Project1
Totally Integrated
Automation Portal
Table of contents
7UT86
3-1
Device information
4-1
Hardware and protocols
5-1
Measuring-points routing
6-1
Function-group connections
7-1
Information routing
8-1
Communication mapping
9-1
Settings
10 - 1
Group warning
11 - 1
Process mode inactive
12 - 1
DIS_Z4_trip_all_CB
13 - 1
Display pages
Fault-display configuration
Safety and security
14 - 1
15 - 1
Totally Integrated
Automation Portal
7UT86
7UT86
Author: akbarask
Creation time: 09/06/2022 08:31:25
Last modified time: 09/07/2022 06:32:50
Modified by: Unnamed User
Totally Integrated
Automation Portal
7UT86
Device information
Device details
Name
Name
IEC 61850 name
IEC 61850 Edition
Type
Serial number
Configuration version
Communication configuration version
Product code
Short product code
CPU type
Value
7UT86
SIP
IEC 61850 Edition 2.1
7UT86
BM2201016412
V08.80.07
V08.80.07
7UT86-DAAA-AA0-0AAAA0-AQ0111-12113B-AAD000-000AC0CC2BA1-CH1
P1F607812
CP300
Condensed information about configured protection functions.
Transformer side 1
Name
50/51 OC-3ph-A1
Value
Settings group 1: off
Transformer side 2
Name
50/51 OC-3ph-A1
Value
Settings group 1: off
Transformer diff. 1
Name
87T diff. prot. 1
Value
Settings group 1: on
Transform. neut.p 1
Name
No protection functions were found.
Value
Line 1
Name
87 Line diff. prot.
Value
Settings group 1: on
Function points
Name
Function-points consumption
Value
20 out of 275
Function-chart (CFC) statistics
Name
Ticks for task High priority Event-Triggered
Ticks for task Event-Triggered
Ticks for task Low priority Event-Triggered and Low priority
Cyclic-Triggered
Value
0 out of 1000
317 out of 12857
0 out of 122584
Totally Integrated
Automation Portal
7UT86
Hardware and protocols
Binary input
Binary input
1.1
1.2
1.3
1.4
2.1
2.2
2.3
3.1
3.2
3.3
3.4
Terminals
1D11-1D9
1D12-1D10
1D11-1D13
1D12-1D14
2B11-2B12
2B11-2B14
2B11-2B13
3D7-3D9
3D8-3D10
3D11-3D13
3D12-3D14
Module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
Expansion module 3
Expansion module 3
Expansion module 3
Expansion module 3
User label
BI 1.1
BI 1.2
BI 1.3
BI 1.4
BI 2.1
BI 2.2
BI 2.3
BI 3.1
BI 3.2
BI 3.3
BI 3.4
Threshold value
Low: 44 V, High: 88 V
Low: 44 V, High: 88 V
Low: 44 V, High: 88 V
Low: 44 V, High: 88 V
Low: 44 V, High: 88 V
Low: 44 V, High: 88 V
Low: 44 V, High: 88 V
Low: 44 V, High: 88 V
Low: 44 V, High: 88 V
Low: 44 V, High: 88 V
Low: 44 V, High: 88 V
Binary output
Binary output
1.1
1.2
1.3
1.4
2.1
2.2
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
Terminals
1D1-1D2
1D3-1D4
1D5-1D6
1D7-1D8
2B3-2B4
2B5-2B6-2B8
3B10-3B9
3B12-3B11
3B13-3B14
3C1-3C2
3C4-3C3
3C6-3C5
3C7-3C8
3C9-3C10
3C11-3C12
3C13-3C14-3D1
3D4-3D2-3D3
Module
Base module
Base module
Base module
Base module
Base module
Base module
Expansion module 3
Expansion module 3
Expansion module 3
Expansion module 3
Expansion module 3
Expansion module 3
Expansion module 3
Expansion module 3
Expansion module 3
Expansion module 3
Expansion module 3
User label
BO-F make 1.1
BO-F make 1.2
BO-F make 1.3
BO-F make 1.4
BO make 2.1
BO change-over 2.2
BO-F make 3.1
BO-F make 3.2
BO-F make 3.3
BO-F make 3.4
BO-F make 3.5
BO-F make 3.6
BO make 3.7
BO make 3.8
BO make 3.9
BO-F change-over 3.10
BO-F change-over 3.11
Current transformers
Current transformer
1A1
1A2
1A3
1A4
1B1
1B2
1B3
1B4
3A1
3A2
3A3
3A4
Terminals
1A1-1A2
1A3-1A4
1A5-1A6
1A7-1A8
1B1-1B2
1B3-1B4
1B5-1B6
1B7-1B8
3A1-3A2
3A3-3A4
3A5-3A6
3A7-3A8
Module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
Expansion module 3
Expansion module 3
Expansion module 3
Expansion module 3
User label
I P 1A1
I P 1A2
I P 1A3
I P 1A4
I P 1B1
I P 1B2
I P 1B3
I M 1B4
I P 3A1
I P 3A2
I P 3A3
I P 3A4
Totally Integrated
Automation Portal
Voltage transformers
Voltage transformer
3.1
3.2
3.3
3.4
Terminals
3B1-3B2
3B3-3B4
3B5-3B6
3B7-3B8
Module
Expansion module 3
Expansion module 3
Expansion module 3
Expansion module 3
User label
V 3.1
V 3.2
V 3.3
V 3.4
Function keys
Function key
1
2
3
4
5
6
7
8
Module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
User label
Operational log
Fund./sym.comp.
Fault log
Fund./sym.comp.
LEDs
LED
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
1.13
1.14
1.15
1.16
Module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
Base module
User label
Operate general, Operat...
Operate general
Operate general
Module
Onboard Ethernet
USART-AD-1FO
ETH-BA-2EL
Protocol info
Ethernet-interface settings: DCP
Channel 1: Prot.interface
Channel 1: DCP,Line Mode
Functions in Test mode
Ethernet configurations
Interfaces
Slot
J
F
E
IP Interface 1 (J\Onboard Ethernet\Channel 1): IP Interface 1
Number
Settings
101.1031.5281.101
IP address
101.1031.5281.102
Subnet mask
101.1031.5281.103
Default Gateway IP Addr
101.1031.5281.104
Configuration mode
101.1031.5281.105
DCP enabled
Value
172.16.60.60
255.255.255.0
0.0.0.0
static
on
Totally Integrated
Automation Portal
Number
101.1031.5281.116
Settings
ShowVLAN
Value
false
Prot.interface (F\USART-AD-1FO\Channel 1): Prot.interface
Number
Settings
102.1031.6231.105
Connection via
Value
fiber optic
Prot. interf.1 (F\USART-AD-1FO\Channel 1)
Number
Settings
31.5161.1
Mode
31.5161.105
Max. error rate per hour
31.5161.106
Max. error rate per min
31.5161.107
Disturbance alarm after
31.5161.108
Transm. fail. alarm after
31.5161.109
Delay time threshold
31.5161.110
Difference Tx and Rx time
31.5161.113
Synchronization
Value
on
1%
1%
0.1 s
6s
30 ms
0.1 ms
External synchron. off
Protocol settings
Device combin. (F\USART-AD-1FO\Channel 1)
Number
Settings
31.5131.102
Address of device 1
31.5131.103
Address of device 2
31.5131.101
Local device is device
31.5131.122
Lowest appearing bit rate
31.5131.126
Connection mode
Value
101
102
1
64 kBit/s
SIPROTEC 5
IP Interface 1 (E\ETH-BA-2EL\Channel 1): IP Interface 1
Number
Settings
103.1031.5281.101
IP address
103.1031.5281.102
Subnet mask
103.1031.5281.103
Default Gateway IP Addr
103.1031.5281.104
Configuration mode
103.1031.5281.105
DCP enabled
103.1031.5281.116
ShowVLAN
Value
10.16.60.60
255.255.255.0
0.0.0.0
static
on
false
Totally Integrated
Automation Portal
7UT86
Measuring-points routing
Current-measuring points
Measuring point
Meas.point I-3ph 1
Connection type
3-phase
Meas.point I-3ph 2
3-phase
Meas.point I-1ph 1
Terminals
I A: 1A1-1A2
I B: 1A3-1A4
I C: 1A5-1A6
I A: 3A1-3A2
I B: 3A3-3A4
I C: 3A5-3A6
Ix: 1A7-1A8
Voltage-measuring points
Measuring point
Meas.point V-3ph 1
Connection type
3 ph-to-gnd volt. + VN
Terminals
V A: 3B1-3B2
V B: 3B3-3B4
V C: 3B5-3B6
VN: 3B7-3B8
Totally Integrated
Automation Portal
7UT86
Function-group connections
Measuring point to function-group connections
Measuring point
Meas.point I-3ph 1[ID 1]
Meas.point I-3ph 1[ID 1]
Meas.point I-3ph 1[ID 1]
Meas.point V-3ph 1[ID 5]
Meas.point V-3ph 1[ID 5]
Meas.point I-3ph 2[ID 2]
Meas.point I-1ph 1[ID 3]
Measuring point
Transformer side 1:I 3ph
Line 1:I line 3ph
Circuit breaker 1:I 3ph
Transformer side 1:V 3ph
Line 1:V 3ph
Transformer side 2:I 3ph
Transform. neut.p 1:I 1ph
Function group to circuit-breaker group connections
Protection group
Transformer side 1
Transformer side 2
Transformer diff. 1
Transform. neut.p 1
Line 1
Circuit-breaker group(s)
Circuit breaker 1
Circuit breaker 1
Circuit breaker 1
Circuit breaker 1
Circuit breaker 1
Protection-function group to protection-function group connections
Protection group
Transformer side 1
Transformer side 1
Transformer side 2
Transformer diff. 1
Transformer diff. 1
Transform. neut.p 1
Line 1
2 device prot. com.
Transformer group(s)
Transform. neut.p 1:neutral point
Transformer diff. 1:side
Transformer diff. 1:side
Transformer side 1:side
Transformer side 2:side
Transformer side 1:neutral point
2 device prot. com.:protection data
Line 1:protection data
Totally Integrated
Automation Portal
7UT86
Information routing
Legend
Abbreviation
BI
FK
BO
D
L
R
FSR
SSR
CR
TR
X
T
XT
General
Number
Description
Binary input
Function keys
Binary output
Display
Logs
Recorder
Fast-scan recorder
Slow-scan recorder
Continuous recorder
Trend recorder
Routing
Trigger
Routing and trigger
Group
91.500
91.501
91.502
91.503
91.504
General
General
General
General
General
91.505
General
91.506
General
91.510
91.511
91.507
General
General
General
91.508
General
91.509
General
91.315
91.53
91.54
91.309
General
General
General
General
General
General
91.310
91.311
91.312
91.317
General
General
General
General
Signal
>SG choice bit 1
>SG choice bit 2
>SG choice bit 3
>Sw. authority local
>Sw. authority re‐
mote
>Sw. mode inter‐
locked
>Sw. mode non-in‐
terl.
>Test mode on
>Test mode off
>Dev. funct.logout
on
>Dev. funct.logout
off
>Block monitoring
dir.
Device logged off
Health
Health\warning
Health\alarm
Protection inactive
Sw.authority
key/set
Sw.mode key/set
Switching authority
Switching mode
Block monitoring
dir.
Type
Source
BI
FK
Destination
CFC BO LED R
SPS
SPS
SPS
SPS
SPS
L
O
O
O
O
O
SPS
O
SPS
O
SPS
SPS
SPS
O
O
O
SPS
O
SPS
O
SPS
ENS
SPS
SPS
SPS
ENS
O
O
O
O
ENS
ENS
ENS
SPS
O
O
O
O
CFC D
X
X
Totally Integrated
Automation Portal
Number
Group
Signal
Type
91.318
General
INS
91.329
General
91.51
91.56
91.321
91.319
91.308
General
General
General
General
General
91.300
General
91.301
General
91.302
General
91.303
General
91.304
General
91.305
General
91.306
General
91.307
General
Active settings
group
Functions in Test
mode
Test mode
Application mode
Protection on
Device logout
Switching auth. sta‐
tion
Act. settings group
1
Act. settings group
2
Act. settings group
3
Act. settings group
4
Act. settings group
5
Act. settings group
6
Act. settings group
7
Act. settings group
8
Signal
Type
>GOOSE Stop
>SV Stop
Process mode inac‐
tive
Physical health
Device startup
Life contact
Battery failure
Clock fail
Error meas. trans.
Compensation error
Offset error
DIGSI active
Simulation mode
active
Commiss. mode ac‐
tive
Error memory
Auxiliary Power Fail
SEU happened
Cyber Security state
Cyber-security
event
Event lost
Chatter blocking
SPS
SPS
SPS
Device
Number
Group
4171.501 Device
4171.502 Device
Device
4171.301
4171.303
4171.304
4171.305
4171.306
4171.310
4171.312
4171.314
4171.316
4171.317
Device
Device
Device
Device
Device
Device
Device
Device
Device
Device
4171.318 Device
4171.319
4171.320
4171.343
4171.321
4171.322
Device
Device
Device
Device
Device
4171.323 Device
4171.324 Device
Source
BI
FK
Destination
CFC BO LED R
SPS
U1.1
6
L
O
O
ENC
ENC
SPC
SPC
SPC
O
O
O
O
O
SPC
O
SPC
O
SPC
O
SPC
O
SPC
O
SPC
O
SPC
O
SPC
O
Source
BI
FK
Destination
CFC BO LED R
CFC D
L
O
O
CFC D
X
ENS
SPS
SPS
SPS
SPS
ENS
ENS
ENS
SPS
SPS
O
O
O
O
O
O
O
O
O
O
X
X
SPS
O
X
SPS
SPS
SPS
ENS
ENS
O
O
O
O
O
SPS
SPS
O
O
Totally Integrated
Automation Portal
Number
Group
Signal
Type
Flash disk health
GOOSE/SV
sim.mode
ENS
SPC
Signal
Type
Alarm handling
Alarm handling
Alarm handling
Alarm handling
Alarm handling
Alarm handling
Alarm handling
Alarm handling
>Group Alarm
>Group Warning
>Group indication
Group alarm
Group warning
Group indication
Behavior
Health
SPS
SPS
SPS
SPS
SPS
SPS
ENS
ENS
Group
Signal
Type
Time sync. error
SPS
Signal
Type
4171.325 Device
4171.342 Device
Alarm handling
Number
Group
5971.503
5971.504
5971.505
5971.300
5971.301
5971.302
5971.52
5971.53
Time sync.
Number
8851.305 Time sync.
Power system
Number
Group
11.2311.5 General
00
11.2311.5 General
01
11.2311.3 General
21
11.931.88 Meas.point I-3ph 1\CT 3phase
81.319
11.931.88 Meas.point I-3ph 1\CT 3phase
81.320
11.931.88 Meas.point I-3ph 1\CT 3phase
81.321
11.931.88 Meas.point I-3ph 1\CT 3phase
81.322
11.931.88 Meas.point I-3ph 1\CT 3phase
81.324
11.931.88 Meas.point I-3ph 1\CT 3phase
81.325
11.931.38 Meas.point I-3ph 1\CT 1
41.300
11.931.38 Meas.point I-3ph 1\CT 2
42.300
11.931.38 Meas.point I-3ph 1\CT 3
43.300
11.931.24 Meas.point I-3ph 1\Supv.
balan. I
91.82
Source
BI
FK
Destination
CFC BO LED R
Source
BI
FK
Destination
CFC BO LED R
X
X
Source
BI
FK
Destination
CFC BO LED R
Source
BI
FK
Destination
CFC BO LED R
>Phs-rotation rever‐ SPS
sal
>Invert Phases
SPS
L
O
O
CFC D
L
O
O
O
O
O
O
O
O
CFC D
L
O
CFC D
L
O
CFC D
O
Freq.out of op‐
SPS
er.range
Phases AB inverted SPS
O
Phases BC inverted SPS
O
Phases AC inverted SPS
O
Disconnection via BI SPS
O
Disconnect. via con‐ SPS
trol
Meas.point
SPS
mult.config.
Sampled val. cur‐
SAV
rent
Sampled val. cur‐
SAV
rent
Sampled val. cur‐
SAV
rent
>Block function
SPS
O
O
O
X
X
X
O
Totally Integrated
Automation Portal
Number
Group
11.931.24 Meas.point I-3ph 1\Supv.
balan. I
91.52
11.931.24 Meas.point I-3ph 1\Supv.
balan. I
91.54
11.931.24 Meas.point I-3ph 1\Supv.
balan. I
91.53
11.931.24 Meas.point I-3ph 1\Supv.
balan. I
91.71
11.931.25 Meas.point I-3ph 1\Supv.
ph.seq.I
51.82
11.931.25 Meas.point I-3ph 1\Supv.
ph.seq.I
51.52
11.931.25 Meas.point I-3ph 1\Supv.
ph.seq.I
51.54
11.931.25 Meas.point I-3ph 1\Supv.
ph.seq.I
51.53
11.931.25 Meas.point I-3ph 1\Supv.
ph.seq.I
51.71
11.931.17 Meas.point I-3ph 1\Saturat.
det.
731.52
11.931.17 Meas.point I-3ph 1\Saturat.
det.
731.53
11.931.17 Meas.point I-3ph 1\Saturat.
det.
731.54
11.941.89 Meas.point V-3ph 1\VT 3phase
11.315
11.941.89 Meas.point V-3ph 1\VT 3phase
11.317
11.941.89 Meas.point V-3ph 1\VT 3phase
11.316
11.941.38 Meas.point V-3ph 1\VT 1
11.300
11.941.38 Meas.point V-3ph 1\VT 2
12.300
11.941.38 Meas.point V-3ph 1\VT 3
13.300
11.941.38 Meas.point V-3ph 1\VT 4
14.300
11.941.25 Meas.point V-3ph 1\Supv.
balan. V
21.82
11.941.25 Meas.point V-3ph 1\Supv.
balan. V
21.52
11.941.25 Meas.point V-3ph 1\Supv.
balan. V
21.54
11.941.25 Meas.point V-3ph 1\Supv.
balan. V
21.53
11.941.25 Meas.point V-3ph 1\Supv.
balan. V
21.71
11.941.25 Meas.point V-3ph 1\Supv.
ph.seq.V
81.82
11.941.25 Meas.point V-3ph 1\Supv.
ph.seq.V
81.52
11.941.25 Meas.point V-3ph 1\Supv.
ph.seq.V
81.54
11.941.25 Meas.point V-3ph 1\Supv.
ph.seq.V
81.53
Signal
Type
Source
BI
FK
Destination
CFC BO LED R
Behavior
ENS
L
O
Inactive
SPS
O
Health
ENS
O
Failure
SPS
O
>Block function
SPS
O
Behavior
ENS
O
Inactive
SPS
O
Health
ENS
O
Failure
SPS
O
Behavior
ENS
O
Health
ENS
O
Inactive
SPS
O
Phases AB inverted SPS
O
Phases AC inverted SPS
O
Phases BC inverted SPS
O
Sampled val. volt‐
age
Sampled val. volt‐
age
Sampled val. volt‐
age
Sampled val. volt‐
age
>Block function
SAV
X
SAV
X
SAV
X
SAV
X
SPS
O
Behavior
ENS
O
Inactive
SPS
O
Health
ENS
O
Failure
SPS
O
>Block function
SPS
O
Behavior
ENS
O
Inactive
SPS
O
Health
ENS
O
CFC D
X
X
X
Totally Integrated
Automation Portal
Number
Group
11.941.25 Meas.point V-3ph 1\Supv.
ph.seq.V
81.71
11.941.24 Meas.point V-3ph 1\Supv.
sum V
61.82
11.941.24 Meas.point V-3ph 1\Supv.
sum V
61.52
11.941.24 Meas.point V-3ph 1\Supv.
sum V
61.54
11.941.24 Meas.point V-3ph 1\Supv.
sum V
61.53
11.941.24 Meas.point V-3ph 1\Supv.
sum V
61.71
11.941.26 Meas.point V-3ph 1\VT mini‐
atureCB
41.500
11.932.88 Meas.point I-3ph 2\CT 3phase
81.319
11.932.88 Meas.point I-3ph 2\CT 3phase
81.320
11.932.88 Meas.point I-3ph 2\CT 3phase
81.321
11.932.88 Meas.point I-3ph 2\CT 3phase
81.322
11.932.88 Meas.point I-3ph 2\CT 3phase
81.324
11.932.88 Meas.point I-3ph 2\CT 3phase
81.325
11.932.38 Meas.point I-3ph 2\CT 1
41.300
11.932.38 Meas.point I-3ph 2\CT 2
42.300
11.932.38 Meas.point I-3ph 2\CT 3
43.300
11.932.24 Meas.point I-3ph 2\Supv.
balan. I
91.82
11.932.24 Meas.point I-3ph 2\Supv.
balan. I
91.52
11.932.24 Meas.point I-3ph 2\Supv.
balan. I
91.54
11.932.24 Meas.point I-3ph 2\Supv.
balan. I
91.53
11.932.24 Meas.point I-3ph 2\Supv.
balan. I
91.71
11.932.25 Meas.point I-3ph 2\Supv.
ph.seq.I
51.82
11.932.25 Meas.point I-3ph 2\Supv.
ph.seq.I
51.52
11.932.25 Meas.point I-3ph 2\Supv.
ph.seq.I
51.54
11.932.25 Meas.point I-3ph 2\Supv.
ph.seq.I
51.53
11.932.25 Meas.point I-3ph 2\Supv.
ph.seq.I
51.71
11.951.38 Meas.point I-1ph 1\CT 1
41.300
Signal
Type
Source
BI
FK
Destination
CFC BO LED R
Failure
SPS
L
O
>Block function
SPS
O
Behavior
ENS
O
Inactive
SPS
O
Health
ENS
O
Failure
SPS
O
X
>Open
SPS
O
X
Phases AB inverted SPS
O
Phases BC inverted SPS
O
Phases AC inverted SPS
O
Disconnection via BI SPS
O
Disconnect. via con‐ SPS
trol
Meas.point
SPS
mult.config.
Sampled val. cur‐
SAV
rent
Sampled val. cur‐
SAV
rent
Sampled val. cur‐
SAV
rent
>Block function
SPS
O
CFC D
X
O
X
X
X
O
Behavior
ENS
O
Inactive
SPS
O
Health
ENS
O
Failure
SPS
O
>Block function
SPS
O
Behavior
ENS
O
Inactive
SPS
O
Health
ENS
O
Failure
SPS
O
Sampled val. cur‐
rent
SAV
X
X
X
Totally Integrated
Automation Portal
Recording
Number
Group
81.7441.5 Grnd.-flt log
2
81.7441.5 Grnd.-flt log
3
81.7441.3 Grnd.-flt log
10
81.7441.3 Grnd.-flt log
11
81.791.27 Fault recorder\Control
61.502
81.791.27 Fault recorder\Control
61.503
81.791.27 Fault recorder\Control
61.310
81.791.27 Fault recorder\Control
61.327
81.791.27 Fault recorder\Control
61.324
81.791.27 Fault recorder\Control
61.300
81.791.27 Fault recorder\Control
61.305
81.791.27 Fault recorder\Control
61.306
G:Time Synchron.
Number
Group
0.2311.53 General
0.20731.5 PPS
3
J:Onboard Ethernet
Number
Group
101.2311. General
53
Transformer side 1
Number
Group
911.4141. Inrush detect.
52
911.4141. Inrush detect.
53
911.4141. Inrush detect.
54
911.4141. Inrush detect.
55
911.4141. Inrush detect.
300
Signal
Type
Source
BI
FK
Destination
CFC BO LED R
Behavior
ENS
L
O
Health
ENS
O
Fault number
INS
O,G
Ground-fault log is INS
full
>External start
SPS
G
>Manual start
SPS
O
Fault number
INS
O,F
Tmax reduced
SPS
O
Fault log is full
INS
F
Start record
SPC
O
Reset memory
SPC
O
Clear memory
SPC
O
Signal
Type
O
Source
BI
FK
Destination
CFC BO LED R
Source
BI
FK
Destination
CFC BO LED R
Source
BI
FK
Destination
CFC BO LED R
L
O
O
CFC D
L
O
CFC D
CFC D
Health
Health
ENS
ENS
Signal
Type
Health
ENS
Signal
Type
Behavior
ENS
L
O
Health
ENS
O
Inactive
SPS
O
Pickup
ACD
F
2.harmonic phase A SPS
CFC D
F
Totally Integrated
Automation Portal
Number
Group
Signal
Type
Source
BI
FK
Destination
CFC BO LED R
911.4141. Inrush detect.
301
911.4141. Inrush detect.
302
911.4141. Inrush detect.
305
911.4141. Inrush detect.
306
911.1008 87N REF 1
1.82
911.1008 87N REF 1
1.52
911.1008 87N REF 1
1.53
911.1008 87N REF 1
1.54
911.1008 87N REF 1
1.55
911.1008 87N REF 1
1.57
87N REF 1
2.harmonic phase B SPS
L
F
2.harmonic phase C SPS
F
CWA
SPS
F
Cross-blocking
SPS
F
>Block function
SPS
O
Behavior
ENS
O
Health
ENS
O
Inactive
SPS
O
Pickup
ACD
F
Operate
ACT
F
Operate\general
SPS
911.1008 87N REF 1
1.305
911.1008 87N REF 1
1.311
911.1008 87N REF 1
1.312
911.1131. Process monitor\Closure de‐
4681.300 tec.
Fund./sym.comp.\Fundam
300.0
Fund./sym.comp.\Fundam
300.0
Fund./sym.comp.\Fundam
300.0
911.201.6 50/51 OC-3ph-A1\Definite-T
1
61.81
911.201.6 50/51 OC-3ph-A1\Definite-T
1
61.500
911.201.6 50/51 OC-3ph-A1\Definite-T
1
61.52
911.201.6 50/51 OC-3ph-A1\Definite-T
1
61.53
911.201.6 50/51 OC-3ph-A1\Definite-T
1
61.54
911.201.6 50/51 OC-3ph-A1\Definite-T
1
61.55
911.201.6 50/51 OC-3ph-A1\Definite-T
1
61.57
911.201.6 50/51 OC-3ph-A1\Definite-T
1
61.60
911.201.6 50/51 OC-3ph-A1\Definite-T
2
62.81
911.201.6 50/51 OC-3ph-A1\Definite-T
2
62.500
911.201.6 50/51 OC-3ph-A1\Definite-T
2
62.52
911.201.6 50/51 OC-3ph-A1\Definite-T
2
62.53
Block by direct. det. SPS
O
I REF,Trip operate
MV
F
I angle,REF operate MV
F
Closure
SPS
F
Iph:A
Iph:B
Iph:C
>Block stage
CMV
CMV
CMV
SPS
O
>Block delay & op.
SPS
F
Behavior
ENS
O
Health
ENS
O
Inactive
SPS
O
Pickup
ACD
F
Operate
ACT
F
Inrush blocks oper‐ ACT
ate
>Block stage
SPS
F
>Block delay & op.
SPS
F
Behavior
ENS
O
Health
ENS
O
CFC D
U1.3, L1.3
U3.1
X
X
X
O
Totally Integrated
Automation Portal
Number
Group
Signal
911.201.6 50/51 OC-3ph-A1\Definite-T Inactive
2
62.54
911.201.6 50/51 OC-3ph-A1\Definite-T Pickup
2
62.55
911.201.6 50/51 OC-3ph-A1\Definite-T Operate
2
62.57
911.201.6 50/51 OC-3ph-A1\Definite-T Inrush blocks oper‐
2
ate
62.60
50/51
OC-3ph-A1\Inverse-T
1
>Block
stage
911.201.6
91.81
911.201.6 50/51 OC-3ph-A1\Inverse-T 1 >Block delay & op.
91.500
911.201.6 50/51 OC-3ph-A1\Inverse-T 1 Behavior
91.52
911.201.6 50/51 OC-3ph-A1\Inverse-T 1 Health
91.53
911.201.6 50/51 OC-3ph-A1\Inverse-T 1 Inactive
91.54
911.201.6 50/51 OC-3ph-A1\Inverse-T 1 Pickup
91.55
911.201.6 50/51 OC-3ph-A1\Inverse-T 1 Operate
91.57
911.201.6 50/51 OC-3ph-A1\Inverse-T 1 Disk emulation run‐
ning
91.59
911.201.6 50/51 OC-3ph-A1\Inverse-T 1 Inrush blocks oper‐
ate
91.60
50/51 OC-3ph-A1\Group in‐ Pickup\general
dicat.
50/51 OC-3ph-A1\Group in‐ Operate\general
dicat.
Transformer side 2
Number
Group
912.4141. Inrush detect.
52
912.4141. Inrush detect.
53
912.4141. Inrush detect.
54
912.4141. Inrush detect.
55
912.4141. Inrush detect.
300
912.4141. Inrush detect.
301
912.4141. Inrush detect.
302
912.4141. Inrush detect.
305
912.4141. Inrush detect.
306
912.1131. Process monitor\Closure de‐
4681.300 tec.
Fund./sym.comp.\Fundam
300.0
Type
Source
BI
FK
Destination
CFC BO LED R
SPS
L
O
ACD
F
ACT
F
ACT
F
SPS
O
SPS
F
ENS
O
ENS
O
SPS
O
ACD
F
ACT
F
SPS
F
ACT
F
SPS
R(X)
SPS
R(X)
Signal
Type
Source
BI
FK
Destination
CFC BO LED R
Behavior
ENS
L
O
Health
ENS
O
Inactive
SPS
O
Pickup
ACD
F
2.harmonic phase A SPS
F
2.harmonic phase B SPS
F
2.harmonic phase C SPS
F
CWA
SPS
F
Cross-blocking
SPS
F
Closure
SPS
F
Iph:A
CMV
CFC D
CFC D
X
Totally Integrated
Automation Portal
Number
Group
Signal
Fund./sym.comp.\Fundam Iph:B
300.0
Fund./sym.comp.\Fundam Iph:C
300.0
912.201.6 50/51 OC-3ph-A1\Definite-T >Block stage
1
61.81
912.201.6 50/51 OC-3ph-A1\Definite-T >Block delay & op.
1
61.500
912.201.6 50/51 OC-3ph-A1\Definite-T Behavior
1
61.52
912.201.6 50/51 OC-3ph-A1\Definite-T Health
1
61.53
912.201.6 50/51 OC-3ph-A1\Definite-T Inactive
1
61.54
912.201.6 50/51 OC-3ph-A1\Definite-T Pickup
1
61.55
912.201.6 50/51 OC-3ph-A1\Definite-T Operate
1
61.57
912.201.6 50/51 OC-3ph-A1\Definite-T Inrush blocks oper‐
1
ate
61.60
912.201.6 50/51 OC-3ph-A1\Definite-T >Block stage
2
62.81
912.201.6 50/51 OC-3ph-A1\Definite-T >Block delay & op.
2
62.500
912.201.6 50/51 OC-3ph-A1\Definite-T Behavior
2
62.52
912.201.6 50/51 OC-3ph-A1\Definite-T Health
2
62.53
912.201.6 50/51 OC-3ph-A1\Definite-T Inactive
2
62.54
912.201.6 50/51 OC-3ph-A1\Definite-T Pickup
2
62.55
912.201.6 50/51 OC-3ph-A1\Definite-T Operate
2
62.57
912.201.6 50/51 OC-3ph-A1\Definite-T Inrush blocks oper‐
2
ate
62.60
912.201.6 50/51 OC-3ph-A1\Inverse-T 1 >Block stage
91.81
912.201.6 50/51 OC-3ph-A1\Inverse-T 1 >Block delay & op.
91.500
912.201.6 50/51 OC-3ph-A1\Inverse-T 1 Behavior
91.52
912.201.6 50/51 OC-3ph-A1\Inverse-T 1 Health
91.53
912.201.6 50/51 OC-3ph-A1\Inverse-T 1 Inactive
91.54
912.201.6 50/51 OC-3ph-A1\Inverse-T 1 Pickup
91.55
912.201.6 50/51 OC-3ph-A1\Inverse-T 1 Operate
91.57
912.201.6 50/51 OC-3ph-A1\Inverse-T 1 Disk emulation run‐
ning
91.59
912.201.6 50/51 OC-3ph-A1\Inverse-T 1 Inrush blocks oper‐
ate
91.60
50/51 OC-3ph-A1\Group in‐ Pickup\general
dicat.
50/51 OC-3ph-A1\Group in‐ Operate\general
dicat.
Type
Source
BI
FK
Destination
CFC BO LED R
L
CMV
CMV
SPS
O
SPS
F
ENS
O
ENS
O
SPS
O
ACD
F
ACT
F
ACT
F
SPS
O
SPS
F
ENS
O
ENS
O
SPS
O
ACD
F
ACT
F
ACT
F
SPS
O
SPS
F
ENS
O
ENS
O
SPS
O
ACD
F
ACT
F
SPS
F
ACT
F
SPS
R(X)
SPS
R(X)
CFC D
X
X
Totally Integrated
Automation Portal
Transformer diff. 1
Number
Group
Signal
Type
Source
BI
FK
87T diff. prot. 1\General
87T diff. prot. 1\General
87T diff. prot. 1\General
87T diff. prot. 1\General
87T diff. prot. 1\General
87T diff. prot. 1\General
901.1691. 87T diff. prot. 1\General
2311.311
901.1691. 87T diff. prot. 1\General
2311.312
901.1691. 87T diff. prot. 1\General
2311.313
901.1691. 87T diff. prot. 1\General
2311.314
901.1691. 87T diff. prot. 1\General
2311.315
901.1691. 87T diff. prot. 1\General
2311.316
901.1691. 87T diff. prot. 1\I-DIFF
11041.81
901.1691. 87T diff. prot. 1\I-DIFF
11041.52
901.1691. 87T diff. prot. 1\I-DIFF
11041.53
901.1691. 87T diff. prot. 1\I-DIFF
11041.54
901.1691. 87T diff. prot. 1\I-DIFF
11041.55
87T diff. prot. 1\I-DIFF
87T diff. prot. 1\I-DIFF
87T diff. prot. 1\I-DIFF
901.1691. 87T diff. prot. 1\I-DIFF
11041.57
87T diff. prot. 1\I-DIFF
I diff.\phs A
I diff.\phs B
I diff.\phs C
I restr.\phs A
I restr.\phs B
I restr.\phs C
I diff. operate phA
MV
MV
MV
MV
MV
MV
MV
Destination
CFC BO LED R
L
R(X)
R(X)
R(X)
R(X)
R(X)
R(X)
F
I diff. operate phB
MV
F
I diff. operate phC
MV
F
I restr. operate phA MV
F
I restr. operate phB MV
F
I restr. operate phC MV
F
>Block stage
SPS
O
Behavior
ENS
O
Health
ENS
O
Inactive
SPS
O
Pickup
ACD
F
Pickup\phs A
Pickup\phs B
Pickup\phs C
Operate
SPS
SPS
SPS
ACT
Operate\general
SPS
87T diff. prot. 1\I-DIFF
87T diff. prot. 1\I-DIFF
87T diff. prot. 1\I-DIFF
901.1691. 87T diff. prot. 1\I-DIFF
11041.30
1
901.1691. 87T diff. prot. 1\I-DIFF
11041.30
2
901.1691. 87T diff. prot. 1\I-DIFF
11041.30
3
901.1691. 87T diff. prot. 1\I-DIFF
11041.30
4
901.1691. 87T diff. prot. 1\I-DIFF
11041.30
5
Operate\phs A
Operate\phs B
Operate\phs C
Slope 1
SPS
SPS
SPS
MV
R(X)
R(X)
R(X)
F
U1.3, L1.2
U3.1
R(X)
R(X)
R(X)
F
Incr. of char. (Start) SPS
R(X) O,F
Increase of char.
(DC)
SPS
R(X) F
Blocked by inrush
SPS
F
Blocked by 2.Har‐
mon.
ACT
F
CFC D
Totally Integrated
Automation Portal
Number
Group
Signal
Type
87T diff. prot. 1\I-DIFF
Blocked by 2.Har‐
mon.\phs A
Blocked by 2.Har‐
mon.\phs B
Blocked by 2.Har‐
mon.\phs C
Crossblock by
2.Harm.
SPS
87T diff. prot. 1\I-DIFF
87T diff. prot. 1\I-DIFF
901.1691. 87T diff. prot. 1\I-DIFF
11041.30
6
901.1691. 87T diff. prot. 1\I-DIFF
11041.30
7
901.1691. 87T diff. prot. 1\I-DIFF
11041.30
8
901.1691. 87T diff. prot. 1\I-DIFF
11041.30
9
901.1691. 87T diff. prot. 1\I-DIFF
11041.31
0
87T diff. prot. 1\I-DIFF
87T diff. prot. 1\I-DIFF
87T diff. prot. 1\I-DIFF
901.1691. 87T diff. prot. 1\I-DIFF
11041.31
1
901.1691. 87T diff. prot. 1\I-DIFF
11041.31
2
87T diff. prot. 1\I-DIFF
87T diff. prot. 1\I-DIFF
87T diff. prot. 1\I-DIFF
901.1691. 87T diff. prot. 1\I-DIFF
11041.31
3
901.1691. 87T diff. prot. 1\I-DIFF
11041.31
6
901.1691. 87T diff. prot. 1\I-DIFF fast
11071.81
901.1691. 87T diff. prot. 1\I-DIFF fast
11071.52
901.1691. 87T diff. prot. 1\I-DIFF fast
11071.53
901.1691. 87T diff. prot. 1\I-DIFF fast
11071.54
901.1691. 87T diff. prot. 1\I-DIFF fast
11071.55
87T diff. prot. 1\I-DIFF fast
87T diff. prot. 1\I-DIFF fast
87T diff. prot. 1\I-DIFF fast
Source
BI
FK
Destination
CFC BO LED R
L
R(X)
SPS
R(X)
SPS
R(X)
SPS
R(X) F
Blocked by CWA
SPS
R(X) F
Blocked by 3.Har‐
mon.
ACT
F
Crossblock by
3.Harm.
SPS
F
Blocked by 5.Har‐
mon.
ACT
F
Blocked by 5.Har‐
mon.\phs A
Blocked by 5.Har‐
mon.\phs B
Blocked by 5.Har‐
mon.\phs C
Crossblock by
5.Harm.
SPS
R(X)
SPS
R(X)
SPS
R(X)
SPS
R(X) F
Blocked by ext. fault ACT
F
Blocked by ext.
fault\phs A
Blocked by ext.
fault\phs B
Blocked by ext.
fault\phs C
Crossbl. by ext.
fault
SPS
R(X)
SPS
R(X)
SPS
R(X)
SPS
R(X) F
CWA int. fault de‐
tected
SPS
R(X) F
>Block stage
SPS
O
Behavior
ENS
O
Health
ENS
O
Inactive
SPS
O
Pickup
ACD
F
Pickup\phs A
Pickup\phs B
Pickup\phs C
SPS
SPS
SPS
R(X)
R(X)
R(X)
CFC D
Totally Integrated
Automation Portal
Number
Group
901.1691. 87T diff. prot. 1\I-DIFF fast
11071.57
87T diff. prot. 1\I-DIFF fast
87T diff. prot. 1\I-DIFF fast
87T diff. prot. 1\I-DIFF fast
Line 1
Number
Group
21.1131.4 Process monitor\Closure de‐
681.300 tec.
21.1131.4 Process monitor\1pol.open
711.300 det.
21.821.23 87 Line diff. prot.\General
11.82
21.821.23 87 Line diff. prot.\General
11.501
21.821.23 87 Line diff. prot.\General
11.502
21.821.23 87 Line diff. prot.\General
11.503
21.821.23 87 Line diff. prot.\General
11.504
21.821.23 87 Line diff. prot.\General
11.507
21.821.23 87 Line diff. prot.\General
11.508
21.821.23 87 Line diff. prot.\General
11.52
21.821.23 87 Line diff. prot.\General
11.53
21.821.23 87 Line diff. prot.\General
11.54
21.821.23 87 Line diff. prot.\General
11.300
21.821.23 87 Line diff. prot.\General
11.301
21.821.23 87 Line diff. prot.\General
11.302
21.821.23 87 Line diff. prot.\General
11.304
21.821.23 87 Line diff. prot.\General
11.305
21.821.23 87 Line diff. prot.\General
11.306
21.821.23 87 Line diff. prot.\General
11.307
21.821.23 87 Line diff. prot.\General
11.313
21.821.23 87 Line diff. prot.\General
11.314
21.821.23 87 Line diff. prot.\General
11.315
21.821.23 87 Line diff. prot.\General
11.316
Signal
Type
Operate
ACT
Operate\phs A
Operate\phs B
Operate\phs C
SPS
SPS
SPS
Signal
Type
Closure
Source
BI
FK
Destination
CFC BO LED R
L
F
CFC D
L
F
CFC D
SPS
1-pole open
ACT
F
>Block function
SPS
O
>Test all devices on SPS
O
>Test all devices off SPS
O
>Test local device
on
>Test local device
off
>Function logout
on
>Function logout
off
Behavior
SPS
O
SPS
O
SPS
O
SPS
O
ENS
O
Health
ENS
O
Inactive
SPS
O
Test local device
SPS
act.
Test all devices activ SPS
O
Test remote device SPS
O
BI: Test all devices
SPS
O
Ctrl: Test all devices SPS
O
BI: Test local device SPS
O
Ctrl:Test local de‐
vice
Logged off via BI
SPS
O
SPS
O
Logged off via con‐ SPS
trol
Function logged off SPS
O
Alarm: Idiff too
high
O,F
SPS
R(X)
R(X)
R(X)
Source
BI
FK
Destination
CFC BO LED R
O
O
Totally Integrated
Automation Portal
Number
Group
21.821.55 87 Line diff. prot.\Remote
trip.
51.505
21.821.55 87 Line diff. prot.\Remote
trip.
51.52
21.821.55 87 Line diff. prot.\Remote
trip.
51.53
21.821.55 87 Line diff. prot.\Remote
trip.
51.54
21.821.55 87 Line diff. prot.\Remote
trip.
51.57
21.821.55 87 Line diff. prot.\Remote
trip.
51.300
21.821.55 87 Line diff. prot.\Remote
trip.
51.301
21.821.34 87 Line diff. prot.\I-DIFF
51.81
21.821.34 87 Line diff. prot.\I-DIFF
51.52
21.821.34 87 Line diff. prot.\I-DIFF
51.53
21.821.34 87 Line diff. prot.\I-DIFF
51.54
21.821.34 87 Line diff. prot.\I-DIFF
51.55
21.821.34 87 Line diff. prot.\I-DIFF
51.57
87 Line diff. prot.\I-DIFF
87 Line diff. prot.\I-DIFF
300.0
87 Line diff. prot.\I-DIFF
300.0
87 Line diff. prot.\I-DIFF
300.0
87 Line diff. prot.\I-DIFF
301.0
87 Line diff. prot.\I-DIFF
301.0
87 Line diff. prot.\I-DIFF
301.0
21.821.34 87 Line diff. prot.\I-DIFF
51.302
21.821.18 87 Line diff. prot.\I-DIFF fast
2
211.81
21.821.18 87 Line diff. prot.\I-DIFF fast
2
211.52
21.821.18 87 Line diff. prot.\I-DIFF fast
2
211.53
21.821.18 87 Line diff. prot.\I-DIFF fast
2
211.54
21.821.18 87 Line diff. prot.\I-DIFF fast
2
211.55
21.821.18 87 Line diff. prot.\I-DIFF fast
2
211.57
87 Line diff. prot.\I-DIFF fast
2
21.821.18 87 Line diff. prot.\I-DIFF fast
211.302 2
Signal
Type
>Intertrip phs ABC
SPS
L
O
Behavior
ENS
O
Health
ENS
O
Inactive
SPS
O
Operate
ACT
F
Operate transmitted ACT
O
Operate received
ACT
O
>Block stage
SPS
O
Behavior
ENS
O
Health
ENS
O
Inactive
SPS
O
Pickup
ACD
F
Operate
ACT
F
Operate\general
SPS
I diff.:A
I diff.:B
I diff.:C
I restr.:A
I restr.:B
I restr.:C
Remote stage inac‐
tive
>Block stage
CMV
CMV
CMV
CMV
CMV
CMV
SPS
O
SPS
O
Behavior
ENS
O
Health
ENS
O
Inactive
SPS
O
Pickup
ACD
F
Operate
ACT
F
Operate\general
SPS
Remote stage inac‐ SPS
tive
Source
BI
FK
Destination
CFC BO LED R
CFC D
U1.3, L1.1
U3.1
X
X
X
X
X
X
U3.1 L1.1
O
Totally Integrated
Automation Portal
Circuit breaker 1
Number
Group
201.4261. Circuit break.
500
201.4261. Circuit break.
501
201.4261. Circuit break.
504
201.4261. Circuit break.
502
201.4261. Circuit break.
503
201.4261. Circuit break.
53
201.4261. Circuit break.
300
201.4261. Circuit break.
301
201.4261. Circuit break.
303
201.4261. Circuit break.
306
201.4261. Circuit break.
311
201.4261. Circuit break.
312
201.4261. Circuit break.
313
201.4261. Circuit break.
317
201.4261. Circuit break.
58
201.6541. Manual close
500
201.6541. Manual close
501
201.6541. Manual close
300
201.4201. Control
53
201.4201. Control
58
201.4231. Interlocking
53
201.6151. CB test
53
201.6151. CB test
301
201.6151. CB test
302
201.6151. CB test
303
201.6151. CB test
304
201.1878 50BF Ad.CBF 1
1.82
201.1878 50BF Ad.CBF 1
1.503
Signal
Type
Source
BI
FK
Destination
CFC BO LED R
>Ready
SPS
L
O
>Acquisition block‐
ing
>Reset
AcqBlk&Subst
>Reset switch sta‐
tist.
External health
SPS
O
SPS
O
SPS
O
ENS
O
Health
ENS
O
Trip/open cmd.
SPS
O,F,S
Close command
SPS
O,F,S
Definitive trip
SPS
F
Op.ct.
INS
S
Break.-current phs A MV
F,S
Break.-current phs B MV
F,S
Break.-current phs C MV
F,S
Break. current
3I0/IN
Position
MV
F,S
DPC
O,S
>Input
SPS
O
>Block manual
close
Detected
SPS
O
SPS
O
Health
ENS
O
Cmd. with feedback DPC
O
Health
ENS
O
Health
ENS
O
Test execution
ENS
O
Trip command is‐
ENS
sued
Close command is‐ ENS
sued
Test canceled
ENS
O
>Block function
SPS
O
>CB defect
SPS
O
O
O
CFC D
Totally Integrated
Automation Portal
Number
Group
201.1878 50BF Ad.CBF 1
1.500
201.1878 50BF Ad.CBF 1
1.304
201.1878 50BF Ad.CBF 1
1.52
201.1878 50BF Ad.CBF 1
1.53
201.1878 50BF Ad.CBF 1
1.54
201.1878 50BF Ad.CBF 1
1.306
50BF Ad.CBF 1
201.1878 50BF Ad.CBF 1
1.305
201.1878 50BF Ad.CBF 1
1.55
50BF Ad.CBF 1
201.1878 50BF Ad.CBF 1
1.316
201.1878 50BF Ad.CBF 1
1.317
F:USART-AD-1FO
Number
Group
102.2311. General
53
102.1031. Channel 1\Prot.interface
6231.304
102.1031. Channel 1\Prot.interface
6231.307
E:ETH-BA-2EL
Number
Group
103.2311. General
53
103.1031. Channel 1\Line Mode
13411.30
4
103.1031. Channel 1\Line Mode
13411.53
103.1031. Channel 1\Line Mode
13411.30
5
2 device prot. com.
Number
Group
31.5131.3 Device combin.
01
Signal
Type
Source
BI
FK
Destination
CFC BO LED R
>Threshold sensi‐ SPS
tive
BI aux.ct. rout. miss. SPS
L
O
CFC D
O
Behavior
ENS
O
Health
ENS
O
Inactive
SPS
O
Trip T2
ACT
F
Trip T2\general
Retrip T1
SPS
ACT
Pickup
ACD
Pickup\general
CB failure pole
SPS
ACD
Oper. del. by inv.
meas.
SPS
Signal
Type
Health
ENS
L
O
Channel Live
SPS
O
Health
ENS
O
Signal
Type
R(X)
F
F
R(X)
F
F
Source
BI
FK
Source
BI
FK
Destination
CFC BO LED R
Destination
CFC BO LED R
Health
ENS
L
O
Channel Live
SPS
O
Health
ENS
O
Redund. Channel
Live
SPS
O
Signal
Type
Status of topo. re‐
cog.
ENS
Source
BI
FK
Destination
CFC BO LED R
L
O
CFC D
CFC D
CFC D
Totally Integrated
Automation Portal
Number
Group
31.5131.3 Device combin.
02
31.5131.3 Device combin.
03
31.5131.3 Device combin.
04
31.5131.3 Device combin.
05
31.5131.3 Device combin.
06
31.5131.3 Device combin.
07
31.5131.3 Device combin.
09
31.5161.8 Prot. interf.1
1
31.5161.5 Prot. interf.1
00
31.5161.5 Prot. interf.1
2
31.5161.3 Prot. interf.1
03
31.5161.3 Prot. interf.1
20
31.5161.3 Prot. interf.1
19
31.5161.3 Prot. interf.1
17
31.5161.3 Prot. interf.1
16
31.5161.5 Prot. interf.1
3
31.5161.3 Prot. interf.1
02
31.5161.3 Prot. interf.1
01
31.5161.3 Prot. interf.1
21
31.5161.3 Prot. interf.1
18
31.5161.3 Prot. interf.1
43
31.5161.3 Prot. interf.1
42
31.5161.3 Prot. interf.1
41
Main menu
Number
Group
Signal
Type
Topology is
ENS
L
O
Devices form
ENS
O
Number of detect. INS
dev.
Fct. logout device 1 SPS
O
Fct. logout device 2 SPS
O
Device 1 available
SPS
O
Device 2 available
SPS
O
>Block stage
SPS
O
>Sync reset
SPS
O
Behavior
ENS
O
Connection broken SPS
O
Time delay jump
SPS
O
Time delay different SPS
O
Error rate / hour
SPS
exc.
Error rate / min exc. SPS
O
Health
ENS
O
Status of lay. 3 and ENS
4
Status of lay. 1 and ENS
2
PI synchronized
SPS
O
Time delay excee‐
ded
Partner
SPS
O
INS
O
Reset measure‐
SPC
ments
Reset synchroniza‐ SPC
tion
O
Signal
Logs
Operational log
Logs
Fault log
Measurements\Transformer Fund./sym.comp.
side 1
Type
Source
BI
FK
Destination
CFC BO LED R
CFC D
O
O
O
O
O
Source
Destination
BI
FK CFC BO LED R
X1.1
X1.3
X1.2
L
CFC D
Totally Integrated
Automation Portal
Number
Group
Signal
Type
Measurements\Transformer Fund./sym.comp.
side 2
Source
Destination
BI
FK CFC BO LED R
X1.4
L
CFC D
*Signal marked as favorite signal
No Binary Input information routed
Binary output
Binary output Module
Termi‐
nals
User label
BinaryOutput
1.3
BinaryOutput
1.3
BinaryOutput
1.3
BinaryOutput
3.1
BinaryOutput
3.1
BinaryOutput
3.1
BinaryOutput
3.1
Base mod‐
ule
Base mod‐
ule
Base mod‐
ule
Expansion
module 3
Expansion
module 3
Expansion
module 3
Expansion
module 3
Function keys
Function keys
Module
FunctionKey 1
FunctionKey 2
Base module Operational log
Base module Fund./sym.comp.
FunctionKey 3
FunctionKey 4
Base module Fault log
Base module Fund./sym.comp.
LEDs
LEDs
Module
Led 1.1
1D5-1D6 BO-F make 1.3
1D5-1D6 BO-F make 1.3
1D5-1D6 BO-F make 1.3
3B10-3B
9
3B10-3B
9
3B10-3B
9
3B10-3B
9
BO-F make 3.1
BO-F make 3.1
BO-F make 3.1
BO-F make 3.1
User label
User label
Led 1.2
Base module Operate general,
Operat...
Base module Operate general,
Operat...
Base module Operate general
Led 1.3
Base module Operate general
Led 1.16
Base module Functions in Test
mode
Led 1.1
Configured signal
Type Value
Number
Transformer diff. 1:87T diff. prot. 1:IDIFF:Operate:general
Transformer side 1:87N REF 1:Oper‐
ate:general
Line 1:87 Line diff. prot.:I-DIFF:Oper‐
ate:general
Transformer diff. 1:87T diff. prot. 1:IDIFF:Operate:general
Transformer side 1:87N REF 1:Oper‐
ate:general
Line 1:87 Line diff. prot.:I-DIFF:Oper‐
ate:general
Line 1:87 Line diff. prot.:I-DIFF fast
2:Operate:general
SPS
U
SPS
U
901.1691.110
41.57
911.10081.57
SPS
U
SPS
U
SPS
U
SPS
U
SPS
U
Configured signal
Type Value
Application:General:Operational log
Transformer side 1:Fund./
sym.comp.:Fund./sym.comp.
Application:General:Fault log
Transformer side 2:Fund./
sym.comp.:Fund./sym.comp.
21.821.3451.5
7
901.1691.110
41.57
911.10081.57
21.821.3451.5
7
21.821.18211.
57
Number
X
X
X
X
Configured signal
Type Value
Number
Line 1:87 Line diff. prot.:I-DIFF:Oper‐
ate:general
Line 1:87 Line diff. prot.:I-DIFF fast
2:Operate:general
Transformer diff. 1:87T diff. prot. 1:IDIFF:Operate:general
Transformer side 1:87N REF 1:Oper‐
ate:general
Application:General:Functions in Test
mode
SPS
L
21.821.3451.57
SPS
L
SPS
L
SPS
L
21.821.18211.5
7
901.1691.1104
1.57
911.10081.57
SPS
U
91.329
Totally Integrated
Automation Portal
7UT86
Communication mapping
This folder is empty.
Totally Integrated
Automation Portal
7UT86
Settings
Device settings
Settings
Edit mode
Number settings groups
Activat. of settings group
DIGSI 5 uses the following interface
Operation-panel language
Binary input channel threshold
Used time stamp in GOOSE subscriptions
Hide settings in IEC 61850 structure
Hide SIPROTEC extensions in IEC 61850 structure
Reserv.time for com.prot.
Use dynamic reporting
Block IEC 61850 settings changes
Access point used in Edition1
Station name
Activate device functionality
Settings
Voltage variant
Integrated Ethernet interface (port J)
Significant feature
Select function-point class or classless
Value
secondary
1
settings group 1
172.16.60.60 (Port J)
English (United States)
Low: 44 V, High: 88 V
On message reception
Hide all settings
Hide all SIPROTEC extensions
120 s
True
False
No access point is specified for the SCD import.
Project1 (Substation name)
Value
DC 60 V to 250 V, AC 100 V to 230 V
DIGSI 5 connection and IEC 61850 inclusive GOOSE
Base + 275
General \Device
Number
91.101
91.102
91.115
91.138
91.164
Settings
Rated frequency
Minimum operate time
Set. format residu. comp.
Block monitoring dir.
Station name
Value
All: 50 Hz
All: 0 s
All: Kr, Kx
All: off
All: Project1
General \Chatter blocking
Number
91.123
91.127
91.124
91.125
91.137
Settings
No. permis.state changes
Initial test time
No. of chatter tests
Chatter idle time
Subsequent test time
Value
All: 0
All: 1 s
All: 0
All: 1 min
All: 2 s
General \Measurements
Number
91.162
91.163
91.111
91.112
Settings
Blk setting change
Reserv.time for com.prot.
Energy restore interval
Energy restore time
Value
Settings group 1: false
All: 120 s
Settings group 1: 10 min
Settings group 1: none
Totally Integrated
Automation Portal
General \Control
Number
91.120
91.121
91.118
Settings
Energy restore
Energy restore by A.time
Enable sw.auth. station
Value
Settings group 1: latest value
Settings group 1: false
All: false
General \Spontan.indic.
Number
91.119
Settings
Multiple sw.auth. levels
Value
All: false
General \CFC
Number
91.152
Settings
Specific sw. authorities
Value
All: false
General \Test support
Number
91.139
91.161
Settings
Fault-display
CFC chart quality handling
Value
All: with pickup
All: manual
Localization
Number
6211.139
Settings
Unit system
Value
All: SI
Time settings
General
Settings
Date format
Value
All: DD.MM.YYYY
Time source
Settings
Fault indication after
Time source 1
Time source 2
Time zone time source 1
Time zone time source 2
Sync. latency time src.1
Sync. latency time src.2
Value
All: 600 s
none
none
All: local
All: local
All: 0 µs
All: 0 µs
Time zone and daylight saving time
Settings
Time zone offset to UTC
Offset daylight sav. time
Switch daylight sav. time
Start of daylight sav. time
End of daylight sav. time
Value
All: 60 min
All: 60 min
true
Last Sunday in March at 2:00 AM
Last Sunday in October at 3:00 AM
Totally Integrated
Automation Portal
Pulse per second (Port G)
Settings
Sync. latency PPS
Assumed SmpSynch
Value
All: 0 µs
All: global
Sample synchronization
Settings
Holdover
Value
All: Enable
Power system \General
General
Number
11.2311.101
Settings
Phase sequence
Value
All: ABC
Power system \Meas.point I-3ph 1
CT 3-phase \General
Number
11.931.8881.115
11.931.8881.127
11.931.8881.130
Settings
CT connection
Tracking
Measuring-point ID
Value
All: 3-phase
All: active
All: 1
CT 3-phase \CT phases
Number
11.931.8881.101
11.931.8881.102
11.931.8881.117
11.931.8881.118
11.931.8881.116
11.931.8881.114
11.931.8881.107
11.931.8881.108
11.931.8881.109
Settings
Rated primary current
Rated secondary current
Current range
Internal CT type
Neutr.point in dir.of ref.obj
Inverted phases
CT error changeover
CT error A
CT error B
Value
All: 300 A
All: 1 A
All: 100 x IR
All: CT protection
All: yes
All: none
All: 1
All: 5 %
All: 15 %
CT 3-phase \MP disconnection
Number
11.931.8881.173
11.931.8881.112
Settings
Current check
I< threshold
Value
All: active
All: 0.100 A
CT 1
Number
11.931.3841.103
11.931.3841.117
Settings
Magnitude correction
Phase
Value
All: 1
All: I A
Totally Integrated
Automation Portal
CT 2
Number
11.931.3842.103
11.931.3842.117
Settings
Magnitude correction
Phase
Value
All: 1
All: I B
CT 3
Number
11.931.3843.103
11.931.3843.117
Settings
Magnitude correction
Phase
Value
All: 1
All: I C
Supv. balan. I
Number
11.931.2491.1
11.931.2491.101
11.931.2491.102
11.931.2491.6
Settings
Mode
Release threshold
Threshold min/max
Delay failure indication
Value
Settings group 1: on
Settings group 1: 0.50 A
Settings group 1: 0.5
Settings group 1: 5 s
Supv. ph.seq.I
Number
11.931.2551.1
11.931.2551.6
11.931.2551.102
Settings
Mode
Delay failure indication
Release threshold
Value
Settings group 1: on
Settings group 1: 5 s
Settings group 1: 0.50 A
Saturat. det.
Number
11.931.17731.101
Settings
CT saturation threshold
Value
Settings group 1: 8.00 A
Power system \Meas.point I-3ph 2
CT 3-phase \General
Number
11.932.8881.115
11.932.8881.127
11.932.8881.130
Settings
CT connection
Tracking
Measuring-point ID
Value
All: 3-phase
All: active
All: 2
CT 3-phase \CT phases
Number
11.932.8881.101
11.932.8881.102
11.932.8881.117
11.932.8881.118
11.932.8881.116
11.932.8881.114
Settings
Rated primary current
Rated secondary current
Current range
Internal CT type
Neutr.point in dir.of ref.obj
Inverted phases
Value
All: 4000 A
All: 1 A
All: 100 x IR
All: CT protection
All: yes
All: none
CT 3-phase \MP disconnection
Number
11.932.8881.173
11.932.8881.112
Settings
Current check
I< threshold
Value
All: active
All: 0.100 A
Totally Integrated
Automation Portal
CT 1
Number
11.932.3841.103
11.932.3841.117
Settings
Magnitude correction
Phase
Value
All: 1
All: I A
CT 2
Number
11.932.3842.103
11.932.3842.117
Settings
Magnitude correction
Phase
Value
All: 1
All: I B
CT 3
Number
11.932.3843.103
11.932.3843.117
Settings
Magnitude correction
Phase
Value
All: 1
All: I C
Supv. balan. I
Number
11.932.2491.1
11.932.2491.101
11.932.2491.102
11.932.2491.6
Settings
Mode
Release threshold
Threshold min/max
Delay failure indication
Value
Settings group 1: off
Settings group 1: 0.50 A
Settings group 1: 0.5
Settings group 1: 5 s
Supv. ph.seq.I
Number
11.932.2551.1
11.932.2551.6
11.932.2551.102
Settings
Mode
Delay failure indication
Release threshold
Value
Settings group 1: off
Settings group 1: 5 s
Settings group 1: 0.50 A
Power system \Meas.point V-3ph 1
VT 3-phase
Number
11.941.8911.101
11.941.8911.102
11.941.8911.103
11.941.8911.104
11.941.8911.106
11.941.8911.111
11.941.8911.130
11.941.8911.136
Settings
Rated primary voltage
Rated secondary voltage
Matching ratio Vph / VN
VT connection
Inverted phases
Tracking
Measuring-point ID
Internal VT type
Value
All: 150 kV
All: 110 V
All: 1.73
All: 3 ph-to-gnd volt. + VN
All: none
All: active
All: 5
All: Voltage transformer
VT 1
Number
11.941.3811.103
11.941.3811.108
Settings
Magnitude correction
Phase
Value
All: 1
All: V A
Totally Integrated
Automation Portal
VT 2
Number
11.941.3812.103
11.941.3812.108
Settings
Magnitude correction
Phase
Value
All: 1
All: V B
VT 3
Number
11.941.3813.103
11.941.3813.108
Settings
Magnitude correction
Phase
Value
All: 1
All: V C
VT 4
Number
11.941.3814.103
11.941.3814.108
Settings
Magnitude correction
Phase
Value
All: 1
All: VN
Supv. balan. V
Number
11.941.2521.1
11.941.2521.101
11.941.2521.102
11.941.2521.6
Settings
Mode
Release threshold
Threshold min/max
Delay failure indication
Value
Settings group 1: on
Settings group 1: 55 V
Settings group 1: 0.75
Settings group 1: 5 s
Supv. ph.seq.V
Number
11.941.2581.1
11.941.2581.6
Settings
Mode
Delay failure indication
Value
Settings group 1: on
Settings group 1: 5 s
Supv. sum V
Number
11.941.2461.1
11.941.2461.3
11.941.2461.6
Settings
Mode
Threshold
Delay failure indication
Value
Settings group 1: on
Settings group 1: 27.5 V
Settings group 1: 5 s
VT miniatureCB
Number
11.941.2641.101
Settings
Response time
Value
Settings group 1: 0 s
Power system \Meas.point I-1ph 1
General
Number
11.951.2311.101
11.951.2311.102
11.951.2311.103
11.951.2311.104
11.951.2311.116
11.951.2311.105
11.951.2311.130
Settings
Rated primary current
Rated secondary current
Current range
Internal CT type
Term. 1,3,5,7 in dir. of obj.
Tracking
Measuring-point ID
Value
All: 300 A
All: 1 A
All: 100 x IR
All: CT protection
All: yes
All: inactive
All: 3
Totally Integrated
Automation Portal
CT 1
Number
11.951.3841.103
11.951.3841.117
Settings
Magnitude correction
Phase
Value
All: 1
All: Ix
Settings
Scaling COMTRADE
COMTRADE revision year
Mode
Value
All: Secondary values
All: COMTRADE 1999
Settings group 1: on
Settings
Fault recording
Storage
Maximum record time
Pre-trigger time
Post-trigger time
Manual record time
Sampling frequency
Sampl. freq. IEC 61850 rec.
Cal.zero.seq.cur.channel
Cal.zero seq.volt.channel
Value
All: with pickup
All: always
All: 5 s
All: 0.5 s
All: 0.5 s
All: 0.5 s
All: 2 kHz
All: 1 kHz
All: no
All: no
General \Rated values
Number
911.91.103
911.91.102
911.91.101
Settings
Rated apparent power
Rated voltage
Rated current
Value
All: 58 MVA
All: 150 kV
All: 223 A
General \Side data
Number
911.91.149
911.91.104
911.91.163
911.91.130
911.91.210
911.91.214
911.91.215
911.91.223
Settings
Neutral point
Winding configuration
Vector group numeral
Side number
MI3ph1 usesMeasP with ID
M I-1ph uses MeasP with ID
CT mismatch M I-3ph 1
CT mismatch M I-1ph
Value
Settings group 1: grounded
Settings group 1: Y (Wye)
All: 0
All: Side 1
All: 1
All: 3
All: 1.344
All: 1.344
General \Measurements
Number
911.91.158
Settings
P, Q sign
Value
Settings group 1: not reversed
Recording \General
General
Number
81.2701.175
81.2701.176
81.2701.1
Recording \Fault recorder
Control
Number
81.791.2761.130
81.791.2761.131
81.791.2761.111
81.791.2761.112
81.791.2761.113
81.791.2761.116
81.791.2761.140
81.791.2761.141
81.791.2761.129
81.791.2761.132
Transformer side 1 \General
Totally Integrated
Automation Portal
Transformer side 1 \Process monitor
Transformer side 1 \Inrush detect.
Inrush detect.
Number
911.4141.1
911.4141.106
911.4141.111
911.4141.110
911.4141.102
911.4141.112
911.4141.109
911.4141.114
Settings
Mode
Operat.-range limit Imax
Blocking with CWA
Blocking with 2. harmonic
2nd harmonic content
Cross-blocking
Cross-blocking time
Start flt.rec
Value
All: on
Settings group 1: 9.073 A
Settings group 1: yes
Settings group 1: yes
Settings group 1: 15 %
Settings group 1: no
Settings group 1: 0.06 s
Settings group 1: yes
Transformer side 1 \50/51 OC-3ph-A1
Definite-T 1 \General
Number
911.201.661.1
911.201.661.2
911.201.661.11
911.201.661.26
911.201.661.27
911.201.661.8
911.201.661.120
911.201.661.3
911.201.661.4
911.201.661.102
911.201.661.101
911.201.661.6
Settings
Mode
Operate & flt.rec. blocked
1-pole operate allowed
Dynamic settings
Blk. w. inrush curr. detect.
Method of measurement
I0 elimination
Threshold
Dropout ratio
Pickup delay
Dropout delay
Operate delay
Value
Settings group 1: off
Settings group 1: no
Settings group 1: no
All: no
Settings group 1: no
Settings group 1: fundamental comp.
Settings group 1: no
Settings group 1: 4.811 A
Settings group 1: 0.95
Settings group 1: 0 s
Settings group 1: 0 s
Settings group 1: 0.3 s
Definite-T 2 \General
Number
911.201.662.1
911.201.662.2
911.201.662.11
911.201.662.26
911.201.662.27
911.201.662.8
911.201.662.120
911.201.662.3
911.201.662.4
911.201.662.102
911.201.662.101
911.201.662.6
Settings
Mode
Operate & flt.rec. blocked
1-pole operate allowed
Dynamic settings
Blk. w. inrush curr. detect.
Method of measurement
I0 elimination
Threshold
Dropout ratio
Pickup delay
Dropout delay
Operate delay
Value
Settings group 1: off
Settings group 1: no
Settings group 1: no
All: no
Settings group 1: no
Settings group 1: fundamental comp.
Settings group 1: no
Settings group 1: 6.415 A
Settings group 1: 0.95
Settings group 1: 0 s
Settings group 1: 0 s
Settings group 1: 0.1 s
Inverse-T 1 \General
Number
911.201.691.1
911.201.691.2
911.201.691.11
911.201.691.26
Settings
Mode
Operate & flt.rec. blocked
1-pole operate allowed
Dynamic settings
Value
Settings group 1: off
Settings group 1: no
Settings group 1: no
All: no
Totally Integrated
Automation Portal
Number
911.201.691.27
911.201.691.8
911.201.691.120
911.201.691.3
911.201.691.108
911.201.691.130
911.201.691.113
911.201.691.131
911.201.691.101
911.201.691.115
Settings
Blk. w. inrush curr. detect.
Method of measurement
I0 elimination
Threshold
Pickup delay
Type of character. curve
Min. time of the curve
Reset
Time dial
Additional time delay
Value
Settings group 1: no
Settings group 1: fundamental comp.
Settings group 1: no
Settings group 1: 4.811 A
Settings group 1: 0 s
Settings group 1: IEC normal inverse
Settings group 1: 0 s
Settings group 1: disk emulation
Settings group 1: 1
Settings group 1: 0 s
Settings
Mode
Operate & flt.rec. blocked
Threshold
Slope
Operate delay
Value
Settings group 1: on
Settings group 1: no
Settings group 1: 0.2 I/IrObj
Settings group 1: 0.3
Settings group 1: 0 s
General \Rated values
Number
912.91.103
912.91.102
912.91.101
Settings
Rated apparent power
Rated voltage
Rated current
Value
All: 58 MVA
All: 15 kV
All: 2232 A
General \Side data
Number
912.91.149
912.91.104
912.91.163
912.91.130
912.91.210
912.91.215
Settings
Neutral point
Winding configuration
Vector group numeral
Side number
MI3ph1 usesMeasP with ID
CT mismatch M I-3ph 1
Value
Settings group 1: grounded
Settings group 1: D (Delta)
All: 0
All: Side 2
All: 2
All: 1.792
Transformer side 1 \87N REF 1
87N REF 1
Number
911.10081.1
911.10081.2
911.10081.103
911.10081.105
911.10081.109
Transformer side 2 \General
Transformer side 2 \Process monitor
Transformer side 2 \Inrush detect.
Inrush detect.
Number
912.4141.1
912.4141.106
912.4141.111
912.4141.110
912.4141.102
912.4141.112
912.4141.109
912.4141.114
Settings
Mode
Operat.-range limit Imax
Blocking with CWA
Blocking with 2. harmonic
2nd harmonic content
Cross-blocking
Cross-blocking time
Start flt.rec
Value
All: on
Settings group 1: 1.804 A
Settings group 1: yes
Settings group 1: yes
Settings group 1: 15 %
Settings group 1: no
Settings group 1: 0.06 s
Settings group 1: yes
Totally Integrated
Automation Portal
Transformer side 2 \50/51 OC-3ph-A1
Definite-T 1 \General
Number
912.201.661.1
912.201.661.2
912.201.661.11
912.201.661.26
912.201.661.27
912.201.661.8
912.201.661.3
912.201.661.4
912.201.661.102
912.201.661.101
912.201.661.6
Settings
Mode
Operate & flt.rec. blocked
1-pole operate allowed
Dynamic settings
Blk. w. inrush curr. detect.
Method of measurement
Threshold
Dropout ratio
Pickup delay
Dropout delay
Operate delay
Value
Settings group 1: off
Settings group 1: no
Settings group 1: no
All: no
Settings group 1: no
Settings group 1: fundamental comp.
Settings group 1: 0.361 A
Settings group 1: 0.95
Settings group 1: 0 s
Settings group 1: 0 s
Settings group 1: 0.3 s
Definite-T 2 \General
Number
912.201.662.1
912.201.662.2
912.201.662.11
912.201.662.26
912.201.662.27
912.201.662.8
912.201.662.3
912.201.662.4
912.201.662.102
912.201.662.101
912.201.662.6
Settings
Mode
Operate & flt.rec. blocked
1-pole operate allowed
Dynamic settings
Blk. w. inrush curr. detect.
Method of measurement
Threshold
Dropout ratio
Pickup delay
Dropout delay
Operate delay
Value
Settings group 1: off
Settings group 1: no
Settings group 1: no
All: no
Settings group 1: no
Settings group 1: fundamental comp.
Settings group 1: 0.481 A
Settings group 1: 0.95
Settings group 1: 0 s
Settings group 1: 0 s
Settings group 1: 0.1 s
Inverse-T 1 \General
Number
912.201.691.1
912.201.691.2
912.201.691.11
912.201.691.26
912.201.691.27
912.201.691.8
912.201.691.3
912.201.691.108
912.201.691.130
912.201.691.113
912.201.691.131
912.201.691.101
912.201.691.115
Settings
Mode
Operate & flt.rec. blocked
1-pole operate allowed
Dynamic settings
Blk. w. inrush curr. detect.
Method of measurement
Threshold
Pickup delay
Type of character. curve
Min. time of the curve
Reset
Time dial
Additional time delay
Value
Settings group 1: off
Settings group 1: no
Settings group 1: no
All: no
Settings group 1: no
Settings group 1: fundamental comp.
Settings group 1: 0.361 A
Settings group 1: 0 s
Settings group 1: IEC normal inverse
Settings group 1: 0 s
Settings group 1: disk emulation
Settings group 1: 1
Settings group 1: 0 s
Transformer diff. 1 \87T diff. prot. 1
General
Number
901.1691.2311.100
901.1691.2311.105
Settings
Meas. gnd. current side 1
CT mismatch side 1 M3ph 1
Value
Settings group 1: yes
All: 1.344
Totally Integrated
Automation Portal
Number
901.1691.2311.109
901.1691.2311.110
901.1691.2311.191
901.1691.2311.151
901.1691.2311.155
901.1691.2311.156
Settings
CT mismatch side 1 M1ph
CT mismatch side 2 M3ph 1
Reference side is
MU-ID Side 1 Mp3ph 1
MU-ID Side 1 Mp1ph
MU-ID Side 2 Mp3ph 1
Value
All: 1.344
All: 1.792
All: Side 2
All: 1
All: 3
All: 2
I-DIFF \General
Number
901.1691.11041.1
901.1691.11041.2
901.1691.11041.6
Settings
Mode
Operate & flt.rec. blocked
Operate delay
Value
Settings group 1: on
Settings group 1: no
Settings group 1: 0 s
I-DIFF \Operate curve
Number
901.1691.11041.3
901.1691.11041.100
901.1691.11041.101
901.1691.11041.102
901.1691.11041.103
Settings
Threshold
Slope 1
Intersection 1 Irest
Slope 2
Intersection 2 Irest
Value
Settings group 1: 0.30 I/IrObj
Settings group 1: 0.3
Settings group 1: 0.1 I/IrObj
Settings group 1: 0.80
Settings group 1: 2.5 I/IrObj
I-DIFF \Starting detection
Number
901.1691.11041.106
901.1691.11041.107
901.1691.11041.108
901.1691.11041.109
Settings
Starting detection
Thresh. startup detection
Factor increasing char.
Max. perm. Start. time
Value
Settings group 1: no
Settings group 1: 0.1 I/IrObj
Settings group 1: 2
Settings group 1: 5 s
I-DIFF \DC offset detection
Number
901.1691.11041.110
Settings
Factor increasing char. DC
Value
Settings group 1: 2.3
I-DIFF \Inrush blocking
Number
901.1691.11041.115
901.1691.11041.116
901.1691.11041.117
901.1691.11041.118
Settings
Blocking with 2. harmonic
2nd harmonic content
Crossblock. time 2nd har.
Blocking with CWA
Value
Settings group 1: yes
Settings group 1: 15 %
Settings group 1: 0 s
Settings group 1: yes
I-DIFF \Overexcit. blocking
Number
901.1691.11041.121
901.1691.11041.122
901.1691.11041.123
901.1691.11041.124
901.1691.11041.125
901.1691.11041.126
901.1691.11041.127
Settings
Blocking with 3rd harm.
3rd harmonics content
Crossblock. time 3rd har.
Blocking with 5th harm.
5th harmonics content
Crossblock. time 5th har.
Limit Idiff 3., 5. harmonics
Value
Settings group 1: no
Settings group 1: 30 %
Settings group 1: 0 s
Settings group 1: no
Settings group 1: 30 %
Settings group 1: 0 s
Settings group 1: 1.5 I/IrObj
Totally Integrated
Automation Portal
I-DIFF \Ext. fault detection
Number
901.1691.11041.128
901.1691.11041.129
901.1691.11041.130
Settings
Threshold add-on stabiliz.
Time of add-on stabiliz.
Crossblk. time add-on st.
Value
Settings group 1: 2 I/IrObj
Settings group 1: 0.3 s
Settings group 1: 0.3 s
I-DIFF fast
Number
901.1691.11071.1
901.1691.11071.3
901.1691.11071.6
901.1691.11071.100
Settings
Mode
Threshold
Operate delay
Operate & flt.rec. blocked
Value
Settings group 1: off
Settings group 1: 7.5 I/IrObj
Settings group 1: 0 s
Settings group 1: no
General \Rated values
Number
921.9421.104
Settings
Rated current
Value
All: 223 A
General \Power-system data
Number
921.9421.214
921.9421.223
Settings
M I-1ph uses MeasP with ID
CT mismatch M I-1ph
Value
All: 3
All: 1.34
General \Rated values
Number
21.9001.101
21.9001.102
21.9001.103
Settings
Rated current
Rated voltage
Rated apparent power
Value
All: 300 A
All: 150 kV
All: 77.9 MVA
General \Line data
Number
21.9001.149
21.9001.112
21.9001.148
21.9001.113
21.9001.114
21.9001.108
21.9001.104
21.9001.105
21.9001.119
21.9001.111
21.9001.110
Settings
Neutral point
C1 per length unit
C0 per length unit
X per length unit
Line length
Line angle
Kr
Kx
CT saturation detection
Series compensation
Series capacit. reactance
Value
Settings group 1: grounded
Settings group 1: 0.059289 µF/km
Settings group 1: 0.059289 µF/km
Settings group 1: 0.008855 Ω/km
Settings group 1: 60 km
Settings group 1: 85 °
Settings group 1: 1
Settings group 1: 1
All: no
Settings group 1: no
Settings group 1: 0 Ω
Transform. neut.p 1 \General
Line 1 \General
Totally Integrated
Automation Portal
General \Measurements
Number
21.9001.158
Settings
P, Q sign
Value
Settings group 1: not reversed
Closure detec.
Number
21.1131.4681.101
21.1131.4681.102
21.1131.4681.103
Settings
Operating mode
Action time after closure
Min. time feeder open
Value
Settings group 1: Manual close only
Settings group 1: 0.05 s
Settings group 1: 0.25 s
1pol.open det.
Number
21.1131.4711.101
Settings
Operating mode
Value
Settings group 1: with measurement
General
Number
21.821.2311.1
21.821.2311.102
21.821.2311.104
Settings
Mode
Min. current for release
Supervision Idiff
Value
Settings group 1: on
Settings group 1: 0 A
All: yes: block diff. prot.
Remote trip. \General
Number
21.821.5551.100
21.821.5551.101
Settings
Transmitting
Receiving
Value
Settings group 1: yes
Settings group 1: yes
Remote trip. \Intertrip
Number
21.821.5551.103
21.821.5551.104
Settings
Send delay
Send prolongation
Value
Settings group 1: 0.02 s
Settings group 1: 0 s
I-DIFF
Number
21.821.3451.1
21.821.3451.2
21.821.3451.3
21.821.3451.101
21.821.3451.6
Settings
Mode
Operate & flt.rec. blocked
Threshold
Thresh. switch onto fault
Operate delay
Value
Settings group 1: on
Settings group 1: no
Settings group 1: 0.10 A
Settings group 1: 0.10 A
Settings group 1: 0 s
I-DIFF fast 2
Number
21.821.18211.1
21.821.18211.2
21.821.18211.3
21.821.18211.101
Settings
Mode
Operate & flt.rec. blocked
Threshold
Thresh. switch onto fault
Value
Settings group 1: on
Settings group 1: no
Settings group 1: 0.50 A
Settings group 1: 0.50 A
Line 1 \Process monitor
Line 1 \87 Line diff. prot.
Totally Integrated
Automation Portal
Circuit breaker 1 \General
General \Ref. for %-values
Number
201.2311.101
Settings
Rated normal current
Value
All: 4000 A
General \Breaker settings
Number
201.2311.112
Settings
Current thresh. CB open
Value
All: 0.40 A
Settings
Reset of trip command
Value
All: with I<
Settings
Output time
Indicat. of breaking values
Value
All: 0.1 s
All: always
Settings
Action time
CB open dropout delay
Value
Settings group 1: 0.3 s
Settings group 1: 0 s
Settings
Control model
SBO time-out
Feedback monitoring time
Check switching authority
Check if pos. is reached
Check double activat. blk.
Check blk. by protection
Value
All: SBO w. enh. security
All: 30 s
All: 1 s
All: yes
All: yes
All: yes
All: yes
Settings
Dead time
Trip only
Consider current criterion
Value
All: 0.1 s
All: false
All: false
Circuit breaker 1 \Trip logic
Trip logic
Number
201.5341.103
Circuit breaker 1 \Circuit break.
Circuit break.
Number
201.4261.101
201.4261.105
Circuit breaker 1 \Manual close
Manual close
Number
201.6541.101
201.6541.102
Circuit breaker 1 \Control
Control
Number
201.4201.101
201.4201.102
201.4201.103
201.4201.104
201.4201.105
201.4201.106
201.4201.107
Circuit breaker 1 \CB test
CB test
Number
201.6151.101
201.6151.102
201.6151.103
Totally Integrated
Automation Portal
Circuit breaker 1 \50BF Ad.CBF 1
50BF Ad.CBF 1
Number
201.18781.1
201.18781.105
201.18781.107
201.18781.103
201.18781.104
201.18781.108
201.18781.102
201.18781.101
201.18781.109
201.18781.110
201.18781.112
201.18781.120
201.18781.121
201.18781.122
201.18781.123
201.18781.154
201.18781.155
*Setting marked as favorite setting
Settings
Mode
Holding int. start signal
Start via binary input
CB aux.cont. crit. allowed
Dropout
Retrip after T1
Threshold phase current
Threshold sensitive
Delay T1 for 3-pole retrip
Delay T2 for 3-pole trip
Minimum operate time
3I0 criterion
I2 criterion
Threshold 3I0 dir. release
Threshold I2 dir. release
Immediate dropout
BI start external latch
Value
Settings group 1: on
Settings group 1: yes
All: no
Settings group 1: w. 'CB pos. closed 3p.'
Settings group 1: w. aux.c. and curr.crit.
Settings group 1: no
Settings group 1: 0.50 A
Settings group 1: 0.40 A
Settings group 1: 0.05 s
Settings group 1: 0.13 s
Settings group 1: 0.1 s
All: Plausibility check
All: Plausibility check
Settings group 1: 13.333 A
Settings group 1: 1.00 A
Settings group 1: true
Settings group 1: true
Totally Integrated
Automation Portal
7UT86
Group warning
Totally Integrated
Automation Portal
1.2 ( Page11 - 3)
Group warning - Data flow /Task: Event-triggered - Partition_1 (1.1 / 3.2)
2.1 ( Page11 - 4)
Totally Integrated
Automation Portal
1.1 ( Page11 - 2)
Group warning - Data flow /Task: Event-triggered - Partition_1 (1.2 / 3.2)
2.2 ( Page11 - 5)
Totally Integrated
Automation Portal
Group warning - Data flow /Task: Event-triggered - Partition_1 (2.1 / 3.2)
2.2 ( Page11 - 5)
1.1 ( Page11 - 2)
3.1 ( Page11 - 6)
Totally Integrated
Automation Portal
Group warning - Data flow /Task: Event-triggered - Partition_1 (2.2 / 3.2)
2.1 ( Page11 - 4)
1.2 ( Page11 - 3)
3.2 ( Page11 - 7)
Totally Integrated
Automation Portal
Group warning - Data flow /Task: Event-triggered - Partition_1 (3.1 / 3.2)
3.2 ( Page11 - 7)
2.1 ( Page11 - 4)
Totally Integrated
Automation Portal
Group warning - Data flow /Task: Event-triggered - Partition_1 (3.2 / 3.2)
3.1 ( Page11 - 6)
2.2 ( Page11 - 5)
Totally Integrated
Automation Portal
Totally Integrated
Automation Portal
Group warning - Control flow /Task: Event-triggered
Run sequence
1
Object/parameter
Operand
Unit
Additional tasks
Run sequence
or10_1
Type
Task
Comment
Object/parameter
OR10
default
OR
X1
Operand
Power system.Meas.point I-3ph
1.Supv. balan. I.Failure [BOOL]
Type
Bool
Task
Comment
Object/parameter
X1
X2
Type
Bool
Task
Comment
Object/parameter
X2
X3
Type
Bool
Task
Comment
Object/parameter
X3
X4
Type
Bool
Task
Comment
Object/parameter
X4
X5
Type
Bool
Task
Comment
Object/parameter
X5
X6
Type
Bool
Task
Comment
Object/parameter
X6
X7
Type
Bool
Task
Comment
Object/parameter
X7
X8
Unit
Additional tasks
Run sequence
Operand
Power system.Meas.point I-3ph
1.Supv. ph.seq.I.Failure [BOOL]
Unit
Additional tasks
Run sequence
Operand
Power system.Meas.point I-3ph
1.Supv. sum I.Failure [BOOL]
Unit
Additional tasks
Run sequence
Operand
Power system.Meas.point I-3ph
2.Supv. balan. I.Failure [BOOL]
Unit
Additional tasks
Run sequence
Operand
Power system.Meas.point I-3ph
2.Supv. ph.seq.I.Failure [BOOL]
Unit
Additional tasks
Run sequence
Operand
Power system.Meas.point I-3ph
2.Supv. sum I.Failure [BOOL]
Unit
Additional tasks
Run sequence
Operand
Power system.Meas.point I-3ph
2.Supv.ADC sum I.Failure [BOOL]
Unit
Additional tasks
Run sequence
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
0
OR10
Type
Task
Comment
Object/parameter
Bool
Type
Task
Comment
Object/parameter
Bool
Type
Task
Comment
Bool
X8
X9
X9
X10
X10
Totally Integrated
Automation Portal
/
Run sequence
Object/parameter
Y
Type
Task
Comment
Object/parameter
Bool
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
.../build_sps_1.VAL
Type
Task
Comment
Run sequence
2
Object/parameter
Operand
Unit
Additional tasks
Run sequence
or10_2
Type
Task
Comment
Object/parameter
OR10
default
OR
X1
Operand
Unit
Additional tasks
Run sequence
0
Type
Task
Comment
Object/parameter
Bool
Operand
Power system.Meas.point V-3ph
1.Supv. balan. V.Failure [BOOL]
Type
Bool
Task
Comment
Object/parameter
X2
X3
Type
Bool
Task
Comment
Object/parameter
X3
X4
Type
Bool
Task
Comment
Object/parameter
X4
X5
Type
Bool
Task
Comment
X5
Object/parameter
Y
Type
Task
Comment
Object/parameter
Bool
Unit
Additional tasks
Run sequence
Operand
Power system.Meas.point V-3ph
1.Supv. ph.seq.V.Failure [BOOL]
Unit
Additional tasks
Run sequence
Operand
Power system.Meas.point V-3ph
1.Supv. sum V.Failure [BOOL]
Unit
Additional tasks
Run sequence
Operand
Power system.Meas.point V-3ph 1.VT
miniatureCB.>Open [BOOL]
Unit
Additional tasks
Y
OR10
X1
X2
/
Run sequence
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
.../build_sps_2.VAL
Type
Task
Comment
Run sequence
3
Object/parameter
Operand
Unit
Additional tasks
Run sequence
or10_3
Type
Task
Comment
Object/parameter
Y
OR10
OR10
default
OR
X1
Totally Integrated
Automation Portal
Operand
Unit
Additional tasks
Run sequence
General.Health.warning [BOOL]
Operand
Unit
Additional tasks
General.Health.alarm [BOOL]
Type
Task
Comment
Object/parameter
Bool
Type
Task
Comment
Bool
Object/parameter
Y
Type
Task
Comment
Object/parameter
Bool
X1
X2
X2
/
Run sequence
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
.../build_sps_3.VAL
Type
Task
Comment
Run sequence
4
Object/parameter
Operand
Unit
Additional tasks
Run sequence
build_q_1
Type
Task
Comment
Object/parameter
BUILD_Q
default
BUILD_Q
GOOD
Operand
Unit
Additional tasks
Run sequence
1
Type
Task
Comment
Object/parameter
Bool
Operand
Unit
Additional tasks
0
Type
Task
Comment
Bool
Object/parameter
QL
Type
Task
Comment
Object/parameter
Struct
Y
BUILD_Q
GOOD
BAD
DISTURBED
/
Run sequence
Operand
Unit
Additional tasks
Run sequence
16#0000
Operand
Unit
Additional tasks
.../build_sps_1.QL
Type
Task
Comment
Run sequence
5
Object/parameter
Operand
Unit
Additional tasks
Run sequence
build_sps_1
Type
Task
Comment
Object/parameter
BUILD_SPS
default
BUILD_SPS
VAL
Operand
Unit
Additional tasks
Run sequence
.../or10_1.Y
Type
Task
Comment
Object/parameter
Bool
Operand
Unit
Additional tasks
.../build_q_1.QL
Type
Task
Comment
Struct
/
QL
BUILD_SPS
VAL
QL
QL
Totally Integrated
Automation Portal
Run sequence
Object/parameter
OUT
Type
Task
Comment
Object/parameter
Struct
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
.../or_sps_1.IN1
Type
Task
Comment
Run sequence
6
Object/parameter
Operand
Unit
Additional tasks
Run sequence
build_q_2
Type
Task
Comment
Object/parameter
BUILD_Q
default
BUILD_Q
GOOD
Operand
Unit
Additional tasks
Run sequence
1
Type
Task
Comment
Object/parameter
Bool
Operand
Unit
Additional tasks
0
Type
Task
Comment
Bool
Object/parameter
QL
Type
Task
Comment
Object/parameter
Struct
OUT
BUILD_Q
GOOD
BAD
DISTURBED
/
Run sequence
Operand
Unit
Additional tasks
Run sequence
16#0000
Operand
Unit
Additional tasks
.../build_sps_2.QL
Type
Task
Comment
Run sequence
7
Object/parameter
Operand
Unit
Additional tasks
Run sequence
build_sps_2
Type
Task
Comment
Object/parameter
BUILD_SPS
default
BUILD_SPS
VAL
Operand
Unit
Additional tasks
Run sequence
.../or10_2.Y
Type
Task
Comment
Object/parameter
Bool
Operand
Unit
Additional tasks
.../build_q_2.QL
Type
Task
Comment
Struct
Object/parameter
OUT
Type
Task
Comment
Object/parameter
Struct
QL
BUILD_SPS
VAL
QL
QL
/
Run sequence
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
.../or_sps_1.IN2
Type
Task
Comment
OUT
Totally Integrated
Automation Portal
Run sequence
8
Object/parameter
Operand
Unit
Additional tasks
Run sequence
build_q_3
Type
Task
Comment
Object/parameter
BUILD_Q
default
BUILD_Q
GOOD
Operand
Unit
Additional tasks
Run sequence
1
Type
Task
Comment
Object/parameter
Bool
Operand
Unit
Additional tasks
0
Type
Task
Comment
Bool
Object/parameter
QL
Type
Task
Comment
Object/parameter
Struct
BUILD_Q
GOOD
BAD
DISTURBED
/
Run sequence
Operand
Unit
Additional tasks
Run sequence
16#0000
Operand
Unit
Additional tasks
.../build_sps_3.QL
Type
Task
Comment
Run sequence
9
Object/parameter
Operand
Unit
Additional tasks
Run sequence
build_sps_3
Type
Task
Comment
Object/parameter
BUILD_SPS
default
BUILD_SPS
VAL
Operand
Unit
Additional tasks
Run sequence
.../or10_3.Y
Type
Task
Comment
Object/parameter
Bool
Operand
Unit
Additional tasks
.../build_q_3.QL
Type
Task
Comment
Struct
Object/parameter
OUT
Type
Task
Comment
Object/parameter
Struct
QL
BUILD_SPS
VAL
QL
QL
/
Run sequence
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
.../or_sps_1.IN3
Type
Task
Comment
Run sequence
10
Object/parameter
Operand
Unit
Additional tasks
Run sequence
or_sps_1
Type
Task
Comment
Object/parameter
OR_SPS
default
OR_SPS
IN1
Operand
Unit
.../build_sps_1.OUT
Type
Task
Struct
OUT
OR_SPS
Totally Integrated
Automation Portal
Additional tasks
Run sequence
Operand
Unit
Additional tasks
Run sequence
.../build_sps_2.OUT
Operand
Unit
Additional tasks
Run sequence
.../build_sps_3.OUT
Operand
Unit
Additional tasks
0
Comment
Object/parameter
X1
IN2
Type
Task
Comment
Object/parameter
Struct
Type
Task
Comment
Object/parameter
Struct
Type
Task
Comment
Struct
Object/parameter
OUT
Type
Task
Comment
Object/parameter
Struct
X2
IN3
X3
IN4
X4
/
Run sequence
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
Run sequence
Alarm handling.>Group Warning [SPS] Type
Task
Comment
Object/parameter
Operand
Unit
Additional tasks
0
Type
Task
Comment
OUT
VALID
Bool
VALID
Totally Integrated
Automation Portal
7UT86
Process mode inactive
Totally Integrated
Automation Portal
1.2 ( Page12 - 3)
Process mode inactive - Data flow /Task: Event-triggered - Partition_1 (1.1 / 3.2)
2.1 ( Page12 - 4)
Totally Integrated
Automation Portal
1.1 ( Page12 - 2)
Process mode inactive - Data flow /Task: Event-triggered - Partition_1 (1.2 / 3.2)
2.2 ( Page12 - 5)
Totally Integrated
Automation Portal
Process mode inactive - Data flow /Task: Event-triggered - Partition_1 (2.1 / 3.2)
2.2 ( Page12 - 5)
1.1 ( Page12 - 2)
3.1 ( Page12 - 6)
Totally Integrated
Automation Portal
Process mode inactive - Data flow /Task: Event-triggered - Partition_1 (2.2 / 3.2)
2.1 ( Page12 - 4)
1.2 ( Page12 - 3)
3.2 ( Page12 - 7)
Totally Integrated
Automation Portal
Process mode inactive - Data flow /Task: Event-triggered - Partition_1 (3.1 / 3.2)
3.2 ( Page12 - 7)
2.1 ( Page12 - 4)
Totally Integrated
Automation Portal
Process mode inactive - Data flow /Task: Event-triggered - Partition_1 (3.2 / 3.2)
3.1 ( Page12 - 6)
2.2 ( Page12 - 5)
Totally Integrated
Automation Portal
Totally Integrated
Automation Portal
Process mode inactive - Control flow /Task: Event-triggered
Run sequence
1
Object/parameter
Operand
Unit
Additional tasks
Run sequence
or10_1
Type
Task
Comment
Object/parameter
Operand
Unit
Additional tasks
Run sequence
Device.Simulation mode active [BOOL] Type
Task
Comment
Object/parameter
Bool
Operand
Unit
Additional tasks
Device.Commiss. mode active [BOOL] Type
Task
Comment
Bool
OR10
OR10
default
OR
X1
X1
X2
X2
/
Run sequence
Object/parameter
Y
Type
Task
Comment
Object/parameter
Bool
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
Run sequence
.../and10_1.X1
Type
Task
Comment
Object/parameter
Operand
Unit
Additional tasks
Device.Process mode inactive [BOOL]
Type
Task
Comment
Run sequence
2
Object/parameter
Operand
Unit
Additional tasks
Run sequence
neg_1
Type
Task
Comment
Object/parameter
NEG
default
NEG
IN
Operand
Unit
Additional tasks
Device.DIGSI active [BOOL]
Type
Task
Comment
Bool
Object/parameter
OUT
Type
Task
Comment
Object/parameter
Bool
Y
NEG
IN
/
Run sequence
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
.../and10_1.X2
Type
Task
Comment
Run sequence
3
Object/parameter
Operand
Unit
Additional tasks
Run sequence
and10_1
Type
Task
Comment
Object/parameter
OUT
AND10
AND10
default
AND
X1
Totally Integrated
Automation Portal
Operand
Unit
Additional tasks
Run sequence
.../or10_1.Y
Operand
Unit
Additional tasks
.../neg_1.OUT
Type
Task
Comment
Object/parameter
Bool
Type
Task
Comment
Bool
Object/parameter
Y
Type
Task
Comment
Object/parameter
Bool
X1
X2
X2
/
Run sequence
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
Run sequence
.../neg_2.IN
Type
Task
Comment
Object/parameter
Operand
Unit
Additional tasks
.../tlong_1.START
Type
Task
Comment
Run sequence
4
Object/parameter
Operand
Unit
Additional tasks
Run sequence
neg_2
Type
Task
Comment
Object/parameter
NEG
default
NEG
IN
Operand
Unit
Additional tasks
.../and10_1.Y
Type
Task
Comment
Bool
Object/parameter
OUT
Type
Task
Comment
Object/parameter
Bool
Y
NEG
IN
/
Run sequence
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
.../tlong_1.RESET
Type
Task
Comment
Run sequence
5
Object/parameter
Operand
Unit
Additional tasks
Run sequence
tlong_1
Type
Task
Comment
Object/parameter
TLONG
default
TLONG
START
Operand
Unit
Additional tasks
Run sequence
.../and10_1.Y
Type
Task
Comment
Object/parameter
Bool
Operand
Unit
Additional tasks
Run sequence
.../neg_2.OUT
Type
Task
Comment
Object/parameter
Bool
OUT
TLONG
START
RESET
RESET
HOUR
Totally Integrated
Automation Portal
Operand
Unit
Additional tasks
Run sequence
4
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
10
100ms
Type
Task
Comment
Object/parameter
UInt (0..65534)
Type
Task
Comment
Object/parameter
UInt (0..59)
Type
Task
Comment
UInt (0..599)
Object/parameter
Q
Type
Task
Comment
Object/parameter
Bool
HOUR
MIN
MIN
MS100
MS100
/
Run sequence
Operand
Unit
Additional tasks
Run sequence
0
Operand
Unit
Additional tasks
Run sequence
Alarm handling.>Group Alarm [BOOL] Type
Task
Comment
Object/parameter
Operand
Unit
Additional tasks
0
Type
Task
Comment
Q
QT
Bool
QT
Totally Integrated
Automation Portal
7UT86
DIS_Z4_trip_all_CB
Totally Integrated
Automation Portal
1.2 ( Page13 - 3)
DIS_Z4_trip_all_CB - Data flow /Task: Event-triggered - Partition_1 (1.1 / 3.2)
2.1 ( Page13 - 4)
Totally Integrated
Automation Portal
1.1 ( Page13 - 2)
DIS_Z4_trip_all_CB - Data flow /Task: Event-triggered - Partition_1 (1.2 / 3.2)
2.2 ( Page13 - 5)
Totally Integrated
Automation Portal
DIS_Z4_trip_all_CB - Data flow /Task: Event-triggered - Partition_1 (2.1 / 3.2)
2.2 ( Page13 - 5)
1.1 ( Page13 - 2)
3.1 ( Page13 - 6)
Totally Integrated
Automation Portal
DIS_Z4_trip_all_CB - Data flow /Task: Event-triggered - Partition_1 (2.2 / 3.2)
2.1 ( Page13 - 4)
1.2 ( Page13 - 3)
3.2 ( Page13 - 7)
Totally Integrated
Automation Portal
DIS_Z4_trip_all_CB - Data flow /Task: Event-triggered - Partition_1 (3.1 / 3.2)
3.2 ( Page13 - 7)
2.1 ( Page13 - 4)
Totally Integrated
Automation Portal
DIS_Z4_trip_all_CB - Data flow /Task: Event-triggered - Partition_1 (3.2 / 3.2)
3.1 ( Page13 - 6)
2.2 ( Page13 - 5)
Totally Integrated
Automation Portal
Totally Integrated
Automation Portal
DIS_Z4_trip_all_CB - Control flow /Task: Event-triggered
Run sequence
1
Object/parameter
Operand
Unit
Additional tasks
Run sequence
and10_1
Type
Task
Comment
Object/parameter
AND10
default
AND
X1
Operand
Unit
Additional tasks
Run sequence
0
Type
Task
Comment
Object/parameter
Bool
Operand
Unit
Additional tasks
Run sequence
1
Type
Task
Comment
Object/parameter
Bool
Operand
Unit
Additional tasks
0
Type
Task
Comment
Bool
AND10
X1
X2
X2
Y
Y
Totally Integrated
Automation Portal
7UT86 / Display pages
Fault-display configuration
Circuit breaker 1
Display line
Display line 1
Display line 2
Display line 3
Display line 4
Display line 5
Display line 6
Displayed information
Pickup indication
PU time
Operate indication
Trip time
No alarm
No alarm
Totally Integrated
Automation Portal
7UT86
Safety and security
Operations safety and access control
Enter confirmation ID
Scope of operation
Settings
Active
true
Fct.Key/PB operation
false
Switching
Switch./interl.check
true
true
Switch./switch.auth.
true
Banner setting
Number
1331.23941.101
Settings
Enable banner
Value
All: false
Sec. Ev. Logg. \General
Number
1331.2761.19021.120
Settings
Security log cap. warn.
Value
All: 80 %
Sec. Ev. Logg. \syslog server A
Number
1331.2761.19021.101
Settings
Enable logging
Value
All: false
Sec. Ev. Logg. \syslog server B
Number
1331.2761.19021.111
Settings
Enable logging
Value
All: false
DIGSI access
Number
1331.19831.101
1331.19831.102
1331.19831.106
Settings
Integrated Port J
Module Port E
Integrated USB port
Value
All: read and write access
All: read and write access
All: read and write access
Web access
Number
1331.20431.101
Settings
Integrated Port J
Value
All: read and write access
Description
Allows changing the settings and device
mode, loading the firmware, setting the
counters, deleting logs.
Allows operating via function keys and
push-buttons only with entering the con‐
firmation ID for "Setting".
Allows switching operations
Allow switching operations. Interlocking
checks can be switched on and off.
Allows switching operations. The switch‐
ing authority can be changed.
Security event logging
Network access security
Totally Integrated
Automation Portal
Number
1331.20431.102
1331.20431.106
Settings
Module Port E
Integrated USB port
Value
All: read and write access
All: read and write access
Client Auth
Number
1331.21001.102
Settings
Trusted CA
Value
All: SIPROTEC 5 trusted certificate author‐
ity
IEEE 802.1X
Number
1331.20881.106
Settings
Module Port E
Value
All: Disabled
Automatic certificate management
EST server
Number
1331.20911.101
Settings
Enable EST server
Value
All: false
Auto.enroll
Number
1331.23671.201
1331.23671.202
Settings
DIGSI
Web UI
Value
All: false
All: false