In 2020, 5G gained momentum with large-scale commercial use, facilitating changes in thousands of industries. 5G
enables a wide range of network services, meeting a variety of requirements — it delivers connections anytime,
anywhere, and ten times faster than the past generations of networks. Things are becoming more connected,
requiring massive connections with low power consumption. At the same time, industries are asking for larger uplink
bandwidth, lower latency, higher reliability, and higher-precision positioning. In response to these requirements, 5G
networks will evolve to 1+N — one high-bandwidth fundamental network that provides ubiquitous coverage plus N
application requirements from thousands of industries, that can be added on demand.
5G Network: 1+N
N Capabilities on Demand
Sensing
High reliability
High uplink capability
V2X
Low latency
High-precision positioning
1 High-Bandwidth Fundamental Network for Ubiquitous Connectivity
The 1+N 5G network will drive all bands to evolve to 5G:
• High-bandwidth spectrum, such as 2.6 GHz/C band/4.9 GHz, is necessary to build a fundamental network.
• Other frequency bands, such as FDD, SUL, and mmWave, can also offer differentiated advantages in terms of
performance.
All Bands to 5G, 1+N Multi-Band Target Network
All Bands to 5G, 1+N Multi-Band Target Network
1
Mid-Band as Core for High-Bandwidth Network
N
Other Bands for Differentiated Advantages
mmWave
SUL fn
Low per-bit costs
SUL f1
FDD fn
Leading experience
FDD f2
FDD f1
However, the construction of 5G networks leads to new challenges in antenna deployment:
• The existing antennas for 2G, 3G and 4G have occupied the best positions. This means that few favorable positions
are left for adding new antennas, preventing 5G massive MIMO from achieving its optimal performance.
• New antennas place more burden on sites, requiring more cost and longer time to market, hindering the
deployment of 5G.
Product
Category
In response to the latest 5G trends and deployment challenges, 1+1 2.0 antenna modernization strategy becomes
the industry consensus.
5G Centric Deployment, Better Performance

1 + 1parameters,
2.0, 5G Centric,
5G MIMO is deployed at the optimal
5G and 4G antennas share engineering
ensuring Better
that massive
position for the ultimate 5G network performance.

Existing antennas are upgraded and provide the same coverage, without additional network optimization required.
2G+3G+4G+5G
4G
3G
2G
5G
4G Enhancement, Optimal Fundamental Network

Low-frequency 4T4R and intermediate frequency 8T8R networks serve as the fundamental network, improving
the 4G experience and reducing the gap in experience between 4G and 5G.
4G+5G Synergy
4G+5G
5G
4G
4G as foundation
5G
4G
5G
Simplified Deployment, Reduced TCO/TTM

TCO is reduced due to lower tower rentals and less site reconstruction needs.

TTM is shorter due to simplified deployment, environment-friendly processes, and reduction of new site permit
requirements.
Product
Category
Passive Antenna Platforms: Enhancing the Fundamental 4G/5G Target Network
Paris Platform
Munich Pro Platform
Tri-Low bands 4T4R Co-deployment Antenna
Intermediate-Band 4T4R or 8T8R Antenna
Width: 499 mm
• Triple low-band 700/800/900 MHz 4T4R codeployment, avoiding PIM interference between 700
MHz and 800 MHz.
• Supports antenna sharing with two or three operators.
• SDIF (Signal Direct Injection Feeding) technology inside.
Width*Depth: 469*206 mm
• 1.8~2.6 GHz 8T8R beamforming, with calibration port
supported.
• Sub 3GHz from 700 MHz to 2.6 GHz 4T4R all-in-one.
• SDIF (Signal Direct Injection Feeding) technology inside.
London Pro Platform
Bangkok Pro Platform
TDD+FDD All in One Antenna
High-capacity Multi-beam Antenna
Width*Depth: 499*206 mm
• FDD 4T4R on Sub 3GHz bands and TDD 8T8R on
2.3~3.8 GHz.
• Dual TDD wide band 8T8R for sharing between
operators.
• Higher isolation benefits interference control between
TDD 2.6 GHz and FDD 2.6 GHz.
• SDIF (Signal Direct Injection Feeding) technology inside.
Width*Depth: 499*206mm
• 4T4R six-sector, enabling capacity increase by 1.7-2.0X,
compared with 2T2R.
• 4T3S & 4T6S all-in-one antenna，4T4R three-sector on
sub 3GHz bands and 4T4R six-sector on 1.8~2.6 GHz.
• Snake Array 2.0 & adaptive feeding network
technologies, enabling ultra-wideband 1.8 to 2.6 GHz
split sector high performance operation.
Product
Category
Blade AAU, Sub 6 GHz All-in-One, Simplified Deployment and Improved 5G Performance
Massive MIMO + Passive: BladeAAU Pro
Sub-6 GHz All in One
Height
BladeAAU Pro
Active:
C band 64T64R
Coverage improves xx%
xx m
Passive:
700~900 MHz 4T4R
L band 4T
1.8~2.6 GHz 4T4R or 8T8R
5G MM
xx dB
Height
Length*Width: 2099mm*470 mm
• Massive MIMO and passive antenna integration for simplified site deployment.
• The passive antenna supports 4T4R in low frequency bands, and 4T4R or 8T8R in intermediate frequency bands. The active
antenna supports 64T64R in C-band.
• 2m length supports massive MIMO and passive deployment on all Sub-6 GHz bands in one module.
SDA (Software-Defined Antenna) Enabling Smart 8T8R Deployment
FDD SDA
TDD SDA
Beam Adjustable for Smooth NR Evolution
High-capacity Multi-beam Antenna
4T6S
8T3S
2T12S
Length*Width:1509*499 mm
Length*Width: 2099*499 mm
• Supports 4T6S deployment to improve the capacity of
the current LTE network.
• Ready for 5G NR 8T8R evolution.
• Supports 4G/5G co-deployment.
• Bigger capacity gains than traditional 4T6S solutions, in
8T3S
• Supports TDD IMB (Intelligent Multi-Beam)
deployment, 1.8-2.2X capacity gain compared with
TDD 4T4R.
• Ready for 5G NR 8T8R evolution.
• Supports 4G/5G co-deployment.
cases of unevenly distributed UEs, using beam power
sharing technology.
Product
Category
Scenario-Specific Antennas: Small Size to Overcome Site Limitations
Golden Mini
Slim Antennas to Overcome Limited Space and
Wind Load Challenges
Width*Depth: 369*226 mm
• Slim dual low-band antenna, 2L4H configuration with
width of 369 mm.
• Smooth antenna upgrade from existing 1L to 2L,
without increasing dimensions.
London Mini
Small TDD+FDD Antennas to Overcome Space
Limitations
Width*Depth: 399*206 mm
• High configuration, up to 1L4H + 4SH@8T8R.
• Easy to install, 0.9 m length.
• Applicable to scenarios with limited space- and wind
load capacity, improving time to market.
• New wind load design reduces the overall load on the
tower.
Scenario-Specific Antennas: Meeting Network Coverage Needs in Various Scenarios
High Gain
Cluster Antenna
Better Outdoor-to-Indoor Coverage
Simplified Sites for Fitting into Environment
Simplified site
High gain
antenna
Existing
antenna
Cluster antenna
SFN
• Higher than 20 dBi gain in 1.8~2.6 GHz.
• Quickly improves indoor coverage without indoor
antenna admission issues.
• Rapid deployment: pole-mounted, 2G/3G/4G all-in-one.
• Landscaping and environment friendly.
• Cluster installation in 3 steps, requiring only 2 hours.
• Dual beams improve the coverage of high-rise buildings.
SFN (Single Frequency Network) technology eliminates
inter-beam interference in overlapping areas.
Product
Category
Continuous Innovation
According to the 2020 analysis report by ABI Research, Huawei continues to lead the antenna industry in
technology innovation and implementation. This has been achieved through continuously investing heavily in
R&D, with a strong customer focus, as operators’ long-term partner in the antenna field.
There are two main reasons Huawei has been so successful in the antenna market.
• Continuous innovation: Huawei is constantly improving antenna performance through advanced innovative
technologies. For example, SDIF technology significantly improves the efficiency of multi-band antennas,
Interleaved Design enables the highly-integrated deployment of TDD and FDD antennas, FreSIP (Frequency
Selective Isolating and Penetrating) implements integrated active antennas on the sub 6GHz band, and SDA
makes antennas more intelligent and digital.
• Quality above all: Huawei invests heavily in antenna R&D and production, with the target to bring
continuous innovation to the markets while always securing the highest quality - in every single antenna
delivered. Huawei have a large range of antenna test labs, implementing the strictest reliability test
processes, with manufacturing using advanced automatic production lines, thereby ensuring top antenna
quality.
Huawei Antenna Innovation and Implementation
Better Performance
Easier Deployment
New wind load design
FreSIP
SDIF
Cluster Connector
Golf ball effect
Radiation
Dual Belt Line
Enhanced
Streamline
Massive
MIMO
MQ4
MQ5
Robust Expertise
7
Antenna R&D centers worldwide
Advanced test equipment
SG178: Highest-precision in the industry
400+
Experts
900+
Antenna patents
Advanced production equipment
Automated production line
Product
Category
Contribution to Industry Development
Huawei is committed to promoting the healthy development of the antenna industry. To date, Huawei has
participated in over 50 standards organizations and is continuously contributing to industry coordination,
alignment, and standardization.
• With the support of operators, Huawei has held nine Global Antenna Technology & Industry Forums. 2020
marked the first time the forum was held online, gathering more than 3000 customers from over 100
countries and regions. The event has evolved in to one of the most influential platforms in the antenna
industry. It brings together industry-leading telecom operators, third-party organizations, tower companies,
industry organizations, and media, to jointly advance the industry's development.
• Huawei has also hosted five Antenna Technology Conferences, holding the latest one at its Songshan lake
base. The Conference brought together over 220 senior antenna experts and professors from around the
world. This conference has become one of the main communication platforms for development and
innovation in antenna technology.
• As a leader and major contributor to the Next Generation Mobile Network (NGMN) Alliance, Huawei has
promoted MQ4 and MQ5 cluster connectors to become industry standards. MQ4/MQ5 patents have been
licensed to seven mainstream connector vendors for free use. NGMN has selected Huawei MQ4 and MQ5
cluster connectors for early 5G NR deployment.
• Huawei is a major contributor to the P-BASTA 11.1 standard, and a leader and major contributor to BASTA
AA.
Product
Category
Antenna Type Naming Rule: Type1
Example: D -XXXXX -690-960/1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-B/R
Diagram: X1
X2
X3
Polarization
Antenna type
X4
X5
Half-power
beamwidth
Frequency range
X6
Downtilt type
Gain
Antenna
characteristic
A
ACSR
D
Directional
O
Omni-directional
C
Cluster
I
Indoor
Number + M
Multi Beam, 3M means three beams
CP
Camouflage Pipe
CS
Camouflage Square Column
X
X Polarization
V
Vertical Polarization
H
Horizontal Polarization
C
Circular Polarization
X3
Number
Frequency Bandwidth
X4
Number
Half-power Beam Width
X5
Number
Gain(dBi)
Number + Letter
0F: Fixed Downtilt
Letter
M: Electrical Downtilt
C
Combiner Integrated
B
Bias Tee Integrated
T
TMA Integrated
R
RCU Integrated
AS
Azimuth Steering
HE
High Efficiency
ESLS
Enhanced Side Lobe Suppression
X1
X2
X6
X7
X7
** For antennas with 14 or more ports, the same letters are represented in the “Number + Letter" format for the X2, X3, X4, and
X6 bits. For example, for the "X2" bit, "7X" indicates "XXXXXXX".
Product
Category
Antenna Type Naming Rule: Type2
Example: D - 06X - 2x690-960/4x1710-2690 - 2x65/4x65 - 2x15.5i/4x18i - 6xM - R
Diagram: X1
X2
X3
X4
Polarization
Antenna type
X5
Half-power
beamwidth
Frequency range
X6
X7
Downtilt type
Gain
Antenna
characteristic
A
ACSR
D
Directional
O
Omni-directional
C
Cluster
I
Indoor
Number + M
Multi Beam, 3M means three beams
CP
Camouflage Pipe
CS
Camouflage Square Column
X
X Polarization
V
Vertical Polarization
H
Horizontal Polarization
C
Circular Polarization
X3
Number
Frequency Bandwidth
X4
Number
Half-power Beam Width
X5
Number
Gain(dBi)
Number + Letter
0F: Fixed Downtilt
Letter
M: Electrical Downtilt
C
Combiner Integrated
B
Bias Tee Integrated
R
RCU Integrated
AS
Azimuth Steering
ESLS
Enhanced Side Lobe Suppression
EMF
EMF
TD
Topology detection
X1
X2
X6
X7
Product
Category
Product Model Naming Rule
Antenna Model Naming Example
Type1
A
OC
45
18
R
0
Notes for frequency characters:
v06
v06/v07: 4.3-10 connector
v01/v02 version (optional)
Different antenna in ascending order
Antenna types
R: RCU Integrated
Number: MET or FET
S: Cluster antenna
Gain (the maximum gain of all the bands)
Polarization
Frequency characters
OC: Octa-band
A: Antenna products
C: Camouflage antennas
45: Single-band antennas (450-470 MHz)
70: Single-band antennas (690-960 MHz)
79: Single-band antennas (790-960 MHz)
19: Single-band antennas (1710-2200 MHz or 1710-2170 MHz)
26: Single-band antennas (1710-2690 MHz)
DU: Dual-band antennas
TR: Tri-band antennas
QU: Quad-band antennas
PE: Penta-band antennas
SI: Six-band antennas
HP: Hepta-band antennas
OC: Octa-band antennas
TD: TDD antennas
MB: Multi-beam antennas
Type2
A
06
240
P
D
00
v06
N
Option: Reserved
v06: 4.3-10 connector
v01/v02 version (optional)
Different antenna in ascending order
Beam shaping attribute
D(Digital): Adjustable Beam
A(Analog): Consistent Beam
Physical aspect
P: Panel Antenna
C: Camouflage Antenna
Port couple numbers distribution
0: pairs of port (≥3GHz)
4: pairs of port (1-3GHz)
2: pairs of port (≤1GHz)
Frequency characters
06: 6 pairs of port
A: Antenna products
Product
Category
Product Model Naming Rule
RCU Model Naming Example:
A
RCU
020
04
v01
AIMM Model Naming Example:
A
IMM
21
S
11
EB
v01
v01/v02 version (optional)
v01/v02 version (optional)
Functional character (optional)
EB: Easy Beam
Different RCU in ascending order
00-- MET module
11-- AISG interface: 1 input 1 output
22-- AISG interface: 2 input 2 output
AISG version
011: AISG 1.1
020: AISG 2.0
AIMM types
S: for single-band antenna
D: for dual-band antenna
M: for multi-band antenna
RCU
AISG version: 20 (AISG 2.0)/21 (AISG 2.1)
IMM: Information management module
ALD products
TMA Model Naming Example:
A
TA
26
20
00
v06
ALD products
Combiner Model Naming Example:
A
v06: 4.3-10 connector
v01/v02 version (optional)
Different TMA in ascending order
AISG version
11: AISG 1.1
20: AISG 2.0
Frequency
26: 2600M TMA
DU: Dual-band TMA
TA: TMA
COM
D
2
H
11
v06
v06: 4.3-10 connector
v01/v02 version (optional)
Different combiner in ascending order
DC bypass properties
H: High-band DC bypass
L: Low-band DC bypass
A: All bands DC bypass
(4.3-10 connector only)
S: Auto-sense DC bypass
N: Filter or No DC bypass
2: Dual unit
Frequency character
D: Dual-band combiner
T: Triple-band combiner
Q: Quad-band combiner
COM: Combiner
ALD products
ALD products
Product
Category
Colour Coding and Symbols
Antenna Port Colour Coding
Colour coding is used to identify antenna RF ports and also for RET remote identification. Colour coding consists of
five parts generally: colour code, pattern coding, array numbering, array symbol and RCU serial number.
14-Port EasyRET antenna is used as an example to illustrate colour coding:
1. Colour Code
2. Pattern Coding
(Used to distinguish different
bands. For details, please see
chapter 1.)
(Used to differentiate array ports
carrying the same colour code.
For details, please see chapter 2.)
3. Array Numbering
(Used to mark different array ID and
array positions. For details, please see
chapter 3.)
4. Array Symbol
(Used to display the physical structure of the antennas. For details, please see chapter 4.)
Two types of array symbol are used (Type 1 and Type 2). Which type is used depends on specific antennas. This also
applies to chapter 3 Array numbering and chapter 7 RCU serial number.
Type 1
Type 2
2 Low Bands Filtered
r1: 690-862MHz
r2: 880-960MHz
r1 and r2 share the same low-band array
r2
y1
y2
b1
r1
y3
4 high-band arrays
b1: 1695-2200MHz
y1: 2490-2690MHz
y2: 1695-2690MHz
y3: 1427-2690MHz
b1 and y1 share the same high-band array
2 Low Bands Filtered
r: 690-862MHz
rr: 880-960MHz
r and rr share the same low-band array
rr
yL
yyyR
yyC
b
r
4 high-band arrays
b: 1695-2200MHz
yl: 2490-2690MHz
yyC: 1695-2690MHz
yyyR: 1427-2690MHz
b and yL share the same high-band array
5. Integrated RCU Serial Number
(Used to distinguish RCUs of different bands to support remote RCU identification. For details, please see chapter 5.)
Type 1:
HWxxx..........r1
HWxxx..........r2
HWxxx..........b1
HWxxx..........y1
Type 2:
HWxxx..........b2
HWxxx..........b3
HWxxx..........y2
HWxxx..........r
HWxxx..........rr
HWxxx..........b
HWxxx..........yL
HWxxx..........bbC
HWxxx..........bbbR
HWxxx..........yyR
Product
Category
Colour Coding and Symbols
1. Colour Code
According to AISG, the upper band edge ranges of the antenna port are represented by red, green, blue, and yellow
in sequence from the low band range to the high band range. The following table shows the definition of the
frequency range and the associated colour code abbreviation.
Upper Band Edge Range
Colour
Colour Code Abbreviation
380MHz to 1000MHz
Red
r
1001MHz to 1700MHz
Green
g
1701MHz to 2300MHz
Blue
b
2301MHz to 3000MHz
Yellow
y
3001MHz to 5000MHz
Purple
p
5001MHz to 6000MHz
Orange
o
2. Pattern Coding
Pattern coding is used to differentiate array ports carrying the same colour code.
Two types of pattern coding are used (Type A and Type B). Which type is used depends on specific antennas.
Type A:
The number of dots is shown in the following figure.
Note: The dot may be black or white.
y1
y2
y3
y4
y6
y5
Type B:
Different segments of color and gaps are shown in the following figure.
Note: Gaps between colored segments may be white gaps or black lines.
y1 (or y)
y2 (or yy)
y3 (or yyy)
y4 (or yyyy)
y5 (or yyyyy)
Multi-beam Coding:
Note: the yellow color will related to corresponding port ,
Dual-beam
Tri-beam
4-beam
3. Array Numbering
For multi-band antennas, different arrays are indicated by their colour code abbreviations, array IDs, as well as array
positions. There are two types of array numbering.
Array ID: e.g. “y1” or “y” for the first high-band array, ”y2” or ”yy” for the second high-band array.
Product
Category
Colour Coding and Symbols
Array position is represented by abbreviation (e.g. L, C, R, T, M, and B), the following table shows the details.
Array Horizontal Definition
Array Vertical Definition
Abbreviation
Full Name
Abbreviation
Full Name
L
Left Array
T
Top Array
C
Center Array
M
Middle Array
R
Right Array
B
Bottom Array
Take 14-port antenna for example, array with Ry2 or yyR means the second high-band array and located at right
position inside of antenna.
4. Array Symbol
In order to better display the physical structure of Huawei antennas, the array symbol corresponding to the array ID
and array position is shown in the catalogue.
The following figures show the physical structures of different antennas as examples:
Type 1
I. 4-Port Antenna
2 Filtered Low Bands ("Dipole reuse")
e.g. 790-862/880-960 or
690-803/824-960 MHz
r1
or
r
r2
Type 1
III.4-Port Antenna
2 Side-by-side High-band Arrays
e.g. 1710-2690/1710-2690 MHz
y1
Type 2
or
y2
rr
Type 1
II. 4-Port Antenna
2 Filtered High Bands ("Dipole reuse")
e.g. 1710-2170/2490-2690 MHz
Type 2
yL
yyR
y1
Type 2
y1 b1
Type 1
IV.6-Port Antenna
1 Low Band
2 Side-by-side High-band Arrays
e.g. 790-960/1710-2690/17102690 or 690-960/17102690/1710-2690 MHz
or
y
or
y2
b
Type 2
yL
yyR
r1
Type 1
V. 8-Port Antenna
1 Low Band
3 Side-by-side High-band
Arrays
e.g. 690-960/1710-2690/
1710-2690/1710-2690 MHz
y1
y2
r1
or
y3
Type 1
Type 2
yL
yyC
r
yyyR
VI.10-Port Antenna
1 Low Band and
4 High-bands
e.g. 690-960/1695-2690/
1695-2690/1695-2690/
1695-2690 MHz
r
or
Type 2
y2
y4
yLT
yyyRT
y1
y3
yyLB
yyyyRB
r1
r
Product
Category
Colour Coding and Symbols
5. RCU Serial Number
The SN (serial number) of integrated RCU contains colour coding information, EasyRET antennas support remote
RCU identification by colour coding.
The SN of an integrated RCU contains 19 digits. The following describes a hexa-band EasyRET antenna's SN as an
example:
Note: This naming convention is the mainstream scene. If you have any questions, please contact us.
Type 1: H W N 2
4
3 0 G 9
0
0
1
0
0
2
1
R
y
2
Type 2: H W M 2
4
3 0 G 9
0
0
1
0
0
2
1
y
y
R
Color coding:
Use the last or last several
digits to show the band
features and position of the
antenna port. Fill other digits
that are not used with a
random code.
Running number (random)
Delivery month (9: September)
Delivery year (G: the year of
2016)
ITEM code of the antenna
RET Type, M/N: integrated RCU
Manufacturer code, fixed as HW
Product
Category
Product Replacement List
Product in the catalogue 2020
Product in the catalogue 2021
ANT
ADU451602v06
ADU4518R7v06
ATR451602v06
ATR4518R6v06
AQU4518R23v06
AQU4518R23v18
AQU4518R24v06
AQU4518R24v18
AQU4518R25v06
AQU4518R25v18
ASI4517R3v06
ASI4517R3v18
ASI4518R4v06
ASI4518R33v06
ASI4518R10v06
ASI4518R10v18
ASI4518R14v06
ASI4518R14v18
ASI4518R31v06
ASI4518R37v07
ASI4518R36v06
ASI4518R10v09
ASI4518R37v06
ASI4518R37v07
ASI4518R39v06
ASI4518R39v07
AHP4518R4v06
AHP4518R4v07
AOC4518R4v06
AOC4518R4v07
AOC4518R7v06
AOC4518R07v07
A144521R0v06
A144521R1v06
Product
Category
2 ports
4 ports
6 ports
8 ports
4 ports - 1L1H
10 ports - 1L4H
B - 3 1LnH
6 ports - 1L2H
12 ports - 1L5H
B - 4 2LnH
6 ports - 2L1H
8 ports - 2L2H
10 ports - 2L3H
12 ports - 2L4H
14 ports - 2L5H
16 ports - 2L6H
20 ports - 2L8H
10 ports - 3L2H
18 ports - 3L6H
30 ports - 3L12H
4 ports
8 ports - 1L3H
Multi-band
16 ports - 3L5H
Multi-beam
B - 5 3LnH
TDD Antenna
C
Digital Antenna
System
SDA
C - 1 RET System
C - 2 Intelligent Management
D - 1 TMA
D
Antenna Line
Product
D - 2 Combiner
E
Bracket &
Installation Guide
E - 1 Bracket
E - 2 Installation Guide
Special Scene Antenna
Digital
FDD + NR\TDD
NR\TDD &
Others
FDD +
NR\TDD
Multi-beam
TMA
Passive Antenna
Combiner
B
L Band &
H Band
B - 2 High Band
2 ports
1LnH Band
1 ports
2LnH Band
B - 1 Low Band
3LnH Band
AAU & ACS
Bracket &
Installation Guide
A
Active
Antenna
AAU &
ACS
L: Low Band, ≤960MHz; H: High Band, > 960MHz
1LnH: means 1 Low Band and n High Bands, n: 1, 2, 3
A. AAU and Antenna with Cabinet Suite
Model
Page
2
BladeAAU Pro
BladeAAU Pro
*AAU5833
3
BladeAAU
AAU5831
4
ACSR
*ACSR 2.0
6
* Preliminary Issue
1
Product
Category
BladeAAU Pro
Product Description
BladeAAU Pro is a revolutionary integrated antenna design form of active antenna and passive
antenna. With the help of innovative Frequency Selective Isolating and Penetrating (FreSIP) and
Signal Direct Injection Feeding (SDIF), the active module can support 64T64R Massive MIMO and
the antenna specifications of passive module also enhances a lot. This kind of innovative design
can help operators quickly deploy 5G Massive MIMO in the best position. Also the enhanced
capabilities of active and passive modules can brings more network benefits to the operators.
BladeAAU Pro
Blade Antenna Features
Active Module

Support C-band 64T64R Massive MIMO

FreSIP inside
Passive Module

Support 2 low bands and 6 high bands

Support FDD 8T8R

FreSIP inside

SDIF insde
2
Product
List
Product
Category
AAU5833
Preliminary Issue
Electrical Properties
Frequency range (MHz)
2 x (690 - 960)
2 x (1427 - 2690)
2 x (1695 - 2200)
2 x (2490 - 2690)
2 - 12
2 - 12
2 - 12
Electrical downtilt (°)
2 - 12
Gain (dBi)
15.2
18
17.2
17.8
Side lobe suppression for first
side lobe above main beam
(Typ.) (dB)
15
16
16
16
Horizontal 3dB beam width (°)
68
67
65
65
Vertical 3dB beam width (°)
9.6
7.2
6.4
5.3
VSWR
< 1.5
Front to back ratio, copolar
(dB)
Typ. 25
Typ. 25
Typ. 25
Typ. 25
Cross polar ratio (dB) 0°
Typ. 15
Typ. 16
Typ. 16
Typ. 16
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2099 x 470 x320
Antenna net weight (kg)
72
Mechanical downtilt (°)
0-8
Connector
5x 4.3-10 Female
3 x MQ4
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
3
Product
List
Product
Category
AAU5831
Product Description

AAU5831 is an antenna with active and passive fully
integrated design. The upper active module has the low
band dipole arrays integrated together with C-band
Massive MIMO dipole arrays. The lower passive module
support 2 low bands and 4 high bands.

With the highly integrated design, AAU5831 also helps
operators to simplify sites and deploy 5G rapidly.
AAU5831
Frequency (Hz)
Active: 3420M-3600M or 3600-3800M
Passive:2*690-960M+2*1427-2690M+2*1695M-2690M
TX/RX
Active: 32T32R
Passive: 2T2R/4T4R/8T8R
EIRP (Active)
77.3
Technology
GSM\UMTS\LTE\NR
Dimensions (H x W x D)
2099mm(H)*470mm(W)*300mm(D)
Weight (kg)
Upper Module: 32.5
Lower Module: 32
Temperature
- 40℃~55℃
Heat Dissipation
Natural Cooling
Wind load
Frontal/Lateral/Maximum: 600N/820N/1200N at 150km/h
Passive Connectors
13 x 4.3-10 Female
4
Product
List
Product
Category
AAU5831
Antenna Specifications
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
First upper sidelobe suppression (Typ.) (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
Front to back ratio , ±30° (dB)
14.4
14.7
14.9
15.2
14.3 ±0.4
14.6 ±0.4
14.7 ±0.5
15.1 ±0.5
-15
-15
-15
-15
70 ±6
67 ±5
67 ±4
65 ±5
10.2 ±0.9
9.4 ±0.6
9.1 ±0.5
8.5 ±0.7
22
22
22
22
Maximum input power per port (W)
≤ 120
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
Frequency range (MHz)
1710 - 1990
Polarization
2 x (1710 - 2690)
1920 - 2200
+45° , -45°
2490 - 2690
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Coupling degree from the calibration port to each
radiation port (dB)
at mid Tilt
Gain (dBi)
over all Tilts
First upper sidelobe suppression (Typ.) (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
Front to back ratio , ±30° (dB)
-30 ±2
16.4
17.1
17.6
16.3 ±0.7
17.0 ±0.8
17.5 ±0.5
-15
-15
-15
69 ±5
64 ±8
57 ±5
7.8 ±0.8
7 ±0.6
5.4 ±0.4
25
25
25
Maximum input power per port (W)
≤ 80
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
Frequency range (MHz)
1427 - 1517
Polarization
2 x (1427 - 2690)
1710 - 1990
1920 - 2200
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Coupling degree from the calibration port to each
radiation port (dB)
Gain (dBi)
2490 - 2690
at mid Tilt
over all Tilts
First upper sidelobe suppression (Typ.) (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
Front to back ratio , ±30° (dB)
-30 ±2
15.3
16.8
17.2
17.7
15.2 ±0.6
16.7 ±0.5
17.0 ±0.5
17.5 ±0.6
-15
-15
-15
-15
75 ±7
70 ±5
67 ±7
60 ±6
9.4 ±0.4
7.9 ±0.7
7 ±0.7
5.4 ±0.4
25
25
25
25
Maximum input power per port (W)
≤ 80
Impedance (Ω)
50
Grounding
DC Ground
5
Product
List
Product
Category
ACSR (Antenna with Cabinet Suite for RRU) 2.0
Product Description
ACSR(Antenna with Cabinet Suite for RRU) is an extensible antenna solution, which can be
integrated with Huawei RRU to realize passive antenna and RRU in one box. ACSR helps operators
to deploy sub 3GHz full 4T4R by one installation in one box to simply the site configuration and
reduce TCO. With SDIF enhancement, the new ACSR 2.0 can provide extra antenna electrical
specification benefits. Also, the new structure design brings better antenna appearance and lighter
antenna weight.
ACSR 2.0 Features
Passive Antenna

Based on Huawei advanced multi-band antennas platforms, providing future evolution
capability and best performance.

SDIF inside.

Light product weight.

Slim size with better product appearance.
RRU Slot

Support Huawei multi-band RRU to reduce boxes.

Compatible with Huawei 24L/18L/12L RRU.

Maximum 2 RRUs can be integrated with ACSR.
6
Product
List
Product
Category
ACSR (Antenna with Cabinet Suite for RRU) 2.0
Preliminary Issue
Electrical Properties
Frequency range (MHz)
Electrical downtilt (°)
Gain (dBi)
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
2 x (690 - 960)
2 x (1427 - 2690)
bottom
2 x (1695 - 2690)
Top
2 - 12
2 - 12
2 - 12
15.3
17.0
17.0
16
16
16
Horizontal 3dB beam width (°)
66
65
63
Vertical 3dB beam width (°)
9.8
9.2
8.5
VSWR
< 1.5
Front to back ratio, copolar (dB)
Typ. 25
Cross polar ratio (dB)
Typ. 17
0°
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Mechanical Properties
Antenna dimensions (H x W x D)
(mm)
2009 x 369 x 300
Antenna net weight (kg)
45
Mechanical downtilt (°)
0-8
Connector
12 x 4.3-10 Female
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Antenna with Cabinet Suite Properties
ACS Properties
RRU supported for
ACSR (Both position)
24L /18L /12L RRU
Notes: Only HUAWEI RRU supported. Contact technical support to get specific RRU type.
7
Product
List
Product
Category
B. Passive Antenna
Multi-band
B - 1 Low Band
1 Ports
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method Connector
Range (MHz) Beam Width(o)
Downtilt(o)
694-960
360
11
0
FET
1 x 4.3-10
Dimension(mm)
Model
Page
3360 x φ58
*A70VP1100v06
9
Dimension(mm)
Model
Page
2 Ports
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method Connector
Range (MHz) Beam Width(o)
Downtilt(o)
690-960
65
15
0-14
EasyRET2.0
2 x 4.3-10
1415 x 298 x 149
A704515R0v06
11
690-960
65
16.5
0-12
EasyRET2.0
2 x 4.3-10
1936 x 298 x 149
A704516R0v06
13
690-960
65
17.5
0-10
EasyRET2.0
2 x 4.3-10
2535 x 298 x 149
A704517R0v06
15
790-960
90
15
0-12
EasyRET2.0
2 x 4.3-10
1936 x 259 x 135
A794515R1v06
17
690-960
90
16.5
0-10
EasyRET2.0
2 x 4.3-10
2695 x 259 x 135
A704516R01v06
19
690-960
33
20.5
0-10
EasyRET2.0
2 x 4.3-10
2580 x 590 x 169
A704521R0v06
21
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method Connector
Range (MHz)Beam Width (o)
Downtilt (o)
Dimension(mm)
Model
Page
4 Ports
690-960/
690-960
65/65
14.5/14.5
0-14/0-14
EasyRET2.0
4 x 4.3-10
1499 x 429 x 196
ADU4515R5v06
23
690-960/
690-960
65/65
16/16
0-10/0-10
EasyRET2.0
4 x 4.3-10
1999 x 429 x 196
ADU4516R6v06
25
690-960/
690-960
65/65
17/17
0-10/0-10
EasyRET2.0
4 x 4.3-10
2550 x 429 x 196
ADU4517R6v06
27
690-960/
690-960
90/90
15/15
2-12/2-12
EasyRET2.0
4 x 4.3-10
2550 x 369 x 226
*ADU4515R17v06
29
* Preliminary Issue
8
Product
Category
A70VP1100v06
OV-694-960-11i-0F
Preliminary Issue
Electrical Properties
694 - 960 (r1)
Frequency range (MHz)
694 - 803
790 - 862
Polarization
Vertical
Beam tilt (°)
0
Gain (dBi)
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
824 - 894
880 - 960
10.4 ±0.5
10.5 ±0.6
10.6 ±0.5
11.0 ±0.7
> 16
> 17
> 17
> 17
360
360
360
360
7.3 ±0.6
6.8 ±0.7
6.6 ±0.8
6.5 ±0.8
VSWR
< 1.5
Max. effective power per port (W)
200 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
3475 x 220 x 220
Antenna weight (kg)
6.9
Clamps weight (kg)
5.1
Antenna packing weight (kg)
Mast diameter supported (mm)
15.7 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (°C)
-40 .. +65
Wind load (N)
225 (at 150 km/h)
Max. operational wind speed (km/h)
Connector
Connector position
3360
Packing dimensions (H x W x D) (mm)
3360 x φ58
200
φ58
1 x 4.3-10 Female
Bottom
φ65
Certification: CE, RoHS
9
Product
List
301
Antenna dimensions (H x Diameter)
(mm)
Product
Category
A70VP1100v06
OV-694-960-11i-0F
r1
Pattern sample for reference
694 - 960 MHz
(r1)
10
Product
List
Product
Category
A704515R0v06
DX-690-960-65-15i-M-R
EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 1.4m
Antenna Specifications
Electrical Properties
690 - 960 (r)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
13.9
14.4
14.6
14.8
13.9 ±0.3
14.3 ±0.3
14.5 ±0.3
14.7 ±0.4
> 15
> 15
> 15
> 17
69 ±1.4
68 ±1.0
67 ±1.0
65 ±2.0
16.4 ±1.0
15.0 ±1.0
14.5 ±0.7
13.2 ±0.9
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ±30° (dB)
> 24
> 25
> 25
> 25
Cross polar ratio (dB)
> 17
> 17
> 17
> 17
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
1415 x 298 x 150
Packing dimensions (H x W x D) (mm)
1835 x 360 x 225
Antenna weight (kg)
12.3
Clamps weight (kg)
3.3 (2 units)
Antenna packing weight (kg)
68
(87)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
21.7 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1280
1415
Mast diameter supported (mm)
-40 .. +65
Frontal:
435 (at 150 km/h)
Lateral:
195 (at 150 km/h)
Maximum: 580 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
2 x 4.3-10 Female
Connector position
48
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt:
0 - 16 °
1.3 kg
1 (Separate packing)
11
Product
List
Product
Category
A704515R0v06
DX-690-960-65-15i-M-R
EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
a
Integrated RET S/N:
a HWxxxx…...r
r - Red
r
Pattern sample for reference
690 - 960 MHz
(r)
12
Product
List
Product
Category
A704516R0v06
DX-690-960-65-16.5i-M-R
EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.0m
Antenna Specifications
Electrical Properties
690 – 960 (r)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.5
15.9
16.1
16.4
15.4 ±0.3
15.7 ±0.4
15.9 ±0.5
16.1 ±0.5
> 15
> 15
> 15
> 15
69 ±1.0
68 ±1.2
67 ±1.2
65 ±1.8
11.3 ±0.8
10.3 ±0.5
9.8 ±0.6
9.2 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ±30° (dB)
> 24
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1936 x 298 x 149
Packing dimensions (H x W x D) (mm)
2365 x 360 x 230
Antenna weight (kg)
68
15.3
3.3 (2 units)
Antenna packing weight (kg)
(588)
Clamps weight (kg)
26.1 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
1300
1936
Operational temperature (℃)
Frontal:
620 (at 150 km/h)
Lateral:
280 (at 150 km/h)
Maximum: 830 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 4.3-10 Female
Connector position
Bottom
48
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt
kit
ASMDT0C01
Mechanical downtilt:
0 - 12 °
2.1 kg
1 (Separate packing)
13
Product
List
Product
Category
A704516R0v06
DX-690-960-65-16.5i-M-R
EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
a
Integrated RET S/N:
a HWxxxx…...r
r
r - Red
Pattern sample for reference
690 - 960 MHz
(r)
14
Product
List
Product
Category
A704517R0v06
DX-690-960-65-17.5i-M-R
EasyRET Low-Band 2- Port Antenna with 1 Integrated RCU - 2.6m
Antenna Specifications
Electrical Properties
690 – 960 (r)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
at mid Tilt
16.5
16.7
17.0
17.2
16.4 ±0.3
16.6 ±0.4
16.7 ±0.4
16.9 ±0.5
> 17
> 18
> 18
> 17
Horizontal 3dB beam width (°)
69 ±1.0
68 ±1.2
67 ±1.2
65 ±2.0
Vertical 3dB beam width (°)
8.7 ±0.6
8.0 ±0.5
7.7 ±0.4
7.2 ±0.5
Gain (dBi)
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ±30° (dB)
> 25
> 26
> 26
> 26
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2535 x 298 x 149
Packing dimensions (H x W x D) (mm)
2910 x 375 x 200
Antenna weight (kg)
68
19.3
3.3 (2 units)
Antenna packing weight (kg)
(613)
Clamps weight (kg)
27.3 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1874
2535
Frontal:
845 (at 150 km/h)
Lateral:
380 (at 150 km/h)
Maximum: 1130 (at 150 km/h)
2 x 4.3-10 Female
Connector position
Bottom
Accessories
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt:
0-8°
2.1 kg
1 (Separate packing)
15
48
Item
Product
List
Product
Category
A704517R0v06
DX-690-960-65-17.5i-M-R
EasyRET Low-Band 2- Port Antenna with 1 Integrated RCU - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
a
Integrated RET S/N:
a HWxxxx…...r
r - Red
r
Pattern sample for reference
690 - 960 MHz
(r)
16
Product
List
Product
Category
A794515R1v06
DX-790-960-90-15i-M-R
EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.0m
Antenna Specifications
Electrical Properties
790 – 960 (r)
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
at mid Tilt
Gain (dBi)
over all
Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.0
15.2
15.3
14.8 ±0.3
15.0 ±0.3
15.0 ±0.4
> 18
> 18
> 18
86 ±1.0
85 ±1.0
85 ±1.5
10.0 ±0.4
9.8 ±0.4
9.3 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio , ±30°(dB)
> 24
> 24
> 24
Cross polar ratio (dB)
> 20
> 20
> 20
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1936 x 259 x 135
Packing dimensions (H x W x D) (mm)
2255 x 305 x 190
13.5
Clamps weight (kg)
(604)
Antenna weight (kg)
68
3.3 (2 units)
Antenna packing weight (kg)
22.7 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
1285
1936
Frontal:
545 (at 150 km/h)
Lateral:
250 (at 150 km/h)
Maximum: 730 (at 150 km/h)
Wind load (N)
200
Survival wind speed (km/h)
250
Connector
2 x 4.3-10 Female
Connector position
Bottom
47
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt
kit
ASMDT0C01
Mechanical downtilt:
0 - 12 °
2.1 kg
1 (Separate packing)
17
Product
List
Product
Category
A794515R1v06
DX-790-960-90-15i-M-R
EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
a
Integrated RET S/N:
a HWxxxx…...r
r - Red
r
Pattern sample for reference
790 - 960 MHz
(r)
18
Product
List
Product
Category
A704516R01v06
DX-690-960-90-16.5i-M-R
EasyRET 2-Port Antenna with 1 Integrated RCU - 2.6m
m
Antenna
Specifications
Electrical Properties
690 – 960 (r)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
at mid Tilt
15.5
15.8
16.1
16.3
15.3 ±0.5
15.7 ±0.6
16.0 ±0.6
16.1 ±0.6
Side lobe suppression for first
side lobe above main beam (dB)
> 15
> 16
> 16
> 16
Horizontal 3dB beam width (°)
90 ±3
89 ±3
88 ±3
87 ±3
8.6 ±0.7
7.9 ±0.5
7.5 ±0.3
7.1 ±0.4
Gain (dBi)
over all Tilts
Vertical 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Front to back ratio , ±30° (dB)
> 22
> 23
> 23
> 24
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
0°
Max. effective power per port
(W)
400 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2695 x 259 x 135
Packing dimensions (H x W x D) (mm)
3035 x 345 x 195
18.3
Clamps weight (kg)
756.5
Antenna weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
28.7 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2695
Mast diameter supported (mm)
Frontal:
795 (at 150 km/h)
Lateral:
360 (at 150 km/h)
Maximum: 1070 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
250
Connector
1885
Survival wind speed (km/h)
2 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0 - 12 °
2.1 kg
1 (Separate packing)
19
53.5
Accessories
Product
List
Product
Category
A704516R01v06
DX-690-960-90-16.5i-M-R
EasyRET 2-Port Antenna with 1 Integrated RCU - 2.6m
m
Antenna
Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Power consumption (W)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
a
Integrated RET S/N:
a HWxxxx…...r
r - Red
r
Pattern sample for reference
690 - 960 MHz
(r)
20
Product
List
Product
Category
A704521R0v06
DX-690-960-33-20.5i-M-R
EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.6m
Antenna Specifications
Electrical Properties
690 - 960 (r)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
at mid Tilt
19.1
19.7
20.0
20.3
19.0 ±0.5
19.6 ±0.4
19.9 ±0.5
20.2 ±0.3
Side lobe suppression for first
side lobe above main beam (dB)
> 19
> 21
> 21
> 19
Azimuth side lobe
suppression(dB)
> 18
> 18
> 19
> 19
Horizontal 3dB beam width (°)
35 ±1.5
32.5 ±1.0
31.5 ±1.5
29 ±1.0
Vertical 3dB beam width (°)
8.8 ±0.5
8.0 ±0.5
7.7 ±0.3
7.2 ±0.5
Gain (dBi)
over all Tilts
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Front to back ratio , ±30°(dB)
> 32
> 35
> 33
> 32
Cross polar ratio (dB)
> 21
> 28
> 26
> 24
0°
≥ 30
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D)
(mm)
2580 x 590 x 169
Packing dimensions (H x W x D) (mm)
2875 x 740 x 300
44.8
Clamps weight (kg)
(599)
Antenna weight (kg)
106
6.3 (2 units)
Antenna packing weight (kg)
64.7 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1888
2580
Mast diameter supported (mm)
Frontal:
1665 (at 150 km/h)
Lateral:
240 (at 150 km/h)
Maximum: 1665 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2 x 4.3-10 Female
Bottom
93
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt
kit
ASMDT0H01
Mechanical downtilt:
0-8°
3.1 kg
1 (Separate packing)
21
Product
List
Product
Category
A704521R0v06
DX-690-960-33-20.5i-M-R
EasyRET Low-Band 2-Port Antenna with 1 Integrated RCU - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
a
Integrated RET S/N:
a HWxxxx…….r
r - Red
r
Pattern sample for reference
690 - 960 MHz
(r)
22
Product
List
Product
Category
ADU4515R5v06
DXX-690-960/690-960-65/65-14.5i/14.5i-M/M-R
EasyRET 2L 4-Port Antenna with 2 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable , each band separately
at mid Tilt
13.8
14.2
14.4
14.5
13.7 ±0.5
14.1 ±0.5
14.3 ±0.5
14.4 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 15
> 17
> 17
> 16
Horizontal 3dB beam width (°)
66 ±5
63 ±5
62 ±5
60 ±5
15.3 ±1.2
14.0 ±1.1
13.3 ±1.0
12.2 ±0.8
Gain (dBi)
over all Tilts
Vertical 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 24
> 24
> 25
Cross polar ratio (dB)
> 16
> 18
> 19
> 20
0°
Max. effective power per port
(W)
400 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1499 x 429 x 196
Packing dimensions (H x W x D) (mm)
1695 x 530 x 270
Antenna weight (kg)
22.4
Clamps weight (kg)
4.2 (2 units)
34.4 (Included clamps)
Mast diameter supported (mm)
(66)
Antenna packing weight (kg)
68
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
1376
1499
Operational temperature (℃)
Frontal:
410 (at 150 km/h)
Lateral:
245 (at 150 km/h)
Maximum: 540 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 4.3-10 Female
Bottom
57
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0 - 16 °
2.1 kg
1 (Separate packing)
23
Product
List
Product
Category
ADU4515R5v06
DXX-690-960/690-960-65/65-14.5i/14.5i-M/M-R
EasyRET 2L 4-Port Antenna with 2 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
a HWxxxx……Lr1
b HWxxxx……Rr2
a
b
r - Red
L - Left array
R - Right array
r1
r2
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
24
Product
List
Product
Category
ADU4516R6v06
DXX-690-960/690-960-65/65-16i/16i-M/M-R
EasyRET 2L 4-Port Antenna with 2 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.0
15.5
15.8
16.0
14.8 ±0.5
15.3 ±0.5
15.6 ±0.5
15.8 ±0.5
> 16
> 17
> 17
> 17
68 ±5
65 ±5
62 ±5
60 ±5
10.5 ±0.9
9.5 ±0.8
9.2 ±0.7
8.5 ±0.7
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 23
> 24
> 25
> 26
Cross polar ratio (dB)
> 17
> 18
> 19
> 20
0°
Max. effective power per port
(W)
400 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1999 x 429 x 196
Packing dimensions (H x W x D) (mm)
2270 x 515 x 235
Antenna weight (kg)
68
27.0
4.2 (2 units)
Antenna packing weight (kg)
(669)
Clamps weight (kg)
39.1 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
1273
1999
Operational temperature (℃)
Frontal:
555 (at 150 km/h)
Lateral:
340 (at 150 km/h)
Maximum: 735 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 4.3-10 Female
Connector position
Bottom
57
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0 - 12 °
2.1 kg
1 (Separate packing)
25
Product
List
Product
Category
ADU4516R6v06
DXX-690-960/690-960-65/65-16i/16i-M/M-R
EasyRET 2L 4-Port Antenna with 2 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.6 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
a HWxxxx……Lr1
b HWxxxx……Rr2
b
a
r - Red
L - Left array
R - Right array
r1
r2
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
26
Product
List
Product
Category
ADU4517R6v06
DXX-690-960/690-960-65/65-17i/17i-M/M-R
EasyRET 2L 4-Port Antenna with 2 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately
at mid Tilt
15.8
16.4
16.7
17.2
15.5 ±0.5
16.2 ±0.5
16.4 ±0.5
16.9 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 16
> 17
> 17
> 17
Horizontal 3dB beam width (°)
68 ±5
65 ±5
62 ±5
60 ±5
8.8 ±0.7
8.0 ±0.6
7.8 ±0.5
7.5 ±0.5
Gain (dBi)
over all Tilts
Vertical 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 23
> 24
> 25
> 26
Cross polar ratio (dB)
> 17
> 18
> 19
> 20
0°
Max. effective power per port
(W)
400 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
2550 x 429 x 196
Packing dimensions (H x W x D) (mm)
2810 x 515 x 240
Antenna weight (kg)
32.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
68
(706)
Antenna dimensions (H x W x D) (mm)
46.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
1787
-40 .. +65
Frontal:
735 (at 150 km/h)
Lateral:
450 (at 150 km/h)
Maximum: 965 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
2550
Operational temperature (℃)
200
Survival wind speed (km/h)
250
Connector
4 x 4.3-10 Female
Connector position
Bottom
57
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8 °
3.1 kg
1 (Separate packing)
27
Product
List
Product
Category
ADU4517R6v06
DXX-690-960/690-960-65/65-17i/17i-M/M-R
EasyRET 2L 4-Port Antenna with 2 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.6 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
a HWxxxx……Lr1
b HWxxxx……Rr2
b
a
r - Red
L - Left array
R - Right array
r1
r2
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
28
Product
List
Product
Category
ADU4515R17v06
DXX-690-960/690-960-90/90-15i/15i-M/M-R
EasyRET 2L 4-Port Antenna with Integrated RCUs - 2.6m
Preliminary Issue
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
Electrical downtilt (°)
2 - 12 , continuously adjustable, each band separately
at mid Tilt
14.4
14.7
15.0
15.5
14.3 ±0.5
14.6 ±0.5
14.9 ±0.5
15.4 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 16
> 16
> 17
> 17
Horizontal 3dB beam width (°)
93 ±8
89±7
88 ±6
84 ±6
8.9 ±0.7
8.0 ±0.5
7.7 ±0.4
7.3 ±0.4
Gain (dBi)
over all Tilts
Vertical 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation (dB)
≥ 25
Front to back ratio, ±30° (dB)
> 20
> 21
> 21
> 22
Cross polar ratio at boresight
(dB)
> 18
> 18
> 18
> 18
Max. effective power per port
(W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2550 x 369 x 226
Packing dimensions (H x W x D) (mm)
2945 x 455 x 275
68
Antenna weight (kg)
29.2
Clamps weight (kg)
4.2 (2 units)
44.2 (Included clamps)
(587)
Antenna packing weight (kg)
Mast diameter supported (mm)
50 - 115
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
1900
Frontal:
530 (at 150 km/h)
Lateral:
630 (at 150 km/h)
Maximum: 965 (at 150 km/h)
Wind load (N)
2550
Radome material
200
Survival wind speed (km/h)
250
Connector
4 x 4.3-10 Female
Connector position
Bottom
6
3
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8°
2.1 kg
1 (Separate packing)
29
Product
List
Product
Category
ADU4515R17v06
DXX-690-960/690-960-90/90-15i/15i-M/M-R
EasyRET 2L 4-Port Antenna with Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.6 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Lr1
HWxxxx……Rr2
y - Yellow
L - Left array
R - Right array
r1
r2
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
30
Product
List
Product
Category
B. Passive Antenna
Multi-band
B - 2 High Band
2 Ports
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method Connector
Range (MHz)Beam Width (o)
Downtilt (o)
Dimension(mm)
Model
Page
1710-2690
65
18
0-12
EasyRET2.0
2 x 4.3-10
1365 x 155 x 89
A264518R0v06
32
1695-2690
65
21
0-6
EasyRET2.0
2 x 4.3-10
2099 x 155 x 89
A264521R1v06
34
1695-2690
33
21
2-12
EasyRET2.0
2 x 4.3-10
1365 x 299 x 109
A264521R2v06
36
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method Connector
Range (MHz)Beam Width (o)
Downtilt (o)
Dimension(mm)
Model
Page
4 Ports
1710-2690/
1710-2690
65/65
18/18
0-12/0-12
EasyRET2.0
4 x 4.3-10
1365 x 269 x 86
ADU4518R6v06
38
1695-2690/
1695-2690
65/65
21/21
0-6/0-6
EasyRET2.0
4 x 4.3-10
2099 x 269 x 86
ADU4521R0v06
40
1710-2690/
1710-2690
33/33
21/21
0-10/0-10
EasyRET2.0
4 x 4.3-10
1399 x 449 x 196
ADU4521R3v06
42
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method Connector
Range (MHz)Beam Width (o)
Downtilt (o)
Dimension(mm)
Model
Page
6 x 4.3-10
1365 x 376 x 99
ATR4518R14v06
44
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method Connector
Range (MHz)Beam Width (o)
Downtilt (o)
Dimension(mm)
Model
Page
1499 x 449 x 115
AQU4518R21v06
46
6 Ports
1710-2690/
1710-2690/
1710-2690
65/65/65
18/18/18
0-12/0-12/
EasyRET2.0
0-12
8 Ports
1710-2690/
1710-2690/
1710-2690/
1710-2690
65/65/65/65
18/18/
18/18
0-12/0-12/
EasyRET2.0
0-12/0-12
8 x 4.3-10
31
Product
Category
A264518R0v06
DX-1710-2690-65-18i-M-R
EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 1.4m
Antenna Specifications
Electrical Properties
1710 – 2690 (y)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
at mid Tilt
17.4
18.0
18.5
18.6
17.2 ±0.3
17.6 ±0.5
18.3 ±0.4
18.4 ±0.4
> 18
> 18
> 18
> 18
Horizontal 3dB beam width (°)
68 ±2.0
65 ±2.4
62 ±2.7
60 ±1.5
Vertical 3dB beam width (°)
6.8 ±0.4
6.1 ±0.4
5.5 ±0.4
5.0 ±0.3
Gain (dBi)
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Front to back ratio, ±30° (dB)
> 28
> 29
> 29
> 29
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1365 x 155 x 89
Packing dimensions (H x W x D) (mm)
1695 x 195 x 155
Antenna weight (kg)
7.0
Clamps weight (kg)
2.1 (2 units)
Antenna packing weight (kg)
64
11.6 (included clamps)
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
Lateral:
Maximum:
Wind load (N)
220 (at 150 km/h)
110 (at 150 km/h)
290 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1392
38 - 115
Radome material
1365
Mast diameter supported (mm)
2 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Downtilt kit ASMDT0A01
Description
Weight
Units per antenna
Mechanical downtilt: 0 - 12 °
0.6 kg
1 (Separate packing)
32
Product
List
Product
Category
A264518R0v06
DX-1710-2690-65-18i-M-R
EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……….y
y - Yellow
y
Pattern sample for reference
1710 - 2690 MHz
(y)
33
Product
List
Product
Category
A264521R1v06
DX-1695-2690-65-21i-M-R
EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 2.0m
Antenna Specifications
Electrical Properties
1695 – 2690 (y1)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 6 , continuously adjustable
at mid Tilt
19.8
20.3
20.7
21.0
19.8 ±0.5
20.3 ±0.5
20.7 ±0.5
21.0 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 18
> 17
> 17
> 17
Horizontal 3dB beam width (°)
68 ±4
65 ±3
61 ±2
59 ±4
4.4 ±0.4
4.0 ±0.4
3.5 ±0.2
3.3 ±0.3
Gain (dBi)
over all Tilts
Vertical 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 27
> 27
> 27
> 27
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
106
Antenna dimensions (H x W x D) (mm)
2099 x 155 x 89
Packing dimensions (H x W x D) (mm)
2515 x 210 x 170
Antenna weight (kg)
9.8
Clamps weight (kg)
3.3 (2 units)
Antenna packing weight (kg)
801
Mechanical Properties
17.2 (Included clamps)
Mast diameter supported (mm)
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
2099
Operational temperature (℃)
2130
50 -115
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1310
Frontal:
360 (at 150 km/h)
Lateral:
180 (at 150 km/h)
Maximum: 475 (at 150 km/h)
2 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt:
0 - 12 °
1.3 kg
1 (Separate packing)
34
Product
List
Product
Category
A264521R1v06
DX-1695-2690-65-21i-M-R
EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……y1
y - Yellow
y1
Pattern sample for reference
1695 - 2690 MHz
(y1)
35
Product
List
Product
Category
A264521R2v06
DX-1695-2690-33-21i-M-R
EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 1.4m
Antenna Specifications
Electrical Properties
1695 – 2690 (y1)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
2 - 12 , continuously adjustable
at mid Tilt
19.5
19.8
19.9
20.0
19.4 ±0.5
19.7 ±0.4
19.8 ±0.4
19.9 ±0.5
> 17
> 17
> 16
> 16
Horizontal 3dB beam width (°)
36 ±2.0
34 ±1.5
32 ±1.5
30 ±1.5
Vertical 3dB beam width (°)
7.1 ±0.5
6.5 ±0.5
5.5 ±0.4
5.1 ±0.4
Gain (dBi)
over all
Tilts
Side lobe suppression for first
side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 29
> 32
> 33
> 33
Cross polar ratio (dB)
> 21
> 21
> 20
> 24
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
1365 x 299 x 109
Packing dimensions (H x W x D) (mm)
1660 x 347 x 180
68
Antenna weight (kg)
13.4
Clamps weight (kg)
3.3 (2 units)
Antenna packing weight (kg)
(56)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
21.7 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1251
50 - 115
1365
Mast diameter supported (mm)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
58
Frontal:
385 (at 150 km/h)
Lateral:
130 (at 150 km/h)
Maximum: 440 (at 150 km/h)
Wind load (N)
2 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Downtilt kit ASMDT0B01
Description
Weight
Units per antenna
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
36
Product
List
Product
Category
A264521R2v06
DX-1695-2690-33-21i-M-R
EasyRET High-Band 2-Port Antenna with 1 Integrated RCU - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
a
Integrated RET S/N:
a HWxxxx……y1
y - Yellow
y
Pattern sample for reference
1695 - 2690 MHz
(y1)
37
Product
List
Product
Category
ADU4518R6v06
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
EasyRET 2H 4-Port Antenna with 2 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
2 x (1710 - 2690) (Ly1/Ry2)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable, each band separately
at mid Tilt
17.4
17.9
18.2
18.4
17.3 ±0.3
17.7 ±0.4
18.0 ±0.3
18.2 ±0.4
> 18
> 18
> 18
> 18
Horizontal 3dB beam width (°)
66 ±2.7
65 ±2.7
63 ±2.8
61 ±2.6
Vertical 3dB beam width (°)
6.9 ±0.3
6.3 ±0.3
5.5 ±0.3
5.0 ±0.3
Gain (dBi)
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB)
> 27
> 27
> 27
> 27
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Antenna dimensions (H x W x D) (mm)
1365 x 269 x 86
Packing dimensions (H x W x D) (mm)
1720 x 360 x 140
Antenna weight (kg)
11.3
Clamps weight (kg)
3.3 (2 units)
Antenna packing weight (kg)
68
18.3 (included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
1274
1365
Frontal:
340 (at 150 km/h)
Lateral:
105 (at 150 km/h)
Maximum: 395 (at 150 km/h)
Wind load (N)
200
Survival wind speed (km/h)
250
Connector
4 x 4.3-10 Female
Connector position
Bottom
46
Accessories
Item
(45)
Mechanical Properties
Model
Downtilt kit ASMDT0B01
Description
Weight
Units per antenna
Mechanical downtilt: 0 - 16 °
1.3 kg
1 (Separate packing)
38
Product
List
Product
Category
ADU4518R6v06
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
EasyRET 2H 4-Port Antenna with 2 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.6 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
a
b
Integrated RET S/N:
a HWxxxx……..Ly1
b HWxxxx……..Ry2
y - Yellow
L - Left array
R - Right array
y1
y2
Pattern sample for reference
1710 - 2690 MHz
(Ly1)
1710 - 2690 MHz
(Ry2)
39
Product
List
Product
Category
ADU4521R0v06
DXX-1695-2690/1695-2690-65/65-21i/21i-M/M-R
EasyRET 2H 4-Port Antenna with 2 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (1695 - 2690) (Ly1/Ry2)
Frequency range (MHz)
1695 - 1990
1920 - 2200
2200 - 2490
Polarization
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 6 , continuously adjustable , each band separately
at mid Tilt
20.0
20.5
20.7
21.0
20.0 ±0.5
20.5 ±0.5
20.7 ±0.5
21.0 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 18
> 17
> 17
> 16
Horizontal 3dB beam width (°)
65 ±4
62 ±3
60 ±3
58 ±5
4.4 ±0.4
4.0 ±0.4
3.5 ±0.2
3.3 ±0.3
Gain (dBi)
over all Tilts
Vertical 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 26
> 26
> 26
> 26
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
2099 x 269 x 86
Packing dimensions (H x W x D) (mm)
2415 x 340 x 160
Antenna weight (kg)
16.2
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(743)
Antenna dimensions (H x W x D) (mm)
25.4 (Included clamps)
Mast diameter supported (mm)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1310
2099
50-115
-40 .. +65
Frontal:
560 (at 150 km/h)
Lateral:
170 (at 150 km/h)
Maximum: 645 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 4.3-10 Female Connector
Bottom
46
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
40
Product
List
Product
Category
ADU4521R0v06
DXX-1695-2690/1695-2690-65/65-21i/21i-M/M-R
EasyRET 2H 4-Port Antenna with 2 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Ly1
HWxxxx……Ry2
y - Yellow
L - Left array
R - Right array
y1
y2
Pattern sample for reference
1695 - 2690 MHz
(Ly1/Ry2)
41
Product
List
Product
Category
ADU4521R3v06
DXX-1710-2690/1710-2690-33/33-21i/21i-M/M-R
EasyRET 2H 4-Port Antenna with 2 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
2 x (1710 - 2690) (Ly1/Ry2)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
20.1
20.2
20.4
20.6
20.0 ±0.9
20.1 ±0.8
20.3 ±0.6
20.5 ±0.6
> 15
> 15
> 15
> 15
36 ±4
34 ±4
30 ±4
28 ±4
7.0 ±0.5
6.3 ±0.5
5.6 ±0.5
5.1 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation (dB)
≥ 25
Front to back ratio, ±30° (dB)
> 25
> 25
> 25
> 25
Cross polar ratio at boresight
(dB)
> 15
> 15
> 15
> 15
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)
Max. effective power whole
antenna (W)
700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
1399 x 449 x 196
Packing dimensions (H x W x D) (mm)
1665 x 535 x 250
Antenna weight (kg)
20.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(67)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
31.1 (Included clamps)
Mast diameter supported (mm)
50 - 115
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1273
1399
Radome material
Frontal:
400 (at 150 km/h)
Lateral:
235 (at 150 km/h)
Maximum: 525 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 4.3-10 Female
Bottom
59
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt
kit
ASMDT0D01
Mechanical downtilt:
0 - 16°
2.1 kg
1 (Separate packing)
42
Product
List
Product
Category
ADU4521R3v06
DXX-1710-2690/1710-2690-33/33-21i/21i-M/M-R
EasyRET 2H 4-Port Antenna with 2 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.6 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Ly1
HWxxxx……Ry2
y - Yellow
L - Left array
R - Right array
y1
y2
Pattern sample for reference
1710 - 2690 MHz
(Ly1/Ry2)
43
Product
List
Product
Category
ATR4518R14v06
DXXX-1710-2690/1710-2690/1710-2690-65/65/65
-18i/18i/18i-M/M/M-R
EasyRET 3H 6-Port Antenna with 3 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
3 x (1710 - 2690) (Ly1/Cy2/Ry3)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable, each band separately
at mid Tilt
17.6
18.0
18.4
18.6
17.4 ±0.4
17.8 ±0.4
18.1 ±0.4
18.3 ±0.5
> 19
> 22
> 20
> 19
Horizontal 3dB beam width (°)
66 ±5.5
65 ±4.2
64 ±3.8
60 ±3.2
Vertical 3dB beam width (°)
6.7 ±0.5
6.1 ±0.3
5.4 ±0.4
5.0 ±0.2
Gain (dBi)
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 30
Interband isolation (dB)
≥ 30
Front to back ratio, ±30° (dB)
> 27
> 27
> 29
> 29
Cross polar ratio (dB)
> 26
> 25
> 23
> 23
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)
Max. effective power whole
antenna (W)
700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1365 x 376 x 99
Packing dimensions (H x W x D) (mm)
1730 x 470 x 165
16.0
Clamps weight (kg)
3.3 (2 units)
Antenna packing weight (kg)
68
26 (included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1262
1365
Mast diameter supported (mm)
(51)
Antenna weight (kg)
Frontal:
660 (at 150 km/h)
Lateral:
145 (at 150 km/h)
Maximum: 660 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
250
Connector
52
Survival wind speed (km/h)
6 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Description
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
Weight Units per antenna
2.1 kg
44
1 (Separate packing)
Product
List
Product
Category
ATR4518R14v06
DXXX-1710-2690/1710-2690/1710-2690-65/65/65
-18i/18i/18i-M/M/M-R
EasyRET 3H 6-Port Antenna with 3 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.6 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
b
a HWxxxx..….Ly1
a
c
c HWxxxx…..Ry3
y – Yellow
R - Right array
Pattern sample for reference
1710 - 2690 MHz
(Ly1)
b HWxxxx…..Cy2
1710 - 2690 MHz
(Cy2)
45
y1
y2
y3
L - Left array
C - Center array
1710 - 2690 MHz
(Ry3)
Product
List
Product
Category
AQU4518R21v06
DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/6518i/18i/18i/18i-M/M/M/M-R
EasyRET 4H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
4 x (1710 - 2690) (Ly1/CLy2/CRy3/Ry4)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable, each band separately
at mid Tilt
Gain (dBi)
over all Tilts
17.4
17.7
17.9
18.3
17.2 ±0.5
17.5 ±0.5
17.7 ±0.5
18.0 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 18
> 18
> 19
> 20
Horizontal 3dB beam width (°)
68 ±5
64 ±5
61 ±5
60 ±5
6.8 ±0.5
6.1 ±0.4
5.4 ±0.4
5.0 ±0.3
Vertical 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28 (1710 - 2690 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB)
> 27
> 28
> 28
> 28
Cross polar ratio (dB)
> 22
> 22
> 22
> 23
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)
Max. effective power whole
antenna (W)
800 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Antenna dimensions (H x W x D) (mm)
1499 x 449 x 115
Packing dimensions (H x W x D) (mm)
1885 x 535 x 180
Antenna weight (kg)
23.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(57)
Mechanical Properties
32.0 (included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1385
1499
Mast diameter supported (mm)
-40 .. +65
Frontal:
715 (at 150 km/h)
Lateral:
85 (at 150 km/h)
Maximum: 715 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
250
Connector
57
Survival wind speed (km/h)
8 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Downtilt kit ASMDT0D01
Description
Weight
Units per antenna
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
46
Product
List
Product
Category
AQU4518R21v06
DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/6518i/18i/18i/18i-M/M/M/M-R
EasyRET 4H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.6 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
c
b
a
a HWxxxx……….Ly1
d
y - Yellow
L - Left array
b HWxxxx…....CLy2
c HWxxxx……CRy3
d HWxxxx…......Ry4
R - Right array
y1
y2
y3
y4
C - Center array
Pattern sample for reference
1710 - 2690 MHz
(Ly1/Ry4)
1710 - 2690 MHz
(CLy2/CRy3)
47
Product
List
Product
Category
B. Passive Antenna
Multi-band
B - 3 1LnH
4 Ports - 1L1H
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method Connector
Range (MHz)Beam Width (o)
Downtilt (o)
Dimension(mm)
Model
Page
690-960/
1710-2690
65/65
15/17.5
0-15/2-12
EasyRET2.0
4 x 4.3-10
1499 x 259 x 135
ADU4518R9v06
51
690-960/
1710-2690
65/65
16/18
0-12/2-12
EasyRET2.0
4 x 4.3-10
2087 x 259 x 135
ADU4518R7v06
53
690-960/
1710-2690
65/65
17/18
0-10/2-12
EasyRET2.0
4 x 4.3-10
2555 x 259 x 135
ADU4518R8v06
55
698-960/
1710-2690
65/65
8.5/9
0/0
FET
4 x 4.3-10
299 x 265 x 85
ADU450900v06
57
698-960/
1710-2690
65/65
12/12
0/0
FET
4 x 4.3-10
549 x 265 x 85
ADU451200v06
59
Dimension(mm)
Model
Page
6 Ports - 1L2H
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method Connector
Range (MHz)Beam Width (o)
Downtilt (o)
617-894/
1695-2690/
1695-2690
65/65/65
16/18/18
690-960/
1695-2690/
1695-2690
65/65/65
690-960/
1695-2690/
1695-2690
690-960/
1695-2690/
1695-2690
0-12/012/0-12
EasyRET2.0
6 x 4.3-10
2099 x 399 x 196
ATR4518R28v06
61
15/18/18
0-14/0-10/
EasyRET2.0
0-10
6 x 4.3-10
1499 x 349 x 166
ATR4518R13v06
63
65/65/65
16/18/18
0-10/0-10/
EasyRET2.0
0-10
6 x 4.3-10
1999 x 349 x 166
ATR4518R6v06
65
65/65/65
17/18/18
0-10/0-10/
EasyRET2.0
0-10
6 x 4.3-10
2528 x 349 x 166
ATR4518R11v06
67
48
Product
Category
Multi-band
B - 3 1LnH
6 Ports - 1L2H
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method Connector
Range (MHz)Beam Width (o)
Downtilt (o)
Dimension(mm)
Model
Page
690-960/
1427-2690/
1427-2690
65/65/65
15/18/18
0-14/2-12/
EasyRET2.0
2-12
6 x 4.3-10
1499 x 359 x 178
ATR4518R31v06
69
690-960/
1427-2690/
1427-2690
65/65/65
16/18/18
0-10/2-12/
EasyRET2.0
2-12
6 x 4.3-10
1999 x 359 x 178
ATR4518R30v06
71
690-960/
1427-2690/
1427-2690
65/65/65
17/18/18
0-10/2-12/
EasyRET2.0
2-12
6 x 4.3-10
2550 x 359 x 178
*ATR4518R41v06
73
690-960/
1690-2690/
1690-2690
65/65/65
17/20.5/
20.5
0-10/1-7/
1-7
6 x 4.3-10
2528 x 349 x 166
ATR4521R0v06
74
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method Connector
Range (MHz)Beam Width (o)
Downtilt (o)
Dimension(mm)
Model
Page
EasyRET2.0
8 Ports - 1L3H
690-960/
1427-2690/
1695-2690/
1695-2690
65/65/65/65
15/17.5/
18/18
0-14/2-12/
EasyRET2.0
2-12/2-12
8 x 4.3-10
1499 x 369 x 149
AQU4518R27v06
76
690-960/
1427-2690/
1695-2690/
1695-2690
65/65/65/65
16/17.5/
18/18
2-12/2-12/
EasyRET2.0
2-12/2-12
8 x 4.3-10
1999 x 369 x 149
AQU4518R22v07
79
690-960/
1710-2690/
1710-2690/
1710-2690
65/65/65/65
15/17.5/ 0-14/2-12/
EasyRET2.0
17.5/17.5 2-12/2-12
8 x 4.3-10
1499 x 369 x 149
AQU4518R14v07
82
690-960/
1695-2690/
1695-2690/
1695-2690
65/65/65/65
16/18/
18/18
2-12/2-12/
EasyRET2.0
2-12/2-12
8 x 4.3-10
1999 x 369 x 149
AQU4518R11v07
85
690-960/
1695-2690/
1695-2690/
1695-2690
65/65/65/65
17/18/
18/17.5
0-10/0-10/
EasyRET2.0
0-10/0-10
8 x 4.3-10
2528 x 349 x 166
AQU4518R9v06
88
* Preliminary Issue
49
Product
Category
Multi-band
B - 3 1LnH
10 Ports - 1L4H
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method Connector
Range (MHz)Beam Width (o)
Downtilt (o)
Dimension(mm)
Model
Page
690-960/
1427-2690/
1695-2200/
12490-2690/
1695-2690
65/65/65/
65/65
15/17.5/
17/17.5/
17.5
0-14/2-12/
2-12/2-12/ EasyRET2.0 10 x 4.3-10 1499 x 369 x 149
2-12
APE4518R37v06
90
690-960/
1695-2200/
1695-2200/
2490-2690/
2490-2690
65/65/65/
65/65
16/17.5/
17.5/18/
18
0-10/0-10/
0-10/0-10/ EasyRET2.0 10 x 4.3-10 1999 x 349 x 166
0-10
APE4518R19v06
93
690-960/
1695-2690/
1695-2690/
1695-2690/
1695-2690
65/65/65/
65/65
0-10/2-12/
16/16.5/
2-12/2-12/ EasyRET2.0 10 x 4.3-10 1999 x 349 x 166
16.5/16/16
2-12
APE4516R1v06
95
690-960/
1695-2690/
1695-2690/
1695-2690/
1695-2690
65/65/65/
65/65
0-10/0-10/
17/18/18
0-10/0-10/ EasyRET2.0 10 x 4.3-10 2528 x 349 x 166
/17.5/17.5
0-10
APE4517R0v06
97
Model
Page
ASI4518R30v06
99
12 Ports - 1L5H
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method Connector
Range (MHz)Beam Width (o)
Downtilt (o)
690-960/
1427-2690/
1695-2690/
1695-2690/
1695-2690/
1695-2690
65/65/65/
65/65/65
17/17.5/
1.5/17.5/
17.5/17.5
Dimension(mm)
2-12/2-12/
2-12/2-12/ EasyRET2.0 12 x 4.3-10 2769 x 369 x 149
2-12/2-12
50
Product
Category
ADU4518R9v06
DXX-690-960/1710-2690-65/65-15i/17.5i-M/M-R
EasyRET 1L1H 4-Port Antenna with 2 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
690 – 960 (r)
Frequency range (MHz)
690 803
790 862
1710 – 2690 (y)
824 894
880 960
Polarization
1710 1990
1920 2200
2200 2490
2490 2690
+45° , -45°
Electrical downtilt (°)
0 - 15 , continuously adjustable
at mid Tilt
Gain (dBi)
14.5
14.5
14.6
2 - 12 , continuously adjustable
14.7
over all Tilts 14.5 ±0.3 14.5 ±0.3 14.6 ±0.4 14.7 ±0.4
16.8
17.2
17.4
18.1
16.7 ±0.5
17.1 ±0.5
17.4 ±0.5
17.9 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 17
> 18
> 18
> 17
> 17
> 18
> 18
> 18
Horizontal 3dB beam width (°)
68 ±5
66 ±4
64 ±3
62 ±3
60 ±5
62 ±5
60 ±5
60 ±5
7.2 ±0.7
6.5 ±0.6
5.7 ±0.5
5.3 ±0.3
Vertical 3dB beam width (°)
15.3 ±1
14.0 ±0.7 13.3 ±0.6 12.3 ±0.7
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
< 1.5
≥ 28
Interband isolation (dB)
≥ 28 (690 - 960 // 1710 - 2690 MHz)
Front to back ratio , ±30° (dB)
> 25
> 26
> 26
> 25
> 26
> 28
> 28
> 29
Cross polar ratio (dB)
> 20
> 26
> 23
> 20
> 25
> 26
> 24
> 21
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
1499 x 259 x 135
Packing dimensions (H x W x D) (mm)
1835 x 360 x 225
Antenna weight (kg)
16.5
Clamps weight (kg)
3.3 (2 units)
Antenna packing weight (kg)
68
(181)
Antenna dimensions (H x W x D) (mm)
25.8 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
405 (at 150 km/h)
Lateral:
185 (at 150 km/h)
Maximum: 545 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1499
50 - 115
1265
Mast diameter supported (mm)
4 x 4.3-10 Female
Bottom
53
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
51
Product
List
Product
Category
ADU4518R9v06
DXX-690-960/1710-2690-65/65-15i/17.5i-M/M-R
EasyRET 1L1H 4-Port Antenna with 2 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
a
b
Integrated RET S/N:
a HWxxxx……..r
b HWxxxx….....y
r - Red
y - Yellow
y
r
Pattern sample for reference
690 - 960 MHz
(r)
1710 - 2690 MHz
(y)
52
Product
List
Product
Category
ADU4518R7v06
DXX-690-960/1710-2690-65/65-16i/18i-M/M-R
EasyRET 1L1H 4-Port Antenna with 2 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 – 960 (r)
Frequency range (MHz)
690 - 803
790 - 862
1710 – 2690 (y)
824 - 894
880 - 960 1710 - 19901920 - 22002200 - 24902490 - 2690
Polarization
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
15.5
15.9
16.0
16.1
15.5 ±0.4
15.7 ±0.4
15.8 ±0.3
16.0 ±0.3
> 18
> 18
> 18
69 ±2.4
66 ±1.6
10.5 ±0.5
9.8 ±0.4
at mid Tilt
Gain (dBi)
over all
Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12 , continuously adjustable
17.1
17.5
17.8
18.3
17.0 ±0.5
17.4 ±0.5
17.7 ±0.3
18.1 ±0.4
> 18
> 17
> 17
> 17
> 17
64 ±1.5
63 ±2.1
63 ±4.8
61 ±4.0
60±2.2
60 ±4.0
9.5 ±0.4
8.9 ±0.4
7.2 ±0.5
6.5 ±0.5
5.6 ±0.3
5.5 ±0.3
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28 (690 - 960 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB)
> 24
> 25
> 25
> 25
> 24
> 25
> 25
> 26
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
> 20
> 20
> 20
> 20
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2087 x 259 x 135
Packing dimensions (H x W x D) (mm)
2380 x 315 x 220
20.2
Clamps weight (kg)
(779)
Antenna weight (kg)
68
3.3 (2 units)
Antenna packing weight (kg)
28.5 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
1255
Operational temperature (℃)
Frontal:
590 (at 150 km/h)
Lateral:
270 (at 150 km/h)
Maximum: 795 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2087
Mast diameter supported (mm)
4 x 4.3-10 Female
Connector position
Bottom
53
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0C01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
53
Product
List
Product
Category
ADU4518R7v06
DXX-690-960/1710-2690-65/65-16i/18i-M/M-R
EasyRET 1L1H 4-Port Antenna with 2 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
a
b
Integrated RET S/N:
a HWxxxx…...r
b HWxxxx……y
r - Red
y - Yellow
y
r
Pattern sample for reference
690 - 960 MHz
(r)
1710 - 2690 MHz
(y)
54
Product
List
Product
Category
ADU4518R8v06
DXX-690-960/1710-2690-65/65-17i/18i-M/M-R
EasyRET 1L1H 4-Port Antenna with 2 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 – 960 (r)
Frequency range (MHz)
690 - 803
790 - 862
1710 – 2690 (y)
824 - 894
880 - 960 1710 - 19901920 - 22002200 - 24902490 - 2690
Polarization
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
2 - 12 , continuously adjustable
16.6
16.7
17.1
17.3
17.1
17.5
17.8
18.3
16.5 ±0.3
16.6 ±0.4
17.0 ±0.4
17.2 ±0.4
17.0 ±0.5
17.4 ±0.5
17.7 ±0.3
18.1 ±0.4
> 17
> 18
> 18
> 18
> 17
> 17
> 17
> 17
Horizontal 3dB beam width (°)
69 ±2.5
66 ±2.5
64 ±2.3
63 ±2.0
63 ±4.8
61 ±4.0
60 ±2.2
60 ±4.0
Vertical 3dB beam width (°)
8.9 ±0.5
8.3 ±0.4
7.9 ±0.4
7.3 ±0.4
7.2 ±0.5
6.5 ±0.5
5.6 ±0.3
5.5 ±0.3
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28 (690 - 960 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB)
> 24
> 25
> 25
> 26
> 24
> 25
> 25
> 26
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
> 20
> 20
> 20
> 20
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
2555 x 259 x 135
Packing dimensions (H x W x D) (mm)
2970 x 315 x 220
Antenna weight (kg)
23.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(567)
Antenna dimensions (H x W x D) (mm)
33.8 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1935
Frontal:
745 (at 150 km/h)
Lateral:
340 (at 150 km/h)
Maximum: 1005 (at 150 km/h)
Wind load (N)
4 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
55
53
Accessories
Product
List
Product
Category
2555
Mast diameter supported (mm)
ADU4518R8v06
DXX-690-960/1710-2690-65/65-17i/18i-M/M-R
EasyRET 1L1H 4-Port Antenna with 2 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
a
b
Integrated RET S/N:
a HWxxxx…...r
b HWxxxx……y
r - Red
y - Yellow
y
r
Pattern sample for reference
1710 - 2690 MHz
(y)
690 - 960 MHz
(r)
56
Product
List
Product
Category
ADU450900v06
DXX-698-960/1710-2690-65/65-8.5i/9i-0F
Antenna Specifications
Electrical Properties
698 – 960 (r1)
Frequency range (MHz)
698 - 806
Polarization
Electrical downtilt (°)
Gain (dBi)
1710 – 2690 (y1)
806 - 960
1710 - 2200
2200 - 2490
+45° , -45°
+45° , -45°
0, fixed
0, fixed
2490 - 2690
8.0 ±0.5
8.0 ±0.5
8.5 ±0.5
8.5 ±0.5
9.0 ±0.3
Horizontal 3dB beam width (°)
73 ±4
70 ±5
65 ±7
69 ±7
61 ±6
Vertical 3dB beam width (°)
69 ±5
68 ±5
57 ±5
56 ±6
52 ±5
VSWR
< 1.9
< 1.9
Cross polar isolation (dB)
≥ 22
≥ 22
Interband isolation (dB)
≥ 23
≥ 23
Front to back ratio , ±30° (dB)
> 20
> 20
> 20
> 20
> 22
Cross polar ratio (dB)
> 18
> 18
> 15
> 16
> 16
0°
Max. effective power per port
(W)
100 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
80 (at 50℃ ambient temperature)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
299 x 265 x 85
Packing dimensions (H x W x D) (mm)
755 x 345 x 230
Antenna weight (kg)
3.5
Bracket weight (kg)
1.2 (1 unit)
Bracket angular
range (°)
Azimuth
±30
Mechanical downtilt
±15
Antenna packing weight (kg)
Mast diameter
supported (mm)
6.5 (Included bracket)
Cement or metal
pole
Φ100 - 360
Wooden pole
Φ200 - 420
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
Wind load (N)
-55.. +70
Frontal:
70 (at 150 km/h)
Lateral:
20 (at 150 km/h)
Maximum: 80 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
Connector position
4 x 4.3-10 Female
Bottom
57
Product
List
Product
Category
ADU450900v06
DXX-698-960/1710-2690-65/65-8.5i/9i-0F
150
299
(149)
166
76
60
y1
r1
Pattern sample for reference
698- 960 MHz
(r1)
1710- 2690 MHz
(y1)
58
Product
List
Product
Category
ADU451200v06
DXX-698-960/1710-2690-65/65-12i/12i-0F
Antenna Specifications
Electrical Properties
698 – 960 (r1)
Frequency range (MHz)
698 - 806
Polarization
Electrical downtilt (°)
Gain (dBi)
1710 – 2690 (y1)
806 - 960
1710 - 2200
2300 - 2690
+45° , -45°
+45° , -45°
0, fixed
0, fixed
10.5 ±0.5
11 ±0.5
11 ±0.5
11.5 ±0.5
Horizontal 3dB beam width (°)
73 ±4
68 ±4
68 ±5
61 ±6
Vertical 3dB beam width (°)
40 ±4
35 ±4
30 ±4
24 ±4
VSWR
< 1.8
< 1.8
Cross polar isolation (dB)
≥ 22
≥ 22
Interband isolation (dB)
≥ 23
≥ 23
Front to back ratio , ±30° (dB)
> 22
> 24
> 24
> 23
Cross polar ratio (dB)
> 18
> 18
> 16
> 16
0°
Max. effective power per port
(W)
100 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
80 (at 50℃ ambient temperature)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
549 x 265 x 85
Packing dimensions (H x W x D) (mm)
755 x 345 x 230
Antenna weight (kg)
4.7
Bracket weight (kg)
1.2 (1 unit)
Bracket angular
range (°)
Azimuth
±30
Mechanical downtilt
±15
Antenna packing weight (kg)
Mast diameter
supported (mm)
7.7 (Included bracket)
Cement or metal pole
Φ100 - 360
Wooden pole
Φ200 - 420
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55.. +70
Wind load (N)
Frontal:
130 (at 150 km/h)
Lateral:
35 (at 150 km/h)
Maximum: 150 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
Connector
250
4 x 4.3-10 Female
Connector position
Bottom
59
Product
List
Product
Category
ADU451200v06
DXX-698-960/1710-2690-65/65-12i/12i-0F
76
549
275
(274)
166
60
y1
r1
Pattern sample for reference
698- 960 MHz
(r1)
1710- 2690 MHz
(y1)
60
Product
List
Product
Category
ATR4518R28v06
DXXX-617-894/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET 1L2H 6-Port Antenna with 3 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
617 – 894 (r1)
Frequency range (MHz)
617 - 698
Polarization
698 - 798
2 x (1695 - 2690) (Ly1/Ry2)
798 - 894
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
+45° , -45°
2 - 12, continuously adjustable, each band separately
over all Tilts
15.2
15.8
16.2
17.3
17.6
17.8
18.2
15.0 ±0.5
15.7 ±0.5
16.0 ±0.5
17.1 ±0.5
17.4 ±0.5
17.6 ±0.5
18.0 ±0.5
> 17
> 17
> 17
> 16
> 17
> 17
> 17
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
67 ±3
64 ±3
61 ±3
65 ±5
63 ±3
62 ±4
60 ±5
12.5 ±0.8
10.8 ±0.7
9.4 ±0.5
6.7 ±0.6
6.0 ±0.5
5.4 ±0.3
5.0 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 23
> 25
> 25
> 26
> 27
> 26
> 26
Cross polar ratio (dB)
> 20
> 20
> 20
> 18
> 19
>20
> 20
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
2099 x 399 x 196
Packing dimensions (H x W x D) (mm)
2285 x 465 x 250
Antenna weight (kg)
29.5
Clamps weight (kg)
4.2 (2 units)
41.1 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1310
Mast diameter supported (mm)
(725)
Antenna packing weight (kg)
68
Frontal:
570 (at 150 km/h)
Lateral:
340 (at 150 km/h)
Maximum: 725 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
2099
Antenna dimensions (H x W x D) (mm)
200
Survival wind speed (km/h)
250
Connector
6 x 4.3-10 Female
Connector position
Bottom
64
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
61
Product
List
Product
Category
ATR4518R28v06
DXXX-617-894/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET 1L2H 6-Port Antenna with 3 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
Integrated RET S/N:
a HWxxxx….Ly1
b HWxxxx……r1
c
a
c HWxxxx….Ry2
r - Red
L - Left array
y - Yellow
R - Right array
y1
r1
y2
Pattern sample for reference
617 - 894 MHz
(r1)
1695 - 2690 MHz
(Ly1/Ry2)
62
Product
List
Product
Category
ATR4518R13v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-15i/18i/18i-M/M/M-R
EasyRET 1L2H 6-Port Antenna with 3 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
2 x (1695 - 2690) (Ly1/Ry2)
1695 1990
690 - 803 790 - 862 824 - 894 880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
0 - 10 , continuously adjustable , each band
separately
0 - 14 , continuously adjustable
over all Tilts
14.4
14.5
14.7
15.1
17.5
17.8
18.2
18.3
14.3 ±0.5
14.5 ±0.5
14.8 ±0.5
15.0 ±0.5
17.3 ±0.6
17.7 ±0.5
18.1 ±0.6
18.2 ±0.5
> 16
> 17
> 17
> 17
> 19
> 19
> 19
> 19
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
65 ±2.5
64 ±2.0
64 ±2.0
64 ±3.2
65 ±3.9
63 ±3.3
62 ±4.8
60 ±4.5
15.6 ±1.2
13.7 ±0.9
13.1 ±0.8
12.2 ±0.8
7.1 ±0.6
6.5 ±0.5
5.8 ±0.5
5.2 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 30
Front to back ratio , ±30° (dB)
> 23
> 24
> 24
> 23
> 25
> 27
> 26
> 25
Cross polar ratio (dB)
> 19
> 20
> 20
> 22
> 18
> 19
> 20
> 19
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Max. effective power whole
antenna (W)
700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
1499 x 349 x 166
Packing dimensions (H x W x D) (mm)
1740 x 445 x 230
Antenna weight (kg)
19.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
29.6 (included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1310
1499
Mast diameter supported (mm)
(137)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
Frontal:
460 (at 150 km/h)
Lateral:
130 (at 150 km/h)
Maximum: 480 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
6 x 4.3-10 Female
Connector position
52
Connector
Bottom
Accessories
Item
Downtilt
kit
Model
Description
ASMDT0D01 Mechanical downtilt: 0 - 16 °
Weight
Units per antenna
2.1 kg
1 (Separate packing)
63
Product
List
Product
Category
ATR4518R13v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-15i/18i/18i-M/M/M-R
EasyRET 1L2H 6-Port Antenna with 3 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.6 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
Integrated RET S/N:
a HWxxxx….Ly1
b HWxxxx……r1
a
c
c HWxxxx….Ry2
r - Red
L - Left array
y1
y - Yellow
R - Right array
r1
y2
Pattern sample for reference
690 - 960 MHz
(r1)
1695 - 2690 MHz
(Ly1)
64
1695 - 2690 MHz
(Ry2)
Product
List
Product
Category
ATR4518R6v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET 1L2H 6-Port Antenna with 3 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
2 x (1695 - 2690) (Ly1/Ry2)
1695 1990
690 - 803 790 - 862 824 - 894 880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
at mid Tilt
Gain (dBi)
0 - 10 , continuously adjustable , each band
separately
0 - 10 , continuously adjustable
Electrical downtilt (°)
15.5
over all
Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
16.0
16.1
17.1
17.5
17.8
18.3
17.1 ±0.5
17.5 ±0.4
17.8 ±0.5
18.2 ±0.4
> 18
> 18
> 18
> 18
> 19
> 19
> 19
> 19
65 ±1.7
65 ±1.4
65 ±1.7
65 ±2.4
65 ±4.3
64 ±3.2
63 ±4.4
62 ±4.1
9.5 ±0.5
9.2 ±0.6
8.6 ±0.5
7.1 ±0.5
6.5 ±0.5
5.8 ±0.4
5.3 ±0.2
10.3 ±0.7
Vertical 3dB beam width (°)
15.9
15.5 ±0.5 15.8 ±0.5 15.8 ±0.5 16.0 ±0.6
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 30
Front to back ratio , ±30° (dB)
> 25
> 25
> 25
> 25
> 25
> 27
> 26
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 17
> 17
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
1999 x 349 x 166
Packing dimensions (H x W x D) (mm)
2240 x 435 x 220
Antenna weight (kg)
23.3
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(637)
Antenna dimensions (H x W x D) (mm)
34.1 (included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1310
1999
Mast diameter supported (mm)
Frontal:
630 (at 150 km/h)
Lateral:
180 (at 150 km/h)
Maximum: 665 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
6 x 4.3-10 Female
Bottom
52
Connector position
Accessories
Item
Unit: mm
Model
Downtilt kit ASMDT0D01
Description
Weight
Units per antenna
Mechanical downtilt:
0 - 12 °
2.1 kg
1 (Separate packing)
65
Product
List
Product
Category
ATR4518R6v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET 1L2H 6-Port Antenna with 3 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.6 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx….Ly1
HWxxxx……r1
HWxxxx….Ry2
r - Red
L - Left array
y1
y - Yellow
R - Right array
r1
y2
Pattern sample for reference
690 - 960 MHz
(r1)
1695 - 2690 MHz
(Ly1)
66
1695 - 2690 MHz
(Ry2)
Product
List
Product
Category
ATR4518R11v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-17i/18i/18i-M/M/M-R
EasyRET 1L2H 6-Port Antenna with 3 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
2 x (1695 - 2690) (Ly1/Ry2)
1695 1990
690 - 803 790 - 862 824 - 894 880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
0 - 10 , continuously adjustable , each band
separately
0 - 10 , continuously adjustable
over all
Tilts
16.5
16.7
16.8
17.0
17.1
17.5
17.8
18.2
16.4 ±0.4
16.6 ±0.3
16.7 ±0.2
16.8 ±0.4
17.1 ±0.5
17.5 ±0.4
17.8 ±0.5
18.2 ±0.3
> 17
> 17
> 17
> 17
> 19
> 19
> 19
> 19
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
66 ±1.3
66 ±1.4
65 ±1.3
65 ±1.9
65 ±4.6
64 ±4.1
63 ±3.4
62 ±4.1
Vertical 3dB beam width (°)
9.0 ±0.6
8.3 ±0.4
7.5 ±0.4
7.2 ±0.4
7.1 ±0.5
6.5 ±0.5
5.8 ±0.3
5.3 ±0.2
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 30
Front to back ratio , ±30° (dB)
> 25
> 26
> 27
> 26
> 25
> 27
> 26
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
2528 x 349 x 166
Packing dimensions (H x W x D) (mm)
2890 x 435 x 210
Antenna weight (kg)
26.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(591)
Antenna dimensions (H x W x D) (mm)
37.6 (included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
Lateral:
Maximum:
Wind load (N)
825 (at 150 km/h)
240 (at 150 km/h)
870 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2528
50 - 115
1885
Mast diameter supported (mm)
6 x 4.3-10 Female
Connector position
Bottom
Item
Model
Downtilt kit ASMDT0D01
Description
Weight
Units per antenna
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
67
52
Accessories
Product
List
Product
Category
ATR4518R11v06
DXXX-690-960/1695-2690/1695-2690-65/65/65-17i/18i/18i-M/M/M-R
EasyRET 1L2H 6-Port Antenna with 3 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.6 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
Integrated RET S/N:
a HWxxxx….Ly1
b HWxxxx……r1
c
a
c HWxxxx….Ry2
y1
r - Red
L - Left array
y - Yellow
R - Right array
r1
y2
Pattern sample for reference
690 - 960 MHz
(r1)
1695 - 2690 MHz
(Ly1)
68
1695 - 2690 MHz
(Ry2)
Product
List
Product
Category
ATR4518R31v06
DXXX-690-960/1427-2690/1427-2690-65/65/65-15i/18i/18i-M/M/M-R
EasyRET 1L2H 6-Port Antenna with 3 Integrated RCUs - 1.5m
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
690 803
790 862
2 x (1427 - 2690) (Ly1/Ry2)
824 894
880 960
1427 1518
Polarization
1695 1990
2200 2490
2490 2690
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable
2 - 12 , continuously adjustable , each band separately
at mid Tilt
14.2
14.5
14.6
14.8
16.1
over all Tilts
14.1
±0.5
14.4
±0.5
14.6
±0.5
14.7
±0.5
16.0 ±0.4
Side lobe suppression for first
side lobe above main beam
(dB)
> 16
> 17
> 17
> 17
> 15
> 16
Horizontal 3dB beam width (°)
69 ±5
67 ±4
66 ±4
65 ±4
67 ±5
15.0
±1.1
13.7
±0.8
13.2
±0.8
12.3
±0.8
8.0 ±0.5
Gain (dBi)
1920 2200
Vertical 3dB beam width (°)
17.2
17.6
17.9
18.0
17.8 ±0.5
17.7 ±0.6
> 16
> 16
> 15
64 ±5
63 ±5
62 ±5
58 ±5
6.6 ±0.5
5.9 ±0.5
5.2 ±0.4
4.8 ±0.4
17.1 ±0.6
17.5 ±0.5
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 23
> 24
> 23
> 22
> 25
> 26
> 26
> 24
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 16
> 17
> 17
> 18
> 15
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Packing dimensions (H x W x D) (mm)
1865 x 410 x 225
Antenna weight (kg)
22.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(137)
1499 x 359 x 178
29.5 (included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1310
Mast diameter supported (mm)
Frontal:
475 (at 150 km/h)
Lateral:
140 (at 150 km/h)
Maximum: 495 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
6 x 4.3-10 Female
Bottom
52
Connector position
Accessories
Item
1499
Antenna dimensions (H x W x D) (mm)
Model
Downtilt kit ASMDT0D01
Description
Weight
Units per antenna
Mechanical downtilt:
0 - 16 °
2.1 kg
1 (Separate packing)
69
Product
List
Product
Category
ATR4518R31v06
DXXX-690-960/1427-2690/1427-2690-65/65/65-15i/18i/18i-M/M/M-R
EasyRET 1L2H 6-Port Antenna with 3 Integrated RCUs - 1.5m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
Integrated RET S/N:
a HWxxxx….Ly1
b HWxxxx……r1
c HWxxxx….Ry2
a
c
r - Red
L - Left array
y - Yellow
R - Right array
y1
r1
y2
Pattern sample for reference
690 - 960 MHz
(r1)
1427 - 2690 MHz
(Ly1)
70
1427 - 2690 MHz
(Ry2)
Product
List
Product
Category
ATR4518R30v06
DXXX-690-960/1427-2690/1427-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET 1L2H 6-Port Antenna with 3 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
690 803
790 862
2 x (1427 - 2690) (Ly1/Ry2)
824 894
880 960
1427 1518
Polarization
1695 1990
1920 2200
2200 2490
2490 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
at mid Tilt
Gain (dBi)
over all Tilts
15.2
15.7
2 - 12 , continuously adjustable , each band separately
15.8
15.1 ±0.5 15.4 ±0.5 15.6 ±0.5 15.7 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 16
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.5
> 16
> 16
15.9
17.1
17.5
17.7
17.8
15.8 ±0.6
17.0 ±0.5
17.4 ±0.5
17.6 ±0.5
17.7 ±0.5
> 15
> 16
> 16
> 16
> 16
> 16
68 ±5
67 ±5
66 ±5
65 ±5
68 ±6
64 ±6
63 ±6
62 ±6
59 ±6
10.8 ±0.8
9.9 ±0.6
9.4 ±0.5
8.7 ±0.5
8.1 ±0.5
6.5 ±0.5
5.8 ±0.5
5.2 ±0.4
4.8 ±0.4
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 25
> 25
> 25
> 25
> 23
> 25
> 25
> 25
> 24
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 17
> 17
> 17
> 17
> 16
0°
Max. effective power per port
(W)
400 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Max. effective power whole
antenna (W)
700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
1999 x 359 x 178
2350 x 415 x 240
Antenna weight (kg)
25.6
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(637)
Antenna dimensions (H x W x D) (mm)
Packing dimensions (H x W x D) (mm)
38.6 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1310
1999
Frontal:
650 (at 150 km/h)
Lateral:
195 (at 150 km/h)
Maximum: 680 (at 150 km/h)
Wind load (N)
6 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt
kit
ASMDT0D01
Mechanical downtilt:
0 - 12 °
2.1 kg
1 (Separate packing)
71
52
Accessories
Product
List
Product
Category
ATR4518R30v06
DXXX-690-960/1427-2690/1427-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET 1L2H 6-Port Antenna with 3 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
Integrated RET S/N:
a HWxxxx….Ly1
b HWxxxx……r1
c HWxxxx….Ry2
a
c
y1
r - Red
L - Left array
r1
y2
y - Yellow
R - Right array
Pattern sample for reference
690 - 960 MHz
(r1)
1427 - 2690 MHz
(Ly1/Ry2)
72
Product
List
Product
Category
ATR4518R41v06
D03X-690-960/2x1427-2690-3x65-17i/2x18i-3xM-R
EasyRET 1L2H 6-Port Antenna with Integrated RCUs - 2.6m
Preliminary Issue
Electrical Properties
Frequency range (MHz)
690 - 960
2 x (1427 - 2690)
0 - 10
2 - 12
16.8
17.8
Side lobe suppression for first
side lobe above main beam (Typ.)
(dB)
16
16
Horizontal 3dB beam width (°)
65
65
Vertical 3dB beam width (°)
8
6
Electrical downtilt (°)
Gain (dBi)
VSWR
< 1.5
Front to back ratio, copolar (dB)
Typ. 25
Typ. 25
Cross polar ratio (dB)
Typ. 17
Typ. 17
0°
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2550 x 359 x 178
Antenna net weight (kg)
32
Mechanical downtilt (°)
0-8
Windload (N)
Connector
Frontal:
860 (at 150 km/h)
Lateral:
260 (at 150 km/h)
Maximum: 905 (at 150 km/h)
6 x 4.3-10 Female
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
73
Product
List
Product
Category
ATR4521R0v06
DXXX-690-960/1695-2690/1695-2690-65/65/65
-17i/20.5i/20.5i-M/M/M-R
EasyRET 1L2H 6-port Antenna with Integrated 3 RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
over all Tilts
880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
+45° , -45°
0 - 10 , continuously adjustable, each band
separately
1 - 7 , continuously adjustable, each band
separately
16.2
16.5
16.7
17.0
19.5
19.8
20.1
20.4
16.1 ±0.4
16.3 ±0.4
16.5 ±0.4
16.8 ±0.4
19.4 ±0.5
19.7 ±0.4
20.1 ±0.4
20.3 ±0.5
> 16
> 15
> 16
> 17
> 17
> 17
> 16
> 16
Side lobe suppression for first
side lobe above main beam
(Typ. ) (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 x (1695 - 2690) (Ly1/Ry2)
824 - 894
68 ±5
66 ±5
65 ±5
64 ±5
62 ±5
62 ±5
61 ±5
61 ±5
8.8 ±0.8
8.0 ±0.6
7.7 ±0.3
7.3 ±0.3
4.1 ±0.4
3.7 ±0.4
3.3 ±0.4
3.1 ±0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 30
Front to back ratio , ±30° (dB)
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
50
50
DC Ground
DC Ground
* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
Antenna dimensions (H x W x D) (mm)
2528 x 349 x 166
Packing dimensions (H x W x D) (mm)
2880 x 415 x 245
Antenna weight (kg)
(591)
Mechanical Properties
30.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
46.3 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
1885
Operational temperature (°C)
Frontal:
825 (at 150 km/h)
Lateral:
240 (at 150 km/h)
Maximum: 870 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
2528
Mast diameter supported (mm)
200
Survival wind speed (km/h)
250
Connector
6 x 4.3-10 Female
Connector position
Bottom
Accessories
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
52
Item
74
Product
List
Product
Category
ATR4521R0v06
DXXX-690-960/1695-2690/1695-2690-65/65/65
-17i/20.5i/20.5i-M/M/M-R
EasyRET 1L2H 6-port Antenna with Integrated 3 RCUs - 2.6m
Antenna Information Management Module (AIMM)
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
Integrated RET S/N:
a HWxxxx….Ly1
b HWxxxx……r1
c
a
c HWxxxx….Ry2
r - Red
L - Left array
y - Yellow
R - Right array
y1
r1
y2
Pattern sample for reference
690 - 960 MHz
(r1)
1695 - 2690 MHz
(Ly1/Ry2)
75
Product
List
Product
Category
AQU4518R27v06
DXXXX-690-960/1427-2690/1695-2690/1695-2690-65/65/65/6515i/17.5i/18i/18i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
690 - 803
Polarization
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all
Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
1427 - 2690 (Ry3)
824 - 894
790 - 862
1427 1518
880 - 960
1695 1990
1920 2200
2200 2490
+45° , -45°
+45° , -45°
0 - 14 , continuously adjustable
2 - 12 , continuously adjustable
2490 2690
14.0
14.5
14.7
15.0
15.9
17.3
17.5
17.8
18.1
14.0 ±0.5
14.4 ±0.5
14.7 ±0.5
14.9 ±0.5
15.8 ±0.5
17.1 ±0.5
17.2 ±0.5
17.5 ±0.4
17.6 ±0.5
> 17
> 17
> 16
> 16
> 15
> 17
> 17
> 15
> 16
68 ±1.8
66 ±2.5
64 ±2.5
61 ±2.0
73 ±6.0
69 ±5.5
68 ±5.7
63 ±4.7
58 ±4.0
15.4 ±1.1
13.8 ±1.0
13.2 ±0.7
12.3 ±0.6
8.0 ±0.4
6.5 ±0.6
5.9 ±0.5
5.1 ±0.4
4.8 ±0.4
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 23
> 24
> 26
> 22
> 23
> 23
> 27
> 24
Cross polar ratio (dB)
> 20
> 22
> 22
> 20
> 20
> 22
> 21
> 22
> 17
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1695 - 2690 (Cy2)
Frequency range (MHz)
1695 - 2690 (Ly1)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45°
Electrical downtilt (°)
2 - 12 , continuously adjustable
at mid Tilt
Gain (dBi)
over all
Tilts
Side lobe suppression for first
side lobe above main beam (dB)
2 - 12 , continuously adjustable
17.3
17.5
18.0
18.2
17.4
17.8
18.3
18.4
17.1 ±0.5
17.3 ±0.5
17.8 ±0.4
18.0 ±0.5
17.2 ±0.5
17.6 ±0.5
18.0 ±0.4
18.3 ±0.5
> 16
> 16
> 18
> 18
> 17
> 17
> 18
> 18
Horizontal 3dB beam width (°)
63 ±6.0
62 ±6.0
58 ±5.0
58 ±5.0
69 ±4.0
67 ±4.0
62 ±3.0
58 ±4.0
Vertical 3dB beam width (°)
6.5 ±0.5
5.9 ±0.5
5.1 ±0.2
4.8 ±0.3
6.5 ±0.5
5.9 ±0.4
5.1 ±0.2
4.8 ±0.2
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 27
> 28
> 28
> 27
> 24
> 27
> 27
> 26
Cross polar ratio (dB)
> 22
> 19
> 17
> 22
> 22
> 22
> 19
> 22
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
50
50
DC Ground
DC Ground
* Max. effective power whole antenna: 700 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
76
Product
List
Product
Category
AQU4518R27v06
DXXXX-690-960/1427-2690/1695-2690/1695-2690-65/65/65/6515i/17.5i/18i/18i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna dimensions (H x W x D) (mm)
1499 x 369 x 149
Packing dimensions (H x W x D) (mm)
1790 x 435 x 240
Antenna weight (kg)
24.8
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(58)
Mechanical Properties
35.6 (Included clamps)
Mast diameter supported (mm)
50 - 115
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1381
1499
Radome material
Frontal:
425 (at 150 km/h)
Lateral:
140 (at 150 km/h)
Maximum: 510 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
8 x 4.3-10 Female
Connector position
60
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0 - 16 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
1427 - 2690 MHz(Ry3)
690 - 960 MHz(r1)
1695 - 2690 MHz(Ly1)
1695 - 2690 MHz(Cy2)
77
Product
List
Product
Category
AQU4518R27v06
DXXXX-690-960/1427-2690/1695-2690/1695-2690-65/65/65/6515i/17.5i/18i/18i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)s)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Ly1
HWxxxx……...r1
HWxxxx……Cy2
HWxxxx……Ry3
r - Red
L - Left array
R - Right array
78
y - Yellow
C - Center array
Product
List
y1
y2
y3
r1
Product
Category
AQU4518R22v07
DXXXX-690-960/1427-2690/1695-2690/1695-2690-65/65/65/6516i/17.5i/18i/18i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 – 960 (r1)
Frequency range (MHz)
690 803
790 862
Polarization
880 960
1427 1518
1695 1990
1920 2200
+45° , -45°
Electrical downtilt (°)
Gain (dBi)
1427 – 2690 (Ry3)
824 894
2200 2490
2490 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
at mid Tilt
15.4
15.7
15.9
16.1
16.0
17.3
17.5
17.8
18.1
over all Tilts
15.3
±0.5
15.6
±0.5
15.8
±0.5
16.0
±0.5
15.9 ±0.5
17.1 ±0.5
17.2 ±0.5
17.5 ±0.4
17.6 ±0.5
> 17
> 17
> 17
> 17
> 15
> 17
> 17
> 17
> 16
67 ±3.1
65 ±1.5
65 ±2.0
63 ±2.7
73 ±6.0
68 ±5.0
67 ±5.0
65 ±3.7
60 ±5.4
10.8 ±1.0 9.7 ±0.5
9.4 ±0.5
8.8 ±0.4
8.1 ±0.4
6.6 ±0.5
6.0 ±0.5
5.1 ±0.4
4.8 ±0.3
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 23
> 25
> 25
> 25
> 22
> 25
> 25
> 26
> 25
Cross polar ratio (dB)
> 22
> 22
> 22
> 22
> 19
> 20
> 20
> 20
> 18
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1695 - 2690 (Cy2)
Frequency range (MHz)
Polarization
+45° , -45°
Electrical downtilt (°)
Gain (dBi)
1695 – 2690 (Ly1)
1695 - 19901920 - 22002200 - 24902490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
17.2
17.5
18.0
18.1
17.4
17.7
18.0
18.4
17.0 ±0.5
17.3 ±0.5
17.8 ±0.4
18.0 ±0.6
17.2 ±0.5
17.5 ±0.5
17.8 ±0.4
18.1±0.5
> 17
> 17
> 17
> 16
> 17
> 17
> 17
> 16
Horizontal 3dB beam width (°)
67 ±5.0
65 ±3.5
60 ±5.0
59 ±5.5
67 ±5.2
65 ±4.6
62.0±3.0
59 ±4.4
Vertical 3dB beam width (°)
6.6 ±0.5
6.0 ±0.5
5.2 ±0.4
5.0 ±0.4
6.6 ±0.5
6.0 ±0.4
5.2 ±0.4
5.0 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 27
> 28
> 26
> 26
> 25
> 25
> 26
> 25
Cross polar ratio (dB)
> 20
> 20
> 17
> 20
> 20
> 20
> 20
> 20
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
50
50
DC Ground
DC Ground
Impedance (Ω)
Grounding
* Max. effective power whole antenna: 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
79
Product
List
Product
Category
AQU4518R22v07
DXXXX-690-960/1427-2690/1695-2690/1695-2690-65/65/65/6516i/17.5i/18i/18i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.0m
Mechanical Properties
1999 x 369 x 149
Packing dimensions (H x W x D) (mm)
2265 x 435 x 240
Antenna weight (kg)
(535)
68
Antenna dimensions (H x W x D) (mm)
30.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
46.9 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1404
1999
Mast diameter supported (mm)
-40 .. +65
Frontal:
580 (at 150 km/h)
Lateral:
195 (at 150 km/h)
Maximum: 700 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 4.3-10 Female
Bottom
60
Connector position
Accessories
Unit: mm
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0 - 12 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 960 MHz(r1)
1427 - 2690 MHz(Ry3)
1695 - 2690 MHz(Cy2)
1695 - 2690 MHz(Ly1)
80
Product
List
Product
Category
AQU4518R22v07
DXXXX-690-960/1427-2690/1695-2690/1695-2690-65/65/65/6516i/17.5i/18i/18i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Ly1
HWxxxx……...r1
HWxxxx……Cy2
y1
HWxxxx……Ry3
r - Red
C - Center array
81
y2
y3
r1
y - Yellow
L - Left array
Product
List
R - Right array
Product
Category
AQU4518R14v07
DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/6515i/17.5i/17.5i/17.5i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
690 - 803
Polarization
1710 - 2690 (Ry3)
880 - 960 1710 - 19901920 - 22002200 - 24902490 - 2690
+45° , -45°
Electrical downtilt (°)
Gain (dBi)
824 - 894
790 - 862
+45° , -45°
0 - 14 , continuously adjustable
at mid Tilt
14.1
14.6
14.8
17.3
17.6
18.0
18.1
14.5 ±0.5
14.6 ±0.5
14.7 ±0.5
17.1 ±0.5
17.4 ±0.5
17.7 ±0.4
17.8 ±0.5
> 16
> 17
> 17
> 17
> 16
> 16
> 16
> 16
66 ±1.1
67 ±0.8
65 ±1.4
63 ±3
66 ±5.1
64 ±5.3
60 ±4.5
59 ±4.7
15.3 ±1.0
13.7 ±1.0
13.0 ±0.7
12.0 ±0.8
6.9 ±0.6
6.2 ±0.5
5.4 ±0.4
5.1 ±0.4
over all Tilts 14.1 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12 , continuously adjustable
14.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 24
> 25
> 25
> 24
> 25
> 25
> 28
> 26
Cross polar ratio (dB)
> 21
> 20
> 20
> 20
> 20
> 20
> 18
> 17
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1710 - 2690 (Cy2)
Frequency range (MHz)
1710 - 2690 (Ly1)
1710 - 19901920 - 22002200 - 24902490 - 26901710 - 19901920 - 22002200 - 24902490 - 2690
Polarization
+45° , -45°
Electrical downtilt (°)
2 - 12 , continuously adjustable
at mid Tilt
Gain (dBi)
over all
Tilts
Side lobe suppression for first
side lobe above main beam (dB)
2 - 12 , continuously adjustable
17.2
17.5
17.8
18.0
17.4
17.7
18.0
18.2
17.0 ±0.5
17.3 ±0.5
17.6 ±0.4
17.7 ±0.5
17.2 ±0.5
17.5 ±0.5
17.8 ±0.4
18.0 ±0.5
> 16
> 16
> 16
> 16
> 17
> 17
> 17
> 16
Horizontal 3dB beam width (°)
64 ±6.3
63 ±6.7
60 ±6.1
59 ±4.0
67 ±5.3
65 ±4.8
61 ±3.5
60 ±2.9
Vertical 3dB beam width (°)
6.9 ±0.5
6.2 ±0.5
5.4 ±0.4
5.1 ±0.3
6.9 ±0.6
6.2 ±0.5
5.4 ±0.5
5.1 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 25
> 25
> 28
> 26
> 25
> 26
> 28
> 27
Cross polar ratio (dB)
> 20
> 20
> 18
> 17
> 22
> 22
> 19
> 22
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
50
50
DC Ground
DC Ground
Impedance (Ω)
Grounding
* Max. effective power whole antenna: 700 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
82
Product
List
Product
Category
AQU4518R14v07
DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/6515i/17.5i/17.5i/17.5i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna dimensions (H x W x D) (mm)
1499 x 369 x 149
Packing dimensions (H x W x D) (mm)
1870 x 455 x 205
Antenna weight (kg)
23.5
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(58)
Mechanical Properties
34.1 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1381
1499
Mast diameter supported (mm)
Frontal:
425 (at 150 km/h)
Lateral:
140 (at 150 km/h)
Maximum: 510 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
8 x 4.3-10 Female
Connector position
60
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0 - 16 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 960 MHz(r1)
1710 - 2690 MHz(Ry3)
1710 - 2690 MHz(Cy2)
1710 - 2690 MHz(Ly1)
83
Product
List
Product
Category
AQU4518R14v07
DXXXX-690-960/1710-2690/1710-2690/1710-2690-65/65/65/6515i/17.5i/17.5i/17.5i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.6 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
Integrated RET S/N:
c
a HWxxxx……L y1
b HWxxxx……...r1
c HWxxxx……Cy2
a
d
d HWxxxx……Ry3
y1
r - Red
L - Left array
R - Right array
84
y - Yellow
C - Center array
Product
List
y2
y3
r1
Product
Category
AQU4518R11v07
DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/6516i/18i/18i/18i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
824 - 894
1695 - 2690 (Ry3)
880 - 960 1695 - 19901920 - 22002200 - 24902490 - 2690
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable
2 - 12 , continuously adjustable
15.4
15.8
15.9
16.2
17.4
17.8
18.0
18.4
15.3 ±0.5
15.7 ±0.5
15.8 ±0.5
16.1 ±0.5
17.3 ±0.5
17.7 ±0.5
17.8 ±0.4
18.0 ±0.5
> 16
> 17
> 17
> 17
> 17
> 17
> 17
> 16
68 ±3.0
65 ±2.5
66 ±3.5
63 ±3.7
68 ±4.5
66 ±4.9
62 ±3.7
60 ±4.8
10.8 ±1.0
9.5 ±0.5
9.2 ±0.4
8.5 ±0.5
6.7 ±0.5
5.9 ±0.5
5.3 ±0.5
4.8 ±0.3
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 25
> 25
> 25
> 25
> 25
> 25
> 26
> 25
Cross polar ratio (dB)
> 22
> 22
> 22
> 22
> 22
> 21
> 20
> 18
0°
Max. effective power per port
(W)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Intermodulation IM3 (dBc)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1695 – 2690 (Cy2)
Frequency range (MHz)
1695 - 19901920 - 22002200 - 24902490 - 26901695 - 19901920 - 22002200 - 24902490 - 2690
Polarization
+45° , -45°
Electrical downtilt (°)
Gain (dBi)
1695 - 2690 (Ly1)
+45° , -45°
2 - 12 , continuously adjustable
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
2 - 12 , continuously adjustable
17.1
17.6
17.7
18.1
17.4
17.8
18.0
18.4
17.0 ±0.5
17.4 ±0.5
17.6 ±0.4
17.9 ±0.5
17.2 ±0.5
17.7 ±0.5
17.8 ±0.4
18.3 ±0.5
> 17
> 16
> 16
> 16
> 17
> 17
> 17
> 16
Horizontal 3dB beam width (°)
67 ±4.8
65 ±4.8
60 ±5.0
57 ±4.5
68 ±5.2
66 ±4.6
61.0 ±5.2
60 ±4.4
Vertical 3dB beam width (°)
6.5 ±0.5
5.8 ±0.5
5.4 ±0.4
4.8 ±0.4
6.7 ±0.5
5.9 ±0.4
5.3 ±0.4
4.8 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 27
> 28
> 26
> 26
> 24
> 25
> 26
> 26
Cross polar ratio (dB)
> 21
> 20
> 17
> 22
> 22
> 22
> 22
> 22
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
50
50
DC Ground
DC Ground
* Max. effective power whole antenna: 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
85
Product
List
Product
Category
AQU4518R11v07
DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/6516i/18i/18i/18i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.0m
Mechanical Properties
1999 x 369 x 149
Packing dimensions (H x W x D) (mm)
2365 x 455 x 195
Antenna weight (kg)
28.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(535)
Antenna dimensions (H x W x D) (mm)
39.6 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1404
1999
Mast diameter supported (mm)
-40 .. +65
Frontal:
580 (at 150 km/h)
Lateral:
195 (at 150 km/h)
Maximum: 700 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 4.3-10 Female
Bottom
60
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0 - 12 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 960 MHz(r1)
1695 - 2690 MHz(Ry3)
1695 - 2690 MHz(Cy2)
1695 - 2690 MHz(Ly1)
86
Product
List
Product
Category
AQU4518R11v07
DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/6516i/18i/18i/18i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.6 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
c
Integrated RET S/N:
a HWxxxx……Ly1
b HWxxxx……...r1
a
d
c HWxxxx……Cy2
r - Red
C - Center array
87
y1
d HWxxxx……Ry3
y2
y3
r1
y - Yellow
L - Left array
R - Right array
Product
List
Product
Category
AQU4518R9v06
DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/6517i/18i/18i/17.5i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
690 - 803
790 - 862
3 x (1695 - 2690) (Ly1/RTy2/RBy3)
824 - 894
880 - 960
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately
at mid Tilt
over all Tilts
Gain (dBi)
1920 - 2200
16.2
16.5
16.7
17.0
16.1 ±0.5
16.3 ±0.4
16.5 ±0.4
16.8 ±0.4
at mid Tilt
Bottom
over all Tilts
at mid Tilt
Top
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
> 17
> 18
> 17
> 17
17.1
17.3
17.1
17.6
16.9 ±0.5
17.1 ±0.3
17.0 ±0.4
17.4 ±0.5
16.8
17.1
16.8
17.3
16.7 ±0.5
17.0 ±0.4
16.7 ±0.4
17.1 ±0.5
> 17
> 17
>17
> 16
Horizontal 3dB beam width (°)
67 ±1.9
66 ±3.5
65 ±2.4
62 ±3.3
63 ±3.4
62 ±2.8
61 ±3.7
60 ±3.1
Vertical 3dB beam width (°)
8.8 ±0.6
8.5 ±0.4
8.0 ±0.3
7.4 ±0.3
7.4 ±0.5
6.8 ±0.5
6.0 ±0.4
5.5 ±0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 30
Front to back ratio, ±30° (dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
> 25
> 25
> 25
> 25
> 24
> 24
> 25
> 25
> 20
> 20
> 20
> 20
> 17
> 17
> 17
> 17
500 (at 50℃ ambient temperature)
Max. effective power whole antenna
(W)
250 (at 50℃ ambient temperature)
960 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
Antenna dimensions (H x W x D) (mm)
2528 x 349 x 166
Packing dimensions (H x W x D) (mm)
2890 x 435 x 210
Antenna weight (kg)
28.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
(591)
Mechanical Properties
39.3 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
1885
2528
Frontal: 825 (at 150 km/h)
Lateral: 240 (at 150 km/h)
Maximum: 870 (at 150 km/h)
Wind load (N)
200
Survival wind speed (km/h)
250
Connector
8 x 4.3-10 Female
Connector position
Bottom
Accessories
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
52
Item
88
Product
List
Product
Category
AQU4518R9v06
DXXXX-690-960/1695-2690/1695-2690/1695-2690-65/65/65/6517i/18i/18i/17.5i-M/M/M/M-R
EasyRET 1L3H 8-Port Antenna with 4 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.6 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
Integrated RET S/N:
c
a HWxxxx……….Ly1
y2
b HWxxxx……..RTy2
c HWxxxx……..RBy3
a
d
d HWxxxx..………..r1
r - Red
L - Left array
T - Top array
y1
r1
y3
y - Yellow
R - Right array
B - Bottom array
Pattern sample for reference
690 - 960 MHz
1695 - 2690 MHz
(r1)
(Ly1/RTy2/RBy3)
89
Product
List
Product
Category
APE4518R37v06
DXXXXX-690-960/1427-2690/1695-2200/2490-2690/1695-269065/65/65/65/65-15i/17.5i/17i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization
1695 1990
1920 2200
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2490 2690
2 - 12 , continuously adjustable
0 - 14, continuously adjustable
at mid Tilt
2200 2490
+45° , -45°
+45° , -45°
Electrical downtilt (°)
Gain (dBi)
1427 - 2690 (Ry3)
1427 1518
14.0
14.4
14.6
14.0 ±0.4
14.4 ±0.5
14.6 ±0.5
> 17
> 17
> 16
15.8
14.9
17.3
17.4
17.6
17.9
14.8 ±0.4 15.7 ±0.5 17.1 ±0.5 17.2 ±0.5 17.4 ±0.4 17.7 ±0.5
> 16
> 15
> 17
> 17
> 16
> 16
67 ±2.0
66 ±3.0
64 ±3.0
61 ±4.0
74 ±6.0
69 ±5.0
68 ±5.5
64 ±5.0
60 ±4.0
15.3 ±2.0
13.6 ±2.0
13.2 ±0.7
12.2 ±0.8
8.0 ±0.4
6.5 ±0.6
5.9 ±0.5
5.1 ±0.4
4.8 ±0.4
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 23
> 24
> 24
> 22
> 24
> 24
> 26
> 24
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
> 18
> 20
> 20
> 20
> 17
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
50
50
DC Ground
DC Ground
Intermodulation IM3 (dBc)
Impedance (Ω)
Grounding
Electrical Properties
1695 - 2200 (b1)
Frequency range (MHz)
1695 1990
1920 2200
Polarization
1695 1990
1920 2200
2200 - 2490 2490 - 2690
+45° , -45°
Electrical downtilt (°)
Gain (dBi)
1695 - 2690 (Cy2)
2490 - 2690
(Ly1)
2 - 12 , continuously adjustable , each band separately
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
16.9
17.5
18.0
17.3
17.5
17.8
17.9
16.7 ±0.5
17.2 ±0.5
17.7 ±0.5
17.1 ±0.5
17.3 ±0.5
17.6 ±0.4
17.7 ±0.5
> 16
> 17
> 16
> 16
> 16
> 16
> 17
Horizontal 3dB beam width (°)
69 ±5.0
66 ±5.0
58 ±5.0
63 ±5.0
62 ±6.0
58 ±5.3
58 ±5.1
Vertical 3dB beam width (°)
6.4 ±0.5
5.8 ±0.5
4.6 ±0.3
6.5 ±0.6
5.8 ±0.5
5.1 ±0.4
4.8 ±0.3
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio, ±30°(dB)
> 23
> 26
> 24
> 27
> 28
> 28
> 26
Cross polar ratio (dB)
> 22
> 21
> 20
> 22
> 19
> 17
> 21
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
90
Product
List
Product
Category
APE4518R37v06
DXXXXX-690-960/1427-2690/1695-2200/2490-2690/1695-269065/65/65/65/65-15i/17.5i/17i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 1.4m
Antenna dimensions (H x W x D) (mm)
1499 x 369 x 149
Packing dimensions (H x W x D) (mm)
1790 x 435 x 240
Antenna weight (kg)
26.3
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(58)
Mechanical Properties
39 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
138
1
1499
Operational temperature (℃)
Frontal:
425 (at 150 km/h)
Lateral:
140 (at 150 km/h)
Maximum: 510 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
10 x 4.3-10 Female
Connector position
60
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0 - 16 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 960 MHz
(r1)
1427 - 2690 MHz
(Ry3)
2490 - 2690 MHz
(Ly1)
1695 - 2200 MHz
(b1)
1695 - 2690 MHz
(Cy2)
91
Product
List
Product
Category
APE4518R37v06
DXXXXX-690-960/1427-2690/1695-2200/2490-2690/1695-269065/65/65/65/65-15i/17.5i/17i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)s)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Ly1
y1
HWxxxx……..b1
HWxxxx……..r1
HWxxxx……Cy2
HWxxxx……Ry3
b1
y2
y3
r1
r - Red
C - Center array
92
y - Yellow
L - Left array
Product
List
b - Blue
R - Right array
Product
Category
APE4518R19v06
DXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-269065/65/65/65/65-16i/17.5i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (1695 - 2200)
(Lb1/Rb2)
690 – 960 (r)
Frequency range (MHz)
690 - 803
824 - 894
790 - 862
1695 1920
880 - 960
Polarization
1920 2200
2 x (2490 - 2690)
(Ly1/Ry2)
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately
at mid Tilt
15.4
15.7
16.0
16.1
17.0
17.3
18.0
15.3 ±0.5
15.6 ±0.5
15.8 ±0.5
16.0 ±0.5
16.9 ±0.4
17.2 ±0.4
17.9 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 17
> 17
> 17
> 17
> 17
> 17
> 16
Horizontal 3dB beam width (°)
67 ±2
67 ±3
66 ±3
64 ±4
63 ±4
61 ±4
60 ±5
10.3 ±0.7
9.5 ±0.5
9.2 ±0.6
8.6 ±0.5
6.4 ±0.7
5.8 ±0.4
4.9 ±0.4
Gain (dBi)
over all Tilts
Vertical 3dB beam width (°)
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 30
≥ 30
≥ 30
Front to back ratio , ±30° (dB)
> 23
> 24
> 24
> 24
> 25
> 26
> 24
Cross polar ratio (dB)
> 18
> 18
> 18
> 17
> 18
> 18
> 18
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Max. effective power whole
antenna (W)
1000 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
1999 x 349 x 166
Packing dimensions (H x W x D) (mm)
2235 x 435 x 215
Antenna weight (kg)
26.5
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(637)
Antenna dimensions (H x W x D) (mm)
37.1 (included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
1310
1999
Operational temperature (℃)
Frontal:
630 (at 150 km/h)
Lateral:
180 (at 150 km/h)
Maximum: 665 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
10 x 4.3-10 Female
Connector position
Bottom
Item
Model
Downtilt kit ASMDT0D01
Description
Weight
Units per antenna
Mechanical downtilt:
0 - 12 °
2.1 kg
1 (Separate packing)
93
52
Accessories
Product
List
Product
Category
APE4518R19v06
DXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-269065/65/65/65/65-16i/17.5i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Lb1
y1
HWxxxx……Ly1
y2
HWxxxx……Ry2
HWxxxx……Rb2
b1
HWxxxx……...r1
r - Red
L - Left array
y - Yellow
R - Right array
b - Blue
b2
r1
Pattern sample for reference
690 - 960 MHz
(r)
1695 - 2200 MHz
(Lb1/Rb2)
94
2490 - 2690 MHz
Ly1/Ry2)
Product
List
Product
Category
APE4516R1v06
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-16i/16.5i/16.5i/16i/16i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 – 960 (r1)
Frequency range (MHz)
690 - 803
790 - 862
4 x (1695 - 2690) (LBy1/LTy2/RTy3/RBy4)
824 - 894
880 - 960
1695 - 1990
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
at mid Tilt
over all Tilts
2 - 12 , continuously adjustable , each band separately
15.4
15.7
16.0
16.1
15.3±0.5
15.6 ±0.5
15.8 ±0.5
16.0 ±0.5
at mid Tilt
Gain (dBi) Bottom
over all Tilts
15.8
16.2
16.5
16.7
15.8 ±0.5
16.2 ±0.5
16.5 ±0.4
16.6 ±0.6
at mid Tilt
Top
15.4
15.8
15.9
16.2
15.3 ±0.5
15.7 ±0.5
15.8 ±0.5
16.0 ±0.6
> 17
> 17
> 17
> 17
> 17
63 ±4.0
61 ±4.0
60 ±4.0
61 ±5.0
Bottom
10.3 ±0.7
9.4 ±0.6
8.1 ±0.5
7.5 ±0.5
Top
9.9 ±0.8
8.9 ±0.6
7.8 ±0.3
7.1 ±0.5
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
> 17
Horizontal 3dB beam width (°)
Vertical 3dB beam
width (°)
> 17
> 17
67 ±3.0
67 ±3.0
66 ±3.0
64 ±4.0
10.3 ±0.7
9.3 ±0.5
9.1 ±0.6
8.4 ±0.6
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 30
≥ 30
Front to back ratio, ±30° (dB)
> 25
> 24
> 24
> 24
> 24
> 26
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 17
> 18
> 18
> 18
> 20
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)
Max. effective power whole antenna
(W)
250 (at 50℃ ambient temperature)
1000 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1999 x 349 x 166
Packing dimensions (H x W x D) (mm)
2235 x 435 x 215
Antenna weight (kg)
68
26.5
4.2 (2 units)
Antenna packing weight (kg)
(637)
Clamps weight (kg)
37.1 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
1310
Frontal:
630 (at 150 km/h)
Lateral:
180 (at 150 km/h)
Maximum: 665 (at 150 km/h)
200
Survival wind speed (km/h)
1999
Operational temperature (℃)
250
Connector
10 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0 - 12 °
2.1 kg
1 (Separate packing)
95
52
Accessories
Product
List
Product
Category
APE4516R1v06
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-16i/16.5i/16.5i/16i/16i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx…….LBy1
HWxxxx…….LTy2
y2
y3
HWxxxx……RTy3
HWxxxx..….RBy4
HWxxxx……….r1
Pattern sample for reference
r - Red
y – Yellow
R - Right array T - Top array
y1
r1
y4
L - Left array
B - Bottom array
1695 - 2690 MHz
(LBy1/LTy2/RTy3/RBy4)
690 - 960 MHz
(r1)
96
Product
List
Product
Category
APE4517R0v06
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 – 960 (r1)
Frequency range (MHz)
690 - 803
790 - 862
4 x (1695 - 2690) (LBy1/LTy2/RTy3/RBy4)
824 - 894
880 - 960
1695 - 1990
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately
at mid Tilt
over all Tilts
16.2
16.5
16.7
17.0
16.1 ±0.5
16.3 ±0.4
16.5 ±0.4
16.8 ±0.4
at mid Tilt
Gain (dBi) Bottom
over all Tilts
17.1
17.3
17.1
17.6
16.9 ±0.5
17.1±0.3
17.0 ±0.4
17.4 ±0.5
at mid Tilt
Top
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
> 17
> 17
> 17
> 17
16.8
17.1
16.8
17.3
16.7 ±0.5
17.0 ±0.4
16.7 ±0.4
17.1 ±0.5
> 17
> 17
> 17
> 16
Horizontal 3dB beam width (°)
67 ±1.9
66 ±3.5
65 ±2.4
62 ±3.3
63 ±3.4
62 ±2.8
61 ±3.7
60 ±3.1
Vertical 3dB beam width (°)
8.8 ±0.6
8.5 ±0.4
8.0 ±0.3
7.4 ±0.3
7.4 ±0.5
6.8 ±0.5
6.0 ±0.4
5.5 ±0.2
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 30
Front to back ratio, ±30° (dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
≥ 30
> 25
> 25
> 25
> 25
> 24
> 24
> 25
> 25
> 20
> 20
> 20
> 20
> 17
> 17
> 17
> 17
500 (at 50℃ ambient temperature)
Max. effective power whole antenna
(W)
250 (at 50℃ ambient temperature)
1000 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
2528 x 349 x 166
Packing dimensions (H x W x D) (mm)
2880 x 415 x 245
Antenna weight (kg)
32.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
(591)
68
Antenna dimensions (H x W x D) (mm)
48.1 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
1885
2528
Operational temperature (℃)
Frontal:
825 (at 150 km/h)
Lateral:
240 (at 150 km/h)
Maximum: 870 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
10 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
97
52
Accessories
Product
List
Product
Category
APE4517R0v06
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx…….LBy1
HWxxxx…….LTy2
y2
y3
HWxxxx……RTy3
HWxxxx..….RBy4
y1
HWxxxx……….r1
r - Red
y – Yellow
R - Right array T - Top array
y4
r1
L - Left array
B - Bottom array
Pattern sample for reference
1695 - 2690 MHz
(LBy1/LTy2/RTy3/RBy4)
690 - 960 MHz
(r1)
98
Product
List
Product
Category
ASI4518R30v06
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 – 960 (r1)
Frequency range (MHz)
690 803
790 862
Polarization
1427 – 2690 (RBy4)
824 894
880 960
1427 1518
1695 1990
+45° , -45°
Electrical downtilt (°)
2200 2490
2490 2690
+45° , -45°
2 - 12, continuously adjustable , each band separately
at mid Tilt
Gain (dBi)
1920 2200
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
16.2
16.6
16.8
>17
>16
15.9
17.3
17.5
17.8
18.1
15.8 ±0.5
17.1 ±0.5
17.2 ±0.5
17.5 ±0.4
17.6 ±0.5
> 15
> 17
> 17
> 15
> 16
17.0
16.1 ±0.5 16.5 ±0.5 16.7 ±0.5 16.9 ±0.5
>16
>16
Horizontal 3dB beam width (°)
67 ±2.5
65 ±2.6
63 ±2.1
61 ±1.6
73 ±6.0
69 ±4.5
68 ±4.7
63 ±4.7
58 ±4.0
Vertical 3dB beam width (°)
8.9 ±0.8
7.9 ±0.4
7.7 ±0.3
7.2 ±0.3
8.0 ±0.4
6.5 ±0.6
5.9 ±0.5
5.1 ±0.4
4.8 ±0.4
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30°(dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
> 24
> 26
> 26
> 26
> 22
> 18
> 18
> 20
> 20
> 18
500 (at 50℃ ambient temperature)*
≥ 28
> 23
> 23
> 27
> 24
> 22
> 22
> 20
> 17
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
4 x (1695 - 2690) (LBy1/LTy2/CBy3/RTy5)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
Electrical downtilt (°)
Bottom
Gain (dBi)
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
at mid Tilt
over all Tilts
17.5
18.1
18.2
17.1 ±0.5
17.3 ±0.5
17.9 ±0.4
18.0 ±0.5
16.8
17.1
17.6
18.0
16.5 ±0.5
16.9 ±0.5
17.4 ±0.4
17.7 ±0.5
> 17
> 17
> 17
> 17
Horizontal 3dB beam width (°)
67 ±4.7
65 ±4.9
60 ±4.8
58 ±5.0
Vertical 3dB beam width (°)
6.6 ±0.7
6.0 ±0.7
5.2 ±0.5
4.8 ±0.4
Top
at mid Tilt
17.3
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio, ±30°(dB)
Cross polar ratio (dB)
0°
> 25
> 27
> 27
> 26
> 22
> 20
> 19
> 22
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
99
Product
List
Product
Category
ASI4518R30v06
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 2.6m
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2769 x 369 x 149
Packing dimensions (H x W x D) (mm)
2965 x 435 x 240
41.5
Clamps weight (kg)
(808)
Antenna weight (kg)
68
6.3 (2 units)
Antenna packing weight (kg)
62.8 (Included clamps)
Mast diameter supported (mm)
50 - 115
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1901
2769
Radome material
Frontal:
845 (at 150 km/h)
Lateral:
280 (at 150 km/h)
Maximum: 1015 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
12 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8 °
3.1 kg
1 (Separate packing)
60
Accessories
Pattern sample for reference
690 - 960 MHz
(r1)
1427 - 2690 MHz
(RBy4)
1695 - 2690 MHz
(LBy1/CBy3)
1695 - 2690 MHz
(LTy2/RTy5)
100
Product
List
Product
Category
ASI4518R30v06
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 1L4H 10-Port Antenna with 5 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……LTy2
HWxxxx……LBy1
y5
y2
HWxxxx……CBy3
HWxxxx……RBy4
HWxxxx……RTy5
HWxxxx…….....r1
r - Red
C - Center array
T - Top array
101
y - Yellow
L - Left array
B - Bottom array
Product
List
y1
y3
y4
r1
R - Right array
Product
Category
B. Passive Antenna
Multi-band
B - 4 2LnH
6 Ports - 2L1H
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
690-960/
690-960/
1695-2690
65/65/65
14.5/
14.5/
18
0-14/0-14/
2-12
EasyRET2.0
6 x 4.3-10
1499 x 429 x 196
ATR4518R24v06
108
690-960/
690-960/
1695-2690
65/65/65
16/
16/
18
0-10/0-10/
2-12
EasyRET2.0
6 x 4.3-10
1999 x 429 x 196
ATR4518R25v06
110
690-960/
690-960/
1695-2690
65/65/65
17/
17/
18
0-10/0-10/
2-12
EasyRET2.0
6 x 4.3-10
2550 x 429 x 196
ATR4518R26v06
112
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
8 Ports - 2L2H
690-960/
690-960/
1427-2690/
1427-2690
690-960/
690-960/
1427-2690/
1427-2690
690-960/
690-960/
1427-2690/
1427-2690
65/65/65/65
65/65/65/65
65/65/65/65
14.5/
14.5/
17.5/
17.5
16/
16/
17.5/
17.5
14/
14/
18.5/
18.5
2-16/2-16/
2-12/2-12
EasyRET2.0
8 x 4.3-10
1509 x 449 x 196
AQU4518R37v06
114
0-10/0-10/
2-12/2-12
EasyRET2.0
8 x 4.3-10
2099 x 449 x 196
AQU4518R36v06
116
2-14/2-14/
2-12/2-12
EasyRET2.0
8 x 4.3-10
1509 x 369 x 226
AQU4518R60v06
118
EasyRET2.0
8 x 4.3-10
2099 x 369 x 226
AQU4518R61v06
120
690-960/
690-960/
1427-2690/
1427-2690
65/65/65/65
15/
15/
18.5/
18.5
690-960/
690-960/
1427-2690/
1427-2690
65/65/65/65
16/
16/
18.5/
18.5
2-12/2-12/
2-12/2-12
EasyRET2.0
8 x 4.3-10
2550 x 369 x 226
*AQU4518R63v06
122
65/65/65/65
14.5/
14.5/
18/
18
0-14/0-14/
2-12/2-12
EasyRET2.0
8 x 4.3-10
1499 x 429 x 196
AQU4518R23v18
124
690-960/
690-960/
1695-2690/
1695-2690
2-12/2-12/
2-12/2-12
**Preliminary Issue
102
Product
Category
Multi-band
B - 4 2LnH
8 Ports - 2L2H
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
65/65/65/65
16/
16/
18/
18
0-10/0-10/
2-12/2-12
EasyRET2.0
8 x 4.3-10
1999 x 429 x 196
AQU4518R24v18
126
690-960/
690-960/
1695-2690/
1695-2690
65/65/65/65
17/
17/
18/
18
0-10/0-10/
2-12/2-12
EasyRET2.0
8 x 4.3-10
2550 x 429 x 196
AQU4518R25v18
128
690-960/
690-960/
1695-2690/
1695-2690
65/65/65/65
17/
17/
21/
21
0-10/0-10/
1-7/1-7
EasyRET2.0
8 x 4.3-10
2550 x 429 x 196
AQU4521R2v06
130
65/65/65/65
15.5/
16/
18/
18
0-10/0-10/
0-10/0-10
EasyRET2.0
8 x 4.3-10
1999 x 349 x 166
AQU4518R30v07
132
690-862/
880-960/
1695-2690/
1695-2690
65/65/65/65
16.5/
17/
18/
18
0-10/0-10/
0-10/0-10
EasyRET2.0
8 x 4.3-10
2528 x 349 x 166
AQU4518R58v06
134
690-862/
880-960/
1710-2690/
1710-2690
65/65/65/65
14/
14.5/
17.5/
17.5
0-12/0-12/
0-10/0-10
EasyRET2.0
8 x 4.3-10
1499 x 359 x 178
AQU4517R4v06
136
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
690-960/
690-960/
1695-2690/
1695-2690
690-862/
880-960/
1695-2690/
1695-2690
10 Ports - 2L3H
690-960/
690-960/
1427-2690/
1695-2690/
1695-2690
690-960/
690-960/
1427-2200/
1695-2690/
1695-2690
690-960/
690-960/
1427-2690/
1695-2690/
1695-2690
65/65/65/
65/65
14.5/
14.5/
17.5/
18/
18
0-14/0-14/
2-12/2-12/
2-12
EasyRET2.0
10 x 4.3-10
1499 x 469 x 206
APE4518R13v06
138
65/65/65/
65/65
16/
16/
17.5/
18/
18
0-10/0-10/
2-12/2-12/
2-12
EasyRET2.0
10 x 4.3-10
1999 x 469 x 206
APE4518R14v06
141
65/65/65/
65/65
17/
17/
17.5/
18/
18
2-12/212/2-12/212/2-12
EasyRET2.0
10 x 4.3-10
2550 x 469 x 206
APE4518R30v06
144
103
Product
Category
Multi-band
B - 4 2LnH
12 Ports - 2L4H
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
2x617-894/
4x1695-2690
65/65/65/
65/65/65
2x15.5/
4x17.5/
2-14/2-14/
2-12/2-12/
2-12/2-12
EasyRET2.0
12 x 4.3-10
2099 x 499 x 206
ASI4516R0v07
147
2x690-960/
2x1427-2690/
2x1695-2690
65/65/65/
65/65/65
2x14.5/
2x17.5/
2x17.5
0-14/0-14/
2-12/2-12/
2-12/2-12
EasyRET2.0
12 x 4.3-10
1509 x 469 x 206
ASI4518R37v07
149
2x690-960/
2x1427-2690/
2x1695-2690
65/65/65/
65/65/65
2x15.5/
2x18/
2x18
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
12 x 4.3-10
2009 x 469 x 206
ASI4518R39v07
152
2x690-960/
2x1427-2690/
2x1695-2690
65/65/65/
65/65/65
2x17/
2x17.5/
2x17.5
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
12 x 4.3-10
2695 x 429 x 196
ASI4518R10v09
155
690-960/
690-960/
1427-2690/
1427-2690/
1695-2690/
1695-2690
65/65/65/
65/65/65
15/
15/
16.5/
16.5/
16.5/
16.5
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
12 x 4.3-10
2099 x 369 x 226
ASI4517R12v06
158
2x690-960/
2x1427-2690/
2x1695-2690
65/65/65/
65/65/65
2x16/
2x18/
2x18
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
12 x 4.3-10
2769 x 369 x226
ASI4518R57v06
161
104
Product
Category
Multi-band
B - 4 2L4H
12 Ports - 2L4H
Frequency
3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
2x690-960/
4x1695-2690
65/65/65/
65/65/65
2x16/
4x16.5
0-10/0-10/
2-12/2-12/
2-12/2-12
EasyRET2.0 12 x 4.3-10
1999 x 429 x 196
ASI4517R3v18
164
2x690-960/
4x1695-2690
65/65/65/
65/65/65
2x17/
4x17.5
0-10/0-10/
2-12/2-12/
2-12/2-12
EasyRET2.0 12 x 4.3-10
2769 x 429 x 196
ASI4518R10v18
166
2x690-960/
2x1695-2200/
2x2490-2690
65/65/65/
65/65/65
2x14.5/
2x17/
2x17.5
0-14/0-14/
2-12/2-12/
2-12/2-12
EasyRET2.0 12 x 4.3-10
1499 x 429 x 196
ASI4518R14v18
168
65/65/65/
65/65/65
16.5/
17/
17.5/
17.5/
17.5/
17.5
2-12/2-12/
2-12/2-12/
2-12/2-12/
EasyRET2.0 12 x 4.3-10
2769 x 369 x 149
ASI4518R33v06
170
65/65/65/
65/65/65
14/
14.5/
17.5/
17/
17.5/
17.5
2-16/2-16/
2-12/2-12/
2-12/2-12
EasyRET2.0 12 x 4.3-10
1499 x 369 x 149
ASI4518R41v06
173
65/65/65/
65/65/65
15/
15.5/
17.5/
17.5/
17/
17.5
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0 12 x 4.3-10
1999 x 369 x 149
ASI4518R32v06
176
690-862/
880-960/
1427-2690/
1695-2690/
1695-2690/
1695-2690
690-862/
880-960/
1427-2690/
1695-2200/
2490-2690/
1695-2690
690-862/
880-960/
1427-2690/
1695-2690/
1695-2200/
2490-2690
105
Product
Category
Multi-band
B - 4 2LnH
Frequency
3dB Horizontal
Electrical
Range (MHz)
Gain (dBi)
Tilt Method
Beam Width (o)
Downtilt (o)
158
Connector
Dimension(mm)
Model
Page
7 x 65
2x14.5/
2x15.5/
17/17/17.5
2-16/2-16/
2-12/2-12/
2-12/2-12/
2-12
EasyRET2.0
14 x 4.3-10
1509 x 469 x 206
AHP4517R12v06
179
2*690-960/
2*1427-1518
3*1695-2690
7 x 65
2x16/
2x15.5/
17/17/17.5
0-10/0-10/
2-12/2-12/
2-12/2-12/
2-12
EasyRET2.0
14 x 4.3-10
2099 x 449 x 196
AHP4517R7v06
182
690-960/
690-960/
1427-2690/
4*1695-2690
7 x 65
17/
17/
17.5/
4x17.5/
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12
EasyRET2.0
14 x 4.3-10
2769 x 469 x 206
AHP4518R5v06
185
7 x 65
14.5/
14.5/
17.5/
2x17/
2x17.5
0-14/0-14/
2-12/2-12/
2-12/2-12/
2-12
EasyRET2.0
14 x 4.3-10
1499 x 469 x 206
AHP4518R3v06
188
690-960/
690-960/
1427-2690/
2*1695-2200/
2*2490-2690
7 x 65
16/
16/
17.5/
2x17/
2x17.5
2-14/2-14/
2-12/2-12/
2-12/2-12/
2-12
EasyRET2.0
14 x 4.3-10
1999 x 469 x 206
AHP4518R4v07
192
690-862/
880-960/
1427-2690/
4*1695-2690
7 x 65
16.5/
17/
17.5/
4x17.5
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12
EasyRET2.0
14 x 4.3-10
2769 x 369 x 149
AHP4517R2v06
195
7 x 65
14/
14.5/
17.5/
2x17/
2x17.5
2-16/2-16/
2-12/2-12/
2-12/2-12/
2-12
EasyRET2.0
14 x 4.3-10
1499 x 369 x 149
AHP4517R1v06
198
7 x 65
15/
15.5/
17.5/
2x17/
2x17.5
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12
EasyRET2.0
14 x 4.3-10
1999 x 369 x 149
AHP4517R0v07
201
2*690-960/
2*1427-1518
3*1695-2690
690-960/
690-960/
1427-2690/
2*1695-2200/
2*2490-2690
690-862/
880-960/
1427-2690/
2*1695-2200/
2*2490-2690
690-862/
880-960/
1427-2690/
2*1695-2200/
2*2490-2690
106
Product
Category
2LnH Band
14 Ports - 2L5H
Multi-band
B - 4 2LnH
16 Ports - 2L6H
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
2*617-894/
2*1695-2200/
2*2490-2690/
2*1695-2690
8 x 65
15.5/15.5/
16/16/
17/17/
17.5/17.5
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
16 x 4.3-10
2099×499×206
AOC4518R11v06
204
2*690-960/
2*1427-2690/
4x1695-2690
8 x 65
2x15.5/
2x17/
4x17.5
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
16 x 4.3-10
2099 x 469 x 206
*AOC4518R21v06
207
8 x 65
2x16.5/
2x17/
4x17.5
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
16 x 4.3-10
2769 x 469 x 206
AOC4518R19v06
209
2*690-960/
2*1427-2690/
2*1695-2200/
2*2490-2690
8 x 65
2x14.5/
2x18/
2x17.5/
2x18
2-16/2-16/
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
16 x 4.3-10
1509 x 469 x 206
*AOC4518R07v07
213
2*690-960/
2*1427-2690/
2*1695-2200/
2*2490-2690
8 x 65
2x15.5/
2x17.5/
2x17.5/
2x18
2-14/2-14/
2-12/2-12/
2-11/2-11/
2-11/2-11
EasyRET2.0
16 x 4.3-10
2009 x 469 x 206
AOC4518R04v07
214
690-862/
880-960/
6*1695-2690
8 x 65
15/15.5/
16.5/16.5/
16.5/16/
16/16
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
16 x 4.3-10
1999 x 369 x 149
AOC4517R1v06
217
690-862/
880-960/
1427-2690/
5*1695-2690
8 x 65
16.5/17/
17.5/17.5/
17.5/17.5/
17.5/17.5
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
16 x 4.3-10
2769 x 369 x 149
AOC4518R3v06
221
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
2*690-960/
2*1427-2690/
2*1695-2690/
2*1427-2690/
2*1695-2690
2*690-960/
2*1427-2690/
4*1695-2690
20 Ports - 2L8H
2*690-960/
2*1427-2690/
2*1695-2690/
2*1427-2690/
2*1695-2690
10 x 65
2x15.5/
2x17.5/
2x17.5/
2x17/
2x17
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
20 x 4.3-10
2099 x 469 x 206
*A104518R05v06
224
10 x 65
16.5/16.5/
17.5/17.5/
17.5/17.5/
17/17/
17/17
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
20 x 4.3-10
2769 x 469 x 206
A104518R1v06
225
*Preliminary Issue
107
Product
Category
ATR4518R24v06
DXXX-690-960/690-960/1695-2690-65/65/65-14.5i/14.5i/18i-M/M/M-R
EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 862
1695 – 2690 (y1)
824 894
880 960
1695 1990
1920 2200
2200 2490
2490 2690
+45° , -45°
Polarization
0 - 14, continuously adjustable, each
band separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe
above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12, continuously adjustable
13.8
14.2
14.4
14.5
17.0
17.2
17.4
18.1
13.7 ±0.5
14.1±0.5
14.3 ±0.5
14.4 ±0.5
16.8 ±0.5
17.1 ±0.5
17.3 ±0.5
17.9 ±0.5
> 15
> 17
> 17
> 16
> 16
> 16
> 16
> 16
66 ±5
63 ±5
62 ±5
60 ±5
65 ±5
63 ±5
60 ±5
60 ±5
15 .3 ±1.2
14 ±1.1
6.8 ±0.7
5.8 ±0.5
5.3 ±0.4
5.0 ±0.5
13 .3 ±1.0 12.2 ±0.8
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
> 22
> 24
> 24
> 25
> 26
> 27
> 27
> 27
> 16
> 18
> 19
> 20
> 15
> 16
> 17
> 18
500 (at 50℃ ambient temperature)
Max. effective power whole antenna (W)
250 (at 50℃ ambient temperature)
720 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
1499 x 429 x 196
Packing dimensions (H x W x D) (mm)
1695 x 530 x 270
Antenna weight (kg)
25.5
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(66)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
37.5 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1499
50 - 115
1376
Mast diameter supported (mm)
Frontal:
410 (at 150 km/h)
Lateral:
245 (at 150 km/h)
Maximum: 540 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
6 x 4.3-10 Female
Connector position
57
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
108
Product
List
Product
Category
ATR4518R24v06
DXXX-690-960/690-960/1695-2690-65/65/65-14.5i/14.5i/18i-M/M/M-R
EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
2LnH Band
Properties
RET type
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
Integrated RET S/N:
a HWxxxx…….y1
b HWxxxx……Lr 1
c
a
c HWxxxx…...Rr 2
r - Red
y - Yellow
L - Left array R - Right array
y1
r1
r2
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(y1)
109
Product
List
Product
Category
ATR4518R25v06
DXXX-690-960/690-960/1695-2690-65/65/65-16i/16i/18i-M/M/M-R
EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803 790 - 862
824 - 894
1695 – 2690 (y1)
1695 1990
880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
0 - 10 , continuously adjustable , each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
15.0
15.5
15.8
16.0
17.0
17.2
14.7 ±0.5
15.3 ±0.5
15.6 ±0.5
15.8 ±0.5
16.8 ±0.5
17.1 ±0.5
> 16
> 17
> 17
> 17
> 16
> 16
> 16
> 16
68 ±5
65 ±5
62 ±5
60 ±5
65 ±5
63 ±5
61 ±5
60 ±5
10.5 ±0.9
9.5 ±0.8
9.2 ±0.7
8.5 ±0.7
6.8 ±0.7
5.8 ±0.5
5.3 ±0.4
5.0 ±0.5
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12, continuously adjustable
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
17.7
18.1
17.5 ±0.5 17.9 ±0.5
≥ 28
Front to back ratio , ±30° (dB)
> 23
> 25
> 26
> 26
> 26
> 27
> 27
> 28
Cross polar ratio (dB)
> 17
> 18
> 19
> 20
> 15
> 16
> 17
> 17
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)
Max. effective power whole antenna
250 (at 50℃ ambient temperature)
720 (at 50℃ ambient temperature)
(W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1999 x 429 x 196
Packing dimensions (H x W x D) (mm)
2195 x 530 x 270
Antenna weight (kg)
68
30.5
4.2 (2 units)
Antenna packing weight (kg)
(669)
Clamps weight (kg)
44.8 (Included clamps)
Mast diameter supported (mm)
50 - 115
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1273
1999
Radome material
Frontal:
555 (at 150 km/h)
Lateral:
340 (at 150 km/h)
Maximum: 735 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
6 x 4.3-10 Female
Bottom
57
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
110
Product
List
Product
Category
ATR4518R25v06
DXXX-690-960/690-960/1695-2690-65/65/65-16i/16i/18i-M/M/M-R
EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
2LnH Band
Properties
RET type
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
Integrated RET S/N:
a HWxxxx…….y1
b HWxxxx……Lr 1
c HWxxxx…...Rr 2
c
a
r - Red
y - Yellow
L - Left array R - Right array
y1
r1
r2
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(y1)
111
Product
List
Product
Category
ATR4518R26v06
DXXX-690-960/690-960/1695-2690-65/65/65-17i/17i/18i-M/M/M-R
EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
1695 – 2690 (y1)
1695 1990
824 - 894 880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
0 - 10 , continuously adjustable, each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
2 - 12, continuously adjustable
15.8
16.4
16.7
17
17.0
17.2
15.5 ±0.5
16.3 ±0.5
16.5 ±0.5
16.7 ±0.5
16.8 ±0.5
17.1 ±0.5
> 16
> 17
> 17
> 17
> 16
> 17
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
17.7
18.1
17.5 ±0.5 17.9 ±0.5
> 17
> 16
68 ±5
63 ±5
62 ±5
60 ±5
65 ±5
63 ±5
61 ±5
60 ±5
8.8 ±0.7
8.0 ±0.6
7.8 ±0.5
7.5 ±0.5
6.8 ±0.7
5.8 ±0.5
5.3 ±0.4
5.0 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 23
> 25
> 26
> 26
> 25
> 26
> 27
> 28
Cross polar ratio (dB)
> 17
> 18
> 19
> 20
> 15
> 16
> 17
> 17
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
Antenna dimensions (H x W x D) (mm)
2550 x 429 x 196
Packing dimensions (H x W x D) (mm)
2770 x 530 x 275
Antenna weight (kg)
36.5
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(706)
Mechanical Properties
58.5 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2550
50 - 115
1787
Mast diameter supported (mm)
Frontal:
735 (at 150 km/h)
Lateral:
450 (at 150 km/h)
Maximum: 965 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
6 x 4.3-10 Female
Bottom
57
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8 °
3.1 kg
1 (Separate packing)
112
Product
List
Product
Category
ATR4518R26v06
DXXX-690-960/690-960/1695-2690-65/65/65-17i/17i/18i-M/M/M-R
EasyRET 2L1H 6-Port Antenna with 3 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
Integrated RET S/N:
a HWxxxx…….y1
b HWxxxx……Lr1
a
c
c HWxxxx…...Rr2
r - Red
L - Left array
y - Yellow
R - Right array
y1
r1
r2
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(y1)
113
Product
List
Product
Category
AQU4518R37v06
DXXXX-690-960/690-960/1427-2690/1427-2690-65/65/65/6514.5i/14.5i/17.5i/17.5i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.5m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
824 - 894 880 - 960
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
1920 2200
2200 2490
2490 2690
+45° , -45°
+45° , -45°
2 - 12, continuously adjustable, each band separately
14.1
14.2
15.6
16.8
17.1
17.2
17.5
15.5
±0.6
16.7 ±0.5
17.0 ±0.5
17.1 ±0.5
17.4 ±0.5
14.3
13.6 ±0.5 14.0 ±0.5 14.1 ±0.5 14.2 ±0.5
Side lobe suppression for first side lobe
above main beam (dB)
1695 1990
2 - 16 , continuously adjustable, each band
separately
13.7
over all Tilts
2 x (1427 - 2690) (Ly1/Ry2)
1427 1518
> 15
> 16
> 16
> 16
> 15
> 16
> 16
> 16
> 16
69 ±6
67 ±6
66 ±6
65 ±6
70 ±7
69 ±6
65 ±6
60 ±6
58 ±6
13.3
±0.9
12.4
±0.8
9.0 ±0.5
7.1 ±0.7
6.3 ±0.5
5.6 ±0.4
5.1 ±0.4
15.1 ±1.5 13.8 ±0.9
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 26
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 20
> 21
> 22
> 22
> 23
> 25
> 25
> 25
> 24
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 16
> 17
> 17
> 17
> 16
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)
Max. effective power whole antenna
(W)
250 (at 50℃ ambient temperature)
700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
1509 x 449 x 196
Packing dimensions (H x W x D) (mm)
1770 x 535 x 240
Antenna weight (kg)
27.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(67)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
37.6 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1383
1509
Mast diameter supported (mm)
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
59
Frontal:
435 (at 150 km/h)
Lateral:
260 (at 150 km/h)
Maximum: 570 (at 150 km/h)
8 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
114
Product
List
Product
Category
AQU4518R37v06
DXXXX-690-960/690-960/1427-2690/1427-2690-65/65/65/6514.5i/14.5i/17.5i/17.5i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.5m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
c
b
Integrated RET S/N:
a HWxxxx…….Lr1
b HWxxxx…….Ly1
c HWxxxx…....Ry2
a
d
d HWxxxx…….Rr2
r - Red
y - Yellow
L - Left array R - Right array
y1
y2
r1
r2
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(Ly1/Ry2)
115
Product
List
Product
Category
AQU4518R36v06
DXXXX-690-960/690-960/1427-2690/1427-2690-65/65/65/6516i/16i/17.5i/17.5i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
2 x (1427 - 2690) (Ly1/Ry2)
1427 1518
880 - 960
Polarization
1695 1990
1920 2200
2200 2490
2490 2690
+45° , -45°
0 - 10 , continuously adjustable, each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
14.8
15.1
15.4
2 - 12, continuously adjustable, each band separately
15.7
15.7
16.9
17.1
17.3
17.5
over all Tilts 14.7 ±0.5 15.0 ±0.5 15.3 ±0.5 15.5 ±0.5 15.6 ±0.6 16.8 ±0.5 17.0 ±0.5 17.2 ±0.5 17.4 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
> 16
> 16
> 16
> 16
> 15
> 16
> 16
> 16
> 16
68 ±6
66 ±6
65 ±6
64 ±6
70 ±7
68 ±6
66 ±6
63 ±6
58 ±6
10.7 ±0.8
9.7 ±0.5
9.3 ±0.5
8.6 ±0.5
8.9 ±0.5
7.1 ±0.6
6.3 ±0.6
5.5 ±0.5
5.1 ±0.4
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 26
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 25
> 25
> 25
>24
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
>17
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)
>25
>26
>26
>25
>18
>18
>18
>17
250 (at 50℃ ambient temperature)
Max. effective power whole
antenna (W)
900 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
2099 x 449 x 196
Packing dimensions (H x W x D) (mm)
2360 x 535 x 240
Antenna weight (kg)
37.3
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
68
(635)
Antenna dimensions (H x W x D) (mm)
51.8 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1405
2099
Mast diameter supported (mm)
-40 .. +65
Frontal:
615 (at 150 km/h)
Lateral:
375 (at 150 km/h)
Maximum: 810 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
8 x 4.3-10 Female
Connector position
59
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 12 °
3.1 kg
1 (Separate packing)
116
Product
List
Product
Category
AQU4518R36v06
DXXXX-690-960/690-960/1427-2690/1427-2690-65/65/65/6516i/16i/17.5i/17.5i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx…….Lr1
HWxxxx…….Ly 1
HWxxxx…....Ry 2
y1
y2
r1
r2
HWxxxx…….Rr2
r - Red
y - Yellow
L - Left array R - Right array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(Ly1/Ry2)
117
Product
List
Product
Category
AQU4518R60v06
D04X-2x690-960/2x1427-2690-4x65-2x14i/2x18.5i-4xM-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs -1.5m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
Polarization
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
824 - 894
880 - 960
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
1920 2200
2200 2490
2490 2690
+45° , -45°
+45° , -45°
2 - 12, continuously adjustable, each band separately
13.4
13.6
15.8
17.3
17.8
18.2
18.5
15.8 ±0.9
17.2 ±0.7
17.7 ±0.7
18.0 ±0.5
18.4 ±0.5
13.8
13.0 ±0.6 13.3 ±0.5 13.5 ±0.5 13.7 ±0.5
Side lobe suppression for first side
lobe above main beam (dB)
1695 1990
2 - 14 , continuously adjustable, each band
separately
13.1
over all Tilts
790 - 862
2 x (1427 - 2690) (Ly1/Ry2)
1427 1518
> 15
> 16
> 16
> 15
> 15
> 16
> 16
> 16
> 16
72 ±7
66 ±6
64 ±6
61±6
70 ±7
63 ±7
61 ±6
60 ±6
58 ±6
7.3 ±0.8
6.7 ±0.7
6.0 ±0.6
5.1 ±0.6
15.1 ±0.9 13.8 ±0.7 13.3 ±0.5 12.4 ±0.5
8.9 ±0.8
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 25
≥ 25
Interband isolation (dB)
≥ 25
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 20
> 20
> 21
> 21
> 26
> 28
> 28
> 27
> 28
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
300 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Max. effective power whole
antenna (W)
1200 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
Mechanical Properties
68
Antenna dimensions (H x W x D) (mm)
1509 x 369 x 226
Packing dimensions (H x W x D) (mm)
1740 x 455 x 270
Antenna weight (kg)
25.8
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
(61)
2. Electrical datasheet in XML format is available.
36.5 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1380
1509
Mast diameter supported (mm)
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
68
Frontal:
295 (at 150 km/h)
Lateral:
345 (at 150 km/h)
Maximum: 535 (at 150 km/h)
8 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
118
Product
List
Product
Category
AQU4518R60v06
D04X-2x690-960/2x1427-2690-4x65-2x14i/2x18.5i-4xM-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs -1.5m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
c
Integrated RET S/N:
a HWxxxx……Lr1
b HWxxxx…..Ly 1
c HWxxxx…..Ry 2
a
d
y1
y2
r1
r2
d HWxxxx…...Rr2
r - Red
y - Yellow
L - Left array R - Right array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(Ly1/Ry2)
119
Product
List
Product
Category
AQU4518R61v06
D04X-2x690-960/2x1427-2690-4x65-2x15i/2x18.5i-4xM-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs -2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
Polarization
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
790 - 862
824 - 894
2 x (1427 - 2690) (Ly1/Ry2)
1427 1518
880 - 960
2490 2690
+45° , -45°
2 - 12, continuously adjustable, each band separately
14.7
> 15
Horizontal 3dB beam width (°)
2200 2490
+45° , -45°
14.9
> 16
16.1
17.6
18.0
18.5
18.6
16.0 ±0.8
17.5 ±0.7
17.9 ±0.7
18.4 ±0.5
18.5 ±0.5
> 15
> 16
> 16
> 16
> 16
15.1
over all Tilts 14.0 ±0.5 14.6 ±0.5 14.8 ±0.5 15.0 ±0.5
Vertical 3dB beam width (°)
1920 2200
2 - 12 , continuously adjustable, each band
separately
14.1
Side lobe suppression for first side
lobe above main beam (dB)
1695 1990
> 16
> 15
70 ±7
66 ±6
63 ±6
60 ±6
70 ±7
63 ±7
60 ±7
59 ±6
57 ±6
10.5 ±0.9
9.5 ±0.7
9.2 ±0.5
8.7 ±0.5
7.7 ±0.6
6.5 ±0.6
5.9 ±0.6
5.3 ±0.5
4.8 ±0.5
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 25
≥ 25
Interband isolation (dB)
≥ 25
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 20
> 22
> 22
> 23
> 26
> 26
> 26
> 26
> 26
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Max. effective power whole
antenna (W)
1200 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
2099 x 369 x 226
Packing dimensions (H x W x D) (mm)
2335 x 455 x 270
Antenna weight (kg)
(651)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
31.5
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
43.5 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1380
2099
Mast diameter supported (mm)
-40 .. +65
Frontal:
425 (at 150 km/h)
Lateral:
505 (at 150 km/h)
Maximum: 770 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
8 x 4.3-10 Female
Connector position
68
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
120
Product
List
Product
Category
AQU4518R61v06
D04X-2x690-960/2x1427-2690-4x65-2x15i/2x18.5i-4xM-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs -2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
c
Integrated RET S/N:
a HWxxxx……Lr1
b HWxxxx…..Ly 1
a
d
c HWxxxx…..Ry 2
y1
y2
r1
r2
d HWxxxx…...Rr2
r - Red
y - Yellow
L - Left array R - Right array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(Ly1/Ry2)
121
Product
List
Product
Category
AQU4518R63v06
D04X-2x690-960/2x1427-2690-4x65-2x16i/2x18.5i-4xM-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs -2.6m
Preliminary Issue
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
Polarization
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
790 - 862
824 - 894
2 x (1427 - 2690) (Ly1/Ry2)
1427 1518
880 - 960
Vertical 3dB beam width (°)
2200 2490
2490 2690
+45° , -45°
+45° , -45°
2 - 12, continuously adjustable, each band separately
15.6
15.8
16.1
17.6
18.0
18.5
18.6
16.0 ±0.8
17.5 ±0.7
17.9 ±0.7
18.4 ±0.5
18.5 ±0.5
16.2
over all Tilts 14.9 ±0.5 15.5 ±0.6 15.7 ±0.6 16.0 ±0.8
Horizontal 3dB beam width (°)
1920 2200
2 - 12 , continuously adjustable, each band
separately
15.0
Side lobe suppression for first side
lobe above main beam (dB)
1695 1990
> 16
> 17
> 17
> 16
> 15
> 16
> 16
> 16
> 16
70 ±7
65 ±6
63 ±6
58 ±6
70 ±7
63 ±7
60 ±7
59 ±6
57 ±6
8.8 ±0.7
7.9 ±0.6
7.6 ±0.5
7.3 ±0.5
7.7 ±0.6
6.5 ±0.6
5.9 ±0.6
5.3 ±0.5
4.8 ±0.5
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 25
≥ 25
Interband isolation (dB)
≥ 25
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 20
> 22
> 22
> 24
> 26
> 26
> 26
> 26
> 26
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)
Max. effective power whole
antenna (W)
1200 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
2550 x 369 x 226
Packing dimensions (H x W x D) (mm)
2945 x 455 x 275
Antenna weight (kg)
(651)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
35.5
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
51.0 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1380
2099
Mast diameter supported (mm)
-40 .. +65
Frontal:
530 (at 150 km/h)
Lateral:
630 (at 150 km/h)
Maximum: 965 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
8 x 4.3-10 Female
Connector position
68
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
122
Product
List
Product
Category
AQU4518R63v06
D04X-2x690-960/2x1427-2690-4x65-2x16i/2x18.5i-4xM-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs -2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
123
Product
List
Product
Category
AQU4518R23v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6514.5i/14.5i/18i/18i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
2 x (1695 - 2690) (Ly1/Ry2)
1695 1990
690 - 803 790 - 862 824 - 894 880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
0 - 14, continuously adjustable, each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
13.8
14.2
14.4
14.5
17.0
17.2
17.4
18.1
13.7 ±0.5
14.1 ±0.5
14.3 ±0.5
14.4 ±0.5
16.8 ±0.5
17.1 ±0.5
17.3 ±0.5
17.9 ±0.5
> 15
> 17
> 17
> 16
> 16
> 16
> 16
> 16
66 ±5
63 ±5
62 ±5
60 ±5
65 ±5
63 ±5
60 ±5
60 ±5
15.3 ±1.2
14.0 ±1.1
13.3 ±1.0
12.2 ±0.8
6.8 ±0.7
5.8 ±0.5
5.3 ±0.4
5.0 ±0.5
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12, continuously adjustable, each band
separately
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 24
> 24
> 25
> 26
> 27
> 27
> 27
Cross polar ratio (dB)
> 16
> 18
> 19
> 20
> 15
> 16
> 17
> 18
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
960 (at 50℃ ambient temperature)
Max. effective power whole antenna (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Antenna dimensions (H x W x D) (mm)
1499 x 429 x 196
Packing dimensions (H x W x D) (mm)
1740 x 515 x 250
Antenna weight (kg)
26.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(66)
Mechanical Properties
36.8 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1376
1499
Mast diameter supported (mm)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
57
Frontal:
410 (at 150 km/h)
Lateral:
245 (at 150 km/h)
Maximum: 540 (at 150 km/h)
Wind load (N)
8 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
124
Product
List
Product
Category
AQU4518R23v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6514.5i/14.5i/18i/18i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
c
b
Integrated RET S/N:
a HWxxxx……Ly1
b HWxxxx……Lr1
c HWxxxx…...Rr2
d
a
d
y1
y2
r1
r2
HWxxxx…...Ry2
r - Red
y - Yellow
L - Left array R - Right array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(Ly1/Ry2)
125
Product
List
Product
Category
AQU4518R24v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6516i/16i/18i/18i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
2 x (1695 - 2690) (Ly1/Ry2)
1695 1990
690 - 803 790 - 862 824 - 894 880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
0 - 10 , continuously adjustable, each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12, continuously adjustable, each band
separately
15.0
15.5
15.8
16.0
17.0
17.2
14.7 ±0.5
15.3 ±0.5
15.6 ±0.5
15.8 ±0.5
16.8 ±0.5
17.1 ±0.5
> 16
> 17
> 17
> 17
> 16
> 16
> 16
> 16
68 ±5
65 ±5
62 ±5
60 ±5
65 ±5
63 ±5
61 ±5
60 ±5
10.5±0.9
9.5 ±0.8
9.2 ±0.7
8.5 ±0.7
6.8 ±0.7
5.8 ±0.5
5.3 ±0.4
5.0 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
17.7
18.1
17.5 ±0.5 17.9±0.5
≥ 28
Front to back ratio , ±30° (dB)
> 23
> 25
> 26
> 26
> 26
> 27
> 27
> 28
Cross polar ratio (dB)
> 17
> 18
> 19
> 20
> 15
> 16
> 17
> 17
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
960 (at 50℃ ambient temperature)
Max. effective power whole antenna (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
Antenna dimensions (H x W x D) (mm)
1999 x 429 x 196
Packing dimensions (H x W x D) (mm)
2270 x 515 x 235
Antenna weight (kg)
(669)
Mechanical Properties
30.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
40.6 (Included clamps)
Mast diameter supported (mm)
50 - 115
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1273
1999
Radome material
Frontal:
555 (at 150 km/h)
Lateral:
340 (at 150 km/h)
Maximum: 735 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
8 x 4.3-10 Female
Connector position
57
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
126
Product
List
Product
Category
AQU4518R24v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6516i/16i/18i/18i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.7 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
c
b
Integrated RET S/N:
a HWxxxx……Ly1
b HWxxxx……Lr 1
c HWxxxx…...Rr 2
a
d
y1
y2
r1
r2
d HWxxxx…...Ry2
r - Red
y - Yellow
L - Left array R - Right array
Pattern sample for reference
1695 - 2690 MHz
(Ly1/Ry2)
690 - 960 MHz
(Lr1/Rr2)
127
Product
List
Product
Category
AQU4518R25v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6517i/17i/18i/18i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
2 x (1695 - 2690) (Ly1/Ry2)
1695 1990
690 - 803 790 - 862 824 - 894 880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
0 - 10, continuously adjustable, each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12, continuously adjustable, each band
separately
15.8
16.4
16.7
17.0
17.0
17.2
15.5 ±0.5
16.3 ±0.5
16.5 ±0.5
16.7 ±0.5
16.8 ±0.5
17.1 ±0.5
> 16
> 17
> 17
> 17
> 16
> 16
> 16
> 16
68 ±5
65 ±5
60 ±5
58 ±5
65 ±5
63 ±5
61 ±5
60 ±5
8.8 ±0.7
8.0 ±0.6
7.8 ±0.5
7.5 ±0.5
6.8 ±0.7
5.8 ±0.5
5.3 ±0.4
5.0 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
17.7
18.1
17.5 ±0.5 17.9 ±0.5
≥ 28
Front to back ratio , ±30° (dB)
> 25
> 26
> 26
> 26
> 26
> 27
> 27
> 28
Cross polar ratio (dB)
> 17
> 18
> 19
> 20
> 15
> 16
> 17
> 17
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
1000 (at 50℃ ambient temperature)
Max. effective power whole antenna (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
Antenna dimensions (H x W x D) (mm)
2550 x 429 x 196
Packing dimensions (H x W x D) (mm)
2810 x 515 x 240
Antenna weight (kg)
(706)
Mechanical Properties
33.9
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
48.4 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2550
50 - 115
1787
Mast diameter supported (mm)
Frontal:
735 (at 150 km/h)
Lateral:
450 (at 150 km/h)
Maximum: 965 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 4.3-10 Female
Bottom
57
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8 °
3.1 kg
1 (Separate packing)
128
Product
List
Product
Category
AQU4518R25v18
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6517i/17i/18i/18i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.7 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
c
b
Integrated RET S/N:
a HWxxxx……Ly1
b HWxxxx……Lr 1
c HWxxxx…...Rr 2
a
d
d HWxxxx…...Ry2
r - Red
y - Yellow
L - Left array R - Right array
y1
y2
r1
r2
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(Ly1/Ry2)
129
Product
List
Product
Category
AQU4521R2v06
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6517i/17i/21i/21i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
2 x (1695 - 2690) (Ly1/Ry2)
824 - 894
1695 1990
880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
0 - 10, continuously adjustable, each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
1 - 7, continuously adjustable, each band
separately
15.5
16.0
16.3
16.6
19.2
19.7
20.1
20.5
15.3 ±0.5
15.8 ±0.5
16.1 ±0.5
16.4 ±0.5
19.0 ±0.5
19.5 ±0.5
19.9 ±0.5
20.3 ±0.5
> 16
> 16
> 16
> 16
> 16
> 16
> 15
> 15
65 ±6
61 ±5
60 ±5
58 ±5
66 ±5
64 ±5
60 ±5
58 ±5
8.6 ±0.8
7.8 ±0.5
7.5 ±0.5
7.1 ±0.5
4.1 ±0.4
3.7 ±0.4
3.3 ±0.4
3.0 ±0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 24
> 25
> 25
> 25
> 25
> 25
> 27
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)
Max. effective power whole antenna (W)
250 (at 50℃ ambient temperature)
1000 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
Antenna dimensions (H x W x D) (mm)
2550 x 429 x 196
Packing dimensions (H x W x D) (mm)
2770 x 530 x 275
Antenna weight (kg)
40.5
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(706)
Mechanical Properties
62.5 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
2550
50 - 115
1787
Mast diameter supported (mm)
-40 .. +65
Frontal:
735 (at 150 km/h)
Lateral:
450 (at 150 km/h)
Maximum: 965 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 4.3-10 Female
Bottom
57
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8 °
3.1 kg
1 (Separate packing)
130
Product
List
Product
Category
AQU4521R2v06
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6517i/17i/21i/21i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.7 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Ly1
HWxxxx……Lr 1
HWxxxx…...Rr 2
HWxxxx…...Ry2
r - Red
y - Yellow
L - Left array R - Right array
y1
y2
r1
r2
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(Ly1/Ry2)
131
Product
List
Product
Category
AQU4518R30v07
DXXXX-690-862/880-960/1695-2690/1695-2690-65/65/65/6515.5i/16i/18i/18i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 – 862 (r1)
Frequency range (MHz)
690 - 803
880 – 960 (r2)
790 - 862
Polarization
2 x (1695 - 2690) (Ly1/Ry2)
1695 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
0 - 10 , continuously adjustable , each band separately
Electrical downtilt (°)
at mid tilt
Gain (dBi)
over all tilts
14.9
15.2
15.6
17.2
17.5
17.9
18.0
14.9 ±0.5
15.0 ±0.5
15.5 ±0.3
17.1 ±0.4
17.4 ±0.5
17.8 ±0.5
17.9 ±0.4
> 15
> 15
> 16
> 15
> 15
> 16
> 16
69 ±5
67 ±5
64 ±5
64 ±5
62 ±5
61 ±5
60 ±5
11.2 ±0.8
10.0 ±0.7
8.7 ±0.6
6.3 ±0.5
5.7 ±0.4
5.0 ±0.5
4.6 ±0.3
Side lobe suppression for first side lobe
above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28 (690 - 862 // 880 - 960 MHz)
≥ 30 (690 - 862 // 1695 - 2690 MHz)
≥ 30 (880 - 960 // 1695 - 2690 MHz)
≥ 30 (1695 - 2690 // 1695 - 2690 MHz)
Interband isolation (dB)
Front to back ratio, ±30° (dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
> 26
> 27
> 27
> 25
> 26
> 26
> 26
> 17
> 16
> 16
> 18
> 18
> 18
> 18
400 (at 50℃ ambient temperature)
Max. effective power whole antenna (W)
250 (at 50℃ ambient temperature)
900 (at 50℃ ambient temperature)
≤ -150 (2 x 43 dBm carrier)
Intermodulation IM3 (dBc)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
Antenna dimensions (H x W x D) (mm)
1999 x 349 x 166
Packing dimensions (H x W x D) (mm)
2350 x 415 x 240
Antenna weight (kg)
(637)
Mechanical Properties
25.7
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
38.6 (included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1310
1999
Mast diameter supported (mm)
-40 .. +65
Frontal:
630 (at 150 km/h)
Lateral:
180 (at 150 km/h)
Maximum: 665 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 4.3-10 Female
Bottom
52
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
132
Product
List
Product
Category
AQU4518R30v07
DXXXX-690-862/880-960/1695-2690/1695-2690-65/65/65/6515.5i/16i/18i/18i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
r2
HWxxxx…..Ly1
HWxxxx….…r1
HWxxxx….....r2
y1
HWxxxx......Ry2
r - Red
y - Yellow
L - Left array R - Right array
y2
r1
Pattern sample for reference
690 - 862 MHz
(r1)
880 - 960 MHz
(r2)
133
1695 - 2690 MHz
(Ly1/Ly2)
Product
List
Product
Category
AQU4518R58v06
DXXXX-690-862/880-960/1695-2690/1695-2690-65/65/65/6516.5i/17i/18i/18i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 - 862 (r1)
Frequency range (MHz)
690 - 803
880 - 960 (r2)
790 - 862
2 x (1695 - 2690) (Ly1/Ry2)
1695 - 1990
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
0 - 10 , continuously adjustable, each band separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
15.8
16.2
16.6
17.2
17.7
17.9
18.1
15.7 ±0.5
16.0 ±0.5
16.3 ±0.5
17.1 ±0.6
17.5 ±0.5
17.7 ±0.5
17.9 ±0.6
> 15
> 15
> 15
> 16
> 16
> 16
> 16
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
68 ±5
66 ±3
64 ±3
65 ±6
63 ±5
60 ±6
59 ±6
9.1 ±0.6
8.3 ±0.4
7.4 ±0.5
6.4 ±0.5
5.8 ±0.5
5.2 ±0.4
4.7 ±0.3
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 26
Front to back ratio, ±30° (dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
≥ 30
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 18
> 18
> 16
> 18
> 18
> 18
> 17
400 (at 50℃ ambient temperature)
Max. effective power whole antenna
(W)
250 (at 50℃ ambient temperature)
1000 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
Mechanical Properties
2528 x 349 x 166
Packing dimensions (H x W x D) (mm)
2880 x 415 x 245
(591)
Antenna dimensions (H x W x D) (mm)
Antenna weight (kg)
30.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
44.6 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2528
50 - 115
1885
Mast diameter supported (mm)
Frontal:
825 (at 150 km/h)
Lateral:
240 (at 150 km/h)
Maximum: 870 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
134
52
Accessories
Product
List
Product
Category
AQU4518R58v06
DXXXX-690-862/880-960/1695-2690/1695-2690-65/65/65/6516.5i/17i/18i/18i-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
r2
Integrated RET S/N:
HWxxxx…...Ly1
HWxxxx……..r1
HWxxxx……..r2
HWxxxx......Ry2
y1
y2
r1
r - Red
L - Left array
y - Yellow
R - Right array
Pattern sample for reference
690 - 862 MHz
(r1)
880 - 960 MHz
(r2)
135
1695 - 2690 MHz
(Ly1/Ry2)
Product
List
Product
Category
AQU4517R4v06
DXXXX-690-862/880-960/1710-2690/1710-2690-65/65/65/6514i/14.5i/17.5i/17.5i/-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
690 – 862 (r)
Frequency range (MHz)
690 - 803
2 x (1710 - 2690) (yL/yyR)
880 – 960
(rr)
790 - 862
Polarization
1710 1990
1920 - 2200 2200 - 2490
2490 2690
+45° , -45°
0 - 12 , continuously adjustable, each
band separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe
above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
0 - 10 , continuously adjustable, each band
separately
13.8
13.9
14.2
17.4
17.8
18.2
18.3
14.0 ±0.5
14.1 ±0.3
14.3 ±0.3
17.3 ±0.5
17.7 ±0.5
18.1 ±0.5
18.2 ±0.4
> 16
> 16
> 15
> 18
> 18
> 18
> 18
66 ±1.7
64 ±2.6
64 ±3.5
65 ±3.9
63 ±3.3
62 ±4.8
60 ±4.5
15.2 ±2.3
13.3 ±1.8
11.8 ±2.0
7.1 ±0.6
6.5 ±0.5
5.8 ±0.5
5.2 ±0.3
> 28
> 28
> 28
> 19
> 20
> 20
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
Front to back ratio, ±30° (dB)
Cross polar ratio (dB)
≥ 28
≥ 28 (690 - 862 // 880 - 960 MHz)
≥ 30 (690 - 862 // 1710 - 2690 MHz)
≥ 30 (880 - 960 // 1710 - 2690 MHz)
≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
0°
Max. effective power per port (W)
> 25
> 25
> 25
> 30
> 18
> 20
> 20
> 19
300 (at 50℃ ambient temperature)
Max. effective power whole antenna (W)
250 (at 50℃ ambient temperature)
700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1499 x 359 x 178
Packing dimensions (H x W x D) (mm)
1880 x 425 x 255
Antenna net weight (kg)
68
(100)
2. Electrical datasheet in XML format is available.
22.0
Bracket weight (kg)
4.2 (2 units)
Packing weight (kg)
36.3 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1347
1499
Mast diameter supported (mm)
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
52
Frontal :
475 (at 150 km/h)
Lateral:
140 (at 150 km/h)
Maximum: 495 (at 150 km/h)
8 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16°
2.1 kg
1 (Separate packing)
136
Product
List
Product
Category
AQU4517R4v06
DXXXX-690-862/880-960/1710-2690/1710-2690-65/65/65/6514i/14.5i/17.5i/17.5i/-M/M/M/M-R
EasyRET 2L2H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
rr
HWxxxx…...yL
HWxxxx…….r
yL
HWxxxx……rr
yyR
HWxxxx....yyR
r - Red
L - Left array
y - Yellow
R - Right array
r
Pattern sample for reference
690 - 862 MHz
(r)
880 - 960 MHz
(rr)
137
1710 - 2690 MHz
(yL/yyR)
Product
List
Product
Category
APE4518R13v06
DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-14.5i/14.5i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization
Electrical downtilt (°)
Gain (dBi)
1427 – 2690 (Cy2)
at mid Tilt
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
1695 1990
1920 2200
2200 2490
+45° , -45°
+45° , -45°
0 - 14 , continuously adjustable , each
band separately
2 - 12 , continuously adjustable
13.7
over all Tilts
1427 1518
14.3
14.6
14.8
16.2
13.6 ±0.5 14.2 ±0.5 14.5 ±0.5 14.7 ±0.5 16.1 ±0.5
> 15
> 17
> 17
> 17
70 ±5
70 ±4
69 ±4
65 ±4
2490 2690
17.4
17.8
18.1
18.1
17.3 ±0.5
17.7 ±0.5
18.0 ±0.5
18.0 ±0.5
> 16
> 16
> 17
> 17
> 15
62 ±7
61 ±7
60 ±6
58 ±5
58 ±5
15 .4 ±1.5 13.8 ±0.9 13 .3 ±0.7 12.1 ±0.7
7.9 ±0.5
6.4 ±0.5
5.8 ±0.5
5.1 ±0.3
4.7 ±0.3
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Vertical 3dB beam width (°)
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
≥ 28
> 22
> 23
> 24
> 24
> 25
> 18
> 20
> 23
> 23
> 15
≥ 28
500 (at 50℃ ambient temperature)*
> 28
> 28
> 28
> 26
> 18
> 18
> 16
> 15
300 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690) (Ly1/Ry3)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2490 - 2690
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
2200 - 2490
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
17.4
17.8
18.0
18.0
17.3 ±0.5
17.7 ±0.5
17.9 ±0.5
17.9 ±0.5
> 15
> 17
> 17
> 17
62 ±6
60 ±6
58 ±5
58 ±4
6.5 ±0.5
5.6 ±0.3
5.2 ±0.2
4.7 ±0.3
> 26
> 26
> 26
> 19
> 20
> 17
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
Cross polar ratio (dB)
> 26
0°
> 19
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
138
Product
List
Product
Category
68
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1499 x 469 x 206
Packing dimensions (H x W x D) (mm)
1870 x 535 x 285
Antenna weight (kg)
33.1
Clamps weight (kg)
6.3 (2 units)
50.9 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1383
Mast diameter supported (mm)
1499
Antenna packing weight (kg)
(59)
APE4518R13v06
DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-14.5i/14.5i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 1.4m
Frontal:
440 (at 150 km/h)
Lateral:
265 (at 150 km/h)
Maximum: 585 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
250
Connector
57
Survival wind speed (km/h)
10 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Description
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 16 °
Weight
Units per antenna
3.1 kg
1 (Separate packing)
139
Product
List
Product
Category
APE4518R13v06
DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-14.5i/14.5i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)s)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Lr 1
HWxxxx……Ly1
HWxxxx……Cy2
HWxxxx……Ry3
y1
HWxxxx……Rr 2
y2
r1
y3
r2
r - Red
y – Yellow
L - Left array
C - Center array R - Right array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(Cy2)
140
1695 - 2690 MHz
(Ly1/Ry3)
Product
List
Product
Category
APE4518R14v06
DXXXXX-690-960/690-960/1427-2200/1695-2690/1695-269065/65/65/65/65-16i/16i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
880 - 960
1427 - 1518 1695 - 1990 1920 - 2200
+45° , -45°
+45° , -45°
0 - 10 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
1427 – 2200 (b1)
824 - 894
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12 , continuously adjustable
14.8
15.4
15.7
16.0
16.0
17.3
17.4
14.7 ±0.4
15.3 ±0.4
15.5 ±0.3
15.8 ±0.4
15.8 ±0.6
17.2 ±0.4
17.3 ±0.5
> 17
> 17
> 17
> 17
> 15
> 16
> 16
70 ±5
69 ±4
68 ±3
64 ±4
63 ±7
64 ±7
65 ±6
11.0 ±0.8
9.8 ±0.5
9.5 ±0.5
8.8 ±0.5
7.9 ±0.3
6.3 ±0.5
5.8 ±0.4
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 24
Cross polar ratio (dB)
> 20
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
> 25
> 25
> 25
> 20
> 20
> 21
> 25
> 27
> 27
> 16
> 18
> 18
500 (at 50℃ ambient temperature)*
300 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690) (Ly1/Ry2)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
2200 - 2490
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
17.0
17.5
17.6
18.0
16.9 ±0.6
17.4 ±0.5
17.5 ±0.5
17.9 ±0.5
> 18
> 19
> 19
> 18
63 ±6
61 ±6
60 ±6
60 ±6
7.4 ±0.7
6.6 ±0.6
5.8 ±0.3
5.3 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 25
> 27
> 27
> 27
Cross polar ratio (dB)
> 18
> 18
> 17
> 18
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
141
Product
List
Product
Category
APE4518R14v06
DXXXXX-690-960/690-960/1427-2200/1695-2690/1695-269065/65/65/65/65-16i/16i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.0m
Mechanical Properties
1999 x 469 x 206
Packing dimensions (H x W x D) (mm)
2255 x 535 x 285
Antenna weight (kg)
38.9
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
106
(506)
Antenna dimensions (H x W x D) (mm)
60.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
1420
1999
Frontal:
600 (at 150 km/h)
Lateral:
365 (at 150 km/h)
Maximum: 795 (at 150 km/h)
Wind load (N)
200
Survival wind speed (km/h)
250
10 x 4.3-10 Female
Connector position
73
Connector
Bottom
Accessories
Item
Model
Description
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 16 °
Weight
Units per antenna
3.1 kg
1 (Separate packing)
142
Product
List
Product
Category
APE4518R14v06
DXXXXX-690-960/690-960/1427-2200/1695-2690/1695-269065/65/65/65/65-16i/16i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)s)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Lr 1
HWxxxx……Ly1
HWxxxx…….b 1
HWxxxx……Ry2
HWxxxx……Rr 2
y1
b1
r1
r - Red
L - Left array
y - Yellow
R - Right array
y2
r2
b - Blue
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(Cy2)
143
1695 - 2690 MHz
(Ly1/Ry3)
Product
List
Product
Category
APE4518R30v06
DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-17i/17i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
824 - 894
1427 – 2690 (Cy2)
880 - 960 1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable , each band
separately
2 - 12 , continuously adjustable
15.8
16.4
16.7
17.0
16.2
17.3
17.4
17.9
18.0
15.6 ±0.5
16.3 ±0.5
16.5 ±0.5
16.7 ±0.5
16.1 ±0.5
17.2 ±0.5
17.3 ±0.5
17.8 ±0.5
17.9 ±0.5
> 15
> 15
> 16
> 16
> 15
> 16
> 16
> 17
> 17
70 ±5
69 ±4
68 ±3
64 ±4
62 ±7
61 ±7
62 ±6
58 ±5
58 ±5
9.0 ±0.5
8.0 ±0.4
7.7 ±0.5
7.2 ±0.4
7.9 ±0.4
6.6 ±0.4
5.8 ±0.3
5.2 ±0.3
4.8 ±0.2
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
> 22
> 24
> 24
> 25
> 25
> 20
> 24
> 24
> 24
> 15
500 (at 50℃ ambient temperature)*
≥ 28
> 28
> 28
> 28
> 28
> 18
> 16
> 16
> 15
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690) (Ly1/Ry3)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2490 - 2690
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
2200 - 2490
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
17.0
17.5
17.6
18.0
16.9 ±0.6
17.4 ±0.5
17.5 ±0.5
17.9 ±0.5
> 16
> 16
> 18
> 17
62 ±5
60 ±5
58 ±4
58 ±4
6.5 ±0.5
5.6 ±0.4
5.2 ±0.2
4.8 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
Cross polar ratio (dB)
0°
> 27
> 27
> 27
> 27
> 22
> 20
> 19
> 18
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
144
Product
List
Product
Category
APE4518R30v06
DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-17i/17i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.6m
106
Antenna dimensions (H x W x D) (mm)
2550 x 469 x 206
Packing dimensions (H x W x D) (mm)
2805 x 535 x 285
Antenna weight (kg)
44.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(604)
Mechanical Properties
68 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1873
2550
Mast diameter supported (mm)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
73
Frontal:
780 (at 150 km/h)
Lateral:
485 (at 150 km/h)
Maximum: 1035 (at 150 km/h)
Wind load (N)
10 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8°
3.1 kg
1 (Separate packing)
145
Product
List
Product
Category
APE4518R30v06
DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-17i/17i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET 2L3H 10-Port Antenna with 5 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Lr1
HWxxxx……Ly1
HWxxxx……Cy2
HWxxxx……Ry3
y1
HWxxxx……Rr2
r - Red
L - Left array
y2
r1
y - Yellow
R - Right array
y3
r2
C - Center array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(Cy2)
146
1695 - 2690 MHz
(Ly1/Ry3)
Product
List
Product
Category
ASI4516R0v07
DXXXXXX-617-894/617-894/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-15.5i/15.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (617 - 894) (Lr1/Rr2)
Frequency range (MHz)
617 - 698
698 - 798
4 x (1695 - 2690) (Ly1/CLy2/CRy3/Ry4)
814 - 894
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45°
2 - 14 , continuously adjustable, each
band separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
14.3
14.9
15.4
17.0
17.2
17.6
18.0
14.1 ±0.6
14.8 ±0.5
15.2 ±0.6
16.9 ±0.5
17.2 ±0.5
17.5 ±0.5
17.9 ±0.5
> 15
> 16
> 16
> 15
> 15
> 16
> 16
69 ±5
67 ±6
63 ±6
65 ±6
62 ±5
61 ±5
60 ±6
13.0 ±1.3
10.9 ±1
9.6 ±0.8
7.4 ±0.6
6.6 ±0.5
5.8 ±0.4
5.3 ±0.4
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12, continuously adjustable, each band separately
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 21
> 21
> 22
> 24
> 24
> 25
> 25
Cross polar ratio (dB)
> 17
> 17
> 18
> 17
> 17
> 17
> 18
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Max. effective power whole
antenna (W)
900 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
2099 x 499 x 206
Packing dimensions (H x W x D) (mm)
2360 x 550 x 245
Antenna weight (kg)
43.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
106
(604)
Antenna dimensions (H x W x D) (mm)
56.7 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2099
Fiberglass
1420
Radome material
Frontal:
895 (at 150 km/h)
Lateral:
425 (at 150 km/h)
Maximum: 1075 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
12 x 4.3-10 Female
Connector position
75
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 12 °
3.1 kg
1 (Separate packing)
147
Product
List
Product
Category
ASI4516R0v07
DXXXXXX-617-894/617-894/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-15.5i/15.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx…….Lr1
HWxxxx…….Ly1
HWxxxx…..CLy2
HWxxxx…..CRy3
HWxxxx…….Ry4
y1
r1
HWxxxx……..Rr2
r - Red
C - Center array
y2
y - Yellow
L - Left array
y3
y4
r2
R - Right array
Pattern sample for reference
1695 - 2690 MHz
(Ly1/CLy2/CRy3/Ry4)
617 - 894 MHz
(Lr1/Rr2)
148
Product
List
Product
Category
ASI4518R37v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x652x14.5i/2x18i/2x18i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.5m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
Electrical downtilt (°)
at mid Tilt
824 - 894
2 x (1695 - 2690) (Ly1/Ry4)
1695 1990
880 - 960
1920 2200
2200 2490
2490 2690
+45° , -45°
+45° , -45°
2 - 16 , continuously adjustable, each band
separately
2 - 12 , continuously adjustable, each band
separately
13.8
14.1
14.2
14.3
17.0
17.5
17.8
18.4
13.7 ±0.6
14.0 ±0.5
14.1 ±0.5
14.2 ±0.6
16.9 ±0.7
17.4 ±0.7
17.7 ±0.6
18.3 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 15
> 16
> 16
> 16
> 15
> 16
> 16
> 16
Horizontal 3dB beam width (°)
70 ±7
69 ±6
68 ±6
63 ±6
69 ±7
65 ±6
63 ±6
58 ±6
15.2 ±1.3
13.9 ±0.9
13.2 ±0.9
12.4 ±0.8
7.2 ±0.8
6.5 ±0.8
5.7 ±0.7
5.2 ±0.5
Gain (dBi)
over all Tilts
Vertical 3dB beam width (°)
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 27
≥ 27
Interband isolation (dB)
≥ 26
≥ 26
Front to back ratio , ±30° (dB)
> 21
> 22
> 22
> 22
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 17
> 17
> 17
> 18
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
50
50
DC Ground
DC Ground
Electrical Properties
2 x (1427 - 2690) (CLy2/CRy3)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
15.7
17.2
17.5
17.9
18.5
15.7 ±0.9
17.1 ±0.8
17.4 ±0.6
17.8 ±0.6
18.4 ±0.6
Side lobe suppression for first side
lobe above main beam (dB)
> 15
> 16
> 16
> 16
> 16
Horizontal 3dB beam width (°)
70 ±8
69 ±6
66 ±6
62 ±6
58 ±6
9.0 ±0.8
7.2 ±0.8
6.5 ±0.8
5.7 ±0.7
5.2 ±0.5
Vertical 3dB beam width (°)
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 27
Interband isolation (dB)
≥ 25
≥ 26
Front to back ratio , ±30° (dB)
> 25
> 25
> 25
> 26
> 26
Cross polar ratio (dB)
> 17
> 17
> 18
> 18
> 17
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 1400 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
149
Product
List
Product
Category
ASI4518R37v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x652x14.5i/2x18i/2x18i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.5m
Antenna dimensions (H x W x D) (mm)
1509 x 469 x 206
Packing dimensions (H x W x D) (mm)
1760 x 555 x 250
Antenna weight (kg)
68
(67)
Mechanical Properties
31
Clamps weight (kg)
4.2 (2 units)
41.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Radome colour
1383
1509
Antenna packing weight (kg)
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
59
Frontal:
445 (at 150 km/h)
Lateral:
265 (at 150 km/h)
Maximum: 590 (at 150 km/h)
12 x 4.3-10 Female
Connector position
Bottom
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
150
Product
List
Product
Category
ASI4518R37v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x652x14.5i/2x18i/2x18i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.5m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
c
d
Integrated RET S/N:
e
a HWxxxx…....Lr1
b HWxxxx……Ly1
c HWxxxx….CLy2
d HWxxxx….CRy3
a
f
y1
y2
y3
y4
e HWxxxx……Ry4
f HWxxxx……Rr2
r - Red
L - Left array
r1
y - Yellow
R - Right array
r2
C - Center array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(Ly1/Ry4)
151
1427 - 2690 MHz
(CLy2/CRy3)
Product
List
Product
Category
ASI4518R39v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x652x15.5i/2x18i/2x18i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
Electrical downtilt (°)
at mid Tilt
824 - 894
2 x (1695 - 2690) (Ly1/Ry4)
1695 1990
880 - 960
1920 2200
2200 2490
2490 2690
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable, each band
separately
2 - 12 , continuously adjustable, each band
separately
17.4
17.9
18.3
18.7
15.0
15.2
15.4
15.5
14.9 ±0.6
15.1 ±0.5
15.3 ±0.5
15.4 ±0.6
Side lobe suppression for first
side lobe above main beam (dB)
> 15
> 16
> 16
> 16
> 15
> 16
> 16
> 16
Horizontal 3dB beam width (°)
70 ±7
69 ±6
67 ±6
62 ±6
69 ±7
64 ±6
63 ±6
58 ±6
10.9 ±0.8
10.0 ±0.7
9.6 ±0.6
9.0 ±0.5
6.5 ±0.9
5.8 ±0.7
5.3 ±0.6
4.7 ±0.5
Gain (dBi)
over all Tilts
Vertical 3dB beam width (°)
17.3 ±0.7 17.8 ±0.6 18.2 ±0.5 18.6 ±0.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 27
≥ 27
Interband isolation (dB)
≥ 27
≥ 27
Front to back ratio , ±30° (dB)
> 21
> 21
> 22
> 22
> 23
> 24
> 25
> 24
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 16
> 16
> 16
> 17
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
50
50
DC Ground
DC Ground
Electrical Properties
2 x (1427 - 2690) (CLy2/CRy3)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
16.2
17.5
18.0
18.4
18.7
16.1 ±0.7
17.4 ±0.7
17.9 ±0.5
18.3 ±0.5
18.6 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 15
> 16
> 16
> 16
> 16
Horizontal 3dB beam width (°)
70 ±8
69 ±6
66 ±6
61 ±6
58 ±7
8.0 ±0.6
6.5 ±0.6
5.9 ±0.6
5.3 ±0.5
4.7 ±0.4
Vertical 3dB beam width (°)
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 27
Interband isolation (dB)
≥ 25
≥ 27
Front to back ratio , ±30° (dB)
> 24
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 17
> 17
> 18
> 18
> 18
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 1400 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
152
Product
List
Product
Category
ASI4518R39v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x652x15.5i/2x18i/2x18i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2009 x 469 x 206
Packing dimensions (H x W x D) (mm)
2265 x 555 x 255
Antenna weight (kg)
37.5
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
52 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
605 (at 150 km/h)
Lateral:
370 (at 150 km/h)
Maximum: 800 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
12 x 4.3-10 Female
Connector position
Bottom
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
153
Product
List
Product
Category
ASI4518R39v07
D06X-2x690-960/2x1427-2690/2x1695-2690-6x652x15.5i/2x18i/2x18i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
c
d
Integrated RET S/N:
e
a HWxxxx…....Lr1
b HWxxxx……Ly1
c HWxxxx….CLy2
d HWxxxx….CRy3
a
f
y1
y2
y3
y4
e HWxxxx……Ry4
f HWxxxx……Rr2
r - Red
L - Left array
r1
y - Yellow
R - Right array
r2
C - Center array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(Ly1/Ry4)
154
1427 - 2690 MHz
(CLy2/CRy3)
Product
List
Product
Category
ASI4518R10v09
D06X-2x690-960/2x1427-2690/2x1695-2690-6x652x17i/2x17.5i/2x17.5i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
824 - 894
2 x (1695 - 2690) (LTy2/RTy4)
1695 1990
880 - 960
1920 2200
2200 2490
2490 2690
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable, each band
separately
2 - 12 , continuously adjustable, each band
separately
15.6
16.0
16.2
16.3
17.0
17.2
17.4
17.6
15.5 ±0.6
15.9 ±0.6
16.1 ±0.6
16.2 ±0.6
16.9 ±0.6
17.1 ±0.5
17.3 ±0.6
17.5 ±0.5
> 15
> 16
> 16
> 16
> 15
> 15
> 16
> 16
70 ±7
67 ±6
66 ±6
64 ±6
63 ±6
61 ±6
61 ±6
60 ±6
9.1 ±0.8
8.3 ±0.6
7.9 ±0.5
7.5 ±0.5
6.5 ±0.7
5.9 ±0.7
5.3 ±0.6
4.8 ±0.6
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
≥ 26
≥ 28
Front to back ratio , ±30° (dB)
> 21
> 22
> 23
> 24
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 17
> 17
> 16
> 16
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1427- 2690) (LBy1/RBy3)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.6
16.8
17.0
17.2
17.5
15.5 ±0.7
16.7 ±0.6
16.9 ±0.6
17.1±0.6
17.4 ±0.6
> 15
> 16
> 16
> 16
> 16
69 ±7
62 ±6
61 ±6
61 ±6
58 ±6
9.3 ±0.8
7.4 ±0.8
6.4 ±0.8
5.7 ±0.6
5.2 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥25
≥28
Interband isolation (dB)
≥25
Front to back ratio , ±30° (dB)
> 23
> 26
> 26
> 26
> 25
Cross polar ratio (dB)
> 16
> 18
> 18
> 16
> 16
0°
Max. effective power per port (W)
≥28
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
155
Product
List
Product
Category
ASI4518R10v09
D06X-2x690-960/2x1427-2690/2x1695-2690-6x652x17i/2x17.5i/2x17.5i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.6m
Mechanical Properties
2695 x 429 x 196
Packing dimensions (H x W x D) (mm)
2955 x 515 x 245
Antenna weight (kg)
41
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(851)
68
Antenna dimensions (H x W x D) (mm)
56.5 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2695
50 - 115
1787
Mast diameter supported (mm)
Frontal:
780 (at 150 km/h)
Lateral:
480 (at 150 km/h)
Maximum: 1030 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
12 x 4.3-10 Female
Connector position
57
Connector
Bottom
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8 °
3.1 kg
1 (Separate packing)
156
Product
List
Product
Category
ASI4518R10v09
D06X-2x690-960/2x1427-2690/2x1695-2690-6x652x17i/2x17.5i/2x17.5i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
c
Integrated RET S/N:
d
HWxxxx……LTy2
HWxxxx……LBy1
y2
y4
HWxxxx...…RTy4
y1
y3
HWxxxx……Rr2
r1
r2
HWxxxx……Lr1
HWxxxx...…RBy3
f
a
e
r - Red
R - Right array
y – Yellow
T - Top array
L - Left array
B - Bottom array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(Ly1/Ry4)
157
1427 - 2690 MHz
(CLy2/CRy3)
Product
List
Product
Category
ASI4517R12v06
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/65/65-15i/15i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
2 x (1695 - 2690) (LTy2/RTy4)
880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
2 - 12 , continuously adjustable, each band
separately
Electrical downtilt (°)
Gain (dBi)
1695 1990
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
14.1
14.7
14.9
2 - 12 , continuously adjustable, each band
separately
15.2
15.5
15.9
16.1
16.3
14.0 ±0.5 14.6 ±0.5 14.8 ±0.5 15.0 ±0.5 15.4 ±0.6 15.8 ±0.5 16.0 ±0.5 16.2 ±0.5
> 15
> 16
> 16
> 15
> 16
> 16
> 16
> 16
70 ±6
62 ±6
59 ±6
56 ±6
63 ±6
60 ±6
59 ±6
57 ±6
10.9 ±0.9
9.9 ±0.7
9.4 ±0.5
8.9 ±0.5
9.0 ±0.8
8.0 ±0.7
7.2 ±0.4
6.5 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 25
Interband isolation (dB)
≥ 25
≥ 28
Front to back ratio , ±30° (dB)
> 20
> 21
> 22
> 22
> 24
> 24
> 25
> 24
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 17
> 17
> 16
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
300 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
50
50
DC Ground
DC Ground
Electrical Properties
2 x (1427- 2690) (LBy1/RBy3)
Frequency range (MHz)
1427 - 1518
1695 - 1990
1920 - 2200
Polarization
2490 - 2690
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
2200 - 2490
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
14.8
15.6
16.0
16.2
16.3
14.7 ±0.6
15.5 ±0.6
15.9 ±0.6
16.1 ±0.5
16.2 ±0.5
> 15
> 16
> 16
> 16
> 16
65 ±6
66 ±6
62 ±6
59 ±6
57 ±6
11.1 ±0.8
9.0 ±0.8
8.1 ±0.7
7.2 ±0.4
6.5 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 25
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 24
> 26
> 26
> 26
> 25
Cross polar ratio (dB)
> 18
> 16
> 16
> 17
> 17
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
158
Product
List
Product
Category
ASI4517R12v06
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/65/65-15i/15i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
2099 x 369 x 226
Packing dimensions (H x W x D) (mm)
2335 x 455 x 270
34.5
Clamps weight (kg)
(738)
Antenna weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
46.5 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2099
50 - 115
1303
Mast diameter supported (mm)
Frontal:
425 (at 150 km/h)
Lateral:
505 (at 150 km/h)
Maximum: 770 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
12 x 4.3-10 Female
Connector position
58
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
159
Product
List
Product
Category
ASI4517R12v06
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/65/65-15i/15i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx…........Lr1
HWxxxx…….LBy1
HWxxxx……..LTy2
y2
y4
y1
r1
y3
r2
HWxxxx…….RTy4
HWxxxx…….RBy3
f
HWxxxx………Rr2
r - Red
R - Right array
y – Yellow
T - Top array
L - Left array
B - Bottom array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(LTy2/RTy4)
160
1695 - 2690 MHz
(LBy1/RBy3)
Product
List
Product
Category
ASI4518R57v06
D06X-2x690-960/2x1427-2690/2x1695-26906x65-2x16i/2x18i/2x18i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
824 - 894
2 x (1695 - 2690) (LBy1/RBy3)
1695 1990
880 - 960
1920 2200
2200 2490
2490 2690
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable, each band
separately
2 - 12 , continuously adjustable, each band
separately
15.0
15.6
15.8
17.0
16.2
17.6
17.9
18.5
14.9 ±0.5 15.5 ±0.6 15.7 ±0.6 16.0 ±0.8 17.0 ±0.6 17.5 ±0.6 17.8 ±0.5 18.4 ±0.5
> 16
> 17
> 17
> 16
> 16
> 16
> 16
> 16
70 ±7
65 ±6
63 ±6
58 ±6
63 ±7
61±6
60 ±6
58 ±6
8.8 ±0.7
7.9 ±0.6
7.6 ±0.5
7.3 ±0.5
7.6 ±0.6
6.9 ±0.6
6.2 ±0.5
5.3 ±0.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 25
Interband isolation (dB)
≥ 25
≥ 28
Front to back ratio , ±30° (dB)
> 20
> 22
> 22
> 24
> 27
> 28
> 27
> 28
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
50
50
DC Ground
DC Ground
Impedance (Ω)
Grounding
Electrical Properties
2 x (1427 - 2690) (LTy2/RTy4)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.3
16.8
17.4
17.6
18.1
15.2 ±0.7
16.7 ±0.6
17.3 ±0.5
17.5 ±0.5
18.0 ±0.5
> 15
> 16
> 16
> 16
> 16
70 ±7
63 ±7
61 ±6
60 ±6
58 ±6
9.5 ±0.7
7.6 ±0.6
6.9 ±0.6
6.2 ±0.6
5.3 ±0.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 25
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 26
> 27
> 27
> 28
> 28
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1400 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
161
Product
List
Product
Category
ASI4518R57v06
D06X-2x690-960/2x1427-2690/2x1695-26906x65-2x16i/2x18i/2x18i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.6m
68
Antenna dimensions (H x W x D) (mm)
2769 x 369 x 226
Packing dimensions (H x W x D) (mm)
2975 x 455 x 275
Antenna weight (kg)
41.7
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(801)
Mechanical Properties
58.7 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1900
2769
Mast diameter supported (mm)
Frontal:
585 (at 150 km/h)
Lateral:
695 (at 150 km/h)
Maximum: 1060 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
12 x 4.3-10 Female
Bottom
68
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8°
3.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(LTy2/RTy4)
162
1695 - 2690 MHz
(LBy1/RBy3)
Product
List
Product
Category
ASI4518R57v06
D06X-2x690-960/2x1427-2690/2x1695-26906x65-2x16i/2x18i/2x18i-6xM-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx…........Lr1
HWxxxx…….LBy1
HWxxxx……..LTy2
y2
y4
y1
r1
y3
r2
HWxxxx…….RTy4
HWxxxx…….RBy3
HWxxxx………Rr2
r - Red
R - Right array
y – Yellow
T - Top array
L - Left array
B - Bottom array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(LTy2/RTy4)
163
1695 - 2690 MHz
(LBy1/RBy3)
Product
List
Product
Category
ASI4517R3v18
DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-16i/16i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
4 x (1695 - 2690) (LBy1/LTy2/RBy3/RTy4)
880 - 960
Polarization
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
0 - 10 , continuously adjustable , each band
separately
Electrical downtilt (°)
at mid Tilt
over all Tilts
2 - 12 , continuously adjustable , each band
separately
14.9
15.5
15.8
16.0
14.7 ±0.5
15.3 ±0.5
15.6 ±0.5
15.8 ±0.5
at mid Tilt
Gain (dBi) Bottom
over all Tilts
15.5
15.9
16.4
16.7
15.4 ±0.5
15.8 ±0.5
16.3 ±0.4
16.6 ±0.6
at mid Tilt
Top
15.0
15.4
15.7
16.2
14.9 ±0.6
15.3 ±0.6
15.6 ±0.5
16.1 ±0.5
> 16
> 17
> 16
> 17
> 16
63 ±5
62 ±5
61 ±5
60 ±5
Bottom
10.4 ±0.6
9.4 ±0.5
8.1 ±0.3
7.4 ±0.3
Top
9.7 ±0.6
8.9 ±0.5
7.9 ±0.3
7.1 ±0.3
over all Tilts
Side lobe suppression for first side lobe
above main beam (dB)
> 16
> 17
68 ±4
63 ±3
61 ±3
60 ±3
10.5 ±0.9
9.5 ±0.8
9.2 ±0.7
8.5 ±0.7
Horizontal 3dB beam width (°)
Vertical 3dB beam
width (°)
> 16
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 22
> 25
> 25
> 24
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 20
> 20
> 20
> 20
> 20
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)
Max. effective power whole antenna (W)
250 (at 50℃ ambient temperature)
1000 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
1999 x 429 x 196
Packing dimensions (H x W x D) (mm)
2270 x 515 x 235
Antenna weight (kg)
68
(669)
Antenna dimensions (H x W x D) (mm)
33.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
47.5 (Included clamps)
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1999
50 - 115
Radome material
1273
Mast diameter supported (mm)
Frontal:
555 (at 150 km/h)
Lateral:
340 (at 150 km/h)
Maximum: 735 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
250
Connector
57
Survival wind speed (km/h)
12 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Downtilt kit
Model
Description
ASMDT0H01 Mechanical downtilt: 0 - 12°
Weight
Units per antenna
3.1 kg
1 (Separate packing)
164
Product
List
Product
Category
ASI4517R3v18
DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-16i/16i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.7 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
c
Integrated RET S/N:
d
a HWxxxx……LBy1
b HWxxxx……LTy2
c HWxxxx……...Lr1
f
a
d HWxxxx...…RTy4
e HWxxxx...…RBy3
e
f HWxxxx…..…Rr2
r - Red
R - Right array
y – Yellow
T - Top array
y2
y4
y1
y3
r1
r2
L - Left array
B - Bottom array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(LBy1/RBy3)
165
1695 - 2690 MHz
(LTy2/RTy4)
Product
List
Product
Category
ASI4518R10v18
DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-17i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
4 x (1695 - 2690) (LBy1/LTy2/RBy3/RTy4)
824 - 894
880 - 960
Polarization
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
0 - 10 , continuously adjustable , each band separately 2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
at mid Tilt
over all Tilts
15.8
16.5
16.7
17.0
15.5 ±0.5
16.3 ±0.5
16.5 ±0.5
16.7 ±0.5
at mid Tilt
Gain (dBi) Bottom
over all Tilts
16.6
17.0
17.2
17.6
16.4 ±0.6
16.8 ±0.5
17.0 ±0.5
17.4 ±0.5
16.6
17.0
17.2
17.6
16.4 ±0.6
16.8 ±0.5
17.0 ±0.5
17.4 ±0.5
at mid Tilt
Top
over all Tilts
Side lobe suppression for first side lobe
above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
> 16
> 17
> 17
> 17
> 16
> 16
> 16
> 16
68 ±5
65 ±5
62 ±5
60 ±5
65 ±5
63 ±5
61 ±5
60 ±5
8.8 ±0.7
8.0 ±0.6
7.8 ±0.5
7.5 ±0.5
7.0 ±0.7
6.0 ±0.5
5.5 ±0.4
5.0 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
> 23
> 26
> 26
> 26
> 26
> 27
> 27
> 28
> 17
> 18
> 19
> 20
> 15
> 16
> 17
> 17
500 (at 50℃ ambient temperature)
Max. effective power whole antenna
(W)
250 (at 50℃ ambient temperature)
1200 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
Antenna dimensions (H x W x D) (mm)
2769 x 429 x 196
Packing dimensions (H x W x D) (mm)
2985 x 515 x 240
Antenna weight (kg)
41.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(925)
Mechanical Properties
62 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1787
2769
Mast diameter supported (mm)
Frontal:
805 (at 150 km/h)
Lateral:
495 (at 150 km/h)
Maximum: 1060 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
12 x 4.3-10 Female
Bottom
57
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8 °
3.1 kg
1 (Separate packing)
166
Product
List
Product
Category
ASI4518R10v18
DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-17i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.7 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
c
Integrated RET S/N:
d
a HWxxxx……LTy2
b HWxxxx……LBy1
y2
y4
y1
y3
r1
r2
c HWxxxx……...Lr1
a
f
d HWxxxx...…RBy3
e
e HWxxxx...…RTy4
f HWxxxx…..…Rr2
r - Red
y – Yellow
L - Left array
R - Right array T - Top array B - Bottom array
Pattern sample for reference
1695 - 2690 MHz
(LBy1/LTy2/RBy3/RTy4)
690 - 960 MHz
(Lr1/Rr2)
167
Product
List
Product
Category
ASI4518R14v18
DXXXXXX-690-960/690-960/1695-2200/1695-2200/2490-2690/2490-269065/65/65/65/65/65-14.5i/14.5i/17i/17i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
2 x (1695 - 2200) (Lb1/Rb2) 2 x (2490 - 2690)
(Ly1/Ry2)
1695 - 1990 1920 - 2200
880 - 960
Polarization
+45° , -45°
0 - 14 , continuously adjustable , each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
13.8
over all Tilts 13.7 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
14.2
14.4
14.5
16.7
16.9
17.8
14.1 ±0.5
14.3 ±0.5
14.4 ±0.5
16.5 ±0.5
16.8 ±0.5
17.6 ±0.5
> 17
> 17
> 16
> 16
> 16
> 16
> 15
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12 , continuously adjustable , each band
separately
66 ±5
63 ±5
62 ±5
60 ±5
65 ±5
63 ±5
60 ±5
15.3 ±1.2
14.0 ±1.1
13.3 ±1.0
12.2 ±0.8
6.5 ±0.7
5.8 ±0.5
5.0 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 24
> 24
> 25
> 26
> 27
> 27
Cross polar ratio (dB)
> 16
> 18
> 19
> 20
> 15
> 16
> 18
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)
Max. effective power whole
antenna (W)
250 (at 50℃ ambient temperature)
960 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Antenna dimensions (H x W x D) (mm)
1499 x 429 x 196
Packing dimensions (H x W x D) (mm)
1740 x 515 x 250
Antenna weight (kg)
68
(66)
Mechanical Properties
28.8
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
40.4 (Included clamps)
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1376
50 - 115
Radome material
-40 .. +65
1499
Mast diameter supported (mm)
Frontal:
410 (at 150 km/h)
Lateral:
245 (at 150 km/h)
Maximum: 540 (at 150 km/h)
Wind load (N)
200
Survival wind speed (km/h)
57
Max. operational wind speed (km/h)
250
Connector
12 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 16 °
2.1 kg
1 (Separate packing)
168
Product
List
Product
Category
ASI4518R14v18
DXXXXXX-690-960/690-960/1695-2200/1695-2200/2490-2690/2490-269065/65/65/65/65/65-14.5i/14.5i/17i/17i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.7 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 50 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
NC
NC
RS-485B
NC
RS-485A
DC
DC return
NC
Lightning protection (kA)
8 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
b
c
Integrated RET S/N:
d
a HWxxxx……Ly1
y1
y2
b HWxxxx……Lb1
c HWxxxx……Lr 1
f
a
d HWxxxx……Rb2
e
e HWxxxx……Ry2
f HWxxxx……Rr 2
r - Red
L - Left array
y - Yellow
R - Right array
b1
b2
r1
r2
b - Blue
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2200 MHz
(Lb1/Rb2)
169
2490 - 2690 MHz
(Ly1/Ry2)
Product
List
Product
Category
ASI4518R33v06
DXXXXXX-690-862/880-960/1427-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-16.5i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 – 862 (r1)
Frequency range (MHz)
690 - 803
Polarization
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all
Tilts
Side lobe suppression for first
side lobe above main beam (dB)
790 - 862
1427 – 2690 (RBy3)
880 – 960
(r2)
1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
+45° , -45°
2 - 12, continuously adjustable ,
each band separately
2 - 12 , continuously adjustable
15.9
16.3
17.0
15.9
17.3
17.5
17.8
18.1
15.8 ±0.5
16.0 ±0.5
16.7 ±0.5
15.8 ±0.5
17.1 ±0.5
17.2 ±0.5
17.5 ±0.4
17.6 ±0.5
>15
>15
>16
> 15
> 17
> 17
> 15
> 16
Horizontal 3dB beam width (°)
67 ±1.5
66 ±2.6
60 ±2.3
73 ±6.0
69 ±5.5
68 ±5.7
63 ±4.7
58 ±4.0
Vertical 3dB beam width (°)
9.2 ±0.8
8.6 ±1.3
7.3 ±0.5
8.0 ±0.4
6.5 ±0.6
5.9 ±0.5
5.1 ±0.4
4.8 ±0.4
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30°(dB)
> 23
> 24
> 25
> 22
> 23
> 23
> 27
> 24
Cross polar ratio (dB)
> 18
> 19
> 20
> 18
> 22
> 21
> 21
> 17
0°
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
3 x (1695 - 2690) (LBy1/CBy2/RTy4)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
Gain (dBi)
Top
2490 - 2690
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Botto
m
2200 - 2490
+45° , -45°
at mid Tilt
over all Tilts
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
17.3
17.5
18.1
18.2
17.1 ±0.5
17.3 ±0.5
17.9 ±0.4
18.0 ±0.5
16.8
17.1
17.6
18.0
16.5 ±0.5
16.9 ±0.5
17.4 ±0.4
17.7 ±0.5
> 17
> 17
> 17
> 17
Horizontal 3dB beam width (°)
66 ±4.7
66 ±5.2
60 ±5.3
58 ±5.1
Vertical 3dB beam width (°)
6.6 ±0.6
6.0 ±0.5
5.2 ±0.5
4.8 ±0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio, ±30°(dB)
> 25
> 27
> 27
> 26
Cross polar ratio (dB)
> 22
> 20
> 19
> 22
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
170
Product
List
Product
Category
ASI4518R33v06
DXXXXXX-690-862/880-960/1427-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-16.5i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.6m
68
Antenna dimensions (H x W x D) (mm)
2769 x 369 x 149
Packing dimensions (H x W x D) (mm)
2965 x 435 x 240
Antenna weight (kg)
41.5
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(801)
Mechanical Properties
62.8 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1900
2769
Mast diameter supported (mm)
-40 .. +65
Frontal:
845 (at 150 km/h)
Lateral:
280 (at 150 km/h)
Maximum: 1015 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
12 x 4.3-10 Female
Bottom
68
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8°
3.1 kg
1 (Separate packing)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
171
Product
List
Product
Category
ASI4518R33v06
DXXXXXX-690-862/880-960/1427-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-16.5i/17i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.6m
Integrated RET S/N:
r2
HWxxxx……CBy2
HWxxxx……LBy1
y4
HWxxxx………..r1
HWxxxx……RBy3
HWxxxx……RTy4
HWxxxx…….....r2
r - Red
y – Yellow
L - Left array R - Right array
B - Bottom array
y1
y2
y3
r1
C - Center array
T - Top array
Pattern sample for reference
690 - 862 MHz (r1)
880 - 960 MHz (r2)
1695 - 2690 MHz (RTy4)
1427 - 2690 MHz (RBy3)
1695 - 2690 MHz (LBy1/CBy2)
172
Product
List
Product
Category
ASI4518R41v06
DXXXXXX-690-862/880-960/1427-2690/1695-2200/2490-2690/1695-269065/65/65/65/65/65-14i/14.5i/17.5i/17i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
690 - 862 (r1)
Frequency range (MHz)
690 - 803
Polarization
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
790 - 862
1427 - 2690 (Ry3)
880 - 960
(r2)
1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
+45° , -45°
2 - 16, continuously adjustable ,
each band separately
2 - 12 , continuously adjustable
13.8
14.2
14.6
15.8
17.3
17.5
17.8
18.1
13.7 ±0.5
14.1 ±0.5
14.5 ±0.6
15.7 ±0.5
17.1 ±0.5
17.3 ±0.5
17.5 ±0.4
17.7 ±0.4
> 15
> 15
> 16
> 15
> 17
> 17
> 16
> 16
66 ±3.0
64 ±2.8
61 ±3.5
74 ±6.0
69 ±4.5
68 ±5.2
63 ±4.7
59 ±4.0
14.7 ±1.2
13.1 ±0.6
12.3 ±0.5
8.0 ±0.4
6.5 ±0.5
5.9 ±0.5
5.2 ±0.4
4.8 ±0.4
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30°(dB)
> 22
> 23
> 24
> 22
> 24
> 26
> 26
> 24
Cross polar ratio (dB)
> 21
> 22
> 22
> 19
> 20
> 20
> 20
> 17
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1695 - 2200 (b1)
Frequency range (MHz)
1695 - 1990
1920 - 2200
1695 - 2690 (Cy2)
2490 2690 (Ly1)
Polarization
1695 1990
1920 2200
2200 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
16.9
17.2
17.8
17.3
17.5
17.9
18.0
16.7 ±0.5
17.0 ±0.6
17.8 ±0.5
17.1 ±0.5
17.3 ±0.5
17.7 ±0.4
17.8 ±0.5
> 16
> 18
> 16
> 16
> 16
> 17
> 17
Horizontal 3dB beam width (°)
68 ±5.2
66 ±5.0
58 ±4.5
64 ±5.0
62 ±6.0
58 ±5.3
58 ±5.1
Vertical 3dB beam width (°)
6.5 ±0.5
5.9 ±0.5
4.7 ±0.3
6.5 ±0.6
5.8 ±0.5
5.3 ±0.4
4.7 ±0.3
Gain (dBi)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio, ±30°(dB)
> 24
> 27
> 26
> 27
> 28
> 28
> 27
Cross polar ratio (dB)
> 22
> 22
> 20
> 22
> 19
> 17
> 21
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
173
Product
List
Product
Category
ASI4518R41v06
DXXXXXX-690-862/880-960/1427-2690/1695-2200/2490-2690/1695-269065/65/65/65/65/65-14i/14.5i/17.5i/17i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.4m
Antenna dimensions (H x W x D) (mm)
1499 x 369 x 149
Packing dimensions (H x W x D) (mm)
1790 x 435 x 240
Antenna weight (kg)
28.0
Clamps weight (kg)
4.2 (2 units)
40.8 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1381
Mast diameter supported (mm)
1499
Antenna packing weight (kg)
68
(58)
Mechanical Properties
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
60
Frontal:
720 (at 150 km/h)
Lateral:
140 (at 150 km/h)
Rear side: 715 (at 150 km/h)
Wind load (N)
12 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Downtilt kit
Model
Description
ASMDT0D01 Mechanical downtilt: 0 - 16°
Weight
Units per antenna
2.1 kg
1 (Separate packing)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
174
Product
List
Product
Category
ASI4518R41v06
DXXXXXX-690-862/880-960/1427-2690/1695-2200/2490-2690/1695-269065/65/65/65/65/65-14i/14.5i/17.5i/17i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 1.4m
Integrated RET S/N:
r2
HWxxxx……Ly1
y1
HWxxxx……..b1
HWxxxx……..r1
HWxxxx……Cy2
HWxxxx……Ry3
b1
HWxxxx……..r2
r - Red
C - Center array
y2
y3
r1
y - Yellow
L - Left array
b - Blue
R - Right array
Pattern sample for reference
690 - 862 MHz
(r1)
1695 - 2200 MHz
(b1)
880 - 960 MHz
(r2)
1427 - 2690 MHz
(Ry3)
2490 - 2690 MHz
(Ly1)
1695 - 2690 MHz
(Cy2)
175
Product
List
Product
Category
ASI4518R32v06
DXXXXXX-690-862/880-960/1427-2690/1695-2690/1695-2200/2490-269065/65/65/65/65/65-15i/15.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 – 862 (r1)
Frequency range (MHz)
690 - 803
Polarization
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
1427 – 2690 (Ry3)
880 – 960
(r2)
1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
790 - 862
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.2
15.5
15.8
15.9
17.3
17.5
17.8
18.1
15.1 ±0.5
15.3 ±0.5
15.7 ±0.5
15.8 ±0.5
17.1 ±0.5
17.2 ±0.5
17.5 ±0.4
17.6 ±0.5
> 15
> 15
> 17
> 15
> 17
> 17
> 16
> 16
67 ±2.5
65 ±2.6
61 ±2.3
73 ±6.0
69 ±5.5
68 ±5.7
63 ±4.7
58 ±4.0
11.3 ±0.6
10.0 ±0.6
8.8 ±0.4
8.0 ±0.4
6.5 ±0.5
5.9 ±0.5
5.1 ±0.4
4.8 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
< 1.5
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 23
> 25
> 25
> 22
> 24
> 24
> 27
> 25
Cross polar ratio (dB)
> 22
> 22
> 22
> 19
> 22
> 21
> 20
> 17
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1695 – 2690 (Cy2)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
1695 – 2200 (b1)
2490 - 2690
1695 - 1990
+45° , -45°
1920 - 2200
2490 – 2690
(Ly1)
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
2200 - 2490
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
17.3
17.5
18.0
18.2
16.9
17.3
18.0
17.1 ±0.5
17.3 ±0.5
17.8 ±0.4
18.0 ±0.6
16.8 ±0.5
17.1 ±0.5
17.7 ±0.5
> 17
> 17
> 16
> 16
> 17
> 18
> 17
Horizontal 3dB beam width (°)
65 ±4.8
64 ±6.0
58 ±6.8
58 ±6.9
67 ±4.2
66 ±4.6
58 ±4.4
Vertical 3dB beam width (°)
6.5 ±0.5
5.9 ±0.5
5.1 ±0.4
4.8 ±0.3
6.5 ±0.5
5.9 ±0.4
4.8 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30 (dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
≥ 28
> 27
> 28
> 27
> 27
> 24
> 26
> 25
> 21
> 21
> 17
> 22
> 22
> 22
> 21
250 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
50
50
DC Ground
DC Ground
* Max. effective power whole antenna : 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
176
Product
List
Product
Category
ASI4518R32v06
DXXXXXX-690-862/880-960/1427-2690/1695-2690/1695-2200/2490-269065/65/65/65/65/65-15i/15.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Mechanical Properties
1999 x 369 x 149
Packing dimensions (H x W x D) (mm)
2265 x 435 x 240
Antenna weight (kg)
33.2
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(535)
Antenna dimensions (H x W x D) (mm)
50.1 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1999
50 - 115
1404
Mast diameter supported (mm)
Frontal:
580 (at 150 km/h)
Lateral:
195 (at 150 km/h)
Maximum: 700 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
12 x 4.3-10 Female
Connector position
60
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
177
Product
List
Product
Category
ASI4518R32v06
DXXXXXX-690-862/880-960/1427-2690/1695-2690/1695-2200/2490-269065/65/65/65/65/65-15i/15.5i/17.5i/17.5i/17i/17.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Integrated RET S/N:
HWxxxx……..b1
r2
HWxxxx……Ly1
y1
HWxxxx……..r1
HWxxxx……Cy2
y2
HWxxxx……Ry3
b1
HWxxxx……..r2
r - Red
C - Center array
y - Yellow
L - Left array
y3
r1
b - Blue
R - Right array
Pattern sample for reference
690 - 862 MHz
(r1)
880 - 960 MHz
(r2)
1427 - 2690 MHz
(Ry3)
1695 - 2690 MHz
(Cy2)
1695 - 2200 MHz
(b1)
2490 - 2690 MHz
(Ly1)
178
Product
List
Product
Category
AHP4517R12v06
D7X-2x(690-960)/2x(1427-1518)/3x(1695-2690)-7x6514.5i/14.5i/15.5i/15.5i/17i/17i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.5m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
1695 - 2690 (Cy2)
690 - 803 790 - 862 824 - 894 880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45°
2 - 16 , continuously adjustable ,
each band separately
Electrical downtilt (°)
Gain (dBi)
2 - 12 , continuously adjustable ,
each band separately
at mid Tilt
13.7
14.0
14.1
14.3
17.3
17.6
17.6
17.7
over all Tilts
13.6
±0.5
14.0
±0.5
14.1
±0.5
14.2
±0.5
17.2 ±0.5
17.4 ±0.5
17.5 ±0.5
17.6 ±0.5
> 16
> 16
> 16
> 16
> 17
> 18
> 18
> 18
69 ±6
68 ±5
66 ±5
65 ±5
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.4 ±1.5 14.0 ±0.9 13.5 ±0.9 12.7 ±0.8
62 ±5
62 ±5
60 ±5
59 ±6
7.0 ±0.5
6.3 ±0.5
5.7 ±0.4
5.2 ±0.3
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 26
≥ 26
Front to back ratio , ±30° (dB)
> 20
> 21
> 22
> 22
> 26
> 26
> 26
> 26
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 17
> 17
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690) (Ly1/Ry3)
2 x (1427 - 1518)
(Lg1/Rg2)
Frequency range (MHz)
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable,
each band separately
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
2 - 12 , continuously adjustable, each band separately
15.5
16.8
17.1
17.2
17.3
15.3 ±0.7
16.7 ±0.5
16.9 ±0.5
17.0 ±0.5
17.1 ±0.5
> 15
> 16
> 17
> 16
> 16
70 ±6
64 ±5
65 ±5
64 ±5
58 ±5
9.2 ±0.5
7.4 ±0.5
6.5 ±0.5
5.8 ±0.3
5.2 ±0.4
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 26
≥ 26
Front to back ratio , ±30° (dB)
> 24
> 26
> 26
> 26
> 24
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
200 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 700 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
179
Product
List
Product
Category
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1509 x 469 x 206
Packing dimensions (H x W x D) (mm)
1760 x 555 x 250
Antenna weight (kg)
68
(67)
AHP4517R12v06
D7X-2x(690-960)/2x(1427-1518)/3x(1695-2690)-7x6514.5i/14.5i/15.5i/15.5i/17i/17i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.5m
36.5
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
49.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Fiberglass
1383
1509
Radome material
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
445 (at 150 km/h)
Lateral:
265 (at 150 km/h)
Maximum: 590 (at 150 km/h)
Wind load (N)
200
Survival wind speed (km/h)
59
Max. operational wind speed (km/h)
250
Connector
14x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Downtilt kit
Model
Description
ASMDT0H01 Mechanical downtilt: 0 - 16°
Weight
Units per antenna
3.1 kg
1 (Separate packing)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
180
Product
List
Product
Category
AHP4517R12v06
D7X-2x(690-960)/2x(1427-1518)/3x(1695-2690)-7x6514.5i/14.5i/15.5i/15.5i/17i/17i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.5m
Integrated RET S/N:
HWxxxx……Lr1
HWxxxx……Lg1
y1
y3
HWxxxx……Ly1
HWxxxx……Cy2
HWxxxx……Ry3
HWxxxx……Rg2
g1
r1
y2
g2
r2
g HWxxxx……Rr2
r - Red
L - Left array
y - Yellow
R - Right array
g - Green
C - Center array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 1518 MHz
(Lg1/Rg2)
1695 - 2690 MHz
(Ly1/Ry3)
1695 - 2690 MHz
(Cy2)
181
Product
List
Product
Category
AHP4517R7v06
D7X-2x(690-960)/2x(1427-1518)/3x(1695-2690)-7x6516i/16i/15.5i/15.5i/17i/17i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
1695 - 2690 (Cy2)
690 - 803 790 - 862 824 - 894 880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45°
0 - 10 , continuously adjustable ,
each band separately
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
14.8
15.3
15.5
2 - 12 , continuously adjustable
15.9
14.7 ±0.5 15.2 ±0.5 15.4 ±0.5 15.7 ±0.5
> 16
> 17
67 ±5
64 ±5
11.0 ±0.7 10.0 ±0.5
> 17
> 16
17.3
17.6
17.6
17.7
17.2 ±0.5
17.4 ±0.5
17.5 ±0.5
17.6 ±0.5
> 17
> 18
> 17
> 18
64 ±5
63 ±5
62 ±5
62 ±5
60 ±5
59 ±5
9.4 ±0.5
8.8 ±0.5
7.0 ±0.5
6.3 ±0.5
5.5 ±0.3
5.1 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 26 (690 - 788 // 690 - 788) ≥ 28 (others)
Front to back ratio , ±30° (dB)
> 21
> 23
> 23
> 24
> 26
> 26
> 26
> 26
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 17
> 17
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1427 - 1518)
(Lg1/Rg2)
Frequency range (MHz)
1427 - 1518
2 x (1695 - 2690) (Ly1/Ry3)
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.5
16.8
17.1
17.2
17.3
15.3 ±0.7
16.7 ±0.5
16.9 ±0.5
17 ±0.5
17.1 ±0.5
> 16
> 17
> 17
> 16
> 16
70 ±6
64 ±5
65 ±5
62 ±5
58 ±5
9.2 ±0.5
7.4 ±0.5
6.5 ±0.5
5.8 ±0.3
5.2 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 24
> 26
> 27
> 27
> 24
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
≥ 28
200 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
182
Product
List
Product
Category
AHP4517R7v06
D7X-2x(690-960)/2x(1427-1518)/3x(1695-2690)-7x6516i/16i/15.5i/15.5i/17i/17i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m
Mechanical Properties
2099 x 449 x 196
Packing dimensions (H x W x D) (mm)
2360 x 535 x 240
Antenna weight (kg)
68
(635)
Antenna dimensions (H x W x D) (mm)
37.0
Clamps weight (kg)
6.3 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2099
50.5 (Included clamps)
1405
Antenna packing weight (kg)
Frontal:
615 (at 150 km/h)
Lateral:
375 (at 150 km/h)
Maximum: 810 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
14 x 4.3-10 Female
Bottom
59
Connector position
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Downtilt kit
Model
Description
ASMDT0H01 Mechanical downtilt: 0 - 16°
Weight
Units per antenna
3.1 kg
1 (Separate packing)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
183
Product
List
Product
Category
AHP4517R7v06
D7X-2x(690-960)/2x(1427-1518)/3x(1695-2690)-7x6516i/16i/15.5i/15.5i/17i/17i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m
Integrated RET S/N:
HWxxxx……Lr1
HWxxxx……Lg1
y1
y3
HWxxxx……Ly1
HWxxxx……Cy2
HWxxxx……Ry3
HWxxxx……Rg2
g1
r1
y2
g2
r2
g HWxxxx……Rr2
r - Red
L - Left array
y - Yellow
R - Right array
g - Green
C - Center array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 1518 MHz
(Lg1/Rg2)
1695 - 2690 MHz
(Cy2)
1695 - 2690 MHz
(Ly1/Ry3)
184
Product
List
Product
Category
AHP4518R5v06
D7X-690-960/690-960/1427-2690/4x(1695-2690)-7x6517i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
824 - 894
790 - 862
Polarization
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
880 - 960
+45° , -45°
over all Tilts
15.8
16.4
16.7
16.9
15.6 ±0.5
16.3 ±0.5
16.5 ±0.5
16.7 ±0.5
> 15
> 16
> 16
> 16
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
70 ±5
69 ±4
68 ±3
64 ±4
9.0 ±0.5
8.0 ±0.4
7.7 ±0.5
7.2 ±0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 24
> 24
> 25
Cross polar ratio (dB)
> 20
> 22
> 22
> 22
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1427 – 2690 (Cy3)
Frequency range (MHz)
1427 1518
1695 1990
Polarization
over all Tilts
Top
1695 1990
1920 2200
2200 2490
2490 2690
+45° , -45°
16.2
17.3
17.4
17.9
18.0
16.1 ±0.5 17.2 ±0.5 17.3 ±0.5 17.8 ±0.5 17.9 ±0.5
at mid Tilt
16.6
over all Tilts
17.0
17.2
17.7
16.5 ±0.5 16.9 ±0.5 17.1 ±0.5 17.5 ±0.5
at mid Tilt
16.7
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
17.1
17.2
17.7
16.6 ±0.5 17.0 ±0.5 17.1 ±0.5 17.5 ±0.5
> 16
> 16
> 16
> 16
> 16
61 ±5
61 ±5
59 ±4
58 ±4
Bottom
7.6 ±0.5
6.7 ±0.4
6.0 ±0.3
5.4 ±0.3
Top
6.5 ±0.5
5.8 ±0.4
5.2 ±0.3
4.8 ±0.3
Horizontal 3dB beam width (°)
Vertical 3dB beam
width (°)
2490 2690
2 - 12 , continuously adjustable , each band separately
at mid Tilt
Bottom
4 x (1695 - 2690) (LBy1/LTy2/RBy4/RTy5)
2200 2490
+45° , -45°
Electrical downtilt (°)
Gain
(dBi)
1920 2200
> 15
> 17
> 17
> 17
62 ±7
61 ±7
62 ±6
58 ±5
58 ±5
7.9 ±0.4
6.6 ±0.4
5.8 ±0.3
5.2 ±0.3
4.8 ±0.2
VSWR
< 1.5
< 1.5
< 1.5
≥ 28
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 25
> 28
> 28
> 28
> 28
> 25
> 25
> 25
> 26
Cross polar ratio (dB)
> 15
> 17
> 18
> 16
> 15
> 20
> 18
> 17
> 18
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
≥ 28
250 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
185
Product
List
Product
Category
AHP4518R5v06
D7X-690-960/690-960/1427-2690/4x(1695-2690)-7x6517i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.6m
106
Antenna dimensions (H x W x D) (mm)
2769 x 469 x 206
Packing dimensions (H x W x D) (mm)
3024 x 535 x 285
Antenna weight (kg)
51.2
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(823)
Mechanical Properties
76.5 (Included clamps)
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
860 (at 150 km/h)
Lateral:
535 (at 150 km/h)
Maximum: 1140 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
2769
50 - 115
Radome material
1873
Mast diameter supported (mm)
200
Survival wind speed (km/h)
250
Connector
14 x 4.3-10 Female
Bottom
73
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8°
3.1 kg
1 (Separate packing)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
186
Product
Product
List
Product
Product
Category
AHP4518R5v06
D7X-690-960/690-960/1427-2690/4x(1695-2690)-7x6517i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.6m
Integrated RET S/N:
HWxxxx……...Lr1
HWxxxx……LBy1
y2
y5
HWxxxx……LTy2
g
HWxxxx……..Cy3
HWxxxx……RBy4
HWxxxx………Rr2
g
y1
r1
y3
y4
r2
HWxxxx……RTy5
r - Red
C - Center array
B - Bottom array
y – Yellow
R - Right array
L - Left array
T - Top array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(Cy3)
1695 - 2690 MHz
(LBy1/RBy4)
1695 - 2690 MHz
(LTy2/RTy5)
187
Product
List
Product
Category
AHP4518R3v06
D7X-690-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6514.5i/14.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
824 - 894
790 - 862
Polarization
+45° , -45°
0 - 14 , continuously adjustable ,
each band separately
Electrical downtilt (°)
Gain (dBi)
880 - 960
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
13.7
14.3
14.6
14.8
13.6 ±0.5
14.2 ±0.5
14.5 ±0.5
14.7 ±0.5
> 17
> 17
> 17
> 17
70 ±5
70 ±4
69 ±4
65 ±4
15.4 ±1.2
13.7 ±0.7
13.3 ±0.7
12.5 ±0.7
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 23
> 24
> 24
Cross polar ratio (dB)
> 22
> 22
> 22
> 22
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2200) (Lb1/Rb2)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable ,
each band separately
Electrical downtilt (°)
Gain (dBi)
2 x (2490 - 2690) (Ly1/Ry3)
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.9
17.3
17.6
16.8 ±0.5
17.2 ±0.5
17.5 ±0.5
> 17
> 17
> 17
62 ±6
60 ±5
58 ±4
6.5 ±0.5
5.9 ±0.4
4.7 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 26
> 26
> 28
Cross polar ratio (dB)
> 20
> 20
> 18
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
188
Product
List
Product
Category
AHP4518R3v06
D7X-690-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6514.5i/14.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.4m
Electrical Properties
1427 – 2690 (Cy2)
Frequency range (MHz)
1427 - 1518
1695 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all
Tilts
16.2
17.3
17.4
17.9
18.0
16.1 ±0.5
17.2 ±0.5
17.3 ±0.5
17.8 ±0.5
17.9 ±0.5
> 15
> 17
> 17
> 17
> 16
Side lobe suppression for first
side lobe above main beam
(dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
62 ±7
61 ±7
62 ±6
58 ±5
58 ±5
7.9 ±0.4
6.6 ±0.4
5.8 ±0.3
5.2 ±0.3
4.8 ±0.2
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 25
> 28
> 27
> 27
> 27
Cross polar ratio (dB)
> 15
> 17
> 18
> 17
> 15
0°
≥ 28
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Antenna dimensions (H x W x D) (mm)
1499 x 469 x 206
Packing dimensions (H x W x D) (mm)
1870 x 535 x 285
Antenna weight (kg)
36.2
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
68
(59)
Mechanical Properties
54 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1383
1499
Mast diameter supported (mm)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
57
Frontal:
440 (at 150 km/h)
Lateral:
265 (at 150 km/h)
Maximum: 585 (at 150 km/h)
Wind load (N)
14 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Downtilt kit
Model
Description
ASMDT0H01 Mechanical downtilt: 0 - 16°
Weight
Units per antenna
3.1 kg
1 (Separate packing)
189
Product
List
Product
Category
AHP4518R3v06
D7X-690-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6514.5i/14.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Lr1
HWxxxx……Lb1
y3
y1
HWxxxx……Ly1
HWxxxx……Ry3
g
HWxxxx……Rb2
HWxxxx……Rr2
g
HWxxxx……Cy2
r - Red
L - Left array
B - Bottom array
190
y – Yellow
R - Right array
Product
List
b1
r1
y2
b2
r2
C - Center array
T - Top array
Product
Category
AHP4518R3v06
D7X-690-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6514.5i/14.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.4m
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(Cy2)
1695 - 2200 MHz
(Lb1/Rb2)
2490 - 2690 MHz
(Ly1/Ry3)
191
Product
List
Product
Category
AHP4518R4v07
D7X-690-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6516i/16i/17.5i/17i/17i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 – 803
790 - 862
824 - 894
880 - 960
Polarization
2 x (2490 - 2690)
(Ly1/Ry3)
1695 - 1990 1920 - 2200
2490 - 2690
+45° , -45°
2 - 14 , continuously adjustable ,
each band separately
Electrical downtilt (°)
Gain (dBi)
2 x (1695 - 2200)
(Lb1/Rb2)
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12 , continuously adjustable ,
each band separately
14.7
15.3
15.5
15.7
16.9
17.3
17.7
14.6 ±0.5
15.2 ±0.5
15.3 ±0.6
15.5 ±0.6
16.8 ±0.5
17.2 ±0.5
17.6 ±0.5
> 16
> 17
> 17
> 16
> 17
> 17
> 17
70 ±5
69 ±5
68 ±5
65 ±5
63 ±6
61 ±5
58 ±4
11.0 ±0.8
9.8 ±0.5
9.5 ±0.5
8.8 ±0.5
6.5 ±0.5
5.9 ±0.4
4.7 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 21
> 23
> 24
> 24
> 27
> 27
> 28
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
> 20
> 20
> 18
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1427 - 2690 (Cy2)
Frequency range (MHz)
1427 - 1518
1695 - 1990
1920 - 2200
Polarization
2490 - 2690
2 - 12 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
2200 - 2490
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.2
17.3
17.4
17.9
18.0
16.1 ±0.5
17.2 ±0.5
17.3 ±0.5
17.8 ±0.5
17.9 ±0.5
> 15
> 16
> 17
> 16
> 16
62 ±7
61 ±7
62 ±6
58 ±5
58 ±5
7.9 ±0.4
6.6 ±0.4
5.8 ±0.3
5.2 ±0.3
4.8 ±0.2
> 28
> 28
> 28
> 17
> 16
> 15
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 26
> 28
Cross polar ratio (dB)
> 15
> 16
0°
≥ 28
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
192
Product
List
Product
Category
AHP4518R4v07
D7X-690-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6516i/16i/17.5i/17i/17i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m
Mechanical Properties
1999 x 469 x 206
Packing dimensions (H x W x D) (mm)
2255 x 535 x 285
Antenna weight (kg)
42.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
106
(506)
Antenna dimensions (H x W x D) (mm)
61.5 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1420
1999
Mast diameter supported (mm)
-40 .. +65
Frontal:
600 (at 150 km/h)
Lateral:
365 (at 150 km/h)
Maximum: 795 (at 150 km/h)
Wind load (N)
200
Survival wind speed (km/h)
73
Max. operational wind speed (km/h)
250
Connector
14 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Downtilt kit
Model
Description
ASMDT0H01 Mechanical downtilt: 0 - 12 °
Weight
Units per antenna
3.1 kg
1 (Separate packing)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
193
Product
List
Product
Category
AHP4518R4v07
D7X-690-960/690-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6516i/16i/17.5i/17i/17i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m
Integrated RET S/N:
HWxxxx……Lr1
HWxxxx……Lb1
y1
y3
HWxxxx……Ly1
HWxxxx……Ry3
g
HWxxxx……Rb2
HWxxxx……Rr2
g
y2
b1
r1
b2
r2
HWxxxx……Cy2
r - Red
L - Left array
y - Yellow
R - Right array
b - Blue
C - Center array
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2200 MHz
(Lb1/Rb2)
2490 - 2690 MHz
(Ly1/Ry3)
1427 - 2690 MHz
(Cy2)
194
Product
List
Product
Category
AHP4517R2v06
D7X-690-862/880-960/1427-2690/4x(1695-2690)-7x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 - 862 (r1)
Frequency range (MHz)
690 - 803
Polarization
Electrical downtilt (°)
at mid Tilt
790 - 862
1427 - 2690 (RBy4)
880 - 960
(r2)
1427 1518
1695 1990
1920 2200
2200 2490
+45° , -45°
+45° , -45°
2 - 12, continuously adjustable ,
each band separately
2 - 12 , continuously adjustable
2490 2690
15.9
16.3
17.0
15.9
17.3
17.5
17.8
18.1
15.8 ±0.5
16.0 ±0.5
16.7 ±0.5
15.8 ±0.5
17.1 ±0.5
17.2 ±0.5
17.5 ±0.4
17.6 ±0.5
> 15
> 15
> 16
> 15
> 17
> 17
> 15
> 16
Horizontal 3dB beam width (°)
67 ±1.5
66 ±2.6
60 ±2.3
73 ±6.0
69 ±5.5
68 ±5.7
63 ±4.7
58 ±4.0
Vertical 3dB beam width (°)
9.2 ±0.8
8.6 ±1.3
7.3 ±0.5
8.0 ±0.4
6.5 ±0.6
5.9 ±0.5
5.1 ±0.4
4.8 ±0.4
Gain (dBi)
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30°(dB)
> 23
> 24
> 25
> 22
> 23
> 23
> 27
> 24
Cross polar ratio (dB)
> 18
> 19
> 22
> 20
> 22
> 21
> 22
> 17
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
4 x (1695 - 2690) (LBy1/LTy2/Cy3/RTy5)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Bottom
Gain (dBi)
Top
at mid Tilt
over all Tilts
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
17.3
17.5
18.1
18.2
17.1 ±0.5
17.3 ±0.5
17.9 ±0.4
18.0 ±0.5
16.8
17.1
17.6
18.0
16.5 ±0.5
16.9 ±0.5
17.4 ±0.4
17.7 ±0.5
> 17
> 17
> 18
> 17
Horizontal 3dB beam width (°)
66 ±4.7
66 ±5.2
60 ±5.3
58 ±5.1
Vertical 3dB beam width (°)
6.6 ±0.6
6.0 ±0.5
5.2 ±0.5
4.8 ±0.4
> 27
> 27
> 26
> 20
> 19
> 23
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio, ±30°(dB)
> 25
Cross polar ratio (dB)
> 23
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
195
Product
List
Product
Category
AHP4517R2v06
D7X-690-862/880-960/1427-2690/4x(1695-2690)-7x65AHP4517R2v06
16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.6m
68
Antenna dimensions (H x W x D) (mm)
2769 x 369 x 149
Packing dimensions (H x W x D) (mm)
2965 x 435 x 240
Antenna weight (kg)
43.7
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(808)
Mechanical Properties
65 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
845 (at 150 km/h)
Lateral:
280 (at 150 km/h)
Maximum: 1015 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2769
Fiberglass
1901
Radome material
14 x 4.3-10 Female
Bottom
60
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8 °
3.1 kg
1 (Separate packing)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
196
Product
List
Product
Category
AHP4517R2v06
D7X-690-862/880-960/1427-2690/4x(1695-2690)-7x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.6m
Integrated RET S/N:
HWxxxx……LTy2
HWxxxx……LBy1
HWxxxx……Cy3
r2
y2
y5
HWxxxx……RBy4
HWxxxx……RTy5
g
y1
y3
y4
HWxxxx……...r2
g
HWxxxx……...r1
r - Red
C - Center array
T - Top array
y - Yellow
L - Left array
B - Bottom array
r1
b - Blue
R - Right array
Pattern sample for reference
690 - 862 MHz (r1)
880 - 960 MHz (r2)
1695 - 2690 MHz (LBy1)
1427 - 2690 MHz (RBy4)
1695 - 2690 MHz (LTy2/RTy5)
197
Product
List
Product
Category
AHP4517R1v06
D7X-690-862/880-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6514i/14.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
690 - 862 (r1)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
1427 - 2690 (Ry3)
880 - 960
(r2)
1427 1518
1695 1990
1920 2200
2200 2490
+45° , -45°
+45° , -45°
2 - 16, continuously adjustable ,
each band separately
2 - 12 , continuously adjustable
13.8
14.3
14.7
15.9
17.3
17.5
17.8
18.1
13.8 ±0.5
14.2 ±0.5
14.6 ±0.5
15.8 ±0.5
17.1 ±0.5
17.2 ±0.5
17.5 ±0.4
17.6 ±0.5
> 15
> 15
> 16
> 15
> 17
> 17
> 15
> 16
68 ±2.7
66 ±4.3
60 ±3.5
73 ±6.0
69 ±5.5
68 ±5.7
63 ±4.7
58 ±4.0
14.9 ±1.4
13.0 ±0.8
12.2 ±0.6
8.0 ±0.4
6.5 ±0.6
5.9 ±0.5
5.1 ±0.4
4.8 ±0.4
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
2490 2690
> 22
> 23
> 25
> 22
> 17
> 18
> 19
> 20
400 (at 50℃ ambient temperature)*
≥ 28
> 23
> 23
> 27
> 24
> 22
> 21
> 22
> 17
250 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1695 - 2200 (Rb2)
Frequency range (MHz)
1695 - 1990
Polarization
Electrical downtilt (°)
2490 - 2690
(Cy2)
1695 - 2200 (Lb1)
1695 - 1990
1920 - 2200
2490 - 2690
(Ly1)
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable , each band
separately
2 - 12 , continuously adjustable , each band
separately
16.8
17.0
17.7
16.9
17.3
18.0
16.6 ±0.5
16.8 ±0.5
17.5± 0.5
16.8 ±0.5
17.1 ±0.5
17.7 ± 0.5
> 16
> 16
> 17
> 17
> 16
> 16
Horizontal 3dB beam width (°)
65 ±6.0
64 ±6.0
58 ±5.0
67 ±4.0
66 ±4.0
58 ±4.0
Vertical 3dB beam width (°)
6.5 ±0.5
5.9 ±0.5
4.8 ±0.3
6.5 ±0.5
5.9 ±0.4
4.8 ±0.2
Gain (dBi)
at mid Tilt
1920 - 2200
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30 (dB)
> 26
> 27
> 25
> 24
> 27
> 26
Cross polar ratio (dB)
> 22
> 21
> 22
> 22
> 21
> 21
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -150 (2 x 43 dBm carrier)
50
50
DC Ground
DC Ground
Impedance (Ω)
Grounding
* Max. effective power whole antenna : 700 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
198
Product
List
Product
Category
AHP4517R1v06
D7X-690-862/880-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6514i/14.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.4m
Max. operational wind speed (km/h)
Survival wind speed (km/h)
Connector
Connector position
1499
1381
68
60
Wind load (N)
1499 x 369 x 149
1790 x 435 x 240
30.0
4.2 (2 units)
40.8 (Included clamps)
50 - 115
Fiberglass
Light grey
-40 .. +65
Frontal:
425 (at 150 km/h)
Lateral:
140 (at 150 km/h)
Maximum: 510 (at 150 km/h)
200
250
14 x 4.3-10 Female
Bottom
(58)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
Packing dimensions (H x W x D) (mm)
Antenna weight (kg)
Clamps weight (kg)
Antenna packing weight (kg)
Mast diameter supported (mm)
Radome material
Radome colour
Operational temperature (℃)
Accessories
Item
Downtilt kit
Model
Description
ASMDT0D01 Mechanical downtilt: 0 - 16 °
Weight
Units per antenna
2.1 kg
1 (Separate packing)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
RET protocols*
Input voltage range (V)
Power consumption (W)
Adjustment time (full range) (s)
RET connector
Pin assignment according AISG
Lightning protection (kA)
1
DC
Integrated RET
AISG 2.0 / 3GPP
10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
2
3
4
5
6
7
n/c
RS-485B
n/c
RS-485A
DC
DC return
2.5 (10/350 μs)
10 (8/20 μs)
8
n/c
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Ly1
HWxxxx……Lb1
r2
y1
y2
HWxxxx……Cy2
HWxxxx……Rb2
g
HWxxxx……Ry3
HWxxxx……...r2
g HWxxxx……...r1
r - Red
C - Center array
199
b1
y3
b2
r1
b1
y - Yellow
L - Left array
b - Blue
R - Right array
Product
List
Product
Category
AHP4517R1v06
D7X-690-862/880-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6514i/14.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 1.4m
Pattern sample for reference
690 - 862 MHz
(r1)
880 - 960 MHz
(r2)
1695 - 2200 MHz
(Lb1)
1427 - 2690 MHz
(Ry3)
1695 - 2200 MHz
(Rb2)
2490 - 2690 MHz
(Ly1)
2490 - 2690 MHz
(Cy2)
200
Product
List
Product
Category
AHP4517R0v07
D7X-690-862/880-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6515i/15.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 – 862 (r1)
Frequency range (MHz)
690 - 803
Polarization
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
1427 – 2690 (Ry3)
880 – 960
(r2)
1427 - 15181695 - 19901920 - 22002200 - 24902490 - 2690
790 - 862
over all
Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.2
15.5
15.8
16.1
17.4
17.5
17.8
18.1
15.1 ±0.5
15.3 ±0.5
15.7 ±0.5
16.0
±0.5
17.2 ±0.5
17.3
±0.5
17.5
±0.4
17.6
±0.5
> 15
> 15
> 17
> 15
> 17
> 17
> 16
> 16
67 ±2.5
65 ±2.5
61 ±2.5
73 ±6.0
68 ±5.5
65 ±6.7
63 ±4.7
58 ±4.0
11.6 ±0.8
10.3 ±0.8
9.0 ±0.5
8.1 ±0.5
6.7 ±0.6
6.0 ±0.6
5.1 ±0.4
4.8 ±0.3
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 23
> 26
> 26
> 22
> 25
> 25
> 27
> 25
Cross polar ratio (dB)
> 22
> 22
> 22
> 19
> 22
> 21
> 20
> 17
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient
temperature)*
250 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1695 - 2200 (Rb2)
Frequency range (MHz)
1695 - 1990
Polarization
1920 - 2200
2490 - 2690
(Cy2)
1695 - 2200 (Lb1)
1695 - 1990
+45° , -45°
1920 - 2200
2490 - 2690
(Ly1)
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
17.1
17.4
17.9
17.2
17.5
18.0
16.9 ±0.5
17.2 ±0.5
17.7 ±0.5
17.0 ±0.5
17.4 ±0.4
17.9 ±0.5
> 17
> 18
> 17
> 18
> 18
> 16
Horizontal 3dB beam width (°)
67 ±6.8
62 ±7.0
58 ±6.9
67 ±4.2
64 ±4.6
60 ±4.4
Vertical 3dB beam width (°)
6.4 ±0.6
5.8 ±0.4
4.8 ±0.4
6.4 ±0.5
5.8 ±0.5
4.8 ±0.4
Gain (dBi)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 27
> 27
> 26
> 24
> 27
> 26
Cross polar ratio (dB)
> 21
> 21
> 22
> 22
> 22
> 21
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -150 (2 x 43 dBm carrier)
50
50
DC Ground
DC Ground
Impedance (Ω)
Grounding
* Max. effective power whole antenna : 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
201
Product
List
Product
Category
AHP4517R0v07
D7X-690-862/880-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6515i/15.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m
Mechanical Properties
Max. operational wind speed (km/h)
Survival wind speed (km/h)
Connector
Connector position
(535)
Accessories
Item
Downtilt kit
Model
Description
ASMDT0D01 Mechanical downtilt: 0 - 12°
Weight
Units per antenna
2.1 kg
1 (Separate packing)
1999
1404
Wind load (N)
68
1999 x 369 x 149
2265 x 435 x 240
35.0
4.2 (2 units)
51.9 (Included clamps)
50 - 115
Fiberglass
Light grey
-40 .. +65
Frontal:
580 (at 150 km/h)
Lateral:
195 (at 150 km/h)
Maximum: 700 (at 150 km/h)
200
250
14 x 4.3-10 Female
Bottom
60
Antenna dimensions (H x W x D) (mm)
Packing dimensions (H x W x D) (mm)
Antenna weight (kg)
Clamps weight (kg)
Antenna packing weight (kg)
Mast diameter supported (mm)
Radome material
Radome colour
Operational temperature (℃)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
RET protocols*
Input voltage range (V)
Power consumption (W)
Adjustment time (full range) (s)
RET connector
Pin assignment according AISG
Lightning protection (kA)
1
DC
Integrated RET
AISG 2.0 / 3GPP
10 - 30 DC
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
2
3
4
5
6
7
n/c
RS-485B
n/c
RS-485A
DC
DC return
2.5 (10/350 μs)
10 (8/20 μs)
8
n/c
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Ly1
HWxxxx……Lb1
HWxxxx……Cy2
r2
y1
y2
b1
b2
r1
HWxxxx……Rb2
g
HWxxxx……Ry3
HWxxxx……...r2
g
HWxxxx……...r1
r - Red
C - Center array
202
y - Yellow
L - Left array
Product
List
y3
b - Blue
R - Right array
Product
Category
AHP4517R0v07
D7X-690-862/880-960/1427-2690/2x(1695-2200)/2x(2490-2690)-7x6515i/15.5i/17.5i/17i/17i/17.5i/17.5i-7xM-R
EasyRET 2L5H 14-Port Antenna with 7 Integrated RCUs - 2.0m
Pattern sample for reference
690 - 862 MHz
(r1)
880 - 960 MHz
(r2)
1695 - 2200 MHz
(Lb1)
1427 - 2690 MHz
(Ry3)
1695 - 2200 MHz
(Rb2)
2490 - 2690 MHz
(Ly1)
2490 - 2690 MHz
(Cy2)
203
Product
List
Product
Category
AOC4518R11v06
D8X-617-894/617-894/1695-2200/1695-2200/2490-2690/2490-2690/16952690/1695-2690-8x65-15.5i/15.5i/16i/16i/17i/17i/17.5i/17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (617 - 894) (Lr1/Rr2)
Frequency range (MHz)
617 - 698
698 - 798
2 x (1695 - 2690) (Ly1/Ry4)
814 - 894
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45°
2 - 12 , continuously adjustable, each
band separately
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12, continuously adjustable, each band separately
14.3
14.9
15.4
17.0
17.2
17.6
18.0
14.1 ±0.5
14.8 ±0.4
15.2 ±0.5
16.9 ±0.5
17.2 ±0.5
17.5 ±0.5
17.9 ±0.5
> 15
> 16
> 16
> 15
> 15
> 16
> 16
69 ±5
67 ±5
63 ±6
65 ±6
62 ±5
61 ±5
60 ±6
13.1 ±1.3
10.9 ±1
9.6 ±0.8
7.4 ±0.6
6.6 ±0.5
5.8±0.4
5.3 ±0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 21
> 21
> 22
> 24
> 24
> 25
> 25
Cross polar ratio (dB)
> 17
> 17
> 18
> 17
> 17
> 17
> 18
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2200) (Lb1/Rb2)
Frequency range (MHz)
1695 - 1990
Polarization
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
2 x (2490 - 2690) (CLy2/CRy3)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.5
16.9
17.4
16.4 ±0.5
16.8 ±0.5
17.2 ±0.5
> 15
> 16
> 16
66 ±6
63 ±5
58 ±6
7.9 ±0.7
7.0 ±0.6
5.4 ±0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 24
> 24
> 25
Cross polar ratio (dB)
> 17
> 17
> 18
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
204
Product
List
Product
Category
AOC4518R11v06
D8X-617-894/617-894/1695-2200/1695-2200/2490-2690/2490-2690/16952690/1695-2690-8x65-15.5i/15.5i/16i/16i/17i/17i/17.5i/17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Mechanical Properties
2099 x 499 x 206
Packing dimensions (H x W x D) (mm)
2360 x 550 x 245
Antenna weight (kg)
46.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(604)
106
Antenna dimensions (H x W x D) (mm)
59.7 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1420
2099
Mast diameter supported (mm)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
75
Frontal:
895 (at 150 km/h)
Lateral:
425 (at 150 km/h)
Maximum: 1075 (at 150 km/h)
Wind load (N)
16 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 12°
3.1 kg
1 (Separate packing)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
205
Product
List
Product
Category
AOC4518R11v06
D8X-617-894/617-894/1695-2200/1695-2200/2490-2690/2490-2690/16952690/1695-2690-8x65-15.5i/15.5i/16i/16i/17i/17i/17.5i/17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Integrated RET S/N:
HWxxxx………Lr1
HWxxxx……...Ly1
HWxxxx……...Lb1
y2
y3
b1
b2
HWxxxx……CLy2
h
HWxxxx……..Rb2
g
HWxxxx……..Ry4
y1
g HWxxxx……...Rr2
h
r1
y4
r2
HWxxxx…….CRy3
r - Red
C - Center array
y - Yellow
L - Left array
b-Blue
R - Right array
Pattern sample for reference
617 - 894 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(Ly1/Ry4)
1695- 2200 MHz
(Lb1/Rb2)
2490 - 2690 MHz
(CLy2/CRy3)
206
Product
List
Product
Category
AOC4518R21v06
D08X-2x690-960/2x1427-2690/4x1695-2690-8x652x15.5i/2x17i/4x17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with Integrated RCUs - 2.0m
Preliminary Issue
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
4 x (1695 - 2690)
824 - 894
1695 1990
880 - 960
1920 2200
2200 2490
2490 2690
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable, each band
separately
2 - 12 , continuously adjustable, each band
separately
14.9
15.1
15.3
15.4
15.6
16.3
16.6
17.4
14.8 ±0.6 15.0 ±0.5 15.2 ±0.5 15.3 ±0.6 15.5 ±0.7 16.2 ±0.7 16.5 ±0.6 17.2 ±0.7
> 15
> 16
> 16
70 ±7
69 ±6
10.9 ±0.8 10.0 ±0.7
> 16
> 15
> 16
> 16
> 16
67 ±6
63 ±6
69 ±7
65 ±6
63 ±6
58 ±6
9.7 ±0.7
9.0 ±0.5
10.1 ±1.0
8.8 ±0.9
7.9 ±0.9
6.9 ±0.8
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 26
≥ 26
Interband isolation (dB)
≥ 26
≥ 26
Front to back ratio , ±30° (dB)
> 21
> 21
> 22
> 22
> 22
> 23
> 24
> 23
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 16
> 16
> 16
> 17
0°
Max. power per input (W)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
50
50
DC Ground
DC Ground
Impedance (Ω)
Grounding
Electrical Properties
2 x (1427 - 2690)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
14.6
15.5
16.2
16.5
17.2
14.4 ±0.8
15.4 ±0.6
16.1±0.6
16.4±0.6
17.0±0.7
> 15
> 15
> 16
> 16
> 16
70 ±8
69 ±6
66 ±6
62 ±6
59 ±7
12.1 ±1.2
10.0 ±1.0
8.8 ±0.9
7.9 ±0.9
6.9 ±0.8
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 26
Interband isolation (dB)
≥ 25
≥ 26
Front to back ratio , ±30° (dB)
> 23
> 24
> 24
> 24
> 24
Cross polar ratio (dB)
> 16
> 16
> 16
> 16
> 17
0°
Max. power per input (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 1600 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
207
Product
List
Product
Category
AOC4518R21v06
D08X-2x690-960/2x1427-2690/4x1695-2690-8x652x15.5i/2x17i/4x17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with Integrated RCUs - 2.0m
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2099 x 469 x 206
Packing dimensions (H x W x D) (mm)
2365 x 555 x 255
Antenna weight (kg)
44.5
Clamps weight (kg)
5.8 (2 units)
Antenna packing weight (kg)
60.4 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
630 (at 150 km/h)
Lateral:
390 (at 150 km/h)
Maximum: 835 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
16 x 4.3-10 Female
Connector position
Bottom
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt: 0 - 12 °
3.1 kg
1 (Separate packing)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
208
Product
List
Product
Category
AOC4518R19v06
D08X-2x690-960/2x1427-2690/4x1695-2690-8x652x16.5i/2x17i/4x17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
880 - 960
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
824 - 894
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.6
15.9
16.1
16.3
15.5 ±0.5
15.8 ±0.5
16.0 ±0.5
16.1 ±0.6
> 15
> 16
> 16
> 15
70 ±7
67 ±6
65 ±6
62 ±6
8.8 ±0.8
8.1 ±0.6
7.8 ±0.5
7.3 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 27
Front to back ratio , ±30° (dB)
> 21
> 22
> 22
> 22
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1427 - 2690) (LTy3/RTy5)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.5
16.7
17.1
17.3
17.5
15.4 ±0.6
16.6 ±0.5
17.0 ±0.5
17.2 ±0.5
17.4 ±0.5
> 15
> 15
> 16
> 16
> 15
70 ±7
66 ±6
65 ±6
64 ±6
58 ±6
8.9 ±0.6
7.2 ±0.6
6.5 ±0.6
5.7 ±0.4
5.2 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 27
≥ 27
Front to back ratio , ±30° (dB)
> 23
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 16
> 17
> 17
> 17
> 16
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
209
Product
List
Product
Category
AOC4518R19v06
D08X-2x690-960/2x1427-2690/4x1695-2690-8x652x16.5i/2x17i/4x17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m
Electrical Properties
2 x (1695 - 2690) (CLBy2/CRBy4)
Frequency range (MHz)
2 x (1695 - 2690) (LBy1/RBy6)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45°
2 - 12 , continuously adjustable, each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
2 - 12 , continuously adjustable, each band
separately
16.9
17.3
17.5
17.7
16.8
17.2
17.5
17.7
16.8 ±0.5
17.2 ±0.5
17.4 ±0.5
17.6 ±0.5
16.7 ±0.5
17.1 ±0.5
17.4 ±0.5
17.6 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 16
> 16
> 16
> 15
> 15
> 16
> 16
> 15
Horizontal 3dB beam width (°)
69 ±6
66 ±6
60 ±6
58 ±6
70 ±7
67 ±6
64 ±6
58 ±6
7.1 ±0.6
6.4 ±0.6
5.7 ±0.4
5.2 ±0.4
7.1 ±0.6
6.4 ±0.5
5.7 ±0.4
5.2 ±0.4
Vertical 3dB beam width (°)
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 27
≥ 27
Front to back ratio , ±30° (dB)
> 25
> 25
> 25
> 25
> 24
> 25
> 25
> 24
Cross polar ratio (dB)
> 17
> 17
> 17
> 16
> 17
> 17
> 17
> 16
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
106
Antenna dimensions (H x W x D) (mm)
2769 x 469 x 206
Packing dimensions (H x W x D) (mm)
2980 x 555 x 255
Antenna weight (kg)
46.5
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(809)
Mechanical Properties
64 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Light grey
-40 .. +65
1885
Operational temperature (℃)
Frontal:
860 (at 150 km/h)
Lateral:
535 (at 150 km/h)
Maximum: 1140 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
16 x 4.3-10 Female
Connector position
75
Connector
2769
Radome colour
Bottom
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8°
3.1 kg
1 (Separate packing)
210
Product
List
Product
Category
AOC4518R19v06
D08X-2x690-960/2x1427-2690/4x1695-2690-8x652x16.5i/2x17i/4x17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx………Lr1
HWxxxx……...Ly1
HWxxxx……...Lb1
y2
y3
b1
b2
HWxxxx……CLy2
h
HWxxxx……..Rb2
g
HWxxxx……..Ry4
y1
g HWxxxx……...Rr2
h
r2
HWxxxx…….CRy3
r - Red
C - Center array
211
r1
y4
y - Yellow
L - Left array
Product
List
b-Blue
R - Right array
Product
Category
AOC4518R19v06
D08X-2x690-960/2x1427-2690/4x1695-2690-8x652x16.5i/2x17i/4x17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(LBy1/RBy6)
1427 - 2690 MHz
(LTy3/RTy5)
1695 - 2690 MHz
(CLBy2/CRBy4)
212
Product
List
Product
Category
AOC4518R07v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x652x14.5i/2x18i/2x17.5i/2x18i-8xM-R
EasyRET 2L6H 16-Port Antenna with Integrated RCUs - 1.5m
Preliminary Issue
Electrical Properties
Frequency range (MHz)
2 x (690 - 960)
2 x (1427 - 2690)
1427 - 1518
2 - 16
Electrical downtilt (°)
Gain (dBi)
1695 - 2690
2 x (1695 - 2200) 2 x (2490 - 2690)
2 - 12
2 - 12
2 - 12
14.3
15.7
18.0
17.2
17.9
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
15
15
16
16
16
Horizontal 3dB beam width (°)
69
70
65
66
60
13.5
8.9
6.0
7.0
5.3
Vertical 3dB beam width (°)
VSWR
< 1.5
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 25
Typ. 17
0°
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1509 x 469 x 206
Packing dimensions (H x W x D) (mm)
1765 x 545 x 255
Antenna net weight (kg)
36.5
Mechanical downtilt (°)
0 - 16
Connector
16 x 4.3-10 Female
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
213
Product
List
Product
Category
AOC4518R04v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x652x15.5i/2x17.5i/2x17.5i/2x18i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (1695 - 2200)
(Lb1/Rb2)
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
880 - 960
Polarization
1920 - 2200
+45° , -45°
2 - 14 , continuously adjustable, each band
separately
Electrical downtilt (°)
Gain (dBi)
1695 - 1990
2 x (2490 - 2690)
(Ly1/Ry4)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 11 , continuously adjustable, each band
separately
14.7
14.9
15.1
15.3
17.2
17.7
18.3
14.7 ±0.6
14.9 ±0.5
15.1 ±0.5
15.3 ±0.6
17.2 ±0.7
17.7 ±0.7
18.3 ±0.6
> 15
> 16
> 16
> 15
> 15
> 15
> 15
70 ±7
69 ±6
68 ±6
66 ±6
70 ±7
65 ±6
58 ±6
11.0 ±0.8
10.1 ±0.8
9.7 ±0.7
9.0 ±0.7
6.2 ±0.6
5.6 ±0.6
4.5 ±0.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 27
≥ 27
Front to back ratio , ±30° (dB)
> 21
> 22
> 22
> 22
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 17
> 17
> 16
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
50
50
DC Ground
DC Ground
Electrical Properties
2 x (1427 - 2690) (CLy2/CRy3)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
VSWR
15.5
17.0
17.3
17.5
17.8
15.5 ±0.7
16.9 ±0.5
17.2 ±0.5
17.4 ±0.5
17.7 ±0.5
> 15
> 16
> 16
> 16
> 15
70 ±8
69 ±6
65 ±6
60 ±6
58 ±6
8.9 ±0.6
7.1 ±0.6
6.4 ±0.6
5.7 ±0.5
5.2 ±0.4
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 26
≥ 27
Interband isolation (dB)
≥ 26
≥ 27
Front to back ratio , ±30° (dB)
> 24
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 17
> 17
> 17
> 17
> 16
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 1200 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
214
Product
List
Product
Category
AOC4518R04v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x652x15.5i/2x17.5i/2x17.5i/2x18i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Mechanical Properties
2009 x 469 x 206
Packing dimensions (H x W x D) (mm)
2265 x 555 x 255
Antenna weight (kg)
37.5
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
106
(567)
Antenna dimensions (H x W x D) (mm)
53.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
1383
2009
Frontal:
605 (at 150 km/h)
Lateral:
370 (at 150 km/h)
Maximum: 800 (at 150 km/h)
Wind load (N)
200
Survival wind speed (km/h)
250
16 x 4.3-10 Female
Connector position
59
Connector
Bottom
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 12°
3.1 kg
1 (Separate packing)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
215
Product
List
Product
Category
AOC4518R04v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x652x15.5i/2x17.5i/2x17.5i/2x18i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Integrated RET S/N:
HWxxxx……LTy2
HWxxxx……LBy1
HWxxxx……….r1
HWxxxx……CBy3
HWxxxx…...RBy5
HWxxxx…...RTy6
g HWxxxx……CTy4
h HWxxxx………..r2
g
h
r2
y2
y4
y6
y1
y3
y5
r1
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(CLy2/CRy3)
1695 - 2200 MHz
(Lb1/Rb2)
2490 - 2690 MHz
(Ly1/Ry4)
216
Product
List
Product
Category
AOC4517R1v06
D8X-690-862/880-960/6x(1695-2690)-8x6515i/15.5i/16.5i/16.5i/16.5i/16i/16i/16i-8xM-R
EasyRET 2L6H 12-Port Antenna with 8 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 - 862 (r1)
Frequency range (MHz)
690 - 803
Polarization
+45° , -45°
2 - 12, continuously adjustable, each band separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
880 - 960 (r2)
790 - 862
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.0
15.2
15.5
14.9 ±0.5
15.1 ±0.5
15.4 ±0.5
> 15
> 15
> 16
65 ±3
65 ±3
62 ±3
11.2 ±1.0
10.0 ±0.8
9.0 ±0.7
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30°(dB)
> 23
> 25
> 25
Cross polar ratio (dB)
> 20
> 20
> 20
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690) (LBy1/RBy5)
Frequency range (MHz)
1695 1990
1920 2200
2200 2490
Polarization
1695 1990
1920 2200
2200 2490
2490 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
2 x (1695 - 2690) (LTy2/RTy6)
2490 2690
at mid Tilt
15.6
over all Tilts
16.0
16.1
16.5
15.1
15.5
15.7
16.0
15.4 ±0.6 15.8 ±0.6 16.0 ±0.6 16.3 ±0.6 14.9 ±0.6 15.3 ±0.6 15.5 ±0.6 15.8 ±0.6
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
> 16
> 16
> 16
> 16
> 15
> 16
> 16
> 16
66 ±6
66 ±6
60 ±6
60 ±8
66 ±6
66 ±6
60 ±6
60 ±8
10.4 ±1.0
9.4 ±0.9
8.1 ±0.8
7.4 ±0.7
10.1 ±1.0
9.1 ±0.9
8.0 ±0.8
7.2 ±0.7
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio, ±30°(dB)
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
217
Product
List
Product
Category
AOC4517R1v06
D8X-690-862/880-960/6x(1695-2690)-8x6515i/15.5i/16.5i/16.5i/16.5i/16i/16i/16i-8xM-R
EasyRET 2L6H 12-Port Antenna with 8 Integrated RCUs - 2.0m
Electrical Properties
1695 - 2690 (CBy3)
Frequency range (MHz)
1695 1990
1920 2200
1695 - 2690 (CTy4)
2200 2490
2490 2690
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
Electrical downtilt (°)
Gain (dBi)
1695 1990
2 - 12 , continuously adjustable, each band separately
at mid Tilt
over all Tilts
15.6
15.9
16.2
16.5
15.0
15.4
15.6
16.0
15.4 ±0.6
15.7 ±0.6
16.0 ±0.6
16.3 ±0.6
14.9 ±0.6
15.2 ±0.6
15.5 ±0.6
15.8 ±0.6
> 16
> 16
> 16
> 16
> 16
> 16
> 16
> 16
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
66 ±6
65 ±6
60 ±6
60 ±8
66 ±6
65 ±6
60 ±6
60 ±6
9.8 ±0.9
8.8 ±0.8
7.8 ±0.6
7.0 ±0.6
10.1 ±1.0
9.1 ±0.9
8.0 ±0.8
7.2 ±0.7
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio, ±30°(dB)
> 25
> 25
> 25
> 25
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
Antenna dimensions (H x W x D) (mm)
1999 x 369 x 149
Packing dimensions (H x W x D) (mm)
2265 x 435 x 240
Antenna weight (kg)
36.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(535)
Mechanical Properties
56.5 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1999
50 - 115
1404
Mast diameter supported (mm)
Frontal:
580 (at 150 km/h)
Lateral:
195 (at 150 km/h)
Maximum: 700 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
16 x 4.3-10 Female
Bottom
60
Connector position
Accessories
Item
Downtilt kit
Model
Description
ASMDT0H01 Mechanical downtilt: 0 - 12°
Weight
Units per antenna
3.1 kg
1 (Separate packing)
218
Product
List
Product
Category
AOC4517R1v06
D8X-690-862/880-960/6x(1695-2690)-8x6515i/15.5i/16.5i/16.5i/16.5i/16i/16i/16i-8xM-R
EasyRET 2L6H 12-Port Antenna with 8 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
c
d
Integrated RET S/N:
e
a HWxxxx……….Lr1
b HWxxxx………Lb1
b
f
c
HWxxxx………Ly1
d HWxxxx…...CLy2
y4
y1
e HWxxxx……..Ry4
f HWxxxx……..Rb2
h
g
a
g HWxxxx………Rr2
h HWxxxx……CRy3
r - Red
L - Left array
219
y2
b1
r1
y3
b2
r2
y - Yellow
C - Center array
b- Blue
R - Right array
Product
List
Product
Category
AOC4517R1v06
D8X-690-862/880-960/6x(1695-2690)-8x6515i/15.5i/16.5i/16.5i/16.5i/16i/16i/16i-8xM-R
EasyRET 2L6H 12-Port Antenna with 8 Integrated RCUs - 2.0m
Pattern sample for reference
690 - 862 MHz
(r1)
880 - 960 MHz
(r2)
1695 - 2690 MHz
(LBy1/RBy5)
1695 - 2690 MHz
(LTy2/RTy6)
1695 - 2690 MHz
(CBy3)
1695 - 2690 MHz
(CTy4)
220
Product
List
Product
Category
AOC4518R3v06
D8X-690-862/880-960/1427-2690/5x(1695-2690)-8x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 – 862 (r1)
Frequency range (MHz)
690 - 803
Polarization
790 - 862
880 – 960
(r2)
1427 – 2690 (RBy5)
1427 1518
1695 1990
1920 2200
+45° , -45°
2490 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
2200 2490
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
15.9
16.3
17.0
15.9
17.3
15.8 ±0.5 16.0 ±0.5 16.7 ±0.5 15.8 ±0.5
17.5
17.8
18.1
17.1 ±0.5 17.2 ±0.5 17.5 ±0.4 17.6 ±0.5
>15
>15
>16
> 15
> 17
> 17
> 15
> 16
Horizontal 3dB beam width (°)
67 ±1.5
66 ±2.6
60 ±2.3
73 ±6.0
69 ±5.5
68 ±5.7
63 ±4.7
58 ±4.0
Vertical 3dB beam width (°)
9.2 ±0.8
8.6 ±1.3
7.3 ±0.5
8.0 ±0.4
6.5 ±0.6
5.9 ±0.5
5.1 ±0.4
4.8 ±0.4
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30°(dB)
> 23
> 24
> 25
> 22
> 23
> 23
> 27
> 24
Cross polar ratio (dB)
> 18
> 19
> 22
> 20
> 22
> 21
> 22
> 17
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient
temperature)*
250 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
5 x (1695 - 2690) (LBy1/LTy2/CBy3/CTy4/RTy6)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Bottom
Gain (dBi)
Top
at mid Tilt
over all Tilts
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
17.3
17.5
18.1
18.2
17.1 ±0.5
17.3 ±0.5
17.9 ±0.4
18.0 ±0.5
16.8
17.1
17.6
18.0
16.5 ±0.5
16.9 ±0.5
17.4 ±0.4
17.7 ±0.5
> 17
> 17
> 18
> 17
Horizontal 3dB beam width (°)
66 ±4.7
66 ±5.2
60 ±5.3
58 ±5.1
Vertical 3dB beam width (°)
6.6 ±0.6
6.0 ±0.5
5.2 ±0.5
4.8 ±0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio, ±30°(dB)
> 25
> 27
> 27
> 26
Cross polar ratio (dB)
> 23
> 20
> 19
>23
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
221
Product
List
Product
Category
AOC4518R3v06
D8X-690-862/880-960/1427-2690/5x(1695-2690)-8x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m
Mechanical Properties
68
Antenna dimensions (H x W x D) (mm)
2769 x 369 x 149
Packing dimensions (H x W x D) (mm)
2965 x 435 x 240
46.7
Clamps weight (kg)
(808)
Antenna weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
68 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
845 (at 150 km/h)
Lateral:
280 (at 150 km/h)
Maximum: 1015 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
2769
Fiberglass
1901
Radome material
200
Survival wind speed (km/h)
250
16 x 4.3-10 Female
Connector position
60
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8°
3.1 kg
1 (Separate packing)
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The
protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor
defined command. For more details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
222
Product
List
Product
Category
AOC4518R3v06
D8X-690-862/880-960/1427-2690/5x(1695-2690)-8x6516.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.6m
Integrated RET S/N:
r2
HWxxxx……LTy2
HWxxxx……LBy1
y2
y4
y6
y1
y3
y5
HWxxxx……CBy3
h
HWxxxx………..r1
g
HWxxxx……RBy5
r1
HWxxxx……RTy6
g HWxxxx………..r2
h HWxxxx……CTy4
r - Red
b - Blue
L - Left array
T - Top array
y - Yellow
C - Center array
R - Right array
B - Bottom array
Pattern sample for reference
690 - 862 MHz (R1)
880 - 960 MHz (R2)
1695 - 2690 MHz (LTy2/CTy4/RTy6)
223
1427 - 2690 MHz (RBy5)
1695 - 2690 MHz (LBy1/CBy3)
Product
List
Product
Category
A104518R05v06
D10X-2x690-960/2x1427-2690/2x1695-2690/2x1427-2690/2x1695-269010x65-2x15.5i/2x17.5i/2x17.5i/2x17i/2x17i-10xM-R
EasyRET 2L8H 20-Port Antenna with Integrated RCUs - 2.0m
Preliminary Issue
Electrical Properties
Frequency range (MHz)
1427 - 1518
2 - 12
Electrical downtilt (°)
Gain (dBi)
4 x (1427 - 2690)
2 x (690 - 960)
TOP
2 - 12
15.3
BOT
1695 - 2690
4 x (1695 - 2690)
2 - 12
14.7
17.2
17.2
14.9
17.5
17.5
Side lobe suppression for first
side lobe above main beam (Typ.)
(dB)
15
15
16
16
Horizontal 3dB beam width (°)
68
72
65
66
Vertical 3dB beam width (°)
9.5
11.0
7.5
7.5
VSWR
< 1.5
Front to back ratio, copolar (dB)
Typ. 25
Cross polar ratio (dB)
Typ. 17
0°
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2099 x 469 x 206
Packing dimensions (H x W x D) (mm)
2380 x 560 x 260
Antenna net weight (kg)
49
Mechanical downtilt (°)
0-8
Connector
20 x 4.3-10 Female
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
224
Product
List
Product
Category
A104518R1v06
D10X-2x690-960/2x1427-2690/2x1695-2690/2x1427-2690/2x1695-269010x65-16.5i/16.5i/17.5i/17.5i/17.5i/17.5i/17i/17i/17i/17i-10xM-R
EasyRET 2L8H 20-Port Antenna with 10 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
Polarization
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
880 - 960
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.6
15.9
16.1
16.3
15.5 ±0.5
15.8 ±0.5
16.0 ±0.5
16.1 ±0.6
> 15
> 16
> 16
> 15
70 ±7
68 ±6
67 ±6
65 ±6
8.7 ±0.6
8.0 ±0.6
7.6 ±0.5
7.1 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 27
Front to back ratio , ±30° (dB)
> 21
> 22
> 22
> 22
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. effective power per port
(W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1427 - 2690) (CLBy3/CRBy5)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.8
16.9
17.1
17.2
17.5
15.7 ±0.5
16.8 ±0.5
17.0 ±0.5
17.1 ±0.5
17.4 ±0.5
> 15
> 16
> 16
> 16
> 15
70 ±7
69 ±6
67 ±6
60 ±6
58 ±6
8.9 ±0.5
7.1 ±0.6
6.3 ±0.6
5.6 ±0.3
5.2 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 27
≥ 27
Front to back ratio , ±30° (dB)
> 23
> 25
> 25
> 25
> 24
Cross polar ratio (dB)
> 16
> 17
> 17
> 17
> 16
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
225
Product
List
Product
Category
A104518R1v06
D10X-2x690-960/2x1427-2690/2x1695-2690/2x1427-2690/2x1695-269010x65-16.5i/16.5i/17.5i/17.5i/17.5i/17.5i/17i/17i/17i/17i-10xM-R
EasyRET 2L8H 20-Port Antenna with 10 Integrated RCUs - 2.6m
Electrical Properties
2 x (1427 - 2690) (CLTy4/CRTy6)
Frequency range (MHz)
1427 - 1518
1695 - 1990
1920 - 2200
Polarization
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
2200 - 2490
at mid Tilt
over all Tilts
15.5
16.6
16.8
16.9
17.2
15.4 ±0.5
16.5 ±0.5
16.7 ±0.5
16.8 ±0.5
17.1 ±0.5
> 15
> 15
> 16
> 16
> 15
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
70 ±7
69 ±6
66 ±6
60 ±6
58 ±6
8.9 ±0.5
7.2 ±0.6
6.4 ±0.5
5.6 ±0.4
5.2 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 27
Front to back ratio , ±30° (dB)
> 23
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 16
> 17
> 17
> 17
> 16
0°
≥ 27
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690) (LBy1/RBy7)
Frequency range (MHz)
Polarization
+45° , -45°
2 - 12 , continuously adjustable, each band
separately
Electrical downtilt (°)
Gain (dBi)
2 x (1695 - 2690) (LTy2/RTy8)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam
(dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12 , continuously adjustable, each band
separately
16.6
17.1
17.3
17.5
16.2
16.8
17.0
17.3
16.5 ±0.6
17.0 ±0.5
17.2 ±0.5
17.4 ±0.5
16.1 ±0.6
16.7 ±0.5
16.9 ±0.5
17.2 ±0.5
> 15
> 16
> 16
> 15
> 15
> 16
> 16
> 15
70 ±7
67 ±6
61 ±6
59 ±6
70 ±7
67 ±6
62 ±6
58 ±6
7.1 ±0.6
6.4 ±0.5
5.7 ±0.4
5.2 ±0.4
7.1 ±0.6
6.4 ±0.5
5.6 ±0.4
5.2 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 27
≥ 27
Front to back ratio , ±30° (dB)
> 24
> 25
> 25
> 24
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 17
> 17
> 17
> 16
> 17
> 17
> 17
> 16
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
226
Product
List
Product
Category
A104518R1v06
D10X-2x690-960/2x1427-2690/2x1695-2690/2x1427-2690/2x1695-269010x65-16.5i/16.5i/17.5i/17.5i/17.5i/17.5i/17i/17i/17i/17i-10xM-R
EasyRET 2L8H 20-Port Antenna with 10 Integrated RCUs - 2.6m
Mechanical Properties
2769 x 469 x 206
Packing dimensions (H x W x D) (mm)
2980 x 555 x 255
Antenna weight (kg)
51.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
106
(809)
Antenna dimensions (H x W x D) (mm)
69.8 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
1885
2769
Frontal:
860 (at 150 km/h)
Lateral:
535 (at 150 km/h)
Maximum: 1140 (at 150 km/h)
Wind load (N)
200
Survival wind speed (km/h)
250
Connector
20 x 4.3-10 Female
Bottom
75
Connector position
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 8°
3.1 kg
1 (Separate packing)
b
c
d
Integrated RET S/N:
e
a HWxxxx………Lr1
b HWxxxx…….LBy1
c HWxxxx…..CLBy3
j
a
i
h
d HWxxxx…..CRBy5
g
y2
y4
y6
y8
f HWxxxx………Rr2
y1
y3
y5
y7
g HWxxxx…….RTy8
r1
e HWxxxx…….RBy7
f
h HWxxxx…..CRTy6
i HWxxxx…..CLTy4
j HWxxxx…….LTy2
227
r - Red
T- Top array
L - Left array
R - Right array
Product
List
r2
y - Yellow
B - Bottom array
C - Center array
Product
Category
A104518R1v06
D10X-2x690-960/2x1427-2690/2x1695-2690/2x1427-2690/2x1695-269010x65-16.5i/16.5i/17.5i/17.5i/17.5i/17.5i/17i/17i/17i/17i-10xM-R
EasyRET 2L8H 20-Port Antenna with 10 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details
about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety-Equipment installed outdoor),EN 55032(Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489,FCC Part15,ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Pattern sample for reference
1427 - 2690 MHz
(CLBy3/CRBy5)
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(CLTy4/CRTy6)
1695 - 2690 MHz
(LBy1/RBy7)
1695 - 2690 MHz
(LTy2/RTy8)
228
Product
List
Product
Category
B. Passive Antenna
Multi-band
B - 5 3LnH
10 Ports - 3L2H
Frequency
3dB Horizontal Gain
Range (MHz) Beam Width (o) (dBi)
690-862/
880-960/
690-960/
1427-2690/
1695-2690
690-862/
880-960/
690-960/
1427-2690/
1695-2690
Electrical
Tilt Method Connector
Downtilt (o)
Dimension(mm)
Model
Page
5 x 65
15/
15.5/
16/
18/
18
0-10/
0-10/
0-10/
2-12/
2-12
EasyRET2.0
10 x 4.3-10
1999 x 469 x 206
APE4518R34v06
231
5 x 65
16/
16.5/
17/
17.5/
18
2-12/
2-12/
2-12/
2-12/
2-12
EasyRET2.0
10 x 4.3-10
2769 x 469 x 206
APE4518R25v07
234
Electrical
Tilt Method Connector
Downtilt (o)
Dimension(mm)
Model
Page
16 Ports - 3L5H
Frequency
3dB Horizontal Gain
Range (MHz) Beam Width (o) (dBi)
690-862/
880-960/
690-960/
1427-2690/
2x1695-2200/
2x2490-2690
690-862/
880-960/
690-960/
1427-2690/
4x1695-2690
8 x 65
15/
15.5/
16/
17.5/
2x17/
2x17.5
2-12/
2-12/
2-12/
2-12/
2 x 2-12/
2 x 2-12
EasyRET2.0
16 x 4.3-10
1999 x 469 x 206
AOC4518R9v06
237
8 x 65
16/
16.5/
17/
17.5/
4 x 17.5
2-12/
2-12/
2-12/
2-12/
4 x 2-12
EasyRET2.0
16 x 4.3-10
2769 x 469 x 206
AOC4518R0v06
240
Electrical
Tilt Method Connector
Downtilt (o)
Dimension(mm)
Model
Page
18 Ports - 3L6H
Frequency
3dB Horizontal
Range (MHz) Beam Width (o)
Gain
(dBi)
2x690-960/
790-960/
2x1427-2690/
4x1695-2690
9 x 65
2x16/
16/
2x17.5/
4x18
2 x 2-12/
2-12/
2 x 2-12/
4 x 2-12
EasyRET2.0
18 x 4.3-10
2099 x 499
**A094518R09v06
243
2x690-960/
790-960/
2x1427-2690/
4x1695-2690
9 x 65
2x15/
15/
2x16.5/
4x17
2 x 2-12/
2-12/
2 x 2-12/
4 x 2-12
EasyRET2.0
18 x 4.3-10
2695 x 499
**A094518R08v06
244
** Preliminary Issue
229
Product
Category
Multi-band
B - 5 3L12H
30 Ports - 3L12H
Frequency 3dB Horizontal
Range (MHz) Beam Width (o)
690-862
880-960
690-960
2x1695-2690/
2x1695-1880/
2x2300-2690/
2x1427-1880/
2x2300-2690/
2x1695-2690
15 x 65
Gain
(dBi)
15.5/
16/
16.5/
2x17.5/
2x16.5/
2x17.5/
2x16/
2x17/
2x17.5
Electrical
Tilt Method Connector
Downtilt (o)
2-12/
2-12/
2-12/
2 x 2-12/
2 x 2-12/
2 x 2-12/
2 x 2-12/
2 x 2-12/
2 x 2-12
EasyRET2.0
30 x 4.3-10
230
Dimension(mm)
Model
Page
2769 x 469 x 206
A154517R0v06
245
Product
Category
APE4518R34v06
DXXXXX-690-862/880-960/690-960/1427-2690/1695-269065/65/65/65/65-15i/15.5i/16i/18i/18i-M/M/M/M/M-R
EasyRET 3L2H 10-Port Antenna with 5 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 - 960 (Rr3)
Frequency range (MHz)
690 - 803
790 - 862
1695 - 2690 (Ry2)
824 - 894
880 - 960
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
0 - 10 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
1695 - 1990
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12 , continuously adjustable
14.8
15.4
15.6
15.9
17.0
17.5
17.6
18.0
14.7±0.5
15.3±0.5
15.5±0.5
15.7±0.5
16.9±0.6
17.4±0.5
17.5±0.5
17.9±0.5
> 15
> 16
> 16
> 15
> 16
> 16
> 16
> 16
70±5
69±5
68±5
66±5
11.0 ±0.8
9.8 ±0.5
9.5 ±0.5
8.8 ±0.5
62±5
VSWR
6.5 ±0.5
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
60±5
60±5
58±5
5.9 ±0.5
5.2 ±0.5
4.8 ±0.5
Front to back ratio , ±30° (dB)
> 22
> 23
> 24
> 24
> 25
> 26
> 26
> 27
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
> 20
> 20
> 20
> 18
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1427 - 2690 (Ly1)
Frequency range (MHz)
1427 - 1518
Polarization
690 - 803
790 - 862
880 - 960
(Lr2)
+45° , -45°
0 - 10 , continuously adjustable ,
each band separately
2 - 12 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
690 - 862 (Lr1)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.2
17.3
17.4
17.8
18.0
14.5
15.1
15.5
16.1±0.5
17.2±0.5
17.3±0.5
17.7±0.5
17.9±0.5
14.4±0.5
15.0±0.5
15.4±0.5
>15
>16
>16
>15
>15
> 15
> 15
> 16
62±7
61±7
62±6
58±5
58±5
70±5
69±5
66±5
7.9±0.5
6.6±0.5
5.8±0.5
5.2±0.5
4.8±0.5
11.0±0.8
9.8±0.5
8.8±0.5
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 25
Cross polar ratio (dB)
> 15
0°
Max. effective power per port
(W)
≥ 28
> 28
> 16
> 16
> 16
> 28
> 22
> 23
> 24
> 15
> 20
> 20
> 20
250 (at 50℃ ambient temperature)*
400 (at 50℃ ambient
temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -150 (2 x 43 dBm carrier)
Intermodulation IM3 (dBc)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
231
Product
List
Product
Category
APE4518R34v06
DXXXXX-690-862/880-960/690-960/1427-2690/1695-269065/65/65/65/65-15i/15.5i/16i/18i/18i-M/M/M/M/M-R
EasyRET 3L2H 10-Port Antenna with 5 Integrated RCUs - 2.0m
106
Antenna dimensions (H x W x D) (mm)
1999 x 469 x 206
Packing dimensions (H x W x D) (mm)
2255 x 535 x 285
Antenna weight (kg)
40.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(506)
Mechanical Properties
61.6 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1999
Mast diameter supported (mm)
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1420
Frontal:
600 (at 150 km/h)
Lateral:
365 (at 150 km/h)
Maximum: 795 (at 150 km/h)
10 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0 - 12 °
3.1 kg
1 (Separate packing)
73
Accessories
Pattern sample for reference
690 - 862 MHz
(Lr1)
880 - 960 MHz
(Lr2)
1427 - 2690 MHz
(Ly1)
690 - 960 MHz
(Rr3)
1695 - 2690 MHz
(Ry2)
232
Product
List
Product
Category
APE4518R34v06
DXXXXX-690-862/880-960/690-960/1427-2690/1695-269065/65/65/65/65-15i/15.5i/16i/18i/18i-M/M/M/M/M-R
EasyRET 3L2H 10-Port Antenna with 5 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is staring up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ.40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
r2
HWxxxx……Lr2
HWxxxx……Lr1
HWxxxx……Ly1
HWxxxx……Ry2
y1
HWxxxx……Rr3
r - Red
L - Left array
233
y - Yellow
R - Right array
r1
y2
r3
C - Center array
Product
List
Product
Category
APE4518R25v07
DXXXXX-690-862/880-960/690-960/1427-2690/1695-269065/65/65/65/65-16i/16.5i/17i/17.5i/18i-M/M/M/M/M-R
EasyRET 3L2H 10-Port Antenna with 5 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 - 862 (Lr1)
Frequency range (MHz)
690 - 803
Polarization
690 - 803
824 - 894
790 - 862
+45° , -45°
880 - 960
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
690 - 960 (Rr3)
880 - 960
(Lr2)
790 - 862
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.4
16.0
16.5
15.8
16.3
16.6
16.9
15.2 ±0.5
15.9 ±0.5
16.2 ±0.5
15.6 ±0.5
16.2 ±0.5
16.4 ±0.5
16.6 ±0.5
>15
>15
>16
>15
>15
>16
>16
70 ±5
69 ±5
65 ±4
70 ±5
69 ±5
68 ±4
65 ±4
8.3 ±0.5
7.4 ±0.5
6.4 ±0.4
8.7 ±0.7
7.8 ±0.6
7.5 ±0.6
7.2 ±0.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 23
> 25
> 22
> 24
> 24
> 25
Cross polar ratio (dB)
> 19
> 22
> 22
> 19
> 21
> 22
> 22
0°
Max. effective power per port(W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient temperature)*
500 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1427 - 2690 (Ly1)
Frequency range (MHz)
1427 1518
1695 1990
Polarization
2200 2490
1695 - 2690 (Ry2)
2490 2690
1695 1990
+45° , -45°
1920 2200
2200 2490
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
+45° , -45°
16.2
17.3
16.1 ±0.5
> 15
17.4
17.8
18.0
17.1
17.4
17.5
> 16
> 16
> 16
> 15
> 16
> 17
> 16
62 ±7
61 ±7
62 ±6
58 ±6
58 ±5
62 ±6
61 ±5
60 ±5
58 ±5
6.5 ±0.4
5.8 ±0.4
5.2 ±0.4
4.8 ±0.4
6.5 ±0.5
5.7 ±0.5
5.2 ±0.4
4.8 ±0.4
< 1.5
< 1.5
< 1.5
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 25
Cross polar ratio (dB)
> 15
0°
> 16
7.9 ±0.4
Cross polar isolation (dB)
Max. effective power per port(W)
18.0
17.2 ±0.6 17.3 ±0.6 17.7 ±0.5 17.8 ±0.5 17.0 ±0.6 17.3 ±0.6 17.4 ±0.6 17.8 ±0.7
VSWR
Intermodulation IM3 (dBc)
2490 2690
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
1920 2200
≥ 28
≥ 28
> 28
> 28
> 28
> 28
> 16
> 16
> 16
> 15
250 (at 50℃ ambient temperature)*
> 26
> 26
> 27
> 27
> 22
> 20
> 18
> 18
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
234
Product
List
Product
Category
APE4518R25v07
DXXXXX-690-862/880-960/690-960/1427-2690/1695-269065/65/65/65/65-16i/16.5i/17i/17.5i/18i-M/M/M/M/M-R
EasyRET 3L2H 10-Port Antenna with 5 Integrated RCUs - 2.6m
106
Antenna dimensions (H x W x D) (mm)
2769 x 469 x 206
Packing dimensions (H x W x D) (mm)
2960 x 535 x 275
Antenna weight (kg)
(823)
Mechanical Properties
46.5
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
71.8 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1873
2769
Mast diameter supported (mm)
-40 .. +65
Frontal:
860 (at 150 km/h)
Lateral:
535 (at 150 km/h)
Maximum: 1140 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
10 x 4.3-10 Female
Connector position
Bottom
73
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0 - 8°
3.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 862 MHz
(Lr1)
880 - 960 MHz
(Lr2)
1427 - 2690 MHz
(Ly1)
690 - 960 MHz
(Rr3)
1695 - 2690 MHz
(Ry2)
235
Product
List
Product
Category
APE4518R25v07
DXXXXX-690-862/880-960/690-960/1427-2690/1695-269065/65/65/65/65-16i/16.5i/17i/17.5i/18i-M/M/M/M/M-R
EasyRET 3L2H 10-Port Antenna with 5 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is staring up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ.40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
r2
HWxxxx……Lr2
HWxxxx……Lr1
HWxxxx……Ly1
HWxxxx……Ry2
HWxxxx……Rr3
r - Red
L - Left array
236
y1
y - Yellow
R - Right array
Product
List
r1
y2
r3
Product
Category
AOC4518R9v06
D8X-690-862/880-960/690-960/1427-2690/2x(1695-2200)/
2x(2490-2690)-8x65-15i/15.5i/16i/17.5i/17i/17i/17.5i/17.5i-8xM-R
EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
1427 - 2690 (Cy2)
690 - 960 (Rr3)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization
Electrical downtilt (°)
Gain (dBi)
1427 1518
at mid Tilt
over all Tilts
1920 2200
2200 2490
2490 2690
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable
2 - 12 , continuously adjustable
14.8
15.4
15.6
15.9
16.2
17.3
17.4
17.8
18.0
14.7 ±0.5
15.3 ±0.5
15.5 ±0.5
15.7 ±0.5
16.1 ±0.5
17.2 ±0.5
17.3 ±0.5
17.7 ±0.5
17.9 ±0.5
> 15
> 16
> 16
> 15
>15
>16
>16
>16
>15
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
1695 1990
70 ±5
69 ±5
68 ±5
66 ±5
62 ±7
61 ±7
62 ±6
58 ±5
58 ±5
11.0 ±0.8
9.8 ±0.5
9.5 ±0.5
8.8 ±0.5
7.9 ±0.5
6.5 ±0.5
5.8 ±0.5
5.2 ±0.5
4.8 ±0.5
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 23
> 24
> 24
> 25
> 28
> 28
> 28
> 26
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
> 15
> 16
> 16
> 16
> 15
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
500 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
50
50
DC Ground
DC Ground
Electrical Properties
690 - 862 (Lr1)
Frequency range (MHz)
690 - 803
790 - 862
880 - 960 (Lr2)
Polarization
1695 - 1990
1920 - 2200
2 x (2490 2690) (Ly1/Ry3)
+45° , -45°
2 - 12 , continuously adjustable ,
each band separately
Electrical downtilt (°)
Gain (dBi)
2 x (1695 - 2200) (Lb1/Rb2)
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12 , continuously adjustable,
each band separately
14.5
15.1
15.5
16.9
17.3
17.7
14.4 ±0.5
15.0 ±0.5
15.4 ±0.5
16.8 ±0.5
17.2 ±0.5
17.6 ±0.5
> 15
> 15
> 16
> 16
> 17
> 16
70 ±5
69 ±5
66 ±5
63 ±6
61 ±5
58 ±5
8.8 ±0.5
6.5 ±0.5
5.8 ±0.5
4.8 ±0.5
11.0 ±0.8
9.8 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 23
> 24
> 26
> 25
> 26
Cross polar ratio (dB)
> 20
> 20
> 20
> 20
> 20
> 18
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
500 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
237
Product
List
Product
Category
AOC4518R9v06
D8X-690-862/880-960/690-960/1427-2690/2x(1695-2200)/
2x(2490-2690)-8x65-15i/15.5i/16i/17.5i/17i/17i/17.5i/17.5i-8xM-R
EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1999 x 469 x 206
Packing dimensions (H x W x D) (mm)
2255 x 535 x 285
44.0
Clamps weight (kg)
(506)
Antenna weight (kg)
106
6.3 (2 units)
Antenna packing weight (kg)
63.5 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
1420
Operational temperature (℃)
Frontal:
600 (at 150 km/h)
Lateral:
365 (at 150 km/h)
Maximum: 795 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
16 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0 - 12°
3.1 kg
1 (Separate packing)
73
Accessories
Pattern sample for reference
690 - 862 MHz
(Lr1)
880 - 960 MHz
(Lr2)
690 - 960 MHz
(Rr3)
1427 - 2690 MHz
(Cy2)
1695 - 2200 MHz
(Lb1/Rb2)
2490 - 2690 MHz
(Ly1/Ry3)
238
Product
List
Product
Category
1999
Mast diameter supported (mm)
AOC4518R9v06
D8X-690-862/880-960/690-960/1427-2690/2x(1695-2200)/
2x(2490-2690)-8x65-15i/15.5i/16i/17.5i/17i/17i/17.5i/17.5i-8xM-R
EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is staring up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ.40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx………Lr2
HWxxxx………Lr1
r2
HWxxxx……...Lb1
y1
HWxxxx………Cy2
h
g
y3
y2
HWxxxx………Rb2
HWxxxx……...Rr3
b1
r1
g HWxxxx………Ry3
h
HWxxxx………Ly1
r - Red
L - Left array
239
b2
r3
y - Yellow
C - Center array
b- Blue
R - Right array
Product
List
Product
Category
AOC4518R0v06
D8X-690-862/880-960/690-960/1427-2690/4x(1695-2690)-8x6516i/16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R
EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 - 862 (Lr1)
Frequency range (MHz)
690 - 803
Polarization
690 - 960 (Rr3)
690 - 803
824 - 894
790 - 862
+45° , -45°
Electrical downtilt (°)
880 - 960
+45° , -45°
2 - 12 , continuously adjustable , each band separately
at mid Tilt
Gain (dBi)
880 - 960
(Lr2)
790 - 862
over all Tilts
15.4
16.0
16.5
15.8
16.4
16.7
16.9
15.2 ±0.5
15.9 ±0.5
16.2 ±0.5
15.6 ±0.5
16.3 ±0.5
16.5 ±0.5
16.7 ±0.5
> 15
> 15
> 16
> 15
> 15
> 16
> 16
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
70 ±5
69 ±4
64 ±4
70 ±5
69 ±4
68 ±3
64 ±4
8.3 ±0.5
7.4 ±0.4
6.4 ±0.3
9.0 ±0.5
8.0 ±0.4
7.7 ±0.5
7.2 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 24
> 25
> 22
> 24
> 24
> 25
Cross polar ratio (dB)
> 20
> 24
> 24
> 20
> 24
> 24
> 24
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
500 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1427 - 2690 (Cy3)
Frequency range (MHz)
4 x (1695 - 2690) (LBy1/RTy2/RBy4/RTy5)
1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization
+45° , -45°
Electrical downtilt (°)
+45° , -45°
2 - 12 , continuously adjustable , each band separately
at mid Tilt
16.2
17.3
17.4
17.9
18.0
over all Tilts 16.1 ±0.5 17.2 ±0.5 17.3 ±0.5 17.8 ±0.5 17.9 ±0.5
Gain
(dBi)
Bottom
Top
at mid Tilt
16.6
over all Tilts
at mid Tilt
16.7
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam
Bottom
width (°)
Top
17.0
17.2
17.7
16.5 ±0.5 16.9 ±0.5 17.1 ±0.5 17.5 ±0.5
17.1
17.2
17.7
16.6 ±0.5 17.0 ±0.5 17.1 ±0.5 17.5 ±0.5
> 15
> 16
> 16
> 17
> 17
> 16
> 16
> 16
> 16
61 ±5
61 ±5
59 ±4
58 ±4
7.6 ± 0.5
6.7 ± 0.4
6.0 ± 0.3
5.4 ± 0.3
6.5 ± 0.5
5.8 ± 0.4
5.2 ± 0.3
4.8 ± 0.3
62 ±7
61 ±7
62 ±6
58 ±5
58 ±5
7.9 ±0.4
6.6 ±0.4
5.8 ±0.3
5.2 ±0.3
4.8 ±0.2
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 25
> 28
> 28
> 28
> 28
> 25
> 25
> 25
> 26
Cross polar ratio (dB)
> 15
> 18
> 16
> 16
> 15
> 20
> 18
> 17
> 18
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
≥ 28
250 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
240
Product
List
Product
Category
AOC4518R0v06
D8X-690-862/880-960/690-960/1427-2690/4x(1695-2690)-8x6516i/16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R
EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.6m
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
2769 x 469 x 206
Packing dimensions (H x W x D) (mm)
3024 x 535 x 285
52.8
Clamps weight (kg)
(823)
Antenna weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
78.3 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1873
2769
Mast diameter supported (mm)
-40 .. +65
Frontal:
860 (at 150 km/h)
Lateral:
535 (at 150 km/h)
Maximum: 1140 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
16 x 4.3-10 Female
Connector position
Bottom
73
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0 - 8°
3.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 862 MHz
(Lr1)
880 - 960 MHz
(Lr2)
690 - 960 MHz
(Rr3)
1427 - 2690MHz
(Cy3)
1695 - 2690 MHz
(LBy1/RBy4)
1695 - 2690 MHz
(RTy2/RTy5)
241
Product
List
Product
Category
AOC4518R0v06
D8X-690-862/880-960/690-960/1427-2690/4x(1695-2690)-8x6516i/16.5i/17i/17.5i/17.5i/17.5i/17.5i/17.5i-8xM-R
EasyRET 3L5H 16-Port Antenna with 8 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is staring up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ.40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx………Lr2
r2
HWxxxx………Lr1
HWxxxx……LBy1
h
g
y5
y2
HWxxxx……..Cy3
HWxxxx……RBy4
y1
HWxxxx……...Rr3
g HWxxxx……RTy5
h
y4
r3
HWxxxx……LTy2
r - Red
L - Left array
T - Top array
242
y3
r1
y - Yellow
C - Center array
B - Bottom array
R - Right array
Product
List
Product
Category
A094518R09v06
D09X-2x690-960/790-960/2x1427-2690/4x1695-2690-9x652x15i/15i/2x16.5i/4x17i-9xM-R
EasyRET 3L6H 18-Port Antenna with Integrated RCUs - 2.0m
Preliminary Issue
Electrical Properties
Frequency range (MHz)
2 x (1427 - 2690)
2 x (690 - 960)
790 - 960
2 - 12
2 - 12
14.9
14.5
14.1
16.2
16.5
Side lobe suppression for first
side lobe above main beam
(Typ.) (dB)
15
15
15
16
16
Horizontal 3dB beam width (°)
69
68
72
65
65
Vertical 3dB beam width (°)
9.0
9.0
11.5
9.0
9.0
Electrical downtilt (°)
Gain (dBi)
1427 - 1518
2 - 12
VSWR
4 x (1695 - 2690)
2 - 12
< 1.5
Front to back ratio, copolar
(dB)
Cross polar ratio (dB)
1695 - 2690
0°
Typ. 23
Typ. 23
Typ. 23
Typ. 25
Typ. 25
Typ. 17
Typ. 17
Typ. 17
Typ. 17
Typ. 17
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2099 x 499
Antenna net weight (kg)
51
Mechanical downtilt (°)
0 - 12
Connector
18 x 4.3-10 Female
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
243
Product
List
Product
Category
A094518R08v06
D09X-2x690-960/790-960/2x1427-2690/4x1695-2690-9x652x16i/16i/2x17.5i/4x18i-9xM-R
EasyRET 3L6H 18-Port Antenna with Integrated RCUs - 2.6m
Preliminary Issue
Electrical Properties
Frequency range (MHz)
2 x (1427 - 2690)
2 x (690 - 960)
790 - 960
2 - 12
2 - 12
15.9
15.5
15.1
17.2
17.5
Side lobe suppression for first
side lobe above main beam
(Typ.) (dB)
15
15
15
16
16
Horizontal 3dB beam width (°)
69
68
72
65
65
Vertical 3dB beam width (°)
8.0
8.0
8.7
6.0
6.0
Electrical downtilt (°)
Gain (dBi)
1427 - 1518
2 - 12
VSWR
4 x (1695 - 2690)
2 - 12
< 1.5
Front to back ratio, copolar
(dB)
Cross polar ratio (dB)
1695 - 2690
0°
Typ. 23
Typ. 23
Typ. 23
Typ. 25
Typ. 25
Typ. 17
Typ. 17
Typ. 17
Typ. 17
Typ. 17
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2695 x 499
Antenna net weight (kg)
55
Mechanical downtilt (°)
0-8
Connector
18 x 4.3-10 Female
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
244
Product
List
Product
Category
A154517R0v06
D15X-690-862/880-960/690-960/2x(1695-2690/1695-1880/2300-2690/14271880/2300-2690/1695-2690)-15x65-15.5i/16i/16.5i/2x(17.5i/16.5i/17.5i/16i/17i/
17.5i)-15xM-R
EasyRET 3L12H 30-Port Antenna with 10 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 - 862 (Lr1)
Frequency range (MHz)
690 - 803
690 - 960 (Rr3)
880 - 960
(Lr2)
790 - 862
690 - 803
Polarization
824 - 894
880 - 960
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
790 - 862
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.6
15.8
16.2
15.7
16.0
16.2
16.4
15.5 ±0.5
15.7 ±0.5
16.0 ±0.5
15.6 ±0.5
15.9 ±0.5
16.0 ±0.5
16.2 ±0.5
> 15
> 15
> 16
> 15
> 16
> 16
> 16
70 ±6
68 ±6
67 ±6
70 ±6
69 ±6
68 ±6
66 ±6
7.4 ±0.5
6.4 ±0.5
8.8 ±0.7
7.9 ±0.5
7.6 ±0.5
7.2 ±0.4
> 22
> 22
> 22
> 18
> 18
> 18
8.2 ±0.6
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 27
≥ 27
Front to back ratio , ±30° (dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
> 21
> 22
> 22
> 21
> 18
> 18
> 18
> 18
350 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
400 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690) (LBy1/RBy4)
Frequency range (MHz)
1695 - 1990
1920 - 2200
2200 - 2490
Polarization
1695 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band
separately
Electrical downtilt (°)
Gain (dBi)
2 x (1695 - 2690) (RTy5)
2490 - 2690
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.9
17.2
17.3
2 - 12 , continuously adjustable
17.7
16.1
16.9
17.1
17.4
16.8 ±0.5 17.1 ±0.5 17.2 ±0.5 17.6 ±0.5 16.0 ±0.6 16.8 ±0.5 17.0 ±0.5 17.3 ±0.5
> 15
> 16
> 16
> 16
> 15
> 15
> 16
> 16
70 ±6
69 ±6
66 ±6
58 ±6
69 ±7
67 ±6
62 ±6
60 ±6
7.1 ±0.6
6.3 ±0.6
5.6 ±0.3
5.1 ±0.3
7.0 ±0.6
6.2 ±0.5
5.5 ±0.3
5.1 ±0.3
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 27
≥ 27
Front to back ratio , ±30° (dB)
> 25
> 25
> 25
> 24
> 24
> 25
> 25
> 24
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 17
> 17
> 17
> 18
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
245
Product
List
Product
Category
A154517R0v06
D15X-690-862/880-960/690-960/2x(1695-2690/1695-1880/2300-2690/14271880/2300-2690/1695-2690)-15x65-15.5i/16i/16.5i/2x(17.5i/16.5i/17.5i/16i/17i/
17.5i)-15xM-R
EasyRET 3L12H 30-Port Antenna with 10 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (1695 - 1880)
(Bb1)
Frequency range (MHz)
2 x (2300 - 2690)
(CBy3)
2 x (2300 - 2690)
(LTy2)
2300 - 2490 2490 - 2690 1427 - 1518 1695 - 1880 2300 - 2490 2490 - 2690
Polarization
+45° , -45°
2 - 12 ,
continuously
adjustable
Electrical downtilt (°)
Gain (dBi)
2 x (1427 - 1880) (Tb2)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 - 12 , continuously
adjustable
2 - 12 , continuously
adjustable
2 - 12 , continuously
adjustable
16.1
17.0
17.4
15.5
16.2
16.5
17.2
16.0 ±0.6
16.9 ±0.5
17.3 ±0.5
15.4 ±0.6
16.1 ±0.5
16.4 ±0.5
17.0 ±0.5
> 15
> 16
> 16
> 15
> 16
> 16
> 16
69 ±7
61 ±6
60 ±6
70 ±7
69 ±6
65 ±6
58 ±6
5.7 ±0.3
5.2 ±0.3
5.9 ±0.3
9.3 ±0.5
7.8 ±0.5
VSWR
7.6 ±0.7
< 1.5
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 27
5.3 ±0.3
≥ 27
≥ 27
Front to back ratio , ±30° (dB)
> 23
> 25
> 24
> 23
> 25
> 24
> 24
Cross polar ratio (dB)
> 16
> 16
> 17
> 18
> 18
> 18
> 17
0°
Max. effective power per port (W)
≥ 27
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 1600 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
106
2769 x 469 x 206
Packing dimensions (H x W x D) (mm)
2980 x 555 x 255
Antenna weight (kg)
62.5
Clamps weight (kg)
6.3 (2 units)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
Survival wind speed (km/h)
Connector
Connector position
2769
81.3 (Included clamps)
Mast diameter supported (mm)
Frontal:
860(at 150 km/h)
Lateral:
535(at 150 km/h)
Maximum: 1140(at 150 km/h)
1885
Antenna packing weight (kg)
(809)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
200
250
10 x 4.3-10 Female +5 x MQ4 Male
Bottom
75
*GFRPP: Glass Fiber Reinforced Polypropylene
246
Product
List
Product
Category
A154517R0v06
D15X-690-862/880-960/690-960/2x(1695-2690/1695-1880/2300-2690/14271880/2300-2690/1695-2690)-15x65-15.5i/16i/16.5i/2x(17.5i/16.5i/17.5i/16i/17i/
17.5i)-15xM-R
EasyRET 3L12H 30-Port Antenna with 10 Integrated RCUs - 2.6m
Accessories
Item
Model
Description
Weigh
t
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0-8°
3.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 862 MHz
(Lr1)
880 - 960 MHz
(Lr2)
690 - 960 MHz
(Rr3)
1695 - 2690 MHz
(LBy1/RBy4)
1695 - 1880 MHz
(Bb1)
2300 - 2690 MHz
(CBy3)
1695 - 2690 MHz
(RTy5)
1427 - 1880 MHz
(Tb2)
2300 - 2690 MHz
(LTy2)
247
Product
List
Product
Category
A154517R0v06
D15X-690-862/880-960/690-960/2x(1695-2690/1695-1880/2300-2690/14271880/2300-2690/1695-2690)-15x65-15.5i/16i/16.5i/2x(17.5i/16.5i/17.5i/16i/17i/
17.5i)-15xM-R
EasyRET 3L12H 30-Port Antenna with 10 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is staring up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ.40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx…….LTy2
HWxxxx…….LBy1
r2
HWxxxx……....Lr1
y2
y5
HWxxxx….......Lr2
j
i
HWxxxx……RBy4
g HWxxxx……RTy5
y1
h
HWxxxx……...Tb2
r1
i
HWxxxx……CBy3
j
HWxxxx……..Bb1
r - Red
T- Top array
L - Left array
248
y5
b2
HWxxxx……...Rr3
h
y2
y - Yellow
B - Bottom array
C - Center array
b2
y3
y3
b1
b1
y4
r3
b- Blue
R - Right array
Product
List
Product
Category
B. Passive Antenna
Multi-beam
1. Dual-beam Antenna
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
690-960/
690-960
33(-30)/
33(+30)
18.5/18.5
0-10/0-10
EasyRET2.0
4 x 4.3-10
2090 x 590 x 169
AMB4519R0v06
252
1695-2690/
1695-2690
33(-30)/
33(+30)
20/20
2-12/2-12
EasyRET2.0
4 x 4.3-10
1499 x 399 x 196
AMB4520R8v06
254
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
2. Hybrid Multi-beam Antenna
690-960/
1710-2200/
1710-2200
65/
33(-30)/
33(+30)
16/
19.5/
19.5
0-10/2-12/
2-12
EasyRET2.0
6 x 4.3-10
2022 x 359 x 178
AMB4520R2v06
256
690-960/
1695-2690/
1695-2690/
1695-2200/
1695-2200
65/65/65/
33(-30)/
33(+30)
17/
17.5/
17.5/
18.5/
18.5
0-10/2-12/
2-12/0-10/
0-10
EasyRET2.0
10 x 4.3-10
2685 x 359 x 178
AMB4519R2v06
259
690-960/
1695-2200/
1695-2200/
2490-2690/
2490-2690/
1695-2200/
1695-2200
65/65/65/
65/65/
33(-30)/
33(+30)
17/
17.5/
17.5/
18/
18/
18.5/
18.5
0-10/
2-12/2-12/
2-12/2-12/
0-10/0-10
EasyRET2.0
14 x 4.3-10
2685 x 359 x 178
AMB4519R4v06
262
1710-2690/
1710-2690/
1710-2200/
1710-2200
65/65/
33(-30)/
33(+30)
18/
18/
19.5/
19.5
0-12/0-12/
2-12/2-12
EasyRET2.0
8 x 4.3-10
2688 x 349 x 166
AMB4520R4v06
266
249
Product
Category
Multi-beam
3. Dual-band Dual-beam Antenna
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
EasyRET2.0
8 x 4.3-10
2090 x 590 x 169
AMB4519R3v06
269
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
790-960/
790-960/
1710-2200/
1710-2200
33(-30)/
33(+30)/
33(-30)/
33(+30)
16/
16/
18.5/
18.5
2-12/2-12/
2-12/2-12
4. 4T4R Dual-beam Antenna
1695-2690/
1695-2690/
1695-2690/
1695-2690
33(-30)/
33(+30)/
33(-30)/
33(+30)
19/
19/
19/
19
2-12/2-12/
2-12/2-12
EasyRET2.0
8 x 4.3-10
2099 x 399 x 196
AMB4519R6v06
272
1695-2690/
1695-2690/
1695-2690/
1695-2690
33(-30)/
33(+30)/
33(-30)/
33(+30)
19.5/
19.5/
19.5/
19.5
2-12/2-12/
2-12/2-12
EasyRET2.0
8 x 4.3-10
2550 x 399 x 196
AMB4520R9v06
275
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
6 x 4.3-10
1499 x 449 x 115
AMB4521R0v06
278
5. Triple-beam Antenna
1710-2200/
1710-2200/
1710-2200
22(-30)/
22(0)/
22(+30)
21/
21/
21
2-12/2-12/
2-12
EasyRET2.0
250
Product
Category
Multi-beam
6. Hybrid 4T4R Dual-beam Antenna
Frequency 3dB Horizontal
Electrical
Gain (dBi)
Tilt Method
Range (MHz) Beam Width (o)
Downtilt (o)
Connector
Dimension(mm)
Model
Page
690-960/
1695-2200/
1695-2200/
1695-2200/
1695-2200
65/
33(-30)/
33(+30)/
33(-30)/
33(+30)/
17/
19/
19/
19/
19
0-10/2-12/
2-12/2-12/
2-12
EasyRET2.0
10 x 4.3-10
2685 x 359 x 178
AMB4519R5v06
280
1427-2690/
1695-2690/
1695-2690/
1695-2690/
1695-2690
65/
33(-30)/
33(+30)/
33(-30)/
33(+30)/
17.5/
18.5/
18.5/
18.5/
18.5
2-12/2-12/
2-12/2-12/
2-12
EasyRET2.0
10 x 4.3-10
2009 x 499 x 206
AMB4519R23v06
283
690-960/
690-960/
1695-2690/
1695-2690/
1695-2690/
1695-2690
65/65/
33(-30)/
33(+30)/
33(-30)/
33(+30)/
15.5/
15.5/
18.5/
18.5/
18.5/
18.5
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
12 x 4.3-10
2009 x 499 x 206
AMB4519R13v06
286
690-960/
690-960/
1695-2690/
1695-2690/
1695-2690/
1695-2690
65/65/
33(-30)/
33(+30)/
33(-30)/
33(+30)/
16.5/
16.5/
19/
19/
19/
19
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
12 x 4.3-10
2769 x 499 x 206
AMB4519R9v06
289
690-960/
1427-2690/
1427-2690/
1695-2690/
1695-2690/
1695-2690/
1695-2690
65/65/65/
33(-30)/
33(+30)/
33(-30)/
33(+30)/
15.5/
17.5/
17.5/
18.5/
18.5/
18.5/
18.5
2-12/
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
14 x 4.3-10
2009 x 499 x 206
AMB4519R24v06
292
690-960/
690-960/
1427-2690/
1427-2690/
1695-2690/
1695-2690/
1695-2690/
1695-2690
65/65/65/65/
33(-30)/
33(+30)/
33(-30)/
33(+30)/
15.5/
15.5/
17.5/
17.5/
18.5/
18.5/
18.5/
18.5
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
16 x 4.3-10
2009 x 499 x 206
AMB4519R18v06
295
690-960/
690-960/
1695-2690/
1695-2690/
1695-2690/
1695-2690/
1695-2690/
1695-2690
65/65/65/65/
33(-30)/
33(+30)/
33(-30)/
33(+30)/
16.5/
16.5/
17.5/
17.5/
18.5/
18.5/
18.5/
18.5
2-12/2-12/
2-12/2-12/
2-12/2-12/
2-12/2-12
EasyRET2.0
16 x 4.3-10
**AMB4519R29v06
298
** Preliminary Issue
251
Product
Category
AMB4519R0v06
2MX-690-960-33-18.5i-M-R
EasyRET Dual-beam Antenna with 2 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 – 960 (r/rr)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
0 - 10 , continuously adjustable,
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
16.6
18.0
18.2
18.3
over all Tilts
16.5 ±0.5
17.8 ±0.4
18.0 ±0.3
18.2 ±0.3
> 16
> 17
> 18
> 18
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
39 ±3
37 ±3
36 ±2
34 ±2
10.0 ±0.5
9.2 ±0.3
8.9 ±0.3
8.3 ±0.3
± 30
± 28
± 27
± 25
VSWR
< 1.5
Horizontal beam centers (°)
Cross polar isolation (dB)
Same beam: ≥ 22
Same beam: ≥ 26
≥18 (758 - 788MHz & 791-821MHz & 869-894MHz ≥ 25; 925 - 960MHz ≥ 21）
Beam to beam isolation (dB)
Front to back ratio, ±30° (dB)
> 25
> 26
> 26
> 26
Cross polar ratio at boresight (dB)
> 17
> 22
> 23
> 23
Max. effective power per port (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
2090 x 590 x 169
2350 x 705 x 275
Antenna weight (kg)
36.1
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
106
(726)
Antenna dimensions (H x W x D) (mm)
Packing dimensions (H x W x D) (mm)
49.6 (Included clamps)
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
1330 (at 150 km/h)
Lateral:
190 (at 150 km/h)
Maximum: 1330 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
2090
50 - 115
Radome material
1267
Mast diameter supported (mm)
200
Survival wind speed (km/h)
250
Connector
4 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0 - 12 °
3.1 kg
1 (Separate packing)
252
97
Accessories
Unit: mm
Product
List
Product
Category
AMB4519R0v06
2MX-690-960-33-18.5i-M-R
EasyRET Dual-beam Antenna with 2 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is staring up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ.30 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx…….r
r
rr
HWxxxx……rr
r - Red
Pattern sample for reference
690 - 960 MHz
(r+30)
690 - 960 MHz
(rr-30)
253
Product
List
Product
Category
AMB4520R8v06
2MX-1695-2690-33-20i-M-R
EasyRET Dual-Beam Antenna with 2 Integrated RCUs - 1.5m
Antenna Specifications
Electrical Properties
1695 – 2690 (y1/y2)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe
above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
19.1
19.6
20.0
20.3
18.9 ±0.6
19.4 ±0.4
19.8 ±0.5
20.1 ±0.6
> 16
> 16
> 16
> 16
37 ±4
36 ±3
34 ±3
32 ±3
7.1 ±0.5
6.3 ±0.6
5.6 ±0.4
5.1 ±0.3
±31
±31
±31
±32
VSWR
< 1.5
Horizontal beam centers (°)
Cross polar isolation (dB)
≥ 28
Port to port isolation(dB)
≥ 25
Front to back ratio, ±30° (dB)
> 28
> 28
> 28
> 29
Cross polar ratio at boresight (dB)
> 15
> 16
> 15
> 16
Max. effective power per port (W)
250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W)
700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
1509 x 399 x 196
Packing dimensions (H x W x D) (mm)
1785 x 480 x 250
Antenna weight (kg)
20
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(135)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
31 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1310
1509
Mast diameter supported (mm)
-40 .. +65
Frontal:
Lateral:
Maximum:
Wind load (N)
400 (at 150 km/h)
235 (at 150 km/h)
510 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
4 x 4.3-10 Female
Connector position
64
Connector
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0 - 16 °
2.1 kg
1 (Separate packing)
254
Product
List
Product
Category
AMB4520R8v06
2MX-1695-2690-33-20i-M-R
EasyRET Dual-Beam Antenna with 2 Integrated RCUs - 1.5m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is staring up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ.40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……y1
y1
HWxxxx……y2
y2
y - Yellow
Pattern sample for reference
1695 - 2690 MHz
(y1)
1695 - 2690 MHz
(y2)
255
Product
List
Product
Category
AMB4520R2v06
2MXX-690-960/1710-2200-65/33-16i/19.5i-M/M-R
EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
690 – 960 (r1)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
880 - 960
0 - 10 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
824 - 894
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.4
15.7
15.8
16.0
15.3 ±0.5
15.6 ±0.5
15.7 ±0.5
15.8 ±0.5
> 16
> 18
> 17
> 17
63 ±2.5
60 ±2.5
60 ±2.5
59 ±3
10.6 ±0.7
9.5 ±0.5
9.2 ±0.4
8.7 ±0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 21
> 24
> 24
> 24
Cross polar ratio (dB)
> 17
> 18
> 17
> 17
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
Frequency range (MHz)
1710 – 2200 (b1/b2)
1710 - 1990
1920 - 2200
Polarization
+45° , -45°
2 - 12 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
18.7
19.4
18.5 ±0.8
19.2 ±0.5
> 17
> 17
32 ±1
30 ±1
6.2 ±0.5
5.6 ±0.4
VSWR
Horizontal beam centers (°)
< 1.5
± 30
± 26
Cross polar isolation (dB)
Same beam: ≥ 25
Beam to beam isolation(dB)
≥ 18
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 28
Cross polar ratio at boresight (dB)
> 17
Max. effective power per port (W)
> 28
> 15
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
256
Product
List
Product
Category
AMB4520R2v06
2MXX-690-960/1710-2200-65/33-16i/19.5i-M/M-R
EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m
Mechanical Properties
2022 x 359 x 178
Packing dimensions (H x W x D) (mm)
2400 x 430 x 255
Antenna weight (kg)
25.0
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(615)
Antenna dimensions (H x W x D) (mm)
40.3 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Frontal:
655 (at 150 km/h)
Lateral:
200 (at 150 km/h)
Maximum: 690 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2022
-40 to +65
1355
Operational temperature (℃)
6 x 4.3-10 Female
Connector position
Bottom
52
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0 - 12 °
2.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 960 MHz
(r1)
1710 - 2200 MHz
(b2-30)
257
1710 - 2200 MHz
(b1+30)
Product
List
Product
Category
AMB4520R2v06
2MXX-690-960/1710-2200-65/33-16i/19.5i-M/M-R
EasyRET Hybrid Triple-beam Antenna with 3 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……r1
HWxxxx……b1
HWxxxx……b2
r - Red
258
b - Blue
Product
List
b1
b2
r1
Product
Category
AMB4519R2v06
2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/3317i/17.5i/17.5i/18.5i-M/M/M/M-R
EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 – 960 (r1)
Frequency range (MHz)
690 - 803
790 - 862
2 x (1695 - 2690) (Ly1/Ry2)
824 - 894
880 - 960
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band
separately
0 - 10 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
1695 - 1990
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.9
16.0
16.1
16.4
16.9
17.1
17.2
17.3
15.7 ±0.4
15.8 ±0.5
15.9 ±0.4
16.2 ±0.5
16.8 ±0.6
17.0 ±0.5
17.0 ±0.5
17.2 ±0.5
> 18
> 19
> 18
> 18
> 17
> 17
> 17
> 17
68 ±4
67 ±4
67 ±3
66 ±4
60 ±5
61 ±5
63 ±5
58 ±5
9.5 ±0.6
8.8 ±0.6
8.4 ±0.6
7.8 ±0.4
6.5 ±0.6
5.8 ±0.4
5.0 ±0.5
4.8 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio, ±30° (dB)
> 25
> 26
> 26
> 26
> 26
> 27
> 27
> 28
Cross polar ratio (dB)
> 15
> 17
> 17
> 17
> 17
> 20
> 20
> 20
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
Frequency range (MHz)
1695 – 2200 (b1/b2)
1695 - 1990
Polarization
0 - 10 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
17.3
18.1
17.1 ±0.6
17.9 ±0.6
> 17
> 17
33 ±3
30 ±3
7.2 ±0.5
6.5 ±0.5
VSWR
Horizontal beam centers (°)
< 1.5
± 29
± 27
Cross polar isolation (dB)
Same beam: ≥ 25
Beam to beam isolation (dB)
≥ 18
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 27
Cross polar ratio at boresight (dB)
> 15
Max. effective power per port (W)
> 29
> 17
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
259
Product
List
Product
Category
AMB4519R2v06
2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/3317i/17.5i/17.5i/18.5i-M/M/M/M-R
EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m
68
Antenna dimensions (H x W x D) (mm)
2685 x 359 x 178
Packing dimensions (H x W x D) (mm)
2945 x 445 x 225
Antenna weight (kg)
34.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(796)
Mechanical Properties
49 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1837
Frontal : 910 (at 150 km/h)
Lateral:
275 (at 150 km/h)
Maximum: 960 (at 150 km/h)
2685
Operational temperature (℃)
10 x 4.3-10 Female
Connector position
Bottom
Accessories
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0-8°
3.1 kg
1 (Separate packing)
52
Item
Pattern sample for reference
690 - 960 MHz
(r1)
1695 - 2690 MHz
(Ly1/Ry2)
1695 - 2200 MHz
(b2)
1695 - 2200 MHz
(b1)
260
Product
List
Product
Category
AMB4519R2v06
2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/3317i/17.5i/17.5i/18.5i-M/M/M/M-R
EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx…..…b1
HWxxxx……..y1
b1
b2
HWxxxx…..…r1
HWxxxx……..y2
y1
HWxxxx…..…b2
r1
y2
r - Red
y - Yellow
b - Blue
L - Left array
R - Right array
261
Product
List
Product
Category
AMB4519R4v06
2MXXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-2690/16952200-65/65/65/65/65/33-17i/17.5i/17.5i/18i/18i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Hepta-beam Antenna with 7 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 – 960 (r1)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
880 - 960
0 - 10 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
824 - 894
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.9
16.1
16.3
16.5
15.7 ±0.4
15.9 ±0.5
16.1 ±0.4
16.3 ±0.5
> 18
> 19
> 18
> 18
68 ±4
67 ±4
67 ±3
66 ±4
9.5 ±0.6
8.8 ±0.6
8.4 ±0.6
7.8 ±0.4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 25
> 26
> 26
> 26
Cross polar ratio (dB)
> 15
> 17
> 17
> 17
0°
Max. effective power per port
(W)
500 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2200) (LTb3/RTb4)
Frequency range (MHz)
1695 - 1990
Polarization
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
2 x (2490 - 2690) (Ly1/Ry2)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
17.1
17.6
18.0
17.0 ±0.4
17.4 ±0.4
17.8 ±0.5
> 17
> 17
> 17
60 ±5
61 ±5
58 ±5
6.4 ±0.6
5.8 ±0.4
4.8 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 26
> 27
> 28
Cross polar ratio (dB)
> 18
> 18
> 18
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
262
Product
List
Product
Category
AMB4519R4v06
2MXXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-2690/16952200-65/65/65/65/65/33-17i/17.5i/17.5i/18i/18i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Hepta-beam Antenna with 7 Integrated RCUs - 2.6m
Electrical Properties
1695 – 2200 (Bb1/Bb2)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
+45° , -45°
0 - 10 , continuously adjustable
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
17.3
18.1
17.1 ±0.6
17.9 ±0.6
> 17
> 17
33 ±3
30 ±3
7.2 ±0.5
6.5 ±0.5
VSWR
< 1.5
Horizontal beam centers (°)
± 29
± 27
Cross polar isolation (dB)
Same beam: ≥ 25
Beam to beam isolation (dB)
≥ 18
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 27
> 29
Cross polar ratio at boresight (dB)
> 15
> 17
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
68
Antenna dimensions (H x W x D) (mm)
2685 x 359 x 178
Packing dimensions (H x W x D) (mm)
2985 x 425 x 255
39.5
Clamps weight (kg)
(796)
Antenna weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
58.3 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
1837
Frontal : 910 (at 150 km/h)
Lateral:
275 (at 150 km/h)
Maximum: 960 (at 150 km/h)
200
Survival wind speed (km/h)
2685
Operational temperature (℃)
250
Connector
14 x 4.3-10 Female
Connector position
Bottom
Accessories
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0-8°
3.1 kg
1 (Separate packing)
52
Item
263
Product
List
Product
Category
AMB4519R4v06
2MXXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-2690/16952200-65/65/65/65/65/33-17i/17.5i/17.5i/18i/18i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Hepta-beam Antenna with 7 Integrated RCUs - 2.6m
Pattern sample for reference
690 - 960 MHz
(r1)
1695 - 2200 MHz
(LTb3/RTb4)
1695 - 2200 MHz
(Bb2)
2490 - 2690 MHz
(Ly1/Ry2)
1695 - 2200 MHz
(Bb1)
264
Product
List
Product
Category
AMB4519R4v06
2MXXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-2690/16952200-65/65/65/65/65/33-17i/17.5i/17.5i/18i/18i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Hepta-beam Antenna with 7 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……...Ly1
HWxxxx……LTb3
HWxxxx………..r1
g
y1
y2
r1
b3
b4
HWxxxx……RTb4
HWxxxx……..Ry2
b1
b2
HWxxxx……..Bb2
g
HWxxxx……..Bb1
r - Red
y - Yellow
b - Blue
L - Left array
R - Right array
T - Top array
B - Bottom array
265
Product
List
Product
Category
AMB4520R4v06
2MXXX-1710-2690/1710-2690/1710-2200-65/65/33-18i/18i/19.5iM/M/M-R
EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (1710 - 2690) (Ly1/Ry2)
Frequency range (MHz)
1710 - 1990
1920 - 2200
2200 - 2490
Polarization
0 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
2490 - 2690
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
17.0
17.3
17.6
17.7
16.9 ±0.5
17.2 ±0.4
17.4 ±0.5
17.5 ±0.4
> 18
> 20
> 19
> 19
67 ±3
64 ±2.5
62 ±2.5
61 ±2.5
6.9 ±0.5
6.3 ±0.3
5.5 ±0.5
5.0 ±0.3
> 27
> 27
> 27
> 19
> 22
> 22
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 27
Cross polar ratio (dB)
> 19
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
Frequency range (MHz)
1710 – 2200 (b1+30/b2-30)
1710 - 1880
1850 - 1990
Polarization
2 - 12 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
+45° , -45°
at mid Tilt
over all Tilts
18.6
19.2
19.5
18.4 ±0.6
19.0 ±0.6
19.3 ±0.4
> 18
> 18
> 18
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
36 ±2
33 ±2
31 ±2
7.2 ±0.4
6.9 ±0.4
6.6 ±0.4
VSWR
Horizontal beam centers (°)
< 1.5
± 31
± 30
Cross polar isolation (dB)
Beam to beam isolation (dB)
≥ 18
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 32
Cross polar ratio at boresight (dB)
> 20
Max. effective power per port (W)
± 28
Same beam: ≥ 28
> 32
> 34
> 20
> 20
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
266
Product
List
Product
Category
AMB4520R4v06
2MXXX-1710-2690/1710-2690/1710-2200-65/65/33-18i/18i/19.5iM/M/M-R
EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.6m
2688 x 349 x 166
Packing dimensions (H x W x D) (mm)
2985 x 425 x 255
Antenna weight (kg)
32.5
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(746)
Antenna dimensions (H x W x D) (mm)
49.1 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
1834
Frontal:
885 (at 150 km/h)
Lateral:
255 (at 150 km/h)
Maximum: 935 (at 150 km/h)
Wind load (N)
2688
50 - 115
2580
Mast diameter supported (mm)
(56)
Mechanical Properties
8 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0-8°
2.1 kg
1 (Separate packing)
52
Accessories
Pattern sample for reference
1710 - 2200 MHz
(b2-30)
1710 - 2690 MHz
(Ly1/Ry2)
267
1710 - 2200 MHz
(b1+30)
Product
List
Product
Category
AMB4520R4v06
2MXXX-1710-2690/1710-2690/1710-2200-65/65/33-18i/18i/19.5iM/M/M-R
EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx….....b1
b1
HWxxxx……Ly1
b2
HWxxxx……Ry2
HWxxxx……..b2
r - Red
L - Left array
268
y1
y2
y - Yellow
R - Right array
Product
List
Product
Category
AMB4519R3v06
2MXX-790-960/1710-2200-33/33-16i/18.5i-M/M-R
EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
790 – 960 (r1/r2)
Frequency range (MHz)
790 - 862
824 - 894
1710 – 2200 (b1/b2)
880 - 960
Polarization
1710 - 1990
1920 - 2200
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe
above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
14.8
15.2
15.7
18.2
19.2
14.7 ±0.8
15.1 ±0.8
15.5 ±0.8
18.0 ±0.8
19.0 ±0.6
> 16
> 17
> 17
> 17
> 18
38 ±3
37 ±3
35 ±3
30 ±3
29 ±1.5
16.0 ±2.4
15.5 ±2.6
14.2 ±2.5
7.2 ±0.5
6.5 ±0.5
± 27
± 26
± 24
± 30
± 29
VSWR
< 1.5
Horizontal beam centers (°)
Cross polar isolation (dB)
Same beam: ≥ 25
Beam to beam isolation(dB)
Same beam: ≥ 25
≥ 18
≥ 18
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 25
Cross polar ratio at boresight (dB)
> 18
Max. effective power per port (W)
500 (at 50℃ ambient temperature)
Max. effective power whole antenna (W)
> 30
> 17
> 18
250 (at 50℃ ambient temperature)
960 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
2090 x 590 x 169
Packing dimensions (H x W x D) (mm)
2350 x 705 x 275
Antenna weight (kg)
38.5
Clamps weight (kg)
6.2 (2 units)
55.5 (Included clamps)
Mast diameter supported (mm)
(725)
Antenna packing weight (kg)
106
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
1267
Frontal:
1330 (at 150 km/h)
Lateral:
190 (at 150 km/h)
Maximum: 1330 (at 150 km/h)
Wind load (N)
200
Survival wind speed (km/h)
2090
Antenna dimensions (H x W x D) (mm)
250
Connector
8 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0 - 12 °
3.1 kg
1 (Separate packing)
269
98
Accessories
Product
List
Product
Category
AMB4519R3v06
2MXX-790-960/1710-2200-33/33-16i/18.5i-M/M-R
EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
r1
HWxxxx……r1
r2
HWxxxx……b1
HWxxxx……b2
b1
b2
HWxxxx……r2
r - Red
270
b - Blue
Product
List
Product
Category
AMB4519R3v06
2MXX-790-960/1710-2200-33/33-16i/18.5i-M/M-R
EasyRET Hybrid Quad-beam Antenna with 4 Integrated RCUs - 2.0m
Pattern sample for reference
790 - 960 MHz
(r2-30)
790 - 960 MHz
(r1+30)
1710 - 2200 MHz
(b2-30)
1710 - 2200 MHz
(b1+30)
271
Product
List
Product
Category
AMB4519R6v06
2MXX-1695-2690/1695-2690-33/33-19i/19i-M/M-R
EasyRET Dual-band Dual-Beam Antenna with 4 Integrated RCUs 2.0m
Antenna Specifications
Electrical Properties
2 x (1695 - 2690) (By1/Ty2/By3/Ty4)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
at mid Tilt
Top
over all Tilts
Gain (dBi)
Bottom
18.0
18.4
18.9
19.4
17.8 ±0.6
18.2 ±0.4
18.7 ±0.7
19.2 ±0.6
18.0
18.6
19.2
19.7
17.8 ±0.6
18.4 ±0.5
19.0 ±0.6
19.5 ±0.5
> 16
> 16
> 15
> 16
at mid Tilt
over all Tilts
Side lobe suppression for first side lobe
above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
37 ±4
36 ±3
34 ±3
32 ±3
8.9 ±0.8
8.0 ±0.6
7.1 ±0.5
6.4 ±0.3
±31
±31
±31
±32
VSWR
< 1.5
Horizontal beam centers (°)
Cross polar isolation (dB)
≥ 28
Port to port isolation(dB)
≥ 25
Front to back ratio, ±30° (dB)
> 28
> 28
> 28
> 29
Cross polar ratio at boresight (dB)
> 15
> 16
> 15
> 16
Max. effective power per port (W)
250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W)
900 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
Antenna dimensions (H x W x D) (mm)
2099 x 399 x 196
Packing dimensions (H x W x D) (mm)
2285 x 465 x 250
Antenna weight (kg)
(652)
Mechanical Properties
28.5
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
40.9 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
570 (at 150 km/h)
Lateral:
340 (at 150 km/h)
Maximum: 725 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
2099
Fiberglass
1383
Radome material
200
Survival wind speed (km/h)
250
Connector
8 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0 - 12°
2.1 kg
1 (Separate packing)
272
64
Accessories
Product
List
Product
Category
AMB4519R6v06
2MXX-1695-2690/1695-2690-33/33-19i/19i-M/M-R
EasyRET Dual-band Dual-Beam Antenna with 4 Integrated RCUs 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Ty2
y2
y4
y1
y3
HWxxxx……By1
HWxxxx……By3
HWxxxx……Ty4
y - Yellow T - Top array
B - Bottom array
273
Product
List
Product
Category
AMB4519R6v06
2MXX-1695-2690/1695-2690-33/33-19i/19i-M/M-R
EasyRET Dual-band Dual-Beam Antenna with 4 Integrated RCUs 2.0m
Pattern sample for reference
1695 - 2690 MHz
(By3)
1695 - 2690 MHz
(Ty2)
1695 - 2690 MHz
(Ty4)
1695 - 2690 MHz
(By1)
274
Product
List
Product
Category
AMB4520R9v06
2MXX-1695-2690/1695-2690-33/33-19.5i/19.5i-M/M-R
EasyRET Dual-band Dual-Beam Antenna with 4 Integrated RCUs 2.6m
Antenna Specifications
Electrical Properties
2 x (1695 - 2690) (By1/By3/Ty2/Ty4)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
at mid Tilt
Top
over all Tilts
Gain (dBi)
Bottom
18.5
19.0
19.4
19.9
18.3±0.7
18.8±0.7
19.2±0.7
19.7±0.7
at mid Tilt
over all Tilts
18.8
19.3
19.7
20.2
18.6±0.7
19.1±0.7
19.5±0.7
20.0±0.7
> 16
> 16
> 15
> 16
Side lobe suppression for first side lobe
above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
37 ±4
36 ±3
34 ±3
32 ±3
7.3 ±0.7
6.5 ±0.5
5.8 ±0.4
5.2 ±0.3
±32
±32
±32
±32
VSWR
< 1.5
Horizontal beam centers (°)
Cross polar isolation (dB)
≥ 28
Port to port isolation(dB)
≥ 25
Front to back ratio, ±30° (dB)
> 28
> 28
> 28
> 29
Cross polar ratio at boresight (dB)
> 15
> 15
> 15
> 15
Max. effective power per port (W)
250 (at 50℃ ambient temperature)
Max. effective power whole antenna (W)
1000 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
68
Antenna dimensions (H x W x D) (mm)
2550 x 399 x 196
Packing dimensions (H x W x D) (mm)
2820 x 470 x 240
Antenna weight (kg)
(601)
Mechanical Properties
32.4
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
45.9 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2550
50 - 115
1885
Mast diameter supported (mm)
Frontal:
710 (at 150 km/h)
Lateral:
420 (at 150 km/h)
Maximum: 910 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
8 x 4.3-10 Female
Connector position
Bottom
64
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0-8°
3.1 kg
1 (Separate packing)
275
Product
List
Product
Category
AMB4520R9v06
2MXX-1695-2690/1695-2690-33/33-19.5i/19.5i-M/M-R
EasyRET Dual-band Dual-Beam Antenna with 4 Integrated RCUs 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Ty2
y2
y4
y1
y3
HWxxxx……By1
HWxxxx……By3
HWxxxx……Ty4
y - Yellow T - Top array
B - Bottom array
276
Product
List
Product
Category
AMB4520R9v06
2MXX-1695-2690/1695-2690-33/33-19.5i/19.5i-M/M-R
EasyRET Dual-band Dual-Beam Antenna with 4 Integrated RCUs 2.6m
Pattern sample for reference
1695 - 2690 MHz
(Ty4)
1695 - 2690 MHz
(Ty2)
1695 - 2690 MHz
(By3)
1695 - 2690 MHz
(By1)
277
Product
List
Product
Category
AMB4521R0v06
3MX-1710-2200-22-21i-M-R
EasyRET Single-Band Tri-Beam Antenna with 3 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
1710 – 2200 (b1/b2/b3)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
+45° , -45°
2 - 12 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
at mid Tilt (M beam)
20.3
20.8
over all Tilts (M beam)
20.1 ±0.6
20.6 ±0.5
at mid Tilt (L and R beam)
18.7
19.5
over all Tilts (L and R beam)
18.5 ±0.6
19.3 ±0.5
> 17
> 17
23 ±2
21 ±1.4
Side lobe suppression for first side lobe above main
beam (dB)
Horizontal 3dB beam width (°) (M beam)
Horizontal 3dB beam width (°) (L and R beam)
Vertical 3dB beam width (°)
28 ±2
24 ±1.4
7.5 ±0.5
7.0 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
Same beam: ≥ 25
Beam to beam isolation (dB)
≥ 18
Front to back ratio , ±30° (dB)
> 29
Cross polar ratio at boresight (dB)
> 17
Max. effective power per port (W)
> 30
> 17
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
1499 x 449 x 115
Packing dimensions (H x W x D) (mm)
1835 x 510 x 185
Antenna weight (kg)
22.6
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(57)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
34.6 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1499
50 - 115
1385
Mast diameter supported (mm)
Frontal:
715 (at 150 km/h)
Lateral:
85 (at 150 km/h)
Maximum: 715 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
6 x 4.3-10 Female
Bottom
57
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt:
0 - 16 °
2.1 kg
1
(Separate packing)
278
Product
List
Product
Category
AMB4521R0v06
3MX-1710-2200-22-21i-M-R
EasyRET Single-Band Tri-Beam Antenna with 3 Integrated RCUs - 1.4m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx..….b1
b1
b3
HWxxxx..….b2
HWxxxx..….b3
b2
b - Blue
Pattern sample for reference
1710 - 2200 MHz
(b3-30)
1710 - 2200 MHz
(b2)
279
1710 - 2200 MHz
(b1+30)
Product
List
Product
Category
AMB4519R5v06
2MXXX-690-960/1695-2200/1695-2200-65/33/33-17i/19i/19i-M/M/M-R
EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
690 – 960 (r1)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
Polarization
0 - 10 , continuously adjustable
Electrical downtilt (°)
at mid tile
Gain (dBi)
880 - 960
+45° , -45°
over all tilts
Side lobe suppression for first side
lobe above main beam (dB)
15.8
16.2
16.4
16.6
15.7 ±0.5
16.0 ±0.5
16.3 ±0.5
16.5 ±0.5
> 16
> 16
> 16
> 16
Horizontal 3dB beam width (°)
65 ±4.0
63 ±4.0
62 ±3.0
60 ±3.0
Vertical 3dB beam width (°)
8.5 ±0.7
7.8 ±0.5
7.5 ±0.5
7.2 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation (dB)
≥ 30 (690 - 960 // 1695 - 2690)
Front to back ratio, ±30° (dB)
> 23
> 23
> 23
> 23
Cross polar ratio (dB)
> 17
> 17
> 17
> 17
0°
Max. effective power per port (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
Frequency range (MHz)
2 x (1695 - 2200) (Bb1/Bb3/Tb2/Tb4)
1695 - 1880
1850 - 1990
Polarization
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Bottom
Gain (dBi)
Top
at mid tile
over all tilts
at mid tile
17.6
18.0
18.5
17.4 ±0.6
17.9 ±0.6
18.3 ±0.6
17.2
17.6
18.0
17.0 ±0.6
17.4 ±0.5
17.8 ±0.5
> 15
> 15
> 15
34 ±3.0
32 ±3.0
30 ±3.0
Bottom
7.6 ±0.7
7.1 ±0.7
6.6 ±0.7
Top
7.6 ±0.7
7.1 ±0.7
6.6 ±0.7
over all tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam
width (°)
1920 - 2200
+45° , -45°
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Beam to beam isolation (dB)
Interband isolation (dB)
≥ 18
≥ 30 (690 - 960 // 1695 - 2690)
> 26
Front to back ratio, ±30° (dB)
Cross polar ratio at boresight (dB)
> 15
Max. effective power per port (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
280
Product
List
Product
Category
AMB4519R5v06
2MXXX-690-960/1695-2200/1695-2200-65/33/33-17i/19i/19i-M/M/M-R
EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m
68
Antenna dimensions (H x W x D) (mm)
2685 x 359 x 178
Packing dimensions (H x W x D) (mm)
2985 x 425 x 255
Antenna weight (kg)
34.5
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(796)
Mechanical Properties
54.1 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
1837
Operational temperature (℃)
Frontal :
910 (at 150 km/h)
Lateral:
275 (at 150 km/h)
Maximum: 960 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2685
Mast diameter supported (mm)
10 x 4.3-10 Female
Connector position
Bottom
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0-8°
3.1 kg
1 (Separate packing)
52
Accessories
Pattern sample for reference
690 - 960 MHz (r1)
1695 - 2200 MHz (Tb4)
1695 - 2200 MHz (Bb3)
1695 - 2200 MHz (Tb2)
1695 - 2200 MHz (Bb1)
281
Product
List
Product
Category
AMB4519R5v06
2MXXX-690-960/1695-2200/1695-2200-65/33/33-17i/19i/19i-M/M/M-R
EasyRET Hybrid Penta-beam Antenna with 5 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……Tb2
HWxxxx……Bb1
b2
b4
b1
b3
HWxxxx…..….r1
HWxxxx……Bb3
HWxxxx……Tb4
r - Red
T - Top array
282
b - Blue
B - Bottom array
Product
List
r1
Product
Category
AMB4519R23v06
2MXXX-1695-2690/1695-2690/1695-2690-65/33/33-17.5i/18.5i/18.5iM/M/M-R
EasyRET Hybrid Multi-beam Antenna with 5 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
Frequency range (MHz)
1695 - 2690 (y5)
1695 - 1990
1920 - 2200
2200 - 2490
Polarization
+45° , -45°
2 - 12 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
2490 - 2690
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.2
16.7
16.9
16.7
16.1 ±0.7
16.5 ±0.5
16.7 ±0.6
16.5 ±0.8
> 17
> 17
> 17
> 17
62 ±4
61 ±3
60 ±5
59 ±5
9.2 ±0.7
8.3 ±0.6
7.3 ±0.5
6.9 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation (dB)
≥ 28
Front to back ratio total, ±30° (dB)
> 22
> 22
> 22
> 22
Cross polar ratio at boresight (dB)
> 18
> 18
> 16
> 18
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
Frequency range (MHz)
2 x (1695 - 2690) (By1/Ty2/By3/Ty4)
1695 - 1990
1920 - 2200
2200 - 2490
Polarization
2490 - 2690
+45° , -45°
Electrical downtilt (°)
at mid Tilt
2 - 12 , continuously adjustable , each band separately
17.3
18.0
18.5
18.2
17.1 ±0.8
17.8 ±0.8
18.3 ±0.8
18.0 ±0.8
Side lobe suppression for first side
lobe above main beam (dB)
> 16
> 16
> 16
> 15
Horizontal 3dB beam width (°)
36 ±4
32 ±3
31 ±2
30 ±2
9.9 ±0.8
9.1 ±0.7
7.8 ±0.5
7.2 ±0.5
±27
±24
Gain (dBi)
over all Tilts
Vertical 3dB beam width (°)
VSWR
Horizontal beam centers (°)
< 1.5
±30
±28
Cross polar isolation (dB)
≥ 25
Beam to Beam isolation (dB)
≥ 18
Interband isolation (dB)
≥ 28
Front to back ratio total, ±30° (dB)
> 25
> 26
> 28
> 28
Cross polar ratio at boresight (dB)
> 15
> 15
> 16
> 15
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
283
Product
List
Product
Category
AMB4519R23v06
2MXXX-1695-2690/1695-2690/1695-2690-65/33/33-17.5i/18.5i/18.5iM/M/M-R
EasyRET Hybrid Multi-beam Antenna with 5 Integrated RCUs - 2.0m
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2009 x 499 x 206
Packing dimensions (H x W x D) (mm)
2360 x 550 x 245
Antenna weight (kg)
39.5
Clamps weight (kg)
6.3 (2 units)
54 (Included clamps)
Mast diameter supported (mm)
(530)
Antenna packing weight (kg)
68
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Frontal:
730 (at 150 km/h)
Lateral:
380 (at 150 km/h)
Maximum: 955 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2009
-40 .. +65
1420
Operational temperature (℃)
10 x 4.3-10 Female
Connector position
Bottom
59
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0 - 12°
3.1 kg
1 (Separate packing)
Pattern sample for reference
1695 - 2690 MHz (Ty4)
1695 - 2690 MHz(Ty2)
1695 - 2690 MHz (y5)
1695 - 2690 MHz(By3)
1695 - 2690 MHz (By1)
284
Product
List
Product
Category
AMB4519R23v06
2MXXX-1695-2690/1695-2690/1695-2690-65/33/33-17.5i/18.5i/18.5iM/M/M-R
EasyRET Hybrid Multi-beam Antenna with 5 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx…..Ty2
HWxxxx…..By1
y2
y4
y1
y3
HWxxxx…..By3
HWxxxx…..Ty4
y5
HWxxxx…..y5
y - Yellow
T - Top array
285
B -Bottom array
Product
List
Product
Category
AMB4519R13v06
2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/3315.5i/15.5i/18.5i/18.5i-M/M/M/M-R
EasyRET Hybrid Hexa-beam Antenna with 6 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
Gain (dBi)
2- 12, continuously adjustable , each band separately
at mid Tilt
14.9
15.0
15.1
15.3
over all Tilts
14.7 ±0.5
14.8 ±0.4
14.9 ±0.4
15.0 ±0.5
> 15
> 16
> 16
> 15
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
69 ±6
67 ±6
68 ±5
69 ±5
11.0 ±0.9
9.9 ±0.7
9.7 ±0.6
9.3 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Port to port isolation(dB)
≥ 25
Front to back ratio total, ±30° (dB)
> 22
> 22
> 23
> 23
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
Frequency range (MHz)
2 x (1695 - 2690) (By1/Ty2/By3/Ty4)
1695 - 1990
1920 - 2200
Polarization
Electrical downtilt (°)
Gain
(dBi)
2200 - 2490
2490 - 2690
+45° , -45°
Top
Botto
m
2 - 12 , continuously adjustable , each band separately
at mid Tilt
17.3
18.0
18.0
17.8
over all Tilts
17.1 ±0.8
17.8 ±0.5
17.8 ±0.7
17.6 ±0.8
at mid Tilt
17.6
18.3
18.3
18.1
over all Tilts
17.4 ±0.8
18.1 ±0.5
18.1 ±0.5
17.9 ±0.8
> 16
> 16
> 16
> 15
36 ±4
33 ±3
33 ±3
31 ±3
9.8 ±0.9
8.8 ±0.7
7.8 ±0.6
7.1 ±0.5
±29
±29
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
VSWR
Horizontal beam centers (°)
< 1.5
±28
±29
Cross polar isolation (dB)
≥ 25
Port to port isolation(dB)
≥ 25
Front to back ratio total, ±30° (dB)
> 24
> 26
> 26
> 26
Cross polar ratio at boresight (dB)
> 15
> 18
> 18
> 16
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
286
Product
List
Product
Category
AMB4519R13v06
2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/3315.5i/15.5i/18.5i/18.5i-M/M/M/M-R
EasyRET Hybrid Hexa-beam Antenna with 6 Integrated RCUs - 2.0m
Mechanical Properties
2009 x 499 x 206
Packing dimensions (H x W x D) (mm)
2360 x 550 x 245
Antenna weight (kg)
40.5
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
68
(530)
Antenna dimensions (H x W x D) (mm)
55.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
1420
Frontal:
730 (at 150 km/h)
Lateral:
380 (at 150 km/h)
Maximum: 955 (at 150 km/h)
Wind load (N)
200
Survival wind speed (km/h)
2009
Radome material
250
Connector
12 x 4.3-10 Female
Connector position
Bottom
59
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0 - 12°
3.1 kg
1 (Separate packing)
Pattern sample for reference
1695 - 2690 MHz
(By3)
1695 - 2690 MHz
(By1)
1695 - 2690 MHz
(Ty4)
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(Ty2)
287
Product
List
Product
Category
AMB4519R13v06
2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/3315.5i/15.5i/18.5i/18.5i-M/M/M/M-R
EasyRET Hybrid Hexa-beam Antenna with 6 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx………y2
HWxxxx……. ..y1
y2
y4
y1
y3
HWxxxx….. …Lr1
HWxxxx……...Rr2
HWxxxx……….y3
r1
HWxxxx……….y4
y - Yellow
T - Top array
288
r2
r - Red
B - Bottom array
Product
List
Product
Category
AMB4519R9v06
2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/3316.5i/16.5i/19i/19i-M/M/M/M-R
EasyRET Hybrid Hexa-beam Antenna with 6 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
Polarization
2 - 12, continuously adjustable , each band separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
880 - 960
+45° , -45°
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.7
15.9
16.0
16.1
15.5 ±0.5
15.7 ±0.5
15.8 ±0.5
15.9 ±0.5
> 15
> 16
> 16
> 16
69 ±5
68 ±5
68 ±6
69 ±6
8.7 ±0.6
8.0 ±0.4
7.7 ±0.4
7.3 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation(dB)
≥ 25
Front to back ratio, ±30° (dB)
> 22
> 22
> 22
> 22
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
Frequency range (MHz)
2 x (1695 - 2690) (By1/Ty2/By3/Ty4)
1695 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
18.3
18.9
18.8
18.7
18.1 ±0.8
18.7 ±0.5
18.6 ±0.8
18.5 ±0.8
18.6
19.2
19.1
19.0
18.4 ±0.8
19.0 ±0.5
18.9 ±0.8
18.8 ±0.8
> 15
> 15
> 15
> 15
36 ±4
33 ±3
34 ±3
31 ±3
Vertical 3dB beam width (°)
7.1 ±0.6
6.4 ±0.5
5.6 ±0.3
5.4 ±0.4
Horizontal beam centers (°)
±28
±30
±30
±29
Top
Gain (dBi)
Bottom
at mid Tilt
over all Tilts
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Beam to beam isolation(dB)
≥ 25
Front to back ratio, ±30° (dB)
> 24
> 27
> 27
> 26
Cross polar ratio at boresight (dB)
> 15
> 16
> 16
> 15
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
289
Product
List
Product
Category
AMB4519R9v06
2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/3316.5i/16.5i/19i/19i-M/M/M/M-R
EasyRET Hybrid Hexa-beam Antenna with 6 Integrated RCUs - 2.6m
68
Antenna dimensions (H x W x D) (mm)
2550 x 499 x 206
Packing dimensions (H x W x D) (mm)
2810 x 560 x 250
Antenna weight (kg)
49.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(621)
Mechanical Properties
66.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
945 (at 150 km/h)
Lateral:
495 (at 150 km/h)
Maximum: 1235 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
2550
Fiberglass
1870
Radome material
200
Survival wind speed (km/h)
250
Connector
12 x 4.3-10 Female
Connector position
Bottom
Accessories
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0 - 8°
3.1 kg
1 (Separate packing)
59
Item
Pattern sample for reference
1695 - 2690 MHz
(By3)
1695 - 2690 MHz
(By1)
1695 - 2690 MHz
(Ty4)
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(Ty2)
290
Product
List
Product
Category
AMB4519R9v06
2MXXXX-690-960/690-960/1695-2690/1695-2690-65/65/33/3316.5i/16.5i/19i/19i-M/M/M/M-R
EasyRET Hybrid Hexa-beam Antenna with 6 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx………y2
HWxxxx……. ..y1
y2
y4
y1
y3
HWxxxx….. …Lr1
HWxxxx……...Rr2
HWxxxx……….y3
r1
HWxxxx……….y4
y - Yellow
T - Top array
291
r2
r - Red
B - Bottom array
Product
List
Product
Category
AMB4519R24v06
2MXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/33/33-15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M-R
EasyRET Hybrid Multi-beam Antenna with 7 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
Frequency range (MHz)
690 - 960 (r1)
690 - 803
790 - 862
Polarization
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 x (1695 - 2690) (By5/Ty6)
824 - 894
880 - 960
1695 - 1990
1920 - 2200
2200 - 2490 2490 - 2690
+45° , -45°
+45° , -45°
2 - 12, continuously adjustable
2 - 12 , continuously adjustable , each band
separately
14.7
15.0
15.1
15.2
16.2
16.7
16.9
16.7
14.5 ±0.5
14.8 ±0.4
14.9 ±0.4
15.0 ±0.5
16.1 ±0.7
16.5 ±0.5
16.7 ±0.6
16.5 ±0.8
> 16
> 16
> 16
> 16
> 17
> 17
> 17
> 17
64 ±6
63 ±7
61 ±6
62±7
62 ±4
61 ±3
60 ±5
59 ±5
11.0 ±0.9
10.0 ±0.7
9.7 ±0.6
9.1 ±0.5
9.2 ±0.7
8.3 ±0.6
7.3 ±0.5
6.9 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
< 1.5
≥ 25
Interband isolation (dB)
≥ 25
≥ 28
Front to back ratio total, ±30° (dB)
> 21
> 22
> 22
> 22
> 22
> 22
> 22
> 22
Cross polar ratio at boresight (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 16
> 18
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
Frequency range (MHz)
2 x (1695 - 2690) (By1/Ty2/By3/Ty4)
1695 - 1990
1920 - 2200
Polarization
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
2200 - 2490
at mid Tilt
over all Tilts
17.3
18.0
18.5
18.2
17.1 ±0.8
17.8 ±0.8
18.3 ±0.8
18.0 ±0.8
Side lobe suppression for first side
lobe above main beam (dB)
> 16
> 16
> 16
> 15
Horizontal 3dB beam width (°)
36 ±4
32 ±3
31 ±2
30 ±2
9.9 ±0.8
9.1 ±0.7
7.8 ±0.5
7.2 ±0.5
±27
±24
Vertical 3dB beam width (°)
VSWR
Horizontal beam centers (°)
< 1.5
±30
±28
Cross polar isolation (dB)
≥ 25
Beam to Beam isolation (dB)
≥ 18
Interband isolation (dB)
≥ 28
Front to back ratio total, ±30° (dB)
> 25
> 26
> 28
> 28
Cross polar ratio at boresight (dB)
> 15
> 15
> 16
> 15
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
292
Product
List
Product
Category
AMB4519R24v06
2MXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/33/33-15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M-R
EasyRET Hybrid Multi-beam Antenna with 7 Integrated RCUs - 2.0m
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2009 x 499 x 206
Packing dimensions (H x W x D) (mm)
2360 x 550 x 245
Antenna weight (kg)
68
44.1
6.3 (2 units)
Antenna packing weight (kg)
(530)
Clamps weight (kg)
58.5 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
1420
Operational temperature (℃)
Frontal:
730 (at 150 km/h)
Lateral:
380 (at 150 km/h)
Maximum: 955 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
2009
Mast diameter supported (mm)
14 x 4.3-10 Female
Bottom
59
Connector position
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0 - 12°
3.1 kg
1 (Separate packing)
Pattern sample for reference
1695 - 2690 MHz
(Ty4)
1695 - 2690 MHz
(Ty2)
690 - 960 MHz
(r1)
1695 - 2690 MHz
(By3)
1695 - 2690 MHz
(By1)
1695 - 2690 MHz
(By5/Ty6)
293
Product
List
Product
Category
AMB4519R24v06
2MXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/33/33-15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M-R
EasyRET Hybrid Multi-beam Antenna with 7 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWxxxx……….Ty2
HWxxxx…….....By1
HWxxxx…….....Ty6
y6
y2
y4
y5
y1
y3
HWxxxx………..r1
g
HWxxxx……….By3
HWxxxx……….Ty4
g HWxxxx…….....By5
r - Red
B - Bottom array
294
r1
y - Yellow
T - Top array
Product
List
Product
Category
AMB4519R18v06
2MXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/33/33-15.5i/15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Octa-beam Antenna with 8 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 803
790 862
Polarization
Electrical downtilt (°)
824 894
2 x (1427 - 2690) (By5/Ty6)
880 –
960
1427 1518
1695 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
+45° , -45°
2 - 12, continuously adjustable , each
band separately
2 - 12 , continuously adjustable , each band separately
at mid Tilt
14.7
15.0
15.1
15.2
14.9
16.2
16.7
16.9
16.7
over all Tilts
14.5
±0.5
14.8
±0.4
14.9
±0.4
15.0
±0.5
14.7
±0.5
16.1 ±0.7
16.5 ±0.5
16.7 ±0.6
16.5 ±0.8
> 16
> 16
> 16
> 16
> 17
> 17
> 17
> 17
> 17
Horizontal 3dB beam width (°)
72 ±7
71 ±7
70 ±7
69 ±6
71 ±5
62 ±4
61 ±3
60 ±5
59 ±5
Vertical 3dB beam width (°)
11.0±
0.9
10.0±
0.7
9.7 ±
0.6
9.1 ±
0.5
11.3
±0.8
9.2 ±0.7
8.3 ±0.6
7.3 ±0.5
6.9 ±0.5
Gain (dBi)
Side lobe suppression for first side
lobe above main beam (dB)
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 25
≥ 25
Interband isolation (dB)
≥ 25
≥ 28
Front to back ratio total, ±30° (dB)
Cross polar ratio at boresight (dB)
Max. effective power per port (W)
≥ 28
> 21
> 22
> 22
> 22
> 21
> 22
> 22
> 22
> 22
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 16
> 18
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
Frequency range (MHz)
2 x (1695 - 2690) (By1/By3/Ty2/Ty4)
1695 - 1990
1920 - 2200
Polarization
2490 - 2690
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
2200 - 2490
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
17.3
18.0
18.5
18.2
17.1 ±0.8
17.8 ±0.8
18.3 ±0.8
18.0 ±0.8
> 16
> 16
> 16
> 15
36 ±4
32 ±3
31 ±2
30 ±2
9.9 ±0.8
9.1 ±0.7
7.8 ±0.5
7.2 ±0.5
±27
±24
VSWR
Horizontal beam centers (°)
< 1.5
±30
±28
Cross polar isolation (dB)
≥ 25
Beam to Beam isolation (dB)
≥ 18
Interband isolation (dB)
≥ 28
Front to back ratio total, ±30° (dB)
> 25
> 26
> 28
> 28
Cross polar ratio at boresight (dB)
> 15
> 15
> 16
> 15
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna : 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
295
Product
List
Product
Category
AMB4519R18v06
2MXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/33/33-15.5i/15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Octa-beam Antenna with 8 Integrated RCUs - 2.0m
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2009 x 499 x 206
Packing dimensions (H x W x D) (mm)
2360 x 550 x 245
Antenna weight (kg)
68
46.8
Clamps weight (kg)
6.3 (2 units)
62 (Included clamps)
Mast diameter supported (mm)
(530)
Antenna packing weight (kg)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
-40 .. +65
1420
2009
Operational temperature (℃)
Frontal:
730 (at 150 km/h)
Lateral:
380 (at 150 km/h)
Maximum: 955 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
16 x 4.3-10 Female
Connector position
Bottom
59
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt:
0 - 12°
3.1 kg
1 (Separate packing)
Integrated RET S/N:
HWxxxx……….y2
HWxxxx……....y1
HWxxxx……....r1
h
y6
y2
y4
y5
y1
y3
HWxxxx……….y6
HWxxxx……….r2
g
HWxxxx……….y3
r1
g HWxxxx……....y4
r2
h HWxxxx……….y5
r - Red
L - Left array
296
y - Yellow
R - Right array
B - Bottom array
Product
List
T - Top array
Product
Category
AMB4519R18v06
2MXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/33/33-15.5i/15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Octa-beam Antenna with 8 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (KA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(Ty4)
1695 - 2690 MHz
(Ty2)
1427- 2690 MHz
(By5/Ty6)
1695 - 2690 MHz
(By3)
1695 - 2690 MHz
(By1)
297
Product
List
Product
Category
AMB4519R29v06
2M06X-2x690-960/2x1695-2690/2x1695-2690-4x65/2x332x16.5i/2x17.5i/2x19i-6xM-R
EasyRET Hybrid Octa-beam Antenna with Integrated RCUs - 2.6m
Preliminary Issue
Electrical Properties
Frequency range (MHz)
Polarization
Electrical downtilt (°)
Gain (dBi)
2 x (690 - 960)
2 x (1695 - 2690)
2 x (1695 - 2690)
+45° , -45°
+45° , -45°
+45° , -45°
2 - 12
2 - 12
2 - 12
16.2
17.5
19.0
Side lobe suppression for first side
lobe above main beam (dB)
15
15
15
Horizontal 3dB beam width (°)
65
65
32
Vertical 3dB beam width (°)
7.6
6.0
6.0
VSWR
< 1.5
Front to back ratio total, ±30° (dB)
> 23
> 25
> 25
Cross polar ratio at boresight (dB)
> 15
> 15
> 15
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2550 x 499 x 206
Antenna net weight (kg)
55
Mechanical downtilt (°)
0-8
Connector
16 x 4.3-10 Female
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
298
Product
List
Product
Category
B. Passive Antenna
FDD + NR\TDD Antenna
3dB
Frequency Range Horizontal
Electrical
Gain (dBi)
Tilt Method
(MHz)
Beam
Downtilt (o)
o
Width ( )
Connector
Dimension(mm)
Model
Page
6 x 4.3-10 Female
2 Fixed
2–12/2–12/ EasyRET2.0 1 x MQ4 Male + 849 x 399 x 196
1 x MQ5 Male
2–12
AHP4519R1v06
301
10 x 4.3-10 Female
1 x MQ4 Male + 849 x 399 x 196
1 x MQ5 Male
A094519R2v06
306
2-16/
10 x 4.3-10 Female
2-12/2-12/
1599 x 399 x 196
EasyRET2.0 1 x MQ4 Male +
A094519R3v06
2-12/2-12/
1 x MQ5 Male
2–12
311
690-960/
2x(1695-2690)/
4x(3300-3800)
4x65
12.5i/
2x15.5i/
19i
690-960/
4x(1695-2690)/
4x(3300-3800)
6x65
12.5i/
4x12.5i/
19i
690-960/
4x(1695-2690)/
4x(3300-3800)
6x65
14.5i/
4x15.5i/
19i
2x690-960/
2x1695-2690/
2x2300-3800
6x65
2x8.5i/
2x11i/
2x11i
2x(690-894)/
4x(2300-2690)
3x65
16i/16i/
18i
2–12/2-12/
2-12/2-12/ EasyRET2.0 13 x 4.3-10 Female 2009 x 499 x 206 ASI4518R54v06
2-12/2-12
319
5x65
2x15.5i/
2x17.5i/
21i
2-12/2-12/
8 x 4.3-10 Female
2-12/2-12/
2099 x 449 x 196
EasyRET2.0 1 x MQ4 Male +
*AOC4521R01v06
2-12/2-12/
1 x MQ5 Male
2-12/2-12
323
6x65
2x14.5i/
2x17.5i/
17.5i/
21i
10 x 4.3-10 Female
0-14/0-14/
1509 x 499 x 206
2-12/2-12 EasyRET2.0 1 x MQ4 Male +
A094521R4v06
1 x MQ5 Male
2-12/2-12
326
6x65
2x15.5i/
2x17.5i/
17.5i/
17i
10 x 4.3-10 Female
0-10/0-10/
2099 x 449 x 196
2-12/2-12 EasyRET2.0 1 x MQ4 Male +
ASI4518R42v06
1 x MQ5 Male
2-12/2-12
332
7x65
2x15.5i/
2x18i/
2x18i/
22i
2-12/2-12
2-12/2-12
2-12/2-12
2-12
7x65
2x16.5i/
2x17.5i/
2x17.5i/
21i
2x690-960/
2x1695-2690/
4x2490-3800
2x(690-960)/
2x (1427-2690)/
1695-2690/
4x(3300-3800)
690-960/
690-960/
1427-2690/
1427-2690/
1695-2690/
2300-3800
2x690-960/
2x1427-2690/
2x1695-2690/
4x2300-3800
2x(690-960)/
2x(1427-2690)/
2x(1695-2690)/
4x(2300-3800)
2 Fixed
2 Fixed
2-12
EasyRET2.0
0 fixed
3 fixed
3 fixed
2-12/2-12
2-12/2-12
2-12/2-12
2-12
12 x 4.3-10 Female 485 x 369 x 149
ASI451000v06
316
EasyRET2.0
12 x 4.3-10 Female
2099 x 469 x 206
1 x MQ4 Male +
A104521R03v06
1 x MQ5 Male
339
EasyRET2.0
12 x 4.3-10 Female
1 x MQ4 Male + 2550 x 469 x 206 A104521R0v06
1 x MQ5 Male
345
* Preliminary Issue
299
Product
Category
FDD + NR\TDD Antenna
3dB
Frequency Range Horizonta
Electrical
Gain (dBi)
Tilt Method
(MHz)
l Beam
Downtilt (o)
Width (o)
2x(690-960)/
2x(1427-2200)/
2x(2490-2690)/
1695-2690/
4x(3300-3800)
2x(690-960)/
1427-2690/
2x(1695-2200)/
2x(2490-2690)/
2300-3800
2x(690-960)/
1427-2690/
2x(1695-2200)/
2x(2490-2690)/
4x(2300-3800)
690-862/
880-960/
690-960/
2x1427-2690/
4x1695-2690/
4x2300-3800
2x(690-960)/
2x(1427-2690)/
1695-2690/
4x(2300-2690)/
4x(3300-3800)
2x690-960/
2x1427-2690/
2x1695-2690/
4x2300-3800/
4x2300-3800
2x690-960/
2x1427-2690/
2x1695-2200/
2x2490-2690/
4x2300-3800/
4x2300-3800
2x690-960/
2x1427-2690/
2x1695-2690/
4x2300-3800/
4x2300-3800
Connector
Dimension(mm)
Model
Page
8x65
2x14.5i/
2x16i/
2x17i/
17i/
21i
0-14/0-14/
14 x 4.3-10 Female
2-12/2-12
EasyRET2.0 1 x MQ4 Male + 1509 x 499 x 206 A114521R1v06
2-12/2-12
1 x MQ5 Male
2-12/2-12
351
8x65
2x15.5i/
17.5i/
2x17i/
2x17i/
17i
0-10/0-10/
14 x 4.3-10 Female
2-12/2-12
EasyRET2.0 1 x MQ4 Male + 2099 x 449 x 196 AOC4518R8v06
2-12/2-12
1 x MQ5 Male
2-12/2-12
357
8x65
2x16.5i/
17.5i/
2x17i/
2x17/
21i
0-10/0-10/
14 x 4.3-10 Female
2-12/2-12
EasyRET2.0 1 x MQ4 Male + 2769 x 449 x 196 A114521R5v06
2-12/2-12
1 x MQ5 Male
2-12/2-12
364
10x65
15.5i/
16i/
16i/
2x18i/
4x18i/
21i
2-12/2-12
2-12/2-12
2-12/2-12
2-12/2-12
2-12/2-12
372
7x65
2x15.5i/
2x17.5i/
17.5i/
16i/
21i
0-10/0-10/
10 x 4.3-10 Female
2-12/2-12
EasyRET2.0 2 x MQ4 Male + 2199 x 449 x 196 A134521R0v06
2-12/2-12
2 x MQ5 Male
2-12
375
8x65
2x16.5i/
2x18i/
2x18i/
22i/
22i
2-12/2-12
2-12/2-12
2-12/2-12
2-12/2-12
12 x 4.3-10 Female
2 x MQ4 Male + 2550 x 499 x 206 A144521R01v06
2 x MQ5 Male
381
10x65
2x15.5i/
2x17.5i/
2x16.5i/
2x17i/
22i/
22i
2-12/2-12
16 x 4.3-10 Female
2-12/2-12
2-12/2-12 EasyRET2.0 2x MQ4 Male + 2099 x 499 x 206 *A164522R01v06
2x MQ5 Male
2-12/2-12
2-12/2-12
387
8x65
2x15.5i/
2x18i/
2x18i/
22i/
22i
2-12/2-12
2-12/2-12
2-12/2-12
2-12/2-12
388
EasyRET2.0
EasyRET2.0
EasyRET2.0
18 x 4.3-10 Female
1 x MQ4 Male + 2769 x 469 x 206 *A134521R03v06
1 x MQ5 Male
12 x 4.3-10 Female
2x MQ4 Male + 2099 x 499 x 206 *A144522R02v06
2x MQ5 Male
* Preliminary Issue
300
Product
Category
AHP4519R1v06
D07X-690-960/2x(1695-2690)/4x(3300-3800)-4x65-12.5i/15.5i/
15.5i/19i-4xM-R EasyRET 14-port 1L2H FDD/3.3-3.8GHz 8T8R TDD
Antenna with 3 Integrated RCUs- 0.9m
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
2 Fixed
Electrical downtilt (°)
Gain (dBi)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
11.4 ±0.5
11.6 ±0.5
11.8 ±0.5
12.1 ±0.5
67 ±6
66 ±6
65 ±6
65 ±6
26.9 ±2.3
24.8 ±2.1
23 ±2
20 ±1.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 20
> 21
> 21
> 22
Cross polar ratio (dB)
> 16
> 17
> 17
> 16
0°
Max. effective power per port
(W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690) (Ly1/Ry2)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2490 - 2690
2 – 12, continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
2200 - 2490
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first
side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
13.7
14.2
14.7
15.2
13.6 ±0.5
14.0 ±0.5
14.5 ±0.5
15.0 ±0.5
> 15
> 15
> 15
> 15
66 ±6
65 ±6
63 ±6
62 ±6
14.5 ±1.3
13.2 ±1.1
11.9 ±0.9
10.7 ±0.8
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 20
> 21
> 22
> 22
Cross polar ratio (dB)
> 16
> 17
> 17
> 16
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
301
Product
List
Product
Category
AHP4519R1v06
D07X-690-960/2x(1695-2690)/4x(3300-3800)-4x65-12.5i/15.5i/
15.5i/19i-4xM-R EasyRET 14-port 1L2H FDD/3.3-3.8GHz 8T8R TDD
Antenna with 3 Integrated RCUs- 0.9m
General Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
Polarization
General
parameters
+45° , -45°
2 - 12, continuously adjustable
Electrical downtilt (°)
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each antenna
port (dB)
Calibration
and electrical
parameters
-26 ±2
Max. amplitude tolerance from calibration port to input ports
(dB)
0.9
Max. phase tolerance from calibration port to input ports (°)
7
Ports VSWR
1.5
Co-polarization isolation between ports (dB)
≥ 20
Cross-polarization isolation between ports (dB)
≥ 23
* Max. effective power whole antenna: 800 W (at 50℃ ambient temperature)
5G NR Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
Gain (dBi)
13.4
70
Horizontal 3dB beam width (°)
Single column beam
Front to back ratio (dB)
≥ 23
Cross polar ratio (0°) (dB)
≥ 15
9.2
Vertical 3dB beam width (°)
Radiation
parameters
Side lobe suppression for first side lobe above main
beam (dB)
≥ 15
Gain (dBi)
18.8
65
Horizontal 3dB beam width (°)
NR Broadcast beam
≥ 25
Front to back ratio (dB)
Vertical 3dB beam width (°)
9.2
Side lobe suppression for first side lobe above main beam
(dB)
≥ 15
19
0°direct beam gain (dBi)
NR Service beam
0°direction beam horizontal 3dB beam width (°)
18.5
0°direction beam front to back ratio (dB)
≥ 30
0°direction beam Cross polar ratio (0°) (dB)
≥ 19
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
302
Product
List
Product
Category
AHP4519R1v06
D07X-690-960/2x(1695-2690)/4x(3300-3800)-4x65-12.5i/15.5i/
15.5i/19i-4xM-R EasyRET 14-port 1L2H FDD/3.3-3.8GHz 8T8R TDD
Antenna with 3 Integrated RCUs- 0.9m
Antenna dimensions (H x W x D) (mm)
849 x 399 x 196
Packing dimensions (H x W x D) (mm)
1155 x 485 x 250
Antenna weight (kg)
17.5
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
68
(84)
Mechanical Properties
28.2 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
700
849
Mast diameter supported (mm)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
65
Frontal:
250 (at 150 km/h)
Lateral:
95 (at 150 km/h)
Maximum: 300 (at 150 km/h)
Wind load (N)
Unit: mm
6 x 4.3-10 Female
1 x MQ4 Male + 1 x MQ5 Male
Connector
Connector position
Bottom
Accessories
Item
Model
Description
Weight Units per antenna
Downtilt kit
ASMDT0H02
Mechanical downtilt: 0 - 36°
3.1 kg
1 (Separate packing)
c
y1
RET S/N:
r - Red
L - Left array
RAE S/N:
HWMxxx……Ly1
HWXxxx……..p1
HWMxxx……Ry2
p1 p1 p1 p1
r1
y - Yellow
R - Right array
y2
p - Purple
L CL CR R
HWMxxx……..p1
MQ5-4
p1.L+
MQ5-3
p1.CL+
MQ5-2
p1.CR+
MQ5-1
p1.R+
MQ4-4
p1.L-
MQ4-3
p1.CL-
MQ4-2
p1.CR-
MQ4-1
p1.R-
Physical array & port mapping according to AISG naming convention:
Left - Center Left - Center Right - Right (seen from front of antenna)
303
Product
List
Product
Category
AHP4519R1v06
D07X-690-960/2x(1695-2690)/4x(3300-3800)-4x65-12.5i/15.5i/
15.5i/19i-4xM-R EasyRET 14-port 1L2H FDD/3.3-3.8GHz 8T8R TDD
Antenna with 3 Integrated RCUs- 0.9m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
< 1.5 (when the motor does not work, 12 V)
< 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Power consumption (W)
Adjustment time (full range) (s)
Typ. 40
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
304
Product
List
Product
Category
AHP4519R1v06
D07X-690-960/2x(1695-2690)/4x(3300-3800)-4x65-12.5i/15.5i/
15.5i/19i-4xM-R EasyRET 14-port 1L2H FDD/3.3-3.8GHz 8T8R TDD
Antenna with 3 Integrated RCUs- 0.9m
Pattern sample for reference
690 - 960 MHz
1695 - 2690 MHz
Single column
(3300 - 3800 MHz)
Service 0°
(3300 - 3800 MHz)
5G NR Broadcast
(3300 - 3800 MHz)
305
Product
List
Product
Category
A094519R2v06
D09X-690-960/4x(1695-2690)/4x(3300-3800)-6x65- 12.5i/12.5i/
12.5i/12.5i/12.5i/19i-6xM-REasyRET 18-port 1L4H FDD/3.3-3.8 GHz
8T8R TDD Antenna with 1 Integrate RCU- 0.9m
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
2, Fixed
Electrical downtilt (°)
Gain (dBi)
11.4 ±0.5
11.6 ±0.5
11.8 ±0.6
12.1 ±0.6
Horizontal 3dB beam width
(°)
68 ±6
67 ±6
67 ±6
65 ±6
Vertical 3dB beam width (°)
26.5 ±2.3
23.5 ±2.0
22.5 ±2.0
20.5 ±1.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 20
> 21
> 21
> 22
Cross polar ratio (dB) 0°
> 16
> 17
> 17
> 16
Max. effective power per
port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690) (LBy1/RBy3)
Frequency range (MHz)
1695 1990
Polarization
1920 2200
2490 2690
1695 1990
1920 2200
+45° , -45°
2200 2490
2490 2690
+45° , -45°
2, Fixed
Electrical downtilt (°)
Gain (dBi)
2200 2490
2 x (1695 - 2690) (LTy2/RTy4)
2, Fixed
11.3 ±0.5
11.8 ±0.5
12.4 ±0.5
13.0 ±0.5
11.2 ±0.5
11.7 ±0.5
12.2 ±0.5
12.8 ±0.5
Horizontal 3dB beam width
(°)
63 ± 6
62 ±6
67 ±6
65 ±6
63 ±6
64 ±6
62 ±6
60 ±6
Vertical 3dB beam width (°)
22.5 ±2.5
20.5 ±2.0
18.5 ±1.5
16.3 ±1.2
23 ±2.5
21 ±2.0
18.8 ±1.5
16.5 ±1.2
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 25
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio, ±30° (dB)
> 20
> 21
> 21
> 22
> 20
> 21
> 21
> 22
Cross polar ratio (dB) 0°
> 16
> 17
> 17
> 16
> 16
> 17
> 17
> 16
Max. effective power per
port (W)
Intermodulation IM3 (dBc)
150 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
306
Product
List
Product
Category
A094519R2v06
D09X-690-960/4x(1695-2690)/4x(3300-3800)-6x65- 12.5i/12.5i/
12.5i/12.5i/12.5i/19i-6xM-REasyRET 18-port 1L4H FDD/3.3-3.8 GHz
8T8R TDD Antenna with 1 Integrate RCU- 0.9m
General Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
Polarization
General
parameters
+45° , 45°
2 - 12, continuously adjustable
Electrical downtilt (°)
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each antenna port
(dB)
-26 ±2
Max. amplitude tolerance from calibration port to input ports (dB)
Calibration
and electrical
parameters
0.9
Max. phase tolerance from calibration port to input ports (°)
7
Ports VSWR
1.5
Co-polarization isolation between ports (dB)
≥ 20
Cross-polarization isolation between ports (dB)
≥ 23
* Max. effective power whole antenna: 700 W (at 50℃ ambient temperature)
5G NR Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
Gain (dBi)
13.4
70
Horizontal 3dB beam width (°)
Single column beam
Front to back ratio (dB)
≥ 23
Cross polar ratio (0°) (dB)
≥ 15
9.2
Vertical 3dB beam width (°)
Radiation
parameters
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
Gain (dBi)
18.8
65
Horizontal 3dB beam width (°)
NR Broadcast beam
≥ 25
Front to back ratio (dB)
Vertical 3dB beam width (°)
9.2
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
19
0°direct beam gain (dBi)
NR Service beam
0°direction beam horizontal 3dB beam width (°)
18.5
0°direction beam front to back ratio (dB)
≥ 30
0°direction beam Cross polar ratio (0°) (dB)
≥ 19
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
307
Product
List
Product
Category
A094519R2v06
D09X-690-960/4x(1695-2690)/4x(3300-3800)-6x65- 12.5i/12.5i/
12.5i/12.5i/12.5i/19i-6xM-REasyRET 18-port 1L4H FDD/3.3-3.8 GHz
8T8R TDD Antenna with 1 Integrate RCU- 0.9m
Mechanical Properties
849 x 399 x 196
Packing dimensions (H x W x D) (mm)
1155 x 485 x 250
Antenna weight (kg)
17.3
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
68
(84)
Antenna dimensions (H x W x D) (mm)
28 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
700
849
Mast diameter supported (mm)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
65
Frontal:
250 (at 150 km/h)
Lateral:
95 (at 150 km/h)
Maximum: 300 (at 150 km/h)
Wind load (N)
10 x 4.3-10 Female
1 x MQ4 Male + 1 x MQ5 Male
Connector
Connector position
Bottom
Accessories
Item
Model
Downtilt kit
Description
ASMDT0H02 Mechanical downtilt: 0 - 36°
Weight Units per antenna
3.1 kg
1 (Separate packing)
r1
y4
y2
p1 p1 p1 p1
a
y1
RET S/N:
HWMxxx……p1
L CL CR R
y3
r - Red
y - Yellow
p - Purple
L - Left array
R - Right array
B - Bottom array T - Top array
RAE S/N:
HWXxxx……..p1
MQ5-4
p1.L+
MQ5-3
p1.CL+
MQ5-2
p1.CR+
MQ5-1
p1.R+
MQ4-4
p1.L-
MQ4-3
p1.CL-
MQ4-2
p1.CR-
MQ4-1
p1.R-
Physical array & port mapping according to AISG naming convention:
Left - Center Left - Center Right - Right (seen from front of antenna)
308
Product
List
Product
Category
A094519R2v06
D09X-690-960/4x(1695-2690)/4x(3300-3800)-6x65- 12.5i/12.5i/
12.5i/12.5i/12.5i/19i-6xM-REasyRET 18-port 1L4H FDD/3.3-3.8 GHz
8T8R TDD Antenna with 1 Integrate RCU- 0.9m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 1 (when the motor does not work, 12 V)
< 3.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
Connectors
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
309
Product
List
Product
Category
A094519R2v06
D09X-690-960/4x(1695-2690)/4x(3300-3800)-6x65- 12.5i/12.5i/
12.5i/12.5i/12.5i/19i-6xM-REasyRET 18-port 1L4H FDD/3.3-3.8 GHz
8T8R TDD Antenna with 1 Integrate RCU- 0.9m
Pattern sample for reference
690 - 960 MHz
1695 - 2690 MHz
Single column
(3300 - 3800 MHz)
Service 0°
(3300 - 3800 MHz)
5G NR Broadcast
(3300 - 3800 MHz)
310
Product
List
Product
Category
A094519R3v06
D09X-690-960/4x(1695-2690)/4x(3300-3800)-6x65-14.5i/15.5i/
15.5i/15.5i/15.5i/19i-6xM-R EasyRET 18-port 1L4H FDD/3.3-3.8GHz
8T8R TDD Antenna with 6 Integrated RCUs
Antenna Specifications
Electrical Properties
690 - 960 (r1)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
824 - 894
880 - 960
+45° , -45°
2 - 16 , continuously adjustable
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
13.8
14.0
14.2
14.5
13.6 ±0.5
13.8 ±0.5
14 ±0.5
14.2 ±0.5
> 15
> 15
> 15
> 15
67 ±5
66 ±5
64 ±5
63 ±5
15 ±1.5
13.5 ±1.0
13 ±1.0
12.3 ±1.0
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 23
> 23
> 23
Cross polar ratio (dB)
> 17
> 17
> 17
> 17
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
4 x (1695 - 2690) (LBy1/LTy2/RBy3/RTy4)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2490 - 2690
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Top
Gain (dBi)
2200 - 2490
+45° , -45°
Botto
m
at mid Tilt
over all Tilts
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
13.6
14.1
14.6
15.1
13.5 ±0.5
14.0 ±0.5
14.4 ±0.5
14.8 ±0.5
13.8
14.3
14.8
15.3
13.6 ±0.6
14.1 ±0.5
14.6 ±0.5
15.1 ±0.5
> 15
> 15
> 15
> 15
65 ±6
63 ±6
62 ±5
60 ±6
14.9 ±1.1
13.3 ±1.0
12.0 ±1.0
10.3 ±1.0
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 22
> 23
> 23
> 23
Cross polar ratio (dB)
> 17
> 17
> 17
> 17
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
311
Product
List
Product
Category
A094519R3v06
A094519R3v06
D09X-690-960/4x(1695-2690)/4x(3300-3800)-6x65-14.5i/15.5i/
15.5i/15.5i/15.5i/19i-6xM-R EasyRET 18-port 1L4H FDD/3.3-3.8GHz
8T8R TDD Antenna with 6 Integrated RCUs
General Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
Polarization
General
parameters
+45° , -45°
2 - 12, continuously adjustable
Electrical downtilt (°)
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each
antenna port (dB)
Calibration
and electrical
parameters
-26 ±2
Max. amplitude tolerance from calibration port to input
ports (dB)
0.9
Max. phase tolerance from calibration port to input ports (°)
7
Ports VSWR
1.5
Co-polarization isolation between ports (dB)
≥ 20
Cross-polarization isolation between ports (dB)
≥ 23
* Max. effective power whole antenna: 800 W (at 50℃ ambient temperature)
5G NR Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
Gain (dBi)
13.4
70
Horizontal 3dB beam width (°)
Single column beam
Front to back ratio (dB)
≥ 23
Cross polar ratio (0°) (dB)
≥ 15
9.2
Vertical 3dB beam width (°)
Radiation
parameters
Side lobe suppression for first side lobe above main
beam (dB)
≥ 15
Gain (dBi)
18.8
65
Horizontal 3dB beam width (°)
NR Broadcast beam
≥ 25
Front to back ratio (dB)
Vertical 3dB beam width (°)
9.2
Side lobe suppression for first side lobe above main beam
(dB)
≥ 15
19
0°direct beam gain (dBi)
NR Service beam
0°direction beam horizontal 3dB beam width (°)
18.5
0°direction beam front to back ratio (dB)
≥ 30
0°direction beam Cross polar ratio (0°) (dB)
≥ 19
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
312
Product
List
Product
Category
A094519R3v06
D09X-690-960/4x(1695-2690)/4x(3300-3800)-6x65-14.5i/15.5i/
15.5i/15.5i/15.5i/19i-6xM-R EasyRET 18-port 1L4H FDD/3.3-3.8GHz
8T8R TDD Antenna with 6 Integrated RCUs
Mechanical Properties
1599 x 399 x 196
Packing dimensions (H x W x D) (mm)
1860 x 485 x 240
Antenna weight (kg)
28.5
Clamps weight (kg)
4.2 (2 units)
Antenna packing weight (kg)
68
(224)
Antenna dimensions (H x W x D) (mm)
38.5 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1310
50 - 115
1599
Mast diameter supported (mm)
Frontal:
495 (at 150 km/h)
Lateral:
200 (at 150 km/h)
Maximum: 590 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector position
65
10 x 4.3-10 Female +
1 x MQ4 Male + 1 x MQ5 Male
Connector
Bottom
Accessories
Item
Model
Description
Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 16°
Weight Units per antenna
2.1 kg
1 (Separate packing)
y2
y4
f
p1 p1 p1
RET S/N:
y1
HWMxxx……LBy1
r - Red
L - Left array
HWMxxx……LTy2
L
HWMxxx………..r1
r1
y - Yellow
b - Blue
R - Right array T - Top array
CL CR
p1
y3
p - Purple
B –ttom array
R
d HWMxxx……RTy4
HWMxxx……RBy3
HWMxxx……….p1
RAE s/N:
f HWXxxx……..p1
MQ5-4
p1.L+
MQ5-3
p1.CL+
MQ5-2
p1.CR+
MQ5-1
p1.R+
MQ4-4
p1.L-
MQ4-3
p1.CL-
MQ4-2
p1.CR-
MQ4-1
p1.R-
Physical array & port mapping according to AISG naming convention:
Left - Center Left - Center Right - Right (seen from front of antenna)
313
Product
List
Product
Category
A094519R3v06
D09X-690-960/4x(1695-2690)/4x(3300-3800)-6x65-14.5i/15.5i/
15.5i/15.5i/15.5i/19i-6xM-R EasyRET 18-port 1L4H FDD/3.3-3.8GHz
8T8R TDD Antenna with 6 Integrated RCUs
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
< 1 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Power consumption (W)
Adjustment time (full range) (s)
Typ. 40
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Lightning protection (kA)
10 (8/20 μs)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety),ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE,FCC,IC,RCM, RoHS, REACH, WEEE
314
Product
List
Product
Category
A094519R3v06
A094519R3v06
D09X-690-960/4x(1695-2690)/4x(3300-3800)-6x65-14.5i/15.5i/
15.5i/15.5i/15.5i/19i-6xM-R EasyRET 18-port 1L4H FDD/3.3-3.8GHz
8T8R TDD Antenna with 6 Integrated RCUs
Pattern sample for reference
690 - 960 MHz
1695 - 2690
MHz
Single column
(3300 - 3800 MHz)
Service 0°
(3300 - 3800 MHz)
5G NR Broadcast
(3300 - 3800 MHz)
315
Product
List
Product
Category
ASI451000v06
D06X-2x690-960/2x1695-2690/2x2300-3800-6x652x8.5i/2x11i/2x11i-3F
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Br1/Tr2)
Frequency range (MHz)
690 - 803
Polarization
Electrical downtilt (°)
Gain (dBi)
790 - 862
824 - 894
2 x (1695 - 2690) (Ly1/Ry2)
1695 1990
880 - 960
1920 2200
2200 2490
+45° , -45°
+45° , -45°
0, fixed
3, fixed
2490 2690
7.5 ± 0.5
8.0 ± 0.5
8.2 ± 0.5
8.5 ± 0.5 11.0 ± 0.5 11.5 ± 0.5 11.5 ± 0.5 11.6 ± 0.5
Horizontal 3dB beam width (°)
67 ± 4
64 ± 5
62 ± 5
60 ± 5
66 ± 7
61 ± 6
63 ± 5
67 ± 5
Vertical 3dB beam width (°)
84 ± 8
77 ± 8
75 ± 8
74 ± 7
40 ± 4
36 ± 4
28 ± 4
24 ± 4
VSWR
< 1.8
< 1.5
Cross polar isolation (dB)
≥ 22
≥ 22
Interband isolation (dB)
≥ 23
≥ 23
Front to back ratio , ±30° (dB)
> 19
> 19
> 20
> 19
> 20
> 20
> 21
>20
Cross polar ratio (dB)
> 18
> 18
> 17
> 18
> 18
>17
>17
>17
0°
Max. effective power per port
(W)
Intermodulation IM3 (dBc)
Impedance (Ω)
Grounding
160 (at 50℃ ambient
temperature)*
120 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -150 (2 x 43 dBm carrier)
50
50
DC Ground
DC Ground
Electrical Properties
2 x (2300 - 3800) (Lp1/Rp2)
Frequency range (MHz)
2300 - 2690
3300 - 3800
Polarization
+45° , -45°
Electrical downtilt (°)
3, fixed
Gain (dBi)
10.6 ± 0.5
11.5 ± 0.5
Horizontal 3dB beam width (°)
61 ± 5
57 ± 6
Vertical 3dB beam width (°)
39 ± 4
23 ± 4
VSWR
< 1.5
Cross polar isolation (dB)
≥ 22
≥ 22
Interband isolation (dB)
≥ 23
≥ 23
Front to back ratio , ±30° (dB)
> 20
> 20
Cross polar ratio (dB)
> 15
> 15
0°
Max. effective power per port
(W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 500 W (at 50℃ ambient temperature)
316
Product
List
Product
Category
ASI451000v06
D06X-2x690-960/2x1695-2690/2x2300-3800-6x652x8.5i/2x11i/2x11i-3F
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
485 x 369 x 149
Packing dimensions (H x W x D) (mm)
750 x 470 x 265
Antenna weight (kg)
7.8
Clamps weight (kg)
3.3 (2 units)
Antenna packing weight (kg)
14.2 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal:
130 (at 150 km/h)
Lateral:
40 (at 150 km/h)
Maximum: 155 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
68
12 x 4.3-10 Female
Connector position
Bottom
Description
Downtilt kit ASMDT0B01 Mechanical downtilt: 0 - 20°
Weight
Units per antenna
1.3 kg
1 (Separate packing)
Unit: mm
y1
p1
317
r2
r1
520
Model
23
Item
485
Accessories
y2
p2
Product
List
Product
Category
ASI451000v06
D06X-2x690-960/2x1695-2690/2x2300-3800-6x652x8.5i/2x11i/2x11i-3F
Pattern sample for reference
1695 - 2690 MHz
(Ly1/Ry2)
690 - 960 MHz
(Br1/Tr2)
2300 - 3800 MHz
(Lp1/Rp2)
318
Product
List
Product
Category
ASI4518R54v06
D06X-2x(690-894)/4x(2300-2690)-3x65-16i/16i/18i-3xM-R
EasyRET 12-port 2L FDD/2.3-2.69GHz TDD 8T8R Antenna with 3
Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 894) (Lr1/Rr2)
Frequency range (MHz)
690 - 824
824 - 894
Polarization
+45° , -45°
2 - 12 , continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
Vertical side lobe suppression
above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.0
15.7
> 16
> 16
68 ±6
67 ±7
10.5 ±0.7
9.5 ±0.8
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 25
Cross polar ratio (dB)
> 16
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
General Electrical Properties
Frequency range (MHz)
2300 - 2690 (y1)
Polarization
+45° , -45°
2 - 12, continuously adjustable
Electrical downtilt (°)
General
paramete
rs
Electrical downtilt tolerance (°)
±1
Max. effective power per port (W)
40 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
Calibratio
n and
electrical
paramete
rs
DC Ground
Coupling factor between calibration
port and each antenna port (dB)
-26 ±2
Max. amplitude tolerance from
calibration port to input ports (dB)
0.7
Max. phase tolerance from calibration port
to input ports (°)
5
Ports VSWR
1.5
Co-polarization isolation between ports (dB)
≥ 20 @ 2°- 6°Electrical downtilt ; ≥ 25 @ 7°- 12°Electrical downtilt
Cross-polarization isolation between ports
(dB)
≥ 23 @ 2°- 6°Electrical downtilt ; ≥ 25 @ 7°- 12°Electrical downtilt
* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)
319
Product
List
Product
Category
ASI4518R54v06
D06X-2x(690-894)/4x(2300-2690)-3x65-16i/16i/18i-3xM-R
EasyRET 12-port 2L FDD/2.3-2.69GHz TDD 8T8R Antenna with 3
Integrated RCUs - 2.0m
TDD LTE Electrical Properties
2300 - 2690 (y1)
Frequency range (MHz)
Gain (dBi)
Radiation
parameters
Service
beam
Soft split
multi-beam
16.0
85
70
≥ 25
≥ 25
Cross polar ratio (0°) (dB)
≥ 26
≥ 20
6.0
5.5
Side lobe suppression for first side lobe
above main beam (dB)
≥ 15
≥ 15
Gain (dBi)
17.3
17.6
Vertical 3dB beam width (0°)
60
59
Front to back ratio (dB)
≥ 28
≥ 30
Cross polar ratio (0°) (dB)
≥ 16
≥ 21
Horizontal 3dB beam width (0°)
65°
Broadcast
beam
2496 - 2690
15.5
Front to back ratio (dB)
Horizontal 3dB beam width (°)
Single
column
beam
2300 - 2400
6.0
5.5
Side lobe suppression for first side lobe
above main beam (dB)
≥ 15
≥ 15
0°direct beam gain (dBi)
20.8
21
0°direction beam horizontal 3dB beam
width (0°)
26
25
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (0°)
(dB)
≥ 20
≥ 20
Gain (dBi)
20.3
19.9
29
28
Vertical 3dB beam width (0°)
Horizontal 3dB beam width (°)
Front to back ratio (dB)
≥ 28
≥ 28
Cross polar ratio at boresight (dB)
≥ 18
≥ 18
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
320
Product
List
Product
Category
ASI4518R54v06
D06X-2x(690-894)/4x(2300-2690)-3x65-16i/16i/18i-3xM-R
EasyRET 12-port 2L FDD/2.3-2.69GHz TDD 8T8R Antenna with 3
Integrated RCUs - 2.0m
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2009 x 499 x 206
Packing dimensions (H x W x D) (mm)
2360 x 550 x 245
37.0
Clamps weight (kg)
(530)
Antenna weight (kg)
68
6.3 (2 units)
Antenna packing weight (kg)
52 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1420
2009
Mast diameter supported (mm)
-40 .. +65
Frontal:
730 (at 150 km/h)
Lateral:
380 (at 150 km/h)
Maximum: 955 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
13 x 4.3-10 Female
Connector position
59
Connector
Bottom
Accessories
Item
Downtilt kit
Model
Description
ASMDT0H01 Mechanical downtilt: 0 - 12 °
Weight Units per antenna
3.1 kg
1 (Separate packing)
RET S/N:
HWMxxx……Lr1
HWMxxx…….y1
HWMxxx…...Rr2
RAE S/N:
HWXxxx……y1
r - Red
L - Left array
321
y - Yellow
R - Right array
Product
List
Product
Category
ASI4518R54v06
D06X-2x(690-894)/4x(2300-2690)-3x65-16i/16i/18i-3xM-R
EasyRET 12-port 2L FDD/2.3-2.69GHz TDD 8T8R Antenna with 3
Integrated RCUs - 2.0m
Pattern sample for reference
690 - 894 MHz
TDD Single column
TDD 65° Broadcast
TDD Service 0°
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 1.5 (when the motor does not work, 12 V)
< 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
322
Product
List
Product
Category
AOC4521R01v06
D08X-2x690-960/2x1695-2690/4x2300-3800-5x65-2x15.5i/2x17.5i/
21i-5xM-R EasyRET 16-port 2L2H FDD/2.3-3.8GHz 8T8R TDD
Antenna with Integrated RCUs - 2.0m
Preliminary Issue
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
Polarization
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
880 - 960
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
14.7 ±0.5
15.0 ±0.5
15.2 ±0.5
15.4 ±0.5
> 15
> 15
> 15
> 15
67 ±6
66 ±6
65 ±6
63 ±6
10.5 ±0.8
9.5 ±0.9
9.1 ±0.5
8.6 ±0.6
VSWR
< 1.5
Cross polar isolation (dB)
≥ 26
Interband isolation (dB)
≥ 25 (690 - 960 // 690 - 960); ≥ 28 (690 - 960 // Others)
Front to back ratio , ±30° (dB)
> 21
> 22
> 22
> 22
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2200 - 2300
2300 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.8 ±0.6
17.2 ±0.6
17.3 ±0.6
17.4 ±0.5
> 16
> 16
> 16
> 17
63 ±7
63 ±6
62 ±5
60 ±6
7.5 ±0.7
6.7 ±0.6
5.9 ±0.4
5.3 ±0.3
VSWR
< 1.5
Cross polar isolation (dB)
≥ 26
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
323
Product
List
Product
Category
AOC4521R01v06
D08X-2x690-960/2x1695-2690/4x2300-3800-5x65-2x15.5i/2x17.5i/
21i-5xM-R EasyRET 16-port 2L2H FDD/2.3-3.8GHz 8T8R TDD
Antenna with Integrated RCUs - 2.0m
General Electrical Properties
2300 - 3800
Frequency range (MHz)
2300 - 2690
Polarization
General
parameter
s
2 - 12, continuously adjustable
Electrical downtilt (°)
Electrical downtilt tolerance (°)
±1
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
Calibratio
n and
electrical
parameter
s
3300 - 3800
+45° , -45°
DC Ground
Coupling factor between calibration
port and each antenna port (dB)
-26 ±2
-26 ±2
Max. amplitude tolerance from
calibration port to input ports (dB)
0.7
0.9
6
8
Ports VSWR
1.5
1.5
Co-polarization isolation between ports
(dB)
≥ 20
≥ 20
Cross-polarization isolation between ports
(dB)
≥ 23
≥ 23
Max. phase tolerance from calibration
port to input ports (°)
* Max. effective power whole antenna : 1000 W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
2300 - 3800
Frequency range (MHz)
Gain (dBi)
Radiation
parameters
65°
Broadcast
beam
Service
beam
Soft split
multi-beam
3300 - 3800
15.0
15.7
90
70
Front to back ratio (dB)
≥ 25
≥ 25
Cross polar ratio (0°) (dB)
≥ 16
≥ 15
7.7
5.6
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
Gain (dBi)
16.0
16.8
Horizontal 3dB beam width (°)
Single
column
beam
2300 - 2690
Vertical 3dB beam width (°)
65
65
Front to back ratio (dB)
≥ 26
≥ 25
Horizontal 3dB beam width (°)
Cross polar ratio (0°) (dB)
≥ 17
≥ 16
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
0°direct beam gain (dBi)
20.0
21.1
0°direction beam horizontal 3dB beam width (°)
26
18
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (dB)
≥ 18
≥ 18
Gain (dBi)
19.0
/
31
/
Front to back ratio (dB)
≥ 30
/
Cross ploar ratio at boresight (dB)
≥ 19
/
Horizontal 3dB beam width (°)
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
324
Product
List
Product
Category
AOC4521R01v06
D08X-2x690-960/2x1695-2690/4x2300-3800-5x65-2x15.5i/2x17.5i/
21i-5xM-R EasyRET 16-port 2L2H FDD/2.3-3.8GHz 8T8R TDD
Antenna with Integrated RCUs - 2.0m
5G NR Electrical Properties
2300 - 3800
Frequency range (MHz)
Gain (dBi)
NR Broadcast
beam
(PBCH/PSCH/SSCH
with HUAWEI
gNodeB)
NR Service beam
15.7
90
70
≥ 25
≥ 25
Cross polar ratio (0°) (dB)
≥ 16
≥ 15
7.7
5.6
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
Gain (dBi)
19.7
20.8
Vertical 3dB beam width (°)
Radiation
parameters
3300 - 3800
15.0
Front to back ratio (dB)
Horizontal 3dB beam width (°)
Single column
beam
2300 - 2690
65
65
Front to back ratio (dB)
≥ 26
≥ 30
Side lobe suppression for first side lobe above main
beam (dB)
≥ 16
≥ 15
0°direct beam gain (dBi)
20.0
21.1
Horizontal 3dB beam width (°)
26
18
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (0°) (dB)
≥ 18
≥ 18
0°direction beam horizontal 3dB beam width (°)
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
Mechanical Properties
Distance between TDD columns (mm)
59
Antenna dimensions (H x W x D) (mm)
2099 x 449 x 196
Packing dimensions (H x W x D) (mm)
2360 x 535 x 240
Antenna weight (kg)
Clamps weight (kg)
Antenna packing weight (kg)
35.5
4.2 (2 units)
45.6 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal:
615 (at 150 km/h)
Lateral:
375 (at 150 km/h)
Maximum: 810 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
Connector
250
8 x 4.3-10 Female
1 x MQ4 Male + 1 x MQ5 Male
Connector position
Bottom
*GFRPP: Glass Fiber Reinforced Polypropylene
325
Product
List
Product
Category
A094521R4v06
D09X-2x(690-960)/2x(1427-2690)/1695-2690/4x(3300-3800)-6x6514.5i/14.5i/17.5i/17.5i/17.5i/21i-6xM-R EasyRET 18-port 2L3H FDD/
3.3-3.8GHz 8T8R TDD Antenna with 6 Integrated RCUs - 1.5m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
Polarization
0 - 14 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
880 - 960
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
13.5
13.8
14.0
14.1
13.5 ±0.5
13.7 ±0.5
13.9 ±0.5
14.0 ±0.5
> 15
> 15
> 15
> 15
69 ±7
68 ±6
68 ±6
67 ±6
14.9 ±1.4
13.5 ±1.3
12.8 ±1.2
12.0 ±1.2
> 21
> 22
> 22
> 18
> 18
> 18
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 20
Cross polar ratio (dB)
> 17
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1427 - 2690) (Ly1/Ry3)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
2200 - 2490
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.6
16.7
17.0
17.3
17.5
15.4 ±0.6
16.6 ±0.5
16.9 ±0.5
17.2 ±0.5
17.4 ±0.5
> 15
> 16
> 16
> 16
> 16
70 ±7
62 ±6
60 ±6
60 ±6
58 ±5
9.1 ±0.8
7.3 ±0.7
6.6 ±0.6
5.6 ±0.5
5.3 ±0.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 23
> 26
> 25
> 26
> 24
Cross polar ratio (dB)
> 17
> 18
> 18
> 18
> 17
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
326
Product
List
Product
Category
A094521R4v06
D09X-2x(690-960)/2x(1427-2690)/1695-2690/4x(3300-3800)-6x6514.5i/14.5i/17.5i/17.5i/17.5i/21i-6xM-R EasyRET 18-port 2L3H FDD/
3.3-3.8GHz 8T8R TDD Antenna with 6 Integrated RCUs - 1.5m
Electrical Properties
1695 - 2690 (Cy2)
Frequency range (MHz)
1695 - 1990
1920 - 2200
2200 - 2490
Polarization
2 - 12 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
2490 - 2690
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.6
17.0
17.1
17.4
16.5 ±0.5
16.9 ±0.5
17.0 ±0.6
17.3 ±0.6
> 15
> 16
> 16
> 15
66 ±6
61 ±6
60 ±6
60 ±6
7.2 ±0.6
6.5 ±0.6
5.7 ±0.5
5.2 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 26
> 26
> 26
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available
General Electrical Properties
Frequency (MHz)
3300 - 3800 (p1)
Polarization
+45° , -45°
Electrical downtilt (°)
General parameters
2 - 12, continuously adjustable
Electrical downtilt tolerance (°)
±1
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each antenna port
(dB)
-26 ±2
Max. amplitude tolerance from calibration port to input ports (dB)
0.9
Calibration and
Max. phase tolerance from calibration port to input ports (°)
electrical parameters
Ports VSWR
7
1.5
Co-polarization isolation between ports (dB)
≥ 20
Cross-polarization isolation between ports (dB)
≥ 23
* Max. effective power whole antenna: 800 W (at 50℃ ambient temperature)
327
Product
List
Product
Category
A094521R4v06
D09X-2x(690-960)/2x(1427-2690)/1695-2690/4x(3300-3800)-6x6514.5i/14.5i/17.5i/17.5i/17.5i/21i-6xM-R EasyRET 18-port 2L3H FDD/
3.3-3.8GHz 8T8R TDD Antenna with 6 Integrated RCUs - 1.5m
TDD LTE Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
Gain (dBi)
15.6
70
Horizontal 3dB beam width (°)
Single column
beam
Front to back ratio (dB)
≥ 24
Cross polar ratio (0°) (dB)
≥ 15
5.5
Vertical 3dB beam width (°)
Radiation
parameters
Side lobe suppression for first side lobe above main beam (dB)
≥ 15
Gain (dBi)
16.9
65
Horizontal 3dB beam width (°)
65° Broadcast
beam
Front to back ratio (dB)
≥ 25
Cross polar ratio (0°) (dB)
≥ 15
5.5
Vertical 3dB beam width (°)
Service beam
Side lobe suppression for first side lobe above main beam (dB)
≥ 15
0°direct beam gain (dBi)
20.7
21
0°direction beam horizontal 3dB beam width (°)
0°direction beam front to back ratio (dB)
≥ 30
0°direction beam cross polar ratio (dB)
≥ 19
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
5G NR Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
Gain (dBi)
15.6
70
Horizontal 3dB beam width (°)
Single column beam
Front to back ratio (dB)
≥ 24
Cross polar ratio (0°) (dB)
≥ 15
5.5
Vertical 3dB beam width (°)
Radiation
parameters
Side lobe suppression for first side lobe above main beam
(dB)
≥ 15
Gain (dBi)
20.7
65
Horizontal 3dB beam width (°)
NR Broadcast beam
NR Service beam
≥ 25
Front to back ratio (dB)
Vertical 3dB beam width (°)
5.5
Side lobe suppression for first side lobe above main beam
(dB)
≥ 15
0°direct beam gain (dBi)
20.7
21
0°direction beam horizontal 3dB beam width (°)
0°direction beam front to back ratio (dB)
30
0°direction beam cross polar ratio (0°) (dB)
19
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
328
Product
List
Product
Category
A094521R4v06
D09X-2x(690-960)/2x(1427-2690)/1695-2690/4x(3300-3800)-6x6514.5i/14.5i/17.5i/17.5i/17.5i/21i-6xM-R EasyRET 18-port 2L3H FDD/
3.3-3.8GHz 8T8R TDD Antenna with 6 Integrated RCUs - 1.5m
Mechanical Properties
1509 x 499 x 206
Packing dimensions (H x W x D)
(mm)
1770 x 555 x 245
Antenna weight (kg)
36.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
68
47.5 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
Lateral:
Maximum:
Wind load (N)
1365
1509
50 - 115
540 (at 150 km/h)
270 (at 150 km/h)
705 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
59
Mast diameter supported (mm)
10 x 4.3-10 Female
1 x MQ4 Male + 1 x MQ5 Male
Connector
Connector position
Bottom
Accessories
Item
(85)
Antenna dimensions (H x W x D)
(mm)
y2
Model
Description
Weight Units per antenna
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 16 ° 3.1 kg
1 (Separate packing)
p1 p1 p1 p1
y1
r1
y3
r2
RET S/N:
HWMxxx……Lr1
r - Red
L - Left array
y - Yellow
R - Right array
HWMxxx……Ly1
p - Purple
C - Center array
HWMxxx……Cy2
d
HWMxxx……Ry3
HWMxxx……Rr2
HWMxxx……..p1
MQ5-4
p1.1+
MQ5-3
p1.2+
MQ5-2
p1.3+
MQ5-1
p1.4+
MQ4-4
p1.1-
MQ4-3
p1.2-
MQ4-2
p1.3-
MQ4-1
p1.4-
RAE S/N:
HWXxxx……..p1
Notes:
Before installing the antenna, it is recommended to plan the use of antenna connectors based on frequency bands in use
currently and in the future. This is to avoid adjusting antenna connector configuration when new frequency bands are deployed.
329
Product
List
Product
Category
A094521R4v06
D09X-2x(690-960)/2x(1427-2690)/1695-2690/4x(3300-3800)-6x6514.5i/14.5i/17.5i/17.5i/17.5i/21i-6xM-R EasyRET 18-port 2L3H FDD/
3.3-3.8GHz 8T8R TDD Antenna with 6 Integrated RCUs - 1.5m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 1 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
TDD LTE EasyBeam Properties
Frequency range (MHz)
3300 - 3800
2 - 12
Electrical downtilt (°)
Broadcast
beam
30
Horizontal 3dB beam width (°)
Electrical azimuth (°)
Electrical azimuth step(°)
65
90
-15..+15
0
1
/
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Pattern sample for reference
690 - 960 MHz
(Lr1 / Rr2)
1427 - 2690 MHz
(Ly1/Ry3)
330
1695 - 2690 MHz
(Cy2)
Product
List
Product
Category
A094521R4v06
D09X-2x(690-960)/2x(1427-2690)/1695-2690/4x(3300-3800)-6x6514.5i/14.5i/17.5i/17.5i/17.5i/21i-6xM-R EasyRET 18-port 2L3H FDD/
3.3-3.8GHz 8T8R TDD Antenna with 6 Integrated RCUs - 1.5m
Single column
(3300 - 3800 MHz)
65° Broadcast
(3300 - 3800 MHz)
5G NR Broadcast
(3300 - 3800 MHz)
Service 0°
(3300 - 3800 MHz)
331
Product
List
Product
Category
ASI4518R42v06
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/2300-3800
-6x65-15.5i/15.5i/17.5i/17.5i/17.5i/17i-M/M/M/M/M/M-R EasyRET 2L3H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 6 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
880 - 960
+45° , -45°
0 - 10 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
824 - 894
at mid Tilt
over all Tilts
14.8
15.1
15.3
15.6
14.7 ±0.5
15.0 ±0.5
15.2 ±0.5
15.5 ±0.5
> 16
> 16
> 16
> 16
64 ±6
62 ±5
60 ±5
60 ±6
11.0 ±0.7
9.9 ±0.7
9.4 ±0.6
8.9 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 21
> 22
> 23
> 23
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1427 - 2690) (Ly1/Ry3)
Frequency range (MHz)
1427 - 15181695 - 19901920 - 22002200 - 24902490 - 26901695 - 19901920 - 22002200 - 24902490 - 2690
Polarization
Electrical downtilt (°)
Gain (dBi)
1695 - 2690 (Cy2)
at mid Tilt
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable, each band separately
2 - 12 , continuously adjustable
15.9
17.1
17.3
17.3
17.5
17.2
17.4
17.4
17.6
over all Tilts 15.8 ±0.5 17.0 ±0.6 17.2 ±0.7 17.2 ±0.7 17.4 ±0.6 17.1 ±0.6 17.3 ±0.7 17.3 ±0.7 17.4 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
> 16
> 16
> 16
> 16
> 16
> 16
> 16
> 17
> 17
70 ±6
68 ±5
67 ±5
65 ±6
58 ±6
62 ±4
64 ±4
62 ±4
60 ±6
8.9 ±0.5
7.2 ±0.6
6.5 ±0.6
5.6 ±0.5
5.4 ±0.6
7.1 ±0.5
6.3 ±0.5
5.6 ±0.5
5.4 ±0.6
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 25
> 26
> 26
> 26
> 25
> 26
> 26
> 26
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
≥ 28
≥ 28
250 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -150 (2 x 43 dBm carrier)
50
50
DC Ground
DC Ground
Impedance (Ω)
Grounding
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
332
Product
List
Product
Category
ASI4518R42v06
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/2300-3800
-6x65-15.5i/15.5i/17.5i/17.5i/17.5i/17i-M/M/M/M/M/M-R EasyRET 2L3H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 6 Integrated RCUs - 2.0m
General Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
2300 - 2690
Polarization
General
parameters
+45° , -45°
2 - 12, continuously adjustable
Electrical downtilt (°)
Electrical downtilt tolerance (°)
±1
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each
antenna port (dB)
Calibration
and
electrical
parameters
3300 - 3800
Max. amplitude tolerance from calibration port to input
ports (dB)
Max. phase tolerance from calibration port to input ports (°)
-26 ±2
-26 ±2
0.7
0.9
6
8
Ports VSWR
1.5
1.5
Co-polarization isolation between ports (dB)
≥ 20
≥ 20
Cross-polarization isolation between ports (dB)
≥ 23
≥ 23
* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
Gain (dBi)
65°
Broadcast
beam
Service
beam
Soft split
multi-beam
15.7
70
Front to back ratio (dB)
≥ 25
≥ 25
Cross polar ratio (0°) (dB)
≥ 16
≥ 15
8.0
5.5
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
Gain (dBi)
16.0
17.1
Vertical 3dB beam width (°)
65
65
Front to back ratio (dB)
≥ 26
≥ 25
Cross polar ratio (0°) (dB)
≥ 17
≥ 16
8.0
5.5
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
0°direct beam gain (dBi)
20.0
21.1
Horizontal 3dB beam width (°)
Radiation
parameters
3300 - 3800
15.0
90
Horizontal 3dB beam width (°)
Single
column
beam
2300 - 2690
Vertical 3dB beam width (°)
26
20
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (dB)
≥ 19
≥ 18
Gain (dBi)
19
/
Horizontal 3dB beam width (°)
32
/
Front to back ratio (dB)
≥ 30
/
Cross polar ratio at boresight (dB)
≥ 18
/
0°direction beam horizontal 3dB beam width (°)
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
333
Product
List
Product
Category
ASI4518R42v06
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/2300-3800
-6x65-15.5i/15.5i/17.5i/17.5i/17.5i/17i-M/M/M/M/M/M-R EasyRET 2L3H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 6 Integrated RCUs - 2.0m
5G NR Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
Gain (dBi)
90
70
≥ 25
Cross polar ratio (0°) (dB)
≥ 16
≥ 15
8.0
5.5
Side lobe suppression for first side lobe
above main beam (dB)
≥ 15
≥ 15
Gain (dBi)
19.7
20.8
65
65
≥ 26
≥ 25
8.0
5.5
Side lobe suppression for first side lobe
above main beam (dB)
≥ 15
≥ 15
0°direct beam gain (dBi)
20.0
21.1
26
20
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (0°) (dB)
≥ 19
≥ 18
Horizontal 3dB beam width (°)
NR Broadcast
beam
Front to back ratio (dB)
Vertical 3dB beam width (°)
NR Service beam
15.7
≥ 25
Vertical 3dB beam width (°)
Radiation
parameters
3300 - 3800
15.0
Front to back ratio (dB)
Horizontal 3dB beam width (°)
Single column
beam
2300 - 2690
0°direction beam horizontal 3dB beam width
(°)
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
Mechanical Properties
Distance between TDD columns (mm)
59
Antenna dimensions (H x W x D) (mm)
2099 x 449 x 196
Packing dimensions (H x W x D) (mm)
2360 x 535 x 240
Antenna weight (kg)
41.7
Clamps weight (kg)
6.3 (2 units)
Operational temperature (℃)
Wind load (N)
GFRPP*
Light grey
-40 .. +65
Frontal:
615 (at 150 km/h)
Lateral:
375 (at 150 km/h)
Maximum: 810 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
Connector position
2099
Radome colour
50 - 115
1405
Radome material
54.1 (Included clamps)
10 x 4.3-10 Female
1 x MQ4 Male + 1 x MQ5 Male
Bottom
59
Antenna packing weight (kg)
Mast diameter supported (mm)
(635)
68
*GFRPP: Glass Fiber Reinforced Polypropylene
334
Product
List
Product
Category
ASI4518R42v06
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/2300-3800
-6x65-15.5i/15.5i/17.5i/17.5i/17.5i/17i-M/M/M/M/M/M-R EasyRET 2L3H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 6 Integrated RCUs - 2.0m
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 12 °
3.1 kg
1 (Separate packing)
d
Integrated RET S/N:
HWMxxx……Lr1
HWMxxx……Ly1
f
HWMxxx……Cy2
d HWMxxx……Ry3
HWMxxx……Rr2
HWMxxx……p1
r - Red
L - Left array
y - Yellow
R - Right array
p - Purple
C - Center array
RAE S/N:
HWXxxx……..p1
L CL CR R
y1
MQ5-4
p1.L+
MQ5-3
p1.CL+
MQ5-2
p1.CR+
MQ5-1
p1.R+
MQ4-4
p1.L-
MQ4-3
p1.CL-
MQ4-2
p1.CR-
MQ4-1
P1.R-
y2
y3
p1 p1 p1 p1
r1
r2
Physical array & port mapping according to AISG naming convention:
Left - Center Left - Center Right - Right (seen from front of antenna)
335
Product
List
Product
Category
ASI4518R42v06
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/2300-3800
-6x65-15.5i/15.5i/17.5i/17.5i/17.5i/17i-M/M/M/M/M/M-R EasyRET 2L3H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 6 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
< 1.5 (when the motor does not work, 12 V)
< 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Power consumption (W)
Adjustment time (full range) (s)
Typ. 40
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
TDD LTE EasyBeam Properties
Frequency range (MHz)
2300 - 2690
3300 - 3800
2 - 12
2 - 12
Electrical downtilt (°)
Horizontal 3dB beam width
(°)
Broadcas
t beam Electrical azimuth (°)
Electrical azimuth step(°)
30
65
90
30
65
90
-15..+15
0
-15..+15
0
1
/
1
/
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
336
Product
List
Product
Category
ASI4518R42v06
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/2300-3800
-6x65-15.5i/15.5i/17.5i/17.5i/17.5i/17i-M/M/M/M/M/M-R EasyRET 2L3H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 6 Integrated RCUs - 2.0m
Pattern sample for reference
690 - 960 MHz
(Lr1)
690 - 960 MHz
(Rr2)
1695 - 2690 MHz
(Cy2)
1427 - 2690 MHz
(Ry3)
1427 - 2690 MHz
(Ly1)
337
Product
List
Product
Category
ASI4518R42v06
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/2300-3800
-6x65-15.5i/15.5i/17.5i/17.5i/17.5i/17i-M/M/M/M/M/M-R EasyRET 2L3H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 6 Integrated RCUs - 2.0m
Single column
(2300 - 3800 MHz)
65° Broadcast
(2300 - 3800 MHz)
Service 0°
(2300 - 3800 MHz)
5G NR Broadcast
(2300 - 3800 MHz)
Multi-Beam-30°
(2300 - 2690 MHz)
Multi-Beam+30°
(2300 - 2690 MHz)
338
Product
List
Product
Category
A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x652x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
1695 1990
690 - 803 790 - 862 824 - 894 880 - 960
Polarization
Electrical downtilt (°)
Gain (dBi)
2 x (1695 - 2690) (Ly1/Ry4)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
1920 2200
2200 2490
2490 2690
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable, each band
separately
2 - 12 , continuously adjustable, each band
separately
15.0
15.2
15.4
15.5
16.8
17.4
17.8
18.3
14.9±0.5
15.1±0.5
15.3±0.5
15.4±0.5
16.7 ±0.7
17.3 ±0.5
17.7 ±0.5
18.2 ±0.5
> 16
> 16
> 16
> 16
> 16
> 16
> 16
> 16
70 ±6
69 ±6
66 ±6
63 ±6
66 ±6
64 ±6
62 ±5
58 ±6
8.8 ±0.5
7.7 ±0.8
6.8 ±0.7
6.2 ±0.5
5.4 ±0.5
10.8 ±0.8 10.0 ±0.6 9.5 ±0.6
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 26
≥ 26
Interband isolation (dB)
≥ 26
≥ 26
Front to back ratio , ±30° (dB)
> 21
> 22
> 22
> 22
> 25
> 25
> 26
> 26
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 17
> 17
> 18
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
50
50
DC Ground
DC Ground
Electrical Properties
2 x (1427 - 2690) (CLy2/CRy3)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.3
16.8
17.4
17.9
18.5
15.2 ±0.7
16.7 ±0.7
17.3 ±0.5
17.8 ±0.5
18.4 ±0.5
> 15
> 16
> 15
> 16
> 16
72 ±8
68 ±6
66 ±6
61 ±5
58 ±7
9.3 ±0.7
7.6 ±0.7
6.8 ±0.6
6.2 ±0.5
5.4 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 26
< 1.5
≥ 26
Interband isolation (dB)
≥ 26
≥ 26
Front to back ratio , ±30° (dB)
> 25
> 26
> 26
> 26
> 26
Cross polar ratio (dB)
> 16
> 18
> 18
> 18
> 18
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
339
Product
List
Product
Category
A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x652x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.0m
General Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
2300 - 2690
Polarization
General
parameters
+45° , -45°
2 - 12, continuously adjustable, each band
separately
Electrical downtilt (°)
Electrical downtilt tolerance (°)
±1
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each
antenna port (dB)
Calibration
and electrical
parameters
3300 - 3800
Max. amplitude tolerance from calibration port to input
ports (dB)
Max. phase tolerance from calibration port to input ports (°)
-26 ±2
-26 ±2
0.7
0.9
6
8
Ports VSWR
1.5
1.5
Co-polarization isolation between ports (dB)
≥ 20
≥ 20
Cross-polarization isolation between ports (dB)
≥ 23
≥ 23
* Max. effective power whole antenna: 1800 W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
Gain (dBi)
Radiation
parameters
Service
beam
Soft split
multi-beam
16.8
70
Front to back ratio (dB)
≥ 25
≥ 25
Cross polar ratio (0°) (dB)
≥ 15
≥ 15
8.0
5.6
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
Gain (dBi)
16.2
17.0
Vertical 3dB beam width (°)
65
63
Front to back ratio (dB)
≥ 26
≥ 25
Cross polar ratio (0°) (dB)
≥ 17
≥ 16
8.0
5.6
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
0°direct beam gain (dBi)
20.2
22.0
Horizontal 3dB beam width (°)
65°
Broadcast
beam
3300 - 3800
15.0
90
Horizontal 3dB beam width (°)
Single
column
beam
2300 - 2690
Vertical 3dB beam width (°)
26
18
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (dB)
≥ 18
≥ 18
Gain (dBi)
19.4
/
0°direction beam horizontal 3dB beam width (°)
31
/
Front to back ratio (dB)
≥ 30
/
Cross ploar ratio at boresight (dB)
≥ 19
/
Horizontal 3dB beam width (°)
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
340
Product
List
Product
Category
A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x652x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.0m
5G NR Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
Gain (dBi)
70
≥ 25
Cross polar ratio (0°) (dB)
≥ 15
≥ 15
8.0
5.6
Side lobe suppression for first side lobe above main
beam (dB)
≥ 15
≥ 15
Gain (dBi)
19.9
21.7
Front to back ratio (dB)
65
65
≥ 26
≥ 30
8.0
5.6
Side lobe suppression for first side lobe above main
beam (dB)
≥ 16
≥ 15
0°direct beam gain (dBi)
20.2
22.0
Vertical 3dB beam width (°)
26
18
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (0°) (dB)
≥ 18
≥ 18
0°direction beam horizontal 3dB beam width (°)
NR Service beam
16.8
≥ 25
Horizontal 3dB beam width (°)
NR Broadcast
beam
15.0
Front to back ratio (dB)
Vertical 3dB beam width (°)
Radiation
parameters
3300 - 3800
90
Horizontal 3dB beam width (°)
Single column
beam
2300 - 2690
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
68
2099 x 469 x 206
Packing dimensions (H x W x D) (mm)
2365 x 555 x 255
Antenna weight (kg)
41.2
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(605)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
57.6 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
1435
Frontal:
630 (at 150 km/h)
Lateral:
390 (at 150 km/h)
Maximum: 835 (at 150 km/h)
2099
Operational temperature (℃)
12 x 4.3-10 Female
1 x MQ4 Male + 1 x MQ5 Male
Connector
Connector position
Bottom
59
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Model
Description
Weight Units per antenna
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 12 ° 3.1 kg
1 (Separate packing)
341
Product
List
Product
Category
A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x652x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.0m
c
b
d
e
RET S/N:
a HWMxxxx……Lr1
b HWMxxxx……Ly1
g
c HWMxxxx….CLy2
d HWMxxxx….CRy3
a
e HWMxxxx……Ry4
f
r - Red
L - Left array
y - Yellow
R - Right array
f HWMxxxx……Rr2
g HWMxxxx……..p1
p - Purple
C - Center array
RAE S/N:
g HWXxxxx……..p1
L CL CR R
y1
y2
y3
y4
p1 p1 p1 p1
r1
r2
MQ5-4
p1.L+
MQ5-3
p1.CL+
MQ5-2
p1.CR+
MQ5-1
p1.R+
MQ4-4
p1.L-
MQ4-3
p1.CL-
MQ4-2
p1.CR-
MQ4-1
p1.R-
Physical array & port mapping according to AISG naming convention:
Left - Center Left - Center Right - Right (seen from front of antenna)
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(Ly1/Ry4)
342
1427 - 2690 MHz
(CLy2/CRy3)
Product
List
Product
Category
A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x652x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.0m
Single column
(2300 - 3800 MHz)
65° Broadcast
(2300 - 3800 MHz)
Service 0°
(2300 - 3800 MHz)
5G NR Broadcast
(2300 - 3800 MHz)
Multi-Beam-30°
(2300 - 2690 MHz)
Multi-Beam+30°
(2300 - 2690 MHz)
343
Product
List
Product
Category
A104521R03v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x652x15.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
< 1 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Power consumption (W)
Adjustment time (full range) (s)
Typ. 40
Calibration channel integrate the Bias-T and supporting OOK modulation signal
communication
RET interface 1 (RF feeder)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET interface 2 (485 connector)
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
TDD LTE EasyBeam Properties
Frequency range (MHz)
2300 - 2690
3300 - 3800
2 - 12
2 - 12
Electrical downtilt (°)
Horizontal 3dB beam
width (°)
Broadca
st beam Electrical azimuth (°)
Electrical azimuth step(°)
30
65
90
30
65
90
-15..+15
0
-15..+15
0
1
/
1
/
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
344
Product
List
Product
Category
A104521R0v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x652x16.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
1695 1990
690 - 803 790 - 862 824 - 894 880 - 960
Polarization
Electrical downtilt (°)
Gain (dBi)
2 x (1695 - 2690) (Ly1/Ry4)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
1920 2200
2200 2490
2490 2690
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable, each band
separately
2 - 12 , continuously adjustable, each band
separately
15.5
15.8
16.0
16.2
16.9
17.5
17.8
18.3
15.4±0.5
15.7±0.5
15.9±0.5
16.0±0.5
16.8 ±0.7
17.4 ±0.5
17.7 ±0.5
18.3 ±0.5
> 15
> 16
> 15
> 15
> 16
> 15
> 15
> 16
70 ±6
68 ±5
65 ±5
60 ±5
66 ±6
64 ±6
62 ±5
58 ±6
8.8 ±0.7
8.1 ±0.5
7.8 ±0.5
7.3 ±0.4
7.2 ±0.8
6.5 ±0.8
5.7 ±0.6
5.2 ±0.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 26
≥ 26
Interband isolation (dB)
≥ 26
≥ 26
Front to back ratio , ±30° (dB)
> 21
> 22
> 22
> 22
> 24
> 25
> 26
> 26
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 16
> 15
> 16
> 17
0°
Max. effective power per port (W)
Intermodulation IM3 (dBc)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
50
50
DC Ground
DC Ground
Electrical Properties
2 x (1427 - 2690) (CLy2/CRy3)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.3
16.9
17.5
17.9
18.5
15.2 ±0.6
16.8 ±0.5
17.4 ±0.5
17.8 ±0.5
18.5 ±0.5
> 15
> 16
> 15
> 16
> 16
72 ±8
68 ±6
67 ±6
61 ±5
58 ±7
9.0 ±0.8
7.2 ±0.8
6.5 ±0.8
5.7 ±0.7
5.2 ±0.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 26
≥ 26
Interband isolation (dB)
≥ 26
Front to back ratio , ±30° (dB)
> 25
> 25
> 25
> 26
> 26
Cross polar ratio (dB)
> 17
> 18
> 18
> 18
> 18
0°
Max. effective power per port
(W)
≥ 26
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
345
Product
List
Product
Category
A104521R0v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x652x16.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.6m
General Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
2300 - 2690
Polarization
General
parameters
2 - 12, continuously adjustable, each band
separately
Electrical downtilt (°)
Electrical downtilt tolerance (°)
±1
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each
antenna port (dB)
Calibration
and
electrical
parameters
3300 - 3800
+45° , -45°
Max. amplitude tolerance from calibration port to input
ports (dB)
Max. phase tolerance from calibration port to input ports (°)
Ports VSWR
-26 ±2
-26 ±2
0.7
0.9
6
8
1.5
1.5
Co-polarization isolation between ports (dB)
≥ 20
≥ 20
Cross-polarization isolation between ports (dB)
≥ 23
≥ 23
* Max. effective power whole antenna: 1800 W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
Gain (dBi)
65°
Broadcast
beam
Service
beam
Soft split
multi-beam
15.0
16.8
70
Front to back ratio (dB)
≥ 25
≥ 25
Cross polar ratio (0°) (dB)
≥ 15
≥ 15
8.0
5.6
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
Gain (dBi)
16.2
17.0
Vertical 3dB beam width (°)
65
63
Front to back ratio (dB)
≥ 26
≥ 25
Cross polar ratio (0°) (dB)
≥ 17
≥ 16
8.0
5.6
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
0°direct beam gain (dBi)
20.2
22.0
Horizontal 3dB beam width (°)
Radiation
parameters
3300 - 3800
90
Horizontal 3dB beam width (°)
Single
column
beam
2300 - 2690
Vertical 3dB beam width (°)
26
18
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (dB)
≥ 18
≥ 18
Gain (dBi)
19.4
/
31
/
Front to back ratio (dB)
≥ 30
/
Cross ploar ratio at boresight (dB)
≥ 19
/
0°direction beam horizontal 3dB beam width (°)
Horizontal 3dB beam width (°)
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
346
Product
List
Product
Category
A104521R0v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x652x16.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.6m
5G NR Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
Gain (dBi)
90
70
≥ 25
Cross polar ratio (0°) (dB)
≥ 15
≥ 15
8.0
5.6
Side lobe suppression for first side lobe above main
beam (dB)
≥ 15
≥ 15
Gain (dBi)
19.9
21.7
65
65
≥ 26
≥ 30
8.0
5.6
Side lobe suppression for first side lobe above main
beam (dB)
≥ 16
≥ 15
0°direct beam gain (dBi)
20.2
22.0
Horizontal 3dB beam width (°)
NR Broadcast
beam
Front to back ratio (dB)
Vertical 3dB beam width (°)
26
18
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (0°) (dB)
≥ 18
≥ 18
0°direction beam horizontal 3dB beam width (°)
NR Service beam
16.8
≥ 25
Vertical 3dB beam width (°)
Radiation
parameters
3300 - 3800
15.0
Front to back ratio (dB)
Horizontal 3dB beam width (°)
Single column
beam
2300 - 2690
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
106
2550 x 469 x 206
Packing dimensions (H x W x D) (mm)
2825 x 555 x 255
Antenna weight (kg)
(693)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
45.8
Clamps weight (kg)
6.3 (2 units)
62.3 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
1782
Frontal:
780 (at 150 km/h)
Lateral:
485 (at 150 km/h)
Maximum: 1035 (at 150 km/h)
Wind load (N)
200
Survival wind speed (km/h)
250
12 x 4.3-10 Female
1 x MQ4 Male + 1 x MQ5 Male
Connector
Connector position
Bottom
75
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
2550
Antenna packing weight (kg)
Model
Description
Weight Units per antenna
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 8 ° 3.1 kg
1 (Separate packing)
347
Product
List
Product
Category
A104521R0v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x652x16.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.6m
c
b
d
e
RET S/N:
a HWMxxxx……Lr1
RAE S/N:
g HWXxxxx……..p1
b HWMxxxx……Ly1
g
c HWMxxxx….CLy2
d HWMxxxx….CRy3
e HWMxxxx……Ry4
a
f f HWMxxxx……Rr2
r - Red
L - Left array
y - Yellow
R - Right array
g HWMxxxx……..p1
p - Purple
C - Center array
L CL CR R
y1
y2
y3
y4
MQ5-4
p1.L+
MQ5-3
p1.CL+
MQ5-2
p1.CR+
MQ5-1
p1.R+
MQ4-4
p1.L-
MQ4-3
p1.CL-
MQ4-2
p1.CR-
MQ4-1
p1.R-
Physical array & port mapping according to AISG naming convention:
Left - Center Left - Center Right - Right (seen from front of antenna)
p1 p1 p1 p1
r1
r2
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1695 - 2690 MHz
(Ly1/Ry4)
348
1427 - 2690 MHz
(CLy2/CRy3)
Product
List
Product
Category
A104521R0v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x652x16.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.6m
Single column
(2300 - 3800 MHz)
65° Broadcast
(2300 - 3800 MHz)
Service 0°
(2300 - 3800 MHz)
5G NR Broadcast
(2300 - 3800 MHz)
Multi-Beam-30°
(2300 - 2690 MHz)
Multi-Beam+30°
(2300 - 2690 MHz)
349
Product
List
Product
Category
A104521R0v06
D10X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800-7x652x16.5i/2x18i/2x18i/22i-7xM-R EasyRET 20-port 2L4H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 7 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
< 1 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Power consumption (W)
Adjustment time (full range) (s)
Typ. 40
Calibration channel integrate the Bias-T and supporting OOK modulation signal
communication
RET interface 1 (RF feeder)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET interface 2 (485 connector)
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
TDD LTE EasyBeam Properties
Frequency range (MHz)
2300 - 2690
3300 - 3800
2 - 12
2 - 12
Electrical downtilt (°)
Horizontal 3dB beam
width (°)
Broadca
st beam Electrical azimuth (°)
Electrical azimuth step(°)
30
65
90
30
65
90
-15..+15
0
-15..+15
0
1
/
1
/
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
350
Product
List
Product
Category
A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-3800)
-8x65-14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
3.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 1.5m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1 / Rr2)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
Polarization
0 - 14 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
880 - 960
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
13.5
13.8
14.0
14.1
13.5 ±0.5
13.7 ±0.5
13.9 ±0.5
14.0 ±0.5
> 15
> 15
> 15
> 15
69 ±7
68 ±6
68 ±6
67 ±6
14.9 ±1.4
13.5 ±1.3
12.8 ±1.2
12.2 ±1.1
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 20
> 21
> 22
> 22
Cross polar ratio (dB)
> 17
> 18
> 18
> 18
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1427 - 2200) (Lb1 / Rb2)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2 x (2490 - 2690) (Ly1 / Ry3)
+45° , -45°
2 - 12 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.4
16.5
16.8
17.1
15.2 ±0.6
16.4 ±0.5
16.7 ±0.5
17.0 ±0.5
> 15
> 16
> 16
> 16
69 ±7
62 ±6
60 ±6
58 ±5
9.1 ±0.8
7.5 ±0.7
6.8 ±0.6
5.3 ±0.5
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 23
> 26
> 25
> 24
Cross polar ratio (dB)
> 17
> 18
> 18
> 17
0°
Max. effective power per port
(W)
≥ 28
≥ 28
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
351
Product
List
Product
Category
A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-3800)
-8x65-14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
3.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 1.5m
Electrical Properties
1695 - 2690(Cy2)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe
above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.6
17.0
17.1
17.4
16.5 ±0.5
16.9 ±0.5
17.0 ±0.6
17.3 ±0.6
> 15
> 16
> 16
> 15
66 ±6
61 ±6
60 ±6
58 ±6
7.2 ±0.6
6.5 ±0.6
5.7 ±0.5
5.2 ±0.5
> 26
> 26
> 25
> 18
> 18
> 18
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
Cross polar ratio (dB)
> 26
0°
> 18
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
General Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
Polarization
General
parameters
+45° , -45°
2 - 12, continuously adjustable
Electrical downtilt (°)
Electrical downtilt tolerance (°)
±1
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each antenna port
(dB)
Calibration
and electrical
parameters
-26 ±2
Max. amplitude tolerance from calibration port to input ports (dB)
0.9
Max. phase tolerance from calibration port to input ports (°)
7
Ports VSWR
1.5
Co-polarization isolation between ports (dB)
≥ 20
Cross-polarization isolation between ports (dB)
≥ 23
* Max. effective power whole antenna: 800 W (at 50℃ ambient temperature)
352
Product
List
Product
Category
A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-3800)
-8x65-14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
3.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 1.5m
TDD LTE Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
Gain (dBi)
15.6
70
Horizontal 3dB beam width (°)
Single column
beam
Front to back ratio (dB)
≥ 24
Cross polar ratio (0°) (dB)
≥ 15
5.5
Vertical 3dB beam width (°)
Radiation
parameters
Side lobe suppression for first side lobe above main beam (dB)
≥ 15
Gain (dBi)
16.9
65
Horizontal 3dB beam width (°)
65° Broadcast
beam
Front to back ratio (dB)
≥ 25
Cross polar ratio (0°) (dB)
≥ 15
5.5
Vertical 3dB beam width (°)
Service beam
Side lobe suppression for first side lobe above main beam (dB)
≥ 15
0°direct beam gain (dBi)
20.7
21
0°direction beam horizontal 3dB beam width (°)
0°direction beam front to back ratio (dB)
≥ 30
0°direction beam cross polar ratio (dB)
≥ 19
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
5G NR Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
Gain (dBi)
15.6
70
Horizontal 3dB beam width (°)
Single column beam
Front to back ratio (dB)
≥ 24
Cross polar ratio (0°) (dB)
≥ 15
5.5
Vertical 3dB beam width (°)
Radiation
parameters
Side lobe suppression for first side lobe above main
beam (dB)
≥ 15
Gain (dBi)
20.7
65
Horizontal 3dB beam width (°)
NR Broadcast beam
NR Service beam
≥ 25
Front to back ratio (dB)
Vertical 3dB beam width (°)
5.5
Side lobe suppression for first side lobe above main
beam (dB)
≥ 15
0°direct beam gain (dBi)
20.7
0°direction beam horizontal 3dB beam width (°)
21
0°direction beam front to back ratio (dB)
30
0°direction beam cross polar ratio (0°) (dB)
19
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
353
Product
List
Product
Category
A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-3800)
-8x65-14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
3.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 1.5m
Mechanical Properties
1509 x 499 x 206
Packing dimensions (H x W x D) (mm)
1770 x 555 x 245
Antenna weight (kg)
38.0
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
68
(85)
Antenna dimensions (H x W x D) (mm)
49.5 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal:
Lateral:
Maximum:
Wind load (N)
1365
1509
Mast diameter supported (mm)
540 (at 150 km/h)
270 (at 150 km/h)
705 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector position
59
14 x 4.3-10 Female
1 x MQ4 Male + 1 x MQ5 Male
Connector
Bottom
Accessories
Item
Model
Description
Weight Units per antenna
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 16 ° 3.1 kg 1 (Separate packing)
RET S/N:
HWMxxx……Lr1
HWMxxx……Ry3
HWMxxx……Lb1
HWMxxx……Rb2
HWMxxx……Ly1 g HWMxxx……Rr2
h
d HWMxxx……Cy2 h HWMxxx……..p1
g
r - Red
L - Left array
y - Yellow
R - Right array
b - Blue
C - Center array
RAE S/N:
HWXxxx……..p1
h
p - Purple
y2
y1
MQ5-4
p1.1+
MQ5-3
p1.2+
MQ5-2
p1.3+
MQ5-1
p1.4+
MQ4-4
p1.1-
MQ4-3
p1.2-
MQ4-2
p1.3-
MQ4-1
p1.4-
y3
p1 p1 p1 p1
b1
r1
b2
r2
Notes:
Before installing the antenna, it is recommended to plan the use of antenna connectors based on frequency bands in use currently
and in the future. This is to avoid adjusting antenna connector configuration when new frequency bands are deployed.
354
Product
List
Product
Category
A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-3800)
-8x65-14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
3.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 1.5m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 1 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
TDD LTE EasyBeam Properties
Frequency range (MHz)
3300 - 3800
2 - 12
Electrical downtilt (°)
Broadcast
beam
30
Horizontal 3dB beam width (°)
Electrical azimuth (°)
Electrical azimuth step(°)
65
90
-15..+15
0
1
/
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Pattern sample for reference
690 - 960 MHz
(Lr1 / Rr2)
1695 - 2690 MHz
(Cy2)
355
Product
List
Product
Category
A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-3800)
-8x65-14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
3.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 1.5m
1427 - 2200 MHz
(Lb1/Rb2)
2490 - 2690 MHz
(Ly1/Ry3)
Single column
(3300 - 3800 MHz)
65° Broadcast
(3300 - 3800 MHz)
5G NR Broadcast
(3300 - 3800 MHz)
Service 0°
(3300 - 3800 MHz)
356
Product
List
Product
Category
AOC4518R8v06
D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/23003800-8x65-15.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1 / Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
880 - 960
0 - 10 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
824 - 894
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
14.8
15.1
15.3
15.6
14.7 ±0.5
15.0 ±0.5
15.2 ±0.5
15.5 ±0.5
> 16
> 16
> 16
> 16
65 ±5
62 ±5
60 ±5
60 ±5
10.9 ±0.7
9.8 ±0.6
9.4 ±0.5
8.9 ±0.5
> 22
> 23
> 23
> 18
> 18
> 18
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 21
Cross polar ratio (dB)
> 18
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1427 - 2690 (Ry3)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.0
17.2
17.4
17.5
17.6
15.9 ±0.5
17.1 ±0.5
17.3 ±0.5
17.4 ±0.5
17.5 ±0.5
> 16
> 16
> 16
> 16
> 16
70 ±6
68 ±5
67 ±5
65 ±5
58 ±5
8.7 ±0.5
7.1 ±0.5
6.3 ±0.5
5.6 ±0.5
5.1 ±0.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 25
> 26
> 26
> 26
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
357
Product
List
Product
Category
AOC4518R8v06
D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/23003800-8x65-15.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.0m
Electrical Properties
1695 - 2200 (Lb1)
Frequency range (MHz)
1695 - 1990
Polarization
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
2490 - 2690 (Ly1)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.7
16.8
17.0
16.6 ±0.5
16.7 ±0.5
16.9 ±0.5
> 16
> 16
> 17
67 ±5
66 ±5
58 ±5
7.5 ±0.5
6.8 ±0.5
5.3 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 25
Cross polar ratio (dB)
> 18
0°
Max. effective power per port (W)
> 26
> 25
> 18
> 18
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1695 - 2200 (Rb2)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
2490 - 2690 (Cy2)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.8
16.9
17.2
16.7 ±0.5
16.8 ±0.5
17.1 ±0.5
> 16
> 16
> 17
62 ±5
61 ±5
58 ±5
7.6 ±0.5
6.8 ±0.5
5.3 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 27
> 27
> 26
Cross polar ratio (dB)
> 18
> 18
> 18
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
358
Product
List
Product
Category
AOC4518R8v06
D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/23003800-8x65-15.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.0m
General Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
2300 - 2690
Polarization
General
parameter
s
2 - 12, continuously adjustable
Electrical downtilt (°)
Electrical downtilt tolerance (°)
±1
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each
antenna port (dB)
Calibratio
n and
electrical
parameter
s
3300 - 3800
+45° , -45°
Max. amplitude tolerance from calibration port to input ports
(dB)
Max. phase tolerance from calibration port to input ports (°)
Ports VSWR
-26 ±2
-26 ±2
0.7
0.9
5
7
1.5
1.5
Co-polarization isolation between ports (dB)
≥ 20
≥ 20
Cross-polarization isolation between ports (dB)
≥ 23
≥ 23
* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
Gain (dBi)
Horizontal 3dB beam width (°)
Single
column
beam
Front to back ratio (dB)
65°
Broadcast
beam
Service
beam
Soft split
multi-beam
3300 - 3800
15.0
15.7
90
70
≥ 25
≥ 25
Cross polar ratio (0°) (dB)
16
15
Vertical 3dB beam width (°)
8.0
5.5
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
Gain (dBi)
16.0
17.1
Horizontal 3dB beam width (°)
Radiation
parameters
2300 - 2690
Front to back ratio (dB)
65
65
≥ 26
≥ 25
Cross polar ratio (0°) (dB)
17
16
Vertical 3dB beam width (°)
8.0
5.5
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
21.1
0°direct beam gain (dBi)
20.0
0°direction beam horizontal 3dB beam width (°)
26
20
0°direction beam front to back ratio (dB)
30
30
0°direction beam cross polar ratio (dB)
19
19
Gain (dBi)
19
/
Horizontal 3dB beam width (°)
32
/
≥ 30
/
19
/
Front to back ratio (dB)
Cross polar ratio at boresight (dB)
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
359
Product
List
Product
Category
AOC4518R8v06
D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/23003800-8x65-15.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.0m
5G NR Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
2300 - 2690
3300 - 3800
15.0
15.7
90
70
Front to back ratio (dB)
≥ 25
≥ 25
Cross polar ratio (0°) (dB)
≥ 16
15
Gain (dBi)
Horizontal 3dB beam width (°)
Single column
beam
8.0
5.5
Side lobe suppression for first side lobe
above main beam (dB)
≥ 15
≥ 15
Gain (dBi)
19.7
20.8
65
65
≥ 26
25
Vertical 3dB beam width (°)
Radiation
parameters
Horizontal 3dB beam width (°)
NR Broadcast
beam
Front to back ratio (dB)
8.0
5.5
Side lobe suppression for first side lobe
above main beam (dB)
≥ 15
≥ 15
0°direct beam gain (dBi)
20.0
21.1
26
20
0°direction beam front to back ratio (dB)
≥ 30
30
0°direction beam cross polar ratio (0°) (dB)
≥ 19
19
Vertical 3dB beam width (°)
0°direction beam horizontal 3dB beam width
(°)
NR Service beam
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
68
59
Antenna dimensions (H x W x D) (mm)
2099 x 449 x 196
Packing dimensions (H x W x D) (mm)
2360 x 535 x 240
Antenna weight (kg)
(635)
Mechanical Properties
Distance between TDD columns (mm)
43.0
Clamps weight (kg)
6.3 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2099
55.4 (Included clamps)
1405
Antenna packing weight (kg)
Frontal:
615 (at 150 km/h)
Lateral:
375 (at 150 km/h)
Maximum: 810 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
Connector position
59
14 x 4.3-10 Female
1 x MQ4 Male + 1 x MQ5 Male
Bottom
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Model
Description
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 12 °
Weight Units per antenna
3.1 kg
360
1 (Separate packing)
Product
List
Product
Category
AOC4518R8v06
D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/23003800-8x65-15.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
< 1.5 (when the motor does not work, 12 V)
< 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Power consumption (W)
Adjustment time (full range) (s)
Typ. 40
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
TDD LTE EasyBeam Properties
Frequency range (MHz)
2300 - 2690
3300 - 3800
2 - 12
2 - 12
Electrical downtilt (°)
Horizontal 3dB beam width
(°)
30
Broadca
st beam Electrical azimuth (°)
65
90
30
65
90
-15..+15
0
-15..+15
0
1
/
1
/
Electrical azimuth step(°)
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
RAE S/N:
RET S/N:
HWMxxx……Lr1
h HWXxxx……..p1
HWMxxx……Ly1
HWMxxx……Lb1
h
d HWMxxx……Cy2
HWMxxx……Rb2
g
y1
y2
y3
b1
b2
HWMxxx……Ry3
r - Red
L - Left array
y - Yellow
b - Blue
p - Purple
R - Right array C - Center array
L
CL
CR
R
g HWMxxx……Rr2
p1
h HWMxxx……..p1
r1
p1
p1
p1
r2
Physical array & port mapping according to AISG naming convention:
Left - Center Left - Center Right - Right (seen from front of antenna)
MQ5-4
p1.L+
MQ5-3
p1.CL+
MQ5-2
p1.CR+
MQ5-1
p1.R+
MQ4-4
p1.L-
MQ4-3
p1.CL-
MQ4-2
p1.CR-
MQ4-1
p1.R-
361
Product
List
Product
Category
AOC4518R8v06
D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/23003800-8x65-15.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.0m
Pattern sample for reference
690 - 960 MHz
(Lr1 / Rr2)
1427 - 2690 MHz
(Ry3)
1695 - 2200 MHz
(Lb1)
2490 - 2690 MHz
(Ly1)
1695 - 2200 MHz
(Rb2)
2490 - 2690 MHz
(Cy2)
362
Product
List
Product
Category
AOC4518R8v06
D8X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/23003800-8x65-15.5i/15.5i/17.5i/17i/17i/17i/17i/17i-8xM-R EasyRET 2L5H
FDD/2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.0m
Single column
(2300 - 3800 MHz)
65° Broadcast
(2300 - 3800 MHz)
5G NR Broadcast
(2300 - 3800 MHz)
Service 0°
(2300 - 3800 MHz)
Multi-Beam-30°
(2300 - 2690 MHz)
Multi-Beam+30°
(2300 - 2690 MHz)
363
Product
List
Product
Category
A114521R5v06
D11X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/4x(2300-3800)
-8x65-16.5i/16.5i/17.5i/17i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
880 - 960
0 - 10 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
824 - 894
+45° , -45°
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.6
16.0
16.2
16.4
15.5 ±0.6
15.8 ±0.6
16.0 ±0.7
16.2 ±0.8
> 16
> 16
> 16
> 16
66 ±7
65 ±7
66 ±7
64 ±7
8.9 ±0.8
8.1 ±0.8
7.9 ±0.7
7.4 ±0.7
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 21
> 23
> 23
> 23
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1427 - 2690 (Ry3)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.7
17.0
17.2
17.3
17.4
15.6 ±0.6
16.9 ±0.6
17.1 ±0.7
17.2 ±0.7
17.3 ±0.8
> 16
> 16
> 16
> 16
> 16
73 ±7
66 ±6
67 ±6
62 ±6
58 ±6
8.4 ±0.7
6.8 ±0.6
6.0 ±0.6
5.3 ±0.5
4.9 ±0.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 24
> 25
> 26
> 26
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
364
Product
List
Product
Category
A114521R5v06
D11X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/4x(2300-3800)
-8x65-16.5i/16.5i/17.5i/17i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.6m
Electrical Properties
1695 - 2200 (Lb1)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
2490 - 2690 (Ly1)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.6
16.7
16.9
16.5 ±0.7
16.6 ±0.7
16.8 ±0.7
> 15
> 16
> 17
66 ±6
66 ±6
58 ±6
7.0 ±0.7
6.3 ±0.6
5.0 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 25
Cross polar ratio (dB)
> 18
0°
Max. effective power per port (W)
> 26
> 25
> 18
> 18
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1695 - 2200 (Rb2)
Frequency range (MHz)
1695 - 1990
Polarization
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
2490 - 2690 (Cy2)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
16.7
16.8
17.1
16.6 ±0.7
16.7 ±0.7
17.0 ±0.7
> 16
> 16
> 16
64 ±6
64 ±6
58 ±6
7.0 ±0.6
6.3 ±0.6
5.0 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 27
> 27
> 26
Cross polar ratio (dB)
> 18
> 18
> 18
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
365
Product
List
Product
Category
A114521R5v06
D11X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/4x(2300-3800)
-8x65-16.5i/16.5i/17.5i/17i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.6m
General Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
2300 - 2690
Polarization
General
parameter
s
+45° , -45°
2 - 12, continuously adjustable
Electrical downtilt (°)
Electrical downtilt tolerance (°)
±1
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each
antenna port (dB)
Calibratio
n and
electrical
parameter
s
3300 - 3800
-26 ±2
-26 ±2
Max. amplitude tolerance from calibration port to input ports
(dB)
0.7
0.9
Max. phase tolerance from calibration port to input ports (°)
5
7
Ports VSWR
1.5
1.5
Co-polarization isolation between ports (dB)
≥ 20
≥ 20
Cross-polarization isolation between ports (dB)
≥ 23
≥ 23
* Max. effective power whole antenna: 1100 W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
2300 - 2690
3300 - 3800
15.0
15.7
90
70
Front to back ratio (dB)
≥ 25
≥ 25
Cross polar ratio (0°) (dB)
≥ 16
≥ 15
8.0
5.5
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
Gain (dBi)
16.0
17.1
65
65
Front to back ratio (dB)
≥ 26
≥ 25
Cross polar ratio (0°) (dB)
≥ 17
≥ 16
8.0
5.5
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
0°direct beam gain (dBi)
20.0
21.1
Gain (dBi)
Horizontal 3dB beam width (°)
Single
column
beam
Vertical 3dB beam width (°)
Horizontal 3dB beam width (°)
Radiation
parameters
65°
Broadcast
beam
Service
beam
Soft split
multi-beam
Vertical 3dB beam width (°)
26
20
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (dB)
0°direction beam horizontal 3dB beam width (°)
≥ 19
≥ 19
Gain (dBi)
19
/
Horizontal 3dB beam width (°)
32
/
Front to back ratio (dB)
≥ 30
/
Cross polar ratio at boresight (dB)
≥ 19
/
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
366
Product
List
Product
Category
A114521R5v06
D11X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/4x(2300-3800)
-8x65-16.5i/16.5i/17.5i/17i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.6m
5G NR Electrical Properties
2300 - 3800 (p1)
Frequency range (MHz)
Gain (dBi)
70
≥ 25
Cross polar ratio (0°) (dB)
≥ 16
≥ 15
8.0
5.5
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
Gain (dBi)
19.7
20.8
Front to back ratio (dB)
Vertical 3dB beam width (°)
Side lobe suppression for first side lobe above
main beam (dB)
0°direct beam gain (dBi)
NR Service beam
15.7
≥ 25
Horizontal 3dB beam width (°)
NR Broadcast
beam
15.0
Front to back ratio (dB)
Vertical 3dB beam width (°)
Radiation
parameters
3300 - 3800
90
Horizontal 3dB beam width (°)
Single column
beam
2300 - 2690
0°direction beam horizontal 3dB beam width
(°)
65
65
≥ 26
≥ 25
8.0
5.5
≥ 15
≥ 15
20.0
21.1
26
20
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (0°) (dB)
≥ 19
≥ 19
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
68
Distance between TDD columns (mm)
59
Antenna dimensions (H x W x D) (mm)
2769 x 449 x 196
Packing dimensions (H x W x D) (mm)
2975 x 540 x 245
Antenna weight (kg)
50
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(805)
Mechanical Properties
67.4 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Operational temperature (℃)
-40 .. +65
Frontal:
840 (at 150 km/h)
Lateral:
515 (at 150 km/h)
Maximum: 1105 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
2769
Light grey
1905
Radome colour
14 x 4.3-10 Female
1 x MQ4 Male + 1 x MQ5 Male
Connector
Connector position
Bottom
*GFRPP: Glass Fiber Reinforced Polypropylene
Item
59
Accessories
Model
Description
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 8 °
Weight Units per antenna
3.1 kg
367
1 (Separate packing)
Product
List
Product
Category
A114521R5v06
D11X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/4x(2300-3800)
-8x65-16.5i/16.5i/17.5i/17i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.6m
RET S/N:
RAE S/N:
HWMxxx……Lr1
h HWXxxx……..p1
HWMxxx……Ly1
h
HWMxxx……Lb1
g
d HWMxxx……Cy2
HWMxxx……Rb2
r - Red
y - Yellow
b - Blue
p - Purple
L - Left array R - Right array C - Center array
HWMxxx……Ry3
g HWMxxx……Rr2
h HWMxxx……..p1
L CL CR R
y1
y2
b1
b2
p1
r1
p1
y3
p1
p1
r2
MQ5-4
p1.L+
MQ5-3
p1.CL+
MQ5-2
p1.CR+
MQ5-1
p1.R+
MQ4-4
p1.L-
MQ4-3
p1.CL-
MQ4-2
p1.CR-
MQ4-1
p1.R-
Physical array & port mapping according to AISG naming convention:
Left - Center Left - Center Right - Right (seen from front of antenna)
368
Product
List
Product
Category
A114521R5v06
D11X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/4x(2300-3800)
-8x65-16.5i/16.5i/17.5i/17i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
< 1 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Power consumption (W)
Adjustment time (full range) (s)
Typ. 40
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
TDD LTE EasyBeam Properties
Frequency range (MHz)
2300 - 2690
3300 - 3800
2 - 12
2 - 12
Electrical downtilt (°)
Horizontal 3dB beam
width (°)
Broadca
st beam Electrical azimuth (°)
Electrical azimuth step(°)
30
65
90
30
65
90
-15..+15
0
-15..+15
0
1
/
1
/
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
369
Product
List
Product
Category
A114521R5v06
D11X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/4x(2300-3800)
-8x65-16.5i/16.5i/17.5i/17i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.6m
Pattern sample for reference
690 - 960 MHz
(Lr1 / Rr2)
1427 - 2690 MHz
(Ry3)
1695 - 2200 MHz
(Lb1)
2490 - 2690 MHz
(Ly1)
1695 - 2200 MHz
(Rb2)
2490 - 2690 MHz
(Cy2)
370
Product
List
Product
Category
A114521R5v06
D11X-2x(690-960)/1427-2690/2x(1695-2200)/2x(2490-2690)/4x(2300-3800)
-8x65-16.5i/16.5i/17.5i/17i/17i/17i/17i/21i-8xM-R EasyRET 22-port 2L5H FDD/
2.3-3.8GHz 8T8R TDD Antenna with 8 Integrated RCUs - 2.6m
Single column
(2300 - 3800 MHz)
65° Broadcast
(2300 - 3800 MHz)
5G NR Broadcast
(2300 - 3800 MHz)
Service 0°
(2300 - 3800 MHz)
Multi-Beam-30°
(2300 - 2690 MHz)
Multi-Beam+30°
(2300 - 2690 MHz)
371
Product
List
Product
Category
A134521R03v06
D13X-690-862/880-960/690-960/2x1427-2690/4x1695-2690/4x2300-3800
-10x65-15.5i/16i/16i/2x18i/4x18i/21i-10xM-R EasyRET 26-Port3L6H FDD/
2.3-3.8GHz 8T8R TDD Antenna with Integrated RCUs - 2.6m
Preliminary Issue
Electrical Properties
690 - 862
Frequency range (MHz)
690 - 803
2 - 12
Electrical downtilt (°)
Gain (dBi)
690 - 960
880 - 960
790 - 862
690 - 803
790 - 862
2 - 12
880 - 960
2 - 12
15.5
15.8
16.0
15.6
15.9
16.2
Side lobe suppression for first
side lobe above main beam
(Typ.) (dB)
15
15
15
15
16
15
Horizontal 3dB beam width (°)
70
68
63
70
67
62
Vertical 3dB beam width (°)
8.2
7.4
6.4
8.8
8.0
7.2
VSWR
< 1.5
Front to back ratio, copolar (dB)
Typ. 25
Cross polar ratio (dB)
Typ. 17
0°
Max. power per input (W)
350 (at 50℃ambient temperature)*
Intermodulation IM3 (dBc)
400 (at 50℃ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
Grounding
DC Ground
Electrical Properties
4 x (1695 - 2690)
Frequency range (MHz)
1695 - 2200
2 x (1427 - 2690)
2200 - 2690
1427 - 1518
17.3
18.0
15.2
17.2
17.9
Side lobe suppression for first
side lobe above main beam (Typ.)
(dB)
16
16
15
16
16
Horizontal 3dB beam width (°)
68
60
70
67
60
Vertical 3dB beam width (°)
7.3
5.6
9.2
7.2
5.5
2 - 12
Electrical downtilt (°)
Gain (dBi)
2200 - 2690
2 - 12
VSWR
< 1.5
Front to back ratio, copolar (dB)
Typ. 25
Cross polar ratio (dB)
Typ. 17
Max. power per input (W)
1695 - 2200
0°
250 (at 50℃ambient temperature)*
Intermodulation IM3 (dBc)
250 (at 50℃ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
Grounding
DC Ground
372
Product
List
Product
Category
A134521R03v06
D13X-690-862/880-960/690-960/2x1427-2690/4x1695-2690/4x2300-3800
-10x65-15.5i/16i/16i/2x18i/4x18i/21i-10xM-R EasyRET 26-Port3L6H FDD/
2.3-3.8GHz 8T8R TDD Antenna with Integrated RCUs - 2.6m
General Electrical Properties
2300 - 3800
Frequency range (MHz)
General
parameters
2300 - 2690
Polarization
3300 - 3800
+45° , -45°
2 - 12
Electrical downtilt (°)
Max. power per input (W)
50 (at 50℃ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each antenna port
(dB)
Calibration
and
electrical
parameters
-26 ±2
-26 ±2
0.7
0.9
Max. amplitude tolerance from calibration port to input ports (dB)
Max. phase tolerance from calibration port to input ports (°)
Ports VSWR
6
8
1.5
1.5
Co-polarization isolation between ports (dB)
≥ 20
≥ 20
Cross-polarization isolation between ports (dB)
≥ 23
≥ 23
* Total power 1300W (at 50℃ ambient temperature )
TDD LTE Electrical Properties
2300 - 3800
Frequency range (MHz)
Gain (dBi)
Single
column
beam
Radiation
parameters
Horizontal 3dB beam width (°)
Front to back ratio (dB)
65°
Broadcast
beam
15.7
90
70
Typ. 25
Typ. 25
Vertical 3dB beam width (°)
8.0
5.6
15.8
17.0
65
63
Typ. 26
Typ. 25
Vertical 3dB beam width (°)
8.0
5.6
0°direct beam gain (dBi)
19.8
21
26
18
Typ. 30
Typ. 30
Front to back ratio (dB)
0°direction beam horizontal 3dB beam width (°)
0°direction beam front to back ratio (dB)
Soft split
multi-beam
3300 - 3800
14.8
Gain (dBi)
Horizontal 3dB beam width (°)
Service
beam
2300 - 2690
Gain (dBi)
19
/
Horizontal 3dB beam width (°)
31
/
Typ. 30
/
Front to back ratio (dB)
5G NR Electrical Properties
2300 - 3800
Frequency range (MHz)
Gain (dBi)
Single column beam
Horizontal 3dB beam width (°)
Front to back ratio (dB)
3300 - 3800
14.8
15.7
90
70
Typ. 25
Typ. 25
Vertical 3dB beam width (°)
8.0
5.6
Gain (dBi)
19.5
20.7
65
65
Typ. 25
Typ. 25
8.0
5.6
Broadcast beam
Horizontal 3dB beam width (°)
(PBCH/PSCH/SSCH with
Front to back ratio (dB)
HUAWEI gNodeB)
Vertical 3dB beam width (°)
0°direct beam gain (dBi)
Service beam
2300 - 2690
0°direction beam horizontal 3dB beam width (°)
Front to back ratio (dB)
373
19.8
21
26
18
Typ. 30
Typ. 30
Product
List
Product
Category
A134521R03v06
D13X-690-862/880-960/690-960/2x1427-2690/4x1695-2690/4x2300-3800
-10x65-15.5i/16i/16i/2x18i/4x18i/21i-10xM-R EasyRET 26-Port3L6H FDD/
2.3-3.8GHz 8T8R TDD Antenna with Integrated RCUs - 2.6m
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2769 x 469 x 206
Packing dimensions (H x W x D) (mm)
3000 x 565 x 265
Antenna net weight (kg)
60
Mechanical downtilt (°)
0-8
18 x 4.3-10 Female
1 x MQ4 Male + 1 x MQ5 Male
Connector
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ.40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol
switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
374
Product
List
Product
Category
A134521R0v06
D13X-2x(690-960)/2x(1427-2690)/1695-2690/4x(2300-2690)/
4x(3300-3800)-7x65-15.5i/15.5i/17.5i/17.5i/17.5i/16i/21i-7xM-R
EasyRET 26-port 2L3H FDD/2.3-2.6 & 3.3-3.8GHz 8T8R TDD
Antenna with 7 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
880 - 960
+45° , -45°
0 - 10 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
824 - 894
at mid Tilt
over all Tilts
14.8
15.1
15.3
15.6
14.7 ±0.5
15 ±0.5
15.2 ±0.5
15.5 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 15
> 15
> 16
> 16
Horizontal 3dB beam width (°)
67 ±7
64 ±5
62 ±5
60 ±6
10.8 ±0.8
9.9 ±0.7
9.5 ±0.6
8.9 ±0.6
Vertical 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio , ±30° (dB)
> 20
> 22
> 23
> 23
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1427 - 2690) (LTy2/RTy4)
Frequency range (MHz)
Polarization
Electrical downtilt (°)
Gain (dBi)
1695 - 2690 (CTy3)
1427 - 15181695 - 19901920 - 22002200 - 24902490 - 26901695 - 19901920 - 22002200 - 24902490 - 2690
at mid Tilt
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable, each band separately
2 - 12 , continuously adjustable
15.8
16.7
17
17
17.4
16.8
17.1
17.1
over all Tilts 15.7 ±0.5 16.6 ±0.5 16.9 ±0.5 16.9 ±0.8 17.3 ±0.6 16.7 ±0.5 17 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
> 16
> 16
> 16
> 16
> 16
> 16
17 ±0.6 17.4 ±0.5
> 16
> 17
70 ±6
66 ±4
68 ±5
65 ±6
58 ±6
61 ±5
64 ±5
61 ±5
61 ±5
7.2 ±0.6
6.5 ±0.6
5.6 ±0.5
5.1 ±0.5
7.2 ±0.5
6.4 ±0.5
5.7 ±0.4
5.2 ±0.4
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
≥ 28
Front to back ratio , ±30° (dB)
> 25
Cross polar ratio (dB)
> 18
0°
Intermodulation IM3 (dBc)
> 17
8.9 ±0.5
VSWR
Max. effective power per port (W)
17.5
> 26
> 26
> 26
> 25
> 18
> 18
> 18
> 18
> 27
> 27
> 26
> 25
> 18
> 18
> 18
> 18
250 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -150 (2 x 43 dBm carrier)
≤ -150 (2 x 43 dBm carrier)
50
50
DC Ground
DC Ground
Impedance (Ω)
Grounding
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
375
Product
List
Product
Category
A134521R0v06
D13X-2x(690-960)/2x(1427-2690)/1695-2690/4x(2300-2690)/
4x(3300-3800)-7x65-15.5i/15.5i/17.5i/17.5i/17.5i/16i/21i-7xM-R
EasyRET 26-port 2L3H FDD/2.3-2.6 & 3.3-3.8GHz 8T8R TDD
Antenna with 7 Integrated RCUs - 2.0m
General Electrical Properties
Frequency range (MHz)
2300 - 2690 (By1)
3300 - 3800 (p1)
+45° , -45°
+45° , -45°
2 - 12, continuously adjustable
2 - 12, continuously adjustable
±1
±1
60 (at 50℃ ambient
temperature)*
60 (at 50℃ ambient
temperature)*
50
50
DC Ground
DC Ground
Coupling factor between calibration
port and each antenna port (dB)
-26 ±2
-26 ±2
Max. amplitude tolerance from
calibration port to input ports (dB)
0.8
1.0
6
8
Ports VSWR
1.5
1.5
Co-polarization isolation between ports
(dB)
≥ 20
≥ 20
Cross-polarization isolation between ports
(dB)
≥ 23
≥ 23
Polarization
General
parameters
Electrical downtilt (°)
Electrical downtilt tolerance (°)
Max. effective power per port (W)
Impedance (Ω)
Grounding
Calibration
and
electrical
parameters
Max. phase tolerance from calibration
port to input ports (°)
Interband isolation (dB)
≥ 25
* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
Frequency range (MHz)
Gain (dBi)
Radiation
parameters
Service
beam
Soft split
multi-beam
15.3
70
Front to back ratio (dB)
≥ 24
≥ 24
Cross polar ratio (0°) (dB)
≥ 16
≥ 15
8.2
5.6
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
Gain (dBi)
16.0
16.8
Vertical 3dB beam width (°)
65
68
Front to back ratio (dB)
≥ 25
≥ 24
Cross polar ratio (0°) (dB)
≥ 17
≥ 16
8.2
5.6
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
0°direct beam gain (dBi)
19.8
20.8
Horizontal 3dB beam width (°)
65°
Broadcast
beam
3300 - 3800 (p1)
14.5
90
Horizontal 3dB beam width (°)
Single
column
beam
2300 - 2690 (By1)
Vertical 3dB beam width (°)
26
20
0°direction beam front to back ratio (dB)
≥ 28
≥ 28
0°direction beam cross polar ratio (dB)
≥ 19
≥ 19
Gain (dBi)
19.0
/
32
/
Front to back ratio (dB)
≥ 28
/
Cross polar ratio at boresight (dB)
≥ 18
/
0°direction beam horizontal 3dB beam width (°)
Horizontal 3dB beam width (°)
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
376
Product
List
Product
Category
A134521R0v06
D13X-2x(690-960)/2x(1427-2690)/1695-2690/4x(2300-2690)/
4x(3300-3800)-7x65-15.5i/15.5i/17.5i/17.5i/17.5i/16i/21i-7xM-R
EasyRET 26-port 2L3H FDD/2.3-2.6 & 3.3-3.8GHz 8T8R TDD
Antenna with 7 Integrated RCUs - 2.0m
5G NR Electrical Properties
Frequency range (MHz)
Gain (dBi)
90
70
≥ 24
Cross polar ratio (0°) (dB)
≥ 16
≥ 15
8.2
5.6
Side lobe suppression for first side lobe
above main beam (dB)
≥ 15
≥ 15
Gain (dBi)
19.5
20.6
65
65
≥ 26
≥ 25
8.2
5.6
Side lobe suppression for first side lobe
above main beam (dB)
≥ 15
≥ 15
0°direct beam gain (dBi)
19.8
20.8
26
20
Horizontal 3dB beam width (°)
NR Broadcast
beam
NR Service beam
15.3
≥ 24
Vertical 3dB beam width (°)
Radiation
parameters
3300 - 3800 (p1)
14.5
Front to back ratio (dB)
Horizontal 3dB beam width (°)
Single column
beam
2300 - 2690 (By1)
Front to back ratio (dB)
Vertical 3dB beam width (°)
0°direction beam horizontal 3dB beam width
(°)
0°direction beam front to back ratio (dB)
≥ 28
≥ 28
0°direction beam cross polar ratio (0°) (dB)
≥ 19
≥ 19
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
Mechanical Properties
Distance between TDD columns (mm)
55 @2300-2690
53 @3300-3800
Antenna dimensions (H x W x D) (mm)
2199 x 449 x 196
Packing dimensions (H x W x D) (mm)
2410 x 540 x 245
Antenna weight (kg)
47.2
Clamps weight (kg)
6.3 (2 units)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal:
645 (at 150 km/h)
Lateral:
395 (at 150 km/h)
Maximum: 850 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
Connector position
1405
2199
62.5 (Included clamps)
Mast diameter supported (mm)
10 x 4.3-10 Female
2 x MQ4 Male + 2 x MQ5 Male
59
Antenna packing weight (kg)
(735)
68
Bottom
*GFRPP: Glass Fiber Reinforced Polypropylene
377
Product
List
Product
Category
A134521R0v06
D13X-2x(690-960)/2x(1427-2690)/1695-2690/4x(2300-2690)/
4x(3300-3800)-7x65-15.5i/15.5i/17.5i/17.5i/17.5i/16i/21i-7xM-R
EasyRET 26-port 2L3H FDD/2.3-2.6 & 3.3-3.8GHz 8T8R TDD
Antenna with 7 Integrated RCUs - 2.0m
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 12 °
3.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 960 MHz
(Lr1 / Rr2)
Single column
(2300 - 2690 MHz)
Multi-Beam-30°
(2300 - 2690 MHz)
1427 - 2690 MHz
(LTy2 / RTy4)
1695 - 2690 MHz
(CTy3)
65° Broadcast
(2300 - 2690 MHz)
Service 0°
(2300 - 2690 MHz)
Multi-Beam+30°
(2300 - 2690 MHz)
378
Single column
(3300 - 3800 MHz)
Product
List
Product
Category
A134521R0v06
D13X-2x(690-960)/2x(1427-2690)/1695-2690/4x(2300-2690)/
4x(3300-3800)-7x65-15.5i/15.5i/17.5i/17.5i/17.5i/16i/21i-7xM-R
EasyRET 26-port 2L3H FDD/2.3-2.6 & 3.3-3.8GHz 8T8R TDD
Antenna with 7 Integrated RCUs - 2.0m
65° Broadcast
(3300 - 3800 MHz)
2.6G NR Broadcast
(2496 - 2690 MHz)
Service 0°
(3300 - 3800 MHz)
5G NR Broadcast
(3300 - 3800 MHz)
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
< 1.5 (when the motor does not work, 12 V)
< 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Power consumption (W)
Adjustment time (full range) (s)
Typ. 40
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
TDD LTE EasyBeam Properties
Frequency range (MHz)
2300 - 2690
3300 - 3800
2 - 12
2 - 12
Electrical downtilt (°)
Horizontal 3dB beam
width (°)
Broadca
st beam Electrical azimuth (°)
Electrical azimuth step(°)
30
65
90
30
65
90
-15..+15
0
-15..+15
0
1
/
1
/
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
379
Product
List
Product
Category
A134521R0v06
D13X-2x(690-960)/2x(1427-2690)/1695-2690/4x(2300-2690)/
4x(3300-3800)-7x65-15.5i/15.5i/17.5i/17.5i/17.5i/16i/21i-7xM-R
EasyRET 26-port 2L3H FDD/2.3-2.6 & 3.3-3.8GHz 8T8R TDD
Antenna with 7 Integrated RCUs - 2.0m
Integrated RET S/N:
HWMxxx……...Lr1
HWMxxx……LTy2
HWMxxx……CTy3
d HWMxxx……RTy4
y2
y3
y4
HWMxxx……...Rr2
HWMxxx……..By1
r - Red
L - Left array
T - Top
y - Yellow
R - Right array
B - Bottom
p - Purple
C - Center array
g
HWMxxx………p1
y1 y1 y1 y1 p1 p1 p1 p1
r1
r2
Integrated RAE S/N:
HWXxxx……..By1
g
L
CL CR
R
L
CL
HWXxxx……….p1
CR
R
MQ5-1
y1.R+
MQ5-1
p1.R+
MQ4-1
y1.R-
MQ4-1
p1.R-
MQ5-2
y1.CR+
MQ5-2
p1.CR+
MQ4-2
y1.CR-
MQ4-2
p1.CR-
MQ5-3
y1.CL+
MQ5-3
p1.CL+
MQ4-3
y1.CL-
MQ4-3
p1.CL-
MQ5-4
y1.L+
MQ5-4
p1.L+
MQ4-4
y1.L-
MQ4-4
p1.L-
Physical array & port mapping according to AISG naming convention:
Left - Center Left - Center Right - Right (seen from front of antenna)
380
Product
List
Product
Category
A144521R01v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-38008x65-2x16.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-port 2L4H FDD/2x(2.33.8GHz) 8T8R TDD Antenna with Integrated 8 RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894
Polarization
Electrical downtilt (°)
Gain (dBi)
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2 x (1695 - 2690) (Ly1/Ry4)
1695 1990
880 - 960
1920 2200
2200 2490
2490 2690
+45° , -45°
+45° , -45°
2 - 12 , continuously adjustable, each band
separately
2 - 12 , continuously adjustable, each band
separately
15.7
16.0
16.1
16.2
15.6±0.5
15.9±0.5
16.0±0.5
16.0 ±0.5
17.0
> 17
> 16
> 16
> 16
17.5
16.9 ±0.7 17.4±0.5
> 16
17.8
18.3
17.7 ±0.5
18.2 ±0.5
> 15
> 16
> 15
70 ±6
68 ±5
65 ±5
63 ±5
66 ±6
63 ±6
62 ±6
58 ±6
8.7 ±0.7
7.9 ±0.5
7.6 ±0.5
7.2 ±0.5
7.2 ±0.8
6.5 ±0.8
5.7 ±0.6
5.2 ±0.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 26
≥ 26
Interband isolation (dB)
≥ 26
≥ 26
Front to back ratio , ±30° (dB)
> 22
> 22
> 22
> 22
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
50
50
DC Ground
DC Ground
Intermodulation IM3 (dBc)
Impedance (Ω)
Grounding
Electrical Properties
2 x (1427 - 2690) (CLy2/CRy3)
Frequency range (MHz)
1427 - 1518
1695 - 1990
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
2 - 12 , continuously adjustable, each band separately
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.3
17.0
17.5
17.9
18.5
15.2 ±0.6
16.9 ±0.5
17.4 ±0.5
17.8 ±0.5
18.4 ±0.5
> 15
> 16
> 15
> 16
> 15
72 ±8
67 ±6
65 ±6
62 ±5
58 ±7
9.0 ±0.8
7.2 ±0.8
6.5 ±0.8
5.7 ±0.7
5.2 ±0.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 26
≥ 26
Interband isolation (dB)
≥ 26
Front to back ratio , ±30° (dB)
> 25
> 26
> 26
> 26
> 26
Cross polar ratio (dB)
> 16
> 18
> 18
> 18
> 18
0°
Max. effective power per port
(W)
≥ 26
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
381
Product
List
Product
Category
A144521R01v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-38008x65-2x16.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-port 2L4H FDD/2x(2.33.8GHz) 8T8R TDD Antenna with Integrated 8 RCUs - 2.6m
General Electrical Properties
2 x (2300 - 3800) (Lp1/Rp2)
Frequency range (MHz)
2300 - 2690
Polarization
General
parameters
2 - 12, continuously adjustable, each
band separately
Electrical downtilt (°)
Electrical downtilt tolerance (°)
±1
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each antenna
port (dB)
Calibration
and
electrical
parameters
3300 - 3800
+45° , -45°
-26 ±2
-26 ±2
0.7
0.9
Max. amplitude tolerance from calibration port to input ports (dB)
Max. phase tolerance from calibration port to input ports (°)
Ports VSWR
Intraband isolation
Co-polarization isolation between ports (dB)
Cross-polarization isolation between ports (dB)
Interband isolation between Lp1 and Rp2
6
8
1.5
1.5
≥ 20
≥ 20
≥ 23
≥ 23
≥ 23
≥ 26
* Max. effective power whole antenna : 2200 W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
2 x (2300 - 3800) (Lp1/Rp2)
Frequency range (MHz)
Gain (dBi)
70
≥ 22
≥ 22
Cross polar ratio (0°) (dB)
≥ 16
≥ 15
8.0
5.5
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
Gain (dBi)
16.2
17.0
Vertical 3dB beam width (°)
65
62
≥ 26
≥ 25
≥ 17
≥ 16
8.0
5.5
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
0°direct beam gain (dBi)
20.2
22.0
Front to back ratio (dB)
65°
Broadcast Cross polar ratio (0°) (dB)
beam
Vertical 3dB beam width (°)
Service
beam
Soft split
multibeam
16.5
Front to back ratio (dB)
Horizontal 3dB beam width (°)
Radiation
parameters
3300 - 3800
15.0
90
Horizontal 3dB beam width (°)
Single
column
beam
2300 - 2690
0°direction beam horizontal 3dB beam width (°)
25
17
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (dB)
≥ 18
≥ 17
Gain (dBi)
19.4
/
31
/
Front to back ratio (dB)
≥ 30
/
Cross polar ratio at boresight (dB)
≥ 18
/
Horizontal 3dB beam width (°)
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
382
Product
List
Product
Category
A144521R01v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-38008x65-2x16.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-port 2L4H FDD/2x(2.33.8GHz) 8T8R TDD Antenna with Integrated 8 RCUs - 2.6m
5G NR Electrical Properties
2 x (2300 - 3800) (Lp1/Rp2)
Frequency range (MHz)
2300 - 2690
3300 - 3800
15.0
16.5
90
70
Front to back ratio (dB)
≥ 22
≥ 22
Cross polar ratio (0°) (dB)
≥ 16
≥ 15
8.0
5.5
Side lobe suppression for first side lobe above main
beam (dB)
≥ 15
≥ 15
Gain (dBi)
19.9
21.7
Gain (dBi)
Horizontal 3dB beam width (°)
Single column
beam
Vertical 3dB beam width (°)
Radiation
parameters
Horizontal 3dB beam width (°)
NR Broadcast
beam
Front to back ratio (dB)
65
≥ 26
≥ 30
8.0
5.5
Side lobe suppression for first side lobe above main
beam (dB)
≥ 16
≥ 15
0°direct beam gain (dBi)
20.2
22.0
25
17
Vertical 3dB beam width (°)
0°direction beam horizontal 3dB beam width (°)
NR Service beam
65
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (0°) (dB)
≥ 18
≥ 17
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
106
Antenna dimensions (H x W x D) (mm)
2550 x 499 x 206
Packing dimensions (H x W x D) (mm)
2810 x 555 x 250
Antenna weight (kg)
(690)
Mechanical Properties
50.0
Clamps weight (kg)
6.3 (2 units)
66.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (°C)
-40 .. +65
1785
2550
Antenna packing weight (kg)
Frontal:
945 (at 150 km/h)
Lateral:
495 (at 150 km/h)
Maximum: 1235 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
12 x 4.3-10 Female
2 x MQ4 Male + 2 x MQ5 Male
Connector
Connector position
Bottom
75
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Model
Description
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 8 °
Weight Units per antenna
3.1 kg
1 (Separate packing)
383
Product
List
Product
Category
A144521R01v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-38008x65-2x16.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-port 2L4H FDD/2x(2.33.8GHz) 8T8R TDD Antenna with Integrated 8 RCUs - 2.6m
c
b
d
RET S/N:
e
a HWMxxx…………..Lr1
b HWMxxx…………..Ly1
g
c HWMxxx………...CLy2
h
d HWMxxx………...CRy3
e HWMxxx………….Ry4
a
f
f HWMxxx…………..Rr2
g HWMxxx…………..Lp1
r - Red
L - Left array
y - Yellow
R - Right array
p - Purple
C - Center array
h HWMxxx………….Rp2
RAE S/N:
g HWXxxx…………..Lp1
h HWXxxx…………..Rp2
L
y1
y2
y3
CL CR
R
L
CL CR
R
y4
MQ5-1
p1.R+
MQ5-1
p2.R+
MQ4-1
p1.R-
MQ4-1
p2.R-
MQ5-2
p1.CR+
MQ5-2
p2.CR+
MQ4-2
p1.CR-
MQ4-2
p2.CR-
MQ5-3
p1.CL+
MQ5-3
p2.CL+
MQ4-3
p1.CL-
MQ4-3
p2.CL-
MQ5-4
p1.L+
MQ5-4
p2.L+
MQ4-4
p1.L-
MQ4-4
p2.L-
p1 p1 p1 p1 p2 p2 p2 p2
r1
r2
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
Physical array & port mapping according to AISG naming convention:
Left - Center Left - Center Right - Right (seen from front of antenna)
1695 - 2690 MHz
(Ly1/Ry4)
384
1427 - 2690 MHz
(CLy2/CRy3)
Product
List
Product
Category
A144521R01v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-38008x65-2x16.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-port 2L4H FDD/2x(2.33.8GHz) 8T8R TDD Antenna with Integrated 8 RCUs - 2.6m
Single column
(2300 - 3800 MHz)
65° Broadcast
(2300 - 3800 MHz)
5G NR Broadcast
(2300 - 3800 MHz)
Service 0°
(2300 - 3800 MHz)
Multi-Beam-30°
(2300 - 2690 MHz)
Multi-Beam+30°
(2300 - 2690 MHz)
385
Product
List
Product
Category
A144521R01v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-38008x65-2x16.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-port 2L4H FDD/2x(2.33.8GHz) 8T8R TDD Antenna with Integrated 8 RCUs - 2.6m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 1 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40
Calibration channel integrate the Bias-T and supporting OOK modulation signal
communication
RET interface 1 (RF feeder)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET interface 2 (485 connector)
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
TDD LTE EasyBeam Properties
Frequency range (MHz)
2300 - 2690
3300 - 3800
2 - 12
2 - 12
Electrical downtilt (°)
Horizontal 3dB beam
width (°)
Broadca
st beam Electrical azimuth (°)
Electrical azimuth step(°)
30
65
90
30
65
90
-15..+15
0
-15..+15
0
1
/
1
/
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE,FCC, IC, RCM, RoHS, REACH, WEEE
386
Product
List
Product
Category
A164522R01v06
D16X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690/4x2300-3800/
4x2300-3800-10x65-2x15.5i/2x18i/2x17i/2x17.5i/22i/22i-10xM-R EasyRET
32-port 2L6H FDD /2x(2.3-3.8GHz) 8T8R TDD Antenna with Integrated
RCUs - 2.0m
Preliminary Issue
Electrical Properties
Frequency range (MHz)
2 x (690 - 960)
2 x (1427 - 2690)
2 x (1695 - 2200)
2 x (2490 - 2690)
2 - 12
2 - 12
2 - 12
Electrical downtilt (°)
2 - 12
Gain (dBi)
15.3
18.0
16.7
17.5
Side lobe suppression for first
side lobe above main beam (Typ.)
(dB)
15
15
15
15
Horizontal 3dB beam width (°)
68
65
65
62
Vertical 3dB beam width (°)
9.8
6.8
7.2
5.4
VSWR
< 1.5
Front to back ratio, copolar (dB)
Typ. 22
Typ. 25
Typ. 25
Typ. 25
Cross polar ratio (dB)
Typ. 17
Typ. 17
Typ. 17
Typ. 17
0°
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
≤ -150 (2 x 43 dBm carrier)
TDD Electrical Properties
2 x (2300-3800)
Frequency range (MHz)
2300 - 2690
2 - 12
Electrical downtilt (°)
Ports VSWR
1.5
15.0
16.5
Horizontal 3dB beam width (°)
90
70
Vertical 3dB beam width (°)
8
5.6
16.2
17.0
65
62
19.9
21.7
65
65
20.2
22.0
26
18
Gain (dBi)
Single column beam
LTE 65° Broadcast
beam
NR Broadcast beam
Gain (dBi)
Horizontal 3dB beam width (°)
Gain (dBi)
Horizontal 3dB beam width (°)
0° direct beam gain (dBi)
Service beam
3300 - 3800
0° direction beam horizontal 3dB beam
width(°)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2099 x 499 x 206
Antenna net weight (kg)
48
Mechanical downtilt (°)
0 - 12
Connector
16 x 4.3-10 Female
2x MQ4 Male+2x MQ5 Male
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
387
Product
List
Product
Category
A144522R02v06
D14X-2x690-960/2x1427-2690/2x1695-2690/4x2300-3800/4x2300-3800-8x652x15.5i/2x18i/2x18i/22i/22i-8xM-R EasyRET 28-port 2L2H FDD /2x
(2.3-3.8GHz) 8T8R TDD Antenna with Integrated RCUs - 2.0m
Preliminary Issue
Electrical Properties
Frequency range (MHz)
2 x (690 - 960)
2 x (1427 - 2690)
2 x (1695 - 2690)
2 - 12
Electrical downtilt (°)
Gain (dBi)
14.8
18.0
18.0
Side lobe suppression for first side lobe
above main beam (Typ. ) (dB)
16
16
16
Horizontal 3dB beam width (°)
70
69
66
Vertical 3dB beam width (°)
9.8
6.8
6.8
VSWR
< 1.5
Front to back ratio , ±30° (dB)
Typ. 22
Typ. 25
Typ. 25
Cross polar ratio (dB)
Typ. 18
Typ. 18
Typ. 18
0°
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
TDD Electrical Properties
2 x (2300-3800)
Frequency range (MHz)
2300 - 2690
2 - 12
Electrical downtilt (°)
Ports VSWR
1.5
15.0
16.5
Horizontal 3dB beam width (°)
90
70
Vertical 3dB beam width (°)
8
5.6
16.2
17.0
65
63
19.9
21.7
65
65
20.2
22.0
26
18
19.4
/
31
/
Gain (dBi)
Single column beam
LTE 65° Broadcast
beam
NR Broadcast beam
3300 - 3800
Gain (dBi)
Horizontal 3dB beam width (°)
Gain (dBi)
Horizontal 3dB beam width (°)
0° direct beam gain(dBi)
Service beam
0° direction beam horizontal
3dB beam width(°)
Soft split
multi-beam
Gain (dBi)
Horizontal 3dB beam width (°)
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2099 x 499 x 206
Antenna net weight (kg)
48
Mechanical downtilt (°)
0 - 12
Connector
12 x 4.3-10 Female
2x MQ4 Male+2x MQ5 Male
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
388
Product
List
Product
Category
B. Passive Antenna
TDD Antenna
3dB
Electrical
Frequency Range Horizontal
Gain (dBi) Downtilt Tilt Method
(MHz)
Beam Width
(o)
(o)
Connector
Dimension(mm)
Model
Page
2300-2690
90
16i
2-12
Smart 8T8R
1 x MQ4 Male +
1445 x 299 x 109
1 x MQ5 Male
ATD4516R5v07
390
3300-3800
75
15.5i
2–12
Smart 8T8R
1 x MQ4 Male +
1100 x 259 x 135
1 x MQ5 Male
ATD4516R8v07
395
2300-2690/
3300-3800
65/65
17i/
16i
2–12/
2-12
EasyRET2.0
2 x MQ4 Male +
1499 x 469 x 206
2 x MQ5 Male
ATD4516R9v07
400
4x(2545-2645)/
4x(3400-3600)/
4x(3600-5000)
3x65
21i/
22i/
22i
5–15/
5–15/
5-15
EasyRET2.0
3 x MQ4 Male +
3 x MQ5 Male
*CTD4522R01v06
405
2300-2400
2490-2690
65/65
17i/
17.5i
2-12 /
2-12
EasyRET2.0
2 x MQ4 Male +
1445 x 299 x 109
2 x MQ5 Male
ATD4518R00v07
408
3300-3800
75
16i
2–12
EasyRET2.0
9 x 4.3-10
Female
1100 x 259 x 135
ATD4516R8v08
412
3dB
Electrical
Frequency Range Horizontal
Gain (dBi) Downtilt Tilt Method
(MHz)
Beam Width
(o)
(o)
Connector
Dimension(mm)
Model
Page
1 x MQ4 Male +
1 x MQ5 Male
1509 x 499 x 206
A04040PD00v06
416
2099 x 499 x 206
A06240PD00v06
420
Connector
Dimension(mm)
Model
Page
Φ330 x 982
SDA
2300-2690
18|65
22i|17.5i
2 - 12
EasyRET2.0
2x690-960/
4x1710-2690
2x65/
4x(33|65)
2x15.5i/
(18i|15.5i)
2- 12/
2- 12
EasyRET2.0 5 x 4.3-10 Female
2 x MQ4 Male +
Cluster Antenna
3dB
Electrical
Frequency Range Horizontal
Gain (dBi) Downtilt Tilt Method
(MHz)
Beam Width
(o)
(o)
698-960/
1710-2690/
1710-2690
1710-2690/
1710-2690
65/65/65
14.5i/
17.5i/
17.5i
0 – 10/
0 – 10/ EasyRET2.0
0 - 10
3 x 6 x 4.3-10
Female
1360 x Φ450
1595 x Φ450 (With
Maintenance
Cabinet)
ATR4518S2v06
425
65/65
14i/
14i
2 – 12/
EasyRET2.0
2 – 12
3 x 4 x 4.3-10
Female
1310 x Φ160
1595 x Φ160 (With
Maintenance
Cabinet)
ADU4514S0v06
428
* Preliminary Issue
389
Product
Category
ATD4516R5v07
DX-2300-2690-90-16i-M-R
Antenna Specifications
General Electrical Properties
2300 - 2400
Frequency range (MHz)
Polarization
General
parameters
2496 - 2690
+45° , -45°
Electrical downtilt (°)
2 - 12 , continuously adjustable
Electrical downtilt tolerance (°)
±1
Maximum effective power per port (W)
60 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each antenna port (dB)
Calibration
and
electrical
parameters
-26 ±2
Max. amplitude tolerance from calibration port to input ports (dB)
0.7
Max. phase tolerance from calibration port to input ports (°)
5
Ports VSWR
1.5
Co-polarization isolation between ports (dB)
≥ 20 @ 2°Electrical downtilt ;
≥ 25 @ 3°- 6° Electrical downtilt;
≥ 28 @ 7°- 12°Electrical downtilt;
Cross-polarization isolation between ports (dB)
≥ 25 @ 2°Electrical downtilt;
≥ 28 @ 3°- 6°Electrical downtilt;
≥ 30 @ 7°- 12°Electrical downtilt
* Maximum effective power whole antenna : 480W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
2300 - 2400
2496 - 2690
Gain (dBi)
16
17
Horizontal 3dB beam width (°)
90
75
Front to back ratio (dB)
≥ 28
≥ 27
Cross polar ratio (0°) (dB)
≥ 20
≥ 20
6.5
5.7
Side lobe suppression for first side lobe above main beam (dB)
≥ 18
≥ 18
Gain (dBi)
17.5
18
Frequency range (MHz)
Single column
beam
Vertical 3dB beam width (°)
Horizontal 3dB beam width (°)
Radiation
parameters
65° Broadcast
beam
65
65
Front to back ratio (dB)
≥ 30
≥ 30
Cross polar ratio (0°) (dB)
≥ 22
≥ 22
6.5
5.7
≥ 18
≥ 18
Vertical 3dB beam width (°)
Side lobe suppression for first side lobe above main beam (dB)
0° direct beam gain (dBi)
Service beam
Soft split
multi-beam
21
22
0° direction beam horizontal 3dB beam width (°)
25.5
23
0° direction beam cross polar ratio (0°) (dB)
≥ 22
≥ 22
0° direction beam front to back ratio (dB)
≥ 30
≥ 30
Gain (dBi)
20.5
21.5
30
27
Front to back ratio (dB)
≥ 30
≥ 30
Cross polar ratio at boresight (dB)
≥ 18
≥ 18
Horizontal 3dB beam width (°)
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
390
Product
List
Product
Category
ATD4516R5v07
DX-2300-2690-90-16i-M-R
5G NR Electrical Properties
2300 - 2400
2496 - 2690
Gain (dBi)
16
17
Horizontal 3dB beam width (°)
90
75
Front to back ratio (dB)
≥ 28
≥ 27
Cross polar ratio (0°) (dB)
≥ 20
≥ 20
Frequency range (MHz)
Single column
beam
Vertical 3dB beam width (°)
Radiation
parameters
NR Broadcast
beam
6.5
5.7
Side lobe suppression for first side lobe above main beam (dB)
≥ 18
≥ 18
Gain (dBi)
20.8
21.8
65
65
≥ 30
≥ 30
6.5
5.7
≥ 18
≥ 18
21
22
0°direction beam horizontal 3dB beam width (°)
25.5
23
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (0°) (dB)
≥ 22
≥ 22
Horizontal 3dB beam width (°)
Front to back ratio (dB)
Vertical 3dB beam width (°)
Side lobe suppression for first side lobe above main beam (dB)
0°direct beam gain (dBi)
NR Service
beam
Mechanical Properties
Distance between columns (mm)
68
62
Antenna dimensions (H x W x D) (mm)
1445 x 299 x 109
Packing dimensions (H x W x D) (mm)
1770 x 350 x 180
Antenna weight (kg)
16.0
Clamps weight (kg)
3.3 (2 units)
Antenna packing weight (kg)
(58)
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
23.2 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1331
50 - 115
1445
Mast diameter supported (mm)
Frontal:
410 (at 150 km/h)
Lateral:
140 (at 150 km/h)
Maximum: 470 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
56
1 x MQ4 Male + 1 x MQ5 Male
Connector position
Bottom
Accessories
Item
Model
Description
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
Weight Units per antenna
1.3 kg
391
1 (Separate packing)
Product
List
Product
Category
ATD4516R5v07
DX-2300-2690-90-16i-M-R
RET S/N:
HWMxxx….y1
RAE S/N:
HWXxxx…..y1
L CL CR R
y1 y1 y1 y1
MQ5-4
y1.L+
MQ5-3
y1.CL+
MQ5-2
y1. CR+
MQ5-1
y1.R+
MQ4-4
y1.L-
MQ4-3
y1.CL-
MQ4-2
y1. CR-
MQ4-1
y1.R-
y - Yellow
392
Product
List
Product
Category
ATD4516R5v07
DX-2300-2690-90-16i-M-R
Pattern sample for reference
Single column
65°Broadcast
NR Broadcast
Service 0°
Multi-Beam-30°
Multi-Beam+30°
393
Product
List
Product
Category
ATD4516R5v07
DX-2300-2690-90-16i-M-R
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 1 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30
Calibration channel integrate the Bias-T and supporting OOK modulation signal
communication
RET interface 1 (RF feeder)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET interface 2 (485 connector)
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Lightning protection (kA)
10 (8/20 μs)
RAE Properties
RAE type
Integrated RAE, manages antenna information
RAE protocols
AISG-ES-RAE V2.1.0
EasyBeam Properties
Frequency range (MHz)
2300 - 2400
2496 - 2690
2 - 12
Electrical downtilt (°)
Horizontal 3dB beam
width (°)
Broadca
st beam Electrical azimuth (°)
Electrical azimuth step(°)
30
65
90
30
65
90
-15..+15
0
-15..+15
0
1
/
1
/
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
394
Product
List
Product
Category
ATD4516R8v07
DX-3300-3800-75-15.5i-M-R
Antenna Specifications
General Electrical Properties
Frequency range (MHz)
3300 - 3800
Polarization
General
parameters
+45° , -45°
2 – 12, continuously adjustable
Electrical downtilt (°)
Electrical downtilt tolerance (°)
±1
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each antenna port (dB)
Calibration
and
electrical
parameters
-26 ±2
Max. amplitude tolerance from calibration port to input ports (dB)
0.9
Max. phase tolerance from calibration port to input ports (°)
7
Ports VSWR
1.5
Co-polarization isolation between ports (dB)
≥ 20
Cross-polarization isolation between ports (dB)
≥ 25
* Max. effective power whole antenna (W): 320W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
Frequency range (MHz)
3300 - 3800
15.5
Gain (dBi)
78
Horizontal 3dB beam width (°)
Single
column
beam
Front to back ratio (dB)
≥ 23
Cross polar ratio (0°) (dB)
≥ 18
5.5
Vertical 3dB beam width (°)
Side lobe suppression for first side lobe above main beam
(dB)
≥ 15
17
Gain (dBi)
65
Horizontal 3dB beam width (°)
Radiation
parameters
65°
Broadcast
beam
Front to back ratio (dB)
≥ 25
Cross polar ratio (0°) (dB)
≥ 22
5.5
Vertical 3dB beam width (°)
Side lobe suppression for first side lobe above main beam
(dB)
Service
beam
≥ 15
0° direct beam gain (dBi)
21
0° direction beam horizontal 3dB beam width (°)
26
0° direction beam front to back ratio (dB)
≥ 28
0° direction beam cross polar ratio (0°) (dB)
≥ 22
Gain (dBi)
20
Horizontal 3dB beam width (°)
Soft split
multi-beam Front to back ratio (dB)
30
≥ 25
Cross polar ratio at boresight (dB)
≥ 18
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
395
Product
List
Product
Category
ATD4516R8v07
DX-3300-3800-75-15.5i-M-R
5G NR Electrical Properties
Frequency range (MHz)
3300 - 3800
Gain (dBi)
15.5
78
Horizontal 3dB beam width (°)
Single column beam
Front to back ratio (dB)
≥ 23
Cross polar ratio (0°) (dB)
≥ 18
5.5
Vertical 3dB beam width (°)
Radiation
parameters
Side lobe suppression for first side lobe above main beam
(dB)
≥ 15
Gain (dBi)
20.7
65
Horizontal 3dB beam width (°)
≥ 25
Front to back ratio (dB)
NR Broadcast beam
NR Service beam
Vertical 3dB beam width (°)
5.5
Side lobe suppression for first side lobe above main
beam (dB)
≥ 15
0°direct beam gain (dBi)
21
0°direction beam horizontal 3dB beam width (°)
26
0°direction beam front to back ratio (dB)
≥ 28
0°direction beam cross polar ratio (0°) (dB)
≥ 22
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
Mechanical Properties
43
Antenna dimensions (H x W x D) (mm)
1100 x 259 x 135
Packing dimensions (H x W x D) (mm)
1290 x 340 x 205
Antenna weight (kg)
13.0
Clamps weight (kg)
3.3 (2 units)
Antenna packing weight (kg)
68
(281)
Distance between columns (mm)
20.4 (Included clamps)
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1100
Radome material
770
50 - 115
Mast diameter supported (mm)
Frontal:
285 (at 150 km/h)
Lateral:
215 (at 150 km/h)
Maximum: 435 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
1 x MQ4 Male + 1 x MQ5 Male
Connector position
49
Connector
Bottom
Accessories
Item
Model
Description
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16°
Weight Units per antenna
1.3 kg
396
1 (Separate packing)
Product
List
Product
Category
ATD4516R8v07
DX-3300-3800-75-15.5i-M-R
Pattern sample for reference
Single column
65° Broadcast
5G NR Broadcast
Service 0°
Multi-Beam -30°
Multi-Beam +30°
397
Product
List
Product
Category
ATD4516R8v07
DX-3300-3800-75-15.5i-M-R
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 1 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30
Calibration channel integrate the Bias-T and supporting OOK modulation signal
communication
RET interface 1 (RF feeder)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET interface 2 (485 connector)
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Lightning protection (kA)
5 (8/20 μs)
RAE Properties
RAE type
Integrated RAE, manages antenna information
RAE protocols
AISG-ES-RAE V2.1.0
EasyBeam Properties
Frequency range (MHz)
3300 - 3800
2 - 12
Electrical downtilt (°)
Horizontal 3dB beam
width (°)
Broadca
st beam Electrical azimuth (°)
30
65
90
-15..+15
0
1
/
Electrical azimuth step(°)
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
398
Product
List
Product
Category
ATD4516R8v07
DX-3300-3800-75-15.5i-M-R
RET S/N:
HWMxxx….p1
RAE S/N:
HWXxxx…...p1
L CL CR R
p1
p1 p1
p - Purple
p1
MQ5-4
p1.L+
MQ5-3
p1.CL+
MQ5-2
p1.CR+
MQ5-1
p1.R+
MQ4-4
p1.L-
MQ4-3
p1.CL-
MQ4-2
p1.CR-
MQ4-1
p1.R-
Physical array & port mapping according to AISG naming convention:
Left - Center Left - Center Right - Right (seen from front of antenna)
399
Product
List
Product
Category
ATD4516R9v07
DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R
Antenna Specifications
General Electrical Properties
Frequency range (MHz)
2300 – 2690 (y1)
Polarization
+45° , -45°
+45° , -45°
2 - 12, continuously adjustable
2 - 12, continuously adjustable
±1
±1
50 (at 50℃ ambient
temperature)*
50 (at 50℃ ambient
temperature)*
50
50
DC Ground
DC Ground
-26 ±2
-26 ±2
0.7
0.9
5
7
1.5
1.5
Co-polarization isolation between ports (dB)
≥ 20
≥ 20
Cross-polarization isolation between ports (dB)
≥ 23
≥ 23
Electrical downtilt (°)
General
parameters
Electrical downtilt tolerance (°)
Max. effective power per port (W)
Impedance (Ω)
Grounding
Coupling factor between calibration port and
each antenna port (dB)
Calibration
and
electrical
parameters
3300 – 3800 (p1)
Max. amplitude tolerance from calibration
port to input ports (dB)
Max. phase tolerance from calibration port to
input ports (°)
Ports VSWR
* Max. effective power whole antenna (W): 640W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
Frequency range (MHz)
Single
column
beam
2300 – 2690 (y1)
3300 – 3800 (p1)
Gain (dBi)
16
16.5
Horizontal 3dB beam width (°)
90
75
Front to back ratio (dB)
≥ 25
≥ 25
Cross polar ratio (0°) (dB)
≥ 19
≥ 17
5.8
5.2
Side lobe suppression for first side
lobe above main beam (dB)
≥ 15
≥ 15
Gain (dBi)
17.5
17.5
Vertical 3dB beam width (°)
65
65
Front to back ratio (dB)
≥ 28
≥ 25
Cross polar ratio (0°) (dB)
≥ 17
≥ 19
5.8
5.2
Side lobe suppression for first side
lobe above main beam (dB)
≥ 15
≥ 15
0° direct beam gain (dBi)
21.5
21
23
24
0° direction beam front to back
ratio (dB)
≥ 30
≥ 30
0° direction beam cross polar
ratio (0°) (dB)
≥ 22
≥ 19
Gain (dBi)
20.5
/
28
/
≥ 30
/
Horizontal 3dB beam width (°)
Radiation
parameters
65°
Broadcast
beam
Service
beam
Vertical 3dB beam width (°)
0° direction beam horizontal 3dB
beam width (°)
Horizontal 3dB beam width (°)
Soft split
multi-beam Front to back ratio (dB)
Cross polar ratio at boresight (dB)
≥ 18
/
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
400
Product
List
Product
Category
ATD4516R9v07
DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R
5G NR Electrical Properties
Frequency range (MHz)
2300 – 2690 (y1)
3300 – 3800 (p1)
16.0
16.5
Gain (dBi)
90
75
Front to back ratio (dB)
≥ 25
≥ 25
Cross polar ratio (0°) (dB)
≥ 19
17
5.8
5.2
Side lobe suppression for first side lobe above
main beam (dB)
≥ 15
≥ 15
Gain (dBi)
21.2
20.7
Horizontal 3dB beam width (°)
Single column
beam
Vertical 3dB beam width (°)
Radiation
parameters
Horizontal 3dB beam width (°)
NR Broadcast
beam
Front to back ratio (dB)
65
≥ 25
5.8
5.2
Side lobe suppression for first side lobe above main
beam (dB)
≥ 15
≥ 15
0°direct beam gain (dBi)
21.5
21
23
24
0°direction beam front to back ratio (dB)
≥ 30
≥ 30
0°direction beam cross polar ratio (0°) (dB)
≥ 22
19
Vertical 3dB beam width (°)
NR Service beam
65
≥ 25
0°direction beam horizontal 3dB beam width (°)
Mechanical Properties
68
43 / 62
Distance between columns (mm)
Antenna dimensions (H x W x D) (mm)
1499 x 469 x 206
Packing dimensions (H x W x D) (mm)
1870 x 535 x 285
Antenna weight (kg)
31.5
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(59)
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
49.5 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1383
1499
50 - 115
Mast diameter supported (mm)
Frontal:
440 (at 150 km/h)
Lateral:
265 (at 150 km/h)
Maximum: 585 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
250
Connector
57
Survival wind speed (km/h)
2 x MQ4 Male + 2 x MQ5 Male
Connector position
Unit: mm
Bottom
Accessories
Item
Model
Description
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 16°
Weight Units per antenna
3.1 kg
401
1 (Separate packing)
Product
List
Product
Category
ATD4516R9v07
DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R
Single column
(2300 - 2690 MHz)
Single column
(3300 - 3800 MHz)
65° Broadcast
(2300 - 2690 MHz)
65° Broadcast
(3300 - 3800 MHz)
Service 0°
(2300 - 2690 MHz)
Service 0°
(3300 - 3800 MHz)
Multi-Beam-30°
(2300 - 2690 MHz)
Multi-Beam+30°
(2300 - 2690 MHz)
402
5G NR Broadcast
Product
List
Product
Category
ATD4516R9v07
DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
< 1.5 (when the motor does not work, 12 V)
< 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Power consumption (W)
Adjustment time (full range) (s)
Typ. 40
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
EasyBeam Properties
Frequency range (MHz)
2300 - 2690
3300 - 3800
2 - 12
2 - 12
Electrical downtilt (°)
Horizontal 3dB beam
width (°)
Broadca
st beam Electrical azimuth (°)
Electrical azimuth step(°)
30
65
90
30
65
90
-15..+15
0
-15..+15
0
1
/
1
/
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
403
Product
List
Product
Category
ATD4516R9v07
DXX-2300-2690/3300-3800-65/65-17i/16i-M/M-R
RET S/N:
HWMxxx….y1
HWXxxx…..y1
HWMxxx….p1
HWXxxx…..p1
L CL CR R
y1 y1 y1
y1
y - Yellow
p - Purple
p1 p1 p1 p1
RAE S/N:
L CL CR R
MQ5-1
y1.R+
MQ5-1
p1.R+
MQ4-1
y1.R-
MQ4-1
p1.R-
MQ5-2
y1.CR+
MQ5-2
p1.CR+
MQ4-2
y1.CR-
MQ4-2
p1.CR-
MQ5-3
y1.CL+
MQ5-3
p1.CL+
MQ4-3
y1.CL-
MQ4-3
p1.CL-
MQ5-4
y1.L+
MQ5-4
p1.L+
MQ4-4
y1.L-
MQ4-4
p1.L-
Physical array & port mapping according to AISG naming convention:
Left - Center Left - Center Right - Right (seen from front of antenna)
404
Product
List
Product
Category
CTD4522R01v06
CP12X-4x2545-2645/4x3400-3600/4x3600-5000-3x65-21i/22i/22i3xM-R EasyRET 24-port 2.5-2.6 & 3.4-3.6 & 3.6-5.0GHz 8T8R TDD
Antenna with 3 integrated RCUs - 1.0m
Preliminary Issue
General Electrical Properties
Frequency range (MHz)
2545 - 2645 (y1)
3400 - 3600 (p1)
Polarization
General
parameter
s
3600 - 5000 (p2)
+45° , -45°
5 - 15, continuously adjustable, each band separately
Electrical downtilt (°)
Electrical downtilt tolerance (°)
±1
Avg. power capacity (W)*
40
Impedance (Ω)
50
Grounding
DC Ground
* Total power : 720 W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
Single
column
beam
Radiation
parameters
3400 - 3600
(p1)
3600 - 4100
4500 - 5000
Gain (dBi)
16
16.3
16.5
16.8
Horizontal 3dB beam width (°)
77
77
76
67
Front to back ratio (dB)
≥ 22
≥ 22
≥ 22
≥ 22
Cross polar ratio (0°) (dB)
≥ 17
≥ 15
≥ 15
≥ 15
6.7
5.4
5
4
Side lobe suppression for
first side lobe above main
beam (dB)
≥ 15
≥ 15
≥ 15
≥ 15
Gain (dBi)
16.5
16.7
16.8
16.7
65
65
65
65
Front to back ratio (dB)
≥ 22
≥ 22
≥ 22
≥ 22
Cross polar ratio (0°) (dB)
≥ 17
≥ 15
≥ 15
≥ 15
6.7
5.4
5
4
Side lobe suppression for
first side lobe above main
beam (dB)
≥ 15
≥ 15
≥ 15
≥ 15
0°direct beam gain (dBi)
21.3
22.3
22.3
22.6
0°direction beam horizontal
3dB beam width (°)
19.5
15
13.5
11
0°direction beam front to
back ratio (dB)
≥ 25
≥ 25
≥ 25
≥ 25
0°direction beam cross
polar ratio (dB)
≥ 17
≥ 15
≥ 15
≥ 15
Vertical 3dB beam width (°)
Horizontal 3dB beam width (°)
65°
Broadcast
beam
Service
beam
3600 - 5000 (p2)
2545 - 2645 (y1)
Frequency range (MHz)
Vertical 3dB beam width (°)
405
Product
List
Product
Category
CTD4522R01v06
CP12X-4x2545-2645/4x3400-3600/4x3600-5000-3x65-21i/22i/22i3xM-R EasyRET 24-port 2.5-2.6 & 3.4-3.6 & 3.6-5.0GHz 8T8R TDD
Antenna with 3 integrated RCUs - 1.0m
Preliminary Issue
5G NR Electrical Properties
3400- 3600
(p1)
3600 - 4100
4500 - 5000
Gain (dBi)
16
16.3
16.5
16.8
Horizontal 3dB beam width (°)
77
77
76
67
Front to back ratio (dB)
≥ 22
≥ 22
≥ 22
≥ 22
Cross polar ratio (0°) (dB)
≥ 17
≥ 15
≥ 15
≥ 15
6.7
5.4
5
4
Side lobe suppression for first side
lobe above main beam (dB)
≥ 15
≥ 15
≥ 15
≥ 15
Gain (dBi)
21.1
22.1
22.1
22.4
65
65
65
60
≥ 22
≥ 22
≥ 22
≥ 22
Vertical 3dB beam width (°)
Radiation
parameters
NR Broadcast
beam
(PBCH/PSCH/
SSCH with
HUAWEI
gNodeB)
NR Service
beam
Horizontal 3dB beam width (°)
Front to back ratio (dB)
6.7
5.4
5
4
Side lobe suppression for first side
lobe above main beam (dB)
≥ 15
≥ 15
≥ 15
≥ 15
0°direct beam gain (dBi)
21.3
22.3
22.3
22.6
0°direction beam horizontal 3dB
beam width (°)
19.5
15
13.5
11
0°direction beam front to back
ratio (dB)
≥ 25
≥ 25
≥ 25
≥ 25
0°direction beam cross polar
ratio (dB)
≥ 17
≥ 15
≥ 15
≥ 15
Vertical 3dB beam width (°)
Distance between TDD columns (mm)
66
Mechanical Properties
74 @2545-2645
74 @3400-3600
74 @3600-5000
Antenna dimensions (H x W x D) (mm)
Φ330 x 982
Packing dimensions (H x W x D) (mm)
1320 x 475 x 465
Antenna weight (kg)
22.4
30.5 (Included clamps)
Mast diameter supported (mm)
851
Antenna packing weight (kg)
982
Single
column
beam
3600 - 5000 (p2)
2545 - 2645
(y1)
Frequency range (MHz)
50 - 115
Radome material
GFRPP
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
3 x MQ4 Male + 3 x MQ5 Male
Connector position
Φ330
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit ASMEK0002 Mechanical downtilt: 0 - 15 ° 13.8 kg 1 (With clamp, Separate packing)
406
Product
List
Product
Category
CTD4522R01v06
CP12X-4x2545-2645/4x3400-3600/4x3600-5000-3x65-21i/22i/22i3xM-R EasyRET 24-port 2.5-2.6 & 3.4-3.6 & 3.6-5.0GHz 8T8R TDD
Antenna with 3 integrated RCUs - 1.0m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
< 1.5 (when the motor does not work, 12 V)
< 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Power consumption (W)
Adjustment time (full range) (s)
Typ. 40
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Lightning protection (kA)
10 (8/20 μs)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
407
Product
List
Product
Category
ATD4518R00v07
DXX-2300-2400/2490-2690-65/65-17i/17.5i-M/M-R
Antenna Specifications
General Electrical Properties
Frequency range (MHz)
2300 - 2400 (y1)
2490 - 2690 (y2)
+45° , -45°
+45° , -45°
2 - 12 , continuously
adjustable
2 - 12 , continuously
adjustable
±1
±1
50 (at 50℃ ambient
temperature)*
50 (at 50℃ ambient
temperature)*
Polarization
Electrical downtilt (°)
General
parameters
Electrical downtilt tolerance (°)
Max. power per input (W)
Impedance (Ω)
Grounding
Coupling factor between calibration port and each antenna
port (dB)
Calibration
and
electrical
parameters
Max. amplitude tolerance from calibration port to each
antenna channel (dB)
Max. phase tolerance from calibration port to input ports (°)
50
DC Ground
-26 ±2
-26 ±2
0.7
0.7
5
5
1.5
1.5
Co-polarization isolation between ports (dB)
≥ 20
≥ 20
Cross-polarization isolation between ports (dB)
≥ 25
≥ 25
≥ 25
≥ 25
Ports VSWR
Intraband
isolation
50
DC Ground
Interband isolation (dB)
* Total power : 700W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
Frequency range (MHz)
Gain (dBi)
Horizontal 3dB beam width (°)
Single column
beam
90
75
≥ 27
Cross polar ratio (0°) (dB)
≥ 20
≥ 20
6.5
5.7
Side lobe suppression for first side lobe
above main beam (dB)
≥ 18
≥ 18
Gain (dBi)
17.0
17.5
65
65
Front to back ratio (dB)
≥ 30
≥ 30
Cross polar ratio (0°) (dB)
≥ 22
≥ 22
Vertical 3dB beam width (°)
Service beam
Soft split
multi-beam
16.5
≥ 28
Horizontal 3dB beam width (°)
65° Broadcast
beam
2490 - 2690 (y2)
15.5
Front to back ratio (dB)
Vertical 3dB beam width (°)
Radiation
parameters
2300 - 2400 (y1)
6.5
5.7
Side lobe suppression for first side lobe
above main beam (dB)
≥ 18
≥ 18
0° direct beam gain (dBi)
20.5
21.5
0° direction beam horizontal 3dB beam
width (°)
25.5
23
0° direction beam cross polar ratio (0°) (dB)
≥ 22
≥ 22
0° direction beam front to back ratio (dB)
≥ 30
≥ 30
Gain (dBi)
20.0
21.0
30
27
Front to back ratio (dB)
≥ 30
≥ 30
Cross polar ratio at boresight (dB)
≥ 18
≥ 18
Horizontal 3dB beam width (°)
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
408
Product
List
Product
Category
ATD4518R00v07
Mechanical Properties
Distance between columns (mm)
68
62
Antenna dimensions (H x W x D) (mm)
1445 x 299 x 109
Packing dimensions (H x W x D) (mm)
1770 x 350 x 180
Antenna weight (kg)
17.0
Clamps weight (kg)
3.3 (2 units)
Antenna packing weight (kg)
(58)
DXX-2300-2400/2490-2690-65/65-17i/17.5i-M/M-R
24.2 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1331
50 - 115
1445
Mast diameter supported (mm)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
56
Frontal:
410 (at 150 km/h)
Lateral:
140 (at 150 km/h)
Maximum: 470 (at 150 km/h)
Wind load (N)
2 x MQ4 Male + 2 x MQ5 Male
Connector position
Bottom
Accessories
Item
Model
Description
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16 °
Weight Units per antenna
1.3 kg
1 (Separate packing)
RET S/N:
HWMxxx…..y1y2
RAE S/N:
HWXxxx…..y1
HWXxxx…..y2
y2
y2
y2
y2
y1
y1
y1
y1
y - Yellow
MQ5-4
y2.L+
MQ5-3
y2.CL+
MQ5-2
y2.CR+
MQ5-1
y2.R+
MQ4-4
y2.L-
MQ4-3
y2.CL-
MQ4-2
y2.CR-
MQ4-1
y2.R-
MQ5-4
y1.L+
MQ5-3
y1.CL+
MQ5-2
y1.CR+
MQ5-1
y1.R+
MQ4-4
y1.L-
MQ4-3
y1.CL-
MQ4-2
y1.CR-
MQ4-1
y1.R-
409
Product
List
Product
Category
ATD4518R00v07
DXX-2300-2400/2490-2690-65/65-17i/17.5i-M/M-R
Pattern sample for reference
Single column
(y1)
Single column
(y2)
65° Broadcast
(y1)
Service 0°
(y1)
65° Broadcast
(y2)
Service 0°
(y2)
Multi-Beam-30°
(y1)
Multi-Beam+30°
(y1)
Multi-Beam-30°
(y2)
Multi-Beam-30°
(y2)
410
Product
List
Product
Category
ATD4518R00v07
DXX-2300-2400/2490-2690-65/65-17i/17.5i-M/M-R
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 1 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30
Calibration channel integrate the Bias-T and supporting OOK modulation signal
communication
RET interface 1 (RF feeder)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET interface 2 (485 connector)
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Lightning protection (kA)
10 (8/20 μs)
RAE Properties
RAE type
Integrated RAE, manages antenna information
RAE protocols
AISG-ES-RAE V2.1.0
EasyBeam Properties
Frequency range (MHz)
2300 - 2400
2490 - 2690
2 - 12
Electrical downtilt (°)
Horizontal 3dB beam
width (°)
Broadca
st beam Electrical azimuth (°)
Electrical azimuth step(°)
30
65
90
30
65
90
-15..+15
0
-15..+15
0
1
/
1
/
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
411
Product
List
Product
Category
ATD4516R8v08
DX-3300-3800-75-15.5i-M-R
Antenna Specifications
General Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
Polarization
General
parameters
+45° , -45°
2 – 12, continuously adjustable
Electrical downtilt (°)
Electrical downtilt tolerance (°)
±1
Max. effective power per port (W)
50 (at 50℃ ambient temperature)*
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and
each antenna port (dB)
Calibration
and
electrical
parameters
-26 ±2
Max. amplitude tolerance from calibration
port to input ports (dB)
0.9
Max. phase tolerance from calibration port to
input ports (°)
7
Ports VSWR
1.5
Co-polarization isolation between ports (dB)
≥ 20
Cross-polarization isolation between ports (dB)
≥ 25
* Max. effective power whole antenna: 400W (at 50℃ ambient temperature)
TDD LTE Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
15.5
Gain (dBi)
78
Horizontal 3dB beam width (°)
Single
column
beam
Front to back ratio (dB)
≥ 23
Cross polar ratio (0°) (dB)
≥ 18
5.5
Vertical 3dB beam width (°)
Side lobe suppression for first side lobe above main beam (dB)
≥ 15
17
Gain (dBi)
65
Horizontal 3dB beam width (°)
Radiation
parameters
65°
Broadcast
beam
Front to back ratio (dB)
≥ 25
Cross polar ratio (0°) (dB)
≥ 22
5.5
Vertical 3dB beam width (°)
Side lobe suppression for first side lobe above main beam (dB)
≥ 15
21
0°direct beam gain (dBi)
Service
beam
26
0°direction beam horizontal 3dB beam width (°)
0°direction beam front to back ratio (dB)
≥ 28
0°direction beam cross polar ratio (0°) (dB)
≥ 22
Gain (dBi)
20
Horizontal 3dB beam width (°)
Soft split
multi-beam Front to back ratio (dB)
30
≥ 25
Cross polar ratio at boresight (dB)
≥ 18
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
412
Product
List
Product
Category
ATD4516R8v08
DX-3300-3800-75-15.5i-M-R
5G NR Electrical Properties
Frequency range (MHz)
3300 - 3800 (p1)
Gain (dBi)
15.5
78
Horizontal 3dB beam width (°)
Single column beam
Front to back ratio (dB)
≥ 23
Cross polar ratio (0°) (dB)
≥ 18
5.5
Vertical 3dB beam width (°)
Radiation
parameters
Side lobe suppression for first side lobe above main beam
(dB)
≥ 15
Gain (dBi)
20.7
NR Broadcast beam
Horizontal 3dB beam width (°)
(PBCH/PSCH/SSCH
Front to back ratio (dB)
with HUAWEI gNodeB)
Vertical 3dB beam width (°)
65
≥ 25
5.5
Side lobe suppression for first side lobe above main beam (dB)
21
0°direct beam gain (dBi)
26
0°direction beam horizontal 3dB beam width (°)
NR Service beam
≥ 15
0°direction beam front to back ratio (dB)
≥ 28
0°direction beam cross polar ratio (0°) (dB)
≥ 22
Notes:
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the
maximum gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.
Mechanical Properties
68
43
Antenna dimensions (H x W x D) (mm)
1100 x 259 x 135
Packing dimensions (H x W x D) (mm)
1290 x 340 x 205
Antenna weight (kg)
13.3
Clamps weight (kg)
3.3 (2 units)
Antenna packing weight (kg)
(281)
Distance between columns (mm)
20.7 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1100
50 - 115
770
Mast diameter supported (mm)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
49
Frontal:
285 (at 150 km/h)
Lateral:
215 (at 150 km/h)
Maximum: 435 (at 150 km/h)
Wind load (N)
9 x 4.3-10 Female
Connector position
Unit: mm
Bottom
Accessories
Item
Model
Description
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 16°
Weight Units per antenna
1.3 kg
413
1 (Separate packing)
Product
List
Product
Category
ATD4516R8v08
DX-3300-3800-75-15.5i-M-R
Pattern sample for reference
Single column
65° Broadcast
5G NR Broadcast
Service 0°
Multi-Beam -30°
Multi-Beam +30°
414
Product
List
Product
Category
ATD4516R8v08
DX-3300-3800-75-15.5i-M-R
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 1 (when the motor does not work, 12 V)
< 3.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30
Calibration channel integrate the Bias-T and supporting OOK modulation signal
communication
RET interface 1 (RF feeder)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET interface 2 (485 connector)
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
RAE Properties
RAE type
Integrated RAE, manages antenna information
RAE protocols
AISG-ES-RAE V2.1.0
EasyBeam Properties
Frequency range (MHz)
3300 - 3800
2 - 12
Electrical downtilt (°)
Horizontal 3dB beam width
(°)
Broadca
st beam Electrical azimuth (°)
30
65
90
-15..+15
0
1
/
Electrical azimuth step(°)
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
RET S/N:
HWMxxx….p1
RAE S/N:
HWXxxx….p1
p1.L
p1.CL
p1.CR
p1.R
p - Purple
415
Product
List
Product
Category
A04040PD00v06
D04X-4x2300-2690-18|65-22i|17.5i-M-R Sector Reconfigurable
Software Defined Antenna with 1 Integrated RCU - 1.5m
Antenna Specifications
With HUAWEI SRAN16.1 and later, this antenna can be worked as adaptive scenario-based beam.
Scenario-based beam 1 and Scenario-based beam 2 can be worked simultaneously.
Electrical Properties - Scenario-based Beam 1 (RAT: TDD-LTE)
2300 - 2690 (y1)
Sub-beam0
Sub-beam1
Sub-beam2
Sub-beam3
2300 2490 2300 2490 2300 2490 2300 2490 2400
2690
2400
2690
2400
2690
2400
2690
20.5
21.5
22.0
22.5
22.0
22.5
20.5
21.5
20.3 ±0.5 21.3 ±0.7 21.9 ±0.5 22.4 ±0.7 21.9 ±0.5 22.4 ±0.7 20.3 ±0.5 21.3 ±0.7
Frequency range (MHz)
at mid Tilt
over all Tilts
Side lobe suppression for first
> 15
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
23 ±2
19 ±2
Vertical 3dB beam width (°)
6.3 ±0.5 5.8 ±0.5
-45
Horizontal beam centers (°)
Cross polar isolation (dB)
Front to back ratio total, ±30°
> 30
(dB)
Cross polar ratio at boresight (dB)
> 15
Gain (dBi)
> 15
> 15
> 15
17 ±2
15 ±2
17 ±2
15 ±2
6.4 ±0.5 5.8 ±0.5 6.4 ±0.5 5.8 ±0.5
-15
15
≥ 25
23 ±2
6.3 ±0.5
19 ±2
5.8 ±0.5
45
> 30
> 30
> 30
> 15
> 15
> 15
Electrical Properties - Scenario-based Beam 2 (RAT: TDD-LTE)
2300 - 2690 (y1)
Frequency range (MHz)
Gain (dBi)
Radiation
parameters
2490 - 2690
16.8
17.4
Horizontal 10dB beam width (°)
135
125
Front to back ratio (dB)
> 30
> 30
> 15
> 15
Broadcast beam Cross polar ratio (0°) (dB)
6.4
5.8
Side lobe suppression for first side lobe above main beam
(dB)
> 15
> 15
Gain (dBi)
22.0
22.5
17
15
Vertical 3dB beam width (°)
Service beam
2300 - 2400
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
Front to back ratio (dB)
6.4
5.8
> 30
> 30
General Electrical Properties
Frequency range (MHz)
2300 - 2690 (y1)
Polarization
General
parameters
+45° , -45°
2 - 12, continuously adjustable
Electrical downtilt (°)
±1
Electrical downtilt tolerance (°)
Max. effective power per port (W)
50 (at 50℃ ambient temperature)
Impedance (Ω)
50
Grounding
Calibration
and
electrical
parameters
DC Ground
Coupling factor between calibration port and each antenna port
(dB)
-26 ±2
Max. amplitude tolerance from calibration port to input ports (dB)
0.7
Max. phase tolerance from calibration port to input ports (°)
6
Ports VSWR
1.
2.
1.5
Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
Electrical datasheet in XML format is available.
416
Product
List
Product
Category
A04040PD00v06
D04X-4x2300-2690-18|65-22i|17.5i-M-R Sector Reconfigurable
Software Defined Antenna with 1 Integrated RCU - 1.5m
Mechanical Properties
1509 x 499 x 206
Packing dimensions (H x W x D)
(mm)
1770 x 555 x 245
Antenna weight (kg)
24.5
Clamps weight (kg)
4.2 (2 units)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1509
35.6 (Included clamps)
Mast diameter supported (mm)
1310
Antenna packing weight (kg)
68
(137)
Antenna dimensions (H x W x D)
(mm)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
62
Frontal:
540 (at 150 km/h)
Lateral:
270 (at 150 km/h)
Maximum: 705 (at 150 km/h)
Wind load (N)
1 x MQ4 Male + 1 x MQ5 Male
Connector position
Unit: mm
Bottom
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Model
Description
Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 16°
Weight Units per antenna
2.1 kg
1 (Separate packing)
RET S/N:
HWMxxx……y1
RAE S/N:
HWXxxx……y1
y1
y1 y1 y1
y - Yellow
417
Product
List
Product
Category
A04040PD00v06
D04X-4x2300-2690-18|65-22i|17.5i-M-R Sector Reconfigurable
Software Defined Antenna with 1 Integrated RCU - 1.5m
Pattern sample for reference
Scenario-based Beam 1
Sub-beam0
(2300 - 2690 MHz)
Sub-beam1
(2300 - 2690 MHz)
Sub-beam2
(2300 - 2690 MHz)
Sub-beam3
(2300 - 2690 MHz)
Scenario-based Beam 2
Service beam
(2300 - 2690 MHz)
Broadcast beam
(2300 - 2690 MHz)
418
Product
List
Product
Category
A04040PD00v06
D04X-4x2300-2690-18|65-22i|17.5i-M-R Sector Reconfigurable
Software Defined Antenna with 1 Integrated RCU - 1.5m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 1 (when the motor does not work, 12 V)
< 3.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12V)
Adjustment time (full range) (s)
Typ. 30 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC,IC, RCM, RoHS, REACH, WEEE
419
Product
List
Product
Category
A06240PD00v06
D06X-2x(690-960)/4x(1695-2690)-2x65/(33|65)-2x15.5i/(18i|15.5i)6xM-R Sector Reconfigurable Software Defined Antenna with 4
Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
880 - 960
+45° , -45°
2- 12, continuously adjustable , each band separately
Electrical downtilt (°)
Gain (dBi)
824 - 894
at mid Tilt
14.8
15.0
15.1
15.3
over all Tilts
14.7 ±0.5
14.8 ±0.4
15.0 ±0.4
15.2 ±0.4
15
15
15
15
70 ±6
67 ±6
68 ±5
69 ±5
11 ±0.9
9.9 ±0.7
9.7 ±0.6
8.9 ±0.5
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation (dB)
≥ 25
Front to back ratio total, ±30°
(dB)
> 23
> 24
> 24
> 24
Cross polar ratio at boresight
(dB)
> 20
> 20
> 20
> 20
Max. effective power per port
(W)
400 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties - General Electrical Properties
Frequency range (MHz)
1695 – 2690 (By1/Ty2)
Polarization
+45° , -45°
2 - 12, continuously adjustable
Electrical downtilt (°)
General
parameters
Electrical downtilt tolerance (°)
±1
Ports VSWR
1.5
120 (at 50℃ ambient
temperature)
Max. effective power per port (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Coupling factor between calibration port and each antenna port (dB)
Calibration and
electrical
parameters
-30 ±2
Max. amplitude tolerance from calibration port to input ports (dB)
1
Max. phase tolerance from calibration port to input ports (°)
6
Co-polarization isolation between ports (dB)
≥ 15
Cross-polarization isolation between ports (dB)
≥ 25
* Max. effective power whole antenna : 920 W (at 50℃ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
420
Product
List
Product
Category
A06240PD00v06
D06X-2x(690-960)/4x(1695-2690)-2x65/(33|65)-2x15.5i/(18i|15.5i)6xM-RSector Reconfigurable Software Defined Antenna with 4
Integrated RCUs - 2.0m
With HUAWEI SRAN16.1 and later, this antenna can be worked as adaptive scenario-based beam.
Scenario-based beam 1 and Scenario-based beam 2 can be worked simultaneously.
Electrical Properties - Scenario-based Beam 1 (RAT: FDD-LTE)
1695 – 2690 (By1/Ty2)
1695 1990
Frequency range (MHz)
1920 2200
2200 2490
2490 2690
1695 1990
1920 2200
Sub-beam1
2490 2690
Sub-beam2
2 – 12, continuously adjustable
Electrical downtilt (°)
Gain (dBi)
2200 2490
at mid Tilt
over all Tilts
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
17.1
17.8
17.8
17.6
17.1
17.8
17.8
17.6
16.9 ±1.0 17.5 ±0.9 17.6 ±0.9 17.1 ±1.0 16.9 ±1.0 17.5 ±0.9 17.6 ±0.9 17.1 ±1.0
15
15
15
15
15
15
15
15
36 ±3
34 ±3
34 ±3
31 ±3
36 ±3
34 ±3
34 ±3
31 ±3
9.9 ±0.9
8.8 ±0.6
7.8 ±0.5
7.1 ±0.5
9.9 ±0.9
8.8 ±0.6
7.8 ±0.5
7.1 ±0.5
VSWR
< 1.5
Horizontal beam centers (°)
-28
-29
-29
-28
28
29
29
28
Front to back ratio, copolar (dB)
25
26
28
28
25
26
28
28
Cross polar ratio at boresight
(dB)
15
18
18
15
15
18
18
15
Electrical Properties - Scenario-based Beam 2 (RAT :FDD-LTE)
Frequency range (MHz)
Radiation
parameters
1695 – 2690 (By1/Ty2)
Gain (dBi)
15.2
Front to back ratio (dB)
≥ 25
65° Broadcast Cross polar ratio at boresight (dB)
beam
Vertical 3dB beam width (°)
Service beam
≥ 15
7.8
Side lobe suppression for first side lobe above main
beam (dB)
≥ 15
Gain (dBi)
20.1
Horizontal 3dB beam width (°)
33
Vertical 3dB beam width (°)
3.9
Front to back ratio (dB)
≥ 25
421
Product
List
Product
Category
A06240PD00v06
D06X-2x(690-960)/4x(1695-2690)-2x65/(33|65)-2x15.5i/(18i|15.5i)6xM-RSector Reconfigurable Software Defined Antenna with 4
Integrated RCUs - 2.0m
Mechanical Properties
2099 x 499 x 206
Packing dimensions (H x W x D)
(mm)
2360 x 550 x 245
Antenna net weight (kg)
(620)
68
Antenna dimensions (H x W x D)
(mm)
41
Clamps weight (kg)
6.3 (2 units)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
2099
56 (Included clamps)
1420
Antenna packing weight (kg)
Frontal:
765 (at 150 km/h)
Lateral:
395 (at 150 km/h)
Maximum:
1000 (at 150 km/h)
Wind load (N)
Max. operational wind speed
(km/h)
200
Survival wind speed (km/h)
250
Connector
2 x MQ4 + 5 x 4.3-10 Female
Bottom
59
Connector position
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Model
Description
Weight Units per antenna
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 12 ° 3.1 kg 1 (Separate packing)
Integrated RET S/N:
y2
HWxxxx……...Lr1
HWxxxx………Rr2
y1
HWxxxx………By1
HWxxxx………Ty2
r - Red
R - Right array
y - Yellow
T - Top
r1
r2
L - Left array
B - Bottom
422
Product
List
Product
Category
A06240PD00v06
D06X-2x(690-960)/4x(1695-2690)-2x65/(33|65)-2x15.5i/(18i|15.5i)6xM-RSector Reconfigurable Software Defined Antenna with 4
Integrated RCUs - 2.0m
Integrated RET Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 1.5 (when the motor does not work, 12V)
< 6 (when the motor is working,12 V)
< 10 (when the motor is starting up or shutting down,12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACG, WEEE
423
Product
List
Product
Category
A06240PD00v06
D06X-2x(690-960)/4x(1695-2690)-2x65/(33|65)-2x15.5i/(18i|15.5i)6xM-RSector Reconfigurable Software Defined Antenna with 4
Integrated RCUs - 2.0m
Pattern sample for reference
Scenario-based Beam 1
(690 - 960 MHz)
Sub-beam2
(1695 - 2690 MHz)
Sub-beam1
(1695 - 2690 MHz)
Scenario-based Beam 2
(1695 - 2690 MHz)
424
Product
List
Product
Category
ATR4518S2v06
CXXX-698-960/1710-2690/1710-2690-65/65/65-14.5i/17.5i/17.5iM/M/M-R
Antenna Specifications
Electrical Properties
698 – 960 (r1)
Frequency range (MHz)
698 - 803
790 - 862
2 x (1710 - 2690) (Ly1/Ry2)
824 - 894
880 - 960
Polarization
1920 2200
2200 2490
2490 2690
+45° , -45°
0 - 10 , continuously adjustable , each band
separately
0 - 10 , continuously adjustable
Electrical downtilt (°)
Gain (dBi)
1710 1990
at mid Tilt
over all Tilts
13.3
13.7
13.8
14.3
16.6
16.9
17.2
17.5
13.2±0.5
13.6±0.5
13.7±0.5
14.2±0.5
16.5±0.5
16.8±0.5
17.1±0.5
17.4±0.5
Side lobe suppression for
first side lobe above main
beam (dB)
> 15
> 15
> 15
> 15
> 16
> 16
> 16
> 16
Horizontal 3dB beam width
(°)
72 ±5
70 ±5
69 ±5
68 ±5
66 ±5.0
64 ±5.0
65 ±5.0
65 ±5.0
Vertical 3dB beam width (°)
16.5 ±1.0
15.0 ±0.8
14.5 ±0.8
13.5±0.6
8.0 ±0.5
7.4 ±0.5
6.6 ±0.5
6.0 ±0.5
VSWR
< 1.5
Cross polar isolation (dB)
≥ 25
Interband isolation (dB)
≥ 28
Front to back ratio , ±30°
(dB)
Cross polar ratio (dB)
0
°
> 24
> 24
> 24
> 24
> 26
> 26
> 26
> 26
> 17
> 17
> 17
> 17
> 17
> 17
> 17
> 17
Max. effective power per
port (W)
500 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Max. effective power whole
antenna (W)
700 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
1360 x Φ450
1595 x Φ450 (With Maintenance Cabinet)
Packing dimensions (H x W x D) (mm)
1810 x 580 x 700
Antenna weight (kg)
85
Antenna packing weight (kg)
120
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
610 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
Φ450
235
Wind load (N)
1595
Antenna dimensions (H x W x D) (mm)
1360
Mechanical Properties
3 x 6 x 4.3-10 Female
Connector position
Bottom
425
Φ450
Product
List
Product
Category
ATR4518S2v06
CXXX-698-960/1710-2690/1710-2690-65/65/65-14.5i/17.5i/17.5iM/M/M-R
Integrated RET Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V)
< 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 120 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
DC
n/c
RS-485B
4
5
6
7
8
n/c
RS-485A
DC
DC return
n/c
5 (8/20 μs Differential mode)
8 (8/20 μs Common mode)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Certification: RoHS, WEEE
Integrated RET S/N:
HWxxxx….Ly1
HWxxxx…Ry2
HWxxxx……r1
r - Red
L - Left array
y1
r1
y2
y - Yellow
R - Right array
Flange interface (thickness: 12 mm)
426
Product
List
Product
Category
ATR4518S2v06
CXXX-698-960/1710-2690/1710-2690-65/65/65-14.5i/17.5i/17.5iM/M/M-R
Pattern sample for reference
1710 - 2690 MHz
(Ly1/Ry2)
698 - 960 MHz
(r1)
427
Product
List
Product
Category
ADU4514S0v06
CXX-1710-2690/1710-2690-65/65-14i/14i-M/M-R
EasyRET 2H 12-Port Antenna with 3 Integrated RCUs - 1.3m
Antenna Specifications
Electrical Properties
2 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
2200 - 2490
Polarization
2490 - 2690
+45° , -45°
2 – 12, continuously adjustable
Electrical downtilt (°)
13.8
13.9
14.0
14.1
13.7±0.5
13.8 ±0.5
13.9±0.5
14.0±0.5
Side lobe suppression for first
side lobe above main beam (dB)
> 16
> 16
> 16
> 16
Horizontal 3dB beam width (°)
70 ±2
70 ±3
69 ±4
68 ±6
16.8 ±1.5
15.5 ±1.2
13.2 ±0.8
12.0 ±0.6
Gain (dBi)
at mid Tilt
over all Tilts
Vertical 3dB beam width (°)
VSWR
< 1.5
Cross polar isolation (dB)
≥ 26
Interband isolation (dB)
≥ 28
Front to back ratio, ±30° (dB)
> 25
> 25
> 25
> 25
Cross polar ratio (dB)
> 18
> 18
> 18
> 17
0°
Max. effective power per port
(W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Packing dimensions (H x W x D) (mm)
1755 x 265 x 270
Antenna weight (kg)
17.5
Antenna packing weight (kg)
20.5
Radome material
Fiberglass
Radome colour
Light grey
Wind load (N)
-40 .. +65
218 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
3 x 4 x 4.3-10 Female
Connector position
Bottom
285
Operational temperature (℃)
Φ 160
1595
1310 x Φ160
1595 x Φ160 (With Maintenance Cabinet)
1310
Antenna dimensions (H x W x D) (mm)
Φ
165
428
Product
List
Product
Category
ADU4514S0v06
CXX-1710-2690/1710-2690-65/65-14i/14i-M/M-R
EasyRET 2H 12-Port Antenna with 3 Integrated RCUs - 1.3m
Integrated RET Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor activated, 12V)
< 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 120 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
5 (8/20 μs Differential mode)
8 (8/20 μs Common mode)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Certification: RoHS, WEEE
Flange interface (thickness: 12 mm)
Integrated RET S/N:
HWxxxx……y1/y2
HWxxxx……y3/y4
HWxxxx……y5/y6
y2/y4/y6 Top
y1/y3/y5 Bottom
Pattern sample for reference
y - Yellow
1710 - 2690 MHz
429
Product
List
Product
Category
C. Digital Antenna System
C-1. RET System
C - 1 - 1. Remote Control Unit (RCU)
Antenna and RCU configuration list
Antenna and AIMM configuration list
Input voltage
range (V)
DC 10 - 30
AISG type
Adjustment time
(full range) (min)
Calibration time
(min)
Dimension (mm)
Model
Page
AISG 2.0
Typ.<0.58
(typically,
depending on
antenna type)
<3
(typically,
depending on
antenna type)
180 x 65 x 54
ARCU02004v01
(AISG 2.0)
431
C-1-2. Antenna Imformation Management Module (AIMM)
Input voltage
range (V)
AISG type
Adjustment time
(full range) (min)
Dimension (mm)
Model
Page
DC 10 - 30
AISG 2.0
Typ. < 0.5
197 x 82 x 30
AIMM20S11v01
432
DC 10 - 30
AISG 2.0
Typ. < 0.5
197 x 107 x 30
AIMM20D11v01
433
DC 10 - 30
AISG 2.0
Typ. < 0.67
203 x 153 x 30
AIMM20M11S0v01
434
DC 10 - 30
AISG 2.0
Typ. < 0.67
203 x 153 x 30
AIMM20M22S0v01
435
DC 10 - 30
AISG 2.0
Typ. < 0.67
203 x 153 x 30
AIMM20M11BTv02
436
DC 10 - 30
AISG 2.0
Typ. < 0.67
203 x 153 x 30
AIMM20M22BTv01
437
DC 10 - 30
AISG 2.0
Typ. < 0.5
170 x 136 x 27
AIMM21S11EBv01
438
DC 10 - 30
AISG 2.0
Typ. < 0.5
189 x 146 x 31.5
AIMM21S11EBAv01
439
DC 10 - 30
AISG 2.0
Typ. < 0.5
189 x 146 x 31.5
AIMM21D11EBAv01
440
C-1-3. Smart Bias Tee (SBT)
Frequency Range
(MHz)
AISG type
690-2700
AISG 2.0
690-2700
AISG 2.0
Insertion loss (dB)
≤ 0.1
(690-960/17102690 MHz)
≤ 0.15
(960-1710 MHz)
Dimension (mm)
Connector
Model
Page
75 x 137 x 45
4.3-10
ASBT00001v06
441
75 x 137 x 45
4.3-10
ASBT00002v06
441
C-1-5. AISG Connecting Cables
Model
Page
AISG Connecting Cables For Remote Electrical Tilt (RET) System
444
AISG Connecting Cables For Huawei RRU RET_Port
445
430
Product
Category
ARCU02004v01 (AISG 2.0)
RCU
Feature Description


RCU(Remote Control Unit) drives the phase shifter in antenna through mechanical interface to
change the electrical downtilt.
RCU is suitable for daisy chain solution.
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 0.5 when the motor does not work, 12 V)
<3 (when the motor is working, 12V)
<10 (when the motor is starting up or shutting down, 12V)
Adjustment time (full range) (s)
Typ. 35 (depending on antenna type)
Calibration time (min)
< 3 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male // Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC
return
n/c
Housing material
Profile: Aluminium coated // Cover: Aluminium die cast coated
Color
RAL 7035
Weight (g)
440
Operating temperature range
(℃)
-40 … +65
Protection class
IP24
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
Dimensions (L x W x H) (mm)
180 x 65 x 54
Packing size (L x W x H) (mm)
268 x 105 x 95
Standards:
EN/IEC 60950-1(Safety)
Please note:
Before the installation, check whether the RCU and
base station support the same AISG protocol. If not,
contact the technical support personnel of Huawei.
EN/IEC 60950-22(Safety – Equipment
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
CE, FCC, IC, ECM, RoHS, REACH, WEEE
Daisy chain out: Female
Daisy chain in: Male
Drainage
Hole
Appearance
Bottom view of RCU
431
Male
Female
Product
List
Product
Category
AIMM20S11v01
Single-band Antenna Information Management Module with One
Pair of AISG Connectors (1 Input and 1 Output)
Feature Description

The antenna information management module (AIMM) supports remote electrical tilt (RET)
function and manages antenna information.
Protocol
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male // Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Operating temperature range (℃)
-40 to +65
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
Weight (g)
350
Packing Weight (g)
448
Dimensions (L x W x H) (mm)
197 x 82 x 30
Packing size (L x W x H) (mm)
250 x 118 x 40
Standards:
EN/IEC 60950-1(Safety)
Please note:
Before the installation, check whether the AIMM and base
station support the same AISG protocol. If not, contact the
technical support personnel of Huawei.
EN/IEC 60950-22(Safety – Equipment
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
CE, FCC, IC, ECM, RoHS, REACH, WEEE
Daisy chain in: Male
Daisy chain out: Female
Appearance
Male
432
Female
Product
List
Product
Category
AIMM20D11v01
Dual-band Antenna Information Management Module with One
Pair of AISG Connectors (1 Input and 1 Output)
Feature Description

The antenna information management module (AIMM) supports remote electrical tilt (RET)
function and manages antenna information.
Protocol
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male // Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Operating temperature range (℃)
-40 … +65
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
Weight (g)
500
Packing weight (g)
598
Dimensions (L x W x H) (mm)
203 x 107 x 30
Packing size (L x W x H) (mm)
250 x 118 x 40
Standards:
EN/IEC 60950-1(Safety)
EN/IEC 60950-22(Safety – Equipment
installed outdoor)
EN 55032(Emission)
Please note:
Before the installation, check whether the AIMM and
base station support the same AISG protocol. If not,
contact the technical support personnel of Huawei.
EN/IEC 62368-1(Safety)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
CE, FCC, IC, ECM, RoHS, REACH, WEEE
Daisy chain in: Male
Daisy chain out: Female
Appearance
Male
433
Female
Product
List
Product
Category
AIMM20M11S0v01
Multi-band Antenna Information Management Module with One
Pair of AISG Connectors (1 Input and 1 Output)
Feature Description

The antenna information management module (AIMM) supports remote electrical tilt (RET)
function and manages antenna information.
Protocol
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male // Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Operating temperature range (℃)
-40 … +65
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
Weight (g)
570
Packing weight (g)
683
Dimensions (L x W x H) (mm)
203 x 153 x 30
Packing size (L x W x H) (mm)
245 x 163 x 37
Standards:
EN/IEC 60950-1(Safety)
EN/IEC 60950-22(Safety – Equipment
installed outdoor)
EN 55032(Emission)
Please note:
Before the installation, check whether the AIMM and base
station support the same AISG protocol. If not, contact the
technical support personnel of Huawei.
EN/IEC 62368-1(Safety)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
CE, FCC, IC, ECM, RoHS, REACH, WEEE
Daisy chain in: Male
Daisy chain out: Female
Appearance
Male
434
Female
Product
List
Product
Category
AIMM20M22v01
Multi-Band Antenna Information Management Module with Two
Pairs of AISG Connectors (2 Input and 2 Output)
Feature Description

The antenna information management module (AIMM) supports remote electrical tilt (RET)
function and manages antenna information.
Protocol
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male // Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Operating temperature range (℃)
-40 to +65
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
Weight (g)
670
Packing weight (g)
783
Dimensions (L x W x H) (mm)
203 x 153 x 30
Packing size (L x W x H) (mm)
245 x 163 x 37
Standards:
EN/IEC 60950-1(Safety)
EN/IEC 60950-22(Safety – Equipment
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
ETSI EN 301 489
Please note:
1. Before the installation, check whether the AIMM
and base station support the same AISG protocol.
If not, contact the technical support personnel of
Huawei.
2. For Multi-RET requirements, please contact the
technical support personnel of Huawei.
FCC Part 15
ICES-003
Certification:
CE, FCC, IC, ECM, RoHS, REACH, WEEE
Daisy chain out: Female
Daisy chain in: Male
Daisy chain out: Female
Daisy chain in: Male
Appearance
Male
435
Female
Product
List
Product
Category
AIMM20M11BTv02
Multi-band Antenna Information Management Module with a Pair of
AISG Connectors (1 Input and 1 Output)
Feature Description

The antenna information management module (AIMM) supports remote electrical tilt (RET)
function and manages antenna information.
Protocol
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 1.5 (when the motor does not work, 12 V)
< 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male // Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Operating temperature range (℃)
-40 … +65
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
Weight (g)
610
Packing weight (g)
723
Dimensions (L x W x H) (mm)
203 x 153 x 30
Packing size (L x W x H) (mm)
245 x 163 x 37
Standards:
EN/IEC 60950-1(Safety)
EN/IEC 60950-22(Safety – Equipment
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
Please note:
Before the installation, check whether the AIMM
and base station support the same AISG protocol.
If not, contact the technical support personnel of
Huawei.
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
CE, FCC, IC, ECM, RoHS, REACH, WEEE
Daisy chain in: Male
Daisy chain out: Female
Appearance
Male
436
Female
Product
List
Product
Category
AIMM20M22BTv01
Multi-band Antenna Information Management Module with Two
Pairs of AISG Connectors (2 Input and 2 Output)
Feature Description

The antenna information management module (AIMM) supports remote electrical tilt (RET)
function and manages antenna information.
Protocol
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 1 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male // Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Operating temperature range (℃)
-40 … +65
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
Weight (g)
670
Packing weight (g)
783
Dimensions (L x W x H) (mm)
203 x 153 x 30
Packing size (L x W x H) (mm)
245 x 163 x 37
Standards:
EN/IEC 60950-1(Safety)
EN/IEC 60950-22(Safety – Equipment
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
Please note:
Before the installation, check whether the AIMM
and base station support the same AISG protocol.
If not, contact the technical support personnel of
Huawei.
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
CE, FCC, IC, ECM, RoHS, REACH, WEEE
Daisy chain out: Female
Daisy chain in: Male
Daisy chain out: Female
Daisy chain in: Male
Appearance
Male
437
Female
Product
List
Product
Category
AIMM21S11EBv01
Single-band Antenna Information Management Module with a
Pair of AISG Connectors (1 Input and 1 Output)
Feature Description

The antenna information management module (AIMM) supports remote electrical tilt (RET)
function, remote azimuth adjustment, horizontal 3dB beam width adjustment and manages
antenna information.
RET Properties
RET type
RET protocols
Input voltage range (V)
Power consumption (W)
Adjustment time (full range) (s)
Connectors
Pin assignment according AISG
1
DC
Operating temperature (℃)
Lightning protection (kA)
Integrated RET
AISG 2.0 / 3GPP
10 - 30 DC
< 1 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Typ. 30
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
2
3
4
5
6
7
n/c
RS-485B
n/c
RS-485A
DC
DC return
-40 … +65
10 (8/20 μs)
8
n/c
RAE Properties
RAE type
RAE protocols
Integrated RAE
AISG-ES-RAE V2.1.0
EasyBeam Properties
For details , see the antenna datasheet .
Mechanical Properties
Weight (g)
Packing weight (g)
Dimensions (L x W x H) (mm)
Packing size (L x W x H) (mm)
Standards:
500
598
170 x 136 x 27
200 x 148 x 35
EN/IEC 60950-1(Safety)
Please note:
1. Before the installation, check whether the AIMM
and base station support the same AISG protocol.
If not, contact the technical support personnel of
Huawei.
2. Before using this product, ensure that the base
station supports the AISG-ES-RAE V2.1.0. If the
base station does not support the AISG-ES-RAE
V2.1.0, the RAE function cannot be used.
EN/IEC 60950-22(Safety – Equipment
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
CE, FCC, IC, ECM, RoHS, REACH, WEEE
Daisy chain in: Male
Daisy chain out: Female
Appearance
Female
Male
438
Product
List
Product
Category
AIMM21S11EBAv01
Single-band Antenna Information Management Module with a Pair
of AISG Connectors (1 Input and 1 Output)
Feature Description

The antenna information management module (AIMM) supports remote electrical tilt (RET)
function, remote azimuth adjustment, horizontal 3dB beam width adjustment and manages
antenna information.
RET Properties
RET type
RET protocols
Input voltage range (V)
Power consumption (W)
Adjustment time (full range) (s)
Connectors
Pin assignment according AISG
1
DC
Operating temperature (℃)
Lightning protection (kA)
Integrated RET
AISG 2.0 / 3GPP
10 - 30 DC
< 1 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Typ. 30
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
2
3
4
5
6
7
n/c
RS-485B
n/c
RS-485A
DC
DC return
-40 to +65
5 (8/20 μs)
8
n/c
RAE Properties
RAE type
RAE protocols
Integrated RAE
AISG-ES-RAE V2.1.0
EasyBeam Properties
For details , see the antenna datasheet .
Mechanical Properties
Weight (g)
Packing weight (g)
Dimensions (L x W x H) (mm)
Packing size (L x W x H) (mm)
Standards:
EN/IEC 60950-1(Safety)
EN/IEC 60950-22(Safety – Equipment
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
550
663
189 x 146 x 31.5
245 x 163 x 37
Please note:
1. Before the installation, check whether the AIMM
and base station support the same AISG protocol.
If not, contact the technical support personnel of
Huawei.
2. Before using this product, ensure that the base
station supports the AISG-ES-RAE V2.1.0. If the
base station does not support the AISG-ES-RAE
V2.1.0, the RAE function cannot be used.
CE, FCC, IC, ECM, RoHS, REACH, WEEE
Daisy chain in: Male
Daisy chain out: Female
Appearance
Male
439
Female
Product
List
Product
Category
AIMM21D11EBAv01
Dual-Band Antenna Information Management Module with a Pair
of AISG Connectors(1 Input and 1 Output)
Feature Description

The antenna information management module (AIMM) supports remote electrical tilt (RET)
function, remote azimuth adjustment, horizontal 3dB beam width adjustment and manages
antenna information.
RET Properties
RET type
Integrated RET
RET protocols
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 1 (when the motor does not work, 12 V)
< 3 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 30
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
Operating temperature (℃)
-40 to +65
Lightning protection (kA)
5 (8/20 μs)
RAE Properties
RAE type
Integrated RAE
RAE protocols
AISG-ES-RAE V2.1.0
EasyBeam Properties
For details , see the antenna datasheet .
Mechanical Properties
Weight (g)
600
Packing weight (g)
713
Dimensions (L x W x H) (mm)
189 x 146 x 31.5
Packing size (L x W x H) (mm)
245 x 163 x 37
Standards:
EN/IEC 60950-1(Safety)
EN/IEC 60950-22(Safety – Equipment
installed outdoor)
EN 55032(Emission)
EN/IEC 62368-1(Safety)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
Please note:
1. Before the installation, check whether the AIMM
and base station support the same AISG protocol.
If not, contact the technical support personnel of
Huawei.
2. Before using this product, ensure that the base
station supports the AISG-ES-RAE V2.1.0. If the
base station does not support the AISG-ES-RAE
V2.1.0, the RAE function cannot be used.
CE, FCC, IC, ECM, RoHS, REACH, WEEE
Daisy chain in: Male
Daisy chain out: Female
Appearance
Male
440
Female
Product
List
Product
Category
ASBT00001v06 SBT-690-2700-001
ASBT00002v06 SBT-690-2700-002
Features

Convert signals between OOK and RS485.

Low passive intermodulation products, low
insertion loss and high power capacity.

Ultra wide band design for various
communication system.

Small volume, light weight.

Support AISG 2.0 protocol.
SBT = Smart Bias Tee
RCU = Remote Control Unit for remote electrical
control of antenna tilt
BTS = Base Transceiver Station
AISG= Antenna Interface Standards Group
ASBT00002v06
ASBT00001v06
Block Diagram
Antenna
SBT
Feeder Cable
Feeder Cable
Digital
RCU
ASBT00001v06
ASBT00002v06
SBT
CCU
441
BTS
Product
List
Product
Category
ASBT00001v06 SBT-690-2700-001
ASBT00002v06 SBT-690-2700-002
ASBT00001v06
ASBT00002v06
Port 1 (Connector type)
Antenna (4.3-10 Male)
BTS (4.3-10 Male)
Port 2 (Connector type)
Feeder (4.3-10 Female)
Feeder (4.3-10 Female)
AISG (8-pin Connecter Female)
AISG (8-pin Connecter Male)
Model
Port AISG (Connector type)
Electrical Properties
Frequency range (MHz)
Insertion loss (dB)
Isolation for DC signal
(dB)
690 - 2700
≤ 0.1 (690 - 960 MHz //1710 - 2690 MHz)
≤ 0.15 (960 - 1710 MHz)
Port 1 ←→ Port 2
Port 1 ←→ Port 2
≥ 70
Port 1 ←→ Port
AISG
VSWR
Port 1 and Port 2
≤ 1.15 (690 - 960 MHz // 1710 - 2690 MHz)
≤ 1.2 (960 - 1710 MHz)
Input power (W)
Port 1 and Port 2
Port AISG
Avg. ≥ 500 (690 - 960 MHz) // Avg. ≥ 250 (1710 - 2690 MHz)
< 2.5 A (+8 … +30 V DC)
DC supply voltage (V)
+8 … +30
RF impedance (Ω)
50
Intermodulation products (dBc)
< -160 (3rd order, 2 x 43 dBm)
Power consumption (W)
Typ. 0.6
Modem carrier frequency (MHz)
2.176
Environmental Specification
Operating temperature (℃)
-40 … +70
Application scene
Indoor // outdoor
IP rating
IP67
Lightning protection (kA)
3 (10/350 us)
Mechanical Specification
SBT Dimensions (W x H x D) (mm)
75 x 137 x 45 (with connectors)
Packing dimensions (W x H x D) (mm)
78 x 185 x 58
SBT net Weight (kg)
< 0.75
Packing weight (kg)
< 0.80
442
Product
List
Product
Category
ASBT00001v06 SBT-690-2700-001
ASBT00002v06 SBT-690-2700-002
ASBT00001v06
ASBT00002v06
Unit: mm
443
Product
List
Product
Category
AISG Connecting Cables
For Remote Electrical Tilt (RET) System
Technical Specification
2 x 8 pin connector according to IEC 60130-9
Female / Male
Connectors
Cable
2 x 0.25 mm2 + 4 x 0.75 mm2 cable according to UL2464
Rate current
4A
Protection Class
IP67 (Coupled)
Temperature Range
-40 ~ 80 ℃
Color
Black
Single Bend radius
60 mm Min.
Multiple Bend radius
120 mm Min.
Application scene
Indoor // Outdoor
Pin Number
Signal
1
+12 V DC Nominal
2
N/C
3
RS485 B
4
N/C
5
RS485 A
6
10 V - 30 V DC
7
DC Return
8
N/C
Unit: mm
Cable series
Length
BOM Code
Model
0.5 m
04045920
AAISGCBL0
2m
04045921
AAISGCBL2
5m
04050228
AAISGCBL5
10 m
04050184
AAISGCBL10
15 m
04045922
ACOAISG01
30 m
04050230
AAISGCL00
50 m
04050231
AAISGCL50
60 m
04050182
AAISGCL60
70 m
04050232
AAISGCBL70
444
Product
List
Product
Category
AISG Connecting Cables
For Huawei RRU RET_Port
Technical Specification
8 pin connector according to IEC 60130-9
Female
Connector 1 (to be connected to RET module)
9 pin DB9 connector, water-proofed
Male
Connector 2 (to be connected to Huawei RRU “RET_port”)
Cable
4 Pair x 24 AWG
Rate current
4A
Protection Class
IP67 (when coupled on RRU and RET)
Temperature Range
-40 ~ 80 ℃
Color
Black
Single Bend radius
60 mm Min.
Multiple Bend radius
120 mm Min.
Application scene
Pin Number
1
Indoor or Outdoor
Signal
Female
Male
+12 V DC nominal
+12 V DC nominal
2
N/C
N/C
3
RS485 B
RS485 B
4
RS485 GND
RS485 GND
5
RS485 A
RS485 A
6
+12 V DC nominal
N/C
7
DC Return
N/C
8
N/C
N/C
9
/
DC Return
Female
Male
Cable series
Length
BOM Code
Model
3m
04070193
CSST00101
5m
04070097
ACOAISG02
10m
04070097-002
AISGCC10M
20m
04070097-003
AISGCC20M
445
Product
List
Product
Category
D. Antenna Line Product
D-1. TMA
Description
Frequency Range
(MHz)
AISG
type
Gain(dB)
Connector Dimension (mm)
Model
Page
700M
RX:703-748MHz
TX:758-803MHz
AISG
v2.0
12 ±1
4 x 4.3-10
215 x 290 x 130 ATA702000v06
447
DD800M
RX:832-862MHz
TX:791-821MHz
AISG
v2.0
12±1
4 x 4.3-10
170 × 230 × 120 ATA802001v06
450
E900M
RX:880-915MHz
TX:925-960MHz
AISG
v2.0
12±1
4 x 4.3-10
170 × 230 × 120 ATA902007v06
453
1800M
RX:1710-1785 MHz
TX:1805-1880 MHz
AISG
v2.0
12±1
4 x 4.3-10
203 x 269 x 56
ATA182003v06
456
2100M
RX:1920-1980MHz
TX:2110-2170MHz
AISG
v2.0
12±1
4 x 4.3-10
170 × 225 × 54.5 ATA212007v06
459
2600M
RX:2500-2570MHz
TX:2620-2690MHz
AISG
v2.0
12 ±1
4 x 4.3-10
160 x 210 x 54.5 ATA262000v06
462
Dual Band
800M & 900M
(2input4output)
RX:832-862MHz/880-915MHz AISG
TX:791-821/925-960MHz
v2.0
12 ±1
6 x 4.3-10
247 x 342 x 132 ATADU2024v06
465
Dual Band 1800M &
RX:1710-1785/1920-1980MHz AISG
2100M
TX:1805-1880/2110-2170MHz v2.0
(2input2output)
12±1
4 x 4.3-10
203 x 233 x 96
ATADU2017v06
468
Dual Band 1800M &
RX:1710-1785/1920-1980MHz AISG
2100M
TX:1805-1880/2110-2170MHz v2.0
(2input4output)
12±1
6 x 4.3-10
196 x 280 x 110 ATADU2023v06
471
RX:1710-1785&1920-1980/
Dual Band (1800M &
2500-2570MHz
2100M) & 2600M
TX:1805-1880&2110-2170/
(2input4output)
2620-2690MHz
AISG
v2.0
12±1
6 x 4.3-10
252 x 236 x 95
ATADU2015v06
474
Dual Band
700M & 800M &
900M
(2input2output)
RX:703-748/832-915MHz
TX:758-821/925-960MHz
AISG
v2.0
12±1
4 x 4.3-10
256 x 296 x 126 ATADU2016v06
477
Triple Band (1800M
& 2100M) & 2600M
(2input2output)
RX:1710-1785&1920-1980/
2500-2570MHz
TX:1805-1880&2110-2170/
2620-2690MHz
AISG
12(Nominal)
v2.0
4 x 4.3-10
295 x 250 x 95
ATATR2002v06
480
446
Product
Category
ATA702000v06
DTMA-700-12dB-2eNodeBport2ANTport-AISG
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It
helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system.
It enhances the uplink coverage and reduces uplink and downlink imbalance of the base station. It
effectively reduces the transmitting power used by cellphones and improves voice and data
communication quality.
Features

High linearity and low noise performance.

Power failure bypass for high reliability.

Light weight and compact design.

Wall mounting and mast mounting.

Built-in lightning protection up to 10 kA.

Support AISG 2.0 protocol.

Support default 12dB fixed gain.
Appearance and Block Diagram
ANT 0
ANT 1
Lightning
protection
Lightning
protection
LNA
Control
Circuit
&
Modem
LNA
RS485
DC & OOK
Bias Tee &
Lightning protection
eNodeB 0
447
DC & OOK
RET
Product
List
Bias Tee &
Lightning protection
eNodeB 1
Product
Category
ATA702000v06
DTMA-700-12dB-2eNodeBport2ANTport-AISG
Tx Specifications
Frequency range (MHz)
758 - 803
Bandwidth (MHz)
45
Insertion loss (dB)
Avg. < 0.45
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc)
≤ -160 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
703 - 748
Bandwidth (MHz)
45
Return loss (dB)
≥ 18 (DC ON)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB)
≤ 3.5 (DC OFF)
Gain (dB)
12 ±1
Noise figure (dB)
Avg. < 1.5 (12 dB Gain, +22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 8 (12 dB Gain)
OIP3 (dBm)
≥ 20 (12 dB Gain)
Electrical Specifications
AISG Mode (Total ports)
DC supply voltage (V)
Operating current per TMA
(mA)
(without RET)
9 - 30
@12 V
Max. 192
@17 V
Max. 139
@30 V
Max. 95
Alarm management
AISG
Power consumption (W)
< 3.5
Environmental Specification
Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
EN 301 489-1 , EN 301 489-50
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
DTMA dimensions (W x H x D) (mm)
215 x 290 x 130 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
290 x 500 x 265
DTMA weight (kg)
≤ 8.5 (with brackets)
Packing weight (kg)
≤ 9.5
DTMA Volume (L)
AISG connector
Mounting
8.1
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
Mast diameter (mm)
40 - 135
Connector
4 x 4.3-10 Female
448
Product
List
Product
Category
ATA702000v06
DTMA-700-12dB-2eNodeBport2ANTport-AISG
M8
Unit : mm
449
Product
List
Product
Category
ATA802001v06
DTMA-800-12dB-2BTSport2ANTport-AISG
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It
helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system.
It enhances the uplink coverage and reduces uplink and downlink imbalance of the base station. It
effectively reduces the transmitting power used by cellphones and improves voice and data
communication quality.
Features

High linearity and low noise performance.

Power failure bypass for high reliability.

Light weight and compact design.

Wall mounting and pole mounting.

Built-in lightning protection up to 10 kA.

Support AISG 2.0 protocol.

Support 12dB fixed gain.
Appearance and Block Diagram
450
Product
List
Product
Category
ATA802001v06
DTMA-800-12dB-2BTSport2ANTport-AISG
Tx Specifications
Frequency range (MHz)
791 - 821
Bandwidth (MHz)
30
Insertion loss (dB)
Avg. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc)
≤ -160 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
832 - 862
Bandwidth (MHz)
30
≥ 18 (DC ON)
≥ 13 (DC OFF)
Return loss (dB)
Insertion loss in by-pass mode (dB)
Avg. ≤ 2 (DC OFF)
Gain (dB)
12 ±1
Noise figure (dB)
Avg. < 1.3 (12 dB Gain, +22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 12 (12 dB Gain)
OIP3 (dBm)
≥ 27 (12 dB Gain)
Electrical Specifications
AISG Mode (BTS0,BTS1)
DC supply voltage (V)
Operating current per TMA (mA)
(without RET)
9 - 30
@12 V
Max. 210
@17 V
Max. 160
@30V
Max. 95
Power consumption (W)
<3
Environmental Specification
Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
EN 301 489-1, EN 301 489-50
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
DTMA dimensions (W x H x D) (mm)
170 x 230 x 120(without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
240 x 405 x 210
DTMA weight (kg)
≤ 6.5 (with brackets)
Packing weight (kg)
≤ 7.5
DTMA Volume (L)
AISG connector
Mounting
4.7
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5:
RS485A, pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Pole mounting
Mast diameter (mm)
40 - 135
Connector
4 x 4.3-10 Female
451
Product
List
Product
Category
ATA802001v06
DTMA-800-12dB-2BTSport2ANTport-AISG
Unit : mm
452
Product
List
Product
Category
ATA902007v06
DTMA-E900-12dB-2BTSport2ANTport-AISG
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It
helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system.
It enhances the uplink coverage and reduces uplink and downlink imbalance of the base station. It
effectively reduces the transmitting power used by cellphones and improves voice and data
communication quality.
Features

High linearity and low noise performance.

Power failure bypass for high reliability.

Light weight and compact design.

Wall mounting and pole mounting.

Built-in lightning protection up to 10 kA.

Support AISG 2.0 protocol.

Support default 12dB fixed gain.
Appearance and Block Diagram
453
Product
List
Product
Category
ATA902007v06
DTMA-E900-12dB-2BTSport2ANTport-AISG
Tx Specifications
Frequency range (MHz)
925 - 960
Bandwidth (MHz)
35
Insertion loss (dB)
Avg. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc)
≤ -160 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
880 - 915
Bandwidth (MHz)
35
≥ 18 (DC ON)
≥ 13 (DC OFF)
Return loss (dB)
Insertion loss in by-pass mode (dB)
Avg. ≤ 2.0 (DC OFF)
Gain (dB)
12 ±1
Noise figure (dB)
Avg. < 1.3 (12 dB Gain, +22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 12 (12 dB Gain)
OIP3 (dBm)
≥ 27 (12 dB Gain)
Electrical Specifications
AISG Mode (BTS0,BTS1)
DC supply voltage (V)
Operating current per TMA (mA)
(without RET)
9 - 30
@12 V
Max. 210
@17 V
Max. 160
@30 V
Max. 95
Power consumption (W)
<3
Environmental Specification
Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
EN 301 489-1, EN 301 489-50
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
DTMA dimensions (W x H x D) (mm)
170 x 230 x 120 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
240 x 405 x 210
DTMA weight (kg)
≤ 6.5 (with brackets)
Packing weight (kg)
≤ 7.5
DTMA Volume (L)
AISG connector
Mounting
4.7
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5:
RS485A, pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Pole mounting
Mast diameter (mm)
40 - 135
Connector
4 x 4.3-10 Female
454
Product
List
Product
Category
ATA902007v06
DTMA-E900-12dB-2BTSport2ANTport-AISG
Unit : mm
455
Product
List
Product
Category
ATA182003v06
DTMA-1800-12dB-2BTSport2ANTport-AISG
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It
helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system.
It enhances the uplink coverage and reduces uplink and downlink imbalance of the base station. It
effectively reduces the transmitting power used by cellphones and improves voice and data
communication quality.
Features

High linearity and low noise performance.

Power failure bypass for high reliability.

Light weight and compact design.

Wall mounting and pole mounting.

Built-in lightning protection up to 10 kA.

Support AISG 2.0 protocol.

Support default 12dB fixed gain.
Appearance and Block Diagram
456
Product
List
Product
Category
ATA182003v06
DTMA-1800-12dB-2BTSport2ANTport-AISG
Tx Specifications
Frequency range (MHz)
1805 - 1880
Bandwidth (MHz)
75
Insertion loss (dB)
Avg. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc)
≤ -160 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
1710 - 1785
Bandwidth (MHz)
75
≥ 18 (DC ON)
≥ 13 (DC OFF)
Return loss (dB)
Insertion loss in by-pass mode (dB)
Avg. ≤ 2 (DC OFF)
Gain (dB)
12 ±1
Noise figure (dB)
Avg. < 1.4 (+22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 27
Electrical Specifications
AISH Mode (BTS0,BTS1)
DC supply voltage (V)
Operating current per TMA
(mA)
(without RET)
9 - 30
@12 V
Max. 210
@17 V
Max. 160
@30 V
Max. 95
Power consumption (W)
<3
Environmental Specification
Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
EN 301 489-1, EN 301 489-50
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
203 x 269 x 56
(without connectors, without brackets)
DTMA dimensions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
460 x 260 x 165
DTMA weight (kg)
≤ 4.9 (with brackets)
Packing weight (kg)
≤ 5.9
DTMA Volume (L)
AISG connector
Mounting
3.1
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
pole mounting
Mast diameter (mm)
40 - 135
Connector
4 x 4.3-10 Female
457
Product
List
Product
Category
ATA182003v06
DTMA-1800-12dB-2BTSport2ANTport-AISG
Unit : mm
458
Product
List
Product
Category
ATA212007v06
DTMA-2100-12dB-2BTSport2ANTport-AISG
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It
helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system.
It enhances the uplink coverage and reduces uplink and downlink imbalance of the base station. It
effectively reduces the transmitting power used by cellphones and improves voice and data
communication quality.
Features

High linearity and low noise performance.

Power failure bypass for high reliability.

Light weight and compact design.

Wall mounting and pole mounting.

Built-in lightning protection up to 10 kA.

Support AISG 2.0 protocol.

Support default 12dB fixed gain.
Appearance and Block Diagram
459
Product
List
Product
Category
ATA212007v06
DTMA-2100-12dB-2BTSport2ANTport-AISG
Tx Specifications
Frequency range (MHz)
2110 - 2170
Bandwidth (MHz)
60
Insertion loss (dB)
Avg. < 0.25
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc)
≤ -165 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
1920 - 1980
Bandwidth (MHz)
60
≥ 18 (DC ON)
≥ 13 (DC OFF)
Return loss (dB)
Insertion loss in by-pass mode (dB)
Avg. ≤ 2 (DC OFF)
Gain (dB)
12 ±1
Noise figure (dB)
Avg. < 1.2 (+22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 27
Electrical Specifications
AISG Mode (BTS0,BTS1)
DC supply voltage (V)
Operating current per TMA
(mA)
(without RET)
9 - 30
@12 V
Max. 210
@17 V
Max. 160
@30 V
Max. 95
Power consumption (W)
<3
Environmental Specification
Operating temperature range (℃)
-40 … +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
EN 301 489-1, EN 301 489-50
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
DTMA dimensions (W x H x D) (mm)
170 x 225 x 54.5 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
400 x 220 x 150
DTMA weight (kg)
≤ 3.8 (with brackets)
Packing weight (kg)
≤ 4.5
DTMA Volume (L)
AISG connector
Mounting
2.1
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A, pin7:
DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Pole mounting
Mast diameter (mm)
40 - 135
Connector
4 x 4.3-10 Female
460
Product
List
Product
Category
ATA212007v06
DTMA-2100-12dB-2BTSport2ANTport-AISG
Unit : mm
461
Product
List
Product
Category
ATA262000v06
DTMA-2600-12dB-2eNodeBport2ANTport-AISG
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It
helps to improve the signal-to-noise ratio and enhance the receiving sensitivity of the BTS system.
It enhances the uplink coverage and reduces uplink and downlink imbalance of the base station. It
effectively reduces the transmitting power used by cellphones and improves voice and data
communication quality.
Features

High linearity and low noise performance.

Power failure bypass for high reliability.

Light weight and compact design.

Wall mounting and mast mounting.

Built-in lightning protection up to 10 kA.

Support AISG 2.0 protocol.

Support default 12dB fixed gain.
Appearance and Block Diagram
ANT 0
ANT 1
Lightning
protection
Lightning
protection
LNA
Control
Circuit
&
Modem
LNA
RS485
DC & OOK
Bias Tee &
Lightning protection
eNodeB 0
462
DC & OOK
Bias Tee &
Lightning protection
eNodeB 1
RET
Product
List
Product
Category
ATA262000v06
DTMA-2600-12dB-2eNodeBport2ANTport-AISG
Tx Specifications
Frequency range (MHz)
2620 - 2690
Bandwidth (MHz)
70
Insertion loss (dB)
Avg. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc)
≤ -160 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
2500 - 2570
Bandwidth (MHz)
70
Return loss (dB)
≥ 18 (DC ON)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB)
≤ 3.0 (DC OFF)
Gain (dB)
12 ±1
Noise figure (dB)
Avg. < 1.3 (+22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Electrical Specifications
AISG Mode (BTS ports)
DC supply voltage (V)
Operating current per TMA
(mA)
(without RET)
9 - 30
@12 V
Max. 192
@17 V
Max. 139
@30 V
Max. 95
Alarm management
AISG
Power consumption (W)
< 3.5
Environmental Specification
Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
EN 301 489-1 , EN 301 489-50
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
DTMA dimensions (W x H x D) (mm)
160 x 210 x 54.5 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
205 x 380 x 130
DTMA weight (kg)
≤ 3.1 (with brackets)
Packing weight (kg)
≤ 4.0
DTMA Volume (L)
AISG connector
Mounting
1.8
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
Mast diameter (mm)
40 - 135
Connector
4 x 4.3-10 Female
463
Product
List
Product
Category
ATA262000v06
DTMA-2600-12dB-2eNodeBport2ANTport-AISG
M8
Unit : mm
464
Product
List
Product
Category
ATADU2024v06
MTMA-800/E900-12dB-2eNodeBport4ANTport-AISG
Product Description
The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the
antenna to satisfy the co-location purposes. It helps to improve the signal-to-noise ratio and
enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power
used by cellphones and improves voice and data communication quality. When scanning the AISG
ALD, the TMA is responding to the AISG controller with two individual serial numbers (unique IDs)
with each their two subunits (two subunits per frequency band).
Features

High linearity and low noise performance.

Power failure bypass for high reliability.

Light weight and compact design.

Designed for co-location purposes.

Wall mounting and mast mounting.

Built-in lightning protection up to 10 kA.

Support AISG 2.0 protocol.
Appearance and Block Diagram
465
Product
List
Product
Category
ATADU2024v06
MTMA-800/E900-12dB-2eNodeBport4ANTport-AISG
Tx Specifications
Frequency range (MHz)
Bandwidth (MHz)
791 - 821
925 - 960
30
35
Insertion loss (dB)
Typ. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc)
≤ -153 (3rd order; with 2 x 43 dBm)
Rx Specifications
Frequency range (MHz)
Bandwidth (MHz)
832 - 862
880 - 915
30
35
≥ 18 (DC ON)
≥ 14 (DC OFF)
Return loss(dB)
Insertion loss in by-pass mode (dB)
Typ. < 3.0
Gain (dB)
12 ±1
Noise figure (dB)
Typ. < 1.3
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Electrical Specifications
DC supply voltage (V)
Operating current per TMA
(mA)
(without RET)
9 - 30
@12 V
Max. 416
@17 V
Max. 294
@30 V
Max. 166
Alarm management
AISG
Power consumption (W)
< 5.0
Environmental Specification
Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
EN 301 489-1 , EN 301 489-50
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
MTMA dimensions (W x H x D) (mm)
247 x 342 x 132
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
300 x 545 x 250
MTMA weight (kg)
≤ 10.5 (with brackets)
Packing weight (kg)
≤ 12.3
MTMA Volume (L)
11.2
AISG connector
Mounting
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
Mast diameter (mm)
Connector
40 - 135
6 x 4.3-10 Female ( Two ports are eNodeB and four ports are ANT)
466
Product
List
Product
Category
ATADU2024v06
MTMA-800/E900-12dB-2eNodeBport4ANTport-AISG
Unit : mm
467
Product
List
Product
Category
ATADU2017v06
MTMA-1800&2100-12dB-2BTSport2ANTport-AISG
Product Description
The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the
antenna to satisfy the co-location purposes. It helps to improve the signal-to-noise ratio and
enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power
used by cellphones and improves voice and data communication quality.
Features

High linearity and low noise performance.

Power failure bypass for high reliability.

Light weight and compact design.

Designed for co-location purposes.

Wall mounting and Pole mounting.

Built-in lightning protection up to 10 kA.

Support AISG 2.0 protocol.
Appearance and Block Diagram
468
Product
List
Product
Category
ATADU2017v06
MTMA-1800&2100-12dB-2BTSport2ANTport-AISG
Tx Specifications
Frequency range (MHz)
1805- 1880
2110 - 2170
Bandwidth (MHz)
75
60
Insertion loss (dB)
Typ. < 0.4
Typ. < 0.3
Return loss (dB)
≥ 18
Input power (W)
Intermodulation products in Rx band (dBc)
< 200 (+53 dBm) CW
< 2000 (+63 dBm) peak
< 200 (+53 dBm) CW
< 2000 (+63 dBm) peak
≤ -160 (3rd order; with 2 x 43 dBm)
≤ -160 (3rd order; with 2 x 43 dBm)
Rx Specifications
Frequency range (MHz)
1710 - 1785
Bandwidth (MHz)
1920-1980
75
60
≥ 18 (DC ON)
≥ 13 (DC OFF)
Return loss (dB)
Insertion loss in by-pass mode (dB)
Avg. ≤ 2 (DC OFF)
Gain (dB)
12 ±1
Noise figure (dB)
Typ. < 1.4
Typ. < 1.4
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 27
Electrical Specifications
AISG Mode (BTS0,BTS1)
DC supply voltage (V)
Operating current per TMA
(mA)
(without RET)
9 - 30
@12 V
Max. 310
@17 V
Max. 220
@30 V
Max. 130
Power consumption (W)
<4
Environmental Specification
Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
EN 301 489-1, EN 301 489-50
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
MTMA dimensions (W x H x D) (mm)
203 x 233 x 96
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
495 x 315 x 250
MTMA weight (kg)
≤ 6.4 (with brackets)
Packing weight (kg)
≤ 7.4
MTMA Volume (L)
4.5
AISG connector
Mounting
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Pole mounting
Pole diameter (mm)
Connector
40 - 135
4 x 4.3-10 Female ( Two ports are BTS and two ports are ANT)
469
Product
List
Product
Category
ATADU2017v06
MTMA-1800&2100-12dB-2BTSport2ANTport-AISG
Unit : mm
470
Product
List
Product
Category
ATADU2023v06
MTMA-1800/2100-12dB-2BTSport4ANTport-AISG
Product Description
The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the
antenna to satisfy the co-location purposes. It helps to improve the signal-to-noise ratio and
enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power
used by cellphones and improves voice and data communication quality. When scanning the AISG
ALD, the TMA is responding to the AISG controller with two individual serial numbers (unique IDs)
with each their two subunits (two subunits per frequency band).
Features

High linearity and low noise performance.

Power failure bypass for high reliability.

Light weight and compact design.

Designed for co-location purposes.

Wall mounting and mast mounting.

Built-in lightning protection up to 10 kA.

Support AISG 2.0 protocol.
Appearance and Block Diagram
471
Product
List
Product
Category
ATADU2023v06
MTMA-1800/2100-12dB-2BTSport4ANTport-AISG
Tx Specifications
Frequency range (MHz)
1805 - 1880
2110 - 2170
Bandwidth (MHz)
75
60
Insertion loss (dB)
Typ. < 0.45
Typ. < 0.35
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBc)
≤ -153 (3rd order; with 2 x 43 dBm)
≤ -165 (7th order; with 2 x 43 dBm)
Rx Specifications
Frequency range (MHz)
Bandwidth (MHz)
1710 - 1785
1920 - 1980
75
60
≥ 18 (DC ON)
≥ 14 (DC OFF)
Return loss (dB)
Insertion loss in by-pass mode (dB)
Typ. < 3.0
Gain (dB)
12 ±1
Noise figure (dB)
Typ. < 1.2
Typ. < 1.2
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Electrical Specifications
DC supply voltage (V)
Operating current per TMA
(mA)
(without RET)
9 - 30
@12 V
Max. 416
@17 V
Max. 294
@30 V
Max. 166
Alarm management
AISG
Power consumption (W)
< 5.0
Environmental Specification
Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
EN 301 489-1 , EN 301 489-50
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
MTMA dimensions (W x H x D) (mm)
196 x 280 x 110
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
245 x 475 x 220
MTMA weight (kg)
≤ 7.3 (with brackets)
Packing weight (kg)
≤ 8.5
MTMA Volume (L)
6.0
AISG connector
Mounting
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
Mast diameter (mm)
Connector
40 - 135
6 x 4.3-10 Female ( Two ports are BTS and four ports are ANT)
472
Product
List
Product
Category
ATADU2023v06
MTMA-1800/2100-12dB-2BTSport4ANTport-AISG
Unit : mm
473
Product
List
Product
Category
ATADU2015v06
MTMA-1800&2100/2600-12dB-2BTSport4ANTport-AISG
Product Description
The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the
antenna to satisfy the co-location purposes. It helps to improve the signal-to-noise ratio and
enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power
used by cellphones and improves voice and data communication quality. When scanning the AISG
ALD, the MTMA can be operated from one primary controller, either on BTS0 or BTS1 port. When
scanning the AISG ALD, the TMA is responding to the AISG controller with two individual serial
numbers (unique IDs) with each their two subunits (two subunits per frequency band).
Features

High linearity and low noise performance.

Power failure bypass for high reliability.

Light weight and compact design.

Designed for co-location purposes.

Wall mounting and mast mounting.

Built-in lightning protection up to 10 kA.

Support AISG 2.0 protocol.
Appearance and Block Diagram
474
Product
List
Product
Category
ATADU2015v06
MTMA-1800&2100/2600-12dB-2BTSport4ANTport-AISG
Tx Specifications
Frequency range (MHz)
1805 - 1880&2110 - 2170
2620 - 2690
Bandwidth (MHz)
75&60
70
Insertion loss (dB)
Typ. < 0.4&Typ. < 0.25
Typ. < 0.35
Return loss (dB)
≥ 18
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Input power (W)
Intermodulation products in Rx band (dBc)
≤ -160 (3rd order; with 2 x 43 dBm)
@1800M
≤ -165 (7th order; with 2 x 43 dBm)
@2100M
≤ -160 (3rd order; with 2 x 43
dBm) @2600M
Rx Specifications
Frequency range (MHz)
Bandwidth (MHz)
1710 - 1785&1920 - 1980
2500 - 2570
75&60
70
≥ 18 (DC ON)
≥ 13 (DC OFF)
Return loss (dB)
Insertion loss in by-pass mode (dB)
Typ. < 2.5
Gain (dB)
12 ±1
Noise figure (dB)
Typ. < 1.4 &Typ. < 1.4
Typ. < 1.5
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 27
Electrical Specifications
DC supply voltage (V)
Operating current per TMA (mA)
(without RET)
9 - 30
@12 V
Max. 250
@17 V
Max. 176
@30 V
Max. 100
Alarm management
AISG2.0
Power consumption (W)
< 3.0
Environmental Specification
Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
EN 301 489-1 , EN 301 489-50
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
MTMA dimensions (W x H x D) (mm)
252 x 236 x 95
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
405 x 305 x 210
MTMA weight (kg)
8.0
Packing weight (kg)
9.5
MTMA Volume (L)
AISG connector
Mounting
5.6
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
Mast diameter (mm)
Connector
40 - 135
6 x 4.3-10 Female ( Two ports are BTS and four ports are ANT)
475
Product
List
Product
Category
ATADU2015v06
MTMA-1800&2100/2600-12dB-2BTSport4ANTport-AISG
M8
Unit : mm
476
Product
List
Product
Category
ATADU2016v06
MTMA-700&800&900-12dB-2BTSport2ANTport-AISG
Product Description
The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the
antenna to satisfy the co-location purposes. It helps to improve the signal-to-noise ratio and
enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power
used by cellphones and improves voice and data communication quality.
Features

High linearity and low noise performance.

Power failure bypass for high reliability.

Light weight and compact design.

Designed for co-location purposes.

Wall mounting and pole mounting.

Built-in lightning protection up to 10 kA.

Support AISG 2.0 protocol.
Appearance and Block Diagram
477
Product
List
Product
Category
ATADU2016v06
MTMA-700&800&900-12dB-2BTSport2ANTport-AISG
Tx Specifications
Frequency range (MHz)
758 - 821
925 - 960
Bandwidth (MHz)
63
35
Insertion loss (dB)
Typ. < 0.4
Typ. < 0.4
Return loss (dB)
≥ 18
Input power (W)
Intermodulation products in Rx band (dBc)
< 200 (+53 dBm) CW
< 2000 (+63 dBm) peak
< 200 (+53 dBm) CW
< 2000 (+63 dBm) peak
≤ -160 (3rd order; with 2 x 43 dBm)
≤ -160 (3rd order; with 2 x 43 dBm)
Rx Specifications
Frequency range (MHz)
703 - 748
832 - 915
45
83
Bandwidth (MHz)
≥ 18 (DC ON)
≥ 13 (DC OFF)
Return loss (dB)
Insertion loss in by-pass mode (dB)
Avg. ≤ 2 (DC OFF)
Gain (dB)
12 ±1
Noise figure (dB)
Typ. < 1.3
Typ. < 1.3
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 27
Electrical Specifications
AISG Mode (BTS0,BTS1)
DC supply voltage (V)
Operating current per TMA
(mA)
(without RET)
9 - 30
@12 V
Max. 310
@17 V
Max. 220
@30 V
Max. 130
Power consumption (W)
<4
Environmental Specification
Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
EN 301 489-1, EN 301 489-50
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
MTMA dimensions (W x H x D) (mm)
256 x 296 x 126
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
315 x 495 x 250
MTMA weight (kg)
≤ 12 (with brackets)
Packing weight (kg)
≤ 13
MTMA Volume (L)
9.5
AISG connector
Mounting
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A,
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Pole mounting
Mast diameter (mm)
Connector
40 - 135
4 x 4.3-10 Female ( Two ports are BTS and two ports are ANT)
478
Product
List
Product
Category
ATADU2016v06
MTMA-700&800&900-12dB-2BTSport2ANTport-AISG
Unit : mm
479
Product
List
Product
Category
ATATR2002v06
MTMA-1800&2100&2600-12dB-2BTSport2ANTport-AISG
Product Description
The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the
antenna to satisfy the co-location purposes. It helps to improve the signal-to-noise ratio and
enhance the receiving sensitivity of the BTS system. It enhances the uplink coverage and reduces
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power
used by cellphones and improves voice and data communication quality. When scanning the AISG
ALD, the MTMA can be operated from one primary controller, either on BTS0 or BTS1 port. When
scanning the AISG ALD, the TMA is responding to the AISG controller with two individual serial
numbers (unique IDs) with each their two subunits (two subunits per frequency band).
Features

High linearity and low noise performance.

Power failure bypass for high reliability.

Light weight and compact design.

Designed for co-location purposes.

Wall mounting and mast mounting.

Built-in lightning protection up to 10 kA.

Support AISG 2.0 protocol.
Appearance and Block Diagram
ANT0
1800&2100&2600
ANT1
1800&2100&2600
Bias Tee &
Lightning Protection
RX2600
RX2100
Bias Tee
&Lightning Protection
RX1800
TX2600
RX1800
RX2100
Bias Tee &
Lightning protection
BTS 0
480
TX2600
Control
Circuit
&
Modem
LNA
RX1800
RS485
RX2600
TX2100
RX2600
TX1800
TX1800
LNA
RX2100
DC &OOK
RX1800
DC &OOK
RET_0
TX2100
LNA
RX2100
LNA
RX2600
Bias Tee &
Lightning protection
BTS 1
Product
List
Product
Category
ATATR2002v06
MTMA-1800&2100&2600-12dB-2BTSport2ANTport-AISG
Tx Specifications
1805 - 1880
2110 - 2170
2620 - 2690
Bandwidth (MHz)
Frequency range (MHz)
75
60
70
Insertion loss (dB)
Typ. < 0.4
Typ. < 0.25
Typ. < 0.35
Return loss (dB)
≥ 18
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Input power (W)
Intermodulation products
in Rx band (dBc)
≤ -160 (3rd order; with
2 x 43 dBm) @1800M
≤ -165 (7th order; with
2 x 43 dBm) @2100M
≤ -160 (3rd order; with
2 x 43 dBm) @2600M
Rx Specifications
Frequency range (MHz)
Bandwidth (MHz)
1710 - 1785
1920 - 1980
2500 - 2570
75
60
70
≥ 18 (DC ON)
≥ 13 (DC OFF)
Return loss (dB)
Insertion loss in by-pass mode (dB)
Typ. < 2.0
Typ. < 2.0
Gain (dB)
Typ. < 2.0
12(nominal)
Noise figure (dB)
Typ. <1.4
Typ. <1.4
Output 1dB compression (dBm)
Typ. < 1.4
≥ 12
OIP3 (dBm)
≥ 27
Electrical Specifications
DC supply voltage (V)
Operating current
per TMA (mA)
(without RET)
9 - 30
@12 V
Max. 250
@17 V
Max. 176
@30 V
Max. 100
Alarm management
AISG2.0
Power consumption (W)
< 3.0
Environmental Specification
Operating temperature range (℃)
-40 ... +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
EN 301 489-1 , EN 301 489-50
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
MTMA dimensions (W x H x D) (mm)
295 x 250 x 95
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
440 x 360 x 220
MTMA weight (kg)
9.5
Packing weight (kg)
10.5
MTMA Volume (L)
AISG connector
Mounting
7
8-pin female, IEC 60130-9 (pin6: 9V - 30V DC, pin3: RS485B, pin5: RS485A, pin7: DC
return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
Mast diameter (mm)
Connector
40 - 135
4 x 4.3-10 Female ( Two ports are BTS and two ports are ANT)
481
Product
List
Product
Category
ATATR2002v06
MTMA-1800&2100&2600-12dB-2BTSport2ANTport-AISG
M8
Unit : mm
482
Product
List
Product
Category
D-2. Combiner
Category
Dual-band
Combiner
Max. Input
power(W)
DC-Bypass
Band 1: 617-960/
Band 2: 1427-3800
200
All
DC-bypass
< -117
Band 1: 690-862/
Band 2: 880-960
200
Smart
DC-Bypass
Band 1: 690-862/
Band 2: 880-960
200
Band 1: 690-862/
Band 2: 880-960
Pass Band(MHz)
Intermodulation
Dimension (mm)
(dBm)
Model
Page
Double Unit:
112 x 148 x 95
ACOMD2A14v06
485
< -117
Double Unit:
103 x 196 x 143
ACOMD2S05v06
488
690-862MHz
DC-Bypass
< -117
Double Unit:
101 x 194 x 128
ACOMD2L11v06
491
200
880~960MHz
DC-bypass
< -117
Double Unit:
101 x 194 x 128
ACOMD2H25v06
491
Band 1: 690-862/
Band 2: 880-960
200
All
DC-bypass
< -117
Double Unit:
101 x 194 x 128
ACOMD2A07v06
491
Band 1: 690-803/
Band 2: 824-960
300
690~803MHz
DC-bypass
< -112
Double Unit:
200 x 230 x 107
ACOMD2L08v06
494
Band 1 : 698-960/
Band 2: 1710-2200
300
1710~2200MHz
DC-bypass
< -110
Double Unit:
130 x 190 x 105
ACOMD2H11v06
497
Band 1: 698-960 /
Band 2: 1710-2200
300
All
DC-bypass
< -110
Double Unit:
130 x 190 x 105
ACOMD2H19v06
500
Band 1: 698-960 /
Band 2: 1710-2700
300
1710~2700MHz
DC-bypass
< -110
Double Unit:
130 x 190 x 105
ACOMD2H00v06
503
Band 1: 698-960/
Band 2: 1710-2700
300
All
DC-bypass
< -110
Double Unit:
130 x 190 x 105
ACOMD2H22v06
503
Band 1: 1427-1880 /
Band 2: 1920-2200
200
Smart
DC-bypass
< -117
Double Unit:
131 x 120 x 109
ACOMD2S02v06
506
Band 1: 1427-1880 /
Band 2: 1920-2200
200
1920~2200MHz
DC-bypass
< -117
Double Unit:
131 x 120 x 94
ACOMD2H26v06
509
Band 1: 1427-1880 /
Band 2: 1920-2200
200
1427~1880MHz
DC-bypass
< -117
Double Unit:
131 x 120 x 94
ACOMD2L12v06
509
Band 1: 1427-1880 /
Band 2: 1920-2200
200
All
DC-bypass
< -117
Double Unit:
131 x 120 x 94
ACOMD2A06v06
509
Band 1: 17101755&2110-2155/
Band 2: 1850-1995
300
All
DC-bypass
< -110
Double Unit:
185 x 180 x 103
ACOMD2A00v06
512
Band 1: 1427-2200/
Band 2: 2300-2690
200
1427~2200MHz
DC-bypass
< -117
Double Unit:
122 x 125 x 98
ACOMD2L13v06
515
Band 1: 1427-2200/
Band 2: 2300-2690
200
2300-2690MHz
DC-bypass
< -117
Double Unit:
122 x 125 x 98
ACOMD2H27v06
515
Band 1: 1427-2200/
Band 2: 2300-2690
200
All
DC-bypass
< -117
Double Unit:
122 x 125 x 98
ACOMD2A08v06
515
Band 1: 1427-2200/
Band 2: 2300-2690
200
Smart
DC-bypass
< -117
Double Unit:
122 x 125 x 111
ACOMD2S03v06
518
483
Product
Category
Category
Tri-band
Combiner
Quad-band
Combiner
DC-STOP
Intermodulation
Dimension (mm)
(dBm)
Pass Band(MHz)
Max. Input
power(W)
DC-Bypass
Band 1: 690-960/
Band 2: 1710-1880/
Band 3: 1920-2200
300
All
DC-bypass
< -110
Band 1: 690-960/
Band 2: 1710-2200/
Band 3: 2300-2690
300
All
DC-bypass
Band 1: 790-862/
Band 2: 880-960/
Band 3: 1710-2700
300
Band 1: 790-960/
Band 2: 1710-1880/
Band 3: 1920-2200
Model
Page
Double Unit:
190 x 154 x 105
ACOMT2A03v06
521
< -110
Double Unit:
196 x 190 x 112
ACOMT2A04v06
524
All
DC-bypass
< -110
Double Unit:
220 x 210 x 115
ACOMT2A02v06
527
300
1920~2200MHz
DC-bypass
< -110
Double Unit:
190 x 154 x 105
ACOMT2H01v06
530
Band 1: 790-960/
Band 2: 1710-1880/
Band 3: 1920-2200
300
1710~1880MHz
DC-bypass
1920~2200MHz
DC-bypass
< -110
Double Unit:
190 x 154 x 105
ACOMT2H03v06
530
Band 1: 790-960/
Band 2: 1710-1880/
Band 3: 1920-2200
300
ALL
DC-bypass
< -110
Double Unit:
190 x 154 x 105
ACOMT2H08v06
530
Band 1: 1710-1880/
Band 2: 1920-2200/
Band 3: 2300-2690
300
1920~2200MHz
DC-bypass
< -110
Double Unit：
165 x 180 x 105
ACOMT2M02v06
533
Band 1: 690-960/
Band 2: 1710-2200/
Band 3: 2300-2690
300
All
DC-bypass
< -110
Double Unit：
165 x 180 x 105
ACOMT2A07v06
533
Band 1:
Band 2:
Band 3:
Band 4:
690-960/
1710-1880/
1920-2200/
2300-2690
300
1920~2200MHz
DC-bypass
< -110
Double Unit:
230 x 220 x 112
ACOMQ2M01v06
536
Band 1:
Band 2:
Band 3:
Band 4:
690-960/
1710-1880/
1920-2200/
2300-2690
300
All
DC-bypass
< -110
Double Unit:
230 x 220 x 112
ACOMQ2A01v06
536
Band 1:
Band 2:
Band 3:
Band 4:
690-862/
880-960/
1427-1880/
1920-2690
200
All
DC-bypass
< -117
Double Unit:
310 x 190 x 129
ACOMQ2A03v06
539
500
DC-Stop
< -117
32 x 70.3 x 37
ADCSTOP00v06
542
Band: 690-2700
484
Product
Category
ACOMD2A14v06
DC- 617-960/1427-3800-11
Product Description

Built-in lightning protection up to 10 kA.

Designed for co-antenna purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or mast mounting.

Environment IP67.
Block Diagram
DC/AISG By-pass
DC/AISG By-pass
Port3
Port1
Port2
1427 – 3800
617 - 960
ACOMD2A14v06
485
Product
List
Product
Category
ACOMD2A14v06
DC- 617-960/1427-3800-11
Electrical Properties
Model
ACOMD2A14v06
Band1
617-960
Band2
1427-3800
Port 1 ←→ Port 3
<0.15
Port 2 ←→ Port 3
<0.20
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Port 1 ←→ Port 2
>50
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
Isolation(dB)
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 200
Intermodulation products (dBc)
< -160 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification
Double Unit: 112 x 148 x 95
(without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
330 x 245x 220
Combiner weight (kg)
Double Unit: ≤ 3
Packing weight (kg)
≤4
Mounting
Wall mounting // Mast mounting
Mast diameter (mm)
Default: 40 - 135
Connector
4.3-10 Female
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL
calculate using the following formula: IL = Min. Frequency
+ 2 × IL
+ IL
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.
486
Product
List
Product
Category
ACOMD2A14v06
DC- 617-960/1427-3800-11
■
If the sign as shown above, it
indicates this pass band is DC stop.
If the sign as shown above, it
indicates this pass band is DC pass.
487
Unit : mm
Product
List
Product
Category
ACOMD2S05v06
DC-690-862/880-960-DS
Product Description

Smartly select the DC/AISG channel, and the combiner
module or the demultiplexing module is the same module;

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna;

Support for customer-defined configuration with handheld
terminal;

Designed for co-location purposes;

Feeder sharing available;

Built-in lightning protection up to 10 kA;

Suitable for indoor or outdoor applications.

Wall or pole mounting.
Block Diagram
ACOMD2S05v06
488
Product
List
Product
Category
ACOMD2S05v06
DC-690-862/880-960-DS
Electrical Properties
Model
ACOMD2S05v06
Band 1
690 - 862
Band 2
880- 960
Port 1 ←→ Port 3
< 0.2 (690 MHz - 862 MHz)
Port 2 ←→ Port 3
< 0.25 (880 MHz - 960 MHz)
Port 1 ←→ Port 3
Smart bypass (max. 2000 mA)
Port 2 ←→ Port 3
Smart bypass (max. 2000 mA)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
Isolation (dB)
> 50
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 200
Intermodulation products (dBc)
< -160 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
EMC
EN 55032:2015, EN 55035:2017
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Double Unit: 101 x 194 x 143
(without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
380 x 160 x 240
Combiner weight (kg)
Double Unit: ≤ 5.5
Packing weight (kg)
≤6
Wall mounting // Pole mounting
Mounting
Pole diameter (mm)
40 - 135
4.3-10 Female
Connector
Function Specification
Combine and split mode automatically selected
Mode choice
Smart DC/AISG bypass
DC/AISG input channel automatically selected
Output load automatically detected
Load detection
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
calculate using the following formula: IL =
IL
+ 2 × IL
+ IL
Min. Frequency
Mid. Frequency
Max. Frequency
4
489
Product
List
Product
Category
ACOMD2S05v06
DC-690-862/880-960-DS
Unit : mm
490
Product
List
Product
Category
ACOMD2A07v06 DC-690-862/880-960-11
ACOMD2L11v06 DC-690-862/880-960-10
ACOMD2H25v06 DC-690-862/880-960-01
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or Pole mounting.
Block Diagram
Port1
690-862
DC/AISG By-pass
DC/AISG By-pass
Port3
Port2
880-960
ACOMD2A07v06
ACOMD2L11v06
491
ACOMD2H25v06
Product
List
Product
Category
ACOMD2A07v06 DC-690-862/880-960-11
ACOMD2L11v06 DC-690-862/880-960-10
ACOMD2H25v06 DC-690-862/880-960-01
Electrical Properties
Model
ACOMD2A07v06
Band 1
690 - 862
Band 2
880 - 960
Port 1 ←→ Port 3
< 0.2 (690 MHz - 862 MHz)
Port 2 ←→ Port 3
< 0.25 (880 MHz - 960 MHz)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
ACOMD2L11v06
ACOMD2H25v06
Port 1 ←→ Port 3
By- pass (max. 2500 mA)
By- pass (max. 2500 mA)
stop
Port 2 ←→ Port 3
By- pass (max. 2500 mA)
stop
By- pass (max. 2500 mA)
Isolation (dB)
> 50
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 200
Intermodulation products (dBc)
< -160 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification
Double Unit： 101 x 194 x 128
(without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
380 x160 x 240
Combiner weight (kg)
Double Unit: ≤ 5.5
Packing weight (kg)
≤ 6.5
Wall mounting // Pole mounting
Mounting
Pole diameter (mm)
40 - 135
4.3-10 Female
Connector
*Insertion loss: IL* = Sum(v1+ v2 + .... + vn) , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL
calculate using the following formula: IL = Min. Frequency
+ 2 × IL
+ IL
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is
required.
492
Product
List
Product
Category
ACOMD2A07v06 DC-690-862/880-960-11
ACOMD2L11v06 DC-690-862/880-960-10
ACOMD2H25v06 DC-690-862/880-960-01
■
If the sign as shown above, it
indicates this pass band is DC stop.
If the sign as shown above, it
indicates this pass band is DC pass.
493
Unit : mm
Product
List
Product
Category
ACOMD2L08v06
DC-690-803/824-960-10
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or mast mounting.
Block Diagram
ACOMD2L08v06
494
Product
List
Product
Category
ACOMD2L08v06
DC-690-803/824-960-10
Electrical Properties
Model
ACOMD2L08v06
Band 1
690 - 803
Band 2
824 - 960
Port 1 ←→ Port 3
< 0.45 (690 MHz - 803 MHz)
Port 2 ←→ Port 3
< 0.45 (824 MHz - 960 MHz)
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
Stop
Pass band (MHz)
Insertion loss *(dB)
DC/AISG
transparency
Isolation (dB)
> 49.0
VSWR
< 1.22
Input power (W)
Port 1, Port 2
< 300
Intermodulation products (dBc)
< -155 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification
Double Unit: 200 x 230 x 107
(without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
335 x 405 x 265
Combiner weight (kg)
Double Unit: ≤ 7.9
Packing weight (kg)
≤ 9.4
Wall mounting // Mast mounting
Mounting
Mast diameter (mm)
40 - 135
4.3-10 Female
Connector
*Insertion loss:
Sum(v1+ v2 + .... + vn)
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
IL* =
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
calculate using the following formula:
IL =
IL
+ 2 × IL
+ IL
Min. Frequency
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.
495
Product
List
Product
Category
ACOMD2L08v06
DC-690-803/824-960-10
M8
If the sign as shown above,
it indicates this pass band
is DC by-pass.
If the sign as shown above,
it indicates this pass band
is DC stop.
Unit : mm
496
Product
List
Product
Category
ACOMD2H11v06
DC-698-960/1710-2200-01
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or mast mounting.
Block Diagram
ACOMD2H11v06
497
Product
List
Product
Category
ACOMD2H11v06
DC-698-960/1710-2200-01
Electrical Properties
Model
ACOMD2H11v06
Band 1
698 - 960
Band 2
1710 - 2200
Port 1 ←→ Port 3
< 0.15 (698 MHz - 960 MHz)
Port 2 ←→ Port 3
< 0.15 (1710 MHz - 2200 MHz)
Port 1 ←→ Port 3
Stop
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
Isolation (dB)
> 40
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 300
Intermodulation products (dBc)
< -153 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification
Double Unit: 130 x 190 x 105
(without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
175 x 355 x 220
Combiner weight (kg)
Double Unit: ≤ 5.6
Packing weight (kg)
≤ 6.2
Wall mounting // Mast mounting
Mounting
Mast diameter (mm)
40 - 135
4.3-10 Female
Connector
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL
calculate using the following formula: IL = Min. Frequency
+ 2 × IL
+ IL
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.
498
Product
List
Product
Category
ACOMD2H11v06
DC-698-960/1710-2200-01
If the sign as shown above,
it indicates this pass band
is DC by-pass.
If the sign as shown above,
it indicates this pass band
is DC stop.
Unit : mm
499
Product
List
Product
Category
ACOMD2H19v06
DC-698-960/1710-2200-11
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or mast mounting.
Block Diagram
ACOMD2H19v06
500
Product
List
Product
Category
ACOMD2H19v06
DC-698-960/1710-2200-11
Electrical Properties
Model
ACOMD2H19v06
Band 1
698 - 960
Band 2
1710 - 2200
Port 1 ←→ Port 3
< 0.15 (698 MHz - 960 MHz)
Port 2 ←→ Port 3
< 0.15 (1710 MHz - 2200 MHz)
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
Isolation (dB)
> 40
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 300
Intermodulation products (dBc)
< -153 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 130 x 190 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
175 x 355 x 220
Combiner weight (kg)
Double Unit: ≤ 5.6
Packing weight (kg)
≤ 6.2
Wall mounting // Mast mounting
Mounting
Mast diameter (mm)
40 - 135
4.3-10 Female
Connector
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
calculate using the following formula: IL =
IL
+ 2 × IL
+ IL
Min. Frequency
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.
501
Product
List
Product
Category
ACOMD2H19v06
DC-698-960/1710-2200-11
If the sign as shown above,
it indicates this pass band
is DC by-pass.
If the sign as shown above,
it indicates this pass band
is DC stop.
Unit : mm
502
Product
List
Product
Category
ACOMD2H00v06 DC-698-960/1710-2700-01
ACOMD2H22v06 DC-698-960/1710-2700-11
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or mast mounting.
Block Diagram
ACOMD2H00v06
ACOMD2H22v06
503
Product
List
Product
Category
ACOMD2H00v06 DC-698-960/1710-2700-01
ACOMD2H22v06 DC-698-960/1710-2700-11
Electrical Properties
Model
ACOMD2H00v06
Band 1
698 - 960
Band 2
1710 - 2700
Port 1 ←→ Port
3
< 0.15 (698 MHz - 960 MHz)
Port 2 ←→ Port
3
< 0.15 (1710 MHz - 2700 MHz)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
ACOMD2H22v06
Port 1 ←→ Port
3
Stop
By-pass (max. 2500 mA)
Port 2 ←→ Port
3
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
Isolation (dB)
> 40
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 300
Intermodulation products (dBc)
< -153 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D)
(mm)
Double Unit: 130 x 190 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
175 x 355 x 220
Combiner weight (kg)
Double Unit: ≤ 4.2
Packing weight (kg)
≤ 4.7
Wall mounting // Mast mounting
Mounting
Mast diameter (mm)
40 - 135
4.3-10 Female
Connector
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL
calculate using the following formula: IL = Min. Frequency
+ 2 × IL
+ IL
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.
504
Product
List
Product
Category
ACOMD2H00v06 DC-698-960/1710-2700-01
ACOMD2H22v06 DC-698-960/1710-2700-11
If the sign as shown above,
it indicates this pass band
is DC by-pass.
If the sign as shown above,
it indicates this pass band
is DC stop.
Unit : mm
505
Product
List
Product
Category
ACOMD2S02v06
DC-1427-1880/1920-2200-DS
Product Description

Built-in lightning protection up to 10 kA;

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna;

Automatically recognizes the port DC / AISG, and the
combiner module or the demultiplexing module is the same
module;

Support for customer-defined configuration with handheld
terminal;

Designed for co-location purposes;

Feeder sharing available;

Suitable for indoor or outdoor applications.
Block Diagram
ACOMD2S02v06
506
Product
List
Product
Category
ACOMD2S02v06
DC-1427-1880/1920-2200-DS
Electrical Properties
Model
ACOMD2S02v06
Band 1
1427 - 1880
Band 2
1920 - 2200
Port 1 ←→ Port 3
< 0.15
Port 2 ←→ Port 3
< 0.15
DC/AISG
transparency
Port 1 ←→ Port 3
Smart-bypass (max. 2000 mA)
Port 2 ←→ Port 3
Smart-bypass (max. 2000 mA)
Isolation (dB)
Port 1 ←→ Port 2
> 50
Pass band (MHz)
Insertion loss* (dB)
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 200
Intermodulation products (dBc)
< -160 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
EMC
EN 55032:2015, EN 55035:2017
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Double Unit: 131 x 120 x 109
(without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
185 x 280 x 195
Combiner weight (kg)
Double Unit: ≤ 3.6
Packing weight (kg)
≤ 4.8
Mounting
Wall mounting // Pole mounting
Pole diameter (mm)
40 - 135
Connector
4.3-10 Female
Function Specification
Mode choice
Combine and split mode automatically selected
Smart DC/AISG bypass
DC/AISG input channel automatically selected
Load detection
Output load automatically detected
*Insertion loss: IL* = Sum(v1+ v2 + .... + vn) , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
calculate using the following formula: IL =
IL
+ 2 × IL
+ IL
Min. Frequency
Mid. Frequency
Max. Frequency
4
507
Product
List
Product
Category
ACOMD2S02v06
DC-1427-1880/1920-2200-DS
Unit : mm
508
Product
List
Product
Category
ACOMD2A06v06 DC-1427-1880/1920-2200-11
ACOMD2L12v06 DC-1427-1880/1920-2200-10
ACOMD2H26v06 DC-1427-1880/1920-2200-01
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a
reciprocal function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or Pole mounting.
Block Diagram
Port1
1427 - 1880
DC/AISG By-pass
DC/AISG By-pass
Port3
Port2
1920 - 2200
ACOMD2A06v06
ACOMD2L12v06
509
ACOMD2H26v06
Product
List
Product
Category
ACOMD2A06v06 DC-1427-1880/1920-2200-11
ACOMD2L12v06 DC-1427-1880/1920-2200-10
ACOMD2H26v06 DC-1427-1880/1920-2200-01
Electrical Properties
Model
ACOMD2A06v06
Band 1
1427 - 1880
Band 2
1920 - 2200
Port 1 ←→ Port 3
< 0.15 (1427 MHz - 1880 MHz)
Port 2 ←→ Port 3
< 0.15 (1920 MHz - 2200 MHz)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
ACOMD2L12v06
ACOMD2H26v06
Port 1 ←→ Port 3
By- pass (max. 2500 mA)
By- pass (max. 2500 mA)
stop
Port 2 ←→ Port 3
By- pass (max. 2500 mA)
stop
By- pass (max. 2500 mA)
Isolation (dB)
> 50
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 200
Intermodulation products (dBc)
< -160 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification
Double Unit： 131 x 120 x 94
(without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
280 x185 x 195
Combiner weight (kg)
Double Unit: ≤ 3.5
Packing weight (kg)
≤ 4.5
Wall mounting // Pole mounting
Mounting
Pole diameter (mm)
40 - 135
4.3-10 Female
Connector
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL
calculate using the following formula: IL = Min. Frequency
+ 2 × IL
+ IL
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is
required.
510
Product
List
Product
Category
ACOMD2A06v06 DC-1427-1880/1920-2200-11
ACOMD2L12v06 DC-1427-1880/1920-2200-10
ACOMD2H26v06 DC-1427-1880/1920-2200-01
M8
■
If the sign as shown above, it
indicates this pass band is DC
stop.
If the sign as shown above, it
indicates this pass band is DC pass.
Unit : mm
511
Product
List
Product
Category
ACOMD2A00v06
DC-1710-1755&2110-2155/1850-1995-11
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or mast mounting.
Block Diagram
ACOMD2A00v06
512
Product
List
Product
Category
ACOMD2A00v06
DC-1710-1755&2110-2155/1850-1995-11
Electrical Properties
Model
ACOMD2A00v06
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
Band 1 (AWS)
1710 - 1755 & 2110 - 2155
Band 2 (PCS)
1850 -1995
Port 1 ←→ Port 3
< 0.3 (1710 MHz - 1755 MHz & 2110 MHz - 2155 MHz)
Port 2 ←→ Port 3
< 0.3 (1850 MHz - 1995 MHz)
Port 1 ←→ Port 3
By - pass (max. 2500 mA)
Port 2 ←→ Port 3
By - pass (max. 2500 mA)
Isolation (dB)
> 35
VSWR
< 1.25
Input power (W)
Port 1, Port 2
< 300
Intermodulation products (dBc)
< -153 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification
Double Unit: 185 x 180 x 103
(without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
260 x 380 x 215
Combiner weight (kg)
Double Unit: ≤ 6.8
Packing weight (kg)
≤ 7.7
Wall mounting // Mast mounting
Mounting
Mast diameter (mm)
40 - 135
4.3-10 Female
Connector
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL
calculate using the following formula: IL = Min. Frequency
+ 2 × IL
+ IL
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is
required.
513
Product
List
Product
Category
ACOMD2A00v06
DC-1710-1755&2110-2155/1850-1995-11
M6
If the sign as shown
above, it indicates this
pass band is DC by-pass.
If the sign as shown
above, it indicates this
pass band is DC stop.
Unit : mm
514
Product
List
Product
Category
ACOMD2A08v06 DC-1427-2200/2300-2690-11
ACOMD2L13v06 DC-1427-2200/2300-2690-10
ACOMD2H27v06 DC-1427-2200/2300-2690-01
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or Pole mounting.
Block Diagram
ACOMD2A08v06
ACOMD2L13v06
515
ACOMD2H27v06
Product
List
Product
Category
ACOMD2A08v06 DC-1427-2200/2300-2690-11
ACOMD2L13v06 DC-1427-2200/2300-2690-10
ACOMD2H27v06 DC-1427-2200/2300-2690-01
Electrical Properties
Model
ACOMD2A08v06
Band 1
1427 - 2200
Band 2
2300 - 2690
Port 1 ←→ Port
3
< 0.15 (1427 MHz - 2200 MHz)
Port 2 ←→ Port
3
< 0.15 (2300 MHz - 2690 MHz)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
ACOMD2L13v06
ACOMD2H27v06
Port 1 ←→ Port
3
By- pass (max. 2500 mA)
By- pass (max. 2500 mA)
stop
Port 2 ←→ Port
3
By- pass (max. 2500 mA)
stop
By- pass (max. 2500
mA)
Isolation (dB)
> 50
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 200
Intermodulation products (dBc)
< -160 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit： 122 x 125 x 98
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
280 x185 x 195
Combiner weight (kg)
Double Unit: ≤ 3.5
Packing weight (kg)
≤ 4.5
Wall mounting // Pole mounting
Mounting
Pole diameter (mm)
40 - 135
Connector
4.3-10 Female
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
,V1,V2…Vn-1 is the IL-value for each 5M in the passband from low frequency, Vn is the
n
IL-value for high frequency. If n < 4,
IL =
IL
+ 2 × IL
+ IL
Min. Frequency
Mid. Frequency
Max. Frequency
4
**Lightning protection: In normal instance, the combiner share the GND protection systems with feeders and no need another GND
cable.
516
Product
List
Product
Category
ACOMD2A08v06 DC-1427-2200/2300-2690-11
ACOMD2L13v06 DC-1427-2200/2300-2690-10
ACOMD2H27v06 DC-1427-2200/2300-2690-01
■
If the sign as shown above, it
indicates this pass band is DC stop.
If the sign as shown above, it
indicates this pass band is DC pass.
517
Unit : mm
Product
List
Product
Category
ACOMD2S03v06
DC-1427-2200/2300-2690-DS
Product Description

Built-in lightning protection up to 10 kA;

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna;

Automatically recognizes the port DC / AISG, and the
combiner module or the demultiplexing module is the same
module;

Support for customer-defined configuration with handheld
terminal;

Designed for co-location purposes;

Feeder sharing available;

Suitable for indoor or outdoor applications.
Block Diagram
ACOMD2S03v06
518
Product
List
Product
Category
ACOMD2S03v06
DC-1427-2200/2300-2690-DS
Electrical Properties
Model
ACOMD2S03v06
Band 1
1427 - 2200
Band 2
2300 - 2690
Port 1 ←→ Port 3
< 0.15 (1427 - 2200)
Port 2 ←→ Port 3
< 0.15 (2300 - 2690)
DC/AISG
transparency
Port 1 ←→ Port 3
Smart-bypass (max. 2000 mA)
Port 2 ←→ Port 3
Smart-bypass (max. 2000 mA)
Isolation (dB)
Port 1 ←→ Port 2
> 50
Pass band (MHz)
Insertion loss* (dB)
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 200
Intermodulation products (dBc)
< -160 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
EMC
EN 55032:2015, EN 55035:2017
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 122 x 125 x 113
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
185 x 280 x 195
Combiner weight (kg)
Double Unit: ≤ 3.5
Packing weight (kg)
≤ 4.8
Mounting
Wall mounting // Pole mounting
Pole diameter (mm)
40 - 135
Connector
4.3-10 Female
Function Specification
Mode choice
Combine and split mode automatically selected
Smart DC/AISG bypass
DC/AISG input channel automatically selected
Load detection
Output load automatically detected
*Insertion loss: IL* = Sum(v1+ v2 + .... + vn) , V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
calculate using the following formula: IL =
IL
+ 2 × IL
+ IL
Min. Frequency
Mid. Frequency
Max. Frequency
4
519
Product
List
Product
Category
ACOMD2S03v06
DC-1427-2200/2300-2690-DS
Unit : mm
520
Product
List
Product
Category
ACOMT2A03v06
TC-690-960/1710-1880/1920-2200-111
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or mast mounting.
Block Diagram
Port1
690 - 960
DC/AISG By-pass
DC/AISG By-pass
DC/AISG By-pass
Port4
Port2
1710 - 1880
Port3
1920 - 2200
ACOMT2A03v06
521
Product
List
Product
Category
ACOMT2A03v06
TC-690-960/1710-1880/1920-2200-111
Electrical Properties
Model
ACOMT2A03v06
Band 1
690 - 960
Band 2
1710 - 1880
Band 3
1920 - 2200
Port 1 ←→ Port 4
< 0.15 (690 MHz - 960 MHz)
Port 2 ←→ Port 4
< 0.25 (1710 MHz - 1880 MHz)
Port 3 ←→ Port 4
< 0.25 (1920 MHz - 2200 MHz)
Port 1 ←→ Port 4
By-pass (max. 2500 mA)
Port 2 ←→ Port 4
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2, Port3
< 300
Intermodulation products (dBc)
< -153 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 190 x 154 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
245 x 330 x 220
Combiner weight (kg)
Double Unit: ≤ 7.0
Packing weight (kg)
≤ 7.9
Wall mounting // Mast mounting
Mounting
Mast diameter (mm)
40 - 135
Connector
4.3-10 Female
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
calculate using the following formula: IL =
IL
+ 2 × IL
+ IL
Min. Frequency
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.
522
Product
List
Product
Category
ACOMT2A03v06
TC-690-960/1710-1880/1920-2200-111
If the sign as shown above,
it indicates this pass band
is DC by-pass.
If the sign as shown above,
it indicates this pass band
is DC stop.
Unit : mm
523
Product
List
Product
Category
ACOMT2A04v06
TC-690-960/1710-2200/2300-2690-111
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or mast mounting.
Block Diagram
Port1
690 - 960
DC/AISG By-pass
DC/AISG By-pass
DC/AISG By-pass
Port4
Port2
1710 - 2200
Port3
2300 - 2690
ACOMT2A04v06
524
Product
List
Product
Category
ACOMT2A04v06
TC-690-960/1710-2200/2300-2690-111
Electrical Properties
Model
ACOMT2A04v06
Band 1
690 - 960
Band 2
1710 - 2200
Band 3
2300 - 2690
Port 1 ←→ Port 4
< 0.15 (690 MHz - 960 MHz)
Port 2 ←→ Port 4
< 0.2 (1710 MHz - 2200 MHz)
Port 3 ←→ Port 4
< 0.2 (2300 MHz - 2690 MHz)
Port 1 ←→ Port 4
By-pass (max. 2500 mA)
Port 2 ←→ Port 4
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2, Port3
< 300
Intermodulation products (dBc)
< -153 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 196 x 190 x 112
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
335 x 405 x 265
Combiner weight (kg)
Double Unit: ≤ 7.0
Packing weight (kg)
≤ 7.9
Wall mounting // Mast mounting
Mounting
Mast diameter (mm)
40 - 135
4.3-10 Female
Connector
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
calculate using the following formula: IL =
IL
+ 2 × IL
+ IL
Min. Frequency
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.
525
Product
List
Product
Category
ACOMT2A04v06
TC-690-960/1710-2200/2300-2690-111
If the sign as shown above,
it indicates this pass band
is DC by-pass.
If the sign as shown above,
it indicates this pass band
is DC stop.
Unit : mm
526
Product
List
Product
Category
ACOMT2A02v06
TC-790-862/880-960/1710-2700-111
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or mast mounting.
Block Diagram
Port1
790 - 862
DC/AISG By-pass
DC/AISG By-pass
DC/AISG By-pass
Port4
Port2
880 - 960
Port3
1710 - 2700
ACOMT2A02v06
527
Product
List
Product
Category
ACOMT2A02v06
TC-790-862/880-960/1710-2700-111
Electrical Properties
Model
ACOMT2A02v06
Band 1
790 - 862
Band 2
880 - 960
Band 3
1710 - 2700
Port 1 ←→ Port 4
< 0.3 (790 MHz - 862 MHz)
Port 2 ←→ Port 4
< 0.3 (880 MHz - 960 MHz)
Port 3 ←→ Port 4
< 0.15 (1710 MHz - 2700 MHz)
Port 1 ←→ Port 4
By-pass (max. 2500 mA)
Port 2 ←→ Port 4
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
Port 1 ←→ Port 2
> 47
Port 2 ←→ Port 3
> 50
Port 1 ←→ Port 3
> 50
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
Isolation (dB)
VSWR
< 1.28
Input power (W)
Port 1, Port 2, Port3
< 300
Intermodulation products (dBc)
< -153 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // outdoor
Application scene
IP67
IP rating
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification
Dimensions (W x H x D) (mm)
Double Unit: 220 x 210 x 115
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
335 x 405 x 265
Combiner weight (kg)
Double Unit: ≤ 7.5
Packing weight (kg)
≤ 8.4
Wall mounting // Mast mounting
Mounting
Mast diameter (mm)
40 - 135
Connector
4.3-10 Female
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
calculate using the following formula: IL =
IL
+ 2 × IL
+ IL
Min. Frequency
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.
528
Product
List
Product
Category
ACOMT2A02v06
TC-790-862/880-960/1710-2700-111
If the sign as shown above,
it indicates this pass band
is DC by-pass.
If the sign as shown above,
it indicates this pass band
is DC stop.
Unit : mm
529
Product
List
Product
Category
ACOMT2H01v06 TC-790-960/1710-1880/1920-2200-001
ACOMT2H03v06 TC-790-960/1710-1880/1920-2200-011
ACOMT2H08v06 TC-790-960/1710-1880/1920-2200-111
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or mast mounting.
Block Diagram
ACOMT2H01v06
ACOMT2H03v06
530
ACOMT2H08v06
Product
List
Product
Category
ACOMT2H01v06 TC-790-960/1710-1880/1920-2200-001
ACOMT2H03v06 TC-790-960/1710-1880/1920-2200-011
ACOMT2H08v06 TC-790-960/1710-1880/1920-2200-111
Electrical Properties
Model
ACOMT2H01v06
DC/AISG
transparency
ACOMT2H08v06
Band 1
790 - 960
Band 2
1710 - 1880
Band 3
1920 - 2200
Port 1 ←→ Port 4
< 0.15 (790 MHz - 960 MHz)
Port 2 ←→ Port 4
< 0.25 (1710 MHz - 1880 MHz)
Port 3 ←→ Port 4
< 0.25 (1920 MHz - 2200 MHz)
Pass band (MHz)
Insertion loss* (dB)
ACOMT2H03v06
Port 1 ←→ Port 4
Stop
Stop
By-pass (max. 2500 mA)
Port 2 ←→ Port 4
Stop
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2,
Port3
< 300
Intermodulation products (dBc)
< -153 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 190 x 154 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
245 x 330 x 220
Combiner weight (kg)
Double Unit: ≤ 5.6
Packing weight (kg)
≤ 6.2
Wall mounting // Mast mounting
Mounting
Mast diameter (mm)
40 - 135
4.3-10 Female
Connector
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
calculate using the following formula: IL =
IL
+ 2 × IL
+ IL
Min. Frequency
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.
531
Product
List
Product
Category
ACOMT2H01v06 TC-790-960/1710-1880/1920-2200-001
ACOMT2H03v06 TC-790-960/1710-1880/1920-2200-011
ACOMT2H08v06 TC-790-960/1710-1880/1920-2200-111
If the sign as shown above,
it indicates this pass band
is DC by-pass.
If the sign as shown above,
it indicates this pass band
is DC stop.
Unit : mm
532
Product
List
Product
Category
ACOMT2M02v06 TC-1710-1880/1920-2200/2300-2690-010
ACOMT2A07v06 TC-1710-1880/1920-2200/2300-2690-111
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or mast mounting.
Block Diagram
ACOMT2A07v06
ACOMT2M02v06
533
Product
List
Product
Category
ACOMT2M02v06 TC-1710-1880/1920-2200/2300-2690-010
ACOMT2A07v06 TC-1710-1880/1920-2200/2300-2690-111
Electrical Properties
Model
ACOMT2M02v06
Band 1
1710 - 1880
Band 2
1920 - 2200
Band 3
2300 - 2690
Port 1 ←→ Port 4
< 0.2 (1710 MHz - 1880 MHz)
Port 2 ←→ Port 4
< 0.2 (1920 MHz - 2200 MHz)
Port 3 ←→ Port 4
< 0.15 (2300 MHz - 2690 MHz)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
ACOMT2A07v06
Port 1 ←→ Port 4
Stop
By- pass (max. 2500 mA)
Port 2 ←→ Port 4
By- pass (max. 2500 mA)
By- pass (max. 2500 mA)
Port 3 ←→ Port 4
Stop
By- pass (max. 2500 mA)
Isolation (dB)
> 50
VSWR
< 1.28
Input power (W)
Port 1, Port 2,Port 3
< 300
Intermodulation products (dBc)
< -160 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
Lightning protection** (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 165 x 180 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
225 x 380 x 220
Combiner weight (kg)
Double Unit: ≤ 5
Packing weight (kg)
≤6
Wall mounting // Mast mounting
Mounting
Mast diameter (mm)
40 - 135
4.3-10 Female
Connector
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
calculate using the following formula: IL =
IL
+ 2 × IL
+ IL
Min. Frequency
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.
534
Product
List
Product
Category
ACOMT2M02v06 TC-1710-1880/1920-2200/2300-2690-010
ACOMT2A07v06 TC-1710-1880/1920-2200/2300-2690-111
■
If the sign as shown above, it
indicates this pass band is DC stop.
If the sign as shown above, it
indicates this pass band is DC pass.
Unit : mm
535
Product
List
Product
Category
ACOMQ2A01v06 QC-690-960/1710-1880/1920-2200/2300-2690-1111
ACOMQ2M01v06 QC-690-960/1710-1880/1920-2200/2300-2690-0010
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or mast mounting
Block Diagram
Port1
690 - 960
Port5
Port2
1710 - 1880
Port3
1920 - 2200
DC/AISG By-pass
DC/AISG By-pass
DC/AISG By-pass
DC/AISG By-pass
DC/AISG By-pass
Port5
Port4
Port1
2300 - 2690
690 - 960
ACOMQ2A01v06
Port2
1710 - 1880
Port3
1920 - 2200
Port4
2300 - 2690
ACOMQ2M01v06
536
Product
List
Product
Category
ACOMQ2A01v06 QC-690-960/1710-1880/1920-2200/2300-2690-1111
ACOMQ2M01v06 QC-690-960/1710-1880/1920-2200/2300-2690-0010
Electrical Properties
Model
ACOMQ2A01v06
Band 1
690 - 960
Band 2
1710 - 1880
Band 3
1920 - 2200
Band 4
2300 - 2690
Port 1 ←→ Port 5
< 0.15 (690 MHz - 960 MHz)
Port 2 ←→ Port 5
< 0.25 (1710 MHz - 1880 MHz)
Port 3 ←→ Port 5
< 0.25 (1920 MHz - 2200 MHz)
Port 4 ←→ Port 5
< 0.20 (2300 MHz - 2690 MHz)
Pass band (MHz)
Insertion loss* (dB)
DC/AISG
transparency
ACOMQ2M01v06
Port 1 ←→ Port 5
By- pass (max. 2500 mA)
Stop
Port 2 ←→ Port 5
By- pass (max. 2500 mA)
Stop
Port 3 ←→ Port 5
By- pass (max. 2500 mA)
By- pass (max. 2500 mA)
Port 4 ←→ Port 5
By- pass (max. 2500 mA)
Stop
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Port 3, Port 4
< 300
Intermodulation products (dBc)
< -153 (3rd order; with 2 x 43 dBm)
Environmental Specification
-40 … +65
Operating temperature (℃)
Indoor // Outdoor
Application scene
IP67
IP rating
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 230 x 220 x 112
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
335 x 405 x 265
Combiner weight (kg)
Double Unit: ≤ 9
Packing weight (kg)
≤ 10
Wall mounting // Mast mounting
Mounting
Mast diameter (mm)
40 - 135
4.3-10 Female
Connector
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
calculate using the following formula: IL =
IL
+ 2 × IL
+ IL
Min. Frequency
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.
537
Product
List
Product
Category
ACOMQ2A01v06 QC-690-960/1710-1880/1920-2200/2300-2690-1111
ACOMQ2M01v06 QC-690-960/1710-1880/1920-2200/2300-2690-0010
■
If the sign as shown
above, it indicates this
pass band is DC pass.
If the sign as shown
above, it indicates this
pass band is DC stop.
Unit : mm
538
Product
List
Product
Category
ACOMQ2A03v06
QC-690-862/880-960/1427-1880/1920-2690-1111
Product Description

Built-in lightning protection up to 10 kA.

Can be used as a combiner near the BTS

Can provide anti-interference rejection capability

Designed for co-location purposes.

Feeder sharing available.

Suitable for indoor or outdoor applications.

Wall or Pole mounting.
Block Diagram
ACOMQ2A03v06
539
Product
List
Product
Category
ACOMQ2A03v06
QC-690-862/880-960/1427-1880/1920-2690-1111
Electrical Properties
Model
ACOMQ2A03v06
Pass band (MHz)
Insertion loss (dB)
Band1
690 – 862
Band2
880 - 960
Band3
1427 - 1880
Band4
1920 - 2690
Port1 ←→ Port5
< 0.25 (690 - 862MHz)
Port2 ←→ Port5
< 0.30 (880 - 960MHz)
Port3 ←→ Port5
< 0.20 (1427 - 1880MHz)
Port 4 ←→ Port5
< 0.25 (1920 - 2690MHz)
Port 1 ←→ Port 5
Port 2 ←→ Port 5
DC/AISG
transparency
By-pass ( max.2500mA)
Port 3 ←→ Port 5
Port 4 ←→ Port 5
Port 1 ←→ Port 2
Port 1 ←→ Port 3
Port 1 ←→ Port 4
Isolation (dB)
> 45
Port 2 ←→ Port 3
Port 2 ←→ Port 4
Port 3 ←→ Port 4
VSWR
Input power (W)
< 1.28
Port 1, Port 2, Port 3, Port 4
< 200
Intermodulation products (dBc)
< -160 (3rd order with 2 x43 dBm)
Environmental Specification
Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Double Unit: 310 x 190 x 129
(without connectors, without mounting brackets)
Combiner dimensions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
430 x 400 x 260
Combiner weight (kg)
Double Unit：≤ 12
Packing weight (kg)
≤ 13
Mounting
Wall mounting // Mast mounting
Mast diameter (mm)
Default: 40 - 135
Connector
4.3-10 Female
540
Product
List
Product
Category
ACOMQ2A03v06
QC-690-862/880-960/1427-1880/1920-2690-1111
Unit : mm
541
Product
List
Product
Category
ADCSTOP00v06
DC-STOP 690-2700
Features

Used to isolate DC voltage from port 1 to port 2.

Low passive intermodulation products, low insertion loss
and high power capacity.

Ultra wide band design for various communication system.

Small volume, light weight.
Dimension figure
542
Product
List
Product
Category
ADCSTOP00v06
DC-STOP 690-2700
Electrical Properties
Model
ADCSTOP00v06
Frequency range (MHz)
690 - 2700
Insertion loss *(dB)
Port 1 ←→ Port
2
≤ 0.1 (690 - 960 MHz // 1710 - 2700 MHz)
≤ 0.15 (960 - 1710 MHz)
Isolation for DC signal (dB)
Port 1 ←→ Port
2
≥ 70
VSWR
Port 1, Port 2
≤ 1.15 (690 - 960 MHz // 1710 - 2700 MHz)
≤ 1.2 (960 - 1710 MHz)
Input power (W)
Port 1, Port 2
Avg. ≥ 500 (690 - 2700 MHz)
RF Impedance (Ω)
50
Intermodulation products (dBc)
< -160 (2 x 43 dBm carrier)
Environmental Specification
Operating temperature (℃)
-40 … +70
Application scene
Indoor or outdoor
IP rating
IP66
Lightning protection * * (kA)
3 (10/350 us)
Mechanical Specification
32 x 74 x 37
(with connectors and ground screw)
DC-STOP dimensions (W x H x D) (mm)
50 x 82 x 50
Packing dimensions (W x H x D) (mm)
DC-STOP net weight (kg)
< 0.32
Packing weight (kg)
< 0.45
Connectors
Port 1
4.3-10 Male
Port 2
4.3-10 Female
Sum(v1+ v2 + .... + vn)
*Insertion loss: IL* =
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the
n
passband from low to high frequencies. Vn is the insertion loss value for the highest frequency. If n is less than 4,
IL
calculate using the following formula: IL = Min. Frequency
+ 2 × IL
+ IL
Mid. Frequency
Max. Frequency
4
**Lightning protection: Generally, combiners share the same grounding system with feeders, and no separate PGND cable is required.
543
Product
List
Product
Category
E. Bracket & Installation Guide
E-1. Bracket
E - 1 - 1. Tri-sector Bracket
Bracket Type
Maximum Width
Weight (Kg)
of Antenna (mm)
Dimension (mm)
Model
Page
TSC-S (3 Sector Clamp-Small)
<280
5.8
88.9mm (3.5inch)
ASMC00001
TSC-M (3 Sector Clamp-Medium)
<380
6.3
114.3mm (4.5inch)
ASMC00002
TSC-L (3 Sector Clamp-Large)
<400
6.6
139.7mm (5.5inch)
ASMC00003
TSC-XL (3 Sector Clamp-Extra Large)
<500
15.8
114.3mm (4.5inch)
ASMC00004
TSC-XL (3 Sector Clamp-Extra Large)
<500
16.3
139.7mm (5.5inch)
ASMC00005
546
546
546
547
547
Bracket Type
Antenna bases
distance (m)
Weight(Kg)
Packing dimensions
(H x W x D) (mm)
Model
Page
Downtilt Kit-A(Wind load Category “Light”)
0.7/1.4/2.0
0.6
260 x 98 x 50
ASMDT0A01
548
Downtilt Kit-B(Wind load Category “Medium”)
0.8/1.4/2.0
1.3
315 x 160 x 105
ASMDT0B01
549
Downtilt Kit-C(Wind load Category “Medium”)
1.4/2.0/2.6
2.1
330 x 160 x 135
ASMDT0C01
550
Downtilt Kit-D(Wind load Category “Heavy”)
1.4/2.0/2.6
2.1
330 x 170 x 135
ASMDT0D01
551
Downtilt Kit-H(Wind load Category “Heavy”)
1.4/2.0/2.6
3.1
360 x 170 x 120
ASMDT0H01
552
E - 1 - 2. Downtilt Kit
E - 1 - 3. Clamps Kit
Bracket Type
Mast diameter supported
(mm)
Weight(Kg)
Model
Page
Clamps Kit-A
38-115
2.0
ASMC00012
553
Clamps Kit-B
50-115
3.0
ASMC00013
554
Clamps Kit-C
50-115
3.0
ASMC00014
555
Clamps Kit-D
50-115
3.6
ASMC00015
556
Clamps Kit-H
50-115mm
6.3
ASMC00025
557
544
Product
Category
E. Bracket & Installation Guide
E-1. Bracket
E - 1 - 4. Special Installation Kit
Bracket Type
Mast diameter
supported (mm)
Weight(Kg)
Packing dimensions
(H x W x D) (mm)
Model
Page
Extension Clamps Kit-B for Panel Antennas
110 - 180
4.0
255 x 165 x 120
ASMC00006
558
Extension Clamps Kit-D for Panel Antennas
175-380
8.4
495 x 315 x 140
ASMC00009
559
Bracket Type
Antenna Width
Required
Weight(Kg)
Azimuth adjustment
range (°)
Model
Page
Wall-mounting Kit-A
<400mm
4.3
±30
ASMWM0001
560
E-2. Installation Guide
Bracket Type
Page
Antenna Installation Guide (with Type A Brackets)
561
Antenna Installation Guide (with Type B and Type C Brackets)
565
Antenna Installation Guide (with Type D Brackets)
569
Antenna Installation Guide (with Type H Brackets)
573
545
Product
Category
ASMC00001 ASMC00002 ASMC00003
Tri-sector Clamps

Suitable for antennas whose widths
are less than 400 mm and bases are
installed at both ends of the antennas.
**D
D
Adjustment is available together with
*Wmax

standard bracket within antenna
package.

Base
Support the third party customized
camouflage cover.

*Wmax: Maximum width of antenna
**D: Distance between mast center
and back of antenna
Not support antennas with brackets
of model F or above.
Tri-sector clamp
Mounting support clamp
Specifications
Model
ASMC00001
ASMC00002
ASMC00003
Angle between antennas (°)
120
120
120
Mast diameter (mm)
88.9
114.3
139.7
*Wmax (mm)
280
380
400
Maximum weight of a single antenna
(kg)
35
35
35
**D (mm)
Number of pieces
Net weight (approx.) (kg)
Packing weight (kg)
Packing dimensions (H x W x D) (mm)
Max. operational wind speed (km/h)
100
113
128
2 x 3 sector clamp
2 x mounting support
clamp
6 x connecting plate
2 x 3 sector clamp
2 x mounting support
clamp
6 x connecting plate
2 x 3 sector clamp
2 x mounting support
clamp
6 x connecting plate
5.8
6.3
6.6
7.3
7.8
8.1
410 x 280 x 160
410 x 280 x 160
410 x 280 x 160
150
150
150
Hot-dip galvanized steel
Hot-dip galvanized steel
Hot-dip galvanized steel
Stainless steel
Stainless steel
Stainless steel
3 sector clamp
Mounting support clamp
Material
Connecting plate
Screws
Nuts
546
Product
List
Product
Category
ASMC00004 ASMC00005
Extension Tri-sector Clamps
 Suitable for antennas whose widths are less than 500 mm
 Not support mechanical downtilt
*D
**Wmax
*Wmax: Maximum width of antenna
**D: Distance between mast center and back of antenna
Tri-sector clamp
Mounting support clamp
Connecting kit
Specifications
Model
Angle between antennas (°)
Mast diameter (mm)
*Wmax (mm)
ASMC00004
ASMC00005
120
120
114.3
139.7
500
500
Maximum weight of a single antenna (kg)
55
55
**D (mm)
250
265
2 x Tri- sector clamp
2 x mounting support clamp
6 x connecting kit
2 x Tri- sector clamp
2 x mounting support clamp
6 x connecting kit
15.8
16.3
Number of pieces
Net weight (approx.) (kg)
Packing weight (kg)
Packing dimensions (H x W x D) (mm)
Max. operational wind speed (km/h)
16.6
17.1
580 x 375 x 265
580 x 375 x 265
200
200
Hot-dip galvanized steel
Hot-dip galvanized steel
Stainless steel
Stainless steel
3 sector clamp
Mounting support clamp
Connecting plate
Screws
Nuts
547
Product
List
Product
Category
Bracket &
Installation Guide
Material
ASMDT0A01
Standard Downtilt kit-A for Panel Antennas
(Wind load Category “Light”)
0 - 20
0 - 12
0- 8
0.6
Packing
weight (kg)
Packing dimensions
(H x W x D) (mm)
Material
0.7
260 x 98 x 50
Sheet Metal: Hot-dip galvanized steel
Screws / nuts / washers: Stainless steel
140
190
0.7
1.4
2.0
Downtilt angle Net weight
(kg)
(°)
221
Antenna bases
distance (m)
57
76
Unit: mm
NOTE
Downtilt kit must be combined with corresponding models of clam for antenna installation.
Installation must follow the antenna installation guide within antenna package.
548
Product
List
Product
Category
ASMDT0B01
Standard Downtilt kit-B for Panel Antennas
(Wind load Category “Medium”)
0 - 20
0 - 16
0 - 12
1.3
Packing
weight (kg)
Packing dimensions
(H x W x D) (mm)
Material
1.8
315 x 160 x 105
Sheet Metal: Hot-dip galvanized steel
Screws / nuts / washers: Stainless steel
178
222
0.8
1.4
2.0
Downtilt angle Net weight
(kg)
(°)
278
Antenna bases
distance (m)
93
139
Unit: mm
NOTE
Downtilt kit must be combined with corresponding models of clam for antenna installation.
Installation must follow the antenna installation guide within antenna package.
549
Product
List
Product
Category
ASMDT0C01
Standard Downtilt kit-C for Panel Antennas
(Wind load Category “Medium”)
2.1
Packing dimensions
(H x W x D) (mm)
Material
2.7
330 x 160 x 135
Sheet Metal: Hot-dip galvanized steel
Screws / nuts / washers: Stainless steel
294
0 - 16
0 - 12
0- 8
Packing
weight (kg)
223
1.4
2.0
2.6
Downtilt angle Net weight
(kg)
(°)
179
Antenna bases
distance (m)
100
142
Unit: mm
Unit: mm
NOTE
Downtilt kit must be combined with corresponding models of clam for antenna installation.
Installation must follow the antenna installation guide within antenna package.
550
Product
List
Product
Category
ASMDT0D01
Standard Downtilt kit-D for Panel Antennas
(Wind load Category “Heavy”)
0 - 16
0 - 12
0- 8
2.1
Packing
weight (kg)
Packing dimensions
(H x W x D) (mm)
Material
2.7
330 x 170 x 135
Sheet Metal: Hot-dip galvanized steel
Screws / nuts / washers: Stainless steel
162
224
1.4
2.0
2.6
Downtilt angle Net weight
(kg)
(°)
297
Antenna bases
distance (m)
94
136
Unit: mm
NOTE
Downtilt kit must be combined with corresponding models of clam for antenna installation.
Installation must follow the antenna installation guide within antenna package.
551
Product
List
Product
Category
ASMDT0H01
Standard Downtilt kit-H for Panel Antennas
(Wind load Category “Heavy”)
0 - 16
0 - 12
0- 8
3.1
Packing
weight (kg)
Packing dimensions
(H x W x D) (mm)
Material
3.7
360 x 170 x 120
Sheet Metal: Hot-dip galvanized steel
Screws / nuts / washers: Stainless steel
18
0
249
1.4
2.0
2.6
Downtilt angle Net weight
(kg)
(°)
327
Antenna bases
distance (m)
106
150
Unit: mm
NOTE
Downtilt kit must be combined with corresponding models of clam for antenna installation.
Installation must follow the antenna installation guide within antenna package.
552
Product
List
Product
Category
ASMC00012
Clamps Kit-A for Panel Antennas
Type
Number of pieces
Mast diameter supported
Weight
Material
Clamps Kit-A
2 clamps
38 - 115 mm
Approx 2.1 kg
All parts: Hot-dip galvanized steel
Bolts / nuts / washers: Stainless steel
Unit: mm
2 pieces
NOTE
1.
2.
Clamps kit must be combined with corresponding models of clamp for antenna installation.
Installation must follow the antenna installation guide within antenna package.
553
Product
List
Product
Category
ASMC00013
Clamps Kit-B for Panel Antennas
Type
Number of pieces
Mast diameter supported
Weight
Material
Clamps Kit-B
2 clamps
50 - 115 mm
Approx 3.3 kg
All parts: Hot-dip galvanized steel
Bolts / nuts / washers: Stainless steel
Unit: mm
2 pieces
NOTE
1.
2.
Clamps kit must be combined with corresponding models of clamp for antenna installation.
Installation must follow the antenna installation guide within antenna package.
554
Product
List
Product
Category
ASMC00014
Clamps Kit-C for Panel Antennas
Type
Number of pieces
Mast diameter supported
Weight
Material
Clamps Kit-C
2 clamps
50 - 115 mm
Approx 3.3 kg
All parts: Hot-dip galvanized steel
Bolts / nuts / washers: Stainless steel
Unit: mm
2 pieces
NOTE
1.
2.
Clamps kit must be combined with corresponding models of clamp for antenna installation.
Installation must follow the antenna installation guide within antenna package.
555
Product
List
Product
Category
ASMC00015
Clamps Kit-D for Panel Antennas
Type
Number of pieces
Mast diameter supported
Weight
Material
Clamps Kit-D
2 clamps
50 - 115 mm
Approx 4.2 kg
All parts: Hot-dip galvanized steel
Bolts / nuts / washers: Stainless steel
Unit: mm
2 pieces
NOTE
1.
2.
Clamps kit must be combined with corresponding models of clamp for antenna installation.
Installation must follow the antenna installation guide within antenna package.
556
Product
List
Product
Category
ASMC00025
Clamps Kit-H for Panel Antennas
Type
Number of pieces
Mast diameter supported
Weight
Material
Clamps Kit-F
2 clamps
50 - 115 mm
Approx 6.3 kg
All parts: Hot-dip galvanized steel
Bolts / nuts / washers: Stainless steel
68
The distance is 68mm for M8 bolt
installation.
The distance is 106mm for M10
bolt installation.
66
196
74
182.3
164.3
89.3
106
139
Unit: mm
194.9
2 pieces
NOTE
1.
2.
Clamps kit must be combined with corresponding models of clamp for antenna installation.
Installation must follow the antenna installation guide within antenna package.
557
Product
List
Product
Category
ASMC00006
Extension Clamps Kit-B for Panel Antennas
Mast diameter
supported (mm)
Net weight
(kg)
Packing weight
(kg)
Packing dimensions
(H x W x D) (mm)
Material
110 - 180
3.7
4.0
255 x 165 x 120
All parts: Hot-dip galvanized steel
Bolts / nuts / washers: Stainless steel
68
The expand interface
for Clamps Kit-F
20
4-Φ9
110.5
160
70
50
194
The expand interface
for Clamps Kit-A
2-Φ9
2-Φ6.5
The expand interface for
Clamps Kit-B , Clamps KitC and Clamps Kit-D
35
68
Unit: mm
22
8
2 pieces
NOTE
1.
2.
Clamps kit must be combined with corresponding models of clamp for antenna installation.
Installation must follow the antenna installation guide within antenna package.
558
Product
List
Product
Category
ASMC00009
Extension Clamps Kit-D for Panel Antennas
Mast diameter
supported (mm)
Net weight
(kg)
Packing weight
(kg)
Packing dimensions
(H x W x D) (mm)
Material
175 - 380
8.4
9.5
495 x 315 x 140
All parts: Hot-dip galvanized steel
Bolts / nuts / washers: Stainless steel
112
68
2-Φ11
The expand interface for
Clamps Kit-F
20
4-Φ9
150
280
155
50
The expand interface
for Clamps Kit-A
2-Φ6.5
The expand interface for
Clamps Kit-B , Clamps KitC and Clamps Kit-D
2-Φ9
35
Unit: mm
68
396
450
2 pieces
NOTE
1.
2.
Clamps kit must be combined with corresponding models of clamp for antenna installation.
Installation must follow the antenna installation guide within antenna package.
559
Product
List
Product
Category
ASMWM0001
Wall-mounting Kit-A Hardware


Suitable for all panels with an antenna housing width (Wmax) less than 400 mm.
Not support antennas with brackets of model F or above.
Wall Mounting Hardware
Azimuth adjustment range (°)
±30
Wmax (mm)
400
Maximum weight of antenna
(kg)
35
Number of pieces
2
Weight (kg)
4.3
Sheet Metal
Material
Screws
Nuts
Hot-dip galvanized steel
Stainless steel
Ø12
Angular: 0°
Angular: 30°
Unit: mm
NOTE
The expansion bolts for concrete wall mounting are provided, other wall mounting screws are not supplied, they
must be chosen by installer according to the mounting condition.
560
Product
List
Product
Category
Antenna with Type A Brackets Installation Guide
Installation Tools
Clamps
Downtilt kit (Optional)
Torque wrench
Inclinometer
13 mm combination
wrench (2 PCS)
M8
(4 PCS)
(2 PCS)
(2 PCS)
(1 PCS)
Installation without Downtilt Kit
a
Assemble the Clamps
2 PCS
b
2 PCS
Install the Clamps
The installation torque is 18 N·m (M8).
The same installation method applies to
both upper and lower brackets.
c
Install the antenna
Check and tighten all the nuts
using a torque wrench when
the installation is complete.
The installation torque is 18
N·m (M8).
The same installation method applies to both upper and
lower brackets.
Check and tighten all the nuts when the installation is
complete. The installation torque is 18 N·m (M8).
561
Product
List
Product
Category
Installation with Downtilt Kit
a
Assemble the bracket
Assemble the lower bracket
2 PCS
2 PCS
Disassemble clamps and downtilt kit .
The packaging box
contains two clamps.
Just need disassemble
one of them.
Assemble the upper bracket
To avoid installation interference, assemble
brackets in the directions shown in the
preceding figure.
Tighten the nuts
Protrusion
Protrusion
To avoid installation interference, assemble
brackets in the directions shown in the
preceding figure.
562
Tighten the nuts
Product
List
Product
Category
b
Install the bracket
The same installation method applies to
both upper and lower brackets.
Follow the directions shown in the following figure to install
brackets. Tighten the nuts. The installation torque is 18 N·m (M8).
Turn the downtilt kit to 0 degree, and tighten the three screws as shown in the figure. The installation torque is 18 N·m (M8).
c
Install the antenna
Tighten all the nuts
before lifting the antenna
onto the tower. Ensure
the bracket is fully folded.
The same installation method applies to both upper and
lower brackets. Install and tighten the nuts. The installation
torque is 18 N·m (M8).
d
Adjust the mechanical downtilt
Loosen all the nuts as shown in the figure to adjust the downtilt.
Lower bracket
Upper bracket
563
Product
List
Product
Category
Adjust the mechanical downtilt.
Method 1: Using a scale plate
L
The letter "L" on the scale plate indicates the
distance between antenna bases. Determine
the value that is closest to the actual distance.
If the distance is approximately 1.4 m, observe
the readings corresponding to "L=1.4 m".
Scale plate
Example of
a scale plate
The scale plates may
vary with different
types of downtilt kit.
The scale plate shown
in the right figure is
only for reference.
Method 1 is used to roughly adjust the mechanical tilt. The reading is only for reference.
Tighten the
upper bracket
Method 2: Using an inclinometer
Before the adjustment, adjust the inclinometer
to the desired downtilt.
After the adjustment, locate the bead in the
middle of the inclinometer.
Method 2 is used to precisely adjust the
mechanical tilt.
Tighten the
lower bracket
After the adjustment is complete, tighten all the nuts. Use a torque wrench to check the torque of all locking nuts. The
installation torque is 18 N·m (M8).
3
564
Product
List
Product
Category
Antenna with Type B&C Brackets Installation Guide
Installation Tools
Downtilt kit (Optional)
Clamps
(1 PCS)
13 mm combination
wrench (2 PCS)
(2 PCS)
(1 PCS)
16 mm combination
wrench (2 PCS)
Inclinometer
ASMDT0B01
or
M10
(4 PCS)
Torque wrench
M10
(2 PCS)
M8
(4 PCS)
ASMDT0C01
(1 PCS)
(1 PCS)
Installation without Downtilt Kit
a
Assemble the Clamps
Assemble two clamps.
Follow the directions shown in the
following figure to assemble the
clamps.
Ensure that the protrusion,
if any, is on the same
side as the bolt head.
b
Install the Clamps
M8
Base
Install bolts on the antenna base. The
same installation method applies to both
upper and lower bases.
Align the bolt with the mounting hole on the clamp and determine the
bolt model according to the position of the mounting hole. Replace the
bolt if the bolt model is incorrect. Then, install and tighten the flat
washer, spring washer and nut.
Follow the directions shown in the following
figure to install brackets. Tighten the nuts.
The installation torque is 18 N·m (M8).
565
Product
List
Product
Category
c
Install the antenna
Check and tighten all the nuts using a torque
wrench when the installation is complete. The
installation torque is 40 N·m (M10).
The same installation method applies to
both upper and lower brackets. Install and
tighten the nuts to the same torque. The
installation torque is 40 N·m (M10).
Installation with Downtilt Kit
a
Assemble the bracket
Assemble the lower bracket
Disassemble clamps and downtilt kit .
Assemble the upper bracket
Protrusion
To avoid installation interference, tighten the nuts.
Assemble brackets in the directions shown in the preceding figure.
Protrusion
To avoid installation interference, tighten the nuts.
Assemble brackets in the directions shown in the preceding figure.
566
Product
List
Product
Category
b
Install the bracket
The same installation method applies to both
upper and lower brackets.
Turn the downtilt kit to 0 degree, and tighten the seven screws as shown in the figure. The installation torque
is 40 N·m (M10).
c
Install the antenna
Tighten all the nuts before
lifting the antenna onto
the tower. Ensure the
bracket is fully folded.
The same installation method applies to both upper and
lower brackets. Install and tighten the nuts. The
installation torque is 40 N·m (M10).
d
Adjust the mechanical downtilt
Loosen all the nuts as shown in the figure to adjust the downtilt.
Lower bracket
Upper bracket
567
Product
List
Product
Category
Adjust the mechanical downtilt.
Method 1: Using a scale plate
L
The letter "L" on the scale plate indicates the
distance between antenna bases. Determine
the value that is closest to the actual distance.
If the distance is approximately 1.4 m, observe
the readings corresponding to "L=1.4 m".
Scale plate
Example of
a scale plate
The scale plates may
vary with different
types of downtilt kit.
The scale plate shown
in the right figure is
only for reference.
Method 1 is used to roughly adjust the mechanical tilt. The reading is only for reference.
Tighten the
upper bracket
Method 2: Using an inclinometer
Before the adjustment, adjust the inclinometer
to the desired downtilt.
After the adjustment, locate the bead in the
middle of the inclinometer.
Method 2 is used to precisely adjust the
mechanical tilt.
Tighten the
lower bracket
After the adjustment is complete, tighten all the nuts. Use a torque wrench to check the torque of all locking nuts. The
installation torque is 40 N·m (M10).
3
568
Product
List
Product
Category
Antenna with Type D Brackets Installation Guide
Installation Tools
Downtilt kit (Optional)
Clamps
(1 PCS)
13 mm combination
wrench (1 PCS)
(2 PCS)
16 mm combination
wrench (2 PCS)
(1 PCS)
Inclinometer
ASMDT0D01
(1 PCS)
M10x150
(4 PCS)
Torque wrench
M8
(4 PCS)
(1 PCS)
M10 x 110
(1 PCS)
Installation without Downtilt Kit
a
Assemble the Clamps
Assemble two clamps.
Follow the directions shown in the
following figure to assemble the
clamps.
Ensure that the protrusion,
if any, is on the same
side as the bolt head.
b
Install the Clamps
M8
Base
Install bolts on the antenna base. The
same installation method applies to both
upper and lower bases.
Align the bolt with the mounting hole on the clamp and determine the
bolt model according to the position of the mounting hole. Replace the
bolt if the bolt model is incorrect. Then, install and tighten the flat
washer, spring washer and nut.
Follow the directions shown in the following
figure to install brackets. Tighten the nuts.
The installation torque is 18 N·m (M8).
569
Product
List
Product
Category
c
Install the antenna
Check and tighten all the nuts using a torque
wrench when the installation is complete. The
installation torque is 40 N·m (M10).
The same installation method applies to
both upper and lower brackets. Install and
tighten the nuts to the same torque. The
installation torque is 40 N·m (M10).
Installation with Downtilt Kit
a
Assemble the bracket
Assemble the lower bracket
Disassemble clamps and downtilt kit .
Assemble the upper bracket
Protrusion
To avoid installation interference,
assemble brackets in the directions shown
in the preceding figure.
Tighten the nuts
Protrusion
To avoid installation interference, assemble
brackets in the directions shown in the
preceding figure.
570
Tighten the nuts
Product
List
Product
Category
b
Install the bracket
The same installation method applies to both
upper and lower brackets.
Turn the downtilt kit to 0 degree, and tighten the seven screws as shown in the figure. The installation torque
is 40 N·m (M10).
c
Install the antenna
Tighten all the nuts before
lifting the antenna onto
the tower. Ensure the
bracket is fully folded.
The same installation method applies to both upper and
lower brackets. Install and tighten the nuts. The
installation torque is 40 N·m (M10).
d
Adjust the mechanical downtilt
Loosen all the nuts as shown in the figure to adjust the downtilt.
Lower bracket
Upper bracket
571
Product
List
Product
Category
Adjust the mechanical downtilt.
Method 1: Using a scale plate
L
The letter "L" on the scale plate indicates the
distance between antenna bases. Determine
the value that is closest to the actual distance.
If the distance is approximately 1.4 m, observe
the readings corresponding to "L=1.4 m".
Scale plate
Example of
a scale plate
The scale plates may
vary with different
types of downtilt kit.
The scale plate shown
in the right figure is
only for reference.
Method 1 is used to roughly adjust the mechanical tilt. The reading is only for reference.
Tighten the
upper bracket
Method 2: Using an inclinometer
Before the adjustment, adjust the inclinometer
to the desired downtilt.
After the adjustment, locate the bead in the
middle of the inclinometer.
Method 2 is used to precisely adjust the
mechanical tilt.
Tighten the
lower bracket
After the adjustment is complete, tighten all the nuts. Use a torque wrench to check the torque of all locking nuts. The
installation torque is 40 N·m (M10).
3
572
Product
List
Product
Category
Antenna with Type H Brackets Installation Guide
Installation Tools
Downtilt kit (Optional)
Clamps
(1 PCS)
13 mm combination
wrench (1 PCS)
(2 PCS)
16 mm combination
wrench (1 PCS)
ASMDT0H01
(1 PCS)
(1 PCS)
Inclinometer
18 mm combination wrench (2 PCS)
M12
M8
M10
(4 PCS) (4 PCS) (4 PCS)
Torque wrench
(1 PCS)
M12
(1 PCS)
Installation without Downtilt Kit
a
Assemble the Clamps
Assemble two clamps.
Follow the directions shown in the following figure to
assemble the clamps.
b
Install the Clamps
M8
Base
Install bolts on the antenna base. The
same installation method applies to both
upper and lower bases.
Align the bolt with the mounting hole on the clamp and determine the
bolt model according to the position of the mounting hole. Replace the
bolt if the bolt model is incorrect. Then, install and tighten the flat
washer, spring washer and nut.
Follow the directions shown in the following
figure to install brackets. Tighten the nuts.
The installation torque is 18 N·m (M8).
573
Product
List
Product
Category
c
Install the antenna
Check and tighten all the nuts using a torque
wrench when the installation is complete. The
installation torque is 50 N·m (M12).
The same installation method applies to
both upper and lower brackets. Install and
tighten the nuts to the same torque. The
installation torque is 50 N·m (M12).
Installation with Downtilt Kit
a
Assemble the bracket
Assemble the lower bracket
Disassemble clamps and downtilt kit .
Assemble the upper bracket
Protrusion
To avoid installation interference,
assemble brackets in the directions shown
in the preceding figure.
Tighten the nuts
Protrusion
To avoid installation interference, assemble
brackets in the directions shown in the
preceding figure.
574
Tighten the nuts
Product
List
Product
Category
b
Install the bracket
The same installation method applies to both
upper and lower brackets.
Turn the downtilt kit to 0 degree, and tighten the seven screws as shown in the figure. The installation torque
is 50 N·m (M12).
c
Install the antenna
Tighten all the nuts before
lifting the antenna onto
the tower. Ensure the
bracket is fully folded.
The same installation method applies to both upper and
lower brackets. Install and tighten the nuts. The
installation torque is 50 N·m (M12).
d
Adjust the mechanical downtilt
Loosen all the nuts as shown in the figure to adjust the downtilt.
Lower bracket
Upper bracket
575
Product
List
Product
Category
Adjust the mechanical downtilt.
Method 1: Using a scale plate
L
The letter "L" on the scale plate indicates the
distance between antenna bases. Determine
the value that is closest to the actual distance.
If the distance is approximately 1.4 m, observe
the readings corresponding to "L=1.4 m".
Scale plate
Example of
a scale plate
The scale plates may
vary with different
types of downtilt kit.
The scale plate shown
in the right figure is
only for reference.
Method 1 is used to roughly adjust the mechanical tilt. The reading is only for reference.
Tighten the
upper bracket
Method 2: Using an inclinometer
Before the adjustment, adjust the inclinometer
to the desired downtilt.
After the adjustment, locate the bead in the
middle of the inclinometer.
Method 2 is used to precisely adjust the
mechanical tilt.
Tighten the
lower bracket
After the adjustment is complete, tighten all the nuts. Use a torque wrench to check the torque of all locking nuts. The
installation torque is 50 N·m (M12).
3
576
Product
List
Product
Category
Huawei Antenna Test Standard
Test Item
Reference
Standard
Operation
Method
Condition
Duration
Low temperature ETSI 300 019-2-4
IEC 60068-2-1
-55℃
16h
High
temperature
ETSI 300 019-2-4
IEC 60068-2-2
+70℃
16h
Temperature
cycle
ETSI 300 019-2-4
IEC 60068-2-14 -55ºC/+70ºC
Humidity
ETSI 300 019-2-4
IEC 60068-2-30 +25ºC/+55ºC @ 95% RH 10 cycles, 240h
Wind load
ETSI 300 019-2-4
IEC 721-3-4
Simulated constant
3 surfaces, 144h
force of 200 km/h wind
3 axes×5 sweep
sinusoidal
2
6.15mm,10m/s , 2-9HZ cycles
9HZ-200HZ
5 cycles,50h
Vibration
ETSI 300 019-2-4
IEC 60068-2-6
Transportation
ETSI 300 019-2-4
IEC 60068-2-64 Truck level 3
Shock (without
packing)
ETSI 300 019-2-4
IEC 60068-2-27
200 m/s2, 6ms pulse
width
72s
Shock
(with packing)
ETSI 300 019-2-2
IEC 60068-2-27
300 m/s2,6ms pulse
width
72s
Drop
(with packing)
ETSI 300 019-2-2
ISO 12048
3 surfaces*2/ 2 Angles/
12 drops
4 Edges
Rain
ETSI 300 019-2-4
IEC 60068-2-18 0.067m3/min, 5r/min
2h
Wind driven rain GR-487-CORE
MIL-STD-810
Method 506.3
4 surfaces, more
than 120min
Salt mist
(continuous)
ETSI 300 019-2-4
IEC 60068-2-11 5% NaCl mist @+40ºC
Solar exposure
ETSI 300 019-2-4
IEC 60068-2-5
1120W/s2 @+40ºC
24h/cycle,
56 days
Sand and dust
ETSI 300 019-2-4
IEC 60068-2-68
<150um, 10.8.9m/s,
@25ºC <30%
12h
150mm/h, 31m/s,
0.5mm-4.5mm, 45°
577
Verification
Item
3 axes, 90min
Appearance
inspection;
Standing wave,
insulation, and
intermodulation
before and after
the test;
1000h
Product
Category
Catalogue Issue 01/2021
Any previous datasheet issues become invalid.
We reserve the right to make alterations in accordance with the requirements of our customers.
Huawei antenna supports NGMN recommendations on Base Station Antenna Standards (BASTA).
The notes of Huawei antenna followed:
•
Facilities, such as towers and poles, must bear the weight and wind load of antennas.
•
Huawei's standard brackets and accessories must be used for any installation.
•
The antenna working environment must meet the requirements specified in the datasheet.
•
Only qualified personnel are allowed to perform installation. Installation tools and procedures must
conform to requirements described in the antenna installation guide.
Product
Category