13/4" 'C' 83/8" 10" B3117SL-12 to 14 (50) 'B' 83/8" 13/4" 6" B3117SL-8 to 10 'A' 13/4" 24" 30" 36" Pipe Rollers & Pipe Supports Dia. 'F' Part No. B3117SL-2 to 31/2 1/2" B3117SL-4 to 6 1/2" (12.7) B3117SL-8 to 10 5/8" (15.9) B3117SL-12 to 14 3/4" (19.0) B3117SL-16 to 20 13/16" (20.6) B3117SL-24 13/16" B3117SL-30 B3117SL-36 to 42 (130.2) (146.0) (146.0) (212.7) (250.8) (219.1) (219.1) (314.3) (314.3) 17" 20" 6" 8" 8" 8" 10" 10" (342.9) 10" (431.8) 103/4" (508.0) 20" Dia. 'G' (277.8) 6" (508.0) 12" 12" (152.4) (203.2) (203.2) (203.2) (273.0) (304.8) (304.8) 4" 5" 5" 6" 8" 9" 9" Design Load 'H' 37/16" 1" (25.4) 1" Wt./C Lbs. kN Lbs. kg (87.3) 63/8" (161.9) 390 (1.73) 508 (230.4) 411/16" (119.1) 77/8" (200.0) 950 (4.22) 631 (286.2) (25.4) 7" (177.8) 4" (101.6) 2100 (9.34) 1271 (576.5) 1" (25.4) 91/16" (230.2) 53/4" (146.0) 3075 (13.68) 1994 (904.5) 1" (25.4) 101/4" (260.3) 63/4" (171.4) 4980 (22.15) 3423 (1552.7) (20.6) 1" (25.4) 113/8" (288.9) 71/2" (190.5) 6100 (27.13) 4710 (2136.4) 11/16" (27.0) 1" (25.4) 141/4" (361.9) 10" (254.0) 7500 (33.36) 7132 (3235.1) 13/16" (30.2) 1" (25.4) 17" (431.8) 12" (304.8) 12000 (53.37) 10386 (4711.1) (12.7) (25.4) 'J' 1" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 84 Pipe Rollers & Roller Supports Material: Steel with Cast Iron Roller Standard Finish: Plain or Electro-Plated Service: Designed for support of pipe where longitudinal movement and vertical adjustment are required. When used with insulated pipe, see B3160B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. 'F' 'C' Center of pipe to bottom of base plate. 'C' 'D' Center to center of mounting holes in bottom plate. 'A' 'D' 'E' Dia. Mounting holes in bottom plate. 'B' 'E' Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 47 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 46. Notes: If using D.I. pipe refer to page 237 for sizing. Non-metallic rollers with stainless steel stand and hardware are available for most sizes (B3118SLNMPipe Size). Contact B-Line Engineering for more information. Note: Not for continuous cycling applications. Figure B3118SL Adjustable Roller Stand with Base Plate Nominal Pipe Size 2" B3118SL-2 to 31/2 21/2" 3" 31/2" 4" B3118SL-4 to 6 5" 6" 8" B3118SL-8 to 10 10" 12" B3118SL-12 to 14 14" 16" B3118SL-16 to 20 18" 20" B3118SL-24 B3118SL-30 24" 30" 'C' 'A' (50) 67/8" (65) 67/8" (80) 67/8" (90) 67/8" (100) 81/8" (125) 81/8" (150) 81/8" (200) 105/8" (250) 105/8" (300) 13" (350) 13" (400) 145/8" (450) 145/8" (500) 145/8" (600) 153/4" (750) 191/4" 'B' (174.6) (174.6) (174.6) (174.6) (206.4) (206.4) (206.4) (269.9) (269.9) (330.2) (330.2) (371.5) (371.5) (371.5) 6" (152.4) 6" 6" 6" 6" 6" 6" 8" 8" 8" 8" 10" 10" 10" (400.0) 10" (488.9) 101/2" 'E' 'F' 43/4" (152.4) 5" (152.4) 55/16" (152.4) 59/16" (152.4) 63/16" (152.4) 63/4" (152.4) 71/4" (203.2) 101/8" (203.2) 113/16" (203.2) 123/4" (203.2) 133/8" (254.0) 153/8" (254.0) 163/8" (254.0) 173/8" (254.0) 191/4" (266.7) 247/16" Design Load Part No. Minimum (120.6) 55/8" (127.0) 57/8" (134.9) 63/16" (141.3) 67/16" (157.2) 77/16" (171.4) 8" (184.1) 81/2" (257.2) 1111/16" (284.2) 123/4" (323.8) 141/8" (339.7) 143/8" (390.5) 171/4" (415.9) 181/4" (441.3) 191/4" (488.9) 211/4" (620.7) 2611/16" kN Lbs. kg 1" (25.4) 1" (25.4) 390 (1.73) 1100 (498.9) B3118SL-4 to 6 1" (25.4) 1" (25.4) 950 (4.22) 1310 (594.2) (25.4) 11/8" (28.6) 2100 (9.34) 2725 (1236.0) (25.4) 11/8" (28.6) 3075 (13.68) 3612 (1638.4) (25.4) 11/4" (31.7) 4980 (22.15) 6384 (2895.8) (25.4) 13/8" (34.9) 6100 (27.13) 8437 (3827.0) (25.4) 15/8" (41.3) 7500 (33.36) 12528 (5682.7) B3118SL-12 to 14 B3118SL-16 to 20 B3118SL-24 B3118SL-30 1" 1" 1" 1" 1" 'D' (142.9) 37/8" (98.4) (142.9) 37/8" (98.4) (157.2) 37/8" (98.4) (163.5) 37/8" (98.4) (188.9) 51/8" (130.2) (203.2) 51/8" (130.2) (215.9) 51/8" (130.2) (296.9) 73/8" (187.3) (323.8) 73/8" (187.3) (358.8) 91/2" (241.3) (365.1) 91/2" (241.3) (438.1) 111/8" (282.6) (463.5) 111/8" (282.6) (488.9) 111/8" (282.6) (539.7) 121/4" (311.1) (677.9) 153/4" (400.0) Wt./C Lbs. B3118SL-2 to 31/2 B3118SL-8 to 10 Maximum All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 85 Pipe Rollers & Pipe Supports Part No. Pipe Rollers & Roller Supports 'B' Center of pipe to bottom of plate. 'C' Center of pipe to center of roller. 'D' 'D' Length of Roller 'E' 'E' Center to center of mounting holes in bottom plate. 'C' 'F' Roller Travel 'A' 'B' 'G' Dia. 1 hole for sizes 2 thru 6 2 holes for sizes 8 thru 30 'G' Material: Steel with Cast Iron Roller Standard Finish: Plain or Electro-Plated Service: Designed for support of pipe with longitudinal movement. When used with insulated pipe, see B3160-B3165 Pipe Covering Protection Saddle charts for proper sizing on pages 118 thru 123. Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 46 and Manufacturers Standardization Society MSS SP-69 & Sp-58 Type 45. Notes: If using D.I. pipe refer to page 237 for sizing. Non-metallic rollers with stainless steel base are available for most sizes (B3119SLNM-Pipe Size). Contact B-Line Engineering for more information. Note: Not for continuous cycling applications. Figure B3119SL Roller with Steel Base Plate Part No. B3119SL-2 to 31/2 B3119SL-4 to 6 B3119SL-8 to 10 B3119SL-12 to 14 Nominal Pipe Size 2" (50) 21/2" (65) Structural Channel Size C4 x 5.4 'A' 'B' 'C' 'D' 43/4" (120.6) 31/16" (77.8) 115/16" (49.2) 23/4" (69.8) 43/4" (120.6) 35/16" (84.1) 23/16" (55.6) 23/4" (69.8) 43/4" (120.6) 35/8" (92.1) 21/2" (63.5) 23/4" (69.8) (90) 43/4" (120.6) 37/8" (98.4) 23/4" (69.8) 23/4" (69.8) 4" (100) 53/4" (146.0) 41/8" (104.8) 215/16" (74.6) 33/4" (95.2) 5" (125) 53/4" (146.0) 411/16" (119.1) 31/2" (88.9) 33/4" (95.2) 6" (150) 53/4" (146.0) 53/16" (131.8) 4" (101.6) 33/4" (95.2) 8" (200) 8" (203.2) 73/16" (182.6) 53/8" (136.5) 6" (152.4) 10" (250) 8" (203.2) 81/4" (209.5) 67/16" (163.5) 6" (152.4) 12" (300) 10" (254.0) 913/16" (249.2) 79/16" (192.1) 8" (203.2) (254.0) 107/16" (265.1) 83/16" (208.0) 8" (203.2) 11" (279.4) 117/8" (301.6) 93/8" (238.1) 9" (228.6) 11" (279.4) 1215/16" (328.6) 107/16" (265.1) 9" (228.6) 11" (279.4) 1315/16" (354.0) 117/16" (290.5) 9" (228.6) 3" 31/2" 14" (80) C5 x 6.7 C6 x 8.2 C8 x 11.5 10" (350) 16" (400) 18" (450) 20" (500) B3119SL-24 24" (600) C8 x 11.5 12" (304.8) 1513/16" (401.6) 135/16" (338.1) 10" (254.0) B3119SL-30 30" (750) C10 x 15.3 141/2" (368.3) 195/8" (498.5) 165/8" (422.3) 121/2" (317.5) B3119SL-16 to 20 Pipe Rollers & Pipe Supports Part No. B3119SL-2 to 31/2 B3119SL-4 to 6 B3119SL-8 to 10 B3119SL-12 to 14 B3119SL-16 to 20 B3119SL-24 B3119SL-30 C8 x 11.5 'E' 3" 4" 4" 4" 6" 'F' - 13/4" - 21/2" (76.2) 21/2" (101.6) 35/8" (101.6) 31/8" (101.6) 31/8" (152.4) 41/8" Dia. 'G' Design Load Lbs. kN Wt./C Lbs. kg (44.4) 9/16" (14.3) 390 (1.73) 314 (142.3) (63.5) 11/16" (17.5) 950 (4.22) 489 (225.9) (63.5) 13/16" (20.6) 2100 (9.34) 950 (430.9) (92.1) 13/16" (20.6) 3075 (13.68) 1741 (789.7) (79.4) 13/16" (20.6) 4980 (22.15) 2018 (915.3) (79.4) 13/16" (20.6) 6100 (27.13) 2175 (986.6) (104.8) 13/16" (20.6) 7500 (33.36) 3510 (1592.1) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 86 Pipe Rollers & Roller Supports Material: Steel 'A' (Rod Size) Hanger Rod Not Included Standard Finish: Plain or Electro-Plated Service: Designed for use with B3114 as a cushion spring for a piping system where vertical movement does not exceed 11/4" (31.7). Ordering: Specify part number, size and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 50 and Manufacturers' Standardization Society SP-69 & SP-58 Type 49. 'C' 'D' Includes: 2 Springs 4 Cup Washers Figure B3264 Spring Cushion Hanger Part No. Rod Size 'A' Spring Deflection Per Spring Free Height 'C' 3/8"-16 3" B3264-5 3/4"-10 B3264-6 1"-8 Wt./CPR Lbs./In. kg/mm Lbs. kN Lbs. kg (76.2) 111/16" (42.8) 30 (0.5) 78 (.34) 100 (45.3) 45/8" (117.5) 25/16" (58.7) 707 (12.6) 1500 (6.67) 400 (181.4) 47/8" (123.8) 31/4" (82.5) 1600 (28.6) 3200 (14.23) 700 (317.5) Pipe Rollers & Pipe Supports B3264-1 'D' Maximum Load at 1" (25.4) Deflection-2 Springs All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 87 Pipe Rollers & Roller Supports Material: Cast Iron 'C' 'C' Center of axle to center of pipe. Standard Finish: Plain or Electro-Plated 'B' 'D' Axle Dia Service: Designed for supporting pipe runs with longitudinal movement. Use with steel rod axle. Ordering: Specify part number and finish. 'A' 'L' Notes: If using D.I. pipe refer to page 237 for sizing. Non-metallic roller with stainless steel axle sleeve are available for most sizes (BFP3114R-Pipe Size). Contact B-Line Engineering for more information. Figure B3114R Long Pattern Pipe Roller Only Part No. B3114R-2 B3114R-21/2 B3114R-3 B3114R-31/2 B3114R-4 B3114R-5 Nominal Pipe Size 'A' (50) 11/16" 21/2" 3" 31/2" 2" 4" 5" 'B' (27.0) 3/4" (65) 11/4" (80) 13/8" (90) 11/2" (100) 119/32" (125) 17/8" Axle Dia. 'D' 'C' (19.0) 19/16" (39.7) 3/8" (31.7) 7/8" (22.2) 17/8" (34.9) 7/8" (22.2) 23/16" (38.1) 1" (25.4) 21/2" (25.4) 23/4" Wt./C 'L' Lbs. kg (9.5) 25/8" (66.7) 29 (13.1) (47.6) 1/2" (12.7) 31/8" (79.4) 47 (21.3) (55.6) 1/2" (12.7) 33/4" (95.2) 62 (28.1) (63.5) 1/2" (12.7) 41/4" (107.9) 71 (32.2) (69.8) 1/2" (12.7) 43/4" (120.6) 96 (43.5) (59.4) (40.5) 1" (47.6) 11/8" (28.6) 33/8" (85.7) 5/8" (15.9) 513/16" (147.6) 131 B3114R-6 6" (150) 21/8" (54.0) 11/4" (31.7) 315/16" (100.0) 3/4" (19.0) 67/8" (174.6) 207 (93.9) B3114R-8 8" (200) 25/8" (66.7) 11/2" (38.1) 51/16" (128.6) 7/8" (22.2) 87/8" (225.4) 323 (146.5) B3114R-10 10" (250) 33/16" (81.0) 13/4" (44.4) 61/4" (158.7) 7/8" (22.2) 11" (279.4) 482 (218.6) (300) 33/4" (95.2) 2" (50.8) 73/8" (187.3) 1" (25.4) 13" (330.2) 854 (387.4) B3114R-12 12" B3114R-14 14" (350) 43/8" (111.1) 21/2" (63.5) 81/4" (209.5) 11/8" (28.6) 141/4" (361.9) 1150 (521.6) B3114R-16 16" (400) 45/8" (117.5) 21/2" (63.5) 91/4" (234.9) 11/4" (31.7) 161/4" (412.7) 1200 (544.3) B3114R-18 18" (450) 51/8" (130.2) 23/4" (69.8) 103/8" (263.5) 11/4" (31.7) 181/4" (463.5) 1550 (703.1) (500) 55/8" (76.2) 111/2" (292.1) 13/8" (34.9) 201/4" (514.3) 2080 (943.5) (600) 63/4" (92.1) 1313/16" (350.8) 11/2" (38.1) 241/4" (615.9) 3300 (1496.9) (750) 81/2" (114.3) 171/4" (438.1) 13/4" (44.4) 301/4" (768.3) 6200 (2812.3) B3114R-20 B3114R-24 B3114R-30 20" 24" 30" (142.9) 3" (171.4) 35/8" (215.9) 41/2" Pipe Rollers & Pipe Supports All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 88 Pipe Rollers & Roller Supports Material: Cast Iron Standard Finish: Plain or Electro-Plated Service: Designed for supporting pipe runs with longitudinal movement. Use with steel rod axle. Ordering: Specify part number and finish. Notes: If using D.I. pipe refer to page 237 for sizing. Non-metallic roller with stainless steel axle sleeve are available for most sizes (BFP3117R-Pipe Size). Contact B-Line Engineering for more information. 'D' 'A' Axle Dia 'L' Figure B3117R Short Pattern Pipe Roller Only Nominal Pipe Size Part No. B3117R-2 to 31/2 B3117R-4 to 6 B3117R-8 to 10 2" to 31/2" 4" to 6" 8", 10" Axle Dia. 'A' (50 to 90) 1/2" (100 to 150) 1/2" (200 to 250) 3/4" Wt./C 'D' (12.7) 17/8" 'L' Lbs. kg (47.6) 23/4" (69.8) 70 (31.7) (12.7) 21/16" (52.4) 33/4" (95.2) 114 (51.7) (19.0) 31/4" (82.5) 6" (152.4) 329 (149.2) (22.2) 4" (101.6) 8" (203.2) 600 (272.1) B3117R-12 to 14 12", 14" (300 to 350) 7/8" B3117R-16 to 20 16" to 20" (400 to 500) 11/8" (28.6) 41/2" (114.3) 9" (228.6) 781 (354.2) B3117R-24 24" (600) 11/4" (31.7) 47/16" (112.7) 10" (254.0) 842 (381.9) B3117R-30 30" (750) 13/4" (44.4) 51/2" (139.7) 121/2" (317.5) 1385 (628.2) 36" to 42" (900 to 1050) 2" (50.8) 6" (152.4) 147/8" (377.8) 1585 (718.9) Pipe Rollers & Pipe Supports B3117R-36 to 42 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 89 Pipe Supports, Guides, Shields & Saddles Pipe supports offered in this section are designed to support pipe from a base structure where vertical adjustment may be required. Pipe guides and slides are designed to allow longitudinal movement due to thermal expansion and contraction of pipe. Protection shields and saddles are designed to prevent damage to pipe insulation. Materials Carbon Steel is used in the manufacturing of pipe supports, guides, shields and saddles. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Plated Zinc (ASTM B 633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A 123), Red Primer, Dura-Green® and other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, Copper plated, or in Stainless Steel. Approvals (as noted) Supports, Guides, Shields & Saddles Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society MSS SP-69 & SP-58. All pipe hangers and supports in this section are sized to fit schedule 40/80 pipe unless otherwise noted. Some steel items may be specially fabricated to fit other pipe diameters i.e. ductile iron, cast iron, etc. See pipe data charts on pages 236 thru 241 for proper size selection. 90 Pipe Supports, Guides, Shields & Saddles Figure B3380 thru B3387 360° Calcium Silicate Shield Pre-Insulated Support Material: Asbestos-free, Hydrous Calcium Silicate Insulation with Pre-Galvanized steel jacket Service: Designed to provide a crush resistant insulation insert at pipe support points. Can be used with hangers or straps. Chilled Water Type Miscellaneous Information: Flame retardant, water and rot resistant, temperature range from ambient to 1200°F (649°C). Easily installed in a pipe hanger or mounted to strut. Ordering: Specify part number. (See part number legend below.) For additional information, contact factory. Applications Standard Temperature Type Pipe Hanger Strut Mounted Prefix B338 Commercial Duty, All Purpose Support * * Other models available Consult Factory Insulation Thickness 0 1 2 3 4 6 7 = = = = = = = 1/2” (13mm) 3/4” (19mm) 1” (25mm) 11/2” (38mm) 2” (51mm) 3” (76mm) 4” (101mm) Pipe Type Pipe Size CT = Copper Tubing Sizes Blank = Std. Sch. 40 Steel Nominal Pipe or Copper Tubing Size Note: Up to 24” (600) pipe size All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 91 Supports, Guides, Shields & Saddles B338 0 CT - 3 Pipe Supports, Guides, Shields & Saddles **Height from top of pipe to bottom of plate. Material: Steel Stand Pipe Size **Specify Height Standard Finish: Plain or Electro-Plated Service: Designed as an unthreaded base stand for Pipe Supports B3090, B3095, B3094 and B3096. 'H' 4 Holes 'A' Ordering: Specify part number, height and finish. 'A' Note: Match B3088 part number with dimension 'D' from B3090 (pags 96 & 97), B3095 (pages 98 & 99) or B3096 (page 94) charts. Plate Size Figure B3088 Base Stand Part No. B3088-3/4 1/4" B3088-1 1/4" B3088-11/4 1/4" B3088-11/2 1/4" B3088-2 1/4" 3/8" B3088-21/2 Stand Pipe Size Plate Size B3088-3 3/8" B3088-4 1/2" B3088-6 1/2" x 6" x 6" x 6" x 6" (6.3 x 152.4 x 152.4) 3/4" Dia. 'H' 'A' (20) 7/8" (25) 7/8" Wt./C* Lbs. kg (22.2) 3/4" (14.3) 420 (190.5) (22.2) 3/4" (14.3) 480 (216.0) (14.3) 590 (267.6) (6.3 x 152.4 x 152.4) 1" (6.3 x 152.4 x 152.4) 11/4” (32) 7/8" (22.2) 3/4" x 6" x 6" (6.3 x 152.4 x 152.4) 11/2" (40) 7/8" (22.2) 3/4" (14.3) 655 (297.1) x 6" x 6" (6.3 x 152.4 x 152.4) 2" (50) 7/8" (22.2) 3/4" (14.3) 1211 (549.3) x 8" x 8" (9.5 x 203.2 x 203.2) 21/2" (65) 11/4" (31.7) 13/16" (14.3) 2376 (1077.7) (80) 11/2" (38.1) 13/16" (20.6) 3137 (1422.9) (100) 11/2" (38.1) 15/16" (23.8) 4338 (1967.7) (150) 11/2" (38.1) 11/8" (28.6) 7378 (3346.6) x 6" x 6" x 12" x 12" x 12" x 12" x 18" x 18" (9.5 x 203.2 x 203.2) (12.7 x 304.8 x 304.8) (12.7 x 304.8 x 304.8) 3" 4" 6" *Based on a height of 18" (457.2). **Height from top of pipe to bottom of plate. Material: Steel 'TL' Thread Length Standard Finish: Plain or Electro-Plated Stand Pipe Size **Specify Height Service: Designed as a threaded base stand for Pipe Supports B3089, B3091, B3092, B3093 and B3097. 'H' 4 Holes 'A' Ordering: Specify part number, height and finish. 'A' Note: Match B3088T part number with dimension 'D' from B3089 (page 95), B3092 (page 100 & 101) and B3093 (page 102 & 103) charts. Plate Size Figure B3088T Threaded Base Stand Part No. Plate Size Stand Pipe Size Dia. 'H' 'A' Wt./C* 'TL' Lbs. kg Supports, Guides, Shields & Saddles B3088T-1 1/4"x 6"x 6" (6.3 x 152.4 x 152.4) 1" (25) 7/8" (22.2) 3/4" (19.0) 11/2" (38.1) 495 (224.5) B3088T-11/4 1/4"x 6"x 6" (6.3 x 152.4 x 152.4) 11/4" (32) 7/8" (22.2) 3/4" (19.0) 11/2" (38.1) 583 (264.4) B3088T-11/2 1/4"x 6"x 6" (6.3 x 152.4 x 152.4) 11/2" (40) 7/8" (22.2) 3/4" (19.0) 11/2" (38.1) 649 (294.4) B3088T-2 1/4"x 6"x 6" (50) 7/8" (22.2) 3/4" (19.0) 11/2" (38.1) 785 (356.1) B3088T-21/2 3/8"x 8"x 8" (65) 11/4" (31.7) 13/16" (20.6) 11/2" (38.1) 1524 (691.3) (20.6) 11/2" (38.1) (6.3 x 152.4 x 152.4) 2" (9.5 x 203.2 x 203.2) 21/2" B3088T-3 3/8"x 12"x 12" (9.5 x 304.8 x 304.8) 3" (80) 11/2" (38.1) 13/16" 2624 (1190.2) B3088T-4 1/2"x 12"x 12" (12.7 x 304.8 x 304.8) 4" (100) 11/2" (38.1) 15/16" (23.8) 2" (50.8) 3594 (1630.2) B3088T-6 1/2"x 18"x 18" (12.7 x 457.2 x 457.2) 6" (150) 11/2" (38.1) 11/8" (28.6) 2" (50.8) 7346 (3332.1) *Based on a height of 18" (457.2). All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 92 Pipe Supports, Guides, Shields & Saddles *Height from top of pipe to bottom of plate. Material: Steel Stand Pipe Size *Specify Height Standard Finish: Plain or Electro-Plated Service: Designed as an unthreaded base stand for Pipe Supports B3090, B3095, B3094 and B3096. Designed to meet requirements of 12X anchor diameter hole spacing for seismic applications. The standard B3088-3 & B3088-6 already meet this requirement. 'H' 4 Holes 'A' 'A' Ordering: Specify part number, height and finish. Plate Size Note: Match B3088 part number with dimension 'D' from B3090 (pags 96 & 97), B3095 (pages 98 & 99) or B3096 (page 94) charts. Figure B3088S Seismic Base Stand Part No. B3088S-3/4 1/4" B3088S-1 1/4" B3088S-11/4 1/4" B3088S-11/2 1/4" B3088S-2 1/4" B3088S-21/2 B3088S-4 Stand Pipe Size Plate Size x 8" x 8" x 8" x 8" x 8" x 8" 3/4" (6.3 x 203.2 x 203.2) (6.3 x 203.2 x 203.2) 1" (6.3 x 203.2 x 203.2) 11/4” (6.3 x 203.2 x 203.2) 11/2" 1" (20) 1" (25) 1" (20) 1" (32) Wt./C* Lbs. kg (25.4) 9/16" (14.3) 618 (280.3) (25.4) 9/16" (14.3) 708 (321.1) (25.4) 9/16" (14.3) 798 (362.0) (25.4) 9/16" (14.3) 858 (389.2) x 8" x 8" (6.3 x 203.2 x 203.2) 2" (50) 1" (25.4) 9/16" (14.3) 993 (450.4) x 81/2" x 81/2" (9.5 x 215.9 x 215.9) 21/2" (65) 11/4" (31.7) 9/16" (14.3) 1638 (743.0) x 131/2" x 131/2" (12.7 x 342.9 x 342.9) 4" (100) 11/2" (38.1) 15/16" (23.8) 4202 (1906.0) 3/8" 1/2" x 8" x 8" Dia. 'H' 'A' *Based on a height of 18" (457.2). Material: Steel *Height from top of pipe to bottom of plate. 'TL' Thread Length Standard Finish: Plain or Electro-Plated Service: Designed as a threaded base stand for Pipe Supports B3089, B3091, B3092, B3093 and B3097. Designed to meet requirements of 12X anchor diameter hole spacing for seismic applications. The standard B3088T-3 & B3088T-6 already meet this requirement. Stand Pipe Size *Specify Height 'H' 4 Holes 'A' 'A' Ordering: Specify part number, height and finish. Plate Size Note: Match B3088T part number with dimension 'D' from B3089 (page 95), B3092 (page 100 & 101) and B3093 (page 102 & 103) charts. Figure B3088ST Threaded Seismic Base Stand Plate Size Stand Pipe Size 'A' B3088ST-1 1/4" x 8" x 8" (6.3 x 203.2 x 203.2) (25) 1" B3088ST-11/4 1/4" x 8" x 8" (6.3 x 203.2 x 203.2) 11/4" (32) 1" B3088ST-11/2 1/4" x 8" x 8" (6.3 x 203.2 x 203.2) 11/2" (40) 1/4" x 8" x 8" (6.3 x 203.2 x 203.2) 2" (9.5 x 215.9 x 215.9) 21/2" B3088ST-2 B3088ST-21/2 B3088ST-4 3/8" 1/2" x x 81/2" 131/2" x 81/2" x 131/2" (12.7 x 342.9 x 342.9) 1" 4" Dia. 'H' Wt./C* 'TL' Lbs. kg (25.4) 9/16" (14.3) 11/2" (38.1) 708 (321.1) (25.4) 9/16" (14.3) 11/2" (38.1) 798 (362.0) 1" (25.4) 9/16" (14.3) 11/2" (38.1) 858 (389.2) (50) 1" (25.4) 9/16" (14.3) 11/2" (38.1) 993 (450.4) (65) 11/4" (31.7) 9/16" (14.3) 11/2" (38.1) 1638 (743.0) (100) 11/2" (38.1) 15/16" (23.8) 2" (50.8) 4202 (1906.0) *Based on a height of 18" (457.2). All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 93 Supports, Guides, Shields & Saddles Part No. Pipe Supports, Guides, Shields & Saddles Material: Steel Steel Size Standard Finish: Plain or Electro-Plated Service: Designed for support of horizontal pipe from floor stanchions (B3088 or B3088S) where vertical adjustment is required. 'A' Thread Size Ordering: Specify part number and finish. 8" Hex Nut Included Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 39 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 38. (203.2) Shank will fit into Sch. 40 Pipe Size ‘D’ Figure B3096 Adjustable Pipe Saddle Support Part No. B3096-2 Nominal Pipe Size Maximum O.D. of Pipe Thread ‘D’ Size 'A' (Base Stand Not Included) 2" (50) 23/8" (60.3) 7/8"-9 1" (25) Wt./C Steel Size 3/8" kg (96.1) x 2" (9.5 x 50.8) 212 21/2" B3096-3 3" (80) 31/2" (88.9) 7/8"-9 1" (25) (9.5 x 63.5) 259 (117.5) B3096-4 4" (100) 41/2" (114.3) 1"-8 1" (25) 3/8" x 3" (9.5 x 76.2) 370 (167.8) B3096-5 5" (125) 59/16" (141.3) 1"-8 1" (25) 3/8" x 3" (9.5 x 76.2) 404 (183.2) B3096-6 6" (150) 65/8" (168.3) 11/4"-7 11/4" (32) 1/2" 714 (323.9) (200) 85/8" (219.1) 11/4"-7 11/4" (32) 1/2" (250) 103/4" (273.0) 11/2"-6 11/2" (300) 123/4" (323.8) 11/2"-6 11/2" B3096-8 B3096-10 B3096-12 8" 10" 12" 3/8" Lbs. x x 31/2" (12.7 x 88.9) 31/2" (12.7 x 88.9) 819 (371.5) (40) 1/2" x 4" (12.7 x 101.6) 1194 (541.6) (40) 1/2" x 4" (12.7 x 101.6) 1315 (596.5) x Supports, Guides, Shields & Saddles All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 94 Pipe Supports, Guides, Shields & Saddles Material: Steel Pipe/Malleable Iron Reducer 'B' Pipe Size Standard Finish: Plain or Electro-Plated 'C' Center of pipe to bottom of pipe reducer. Service: Designed to provide up to 41/2" (114.3) vertical adjustment after pipe installation. For use with B3090, B3094 and B3095 Pipe Saddle Supports and B3088T or B3088ST Threaded Base Stands. 'C' Ordering: Specify part number and finish. 'D' Nominal pipe size of base stand - not included Figure B3089 Pipe Adjuster B3089-3/4 B3089-11/2 B3089-21/2 B3089-3 B3089-4 Part No. B3089-3/4 B3089-11/2 B3089-21/2 B3089-3 B3089-4 To Support Nominal Pipe Size 11/2" 2" 21/2" 3" 'D' 'B' (40) (50) Wt./C (Not Supplied) Lbs. kg 3/4" (20) 11/2" (40) 140 (63.5) 11/2" (40) 21/2" (65) 400 (181.4) 21/2" (65) 3" (80) 700 (317.5) 3" (80) 4" (100) 1000 (453.6) 4" (100) 6" (150) 2200 (997.9) (65) (80) 31/2" (90) 4" 5" 6" (100) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" 24" (500) 30" (750) 36" (900) (125) (150) (600) To Support Nom. Pipe Size 'C' When used with B3090 Minimum Maximum 'C' When used with B3095 Minimum Maximum 11/2" (40) 61/4" (158.8) 103/4" (273.1) 6" (152.4) 101/2" (266.7) 2" 21/2" 3" 31/2" 4" 5" 6" 8" 10" 12" (50) 67/16" 83/8" 811/16" 815/16" 915/16" 101/4" 113/16" 1211/16" 1311/16" 147/8" (163.5) (277.8) (366.7) 1011/16" 127/16" 125/8" 127/8" 1315/16" 141/4" 1415/16" 167/8" 1715/16" 1815/16" (271.5) (492.1) 63/16" 715/16" 81/8" 83/8" 97/16" 93/4" 107/16" 123/8" 137/16" 147/16" (157.2) (377.8) 1015/16" 127/8" 133/16" 137/16" 147/16" 143/4" 1511/16" 173/16" 183/16" 193/8" (457.2) 221/2" (571.5) 183/16" (462.0) 2211/16" (576.3) (482.6) 231/2" (596.9) 193/16" (487.4) 2311/16" (601.7) (546.1) 26" 27" (660.4) 301/4" 333/8" 363/8" (768.3) 14" 16" (65) (80) (90) (100) (125) (150) (200) (250) (300) (212.7) (220.7) (227.0) (252.4) (260.3) (284.2) (322.3) (347.7) (327.0) (335.0) (341.3) (366.7) (374.6) (398.5) (436.6) (462.0) (201.6) (206.4) (212.7) (239.7) (247.6) (265.1) (314.3) (341.3) (400) 18" 19" 18" 20" (450) 219/16" (547.7) 261/16" (662.0) 211/2" (500) 229/16" (573.1) 271/16" (687.4) 221/2" (571.5) 24" 30" 36" (600) 249/16" 2811/16" 3111/16" (623.9) 291/16" 333/16" 363/16" (738.2) 253/4" 287/8" 317/8" (654.0) (350) (750) (900) (728.7) (804.9) (843.0) (919.2) (733.4) (809.6) (315.9) (320.7) (327.0) (354.0) (361.9) (379.4) (428.6) (455.6) (481.0) (685.8) (847.7) (923.9) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 95 Supports, Guides, Shields & Saddles Part No. Pipe Supports, Guides, Shields & Saddles Material: Steel 'A' U-Bolt Dia. Standard Finish: Plain or Electro-Plated Service: Designed for support of horizontal pipe from floor. U-Bolt and Hex Nuts are provided to hold pipe securely to the saddle. Use with B3088 or B3088S Base Stands. 'C' 'C' Center of pipe to bottom lip of support. Steel Size 4" Ordering: Specify part number and finish. Gussets on sizes B3090-8 and larger. (101.6) 'B' (Shank Dia.) Shank will fit into Schedule 40 pipe size 'D'. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 38 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 37. Figure B3090 Pipe Support with U-Bolt Part No. B3090-3/4 B3090-1 B3090-11/4 B3090-11/2 B3090-2 B3090-21/2 B3090-3 B3090-31/2 B3090-4 B3090-5 B3090-6 B3090-8 B3090-10 B3090-12 B3090-14 B3090-16 B3090-18 B3090-20 B3090-24 B3090-30 B3090-36 Nominal Pipe Size 3/4" 1" 11/4" 11/2" 2" 21/2" 3" 31/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" (20) (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) (750) (900) Maximum O.D. of Pipe 13/8" 13/8" 111/16" 2" 27/16" 27/8" 31/2" 4" 47/8" 55/8" 629/32" 91/8" 113/32" 133/16" 14" 16" 18" 20" 24" 30" 36" (34.9) (34.9) (42.9) (50.8) (61.9) (73.0) (88.9) (101.6) (123.8) (142.9) (175.4) (231.8) (281.8) (335.0) (355.6) (406.4) (457.2) (508.0) (609.6) (762.0) (914.4) Steel Size 1/4" x 11/2" 1/4" x 11/2" 1/4" x 2" 1/4" x 2" 1/4" x 2" 1/4" x 3" 1/4" x 3" 1/4" x 3" 3/8" x 31/2" 3/8" x 31/2" 1/2" x 31/2" 1/2" x 31/2" 1/2" x 31/2" 1/2" x 31/2" 5/8" x 4" 5/8" x 4" 3/4" x 5" x 5" 1" x 5" 1" x 5" 1" x 5" 3/4" (6.3 x 38.1) (6.3 x 38.1) (6.3 x 50.8) (6.3 x 50.8) (6.3 x 50.8) (6.3 x 76.2) (6.3 x 76.2) (6.3 x 76.2) (9.5 x 88.9) (9.5 x 88.9) (12.7 x 88.9) (12.7 x 88.9) (12.7 x 88.9) (12.7 x 88.9) (19.0 x 101.6) (19.0 x 101.6) (19.0 x 127.0) (19.0 x 127.0) (25.4 x 127.0) (25.4 x 127.0) (25.4 x 127.0) 'A' 1/4" 1/4" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 5/8" 5/8" 3/4" 7/8" 7/8" 7/8" 1" 1" 1" 1" 1" (6.4) (6.4) (9.5) (9.5) (9.5) (12.7) (12.7) (12.7) (12.7) (12.7) (15.9) (15.9) (19.0) (22.2) (22.2) (22.2) (25.4) (25.4) (25.4) (25.4) (25.4) Note: 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3090DI - size. 3” (80) Ductile Iron uses B3090-31/2 Supports, Guides, Shields & Saddles All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 96 Pipe Supports, Guides, Shields & Saddles 'A' U-Bolt Dia. 'C' 'C' Center of pipe to bottom lip of support. Steel Size 4" Gussets on sizes B3090-8 and larger. (101.6) 'B' (Shank Dia.) Shank will fit into Schedule 40 pipe size 'D'. Figure B3090 Pipe Support with U-Bolt (cont.) 'D' (Base Stand Part No. 'B' 'C' B3090-3/4 3/4" (19.0) B3090-1 B3090-11/4 B3090-11/2 B3090-2 B3090-21/2 B3090-3 B3090-31/2 B3090-4 B3090-5 B3090-6 B3090-8 B3090-10 B3090-12 B3090-14 B3090-16 B3090-18 B3090-10 B3090-24 B3090-30 B3090-36 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 3/4" (19.0) 15/16" (33.3) 15/16" 15/16" 23/8" 23/8" 23/8" 23/8" 23/8" 23/8" 27/8" 27/8" 4" 4" 4" 4" 4" (33.3) (33.3) (60.3) (60.3) (60.3) (60.3) (60.3) (60.3) (73.0) (73.0) (101.6) (101.6) (101.6) (101.6) (101.6) 2" 25/32" 221/64" 21/2" 211/16" 31/8" 37/16" 311/16" 41/16" 417/32" 55/16" 63/4" 713/16" 813/16" 109/16" 119/16" 139/16" 149/16" 169/16" 2011/16" 2311/16" Not Included) (50.8) 3/4" (19) (54.8) 3/4" (19) (59.1) 3/4" (19) (63.5) 3/4" (19) (68.3) 3/4" (19) (79.4) 11/2" (40) (87.3) 11/2" 11/2" 21/2" 21/2" 21/2" 21/2" 21/2" 21/2" 3" 3" 4" 4" 4" 4" 4" (40) (93.7) (103.2) (115.1) (134.9) (171.4) (198.4) (223.8) (268.3) (293.7) (344.5) (369.9) (420.7) (525.5) (601.7) (40) (65) (65) (65) (65) (65) (65) (80) (80) (100) (100) (100) (100) (100) Wt./C Lbs. kg 107 117 149 166 186 251 316 317 586 621 895 1115 1423 1846 2593 2825 4843 5225 6970 8587 9977 (48.5) (53.1) (67.6) (75.3) (84.4) (113.8) (143.3) (143.8) (265.8) (281.7) (406.0) (505.7) (645.5) (837.3) (1176.2) (1281.4) (2196.8) (2370.0) (3161.6) (3895.0) (4525.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 97 Supports, Guides, Shields & Saddles Note: 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3090DI - size. 3” (80) Ductile Iron uses B3090-31/2 Pipe Supports, Guides, Shields & Saddles Material: Steel Standard Finish: Plain or Electro-Plated Service: Designed for support of horizontal pipe from floor. Use with B3088 or B3088S Base Stands. 'E' 'C' Steel Size Ordering: Specify part number and finish. 'A' Shank Length Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 37 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 36. 'B' Shank Dia. Gussets on sizes B3095-8 and larger. 'A' 'B' 'C' Center of pipe to bottom lip of support. Shank will fit into Schedule 40 pipe size 'D'. Figure B3095 Pipe Saddle Support Part No. Nominal Pipe Size Maximum O.D. of Pipe Steel Size 'A' 1" (25) 15/16" (33.3) 1/4" x 13/4" (6.3 x 44.4) 3" (76.2) B3095-11/4 11/4" (32) 111/16" (42.9) 1/4" x 13/4" (6.3 x 44.4) 3" (76.2) B3095-11/2 11/2" (40) 129/32" (48.4) 1/4" x 13/4" (6.3 x 44.4) 3" (76.2) 2" (50) 23/8" (60.3) 1/4" x 13/4" (6.3 x 44.4) 3" (76.2) 21/2" (65) 27/8" 3" (80) 31/2" B3095-1 B3095-2 B3095-21/2 B3095-3 B3095-31/2 B3095-4 (73.0) 1/4" x 3" (6.3 x 76.2) 4" (101.6) (88.9) 1/4" x 3" (6.3 x 76.2) 4" (101.6) 31/2" (90) 4" (101.6) 1/4" x 3" (6.3 x 76.2) 4" (101.6) 4" (100) 47/8" (123.8) 1/4" x 4" (6.3 x 101.6) 4" (101.6) (141.3) 1/4" x 4" (6.3 x 101.6) 4" (101.6) (177.8) 3/8" x 4" (9.5 x 101.6) 4" (101.6) B3095-5 5" (125) 59/16" B3095-6 6" (150) 7" (231.8) 3/8" x 4" (9.5 x 101.6) 4" (101.6) (282.6) 3/8" x 4" (9.5 x 101.6) 4" (101.6) B3095-8 8" (200) 91/8" B3095-10 10" (250) 111/8" (342.9) 3/8" x 4" (9.5 x 101.6) 4" (101.6) (355.6) 3/8" x 5" (9.5 x 127.0) 4" (101.6) B3095-12 12" (300) 131/2" B3095-14 14" (350) 14" B3095-16 16" (400) 16" (406.4) 3/8" x 5" (9.5 x 127.0) 4" (101.6) B3095-18 18" (450) 18" (457.2) 1/2" x 5" (12.7 x 127.0) 4" (101.6) x 5" (12.7 x 127.0) 4" (101.6) x 6" 1" x 6" 1" x 6" (12.7 x 127.0) 4" 4" 4" (101.6) B3095-20 20" (500) 20" (508.0) 1/2" B3095-24 B3095-30 B3095-36 24" 30" 36" (600) 24" 30" 36" (609.6) 1/2" (750) (900) (762.0) (914.4) (25.4 x 152.4) (25.4 x 152.4) (101.6) (101.6) Note: 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3095DI - size. 3” (80) Ductile Iron uses B3095-31/2 Supports, Guides, Shields & Saddles All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 98 Pipe Supports, Guides, Shields & Saddles 'E' 'C' Steel Size 'A' Shank Length 'B' Shank Dia. Gussets on sizes B3095-8 and larger. 'A' 'B' 'C' Center of pipe to bottom lip of support. Shank will fit into Schedule 40 pipe size 'D'. Figure B3095 Pipe Saddle Support (cont.) ‘D’ (Base Stand Part No. 'B' B3095-1 1/2" B3095-11/4 3/4" B3095-11/2 B3095-2 'C' (12.7) 129/32" (19.0) 25/64" 3/4" 3/4" Wt./C 'E' Not Included) (48.4) 3/4" (52.8) 3/4" (19.0) 21/4" (19.0) 27/16" B3095-21/2 15/16" (33.3) 29/16" B3095-3 15/16" (33.3) B3095-31/2 Lbs. kg (20) 11/8" (31.7) 49 (22.2) (20) 17/16" (36.5) 81 (36.7) (57.1) 3/4" (20) 121/32" (42.0) 88 (39.9) (61.9) 3/4" (20) 21/16" (52.4) 94 (42.6) (66.1) 11/2" (40) 21/2" (63.5) 167 (75.7) 27/8" (73.0) 11/2" (40) 31/32" (77.0) 176 (79.8) 15/16" (33.3) 31/8" (79.4) 11/2" (40) 37/16" (87.3) 188 (85.3) B3095-4 23/8" 31/2" (88.9) 21/2" (65) 41/4" (107.9) 364 (165.1) B3095-5 23/8" (60.3) 41/32" (102.4) 21/2" (65) 413/16" (122.2) 381 (172.8) B3095-6 23/8" 411/16" (119.1) 21/2" (65) 61/16" (154.0) 534 (242.2) B3095-8 23/8" (60.3) 61/2" (165.1) 21/2" (65) 715/16" (201.6) 796 (361.0) B3095-10 23/8" (60.3) 79/16" (192.1) 21/2" (65) (244.5) 914 (414.6) B3095-12 23/8" (60.3) 83/8" (212.7) 21/2" (65) 1111/16" (296.9) 1068 (484.4) B3095-14 27/8" 103/4" (273.0) 3" B3095-16 27/8" (73.0) 113/4" (298.4) 3" B3095-18 31/2" 131/2" (342.9) 4" B3095-20 31/2" (88.9) 141/2" (368.3) 4" B3095-24 31/2" 173/4" (450.8) B3095-30 31/2" (88.9) 207/8" (530.2) B3095-36 31/2" 237/8" (60.3) (60.3) (73.0) (88.9) (88.9) (88.9) (606.4) 95/8" (80) 121/8" (308.0) 1654 (750.2) (80) 137/8" (352.4) 1817 (824.2) (100) 1519/32" (396.1) 2798 (1269.2) (100) 175/16" (439.7) 3018 (1368.9) 4" (100) 2025/32" (527.8) 4146 (1880.6) 4" (100) 26" (660.4) 7624 (3458.2) (100) 313/16" (792.2) 8877 (4026.6) 4" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 99 Supports, Guides, Shields & Saddles Note: 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3095DI - size. 3” (80) Ductile Iron uses B3095-31/2 Pipe Supports, Guides, Shields & Saddles Material: Steel Standard Finish: Plain or Electro-Plated Service: Designed for support of horizontal pipe from floor where vertical adjustment is required. U-Bolt and Hex Nuts are provided to hold pipe securely to the saddle. Use with B3088T Threaded Base Stand. Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 38 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 37. 'E' U-Bolt Dia. 'C' Steel Size 'B' Gussets on sizes B3092-8 and larger. 'A' 'A' Schedule 40 Pipe Size 'B' Center of pipe to bottom of pipe reducer. 'D' Note: 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3092DI - size. 3” (80) Ductile Iron uses B3092-31/2 'C' Center of pipe to bottom lip of support. 'D' Nominal pipe size of base stand - not included. 'E' U-Bolt Dia. Figure B3092 Adjustable Pipe Saddle Support with Yoke Supports, Guides, Shields & Saddles Part No. B3092-3/4 B3092-1 B3092-11/4 B3092-11/2 B3092-2 B3092-21/2 B3092-3 B3092-31/2 B3092-4 B3092-5 B3092-6 B3092-8 B3092-10 B3092-12 B3092-14 B3092-16 B3092-18 B3092-20 B3092-24 B3092-30 B3092-36 Nominal Pipe Size 3/4" (19) 1" (25) 11/4" (32) 11/2" (38) 2" (50) 1 2 /2" (65) 3" (80) 31/2" (90) 4" (100) 5" (125) 6" (150) 8" (200) 10" (250) 12" (300) 14" (350) 16" (400) 18" (450) 20" (500) 24" (600) 30" (750) 36" (900) Maximum O.D. Pipe 13/8" (34.9) 3 1 /8" (34.9) 111/16" (42.9) 2" (50.8) 27/16" (61.9) 7 2 /8" (73.0) 31/2" (88.9) 4" (101.6) 47/8" (123.8) 5 5 /8" (142.9) 629/32" (175.4) 91/8" (231.8) 113/32" (281.8) 3 13 /16" (334.9) 14" (355.6) 16" (406.4) 18" (457.2) 20" (508.0) 24" (609.6) 30" (762.0) 36" (914.4) 'B' 'A' 3/4" (19) 3/4" (19) 3/4" (19) 3/4" (19) 3/4" (19) 11/2" (40) 11/2" 11/2" 21/2" 21/2" 21/2" 21/2" 21/2" 21/2" 3" 3" 4" 4" 4" 4" 4" (40) (40) (65) (65) (65) (65) (65) (65) (80) (80) (100) (100) (100) (100) (100) Minimum 53/4" (146.0) 29 5 /32" (150.0) 65/64" (154.4) 61/4" (158.7) 67/16" (163.5) 7 6 /8" (174.6) 73/16" (182.6) 77/16" (188.9) 713/16" (198.4) 9 8 /32" (210.3) 91/16" (230.2) 101/2" (266.7) 119/16" (293.7) 9 12 /16" (319.1) 145/16" (363.5) 155/16" (388.9) 175/16" (439.7) 5 18 /16" (465.1) 205/16" (515.9) 247/16" (620.7) 277/16" (696.9) Maximum 101/4" (260.3) 13 10 /32" (264.3) 1037/64" (268.7) 103/4" (273.0) 1015/16" (277.8) 3 11 /8" (288.9) 1111/16" (296.9) 1115/16" (303.2) 125/16" (312.7) 25 12 /32" (324.6) 139/16" (344.5) 15" (381.0) 161/16" (408.0) 1 17 /16" (433.4) 1813/16" (477.8) 1913/16" (503.2) 2113/16" (554.0) 13 22 /16" (579.4) 2413/16" (630.2) 2815/16" (735.0) 3115/16" (811.2) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 100 Pipe Supports, Guides, Shields & Saddles 'A' Schedule 40 Pipe Size 'E' U-Bolt Dia. 'B' Center of pipe to bottom of pipe reducer. 'C' Steel Size 'B' 'C' Center of pipe to bottom lip of support. Gussets on sizes B3092-8 and larger. 'A' 'D' Nominal pipe size of base stand - not included. 'E' U-Bolt Dia. 'D' Figure B3092 Adjustable Pipe Saddle Support with Yoke (cont.) B3092-3/4 B3092-1 B3092-11/4 B3092-11/2 B3092-2 B3092-21/2 B3092-3 B3092-31/2 B3092-4 B3092-5 B3092-6 B3092-8 B3092-10 B3092-12 B3092-14 B3092-16 B3092-18 B3092-20 B3092-24 B3092-30 B3092-36 'C' 2" 25/32" 221/64" 21/2" 211/16" 31/8" 37/16" 311/16" 41/4" 49/16" 51/2" 7" 8" 93/16" 109/16" 119/16" 139/16" 149/16" 169/16" 2011/16" 2311/16" Wt./C 'E' Not Supplied) (50.8) 11/2" (54.8) 11/2" 11/2" 11/2" 11/2" 21/2" 21/2" 21/2" 3" 3" 3" 3" 3" 3" 4" 4" 6" 6" 6" 6" 6" (59.1) (63.5) (68.3) (79.4) (87.3) (93.7) (107.9) (115.9) (139.7) (177.8) (203.2) (233.4) (268.3) (293.7) (344.5) (369.9) (420.7) (525.5) (601.7) Saddle Steel Size (38) 1/4" (6.4) 1/4" (38) 1/4" (6.4) 1/4" (38) 3/8" (9.5) (38) 3/8" (9.5) (38) 3/8" (9.5) (65) 1/2" (12.7) (65) 1/2" (12.7) (65) 1/2" (12.7) (80) 1/2" (12.7) (80) 1/2" (12.7) (80) 5/8" (15.9) (80) 5/8" (15.9) (80) 3/4" (19.0) (80) 7/8" (22.2) (100) 7/8" (22.2) (100) 7/8" (22.2) (150) 1" 1" 1" 1" 1" (25.4) (150) (150) (150) (150) (25.4) (25.4) (25.4) (25.4) 11/2" x x 11/2" 1/4" x 2" 1/4" x 2" 1/4" x 2" 1/4" x 3" 1/4" x 3" 1/4" x 3" 3/8" x 31/2" 3/8" x 31/2" 1/2" x 31/2" 1/2" x 31/2" 1/2" x 31/2" 1/2" x 31/2" 5/8" x 4" 5/8" x 4" 3/4" x 5" 3/4" x 5" 1" x 5" 1" x 5" 1" x 5" (6.3 x 38.1) (6.3 x 38.1) (6.3 x 50.8) (6.3 x 50.8) (6.3 x 50.8) (6.3 x 76.2) (6.3 x 76.2) (6.3 x 76.2) (9.5 x 88.9) (9.5 x 88.9) (12.7 x 88.9) (12.7 x 88.9) (12.7 x 88.9) (12.7 x 88.9) (15.9 x 101.6) (15.9 x 101.6) (19.0 x 127.0) (19.0 x 127.0) (25.4 x 127.0) (25.4 x 127.0) (25.4 x 127.0) Lbs. kg 247 257 289 306 326 651 716 717 1286 1321 1595 1815 2123 2546 3593 3825 7043 7425 9170 10787 12177 (112.0) (116.6) (131.1) (138.8) (147.9) (295.3) (324.8) (325.2) (583.3) (599.2) (723.5) (823.3) (963.0) (1154.8) (1629.8) (1735.0) (3194.7) (3368.0) (4159.5) (4893.0) (5523.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 101 Supports, Guides, Shields & Saddles 'D' (Base Stand Part No. Pipe Supports, Guides, Shields & Saddles 'C' Steel Size 'B' Gussets on sizes B3093-8 and larger. 'A' 'A' Schedule 40 Pipe Size 'B' Center of pipe to bottom of pipe reducer. 'D' Material: Steel Standard Finish: Plain or Electro-Plated Service: Designed for support of horizontal pipe from floor stanchions where vertical adjustment is required. Use with B3088T or B3088ST Threaded Base Stands. Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 39 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 38. 'C' Center of pipe to bottom lip of support. 'D' Nominal pipe size of base stand - not included. Figure B3093 Adjustable Pipe Saddle Support Part No. B3093-1 B3093-11/4 B3093-11/2 B3093-2 B3093-21/2 B3093-3 B3093-31/2 B3093-4 B3093-5 B3093-6 B3093-8 B3093-10 B3093-12 B3093-14 B3093-16 B3093-18 B3093-20 B3093-24 B3093-30 B3093-36 Nominal Pipe Size 1" 1 1 /4" 11/2" 2" 21/2" 3" 31/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" (25) (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) (750) (900) Maximum O.D. Pipe 15/16" 111/16" 129/32" 23/8" 27/8" 31/2" 4" 47/8" 59/16" 7" 91/8" 111/8" 131/2" 14" 16" 18" 20" 24" 30" 36" 'B' 'A' Minimum (33.3) 3/4" (20) (42.9) 3/4" (20) (48.4) 3/4" (20) (60.3) 3/4" (20) (73.0) 11/2" 11/2" 11/2" 21/2" 21/2" 21/2" 21/2" 21/2" 21/2" 3" 3" 4" 4" 4" 4" 4" (40) (88.9) (101.6) (123.8) (141.3) (177.8) (231.8) (282.6) (342.9) (355.6) (406.4) (457.2) (508.0) (609.6) (762.0) (914.4) (40) (40) (65) (65) (65) (65) (65) (65) (80) (80) (100) (100) (100) (100) (100) 521/32" 553/64" 6" 63/16" 65/16" 65/8" 67/8" 71/4" 725/32" 87/16" 101/4" 115/16" 121/8" 141/2" 151/2" 171/4" 181/4" 211/2" 245/8" 275/8" (143.6) (148.0) (152.4) (157.2) (160.3) (168.3) (174.6) (184.1) (197.6) (214.3) (260.3) (287.3) (308.0) (368.3) (393.7) (438.1) (463.5) (546.1) (625.5) (701.7) Maximum 105/32" (257.9) 1021/64" (2262.3) 101/2" (266.7) 1011/16" (271.5) 1013/16" (274.6) 111/8" (282.6) 113/8" (288.9) 113/4" (298.4) 129/32" (311.9) 1215/16" (328.6) 143/4" (374.6) 1513/16" (401.6) 165/8" (422.3) 19" (482.6) 20" (508.0) 213/4" (552.4) 223/4" (577.8) 26" (660.4) 291/8" (739.8) 321/8" (816.0) 'C' 129/32" 25/64" 21/4" 27/16" 29/16" 27/8" 31/8" 31/2" 41/32" 411/16" 61/2" 79/16" 83/8" 103/4" 113/4" 131/2" 141/2" 173/4" 207/8" 237/8" (48.4) (52.8) (58.1) (61.9) (65.1) (73.0) (79.4) (88.9) (102.4) (119.1) (165.1) (192.1) (212.7) (273.0) (298.4) (342.9) (368.3) (450.8) (530.2) (606.4) Note: 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3093DI - size. 3” (80) Ductile Iron uses B3093-31/2 Supports, Guides, Shields & Saddles All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 102 Pipe Supports, Guides, Shields & Saddles 'C' Steel Size Gussets on sizes B3093-8 and larger. 'A' 'A' Schedule 40 Pipe Size 'B' 'B' Center of pipe to bottom of pipe reducer. 'C' Center of pipe to bottom lip of support. 'D' 'D' Nominal pipe size of base stand - not included. Figure B3093 Adjustable Pipe Saddle Support (cont.) Complete 'D' (Base Stand Part No. B3093-1 B3093-11/4 B3093-11/2 B3093-2 B3093-21/2 B3093-3 B3093-31/2 B3093-4 B3093-5 B3093-6 B3093-8 B3093-10 B3093-12 B3093-14 B3093-16 B3093-18 B3093-20 B3093-24 B3093-30 B3093-36 Saddle Steel Size Not Supplied) 11/2" 11/2" 11/2" 11/2" 21/2" 21/2" 21/2" 3" 3" 3" 3" 3" 3" 4" 4" 6" 6" 6" 6" 6" (40) 1/4" (6.3 x 44.4) (40) 1/4" (6.3 x 44.4) (40) (40) (65) (65) (65) (80) (80) (80) (80) (80) (80) (100) (100) (150) (150) (150) (150) (150) x 13/4" x 13/4" 1/4" x 13/4" 1/4" x 13/4" 1/4" x 3" 1/4" x 3" 1/4" x 3" 1/4" x 4" 1/4" x 4" 3/8" x 4" 3/8" x 4" 3/8" x 4" 3/8" x 4" 3/8" x 5" 3/8" x 5" 1/2" x 5" 1/2" x 5" 1/2" x 6" 1" x 6" 1" x 6" (6.3 x 44.4) (6.3 x 44.4) (6.3 x 76.2) (6.3 x 76.2) (6.3 x 76.2) (6.3 x 101.6) (6.3 x 101.6) (9.5 x 101.6) (9.5 x 101.6) (9.5 x 101.6) (9.5 x 101.6) (9.5 x 127.0) (9.5 x 127.0) (12.7 x 127.0) (12.7 x 127.0) (12.7 x 152.4) (25.4 x 152.4) (25.4 x 152.4) Wt./C Saddle Only Lbs. kg Lbs. kg 189 221 228 234 567 576 588 1064 1081 1234 1496 1614 1768 2654 2817 4998 5218 6346 9824 11077 (85.7) 49 81 88 94 167 176 188 364 381 534 796 914 1068 1654 1817 2798 3018 4146 7624 8877 (22.2) (100.2) (103.4) (106.1) (257.2) (261.3) (266.7) (482.6) (490.3) (559.7) (678.6) (732.1) (801.9) (1203.8) (1277.8) (2267.1) (2366.8) (2878.5) (4456.1) (5024.4) (36.7) (39.9) (42.6) (75.8) (79.9) (85.3) (165.1) (172.8) (242.2) (361.1) (414.6) (484.4) (750.2) (824.2) (1269.1) (1368.9) (1880.6) (3458.2) (4026.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 103 Supports, Guides, Shields & Saddles Note: 4" (100) thru 12" (300) fits both steel and ductile iron pipe. For other ductile iron pipe sizes specify B3093DI - size. 3” (80) Ductile Iron uses B3093-31/2 Pipe Supports, Guides, Shields & Saddles Material: Steel 'X' Standard Finish: Black Primer Service: Designed for use in directing thermal expansion of insulated or non-insulated pipe in the direction permitted by expansion joints or loops. The use of two or more guides on both sides of an expansion joint or loop is recommended. Pipe lines should be supported with hangers or rollers so that when properly installed, the guides will not be supporting any pipe loads. Maximum operating temperature should not exceed 750oF (399°C). 'T' Overall Height 'R' Center of pipe to bottom of legs. 'W' Overall Width 'T' 'U' 'V' 'R' Ordering: Specify part number and finish. For use with copper tubing, add CT suffix to the part number. 'S' Dia. 4 Holes Figure B3281 thru B3287 Pipe Alignment Guide Body Size 'R' 001 31/2" 002 4" 'S' (88.9) 5/8" (101.6) 5/8" 003 43/8" 004 51/4" 'T' (15.9) 57/8" (15.9) 63/4" (111.1) 5/8" (133.3) 5/8" 005 61/4" 006 7" 'U' (149.2) 41/8" (171.4) 43/8" (15.9) 75/8" (15.9) 91/4" (158.7) 5/8" (15.9) 115/8" (295.3) (177.8) 5/8" (15.9) 133/8" (339.7) 007 77/8" (200.0) 3/4" (19.0) 151/8" 008 87/8" (225.4) 3/4" (19.0) 17" 009 93/4" (247.6) 3/4" 010 107/8" (276.2) 3/4" 011 121/8" (308.0) 7/8" 'V' (104.8) 13/4" (44.4) (111.1) 13/4" (44.4) (193.7) 51/8" (130.2) 13/4" (44.4) (234.9) 61/8" (155.6) 13/4" (44.4) 7" (177.8) 23/4" (69.8) 81/4" (209.5) 23/4" (69.8) (384.2) 97/8" (250.8) 4" (101.6) (431.8) 107/8" (276.2) 4" (101.6) (19.0) 183/4" (476.2) 117/8" (301.6) 4" (101.6) (19.0) 21" (533.4) 113/4" (298.4) 6" (152.4) (22.2) 231/8" (587.4) 141/2" (368.3) 6" (152.4) 012 13" (330.2) 7/8" (22.2) 25" (635.0) 151/2" (393.7) 6" (152.4) 013 143/4" (374.6) 11/8" (28.6) 273/4" (704.8) 171/8" (435.0) 6" (152.4) 014 161/2" (419.1) 11/8" (28.6) 311/2" (800.1) 191/4" (488.9) 6" (152.4) Body Size Wt./C 'W' 'X' Lbs. kg Supports, Guides, Shields & Saddles 001 61/8" (155.6) 3" (76.2) 700 (317.5) 002 71/8" (181.0) 3" (76.2) 800 (362.9) 003 81/8" (206.4) 3" (76.2) 900 (408.2) 004 101/8" (257.2) 3" (76.2) 1100 (498.9) 005 121/8" (308.0) 4" (101.6) 1700 (771.1) 006 141/8" (358.8) 4" (101.6) 2000 (907.2) 007 161/8" (409.6) 6" (152.4) 4000 (1814.4) 008 181/8" (460.4) 6" (152.4) 4800 (2177.3) 009 201/8" (511.2) 6" (152.4) 5400 (2449.4) 010 221/8" (562.0) 8" (203.2) 6100 (2766.9) 011 241/8" (612.8) 8" (203.2) 8900 (4037.0) 012 261/8" (663.6) 8" (203.2) 10200 (4626.7) 013 281/8" (714.4) 8" (203.2) 11000 (4989.6) 014 321/8" (816.0) 8" (203.2) 15000 (6804.0) Note: CT sizes have lead shims between the steel clamp and the copper tubing. Guides with greater allowable movement available, Contact B-Line Engineering for more information. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 104 Pipe Supports, Guides, Shields & Saddles Figure B3281 thru B3287 Pipe Alignment Guide (Continued) Insulation Thickness Nominal Pipe Size 1/2" (15) 3/4" (20) 1" 11/4" 11/2" 2" 21/2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" (25) (32) (40) (50) (65) (80) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) Part No. 1" (25.4) BS* SAM** B3281-1/2 B3281-3/4 B3281-1 B3281-11/4 B3281-11/2 B3281-2 B3281-21/2 B3281-3 B3281-4 B3281-5 B3281-6 B3281-8 B3281-10 B3281-12 B3281-14 B3281-16 B3281-18 B3281-20 B3281-24 001 001 001 001 002 002 003 003 004 005 005 006 008 009 010 011 012 013 014 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 6" 6" 6" 8" 8" 8" 8" 11/2" (38.1) Part No. BS* SAM** (101.6) B3281-1/2 (101.6) B3282-3/4 (101.6) B3282-1 (101.6) B3282-11/4 (101.6) B3281-11/2 (101.6) B3282-2 (101.6) B3281-21/2 (101.6) B3282-3 (101.6) B3281-4 (101.6) B3281-5 (101.6) B3281-6 (101.6) B3281-8 (152.4) B3281-10 (152.4) B3281-12 (152.4) B3281-14 (203.2) B3281-16 (203.2) B3281-18 (203.2) B3281-20 (203.2) B3281-24 001 002 002 002 002 003 003 004 004 005 005 006 008 009 010 011 012 013 014 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 6" 6" 6" 8" 8" 8" 8" 2" (50.8) BS* SAM** Part No. (101.6) B3283-1/2 (101.6) B3283-3/4 (101.6) B3283-1 (101.6) B3283-11/4 (101.6) B3283-11/2 (101.6) B3283-2 (101.6) B3283-21/2 ((101.6) B3283-3 (101.6) B3283-4 (101.6) B3281-5 (101.6) B3283-6 (101.6) B3283-8 (152.4) B3281-10 (152.4) B3281-12 (152.4) B3281-14 (203.2) B3281-16 (203.2) B3281-18 (203.2) B3281-20 (203.2) B3281-24 002 003 003 003 003 004 004 004 005 005 006 007 008 009 010 011 012 013 014 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 6" 6" 6" 6" 8" 8" 8" 8" 21/2" (63.5) Part No. BS* SAM** (101.6) B3284-1/2 (101.6) B3284-3/4 (101.6) B3284-1 (101.6) B3284-11/4 (101.6) B3284-11/2 (101.6) B3283-2 (101.6) B3283-21/2 (101.6) B3284-3 (101.6) B3284-4 (101.6) B3284-5 (101.6) B3283-6 (152.4) B3284-8 (152.4) B3284-10 (152.4) B3284-12 (152.4) B3281-14 (203.2) B3281-16 (203.2) B3281-18 (203.2) B3281-20 (203.2) B3281-24 003 004 004 004 004 004 004 005 005 006 006 008 009 010 010 011 012 013 014 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" 6" 6" 6" 6" 8" 8" 8" 8" (101.6) (101.6) (101.6) (101.6) (101.6) (101.6) (101.6) (101.6) (101.6) (101.6) (101.6) (152.4) (152.4) (152.4) (152.4) (203.2) (203.2) (203.2) (203.2) Insulation Thickness 1/2" (15) 3/4" (20) 1" 11/4" 11/2" 2" 21/2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" (25) (32) (40) (50) (65) (80) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) Part No. 3" (76.2) BS* SAM** B3285-1/2 B3284-3/4 B3284-1 B3284-11/4 B3284-11/2 B3285-2 B3285-21/2 B3284-3 B3285-4 B3284-5 B3285-6 B3284-8 B3284-10 B3284-12 B3285-14 B3285-16 B3285-18 B3285-20 --- 004 4" 004 4" 004 4" 004 4" 004 4" 005 4" 005 4" 005 4" 006 4" 006 4" 007 6" 008 6" 009 6" 010 6" 011 8" 012 8" 013 8" 014 8" --- --- 31/2" (88.9) Part No. BS* SAM** (101.6) B3285-1/2 004 (101.6) B3286-3/4 (101.6) B3286-1 (101.6) B3286-11/4 (101.6) B3286-11/2 (101.6) B3285-2 (101.6) B3285-21/2 (101.6) B3286-3 (101.6) B3285-4 (101.6) B3286-5 (152.4) B3286-6 (152.4) B3286-8 (152.4) B3286-10 (152.4) B3286-12 (203.2) B3285-14 (203.2) B3285-16 (203.2) B3285-18 (203.2) B3285-20 --- --- 005 005 005 005 005 005 006 006 007 008 009 010 011 011 012 013 014 --- 4" 4" 4" 4" 4" 4" 4" 4" 4" 6" 6" 6" 6" 6" 8" 8" 8" 8" --- Part No. 4" (101.6) BS* SAM** (101.6) B3287-1/2 (101.6) B3286-3/4 (101.6) B3286-1 (101.6) B3286-11/4 (101.6) B3286-11/2 (101.6) B3287-2 (101.6) B3287-21/2 (101.6) B3286-3 (101.6) B3287-4 (152.4) B3287-5 (152.4) B3286-6 (152.4) B3286-8 (152.4) B3286-10 (152.4) B3286-12 (203.2) B3287-14 (203.2) B3287-16 (203.2) B3287-18 (203.2) B3285-20 --- --- 005 005 005 005 005 006 006 006 007 008 008 009 010 011 012 013 014 014 --- 4" 4" 4" 4" 4" 4" 4" 4" 6" 6" 6" 6" 6" 6" 8" 8" 8" 8" --- (101.6) (101.6) (101.6) (101.6) (101.6) BS* = Body Size SAM** = Standard Allowable Movement (101.6) (101.6) (101.6) (152.4) (152.4) Note: Use 1” (25.4mm) insulation thickness column when no insulation is present. (152.4) (152.4) (152.4) (152.4) (203.2) (203.2) (203.2) (203.2) --- Installation: Attach outer housing of the first pipe guide to the structure a maximum of four pipe diameters from an expansion joint. The second pipe guide should be located a maximum of 14 pipe diameters from the first pipe guide. The spider pipe clamp should be offset at a minimum of half the distance in the opposite direction of the axial expansion. See chart for Standard Allowable Movement (SAM). All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 105 Supports, Guides, Shields & Saddles Nominal Pipe Size Pipe Supports, Guides, Shields & Saddles Material: Steel Standard Finish: Electro-Plated Service: Designed as a guide to permit longitudinal movement of pipe. Ordering: Specify part number and finish. (Includes guide and pipe clamp). Clearance Figure B2417 Strut Mounted Pipe Guide Minimum Part No. Pipe Size B2417-1/2 1/2" B2417-3/4 B2417-1 B2417-11/4 B2417-11/2 B2417-2 B2417-21/2 B2417-3 B2417-31/2 B2417-4 3/4" 1" 1 1 /4" 11/2" 2" 1 2 /2" 3" 31/2" 4" Radial Clearance (15) 1/16" (1.6) (20) 1/16" (1.6) (25) 3/32" (2.3) (32) 3/32" (2.3) (40) 3/32" (2.3) (50) 1/8" (3.2) (65) 1/8" (3.2) (80) 5/32" (3.9) (90) 5/32" (3.9) (100) 5/32" (3.9) Includes Clamp No. Lbs. Wt./C kg B2009 B2010 B2034 B2037 B2039 B2043 B2047 B2016 B2017 B2018 22 25 30 47 51 62 69 108 118 128 (10.0) (11.3) Note: Strut Mounted Pipe Guides are available for copper tubing: B2417CT-Size (13.6) (21.8) (23.1) (28.1) (31.3) (49.0) (53.5) (58.0) Material: Steel 'D' Dia. Standard Finish: Plain or Electro-Plated Chair Stock Size Service: Designed for anchoring pipe to structural members. Ordering: Specify part number and finish. 'A' Type A 'C' 'B' Center of pipe to bottom of base plate. 'D' Dia. 'F' Dia. 2 Holes 'E' Chair Stock Size Supports, Guides, Shields & Saddles Figure B3147A & B3147B Pipe Anchor 'A' (dimensional charts on page 107) 'C' Type B All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 106 Pipe Supports, Guides, Shields & Saddles Figure B3147A & B3147B Pipe Anchor Nominal Pipe Size B3147A-1/2 1/2" B3147A-3/4 B3147A-1 B3147A-11/4 B3147A-11/2 B3147A-2 B3147B-21/2 B3147B-3 B3147B-31/2 B3147B-4 B3147B-5 B3147B-6 B3147B-8 B3147B-10 B3147B-12 B3147B-14 B3147B-16 B3147B-18 B3147B-20 B3147B-24 3/4" 1" 1 1 /4" 11/2" 2" 1 2 /2" 3" 31/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" (25) Part No. B3147A-1/2 B3147A-3/4 B3147A-1 B3147A-11/4 B3147A-11/2 B3147A-2 B3147B-21/2 B3147B-3 B3147B-31/2 B3147B-4 B3147B-5 B3147B-6 B3147B-8 B3147B-10 B3147B-12 B3147B-14 B3147B-16 B3147B-18 B3147B-20 B3147B-24 'A' (15) 23/8" (20) 25/8" 27/8" 31/8" 37/8" 41/4" 23/4" 31/4" 33/4" 4" 4" 5" 7" 8" 9" 10" 10" 11" 11" 12" (32) (40) (50) (65) (80) (90) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) 'D' 'B' (60.3) 13/16" (66.7) 1" 13/16" 15/16" 13/8" 15/8" 23/16" 27/16" 25/8" 215/16" 39/16" 315/16" 51/2" 61/2" 71/2" 81/16" 91/8" 101/8" 111/8" 131/8" (73.0) (79.4) (98.4) (107.9) (69.8) (82.5) (95.2) (101.6) (101.6) (127.0) (177.8) (203.2) (228.6) (254.0) (254.0) (279.4) (279.4) (304.8) 'E' 1/4" (6.3) 1/4" (6.3) 1/4" (6.3) 3/8" (9.5) 3/8" (9.5) 3/8" (9.5) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 1/2" (12.7) 5/8" (15.9) 5/8" (15.9) 3/4" (19.0) 7/8" (22.2) 7/8" (22.2) 7/8" (22.2) 1" 1" 1" (25.4) (25.4) (25.4) ------11/4" 13/4" 21/4" 21/4" 21/4" 3" 41/2" 51/2" 6" 7" 7" 7" 7" 8" (31.7) (44.4) (57.1) (57.1) (57.1) (76.2) (114.3) (139.7) (152.4) (177.8) (177.8) (177.8) (177.8) (203.2) ------9/16" 9/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" 13/16" (20.6) (30.2) (25.4) 13/8" 15/8" 21/16" 23/8" 213/16" 37/16" 41/16" 49/16" 51/16" 65/32" 73/8" 93/8" 115/8" 133/4" 15" 17" 191/8" 211/8" 251/8" (34.9) (30.2) (33.3) (34.9) (41.3) (55.6) (61.9) (66.7) (74.6) (90.5) (100.0) (139.7) (165.1) (190.5) (204.8) (231.8) (257.2) (282.6) (333.4) Chair Stock Size 'F' ------- 'C' 13/16" ------(14.3) C3 x 4.1 Channel (14.3) (20.6) (20.6) (20.6) (20.6) (20.6) (20.6) (20.6) (20.6) (20.6) (20.6) (20.6) (20.6) MC4 x 13.8 Channel (41.3) (52.4) Type A (60.3) (71.4) (87.2) (103.2) (115.9) (128.6) (156.3) (187.3) (238.1) Type B (295.3) (349.2) (381.0) (431.8) (485.8) (536.6) (638.2) Wt./C Lbs. kg 72 82 99 109 130 140 147 163 181 198 210 331 793 1096 1419 1555 1643 2286 2401 2713 (32.6) (37.2) (44.9) Type A (49.4) (58.9) (63.5) (66.7) (73.9) (82.1) (89.8) (95.2) (150.1) (359.7) Type B (497.1) (643.6) (705.3) (745.2) (1036.9) (1089.1) (1230.6) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 107 Supports, Guides, Shields & Saddles Part No. Pipe Supports, Guides, Shields & Saddles Material: Steel 'H' 2 Holes Steel Size Steel Size Service: Designed to prevent longitudinal or lateral movement of pipe where pipe is anchored to concrete piers or other supporting structures. 'R' 'R' 'E' 'C' 'A' 'B' 'H' 4 Holes 'A' 'C' Standard Finish: Plain or Electro-Plated Ordering: Specify part number and finish. 'B' 'D' 'D' 'D' B3256-10 thru B3256-30 B3256-2 thru B3256-8 Figure B3256 Hold-Down Anchor Clamp Part No. B3256-2 B3256-21/2 B3256-3 B3256-31/2 B3256-4 Nominal Pipe Size 2" 21/2" 'A' (50) 15/16" (65) 13/16" 'B' (23.8) 81/8" (30.2) 85/8" 'C' (206.4) 57/8" (219.1) 63/8" 'D' 'E' (149.2) 11/2" (38.1) - - (161.9) 11/2" (38.1) - - (50) 11/2" (38.1) 91/4" (234.9) 7" (177.8) 11/2" (38.1) - - 31/2" (80) 13/4" (44.4) 93/4" (247.6) 71/2" (190.5) 11/2" (38.1) - - 4" (90) 2" (50.8) 101/4" (260.3) 8" (203.2) 11/2" (38.1) - - (65.1) 115/16" (287.3) 91/16" (230.2) 11/2" (38.1) - - (77.8) 139/16" (346.1) 105/8" (269.9) 3" (76.2) - - 3" B3256-5 5" (100) 29/16" B3256-6 6" (150) 31/16" B3256-8 8" (200) 41/16" (103.2) 153/4" (396.9) 125/8" (320.7) 3" (76.2) - - B3256-10 10" (250) 51/8" (130.2) 183/4" (476.2) 151/4" (387.3) 21/2" (63.5) 1/2" (12.7) B3256-12 12" (300) 61/8" (155.6) 203/4" (527.0) 171/4" (438.1) 21/2" (63.5) 1/2" (12.7) (171.4) 22" (558.8) 181/2" (469.9) 3" (76.2) 1/2" (12.7) (196.8) 24" (609.6) 201/2" (520.7) 3" (76.2) 1/2" (12.7) (571.2) 31/2" (88.9) 1/2" (12.7) (622.3) 31/2" (88.9) 1/2" (12.7) (723.9) 31/2" (88.9) 1/2" (12.7) (876.3) 31/2" (88.9) 1/2" (12.7) B3256-14 14" (350) 63/4" B3256-16 16" (400) 73/4" (222.2) 26" (660.4) 221/2" (247.6) 28" (711.2) 241/2" (812.8) 281/2" (965.2) 341/2" B3256-18 18" (450) 83/4" B3256-20 20" (500) 93/4" (600) 113/4" (750) 143/4" B3256-24 B3256-30 24" 30" (298.4) (374.6) 32" 38" Wt./C Part No. 'H' 'R' Steel Size Lbs. kg Supports, Guides, Shields & Saddles B3256-2 7/8" (22.2) 13/16" (30.2) 3/8" x 3" (9.5 x 76.2) 342 (155.1) B3256-21/2 7/8" (22.2) 17/16" (36.5) 3/8" x 3" (9.5 x 76.2) 386 (175.1) B3256-3 7/8" (22.2) 13/4" (44.4) 3/8" x 3" (9.5 x 76.2) 434 (196.8) B3256-31/2 7/8" (22.2) 2" (50.8) 3/8" x 3" (9.5 x 76.2) 478 (216.8) B3256-4 7/8" (22.2) 21/4" (57.1) 3/8" x 3" (9.5 x 76.2) 518 (234.9) B3256-5 7/8" (22.2) 213/16" (71.4) 3/8" x 3" B3256-6 B3256-8 B3256-10 B3256-12 B3256-14 1" 1" 11/8" 11/8" 11/8" (25.4) (84.1) 1/2" (28.6) 35/16" 45/16" 53/8" 63/8" 7" B3256-16 11/8" (28.6) 8" B3256-18 11/8" (28.6) B3256-20 11/8" (28.6) B3256-24 11/8" (28.6) B3256-30 11/8" (28.6) (25.4) (28.6) (28.6) (9.5 x 76.2) 610 (276.7) (12.7 x 152.4) (12.7 x 254.0) 1961 2397 4155 4789 6421 (889.5) (177.8) x 6" 1/2" x 6" 1/2" x 8" 1/2" x 8" 1/2" x 10" (203.2) 1/2" x 10" (12.7 x 254.0) 7210 (3270.4) 9" (228.6) 1/2" x 12" (12.7 x 304.8) 9509 (4313.3) 10" (254.0) 1/2" x 12" (12.7 x 304.8) 10434 (4732.8) 12" (304.8) 1/2" x 12" (12.7 x 304.8) 12295 (5577.0) 15" (381.0) 1/2" x 12" (12.7 x 304.8) 15082 (6841.2) (109.5) (136.5) (161.9) (12.7 x 152.4) (12.7 x 203.2) (12.7 x 203.2) (1087.3) (1884.7) (2172.3) (2912.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 108 Pipe Supports, Guides, Shields & Saddles 'H' 4 Holes 'B' Steel Size Material: Steel Standard Finish: Plain or Electro-Plated 'A' 'A' Service: Designed as a base plate for B3256 Pipe Anchor. 'C' 'H' 2 Holes 'B' 'E' 'D' Steel Size B3257-2 thru B3257-8 'D' Ordering: Specify part number and finish. 'D' 'C' B3257-10 thru B3257-30 Figure B3257 Base Plate Part No. B3257-2 B3257-21/2 B3257-3 B3257-31/2 B3257-4 B3257-5 Nominal Pipe Size 'A' 'B' 'C' 'D' (50) 81/8" (206.4) 57/8" (149.2) 11/8" (28.6) 11/2" 21/2" (65) 85/8" (219.1) 63/8" (161.9) 11/8" (28.6) 11/2" (38.1) 3" (80) 91/4" (234.9) 7" (177.8) 11/8" (28.6) 11/2" (38.1) 31/2" (90) 93/4" (247.6) 71/2" (190.5) 11/8" (28.6) 11/2" (38.1) 4" (100) 101/4" (260.3) 8" (203.2) 11/8" (28.6) 11/2" (38.1) (125) 115/16" (287.3) 91/16" (230.2) 11/8" (28.6) 11/2" (38.1) (346.1) 105/8" (269.9) 11/2" (38.1) 3" (76.2) (396.9) 125/8" (320.7) 11/2" (38.1) 3" (76.2) (387.3) 13/4" (44.4) 11/2" (38.1) (438.1) 13/4" (44.4) 11/2" (38.1) (44.4) 2" (50.8) 2" 5" (38.1) B3257-6 6" (150) 135/8" B3257-8 8" (200) 155/8" (476.2) 151/4" (527.0) 171/4" (558.8) 181/2" (469.9) 13/4" (520.7) 13/4" (44.4) 2" (50.8) (571.5) 13/4" (44.4) 21/2" (63.5) (44.4) 21/2" (63.5) (44.4) 21/2" (63.5) (44.4) 21/2" (63.5) B3257-10 10" (250) 183/4" B3257-12 12" (300) 203/4" B3257-14 14" (350) 22" B3257-16 16" (400) 24" (609.6) 201/2" B3257-18 18" (450) 26" (660.4) 221/2" (622.3) 13/4" (723.9) 13/4" (876.3) 13/4" B3257-20 20" (500) 28" (711.2) 241/2" B3257-24 24" (600) 32" (812.8) 281/2" (965.2) 341/2" B3257-30 30" (750) 38" Wt./C 'E' 'H' Steel Size Lbs. kg B3257-2 - - 7/8" (22.2) 3/8" x 3" (9.5 x 76.2) 246 (111.6) B3257-21/2 - - 7/8" (22.2) 3/8" x 3" (9.5 x 76.2) 262 (118.8) B3257-3 - - 7/8" (22.2) 3/8" x 3" (9.5 x 76.2) 282 (127.9) (22.2) 3/8" x 3" (9.5 x 76.2) 298 (135.2) (22.2) 3/8" x 3" (9.5 x 76.2) 314 (142.4) B3257-31/2 - - 7/8" B3257-4 - - 7/8" B3257-5 - - 7/8" (22.2) 3/8" x 3" (9.5 x 76.2) 348 (157.8) B3257-6 - - 1" (25.4) 1/2" x 6" (12.7 x 152.4) 1137 (515.7) B3257-8 - - 1" (25.4) 1/2" x 6" (12.7 x 152.4) 1307 (592.8) B3257-10 5" (127.0) 11/8" (28.6) 1/2" x 8" (12.7 x 203.2) 2071 (939.4) (127.0) 11/8" (28.6) 1/2" x 8" (12.7 x 203.2) 2298 (1042.4) (28.6) 1/2" x 8" (12.7 x 254.0) 3064 (1389.8) (28.6) 1/2" x 8" (12.7 x 254.0) 3347 (1518.2) B3257-12 5" B3257-14 6" (152.4) 11/8" B3257-16 6" (152.4) 11/8" (177.8) 11/8" (28.6) 1/2" x 12" (12.7 x 304.8) 4368 (1981.3) (28.6) 1/2" x 12" (12.7 x 304.8) 4709 (2136.0) (28.6) 1/2" x 12" (12.7 x 304.8) 5389 (2444.4) (28.6) 1/2" x 12" (12.7 x 304.8) 6410 (2907.6) B3257-18 7" B3257-20 7" (177.8) 11/8" B3257-24 7" (177.8) 11/8" (177.8) 11/8" B3257-30 7" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 109 Supports, Guides, Shields & Saddles Part No. Pipe Supports, Guides, Shields & Saddles Figure B3891 - B3897 Pipe Slide Assembly Series Material: Tee - Carbon Steel; Facing Plate - Stainless Steel Type 304; Base - Carbon Steel with teflon® slide pads. Finish: Black paint. Service: Designed to support pipe where horizontal movement from expansion and contraction is present. Fits up to 3” insulation thickness. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 35. B3891 - 10 - CL Operating Temperature Rating: 400°F (204°C) maximum Base Style Travel 1 04” (101) (except B3897) 2 10” (254) (except B3897) 3 21/2” (63) (B3897 only) 4 5 6 7 B3891 Options Standard Slide = Blank W/ End Plates = EP - Pipe Size W/ B3140 Clamps = CL - Pipe Size B3892 B3893 Loading: Capable of supporting constant loads up to 2000 Psi at 70°F. B3894 B3895 Notes: B3891, B3892 and B3893 are designed for longitudinal movement only. B3894, B3895 and B3896 are designed for longitudinal and limited transverse movement. B3897 is designed for up to 5 inches (127mm) of horizontal movement in any direction, depending on the installed position. B3896 B3897 Options: Supports, Guides, Shields & Saddles B3140 Clamps End Plates All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 110 Pipe Supports, Guides, Shields & Saddles Figure B3891 - B3897 Pipe Slide Assembly Series Pipe Size Travel Length 'L' Depth 'B' In. In. mm In. mm In. mm 55/16" (134.9) 91/2" (241.3) 5" (127.0) 4" (101.6) B3891 45/8" (117.5) 6" (152.4) 2" (50.8) N/A N/A B3892 51/8" (130.2) 6" (152.4) 4" (101.6) N/A N/A B3893 51/8" (130.2) 6" (152.4) 4" (101.6) N/A N/A B3894 45/8" (117.5) 6" (152.4) 2" (50.8) N/A N/A B3895 51/8" (130.2) 6" (152.4) 4" (101.6) N/A N/A B3896 51/8" (130.2) 6" (152.4) 4" (101.6) N/A N/A B3891 45/8" (117.5) 12" (304.8) 2" (50.8) N/A N/A B3892 51/8" (130.2) 12" (304.8) 4" (101.6) N/A N/A B3893 51/8" (130.2) 12" (304.8) 4" (101.6) N/A N/A B3894 45/8" (117.5) 12" (304.8) 2" (50.8) N/A N/A B3895 51/8" (130.2) 12" (304.8) 4" (101.6) N/A N/A B3896 51/8" (130.2) 12" (304.8) 4" (101.6) N/A N/A mm Part No. 21/2” (63.5) B3897 4" (127.0) 1" to 24" (25 to 600) 10" Pipe Size Height 'H' In. (254.0) Travel mm Width 'P' Width 'W' Diameter 'D' Max Recommended Load In. mm Part No. In. mm In. mm Lbs. kN 21/2” (63.5) B3897 N/A N/A 91/2" (241.3) 16000 (71.2) B3891 4" (101.6) N/A N/A 12000 (53.4) B3892 4" (101.6) 7" (177.8) 12000 (53.4) B3893 4" (101.6) 7" (177.8) 12000 (53.4) B3894 N/A N/A 6" (152.4) 12000 (53.4) B3895 6" (152.4) 10" (254.0) 24000 (106.8) 1" to 24" B3896 6" (152.4) 10" (254.0) 24000 (106.8) (25 to 600) B3891 4" (101.6) N/A N/A 12000 (53.4) B3892 4" (101.6) 7" (177.8) 12000 (53.4) B3893 4" (101.6) 7" (177.8) 12000 (53.4) B3894 N/A N/A 6" (152.4) 12000 (53.4) B3895 6" (152.4) 10" (254.0) 24000 (106.8) B3896 6" (152.4) 10" (254.0) 24000 (106.8) 4" 10" (127.0) (254.0) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 111 Supports, Guides, Shields & Saddles *Based on teflon® of 500 psi. Pipe Supports, Guides, Shields & Saddles Figure B3891 - B3897 Pipe Slide Assembly Series Field weld pipe to tee. Field weld pipe to tee. 'H' 'H' Stainless steel facing plate on tee - filled teflon® on base. Stainless steel facing plate on tee - filled teflon® on base. 'W' 'P' B3894 Front View B3891 Front View 'B' 'L' B3891& B3894 Side View Field weld pipe to tee. Field weld pipe to tee. 'H' 'H' 17/16" 17/16" /2" 1 /16" 1 'P' 'W' /2" 1 1" /16" 1 'P' 'W' 1" B3895 Front View B3892 Front View Stainless steel facing plate on tee - filled teflon® on base. Supports, Guides, Shields & Saddles 'B' 'L' B3892 & B3895 Side View Note: All teflon® is 3/32” (2.4mm) thick. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 112 Pipe Supports, Guides, Shields & Saddles Figure B3891 - B3897 Pipe Slide Assembly Series Field weld pipe to tee. Field weld pipe to tee. 'H' 'H' /2" /2" 1 1 17/16" 17/16" /2" 1 /2" 1 /16" 1 /16" 'P' 'W' 1 'P' 'W' 1" B3893 Front View 1" B3896 Front View Stainless steel facing plate on tee - filled teflon® on base. 'B' 'L' B3893 & B3896 Side View Field weld pipe to tee. 'H' Stainless steel facing plate on tee - filled teflon® on disc. 2 /2" 1 'D' 'W' 2 /2" 1 B3897 Front View 21/2" 21/2" 'B' 'L' B3897 Side View All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 113 Supports, Guides, Shields & Saddles Note: All teflon® is 3/32” (2.4mm) thick. Pipe Supports, Guides, Shields & Saddles Figure B3991 - B3991B Pipe Slide Assembly Series Material: Tee & H Slides - Carbon Steel with Heat Cured PTFE modified coating at slide plate. Base - Carbon Steel with teflon® slide pads. Finish: Black paint. Service: Designed to support pipe where horizontal movement from expansion and contraction is present. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 35. Operating Temperature Rating: 400°F (204°C) maximum at base Loading: Capable of supporting constant loads up to 2000 Psi at 70°F (21°C) B3993 - 5 - 04 - CL Base Style 3 3B Pipe Size 5 = 1” (25) - 8” (200) 10 = 10” (250) - 24” (600) Travel 04 = 4” (100) 10 = 10” (250) Options Standard Slide = Blank W/ End Plates = EP - Pipe Size W/ B3140 Clamps = CL - Pipe Size T-Slide B3993-5 B3993B-5 H-Slide B3993-10 B3993B-10 Options: Supports, Guides, Shields & Saddles CL (standard slide with B3140 clamps) EP (standard slide with end plates) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 114 Pipe Supports, Guides, Shields & Saddles Figure B3991 - B3993B Pipe Slide Assembly Series Pipe Size Travel In. mm Height 'H' Part No. B3991-5 4" B3993-5 (101.6) 1" to 24" B3993B-5 B3991-10 B3993-10 B3993B-10 (25 to 600) B3991-5 10" B3993-5 (254.0) B3993B-5 B3991-10 B3993-10 B3993B-10 Pipe Size Travel In. mm 47/16" In. 47/16" 6" In. (152.4) 3" (112.7) 6" (112.7) 47/8" (123.8) 47/8" (123.8) 47/16" Depth 'B' mm In. 411/16" (119.1) 51/8" Length 'L' mm (130.2) 6" 6" 6" 6" (112.7) 12" 47/8" (123.8) 12" 47/16" (112.7) 411/16" (119.1) 47/8" (123.8) 51/8" (130.2) Width 'P' 12" 12" 12" 12" (152.4) (152.4) (152.4) (152.4) (152.4) (304.8) (304.8) (304.8) (304.8) (304.8) (304.8) Width 'W' 3" 3" mm (76.2) (76.2) (76.2) Width 'C' 81/2" In. N/A 81/2" mm (215.9) N/A (215.9) 4" (101.6) 141/2" (368.3) 3" 81/2" 4" 4" 3" 3" 4" 4" 4" (101.6) N/A (101.6) 141/2" (76.2) (76.2) (76.2) N/A 81/2" N/A (368.3) (215.9) N/A (215.9) (101.6) 141/2" (368.3) (101.6) N/A (101.6) 141/2" N/A (368.3) Max Recommended Load Part No. In. mm In. mm Lbs. kN B3991-5 6" (152.4) N/A N/A 16000 (71.2) B3993-5 2" (50.8) 41/2" (114.3) 12000 (53.4) (114.3) 12000 (53.4) N/A 32000 (142.3) B3993B-5 2" (50.8) 41/2" B3991-10 12" (304.8) N/A B3993-10 6" (152.4) 811/16" (220.7) 24000 (106.8) 1" to 24" B3993B-10 6" (152.4) 811/16" (220.7) 24000 (106.8) (25 to 600) B3991-5 6" (152.4) N/A N/A 16000 (71.2) B3993-5 2" (50.8) 41/2" (114.3) 12000 (53.4) (114.3) 12000 (53.4) N/A 32000 (142.3) 4" 10" (101.6) (254.0) B3993B-5 2" (50.8) 41/2" B3991-10 12" (304.8) N/A B3993-10 6" (152.4) 811/16" (220.7) 24000 (106.8) 6" (152.4) 811/16" (220.7) 24000 (106.8) B3993B-10 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 115 Supports, Guides, Shields & Saddles *Based on teflon® of 2000 psi. Pipe Supports, Guides, Shields & Saddles Figure B3991 Pipe Slide Assembly Series dimensional drawings Pipe to be field welded to T or H slides. See charts on page 121 for ‘H’, ‘L’, ‘B’, ‘C’, ‘P’ & ‘W’ dimensions (14) (14) 'P' 3/4” (19) 'C' 9/16”∅ ∅ 'COP' 9/16”∅ ∅ 'H' 'H' 3/4” 3/4” (19) (19) 'BOP' 3/4” 'P' (19) 'C' B3991-10 Front View B3991-5 Front View Pipe Size In. mm 10” (250) 12” 14” B3991-5 (shown) & B3991-10 Side View 'B' mm ‘COP’ In. mm 41/8" (104.8) 91/2" (241.3) (300) 41/4" (107.9) 105/8" (269.9) (350) 43/8" (111.1) 113/8" (288.9) (111.1) 123/8" (314.3) 16” (400) 43/8" 18" (450) 43/8" (111.1) 133/8" (339.7) 20” (500) 41/2" (114.3) 141/2" (368.3) (600) 45/8" 165/8" (422.3) 24” 'L' ‘BOP‘ In. (117.5) Figure B3993 Pipe Slide Assembly Series dimensional drawings Pipe to be field welded to T or H slides. See charts on page 121 for ‘H’, ‘L’, ‘B’, ‘C’, ‘P’ & ‘W’ dimensions 'COP' 'H' 'H' 'BOP' 'P' 'W' 'P' 'W' B3993-5 Front View B3993-10 Front View Pipe Size In. Supports, Guides, Shields & Saddles B3993-5 (shown) & B3993-10 Side View 'B' 'L' ‘BOP‘ ‘COP’ mm In. 10” (250) 41/8" 12” (300) 41/4" (107.9) 105/8" (269.9) 14” (350) 43/8" (111.1) 113/8" 16” (400) 43/8" (111.1) 123/8" (314.3) 18" (450) 43/8" (111.1) 133/8" (339.7) 20” (500) 41/2" (114.3) 141/2" (368.3) (600) 45/8" 165/8" (422.3) 24” mm In. mm (104.8) 91/2" (241.3) (117.5) (288.9) Note: All teflon® is 3/32” (2.4mm) thick. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 116 Pipe Supports, Guides, Shields & Saddles Figure B3993B Pipe Slide Assembly Series dimensional drawings Pipe to be field welded to T or H slides. See charts on page 121 for ‘H’, ‘L’, ‘B’, ‘C’, ‘P’ & ‘W’ dimensions 'COP' 'H' 'H' 'BOP' 9/16” ∅ 9/16”∅ ∅ (14) (19) 'P' 'W' 'C' (14) 3/4” 3/4” (19) (19) 'P' 'W' 'C' (19) B3993B-10 Front View B3993B-5 Front View Pipe Size In. B3993B-5 (shown) & B3993B-10 Side View 3/4” 'B' 'L' ‘BOP‘ ‘COP’ mm In. 10” (250) 43/8" 12” (300) 41/2" (114.3) 107/8" (276.2) 14” (350) 45/8" (117.5) 115/8" 16” (400) 45/8" (117.5) 125/8" (320.7) 18" (450) 45/8" (117.5) 135/8" (346.1) 20” (500) 43/4" (120.6) 143/4" (374.6) (600) 47/8" 167/8" (428.6) 24” mm In. mm (111.1) 93/4" (247.6) (123.8) (295.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 117 Supports, Guides, Shields & Saddles 3/4” Pipe Supports, Guides, Shields & Saddles Material: Carbon Steel; Stainless Steel available Standard Finish: Plain or Electro-Plated Service: Designed to protect pipe insulation on high temperature pipe lines. Saddles are 12" (304.8) long. Center rib is furnished on all saddle sizes 12" (300) and above. Ordering: Specify part number and finish. Select Part Number by insulation thickness and add nominal pipe size (Ex: B3161-11/4 PLN). 12" (304.8) Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 40A and Type 40B and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 39A and Type 39B. Sizes 3/4" (20) thru 10" (250) Insulation Thickness 1" 11/2" 2" 21/2" 3" 4" 12" (304.8) Sizes 12" (300) and larger Part Number B3160 B3161 B3162 B3163 B3164 B3165 (25.4) (38.1) (50.8) (63.5) (76.2) (101.6) Pipe Covering Protection Saddle Size For Roller Part Number B3114 B3120 B3122 B3122A B3117SL B3118SL B3119SL B3124 B3126 B3110 Lbs. kN 2 3 4 21/2 3 4 21/2 31/2 4 5 3 31/2 5 6 2-31/2 2-31/2 2-31/2 2-31/2 2-31/2 2-31/2 2-31/2 2-31/2 2-31/2 4-6 2-31/2 2-31/2 4-6 4-6 21/2 31/2 5 3 4 5 3 5 5 6 31/2 5 6 8 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1800 1800 (5.34) 31/2 4 5 6 8 2-31/2 2-31/2 4-6 4-6 4-6 4 5 6 8 8 1200 1200 1800 1800 1800 (5.34) B3160-21/2 31/2 2-31/2 5 6 8 8 4-6 4-6 4-6 4-6 5 6 8 8 10 1200 1200 1800 1800 1800 (5.34) B3161-21/2 B3162-21/2 B3163-21/2 B3164-21/2 Part No. B3160-3/4 B3161-3/4 B3162-3/4 B3160-1 B3161-1 B3162-1 B3160-11/4 B3161-11/4 B3162-11/4 B3163-11/4 B3160-11/2 B3161-11/2 B3162-11/2 B3163-11/2 B3160-2 B3161-2 B3162-2 B3163-2 B3164-2 Nominal Pipe Size 3/4" 1" 11/4" 11/2" 2" Supports, Guides, Shields & Saddles 21/2" (20) (25) (32) (40) (50) (65) Design Load (5.34) (5.34) (5.34) (5.34) (5.34) (5.34) (5.34) (5.34) (5.34) (5.34) (5.34) (8.00) (8.00) (5.34) (8.00) (8.00) (8.00) (5.34) (8.00) (8.00) (8.00) Wt./C Lbs. 122 228 297 156 228 297 156 228 297 342 172 239 311 417 172 239 311 417 441 210 268 358 417 459 kg (55.3) (103.4) (134.7) (70.7) (103.4) (134.7) (70.7) (103.4) (134.7) (155.1) (78.0) (108.4) (141.0) (189.1) (78.0) (108.4) (141.0) (189.1) (200.0) (95.2) (121.5) (162.4) (189.1) (208.2) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 118 Pipe Supports, Guides, Shields & Saddles 12" 12" (304.8) (304.8) Sizes 12" (300) and larger Sizes 3/4" (20) thru 10" (250) Insulation Thickness 'C' 'A' 'C' 1" 11/2" 2" 21/2" 3" 4" 'B' Part Number B3160 B3161 B3162 B3163 B3164 B3165 (25.4) (38.1) (50.8) (63.5) (76.2) (101.6) Pipe Covering Protection Saddle (Continued) Centerline of Pipe to Centerline of Roll Part No. Nominal Pipe Size B3160-3/4 B3161-3/4 B3114 B3120 B3122 B3122A 3/4" (20) 'B' B3117SL B3118SL B3119SL B3124 B3126 'A' B3110 Centerline of Pipe to Outside of Saddle 'C' Thickness of Covering (Per ASTM C 585) 2" (50.8) 21/4" (57.1) 2" (50.8) 19/16" (39.7) 7/8" (22.2) 27/16" (61.9) 27/8" (73.0) 23/8" (69.8) 23/16" (55.6) 11/2" (38.1) (49.2) B3162-3/4 35/16" (84.1) 37/16" (87.3) 33/8" (85.7) 23/4" (69.8) 115/16" B3160-1 25/16" (58.7) 21/2" (63.5) 25/16" (58.7) 113/16" (46.0) 11/16" (27.0) 27/8" (73.0) 3" (76.2) 27/8" (73.0) 25/16" (58.7) 19/16" (39.7) B3162-1 37/16" (87.3) 35/8" (92.1) 31/2" (88.9) 27/8" (73.0) 21/8" (54.0) B3160-11/4 29/16" (65.1) 211/16" (68.3) 21/2" (63.5) 2" (50.8) 15/16" (23.8) B3161-11/4 31/8" (79.4) 31/4" (82.5) 31/8" (79.4) 29/16" (65.1) 17/16" (36.5) 311/16" (93.7) 313/16" (96.8) 37/16" (87.3) 31/16" (77.8) 21/8" (54.0) B3163-11/4 41/16" (103.2) 41/8" (104.8) 41/16" (103.2) 37/16" (87.3) 27/16" (61.9) B3160-11/2 211/16" (68.3) 27/8" (73.0) 27/16" (61.9) 21/8" (54.0) 11/32" (26.2) B3161-11/2 33/16" (81.0) 35/16" (84.1) 33/16" (81.0) 29/16" (65.1) 117/32" (38.9) 39/16" (90.5) 313/16" (96.8) 313/16" (96.8) 31/8" (79.4) 2" (50.8) B3163-11/2 47/16" (112.7) 43/8" (111.1) 41/2" (114.3) 35/8" (92.1) 227/32" (72.2) B3160-2 215/16" (74.6) 31/8" (79.4) 215/16" (74.6) 23/8" (60.3) 11/16" (27.0) B3161-2 37/16" (87.3) 35/8" (92.1) 31/2" (88.9) 27/8" (73.0) 119/32" (40.5) 41/8" (104.8) 41/8" (104.8) 41/16" (103.2) 37/16" (87.3) 21/8" (54.0) B3163-2 411/16" (119.1) 411/16" (119.1) 43/4" (120.6) 315/16" (100.0) 25/8" (66.7) B3164-2 51/4" (133.3) 53/16" (131.8) 51/4" (133.3) 41/2" (114.3) 31/8" (79.4) B3160-21/2 31/4" (82.5) 33/8" (85.7) 31/4" (82.5) 25/8" (66.7) 11/16" (27.0) B3161-21/2 37/8" (98.4) 315/16" (100.0) 37/8" (98.4) 31/4" (82.5) 17/8" (47.6) 49/16" (115.9) 49/16" (115.9) 45/8" (117.5) 37/8" (98.4)) 25/16" (58.7) B3163-21/2 51/8" (130.2) 5" (127.0) 51/8" (130.2) 41/4" (107.9) 27/8" (73.0) B3164-21/2 57/16" (138.1) 55/16" (134.9) 51/2" (139.7) 49/16" (115.9) 31/16" (77.8) B3161-1 B3162-11/4 B3162-11/2 B3162-2 B3162-21/2 1" 11/4" 11/2" 2" 21/2" (25) (32) (40) (50) (65) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 119 Supports, Guides, Shields & Saddles 'A' Pipe Supports, Guides, Shields & Saddles Insulation Thickness 1" (25.4) 11/2" (38.1) 2" (50.8) Part Number B3160 B3161 B3162 Insulation Thickness 21/2" (63.5) 3" (76.2) 4" (101.6) Part Number B3163 B3164 B3165 Pipe Covering Protection Saddle (Continued) Size For Roller Part Number Part No. Nominal Pipe Size B3114 B3120 B3122 B3122A B3117SL B3118SL B3119SL B3124 B3126 Design Load Wt./C B3110 Lbs. kN Lbs. kg 4 5 6 8 8 2-31/2 5 6 8 8 10 1800 1800 1800 1800 1800 (8.00) 4-6 4-6 4-6 8-10 (8.00) 210 268 358 417 459 B3160-31/2 5 4-6 6 1200 (5.34) 226 (102.5) B3161-31/2 6 4-6 8 1800 (8.00) 289 (131.1) B3160-3 B3161-3 B3162-3 B3163-3 B3164-3 B3162-31/2 3" 31/2" (80) (8.00) (8.00) (8.00) (95.2) (166.9) (162.4) (189.1) (208.2) 8 4-6 8 1800 (8.00) 364 (165.1) B3163-31/2 8 8-10 10 1800 (8.00) 422 (191.4) B3164-31/2 10 8-10 10 1800 (8.00) 488 (221.3) B3160-4 B3161-4 B3162-4 B3163-4 B3164-4 B3165-4 5 6 8 8 10 10 4-6 4-6 8-10 8-10 8-10 8-10 6 8 8 10 10 12 1800 1800 1800 1800 1800 1800 (8.00) 226 289 364 422 488 616 (102.5) 6 8 8 10 10 12 4-6 4-6 8-10 8-10 8-10 8-10 8 8 10 10 12 14 1800 1800 1800 1800 1800 1800 (8.00) 8 8 10 10 12 14 8-10 8-10 8-10 8-10 8-10 12-14 8 10 10 12 12 16 1800 1800 1800 1800 1800 1800 (8.00) 10 10 10 12 14 16 8-10 8-10 8-10 8-10 12-14 12-14 12 12 12 14 16 18 1800 1800 1800 1800 1800 1800 (8.00) 12 12 14 14 16 18 12-14 12-14 16-20 16-20 16-20 16-20 14 14 16 16 18 20 1800 1800 1800 1800 1800 1800 (8.00) B3160-5 B3161-5 B3162-5 B3163-5 B3164-5 B3165-5 B3160-6 B3161-6 B3162-6 B3163-6 B3164-6 B3165-6 B3160-8 B3161-8 B3162-8 B3163-8 B3164-8 B3165-8 Supports, Guides, Shields & Saddles B3160-10 B3161-10 B3162-10 B3163-10 B3164-10 B3165-10 4" 5" 6" 8" 10" (90) (100) (125) (150) (200) (250) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) (8.00) 250 289 364 422 488 643 (131.1) (165.1) (191.4) (221.3) (279.4) (113.4) (131.1) (165.1) (191.4) (221.3) (291.6) 387 498 594 694 794 1009 (175.5) 478 554 674 782 893 1089 (216.8) 546 642 750 850 957 1137 (247.6) (225.9) (269.4) (314.8) (360.1) (457.7) (251.3) (305.7) (354.7) (405.0) (494.0) (291.2) (340.2) (385.5) (434.1) (515.7) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 120 Pipe Supports, Guides, Shields & Saddles Insulation Thickness 1" (25.4) 11/2" (38.1) 2" (50.8) Part Number B3160 B3161 B3162 Insulation Thickness 21/2" (63.5) 3" (76.2) 4" (101.6) Part Number B3163 B3164 B3165 'C' 'A' 'C' 'B' Pipe Covering Protection Saddle (Continued) Centerline of Pipe to Centerline of Roll Part No. B3114 B3120 B3122 B3122A Nominal Pipe Size 'B' B3117SL B3118SL B3119SL B3124 B3126 'A' B3110 Centerline of Pipe to Outside of Saddle 'C' Thickness of Covering (Per ASTM C 585) B3160-3 33/8" (85.7) 31/2" (88.9) 35/8" (91.1) 3" (76.2) 11/32" (26.2) B3161-3 41/4" (107.9) 45/16" (109.5) 41/4" (107.9) 39/16" (90.5) 19/16" (39.7) B3162-3 415/16" (125.4) 415/16" (125.4) 415/16" (125.4) 43/16" (106.4) 21/16" (52.4) B3163-3 57/16" (138.1) 53/8" (136.5) 57/16" (138.1) 45/8" (117.5) 29/16" (65.1) B3164-3 513/16" (147.6) 6" (152.4) 57/8" (149.2) 415/16" (125.4) 31/16" (77.8) B3160-31/2 313/16" (96.8) 37/8" (98.4) 313/16" (96.8) 33/16" (81.0) 11/32" (26.2) B3161-31/2 43/8" (111.1) 43/8" (111.1) 43/8" (111.1) 311/16" (93.7) 19/16" (39.7) 5" (127.0) 5" (127.0) 5" (127.0) 41/4" (107.9) 21/16" (52.4) B3163-31/2 51/2" (139.7) 511/16" (144.5) 59/16" (141.3) 45/8" (117.5) 225/32" (70.6) B3164-31/2 63/16" (157.2) 65/16" (160.3) 63/16" (157.2) 51/4" (133.3) 31/16" (77.8) B3160-4 41/8" (104.8) 41/8" (104.8) 41/8" (104.8) 37/16" (87.3) 11/16" (27.0) B3161-4 411/16" (119.1) 47/16" (112.7) 43/4" (120.6) 4" (101.6) 19/16" (39.7) B3162-4 55/16" (134.9) 51/4" (133.3) 55/16" (134.9) 41/2" (114.3) 21/16" (52.4) 513/16" (147.6) 6" (152.4) 57/8" (149.2) 415/16" (125.4) 29/16" (65.1) B3164-4 67/16" (163.5) 69/16" (166.7) 67/16" (163.5) 51/2" (139.7) 31/8" (79.4) B3165-4 79/16" (192.1) 75/8" (193.7) 79/16" (192.1) 61/2" (165.1) 41/8" (104.8) B3160-5 411/16" (119.1) 411/16" (119.1) 43/4" (120.6) 315/16" (100.0) 11/32" (26.2) B3161-5 55/16" (134.9) 51/4" (133.3) 55/16" (134.9) 49/16" (115.9) 117/32" (38.9) B3162-5 57/8" (149.2) 61/8" (155.6) 6" (152.4) 51/8" (130.2) 21/32" (51.6) 67/16" (163.5) 69/16" (166.7) 67/16" (163.5) 59/16" (141.3) 29/16" (65.1) B3164-5 7" (177.8) 73/16" (182.6) 71/8" (181.0) 61/8" (155.6) 33/32" (78.6) B3165-5 83/16" (208.0) 83/16" (208.0) 83/8" (212.7) 71/16" (179.4) 45/32" (105.5) B3160-6 51/4" (133.3) 51/4" (133.3) 51/4" (133.3) 41/2" (114.3) 1" (25.4) B3161-6 57/8" (149.2) 61/16" (154.0) 515/16" (150.8) 5" (127.0) 11/2" (38.1) B3162-6 61/2" (165.1) 65/8" (168.3) 61/2" (165.1) 59/16" (141.3) 21/16" (52.4) 71/16" (179.4) 71/8" (181.0) 71/8" (181.0) 61/16" (154.0) 29/16" (65.1) B3164-6 75/8" (193.7) 711/16" (195.3) 75/8" (193.7) 69/16" (166.7) 31/16" (77.8) B3165-6 91/16" (230.2) 815/16" (227.0) 9" (228.6) 73/4" (196.8) 43/16" (106.4) B3160-8 61/2" (165.1) 65/8" (168.3) 69/16" (166.7) 59/16" (141.3) 11/32" (26.2) B3161-8 71/16" (179.4) 71/8" (181.0) 71/16" (179.4) 61/16" (154.0) 19/16" (39.7) B3162-8 79/16" (192.1) 75/8" (193.7) 75/8" (193.7) 69/16" (166.7) 21/16" (52.4) 85/16" (211.1) 85/16" (211.1) 81/2" (215.9) 73/16" (182.6) 211/16" (68.3) B3164-8 91/16" (230.2) 815/16" (227.0) 9" (228.6) 73/4" (196.8) 33/16" (81.0) B3165-8 10" (254.0) 915/16" (252.4) 101/16" (255.6) 811/16" (220.7) 43/16" (106.4) B3160-10 711/16" (195.3) 73/4" (196.8) 77/8" (200.0) 65/8" (168.3) 31/32" (24.6) B3161-10 85/16" (211.1) 85/16" (211.1) 87/16" (214.3) 73/16" (182.6) 15/8" (41.3) B3162-10 9" (228.6) 87/8" (225.4) 87/8" (225.4) 711/16" (195.3) 21/8" (54.0) 95/8" (244.5) 97/16" (239.7) 91/2" (241.3) 83/16" (208.0) 25/8" (66.7) B3164-10 101/8" (257.2) 103/16" (258.8) 103/16" (258.8) 83/4" (222.2) 31/8" (79.4) B3165-10 111/4" (285.7) 113/16" (284.2) 111/4" (285.7) 93/4" (247.6) 41/8" (104.8) B3162-31/2 B3163-4 B3163-5 B3163-6 B3163-8 B3163-10 3" 31/2" 4" 5" 6" 8" 10" (80) (90) (100) (125) (150) (200) (250) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 121 Supports, Guides, Shields & Saddles 'A' Pipe Supports, Guides, Shields & Saddles Insulation Thickness 1" (25.4) 11/2" (38.1) 2" (50.8) Part Number B3160 B3161 B3162 Insulation Thickness 21/2" (63.5) 3" (76.2) 4" (101.6) Part Number B3163 B3164 B3165 Pipe Covering Protection Saddle (Continued) Size For Roller Part Number Part No. Nominal Pipe Size B3114 B3117SL B3114 B3118SL B3120, B3122 B3119SL B3122A B3124, B3126 Design Load B3110 Lbs. kN Wt./C Lbs. kg B3160-12 14 12-14 16 5000 (22.24) 688 (312.1) B3161-12 14 12-14 16 5000 (22.24) 836 (379.2) 16 16-20 18 5000 (22.24) 963 (436.8) 16 16-20 18 5000 (22.24) 1091 (494.9) B3164-12 18 16-20 20 5000 (22.24) 1218 (552.5) B3165-12 B3161-14 20 16 16-20 16-20 24 18 5000 5000 (22.24) 1462 828 (663.1) (22.24) B3162-14 16 16-20 18 5000 (22.24) 963 (436.8) 18 16-20 20 5000 (22.24) 1099 (498.5) B3164-14 18 16-20 20 5000 (22.24) 1230 (557.9) B3165-14 B3161-16 20 18 24 16-20 24 20 5000 5000 (22.24) (674.0) (22.24) 1486 907 B3162-16 18 16-20 20 5000 (22.24) 1039 (471.3) B3162-12 B3163-12 B3163-14 12" 14" (350) (375.6) (411.4) 20 16-20 24 7200 (32.02) 1163 (527.5) B3164-16 20 24 24 7200 (32.02) 1298 (588.8) B3165-16 24 24 24 7200 (32.02) 1554 (704.9) B3161-18 20 16-20 24 5000 (22.24) 979 (444.1) 20 24 24 7200 (32.02) 1107 (502.1) 24 24 24 7200 (32.02) 1230 (557.9) B3164-18 24 24 24 7200 (32.02) 1362 (617.8) B3165-18 24 24 - 7200 (32.02) 1617 (733.5) B3161-20 24 24 24 7200 (32.02) 1043 (473.1) B3162-20 24 24 24 7200 (32.02) 1171 (531.1) B3163-16 16" (300) (400) B3162-18 B3163-18 18" 24 24 - 7200 (32.02) 1294 (586.9) B3164-20 24 24 - 7200 (32.02) 1430 (648.6) B3165-20 30 30 - 7200 (32.02) 1689 (766.1) B3161-24 30 30 - 7200 (32.02) 1179 (534.8) 30 30 - 7200 (32.02) 1306 (592.4) 30 30 - 7200 (32.02) 1442 (654.1) B3164-24 30 30 - 7200 (32.02) 1562 (708.5) B3165-24 30 30 - 7200 (32.02) 1821 (826.0) B3161-30 - 36-42 - 7200 (32.02) 1370 (621.4) B3162-30 - 36-42 - 7200 (32.02) 1502 (681.3) - 36-42 - 7200 (32.02) 1640 (743.9) B3164-30 - 36-42 - 7200 (32.02) 1761 (798.8) B3165-30 - 36-42 - 7200 (32.02) 2008 (910.8) B3161-36 - 36-42 - 7200 (32.02) 1574 (713.9) - 36-42 - 7200 (32.02) 1701 (771.6) - 36-42 - 7200 (32.02) 1857 (842.3) B3164-36 - 36-42 - 7200 (32.02) 1961 (889.5) B3165-36 - 36-42 - 7200 (32.02) 2216 (1005.2) B3163-20 20" (450) (500) B3162-24 B3163-24 B3163-30 24" 30" (600) (750) Supports, Guides, Shields & Saddles B3162-36 B3163-36 36" (900) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 122 Pipe Supports, Guides, Shields & Saddles Insulation Thickness 1" (25.4) 11/2" (38.1) 2" (50.8) Part Number B3160 B3161 B3162 Insulation Thickness 21/2" (63.5) 3" (76.2) 4" (101.6) Part Number B3163 B3164 B3165 'C' 'A' 'C' 'B' Pipe Covering Protection Saddle (Continued) Nominal Pipe Size (255.6) 813/16" 97/16" 101/8" B3163-12 B3164-12 B3165-12 105/8" 113/16" 125/16" B3161-14 B3162-14 Thickness of Covering (Per ASTM C 585) 75/8" 83/16" 83/4" 91/4" (193.7) (27.0) (222.2) 11/16" 15/8" 21/8" (234.9) 25/8" (66.7) (246.1) (273.0) 31/8" 41/8" (104.8) (257.2) 87/8" 91/2" 101/8" (269.9) 105/8" (269.9) 105/8" (269.9) (284.2) (284.2) (309.6) 111/4" 125/16" (285.7) (312.7) 113/16" 123/16" (312.7) 911/16" 103/4" 101/16" (255.6) 915/16" (252.4) 101/16" (255.6) 811/16" (220.7) 11/2" (38.1) 105/8" (269.9) 105/8" (269.9) 105/8" (269.9) 93/16" (233.4) 2" (50.8) 113/16" (284.2) 113/16" (284.2) 111/4" (285.7) 93/4" (247.6) 21/2" (63.5) B3164-14 113/4" (298.4) 1111/16" (296.9) 113/4" (298.4) 101/4" (260.3) 3" (76.2) B3165-14 127/8" (327.0) 127/16" (315.9) 127/8" (327.0) 113/16" (284.2) 4" (101.6) B3161-16 111/8" (282.6) 111/8" (282.6) 113/16" (284.2) 911/16" (246.1) 11/2" (38.1) B3162-16 1113/16" (300.0) 1111/16" (296.9) 113/4" (298.4) 1014" (260.3) 2" (50.8) 125/16" (312.7) 121/8" (308.0) 125/16" (312.7) 1011/16" (271.5) 21/2" (63.5) B3164-16 127/8" (327.0) 129/16" (319.1) 127/8" (327.0) 111/4" (285.7) 3" (76.2) B3165-16 B3161-18 1315/16" (354.0) 139/16" (344.5) 1315/16" (354.0) 121/4" (311.1) (311.1) 121/8" (308.0) 121/4" (311.1) 1011/16" (271.5) 4" 11/2" (101.6) 121/4" B3162-18 127/8" (327.0) 121/2" (317.5) 127/8" (327.0) 111/4" (285.7) 2" (50.8) 133/8" (339.7) 13" (330.2) 133/8" (339.7) 1111/16" (296.9) 21/2" (63.5) B3164-18 1315/16" (354.0) 139/16" (344.5) 1315/16" (354.0) 121/4" (311.1) 3" (76.2) B3165-18 B3161-20 15" 133/8" (381.0) (369.9) 4" 11/2" (101.6) (339.7) 131/4" 1111/16" (336.5) (330.2) -133/8" -- (339.7) 149/16" 13" B3162-20 B3163-20 1315/16" (354.0) 131/2" (342.9) 1315/16" (354.0) 123/16" (309.6) (366.7) 14" (355.6) -- -- 1211/16" (322.3) 2" 21/2" (50.8) 147/16" B3164-20 1415/16" (379.4) 149/16" (369.9) -- -- 133/16" (350.8) 3" (76.2) B3165-20 B3161-24 161/4" 1511/16" (412.7) (403.2) --- --- 141/4" 1311/16" (361.9) 4" 11/2" (101.6) (398.5) 157/8" 155/16" B3162-24 161/4" (412.8) 157/8" (403.2) -- -- 143/16" (360.4) 2" (50.8) 163/4" (425.4) 165/16" (414.3) -- -- 145/8" (377.8) 21/2" (63.5) B3164-24 173/8" (441.3) 167/8" (428.6) -- -- 151/4" (387.3) 3" (76.2) B3165-24 B3161-30 187/16" (468.3) 1715/16" (455.6) 187/8" (479.4) 1611/16" (423.9) 4" 11/2" (101.6) -- --- (412.7) -- --- 161/4" B3162-30 -- -- 193/8" (492.1) -- -- 173/16" (436.6) 2" (50.8) -- -- 1915/16" (506.4) -- -- 1711/16" (449.3) 21/2" (63.5) B3160-12 B3161-12 B3162-12 B3163-14 B3163-16 B3163-18 B3163-24 B3163-30 12" 14" 16" 18" 20" 24" 30" (300) (350) (400) (450) (500) (600) (750) 815/16" 99/16" 101/16" Centerline of Pipe to Outside of Saddle 'C' (227.0) (242.9) (223.8) (239.7) (388.9) (225.4) (241.3) (257.2) (208.0) (296.9) (347.7) (41.3) (54.0) (79.4) (38.1) (38.1) (63.5) (38.1) (38.1) B3164-30 -- -- 201/2" (520.7) -- -- 183/16" (462.0) 3" (76.2) B3165-30 -- -- 211/2" (546.1) -- -- 193/16" (487.4) 4" (101.6) B3161-36 -- -- 221/8" (562.0) -- -- 1911/16" (500.1) 11/2" (38.1) -- -- 225/8" (574.7) -- -- 203/16" (512.8) 2" (50.8) -- -- 233/16" (589.0) -- -- 2011/16" (525.5) 21/2" (63.5) -- -- 2311/16" (601.7) -- -- 213/16" (538.2) 3" (76.2) -- 2411/16" -- 223/16" (563.6) 4" (101.6) B3162-36 B3163-36 B3164-36 B3165-36 36" (900) -- (627.1) -- All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 123 Supports, Guides, Shields & Saddles Part No. Centerline of Pipe to Centerline of Roll 'A' 'B' 'A' B3117SL, B3118SL B3114, B3120 B3119SL B3122, B3122A B3124, B3126 B3110 Pipe Supports, Guides, Shields & Saddles Selection Tables for: Figure B3151 Insulation Protection Shield (Page 125) Figure B3153 Insulation Protection Shield with 'Loc' Tabs (Page 125) Figure B3154 Short Insulation Protection Shield (Page 126) Figure B3155 Short Insulation Protection Shield with 'Loc' Tabs (Page 126) Insulation Protection Shields Shield Size Selection Table Nominal Pipe or Tubing Size Insulation Thickness 1 /2" (12.7) 3 /4" (19.0) 1" (25.4) 11/2" (38.1) 2" (50.8) 21/2" (63.5) 3" (76.2) 4" (101.6) 1/2" (15) 1X 2X 3X 5X 7X -- -- -- 3/4" (20) 3X 3X 3X 4X 5X 6X 7X 8X --- --- --- 1" (25) 2X 2X 11/4" (32) 3X 4X 4X 7X 8X -- -- -- 11/2" 2" (40) 3X 4X 4X 5X 5X 6X 7X 8X 9X 9X -10X* -11X* --- 21/2" 3" (65) 5X 6X 6X 7X 7X 8X 9X 9X 10X* 10X* 11X* 11X* 11X* 12Y* 13Y* 14Z 31/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" (90) 7X 8X ----------- 8X 9X ----------- 9X 9X 10Y* 11Y* 13Y* 15Z 17Z 18Z 20Z 22Z 24Z 28Z 10X* 10X* 11Y* 12Y* 14Z 16Z 18Z 19Z 21Z 23Z 25Z 29Z 11X* 11X* 12Y* 13Y* 15Z 17Z 19Z 20Z 22Z 24Z 26Z 30Z 12Y* 12Y* 13Y* 14Z 16Z 18Z 20Z 21Z 23Z 25Z 27Z 31Z 13Y* 13Y* 14Z 15Z 17Z 19Z 21Z 22Z 24Z 26Z 28Z 32Z 15Z 15Z 16Z 17Z 19Z 21Z 23Z 24Z 26Z 28Z 30Z 33Z (50) (80) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) *When selecting B3154 or B3155, replace 'X' or 'Y' designation with 'Z'. Pipe Hanger Size Selection Table Nominal Pipe or Tubing Size 1/2" (15) Insulation Thickness 1/2" (12.7) 3/4" (19.0) 1" (25.4) 11/2" (38.1) 2" (50.8) 21/2" (63.5) 3" (76.2) 4" (101.6) 11/2 2 21/2 31/2 5 -- -- -- 21/2 31/2 -- Supports, Guides, Shields & Saddles 3/4" (20) 2 21/2 5 -- -- 1" (25) 2 21/2 3 4 5 -- -- -- 11/4" (32) 21/2 3 3 5 5 -- -- -- 11/2" (40) 21/2 3 31/2 5 6 -- -- -- 2" (50) 3 31/2 4 5 6 8 8 -- 21/2" 3" (65) 31/2 4 4 5 5 5 6 6 8 8 8 8 10 10 10 12 5 5 ----------- 5 6 ----------- 6 6 8 8 10 12 14 16 18 20 22 26 8 8 8 10 12 14 16 18 20 22 24 28 8 8 10 10 12 16 18 18 20 22 24 28 10 10 10 12 14 16 18 20 22 24 26 30 10 10 12 12 16 18 20 20 22 24 26 30 12 12 14 16 18 20 22 22 24 26 28 32 31/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" (80) (90) (100) (125) (150) (200) (250) (300) (350) (400) (450) (500) (600) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 124 Pipe Supports, Guides, Shields & Saddles Material: Steel (Stainless steel available) Stock Size 'L' Shield I.D. (Inside Dia.) 'L' Standard Finish: Pre-Galvanized Service: Designed to protect pipe insulation when used with hangers. Ordering: Specify part number and finish. Stock Size B3151 Shield I.D. (Inside Dia.) B3153 Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 41 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 40. Note: See Selection Tables on page 124 for proper sizing. B3153 same dimension as B3151, but with bottom tabs for centering and securing the shield to hanger. Figure B3151 Insulation Protection Shield Figure B3153 Insulation Protection Shield with "Loc" Tabs Part No. Wt./C Stock Size 'L' Shield 'I.D.' Lbs. kg Required Pipe Hanger Size 11/2" (40) (28.1) 2" (50) (65) B3151-1X B3153-1X 18 Ga. (1.2) 12" (304.8) 1.90 (48.2) 50 (22.7) B3151-2X B3153-2X 18 Ga. (1.2) 12" (304.8) 2.38 (60.4) 62 B3151-3X B3153-3X 18 Ga. (1.2) 12" (304.8) 2.88 (73.1) 75 (34.0) 21/2" B3151-4X B3153-4X 18 Ga. (1.2) 12" (304.8) 3.50 (88.9) 92 (41.7) 3" (80) 104 (47.2) 31/2" (90) B3151-5X B3153-5X 18 Ga. (1.2) 12" (304.8) 4.00 B3151-6X B3153-6X 18 Ga. (1.2) 12" (304.8) 4.50 (114.3) 118 (53.5) 4" (100) B3151-7X B3153-7X 18 Ga. (1.2) 12" (304.8) 5.00 (127.0) 129 (58.5) 5" (125) B3151-8X B3153-8X 18 Ga. (1.2) 12" (304.8) 5.56 (141.2) 147 (66.7) 5" (125) B3151-9X B3153-9X 16 Ga. (1.5) 12" (304.8) 6.64 (168.6) 219 (99.3) 6" (150) B3151-10X B3153-10X 16 Ga. (1.5) 12" (304.8) 7.64 (194.0) 253 (114.7) 8" (200) B3151-11X B3153-11X 16 Ga. (1.5) 12" (304.8) 8.64 (219.4) 286 (129.7) 8" (200) B3151-10Y -- 16 Ga. (1.5) 18" (457.2) 7.64 (194.0) 377 (171.0) 8" (200) B3151-11Y -- 16 Ga. (1.5) 18" (457.2) 8.64 (219.4) 424 (192.3) 8" (200) B3151-12Y -- 16 Ga. (1.5) 18" (457.2) 9.64 (244.8) 475 (215.4) 10" (250) B3151-13Y -- 16 Ga. (1.5) 18" (457.2) 10.76 (273.3) 529 (239.9) 10" (250) B3151-14Z -- 14 Ga. (1.9) 24" (609.6) 11.76 (298.7) 964 (437.3) 12" (300) B3151-15Z -- 14 Ga. (1.9) 24" (609.6) 12.76 (324.1) 1045 (474.0) 12" (300) B3151-16Z -- 14 Ga. (1.9) 24" (609.6) 14.00 (355.6) 1146 (519.8) 14" (350) B3151-17Z -- 14 Ga. (1.9) 24" (609.6) 15.00 (381.0) 1227 (556.5) 16" (400) B3151-18Z -- 14 Ga. (1.9) 24" (609.6) 16.00 (406.4) 1308 (593.3) 16" (400) B3151-19Z -- 14 Ga. (1.9) 24" (609.6) 17.00 (431.8) 1393 (631.8) 18" (450) B3151-20Z -- 12 Ga. (2.6) 24" (609.6) 18.00 (457.2) 2064 (936.2) 18" (450) B3151-21Z -- 12 Ga. (2.6) 24" (609.6) 19.00 (482.6) 2178 (987.9) 20" (500) B3151-22Z -- 12 Ga. (2.6) 24" (609.6) 20.00 (508.0) 2292 (1039.6) 20" (500) B3151-23Z -- 12 Ga. (2.6) 24" (609.6) 21.00 (533.4) 2406 (1091.3) 24" (600) B3151-24Z -- 12 Ga. (2.6) 24" (609.6) 22.00 (558.8) 2520 (1143.1) 24" (600) B3151-25Z -- 12 Ga. (2.6) 24" (609.6) 23.00 (584.2) 2634 (1194.8) 24" (600) B3151-26Z -- 12 Ga. (2.6) 24" (609.6) 24.00 (609.6) 2753 (1248.7) 24" (600) B3151-27Z -- 12 Ga. (2.6) 24" (609.6) 25.00 (635.0) 2862 (1298.2) 30" (750) B3151-28Z -- 12 Ga. (2.6) 24" (609.6) 26.00 (660.4) 2980 (1351.7) 30" (750) B3151-29Z -- 12 Ga. (2.6) 24" (609.6) 27.00 (685.8) 3094 (1403.4) 30" (750) B3151-30Z -- 12 Ga. (2.6) 24" (609.6) 28.00 (711.2) 3208 (1455.1) 30" (750) (101.6) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 125 Supports, Guides, Shields & Saddles Part No. Pipe Supports, Guides, Shields & Saddles Material: Steel (Stainless steel available) Standard Finish: Pre-Galvanized 'L' 'L' Shield I.D. (Inside Dia.) Service: Designed for protection of foam, fiberglass, or high density insulation when used with pipe hangers. Ordering: Specify part number and finish. Stock Size Note: See Selection Tables on page 124 for proper sizing. B3154 Shield I.D. (Inside Dia.) Stock Size B3155 B3155 same dimension as B3154 but with bottom tabs for centering and securing the shield to hanger. Figure B3154 Short Insulation Protection Shield Figure B3155 Short Insulation Protection Shield with "Loc" Tabs Part No. Part No. Wt./C Stock Size 'L' Shield 'I.D.' Lbs. kN Required Pipe Hanger Size B3154-1X B3155-1X 18 Ga. (1.2) 8" (203.2) 1.90 (48.2) 36 (16.3) 11/2" (40) B3154-2X B3155-2X 18 Ga. (1.2) 8" (203.2) 2.38 (60.4) 45 (20.4) 2" (50) B3154-3X B3155-3X 18 Ga. (1.2) 8" (203.2) 2.88 (73.1) 54 (24.5) 21/2" (65) B3154-4X B3155-4X 18 Ga. (1.2) 8" (203.2) 3.50 (88.9) 66 (29.9) 3" (80) B3154-5X B3155-5X 18 Ga. (1.2) 8" (203.2) 4.00 (101.6) 75 (34.0) 31/2" (90) B3154-6X B3155-6X 18 Ga. (1.2) 8" (203.2) 4.50 (114.3) 84 (38.1) 4" (100) B3154-7X B3155-7X 18 Ga. (1.2) 8" (203.2) 5.00 (127.0) 93 (42.2) 5" (125) B3154-8X B3155-8X 18 Ga. (1.2) 8" (203.2) 5.56 (141.2) 105 (47.6) 5" (125) B3154-9X B3155-9X 18 Ga. (1.2) 8" (203.2) 6.64 (168.6) 126 (57.1) 6" (150) B3154-10Z B3155-10Z 18 Ga. (1.2) 12" (304.8) 7.64 (194.0) 218 (98.9) 8" (200) B3154-11Z B3155-11Z 18 Ga. (1.2) 12" (304.8) 8.64 (219.4) 247 (112.0) 8" (200) B3154-12Z B3155-12Z 18 Ga. (1.2) 12" (304.8) 9.64 (244.8) 273 (123.8) 10" (250) B3154-13Z B3155-13Z 18 Ga. (1.2) 12" (304.8) 10.76 (273.3) 304 (137.9) 10" (250) B3154-14Z B3155-14Z 18 Ga. (1.2) 12" (304.8) 11.76 (298.7) 332 (150.6) 12" (300) B3154-15Z B3155-15Z 18 Ga. (1.2) 12" (304.8) 12.76 (324.1) 360 (163.3) 12" (300) Supports, Guides, Shields & Saddles All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 126 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 127 Supports, Guides, Shields & Saddles Pipe Supports, Guides, Shields & Saddles Concrete Inserts Concrete Inserts Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Plated Zinc (ASTM B 633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A 123), Red Primer, Plastic Coating, Dura-Green® and other special coatings are available upon request. Approvals (as noted) Items in this section are Underwriters’ Laboratories Listed, comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society MSS SP-69 & SP-58. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 128 Concrete Inserts Material: Steel Standard Finish: Plain or Electro-Plated 'B' Ordering: Specify part number and finish. 'D' 'D' Underside of anchor bolt to bottom of plate Steel Size Note: Design load is based off of rod sizes. Before installation ensure that concrete is sufficient to carry the load. Thread Size 'A' with Thread Length 'C' Figure B3019 Adjustable Metal Deck Ceiling Bolt Thread Size Part No. 'A' Thread Length 'C' 'B' Design Load 'D' Wt./C Steel Size Lbs kN Lbs. kg B3019-3/8 3/8"-16 21/2" (63.5) 63/8" (161.9) 11/4" (31.7) 7 Ga. x 11/4" x 10" (4.5 x 31.7 x 254.0) 730 (3.25) 80 (36.3) B3019-1/2 1/2"-13 21/2" (63.5) 61/2" (165.1) 11/4" (31.7) 7 Ga. x 11/4" x 10" (4.5 x 31.7 x 254.0) 1350 (6.00) 99 (44.9) B3019-5/8 5/8"-11 21/2" (63.5) 63/4" (171.4) 11/4" (31.7) 7 Ga. x 11/4" x 10" (4.5 x 31.7 x 254.0) 2160 (9.61) 129 (58.5) B3019-3/4 3/4"-10 21/2" (63.5) 63/16" (157.2) 21/4" (57.1) 1/4" x 3" x 10" (6.3 x 76.2 x 254.0) 3230 (14.37) 238 (107.9) For maximum load rating, install plate on top of deck ribs. Material: Steel Standard Finish: Plain or Electro-Plated Service: Designed to be embedded in concrete for attachment of 1/4"-20 to 1/2"-13 hanger rods. 'A' Ordering: Specify part number, size and finish. How to Install: Locate and nail to form. Pour concrete and strip forms when set. Remove color coded plug, install rod and lock with jam nut. 'H' Note: Design load is based off of rod sizes. Before installation ensure that concrete is sufficient to carry the load. 11/4" (31.7) Figure B2501 Light Duty Spot Insert Design Load Part No. Rod Size 'A' B2501-1/4 1/4"-20 27/16" B2501-3/8 3/8"-16 31/16" B2501-1/2 1/2"-13 41/8" 'H' Wt./C Lbs. kN Lbs. kg 250 (1.11) 16 (7.2) (61.9) 7/8" (22.2) (77.8) 17/8" (47.6) 730 (3.25) 22 (10.0) (104.8) 17/8" (47.6) 1350 (6.00) 26 (11.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 129 Concrete Inserts Service: Designed for installation in metal deck forms for attachment of hanger rod. Pipe Supports, Guides, Shields & Saddles Material: Steel Standard Finish: Plain or Electro-Plated Concrete Inserts Service: Designed to be embedded in concrete to attach 1/4"-20 to 7/8"-9 hanger rods. How to Install: Attach concrete insert to forms and install reinforcing rods as required. After forms are dismantled, the knockout can be removed from the insert. The N2500 Insert Nut can be installed and the rod fastened to the nut. The rod should touch the inside top of the insert but should not be forced further to avoid damaging the insert. 2" (50.8) 31/4" (82.5) Material Thickness 12 Gauge (2.6) Ordering: Specify part number and finish. (Order N2500 nuts separately). 19/16" (39.7) Weight: Wt./C 46 Lbs. (20.8 kg) 11/2" Approvals: Underwriters' Laboratories Listed for maximum pipe size 6" (150). Complies with Federal Specification WW-H-171E & A-A-1192A Type 19 and Manufacturers Standardization Society SP-69 & SP-58 Type 18. (38.1) Hanger Rod and Nut Not Included Design Load: Loading based on a straight pull of 600 Lbs. (2.67 kN). Note: Before installation ensure that concrete is sufficient to carry the load. Figure B2500 Light Duty Spot Insert Material: Steel Standard Finish: Plain or Electro-Plated 11/4" 11/4" (31.7) (31.7) Service: Designed for use with B2500 Spot Insert. Ordering: Specify part number and finish. 5/16" (7.9) 'A' Figure N2500 Steel Insert Nut Part No. Tap Size 'A' Lbs. Wt./C kg N2500-1/4 1/4"-20 14 (6.3) N2500-3/8 3/8"-16 13 (5.9) N2500-1/2 1/2"-13 12 (5.4) N2500-5/8 5/8"-11 11 (5.0) N2500-3/4 3/4"-10 11 (5.0) N2500-7/8 7/8"-9 10 (4.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 130 Concrete Inserts Material: Malleable Iron Service: Designed to be embedded in concrete to attach 3/8"-16 to 7/8"-9 hanger rods. 2" (50.8) 33/8" Note: Design Loads based on B3014N Malleable Iron Insert Nut below. (85.7) How to Install: Attach concrete insert to forms and install reinforcing rods as required. After forms are dismantled, the B3014N nut can be installed and the rod fastened to the nut. The rod should touch the inside top of the insert. 13/16" (20.6) 21/4" (57.1) Ordering: Specify part number and finish. Order B3014N Insert Nut (sold separately) from below. 31/4" Weight: Wt./C 166 Lbs. (75.3 kg) (82.5) Approvals: Underwriters' Laboratories Listed when used with B3014N Insert Nut. Complies with Federal Specification WW-H-171E & A-A-1192A Type 18 and Manufacturers Standardization Society SP-69 & SP-58 Type 18. Horizontal Adjustment: For 3/8"-16, 1/2"-13, 5/8"-11 rods - Adjustment is 13/4" (44.4) For 3/4"-10, 7/8"-9 rods - Adjustment is 13/16" (30.2) Figure B3014 Malleable Iron Insert Material: Malleable Iron Standard Finish: Plain or Electro-Plated 11/4" (31.7) Service: Designed for use with the B3014 Malleable Iron Insert. 1/2" (12.7) Ordering: Specify part number and finish. For 3/8"-16 thru 5/8"-11 Tap Sizes 'A' 17/8" 17/8" (47.6) (47.6) 1/2" (12.7) For 3/4"-10 & 7/8"-9 Tap Size 'A' 15/8" (41.3) Figure B3014N Malleable Iron Insert Nut Part No. Tap Size 'A' UL Max. Pipe Size B3014N-3/8 3/8"-16 4” B3014N-1/2 1/2"-13 B3014N-5/8 5/8"-11 B3014N-3/4 3/4"-10 B3014N-7/8 7/8"-9 Design Load* Wt./C Lbs. kN Lbs. kg 730 (3.25) 22 (10.0) 8” 1350 (6.00) 22 (10.0) 10” 1400 (6.23) 20 (9.1) 10” 1400 (6.23) 29 (13.1) 10” 1400 (6.23) 29 (13.1) • When used with B3014 Malleable Iron Insert. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 131 Concrete Inserts Standard Finish: Plain or Electro-Plated Pipe Supports, Guides, Shields & Saddles Material: Steel (Stainless steel available on B2505 only) Standard Finish: Plain or Pre-Galvanized Concrete Inserts Service: Designed to be embedded in concrete to attach 1/4"-20 to 7/8"-9 hanger rods. Note: For appropriate channel nut selection, see page 14. Ordering: Specify part number and finish. When supporting 10" (254) pipe, order B2505 Insert with 5 /8"-11 Channel Nuts. Approvals: Underwriters' Laboratories Listed. Complies with Manufacturers Standardization Society SP-69 & SP-58 Type 18. End Caps Channel Size 25/8" (66.7) 51/16" (128.6) Styrofoam Filled Figure B2505 thru B2508 Spot Insert Part No. Channel Size End Cap Part No. Lbs. Design Load kN Maximum Pipe Size B2505 B22 B3322 1200 (5.34) 10" B2506 B32 B3332 1000 (4.45) B2507 B42 B3342 1000 B2508 B52 B3352 1000 Wt./C Lbs. kg (250) 96 (43.5) 8" (200) 88 (39.9) (4.45) 8" (200) 77 (34.9) (4.45) 8" (200) 69 (31.3) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 132 Concrete Inserts Material: Steel Standard Finish: Electro-Plated Service: Designed to be embedded in concrete where heavy loads are required in curtain wall applications. Styrofoam end caps prevent concrete seepage into the channel. Ordering: Specify part number and finish. Channel nuts are sold separately, see page 14 for appropriate selection. Design Load: 5000 Lbs. (22.2 kN). Loading based on two N225 channel nuts spaced 3” (76.2 mm) on center and a minimum of 2” (50.8 mm) from the end of the insert. Approvals: Complies with Manufacturers Standardization Society SP-69 & SP-58 Type 18. 2" 5/32" (4.0) (50.8) Dia. Nail Holes 8" (203.2) 12" (304.8) 51/2” (139.7) Styrofoam End Caps 15/8” (41.3) 15/8” (41.3) Figure B2503 Heavy Duty Spot Insert All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 133 Concrete Inserts Weight: Wt./C 42 Lbs. (19.0 kg) Pipe Supports, Guides, Shields & Saddles 25/8” Material: Steel 15/8” (66.7) (41.3) Standard Finish: Plain, Pre-Galvanized or HotDip Galvanized Concrete Inserts Service: Concrete insert should be secured to forms on 16” (406.4 mm) to 24” (609.6 mm) intervals. 15/8” Note: For appropriate channel nut selection, see page 14. (41.3) Styrofoam Filler B3322 End Cap B22-I-3 thru B22-I-8 Ordering: Specify part number and finish. To order inserts without styrofoam and end caps add insert only to the part number. 4” (101.6) Design Load: 2000 Lbs. (8.89 kN) per foot for B22-I-12 thru B22-I-240 in 3000 psi concrete. Loads concentrated within the last 2” (50.8 mm) of inserts 8” (203.2 mm) and longer should not exceed 1000 Lbs. (4.45 kN). 15/8” 11/2” (41.3) (38.1) 3/4” (19.0) 31/8” .188” (4.8) Knockouts for Nailing Inserts To Forms 11/16” (79.4) Styrofoam Filler Material: 12 Gauge (2.6) (17.4) 15/8” B22-I-12 thru B22-I-240 (41.3) B205 End Cap Figure B22I Continuous Concrete Insert Length Wt./C Part No. Design Load Lbs. kg Lbs. kN B22-I-3 3” (76) 72 (32.6) 500 (2.22) B22-I-4 4” (101) 88 (39.9) 800 (3.56) B22-I-6 6” (152) 120 (54.4) 1000 (4.45) B22-I-8 8” (203) 152 (68.9) 1200 (5.34) Length Wt./C Part No. B22-I-12 B22-I-16 B22-I-20 B22-I-24 B22-I-32 B22-I-36 B22-I-40 B22-I-48 B22-I-60 B22-I-72 B22-I-84 B22-I-96 B22-I-108 B22-I-120 B22-I-144 B22-I-168 B22-I-192 B22-I-216 B22-I-240 Lbs. 12” 16” 20” 24” 32” 36” 40” 48” 60” 72” 84” 96” 108” 120” 144” 168” 192” 216” 240” (305) (406) (508) (609) (813) (914) (1016) (1219) (1524) (1829) (2133) (2438) (2743) (3048) (3657) (4267) (4877) (5486) (6096) 224 289 353 420 553 620 686 820 1018 1218 1417 1616 1816 2016 2416 2816 3216 3616 4016 kg (101.6) (131.1) (160.1) (190.5) (250.8) (281.2) (311.1) (371.9) (461.7) (552.5) (642.7) (733.0) (823.7) (914.4) (1095.9) (1277.3) (1458.7) (1640.2) (1821.6) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 134 Concrete Inserts Material: Steel 25/8” 15/8” Standard Finish: Plain, Pre-Galvanized or HotDip Galvanized (41.3) Service: Concrete insert should be secured to forms on 16” (406.4 mm) to 24” (609.6 mm) intervals. 13/8” Note: For appropriate channel nut selection, see page 14. (34.9) B3332 End Cap Styrofoam Filler B32-I-3 thru B32-I-8 Ordering: Specify part number and finish. To order inserts without styrofoam and end caps add insert only to the part number. 4” (101.6) Design Load: 2000 Lbs. (8.89 kN) per foot for B32-I-12 thru B32-I-240 in 3000 psi concrete. Loads concentrated within the last 2” (50.8 mm) of inserts 8” (203.2 mm) and longer should not exceed 1000 Lbs. (4.45 kN). 15/8” 11/2” (41.3) (38.1) 3/4” (19.0) 27/8” 11/16” (73.0) .188” (4.8) Knockouts for Nailing Inserts To Forms Styrofoam Filler Material: 12 Gauge (2.6) (17.4) 13/8” B32-I-12 thru B32-I-240 (34.9) B206 End Cap Figure B32I Continuous Concrete Insert Length Wt./C Part No. Design Load Lbs. kg Lbs. kN B32-I-3 3” (76) 65 (29.5) 500 (2.22) B32-I-4 4” (101) 80 (36.3) 800 (3.56) B32-I-6 6” (152) 108 (49.0) 1000 (4.45) B32-I-8 8” (203) 137 (62.1) 1200 (5.34) Length Wt./C Part No. B32-I-12 B32-I-16 B32-I-20 B32-I-24 B32-I-32 B32-I-36 B32-I-40 B32-I-48 B32-I-60 B32-I-72 B32-I-84 B32-I-96 B32-I-108 B32-I-120 B32-I-144 B32-I-168 B32-I-192 B32-I-216 B32-I-240 12” 16” 20” 24” 32” 36” 40” 48” 60” 72” 84” 96” 108” 120” 144” 168” 192” 216” 240” (305) (406) (508) (609) (813) (914) (1016) (1219) (1524) (1829) (2133) (2438) (2743) (3048) (3657) (4267) (4877) (5486) (6096) Lbs. kg 202 262 316 376 496 556 616 736 915 1095 1274 1453 1633 1813 2173 2533 2893 3253 3613 (91.6) (118.8) (143.3) (170.5) (225.0) (252.2) (279.4) (333.8) (415.0) (496.7) (577.9) (659.0) (740.7) (822.3) (985.6) (1148.9) (1312.2) (1475.5) (1638.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 135 Concrete Inserts (66.7) Pipe Supports, Guides, Shields & Saddles 29/16” Material: Steel 15/8” (65.1) (41.3) Standard Finish: Plain, Pre-Galvanized or HotDip Galvanized Concrete Inserts Service: Concrete insert should be secured to forms on 16” (406.4 mm) to 24” (609.6 mm) intervals. 13/16” Note: For appropriate channel nut selection, see page 14. (20.6) B3352 End Cap Styrofoam Filler B52-I-3 thru B52-I-8 Ordering: Specify part number and finish. To order inserts without styrofoam and end caps add insert only to the part number. 4” (101.6) Design Load: 1500 Lbs. (6.67 kN) per foot for B52-I-12 thru B52-I-240 in 3000 psi concrete. Loads concentrated within the last 2” (50.8 mm) of inserts 8” (203.2 mm) and longer should not exceed 750 Lbs. (3.33 kN). 15/8” 11/2” (41.3) (38.1) 3/4” (19.0) 25/16” .188” (4.8) Knockouts for Nailing Inserts To Forms 11/16” (58.7) Styrofoam Filler Material: 12 Gauge (2.6) (17.4) 13/16” B52-I-12 thru B52-I-240 (20.6) B220 End Cap Figure B52I Continuous Concrete Insert Length Wt./C Part No. Design Load Lbs. kg Lbs. kN B52-I-3 3” (76) 53 (24.0) 400 (1.78) B52-I-4 4” (101) 63 (28.6) 500 (2.22) B52-I-6 6” (152) 85 (38.5) 750 (3.33) B52-I-8 8” (203) 106 (48.1) 1000 (4.45) Length Wt./C Part No. B52-I-12 B52-I-16 B52-I-20 B52-I-24 B52-I-32 B52-I-36 B52-I-40 B52-I-48 B52-I-60 B52-I-72 B52-I-84 B52-I-96 B52-I-108 B52-I-120 B52-I-144 B52-I-168 B52-I-192 B52-I-216 B52-I-240 12” 16” 20” 24” 32” 36” 40” 48” 60” 72” 84” 96” 108” 120” 144” 168” 192” 216” 240” (305) (406) (508) (609) (813) (914) (1016) (1219) (1524) (1829) (2133) (2438) (2743) (3048) (3657) (4267) (4877) (5486) (6096) Lbs. kg 157 202 237 282 373 419 464 556 692 829 965 1107 1237 1374 1648 1922 2196 2470 2744 (71.2) (91.6) (107.5) (127.9) (169.2) (190.0) (210.4) (252.2) (313.9) (376.0) (437.7) (502.1) (561.1) (623.2) (747.5) (871.8) (996.1) (1120.4) (1244.6) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 136 Concrete Inserts Material: Steel Service: Designed to attach pipe sleeves to wall or floor forms before concrete pours. Ordering: Specify part number and finish. Figure BD40 Pipe Sleeve Fastener Part No. Sleeve Diameter 5/16" (7.9) All Diameters BD40 Wall Thickness 2" (50.8) to 6" (152.4) and under Wt./C Lbs. kg 1.5 (.68) Schedule 40 Pipe Material: Steel Standard Finish: Zinc Phosphate Service: Designed to attach pipe sleeves to wall or floor forms before concrete pours. Ordering: Specify part number and finish. Figure BE-5-8 and BE-9-12 Pipe Sleeve Fastener Wt./C Part No. BE-5-8 BE-9-12 Sleeve Diameter Wall Thickness 6" (152.4) Schedule 80 Pipe 8" to 10" (203.2 to 254.0) Schedule 40 Pipe 9" to 14" (228.6 to 355.6) Schedule 80 Pipe Lbs. kg 3.5 (1.6) 4.0 (1.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 137 Concrete Inserts Standard Finish: Zinc Phosphate Brackets Brackets Brackets offered in this section are designed for support of pipe or hanger rod attachments. Brackets offer a convenient means of supporting pipe from a vertical surface. Materials Carbon Steel material is mig-welded into bracket assemblies. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Plated Zinc (ASTM B 633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A 123), Red Primer, Plastic Coating, Dura-Green® and other special coatings are available upon request. Approvals (as noted) Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society MSS SP-69 & SP-58. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 138 Brackets 1" Material: Steel (25.4) Standard Finish: Plain or Electro-Plated 'A' Service: Designed for suspending light loads at fixed distances from walls or structures. 7 /16" Dia. (11.1) Ordering: Specify part number and finish. For 3/8"-16 rod. Hanger Rod Not Included 'B' Steel Size 13 Brackets 'C' /16" Dia. (20.6) 2 Holes 1" (25.4) Figure B3068 Light Duty Welded Bracket Design Load Part No. 'A' 'B' 'C' Steel Size Wt./C Lbs. kN Lbs. kg B3068-1 10" (254.0) 61/2" (165.1) 9" (228.6) 1/4" x 11/2" (6.3 x 38.1) 730 (3.25) 284 (128.8) B3068-2 14" (355.6) 101/2" (266.7) 13" (330.2) 1/4" x 11/2" (6.3 x 38.1) 730 (3.25) 429 (194.6) B3068-3 20" (508.0) 161/2" (419.1) 19" (482.6) (9.5 x 50.8) 730 (3.25) 1279 (580.1) 3/8" x 2" 3 /8" Dia. 11/4" (9.5) (31.7) 9 /16" Dia. (14.3) 2 Holes Material: Steel Standard Finish: Plain or Electro-Plated 'B' Service: Designed for supporting pipe from walls or structures where lateral adjustment is required. 'A' 45 o Ordering: Specify part number and finish. 15/8" B22 Channel (41.2) B32 Channel 2" 11/4" (50.8) (31.7) Figure B3064 Adjustable Strut Bracket Design Load Part No. 'A' 'B' Wt./C Lbs. kN Lbs. kg B3064-1 15" (381.0) 12" (304.8) 1200 (5.34) 660 (299.4) B3064-2 21" (533.4) 18" (457.2) 800 (3.56) 1004 (455.4) B3064-3 27" (685.8) 24" (609.6) 600 (2.67) 1346 (610.5) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 139 Brackets Material: Steel; (Stainless Steel available) Standard Finish: Plain or Electro-Plated 11/4" Service: Designed for suspending pipe loads under 1500 Lbs. (6.67 kN) from walls or structures. 'D' (31.7) Ordering: Specify part number and finish. 21/2" Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 33 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 32. (63.5) 'A' Brackets Angle Iron Size 'C' 1" (25.4) 13/16" Dia. (20.6) 2 Holes 3/8" (9.5) 'B' Figure B3066 Medium Duty Angle Bracket Part No. 'A' 'B' 'C' 'D' B3066-0 18" (457.2) 5" (127.0) 151/2" (393.7) 12" (304.8) B3066-1 24" (609.6) 5" (127.0) 211/2" (546.1) 18" (457.2) B3066-2 30" (762.0) 6" (152.5) 271/2" (698.5) 24" (609.6) Design Load Part No. Angle Iron Size Wt./C Lbs. kN Lbs. kg (825.1) B3066-0 3/16" x 11/2" x 11/2" (4.8 x 38.1 x 38.1) 1500 (6.67) 1819 B3066-1 3/16" x 13/4" x 13/4" (4.8 x 44.4 x 44.4) 1500 (6.67) 1803 (1271.4) (6.3 x 50.8 x 50.8) 1500 (6.67) 4973 (2255.7) B3066-2 1/4" x 2" x 2" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 140 Brackets Material: Steel (Stainless steel available) Only one hole in top for B3067-0 Standard Finish: Plain or Electro-Plated 'D' Service: Designed for suspending pipe loads under 3000 Lbs. (13.34kN) from walls or structures. 'E' Ordering: Specify part number and finish. 'G' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 34 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 33. 'F' 'A' Angle Iron Size Brackets 'C' 1" (25.4) 'H' 3 Holes 1 /2" (12.7) 'B' Figure B3067 Heavy Duty Angle Bracket Part No. 'A' 'B' 'C' 'D' 'E' B3067-0 18" (457.2) 5" (127.0) 151/4" (387.3) 12" (304.8) 23/4" (69.8) B3067-1 24" (609.6) 6" (152.4) 213/8" (542.9) 18" (457.2) 23/4" (69.8) B3067-2 30" (762.0) 6" (152.4) 271/2" (698.5) 24" (609.6) 23/4" (69.8) B3067-3 36" (914.4) 6" (152.4) 331/4" (844.5) 30" (762.0) 3" (76.2) B3067-4 42" (1066.8) 7" (177.8) 39" (990.6) 36" (914.4) 3" (76.2) B3067-5 50" (1270.0) 7" (177.8) 46" (1168.4) 42" (1066.8) 31/2" (88.9) Part No. 'F' Design Load B3067-0 13/8" (34.9) 'G' - 'H' - Angle Iron Size Lbs. Wt./C kN Lbs. kg 13/16" (20.6) 1/4" x 11/2" x 2" (4.8 x 38.1 x 50.8) 3000 (13.34) 2584 (1172.1) (23.8) 3/8" x 2" x 2" (9.5 x 50.8 x 50.8) 3000 (13.34) 5385 (2442.6) B3067-1 17/16" (36.5) 23/4" (69.8) 15/16" B3067-2 11/2" (38.1) 21/2" (63.5) 11/16" (27.0) 3/8" x 2" x 21/2" (9.5 x 50.8 x 63.5) 3000 (13.34) 6841 (3103.1) (41.3) 21/2" (63.5) 11/16" (27.0) 3/8" x 2" x 21/2" (9.5 x 50.8 x 63.5) 3000 (13.34) 8439 (3827.9) (38.1) 31/2" (88.9) 11/16" (27.0) 3/8" x 21/2"x 31/2" (9.5 x 63.5 x 88.9) 3000 (13.34) 14497 (6575.8) (38.1) 31/2" (88.9) 11/16" (27.0) 3/8" x 21/2"x 31/2" (9.5 x 63.5 x 88.9) 3000 (13.34) 17015 (7718.0) B3067-3 15/8" B3067-4 11/2" B3067-5 11/2" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 141 Upper Attachments Upper Attachments Upper attachments offered in this section are designed to suspend hanger rods from beams, concrete, and other structural surfaces by bolting or welding. Materials Carbon Steel and Malleable Iron are used in the manufacturing of upper attachments and provide the high strength properties required. Stainless Steel and other materials are available. Finishes The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black and Electro-Plated Zinc (ASTM B 633 SC3). Hot-Dip Galvanized After Fabrication (ASTM A 123), Red Primer, Plastic Coating, Dura-Green® and other special coatings are available upon request. Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not be uniformly coated with special finishes. In some cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, copper plated, or in stainless steel. Approvals (as noted) Items in this section comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society MSS SP-69 & SP-58. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 142 Upper Attachments Material: Malleable Iron (Stainless Steel Type 304 available) 27/8" 'B' Overall Height (73.0) 2" 'B' Standard Finish: Plain or Electro-Plated (50.8) Service: Designed for attaching a hanger or support rod to beams, ceilings, or walls. For 1/4" Flat Head Machine Screws or Wood Screws Ordering: Specify part number and finish. 13/8" (34.9) 'A' (Rod or Pipe Thread) Hanger Rod or Pipe Not Included B3199RCT Figure B3199 Ceiling Flange (Available with Dura-Copper finish as B3199RCT-Size) Thread Size 'A' Design Load 'B' Wt./C Lbs. kN Lbs. kg B3199R-3/8 B3199RCT-3/8 3/8"-16 7/16" (11.1) 180 (.80) 13 (5.9) B3199R-1/2 B3199RCT-1/2 1/2"-13 1/2" (12.7) 180 (.80) 17 (7.7) Upper Attachments Part No. Material: Steel (Stainless steel available) Standard Finish: Plain or Electro-Plated 'T' Service: Designed for attaching a hanger rod to to the side of beams or walls. 'B' 'A' Hole Size Ordering: Specify part number and finish. 'D' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 35 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 34. 'D' 'C' 'B' Figure B3060 Side Beam Angle Clip Part No. Hole Size 'A' Design Load 'B' 'C' 'D' 'T' Wt./C Lbs. kN Lbs. kg 7/16" (11.1) 23/16" (55.6) 2" (50.8) 11/4" (31.7) 1/4" (6.3) 305 (1.35) 53 (24.0) B3060-1/2 9/16" (14.3) 23/16" (55.6) 2" (50.8) 11/4" (31.7) 1/4" (6.3) 565 (2.51) 51 (23.1) B3060-5/8 11/16" (17.5) 23/16" (50.8) 11/4" (31.7) 1/4" (6.3) 909 (4.02) 48 (21.8) B3060-3/4 13/16" (76.2) 13/4" (44.4) 3/8" (9.5) 1355 (6.03) 169 (74.8) B3060-7/8 15/16" (101.6) 21/2" (63.5) 3/8" (9.5) 1870 (8.32) 312 (141.5) B3060-3/8 (20.6) (23.8) 3" 4" (55.6) (76.2) (101.6) 2" 3" 4" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 143 Upper Attachments Material: Steel (Stainless steel available) 7 Ga. 9 /32" Dia (4.5) Standard Finish: Plain or Electro-Plated (7.1) 2 Holes 13 Service: Designed for attaching 3/8” hanger rod to the side of beams or walls. /16" (20.6) 7 /16" Dia (11.1) 17/8" Design Load: 300 Lbs. (1.33kN) 2 Holes (47.6) Weight: Wt./C 15 Lbs. (6.8 kg) 1 /2" Ordering: Specify part number and finish. (12.7) 15/16" 1 (33.3) 1 /4" Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 35 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 34. (31.7) Figure B3060L Light Duty Angle Clip Upper Attachments Material: Steel 15 1 /4" Dia For 3/8" -16 rod. 7 /16" Dia /16" (11.1) (23.8) Service: Designed for for attaching hanger rod to the side of beams or walls. (6.3) 3 4 Holes 15 2 /16" (55.6) /16" Design Load: 500 Lbs. (2.22 kN) when installed in either direction. (23.8) For 1/2" -13 rod. 9 /16" Dia (14.3) Standard Finish: Plain or Electro-Plated Weight: Wt./C 49 Lbs. (22.2 kg) 2" 23/16" (50.8) (55.6) Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 35 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 34. Figure B3070 Reversible Angle Clip All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 144 Upper Attachments Material: Malleable Iron For #12 Flat Head Machine Screws or Wood Screws Standard Finish: Plain or Electro-Plated Service: Designed for attaching hanger rod to the side of beams or walls. 'B' Tapped Hole Weight: Wt./C 12 Lbs. (5.4 kg) Ordering: Specify part number and finish. 'A' (Rod Size) Hanger Rod Not Included 'C' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 35 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 34. Figure B3058 Side Beam Connector Rod Size 'A' Design Load B3058-3/8 3/8"-16 23/8" B3058-1/2 1/2"-13 23/4" 'B' 'C' Wt./C Lbs. kN Lbs. kg (60.3) 9/16" (14.3) 250 (1.11) 13 (5.9) (69.8) 3/4" (19.0) 480 (2.13) 25 (11.3) Material: Malleable Iron 'T' Standard Finish: Plain or Electro-Plated 'B' Dia. Service: Designed for attaching hanger rod to the side of beams or walls. 'F' Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 35 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 34. 'A' (Rod Size) Hanger Rod Not Included 'C' 'D' 'E' Figure B3062 Side Beam Bracket Design Load With Lag Screw With Bolt To Steel Part No. Rod Size 'A' For Nominal Pipe Sizes B3062-3/8 3/8"-16 3/4"-2" (20-50) 390 B3062-1/2 1/2"-13 21/2"-31/2" (65-95) B3062-5/8 5/8"-11 4"-5" (100-125) Part No. 'B' Lbs. 'C' B3062-3/8 7/16" (11.1) 7/8" (22.2) B3062-1/2 9/16" (14.3) 13/16" B3062-5/8 3/4" (19.0) 17/16" kN kN Lbs. kg (1.73) 730 (3.25) 21 (9.5) 640 (2.84) 1350 (6.00) 44 (19.9) 760 (3.38) 2160 (9.71) 81 (36.7) 'D' 13/8" Wt./C Lbs. 'E' 'F' 'T' (34.9) 5/8" (15.9) 17/16" (36.5) 1/4" (6.3) (30.2) 113/16" (46.0) 3/4" (19.0) 17/8" (47.6) 11/32" (8.7) (36.5) 23/16" 7/8" (22.2) 21/4" (54.0) 7/16" (11.1) (55.6) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 145 Upper Attachments Part No. Upper Attachments Material: Steel (Stainless steel available) 'A' (Rod Size) Hanger Rod Not Included Standard Finish: Plain or Electro-Plated 'B' Center of cross bolt to bottom of attachment. 'B' 'T' x 'W' Steel Size 'C' Center of cross bolt to top of attachment. 'C' Service: Designed for attaching hanger rod to the bottom of structural steel where heavy loads and large hanger rod sizes are required. Can be welded in place in either the upright or inverted position. Ordering: Specify part number (with or without hardware) and finish. Field weld where required. Bolt or Pin Size 'E' Note: When ordering with hardware for sizes 3/8 thru 11/8, Hex Head Cap Screws and Hex Nuts will be supplied. For 11/4 thru 2, Clevis Pin and Cotter Pins will be supplied. Must be specified with or without hardware. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 22 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 22. 'D' Dia. Upper Attachments Figure B3083 Welded Beam Attachment (Available without hardware as B3083WO-Size) Part No. Rod Size 'A' Design Load 650 o F (349°C) 750 o F (399°C) Pin or Bolt Size Lbs. Lbs. kN Lbs. kg Lbs. (3.25) 572 (2.54) 89 (40.3) 110 (49.9) 1350 (6.00) 1057 (4,70) 87 (39.4) 123 (55.8) (19.0) 2160 (9.61) 1692 (7.52) 84 (38.1) 140 (63.5) (22.2) 3230 (14.37) 2530 (11.25) 173 (78.4) 268 (121.5) (25.4) 4480 (19.93) 3508 (15.60) 234 (106.1) 376 (170.4) 11/8" (28.6) 5900 (26.24) 4620 (20.55) 394 (178.6) 596 (270.2) 11/8"-7 11/4" (31.7) 7450 (33.14) 5830 (25.93) 402 (182.2) 680 (308.3) 11/4"-7 13/8" (34.9) 9500 (42.25) 7440 (33.09) 734 (332.7) 955 (432.9) B3083-11/2 11/2"-6 15/8" (41.3) 13800 (61.38) 10807 (48.07) 1460 (661.8) 1817 (823.7) B3083-13/4 13/4"-5 17/8" (47.6) 18600 (82.73) 14566 (64.79) 1746 (791.5) 2310 (1047.1) B3083-2 2"-41/2 21/4" (57.1) 24600 (109.42) 19625 (87.29) 2190 (992.7) 2996 (1358.1) B3083-3/8 3/8"-16 1/2" (12.7) 730 B3083-1/2 1/2"-13 5/8" (15.9) B3083-5/8 5/8"-11 3/4" B3083-3/4 3/4"-10 7/8" B3083-7/8 7/8"-9 1" 1"-8 B3083-11/8 B3083-11/4 B3083-1 Part No. 'B' kN Wt./C W/O Hardware With Hardware Dia. 'D' 'C' 'E' kg 'T' x 'W' B3083-3/8 2" (50.8) 7/8" (22.2) 9/16" (14.3) 11/4" (31.7) 1/4" x 2" (6.3 x 50.8) B3083-1/2 2" (50.8) 7/8" (22.2) 11/16" (17.5) 11/4" (31.7) 1/4" x 2" (6.3 x 50.8) B3083-5/8 2" (50.8) 7/8" (22.2) 13/16" (20.6) 11/4" (31.7) 1/4" x 2" (6.3 x 50.8) (50.8) 11/8" (28.6) 15/16" (23.8) 11/2" x 21/2" (9.5 x 63.5) (76.2) 11/4" (31.7) 11/8" x 21/2" (9.5 x 63.5) (76.2) 11/2" (38.1) 11/4" (50.8) 1/2" x 3" (12.7 x 76.2) (76.2) 11/2" (38.1) 13/8" (69.8) 1/2" x 3" (12.7 x 76.2) (50.8) 11/2" (76.2) 5/8" x 4" (15.9 x 101.6) (63.5) 13/4" (88.9) 3/4" x 5" (19.0 x 127.0) (95.2) 3/4" x 5" (19.0 x 127.0) (95.2) 3/4" x 6" (19.0 x 152.4) B3083-3/4 B3083-7/8 B3083-1 B3083-11/8 B3083-11/4 B3083-11/2 B3083-13/4 B3083-2 2" 3" 3" 3" 3" 4" 5" 5" (76.2) 2" (101.6) 21/2" (127.0) 23/4" (127.0) 31/4" (69.8) 2" (82.5) 23/8" (28.6) 2" (31.7) 2" (34.9) 23/4" (38.1) 3" (44.4) 31/2" (50.8) 33/4" (60.3) 33/4" (38.1) 3/8" (50.8) 3/8" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 146 Upper Attachments Material: Steel Standard Finish: Plain or Electro-Plated Service: Designed for attachment to structural steel. Use with B3201 Forged Steel Clevis. Note: Must be field welded to structural steel. Ordering: Specify part number and finish. 'D' Dia. Approvals: Complies with Manufacturers Standardization Society MSS SP-69 & SP-58 Type 57. 'H' 'T' 'D' Dia. 'R' 'W' 'H' B3080S 'T' 'R' Upper Attachments 'W' B3080L Figure B3080S (Short) Structural Welding Lug Figure B3080L (Long) Structural Welding Lug Part No. Short Long For Hanger Pin or Bolt Size Design Load Wt./C Short Long Lbs. kN Lbs. kg Lbs. kg B3080S-1/2 B3080L-1/2 1/2"-13 5/8" (15.9) 1350 (6.00) 44 (19.9) 71 (32.2) B3080S-5/8 B3080L-5/8 5/8"-11 3/4" (19.0) 2160 (9.61) 44 (19.9) 68 (30.8) B3080S-3/4 B3080L-3/4 3/4"-10 7/8" (22.0) 3230 (14.37) 63 (28.6) 100 (45.3) B3080S-7/8 B3080L-7/8 7/8"-9 1" (25.4) 4480 (19.93) 71 (32.2) 100 (45.3) 1"-8 11/8" (28.6) 5900 (26.24) 126 (57.1) 169 (76.6) B3080S-11/8 B3080L-11/8 11/8"-7 11/4" (31.7) 7450 (33.14) 166 (75.3) 208 (94.3) B3080S-11/4 B3080L-11/4 11/4"-7 13/8" (38.1) 9500 (42.25) 310 (140.6) 381 (172.8) B3080S-11/2 B3080L-11/2 11/2"-6 B3080S-1 B3080L-1 15/8" (41.3) 13800 (61.38) 503 (228.1) 662 (300.3) B3080S-13/4 B3080L-13/4 13/4"-5 17/8" (47.6) 18600 (82.73) 487 (220.9) 646 (293.0) B3080S-2 B3080L-2 2"-41/2 21/4" (57.1) 24600 (109.42) 744 (337.5) 808 (366.5) Short Part No. Long Hole Dia. 'D' Short 'H' B3080S-1/2 B3080L-1/2 11/16" (17.5) 11/2" (38.1) B3080S-5/8 B3080L-5/8 13/16" (20.6) 11/2" B3080S-3/4 B3080L-3/4 15/16" (23.8) 11/2" (38.1) B3080S-7/8 B3080L-7/8 11/8" (28.6) 2" (50.8) B3080S-1 B3080L-1 11/4" (31.7) 2" B3080S-11/8 B3080L-11/8 13/8" (34.9) 3" B3080S-11/4 B3080L-11/4 11/2" B3080S-11/2 B3080L-11/2 13/8" B3080S-13/4 B3080L-13/4 B3080S-2 B3080L-2 2" 23/8" (38.1) (44.4) (50.8) (60.3) 3" Long 'T' (76.2) 11/4" (31.7) 1/4" (76.2) 11/4" (31.7) 1/4" 3" (76.2) 11/4" (31.7) 3/8" 3" (76.2) 11/4" (31.7) 3/8" (50.8) 3" (76.2) 11/2" (38.1) (76.2) 4" (101.6) 11/2" (38.1) (38.1) 3" 3" (76.2) 4" (76.2) 41/2" 3" (76.2) 41/2" 4" (101.6) 41/2" 3" 'R' (101.6) 2" (114.3) 21/2" (114.3) 21/2" (114.3) 3" 'W' (6.3) 21/2" (63.5) (6.3) 21/2" (63.5) (9.5) 21/2" (63.5) (9.5) 21/2" (63.5) 1/2" (12.7) 3" (76.2) 1/2" (12.7) 3" (76.2) (50.8) 5/8" (15.9) 4" (101.6) (63.5) 3/4" (19.0) 5" (127.0) (63.5) 3/4" (19.0) 5" (127.0) (76.2) 3/4" (19.0) 6" (152.4) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 147 Upper Attachments Material: Steel Standard Finish: Plain or Electro-Plated Service: Designed for attaching hanger rod to a concrete ceiling. Allows for vertical adjustment of hanger rod. Ordering: Specify part number and finish. Note: Design load is based off rod sizes. Before installation ensure that concrete and anchorage are sufficient to carry the load. 'A' 'A' 'B' 'B' 'C' 'C' 'D' 'D' 'G' 'F' Dia. 4 Holes 'T' x 'W' Steel Size 'E' Upper Attachments Hanger Rod Not Included Figure B3085 Rod Attachment Concrete Plate Part No. Rod Size 'A' 'B' 'C' B3085-3/8 3/8"-16 B3085-1/2 1/2"-13 B3085-5/8 5/8"-11 B3085-3/4 3/4"-10 1" (25.4) 8" (203.2) 10" (254.0) B3085-7/8 7/8"-9 1" (25.4) 8" (203.2) 10" (254.0) 1"-8 2" (50.8) 8" (203.2) 12" B3085-11/8 11/8"-7 2" (50.8) 8" (203.2) B3085-11/4 11/4"-7 2" (50.8) 8" (203.2) B3085-11/2 11/2"-6 B3085-1 1" 1" 1" 2" (25.4) (25.4) (25.4) (50.8) 8" 8" 8" 8" 27/8" (73.0) (127.0) 27/8" (73.0) (127.0) 27/8" (73.0) 5" (127.0) 31/8" (79.4) 5" (127.0) 41/4" (107.7) (304.8) 6" (152.4) 41/2" (114.3) 12" (304.8) 6" (152.4) 43/4" (120.6) 12" (304.8) 6" (152.4) 5" (127.0) (152.4) 61/2" (165.1) (254.0) 10" (203.2) (254.0) 10" (203.2) (254.0) 12" (203.2) 'E' (127.0) 10" (203.2) 'D' (304.8) 5" 5" 5" 6" Design Load Part No. 'F' 'G' 'T' x 'W' Wt./C Lbs. kN Lbs. kN B3085-3/8 9/16" (14.3) 3/8" (9.5) 1/4" x 2" (6.3 x 50.8) 730 (3.25) 1145 (519.4) B3085-1/2 9/16" (14.3) 3/8" (9.5) 1/4" x 2" (6.3 x 50.8) 1350 (6.00) 1143 (518.4) B3085-5/8 9/16" (14.3) 1/2" (12.7) 1/4" x 2" (6.3 x 50.8) 2160 (9.61) 1490 (675.8) B3085-3/4 11/16" (17.5) 1/2" x 21/2" (9.5 x 63.5) 3230 (14.37) 1574 (713.9) B3085-7/8 11/16" (17.5) 1/2" x 21/2" (9.5 x 63.5) 4480 (19.93) 1635 (741.6) B3085-1 13/16" (20.6) 3/4" (19.0) 1/2" x 3" (12.7 x 76.2) 5900 (26.24) 3420 (1551.3) B3085-11/8 15/16" (23.8) 3/4" (19.0) 1/2" x 3" (12.7 x 76.2) 7450 (33.14) 3413 (1548.1) B3085-11/4 15/16" (23.8) 3/4" (19.0) 5/8" x 4" (15.9 x 101.6) 9500 (42.25) 3747 (1699.6) B3085-11/2 11/8" (25.4) 3/4" x 5" (19.0 x 127.0) 13800 (61.38) 5438 (2466.7) (28.6) 1" (12.7) 3/8" (12.7) 3/8" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 148 Upper Attachments Material: Steel Standard Finish: Plain or Electro-Plated Service: Designed for attachment to concrete ceilings. Use with B3210 or B3211 Welded Eye Rod or B3200 Weldless Eye Nut. Ordering: Specify part number and finish. Note: Hardware for sizes 3/8 thru 11/8 Hex Head Cap Screws and Hex Nuts will be supplied. For 11/4 and 11/2 sizes, Clevis Pin and Cotter Pins will be supplied. 'A' 'A' 'C' 'C' 'B' 'B' Note: Design load is based off rod sizes. Before installation ensure that concrete and anchorage are sufficient to carry the load. 'D' 'D' 'G' 'F' Dia. 4 Holes 'H' 'R' 'T' x 'W' Steel Size Upper Attachments 'S' 'E' Bolt or Pin Size Figure B3086 Clevis Concrete Plate For Hanger Rod Size 'A' B3086-3/8 3/8"-16 1" (25.4) B3086-1/2 1/2"-13 1" (25.4) 8" (203.2) 10" (254.0) B3086-5/8 5/8"-11 1" (25.4) 8" (203.2) 10" (254.0) B3086-3/4 3/4"-10 1" (25.4) 8" (203.2) B3086-7/8 7/8"-9 1" (25.4) 8" (203.2) Part No. 'B' 8" 'C' (203.2) Bolt or Pin Size 'E' 'D' (127.0) 1/2" 5" 5" 10" (254.0) 10" (254.0) 10" (254.0) (12.7) 9/16" (127.0) 5/8" (127.0) 3/4" 5" (127.0) 5" 5" 3/8" (15.9) 9/16" (14.3) 3/8" (9.5) (19.0) 9/16" (14.3) 1/2" (12.7) 7/8" (22.2) 11/16" (17.5) 1/2" (12.7) (127.0) 1" (25.4) 11/16" (17.5) 1/2" (12.7) (28.6) 13/16" (20.6) 3/4" (19.0) (31.7) 15/16" (23.8) 3/4" (19.0) (34.9) 15/16" (23.8) 3/4" (19.0) (41.3) 11/8" (28.6) 1" (25.4) 1"-8 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) B3086-11/8 11/8"-7 2" (50.8) 8" (203.2) 12" (304.8) 6" (152.4) 11/4" B3086-11/4 11/4"-7 (152.4) 13/8" B3086-11/2 11/2"-6 (152.4) 15/8" 2" 2" (50.8) (50.8) 8" 8" (203.2) (203.2) 12" (304.8) 6" 12" (304.8) 6" Design Load Part No. 'H' (50.8) 7/8" (50.8) 7/8" 2" (50.8) 2" B3086-3/8 2" B3086-1/2 2" B3086-5/8 B3086-3/4 B3086-7/8 'R' 3" 'S' (22.2) 11/4" (22.2) 11/4" 7/8" (22.2) (50.8) 11/8" (28.6) (76.2) 11/4" (31.7) 'G' (14.3) 11/8" B3086-1 'F' 'T' x 'W' (9.5) Wt./C Lbs. kN Lbs. kg (31.7) 1/4" x 2" (6.3 x 50.8) 730 (3.25) 1165 (528.4) (31.7) 1/4" x 2" (6.3 x 50.8) 1350 (6.00) 1178 (534.4) 11/4" (31.7) 1/4" x 2" (6.3 x 50.8) 2160 (9.61) 1546 (701.2) 11/2" (38.1) 3/8" x 21/2" (9.5 x 63.5) 3230 (14.37) 1673 (758.9) (50.8) 3/8" 21/2" (9.5 x 63.5) 4480 (19.93) 1783 (808.7) 2" x B3086-1 3" (76.2) 11/2" (38.1) 2" (50.8) 1/2" x 3" (12.7 x 76.2) 5900 (26.24) 3636 (1649.3) B3086-11/8 3" (76.2) 13/4" (44.4) 23/4" (69.8) 1/2" x 3" (12.7 x 76.2) 7450 (33.14) 3708 (1681.9) B3086-11/4 3" (76.2) 2" (50.8) 3" (76.2) 5/8" x 4" (15.9 x 101.6) 9500 (42.25) 3986 (1808.0) B3086-11/2 4" (101.6) 21/2" (63.5) 31/2" (88.9) 3/4" x 5" (19.0 x 127.0) 13800 (61.38) 5816 (2638.1) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 149 Upper Attachments Material: Steel Standard Finish: Plain or Electro-Plated Service: Designed for attachment to concrete ceilings. Use with B3201 Forged Steel Clevis. Ordering: Specify part number and finish. Note: Design load is based off rod sizes. Before installation ensure that concrete and anchorage are sufficient to carry the load. 'A' 'A' 'B' 'B' 'C' 'C' 'D' 'E' 'T' 'G' 'H' 'F' Dia. 4 Holes 'R' Upper Attachments 'U' Pin or Bolt Size 'W' Figure B3084 Single Lug Concrete Plate Part No. For Hanger Rod Size B3084-1/2 1/2"-13 B3084-5/8 5/8"-11 B3084-3/4 3/4"-10 B3084-7/8 7/8"-9 B3084-1 'B' 1" (25.4) 8" 1" (25.4) 8" 1" (25.4) 8" 1" (25.4) 1"-8 8" 2" (50.8) B3084-11/8 11/8"-7 B3084-11/4 11/4"-7 B3084-11/2 11/2"-6 Part No. 'A' 8" 2" (50.8) 8" 2" (50.8) 8" 2" (50.8) 'H' 8" 'C' (203.2) (203.2) (203.2) (203.2) (203.2) (203.2) (203.2) (203.2) 'R' 'D' 10" (254.0) 5" 10" (254.0) 5" 10" (254.0) 5" 10" (254.0) 5" 12" (304.8) 6" 12" (304.8) 6" 12" (304.8) 6" 12" (304.8) 6" Bolt or Pin Size 'U' (38.1) 11/4" (31.7) 5/8" (15.9) 1/4" B3084-5/8 11/2" (38.1) 11/4" (31.7) 3/4" (19.0) 1/4" B3084-3/4 11/2" (38.1) 11/4" (31.7) 7/8" (22.2) B3084-7/8 2" (50.8) 11/4" (31.7) 1" (25.4) B3084-1 2" (50.8) 11/2" (38.1) 11/8" (28.6) 1/2" (76.2) 11/2" (38.1) 11/4" (31.7) 1/2" (50.8) 13/8" (34.9) 5/8" (63.5) 15/8" (41.3) 3/4" B3084-11/2 3" 3" 3" (76.2) 2" (76.2) 21/2" (127.0) 47/8" (127.0) 413/16" (127.0) 413/16" (152.4) 53/4" (152.4) 53/4" (152.4) 511/16" (152.4) 55/8" 'F' 'G' (123.8) 9/16" (14.3) 3/8" (123.8) 9/16" (9.5) (14.3) 1/2" (122.2) 11/16" (12.7) (17.5) 1/2" (122.2) 11/16" (12.7) (17.5) 3/4" (146.0) 13/16" (19.0) (20.6) 3/4" (146.0) 15/16" (23.8) 3/4" (19.0) (144.5) 15/16" (23.8) 3/4" (19.0) (19.0) (142.9) 11/8" (28.6) 1" (25.4) Design Load 11/2" B3084-11/4 (127.0) 'T' x 'W' B3084-1/2 B3084-11/8 'E' 47/8" Wt./C Lbs. kN Lbs. kg (6.00) 1096 (497.1) x 21/2" (6.3 x 63.5) 1350 x 21/2" (6.3 x 63.5) 2160 (9.61) 1447 (656.3) 3/8" x 21/2" (9.5 x 63.5) 3230 (14.37) 1459 (661.8) 3/8" x 21/2" (9.5 x 63.5) 4480 (19.93) 2166 (982.5) x 3" (12.7 x 76.2) 5900 (26.24) 3145 (1426.6) x 3" (12.7 x 76.2) 7450 (33.14) 3170 (1437.9) x 4" (15.9 x 101.6) 9500 (42.25) 4312 (1955.9) x 5" (19.0 x 127.0) 13800 (61.38) 4470 (2027.6) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 150 Upper Attachments Material: Steel Standard Finish: Plain or Electro-Plated Service: Designed for attaching hanger rod to ceilings or bottom flange of beams. Allows for vertical adjustment of hanger rod. Ordering: Specify part number and finish. 'C' 'B' 'E' Dia. Mounting Holes 'H' Steel Size 'D' Upper Attachments 'H' From top of hanger rod nut to top of attachment. 'A' (Rod Size) Hanger Rod Not Included Figure B3082 Rod Beam Attachment Part No. Rod Size 'A' Adjustment 'H' Design Load With Lag Screws With Bolts Lbs. kN Wt./C Lbs. kN Lbs. kg B3082-3/8 3/8"-16 23/4" (69.8) 425 (1.89) 730 (3.25) 64 (29.0) B3082-1/2 1/2"-13 23/4" (69.8) 715 (3.18) 1350 (6.00) 136 (61.7) B3082-5/8 5/8"-11 211/16" (68.3) 810 (3.60) 2160 (9.61) 176 (79.8) B3082-3/4 3/4"-10 31/2" (88.9) 1500 (6.67) 3230 (14.37) 269 (122.0) B3082-7/8 7/8"-9 39/16" (90.5) 1650 (7.34) 4480 (19.93) 393 (178.2) Part No. 'B' 'C' 'D' B3082-3/8 4" (101.6) 31/8" (79.4) 33/8" (85.7) B3082-1/2 53/8" (136.5) 41/8" (104.8) 35/8" (92.1) B3082-5/8 6" (152.4) 41/2" (114.3) 311/16" B3082-3/4 65/8" (168.3) 43/4" (117.5) 43/4" (133.3) 415/16" B3082-7/8 7" (184.1) 5" Dia. 'E' Steel Size x 1" (6.3 x 25.4) 3/8" (9.5) 3/8" x 11/4" (9.5 x 31.7) 1/2" (12.7) (93.7) 3/8" x 11/2" (9.5 x 38.1) 9/16" (14.3) (120.6) 1/2" 11/2" (12.7 x 38.1) 11/16" (17.5) (12.7 x 50.8) 13/16" (20.6) (125.4) 1/4" x 1/2" x 2" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 151 Threaded Accessories Threaded Accessories Threaded accessories offered in this section are designed to reduce installation time. A wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged Steel, and Malleable Iron are used in the manufacturing of threaded accessories. Stainless Steel and other materials are available. Finishes The standard finishes for threaded accessories are plain steel (oil coated) sometimes referred to as black and Electro-Plated Zinc (ASTM B 633 SC1). Hot-Dip Galvanized After Fabrication (ASTM A 153) and other special coatings are available upon request. Approvals (as noted) Items in this section are Underwriters' Laboratories Listed, comply with Federal Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society MSS SP-69 SP-58. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 152 Threaded Accessories 'A' (Rod Size) Hanger Rod Not Included Material: Malleable Iron Standard Finish: Plain or Electro-Plated Service: Designed for use with B3175 Ring and Bolt Hanger as a non-adjustable threaded rod connection. 'C' Ordering: Specify part number and finish. Approvals: Underwriters' Laboratories Listed 3/8” - 3/4”. Complies with Federal Specification WW-H-171E & A-A-1192A Type 16 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 16. 'B' Maximum Bolt Size Figure B3222 Eye Socket Rod Size 'A' Max. Bolt Size 'B' B3222-1/4 1/4"-20 1/4" B3222-3/8 3/8"-16 1/4" B3222-1/2 1/2"-13 1/4" B3222-5/8 5/8"-11 3/8" B3222-3/4 3/4"-10 1/2" Design Load 'C' Wt./C Lbs. kN Lbs. kg (6.3) 11/8" (28.6) 400 (1.78) 6 (2.7) (6.3) 13/8" (34.9) 730 (3.25) 9 (4.1) (6.3) 11/2" (38.1) 1350 (6.00) 16 (7.2) (9.5) 13/4" (44.4) 1580 (7.03) 21 (9.5) (12.7) 2" (50.8) 1900 (8.45) 38 (17.2) 'A' (Rod Size) Hanger Rod Not Included Material: Forged Steel Standard Finish: Plain or Electro-Plated Service: Designed for use on high-temperature pipe runs where a flexible connection is required. 'C' Ordering: Specify part number and finish. 'E' 'B' Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 17 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 17. 'D' Figure B3200 Weldless Eye Nut Design Load 650°F (343°C) 750°F (399°C) Rod Size Part No. 'A' 'B' 'C' 'D' 'E' Wt./C Lbs. kN Lbs. kN Lbs. kg B3200-3/8 3/8"-16 11/2" (38.1) 13/16" (30.2) 1/2" (12.7) 2" (50.8) 730 (3.25) 572 (2.54) 66 (29.9) B3200-1/2 1/2"-13 11/2" (38.1) 13/16" (30.2) 1/2" (12.7) 2" (50.8) 1350 (6.00) 1057 (4.70) 64 (29.0) B3200-5/8 5/8"-11 11/2" (38.1) 13/16" (30.2) 1/2" (12.7) 2" (50.8) 2160 (9.61) 1692 (7.52) 62 (28.1) B3200-3/4 3/4"-10 11/2" (38.1) 13/16" (30.2) 1/2" (12.7) 2" (50.8) 3230 (14.37) 2530 (11.25) 60 (27.2) B3200-7/8 7/8"-9 2" (50.8) 111/16" (42.9) 3/4" (19.0) 25/8" (66.7) 4480 (19.93) 3508 (15.60) 190 (86.1) 1"-8 2" (50.8) 111/16" (42.9) 3/4" (19.0) 25/8" (66.7) 5900 (26.24) 4620 (20.55) 185 (83.8) 1" (25.4) 33/8" (85.7) 7450 (33.14) 5830 (25.93) 408 (184.8) 1" (25.4) 33/8" (85.7) 9500 (42.25) 7440 (33.09) 400 (181.2) 1" (25.4) 33/8" (85.7) 13800 (61.38) 10807 (48.07) 381 (172.6) B3200-1 B3200-11/8 11/8"-7 21/2" (63.5) 113/16" (46.0) B3200-11/4 11/4"-7 21/2" (63.5) 113/16" (46.0) B3200-11/2 11/2"-6 21/2" (63.5) 113/16" (46.0) B3200-13/4 13/4"-5 4" (101.6) 4" (101.6) 11/2" (38.1) 61/4" (158.7) 18600 (82.73) 14566 (64.79) 1638 (743.0) B3200-2 2"-41/2 4" (101.6) 4" (101.6) 11/2" (38.1) 61/4" (158.7) 24600 (109.42) 19265 (87.29) 1859 (842.1) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 153 Threaded Accessories Part No. Threaded Accessories Material: Steel (Stainless steel available) 'C' 'B' Standard Finish: Plain or Electro-Plated 'A' Thread Size 'E' Design Load 2 Service: Designed as a support, guide, or anchor for pipe. Hex Nuts Included 'TL' 'TL' Thread Length Ordering: Specify part number and finish. Approvals: Underwriters' Laboratories Listed for 3 /4" (20) thru 12" (300). Complies with Federal Specification WW-H-171E & A-A-1192A Type 24 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 24. 'D' Design Load 3 Design Load 1 B3188NS - Non-standard (NS) U-bolts are available upon request. Specify dimensions other than standard. B3188DI - For Ductile Iron Pipe. B3188C Plastic Coated Threaded Accessories Figure B3188 Standard U-Bolt (Available with plastic coating as B3188C-size) Part No. Nominal Pipe Size B3188-1/2 1/2" B3188-3/4 3/4" Thread Size 'A' Thread Length 'TL' (15) 1/4"-20 21/8" (20) 1/4"-20 21/8" 'B' (54.0) 15/16" (23.8) (54.0) 11/8" (28.6) 21/8" (34.9) 1" (25) 1/4"-20 (54.0) 13/8" B3188-11/4 11/4" (32) 3/8"-16 21/8" (54.0) 111/16" (42.9) B3188-11/2 11/2" (40) 3/8"-16 21/2" (63.5) 2" (50.8) 2" (50) 3/8"-16 21/2" (63.5) 27/16" (61.9) 21/2" (65) 1/2"-13 3" (76.2) 215/16" (74.6) 3" (80) 1/2"-13 3" (76.2) 39/16" (90.5) 31/2" (90) 1/2"-13 3" (76.2) 41/16" (103.2) 4" (100) 1/2"-13 3" (76.2) 49/16" (115.9) (125) 1/2"-13 3" (76.2) 521/32" (143.6) 33/4" (95.2) 63/4" (171.4) 33/4" (95.2) 83/4 " (222.2) (276.2) B3188-1 B3188-2 B3188-21/2 B3188-3 B3188-31/2 B3188-4 B3188-5 5" B3188-6 6" (150) 5/8"-11 B3188-8 8" (200) 5/8"-11 B3188-10 10" (250) 3/4"-10 4" (101.6) 107/8" B3188-12 12" (300) 7/8"-9 41/4" (107.9) 127/8" (327.0) 41/4" (107.9) 141/8" (358.8) (107.9) 161/8" (409.6) (460.4) B3188-14 14" (350) 7/8"-9 B3188-16 16" (400) 7/8"-9 41/4" (120.6) 181/8" (120.6) 201/8" (511.2) (612.8) (765.2) B3188-18 18" (450) 1"-8 43/4" B3188-20 20" (500) 1"-8 43/4" (120.6) 241/8" (120.6) 301/8" B3188-24 24" (600) 1"-8 43/4" B3188-30 30" (750) 1"-8 43/4" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 154 Threaded Accessories Part No. Tangent ‘D' 'C’ B3188-1/2 13/16" B3188-3/4 B3188-1 B3188-11/4 B3188-11/2 B3188-2 B3188-21/2 B3188-3 B3188-31/2 B3188-4 B3188-5 13/8" 15/8" 23/32" 23/8" 213/16" 37/16" 41/16" 49/16" 51/16" 65/32" cont. (30.2) 23/4" (34.9) (156.3) 23/4" 23/4" 27/8" 3" 31/4" 33/4" 4" 41/4" 41/2" 5" (187.3) 61/8" (41.3) (53.2) (60.3) (71.4) (87.3) (103.2) (115.9) (128.6) Wt./C 'E' Lbs. kg (4.5) (69.8) 25/16" (58.7) (69.8) (56.3) (127.0) 27/32" 23/32" 21/32" 21/16" 21/16" 25/16" 21/4" 21/4" 21/4" 27/32" (56.3) 10 11 11 28 29 31 72 79 84 94 104 (155.6) 213/16" (71.4) 203 (92.1) (181.0) 213/16" (71.4) 241 (109.3) (212.7) 3" (76.2) 412 (186.9) (69.8) (73.0) (76.2) (82.5) (95.2) (101.6) (107.9) (114.3) (53.2) (51.6) (52.4) (52.4) (58.7) (57.1) (57.1) (57.1) (5.0) (5.0) (12.7) (13.1) (14.0) (32.6) (35.8) (38.1) (42.6) (47.2) B3188-6 73/8" B3188-8 93/8" (238.1) 71/8" B3188-10 115/8" (295.3) 83/8" B3188-12 133/4" (349.2) 95/8" (244.5) 31/4" (82.5) 661 (299.8) B3188-14 15" (381.0) 101/4" (260.3) 31/4" (82.5) 707 (320.7) (285.7) 31/4" (82.5) 782 (354.7) (320.7) 35/8" (92.1) 1344 (609.6) B3188-16 17" (431.8) 111/4" B3188-18 191/8" (485.8) 125/8" B3188-20 211/8" (536.6) 135/8" (346.1) 35/8" (92.1) 1458 (661.3) B3188-24 251/8" (638.2) 155/8" (396.9) 35/8" (92.1) 1687 (765.2) B3188-30 311/8" (790.6) 185/8" (473.1) 35/8" (92.1) 2030 (920.8) Design Load 1 750°F (399°C) 650°F (343°C) Design Load 2 650°F (343°C) Design Load 3 650°F (343°C) Part No. B3188-1/2 B3188-3/4 B3188-1 B3188-11/4 B3188-11/2 B3188-2 B3188-21/2 B3188-3 B3188-31/2 B3188-4 B3188-5 Lbs. kN Lbs. kN Lbs. kN Lbs. kN 580 580 580 1460 1460 1460 2700 2700 2700 2700 2700 (2.58) (2.02) (3.00) 180 300 480 600 600 720 720 900 900 900 1080 (0.80) (9.40) 145 145 145 365 365 365 675 675 675 675 675 (0.64) (12.01) 454 454 454 1144 1144 1144 2114 2114 2114 2114 2114 B3188-6 4320 (19.21) 3382 (15.04) 1080 (4.80) 1080 (4.80) B3188-8 4320 (19.21) 3382 (15.04) 1080 (4.80) -- -- B3188-10 6460 (28.73) 5060 (22.50) 1615 (7.18) -- -- B3188-12 9960 (44.30) 7016 (31.21) 2490 (11.07) -- -- B3188-14 9960 (44.30) 7016 (31.21) 2490 (11.07) -- -- B3188-16 9960 (44.30) 7016 (31.21) 2490 (11.07) -- -- B3188-18 11800 (52.48) 9240 (41.10) -- -- -- -- B3188-20 11800 (52.48) 9240 (41.10) -- -- -- -- B3188-24 11800 (52.48) 9240 (41.10) -- -- -- -- B3188-30 11800 (52.48) 9240 (41.10) -- -- -- -- (2.58) (2.58) (6.49) (6.49) (6.49) (12.01) (12.01) (12.01) (12.01) (2.02) (2.02) (5.09) (5.09) (5.09) (9.40) (9.40) (9.40) (9.40) (0.64) (0.64) (1.62) (1.62) (1.62) (3.00) (3.00) (3.00) (3.00) (1.33) (2.13) (2.67) (2.67) (3.20) (3.20) (4.00) (4.00) (4.00) (4.80) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 155 Threaded Accessories Figure B3188 Standard U-Bolt Threaded Accessories 'A' (Rod Size) Hanger Rod Not Included 'N' 'B' Center of clevis pin to underside of top 'D' Boss Dia. 'W' Leg Width 'N' Thickness of threaded top. 'P' Pin Dia 'D' Standard Finish: Plain or Electro-Plated Service: Designed as an adjustable hanger rod connection for high temperature pipe runs. Ordering: Specify part number and finish. When ordering with hardware for sizes 3/8" thru 11/8", Hex Head Cap Screw and Hex Nut will be supplied. For 11/4" thru 2, Clevis Pin and Cotter Pins will be supplied. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 14 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 14. 'B' 'T' 'T' Material: Forged Steel 'G' Grip Figure B3201 Forged Steel Clevis (Available without hardware as B3201WO-size) Part No. Rod Size 'A' 'B' Grip 'G' 'D' Pin Dia. 'P' 'N' Threaded Accessories B3201-3/8 3/8"-16 39/16" (90.5) 17/16" (36.5) 1/2" (12.7) 5/8" (15.9) 1/2" (12.7) B3201-1/2 1/2"-13 39/16" (90.5) 17/16" (36.5) 1/2" (12.7) 5/8" (15.9) 5/8" (15.9) B3201-5/8 5/8"-11 39/16" (90.5) 17/16" (36.5) 5/8" (15.9) 5/8" (15.9) 3/4" (19.0) B3201-3/4 3/4"-10 (101.6) 21/2" (63.5) 3/4" (19.0) 11/8" (28.6) 7/8" (22.2) B3201-7/8 7/8"-9 4" (101.6) 21/2" (63.5) 7/8" (22.2) 11/8" (28.6) 1" (25.4) (28.6) 4" 1"-8 51/16" (128.6) 3" (76.2) 1" (25.4) 11/4" (31.7) 11/8" B3201-11/8 11/8"-7 51/16" (128.6) 3" (76.2) 11/8" (28.6) 11/4" (31.7) 11/4" (31.7) B3201-11/4 11/4"-7 51/16" (128.6) 3" (76.2) 11/4" (31.7) 11/4" (31.7) 13/8" (34.9) B3201-11/2 11/2"-6 6" (152.4) 31/2" (88.9) 11/2" (38.1) 11/2" (38.1) 15/8" (41.3) B3201-13/4 13/4"-5 515/16" (101.6) 11/2" (38.1) 13/4" (44.4) 17/8" (47.6) B3201-2 2"-41/2 (127.0) 21/2" (63.5) 21/4" (57.1) 21/4" (57.1) B3201-1 (150.8) 7" (177.8) 4" 5" Design Load 650°F (343°C) 750°F (399°C) Part No. 'T' B3201-3/8 5/16" B3201-1/2 5/16" B3201-5/8 5/16" B3201-3/4 3/8" B3201-7/8 3/8" B3201-1 1/2" B3201-11/8 1/2" B3201-11/4 1/2" B3201-11/2 1/2" B3201-13/4 1/2" B3201-2 5/8" 'W' With Pin Wt./C Without Pin Lbs. kN Lbs. kN Lbs. kg Lbs. kg (7.9) 11/16" (27.0) 730 (3.25) 572 (2.54) 102 (46.2) 85 (38.5) (7.9) 11/16" (27.0) 1350 (6.00) 1057 (4.70) 112 (50.8) 82 (37.2) (7.9) 11/16" (27.0) 2160 (9.61) 1692 (7.52) 134 (60.8) 78 (35.4) (9.5) 11/4" (31.7) 3230 (14.37) 2530 (11.25) 250 (113.4) 163 (73.9) (9.5) 11/4" (31.7) 4480 (19.93) 3508 (15.60) 305 (138.3) 161 (73.0) (12.7) 11/2" (38.1) 5900 (26.24) 4620 (20.55) 656 (297.5) 449 (203.6) (12.7) 11/2" (38.1) 7450 (33.14) 5830 (25.93) 718 (325.7) 433 (196.4) (12.7) 11/2" (38.1) 9500 (42.25) 7440 (33.09) 603 (273.5) 382 (173.3) (12.7) 13/4" (44.4) 13800 (61.38) 10807 (48.07) 952 (431.8) 600 (272.1) (12.7) 2" (50.8) 18600 (82.73) 14566 (64.79) 1357 (615.5) 800 (362.9) (15.9) 21/2" (63.5) 24600 (109.42) 19625 (87.29) 2403 (1090.0) 1600 (725.7) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 156 Threaded Accessories Material: Malleable Iron 'F' Distance from outside of boss to outside of boss. 'F' Standard Finish: Plain 'E' Service: Designed for supporting hanger rod from beam clamps and other attachments allowing for vertical adjustment. 'G' 'D' 'B' Ordering: Specify part number and finish. 'C' 'A' (Rod Size) Hanger Rod Not Included Approvals: Underwriters' Laboratories Listed. Figure B3203 Extension Piece Rod Size 'A' B3203-3/8 3/8"-16 B3203-1/2 1/2"-13 B3203-5/8 5/8"-11 B3203-3/4 3/4"-10 B3203-7/8 7/8"-9 For Nominal Pipe Sizes 3/4" 'B' (20 to 50) 21/16" (65 to 90) 21/16" (100 to125) 27/16" 6" (150) 27/8" 8" to 12" (200 to 300) 3" 21/2" to 2" to 31/2" 4"-5" 'C' 'D' (52.4) 11/4" (31.7) 11/4" (58.7) 13/8" (31.7) (34.9) 13/8" (61.9) 11/2" (38.1) 17/16" (34.9) (73.0) 13/4" (44.4) 111/16" (36.5) (42.9) (76.2) 17/8" (47.6) 13/4" (44.4) Design Load Part No. 'E' B3203-3/8 9/16" B3203-1/2 11/16" B3203-5/8 3/4" B3203-3/4 7/8" B3203-7/8 7/8" 'F' 'G' kN Wt./C Lbs. kg (14.3) 1/2" (12.7) 1/2" (17.5) 5/8" (15.9) 1/2" (12.7) 730 (3.25) 18 (8.1) (12.7) 1350 (6.00) 37 (16.8) (19.0) 5/8" (15.9) 1/2" (12.7) 1550 (6.89) 42 (19.0) (22.2) 5/8" (15.9) 1/2" (12.7) 2100 (9.34) 56 (25.4) (22.2) 3/4" (19.0) 9/16" (14.3) 2350 (10.45) 75 (34.0) Material: Steel 1" (25.4) 13 Lbs. Standard Finish: Electro-Plated Service: Designed for attachment of 3/8" hanger rod to structure. /32"Dia. (10.3) Ordering: Specify part number and finish. 25/8" Approvals: Underwriters' Laboratories Listed for up to 2" (50) pipe. (66.7) Design Load: 610 lbs (2.71kN) Figure B3223-3/8" Offset Eye Socket All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 157 Threaded Accessories Part No. Threaded Accessories Material: Malleable Iron 'A' (Rod Size) Hanger Rod Not Included Standard Finish: Plain or Electro-Plated Service: Designed to provide vertical rod adjustment when used with B3175 Ring and Bolt Hanger. 'C' 'B' Ordering: Specify part number and finish. Approvals: Complies with Federal Specifications WW-H-171E & A-A-1192A Type 15 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 15. 'D' Dia. B3224CT Figure B3224 Hanger Adjuster (Available with Dura-Copper coating as B3224CT-3/8 or 1/2 only) Part No. Rod Size 'A' For Nominal Pipe Sizes B3224-1/4 1/4"-20 3/8" B3224-3/8 3/8"-16 B3224-1/2 1/2"-13 21/2" to 31/2" B3224-5/8 5/8"-11 4" to 5" B3224-3/4 3/4"-10 1/2" to 2" 6" Design Load 'B' 'C' 'D' Wt./C Lbs. kN Lbs. kg (10) 13/4" (44.4) 37/8" (98.4) 7/32" (5.5) 230 (1.02) 9 (4.1) (15 to 50) 13/4" (44.4) 37/8" (98.4) 13/32" (10.3) 730 (3.25) 28 (12.7) (65 to 90) 13/4" (44.4) 37/8" (98.4) 13/32" (10.3) 730 (3.25) 29 (13.1) (100 to 125) 21/4" (57.1) 51/8" (130.2) 1/2" (12.7) 730 (3.25) 30 (13.6) (150) 21/4" (57.1) 51/8" 9/16" (14.3) 860 (3.82) 74 (33.5) Threaded Accessories 'A' (Rod Size) Hanger Rod Not Included (130.2) Material: Forged Steel Standard Finish: Plain or Electro-Plated Service: Designed as a hanger rod connection with up to 6” (152.4) adjustment. Ordering: Specify part number and finish. Approvals: Complies with Federal Specification WW-H-171E & A-A-1192A Type 13 and Manufacturers Standardization Society MSS SP-69 & SP-58 Type 13. 3" (76.2) Rod TakeOut 6" Note: 3" (76.2), 9" (228.6) and 12" (304.8) openings are available on special request. Turnbuckle has one end that is right-handed thread, other end is left-handed thread. (152.4) Figure B3202 Turnbuckle Design Load 750°F (399°C) 650°F (343°C) Wt./C Rod Size 'A' Lbs. kN Lbs. kN Lbs. kg B3202-3/8 3/8"-16 730 (3.25) 572 (2.54) 38 (17.2) B3202-1/2 1/2"-13 1350 (6.00) 1057 (4.70) 54 (24.5) B3202-5/8 5/8"-11 2160 (9.61) 1692 (7.52) 91 (41.3) B3202-3/4 3/4"-10 3230 (14.37) 2530 (11.25) 130 (58.9) B3202-7/8 7/8"-9 4480 (19.93) 3508 (15.60) 202 (91.6) Part No. 1"-8 5900 (26.24) 4620 (20.55) 270 (122.5) B3202-11/8 11/8"-7 7450 (33.14) 5830 (25.93) 354 (160.6) B3202-11/4 11/4"-7 9500 (42.25) 7440 (33.09) 445 (201.8) B3202-11/2 11/2"-6 13800 (61.38) 10807 (48.07) 640 (290.3) B3202-13/4 13/4"-5 18600 (82.73) 14566 (64.79) 1100 (498.9) B3202-2 2"-41/2 24600 (109.42) 19625 (87.29) 1490 (675.8) B3202-1 All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 158 Threaded Accessories Material: Steel Standard Finish: Plain or Electro-Plated 'TL' Specify 'L' Service: Designed for use in pipe hanger assemblies. Ordering: Specify part number, length and finish. (B3205L for left hand threads on one end) 'TL' 'A' Thread Size Figure B3205 Threaded Rod (right-hand threads - both ends) (Available with right & left-hand threads as B3205L-size) B3205-3/8 x 'L' B3205-1/2 x 'L' B3205-5/8 x 'L' B3205-3/4 x 'L' B3205-7/8 x 'L' B3205-1 x 'L' B3205-11/8 x 'L' B3205-11/4 x 'L' B3205-11/2 x 'L' B3205-13/4 x 'L' B3205-2 x 'L' B3205-21/4 x 'L' B3205-21/2 x 'L' B3205-23/4 x 'L' B3205-3 x 'L' B3205-31/4 x 'L' B3205-31/2 x 'L' B3205-33/4 x 'L' Standard Thread Length 'TL' 3/8"-16 21/2" (63.5) 1/2"-13 21/2" 21/2" 3" 31/2" 4" 41/2" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" (63.5) 5/8"-11 3/4"-10 7/8"-9 1"-8 11/8"-7 11/4"-7 11/2"-6 13/4"-5 2"-41/2 21/4"-41/2 21/2"-4 23/4"-4 3"-4 31/4"-8UN 31/2"-8UN 33/4"-8UN (63.5) (76.2) (88.9) (101.6) (114.3) (127.0) (152.4) (177.8) (203.2) (228.6) (254.0) (279.4) (304.8) (330.2) (355.6) (381.0) Design Load 650°F (343°C) 750°F (399°C) Lbs. kN Lbs. kN 730 1350 2160 3230 4480 5900 7450 9500 13800 18600 24600 32300 39800 49400 60100 71900 84700 98500 (3.25) 572 1057 1692 2530 3508 4620 5830 7440 10807 14566 19625 25295 31169 38687 47066 56307 66331 77139 (2.54) (6.00) (9.61) (14.37) (19.93) (26.24) (33.14) (42.25) (61.38) (82.73) (109.42) (143.67) (177.03) (219.73) (267.32) (319.81) (376.74) (438.13) (4.70) (7.52) (11.25) (15.60) (20.55) (25.93) (33.09) (48.07) (64.79) Threaded Accessories Part No. Thread Size 'A' (87.29) (112.51) (138.64) (172.08) (209.35) (250.45) (295.04) (343.11) Material: Steel Standard Finish: Plain or Electro-Plated Service: Designed for use in pipe hanger assemblies. Standard Lengths ‘L’: 36” (91.4cm), 72” (182.9cm), 120” (304.8cm), 144” (365.7cm) Ordering: Specify part number, length and finish. Part No. & Size Threads Per Inch 1/4” 20 18 16 13 11 10 9 8 ATR x ‘L’ ATR 5/16” x ‘L’ ATR 3/8” x ‘L’ ATR 1/2” x ‘L’ ATR 5/8” x ‘L’ ATR 3/4” x ‘L’ ATR 7/8” x ‘L’ ATR 1” x ‘L’ Recommended Load Lbs. 240 400 730 1350 2160 3230 4480 5900 Wt./C Ft. kN Lbs. kg (1.07) 12 19 29 53 89 123 170 225 (5.44) (1.78) (3.24) (6.00) (9.60) (14.37) (19.93) (26.24) (8.62) (13.15) (24.04) (40.37) (55.79) (77.11) (102.06) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 159 Threaded Accessories Material: Steel Eye I.D. Standard Finish: Plain or Electro-Plated Service: Designed for use in hanger supports to eliminate possible bending of threaded rod. 'A' Thread Size Ordering: Specify part number, length and finish. 'B' Thread Length 'B' Specify 'L' Figure B3210 Eye Rod (right-hand threads) (Available with left-hand threads as B3210L-size) Eye I.D. 'A' Thread Size 'B' Thread Length Specify 'L' 'B' Threaded Accessories Figure B3211 Welded Eye Rod (right-hand threads) (Available with left-hand threads as B3211L-size) Thread Size 'A' Part No. Thread Length 'B' Design Load B3210 B3211 650°F (343°C) 650°F (343°C) 750°F (399°C) Eye I.D. Lbs. kN Lbs. kN Lbs. kN B3210-3/8 x 'L' B3211-3/8 x 'L' 3/8"-16 21/2" (63.5) 1/2" (12.7) 240 (1.07) 730 (3.25) 572 (2.54) B3210-1/2 x 'L' B3211-1/2 x 'L' 1/2"-13 21/2" (63.5) 5/8" (15.9) 440 (1.96) 1350 (6.00) 1057 (4.70) B3210-5/8 x 'L' B3211-5/8 x 'L' 5/8"-11 21/2" (63.5) 3/4" (19.0) 705 (3.13) 2160 (9.61) 1692 (7.52) x 'L' B3211-3/4 x 'L' 3/4"-10 3" (76.2) 7/8" (22.2) 1050 (4.67) 3230 (14.37) 2530 (11.25) x 'L' B3211-7/8 x 'L' 7/8"-9 31/2" (88.9) 1" (25.4) 1470 (6.54) 4480 (19.93) 3508 (15.60) 1"-8 4" (101.6) 11/8" (28.6) 1940 (8.63) 5900 (26.24) 4620 (20.55) B3210-11/8 x 'L' B3211-11/8 x 'L' 11/8"-7 41/2" (114.3) 11/4" (31.7) 2430 (10.81) 7450 (33.14) 5830 (25.93) B3210-11/4 x 'L' B3211-11/4 x 'L' 11/4"-7 (127.0) 13/8" (34.9) 3120 (13.88) 9500 (42.25) 7440 (33.09) 15/8" (41.3) 4650 (20.68) 13800 (61.38) 10807 (48.07) (82.73) B3210-3/4 B3210-7/8 B3210-1 x 'L' B3210-11/2 B3210-13/4 B3211-1 x 'L' 5" x 'L' B3211-11/2 x 'L' 11/2"-6 6" (152.4) x 'L' B3211-13/4 x 'L' 13/4"-5 7" (177.8) 2" (50.8) 6380 (28.38) 18600 14566 (64.79) B3211-2 x 'L' 2"-41/2 (203.2) 21/4" (57.1) 8280 (36.83) 24600 (109.42) 19625 (87.29) B3210-2 x 'L' 8" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 160 Threaded Accessories Material: Steel Standard Finish: Plain or Electro-Plated 'B' Thread Length Service: Designed for use in hanger supports where a movement joint is required. Ordering: Specify part number, length and finish. 'A' Thread Size Specify 'L' 'B' Thread Length Figure B3210X Linked Eye Rods (Right-hand threads-both ends) (Available with right & left-hand threads as B3210XL-size) 'B' Thread Length Specify 'L' Threaded Accessories 'A' Thread Size 'B' Thread Length Figure B3211X Welded Linked Eye Rods (Right-hand threads-both ends) (Available with right & left-hand threads as B3211XL-size) Part No. Thread Size 'A' Thread Length 'B' B3210X-3/8 x 'L' B3211X-3/8 x 'L' 3/8"-16 21/2" B3210X-1/2 x 'L' B3211X-1/2 x 'L' 1/2"-13 21/2" B3210X-5/8 x 'L' B3211X-5/8 x 'L' 5/8"-11 21/2" B3210X-3/4 x 'L' B3211X-3/4 x 'L' 3/4"-10 B3210X-7/8 x 'L' B3211X-7/8 x 'L' 7/8"-9 B3210X 650°F (343°C) Eye I.D. Design Load B3211X 650°F (343°C) 750°F (399°C) Lbs. kN Lbs. kN Lbs. kN (12.7) 240 (1.07) 730 (3.25) 572 (2.54) (15.9) 440 (1.96) 1350 (6.00) 1057 (4.70) (19.0) 705 (3.13) 2160 (9.61) 1692 (7.52) 7/8" (22.2) 1050 (4.67) 3230 (14.37) 2530 (11.25) (88.9) 1" (25.4) 1470 (6.54) 4480 (19.93) 3508 (15.60) (101.6) 11/8" (28.6) 1940 (8.63) 5900 (26.24) 4620 (20.55) (114.3) 11/4" (31.7) 2430 (10.81) 7450 (33.14) 5830 (25.93) (63.5) 1/2" (63.5) 5/8" (63.5) 3/4" 3" (76.2) 31/2" B3210X-1 x 'L' B3211X-1 x 'L' 1"-8 4" B3210X-11/8 x 'L' B3211X-11/8 x 'L' 11/8"-7 41/2" B3210X-11/4 x 'L' B3211X-11/4 x 'L' 11/4"-7 5" (127.0) 13/8" (34.9) 3120 (13.88) 9500 (42.25) 7440 (33.09) B3210X-11/2 x 'L' B3211X-11/2 x 'L' 11/2"-6 6" (152.4) 15/8" (41.3) 4650 (20.68) 13800 (61.38) 10807 (48.07) B3210X-13/4 x 'L' B3211X-13/4 x 'L' 13/4"-5 7" (177.8) 2" (50.8) 6380 (28.38) 18600 (82.73) 14566 (64.79) 2"-41/2 8" (203.2) 21/4" (57.1) 8280 (36.83) 24600 (109.42) 19625 (87.29) B3210X-2 x 'L' B3211X-2 x 'L' All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 161 Threaded Accessories Material: Steel Standard Finish: Plain or Electro-Plated Radius 'D' Service: Designed for attaching to a beam flange or purlin. 'A' Thread Size Ordering: Specify part number, length and finish. 'TL' Thread Length Specify 'L' Figure B3212 J-Bolt Thread Size 'A' Part No. Thread Length 'TL' Radius 'D' Design Load Lbs. kg B3212-3/8 x 'L' 3/8"-16 2" (50.8) 1/2" (12.7) 240 (1.07) B3212-1/2 x 'L' 1/2"-13 2" (50.8) 5/8" (15.9) 440 (1.96) B3212-5/8 x 'L' 5/8"-11 21/2" (63.5) 3/4" (19.0) 705 (3.13) B3212-3/4 x 'L' 3/4"-10 21/2" (63.5) 7/8" (22.2) 1050 (4.67) 7/8"-9 21/2" (63.5) 1" (25.4) 1470 (6.54) B3212-7/8 x 'L' Threaded Accessories Material: Steel Standard Finish: Plain or Electro-Plated 'C' Service: Designed for suspending pipe supports from wood structures. Specify 'L' Ordering: Specify part number, rod size, length and finish. 'A' Thread Size 'B' Figure B3213 Coach Screw Rod Standard Rod Lengths 'L' Coach Screw Thread Length 'B' Rod Thread Length 'C' Design Load Part No. Thread Size 'A' B3213-3/8 x 'L' 3/8"-16 *31/2", 8" (88.9, 203.2) 2" (50.8) 2" (50.8) 390 (1.73) B3213-1/2 x 'L' 1/2"-13 *31/2", 8" (88.9, 203.2) 21/2" (63.5) 21/2" (63.5) 640 (2.84) Lbs. *3/8 x 31/2 and 1/2 x 31/2 will have a coach screw thread length of 2" (50.8) and a rod thread length of 1" (25.4). Design Load is based on proper installation and solid wood. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 162 kg Threaded Accessories Material: Steel Standard Finish: Plain or Electro-Plated 'B' Service: Designed for attaching light-duty hangers to wood structures. Ordering: Specify part number, length and finish. 'A' Dia. 'C' Thread Size Figure B3227 Flat End Lag Screw Wt./C Part No. 'A' 'B' 'C' Lbs. kg B3227-1/4 1/4" (6.3) 3" (76.2) #10-24 4 (1.8) B3227-5/16 5/16" (7.9) 3" (76.2) 1/4"-20 6 (2.7) B3227-3/8 3/8" (9.5) 4" (101.6) 1/4"-20 11 (5.0) B3227-1/2 1/2" (12.7) 5" (127.0) 5/16"-18 30 (13.6) B3227-5/8 5/8" (15.9) 51/2" (139.7) 3/8"-16 48 (21.8) Material: Steel Service: Designed for use in wood structures. Ordering: Specify part number and finish. B3228-Bolt Diameter x Length Figure B3228 Hex Head Lag Bolt Length Bolt Diameter and Wt./C 1/2" 5/8" (12.7) 1/4" (6.3) 3/8" (9.5) (15.9) 3/4" (19.0) 11/2" (38.1) 2.3 (1.0) 6.0 (2.7) 11.8 (5.3) 19.4 (8.8) 32.3 (14.6) 2" (50.8) 2.8 (1.3) 7.0 (3.2) 14.4 (6.5) 23.2 (10.5) 38.3 (17.4) 21/2" (63.5) 3.3 (1.5) 8.3 (3.7) 16.2 (7.3) 27.0 (12.2) 44.0 (19.9) 3" 9.8 (4.4) 18.6 (8.4) 31.0 (14.0) 47.7 (21.6) (76.2) 3.9 (1.7) 31/2" (88.9) 4.4 (2.0) 11.4 (5.2) 21.2 (9.6) 34.8 (15.8) 56.3 (25.5) 4" (101.6) 5.0 (2.2) 12.5 (5.7) 23.3 (10.5) 37.6 (17.0) 58.5 (26.5) 41/2" (114.3) 5.7 (2.6) 14.0 (6.3) 26.1 (11.8) 42.6 (19.3) 64.0 (29.0) 5" (127.0) 6.3 (2.8) 15.4 (7.0) 29.0 (13.1) 45.5 (20.6) 68.0 (30.8) 51/2" (139.7) 7.0 (3.2) 16.4 (7.4) 31.5 (14.3) 49.3 (22.3) 74.0 (33.5) 6" (152.4) 7.4 (3.3) 18.3 (8.3) 34.0 (15.4) 53.0 (24.0) 77.0 (34.9) Material: Steel Standard Finish: Electro-Plated Service: For fastening light load attachments to wood beams. Ordering: Specify part number and finish. Weight: Wt./C 1.1 lbs. (.5kg) Figure DS 16 x 2 Drive Screw All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 163 Threaded Accessories Standard Finish: Plain or Electro-Plated Threaded Accessories Material: Steel Figure B655 Steel Rod Coupling Standard Finish: Plain or Electro-Plated Design Load Part No. Size Length Wt./C Lbs. kN Lbs. kg B655-1/4 1/4"-20 7/8" (22.2) 300 (1.33) 1.9 (0.86) B655-5/16 5/16"-18 7/8" (22.2) 475 (2.11) 1.8 (0.81) B655-3/8 3/8"-16 11/8" (28.6) 730 (3.25) 3.6 (1.63) B655-1/2 1/2"-13 13/4" (44.4) 1350 (6.00) 11.3 (5.12) B655-5/8 5/8"-11 21/8" (54.0) 2160 (9.61) 17.6 (7.98) B655-3/4 3/4"-10 21/4" (57.1) 3230 (14.37) 28.1 (12.74) B655-7/8 7/8"-9 21/2" (63.5) 4480 (19.93) 57.2 (25.94) 1"-8 23/4" (69.8) 5900 (26.24) 73.7 (33.43) B655-1 Service: Designed for coupling two hanger rods of equal or reduced rod sizes. Ordering: Specify part number and finish. B655 Figure B656 Steel Reducing Rod Coupling Design Load Part No. B656-3/8 B656-1/2 B656-5/8 B656-3/4 Size Length Lbs. kN Wt./C Lbs. kg Threaded Accessories x 1/4 3/8"-16 & 1/4"-20 (25.4) 300 (1.33) 3.7 (1.68) x 3/8 1/2"-13 & 3/8"-16 11/4" (31.7) 730 (3.25) 6.6 (2.99) x 1/2 5/8"-11 & 1/2"-13 11/4" (31.7) 1350 (6.00) 11.6 (5.26) x 5/8 3/4"-10 & 5/8"-11 11/2" (38.1) 2160 (9.61) 20.6 (9.34) 7/8"-9 13/4" (44.4) 3230 (14.37) 39.4 (17.87) B656-7/8 x 3/4 & 3/4"-10 1" Hanger Rod Not Included B656 Material: Malleable Iron Standard Finish: Plain or Electro-Plated Overall Length Service: Designed for coupling two hanger rods of equal or reduced rod sizes. Ordering: Specify part number and finish. Figure B3220 Rod Coupling Part No. For Rod Size 1/4"-20 B3220-1/4 B3220-3/8 x 1/4 to 1/4"-20 3/8"-16 B3220-3/8 B3220-1/2 3/8"-16 3/8 1/2"-13 Design Load Wt./C Lbs. kN Lbs. kg 13/8" (34.9) 300 (1.33) 6 (2.7) 15/8" (41.3) 300 (1.33) 11 (5.0) 15/8" (41.3) 730 (3.25) 10 (4.5) 21/8" (54.0) 730 (3.25) 20 (9.1) B3220-1/2 1/2"-13 21/8" (54.0) 1350 (6.00) 20 (9.1) B3220-5/8 5/8"-11 21/2" (63.5) 2160 (9.61) 32 (14.5) B3220-3/4 3/4"-10 25/8" (66.7) 3230 (14.37) 42 (19.0) B3220-7/8 7/8"-9 33/16" (55.6) 4480 (19.93) 91 (41.3) 1"-8 23/4" (69.8) 5900 (26.24) 100 (45.3) B3220-1 x to 3/8"-16 Overall Length All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 164 Threaded Accessories Specify 'C' Material: Steel 'T' Standard Finish: Plain or Electro-Plated Service: Designed as a heavy-duty washer to suspend hanger rods. 'A' 'A' Ordering: Specify part number and finish. Figure B3248 Steel Washer Plate B3248-3/8 Rod Size ‘C’ 3/8” 3" (76.2) 1/4" B3248-1/2 1/2” 3" (76.2) B3248-5/8 5/8” 3" B3248-3/4 3/4” B3248-7/8 7/8” 1” Part No. B3248-1 Wt./C 'A' 'T' Lbs. kg (6.3) 64 (29.0) 1/4" (6.3) 64 (29.0) (76.2) 3/8" (9.5) 96 (43.5) 3" (76.2) 3/8" (9.5) 96 (43.5) 4" (101.6) 1/2" (12.7) 226 (102.5) 4" (101.6) 1/2" (12.7) 226 (102.5) 11/4" 5" (127.0) 1/2" (12.7) 354 (160.6) B3248-11/2 11/2" 5" (127.0) 1/2" (12.7) 354 (160.6) B3248-13/4 13/4" 5" (127.0) 1/2" (12.7) 354 (160.6) 2" 5" (127.0) 1/2" (12.7) 354 (160.6) B3248-2 Threaded Accessories B3248-11/4 Material: Steel 15/8” Standard Finish: Electro-Plated (41.3) Service: Designed as a washer to suspend hanger rods. Ordering: Specify part number and finish. Hole Size A Figure B200 Series Square Washer B200 Hole Size ‘A’ 3/8" (9.5) B201 7/16" B202 9/16" B202-1 11/16" B202-2 13/16" Part No. Bolt Size Thickness Wt./C Lbs. kg 5/16” 1/4" (6.3) 18 (8.1) (11.1) 3/8” 1/4" (6.3) 18 (8.1) (14.2) 1/2” 1/4" (6.3) 17 (7.7) (17.4) 5/8” 1/4" (6.3) 16 (7.2) (20.6) 3/4” 1/4" (6.3) 15 (6.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 165 Threaded Accessories Material: Malleable Iron Standard Finish: Plain or Electro-Plated 'T2' Service: Designed for attaching bolts to the taper of an I-beam or channel flange. Ordering: Specify part number and finish. 'A' 'A' 'T1' Figure B3234 Bevel Washer Part No. For Bolt Size B3234-3/8 3/8"-16 11/2" B3234-1/2 1/2"-13 11/2" B3234-5/8 5/8"-11 B3234-3/4 3/4"-10 B3234-7/8 7/8"-9 1 (31.7) 5/32" (31.7) 5/32" 11/2" 11/2" 2" Wt./C 2 'T ' 'A' 'T ' Lbs. kg (3.9) 11/32" (8.7) 9 (4.1) (3.9) 11/32" (8.7) 9 (4.1) (38.1) 5/32" (3.9) 13/32" (10.3) 14 (6.3) (38.1) 7/32" (5.5) 15/32" (11.9) 16 (7.2) (50.8) 7/32" (5.5) 9/16" (14.3) 33 (14.9) Threaded Accessories All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 166 Threaded Accessories Threaded Accessories All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 167 Vibra Trol® Vibra Trol To address the ever increasing issue of controlling/dampening vibration in mechanical, refrigeration, and HVAC installations, Cooper B-Line Inc. offers the following vibration and isolation products. It is our continuing effort to offer industry with quality support products that meet the demands of today’s construction environment. The following pages depict isolation and vibration control products that are commonly specified and required on piping and equipment, but not limited to, mechanical rooms. As an aid in choosing the proper vibration control device, the chart shown on the following page is a reference for obtaining Vibration Isolation Efficiency. Considerations must be given to the desired deflection and the amount of disturbing frequency (R.P.M.). All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 168 Vibra Trol® Data Selection 1/16" 1/8" 1/4" 1/2" 1" 2" 250-299 300-349 350-399 400-449 450-499 N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R 74% 79% N/R 76% 83% 87% 90% 500-599 600-699 700-799 800-899 900-999 N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R N/R 78% N/R 75% 83% 87% 90% 83% 89% 92% 94% 95% 92% 95% 96% 97% 98% 1000-1099 1100-1199 1200-1299 1300-1399 1400-1499 N/R N/R N/R N/R N/R N/R N/R 83% 86% 89% 83% 86% 89% 91% 92% 92% 94% 95% 97% 97% 96% 97% 97% 98% 98% 98% 99% 99% 99% 99% 1500-1599 1600-1699 1700-1799 1800-1899 1900-1999 N/R N/R 75% 78% 80% 90% 91% 93% 93% 94% 93% 94% 95% 95% 96% 97% 97% 97% 98% 98% 99% 99% 99% 99% 99% 99% 99% 99% 99% 99% 2000-2249 2250-2499 2500-2999 3000-3499 3500-3999 82% 85% 87% 88% 90% 95% 95% 96% 97% 98% 96% 97% 97% 98% 98% 98% 98% 98% 99% 99% 99% 99% 99% 99% 99% 99% 99% 99% 99% 99% Isolator Deflection V I B R A T I O N I S O L A T I O N E F F I C I E N C Y Critical Installations 96% to 99% Vibration Isolation Efficiency recommended (only 1% to 4% of disturbing vibration transmitted). Typical installations: TV and Radio Broadcast Studios, Concert Halls, Libraries, Churches, Hospitals, Schools and Universities, Hotels, Private Offices, Theaters, Recording Studios Standard Installations 90% to 95% Vibration Isolation Efficiency recommended (only 5% to 10% of disturbing vibration transmitted). Typical installations: Computer Equipment Areas, Restaurants, Shopping Malls, Gymnasiums, Health Clubs and Spas, Sports Arenas, Indoor Swimming Pools, Building Service Areas, Night Clubs, General Office Buildings Non-Critical Installations 75% to 89% Vibration Isolation Efficiency recommended (only 11% to 24% of disturbing vibration transmitted). Typical installations: In factory Offices, Motor Vehicle Inspection Stations and Facilities, Laundramats, Roller and Ice Skating Rinks, Factory Production Areas For 1/16" (1.6) deflection: Specify B-Line series NNP Ribbed Neoprene Pads. For 1/8" (3.2) deflection: Specify B-Line series CNP Combination Cork and Ribbed Neoprene Pads or B-Line Series VRP Pads. For 1/4" (6.3) deflection: Specify B-Line series N Neoprene Mountings or B-Line series RH Neoprene Hangers. For 1/2" (12.7) deflection: Specify B-Line series ND Neoprene Mountings or B-Line series RH Neoprene Hangers. For 1"-2" (25.4-50.8) deflection: Specify B-Line series HM Housed Spring Mountings or B-Line series OM Open Spring Mountings or B-Line series HS Spring Hangers. N/R = Not Recommended For larger deflection requirements, consult factory. Proper Sizing Once it is determined as to what type of vibration dampening device is needed, weight loading is the next crucial step. As a built in safety measure, take the actual weight of supported pipe or equipment (consider all accessories - i.e. valves, insulation, brackets, etc...) and multiply by 1.25. Then refer to the sizing chart for the selected product to determine part number. Sizing: Divide weight of equipment by points of support to determine load requirement per support. Example: 240 Lb. (90.7 kg) piece of equipment, 4 support points, take 240 x 1.25 = 300 Lbs. (136.1 kg) (safety measure), then take 300 ÷ 4 = 75 Lbs. (34.0 kg) Specify appropriate vibration device rated at 75 Lbs. (34.0 kg) for each of the support points. If weight of equipment is unequally proportionate, select mounts to satisfy the weight distribution. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 169 Vibra Trol Disturbing Frequency (RPM) Vibra Trol® Features: The NNP pad is made of oil-resistant neoprene. The pad has an alternate height rib pattern to minimize slip. Recommended load is 50 Lbs. (.22 kN) per inch2 (.0006 m2) with a range of 25-70 Lbs. (.11-.31 kN) per inch2 (.0006 m2). The NNP type has a deflection of 1/8" (3.1). For greater deflection, use multiple pads in layers. 3/8" 'W' (9.5) 'L' Typical Applications: Air conditioners, cooling towers, compressors, fans, generators, pumps, piping, process equipment, transformers, etc. NNP Type - Ribbed Neoprene Vibration Pad Use: Dampen noise and vibration in floor caused by medium and high speed equipment. Part No. Rated Load Dimensions 'L' 'W' Std. Pkg. Wt. Each Lbs. kN Lbs. NNP-4 200 (.89) 2" (50.8) 2" (50.8) 48 .04 (.02) NNP-9 450 (2.00) 3" (76.2) 3" (76.2) 36 .10 (.05) NNP-16 800 (3.56) 4" (101.6) 4" (101.6) 24 .17 (.08) NNP-36 1800 (8.00) 6" (152.4) 6" (152.4) 24 .39 (.18) NNP-81 4050 (18.01) 9" (228.6) 9" (228.6) Bulk .87 (.39) NNP-324 16200 (72.06) 18" (457.2) 18" (457.2) 6 3.50 (1.59) Features: The CNP pad is made of oil-resistant neoprene. The pad has an alternate height rib pattern to minimize slip. Recommended load is 50 Lbs. (.22 kN) per inch2 (.0006 m2) with a range of 25-70 Lbs. (.11-.31 kN) per inch2 (.0006 m2). The CNP type is rated at 3/16" (4.7) deflection. For greater deflection, use multiple pads in layers. 1" 'W' kg (25.4) 'L' Vibra Trol Typical Applications: Air conditioners, cooling towers, compressors, fans, generators, pumps, piping, process equipment, transformers, etc. CNP Type - Cork and Ribbed Neoprene Vibration Pad Use: Dampen noise and vibration in floor caused by medium and high speed equipment. Part No. Rated Load Dimensions 'L' Lbs. kN CNP-4 200 (.89) 2" CNP-9 450 (2.00) CNP-16 800 (3.56) CNP-25 1250 CNP-36 Std. Pkg. 'W' (50.8) 2" 3" (76.2) 4" (101.6) (5.56) 5" 1800 (8.00) CNP-81 4050 CNP-324 Wt. Each Lbs. kg (50.8) 48 .07 (.03) 3" (76.2) 36 .16 (.07) 4" (101.6) 24 .28 (.13) (127.0) 5" (127.0) 24 .44 (.20) 6" (152.4) 6" (152.4) 24 .63 (.29) (18.01) 9" (228.6) 9" (228.6) Bulk 1.40 (.64) 16200 (72.06) 18" (457.2) 18" (457.2) 6 5.60 (2.54) CNP-3x36 5400 (24.02) 3" (76.2) 36" (914.4) 6 1.89 (.86) CNP-4x36 7200 (32.02) 4" (101.6) 36" (914.4) 6 2.52 (1.14) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 170 Vibra Trol® Features: The CNNK pad is made of oil-resistant neoprene. The pad has an alternate height rib pattern to minimize slip. Recommended load is 50 Lbs. (.22 kN) per inch2 (.0006 m2) with a range of 25-70 Lbs. (.11-.31 kN) per inch2 (.0006 m2). The CNNK type is rated at 3/16" (4.7) deflection. For greater deflection, use multiple pads in layers. 11/2" (38.1) 13/16" (20.6) dia. hole Typical Applications: Air conditioners, cooling towers, compressors, fans, generators, pumps, piping, process equipment, transformers, etc. 'W' 'L' CNNK Type - Cork, Ribbed Neoprene and Steel Vibration Pad Use: Dampen noise and vibration in floor caused by medium and high speed equipment. Dimensions Wt. Each Lbs. kN CNNK-4 200 (.89) 2" (50.8) 2" (50.8) 48 .40 (.18) CNNK-9 450 (2.00) 3" (76.2) 3" (76.2) 36 .90 (.41) CNNK-16 800 (3.56) 4" (101.6) 4" (101.6) 24 1.60 (.73) CNNK-25 1250 (5.56) 5" (127.0) 5" (127.0) 24 2.50 (1.13) CNNK-36 1800 (8.00) 6" (152.4) 6" (152.4) Bulk 3.50 (1.59) CNNK-64 3200 (14.23) 8" (203.2) 8" (203.2) 6 6.20 (2.81) 'L' Std. Pkg. 'W' Lbs. kg Note: Has 1/4" (6.3) thick steel plate for even weight distribution. Hole in center will accept up to 3/4" (19.0) bolt. Features: The VRP pad is made of a natural rubber composition that will withstand a load of 45 Lbs. per 1" square. Rated deflection is 3/16" (4.7). Each square has 4 suction holes (1/2" (12.7) diameter) to provide a non-skid effect. The standard VRP pad has 81 squares that are 2" x 2" (50.8 x 50.8) making the pad itself 18" x 18" (457.2 x 457.2). These squares are easily cut or torn to desired sizes. 'W' 'L' VRP-16 shown 3/4" (19.0) VRP Type - Rubber Cube Vibration Pad Use: Dampen noise and vibration in floor caused by medium and high speed equipment. Part No. Rated Load Lbs. Dimensions 'L' kN Std. Pkg. 'W' Wt. Each Lbs. kg VRP-4 180 (.80) 2" (50.8) 2" (50.8) Bulk .10 (.05) VRP-16 720 (3.20) 4" (101.6) 4" (101.6) Bulk .41 (.19) VRP-36 1620 (7.20) 6" (152.4) 6" (152.4) Bulk .90 (.41) VRP-324 14580 (64.85) 18" (457.2) 18" (457.2) 3 8.15 (3.70) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 171 Vibra Trol Rated Load Part No. Vibra Trol® Use: Dampen noise and vibration of equipment when mounted on strut. Features: Vibra Strip™ is made of 45 durometer neoprene that when inserted in channel slot, provides an excellent isolation medium between equipment, duct, piping, etc., and the support channel. The inherent quality of neoprene offers noise and vibration dampening qualities. Strip is furnished in 12" (304.8) lengths, may be cut to satisfy specific requirement. Longer lengths are available upon request. Temperature Range: -20°F to 212°F (continuous) BVS Type - Vibra Strip™ for 15/8" (41.3) wide B-Line channel Max. Load Lbs. per Lineal In. Part No. Length Wt. Each Std. Pkg. Lbs. kg Lbs. kg/25.4 mm BVS-12 40 (18.1) 12" (304.8) 25 .46 (.21) BVS-120 40 (18.1) 120" (3048.0) 1 4.56 (2.07) Use: Double (NVD) deflection mount helps prevent noise and high frequency vibration (1200 RPM or greater) between equipment and solid support structures in non-critical areas. 'W' 'W/2' Features: Color-coded for load identification. All metal parts are encapsulated by oil-resistant neoprene. Base of mount incorporates a non-skid backing that eliminates attachment hardware where no lateral or severe vertical motion is present. 'C' 'L' 'B' Diameter Tapped Hole Vibra Trol 'H' Mounting molded of color coded neoprene for easy identification of capacity. 'A' Free Height Typical Applications: Air handling units, fans, air conditioners, compressors, pumps, machine tools, motors, business machines, transformers, furnaces, etc. 'D' Diameter Holes NVD Type - Double Deflection Molded Neoprene Mount Part No. Rated Load Dimensions in Inches Isolator Deflection Color Lbs. kN NVD-1-A Black 25-45 (.11-.20) .38" (9.53) NVD-1-B Green 45-110 (.20-.49) .38" (9.53) 31/4" 17/8" 17/8" 13/8" (82.5) (47.6) (47.6) (34.9) 'L' 'W' 'H' 'A' 'B' 'C' 'D' 3/8" 21/2" 5/16" (9.5) (63.5) (7.9) 31/4" 7/16" NVD-1-C Red 110-210 (.49-.93) .38" (9.53) NVD-1-D Gray 210-340 (.93-1.51) .38" (9.53) NVD-2-C Green 230-380 (1.02-1.70) .43" (11.11) 41/4" 21/2" 21/8" 17/8" 1/2" (107.9) (63.5) (54.0) (47.6) (12.7) 6" .48" (11.91) (152.4) .48" (11.91) 31/2" 23/8" 27/8" (88.9) (60.3) (73.0) NVD-2-D Red 380-700 (1.70-3.11) .43" (11.11) NVD-3-B Green 550-930 (2.44-4.13) .48" (11.91) NVD-3-C Black 930-1540 (2.44-4.13) NVD-3-D Red 930-1920 (4.13-8.54) Wt. Each 1/2" (82.5) (11.1) 45/8" 9/16" (12.7) (117.5) (14.3) Lbs. kg .19 (.09) .46 (.21) 1.00 (.45) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 172 Vibra Trol® Use: Designed for the protection of sensitive electronic, electrical, and mechanical equipment from high frequency vibration and impact shock. Features: Cup mounts accommodate multidirectional loading, can support loads radially and axially in both compression and tension. Effectively isolate frequencies above 45 Hz. Metal housing is zinc plated and furnished with either 1/4"-20 or 3/8"-16 tapped hole. The elastomer element is a high grade neoprene with excellent oil and ozone resistance. Temperature Range: -20°F to 180°F. 3" 23/8" (76.2) (60.3) 21/2" 115/16" (63.5) (49.2) 23/8" 3" (60.3) (76.2) 21/2" (63.5) 115/16" (49.2) Tap .196" (5.0) Dia. 3/8"-16 CM1 Series Tap .266" (6.7) Dia. CM2 Series Ideal for wall or ceiling mounts. Arrows indicate vibration direction. CM Type - Metal Housing and Neoprene Cup Mount Part Number CM1-14BNT CM1-24BNT Load Range Lbs. 8 to 14 14 to 24 kN Tap Size Wt. Each (.03-.06) 1/4"-20 .60 (.27) (.06-.10) 1/4"-20 .60 (.27) .60 (.27) Lbs. kg CM1-38BNT 24 to 38 (.10-.17) 1/4"-20 CM1-60BNT 38 to 60 (.17-.26) 1/4"-20 .60 (.27) CM2-30BNT 15 to 30 (.07-.13) 3/8"-16 .70 (.32) CM2-50BNT 30 to 50 (.13-.22) 3/8"-16 .70 (.32) (.22-.35) 3/8"-16 .70 (.32) (.35-.49) 3/8"-16 .70 (.32) CM2-80BNT CM2-110BNT 50 to 80 80 to 110 Approximate Height CM1 Series 11/8" (28.6) CM2 Series 11/2" (38.1) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 173 Vibra Trol 1/4"-20 Vibra Trol® OML*/OM Type Free Standing Spring Mount Use: The economical OM Series Free Standing Spring Mounts are utilized to isolate floor mounted equipment where transmission of noise and vibration (below 1200RPM) is apparent. Note: Not recommended when subject to wind loads and weight changes. Features: Spring is welded to lower load plate and upper compression plate. Mounting is facilitated by an adjustable leveling bolt. Base plate is furnished with a skid-resistant neoprene backing, making anchoring optional. Allows up to 2.10" (53.3) deflection (larger deflection mounts available). Typical Applications: Refrigeration compressors, packaged air handling and refrigeration equipment, centrifugal fans, close coupled and base mounted pumps and similar apparatus. May also be used as a vibration dampening device for pipe risers. Notes: To ensure minimum effective vibration control, the spring mount must have a static deflection at least three times (3X) greater than the floor spans deflection. Spring devices are stable with a vertical and horizontal spring constant equal to one (Kx/Ky=1). A 50% additional run-out from rated capacity to solid load is also characteristic of spring type isolators. 'L' Vibra Trol 'A' 'B' Diameter Holes 'W' 'W/2' 'D' Diameter Adjusting and Leveling Bolt With 'C' Diameter Locking Bolt. 'H' Stable Steel Spring Free And Operating Height. Acoustical Non-Skid Neoprene Pad * OML Series are Lower profile. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 174 Vibra Trol® OML*/OM Type - Free Standing Spring Mount Dimensions in Inches Spring Deflection Lbs. kN OML-1-101 25-50 (.11-.22) 1.20" (30.5) OML-1-102 50-100 (.22-.44) 1.20" (30.5) OML-1-103 100-150 (.44-.67) 1.20" (30.5) OML-1-104 150-250 (.67-1.11) 1.10" (27.9) OML-1-105 250-350 (1.11-1.55) 1.10" (27.9) OML-1-106 350-450 (1.55-2.00) 1.00" (25.4) OML-1-107 450-600 (2.00-2.67) 1.00" (25.4) OM-1-171 75-150 (.33-.67) 1.30" (33.0) OM-1-172 150-250 (.67-1.11) 1.30" (33.0) OM-1-173 250-350 (1.11-1.55) 1.30" (33.0) OM-1-174 350-500 (1.55-2.22) 1.30" (33.0) OM-1-175 500-600 (2.22-2.67) 1.10" (27.9) OM-1-176 600-750 (2.67-3.34) 1.10" (27.9) OM-1-177 750-900 (3.34-4.00) 1.10" (27.9) OM-1-178 900-1100 (4.00-4.90) 1.00" (25.4) OM-1-2010 75-150 (.33-.67) 2.10" (53.3) OM-1-2100 150-275 (.67-1.22) 2.10" (53.3) OM-1-2103 275-425 (1.22-1.90) 2.10" (53.3) OM-1-2200 425-500 (1.90-2.22) 2.10" (53.3) OM-1-2202 500-650 (2.22-2.90) 2.10" (53.3) OM-1-2203 650-775 (2.90-3.44) 2.10" (53.3) OM-1-2300 775-1000 (3.44-4.45) 2.10" (53.3) OM-1-2302 1000-1150 (4.45-5.11) 2.00" (50.8) 'L' 'W' 'H' 'A' Wt. Each 'B' 'C' 'D' Lbs. kg 2.0 (.9) 3.0 (1.4) 12.0 (5.4) 41/2" 2" 35/8" 31/2" 9/16" 5/16" 1/2" (114.3) (50.8) (92.1) (88.9) (14.3) (7.9) (12.7) Vibra Trol Rated Load Part No. 41/2" 2" 43/4" 31/2" 9/16" 5/16" 1/2" (114.3) (50.8) (120.6) (88.9) (14.3) (7.9) (12.7) 61/4" 4" 75/8" 5" (158.7) (101.6) (193.7) (127.0) 9/16" 1/2" 3/4" (14.3) (9.5) (19.0) * OML Series are Lower profile. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 175 Housed - Fail Safe Spring Mount HMLE*/HME Type - Housed 1" (25.4) & 2" (50.8) Deflection Fail Safe Spring Mount (External Adjustment Bolt) Use: HM Series Housed Spring Mounts are utilized to isolate floor mounted equipment where transmission of noise and vibration (below 1200 RPM) is apparent. This type of mount is most commonly used to support equipment on upper floors where structural deflection may occur. Features: Telescopic two-piece cast iron housing to stabilize spring where external motion may occur. Slotted mounting holes on base with skid-resistant pad. Mounting is facilitated by an adjustable leveling bolt. (If bolt mount is not required, a skid-resistant pad on top load surface is available in the HMLT/HMT series shown on pages 178 & 179). Springs are color-coded for load identification. Housing components are isolated by rubber acoustical pads. Larger capacity mountings are available. Typical Applications: Compressors, air handling units, centrifugal fans, pumps and other similar applications. May also be used as a vibration dampening device for pipe risers. Note: To ensure minimum effective vibration control, the spring mount must have a static deflection at least three times (3X) greater than the floor spans deflection. Spring devices are stable with a vertical and horizontal spring constant equal to one (Kx/Ky=1). A 50% additional run-out from rated capacity to solid load is also characteristic of spring type isolators. Vibra Trol 'L' 'F' 'A' 'B' 'W' 'W/2' Adjust mount for minimum 1/4" to maximum 1" operating clearance. 'C' Diameter Adjusting and Leveling Bolt 'H' Free and Operating Height Stable Steel Spring Acoustical Non-Skid Neoprene Pad *HMLE Series are Lower profile. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 176 Vibra Trol® HMLE*/HME Type Housed 1" (25.4) & 2" (50.8) Deflection Fail Safe Spring Mount (External Adjustment Bolt) Rated Load Dimensions in Inches Spring Deflection Part No. Spring Color Lbs. kN HMLE-1-101 Yellow 25-50 (.11-.22) 1.20" (30.5) HMLE-1-102 Blue 50-100 (.22-.44) 1.20" (30.5) HMLE-1-103 Brown 100-150 (.44-.67) 1.20" (30.5) HMLE-1-104 Black 150-250 (.67-1.11) 1.00" (25.4) HMLE-1-105 Gray 250-350 (1.11-1.55) 1.00" (25.4) HMLE-1-106 Red 350-450 (1.55-2.00) 1.00" (25.4) HMLE-1-107 Green 450-600 (2.00-2.67) 1.00" (25.4) HME-1-121 Black 45-90 (.20-.40) 1.40" (35.5) HME-1-122 Green 90-120 (.40-.53) 1.40" (35.5) HME-1-123 Yellow 120-175 (.53-.78) 1.40" (35.5) HME-1-124 Brown 175-250 (.78-1.11) 1.30" (33.0) HME-1-125 Red 250-330 (1.11-1.47) 1.30" (33.0) HME-1-126 Purple 330-450 (1.47-2.00) 1.30" (33.0) 63/8" 25/8" (161.9) (66.7) Blue 450-600 (2.00-2.67) 1.20" (30.5) HME-1-128 HME-1-129 Orange 600-750 (2.67-3.34) 1.20" (30.5) Pink 750-900 (3.34-4.00) 1.10" (27.9) HME-1-130 Gray 900-1100 (4.00-4.90) 1.00" (25.4) HME-1-131 Wht/Blk 1100-1300 (4.90-5.78) 1.00" (25.4) HME-1-132 Gold/Blk 1300-1500 (5.78-6.70) 0.90" (22.8) 48-90 (.21-.40) 2.00" (50.8) HME-1-221 Black 'W' 33/4" 43/4" 31/2" 7/16" 3/8" 5.0 (120.6) (88.9) (11.1) (9.5) (2.3) 51/8" 51/2" 4" 5/8" 1/2" 11.0 (15.9) (12.7) (5.0) 5/8" 1/2" 11.0 (15.9) (12.7) (5.0) 5/8" 5/8" 19.0 (15.9) (15.9) (8.6) 90-120 (.40-.53) 2.00" (50.8) (.53-.78) 2.00" (50.8) HME-1-224 Brown 175-250 (.78-1.11) 2.00" (50.8) 63/8" 25/8" (161.9) (66.7) HME-1-225 Red 250-330 (1.11-1.47) 2.00" (50.8) HME-1-226 Purple 330-450 (1.47-2.00) 2.00" (50.8) HME-1-227 Blue/Blk 450-600 (2.00-2.67) 2.00" (50.8) HME-1-228 Orn/Blk 600-750 (2.67-3.34) 2.00" (50.8) HME-2-225 Red 500-660 (2.22-2.93) 2.00" (50.8) HME-2-226 Purple 660-900 (2.93-4.00) 2.00" (50.8) 93/4" 25/8" (247.6) (66.7) (50.8) HME-2-228 Orn/Blk 1200-1500 (5.34-6.67) 2.00" (50.8) (130.2) (139.7) (101.6) 55/8" 51/2" 4" (142.9) (139.7) (101.6) 53/4" 83/4" 73/8" (146.0) (222.2) (187.3) *HMLE Series are Lower profile. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 177 Lbs./kg (95.2) 120-175 2.00" 'C' 21/2" White (4.00-5.34) 'B' (63.5) Yellow 900-1200 'A' 51/8" HME-1-223 Blue/Blk 'F' (130.2) HME-1-222 HME-2-227 'H' Vibra Trol HME-1-127 'L' Wt. Each Vibra Trol® HMLT*/HMT Type - Housed 1" (25.4) & 2" (50.8) Deflection Fail Safe Spring Mount (Skid Resistant Neoprene Top & Internal Adjustment Bolt) Use: HM Series Housed Spring Mounts are utilized to isolate floor mounted equipment where transmission of noise and vibration (below 1200 RPM) is apparent. This type of mount is most commonly used to support equipment on upper floors where structural deflection may occur. Features: Telescopic two-piece cast iron housing to stabilize spring where external motion may occur. Slotted mounting holes on base with skid-resistant pad. Mounting is facilitated by an internal adjustable leveling bolt. Springs are color-coded for load identification. Housing components are isolated by rubber acoustical pads. Larger capacity mountings are available. Typical Applications: Compressors, air handling units, centrifugal fans, pumps and other similar applications. May also be used as a vibration dampening device for pipe risers. Note: To ensure minimum effective vibration control, the spring mount must have a static deflection at least three times (3X) greater than the floor spans deflection. Spring devices are stable with a vertical and horizontal spring constant equal to one (Kx/Ky=1). A 50% additional run-out from rated capacity to solid load is also characteristic of spring type isolators. 'L' Vibra Trol 'F' 'A' 'B' 'W' 'W/2' Adjust mount for minimum 1/4" to maximum 1" operating clearance. Acoustical Non-Skid Neoprene Pad 'H' Free and Operating Height Stable Steel Spring Acoustical Non-Skid Neoprene Pad *HMLT Series are Lower profile. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 178 Vibra Trol® HMLT*/HMT Type - Housed 1" (25.4) & 2" (50.8) Deflection Fail Safe Spring Mount (Skid Resistant Neoprene Top & Internal Adjustment Bolt) Rated Load Dimensions in Inches Spring Deflection Part No. Spring Color Lbs. kN HMLT-1-101 Yellow 25-50 (.11-.22) 1.20" (30.5) HMLT-1-102 Blue 50-100 (.22-.44) 1.20" (30.5) HMLT-1-103 Brown 100-150 (.44-.67) 1.20" (30.5) HMLT-1-104 Black 150-250 (.67-1.11) 1.00" (25.4) HMLT-1-105 Gray 250-350 (1.11-1.55) 1.00" (25.4) HMLT-1-106 Red 350-450 (1.55-2.00) 1.00" (25.4) HMLT-1-107 Green 450-600 (2.00-2.67) 1.00" (25.4) HMT-1-121 Black 45-90 (.20-.40) 1.40" (35.5) HMT-1-122 Green 90-120 (.40-.53) 1.40" (35.5) HMT-1-123 Yellow 120-175 (.53-.78) 1.40" (35.5) HMT-1-124 Brown 175-250 (.78-1.11) 1.30" (33.0) HMT-1-125 Red 250-330 (1.11-1.47) 1.30" (33.0) HMT-1-126 Purple 330-450 (1.47-2.00) 1.30" HMT-1-127 Blue 450-600 (2.00-2.67) HMT-1-128 Orange 600-750 HMT-1-129 Pink HMT-1-130 Gray Wt. Each 'L' 'W' 'H' 'F' 'A' 'B' 51/8" 21/2" 41/8" 43/4" 31/2" 7/16" (130.2) (63.5) (88.9) (11.1) (33.0) 63/8" 25/8" 4" 5/8" 1.20" (30.5) (161.9) (66.7) (2.67-3.34) 1.20" (30.5) 750-900 (3.34-4.00) 1.10" (27.9) 900-1100 (4.00-4.90) 1.00" (25.4) HMT-1-131 Wht/Blk 1100-1300 (4.90-5.78) 1.00" (25.4) HMT-1-132 Gold/Blk 1300-1500 (5.78-6.70) 0.90" (22.8) kg 3.0 (1.4) 8.0 (3.6) Vibra Trol (104.8) (120.6) Lbs. 55/8" 51/2" (142.9) (139.7) (101.6) (15.9) *HMLT Series are Lower profile. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 179 Vibra Trol® Use: ANH Series Rubber Hangers are designed as an economical hanger to dampen noise and vibration in light duty applications. Features: Color-coded insert for load identification. Loads up to 200 Lbs. (2.01 kN) at a .20" (5.1) deflection. Steel pressure plates on top and bottom of insert. Hanging device is 11 gauge cold drawn steel wire that accommodates up to 3/16" (4.7) rod or bolt attachments. Specify part number and color for desired load. Typical Applications: Suspended ceilings and hot or cold air ducts. 11/4" (31.7) 1" (25.4) 4" (101.6) Vibra Trol For 3/16" (4.7) Rod ANH Type - Acoustical Vibration Hanger Part No. Color Code Rated Load Lbs. kN Rated Deflection ANH-20 Red 65 (.29) .20" ANH-40 Black 120 (.53) ANH-70 Blue 200 (.89) Wt. Each Lbs. kg (5.1) .16 (.07) .20" (5.1) .16 (.07) .20" (5.1) .16 (.07) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 180 Vibra Trol® Use: RH Series Neoprene Hangers are suggested to dampen noise and minor vibration from suspended high speed equipment (1200 RPM or greater). To be used in-line with all thread rod for single and trapeze type support systems. Features: Color-coded neoprene in-shear insert for load identification. Loads to 2000 Lbs. with deflections to .50" (12.7). RH hangers are available with a 30° rod swing (must specify). Hanger units are shipped assembled. Typical Applications: Suspended mechanical equipment, exhaust fans, ductwork, piping, ceilings, etc. When equipment is suspended from vibration sensitive spans, avoid using RH type hangers. Higher deflection hangers such as the HS and HES series are recommended. Note: Vibration hangers should not come in direct contact with equipment being suspended. 'A' Diameter Hole Top and Bottom for Maximum 'B' Diameter Hanger Rod 'W' 'W/2' 'L/2' 'L' Heavy Duty Hanger Box 'A' Diameter Hole for Maximum 'B' Diameter Hanger Rod Steel Washer 3" Double Deflection Neoprene Element Vibra Trol 'H' (76.2) 'F' Dimensions of Neoprene Element RH Type - Neoprene Vibration Hanger Rated Load Dimensions in Inches Wt. Each Part No. Lbs. kN 'W' 'H' 'F' 'A' 'B' RHB-Black 60-100 (.27-.44) .50" (12.7) 23/4" 2" 41/2" 2" 3/4" 5/8" RHB-Red 100-175 (.44-.78) .50" (12.7) (69.8) (50.8) (114.3) (50.8) (19.0) (15.9) RHC-Green 175-300 (.78-1.33) .50" (12.7) 23/4" 2" 41/2" 2" 3/4" 5/8" (69.8) (50.8) (114.3) (50.8) (19.0) (15.9) RHC-Purple 300-700 Isolator Deflection (1.33-3.11) .50" (12.7) 'L' RHD-Yellow 700-1100 (3.11-4.90) .50" (12.7) 3" 2" 7" 2" 3/4" 5/8" RHD-Pink 1100-2000 (4.90-8.90) .50" (12.7) (76.2) (50.8) (177.8) (50.8) (19.0) (15.9) Lbs. kg 2.0 (.9) 3.0 (1.4) 4.0 (1.8) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 181 Vibra Trol® HSL*/HS Type - Vibration Spring Hanger Use: HS Series Spring Hangers should be utilized to minimize damaging vibration from suspended low frequency equipment (below 1200 RPM). Frequency below 600 RPM require springs with deflection 2.0” (50.8) or greater. Hangers also absorb shock and limit noise in critical areas. Features: Color-coded spring for load identification. Loads up to 1500 Lbs. (6.67 kN), deflections up to 2.10" (53.3). Spring assembly includes neoprene washer for additional noise isolation. Options available include: 30° rod swing; scale with pointer; and positioning plate or precompressed spring to hold equipment at fixed elevations (see bottom page 183). Any or all of these options must be specified. Hanger units are shipped assembled. Typical Applications: Fans, ductwork, piping, suspended ceilings, etc. To be used in-line with all thread rod for single and trapeze type support systems. Notes: Vibration hangers should not come in direct contact with equipment being suspended. Spring devices are stable with a vertical and horizontal spring constant equal to one (Kx/Ky=1). A 50% additional run-out from rated capacity to solid load is also characteristic of spring type isolators. Vibra Trol 'A' Diameter Hole Top and Bottom for Maximum 'B' Diameter Hanger Rod (Furnished By Others) 'W' 'W/2' 'L/2' 'L' Heavy Duty Hanger Box Steel Washer Neoprene Isolation Washer 'H' Stable Steel Spring 'F' *HSL Series are Lower profile. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 182 Vibra Trol® HSL*/HS Type - Vibration Spring Hanger Part No. Rated Load Dimensions in Inches Spring Color Lbs. kN HSL-1-101 Yellow 25-50 (.11-.22) 1.20" (30.5) HSL-1-102 Blue 50-100 (.22-.44) 1.20" (30.5) HSL-1-103 Brown 100-150 (.44-.67) 1.20" (30.5) HSL-1-104 Black 150-250 (.67-1.11) 1.10" (27.9) HSL-1-105 Gray 250-350 (1.11-1.55) 1.10" (25.4) HSL-1-106 Red 350-450 (1.55-2.00) 1.00" (25.4) HSL-1-107 Green 450-600 (2.00-2.67) 1.00" (25.4) HS-1-121 Black 45-90 (.20-.40) 1.40" (35.5) Spring Deflection 'L' 'W' HS-1-124 Brown 175-250 (.78-1.11) 1.30" (33.0) HS-1-125 Red 250-330 (1.11-1.47) 1.30" (33.0) HS-1-126 Purple 330-450 (1.47-2.00) 1.30" (33.0) 3" 2" (76.2) (50.8) 600-750 (2.67-3.33) 1.20" (30.5) (3.33-4.00) 1.10" (27.9) Gray 900-1100 (4.00-4.89) 1.00" (25.4) HS-1-131 Wht/Blk 1100-1300 (4.89-5.78) 1.00" (25.4) HS-1-132 Gold/Blk 1300-1500 (5.78-6.67) 0.90" (22.8) 45-90 (.20-.40) 2.00" (50.8) HS-1-130 Black HS-1-221 White 90-120 (.40-.53) 2.00" (50.8) HS-1-223 Yellow 120-175 (.53-.78) 2.00" (50.8) HS-1-224 Brown 175-250 (.78-1.11) 2.00" (50.8) 3" 2" (76.2) (50.8) Red 250-330 (1.11-1.47) 2.00" (50.8) HS-1-226 Purple 330-450 (1.47-2.00) 2.00" (50.8) HS-1-227 Blue/Blk 450-600 (2.00-2.67) 2.00" (50.8) HS-1-228 Orn/Blk 600-750 (2.67-3.33) 2.00" (50.8) HS-1-204 NA 350-500 (1.55-2.22) 2.10" (53.3) HS-1-205 NA 500-800 (2.22-3.56) 2.10" (53.3) HS-1-206 NA 800-1200 (3.56-5.34) 2.10" (53.3) (177.8) (117.5) 7" 51/8" (177.8) (130.2) 8.0 (3.6) 1" 3/4" (25.4) (19.0) 1" 3/4" (25.4) (19.0) Vibra Trol HS-1-222 HS-1-225 (3.6) 45/8" (35.5) 750-900 8.0 7" (35.5) 1.40" Pink (2.0) 5/8" (15.9) 1.40" Orange 4.5 7/8" (22.2) (.53-.78) HS-1-129 (.9) 31/8" (79.4) (.40-.53) HS-1-128 2.0 41/2" 90-120 (30.5) kg (114.3) 120-175 1.20" Lbs. 2" Green (2.00-2.67) 'B' (50.8) Yellow 450-600 'A' 23/4" HS-1-123 Blue 'F' (69.8) HS-1-122 HS-1-127 'H' Wt. Each 31/2" 2" (88.9) (50.8) 91/4" 61/2" (234.9) (165.1) 1" 3/4" (25.4) (19.0) Ordering information: Specify desired ‘option type’ after part number. Option 1 Option 2 Furnished with hanger box to accept 30° rod swing. Furnished with a scale and pointer to insure specified spring deflection. Option 3 Option 4 Furnished with a positioning plate to hold equipment at a fixed elevation during installation. Furnished with spring precompressed (75%) to hold equipment at a fixed elevation during installation. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 183 Vibra Trol® HESL*/HES Type - Combination Spring & Neoprene Vibration Hanger Use: HES Series Vibration Spring Hangers are suited to isolate both high and low frequency vibration generated by mechanical equipment. The high deflection spring addresses the vibration while the neoprene insert dampens noise. HES hangers are recommended for critical areas and with vibration sensitive spans. Features: Color-coded spring for load identification and double deflection neoprene element. Loads up to 1500 Lbs. (6.67 kN), deflections up to 2.50" (63.5). Options available include: 30° rod swing; scale with pointer; and positioning plate or pre-compressed spring to hold equipment at fixed elevations (see bottom page 185). Any or all of these options must be specified. Hanger units are shipped assembled. Typical Applications: Fan equipment, ductwork, piping, suspended ceilings, etc. To be used in-line with all thread rod for single and trapeze type support systems. Note: Vibration hangers should not come in direct contact with equipment being suspended. Spring devices are stable with a vertical and horizontal spring constant equal to one (Kx/Ky=1). A 50% additional run-out from rated capacity to solid load is also characteristic of spring type isolators. Vibra Trol 'A' Diameter Hole Top and Bottom for Maximum 'B' Diameter Hanger Rod (Furnished By Others) 'W' 'W/2' 'L/2' 'L' Heavy Duty Hanger Box Double Deflection (1/2") Molded Neoprene Element Steel Washer 'H' Stable Steel Spring 'F' *HESL Series are Lower profile. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 184 Vibra Trol® HESL*/HES Type - Combination Spring & Neoprene Vibration Hanger Dimensions in Inches Spring Color Lbs. kN HESL-1-101 Yellow 25-50 (.11-.22) 1.70" (43.2) HESL-1-102 Blue 50-100 (.22-.44) 1.70" (43.2) HESL-1-103 Brown 100-150 (.44-.67) 1.70" (43.2) HESL-1-104 Black 150-250 (.67-1.11) 1.60" (40.6) HESL-1-105 Gray 250-350 (1.11-1.55) 1.60" (40.6) HESL-1-106 Red 350-450 (1.55-2.00) 1.50" (38.1) HESL-1-107 Green 450-600 (2.00-2.67) 1.50" (38.1) HES-1-121 Black 45-90 (.20-.40) 1.90" (48.2) HES-1-122 Green 90-120 (.40-.53) 1.90" (48.2) HES-1-123 Yellow 120-175 (.53-.78) 1.90" (48.2) HES-1-124 Brown 175-250 (.78-1.11) 1.80" (45.7) HES-1-125 Red 250-330 (1.11-1.47) 1.80" (45.7) HES-1-126 Purple 330-450 (1.47-2.00) 1.80" (45.7) 31/2" 2" (88.9) (50.8) 31/2" 2" (88.9) (50.8) Spring Deflection HES-1-127 Blue 450-600 (2.00-2.67) 1.70" (43.2) HES-1-128 Orange 600-750 (2.67-3.33) 1.70" (43.2) HES-1-129 Pink 750-900 (3.33-4.00) 1.60" (40.6) HES-1-130 Gray 900-1100 (4.00-4.89) 1.50" (38.1) HES-1-131 Wht/Blk 1100-1300 (4.89-5.78) 1.50" (38.1) HES-1-132 Gold/Blk 1300-1500 (5.78-6.67) 1.40" (35.5) HES-1-221 Black 45-90 (.20-.40) 2.50" (63.5) HES-1-222 White 90-120 (.40-.53) 2.50" (63.5) HES-1-223 Yellow 120-175 (.53-.78) 2.50" (63.5) HES-1-224 Brown 175-250 (.78-1.11) 2.50" (63.5) HES-1-225 Red 250-330 (1.11-1.47) 2.50" (63.5) HES-1-226 Purple 330-450 (1.47-2.00) 2.50" (63.5) HES-1-227 Blue/Blk 450-600 (2.00-2.67) 2.50" (63.5) HES-1-228 Orn/Blk 600-750 (2.67-3.33) 2.50" (63.5) 'L' 'W' 'H' 'F' 3" 2" 7" 31/8" (76.2) (50.8) (177.8) (79.4) 91/4" 45/8" (234.9) (117.5) 91/4" 51/8" (234.9) (130.2) Wt. Each 'A' 'B' 7 5 /8" (22.2) /8" (15.9) 1" 3/4" (25.4) (19.0) 1" 34 / " (25.4) (19.0) Lbs. kg 4.0 (1.8) 11.0 (5.0) 12.0 (5.4) Ordering information: Specify desired ‘option type’ after part number. Option 1 Option 2 Furnished with hanger box to accept 30° rod swing. (Standard) Furnished with a scale and pointer to insure specified spring deflection. *HESL Series are Lower profile. Option 3 Option 4 Furnished with a positioning plate to hold equipment at a fixed elevation during installation. Furnished with spring pre-compressed (75%) to hold equipment at a fixed elevation during installation. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 185 Vibra Trol Rated Load Part No. Vibra Trol® SHE Type - Isolation Spring Hanger Use: SHE Series Isolation Hangers are general purpose vibration isolation springs. Spring isolators are used on platform and trapeze type support assemblies in non-critical areas for low frequency vibration. Features: Color-coded spring for load identification. Loads up to 1500 Lbs. (6.67 kN), deflections up to 1.40" (35.5). Spring assembly includes steel load washers with neoprene element for additional noise isolation. Spring units are shipped assembled. Larger loads available upon request. Typical Applications: Use in-line with hanger rod below strut or angle iron trapeze systems, under two rod pipe rollers, or simply beneath mounting device of suspended mechanical equipment; i.e. fans, piping, ductwork, etc. Note: Spring devices are stable with a vertical and horizontal spring constant equal to one (Kx/Ky=1). A 50% additional run-out from rated capacity to solid load is also characteristic of spring type isolators. Ceiling Vibra Trol Threaded Rod (By Contractor) I E S Q O U L I A P T M I E O N N T 'H' Free Height 'B' Diameter Maximum Hanger Rod and Lock Nut Stable Steel Spring 'A' Diameter All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 186 Vibra Trol® SHE Type - Isolation Spring Hanger Rated Load Dimensions in Inches Spring Color Lbs. kN SHE-1-101 Yellow 25-50 (.11-.22) 1.20" (30.5) SHE-1-102 Blue 50-100 (.22-.44) 1.20" (30.5) SHE-1-103 Brown 100-150 (.44-.67) 1.20" (30.5) SHE-1-104 Black 150-250 (.67-1.11) 1.10" (27.9) SHE-1-105 Gray 250-350 (1.11-1.55) 1.10" (27.9) SHE-1-106 Red 350-450 (1.55-2.00) 1.00" (25.4) SHE-1-107 Green 450-600 (2.00-2.67) 1.00" (25.4) SHE-1-121 Black 45-90 (.20-.40) 1.40" (35.5) SHE-1-122 Green 90-120 (.40-.53) 1.40" (35.5) SHE-1-123 Yellow 120-175 (.53-.78) 1.40" (35.5) SHE-1-124 Brown 175-250 (.78-1.11) 1.30" (33.0) SHE-1-125 Red 250-330 (1.11-1.47) 1.30" (33.0) SHE-1-126 Purple 330-450 (1.47-2.00) 1.30" (33.0) 2" 34 / " 45/8" (50.8) (19.0) (117.5) Spring Deflection SHE-1-127 Blue 450-600 (2.00-2.67) 1.20" (30.5) SHE-1-128 Orange 600-750 (2.67-3.33) 1.20" (30.5) SHE-1-129 Pink 750-900 (3.33-4.00) 1.10" (27.9) Gray 900-1100 (4.00-4.89) 1.00" (25.4) SHE-1-130 SHE-1-131 Wht/Blk 1100-1300 SHE-1-132 Gold/Blk 1300-1500 (5.78-6.67) 0.90" (22.8) 'A' 2" (50.8) 'B' 5 'H' /8" 33/8" (15.9) (85.7) Wt. Each Lbs. kg 1.0 (.4) 2.2 (1.0) Vibra Trol Part No. (4.89-5.78) 1.00" (25.4) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 187 Vibra Trol® Spring & Neoprene Hanger Selection B-Line Series HS and HES Spring & Neoprene Hanger selections for trapeze hung water filled piping based on 10 foot spacing between hangers. Nominal Pipe Size Weight of Pipe Filled With Water Lbs./Ft. kg/m HS Type Hanger Selection HES Type Hanger Selection 1" (25) 3 (4.4) HSL-1-101 HESL-1-101 11/4" (32) 4 (5.9) HSL-1-102 HESL-1-102 11/2" (40) 5 (7.4) HSL-1-102 HESL-1-102 2" (50) 7 (10.4) HSL-1-102 HESL-1-102 21/2" (65) 10 (14.9) HSL-1-103 HESL-1-103 3" (80) 13 (19.3) HSL-1-104 HESL-1-104 4" (100) 19 (28.3) HSL-1-104 HESL-1-104 5" (125) 27 (40.2) HSL-1-106 HESL-1-106 6" (150) 35 (52.1) HS-1-127 HES-1-127 8" (200) 56 (83.3) HS-1-128 HES-1-128 10" (250) 81 (120.5) HS-1-130 HES-1-130 12" (300) 110 (163.7) HS-1-131 HES-1-131 14" (350) 125 (186.0) HS-1-132 HES-1-132 Nominal Pipe Size Weight of Pipe Filled With Water Lbs./Ft. kg/m HS Type Hanger Selection HES Type Hanger Selection Vibra Trol 1" (25) 3 (4.4) (2) HSL-1-101 (2) HESL-1-101 11/4" (32) 4 (5.9) (2) HSL-1-101 (2) HESL-1-101 11/2" (40) 5 (7.4) (2) HSL-1-101 (2) HESL-1-101 2" (50) 7 (10.4) (2) HSL-1-101 (2) HESL-1-101 21/2" (65) 10 (14.9) (2) HSL-1-102 (2) HESL-1-102 3" (80) 13 (19.3) (2) HSL-1-102 (2) HESL-1-102 4" (100) 19 (28.3) (2) HSL-1-103 (2) HESL-1-103 5" (125) 27 (40.2) (2) HSL-1-104 (2) HESL-1-104 6" (150) 35 (52.1) (2) HS-1-124 (2) HES-1-124 8" (200) 56 (83.3) (2) HS-1-126 (2) HES-1-126 10" (250) 81 (120.5) (2) HS-1-127 (2) HES-1-127 12" (300) 110 (163.7) (2) HS-1-128 (2) HES-1-128 14" (350) 125 (186.0) (2) HS-1-129 (2) HES-1-129 The above charts are for reference only. Applicable codes require different support spans thus selection of spring hanger size may change. Calculate as follows: Wt. per Ft. (Lbs.) x Support Span = Load Requirement (Refer to hanger sizing charts) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 188 Vibra Trol® BVT Series VibraClamps® • Easy one tool installation. • Temperature Range: -40°F to +300°F • Dampens vibration and noise. • Eliminates galvanic corrosion due to metal to metal contact. • Resists most industrial oils and solvents. • Secures tubing firmly to strut channel. Design Load 1 'A' 'B' E B-LIN 150 . P. BVP ” I.P 1 1/2 Design Load 3 'C' Dimensions in Inches Part No. Copper and Steel Tubing O.D. Size Copper Tubing Size 'A' 'B' Wt. Each 'C' Lbs. kg BVT025 1/4" (6.3) 1/8" (3) 1.22" (30.9) 0.19" (4.8) 0.49" (12.4) .11 (.05) BVT037 3/8" (9.5) 1/4" (6) 1.36" (34.5) 0.25" (6.3) 0.61" (15.5) .12 (.05) BVT050 1/2" (12.7) 3/8" (10) 1.49" (37.8) 0.31" (7.8) 0.74" (18.8) .14 (.06) BVT062 5/8" (15.9) 1/2" (15) 1.62" (41.1) 0.38" (9.6) 0.86" (21.8) .15 (.07) BVT075 3/4" (19.0) 5/8" (17) 1.87" (47.4) 0.50" (12.7) 1.15" (29.2) .19 (.08) BVT087 7/8" (22.2) 3/4" (20) 2.00" (50.8) 0.56" (14.2) 1.27" (32.2) .21 (.09) BVT112 11/8" (28.6) 1" (25) 2.25" (57.1) 0.69" (17.5) 1.52" (38.6) .26 (.12) BVT137 13/8" (34.9) 11/4" (32) 2.51" (63.7) 0.81" (20.6) 1.78" (45.2) .38 (.17) BVT162 15/8" (41.3) 11/2" (40) 3.00" (76.2) 1.00" (25.4) 2.20" (55.9) .40 (.18) BVT212 21/8" (54.0) 2" (50) 3.52" (89.4) 1.25" (31.7) 2.70" (68.6) .55 (.25) BVT262 25/8" (66.6) 21/2" (65) 4.02" (102.1) 1.50" (38.1) 3.20" (81.3) .55 (.25) BVT312 31/8" (79.4) 3" (80) 4.53" (115.0) 1.75" (44.4) 3.70" (93.9) .64 (.29) BVT362 35/8" (92.1) 31/2" (90) 5.05" (128.2) 2.00" (50.8) 4.23" (107.4) .76 (.34) BVT412 41/8" (104.8) 4" (100) 5.55" (140.9) 2.25" (57.1) 4.73" (120.1) .93 (.42) BVT612 61/8" (155.5) 6" (150) 7.62" (193.5) 3.25" (82.5) 6.74" (171.1) 1.36 (.61) Part No. Design Load 1 Design Load 2 Design Load 3 Lbs. kN Lbs. kN Lbs. kN BVT025 400 (1.78) 50 (0.22) 50 (0.22) BVT037 400 (1.78) 50 (0.22) 50 (0.22) BVT050 400 (1.78) 50 (0.22) 50 (0.22) BVT062 400 (1.78) 50 (0.22) 50 (0.22) BVT075 600 (2.67) 75 (0.33) 75 (0.33) BVT087 600 (2.67) 75 (0.33) 75 (0.33) BVT112 600 (2.67) 75 (0.33) 75 (0.33) BVT137 600 (2.67) 75 (0.33) 75 (0.33) BVT162 800 (3.56) 125 (0.55) 125 (0.55) BVT212 800 (3.56) 125 (0.55) 125 (0.55) BVT262 800 (3.56) 125 (0.55) 125 (0.55) BVT312 800 (3.56) 125 (0.55) 125 (0.55) BVT362 1000 (4.45) 200 (0.67) 150 (0.67) BVT412 1000 (4.45) 200 (0.67) 150 (0.67) BVT612 1000 (4.45) 200 (0.67) 150 (0.67) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 189 Vibra Trol Design Load 2 Vibra Trol® BVP Series VibraClamps® • Easy one tool installation. • Temperature Range: -40°F to +300°F • Dampens vibration and noise. • Eliminates galvanic corrosion due to metal to metal contact. • Resists most industrial oils and solvents. • Secures pipe firmly to strut channel. Design Load 1 'A' Design Load 2 'B' E B-LIN 150 . P. BVP ” I.P 1 1/2 Design Load 3 'C' Dimensions in Inches Part No. BVP025 BVP037 Steel O.D. Size 0.540" 0.675" Nominal Pipe Size 'A' 'B' Wt. Each 'C' Lbs. kg (22.1) .15 (.07) 1.15" (29.2) .18 (.08) (13.7) 1/4" (6) 1.61" (39.9) 0.37" (9.4) 0.87" (17.1) 3/8" (10) 1.86" (47.2) 0.50" (12.7) BVP050 0.875" (22.2) 1/2" (15) 1.99" (50.5) 0.56" (14.2) 1.27" (32.3) .20 (.09) BVP075 1.050" (26.7) 3/4" (20) 2.25" (57.1) 0.69" (17.5) 1.52" (38.6) .21 (.09) BVP100 1.312" (33.3) 1" (25) 2.51" (63.8) 0.81" (20.6) 1.77" (45.0) .20 (.09) BVP125 1.660" (42.2) 11/4" (32) 3.00" (76.2) 1.00" (25.4) 2.21" (56.1) .36 (.16) BVP150 1.900" (48.3) 11/2" (40) 3.21" (81.5) 1.12" (28.4) 2.41" (61.2) .40 (.18) BVP200 2.375" (60.3) 2" (50) 3.77" (95.8) 1.37" (34.8) 2.96" (75.2) .45 (.20) BVP250 2.875" (73.0) 21/2" (65) 4.28" (108.7) 1.62" (41.1) 3.46" (87.9) .54 (.24) BVP300 3.500" (88.9) 3" (80) 5.05" (128.3) 2.00" (50.8) 4.24" (107.7) .81 (.37) BVP350 4.000" (101.6) 31/2" (90) 5.55" (140.9) 2.25" (57.1) 4.74" (120.3) .87 (.39) BVP400 4.500" (114.3) 4" (100) 6.05" (153.7) 2.50" (63.5) 5.24" (133.1) 1.09 (.49) BVP500 5.563" (141.3) 5" (125) 6.84" (173.7) 3.00" (76.2) 6.24" (158.4) 1.36 (.61) BVP600 6.625" (168.3) 6" (150) 8.24" (209.3) 3.56" (90.4) 7.36" (186.9) 1.63 (.74) Vibra Trol Part No. Design Load 1 Design Load 2 Design Load 3 Lbs. kN Lbs. kN Lbs. kN BVP025 400 (1.78) 50 (0.22) 50 (0.22) BVP037 600 (2.67) 75 (0.33) 75 (0.33) BVP050 600 (2.67) 75 (0.33) 75 (0.33) BVP075 600 (2.67) 75 (0.33) 75 (0.33) BVP100 600 (2.67) 75 (0.33) 75 (0.33) BVP125 800 (3.56) 125 (0.55) 125 (0.55) BVP150 800 (3.56) 125 (0.55) 125 (0.55) BVP200 800 (3.56) 125 (0.55) 125 (0.55) BVP250 800 (3.56) 125 (0.55) 125 (0.55) BVP300 1000 (4.45) 200 (0.89) 150 (0.67) BVP350 1000 (4.45) 200 (0.89) 150 (0.67) BVP400 1000 (4.45) 200 (0.89) 150 (0.67) BVP500 1000 (4.45) 200 (0.89) 150 (0.67) BVP600 1000 (4.45) 200 (0.89) 150 (0.67) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 190 Vibra Trol® B1999 Vibra Cushion® • • • • Ideal Isolation Material Inhibits Galvanic Corrosion Dampens Sound and Vibration Service Temperature Range -75° F (-60° C) to +375°F (-190°C) Vibra Cushion® is designed for use with refrigeration lines, HVAC, copper tubing, glass pipe and hydraulic lines. It provides an energyabsorption barrier between the lines and the mounting material and remains flexible thru its entire service range of -75°F (-60° C) to +375°F (-190°C). This elastomer allows for expansion and contraction within the mounting system and prevents galvanic reaction between dissimilar metals. Packaged 20 Ft. per carton. Note: See Strut Catalog for sizing information. ISO Iso Pipe • • • • Non-adhesive rubber tape Fuses to itself Water resistant Prevents galvanic reaction caused by dissimilar metal contact • Service Temperature Range -140° F (-95°C) to +395°F (+200°C) Vibra Trol Packaged 36 Ft. (11 M) per carton. 1” (25.4) wide .020” (0.5) thick All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 191 Dura-Blok™ Rooftop Supports Dura-Blok™ is made from 100% recycled rubber and qualifies for LEED credits. Reflective strips on both sides allow for easy product visibility. Dura-Blok Rooftop Supports Channels are through bolted on all sizes for added strength and a 1” (25.4mm) gap between blocks allows water to flow freely around longer assemblies. Product composition is not sharp or abrasive, helping to extend the roof life and no penetration through the roof is required. The Dura-Blok dampens vibration, needs no supplemental rubber pad, and will not float or blow away. Dura-Bloks can be used as pipe supports, HVAC supports, roof walkway supports, duct supports, conduit supports and cable tray supports. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 192 Dura-Blok™ Rooftop Supports Base Only DBM DBP Specifications: Base Only Dimensions - 4” High x 6” Wide x 9.6” Long (base length) Material - 100% recycled rubber, UV resistant Ultimate Load Capacity - 500 lbs. (2.22kN) (uniform load) * UPC/Part No. B-Line Cat. No. Weight Each 782051 49691 DBP 4.48 (2.03kg) 782051 50005 DBM 2.35 (1.07kg) B-Line Cat. No. Height Width Length DBP 4” (101mm) 6” (152mm) 9.6” (244mm) DBM 4” (101mm) 6” (152mm) 4.8” (122mm) * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 193 Dura-Blok Rooftop Supports Dura-Blok™ channel support is designed as an economical support for piping systems, cable tray, HVAC equipment and many other applications. The Dura-Blok is UV resistant and is suitable for any type of roofing material or other flat surfaces. Material effectively accepts screw fasteners for securing accessories. Dura-Blok™ Rooftop Supports DB - Series DB10 DB30 Specifications: Base with 14 ga. (1.9mm) Galv. Channel - 1” (25.4mm) high Dimensions - 5” (127mm) High x 6” (152mm) Wide x Length (overall length) Material - 100% recycled rubber, UV resistant Ultimate Load Capacity - (uniform load) * DB5 = 500 lbs. (2.22kN) DB10 = 500 lbs. (2.22kN) DB20 = 1,000 lbs. (4.45kN) DB30 = 1,500 lbs. (6,67kN) DB40 = 2,000 lbs. (8.89kN) DB48 = 2,500 lbs. (11.12kN) Dura-Blok™ DB-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. For sloped roofs see adjustable hinge fitting (B634). UPC/Part No. Dura-Blok Rooftop Supports B-Line Cat. No. Weight Each 782051 50035 DB5 2.75 (1.25kg) 782051 49972 DB10 5.28 (2.39kg) 782051 49974 DB20 10.63 (4.82kg) 782051 50021 DB30 15.99 (7.25kg) 782051 50022 DB40 21.34 (9.68kg) 782051 50023 DB48 26.70 (12.4kg) B-Line Cat. No. Height Width Overall Length DB20 DB5 5” (127mm) 6” (152mm) 4.8” (122mm) DB10 5” (127mm) 6” (152mm) 9.6” (244mm) DB20 5” (127mm) 6” (152mm) 20.2” (513mm) DB30 5” (127mm) 6” (152mm) 30.8” (782mm) DB40 5” (127mm) 6” (152mm) 41.4” (1052mm) DB48 5” (127mm) 6” (152mm) 52.0” (1321mm) DB5 For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 203. * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 194 Dura-Blok™ Rooftop Supports DB6 - Series DB610 DB630 Specifications: Base with 12 ga. (2.6mm) Galv. Channel - 27/16” (62mm) high Dimensions - 67/16” (163mm) High x 6” (152mm) Wide x Length (overall length) Material - 100% recycled rubber, UV resistant Ultimate Load Capacity - (uniform load) * DB610 DB620 DB630 DB640 DB648 = = = = = 500 lbs. (2.22kN) 1,000 lbs. (4.45kN) 1,500 lbs. (6.67kN) 2,000 lbs. (8.89kN) 2,500 lbs. (11.12kN) UPC/Part No. B-Line Cat. No. Weight Each 782051 50024 DB610 6.36 (2.88kg) 782051 50025 DB620 12.90 (5.85kg) 782051 50026 DB630 19.45 (8.82kg) 782051 50027 DB640 26.00 (11.79kg) 782051 50028 DB648 32.55 (14.76kg) B-Line Cat. No. Height Width Overall Length DB610 67/16” (167mm) 6” (152mm) 9.6” (244mm) DB620 67/16” (167mm) 6” (152mm) 20.2” (513mm) DB630 67/16” (167mm) 6” (152mm) 30.8” (782mm) DB640 67/16” (167mm) 6” (152mm) 41.4” (1052mm) DB648 67/16” (167mm) 6” (152mm) 52.0” (1321mm) For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 203. * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 195 Dura-Blok Rooftop Supports Dura-Blok™ DB6-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. For sloped roofs see adjustable hinge fitting (B634). Dura-Blok™ Rooftop Supports DB10 - Series DB10-36 DB10-50 Specifications: Two (2) Bases with 12 ga. (2.6mm) Galv. Channel - 15/8” (41mm) high Dimensions - 55/8” (143mm) High x 6” (152mm) Wide x Length (overall length) Material - 100% recycled rubber, UV resistant Ultimate Load Capacity - 1,000 lbs. (4.45kN) (uniform load) * Dura-Blok™ DB10-Series channel support is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. Dura-Blok Rooftop Supports UPC/Part No. B-Line Cat. No. Weight Each 782051 50029 DB10-28 13.16 (5.97kg) 782051 50031 DB10-36 14.36 (6.51kg) 782051 50032 DB10-42 15.52 (7.04kg) 782051 50033 DB10-50 16.45 (7.46kg) 782051 50034 DB10-60 17.94 (8.14kg) B-Line Cat. No. Height Individual Base Length Bridge Length DB10-28 55/8” (143mm) 9.6” (244mm) 28” (711mm) DB10-36 55/8” (143mm) 9.6” (244mm) 36” (914mm) DB10-42 55/8” (143mm) 9.6” (244mm) 42” (1067mm) DB10-50 55/8” (143mm) 9.6” (244mm) 50” (1270mm) DB10-60 55/8” (143mm) 9.6” (244mm) 60” (1524mm) For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 203. * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 196 Dura-Blok™ Rooftop Supports DBM - Series Specifications: Base with one (1) 3/8”-16 Electro Zinc All Threaded Rod and Hinged Pipe Clamp Dimensions - Height to Pipe Center x 6” (152mm) Wide x 4.8” (122mm) Long (overall length) Material - 100% recycled rubber, UV resistant Pipe Clamp Material - Malleable Iron Pipe Sizes - Electro Plated Copper Tubing Sizes - Dura Copper® Threaded Rod/Hardware - Electro Plated Steel Ultimate Load Capacity - 50 lbs. (0.22kN) (uniform load) * DBM-1 UPC/Part No. B-Line Cat. No. Clamp Part No.† Weight Each 782051 50733 DBM-1/2CT B3198HCT-1/2 2.75 (1.25kg) 782051 50734 DBM-3/4CT B3198HCT-3/4 2.76 (1.25kg) 782051 50735 DBM-1CT B3198HCT-1 2.84 (1.29kg) 782051 50736 DBM-11/4CT B3198HCT-11/2 2.95 (1.34kg) 782051 50737 DBM-11/2CT B3198HCT-11/2 2.96 (1.34kg) 782051 50738 DBM-2CT B3198HCT-2 3.03 (1.37kg) 782051 50739 DBM-1/2 B3198H-1/2 2.78 (1.26kg) 782051 50740 DBM-3/4 B3198H-3/4 2.84 (1.29kg) 782051 50741 DBM-1 B3198H-1 2.86 (1.30kg) 782051 50742 DBM-11/4 B3198H-11/4 2.93 (1.33kg) 782051 50743 DBM-11/2 B3198H-11/2 2.99 (1.36kg) 782051 50744 DBM-2 B3198H-2 3.10 (1.41kg) B-Line Cat. No. Height (Minimum) ** Height (Maximum) ** Width Length DBM-1/2CT 9.69” (246mm) 11.19” (284mm) 6” (152mm) 4.80” (122mm) DBM-3/4CT 9.84” (250mm) 11.34” (288mm) 6” (152mm) 4.80” (122mm) DBM-1CT 9.95” (253mm) 11.45” (291mm) 6” (152mm) 4.80” (122mm) DBM-11/4CT 10.13” (257mm) 11.63” (295mm) 6” (152mm) 4.80” (122mm) DBM-11/2CT 10.28” (261mm) 11.78” (299mm) 6” (152mm) 4.80” (122mm) DBM-2CT 10.53” (267mm) 12.03” (305mm) 6” (152mm) 4.80” (122mm) DBM-1/2 9.86” (250mm) 11.36” (288mm) 6” (152mm) 4.80” (122mm) DBM-3/4 10.06” (255mm) 11.56” (293mm) 6” (152mm) 4.80” (122mm) DBM-1 10.14” (257mm) 11.64 (296mm) 6” (152mm) 4.80” (122mm) DBM-11/4 10.25” (260mm) 11.75” (298mm) 6” (152mm) 4.80” (122mm) DBM-11/2 10.42” (265mm) 11.92” (303mm) 6” (152mm) 4.80” (122mm) DBM-2 10.66” (271mm) 12.16” (309mm) 6” (152mm) 4.80” (122mm) † See Pipe Hanger Catalog for dimensions and specifications. ** From bottom of rubber block to center of pipe/tubing. * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 197 Dura-Blok Rooftop Supports DBM-2CT Dura-Blok™ DBM-Series pipe/tubing support is designed for support of single piping systems where elevation adjustment is needed. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. Dura-Blok™ Rooftop Supports DB_DS - Series B + 4.5” (114mm) B Height (overall) DB2318DS A Width (overall) DB2924DS Length (overall) DB5336DS Product is shipped unassembled. Dura-Blok Rooftop Supports Specifications: Two (2) Base Supports with 12 ga. (2.6mm) Galv. Channel - 15/8” (41mm) high Riser Channels (SH Style) - 15/8” (41mm) x 15/8” (41mm) x 12 ga. (2.6mm) Fittings & Hardware - Electro-Plated Steel Dimensions - Height (overall) x Width (overall) x Length (overall) Material - 100% recycled rubber, UV resistant Ultimate Load Capacity - 1,000 lbs. (4.45kN) (uniform load) * Dura-Blok™ DB__DS-Series channel support with risers is designed for superior support of piping systems, cable tray, HVAC equipment, walkway systems and many other applications. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. For pipe straps/clamps, rollers and roller supports that can be used with these Dura-Blok supports, see page 203. * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 198 Dura-Blok™ Rooftop Supports UPC/Part No. B-Line Cat. No. A (Minimum) A (Maximum) B Weight Each 782051 50717 DB2318DS 10.56” (268mm) 20.75” (527mm) 13.50” (343mm) 33.31 (15.11kg) 782051 50718 DB2918DS 10.56” (268mm) 26.75” (679mm) 13.50” (343mm) 35.00 (15.88kg) 782051 50719 DB4118DS 10.56” (268mm) 38.75” (984mm) 13.50” (343mm) 38.40 (17.42kg) 782051 50720 DB5318DS 10.56” (268mm) 50.75” (1289mm) 13.50” (343mm) 41.80 (18.96kg) 782051 50721 DB2324DS 10.56” (268mm) 20.75” (527mm) 19.50” (495mm) 34.15 (15.49kg) 782051 50722 DB2924DS 10.56” (268mm) 26.75” (679mm) 19.50” (495mm) 35.84 (16.26kg) 782051 50723 DB4124DS 10.56” (268mm) 38.75” (984mm) 19.50” (495mm) 39.25 (17.80kg) 782051 50724 DB5324DS 10.56” (268mm) 50.75” (1289mm) 19.50” (495mm) 42.65 (19.34kg) 782051 50725 DB2336DS 10.56” (268mm) 20.75” (527mm) 31.50” (800mm) 35.84 (16.26kg) 782051 50726 DB2936DS 10.56” (268mm) 26.75” (679mm) 31.50” (800mm) 37.55 (17.03kg) 782051 50727 DB4136DS 10.56” (268mm) 38.75” (984mm) 31.50” (800mm) 40.95 (18.57kg) 782051 50728 DB5336DS 10.56” (268mm) 50.75” (1289mm) 31.50” (800mm) 44.34 (20.11kg) 782051 50729 DB2348DS 10.56” (268mm) 20.75” (527mm) 43.50” (1105mm) 37.55 (17.03kg) 782051 50730 DB2948DS 10.56” (268mm) 26.75” (679mm) 43.50” (1105mm) 39.25 (17.80kg) 782051 50731 DB4148DS 10.56” (268mm) 38.75” (984mm) 43.50” (1105mm) 42.65 (19.34kg) 782051 50732 DB5348DS 10.56” (268mm) 50.75” (1289mm) 43.50” (1105mm) 46.03 (20.88kg) B-Line Cat. No. Height (overall) Width (overall) Length (overall) DB2318DS 23” (584mm) 255/8” (651mm) 20.2” (513mm) DB2918DS 29” (736mm) 255/8” (651mm) 20.2” (513mm) 41” (1041mm) 255/8” (651mm) 20.2” (513mm) DB5318DS 53” (1346mm) 255/8” (651mm) 20.2” (513mm) DB2324DS 23” (584mm) 315/8” (803mm) 20.2” (513mm) DB2924DS 29” (736mm) 315/8” (803mm) 20.2” (513mm) 41” (1041mm) 315/8” (803mm) 20.2” (513mm) DB5324DS 53” (1346mm) 315/8” (803mm) 20.2” (513mm) DB2336DS 23” (584mm) 435/8” (1108mm) 20.2” (513mm) DB2936DS 29” (736mm) 435/8” (1108mm) 20.2” (513mm) 41” (1041mm) 435/8” (1108mm) 20.2” (513mm) DB5336DS 53” (1346mm) 435/8” (1108mm) 20.2” (513mm) DB2348DS 23” (584mm) 555/8” (1415mm) 20.2” (513mm) DB2948DS 29” (736mm) 555/8” (1415mm) 20.2” (513mm) 41” (1041mm) 555/8” (1415mm) 20.2” (513mm) 53” (1346mm) 555/8” (1415mm) 20.2” (513mm) DB4118DS DB4124DS DB4136DS DB4148DS DB5348DS A = Adjustable height from bottom of Dura-Blok to top of horizontal channel. B = Space between fittings that support horizontal channel. Height (overall) = Distance from bottom of Dura-Blok to top of upright channel. Width (overall) = Distance from outside-to-outside of Dura-Blok supports. Length (overall) = Distance from end-to-end of Dura-Blok supports. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 199 Dura-Blok Rooftop Supports DB__DS - Series cont. Dura-Blok™ Rooftop Supports DBR - Series Specifications: Base with 14 ga. (1.9mm) Galv. Channel - 1” (25.4mm) high and Pipe Roller Assembly Fixed Height Dimensions - Height to Bottom of Pipe x 6” (152mm) Wide x DBR4-6 Long (overall length) Material - 100% recycled rubber, UV resistant Pipe Roller Material - Cast Iron - Electro Plated Brackets, Axle, & Hardware - Electro Plated Steel Ultimate Load Capacity - (uniform load) * DBR2-31/2 = 500 lbs. (2.22kN) DBR4-6 = 500 lbs. (2.22kN) DBR8-10 = 1000 lbs. (4.44kN) DBR12-14 = 1000 lbs. (4.44kN) DBR16-20 = 1000 lbs. (4.44kN) Dura-Blok™ DBR-Series support is designed to support pipe where longitudinal movement is expected. The Dura-Blok is UV resistant and approved for installation on any type of roofing material or other flat surfaces. DBR16-20 Dura-Blok Rooftop Supports UPC/Part No. B-Line Cat. No. Roller Part No.† 782051 50745 DBR2-31/2 B3126-2 to 31/2 5.28 (2.39kg) 782051 50746 DBR4-6 B3126-4 to 6 10.63 (4.82kg) 782051 50747 DBR8-10 B3126-8 to 10 15.99 (7.25kg) 782051 50748 DBR12-14 B3126-12 to 14 21.34 (9.68kg) 782051 50749 DBR16-20 B3126-16 to 20 26.70 (12.11kg) B-Line Cat. No. Height ** Width Length DBR2-31/2 7.09” (180mm) 6” (152mm) 9.6” (244mm) Weight Each DBR4-6 7.09” (180mm) 6” (152mm) 9.6” (244mm) DBR8-10 8.34” (212mm) 6” (152mm) 20.2” (513mm) DBR12-14 9.38” (238mm) 6” (152mm) 20.2” (513mm) DBR16-20 9.78” (248mm) 6” (152mm) 20.2” (513mm) † See Pipe Hanger Catalog for dimensions and specifications. ** From bottom of rubber block to bottom of pipe/tubing. * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 200 Dura-Blok™ Rooftop Supports DBR - Series Adjustable Height Specifications: Base with two (2) 1/2”-13 Electro Zinc All Threaded Rod Risers and a B3114-31/2 Pipe Roll with Sockets Dimensions - Overall Height 12” (305mm) from bottom of base to pipe contact point on roller. Base - 4” High (101mm) x 6” (152mm) Wide x 9.6” (244mm) Length (base length) Material - 100% recycled rubber, UV resistant Pipe Roll & Sockets - For up to 31/2” (90mm) pipe sizes. Ultimate Load Capacity - 200 lbs. (0.89kN) * (To increase load capacity use CLDP10 load distribution plate.) Dura-Blok™ DBR-Series support is designed to support pipe up to 31/2” (90mm) nominal size where difference in elevation is required and longitudinal movement is expected. The Dura-Blok is UV resistant and approved for installation on any type of roofing material or other flat surfaces. UPC/Part No. B-Line Cat. No. Adjustable Height Width Length Weight Each 782051 50750 DBR10-12 up to 12” (305mm) 6” (152mm) 9.6” (244mm) 6.46 (2.93kg) DBE - Series Specifications: Base with two (2) 1/2”-13 Electro Zinc All Threaded Rod Risers and 14 ga. (1.9mm) Galv. Slotted Channel - 1” (25mm) high DBE10-12 Dura-Blok™ DBE-Series channel support is designed as a support of piping systems, cable tray, HVAC equipment and many other applications where elevation adjustment is critical. The Dura-Blok is UV resistant and suitable for installation on any type of roofing material or other flat surfaces. For pipe straps/clamps, rollers and roller supports that can be used with these DuraBlok supports, see page 203. UPC/Part No. B-Line Cat. No. Adjustable Height Width Channel Length Weight Each 782051 50036 DBE10-8 51/2” - 8” (140 - 203mm) 6” (152mm) 9.35” (161mm) 5.68 (2.58kg) 782051 50037 DBE10-12 51/2” - 12” (140 - 305mm) 6” (152mm) 9.35” (161mm) 5.72 (2.59kg) DBE10-16 51/2” 6” (152mm) 9.35” (161mm) 5.76 (2.61kg) 782051 50038 - 16” (140 - 406mm) ** Longer base lengths available. Note: At heights above 12” (305mm), we suggest using the DB_DS Series Channel Support with Risers for additional stability to piping system. * For Roof Loading, Consult Roofing Manufacturer or Engineer. As with most commercial roofs, the weakest point may be the insulation board beneath the rubber membrane. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 201 Dura-Blok Rooftop Supports Dimensions - Overall Height as Specified Base - 4” High (101mm) x 6” (152mm) Wide x 9.6” (244mm) Length (base length) Material - 100% recycled rubber, UV resistant Ultimate Load Capacity - 200 lbs. (0.89kN) * (To increase load capacity use CLDP10 load distribution plate.) Dura-Blok™ Rooftop Supports CLDP10 Load Distribution Plate Specifications: Steel Plate with Slots Dimensions - 15/8” (41mm) Wide x 61/2” (165mm) Long Material - 11 Ga. steel (3.0mm) Increases ultimate uniform load capacity on DBE & DBR Series supports to 500 lbs. (2.22kN) Dura-Blok™ CLDP10 load bearing stabilizer plate increases load ratings for DBE Series and DBR Series supports by allowing the load from the threaded rods to be distributed over the length of the base instead of the point load where the rods attach to the base. Loosen hex nuts and slide plate under the flat washers UPC/Part No. B-Line Cat. No. Weight Each 782051 36110 CLDP10 0.53 (0.24kg) B-Line Cat. No. Thickness Width Length CLDP10 11 Ga. (3.05mm) 15/8” (41mm) 91/2” (241mm) Retighten the hex nuts with plate in place Dura-Blok Rooftop Supports All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 202 Dura-Blok™ Rooftop Supports Compatible Components Available to make Dura-Blok bases more versatile (See Strut Systems Catalog for other products) BTS TN Nuts B22SH B22TH HHCS B634 B-LINE 50 BVP1” I.P. I.P 1 1/2 B104 B101 B379 B219 Series B2000 Series B2400 Series B479 B3126 Series Above rollers can be mounted on C-Series and CB-Series units 19” (482mm) or longer. Dura-Blok Rooftop Supports B218 BVT Series B3124 Series All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 203 Dura Clean™ Washdown Supports Dura-Clean™ electrical and mechanical support products are specifically designed for the critical and rigorous wash-down requirements of the Food & Beverage and Pharmaceutical industries. Manufactured from high quality stainless steel with all angles minimized to prevent water pooling and collection, Dura-Clean™ strut and hanger components are designed with the durability and flexibility needed for applications where pipe, conduit and enclosures are subjected to regular, high pressure, high moisture wash-down environments. Dura-Clean™ products can be installed in trapeze configurations for hanging piping, conduit or virtually any type of roof supported racking system - or wall-mount configurations for vertical or horizontal pipe support runs and enclosure support. Dura Clean All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 204 Dura Clean™ Washdown Supports Dura-Clean™ Wall Mount Rail Installation Installed Spacer Threaded Rod & Hardware Wall Mount Rail Profile Channel Profile Dura Clean Installed U-Bolt Dura-Clean™ Channel Trapeze Installation 205 Dura Clean™ Washdown Supports Dura-Clean Channels Features • Thickness: 12 Gauge (2.6mm) • Standard Lengths: 12” (.30m), 24” (.61m), 48” (1.22m), 120” (3.06m) • Standard Finish: #4 Polished 304 Stainless Steel w/cellophane cover (other materials available upon request) • Weight: 1.68 lbs/ft (2.50kg/m) • 15/8” (41mm) x 15/8” (41mm) profile with 13/32” (10mm) x 3” (76mm) slots on 4” (101mm) centers • Straight leg design does not harbor water or dust, eliminating areas known to harbor bacteria • Profile allows product to be used with standard strut accessories 1.625” (41mm) Part Number 1.625” (41mm) Length DC22S-12 DC22S-24 DC22S-48 DC22S-120 12 24 48 120 (305) (610) (1219) (3048) Section Properties Channel Weight lbs./ft. DC22S kg/m Areas of Section in.2 cm2 Moment of Inertia (I) in.4 cm4 Section Modulus (S) in.3 cm3 Y - Y Axis Radius of Gyration (R) in. cm Moment of Inertia (I) in.4 cm4 Section Modulus (S) in.3 cm3 Radius of Gyration (R) in. cm 1.68 (0.7628) 0.4829 (3.1155) 0.1328 (5.5276) 0.1283 (2.1025) 0.5244 (1.332) 0.2178 (9.0655) 0.2681 (4.3934) 0.6717 (1.7061) Channel Dura Clean DC22S DC22S DC22S DC22S DC22S DC22S DC22S DC22S DC22S X - X Axis Beam Span 12 18 24 30 36 42 48 54 60 (305) (457) (610) (762) (914) (1067) (1219) (1372) (1524) Uniform Load lbs. N 2500 1667 1250 1000 833 714 625 556 500 (562) (375) (281) (225) (187) (161) (141) (125) (112) Deflection 0.0146 0.0329 0.0584 0.0913 0.1314 0.1788 0.2337 0.2960 0.3651 (0.37) (0.83) (1.48) (2.32) (3.34) (4.54) (5.94) (7.52) (9.27) Uniform Load @ Deflection = 1/240 Span 1/360 Span lbs. N lbs. N 2500 1667 1250 1000 833 699 535 423 342 (562) 2500 1667 1250 913 634 466 357 282 228 (562) (375) (281) (225) (187) (157) (120) (95) (77) (375) (281) (205) (143) (105) (80) (63) (51) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 206 Dura Clean™ Washdown Supports Dura-Clean Wall Mount Rails Features • Thickness: 12 Gauge (2.6mm) • Standard Lengths: 12” (.30m), 24” (.61m), 48” (1.22m), 120” (3.06m) • Standard Finish: #4 Polished 304 Stainless Steel w/cellophane cover (other materials available upon request) • Weight: 1.90 lbs/ft (2.83kg/m) • Z-Profile with 13/32” (10mm) x 3” (76mm) slots on 4” (101mm) centers • DCSP spacers are used to offset profile 1” (25.4mm) from mounting surface to eliminate any area that may harbor bacteria 1.72” (44mm) 1.13” (29mm) Part Number Length 4.23” (107mm) 1.13” DCWM-12 DCWM-24 DCWM-48 DCWM-120 12 24 48 120 (305) (29mm) (610) (1219) (3048) Section Properties Channel X - X Axis Weight lbs./ft. kg/m Areas of Section in.2 cm2 Moment of Inertia (I) in.4 cm4 Section Modulus (S) in.3 cm3 Y - Y Axis Radius of Gyration (R) in. cm Moment of Inertia (I) in.4 cm4 Section Modulus (S) in.3 cm3 Radius of Gyration (R) in. cm DCWM 1.8999 (0.8618) 0.5456 (3.5200) 0.7305 (30.406) 0.3564 (5.8403) 1.1571 (2.939) 0.2345 (9.7606) 0.2646 (4.336) 0.6556 (1.6652) DCWM DCWM DCWM DCWM DCWM DCWM DCWM DCWM DCWM Beam Span 12 18 24 30 36 42 48 54 60 305 457 610 762 914 1067 1219 1372 1524 Uniform Load lbs. N 1350 900 675 540 450 386 338 300 270 (303) (202) (152) (121) (101) (87) 76 67 61 Deflection 0.0014 0.0032 0.0057 0.0090 0.0129 0.0176 0.0230 0.0290 0.0358 (0.04) (0.08) (0.15) (0.23) Dura Clean Channel (0.33) (0.45) (0.58) (0.74) (0.91) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 207 Dura Clean™ Washdown Supports U-Bolts Features • Material: Steam cleaned 304 Stainless Steel • Includes serrated flange hex nuts and flat washers • Designed for use with rigid/emt conduit, OD tubing and copper, schedule 40/80 and Ocal pipe sizes Part Number OD Tubing DC-1 DC-2 DC-3 DC-4 DC-5 DC-6 DC-7 DC-8 DC-9 DC-10 DC-11 DC-12 1/2”, 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” - Pipe - Conduit - Tubing Sizes Sch. Rigid EMT Copper 40/80 Pipe Conduit Conduit Pipe 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” 1/2” 1/2” 3/4” 3/4” 1” 11/4” 11/2” 2” 1 2 /2” 3” 31/2” 4” 1” 11/4” 11/2” 2” 21/2” 3” 31/2” 4” - Ocal Pipe “A” 1/2” 3/4” 1” 1 1 /4” 11/2” 2” 1 2 /2” 3” 31/2” 4” 0.81 0.98 1.23 1.46 1.72 1.96 2.26 2.69 3.19 3.69 4.25 4.71 “A” “B” “C” “B” (20.6) (25.0) (31.1) (37.0) (43.7) (49.8) (57.4) (68.2) (80.9) (93.6) (108.0) (119.5) 3/8”-16 Cut Threads 0.88 0.88 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 “C” (22.2) (22.2) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4) 1.50 1.67 1.91 2.15 2.41 2.65 2.95 3.38 3.88 4.38 4.88 5.33 (38.1) (42.5) (48.6) (54.5) (61.2) (67.3) (74.9) (85.7) (98.4) (111.1) (123.8) (135.4) Design Load kN lbs. kg 600 600 600 900 900 900 1200 1200 1200 1800 1800 1800 (2.67) (2.67) (2.67) (4.00) (4.00) (4.00) (5.34) (5.34) (5.34) (8.00) (8.00) (8.00) 0.13 0.14 0.16 0.19 0.29 0.22 0.25 0.28 0.33 0.37 0.41 0.45 (0.06) (0.07) (0.07) (0.08) (0.13) (0.10) (0.11) (0.13) (0.15) (0.17) (0.19) (0.20) All Threaded Rod Features • Material: Steam cleaned 304 Stainless Steel • Standard Lengths: 36” (.92m) & 72” (1.83m) (other length available upon request) 3 • /8”-16 cut threads standard • Cut threads allow the customer to cut rods to length and then field cut threads where required Length 3/8”-16 Cut Thread (both ends) 3” 3” Dura Clean 3/8” (9.5mm) (76mm) Channel Part No. Length Threads Per Inch Recommended Load lbs. N (76mm) Wt./100 pcs. lbs. kg DCR38-36 36” (914) 16 730 (324) 186.2 (84.4) DCR38-72 72” (1829) 16 730 (324) 372.4 (168.9) All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 208 Wt./C lbs. Dura Clean™ Washdown Supports Hardware Features • • • • Material: 316 Stainless Steel Flat washer for 3/8” threaded rod Serrated hex nut for 3/8”-16 threaded rod Weight Per 100: Flat Washers 1.7 lbs (0.77kg) Serrated Hex Nuts 3.0 lbs (1.36kg) Channel 3/8FWSS6 SFHN38SS6 Description 3/8” 3/8”-16 Flat Washer Serrated Hex Nut Spacers Features • Material: 304 Stainless Steel • Spacers are used to provide 1” (25mm) of separation from wall to channel, eliminating any area that may harbor bacteria. • Weight Per 100: 16.9 lbs (7.6kg) 1.000” OD (25mm) 1” (25mm) Channel Description DCSPSS4 Spacers .440” ID Other stainless steel strut products are available. See Strut Systems Catalog or Consult Cooper B-Line Customer Service for additional information. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 209 Dura Clean (11mm) KwikWire™ Accessories KwikWire The new KwikWire™ Hanging System is a flexible replacement for jack chain and all thread rod. The KwikWire™ System will slash your hanging time and the clamp can be easily adjusted by hand. Some of the key benefits of using the new KwikWire™ System include: • Installs up to 50% faster - can quickly wrap around beam with no drilling required • Simple height adjustments are made by releasing the clamp’s adjustment pin - no tools required • Aesthetic appeal - blends in with upper structural supports • Compatibility with many B-Line fastener, anchor and hanger products • Ideal for sloped ceiling applications - will support loads at up to a 60° angle from vertical Applications for the KwikWire™ Hanging System include light fixture supports, HVAC duct supports, sway bracing, sign/banner supports, wire basket cable tray supports, bus duct supports and air handling equipment supports. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 210 Adjustment Pin xxx xxxxxx xxxxxxxxxxx xxx xxxxxxxxxxxxxxxxx xxx xxxxxx xxxxxxxxxxx xxx xxxxxxxxxxxxxxxxx xxx xxxxxx xxxxxxxxxxx xxx xxxxxxxxxxxxxxxxx xxx xxxxxx xxxxxxxxxxx xxx xxxxxxxxxxxxxxxxx xxx xxxxxx xxxxxxxxxxx xxx xxxxxxxxxxxxxxxxx Installation 2”-3” Step 1 Step 2 Step 3 Step 4 Step 5 Pass the wire rope through the KwikWire™ Clamp Loop wire rope through/around support Pass wire rope back through KwikWire™ Clamp Apply tension on wire rope To adjust, remove tension and pull wire rope slightly to disengage teeth, slide adjustment pin in direction shown by arrow to release wire rope Application Photos Read safety/installation instruction sheets in packages before use. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 211 KwikWire KwikWire™ Accessories KwikWire™ Accessories Clamps KwikWire • KwikWire system replaces jack chain or ATR to support lighting, ductwork, cable tray, etc. • Can be quickly installed around beams - No drilling required. • Ideal for sloped ceilings - can hang objects at up to 60° angles. • Simple height adjustments are made by releasing locking tab, no tools required. • Spools of wire can be cut to length in field, reducing waste and up front planning. UPC/Part Number Catalog Number 782051 40719 BKC100 782051 40721 BKC150 782051 40723 BKC200 For Use With Wire Rope Diameters 1/16" & 3/32” Box Qty. (1.6 & 2.4) 100 1" (25.4) 100 1" (25.4) 50 Wire Rope 7x7 UPC/Part Number Catalog Number 782051 40725 BKW063 (1) 1/16" 782051 40727 BKW094 (1) 3/32” BKW125 (1) 1/8” BKW188 (2) 3/16” 782051 40733 782051 40734 Rope Diameter 7 x 19 Working Load Spool Qty. Lbs. kg Feet (1.6) 96 (43.5) 500 (2.4) 184 (83.4) 500 (3.2) 340 (154.2) 500 (4.8) 840 (381.0) 250 (1) Wire rope construction Type 7 x 7 (2) Wire rope construction Type 7 x 19 Uncoated Galvanized Wire Read safety/installation instruction sheets in packages before use. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 212 KwikWire KwikWire™ Accessories • B-Line KwikPak™ includes a supply of kwik clamps and a spool of wire rope. • KwikPaks are shipped in a specially designed dispenser box to ease field cutting of wire. UPC/Part Number Catalog Number 782051 40749 BKP10063 1/16” 782051 40751 BKP10094 3/32” 782051 40753 BKP15094 3/32” 782051 40759 BKP15125 1/8” 782051 40761 BKP20125 782051 40763 BKP20188 KwikWire™ Clamp Working Loads* Wire Lbs. Clamp Rope Safety Part No. Dia. Factor 5 BKC100 BKC150 BKC200 1/16” 3/32” 3/32” 1/8” 1/8” 3/16” 0-75 25-150 25-150 25-250 25-250 50-640 Kit Includes Diameter Box Lbs. kg Qty. BKC100 (100 pcs.) Ø Wire Rope (500 ft.) 1 BKC100 (100 pcs.) Ø Wire Rope (500 ft.) 1 BKC150 (100 pcs.) Ø Wire Rope (500 ft.) 1 BKC150 (100 pcs.) Ø Wire Rope (500 ft.) 1 1/8” BKC200 (50 pcs.) Ø Wire Rope (500 ft.) 1 3/16” BKC200 (50 pcs.) Ø Wire Rope (250 ft.) 1 * Working loads shown are for hanging vertically. For suspending at 15°, 30°, 45° or 60° angles from vertical use the following percentage of the working loads from the chart: 15° = 96%, 30° = 86%, 45° = 70%, 60° = 50% Read safety/installation instruction sheets in packages before use. All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 213 KwikWire™ Accessories KwikWire Accessories BKCP B601-62 BKCC UPC/Part Number Catalog Number Description Box Qty. 782051 40766 BKCP Air Duct Corner Protector 100 781011 56059 B601-62 Air Duct Support 50 782051 40297 BKCC Wire Rope Cutter 1 Danger: Never use cutters on energized circuits, wire, or cable. Note: Additional accessories include BE Series, BF Series, and BPNA Series found in Spring Steel Fastener catalog. KwikWire™ System Recommendations: • Do not exceed the safe working load of the products shown in their charts • KwikWire™ Clamp load ratings are guaranteed only when used in combination with B-Line/Cooper supplied wire rope • Do not use for overhead lifting or hoisting • Do not use if cable or components are visibly distorted or worn, remove damaged cable end prior to inserting in KwikWire™ Clamp • Do not paint cable near working area of KwikWire Clamp connector • Do not apply lubricant • Keep product clean and free of dirt • Do not use on coated wire rope • Do not use in chlorinated or caustic atmospheres • For use in dry locations • Cooper’s BKCC tool is recommended for cutting wire rope to prevent fraying All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 214 KwikWire KwikWire™ Accessories All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 215 Miscellaneous Assemblies ASSEMBLY 2 ASSEMBLY 1 B-Line Fig. B3031-3/8 B-Line Fig. B3034 B-Line Fig. B3036L Miscellaneous Assemblies B-Line Fig. B3170 B-Line Fig. B3170 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For NFPA rod sizes use B3170NF. 3. For copper tubing use copper plated or painted B3170CT, felt lined B3170F or plastic coated hangers. 4. For more secure attachment use B3367 retaining strap with B3031. ASSEMBLY 4 ASSEMBLY 3 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For NFPA rod sizes use B3170NF. 3. For copper tubing use copper plated or painted B3170CT, felt lined B3170F or plastic coated hangers. 4. For flange thicknesses greater than 3/4" use wide jaw top C-Clamp B3033. 5. For more secure attachment use B3367 retaining strap with B3034. NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For NFPA rod sizes use B3170NF. 3. For copper tubing use copper plated or painted B3170CT, felt lined B3170F or plastic coated hangers. 4. B3036L also available without locknut as B3036. 5. For more secure attachment use B3363 retaining strap with B3036L. ASSEMBLY 6 ASSEMBLY 5 B-Line Fig. B351L B-Line Fig. B3170 B-Line Fig. B3060 B-LINE FIG. B2501 B-Line Fig. B3170 B-Line Fig. B3170 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. B351L is UL Approved. 3. For NFPA rod sizes use B3170NF. 4. For copper tubing use copper plated or painted B3170CT, felt lined B3170F or plastic coated hangers. 5. For more secure attachment use B3362 retaining strap with B351. NOTES: 1. Size hanger and angle clip to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For NFPA rod sizes use B3170NF. 3. For copper tubing use copper plated or painted B3170CT, felt lined B3170F or plastic coated hangers. 216 B-Line Fig. B3170 NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For NFPA rod sizes use B3170NF. 3. For copper tubing use copper plated or painted B3170CT, felt lined B3170F or plastic coated hangers. 4. Size insert to thread size. Miscellaneous Assemblies ASSEMBLY 8 B-Line Fig. B3019 B-Line Fig. B2500 B-Line Fig. N2500 ASSEMBLY 9 Channel Nut B-Line Fig. B2505 thru B2508 B-Line Fig. B3220 B-Line Fig. B3170 B-Line Fig. B3170 NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For NFPA rod sizes use B3170NF. 3. For copper tubing use copper plated or painted B3170CT, felt lined B3170F or plastic coated hangers. 4. Size insert nut to thread size. ASSEMBLY 10 NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For NFPA rod sizes use B3170NF. 3. For copper tubing use copper plated or painted B3170CT, felt lined B3170F or plastic coated hangers. 4. B655 steel coupling nut can be substituted for B3220. ASSEMBLY 11 B-Line Fig. B3170 NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For NFPA rod sizes use B3170NF. 3. For copper tubing use copper plated or painted B3170CT, felt lined B3170F or plastic coated hangers. 4. Size insert nut to thread size. ASSEMBLY 12 B-Line Fig. B3034 B-Line Fig. B3014N B-Line Fig. B3036L B-Line Fig. B3014 B-Line Fig. B3100 B-Line Fig. B3100 B-Line Fig. B3170 NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For NFPA rod sizes use B3170NF. 3. For copper tubing use copper plated or painted B3170CT, felt lined B3170F or plastic coated hangers. 4. Size insert nut to thread size. NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use copper plated or painted B3104CT, felt lined B3100F or plastic coated B3100C hangers. 3. Hanger available in stainless steel. 4. Hanger available for AWWA ductile iron pipe, B3102. 5. For flange thicknesses greater than 3/4" use wide jaw top C-Clamp B3033. 6. For more secure attachment use B3367 retaining strap with B3034. 217 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use copper plated or painted B3104CT, felt lined B3100F or plastic coated B3100C hangers. 3. Hanger available in stainless steel. 4. Hanger available for AWWA ductile iron pipe, B3102. 5. For more secure attachment use B3363 retaining strap with B3036L. Miscellaneous Assemblies ASSEMBLY 7 Miscellaneous Assemblies ASSEMBLY 13 ASSEMBLY 14 ASSEMBLY 15 B-Line Fig. B351L B-Line Fig. B3060 Miscellaneous Assemblies B-Line Fig. B3055 B-Line Fig. B3100 B-Line Fig. B3100 B-Line Fig. B3100 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. B351L is UL Approved. 3. For copper tubing use copper plated or painted B3104CT, felt lined B3100F or plastic coated B3100C hangers. 4. Hanger available in stainless steel. 5. Hanger available for AWWA ductile iron pipe, B3102. 6. For more secure attachment use B3362 retaining strap with B351L. NOTES: 1. Size hanger and angle clip to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use copper plated or painted B3104CT, felt lined B3100F or plastic coated B3100C hangers. 3. Hanger available in stainless steel. 4. Hanger available for AWWA ductile iron pipe, B3102. ASSEMBLY 16 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use copper plated or painted B3104CT, felt lined B3100F or plastic coated B3100C hangers. 3. Hanger available in stainless steel. 4. Hanger available for AWWA ductile iron pipe, B3102. ASSEMBLY 17 B-Line Fig. B3050 ASSEMBLY 18 B-Line Fig. B3054 (Malleable Iron) B-Line Fig. B3291 thru B3298 (Forged Steel) B-Line Fig. B3200 B-Line Fig. B3100 B-Line Fig. B3100 NOTES: NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use copper plated or painted B3104CT, felt lined B3100F or plastic coated B3100C hangers. 3. Hanger available in stainless steel. 4. Hanger available for AWWA ductile iron pipe, B3102. 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use copper plated or painted B3104CT, felt lined B3100F or plastic coated B3100C hangers. 3. Hanger available in stainless steel. 4. Hanger available for AWWA ductile iron pipe, B3102. 218 B-Line Fig. B3100 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. Hanger available in stainless steel. 3. Hanger available for AWWA ductile iron pipe, B3102. Miscellaneous Assemblies ASSEMBLY 19 ASSEMBLY 20 ASSEMBLY 21 B-Line Fig. B3083WO B-Line Fig. B3083 B-Line Fig. B3200 B-Line Fig. B3100 B-Line Fig. B3100 B-Line Fig. B3100 NOTES: 1. Size hanger and beam attachment to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. Hanger available in stainless steel. 3. Hanger available for AWWA ductile iron pipe, B3102. NOTES: 1. Size hanger and beam attachment to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. Hanger available in stainless steel. 3. Hanger available for AWWA ductile iron pipe, B3102. ASSEMBLY 22 B-Line Fig. N2500 ASSEMBLY 23 ASSEMBLY 24 B-Line Fig. B3019 B-Line Fig. B2500 B-Line Fig. B3220 B-Line Fig. B3100 NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use copper plated or painted B3104CT, felt lined B3100F or plastic coated B3100C hangers. 3. Hanger available in stainless steel. 4. Hanger available for AWWA ductile iron pipe, B3102. 5. Size insert nut to thread size. B-Line Fig. B3100 NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use copper plated or painted B3104CT, felt lined B3100F or plastic coated B3100C hangers. 3. Hanger available in stainless steel. 4. Hanger available for AWWA ductile iron pipe, B3102. 5. B655 steel coupling nut can be substituted for B3220. 219 NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use copper plated or painted B3104CT, felt lined B3100F or plastic coated B3100C hangers. 3. Hanger available in stainless steel. 4. Hanger available for AWWA ductile iron pipe, B3102. 5. Size insert nut to thread size. Channel Nut B-Line Fig. B2505 thru B2508 B-Line Fig. B3100 NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use copper plated or painted B3104CT, felt lined B3100F or plastic coated B3100C hangers. 3. Hanger available in stainless steel. 4. Hanger available for AWWA ductile iron pipe, B3102. 5. Size insert nut to thread size. Miscellaneous Assemblies B-Line Fig. B2501 Miscellaneous Assemblies ASSEMBLY 25 ASSEMBLY 26 ASSEMBLY 27 B-LINE FIG. B3034 B-Line Fig. B3014N B-Line Fig. B3014 Miscellaneous Assemblies B-LINE FIG. B3036L B-LINE FIG. B3690 B-Line Fig. B3100 NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use copper plated or painted B3104CT, felt lined B3100F or plastic coated B3100C hangers. 3. Hanger available in stainless steel. 4. Hanger available for AWWA ductile iron pipe, B3102. 5. Size insert nut to thread size. ASSEMBLY 28 B-LINE FIG. B3690 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use felt lined B3690F or plastic coated B3690C hangers. 3. For flange thicknesses greater than 3/4" use wide jaw top C-Clamp B3033. 4. For more secure attachment use B3367 retaining strap with B3034. NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use felt lined B3690F or plastic coated B3690C hangers. 3. For more secure attachment use B3363 retaining strap with B3036L. ASSEMBLY 29 ASSEMBLY 30 B-Line Fig. B3060 B-Line Fig. B351L B-Line Fig. B3050 B-Line Fig. B3690 B-Line Fig. B3690 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use felt lined B3690F or plastic coated B3690C hangers. 3. B351L is UL Approved. 4. For more secure attachment use B3362 retaining strap with B351L. NOTES: 1. Size hanger and angle clip to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use felt lined B3690F or plastic coated B3690C hangers. 220 B-Line Fig. B3200 B-Line Fig. B3690 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use felt lined B3690F or plastic coated B3690C hangers. Miscellaneous Assemblies ASSEMBLY 32 B-Line Fig. B2501 ASSEMBLY 33 B-Line Fig. B3019 B-Line Fig. B2500 B-Line Fig. N2500 B-Line Fig. B3220 B-Line Fig. B3690 B-Line Fig. B3690 B-Line Fig. B3690 NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use felt lined B3690F or plastic coated B3690C hangers. 3. Size insert nut to thread size. NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use felt lined B3690F or plastic coated B3690C hangers. 3. Size insert nut to thread size. NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use felt lined B3690F or plastic coated B3690C hangers. 3. B655 steel coupling nut can be substituted for B3220. ASSEMBLY 34 ASSEMBLY 35 ASSEMBLY 36 B-Line Fig. B3031-3/8 Channel Nut B-Line Fig. B2505 thru B2508 B-Line Fig. B3014 B-Line Fig. B3014N B-Line Fig. B3106 B-Line Fig. B3690 B-Line Fig. B3690 B-Line Fig. B3106V NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use felt lined B3690F or plastic coated B3690C hangers. 3. Size insert nut to thread size. NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use felt lined B3690F or plastic coated B3690C hangers. 3. Size insert nut to thread size. 221 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. B3106V is used in conjunction with B3106 to continuously support plastic pipe or other flexible pipe system. 3. For more secure attachment use B3367 retaining strap with B3031. Miscellaneous Assemblies ASSEMBLY 31 Miscellaneous Assemblies ASSEMBLY 37 ASSEMBLY 38 ASSEMBLY 39 B-Line Fig. B3034 B-Line Fig. B351L B-Line Fig. B3036L Miscellaneous Assemblies B-Line Fig. B3106 B-Line Fig. B3106 B-Line Fig. B3106 B-Line Fig. B3106V B-Line Fig. B3106V B-Line Fig. B3106V NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. B3106V is used in conjunction with B3106 to continuously support plastic pipe or other flexible pipe system. 3. For flange thicknesses greater than 3/4" use wide jaw top C-Clamp B3033. 4. For more secure attachment use B3367 retaining strap with B3034. NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. B3106V is used in conjunction with B3106 to continuously support plastic pipe or other flexible pipe system. 3. For more secure attachment use B3363 retaining strap with B3036L. NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. UL & FM Approved. 3. B3106V is used in conjunction with B3106 to continuously support plastic pipe or other flexible pipe system. 4. For more secure attachment use B3362 retaining strap with B351L. ASSEMBLY 40 ASSEMBLY 41 ASSEMBLY 42 B-Line Fig. B3036 B-Line Fig. B2501 B-Line Fig. B3106 B-Line Fig. B3106 B-Line Fig. B3106V NOTES: 1. Size hanger and angle clip to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. B3106V is used in conjunction with B3106 to continuously support plastic pipe or other flexible pipe system. B-Line Fig. B3106V NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. B3106V is used in conjunction with B3106 to continuously support plastic pipe or other flexible pipe system. 3. Size insert to thread size. 222 B-Line Fig. N2500 B-Line Fig. B2500 B-Line Fig. B3106 B-Line Fig. B3106V NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. B3106V is used in conjunction with B3106 to continuously support plastic pipe or other flexible pipe system. 3. Size insert nut to thread size. Miscellaneous Assemblies ASSEMBLY 44 B-Line Fig. B3019 B-Line Fig. B3220 Channel Nut ASSEMBLY 45 B-Line Fig. B2505 thru B2508 B-Line Fig. B3106 B-Line Fig. B3014N B-Line Fig. B3014 B-Line Fig. B3106 B-Line Fig. B3106 B-Line Fig. B3106V B-Line Fig. B3106V B-Line Fig. B3106V NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. B3106V is used in conjunction with B3106 to continuously support plastic pipe or other flexible pipe system. 3. B655 steel coupling nut can be substituted for B3220. NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. B3106V is used in conjunction with B3106 to continuously support plastic pipe or other flexible pipe system. 3. Size channel nut to thread size. NOTES: 1. Size hanger and concrete insert to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. B3106V is used in conjunction with B3106 to continuously support plastic pipe or other flexible pipe system. 3. Size insert nut to thread size. ASSEMBLY 46 ASSEMBLY 47 ASSEMBLY 48 B-Line Fig. B3050 B-Line Fig. B3055 B-Line Fig. B3200 B-Line Fig. B3110 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. If used with insulated pipe, size hanger properly and use insulation shields for cold lines and protection saddles for hot lines. B-Line Fig. B3110 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. If used with insulated pipe, size hanger properly and use insulation shields for cold lines and protection saddles for hot lines. 223 B-Line Fig. B3054 (Malleable Iron) B-Line Fig. B3110 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. If used with insulated pipe, size hanger properly and use insulation shields for cold lines and protection saddles for hot lines. Miscellaneous Assemblies ASSEMBLY 43 Miscellaneous Assemblies ASSEMBLY 49 ASSEMBLY 50 ASSEMBLY 51 B-Line Fig. B3083WO Miscellaneous Assemblies B-Line Fig. B3291 thru B3298 (Forged Steel) B-Line Fig. B3083 B-Line Fig. B3200 B-Line Fig. B3110 B-Line Fig. B3110 B-Line Fig. B3110 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. If used with insulated pipe, size hanger properly and use insulation shields for cold lines and protection saddles for hot lines. NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. If used with insulated pipe, size hanger properly and use insulation shields for cold lines and protection saddles for hot lines. NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. If used with insulated pipe, size hanger properly and use insulation shields for cold lines and protection saddles for hot lines. ASSEMBLY 52 ASSEMBLY 53 Channel Nut B-Line Fig. B2505 thru B2508 B-Line Fig. B3014 B-Line Fig. B3014N B-Line Fig. B3110 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. If used with insulated pipe, size hanger properly and use insulation shields for cold lines and protection saddles for hot lines. ASSEMBLY 54 B-Line Fig. B3110 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. If used with insulated pipe, size hanger properly and use insulation shields for cold lines and protection saddles for hot lines. 224 B-Line Fig. B3055 B-Line Fig. B3200 B-Line Fig. B3140 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For heavy-duty applications use B3142. 3. Use with non-insulated pipe. 4. For vertical adjustment use with turnbuckle B3202. Miscellaneous Assemblies ASSEMBLY 56 B-Line Fig. B3050 B-Line Fig. B3200 B-Line Fig. B3140 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For heavy-duty applications use B3142. 3. Use with non-insulated pipe. 4. For vertical adjustment use with turnbuckle B3202. ASSEMBLY 58 ASSEMBLY 57 B-Line Fig. B3054 (Malleable Iron) B-Line Fig. B3200 B-Line Fig. B3140 B-Line Fig. B3140 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For heavy-duty applications use B3142. 3. Use with non-insulated pipe. NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For heavy-duty applications use B3142. 3. Use with non-insulated pipe. 4. For vertical adjustment use with turnbuckle B3202. ASSEMBLY 59 ASSEMBLY 60 B-Line Fig. B3083 B-Line Fig. B3083WO B-Line Fig. B3200 B-Line Fig. B3200 B-Line Fig. B3200 B-Line Fig. B3291 thru B3298 (Forged Steel) B-Line Fig. B3140 B-Line Fig. B3140 B-Line Fig. B3055 B-Line Fig. B3200 B-Line Fig. B3144 Insulation NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For heavy-duty applications use B3142. 3. Use with non-insulated pipe. NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For heavy-duty applications use B3142. 3. Use with non-insulated pipe. 4. For vertical adjustment use with turnbuckle B3202. 225 NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For heavy-duty applications use B3142. 3. Can be used with insulated pipe. 4. For vertical adjustment use with turnbuckle B3202. Miscellaneous Assemblies ASSEMBLY 55 Miscellaneous Assemblies ASSEMBLY 61 ASSEMBLY 62 ASSEMBLY 63 Miscellaneous Assemblies B-Line Fig. B3200 B-Line Fig. B3200 B-Line Fig. B3200 B-Line Fig. B3144 B-Line Fig. B3144 Insulation Insulation NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For heavy-duty applications use B3146. 3. Can be used with insulated pipe. 4. For vertical adjustment use with turnbuckle B3202. NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For heavy-duty applications use B3146. 3. Can be used with insulated pipe. ASSEMBLY 64 B-Line Fig. B3144 Insulation NOTES: 1. Size hanger and clamp to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For heavy-duty applications use B3146. 3. For vertical adjustment use with turnbuckle B3202. ASSEMBLY 65 B-Line Fig. B3083WO B-Line Fig. B3200 B-Line Fig. B3291 thru B3298 (Forged Steel) B-Line Fig. B3054 (Malleable Iron) B-Line Fig. B3050 B-Line Fig. B3200 B-Line Fig. B3144 B-Line Fig. B3083 B-Line Fig. B3144 Insulation Insulation NOTES: 1. Size hanger and beam attachment to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For heavy-duty applications use B3146. 3. Can be used with insulated pipe. 4. For vertical adjustment use with turnbuckle B3202. NOTES: 1. Size hanger and beam attachment to adequarely support load (refer to Cooper B-Line pipe hanger catalog). 2. For heavy-duty applications use B3146. 3. Can be used with insulated pipe. 226 Miscellaneous Assemblies ASSEMBLY 66 Miscellaneous Assemblies B-Line Fig. B3100 Calcium Silicate Shield NOTES: 1. Size hanger to adequately support load (refer to Cooper B-Line Pipe Hanger Catalog). 2. Size Calcium Silicate Shield to fit pipe and insulation thickness. 3. Size hanger to fit Silicate Shields. ASSEMBLY 68 ASSEMBLY 67 B-Line Fig. B3110 B-Line Fig. B3160 thru B3165 B-Line Fig. B3160 thru B3165 B-Line Fig. B3114 NOTES: 1. Size roller to adequately support load (refer to Cooper B-Line pipe hanger catalog). 2. Size B3160 thru B3165 to pipe size and insulation thickness. 3. Use insulation shields for cold lines and protection saddles for hot lines. NOTES: 1. Size roller to adequately support load (refer to Cooper B-Line pipe hanger catalog). 2. Size B3160 thru B3165 to pipe size and insulation thickness. 3. Use insulation shields for cold lines and protection saddles for hot lines. 227 Miscellaneous Assemblies ASSEMBLY 69 ASSEMBLY 70 ASSEMBLY 71 B-Line Fig. B3373 Miscellaneous Assemblies B-Line Fig. B3093 B-Line Fig. B3092 NOTES: 1. Size clamp to adequately support load (refer to Cooper B-Line pipe hanger catalog). 2. For copper tubing use copper plated or painted B3373CT or plastic coated B3373C clamps. 3. Hanger available in stainless steel, B3373SS4. ASSEMBLY 72 B-Line Fig. B3088T B-Line Fig. B3088T NOTES: 1. Size stand to adequately support load (refer to Cooper B-Line pipe hanger catalog). 2. For floor support of horizontal pipe where vertical adjustment is required. NOTES: 1. Size stand to adequately support load (refer to Cooper B-Line pipe hanger catalog). 2. For floor support of horizontal pipe where vertical adjustment is required. ASSEMBLY 73 ASSEMBLY 74 Metal Framing Strut B-Line Fig. B3064 Series B-Line Fig. B3066 Series B-Line Fig. B494 Series (Strut Catalog) NOTES: 1. Size bracket to properly support load (refer to Cooper B-Line Strut Catalog). NOTES: 1. Size bracket to properly support load (refer to Cooper B-Line Strut Catalog). 228 NOTES: 1. Size bracket to properly support load (refer to Cooper B-Line Strut Catalog). 2. For heavier loads use B-Line Fig. B3067. Miscellaneous Assemblies ASSEMBLY 75 ASSEMBLY 76 ASSEMBLY 77 B-Line Fig. B3281 thru B3287 Miscellaneous Assemblies B-Line Fig. B3160 thru B3165 B-Line Fig. B3117SL B-Line Fig. B3891 NOTES: 1. Size roller to adequately support load (refer to Cooper B-Line pipe hanger catalog). 2. Size B3160 thru B3165 to pipe size and insulation thickness. 3. B3117SL may also be welded to structure. 4. Use insulation shields for cold lines and protection saddles for hot lines. ASSEMBLY 78 B-Line Fig. B3892 NOTES: 1. B3892 is designed for longitudinal movement only. 2. Teflon® Slide Plate included. NOTES: 1. B3281 thru B3287 pipe alignment guides should be installed with pipe supports so they do not carry any load. 2. Pipe alignment guides can be bolted or welded to supporting structure. ASSEMBLY 79 B-Line Fig. B3893 NOTES: 1. B3893 is designed for longitudinal movement only. 2. Teflon® Slide Plate included. 229 NOTES: 1. B3891 is designed for longitudinal movement only. 2. Teflon® Slide Plate included. ASSEMBLY 80 B-Line Fig. B3894 NOTES: 1. B3894 is designed for longitudinal and limited transverse movement. 2. Teflon® Slide Plate included. Miscellaneous Assemblies ASSEMBLY 81 ASSEMBLY 82 ASSEMBLY 83 Miscellaneous Assemblies B-Line Fig. B3895 P. 102 NOTES: 1. B3895 is designed for longitudinal and limited transverse movement. 2. Teflon® Slide Plate included. B-Line Fig. B3896 P. 102 NOTES: 1. B3896 is designed for longitudinal and limited transverse movement. 2. Teflon® Slide Plate included. 230 B-Line Fig. B3897 P. 102 NOTES: 1. B3897 is designed for up to 5 inches of horizontal movement in any direction, depending on the installed position. 2. Teflon® Slide Plate included. Miscellaneous Assemblies ASSEMBLY 84 ASSEMBLY 85 B-Line Fig. B3160 thru B3165 ASSEMBLY 86 B-Line Fig. B3126 B-Line Fig. B2400 Series (Strut Catalog) B-Line Fig. B3160 thru B3165 B-Line Fig. B22SH (Strut Catalog) Miscellaneous Assemblies B-Line Fig. B218 (Strut Catalog) Channel Nut B-Line Fig. B22SH (Strut Catalog) NOTES: 1. Size strut to adequarely support load (refer to Cooper B-Line strut catalog). 2. Use B218 For 1/2" thru 8" Pipe. For latger pipe use B219, B379 or B479. 3. Size B3160 thru B3165 to pipe size and insulation thickness. 4. Use insulation shields for cold lines and protection saddles for hot lines. NOTES: 1. Size strut and roller to adequarely support load (refer to Cooper B-Line strut catalog). 2. Size B3160 thru B3165 to pipe size and insulation thickness. 3. B3126 may also be welded to structure. 4. Use insulation shields for cold lines and protection saddles for hot lines. ASSEMBLY 87 Channel Nut Channel Nut B-Line Fig. B22SH (Strut Catalog) B-Line Fig. B22SH (Stut Catalog) NOTES: 1. Size strut and clamp to adequarely support load (refer to Cooper B-Line strut catalog). 2. Strut available in Dura-Green® epoxy painted, Galvanized, Hot-Dip Galvanized, PVC Coated, Stainless Steel and Aluminum. ASSEMBLY 88 B-Line Fig. B2000 Series (Strut Catalog) B-Line Fig. B2000 Series (Strut Catalog) Calcium Silicate Shield B-Line Fig. B200 Series P. 59 (Strut Catalog) B-Line Fig. B200 Series P. 59 (Strut Catalog) B-Line Fig. B22SH P. 40 (Strut Catalog) B-Line Fig. B22SH P. 40 (Strut Catalog) NOTES: 1. Size strut and clamp to adequarely support load (refer to Cooper B-Line strut catalog). 2. B2000 available in Zinc Plated, Hot-Dip Galvanized, PVC Coated, Dura-Copper® epoxy painted, Stainless Steel and Aluminum. 3. Strut available in Dura-Green® epoxy painted, Galvanized, Hot-Dip Galvanized, PVC Coated, Stainless Steel and Aluminum. NOTES: 1. Size B22SH to adequarely support load (refer to Cooper B-Line strut catalog). 2. Size B2000 Series to fit Calcium Silicate Shield. 3. Size Calcium Silicate Shield to fit pipe and insulation thickness. 231 Miscellaneous Assemblies ASSEMBLY 89 ASSEMBLY 90 B-Line Fig. B2000 Series (Strut Catalog) B-Line Fig. B1999 (Strut Catalog) B-Line Fig. B2417 Series (Strut Catalog) Miscellaneous Assemblies B-Line Fig. B200 Series (Strut Catalog) B-Line Fig. B200 Series (Strut Catalog) B-Line Fig. B22SH (Strut Catalog) B-Line Fig. B22SH (Strut Catalog) NOTES: 1. Size strut and clamp to adequarely support load (refer to Cooper B-Line strut catalog). 2. B2000 available in Zinc Plated, Hot-Dip Galvanized, PVC Coated, Dura-Copper® epoxy painted, Stainless Steel and Aluminum. 3. Strut available in Dura-Green® epoxy painted, Galvanized, Hot-Dip Galvanized, PVC Coated, Stainless Steel and Aluminum. 4. Vibra Cushion is designed to isolate and dampen vibration of HVAC, refrigeration lines, copper tubing, glass pipe and hydraulic lines. NOTES: 1. Size strut and clamp to adequarely support load (refer to Cooper B-Line strut catalog). 2. B2417 permits movement along length of pipe. 3. Strut available in Dura-Green® epoxy painted, Galvanized, Hot-Dip Galvanized, PVC Coated, Stainless Steel and Aluminum. ASSEMBLY 91 ASSEMBLY 92 B-Line Fig. BVT025 thru BVT412 (Strut Catalog) B-Line Fig. B22 or B24 B-Line Fig. B200 Series (Strut Catalog) B-Line Fig. B22SH (Strut Catalog) NOTES: 1. Size strut and clamp to adequarely support load (refer to Cooper B-Line strut catalog). 2. BVT Series aavailable in Yellow Zinc Chromate. 3. Strut available in Dura-Green® epoxy painted, Galvanized, Hot-Dip Galvanized, PVC Coated, Stainless Steel and Aluminum. 4. VibraClamp is designed to isolate and dampen vibration of HVAC, refrigeration lines, copper tubing, glass pipe and hydraulic lines. B-Line Fig. B613 I-Beam NOTES: 1. Use B613 to mount strut between flanges of I-Beam. 2. B613 for use with B22 or B24 strut. 3. Use B613A for B52 and B54 strut. 232 Miscellaneous Assemblies ASSEMBLY 93 B-Line Part # B107 Miscellaneous Assemblies B-Line Part # B103 B-Line Part # B103 B-Line Part # B22 Channel 15/8" X 15/8" X 12 ga. steel minimum B-Line Part # B22A Channel B-Line Part # B2000 Series Pipe Clamps B-Line Part # B2400 Series Pipe Straps B-Line Part # B3126 Series Pipe Roller B-Line Part # B844 B-Line Part # B281 Post Base B-Line Part # B32-I Continuous Concrete Insert NOTES: 1. Size all applicable parts to adequately support load (refer to Strut Systems catalog). 2. Strut available in Dura-Green® epoxy painted, Pre-Galvanized, Hot-Dip Galvanized, PVC Coated, Stainless Steel and Aluminum. 3. B2000 available in Zinc Plated, Hot-Dip Galvanized, PVC Coated, Dura-Copper® epoxy painted, Stainless Steel and Aluminum. 4. B2400 is UL Approved. 5. All channels and fittings shall be assembled using 1/2" bolts and channel nuts (B-Line Part # N225) with an applied torque of 50 Ft.-Lbs. 233 Seismic Assemblies CLEVIS HANGER TRANSVERSE BRACING Single Pipe Bracing Pipe Size ATR All Threaded Rod Miscellaneous Assemblies Rod Stiffener 1 (Min.) B-Line Channel Transverse Brace 1 B335-2-Bolt Size Adjustable Hinge B3100PS Pipe Sleeve Adjustable Hinge Part No. Pipe Sleeve Part No.* N/A in. (mm) Clevis Hanger Part No. 1/2" (15) B3100-1/2 N/A 3/4" (20) B3100-3/4 N/A N/A 1" (25) B3100-1 B335-2-3/8 B3100PS-1 11/4" (32) B3100-11/4 B335-2-3/8 B3100PS-11/4 11/2" (40) B3100-11/2 B335-2-3/8 B3100PS-11/2 2" (50) B3100-2 B335-2-3/8 B3100PS-2 21/2" (65) B3100-21/2 B335-2-3/8 B3100PS-21/2 3" (80) B3100-3 B335-2-3/8 B3100PS-3 31/2" (90) B3100-31/2 B335-2-3/8 B3100PS-31/2 4" (100) B3100-4 B335-2-3/8 B3100PS-4 B3100PS-5 B3100PS-6 5" (125) B3100-5 B335-2-1/2 6" (150) B3100-6 B335-2-1/2 8" (200) B3100-8 B335-2-5/8 B3100PS-8 10" (250) B3100-10 B335-2-3/4 B3100PS-10 12" (300) B3100-12 B335-2-3/4 B3100PS-12 * Not included when ordering standard B3100 Series Clevis Hanger. B3100 Series Clevis Hanger Notes: Pipe sleeve required over cross bolt of Clevis Hanger when using the brace connection shown above. "J" HANGER TRANSVERSE BRACING Single Pipe Bracing Rod Stiffener May Be Required 1 Min. Pipe Size 1 ATR All Threaded Rod B-Line Channel Transverse Brace B335-2-Bolt Size Adjustable Hinge B3690 Series 'J' Hanger 234 Adjustable Hinge Part No. N/A in. (mm) "J" Hanger Part No. 1/2" (15) B3690-1/2 3/4" (20) B3690-3/4 N/A 1" (25) B3690-1 B335-2-3/8 11/4" (32) B3690-11/4 B335-2-3/8 11/2" (40) B3690-11/2 B335-2-3/8 2" (50) B3690-2 B335-2-3/8 21/2" (65) B3690-21/2 B335-2-1/2 3" (80) B3690-3 B335-2-1/2 31/2" (90) B3690-31/2 B335-2-1/2 4" (100) B3690-4 B335-2-1/2 5" (125) B3690-5 B335-2-1/2 6" (150) B3690-6 B335-2-1/2 8" (200) B3690-8 B335-2-1/2 Seismic Assemblies PIPE CLAMP TRANSVERSE BRACING Single Pipe Bracing ATR All Threaded Rod 1 (Min.) B-Line Channel Transverse Brace Pipe Size 1 B3200 Series Weldless Eye Nut B335-2-Bolt Size Adjustable Hinge Adjustable Hinge Part No. B335-2-1/2 in. (mm) Pipe Clamp * Part No. 11/2" (40) B3144-11/2 2" (50) B3144-2 B335-2-1/2 21/2" (65) B3144-21/2 B335-2-1/2 3" (80) B3144-3 B335-2-1/2 4" (100) B3144-4 B335-2-5/8 5" (125) B3144-5 B335-2-5/8 6" (150) B3144-6 B335-2-3/4 8" (200) B3144-8 B335-2-3/4 10" (250) B3144-10 B335-2-3/4 12" (300) B3144-12 B335-2-3/4 Adjustable Hinge Part No. B3144 Series Double Bolt Pipe Clamp PIPE ROLLER TRANSVERSE BRACING Single Pipe Bracing ATR All Threaded Rod Rod Stiffener 1 (Min.) Pipe Size B-Line Channel Transverse Brace 1 B335-2-Bolt Size Adjustable Hinge B3110 Series Adjustable Steel Yoke Pipe Roll 235 in. (mm) Pipe Roller Part No. 21/2" (65) B3110-21/2 B335-2-1/2 3" (80) B3110-3 B335-2-1/2 31/2" (90) B3110-21/2 B335-2-1/2 4" (100) B3110-4 B335-2-1/2 5" (125) B3110-5 B335-2-5/8 6" (150) B3110-6 B335-2-3/4 Miscellaneous Assemblies Rod Stiffener May Be Required Seismic Assemblies LONGITUDINAL BRACING Single Pipe Bracing Rod Stiffener May Be Required in. (mm) Pipe Clamp* Part No. 1" (25) B3140-1 B335V-1/2 B3373-1 B335V-1/2 (32) B3140-11/4 B335V-1/2 B3373-11/4 B335V-1/2 (40) B3140-11/2 B335V-1/2 B3373-11/2 B335V-1/2 B3373-2 B335V-1/2 B3373-21/2 B335V-1/2 Pipe Size Miscellaneous Assemblies B335V-Bolt Size Adjustable Half Hinge 11/4" 11/2" B-Line Channel Longitudinal Brace Pipe Hanger or Support B3140 Pipe Clamp or B3373 Riser Clamp Series 4” max. (101mm) Adjustable Half Hinge Part No. Riser Clamp * Part No. Adjustable Half Hinge Part No. (50) B3140-2 B335V-1/2 21/2" (65) B3140-21/2 B335V-1/2 2" 3" (80) B3140-3 B335V-1/2 B3373-3 B335V-1/2 31/2" (90) B3140-31/2 B335V-1/2 B3373-31/2 B335V-1/2 4" (100) B3140-4 B335V-5/8 B3373-4 B335V-1/2 5" (125) B3140-5 B335V-5/8 B3373-5 B335V-1/2 6" (150) B3140-6 B335V-3/4 B3373-6 B335V-1/2 B3373-8 B335V-5/8 8" (200) B3140-8 B335V-3/4 10" (250) -- -- B3373-10 B335V-5/8 12" (300) -- -- B3373-12 B335V-5/8 CLEVIS HANGER TRANSVERSE BRACING Single Pipe Bracing - Copper Tubing Copper Tubing Size ATR All Threaded Rod (mm) (15) B3104CT-1/2 N/A 3/4" (20) B3104CT-3/4 N/A N/A 1" (25) B3104CT-1 B335-2-3/8 B3104CTPS-1 11/4" (32) B3104CT-11/4 B335-2-3/8 B3104CTPS-11/4 (40) B3104CT-11/2 B335-2-3/8 B3104CTPS-11/2 B3104CTPS-2 B3104CTPS-21/2 11/2" 2" (50) B3104CT-2 B335-2-3/8 21/2" (65) B3104CT-21/2 B335-2-3/8 3" (80) B3104CT-3 B335-2-3/8 B3104CTPS-3 31/2" (90) B3104CT-31/2 B335-2-3/8 B3104CTPS-31/2 4" (100) B3104CT-4 B335-2-3/8 B3104CTPS-4 B335-2-Bolt Size Adjustable Hinge B3104CTPS Pipe Sleeve B3104CT Series Clevis Hanger N/A in. 1 (Min.) B-Line Channel Transverse Brace Pipe Sleeve Part No.* 1/2" Rod Stiffener 1 Adjustable Hinge Part No. Clevis Hanger Part No. * Not included when ordering standard B3104CT Series Clevis Hanger. Notes: Pipe sleeve required over cross bolt of Clevis Hanger when using the brace connection shown above. 236 Seismic Assemblies LONGITUDINAL BRACING Single Pipe Bracing - Copper Tubing Copper Tubing Size B335V-Bolt Size Adjustable Half Hinge B-Line Channel Longitudinal Brace Pipe Hanger or Support 4” max. (101mm) Riser Clamp * Part No. Adjustable Half Hinge Part No. in. (mm) 1" (25) B3373CT-1 B335V-1/2 11/4" (32) B3373CT-11/4 B335V-1/2 11/2" (40) B3373CT-11/2 B335V-1/2 2" (50) B3373CT-2 B335V-1/2 21/2" (65) B3373CT-21/2 B335V-1/2 3" (80) B3373CT-3 B335V-1/2 31/2" (90) B3373CT-31/2 B335V-1/2 4" (100) B3373CT-4 B335V-1/2 B3373CT Riser Clamp Series TRAPEZE TRANSVERSE AND LONGITUDINAL BRACING B335-2-Bolt Size Adjustable Hinge B-Line Channel Longitudinal Brace ATR All Threaded Rod Rod Stiffener 1 B2400 Series Pipe Straps 1 (Min.) B-Line Channel Transverse Brace B-Line Channel Transverse Brace B335-2-1/2 Adjustable Hinge Transverse Brace B-Line Channel - Size as Required B335-2-1/2 Adjustable Hinge Longitudinal Brace Hex Nut & Square Washer B2000 Series Pipe Straps 237 Miscellaneous Assemblies Rod Stiffener May Be Required Seismic Assemblies TRAPEZE TRANSVERSE AND LONGITUDINAL BRACING B335-2-Bolt Size Adjustable Hinge B-Line Channel Longitudinal Brace ATR All Threaded Rod Miscellaneous Assemblies Rod Stiffener 1 Cable Tray 1 (Min.) B-Line Channel Transverse Brace B-Line Channel Transverse Brace B335-2-1/2 Adjustable Hinge Transverse Brace B335-2-1/2 Adjustable Hinge Longitudinal Brace Hex Nut & Square Washer B-Line Channel - Size as Required B2000 Series Pipe Straps B2400 Series Pipe Straps TRAPEZE TRANSVERSE AND LONGITUDINAL BRACING B-Line Channel Longitudinal Brace ATR All Threaded Rod Rod Stiffener 1 B2400 Series Pipe Straps 1 (Min.) B-Line Channel Transverse Brace B-Line Channel Size as Required B335-2-1/2 Adjustable Hinge Longitudinal Brace B2000 Series Pipe Straps 238 Hex Nut & Square Washer Reference Data - Metric Conversion Chart To Multiply By To Convert From Angle degree radian (rad) radian (rad) degree 1.745329 x 10-2 5.729578 x 10+1 Area foot2 inch2 circular mil sq. centimeter (cm2) square meter (m2) square meter (m2) square meter (m2) square meter (m2) square meter (m2) square meter (m2) square inch (in2) foot2 inch2 circular mil 9.290304 6.451600 5.067075 1.550003 1.076391 1.550003 1.973525 Temperature degree Fahrenheit degree Celsius Force pounds-force (lbf) Length foot (ft) inch (in) mil inch (in) meter (m) meter (m) meter (m) micrometer (µm) 10-2 10-4 10-10 10-1 10+1 10+3 10+9 newtons (N) S (m3) I (m4) E (Pa) To meter (m3) meter (m3) inch (in3) meter (m3) Multiply By 3.048000 2.540000 2.540000 2.540000 3.280840 3.937008 3.937008 3.937008 x x x x 2.831685 1.638706 6.102374 3.531466 6.102376 3.785412 x x x x x x 10-1 10-2 10-5 10+4 x 10+1 x 10+4 x 10-5 10-2 10-5 10-2 10+1 10+4 10-3 4.448222 section modulus S (m3) moment of inertia I (m4) modulus of elasticity E (Pa) 1.638706 x 10-5 4.162314 x 10-7 6.894757 x 10+3 1.355818 1.129848 x 10-1 7.375621 x 10-1 8.850748 Mass ounce (avoirdupois) pound (avoirdupois) ton (short, 2000 lb) ton (long, 2240 lb) kilogram (kg) kilogram (kg) kilogram (kg) kilogram (kg) 2.834952 x 10-2 4.535924 x 10-1 9.071847 x 10+2 1.016047 x 10+3 3.527396 x 10+1 2.204622 1.102311 x 10-3 9.842064 x 10-4 kilogram (kg) kilogram (kg) kilogram (kg) kilogram (kg) ounce (avoirdupois) pound (avoirdupois) ton (short 2000 lb) ton (long 2240 lb) S (in3) I (in4) E (psi) 6.102374 x 10+4 2.402510 x 10+6 1.450377 x 10-4 Abbreviations Multiply By Bending Moment or Torque lbf•ft newton meter (N•m) lbf•in newton meter (N•m) N•m lbf•ft N•m lbf•in Mass Per Unit Length lb/ft kilogram per meter (kg/m) lb/in kilogram per meter (kg/m) kg/m lb/ft kg/m lb/in 1.488164 1.785797 x 10+1 6.719689 x 10-1 5.599741 x 10-2 Mass Per Unit Volume lb/ft3 kilogram per cubic meter (kg/m3) lb/in3 kilogram per cubic meter (kg/m3) 3 kg/m lb/ft3 kg/m3 lb/in3 lbs/ft3 lbs/in3 1.601846 2.767990 6.242797 3.612730 1.728000 Mass Per Area Unit lb/ft2 kilogram per square meter (kg/m2) pound per square foot (lb/ft2) kg/m2 4.882428 2.048161 x 10-1 Pressure or Stress lbf/in2 (psi) kip/in2 (ksi) lbf/in2 (psi) pascal (Pa) pascal (Pa) megapascals (MPa) meter (m) meter (m) meter (m) micrometer (µm) foot (ft) inch (in) mil inch (in) Volume foot3 cubic inch3 cubic cubic centimeter (cm3) cubic cubic meter (m3) foot3 cubic meter (m3) inch3 gallon (U.S. liquid) cubic degree Celsius t°C = (t°F - 32) / 1.8 degree Fahrenheit t°F = 1.8 t°C + 32 Section Properties section modulus S (in3) moment of inertia I (in4) modulus of elasticity E (psi) To Convert From x x x x x x x To x x x x x pascal (Pa) 6.894757 x pascal (Pa) 6.894757 x megapascals (MPa) 6.894757 x pound force per sq. inch (psi) 1.450377 x kip per sq. inch (ksi) 1.450377 x lbf/in2 (psi) 1.450377 x 239 10+1 10+4 10-2 10-5 10+3 10+3 10+6 10-3 10-4 10-7 10+2 AISC AISI ANSI ASTM AWWA Dia. Ft. Ga. I.D. In. Lbs. Max. Min. MSS NFPA O.D. Oz. Pre-Galv. psi PVC UL UNC UNCR Wt./C = American Institute of Steel Construction = American Iron & Steel Institute = American National Standards Institute = American Society for Testing & Materials = American Water Works Association = Diameter = Feet = Gauge = Inside Diameter = Inch = Pounds = Maximum = Minimum = Manufacturers Standardization Society = National Fire Protection Association = Outside Diameter = Ounces = Pre-galvanized = Pounds Per Square Inch = Polyvinyl Chloride = Underwriters' Laboratories, Inc. = Unified Coarse Threads = Unified Coarse Threads (Rounded Root) = Weight per 100 Metric Symbols cm kg kN m µm mm MPa N Nm Pa = = = = = = = = = = centimeter kilogram kilonewton meter micrometer millimeter megapascal newton newton-meter pascal Reference Data To Convert From Reference Data SCHEDULE 40 STEEL PIPE DATA Nominal Pipe Size Pipe O.D. Wall Thickness Weight of Pipe Weight of Pipe Filled With Water Maximum Span* Recommended Hanger Rod Reference Data In. mm In. mm In. mm Lbs./Ft. kg/m Lbs./Ft. kg/m Ft. Meter Sizes 3/8" (10) .675 (17.1) .091 (2.3) .6 (.9) .7 (1.0) 7 (2.13) 3/8"-16 1/2" (15) .840 (21.3) .109 (2.7) .8 (1.2) .9 (1.3) 7 (2.13) 3/8"-16 3/4" (20) 1.050 (26.7) .113 (2.9) 1.1 (1.7) 1.3 (2.0) 7 (2.13) 3/8"-16 1" (25) 1.315 (33.4) .133 (3.4) 1.7 (2.5) 2.1 (3.0) 7 (2.13) 3/8"-16 11/4" (32) 1.660 (42.1) .140 (3.5) 2.3 (3.4) 2.9 (4.3) 7 (2.13) 3/8"-16 11/2" (40) 1.900 (48.2) .145 (3.7) 2.7 (4.0) 3.6 (5.3) 9 (2.74) 3/8"-16 2" (50) 2.375 (60.3) .154 (3.9) 3.6 (5.4) 5.0 (7.5) 10 (3.05) 3/8"-16 21/2" (65) 2.875 (73.0) .203 (5.1) 5.8 (8.6) 7.9 (11.7) 11 (3.35) 1/2"-13 3" (80) 3.500 (88.9) .216 (5.5) 7.6 (11.2) 10.8 (15.9) 12 (3.66) 1/2"-13 31/2" (90) 4.000 (101.6) .226 (5.7) 9.1 (13.5) 13.4 (19.8) 13 (3.96) 1/2"-13 4" (100) 4.500 (114.3) .237 (6.0) 10.8 (16.0) 16.3 (24.2) 14 (4.27) 5/8"-11 5" (125) 5.563 (141.3) .258 (6.5) 14.6 (21.7) 23.2 (34.6) 16 (4.87) 5/8"-11 6" (150) 6.625 (168.3) .280 (7.1) 19.0 (28.2) 31.5 (46.8) 17 (5.18) 3/4"-10 8" (200) 8.625 (219.1) .322 (8.2) 28.5 (42.5) 50.1 (74.6) 19 (5.79) 3/4"-10 10" (250) 10.750 (273.0) .365 (9.3) 40.5 (60.2) 74.6 (110.9) 22 (6.69) 7/8"-9 12" 14" 16" 18" (300) (323.8) 7/8"-9 (7.62) (300.8) 23 25 27 28 (7.01) (156.2) 102.1 121.5 159.5 202.2 (151.9) (14.3) 51.1 63.0 83.0 105.0 (75.9) (457.2) .406 .437 .500 .563 (10.3) (450) 12.750 14.000 16.000 18.000 (8.53) 1"-8 1"-8 1"-8 20" (500) 20.000 (508.0) .593 (15.1) 123.0 (183.0) 243.4 (361.8) 30 (9.14) 11/4"-7 24" (600) 24.000 (609.6) .687 (17.4) 171.0 (254.5) 345.2 (513.7) 32 (9.75) 11/4"-7 (350) (400) (355.6) (406.4) (11.1) (12.7) (93.7) (123.5) (180.7) (237.3) (8.23) SCHEDULE 80 STEEL PIPE DATA Nominal Pipe Size Pipe O.D. Wall Thickness In. mm In. mm In. mm 3/8" (10) .675 (17.1) .126 1/2" (15) .840 (21.3) .147 3/4" (20) 1.050 (26.7) 1" (25) 1.315 11/4" (32) 11/2" Weight of Pipe Lbs./Ft. kg/m (3.2) .7 (3.7) 1.1 .154 (3.9) (33.4) .179 1.660 (42.1) (40) 1.900 2" (50) 21/2" Weight of Pipe Filled With Water Maximum Span* Recommended Hanger Rod Lbs./Ft. kg/m Ft. Meter Sizes (1.1) .8 (1.2) 7 (2.13) 3/8"-16 (1.6) 1.2 (1.7) 7 (2.13) 3/8"-16 1.5 (2.2) 1.7 (2.5) 7 (2.13) 3/8"-16 (4.5) 2.2 (3.2) 2.5 (3.6) 7 (2.13) 3/8"-16 .191 (4.8) 3.0 (4.4) 3.5 (5.2) 7 (2.13) 3/8"-16 (48.2) .200 (5.1) 3.6 (5.4) 4.3 (6.5) 9 (2.74) 3/8"-16 2.375 (60.3) .218 (5.5) 5.0 (7.5) 6.3 (9.4) 10 (3.05) 3/8"-16 (65) 2.875 (73.0) .276 (7.0) 7.6 (11.4) 9.4 (14.1) 11 (3.35) 1/2"-13 3" (80) 3.500 (88.9) .300 (7.6) 10.2 (15.2) 13.0 (19.4) 12 (3.66) 1/2"-13 31/2" (90) 4.000 (101.6) .318 (8.1) 12.5 (18.6) 16.3 (24.3) 13 (3.96) 1/2"-13 4" (100) 4.500 (114.3) .337 (8.5) 15.0 (22.3) 20.0 (29.7) 14 (4.27) 5/8"-11 5" (125) 5.563 (141.3) .375 (9.5) 20.8 (30.9) 28.7 (42.6) 16 (4.87) 5/8"-11 6" (150) 6.625 (168.3) .432 (11.0) 28.6 (42.5) 39.9 (59.3) 17 (5.18) 3/4"-10 8" (200) 8.625 (219.1) .500 (12.7) 43.4 (64.5) 63.1 (93.9) 19 (5.79) 3/4"-10 10" (250) 10.750 (273.0) .593 (15.0) 64.4 (95.8) 95.5 (142.1) 22 (6.69) 7/8"-9 12" 14" 16" 18" (300) (323.8) 7/8"-9 (7.62) (386.2) 23 25 27 28 (7.01) (254.5) 132.6 158.2 206.7 259.5 (197.3) (23.8) 88.6 107.0 137.0 171.0 (131.8) (457.2) .687 .750 .843 .937 (17.4) (450) 12.750 14.000 16.000 18.000 (8.53) 1"-8 1"-8 1"-8 20" (500) 20.000 (508.0) 1.031 (26.2) 209.0 (311.0) 318.4 (473.8) 30 (9.14) 11/4"-7 24" (600) 24.000 (609.6) 1.218 (30.9) 297.0 (442.0) 455.2 (677.4) 32 (9.75) 11/4"-7 (350) (400) (355.6) (406.4) Based on ASTM A53-86. 1 cubic ft. of water weighs 62.41 lbs. 1 gallon (U.S.) weighs 8.335 lbs. 1 cubic meter of water weighs 999.97 kg. 1 liter weighs .999 kg. (19.0) (21.4) (159.2) (203.9) (235.4) (306.6) (8.23) Based on MSS SP-69 Table 3 & 4. *Many codes require pipe hangers to be spaced every 10' (3.048 meters) regardless of size. Check local codes. Spacing and capacities are based on water filled pipe. Closer hanger spacing may be required where additional valves and fittings increase the load. 240 Reference Data AWWA DUCTILE IRON PIPE DATA In. 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" 42" 48" 54" Class mm (80) (100) (150) (200) (250) (300) (350) (400) (450) (500) (600) (750) (900) (1050) (1200) (1350) O.D. of Ductile Iron Pipe In. 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 3.96 4.80 6.90 9.05 11.10 13.20 15.30 17.40 19.50 21.60 25.80 32.00 38.30 44.50 50.80 57.10 Wall Thickness mm In. mm (100.6) .31 .32 .34 .36 .38 .40 .42 .43 .44 .45 .47 .51 .58 .65 .72 .81 (7.9) (121.9) (175.2) (229.9) (281.9) (335.3) (388.6) (441.9) (495.3) (548.6) (655.3) (812.8) (972.8) (1130.3) (1290.3) (1450.3) (8.1) (8.6) (9.1) (9.6) (10.1) (10.6) (10.9) (11.1) (11.4) (11.9) (12.9) (14.7) (16.5) (18.3) (20.6) Weight of Pipe Lbs./Ft. 11.2 14.2 22.0 31.0 40.4 50.7 62.4 72.8 83.6 95.2 119.2 161.3 219.5 285.2 360.3 455.0 Weight of Pipe Filled With Water kg/m Lbs./Ft. kg/m (16.6) 15.0 20.1 35.1 54.0 76.8 103.0 133.5 165.9 201.5 241.0 329.4 487.8 688.8 920.1 1189.2 1502.2 (22.2) (21.1) (32.7) (46.1) (60.1) (75.4) (92.8) (108.3) (124.4) (141.7) (177.4) (240.0) (326.6) (424.4) (536.2) (677.1) (29.9) (52.2) (80.3) (114.2) (153.2) (198.6) (246.8) (299.8) (358.7) (490.2) (597.1) (1025.0) (1369.2) (1769.7) (2135.5) Based on AWWA C108-70, Table 8.2. Add flange weight for flanged cast iron pipe. Ductile Iron Pipe Size Ductile Iron Pipe Size B3110 B3114 B3120 B3122 B3122A B3124 B3126 B3117SL (80) 31/2 31/2 31/2 31/2 31/2 2 to 31/2 2 to 31/2 2 to 31/2 (100) 4 6 10 12 12 16 18 20 24 30 4 6 8 10 12 14 16 18 20 24 4 6 8 10 12 14 16 18 20 24 4 6 8 10 12 14 16 18 20 24 4 6 8 10 12 14 16 18 20 24 4 to 6 4 to 6 4 to 6 8 to 10 8 to 10 8 to 10 12 to 14 12 to 14 12 to 14 16 to 20 16 to 20 16 to 20 --- --- 24 B3118SL B3119SL B218 B219 B379 B479 B3114R B3117R 2 to 31/2 4 to 6 2 to 31/2 4 to 6 8 to 10 12 to 14 12 to 14 16 to 20 16 to 20 24 24 B219-1 B219-2 B219-3 B219-4 B219-4 B219-5 ----------- ----B379 B379 B379 B379 B379 B379 ------- --------------B479 B479 B479 B479 31/2 4 6 8 10 12 14 16 18 20 24 2 to 31/2 4 to 6 8 to 10 B218 B218 B218 ----------------- In. mm 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" (150) (200) (250) (300) (350) (400) (450) (500) (600) Ductile Iron Pipe Size In. 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" mm (80) (100) (150) (200) (250) (300) (350) (400) (450) (500) (600) 241 8 to 10 12 to 14 16 to 20 24 Reference Data Nominal Pipe Size Reference Data SERVICE WEIGHT CAST IRON SOIL PIPE DATA (Bell and Spigot Type) Nominal Pipe Size O.D. of Cast Iron Pipe Wall Thickness Weight of Pipe Weight of Pipe Filled With Water In. mm In. mm In. mm Lbs./Ft. kg/m Lbs./Ft. 2" 3" 4" 5" 6" 8" 10" 12" 15" (50) 2.25 3.25 4.25 5.25 6.25 8.38 10.50 12.50 15.62 (57.1) .17 .17 .18 .18 .18 .23 .28 .28 .31 (4.3) 4.0 6.0 8.0 10.4 13.0 20.0 29.0 38.0 51.0 (5.9) 5.5 9.4 14.2 22.7 26.9 45.7 69.6 96.2 147.6 (80) (100) (125) (150) (200) (250) (300) (380) (82.5) (107.9) (133.3) (158.7) (212.8) (266.7) (317.5) (396.7) (4.3) (4.6) (4.6) (4.6) (5.8) (7.1) (7.1) (7.9) (8.9) (11.9) (15.5) (19.3) (29.7) (43.1) (56.5) (75.9) kg/m (8.1) (13.9) (21.1) (33.8) (40.0) (67.9) (103.5) (143.1) (219.6) Based on ASTM A74 - Table 2. Reference Data EXTRA WEIGHT CAST IRON SOIL PIPE DATA (Bell and Spigot Type) Nominal Pipe Size O.D. of Cast Iron Pipe In. mm In. 2" (50) 3" 4" 5" 6" 8" 10" 12" 15" (80) (100) (125) (150) (200) (250) (300) (380) Wall Thickness Weight of Pipe mm In. mm 2.38 (60.4) .190 (4.8) 5.0 (7.2) 6.6 (9.5) 3.50 4.50 5.50 6.50 8.62 10.75 12.75 15.88 (88.9) .250 .250 .250 .250 .310 .375 .375 .440 (6.3) 9.0 12.0 15.0 19.0 30.0 43.0 54.0 75.0 (13.0) 12.7 18.5 25.2 33.7 56.1 83.8 112.8 166.8 (18.3) (114.3) (139.7) (165.1) (218.9) (273.0) (323.8) (403.3) (6.3) (6.3) (6.3) (7.9) (9.5) (9.5) (11.2) Lbs./Ft. kg/m Weight of Pipe Filled With Water (17.4) (21.7) (27.5) (43.4) (62.3) (78.2) (108.6) Lbs./Ft. kg/m (26.8) (36.5) (48.8) (81.2) (121.4) (163.3) (241.5) Based on ASTM A74 - Table 1. NO-HUB CAST IRON SOIL PIPE DATA Nominal Pipe Size O.D. of Cast Iron Pipe In. mm In. 11/2" (40) 2" (50) 3" (80) 4" (100) 5" Wall Thickness Weight of Pipe mm In. mm 1.90 (48.2) .16 (4.0) 2.35 (59.7) .16 (4.0) 3.35 (85.1) .16 (4.0) 4.38 (111.2) .19 (4.8) (125) 5.30 (134.6) .19 (4.8) 6" (150) 6.30 (160.0) .19 8" (200) 8.38 (212.8) .23 Based on Cast Iron Soil Pipe Institute Standards 301-72, Table 1. 242 Lbs./Ft. Weight of Pipe Filled With Water kg/m Lbs./Ft. kg/m 2.7 (4.0) 6.2 (9.2) 3.6 (5.3) 8.6 (12.5) 5.2 (7.7) 13.5 (20.0) 7.4 (11.0) 20.2 (30.0) 9.6 (14.3) 27.5 (41.0) (4.8) 11.0 (16.3) 34.0 (50.5) (5.8) 18.0 (26.8) 57.5 (85.6) Reference Data COPPER TUBING (TYPE L) DATA In. Wall Thickness O.D. Size mm In. 1/4" (6) 3/8" (10) 1/2" Weight of Tubing Weight of Pipe Filled With Water mm In. mm Lbs./Ft. kg/m Lbs./Ft. kg/m .375 (9.5) .030 (.7) .12 (.17) .15 (.21) .500 (12.7) .035 (.9) .20 (.30) .26 (.39) (15) .625 (15.9) .040 (1.0) .28 (.41) .38 (.56) 5/8" (17) .750 (19.0) .042 (1.0) .36 (.53) .51 (.75) 3/4" (20) (22.2) (28.6) .45 .65 (.67) (25) .045 .050 (1.1) 1" .875 1.125 (.97) .66 1.01 (1.50) 11/4" (32) 1.375 (34.9) .055 (1.4) .88 (1.31) 1.42 (2.11) 11/2" 2" (40) 1.625 2.125 (41.3) .060 .070 (1.5) 1.14 1.75 (1.69) 1.91 3.09 (2.83) 21/2" 3" (65) 2.625 3.125 (66.7) .080 .090 (2.0) 2.48 3.33 (3.69) 4.54 6.28 (6.75) 31/2" 4" 5" 6" 8" (90) 3.625 4.125 5.125 6.125 8.125 (92.1) .100 .110 .125 .140 .200 (2.5) 4.29 5.38 7.61 10.20 19.29 (6.38) 8.28 10.57 15.69 21.81 39.49 (12.32) (50) (80) (100) (125) (150) (200) (54.0) (79.4) (104.8) (130.2) (155.6) (206.4) (1.3) (1.8) (2.3) (2.8) (3.2) (3.5) (5.1) (2.60) (4.95) (8.00) (11.32) (15.18) (28.70) (.98) (4.59) (9.34) (15.72) (23.34) (32.46) (58.89) Dimensions taken from ASTM B88-83. COPPER TUBING (TYPE K) DATA Nominal Tubing Size Wall Thickness O.D. Size Weight of Tubing Weight of Pipe Filled With Water In. mm In. mm In. mm Lbs./Ft. kg/m Lbs./Ft. kg/m 1/4" (6) .375 (9.5) .035 (.9) .14 (.21) .17 (.25) 3/8" (10) .500 (12.7) .049 (1.2) .27 (.40) .32 (.47) 1/2" (15) .625 (15.9) .049 (1.2) .34 (.50) .43 (.63) 5/8" (17) (19.0) .42 .64 .84 (.62) (20) .049 .065 .065 (1.2) 3/4" .750 .875 1.125 .56 .83 1.18 (1.23) 1.375 1.625 2.125 (34.9) .065 .072 .083 (1.6) 2.625 3.125 (66.7) .095 .109 (2.4) .120 .134 .160 .192 .271 (3.0) 1" (25) 11/4" 11/2" 2" (32) 21/2" (65) 3" (80) 31/2" 4" 5" 6" 8" (40) (50) (90) (100) (125) (150) (200) 3.625 4.125 5.125 6.125 8.125 (22.2) (28.6) (41.3) (54.0) (79.4) (92.1) (104.8) (130.2) (155.6) (206.4) Dimensions taken from ASTM B88-83. 1 cubic ft. of water weighs 62.41 lbs. 1 cubic meter of water weighs 999.97 kg. 1 gallon (U.S.) weighs 8.335 lbs. 1 liter weighs .999 kg. 243 (1.6) (1.6) (1.8) (2.1) (2.8) (3.4) (4.0) (4.9) (6.9) (.95) (1.25) 1.04 1.36 2.06 (1.55) 2.92 4.00 (4.34) 5.12 6.51 9.67 13.87 25.90 (7.62) (2.02) (3.06) (5.95) (9.69) (14.39) (20.60) (38.50) 1.57 2.10 3.37 4.92 6.96 9.02 11.57 17.67 25.07 45.40 (.83) (1.75) (2.34) (3.12) (5.01) (7.31) (10.35) (13.42) (17.22) (26.29) (37.27) (67.52) Reference Data Nominal Tubing Size Reference Data RECOMMENDED HANGER SPACING AND ROD SIZE FOR COPPER TUBING Nominal Tubing Size 6 Recommended Hanger Rod Size Maximum Span Reference Data In. mm Ft. Meter 1/2" (15) 5 (1.52) 3/8" - 16 3/4" (20) 5 (1.52) 3/8" - 16 1" (25) 6 (1.83) 3/8" - 16 11/4" (32) 7 (2.13) 3/8" - 16 11/2" 2" (40) 8 8 (2.44) 3/8" (2.44) 3/8" - 16 - 16 21/2" 3" (65) 9 10 (2.74) 1/2" (3.05) 1/2" 11 12 13 14 16 (3.35) 1/2" (3.66) 1/2" 31/2" 4" 5" 6" 8" (50) (80) (90) (100) (125) (150) (200) - 13 - 13 - 13 - 13 1/2" - 13 5/8" - 11 3/4" - 10 (3.96) (4.27) (4.87) Based on MSS-SP-69, Table 3 & 4. GLASS PIPE DATA Regular Schedule Nominal Pipe Size In. mm In. 11/2" 2" (40) 3" 4" 6" (80) (50) (100) (150) Wall Thickness O.D. Size Weight of Pipe mm In. mm 1.84 2.34 (46.7) .12 .14 (3.0) 3.41 4.53 6.66 (86.6) .17 .20 .24 (4.3) (59.4) (115.0) (169.1) (3.5) (5.1) (6.1) Lbs./Ft. .6 .9 1.6 2.6 4.7 kg/m (.9) (1.4) (2.4) (3.8) (7.0) Weight of Pipe Filled With Water Lbs./Ft. 1.5 2.3 4.8 8.4 17.5 kg/m (2.2) (3.5) (7.1) (12.4) (26.0) Consult manufacturer for support spacing requirements. Heavy Schedule Nominal Pipe Size Wall Thickness O.D. Size In. mm In. Weight of Pipe mm In. mm kg/m Lbs./Ft. kg/m 1" (25) 1.31 (33.3) .16 (4.0) .6 (.9) .9 (1.4) 11/2" (40) 1.84 (46.7) .17 (4.3) .8 (1.3) 1.5 (2.4) 2" 3" 4" 6" (50) 2.34 3.41 4.53 6.66 (59.4) .17 .20 .26 .33 (4.3) 1.1 2.0 3.4 6.3 (1.6) 2.4 5.0 8.8 18.7 (3.6) (80) (100) (150) (86.6) (115.0) (169.1) (5.1) (6.6) (8.4) Consult manufacturer for support spacing requirements. 1 1 1 1 Lbs./Ft. Weight of Pipe Filled With Water cubic ft. of water weighs 62.41 lbs. cubic meter of water weighs 999.97 kg. gallon (U.S.) weighs 8.335 lbs. liter weighs .999 kg. 244 (3.0) (5.0) (9.4) (7.5) (13.1) (27.9) Reference Data SCHEDULE 40 PVC PLASTIC PIPE DATA Wall Thickness Pipe O.D. In. mm In. mm In. mm 1/8" (3) .405 1/4" (6) .540 (10.3) .068 (1.7) (13.7) .088 (2.2) 3/8" (10) .675 (17.1) .091 1/2" (15) .840 (21.3) 3/4" (20) (26.7) 1" 11/4" (25) 1.050 1.315 1.660 11/2" 2" (40) 1.900 2.375 (48.2) 21/2" 3" (65) 2.875 3.500 (73.0) 31/2" 4" 5" (90) 4.000 4.500 5.563 (101.6) 6.625 8.625 10.750 12.750 (168.3) 6" 8" 10" 12" (32) (50) (80) (100) (125) (150) (200) (250) (300) (33.4) (42.1) (60.3) (88.9) (114.3) (141.3) (219.1) (273.0) (323.8) Weight of Pipe kg/m Lbs./Ft. kg/m .04 (.06) .06 (.09) .07 (.11) .11 (.17) (2.3) .10 (.14) .18 (.26) .109 (2.7) .15 (.20) .25 (.40) .113 .133 .140 (2.9) .20 .30 .40 (.30) .40 .70 1.00 (.60) .145 .154 (3.7) .50 .60 (.70) .203 .216 (5.1) 1.00 1.30 (1.50) .226 .237 .258 (5.7) 1.60 1.90 2.80 (2.40) .280 .322 .366 .406 (7.1) 3.30 5.30 7.50 10.00 (4.90) (3.4) (3.5) (3.9) (5.5) (6.0) (6.5) (8.2) (9.3) (10.3) Lbs./Ft. Weight of Pipe Filled With Water (.40) (.60) (.90) (2.00) (2.80) (4.10) (7.80) (11.10) (14.90) (.90) (1.50) 1.40 2.00 (2.00) 3.10 4.50 (4.51) 5.90 7.40 11.40 15.40 26.90 41.60 58.50 (3.00) (6.70) (8.70) (11.00) (17.00) (23.00) (39.90) (61.80) (87.00) SCHEDULE 80 PVC PLASTIC PIPE DATA Nominal Pipe Size 1 1 1 1 Wall Thickness Pipe O.D. In. mm In. mm In. mm 1/8" (3) .405 1/4" (6) .540 (10.3) .095 (2.4) (13.7) .119 (3.0) 3/8" (10) .675 (17.1) .126 1/2" (15) .840 (21.3) 3/4" (20) (26.7) 1" 11/4" 11/2" 2" 21/2" 3" (25) 1.050 1.315 1.660 1.900 2.375 2.875 3.500 31/2" 4" 5" 6" 8" 10" 12" (90) 4.000 4.500 5.563 6.625 8.625 10.750 12.750 (101.6) (32) (40) (50) (65) (80) (100) (125) (150) (200) (250) (300) (33.4) (42.1) (48.2) (60.3) (73.0) (88.9) (114.3) (141.3) (168.3) (219.1) (273.0) (323.8) Weight of Pipe kg/m Lbs./Ft. kg/m .05 (.08) .06 (.10) .09 (.14) .12 (.18) (3.2) .10 (.19) .16 (.28) .147 (3.7) .10 (.20) .20 (.30) .154 .179 .191 .200 .218 .276 .300 (3.9) .20 .40 .50 .60 .90 1.30 1.80 (.40) .40 .70 1.00 1.30 2.20 3.10 4.60 (.70) .318 .337 .375 .432 .500 .593 .687 (8.1) cubic ft. of water weighs 62.41 lbs. cubic meter of water weighs 999.97 kg. gallon (U.S.) weighs 8.335 lbs. liter weighs .999 kg. 245 (4.5) (4.8) (5.1) (5.5) (7.0) (7.6) (8.5) (9.5) (11.0) (12.7) (15.0) (17.4) Lbs./Ft. Weight of Pipe Filled With Water 2.20 2.60 4.10 5.00 8.00 11.90 16.30 (.50) (.80) (.90) (1.30) (2.00) (2.70) (3.20) (3.90) (6.10) (7.50) (11.90) (17.70) (24.30) 6.00 7.60 12.00 16.30 27.80 43.20 60.30 (.90) (1.60) (2.00) (3.20) (4.70) (6.90) (8.90) (11.30) (17.80) (24.30) (41.30) (77.60) (89.80) Reference Data Nominal Pipe Size Reference Data SPACING OF HANGERS FOR SCHEDULE 40 PVC PLASTIC PIPE Support Spacing in Ft. (Meter) For Pipe Sizes of Temperature 20°F 40°F 60°F 80°F 100°F 110°F 120°F 130°F 140°F 150°F (-6.6°C) (4.4°C) (15.5°C) (26.6°C) (37.8°C) (43.3°C) (48.9°C) (54.4°C) (60.0°C) (65.5°C) 1 /2"-3/4" (15-20) 1"-11/4" (25-32) 11/2"-2" (40-50) 21/2" (65) 3" (80) 4" (100) 6" (150) 5.00 4.75 4.50 4.25 4.00 3.75 3.33 3.00 2.66 2.00 (1.52) 5.50 5.25 5.00 4.66 4.33 4.00 3.75 3.33 2.80 2.25 (1.67) 5.80 5.50 5.25 5.00 4.66 4.33 3.80 3.50 3.00 2.50 (1.77) 6.66 6.33 6.00 5.50 5.25 4.80 4.50 4.00 3.50 2.80 (2.03) 6.80 6.50 6.25 5.80 5.50 5.25 4.75 4.25 3.66 3.00 (2.07) 7.33 7.00 6.50 6.25 5.80 5.50 5.00 4.50 3.80 3.25 (2.23) 7.80 7.50 7.00 6.80 6.33 5.80 5.33 4.80 4.25 3.50 (2.38) (1.45) (1.37) (1.29) (1.22) (1.14) (1.01) (.91) (.81) (.61) (1.60) (1.52) (1.42) (1.32) (1.22) (1.14) (1.01) (.85) (.68) (1.67) (1.60) (1.52) (1.42) (1.32) (1.16) (1.06) (.91) (.76) (1.93) (1.83) (1.67) (1.60) (1.46) (1.37) (1.22) (1.06) (.85) (1.98) (1.90) (1.77) (1.67) (1.60) (1.45) (1.29) (1.11) (.91) (2.13) (1.98) (1.90) (1.77) (1.67) (1.52) (1.37) (1.16) (.99) (2.28) (2.13) (2.07) (1.93) (1.77) (1.62) (1.46) (1.29) (1.06) Reference Data SPACING OF HANGERS FOR SCHEDULE 80 PVC PLASTIC PIPE Support Spacing in Ft. (Meter) For Pipe Sizes of Temperature 20°F 40°F 60°F 80°F 100°F 110°F 120°F 130°F 140°F 150°F (-6.6°C) (4.4°C) (15.5°C) (26.6°C) (37.8°C) (43.3°C) (48.9°C) (54.4°C) (60.0°C) (65.5°C) 1 3 /2"- /4" (15-20) 5.75 5.50 5.25 4.80 4.50 4.33 3.80 3.50 3.00 2.50 (1.75) (1.67) (1.60) (1.46) (1.37) (1.32) (1.16) (1.06) (.91) (.76) (25) 1 /4"-11/2" (32-40) 2" (1.93) 6.66 6.33 6.00 5.66 5.25 4.80 4.50 4.00 3.50 3.00 (2.03) 7.00 6.50 6.25 6.00 5.50 5.12 4.75 4.33 3.66 3.12 1" 6.33 6.00 5.75 5.33 5.00 4.60 4.33 3.80 3.33 2.75 (1.83) (1.75) (1.62) (1.52) (1.40) (1.32) (1.16) (1.01) (.84) 1 (1.93) (1.83) (1.72) (1.60) (1.46) (1.37) (1.22) (1.06) (.91) (50) (2.13) (1.98) (1.90) (1.83) (1.67) (1.56) (1.45) (1.32) (1.11) (.95) 21/2" (65) 7.80 7.50 7.00 6.66 6.33 5.80 5.33 4.75 4.25 3.33 (2.38) (2.28) (2.13) (2.03) (1.93) (1.77) (1.62) (1.45) (1.29) (1.01) 3" 8.20 7.75 7.33 7.00 6.50 6.00 5.50 5.00 4.33 3.50 (80) 4" (100) 6" (150) (2.50) 8.66 8.25 7.80 7.33 6.80 6.33 5.80 5.25 4.66 3.75 (2.64) 9.80 9.33 8.80 8.33 7.80 7.33 6.50 6.00 5.12 4.25 (2.99) (2.36) (2.23) (2.13) (1.98) (1.83) (1.67) (1.52) (1.32) (1.06) (2.51) (2.38) (2.23) (2.07) (1.93) (1.77) (1.60) (1.42) (1.14) (2.84) (2.68) (2.54) (2.38) (2.23) (1.98) (1.83) (1.56) (1.29) Hanger spacing for PVC plastic Pipe assumes fluid loads up to 1.35 specific gravity [85 Lbs./Ft.3 (136.5 kg/m3)] but not concentrated heavy loads. Rod Size As Determined By Steel Pipe Size For Fire Protection Steel Pipe Size In. mm Maximum Span Ft. 1"-11/4" (25-30) 12 11/2"-4" (40-100) 15 Rod Size LOAD CHART FOR THREADED ROD (ATR) Rod Size m (3.66) (2.54) (4.57) 3/8"-16 1/2"-13 0.126 (.81) 1350 (6.00) 1057 (4.70) 0.202 (1.30) 2160 (9.60) 1692 (7.52) (1.95) (61.38) 2530 3508 4620 5830 7440 10807 (11.25) (8.32) 3230 4480 5900 7450 9500 13800 (14.37) 1"-8 11/8"-7 11/4"-7 11/2"-6 0.302 0.419 0.551 0.693 0.890 1.29 13/4"-5 1.74 (11.22) 18600 (82.73) 14566 2"-41/2 2.30 (14.84) 24600 (109.42) 19625 (87.29) 21/4"-41/2 3.02 (19.48) 32300 (143.67) 25295 (112.51) 21/2"-4 3.72 (24.00) 39800 (177.03) 31169 (138.64) 23/4"-4 3"-4 4.62 5.62 (29.80) (219.73) (267.32) 38687 47066 (172.08) (36.26) 49400 60100 31/4"-8UN 6.72 (43.35) 71900 (319.81) 56307 (250.45) 31/2"-8UN 7.92 (51.09) 84700 (376.74) 66331 (295.04) 33/4"-8UN 9.21 (59.42) 98500 (438.13) 77139 (138.64) (4.57) 1/2"-13 (4.57) 5/8"-11 3/4"-10 Based on NFPA 13-1999, Table 6-2.2 & Table 6-1.4.1 Rod Size As Determined By Copper Tubing Size For Fire Protection 2"-3" 31/4"-4" 5"-8" (32-40) (50-80) (90-100) (125-200) Maximum Span 8 15 15 15 15 kN 572 15 (20-35) Lbs. (3.24) 15 11/4"-11/2" kN 730 (250-300) Ft. Lbs. (.43) (125-200) mm cm2 0.0678 5"-8" In. In.2 3/8"-16 10"-12" 3/4"-1" Maximum Safe Loads 750°F (399°C) 650°F (349°C) 3/8"-16 5/8"-11 Copper Tubing Size Root Area Thread Rod Size m (2.44) 3/8"-16 (3.05) 3/8"-16 (3.66) (4.57) (4.57) 3/8"-16 3/8"-16 1/2"-13 Based on NFPA 13-1999, Table 6-2.2 & Table 6-1.4.1 7/8"-9 (2.70) (3.55) (4.47) (5.74) (19.93) (26.24) (33.14) (42.25) Extracted from MSS SP-58, 2002, with permission of the publisher, the Manufacturers Standardization Society. 246 (15.60) (20.55) (25.93) (33.09) (48.07) (64.79) (209.35) Reference Data AMERICAN STANDARD 'S' SHAPE I-BEAMS In. x Lbs./Ft. (mm x kg/m) Flange Width bf Flange Thickness tf Designation Nominal Depth & Weight In. x Lbs./Ft. (mm x kg/m) Flange Width bf Flange Thickness tf S3 x 5.7 (S75 x 8.5) 23/8" (59) 0.260 (6.6) C3 x 4.1 (C75 x 6.1) 13/8" (35) 0.273 (6.9) S3 x 7.5 (S75 x 11.2) 21/2" (63) 0.260 (6.6) C3 x 5 (C75 x 7.4) 11/2" (37) 0.273 (6.9) S4 x 7.7 (S100 x 11.5) 25/8" (68) 0.293 (7.4) C3 x 6 (C75 x 8.9) 1 /8" (40) 0.273 (6.9) S4 x 9.5 (S100 x 14.1) 23/4" (71) 0.293 (7.4) C4 x 5.4 (C100 x 8) 19/16" (40) 0.296 (7.5) S5 x 10 (S130 x 15) 3" (76) 0.326 (8.3) C4 x 7.25 (C100 x 10.8) 13/4" (44) 0.296 (7.5) S5 x 14.75 (S130 x 22) 31/4" (83) 0.326 (8.3) C5 x 6.7 (C130 x 10) 13/4" (44) 0.320 (8.1) S6 x 12.5 (S150 x 18.6) 33/8" (85) 0.359 (9.1) C5 x 9 (C130 x 13.4) 1 /8" (47) 0.320 (8.1) S6 x 17.25 (S150 x 25.7) 311/16" (91) 0.359 (9.1) C6 x 8.2 (C150 x 12.2) 115/16" (48) 0.343 (8.7) S7 x 15.3 (S180 x 22.8) 35/8" (93) 0.392 (10.0) C6 x 10.5 (C150 x 15.6) 2" (51) 0.343 (8.7) S7 x 20 (S180 x 29.8) 37/8" (98) 0.392 (10.0) C6 x 13 (C150 x 19.3) 1 2 /8" (54) 0.343 (8.7) S8 x 18.4 (S200 x 27.4) 4" (102) 0.425 (10.8) C7 x 9.8 (C180 x 14.6) 21/16" (53) 0.366 (9.3) S8 x 23 (S200 x 34) 41/8" (106) 0.425 (10.8) C7 x 12.25 (C180 x 18.2) 23/16" (55) 0.366 (9.3) S10 x 25.4 (S250 x 37.8) 45/8" (118) 0.491 (12.5) C7 x 14.75 (C180 x 22) 2 /4" (57) 0.366 (9.3) S10 x 35 (S250 x 52) 415/16" (126) 0.491 (12.5) C8 x 11.5 (C200 x 17.1) 21/4" (57) 0.390 (9.9) S12 x 31.8 (S310 x 47.3) 5" (127) 0.544 (13.8) C8 x 13.75 (C200 x 20.5) 23/8" (59) 0.390 (9.9) S12 x 35 (S310 x 52) 51/16" (129) 0.544 (13.8) C8 x 18.75 (C200 x 27.9) 21/2" (63) 0.390 (9.9) S12 x 40.8 (S310 x 60.7) 51/4" (133) 0.659 (16.7) C9 x 13.4 (C230 x 19.9) 2 /16" (61) 0.413 (10.5) S12 x 50 (S310 x 74) 51/2" (139) 0.659 (16.7) C9 x 15 (C230 x 22) 21/2" (63) 0.413 (10.5) S15 x 42.9 (S380 x 64) 51/2" (140) 0.622 (15.8) C9 x 20 (C230 x 30) 25/8" (67) 0.413 (10.5) S15 x 50 (S380 x 74) 55/8" (143) 0.622 (15.8) C10 x 15.3 (C250 x 22.8) 2 /8" (67) 0.436 (11.1) S18 x 54.7 (S460 x 81.4) 6" (152) 0.691 (17.6) C10 x 20 (C250 x 30) 23/4" (69) 0.436 (11.1) S18 x 70 (S460 x 104) 61/4" (159) 0.691 (17.6) C10 x 25 (C250 x 37) 27/8" (73) 0.436 (11.1) S20 x 66 (S510 x 98.2) 61/4" (159) 0.795 (20.2) C10 x 30 (C250 x 45) S20 x 75 (S510 x 112) 63/8" (162) 0.795 (20.2) C12 x 20.7 (C310 x 30.8) S20 x 86 (S510 x 128) 71/16" (179) 0.920 (23.4) C12 x 25 S20 x 96 (S510 x 143) 73/16" (183) 0.920 (23.4) C12 x 30 5 7 1 7 5 3" (76) 0.436 (11.1) 215/16" (74) 0.501 (12.7) (C310 x 37) 3" (76) 0.501 (12.7) (C310 x 45) 31/8" (80) 0.501 (12.7) 3 S24 x 80 (S610 x 119) 7" (178) 0.870 (22.1) C15 x 33.9 (C380 x 50.4) 3 /8" (86) 0.650 (16.5) S24 x 90 (S610 x 134) 71/8" (181) 0.870 (22.1) C15 x 40 (C380 x 60) 31/2" (89) 0.650 (16.5) S24 x 100 (S610 x 149) 71/4" (184) 0.870 (22.1) C15 x 50 (C380 x 74) 33/4" (94) 0.650 (16.5) S24 x 106 (S610 x 158) 77/8" (200) 1.090 (27.7) C18 x 42.7 (C460 x 63.5) 4" (102) 0.625 (15.8) S24 x 121 (S610 x 180) 81/16" (204) 1.090 (27.7) C18 x 45.8 (C460 x 68.1) 4" (102) 0.625 (15.8) C18 x 51.9 (C460 x 77.2) 41/8" (106) 0.625 (15.8) (112) 0.625 (15.8) Dimensions taken from ASTM A6-86. C18 x 58 247 (C460 x 86.3) 1 4 /4" Reference Data Designation Nominal Depth & Weight AMERICAN STANDARD 'C' SHAPE CHANNELS Reference Data WIDE FLANGE I-BEAMS Designation Nominal Depth & Weight In. x Lbs./Ft. (mm x kg/m) Flange Width bf Flange Thickness tf Reference Data W4 x 13 (W100 x 19.3) 41/16" (103) 0.345 W5 x 16 (W130 x 23.8) 5" (127) W5 x 19 (W130 x 28.1) 5" (128) W6 x 9 (W150 x 13.5) 315/16" W6 x 12 (W150 x 18.0) W6 x 16 (W150 x 24.0) W6 x 20 W6 x 25 Designation Nominal Depth & Weight In. x Lbs./Ft. (mm x kg/m) Flange Width bf Flange Thickness tf (8.8) W12 x 14 (W310 x 21.0) 4" (101) 0.225 (5.7) 0.360 (9.1) W12 x 16 (W310 x 23.8) 4" (101) 0.265 (6.7) 0.430 (10.9) W12 x 19 (W310 x 28.3) 4" (101) 0.350 (8.9) (100) 0.215 (5.5) W12 x 22 (W310 x 32.7) 4" (101) 0.425 (10.8) 4" (101) 0.280 (7.1) W12 x 26 (W310 x 38.7) 61/2" (165) 0.380 (9.7) 4" (101) 0.405 (10.3) W12 x 30 (W310 x 44.5) 61/2" (165) 0.440 (11.2) (W150 x 29.8) 6" (153) 0.365 (9.3) W12 x 35 (W310 x 52) 69/16" (167) 0.520 (13.2) (W150 x 37.1) 61/16" (154) 0.455 (11.6) W12 x 40 (W310 x 60) 8" (203) 0.515 (13.1) W8 x 10 (W200 x 15.0) 315/16" (100) 0.205 (5.2) W12 x 45 (W310 x 67) 81/16" (205) 0.575 (14.6) W8 x 13 (W200 x 19.3) 4" (101) 0.255 (6.5) W12 x 50 (W310 x 74) 81/16" (205) 0.640 (16.3) W8 x 15 (W200 x 22.5) 4" (101) 0.315 (8.0) W12 x 53 (W310 x 79) 10" (254) 0.575 (14.6) W8 x 18 (W200 x 26.6) 51/4" (133) 0.330 (8.4) W12 x 58 (W310 x 86) 10" (254) 0.640 (16.3) W8 x 21 (W200 x 31.3) 51/4" (133) 0.400 (10.2) W12 x 65 (W310 x 97) 12" (306) 0.605 (15.4) W8 x 24 (W200 x 35.9) 61/2" (165) 0.400 (10.2) W12 x 72 (W310 x 107) 12" (306) 0.670 (17.0) W8 x 28 (W200 x 41.7) 61/2" (166) 0.465 (11.8) W12 x 79 (W310 x 117) 121/16" (307) 0.735 (18.7) W8 x 31 (W200 x 46.1) 8" (203) 0.435 (11.0) W12 x 87 (W310 x 129) 121/8" (308) 0.810 (20.6) W8 x 35 (W200 x 52) 8" (203) 0.495 (12.6) W12 x 96 (W310 x 143) 121/8" (308) 0.900 (22.9) W8 x 40 (W200 x 59) 81/16" (205) 0.560 (14.2) W12 x 106 (W310 x 158) 121/4" (310) 0.990 (25.1) W8 x 48 (W200 x 71) 81/8" (206) 0.685 (17.4) W12 x 120 (W310 x 179) 125/16" (313) 1.105 (28.1) W8 x 58 (W200 x 86) 81/4" (209) 0.810 (20.6) W12 x 136 (W310 x 202) 123/8" (315) 1.250 (31.8) W8 x 67 (W200 x 100) 81/4" (210) 0.935 (23.7) W12 x 152 (W310 x 226) 121/2" (317) 1.400 (35.6) W10 x 12 (W250 x 17.9) 4" (101) 0.210 (5.3) W12 x 170 (W310 x 253) 129/16" (319) 1.560 (39.6) W10 x 15 (W250 x 22.3) 4" (101) 0.270 (6.9) W12 x 190 (W310 x 283) 1211/16" (322) 1.735 (44.1) W10 x 17 (W250 x 25.3) 4" (101) 0.330 (8.4) W12 x 210 (W310 x 313) 123/4" (325) 1.900 (48.3) W10 x 19 (W250 x 28.4) 4" (101) 0.395 (10.0) W12 x 230 (W310 x 342) 127/8" (328) 2.070 (52.6) W10 x 22 (W250 x 32.7) 53/4" (146) 0.360 (9.1) W12 x 252 (W310 x 375) 13" (330) 2.250 (57.2) W10 x 26 (W250 x 38.5) 53/4" (147) 0.440 (11.2) W14 x 22 (W360 x 32.9) 5" (127) 0.335 (8.5) W10 x 30 (W250 x 44.8) 513/16" (148) 0.510 (13.0) W14 x 26 (W360 x 39.0) 5" (127) 0.420 (10.7) W10 x 33 (W250 x 49.1) 715/16" (202) 0.435 (11.0) W14 x 30 (W360 x 44.8) 63/4" (172) 0.385 (9.8) W10 x 39 (W250 x 58) 8" (203) 0.530 (13.5) W14 x 34 (W360 x 51) 63/4" (172) 0.455 (11.6) W10 x 45 (W250 x 67) 8" (203) 0.620 (15.7) W14 x 38 (W360 x 57) 63/4" (172) 0.515 (13.1) W10 x 49 (W250 x 73) 10" (254) 0.560 (14.2) W14 x 43 (W360 x 64) 8" (203) 0.530 (13.5) W10 x 54 (W250 x 80) 101/16" (255) 0.615 (15.6) W14 x 48 (W360 x 72) 8" (203) 0.595 (15.1) W10 x 60 (W250 x 89) 101/16" (256) 0.680 (17.3) W14 x 53 (W360 x 79) 81/16" (205) 0.660 (16.8) W10 x 68 (W250 x 101) 101/8" (257) 0.770 (19.6) W14 x 61 (W360 x 91) 10" (254) 0.645 (16.4) W10 x 77 (W250 x 115) 103/16" (259) 0.870 (22.1) W14 x 68 (W360 x 101) 10" (254) 0.720 (18.3) W10 x 88 (W250 x 131) 101/4" (261) 0.990 (25.1) W14 x 74 (W360 x 110) 101/16" (256) 0.785 (19.9) W10 x 100 (W250 x 149) 103/8" (263) 1.120 (28.4) W14 x 82 (W360 x 122) 101/8" (257) 0.855 (21.7) (W250 x 167) 107/16" (W360 x 134) 141/2" (369) 0.710 (18.0) W10 x 112 (265) 1.250 (31.8) W14 x 90 Dimensions taken from ASTM A6-86. (Continued on next page) 248 Reference Data WIDE FLANGE I-BEAMS (Continued) In. x Lbs./Ft. (mm x kg/m) Flange Width bf Flange Thickness tf Designation Nominal Depth & Weight In. x Lbs./Ft. (mm x kg/m) Flange Width bf Flange Thickness tf W14 x 99 (W360 x 147) 149/16" (370) 0.780 (19.8) W21 x 73 (W530 x 109) 81/4" (209) 0.740 (18.8) W14 x 109 (W360 x 162) 145/8" (371) 0.860 (21.8) W21 x 83 (W530 x 123) 87/8" (213) 0.835 (21.2) W14 x 120 (W360 x 179) 1411/16" (373) 0.940 (23.9) W21 x 93 (W530 x 138) 87/16" (214) 0.930 (23.6) W14 x 132 (W360 x 196) 143/4" (374) 1.030 (26.2) W21 x 101 (W530 x 150) 121/4" (311) 0.800 (20.3) W14 x 145 (W360 x 216) 151/2" (394) 1.090 (27.7) W21 x 111 (W530 x 165) 123/8" (314) 0.875 (22.2) W14 x 159 (W360 x 237) 159/16" (395) 1.190 (30.2) W21 x 122 (W530 x 182) 123/8" (314) 0.960 (24.4) W14 x 176 (W360 x 262) 155/8" (397) 1.310 (33.3) W21 x 132 (W530 x 196) 127/16" (316) 0.035 (26.3) W14 x 193 (W360 x 287) 153/4" (400) 1.440 (36.6) W21 x 147 (W530 x 219) 121/2" (317) 0.150 (29.2) W14 x 211 (W360 x 314) 153/4" (400) 1.560 (39.6) W24 x 55 (W610 x 82) 7" (178) 0.505 (12.8) W14 x 233 (W360 x 347) 157/8" (403) 1.720 (43.7) W24 x 62 (W610 x 92) 71/16" (179) 0.590 (15.0) W14 x 257 (W360 x 382) 16" (406) 1.890 (48.0) W24 x 68 (W610 x 101) 815/16" (227) 0.585 (14.9) W14 x 283 (W360 x 421) 161/8" (409) 2.070 (52.6) W24 x 76 (W610 x 113) 9" (228) 0.680 (17.3) W14 x 311 (W360 x 463) 161/4" (413) 2.260 (57.4) W24 x 84 (W610 x 125) 9" (228) 0.770 (19.6) W14 x 342 (W360 x 509) 163/8" (416) 2.470 (62.7) W24 x 94 (W610 x 140) 91/16" (230) 1.875 (22.2) W14 x 370 (W360 x 551) 161/2" (419) 2.660 (67.6) W24 x 104 (W610 x 155) 123/4" (324) 1.750 (19.0) W14 x 398 (W360 x 592) 169/16" (421) 2.845 (72.3) W24 x 117 (W610 x 174) 123/4" (324) 0.850 (21.6) W14 x 426 (W360 x 634) 1611/16" (424) 3.035 (77.1) W24 x 131 (W610 x 195) 127/8" (327) 0.960 (24.4) W16 x 26 (W410 x 38.8) 51/2" (140) 0.345 (8.8) W24 x 146 (W610 x 217) 127/8" (327) 1.090 (27.7) W16 x 31 (W410 x 46.1) 51/2" (140) 0.440 (11.2) W24 x 162 (W610 x 241) 1215/16" (328) 1.220 (31.0) W16 x 36 (W410 x 53) 7" (178) 0.430 (10.9) W27 x 84 (W690 x 125) 915/16" (252) 0.640 (16.3) W16 x 40 (W410 x 60) 7" (178) 0.505 (12.8) W27 x 94 (W690 x 140) 10" (254) 0.745 (18.9) W16 x 45 (W410 x 67) 7" (178) 0.565 (14.4) W27 x 102 (W690 x 152) 10" (254) 0.830 (21.1) W16 x 50 (W410 x 75) 71/16" (179) 0.630 (16.0) W27 x 114 (W690 x 170) 101/16" (255) 0.930 (23.6) W16 x 57 (W410 x 85) 71/8" (181) 0.715 (18.2) W27 x 146 (W690 x 217) 1315/16" (354) 0.975 (24.8) W16 x 67 (W410 x 100) 101/4" (260) 0.665 (16.9) W27 x 161 (W690 x 240) 14" (355) 1.080 (27.4) W16 x 77 (W410 x 114) 105/16" (262) 0.760 (19.3) W27 x 178 (W690 x 265) 141/16" (357) 1.190 (30.2) W16 x 89 (W410 x 132) 103/8" (263) 0.875 (22.2) W30 x 99 (W760 x 147) 107/16" (265) 0.670 (17.0) W16 x 100 (W410 x 149) 107/16" (265) 0.985 (25.0) W30 x 108 (W760 x 161) 101/2" (267) 0.760 (19.3) W18 x 35 (W460 x 52) 6" (152) 0.425 (10.8) W30 x 116 (W760 x 173) 101/2" (267) 0.850 (21.6) W18 x 40 (W460 x 60) 6" (152) 0.525 (13.3) W30 x 124 (W760 x 185) 101/2" (267) 0.930 (23.6) W18 x 46 (W460 x 68) 61/16" (154) 0.605 (15.4) W30 x 132 (W760 x 196) 109/16" (268) 1.000 (25.4) W18 x 50 (W460 x 74) 71/2" (190) 0.570 (14.5) W30 x 173 (W760 x 257) 15" (381) 1.065 (27.1) W18 x 55 (W460 x 82) 71/2" (190) 0.630 (16.0) W30 x 191 (W760 x 284) 15" (381) 1.185 (30.1) W18 x 60 (W460 x 89) 79/16" (192) 0.695 (17.7) W30 x 211 (W760 x 314) 151/8" (384) 1.315 (33.4) W18 x 65 (W460 x 97) 79/16" (192) 0.750 (19.0) W33 x 118 (W840 x 176) 111/2" (292) 0.740 (18.8) W18 x 71 (W460 x 106) 75/8" (193) 0.810 (20.6) W33 x 130 (W840 x 193) 111/2" (292) 0.855 (21.7) W18 x 76 (W460 x 113) 11" (279) 0.680 (17.3) W33 x 141 (W840 x 210) 111/2" (292) 0.960 (24.4) W18 x 86 (W460 x 128) 111/16" (281) 0.770 (19.6) W33 x 152 (W840 x 226) 119/16" (294) 1.055 (26.8) W18 x 97 (W460 x 144) 111/8" (282) 0.870 (22.1) W33 x 201 (W840 x 299) 153/4" (400) 1.150 (29.2) W18 x 106 (W460 x 158) 113/16" (284) 0.940 (23.9) W36 x 135 (W920 x 201) 1115/16" (303) 0.790 (20.1) W18 x 119 (W460 x 177) 111/4" (286) 1.060 (26.9) W36 x 150 (W920 x 223) 12" (305) 0.940 (23.9) W21 x 44 (W530 x 66) 61/2" (165) 0.450 (11.4) W36 x 160 (W920 x 238) 12" (305) 1.020 (25.9) W21 x 50 (W530 x 74) 61/2" (165) 0.535 (13.6) W36 x 170 (W920 x 253) 12" (305) 1.100 (27.9) W21 x 57 (W530 x 85) 69/16" (167) 0.650 (16.5) W36 x 182 (W920 x 271) 121/16" (306) 1.180 (30.0) W21 x 62 (W530 x 92) 81/4" (209) 0.615 (15.6) W36 x 194 (W920 x 289) 121/8" (308) 1.260 (32.0) (W530 x 101) 81/4" (W920 x 313) 123/16" (309) 1.360 (34.5) W21 x 68 (209) 0.685 (17.4) Dimensions taken from ASTM A6-86. 249 W36 x 210 Reference Data Designation Nominal Depth & Weight Reference Data MSS TO B-LINE & FEDERAL SPECIFICATION CROSS REFERENCE Reference Data MSS SP-69 MSS SP-58 B-Line Part No. A-A-1192A WW-H-171E MSS SP-69 MSS SP-58 Type 1 Type 1 Type 1 Type 1 Type 1* Type 1 Type 1 Type 1 Type 1 Type 1 Type 3 Type 3 Type 4 Type 4 Type 5 Type 5 Type 5 Type 6 Type 7 Type 7 Type 7 Type 7 Type 7 Type 8 Type 8 Type 8 Type 8 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 11 Type 11 Type 12 Type 12 Type 12 Type 12 Type 13 Type 14 Type 15 Type 15 Type 16 Type 17 Type 18 Type 18 Type 18 Type 18 Type 19 B3100 B3100C B3100F B3102 B3104 B3104CT B3105 B3106 B3108 B3109 B3144 B3146 B3140 B3142 B3690 B3690C B3690F B3171 B3172 B3172C B3172CT B3172CTC B3172F B3373 B3373C B3373CT B3373CTC B3170 B3170CT B3170CTC B3170NF B3170NFC B3170NFF B3225 B3225CT B3198H B3198HCT B3198R B3198RCT B3202 B3201 B3224 B3224CT B3222 B3200 B2500 B25003 B2505-B2508 B3014 B303-B309 Type 1 Type 1 Type 1 Type 1 Type 12 Type 12 --Type 1 -Type 3 Type 3 Type 4 Type 4 ---Type 6 Type 7 Type 7 Type 7 Type 7 Type 7 Type 8 Type 8 Type 8 Type 8 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 --Type 25 Type 25 Type 25 Type 25 Type 13 Type 14 Type 15 Type 15 Type 16 Type 17 Type 19 --Type 18 Type 19 Type 19 Type 19 Type 19 & 23 Type 19 & 23 Type 21 Type 21 Type 22 Type 23 Type 23 Type 23 Type 24 Type 24 Type 25 Type 26 Type 26 Type 27 * For all finishes excluding plain. Type 28 Type 29 Type 30 Type 31 Type 32 Type 33 Type 34 Type 34 Type 34 Type 34 Type 34 Type 35 Type 35 Type 36 Type 37 Type 37 Type 37 Type 38 Type 38 Type 38 Type 39A & 39B Type 40 Type 41 Type 41 Type 41 Type 43 Type 44 Type 44 Type 45 Type 46 Type 48 Type 49 Type 57 250 B-Line Part No. A-A-1192A WW-H-171E B321 Type 19 B3031 Type 19 B3033 Type 19 & 23 B3034 Type 19 & 23 B3050 Type 21 B3055 Type 21 B3083 Type 22 B351L Type 23 B3036L Type 23 B3037 Type 23 B3188 Type 24 B3188C Type 24 B3045 Type 53 B2400 -B3180 Type 26 B3040 Type 54 B3291, B3292 B3294, B3296 Type 28 B3298 B3293, B3295 Type 29 B3297 B3054 Type 30 B3063 Type 32 B3066 Type 33 B3067 Type 34 B3058 Type 35 B3060 Type 35 B3060L Type 35 B3062 Type 35 B3070 Type 35 B3891-B3897 Type 35 B3991 & B3993 Type 35 B3095 Type 37 B3090 Type 38 B3092 Type 38 B3097 Type 38 B3091 Type 39 B3093 Type 39 B3096 Type 39 B3160-B3165 Type 40A & 40B B3151 Type 41 B3114 Type 42 B3122 Type 42 B3122A Type 42 B3110 Type 44 B3117SL Type 45 B3120 Type 45 B3119SL Type 46 B3118SL Type 47 B3262 Type 49 B3264 Type 50 B3080S & L -- Reference Data A-A-1192A WW-H-171E Type 1 Type 1 Type 1 Type 1 Type 1 Type 1 Type 1 Type 3 Type 3 Type 4 Type 4 Type 5 Type 5 Type 5 Type 6 Type 7 Type 7 Type 7 Type 7 Type 7 Type 8 Type 8 Type 8 Type 8 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 12 Type 12 Type 12 Type 12 Type 12 Type 13 Type 14 Type 15 Type 15 Type 16 Type 17 Type 18 Type 19 Type 19 Type 19 Type 19 Type 19 & 23 Type 19 & 23 Type 21 Type 21 B-Line Part No. B3100 B3100C B3100F B3102 B3104 B3106 B3108 B3144 B3146 B3140 B3142 B3690 B3690C B3690F B3171 B3172 B3172C B3172CT B3172CTC B3172F B3373 B3373C B3373CT B3373CTC B3170 B3170CT B3170CTC B3170NF B3170NFC B3170NFF B3104 B3104C B3104CT B3104CTC B3104F B3202 B3201 B3224 B3224CT B3222 B3200 B3014 B303-B309 B321 B2500 B3031 B3033 B3034 B3050 B3055 MSS SP-69 MSS SP-58 A-A-1192A WW-H-171E B-Line Part No. MSS SP-69 MSS SP-58 Type 1 Type 1 Type 1 Type 1 Type 1 Type 1 Type 1 Type 3 Type 3 Type 4 Type 4 Type 5 Type 5 Type 5 Type 6 Type 7 Type 7 Type 7 Type 7 Type 7 Type 8 Type 8 Type 8 Type 8 Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 1* -Type 1 --Type 13 Type 14 Type 15 Type 15 Type 16 Type 17 Type 18 Type 19 Type 19 Type 18 Type 19 Type 19 & 23 Type 19 & 23 Type 21 Type 21 Type 22 Type 23 Type 23 Type 23 Type 24 Type 24 Type 25 Type 25 Type 25 Type 25 Type 26 B3083 B351L B3036L B3037 B3188 B3188C B3198H B3198HCT B3198R B3198RCT B3180 B3291, B3292 B3294, B3296 B3298 B3293, B3295 B3297 B3054 B3063 B3066 B3067 B3058 B3060 B3060L B3062 B3070 B3891-B3897 B3991 & B3993 B3095 B3090 B3092 B3097 B3091 B3093 B3096 B3160-3165 B3151 B3114 B3122 B3122A B3110 B3117SL B3120 B3119SL B3118SL B3262 B3264 B3045 B3040 Type 22 Type 23 Type 23 Type 23 Type 24 Type 24 Type 12 Type 12 Type 12 Type 12 Type 26 Type 28 Type 29 Type 30 Type 32 Type 33 Type 34 Type 35 Type 35 Type 35 Type 35 Type 35 Type 35 Type 35 Type 37 Type 38 Type 38 Type 38 Type 39 Type 39 Type 39 Type 40A & 40B Type 41 Type 42 Type 42 Type 42 Type 44 Type 45 Type 45 Type 46 Type 47 Type 49 Type 50 Type 53 Type 54 * For all finishes excluding plain. 251 Type 28 Type 29 Type 30 Type 31 Type 32 Type 33 Type 34 Type 34 Type 34 Type 34 Type 34 Type 35 Type 35 Type 36 Type 37 Type 37 Type 37 Type 38 Type 38 Type 38 Type 39A & 39B Type 40 Type 41 Type 41 Type 41 Type 43 Type 44 Type 44 Type 45 Type 46 Type 48 Type 49 Type 25 Type 27 Reference Data FEDERAL SPECIFICATION TO B-LINE & MSS CROSS REFERENCE Reference Data B-LINE COMPLIANCES & APPROVALS Part No. B351L B2400 MSS SP-69 MSS SP-58 Type 23 A-A-1192A WW-H-171E Type 23 UL Listed 3/8"-16 thru 3/4"-10 Reference Data 3/4"- 8” Max. Pipe Size 6” (150) -Yes Yes Yes (Top Flange Only) 3/8"-16 thru 3/4"-10 3/8"-16 & 1/2"-13 3/8"-16 thru 3/4"-10 Yes ---3/8"-16 thru 7/8"-9 ------------------ Type 26 -- Type 18 Type 18 Type 18 Type 18 Type 19 Type 19 & 23 Type 19 & 23 Type 23 Type 23 Type 27 Type 25 Type 21 Type 30 Type 19 --Type 18 Type 19 Type 19 & 23 Type 19 & 23 Type 23 Type 23 Type 27 Type 53 Type 21 Type 30 B3055 B3058 B3060 B3060L B3062 B3063 B3066 B3067 B3070 B3080S & L B3083 B3090 B3091 B3093 B3095 B3096 B3097 Type 21 Type 34 Type 34 Type 34 Type 34 Type 31 Type 32 Type 33 Type 34 Type 57 Type 22 Type 37 Type 38 Type 38 Type 36 Type 38 Type 37 Type 21 Type 35 Type 35 Type 35 Type 35 Type 32 Type 33 Type 34 Type 35 -Type 22 Type 38 Type 39 Type 39 Type 37 Type 39 Type 38 B3100 B3100C Type 1 Type 1 Type 1 Type 1 3/4" (20) thru 12" (300) -- B3100F B3102 Type 1 Type 1 Type 1 -- 3/4" (20) thru 12" (300) -- B3104 B3104C B3104CT B3104CTC Type 1* Type 1* Type 1 Type 1 Type 12 Type 12 Type 12 Type 12 3/4" (20) thru 4" (100) ---- B3104F B3105 Type 1* Type 1 Type 12 -- 3/4" (20) thru 4" (100) -- B3106 B3108 B3109 B3110 B3114 B3117SL B3118SL B3119SL B3120 B3122 B3122A Type 1 Type 1 Type 1 Type 43 Type 41 Type 44 Type 46 Type 45 Type 44 Type 41 Type 41 -Type 1 -Type 44 Type 42 Type 45 Type 47 Type 46 Type 45 Type 42 Type 42 B2500 B2503 B2505-B2508 B3014 B3031 B3033 B3034 B3036L B3037 B3040 B3045 B3050 B3054 252 ------------ Reference Data B-LINE COMPLIANCES & APPROVALS MSS SP-69 MSS SP-58 A-A-1192A WW-H-171E UL Listed Type 4 Type 4 Type 3 Type 3 Type 40 Type 39A & 39B Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 6 Type 7 Type 7 Type 7 Type 7 Type 7 Type 26 Type 4 Type 4 Type 3 Type 3 Type 41 Type 40A & 40B Type 10 Type 10 Type 10 Type 10 Type 10 Type 10 Type 6 Type 7 Type 7 Type 7 Type 7 Type 7 Type 26 3/4" (20) B3188 B3188C Type 24 Type 24 Type 24 Type 24 3/4" (20) B3198H Type 12 Type 25 -- B3198HCT B3198R Type 12 Type 12 Type 25 Type 25 --- B3198RCT B3200 Type 12 Type 17 Type 25 Type 17 --- B3201 B3202 Type 14 Type 13 Type 14 Type 13 --- B3203 -- -- 3/8"-16 Type 16 -Type 15 Type 15 Type 48 Type 49 Type 16 -Type 15 Type 15 Type 49 Type 50 3/8"-16 thru 7/8"-9 Up To 2" (50) Pipe ----- Type 28 Type 28 -- Type 29 Type 29 B3373 B3373C Type 8 Type 8 Type 8 Type 8 B3373CT Type 8 Type 8 -- B3373CTC B3690 B3690C B3690F B3891-B3897 B3991 B3993 Type 8 Type 5 Type 5 Type 5 Type 35 Type 35 Type 35 Type 8 ------- -------- B3993A Type 35 -- -- B3140 B3142 B3144 B3146 B3151 B3160-B3165 B3170 B3170CT B3170CTC B3170NF B3170NFC B3170NFF B3171 B3172 B3172C B3172CT B3172CTC B3172F B3180 B3222 B3223 B3224 B3224CT B3262 B3264 B3291, B3292 B3294, B3296 B3297 B3293, B3295 B3297 253 thru 12" (300) --------1/2" (15) thru 4" (100) ---------thru 12" (300) -- thru 7/8"-9 -3/4" (20) thru 8" (200) -- Reference Data Part No. Reference Data TRAPEZE HANGERS USING B-LINE STRUT OR ANGLE IRON Trapeze Length Nominal Pipe Size 21/2" (65) or less 11/2" 11/2" 11/2" 4" (100) 2" x 11/2" x 3/16" B22SH Reference Data (457.2) 24" (609.6) 11/2" x 11/2" x 3/16" B26SH 2" x 11/2" x 3/16" B22SH 2" x 11/2" x 3/16" B22SH 2" x 11/2" x 3/16" B22SH 30" (762.0) 2" x 11/2" x 3/16" B22SH 2" x 11/2" x 3/16" B22SH 2" x 11/2" x 3/16" B22SH 2" x 11/2" x 3/16" B22SH 36" (914.4) 2" x 11/2" x 3/16" B22SH 2" x 11/2" x 3/16" B22SH 21/2" x 11/2" x 3/16" B12SH 21/2" x 11/2" x 3/16" B12SH 48" (1219.2) 21/2" x 11/2" x 3/16" B12SH 21/2" x 11/2" x 3/16" B12SH 21/2" x 11/2" x 3/16" B12SH 3" x 2" x 3/16" B11SH 60" (1524.0) 21/2" x 11/2" x 3/16" B12SH 21/2" x 11/2" x 3/16" B12SH 3" x 2" x 3/16" B11SH 3" x 2" x 3/16" B11SH 72" (1828.8) 21/2" x 11/2" x 3/16" B12SH 3" x 2" x 3/16" B11SH 3" x 2" x 3/16" B11SH 3" x 2" x 1/4" B11SH 84" (2133.6) 3" x 2" x 3/16" B11SH 3" x 2" x 3/16" B11SH 3" x 2" x 1/4" B11SH 3" x 2" x 1/4" B11SH 96" (2438.4) 3" x 2" x 3/16" B11SH 3" x 2" x 1/4" B11SH 3" x 2" x 1/4" B11SH 31/2" x 21/2" x 5/16" B12SHA 108" (2743.2) 3" x 2" x 3/16" B11SH 3" x 2" x 1/4" B11SH 31/2" x 21/2" x 5/16" B12SHA 31/2" x 21/2" x 5/16" B12SHA 120" (3048.0) 3" x 2" x 1/4" B11SH 3" x 2" x 1/4" B11SH 31/2" x 21/2" x 5/16" B12SHA 31/2" x 21/2" x 5/16" B12SHA Trapeze 11/2" 11/2" 18" x x B26SH 3/16" 31/2" (90) 11/2" x x B26SH 3/16" 3" (80) x x B26SH 3/16" Nominal Pipe Size Length 5" (125) 2" x 11/2" x B22SH 3/16" 8" (200) 6" (150) 21/2" 11/2" x x B12SH 3/16" 10" (250) 3/16" 3" x 2" x B11SH 3" x 2" x 1/4" B11SH 18" (457.2) 24" (609.6) 21/2" x 11/2" x 3/16" B12SH 21/2" x 11/2" x 3/16" B12SH 3" x 2" x 3/16" B11SH 3" x 2" x 1/4" B11SH 30" (762.0) 21/2" x 11/2" x 3/16" B12SH 3" x 2" x 3/16" B11SH 3" x 2" x 1/4" B11SH 3" x 2" x 1/4" B11SH 36" (914.4) 3" x 2" x 3/16" B11SH 3" x 2" x 3/16" B11SH 31/2" x 21/2" x 1/4" B12SHA 31/2" x 21/2" x 5/16" B12SHA 48" (1219.2) 3" x 2" x 3/16" B11SH 3" x 2" x 1/4" B11SH 31/2" x 21/2" x 5/16" B12SHA 4" x 3" x 5/16" B12SHA 60" (1524.0) 3" x 2" x 1/4" B11SH 31/2" x 21/2" x 5/16" B12SHA 4" x 3" x 5/16" B12SHA 5" x 31/2" x 5/16" B11SHA 72" (1828.8) 31/2" x 21/2" x 5/16" B12SHA 4" x 3" x 5/16" B12SHA 4" x 3" x 5/16" B12SHA 5" x 31/2" x 5/16" B11SHA 84" (2133.6) 31/2" x 21/2" x 5/16" B12SHA 4" x 3" x 5/16" B12SHA 5" x 31/2" x 5/16" B11SHA 6" x 4" x 1/4" B12SHA4 96" (2438.4) 31/2" x 21/2" x 5/16" B12SHA 4" x 3" x 5/16" B12SHA 5" x 31/2" x 5/16" B11SHA 6" x 4" x 1/4" B12SHA4 108" (2743.2) 31/2" x 21/2" x 5/16" B12SHA 4" x 3" x 5/16" B12SHA 5" x 31/2" x 5/16" B11SHA 6" x 4" x 3/8" B11SHA4 120" (3048.0) 4" x 3" x 5/16" B12SHA 5" x 31/2" x 5/16" B11SHA 6" x 4" x 1/4" B12SHA4 6" x 4" x 3/8" B11SHA4 Based on NFPA 13-1999, Table 6-1.1.3 (a) & Table 6-1.1.3 (b). 254 Index Page Part No. Page Part No. Page 3/8FWSS6 .......................................... 209 B3064 .................................................. 139 B3134W ................................................ 64 ANH ..................................................... 180 B3066 .................................................. 140 B3140 .................................................... 65 ATR ...................................................... 159 B3067 .................................................. 141 B3142 .................................................... 66 B22I ...................................................... 134 B3068 .................................................. 139 B3144 .................................................... 67 B32I ...................................................... 135 B3070 .................................................. 144 B3146 .................................................... 68 B52I ...................................................... 136 B3080L ................................................ 147 B3147A ...................................... 106-107 B200 .................................................... 165 B3080S ............................................... 147 B3147B ...................................... 106-107 B201 .................................................... 165 B3082 .................................................. 151 B3148 .................................................... 69 B202 .................................................... 165 B3083 .................................................. 146 B3149 .................................................... 69 B202-1 ................................................ 165 B3083WO ........................................... 146 B3151 .................................................. 125 B202-2 ................................................ 165 B3084 .................................................. 150 B3153 .................................................. 125 B218 ....................................................... 80 B3085 .................................................. 148 B3154 .................................................. 126 B219 ....................................................... 81 B3086 .................................................. 149 B3155 .................................................. 126 B303 thru B309 .................................. 29 B3088 .................................................... 92 B3160 ......................................... 118-123 B312 ....................................................... 30 B3088S .................................................. 93 B3161 ......................................... 118-123 B321 ....................................................... 29 B3088T .................................................. 92 B3162 ......................................... 118-123 B351L .................................................... 25 B3088ST ............................................... 93 B3163 ......................................... 118-123 B379 ....................................................... 82 B3089 .................................................... 95 B3164 ......................................... 118-123 B386 ....................................................... 55 B3090 .............................................. 96-97 B3165 ......................................... 118-123 B479 ....................................................... 83 B3092 ......................................... 100-101 B3170 .................................................... 49 B655 .................................................... 164 B3093 ......................................... 102-103 B3170CT ............................................... 50 B656 .................................................... 164 B3095 .............................................. 98-99 B3170CTC ............................................ 50 B1999.....................................................191 B3096 .................................................... 94 B3170NF ............................................... 49 B2400 .............................................. 70-71 B3100 .............................................. 40-41 N3170NFC ............................................ 49 B2417 .................................................. 106 B3100C ........................................... 40-41 B3170NFF ............................................ 49 B2500 .................................................. 130 B3100F ............................................ 40-41 B3171 .................................................... 54 B2501 .................................................. 129 B3102 .................................................... 44 B3175 .................................................... 53 B2503 .................................................. 133 B3104 .................................................... 42 B3175CT ............................................... 53 B2505 .................................................. 132 B3104C ................................................. 42 B3188 ......................................... 154-155 B2506 .................................................. 132 B3104CT ............................................... 43 B3188C ...................................... 154-155 B2507 .................................................. 132 B3104CTC ............................................ 43 B3190 .................................................... 56 B2508 .................................................. 132 B3104F .................................................. 42 B3191 .................................................... 56 B3014 .................................................. 131 B3106 .................................................... 47 B3198H ................................................. 51 B3014N ............................................... 131 B3106V .................................................. 47 B3198HCT ............................................ 52 B3019 .................................................. 129 B3108 .................................................... 45 B3198R ................................................. 51 B3031 .................................................... 26 B3109 .................................................... 46 B3198RCT ............................................ 52 B3033 .................................................... 27 B3110 .................................................... 73 B3199 .................................................. 143 B3034 .................................................... 28 B3114 .................................................... 74 B3199CT ............................................ 143 B3036L .................................................. 25 B3114R ................................................. 88 B3200 .................................................. 153 B3037 .................................................... 26 B3117R ................................................. 89 B3200L ................................................ 153 B3040 .................................................... 30 B3117SL ............................................... 84 B3201 .................................................. 156 B3042 .................................................... 35 B3118SL ............................................... 85 B3201L ................................................ 156 B3045 .................................................... 35 B3119SL ............................................... 86 B3201LWO ......................................... 156 B3050 .................................................... 32 B3120 .................................................... 77 B3201WO ........................................... 156 B3052 .................................................... 36 B3122 .................................................... 75 B3202 .................................................. 158 B3054 .................................................... 33 B3122A .................................................. 76 B3203 .................................................. 157 B3055 .................................................... 31 B3124 .................................................... 78 B3205 .................................................. 159 B3058 .................................................. 145 B3126 .................................................... 79 B3205L ................................................ 159 B3060 .................................................. 143 B3132 .................................................... 63 B3210 .................................................. 160 B3060L ................................................ 144 B3132W ................................................ 63 B3210L ................................................ 160 B3062 .................................................. 145 B3134 .................................................... 64 B3210X ............................................... 161 255 Index Part No. Index Part No. Page Part No. Page Part No. Page Index B3210XL ............................................. 161 B3690 .................................................... 39 CM2 ..................................................... 173 B3211 .................................................. 160 B3690C ................................................. 39 CNNK .................................................. 171 B3211L ................................................ 160 B3690F .................................................. 39 CNP ..................................................... 170 B3211X ............................................... 161 B3891 ......................................... 110-113 DB__DS Series ........................ 198-199 B3211XL ............................................. 161 B3892 ......................................... 110-113 DB5 ...................................................... 194 B3212 .................................................. 162 B3893 ......................................... 110-113 DB10 .................................................... 194 B3213 .................................................. 162 B3894 ......................................... 110-113 DB10 Series ...................................... 196 B3220 .................................................. 164 B3895 ......................................... 110-113 DB20 .................................................... 194 B3222 .................................................. 153 B3896 ......................................... 110-113 DB30 .................................................... 194 B3223 .................................................. 157 B3897 ......................................... 110-113 DB40 .................................................... 194 B3224 .................................................. 158 B3993 ......................................... 114-117 DB48 .................................................... 194 B3224CT ............................................ 158 B3993B ...................................... 114-117 DB610 ................................................. 195 B3227 .................................................. 163 BD40 .................................................... 137 DB620 ................................................. 195 B3228 .................................................. 163 BE5-8 .................................................. 137 DB630 ................................................. 195 B3234 .................................................. 166 BE9-12 ................................................ 137 DB640 ................................................. 195 B3248 .................................................. 165 BH-2-4 ................................................... 58 DB648 ................................................. 195 B3256 .................................................. 108 BH-5-8 ................................................... 58 DBE10 Series ................................... 201 B3257 .................................................. 109 BH-9-12 ................................................ 58 DBM ..................................................... 193 B3262 .................................................... 57 BH-2-4-R .............................................. 58 DBM__ ................................................ 197 B3264 .................................................... 87 BH-5-8-R .............................................. 58 DBM__CT ........................................... 197 B3281 ......................................... 104-105 BH-9-12-R ........................................... 58 DBP ...................................................... 193 B3282 ......................................... 104-105 BKC100 .............................................. 212 DBR__ Series ................................... 200 B3283 ......................................... 104-105 BKC150 .............................................. 212 DBR10-12 .......................................... 201 B3284 ......................................... 104-105 BKC200 .............................................. 212 DC-1 thru DC-12 ............................. 208 B3285 ......................................... 104-105 BKCC .................................................. 214 DC22S__ ............................................. 206 B3286 ......................................... 104-105 BKCP ................................................... 214 DCR38__ ............................................ 208 B3287 ......................................... 104-105 BKP10063 .......................................... 213 DCSPSS4 ........................................... 209 B3291 .................................................... 34 BKP10094 .......................................... 213 DCWM__ ............................................ 207 B3292 .................................................... 34 BKP15094 .......................................... 213 DS16 x 2 ............................................. 163 B3293 .................................................... 34 BKP15125 .......................................... 213 HES ............................................. 184-185 B3294 .................................................... 34 BKP20125 .......................................... 213 HESL ........................................... 184-185 B3295 .................................................... 34 BKP20188 .......................................... 213 HME ............................................ 176-177 B3296 .................................................... 34 BKW063 ............................................. 212 HMLE ......................................... 176-177 B3297 .................................................... 34 BKW094 ............................................. 212 HMLT .......................................... 178-179 B3298 .................................................... 34 BKW125 ............................................. 212 HMT ............................................ 178-179 B3362 .................................................... 26 BKW188 ............................................. 212 HSL ............................................. 182-183 B3363 .................................................... 26 BL1400 .................................................. 58 HS ................................................ 182-183 B3364 .................................................... 26 BL1410 .................................................. 58 ISO ....................................................... 191 B3365 .................................................... 26 BL1420 .................................................. 58 N2500 .................................................. 130 B3367 .................................................... 30 BL1430 .................................................. 58 NNP ..................................................... 170 B3373 .................................................... 61 BL1440 .................................................. 58 NVD ...................................................... 172 B3373C ................................................. 61 BL1450 .................................................. 58 OM ............................................... 174-175 B3373CT ............................................... 62 BL1460 .................................................. 58 OML ............................................ 174-175 B3373CTC ............................................ 62 BL1470 .................................................. 58 RHB ..................................................... 181 B3380 .................................................... 91 BL1480 .................................................. 58 RHC ..................................................... 181 B3381 .................................................... 91 BL1490 .................................................. 58 RHD ..................................................... 181 B3382 .................................................... 91 BVP ...................................................... 190 SFHN38SS6 ...................................... 209 B3383 .................................................... 91 BVS ...................................................... 172 SHE ............................................. 186-187 B3384 .................................................... 91 BVT ...................................................... 189 VRP ...................................................... 171 B3386 .................................................... 91 CLDP10 .............................................. 202 B3387 .................................................... 91 CM1 ..................................................... 173 256 INTRODUCTION Cooper B-Line®, Inc. is a leading manufacturer and fabricator of metal products used in the support of pipe and equipment for industrial, commercial, utility, and OEM installations. Cooper B-Line is proud of the exacting standards of research, design, engineering, and manufacturing that go into each and every product that comprise our pipe hanger product line. Our customers have access to the most complete support systems offered in the industry, including pipe hangers, metal framing, cable tray, slotted angle, fasteners, telecom, enclosures and anchors. Many of Cooper B-Line's products are listed by Underwriters' Laboratories, Inc. All Cooper B-Line products are manufactured to meet or exceed industry standards set for their design and manufacture. Cooper B-Line products are produced in four modern plants consisting of over 1,000,000 square feet. These facilities are located in Highland, Illinois; Troy, Illinois; Reno, Nevada, and Sherman, Texas. Regional sales and distribution centers are located throughout the United States stocking standard Cooper B-Line products for quick service and delivery. This catalog is designed to be helpful to engineers and contractors in the application and selection of pipe hanger and support products for construction and maintenance. If a unique application requires a special product not included in this catalog, Cooper B-Line engineering personnel are ready to furnish design consultation and realistic material estimates. In addition, sales representatives with engineering know-how are located throughout the United States and abroad for your convenience. Warning All hanger products in this catalog are intended for installation and service as illustrated or described. We are aware that these products have been used successfully for purposes other than for which they were designed. We also know that on occasion, these products have failed when used as tools for erection or for some purpose other than intended use. We caution against misapplication which may result in failure or accident. Examples of this misapplication which can result in failure include: the use of a beam clamp on a beam other than described in the catalog; the use of concrete inserts as a anchor for pulling pipe up to the required elevation; and the suspension of clevis hangers, one under another, which can result in the accumulative load greater than the pipe hanger will support. Cooper B-Line pipe hanger products are manufactured in accordance with industry standards. Our customers should exercise care to use these products properly so as to avoid an on-the-job accident. Consult the Home Office for assistance of proper installation and use of the products in this catalog. SINCE 1924 MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTING INDUSTRY, INC. Cooper B-Line 509 West Monroe Street P.O. Box 326 Highland, Illinois 62249-0326 Phone: 800-851-7415 www.cooperbline.com Pipe Hangers & Supports Other Cooper B-Line Product Lines Cable Tray Systems Strut Systems (Bolted Framing) Electrical Enclosures Electronic Enclosures Spring Steel Fasteners Cable Runway & Relay Racks (CommData) Meter Mounting & Distribution Equipment Anchors PH-08 www.cooperbline.com B - V O CCAALL with Cooper B-Line ” Questions, Comments, Suggestions? ““ SSMM Voice Of the Customer...Actively Listening bvocal@cooperindustries.com 618-654-2184 ext. 456 SYSTEMS THAT MAKE SENSE Cooper Industries, Ltd. 600 Travis, Ste. 5800 Houston, TX 77002-1001 Phone: 713-209-8400 www.cooperindustries.com © 2008 Cooper B-Line, Inc. Pipe Hangers & Supports PH-08 Cooper B-Line 509 West Monroe Street Highland, IL 62249 Phone: 800-851-7415 Fax: 618-654-1917 Printed in U.S.A. 20908 Pipe Hangers, Pipe Clamps, Beam Clamps, Upper Attachments, Pipe Rollers & Roller Supports, Pipe Suppors-Guides-Shields-Saddles, Concrete Inserts, Brackets, Threaded Accessories, Vibra Trol®, Roof-Top Supports

Pipe Hangers & Supports Cooper

Add this document to collection(s)

Add this document to saved

Suggest us how to improve StudyLib