Uploaded by pirkejezus

ISO Standards Oil&Gas Issued 2016

advertisement
ISO Standards for use in the oil & gas industry
ISO 10418
ISO 10419
ISO 10423
ISO 12489
ISO 13354
ISO 13533
ISO 13534
ISO 13535
ISO 13626
ISO 13702
ISO 13703
ISO 14224
ISO 14692
ISO 14693
Basic surface process safety systems (Rev)
Replaced by API Spec 6AV2
Wellhead & christmas tree equipment
Reliability modelling/safety systems
Shallow gas diverter equipment
Drill-through equipment (BOPs)
Hoisting equipment – care/maintenance
Hoisting equipment – specification
Drilling and well-servicing structures
Control and mitigation of fires and explosions (Rev)
Offshore piping systems
Reliability and maintenance data for equipment (Rev)
GRP piping, Parts 1-4 (Rev)
Drilling equipment
ISO 13624
ISO 13625
ISO 19901-7
ISO 19904-1
ISO 19905-3
ISO 15138
ISO 15156
ISO 15544
ISO 15663
ISO 16901
ISO 16903
ISO 16904
ISO 17177
ISO 17292
ISO 17776
ISO 17781
ISO 17782
ISO 17945
ISO 17969
ISO 18683
ISO 19008
ISO 20815
ISO 21457
ISO 23936-1
ISO 23936-2
ISO 27469
ISO 29001
HVAC
Cracking-resistant materials for use in H2S environments, Parts 1-3 (Rev)
Emergency response
Life cycle costing, Parts 1–3
Risk assessment in the design of onshore LNG installations (New)
Characteristics of LNG influencing design and material selection (New)
LNG marine transfer arms (New)
Unconventional LNG transfer systems (New)
Metal ball valves (Rev)
Hazard identification and risk assessment (Rev)
Duplex stainless steel materials testing requirements (New)
Qualification of manufacturers of special materials (New)
Materials resistant to sulfide stress cracking (New)
Guidelines on competency for personnel (New)
Systems and installations for supply of LNG as fuel to ships (New)
Standard cost coding system (New)
Production assurance and reliability management
Materials selection
Thermoplastics
Elastomers
Method of test for offshore fire dampers
Sector-specific quality management systems
ISO 18797-1
ISO 19900
ISO 19901-1
ISO 19901-2
ISO 19901-3
ISO 19901-4
ISO 19901-5
ISO 19901-6
ISO 19901-8
ISO 19902
ISO 19903
ISO 19905-1
ISO 19905-2
ISO 19906
Marine drilling riser systems, Parts 1-2
Marine drilling riser couplings
Stationkeeping systems (Rev)
Monohulls, semi-submersibles and spars (Rev)
Site-specific assessment of mobile units (New)
Elastomeric coating systems of risers (New)
General requirements for offshore structures
Metocean design and operating considerations (Rev)
Seismic design procedures (Rev)
Topsides structure
Geotechnical and foundation design (Rev)
Weight control (Rev)
Marine operations
Marine soil investigations
Fixed steel offshore structures (Rev)
Fixed concrete offshore structures
Site-specific assessment jack-ups (Rev)
Jack-ups commentary
Arctic offshore structures
ISO 3977-5
ISO 10428
ISO 10431
ISO 10434
ISO 10436
ISO 10437
ISO 10438
ISO 10439
ISO 10440-1
ISO 10440-2
ISO 10441
ISO 10442
ISO 12211
ISO 12212
ISO 13631
ISO 13691
ISO 13704
ISO 13705
ISO 13706
ISO 13707
ISO 13709
ISO 13710
ISO 14691
ISO 15547
ISO 15649
Gas turbines – procurement
Sucker rods
Pumping unites
Bolted bonnet steel gate valves
Replaced by API Std 611
Special-purpose steam turbines
Lubrication, shaft-sealing and control-oil systems, Parts 1–4
Centrifugal compressors
Rotary-type positive-displacement process compressors (oil-free)
Rotary PD packaged air compressors
Flexible couplings – special
Integrally geared air compressors
Spiral plate heat exchangers
Hairpin heat exchangers
Reciprocating gas compressors
High speed enclosed gear units
Calculation of heater tube thickness
Fired heaters for general service
Air-cooled heat exchangers
Reciprocating compressors
Centrifugal pumps
Reciprocating positive displacement pumps
Flexible couplings – general
Heat exchangers, Parts 1-2
Piping
ISO 3183
ISO 12490
ISO 13628-1
ISO 13628-2
ISO 13628-3
ISO 13628-4
ISO 13628-5
ISO 13628-6
ISO 13628-7
Subsea production systems
Subsea flexible pipe systems
Subsea TFL pumpdown systems
Subsea wellhead and tree equipment
Subsea control umbilicals
Subsea production controls
Completion/workover riser system
ISO 10400
ISO 10405
ISO 10407-1
ISO 10407-2
ISO 10414-1
ISO 10414-2
ISO 10416
ISO 10417
ISO 10422
ISO 10424-1
ISO 10424-2
Calculations for OCTG performance properties
Care/use of casing/tubing
Drill stem design
Inspection and classification of drill stem elements
Field testing of water-based fluids
Field testing of oil-based drilling fluids
Drilling fluids – lab testing
Subsurface safety valve systems
Replaced by API Spec 5B
Rotary drill stem elements
Threading and gauging of connections
ISO 12736
ISO 12747
ISO 13623
ISO 13847
ISO 14313
ISO 14723
ISO 15589-1
ISO 15589-2
ISO 15590-1
ISO 15590-2
ISO 15590-3
ISO 13628-8
ISO 13628-9
ISO 13628-10
ISO 13628-11
ROT and interfaces
ROT intervention systems
Bonded flexible pipe
Flexible pipe systems for subsea and
marine applications
ISO 13628-15 Subsea structures and manifolds
ISO 10426-1
ISO 10426-2
ISO 10426-3
ISO 10426-4
ISO 10426-5
ISO 10426-6
ISO 10427-1
ISO 10427-2
ISO 10427-3
ISO 10432
ISO 10433
Well cementing
Testing of well cements
Testing of deepwater well cement
Atmospheric foamed cement slurries
Shrinkage and expansion of well cement
Static gel strength of cement formulations
Bow spring casing centralizers
Centralizer placement and stop-collar testing
Performance testing of cement float equipment
Subsurface safety valves
Replaced by API Spec 6AV1
ISO 11960
ISO 11961
ISO 12835
ISO 13085
ISO 13500
ISO 13501
ISO 13503-1
ISO 13503-2
ISO 13503-3
ISO 13503-4
ISO 13503-5
ISO 13503-6
ISO 13678
ISO 13679
ISO 13680
ISO 14310
Casing and tubing for wells
Drill pipe
Qualification of casing connections for thermal wells
Tubing aluminium alloy pipes
Drilling fluids
Drilling fluids – processing systems evaluation
Measurement of viscous properties of completion fluids
Measurement of properties of proppants
Testing of heavy brines
Measurement of stimulation & gravelpack fluid leakoff
Measurement of long term conductivity of proppants
Measuring leak-off of completion fluids under dynamic
conditions
Thread compounds
Casing and tubing connections testing
CRA seamless tubes for casing & tubing
Packers and bridge plugs
ISO 14998
ISO 15136
ISO 15463
ISO 15464
ISO 15551-1
ISO 15546
ISO 16070
ISO 16530-1
ISO 16530-2
ISO 17078-1
ISO 17078-2
ISO 17078-3
ISO 17078-4
ISO 17824
ISO 20312
ISO 27627
ISO 28781
Steel pipe for pipeline transportation systems
Actuation, mechanical integrity and sizing for
pipeline valves
Wet thermal insulation coatings
Pipeline life extension
Pipeline transportation systems
Welding of pipelines
Pipeline valves
Subsea pipeline valves
Cathodic protection of on-land pipelines (Rev)
Cathodic protection for offshore pipelines
Pipeline induction bends
Pipeline fittings
Pipeline flanges
Accessory completion equipment
Progressing cavity pump systems, Parts 1-2
Field inspection of new casing, tubing and plain end drill pipe
Gauging and inspection of threads
Electric submersible pump systems for artificial lift (New)
Aluminium alloy drill pipe
Lock mandrels and landing nipples
Well integrity life cycle governance (New)
Well integrity operational phase
Side-pocket mandrels
Flow control devices for side-pocket mandrels
Latches & seals for side-pocket mandrels & flow control devices
Side-pocket mandrels and related equipment
Sand control screens
Design of aluminium drill string
Aluminium alloy drill pipe thread gauging
Subsurface tubing mounted formation barriers
ISO 15761
ISO 16812
ISO 16901
ISO 16961
ISO 17177
ISO 17292
ISO 17348
Steel valves DN 100 and smaller
Shell & tube heat exchangers
Risk assessment of onshore LNG installations
Internal coating and lining of steel storage tanks (New)
Unconventional LNG transfer systems
Metal ball valves
Materials Selection in CO2 environment for seamless
tubes and fittings (New)
ISO 17349
High levels of CO2 at HP and high flow rates (New)
ISO 18624-1 Design and testing of LNG storage tanks (New)
ISO 21049
Centrifugal and rotary pumps shaft sealing
ISO 23251
Replaced by API Std 521
ISO 24817
Composite repairs for pipework (New)
ISO 25457
Flares details
ISO 27509
Compact flanged connections
ISO 28300
Venting of storage tanks
ISO 28460
LNG – Ship to shore interface
ISO 16440
Steel cased pipelines (New)
ISO 16708
Pipeline reliability-based limit state design
ISO 19345-1 Life cycle integrity management for onshore
pipeline (New)
ISO 21329
Test procedures for pipeline mechanical connectors
ISO 21809-1 Polyolefin coatings (3-layer PE and 3-layer PP)
ISO 21809-2 Fusion-bonded epoxy coatings
ISO 21809-3 Field joint coatings for buried or submerged
pipelines (Rev)
ISO 21809-4 Polyethylene coatings (2-layer PE)
ISO 21809-5 External concrete coatings
Standards in purple issued in 2015
Standards in blue are a priority for 2016 issue
These ISO standards, TR and TS (abbreviated titles) are only a core collection of
several hundreds of standards available for the oil & gas industry from ABNT,
ANSI, API, AS, BSI, CSA, NORSOK, NF, GOST, SAC etc. Some ISO/TC67 standards
have been withdrawn and the relevant API standard is referenced above
Download