9/12/22, 10:04 AM Rockwell Automation Listen Think Solve Center Support logo Care Analog wireless sensing Rockwell Automation logo Get Support Training & Webinars Online Forum My TechConnect rehanshams… Customer 03-Feb-2022 - Important product notice regarding Microsoft vulnerability patch (MS KB5004442) ID: QA43332 | Access Levels: Everyone Analog wireless sensing READ LATER: Email this page Print To find an answer using a previous Answer ID, click here SEARCH Document ID QA43332 Published Date 02/15/2020 Summary https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1073125/loc/en_US#__highlight ADD TO FAVORITES Feedback Search Knowledgebase... Top 1/4 9/12/22, 10:04 AM Analog wireless sensing Analog wireless sensing Question Does Allen-Bradley / Rockwell Automation offer an analog wireless sensor solution? Answer No, we do not offer wireless sensors. The only way possible with our existing product portfolio and network architecture structure, is as follows: Solution Use an IO-Link sensor capable The sensor needs to be mounted at the bottom of the container and will read the difference of pressure proportional to the amount of liquid present. 836P Solid-State Pressure Sensors On-Line Product Directory + IO-Link Master The IO-Link sensor needs to be connected to an IO-Link master. Which is offered in two flavors (presentations): Armorblock style and a Point-IO module style. The IO-Link master will interface between the sensor and the industrial Ethernet network. Feedback ArmorBlock I/O Modules On-Line Product Directory POINT I/O Modules On-Line Product Directory Top + https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1073125/loc/en_US#__highlight 2/4 9/12/22, 10:04 AM Analog wireless sensing Rockwell Wireless Switch Stratix 5100 Wireless Access Point at the tank area Stratix 5100 Wireless Access Point/Workgroup Bridge On-Line Product Directory + Rockwell Wireless Switch Stratix 5100 Wireless Access Point at control cabinet / panel Stratix 5100 Wireless Access Point/Workgroup Bridge On-Line Product Directory + Logix based processor (control logix or compact logix) Software Studio 5000 version 20 or higher End user should be able to read the data from the sensor (actual current pressure value) at the software or at a control panel HMI. Was this answer helpful? Yes No Feedback RATE CONTENT Top DISCLAIMER https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1073125/loc/en_US#__highlight 3/4 9/12/22, 10:04 AM Analog wireless sensing This knowledge base web site is intended to provide general technical information on a particular subject or subjects and is not an exhaustive treatment of such subjects. Accordingly, the information in this web site is not intended to constitute application, design, software or other professional engineering advice or services. Before making any decision or taking any action, which might affect your equipment, you should consult a qualified professional advisor. ROCKWELL AUTOMATION DOES NOT WARRANT THE COMPLETENESS, TIMELINESS OR ACCURACY OF ANY OF THE DATA CONTAINED IN THIS WEB SITE AND MAY MAKE CHANGES THERETO AT ANY TIME IN ITS SOLE DISCRETION WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TO USERS "AS IS." IN NO EVENT SHALL ROCKWELL BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS PROFIT OR DAMAGE, EVEN IF ROCKWELL AUTOMATION HAVE BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGES. ROCKWELL AUTOMATION DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED IN RESPECT OF THE INFORMATION (INCLUDING SOFTWARE) PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, AND NON-INFRINGEMENT. Note that certain jurisdictions do not countenance the exclusion of implied warranties; thus, this disclaimer may not apply to you. www.rockwellautomation.com Copyright © 2022 Rockwell Automation, Inc. All Rights Reserved. Top https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1073125/loc/en_US#__highlight 4/4
