2010 Antenna Catalog
Rev.1.0
BASE STATION ANTENNA
for Wireless Telecommunication
The Catalog contains KMW’s Fixed Antenna and Advanced Adjustable Antenna Solutions.
- Fixed Antenna
- EDTA (Electrical Downtilt Antenna)
- DualPhase™ Antenna (Hybrid 2way Antenna)
- Triphase™ Antenna (Hybrid 3way Antenna)
1. DualPhase™ Antenna
- Patented Antenna providing Electrical Downtilt Antenna & Mechanical Steering function in a Single Radome.
- Fully complies with AISG standard.
[ Adjustable Steering ]
- Azimuth-
[ Adjustable Downtilt ]
-Vertical-
Key Benefits of Adjustable Steering Function
Maximum Efficiency for Network Optimization
- No Need to Climb Tower for Optimization
- Optimization Cost & Time Reduction
 Coverage Improvement, Reduce Cell Overlap, C/I Improvement
 Capacity Increase with Inter-Sector Traffic Load Balancing by Adjustable Steering Function
 Increase Sector Utilization
 Real time & Dynamic Network Optimization
2. Solution Antenna
KMW is global leader for supplying Advanced Solution Antenna.
- LNA+ : Distributed TMA Integrated Antenna
- EyeOntenna : Imbedded Network Camera Module into Antenna
3. All KMW Antenna Products including Antenna Line Device fully complies the AISG standard.
- RET Solutions (Remote Electrical Tilt Solution)
- CBT Solutions (Conversion Bias-Tee ; Layer One Converter defined at AISG)
- AISG Compatible TMA (Tower Mounted Amplifier)
- Remote Control Solutions, Portable Controller, Master Controller,
- CAMS(Central Antenna Management System)
KMW provides friendly site-installation Antenna Line Devices.
(For more details, please refer to Antenna Line Device Catalog)
3
All Solution and Products are compliant to AISG1.1 and 3GPP/AISG2.0
RET Solutions
• Field Attachable Knob RET
• Attachable to Knob Antenna when RET required
• iRET (Internal RET)
• Antenna Imbedded RET
• Field replaceable when required (Quick & Simple)
• iCBT (Internal RET & CBT)
• Antenna Imbedded RET & CBT(CBT, Conversion Bias-Tee)
• Not required of separate CBT
• Easy site installation (Antenna Install only and RF port connection)
Remote Antenna Control Solutions
• PAC-A
• Portable Antenna Controller
• Master Control Unit
• Compliant to AISG 1.1 and 3GPP/AISG 2.0
Tower Mounted Amplifier (TMA)Solutions
• AISG Compatible TMA
• Layer-One Converter imbedded
Conversion Bias-Tee
• Layer-One converter defined at AISG standard
• Convert RS485 to 2.176MHz OOK signal (or vise versa)
AISG Jumper Cables
• Full line up of AISG Jumper cables
• Supported by customer requirement.
4
Antenna
Fixed Antenna
Single Band
Frequency
Polarization
790~960
X-pol.
8~13
XX-pol.
14~15
824~896
X-pol.
16~17
820~960
X-pol.
18~23
860~960
X-pol.
24~26
1710~2170
X-pol.
27~43
XX-pol.
44~48
X-pol.
49~52
2300~2700
XX-pol.
53
X-pol.
54
XX-pol.
55
XX-pol.
56~61
698~894
X-pol.
63~68
790~960
X-pol.
69~74
XX-pol.
75~77
1427~1486
X-pol.
78~79
1710~2170
X-pol.
80~87
XX-pol.
88~90
X-pol.
91~92
3300~3800
Dual Band
EDTA
Single Band
2300~2690
DualPhase
Page
XX-pol.
93
Dual Band
XX-pol.
95~98
Triple Band
XXX-pol.
100~103
790~960
X-pol.
105~106
1710~2170
X-pol.
107~112
XX-pol.
113~114
2300~2690
X-pol.
115~116
1710~2170
X-pol.
118
Single Band
TriPhase
Single Band
Solution Antenna
Distributed TMA integrated Antenna
120~122
EyeOntenna
5
Fi xed A ntenna
Product List
Model No.
Frequency
Pol.
HPBW
(degree)
Gain
(dBi)
Tilt
(degree)
F
ix
e
d
A
n
te
n
n
a
Page
FX-X-GW-65-15-00T
790~960
X-pol.
65
15
0
8
FX-X-GW-65-16-00T
790~960
X-pol.
65
16
0
9
FX-X-GW-65-17-00T
790~960
X-pol.
65
17
0
10
FX-X-GW-85-14-00T
790~960
X-pol.
85
14
0
11
FX-X-GW-85-15-00T
790~960
X-pol.
85
15
0
12
FX-X-GW-85-16-00T
790~960
X-pol.
85
16
0
13
FX-Q-GW-65-15-00T
790~960
XX-pol.
65
15
0
14
FX-Q-GW-65-16-00T
790~960
XX-pol.
65
16
0
15
FX-X-CB-18-65-00T
824~896
X-pol.
65
18
0
16
FX-X-CB-18-65-03T
824~896
X-pol.
65
18
3
17
FX-X-CG-15-65-03T
820~960
X-pol.
65
15
3
18
FX-X-CG-15-65-06T
820~960
X-pol.
65
15
6
19
FX-X-CG-17-65-00T
820~960
X-pol.
65
17
0
20
FX-X-CG-17-65-03T
820~960
X-pol.
65
17
3
21
FX-X-CG-17-65-06T
820~960
X-pol.
65
17
6
22
FX-X-CG-18-65-06T
820~960
X-pol.
65
18
6
23
FX-X-GB-18-65-00T
860~960
X-pol.
65
18
0
24
FX-X-GB-18-65-03T
860~960
X-pol.
65
18
3
25
FX-X-GB-18-65-09T
860~960
X-pol.
65
18
9
26
FX-X-HB-33-20-00T
1710~2170
X-pol.
33
20
0
27
FX-X-HB-33-21-00T
1710~2170
X-pol.
33
21
0
28
FX-X-HB-45-19-00T
1710~2170
X-pol.
45
19
0
29
FX-X-HB-45-20-00T
1710~2170
X-pol.
45
20
0
30
FX-X-ID-15-65-00T
1710~2170
X-pol.
65
15
0
31
FX-X-ID-15-65-03T
1710~2170
X-pol.
65
15
3
32
FX-X-ID-15-65-06T
1710~2170
X-pol.
65
15
6
33
FX-X-ID-15-65-09T
1710~2170
X-pol.
65
15
9
34
FX-X-ID-17-65-00T
1710~2170
X-pol.
65
17
0
35
FX-X-ID-17-65-03T
1710~2170
X-pol.
65
17
3
36
FX-X-ID-18-65-00T
1710~2170
X-pol.
65
18
0
37
FX-X-ID-18-65-02T
1710~2170
X-pol.
65
18
2
38
6
Fi xed A ntenna
Product List
Model No.
Frequency
Pol.
HPBW
(degree)
Gain
(dBi)
Tilt
(degree)
FX-X-ID-18-65-06T
1710~2170
X-pol.
65
18
6
39
FX-X-ID-18-65-09T
1710~2170
X-pol.
65
18
9
40
FX-X-HB-65-19-00T
1710~2170
X-pol.
65
19
0
41
FX-X-HB-90-17-00T
1710~2170
X-pol.
90
17
0
42
FX-X-HB-90-18-00T
1710~2170
X-pol.
90
18
0
43
2FX-X-ID-15-65-03T
1710~2170
XX-pol.
65
15
3
44
2FX-X-ID-15-65-06T
1710~2170
XX-pol.
65
15
6
45
2FX-X-ID-17-65-00T
1710~2170
XX-pol.
65
15
0
46
FX-Q-HB-65-18-00T
1710~2170
XX-pol.
65
18
0
47
FX-Q-HB-65-19-00T
1710~2170
XX-pol.
65
19
0
48
FX-X-WL-33-19-00T
2300~2690
X-pol.
33
19
0
49
FX-X-WL-65-15-00T
2300~2690
X-pol.
65
15
0
50
FX-X-WL-65-18-00T
2300~2690
X-pol.
65
18
0
51
FX-X-WM-17-65-00T
2300~2690
X-pol.
65
17
0
52
2FX-X-WM-17-65-00T
2300~2690
XX-pol.
65
17
0
53
FX-X-W3-65-17-00T
3300~3800
X-pol.
65
17
0
54
FX-Q-W3-65-17-00T
3300~3800
XX-pol.
65
17
0
55
698~894 /
XX-pol.
65/65
15/17
0
56
XX-pol.
65/65
16/18
0
57
XX-pol.
65/65
15/17
0
58
XX-pol.
65/65
17/18
0
59
XX-pol.
65
12/14
0
60
XX-pol.
65
15/17
6
61
FX-X-CH-65-15-65-17-00T
F
ix
e
d
A
n
te
n
n
a
Page
1710~2170
FX-X-CH-65-16-65-18-00T
698~894 /
1710~2170
FX-X-GH-65-15-65-17-00T
790~960 /
1710~2170
FX-X-GH-65-17-65-18-00T
790~960 /
1710~2170
FX-X-BB-12/14-65-00T
820~960/
1710~2170
FX-X-CDG-15/17-65-06T
820~960/
1710~1880
7
Fixed Antenna
790~960MHz, X-pol., H65˚ / V15˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-GW-65-15-00T
Frequency Range
790~960MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
15.5˚
14.5 / 12.4
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1290mm x 270mm x 130mm (50.8” x 10.6” x 5.1”)
8.5kg (18.7lbs)
60m/s (135mph)
534.6N / 257.4N / 534.6N (120.2lbf / 57.9lbf / 120.2lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
8
Fixed Antenna
790~960MHz, X-pol., H65˚ / V9.5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-GW-65-16-00T
Frequency Range
790~960MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
9.5˚
Gain (dBi /dBd)
16.5 / 14.4
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
2020mm x 270mm x 130mm (79.5” x 10.6” x 5.1”)
Weight without Clamp
12.5kg (27.6lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
837.1N / 403.0N / 837.1N (188.3lbf / 90.6lbf / 188.3lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
9
Fixed Antenna
790~960MHz, X-pol., H65˚ / V7.3˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-GW-65-17-00T
Frequency Range
790~960MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.3˚
Gain (dBi /dBd)
17.5 / 15.4
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
2550mm x 270mm x 130mm (100.4” x 10.6” x 5.1”)
Weight without Clamp
16.0kg (35.3lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1056.7N / 508.8N / 1056.7N
(237.7lbf / 114.4lbf / 237.7lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
10
Fixed Antenna
790~960MHz, X-pol., H85˚ / V15˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-GW-85-14-00T
Frequency Range
790~960MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
85˚
15.5˚
13.5 / 11.4
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 23dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1290mm x 270mm x 130mm (50.8” x 10.6” x 5.1”)
8.5kg (18.7lbs)
60m/s (135mph)
534.6N / 257.4N / 534.6N (120.2lbf / 57.9lbf / 120.2lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
11
Fixed Antenna
790~960MHz, X-pol., H85˚ / V9.5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-GW-85-15-00T
Frequency Range
790~960MHz
3dB
Beam-Width
Horizontal
85˚
Vertical
9.5˚
Gain (dBi /dBd)
15.5 / 13.4
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 23dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
2020mm x 270mm x 130mm (79.5” x 10.6” x 5.1”)
Weight without Clamp
12.5kg (27.6lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
837.1N / 403.0N / 837.1N (188.3lbf / 90.6lbf / 188.3lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
12
Fixed Antenna
790~960MHz, X-pol., H85˚ / V7.3˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-GW-85-16-00T
Frequency Range
790~960MHz
3dB
Beam-Width
Horizontal
85˚
Vertical
7.3˚
Gain (dBi /dBd)
16.5 / 14.4
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 23dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
2550mm x 270mm x 130mm (100.4” x 10.6” x 5.1”)
Weight without Clamp
16.0kg (35.3lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1056.7N / 508.8N / 1056.7N
(237.7lbf / 114.4lbf / 237.7lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
13
Fixed Antenna
790~960MHz, XX-pol., H65 ˚ / V15˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-Q-GW-65-15-00T
Frequency Range
790~960MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
15.5˚
14.5 / 12.4
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 8dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1290mm x 570mm x 130mm (50.8” x 22.4” x 5.1”)
16kg (35.3lbs)
60m/s (135mph)
1128.5N / 257.4N / 1128.5N
(258.3lbf / 57.9lbf / 258.3lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
14
Fixed Antenna
790~960MHz, XX-pol., H65˚ / V9.5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-Q-GW-65-16-00T
Frequency Range
790~960MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
9.5˚
Gain (dBi /dBd)
16.5 / 14.4
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 8dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
2020mm x 570mm x 130mm (79.5” x 22.4” x 5.1”)
25kg (55.1lbs)
60m/s (135mph)
1767.2N / 403.0N / 1767.2N
(379.4lbf / 90.6lbf / 379.4lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
15
Fixed Antenna
824~896MHz, X-pol., H65˚ / V7˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-CB-18-65-00T
Frequency Range
824~896MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.0˚
Gain (dBi /dBd)
17.5 / 15.4
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
300W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
2450mm x 270mm x 128mm (96.5” x 10.6” x 5.0”)
Weight without Clamp
16.5kg (36.3lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1016.0N / 481.6N / 1016.0N
(228.5lbf / 108.3lbf / 225.8lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
16
Fixed Antenna
824~896MHz, X-pol., H65˚ / V7˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-CB-18-65-03T
Frequency Range
824~896MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.0˚
Gain (dBi /dBd)
17.5 / 15.4
Fixed Electrical Down Tilt
3.0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
300W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
2450mm x 270mm x 128mm (96.5” x 10.6” x 5.0”)
Weight without Clamp
16.5kg (36.3lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1016.0N / 481.6N / 1016.0N
(228.5lbf / 108.3lbf / 225.8lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
17
Fixed Antenna
820~960MHz, X-pol., H65˚ / V14˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-CG-15-65-03T
Frequency Range
820~960MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
14.0˚
15.0 / 12.9
Fixed Electrical Down Tilt
3.0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
300W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1410mm x 270mm x 128mm (55.5” x 10.6” x 5.0”)
Weight without Clamp
10.5kg (23.1lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
584.2N / 277.0N / 584.2N (131.4lbf / 62.3lbf / 131.4lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
18
Fixed Antenna
820~960MHz, X-pol., H65˚ / V14˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-CG-15-65-06T
Frequency Range
820~960MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
14.0˚
15.0 / 12.9
Fixed Electrical Down Tilt
6.0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
300W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1410mm x 270mm x 128mm (55.5” x 10.6” x 5.0”)
Weight without Clamp
10.5kg (23.1lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
584.2N / 277.0N / 584.2N (131.4lbf / 62.3lbf / 131.4lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
19
Fixed Antenna
820~960MHz, X-pol., H65˚ / V10˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-CG-17-65-00T
Frequency Range
820~960MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
10.0˚
17.0 / 14.9
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
300W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1930mm x 270mm x 128mm (96.0” x 10.6” x 5.0”)
Weight without Clamp
13.0kg (28.6lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
800.0N / 379.1N / 800.0N (180.0lbf / 85.3lbf / 180.0lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
20
Fixed Antenna
820~960MHz, X-pol., H65˚ / V10˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-CG-17-65-03T
Frequency Range
820~960MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
10.0˚
16.5 / 14.4
Fixed Electrical Down Tilt
3.0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
300W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1930mm x 270mm x 128mm (96.0” x 10.6” x 5.0”)
Weight without Clamp
13.0kg (28.6lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
800.0N / 379.1N / 800.0N
(180.0lbf / 85.3lbf / 180.0lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
21
Fixed Antenna
820~960MHz, X-pol., H65˚ / V10˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-CG-17-65-06T
Frequency Range
820~960MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
10.0˚
16.5 / 14.4
Fixed Electrical Down Tilt
6.0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
300W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1930mm x 270mm x 128mm (96.0” x 10.6” x 5.0”)
Weight without Clamp
13.0kg (28.6lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
800.0N / 379.1N / 800.0N (180.0lbf / 85.3lbf / 180.0lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
22
Fixed Antenna
820~960MHz, X-pol., H65˚ / V7˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-CG-18-65-06T
Frequency Range
820~960MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.0˚
Gain (dBi /dBd)
17.5 / 15.4
Fixed Electrical Down Tilt
6.0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
300W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
2450mm x 270mm x 128mm (96.5” x 10.6” x 5.0”)
Weight without Clamp
16.5kg (36.3lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1015.1N / 481.2N / 1015.1N
(228.5lbf / 108.2lbf / 225.8lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
23
Fixed Antenna
860~960MHz, X-pol., H65˚ / V7˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-GB-18-65-00T
Frequency Range
860~960MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.0˚
Gain (dBi /dBd)
17.5 / 15.4
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 16dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
300W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
2450mm x 270mm x 128mm (96.5” x 10.6” x 5.0”)
Weight without Clamp
16.5kg (36.3lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1015.0N / 481.2N / 1015.1N
(228.5lbf / 108.2lbf / 225.8lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
24
Fixed Antenna
860~960MHz, X-pol., H65˚ / V7˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-GB-18-65-03T
Frequency Range
860~960MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.0˚
Gain (dBi /dBd)
17.5 / 15.4
Fixed Electrical Down Tilt
3.0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
300W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
2450mm x 270mm x 128mm (96.5” x 10.6” x 5.0”)
Weight without Clamp
16.5kg (36.3lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1004.7N / 476.3N / 1004.7N
(226.0lbf / 107.1lbf / 226.0lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
25
Fixed Antenna
860~960MHz, X-pol., H65˚ / V7˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-GB-18-65-09T
Frequency Range
860~960MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.0˚
Gain (dBi /dBd)
17.5 / 15.4
Fixed Electrical Down Tilt
9.0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
300W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
2450mm x 270mm x 128mm (96.5” x 10.6” x 5.0”)
Weight without Clamp
16.5kg (36.3lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1004.7N / 476.3N / 1004.7N
(226.0lbf / 107.1lbf / 226.0lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
26
Fixed Antenna
1710~2170MHz, X-pol., H33˚ / V7.5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-HB-33-20-00T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
33˚
Vertical
7.5˚
Gain (dBi /dBd)
19.8 / 17.7
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 30dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1219mm x 260mm x 90mm (48.0” x 10.2” x 3.5”)
9.0kg (19.9lbs)
60m/s (135mph)
486.4N / 168.4N / 486.4N (109.4lbf / 37.8lbf / 109.4lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
27
Fixed Antenna
1710~2170MHz, X-pol., H33˚ / V5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-HB-33-21-00T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
33˚
Vertical
5.0˚
Gain (dBi /dBd)
21.0 / 18.9
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 30dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 260mm x 90mm (72.0” x 10.2” x 3.5”)
Weight without Clamp
14.0kg (30.9lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
729.6N / 252.6N / 729.6N (164.1lbf / 56.7lbf / 164.1lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
28
Fixed Antenna
1710~2170MHz, X-pol., H45˚ / V7.5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-HB-45-19-00T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
45˚
Vertical
7.5˚
Gain (dBi /dBd)
18.6 / 16.5
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 30dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1219mm x 260mm x 90mm (48.0” x 10.2” x 3.5”)
9.0kg (19.8lbs)
60m/s (135mph)
486.4N / 168.4N / 486.4N (109.4lbf / 37.8lbf / 109.4lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
29
Fixed Antenna
1710~2170MHz, X-pol., H45 ˚ / V5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-HB-45-20-00T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
45˚
Vertical
5.0˚
Gain (dBi /dBd)
20.0 / 17.9
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 30dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 260mm x 90mm (72.0” x 10.2” x 3.5”)
Weight without Clamp
14.0kg (30.8lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
729.6N / 252.6N / 729.6N (164.1lbf / 56.7lbf / 164.1lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
30
Fixed Antenna
1710~2170MHz, X-pol., H65 ˚ / V14˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-ID-15-65-00T
Frequency Range
1710~2170MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
14.0˚
15.0 / 12.9
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
661mm x 166mm x 66mm (26.0” x 6.5” x 2.6”)
3.2kg (7.0lbs)
60m/s (135mph)
168.4N / 67.0N / 168.4N
(37.9lbf / 15.0lbf / 37.9lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
31
Fixed Antenna
1710~2170MHz, X-pol., H65 ˚ / V14˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-ID-15-65-03T
Frequency Range
1710~2170MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
14.0˚
15.0 / 12.9
Fixed Electrical Down Tilt
3.0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
661mm x 166mm x 66mm (26.0” x 6.5” x 2.6”)
3.2kg (7.0lbs)
60m/s (135mph)
168.4N / 67.0N / 168.4N
(37.9lbf / 15.0lbf / 37.9lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
32
Fixed Antenna
1710~2170MHz, X-pol., H65 ˚ / V14˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-ID-15-65-06T
Frequency Range
1710~2170MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
14.0˚
15.0 / 12.9
Fixed Electrical Down Tilt
6.0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
661mm x 166mm x 66mm (26.0” x 6.5” x 2.6”)
3.2kg (7.0lbs)
60m/s (135mph)
168.4N / 67.0N / 168.4N
(37.9lbf / 15.0lbf / 37.9lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
33
Fixed Antenna
1710~2170MHz, X-pol., H65 ˚ / V14˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-ID-15-65-09T
Frequency Range
1710~2170MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
14.0˚
15.0 / 12.9
Fixed Electrical Down Tilt
9.0˚
1st Upper Sidelobe Suppression
≥ 14dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
661mm x 166mm x 66mm (26.0” x 6.5” x 2.6”)
3.2kg (7.0lbs)
60m/s (135mph)
168.4N / 67.0N / 168.4N
(37.9lbf / 15.0lbf / 37.9lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
34
Fixed Antenna
1710~2170MHz, X-pol., H65˚ / V7.5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-ID-17-65-00T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.5˚
Gain (dBi /dBd)
17.0 / 14.9
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1142mm x 166mm x 66mm (50.0” x 6.5” x 2.6”)
5.2kg (11.5lbs)
60m/s (135mph)
290.9N / 115.7N / 290.9N
(65.4lbf / 26.0lbf / 65.4lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
35
Fixed Antenna
1710~2170MHz, X-pol., H65˚ / V7.5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-ID-17-65-03T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.5˚
Gain (dBi /dBd)
17.0 / 14.9
Fixed Electrical Down Tilt
3˚
1st Upper Sidelobe Suppression
≥ 16dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1142mm x 166mm x 66mm (50.0” x 6.5” x 2.6”)
5.2kg (11.5lbs)
60m/s (135mph)
290.9N / 115.7N / 290.9N
(65.4lbf / 26.0lbf / 65.4lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
36
Fixed Antenna
1710~2170MHz, X-pol., H65˚ / V6.5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-ID-18-65-00T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
6.5˚
Gain (dBi /dBd)
18.0 / 15.9
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 16dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1310mm x 166mm x 66mm (51.6” x 6.5” x 2.6”)
5.3kg (11.7lbs)
60m/s (135mph)
333.7N / 132.7N / 333.7N (75.0lbf / 29.8lbf / 75.0lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
37
Fixed Antenna
1710~2170MHz, X-pol., H65˚ / V6.5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-ID-18-65-02T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
6.5˚
Gain (dBi /dBd)
18.0 / 15.9
Fixed Electrical Down Tilt
2.0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1310mm x 166mm x 66mm (51.6” x 6.5” x 2.6”)
5.3kg (11.7lbs)
60m/s (135mph)
333.7N / 132.7N / 333.7N
(75.0lbf / 29.8lbf / 75.0lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
38
Fixed Antenna
1710~2170MHz, X-pol., H65˚ / V6.5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-ID-18-65-06T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
6.5˚
Gain (dBi /dBd)
18.0 / 15.9
Fixed Electrical Down Tilt
6˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1310mm x 166mm x 66mm (51.6” x 6.5” x 2.6”)
5.3kg (11.7lbs)
60m/s (135mph)
333.7N / 132.7N / 333.7N
(75.0lbf / 29.8lbf / 75.0lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
39
Fixed Antenna
1710~2170MHz, X-pol., H65˚ / V6.5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-ID-18-65-09T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
6.5˚
Gain (dBi /dBd)
18.0 / 15.9
Fixed Electrical Down Tilt
9˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1310mm x 166mm x 66mm (51.6” x 6.5” x 2.6”)
5.3kg (11.7lbs)
60m/s (135mph)
333.7N / 132.7N / 333.7N
(75.0lbf / 29.8lbf / 75.0lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
40
Fixed Antenna
1710~2170MHz, X-pol., H65 ˚ / V5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-HB-65-19-00T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
5.0˚
Gain (dBi /dBd)
19.3 / 17.2
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1829mm x 166mm x 66mm (72.0” x 6.5” x 2.6”)
9.0kg (19.9lbs)
60m/s (135mph)
465.9N / 185.2N / 104.7N (104.7lbf / 41.7lbf / 104.7lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
41
Fixed Antenna
1710~2170MHz, X-pol., H90 ˚ / V7.5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-HB-90-17-00T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
90˚
Vertical
7.5˚
Gain (dBi /dBd)
16.6 / 14.5
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 23dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1219mm x 166mm x 66mm (48.0” x 6.5” x 2.6”)
5.5kg (12.1lbs)
60m/s (135mph)
310N / 123N / 310.7N (69.0lbf / 27.0lbf / 69.0lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
42
Fixed Antenna
1710~2170MHz, X-pol., H90˚ / V5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-HB-90-18-00T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
90˚
Vertical
5.0˚
Gain (dBi /dBd)
17.5 / 15.4
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 23dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1829mm x 166mm x 66mm (72.0” x 6.5” x 2.6”)
9.0kg (19.9lbs)
60m/s (135mph)
465.9N / 185.2N / 104.7N (104.7lbf / 41.7lbf / 104.7lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
43
Fixed Antenna
1710~2170MHz, XX-pol., H65 ˚/65˚ / V14˚/14˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
2FX-X-ID-15-65-03T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚ / 65˚
Vertical
14˚ / 14˚
Gain (dBi /dBd)
2 x 14.8 / 2 x 12.7
Fixed Electrical Down Tilt
3˚ / 3˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
661mm x 362mm x 66mm (26.0” x 14.3” x 2.6”)
Weight without Clamp
12.6kg (27.8lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
367.2N / 67.0N / 367.2N
(82.6lbf / 15.0lbf / 82.6lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
44
Fixed Antenna
1710~2170MHz, XX-pol., H65 ˚/65˚ / V14˚/14˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
2FX-X-ID-15-65-06T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚ / 65˚
Vertical
14˚ / 14˚
Gain (dBi /dBd)
2 x 15.0 / 2 x 12.9
Fixed Electrical Down Tilt
6˚ / 6˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
661mm x 362mm x 66mm (26.0” x 14.3” x 2.6”)
Weight without Clamp
12.6kg (27.8lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
367.2N / 67.0N / 367.2N (82.6lbf / 15.0lbf / 82.6lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
45
Fixed Antenna
1710~2170MHz, XX-pol., H65 ˚/65˚ / V14˚/14˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
2FX-X-ID-17-65-00T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚ / 65˚
Vertical
14˚ / 14˚
Gain (dBi /dBd)
2 x 17.0 / 2 x 14.9
Fixed Electrical Down Tilt
0˚ / 0˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1142mm x 362mm x 66mm (45.0” x 14.3” x 2.6”)
Weight without Clamp
10.4kg (22.9lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
634.4N / 115.7N / 634.4N (142.7lbf / 26.0lbf / 142.7lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
46
Fixed Antenna
1710~2170MHz, XX-pol., H65˚ / V7.5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-Q-HB-65-18-00T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.5˚
Gain (dBi /dBd)
17.8 / 15.7
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 8dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1219mm x 260mm x 90mm (48.0” x 10.2” x 3.5”)
9.5kg (21.0lbs)
60m/s (135mph)
486.4N / 168.4N / 486.4N (109.4lbf / 37.8lbf / 109.4lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
47
Fixed Antenna
1710~2170MHz, XX-pol., H65˚ / V5˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-Q-HB-65-19-00T
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
5.0˚
Gain (dBi /dBd)
19.3 / 17.2
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 8dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 260mm x 90mm (72.0” x 10.2” x 3.5”)
Weight without Clamp
15.0kg (33.1lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
729.9N / 252.6N / 729.9N (164.1lbf / 56.8lbf / 164.1lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
48
Fixed Antenna
2300~2690MHz, X-pol., H33 ˚ / V6˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-WL-33-19-00T
Frequency Range
2300~2690MHz
3dB
Beam-Width
Horizontal
33˚
Vertical
6.0˚
Gain (dBi /dBd)
19.4 / 17.3
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 30dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
200W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1219mm x 260mm x 90mm (48.0” x 10.2” x 3.5”)
9.0kg (19.8lbs)
60m/s (135mph)
486.4N / 168.3N / 486.4N (109.4lbf / 37.9lbf / 109.4lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
49
Fixed Antenna
2300~2690MHz, X-pol., H65 ˚ / V14˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-WL-65-15-00T
Frequency Range
2300~2690MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
14.0˚
15.0 / 12.9
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 8dB
200W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
609mm x 166mm x 66mm (24.0” x 6.5” x 2.6”)
3.5kg (7.7lbs)
60m/s (135mph)
155.2N / 61.7N / 155.2N (34.9lbf / 13.9lbf / 34.9lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
50
Fixed Antenna
2300~2690MHz, X-pol., H65 ˚ / V6˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-WL-65-18-00T
Frequency Range
2300~2690MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
6.0˚
Gain (dBi /dBd)
18.0 / 15.9
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 8dB
200W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1219mm x 166mm x 66mm (48.0” x 6.5” x 2.6”)
5.5kg (12.0lbs)
60m/s (135mph)
310.6N / 123.5N / 310.6N (69.9lbf / 27.8lbf / 69.9lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
51
Fixed Antenna
2300~2690MHz, X-pol., H65 ˚ / V7˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-WM-17-65-00T
Frequency Range
2300~2700MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.0˚
Gain (dBi /dBd)
Fixed Electrical Down Tilt
17.0 / 14.9
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Input Maximum CW Power
Impedance
Dual, Slant
±45˚
100W
50Ω
VSWR (Return Loss)
≤1.5:1
Isolation Between Ports
≥ 28dB
Passive Inter-modulation, IM3
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
1238mm x 166mm x 85mm
5.0kg
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
2 x N(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
52
Fixed Antenna
2300~2690MHz, XX-pol., H65 ˚ / V7˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
2FX-X-WM-17-65-00T
Frequency Range
2300~2690MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.0˚
Gain (dBi /dBd)
Fixed Electrical Down Tilt
17.0 / 14.9
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Input Maximum CW Power
Impedance
Dual, Slant
±45˚
100W
50Ω
VSWR (Return Loss)
≤1.5:1
Isolation Between Ports
≥ 30dB
Passive Inter-modulation, IM3
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
1228mm x 260mm x 90mm
9.0kg
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
4 x N(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
53
Fixed Antenna
3300~3700MHz, X-pol., H65 ˚ / V7˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-W3-65-17-00T
Frequency Range
3300~3700MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.0˚
Gain (dBi /dBd)
Fixed Electrical Down Tilt
17.0 / 14.9
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Dual, Slant
Input Maximum CW Power
50W
Impedance
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
±45˚
≤1.5:1 (≥ 14.0dB)
≥ 25dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
800mm x 166mm x 66mm
3.5kg
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
2 x N(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
54
Fixed Antenna
3300~3700MHz, XX-pol., H65˚ / V7˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-Q-W3-65-17-00T
Frequency Range
3300~3700MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.0˚
Gain (dBi /dBd)
Fixed Electrical Down Tilt
17.0 / 14.9
0˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Dual, Slant
Input Maximum CW Power
50W
Impedance
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
±45˚
≤1.5:1 (≥ 14.0dB)
≥ 25dB
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
800mm x 166mm x 66mm
6.0kg
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
4 x N(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
55
Fixed Antenna
698~894MHz, X-pol., H65˚ / V17˚
1710~2170MHz, X-pol., H65 ˚ / V8˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-CH-65-15-65-17-00T
Frequency Band
698~894MHz
Frequency Range
3dB
Beam-Width
1710~2170MHz
698~824MHz
824~ 894MHz
1710~1990MHz
1920~ 2170MHz
68˚
63˚
67˚
62˚
18.0˚
17.0˚
8.2˚
7.5˚
14.2 / 12.1
14.7 / 12.6
16.6 / 14.5
17.0 / 14.9
Horizontal
Vertical
Gain (dBi /dBd)
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 16dB
≥ 16dB
Front-to-Back Ratio
≥ 27dB
≥ 27dB
Polarization Type
Boresight
Cross –Polar
Discrimination
±45˚
Dual, Slant
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Between Ports
Dual, Slant
±45˚
≥ 15dB
≥ 15dB
≥ 10dB
≥ 10dB
500W
300W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 30dB
≥ 30dB
Isolation
Between Bands
≥ 35dB (698~894MHz // 1710~2170MHz)
Passive Intermodulation, IM3
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 300mm x 150mm (48.0” x 11.8” x 6.0”)
Weight without Clamp
14.0kg (30.8lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
561.2N / 280.6N / 561.2N (126.2lbf / 63.1lbf / 126.2lbf)
Connector (Type / Position)
4 x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
56
Fixed Antenna
698~894MHz, X-pol., H65˚ / V12˚
1710~2170MHz, X-pol., H65 ˚ / V7˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-CH-65-16-65-18-00T
Frequency Band
698~894MHz
Frequency Range
3dB
Beam-Width
1710~2170MHz
698~824MHz
824~ 894MHz
1710~1990MHz
1920~ 2170MHz
68˚
63˚
67˚
62˚
13.0˚
12.0˚
7.3˚
6.7˚
15.5 / 13.4
16.2 / 14.1
17.5 / 15.4
18.0 / 15.9
Horizontal
Vertical
Gain (dBi /dBd)
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 16dB
≥ 16dB
Front-to-Back Ratio
≥ 27dB
≥ 27dB
Polarization Type
Boresight
Cross –Polar
Discrimination
±45˚
Dual, Slant
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Between Ports
Dual, Slant
±45˚
≥ 15dB
≥ 15dB
≥ 10dB
≥ 10dB
500W
300W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 30dB
≥ 30dB
Isolation
Between Bands
≥ 35dB (698~894MHz // 1710~2170MHz)
Passive Intermodulation, IM3
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 300mm x 150mm (72.0” x 11.8” x 6.0”)
Weight without Clamp
20.0kg (44.1lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
842N / 421N / 842N (189.4lbf / 94.7lbf / 189.4lbf)
Connector (Type / Position)
4 x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
57
Fixed Antenna
790~960MHz, X-pol., H65 ˚ / V16.5˚
1710~2170MHz, X-pol., H65 ˚ / V8˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-GH-65-15-65-17-00T
Frequency Band
790~960MHz
Frequency Range
3dB
Beam-Width
1710~2170MHz
790~894MHz
880~ 960MHz
1710~1990MHz
1920~ 2170MHz
68˚
63˚
67˚
62˚
17.0˚
16.0˚
8.2˚
7.5˚
14.7 / 12.6
15.2 / 13.1
16.6 / 14.5
17.0 / 14.9
Horizontal
Vertical
Gain (dBi /dBd)
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 16dB
≥ 16dB
Front-to-Back Ratio
≥ 25dB
≥ 25dB
Polarization Type
Boresight
Cross –Polar
Discrimination
±45˚
Dual, Slant
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Between Ports
Dual, Slant
±45˚
≥ 15dB
≥ 15dB
≥ 10dB
≥ 10dB
350W
250W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 30dB
≥ 30dB
Isolation
Between Bands
≥ 35dB (790~960MHz // 1710~2170MHz)
Passive Intermodulation, IM3
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 300mm x 150mm (48.0” x 11.8” x 6.0”)
Weight without Clamp
13.5kg (29.7lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
561.2N / 280.6N / 561.2N (126.2lbf / 63.1lbf / 126.2lbf)
Connector (Type / Position)
4 x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
58
Fixed Antenna
790~960MHz, X-pol., H65˚ / V11˚
1710~2170MHz, X-pol., H65 ˚ / V7˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-GH-65-17-65-18-00T
Frequency Band
790~960MHz
Frequency Range
3dB
Beam-Width
1710~2170MHz
790~894MHz
880~ 960MHz
1710~1990MHz
1920~ 2170MHz
68˚
63˚
67˚
62˚
12.0˚
11.0˚
7.3˚
6.7˚
16.2 / 14.1
16.7 / 14.6
17.0 / 14.9
17.5 / 15.4
Horizontal
Vertical
Gain (dBi /dBd)
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 16dB
≥ 16dB
Front-to-Back Ratio
≥ 25dB
≥ 30dB
Polarization Type
Boresight
Cross –Polar
Discrimination
±45˚
Dual, Slant
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Between Ports
Dual, Slant
±45˚
≥ 15dB
≥ 15dB
≥ 10dB
≥ 10dB
350W
250W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 30dB
≥ 30dB
Isolation
Between Bands
≥ 35dB (790~960MHz // 1710~2170MHz)
Passive Intermodulation, IM3
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 300mm x 150mm (72.0” x 11.8” x 6.0”)
Weight without Clamp
18.0kg (39.7lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
842N / 421N / 842N (189.4lbf / 94.7lbf / 189.4lbf)
Connector (Type / Position)
4 x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
59
Fixed Antenna
870~960MHz, X-pol., H65˚ / V28˚
1710~2170MHz, X-pol., H65˚ / V14˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-BB-12/14-65-00T
Frequency Range
3dB
Beam-Width
Horizontal
Vertical
Gain (dBi /dBd)
870~960MHz
1710~2170MHz
65˚
65˚
28.0˚
14˚
12.0 / 9.9
14.0 / 11.9
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
≥ 15dB
Front-to-Back Ratio
≥ 25dB
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Isolation
Between Ports
Between Ports
Between Bands
Passive Inter-modulation, IM3
±45˚
Dual, Slant
±45˚
≥ 15dB
≥ 15dB
≥ 10dB
≥ 10dB
200W
200W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 30dB
≥ 30dB
≥ 35dB (870~960MHz // 1710~2170MHz)
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
710mm x 270mm x 128mm (28.0” x 10.6” x 5.0”)
Weight without Clamp
6.2kg (13.6lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
294.0N / 139.5N / 294.0N (66.2lbf / 31.4lbf / 66.2lbf)
Connector (Type / Position)
4 x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
60
Fixed Antenna
824~960MHz, X-pol., H65˚ / V13˚
1710~1880MHz, X-pol., H60˚ / V7˚
F
ix
e
d
A
n
te
n
n
a
Electrical Specification
Product Number
FX-X-CDG-15/17-65-06T
Frequency Range
3dB
Beam-Width
Horizontal
Vertical
Gain (dBi /dBd)
824~960MHz
1710~1880MHz
65˚
65˚
13.0˚
7.0˚
15.0 / 12.9
17.0 / 14.9
Fixed Electrical Down Tilt
0˚
1st Upper Sidelobe Suppression
≥ 15dB
≥ 15dB
Front-to-Back Ratio
≥ 25dB
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Isolation
Between Ports
Between Ports
Between Bands
Passive Inter-modulation, IM3
±45˚
Dual, Slant
±45˚
≥ 15dB
≥ 15dB
≥ 10dB
≥ 10dB
200W
200W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 30dB
≥ 30dB
≥ 35dB (824~960MHz // 1710~2170MHz)
≤ -150dBc (@2x43dBm)
Mechanical Specification
Dimension
(Length x Width x Depth)
1638mm x 270mm x 128mm (66.3” x 6.7” x 5.0”)
Weight without Clamp
13.0kg (28.6lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
439.0N / 330.6N / 439.0N (98.7lbf / 74.4lbf / 98.7lbf)
Connector (Type / Position)
4 x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
61
E DTA S ing le A ntenna
Product List
Model No.
Frequency
Pol.
HPBW
(degree)
Gain
(dBi)
Tilt
(degree)
RET
Page
ET-X-CW-65-14-iR
698~894
X-pol.
65
14
2~16
iRET
63
ET-X-CW-65-16-iR
698~894
X-pol.
65
16
2~16
iRET
64
ET-X-CW-65-18-iR
698~894
X-pol.
65
18
2~10
iRET
65
ET-X-CW-85-13-iR
698~894
X-pol.
85
13
2~16
iRET
66
ET-X-CW-85-15-iR
698~894
X-pol.
85
15
2~16
iRET
67
ET-X-CW-85-16-iR
698~894
X-pol.
85
16
2~10
iRET
68
ET-X-GW-65-15-kR
790~960
X-pol.
65
15
0~14
Knob
69
ET-X-GW-65-16-kR
790~960
X-pol.
65
16
0~8
Knob
70
ET-X-GW-65-17-kR
790~960
X-pol.
65
17
0~6
Knob
71
ET-X-GW-85-14-kR
790~960
X-pol.
85
14
0~14
Knob
72
ET-X-GW-85-15-kR
790~960
X-pol.
85
15
0~8
Knob
73
ET-X-GW-85-16-kR
790~960
X-pol.
85
16
0~6
Knob
74
ET-Q-GW-65-15-kR
790~960
XX-pol.
65
15
0~14
Knob
75
ET-Q-GW-65-16-kR
790~960
XX-pol.
65
16
0~8
Knob
76
ET-Q-GW-65-17-kR
790~960
XX-pol.
65
17
0~6
Knob
77
ET-X-LJ-65-17-iC
1427~1486
X-pol.
65
17
0~10
iCBT
78
ET-X-LJ-90-16-iC
1427~1486
X-pol.
90
16
0~10
iCBT
79
AH-X-ID-20-33-00T
1710~2170
X-pol.
33
20
0~8
Knob
80
ET-X-HB-33-21-kR-
1710~2170
X-pol.
33
21
0~6
Knob
81
ET-X-HB-45-18-kR
1710~2170
X-pol.
45
18
0~10
Knob
82
ET-X-HB-45-20-kR
1710~2170
X-pol.
45
20
0~6
Knob
83
AH-X-ID-15-65-00T-A
1710~2170
X-pol.
65
15
0~12
Knob
84
AH-X-ID-17-65-00T-A
1710~2170
X-pol.
65
17
0~10
Knob
85
AH-X-ID-18-65-00T
1710~2170
X-pol.
65
18
0~8
Knob
86
ET-X-HB-65-19-kR
1710~2170
X-pol.
65
19
0~6
Knob
87
2AH-X-ID-15-65-00T-A
1710~2170
XX-pol.
65
15
0~12
Knob
88
2AH-X-ID-17-65-00T-A
1710~2170
XX-pol.
65
17
0~10
Knob
89
2AH-X-ID-18-65-00T
1710~2170
XX-pol.
65
18
0~8
Knob
90
ET-X-WL-65-15-kR
2300~2690
X-pol.
65
15
0~10
Knob
91
ET-X-WL-65-18-kR
2300~2690
X-pol.
65
18
0~10
Knob
92
ET-Q-WL-65-18-kR
2300~2690
XX-pol.
65
18
0~10
Knob
93
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Notice;
1. In case of Knob-RET, RET can be interconnected later by separate purchasing.
2. In case of IRET or iCBT, iRET or iCBT is embedded on Antenna.
62
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
698~894MHz, X-pol., H65 ˚ / V17˚, ET2~16˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-CW-65-14-iR
Frequency Range
698~894MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
17.0˚
14.5 / 12.4
Electrical Down Tilt Range
2˚ ~ 16˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
500W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 300mm x 150mm (48.0” x 11.8” x 6.0”)
Weight without Clamp
14.0kg (30.8lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
561.2N / 280.6N / 561.2N (126.2lbf / 63.1lbf / 126.2lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
63
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
698~894MHz, X-pol., H65 ˚ / V12˚, ET2~16˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-CW-65-16-iR
Frequency Range
698~894MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
12.0˚
16.0 / 13.9
Electrical Down Tilt Range
2˚ ~ 16˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
500W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 300mm x 150mm (72.0” x 11.8” x 6.0”)
Weight without Clamp
19.0kg (41.8lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
842N / 421N / 842N (189.4lbf / 94.7lbf / 189.4lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
64
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
698~894MHz, X-pol., H65˚ / V8˚, ET2~10˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-CW-65-18-iR
Frequency Range
698~894MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
8.0˚
Gain (dBi /dBd)
17.5 / 15.4
Electrical Down Tilt Range
2˚ ~ 10˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
500W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
2438mm x 300mm x 150mm (96.0” x 11.8” x 6.0”)
Weight without Clamp
24.0kg (52.9lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
1122.4N / 561.2N / 1122.4N
(252.4lbf / 126.2lbf / 252.4lbf)
Connector (Type / Position)
2x 7/16” DIN(Female) / Bottom
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
65
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
698~894MHz, X-pol., H85 ˚ / V17˚, ET2~16˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-CW-85-13-iR
Frequency Range
698~894MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
85˚
17.0˚
13.0 / 10.9
Electrical Down Tilt Range
2˚ ~ 16˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 23dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
500W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 300mm x 150mm (48.0” x 11.8” x 6.0”)
Weight without Clamp
14.0kg (30.8lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
561.2N / 280.6N / 561.2N (126.2lbf / 63.1lbf / 126.2lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
66
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
698~894MHz, X-pol., H85 ˚ / V12˚, ET2~16˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-CW-85-15-iR
Frequency Range
698~894MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
85˚
12.0˚
14.2 / 12.4
Electrical Down Tilt Range
2˚ ~ 16˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 23dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
500W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 300mm x 150mm (72.0” x 11.8” x 6.0”)
Weight without Clamp
19.0kg (41.8lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
842N / 421N / 842N (189.4lbf / 94.7lbf / 189.4lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
67
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
698~894MHz, X-pol., H85˚ / V8˚, ET2~10˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-CW-85-16-iR
Frequency Range
698~894MHz
3dB
Beam-Width
Horizontal
85˚
Vertical
8.0˚
Gain (dBi /dBd)
15.5 / 13.4
Electrical Down Tilt Range
2˚ ~ 10˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 23dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
500W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
2438mm x 300mm x 150mm (96.0” x 11.8” x 6.0”)
Weight without Clamp
24.0kg (52.9lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
1122.4N / 561.2N / 1122.4N
(252.4lbf / 126.2lbf / 252.4lbf)
Connector (Type / Position)
2x 7/16” DIN(Female) / Bottom
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
68
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
790~960MHz, X-pol., H65 ˚ / V15˚, ET0~14˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-GW-65-15-kR
Frequency Range
790~960MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
15.5˚
14.5 / 12.4
Electrical Down Tilt Range
0˚ ~ 14˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1290mm x 270mm x 130mm (50.8” x 10.6” x 5.1”)
9.0kg (19.8lbs)
60m/s (135mph)
534.6N / 257.4N / 534.6N (120.2lbf / 57.9lbf / 120.2lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
69
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
790~960MHz, X-pol., H65˚ / V9.5˚, ET0~8˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-GW-65-16-kR
Frequency Range
790~960MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
9.5˚
Gain (dBi /dBd)
16.5 / 14.4
Electrical Down Tilt Range
0˚ ~ 8˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
2020mm x 270mm x 130mm (79.5” x 10.6” x 5.1”)
Weight without Clamp
14.5kg (32.0lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
837.1N / 403.0N / 837.1N (188.3lbf / 90.6lbf / 188.3lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
70
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
790~960MHz, X-pol., H65˚ / V7.3˚, ET0~6˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-GW-65-17-kR
Frequency Range
790~960MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.3˚
Gain (dBi /dBd)
17.5 / 15.4
Electrical Down Tilt Range
0˚ ~ 6˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 10dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
2550mm x 270mm x 130mm (100.4” x 10.6” x 5.1”)
Weight without Clamp
17.5kg (38.6lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
1056.1N / 508.8N / 1056.7N
(237.7.3lbf / 114.4lbf / 237.7lbf)
Connector (Type / Position)
2x 7/16” DIN(Female) / Bottom
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
71
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
790~960MHz, X-pol., H85 ˚ / V15˚, ET0~14˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-GW-85-14-kR
Frequency Range
790~960MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
85˚
15.5˚
13.5 / 11.4
Electrical Down Tilt Range
0˚ ~ 14˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 23dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1290mm x 270mm x 130mm (50.8” x 10.6” x 5.1”)
9.5kg (21.0lbs)
60m/s (135mph)
534.6N / 257.4N / 534.6N (120.2lbf / 57.9lbf / 120.2lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
72
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
790~960MHz, X-pol., H85˚ / V9.5˚, ET0~8˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-GW-85-15-kR
Frequency Range
790~960MHz
3dB
Beam-Width
Horizontal
85˚
Vertical
9.5˚
Gain (dBi /dBd)
15.5 / 13.4
Electrical Down Tilt Range
0˚ ~ 8˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 23dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
2020mm x 270mm x 130mm (79.5” x 10.6” x 5.1”)
12.5.0kg (27.6lbs)
60m/s (135mph)
837.1N / 403.0N / 837.1N
(188.3lbf / 90.6lbf / 188.3lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
73
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
790~960MHz, X-pol., H85˚ / V7.3˚, ET0~6˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-GW-85-16-kR
Frequency Range
790~960MHz
3dB
Beam-Width
Horizontal
85˚
Vertical
7.3˚
Gain (dBi /dBd)
16.5 / 14.4
Electrical Down Tilt Range
0˚ ~ 6˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 23dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
2550mm x 270mm x 130mm (100.4” x 10.6” x 5.1”)
17.5.0kg (38.6lbs)
60m/s (135mph)
1056.7N / 508.8N / 105671N
(237.7lbf / 114.4lbf / 237.7lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
74
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
790~960MHz, XX-pol., H65 ˚ / V15˚, ET0~14˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-Q-GW-65-15-kR
Frequency Range
790~960MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
15.5˚
14.5 / 12.4
Electrical Down Tilt Range
0˚ ~ 14˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 8dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
1290mm x 570mm x 130mm (50.8” x 22.4” x 5.1”)
Weight without Clamp
18.0kg (39.7lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1128.5N / 257.4N / 1128.5N
(258.3lbf / 57.9lbf / 258.3lbf)
4x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
75
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
790~960MHz, XX-pol., H65˚ / V9.5˚, ET0~8˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-Q-GW-65-16-kR
Frequency Range
790~960MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
9.5˚
Gain (dBi /dBd)
16.5 / 14.4
Electrical Down Tilt Range
0˚ ~ 8˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 8dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
2020mm x 570mm x 130mm (79.5” x 10.6” x 5.1”)
Weight without Clamp
30.0kg (66.1lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1767.2N / 403.0N / 1767.2N
(397.4lbf / 90.6lbf / 397.4lbf)
4x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
76
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
790~960MHz, XX-pol., H65˚ / V7.3˚, ET0~6˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-Q-GW-65-17-kR
Frequency Range
790~960MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.3˚
Gain (dBi /dBd)
17.5 / 15.4
Electrical Down Tilt Range
0˚ ~ 6˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 8dB
350W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
2550mm x 570mm x 130mm (100.4” x 10.6” x 5.1”)
Weight without Clamp
35.0kg (77.2lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
2230.8N / 508.8N / 2230.8N
(501.7lbf / 114.4lbf / 501.7lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
77
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET/CBT
1427~1486MHz, X-pol., H65˚ / V6.5˚, ET0~10˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-LJ-65-17-iC
Frequency Range
1427~1486MHz
3dB
Beam-Width
Horizontal
68˚
Vertical
6.5˚
Gain (dBi /dBd)
17.0 / 14.9
Electrical Down Tilt Range
0˚ ~ 10˚
1st Upper Sidelobe Suppression
≥ 20dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥10dB
160W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET/CBT , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1800mm x  156mm (70.9” x 6.1”)
Weight without Clamp
14.0kg (30.9lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
287.4N / 287.4N / 287.4N
(64.6lbf / 64.6lbf / 64.6lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
78
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET/CBT
1427~1486MHz, X-pol., H90 ˚ / V6.5˚, ET0~10˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-LJ-90-16-iC
Frequency Range
1427~1486MHz
3dB
Beam-Width
Horizontal
90˚
Vertical
6.5˚
Gain (dBi /dBd)
16.0 / 13.9
Electrical Down Tilt Range
0˚ ~ 10˚
1st Upper Sidelobe Suppression
≥ 20dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥10dB
160W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET/CBT , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1800mm x  156mm (70.9” x 6.1”)
Weight without Clamp
14.0kg (30.9lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
287.4N / 287.4N / 287.4N (64.6lbf / 64.6lbf / 64.6lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
79
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
1710~2170MHz, X-pol., H33˚/ V7.5˚, ET0~8˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
AH-X-ID-20-33-00T-A
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
33˚
Vertical
7.5˚
Gain (dBi /dBd)
19.5 / 17.4
Electrical Down Tilt Range
0˚ ~ 8˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥10dB
200W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14.0dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob – RET
Mechanical Specification
Dimension
(Length x Width x Depth)
1366mm x 260mm x 90mm (53.8” x 10.2” x 3.5”)
Weight without Clamp
13.6kg (29.9lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
545.0N / 188.6N / 545.0N (122.6lbf / 42.3lbf / 122.6lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
80
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
1710~2170MHz, X-pol., H33 ˚ / V5˚, ET0~6˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-HB-33-21-kR
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
33˚
Vertical
5.0˚
Gain (dBi /dBd)
20.5 / 18.4
Electrical Down Tilt Range
0˚ ~ 6˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 30dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 260mm x 90mm (72.0” x 10.2” x 3.5”)
Weight without Clamp
15.0kg (33.1lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
729.6N / 252.6N / 729.6N (164.1lbf / 56.7lbf / 164.1lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
81
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
1710~2170MHz, X-pol., H45 ˚ / V7.5˚, ET0~10˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-HB-45-18-kR
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
45˚
Vertical
7.5˚
Gain (dBi /dBd)
18.1/ 16.0
Electrical Down Tilt Range
0˚ ~ 10˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 30dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 260mm x 90mm (48.0” x 10.2” x 3.5”)
Weight without Clamp
10.0kg (22.0lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
486.4N / 168.4N / 486.4N (109.4lbf / 37.8lbf / 109.4lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
82
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
1710~2170MHz, X-pol., H45 ˚ / V5˚, ET0~6˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-HB-45-20-kR
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
45˚
Vertical
5.0˚
Gain (dBi /dBd)
19.5 / 17.4
Electrical Down Tilt Range
0˚ ~ 6˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 30dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 260mm x 90mm (72.0” x 10.2” x 3.5”)
Weight without Clamp
15.0kg (33.1lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
729.6N / 252.6N / 729.6N (164.1lbf / 56.7lbf / 164.1lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
83
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
1710~2170MHz, X-pol., H65˚/ V13.5˚, ET0~12˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
AH-X-ID-15-65-00T-A
Frequency Range
1710~2170MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚
13.5˚
14.5 / 12.4
Electrical Down Tilt Range
0˚ ~ 12˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥10dB
200W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob – RET AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
672mm x 166mm x 66mm (26.4” x 6.5” x 2.6”)
3.3kg (7.2lbs)
60m/s (135mph)
171.1N / 68.1N / 171.1N (38.5lbf / 15.3lbf / 38.5lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
84
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
1710~2170MHz, X-pol., H65 ˚/ V7.5˚, ET0~10˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
AH-X-ID-17-65-00T-A
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.5˚
Gain (dBi /dBd)
16.5 / 14.4
Electrical Down Tilt Range
0˚ ~ 10˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥10dB
200W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob – RET AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1310mm x 166mm x 66mm (51.6” x 6.5” x 2.6”)
6.0kg (13.2lbs)
60m/s (135mph)
333.7N / 132.7N / 333.7N (75.0lbf / 29.8lbf / 75.0lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
85
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
1710~2170MHz, X-pol., H65˚/ V6.3˚, ET0~8˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
AH-X-ID-18-65-00T-A
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
6.3˚
Gain (dBi /dBd)
17.5 / 15.4
Electrical Down Tilt Range
0˚ ~ 8˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥10dB
200W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob – RET AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1486mm x 166mm x 66mm (58.5” x 6.5” x 2.6”)
6.5kg (14.3lbs)
60m/s (135mph)
378.5N / 150.5N / 378.7N (85.1bf / 33.8lbf / 85.1lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
86
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
1710~2170MHz, X-pol., H65 ˚ / V5˚, ET0~6˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-HB-65-19-kR
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
5.0˚
Gain (dBi /dBd)
18.8 / 16.7
Electrical Down Tilt Range
0˚ ~ 6˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥10dB
250W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 166mm x 66mm (72.0” x 6.5” x 2.6”)
Weight without Clamp
10.0kg (22.0lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
465.9N / 185.2N / 104.7N (104.7lbf / 41.7lbf / 104.7lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
87
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
1710~2170MHz, XX-pol., H65˚/65˚ / V13.5˚/13.5˚ , ET0~12˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
2AH-X-ID-15-65-00T-A
Frequency Range
1710 ~ 2170MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
65˚ / 65˚
13.5˚ / 13.5˚
2 x 14.5 / 2 x 12.4
Electrical Down Tilt Range
0˚ ~ 12˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
200W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤ 1.5:1 (≥ 14.0dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob – RET
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
672mm x 362mm x 66mm (26.4” x 14.3” x 2.6”)
6.6kg (14.5lbs)
60m/s (135mph)
373.3N / 68.1N / 373.3N (3.89lbf / 0.71lbf / 3.89lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
88
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
1710~2170MHz, XX-pol., H65 ˚/65˚ / V7.5˚/7.5˚ , ET0~10˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
2AH-X-ID-17-65-00T-A
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚ / 65˚
Vertical
7.5˚ / 7.5˚
Gain (dBi /dBd)
2 x 16.5 / 2 x 14.4
Electrical Down Tilt Range
0˚ ~ 10˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
200W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob – RET
Mechanical Specification
Dimension
(Length x Width x Depth)
1310mm x 362mm x 66mm (51.6” x 14.3” x 2.6”)
Weight without Clamp
10.6kg (23.3lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
727.7N / 132.7N / 727.7N (136.7lbf / 29.8lbf / 136.7lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
89
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
1710~2170MHz, XX-pol., H65 ˚/65˚ / V6.3˚/6.3˚ , ET0~8˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
2AH-X-ID-18-65-00T-A
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚ / 65˚
Vertical
6.3˚ / 6.3˚
Gain (dBi /dBd)
2 x 17.5 / 2 x 15.4
Electrical Down Tilt Range
0˚ ~ 8˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 15dB
≥ 10dB
200W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤ 1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob – RET
Mechanical Specification
Dimension
(Length x Width x Depth)
1486mm x 362mm x 66mm (58.5” x 14.3” x 2.6”)
Weight without Clamp
14.0kg (30.8lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
825.7N / 150.5N / 825.7N (185.7lbf / 33.9lbf / 185.7lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
90
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
2300~2690MHz, X-pol., H65 ˚ / V14˚, ET0~10˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-WL-65-15-kR
Frequency Range
2300~2690MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
14˚
Gain (dBi /dBd)
14.5 / 12.4
Electrical Down Tilt Range
0˚ ~ 10˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 8dB
200W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
609mm x 166mm x 66mm (24.0” x 6.5” x 2.6”)
4.5kg (9.9lbs)
60m/s (135mph)
155.2N / 61.7N / 155.2N (34.9lbf / 13.9lbf / 34.9lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
91
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
2300~2690MHz, X-pol., H65˚ / V6˚, ET0~10˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-WL-65-18-kR
Frequency Range
2300~2690MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
6˚
Gain (dBi /dBd)
17.5 / 15.4
Electrical Down Tilt Range
0˚ ~ 10˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 8dB
200W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1219mm x 166mm x 66mm (48.0” x 6.5” x 2.6”)
6.5kg (14.3lbs)
60m/s (135mph)
310.6N / 123.5N / 310.6N (69.9lbf / 27.8lbf / 69.9lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
92
EDTA (Electrical Down Tilt Antenna)
Field Attachable Knob-RET
2300~2690MHz, XX-pol., H65 ˚ / V6˚, ET0~10˚
E
D
T
A
S
in
g
l
e
A
n
te
n
n
a
Electrical Specification
Product Number
ET-Q-WL-65-18-kR
Frequency Range
2300~2690MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
6˚
Gain (dBi /dBd)
17.5 / 15.4
Electrical Down Tilt Range
0˚ ~ 10˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
Dual, Slant
Boresight
60
Input Maximum CW Power
±45˚
≥ 18dB
≥ 8dB
200W
50Ω
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field attachable Knob - RET
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 260mm x 90mm (48.0” x 10.2” x 3.5”)
Weight without Clamp
12.5kg (27.6lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
486.4N / 168.4N / 486.4N (109.4lbf / 37.9lbf / 109.4lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
93
E DTA D ual A ntenna
Product List
Model No.
ET-X-CH-65-14-65-16-IR
Frequency
698~894 /
Pol.
XX-pol.
HPBW
(degree)
Gain
(dBi)
(degree)
65/65
14/16
2~16
698~894 /
XX-pol.
65/65
16/17
790~960 /
XX-pol.
65/65
14/17
790~960 /
1710~2170
iRET
95
2~16
iRET
96
0~14
iRET
97
iRET
98
0~10
1710~2170
ET-X-GH-65-16-65-18-IR
E
D
T
A
D
u
a
l
A
n
te
n
n
a
Page
0~10
1710~2170
ET-X-GH-65-14-65-17-IR
RET
0~10
1710~2170
ET-X-CH-65-16-65-17-IR
Tilt
XX-pol.
65/65
16/18
0~14
0~10
Notice;
1. In case of Knob-RET, RET can be interconnected later by separate purchasing.
2. In case of IRET or iCBT, iRET or iCBT is embedded on Antenna.
94
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
698~894MHz, X-pol., H65 ˚ / V17˚, ET2~16˚
1710~2170MHz, X-pol., H65˚ / V8˚, ET0~10˚
E
D
T
A
D
u
a
l
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-CH-65-14-65-16-iR
Frequency Band
698~894MHz
Frequency Range
3dB
Beam-Width
1710~2170MHz
698~824MHz
824~ 894MHz
1710~1990MHz
1920~ 2170MHz
68˚
63˚
67˚
62˚
18.0˚
17.0˚
8.2˚
7.5˚
14.0 / 11.9
14.5 / 12.4
16.1 / 14.0
16.5 / 14.4
Horizontal
Vertical
Gain (dBi /dBd)
Electrical Down Tilt Range
2˚ ~ 16˚
0˚
1st Upper Sidelobe Suppression
≥ 16dB
≥ 16dB
Front-to-Back Ratio
≥ 27dB
≥ 27dB
Polarization Type
Boresight
Cross –Polar
Discrimination
±45˚
Dual, Slant
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Between Ports
~ 10˚
Dual, Slant
±45˚
≥ 15dB
≥ 15dB
≥ 10dB
≥ 10dB
500W
300W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 30dB
≥ 30dB
Isolation
Between Bands
≥ 35dB (698~894MHz // 1710~2170MHz)
≤ -150dBc (@2x43dBm)
Passive Intermodulation, IM3
Antenna Control Interface
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 300mm x 150mm (48.0” x 11.8” x 6.0”)
Weight without Clamp
16.5kg (36.4lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
561.2N / 280.6N / 561.2N (126.2lbf / 63.1lbf / 126.2lbf)
Connector (Type / Position)
4 x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
95
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
698~894MHz, X-pol., H65 ˚ / V12˚, ET2~16˚
1710~2170MHz, X-pol., H65˚ / V7˚, ET0~10˚
E
D
T
A
D
u
a
l
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-CH-65-16-65-17-iR
Frequency Band
698~894MHz
Frequency Range
3dB
Beam-Width
1710~2170MHz
698~824MHz
824~ 894MHz
1710~1990MHz
1920~ 2170MHz
68˚
63˚
67˚
62˚
13.0˚
12.0˚
7.3˚
6.7˚
15.3 / 13.2
16.0 / 13.9
17.0 / 14.9
17.5 / 15.4
Horizontal
Vertical
Gain (dBi /dBd)
Electrical Down Tilt Range
2˚ ~ 16˚
0˚
1st Upper Sidelobe Suppression
≥ 16dB
≥ 16dB
Front-to-Back Ratio
≥ 27dB
≥ 27dB
Polarization Type
Boresight
Cross –Polar
Discrimination
±45˚
Dual, Slant
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Between Ports
~ 10˚
Dual, Slant
±45˚
≥ 15dB
≥ 15dB
≥ 10dB
≥ 10dB
500W
300W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 30dB
≥ 30dB
Isolation
Between Bands
≥ 35dB (698~894MHz // 1710~2170MHz)
Passive Intermodulation, IM3
Antenna Control Interface
≤ -150dBc (@2x43dBm)
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 300mm x 150mm (72.0” x 11.8” x 6.0”)
Weight without Clamp
22.0kg (48.5lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
842N / 421N / 842N (189.4lbf / 94.7lbf / 189.4lbf)
Connector (Type / Position)
4 x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
96
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
790~960MHz, X-pol., H65 ˚ / V16.5˚, ET0~14˚
1710~2170MHz, X-pol., H65˚ / V8˚, ET0~10˚
E
D
T
A
D
u
a
l
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-GH-65-14-65-17-iR
Frequency Band
790~960MHz
Frequency Range
3dB
Beam-Width
1710~2170MHz
790~894MHz
880~ 960MHz
1710~1990MHz
1920~ 2170MHz
68˚
63˚
67˚
62˚
17.0˚
16.0˚
8.2˚
7.5˚
14.5 / 12.4
15.0 / 12.9
16.1 / 14.0
16.5 / 14.4
Horizontal
Vertical
Gain (dBi /dBd)
Electrical Down Tilt Range
0˚ ~ 14˚
0˚
1st Upper Sidelobe Suppression
≥ 16dB
≥ 16dB
Front-to-Back Ratio
≥ 25dB
≥ 30dB
Polarization Type
Boresight
Cross –Polar
Discrimination
±45˚
Dual, Slant
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Between Ports
~ 10˚
Dual, Slant
±45˚
≥ 15dB
≥ 15dB
≥ 10dB
≥ 10dB
350W
250W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 30dB
≥ 30dB
Isolation
Between Bands
≥ 35dB (790~960MHz // 1710~2170MHz)
Passive Intermodulation, IM3
Antenna Control Interface
≤ -150dBc (@2x43dBm)
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 300mm x 150mm (48.0” x 11.8” x 6.0”)
Weight without Clamp
15.5kg (34.2lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
561.2N / 280.6N / 561.2N (126.2lbf / 63.1lbf / 126.2lbf)
Connector (Type / Position)
4 x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
97
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
790~960MHz, X-pol., H65 ˚ / V11˚, ET0~14˚
1710~2170MHz, X-pol., H65˚ / V7˚, ET0~10˚
E
D
T
A
D
u
a
l
A
n
te
n
n
a
Electrical Specification
Product Number
ET-X-GH-65-16-65-18-iR
Frequency Band
790~960MHz
Frequency Range
3dB
Beam-Width
1710~2170MHz
790~894MHz
880~ 960MHz
1710~1990MHz
1920~ 2170MHz
68˚
63˚
67˚
62˚
12.0˚
11.0˚
7.3˚
6.7˚
16.0 / 13.9
16.5 / 13.4
17.0 / 14.9
17.5 / 15.4
Horizontal
Vertical
Gain (dBi /dBd)
Electrical Down Tilt Range
0˚ ~ 14˚
0˚
1st Upper Sidelobe Suppression
≥ 16dB
≥ 16dB
Front-to-Back Ratio
≥ 25dB
≥ 30dB
Polarization Type
Boresight
Cross –Polar
Discrimination
±45˚
Dual, Slant
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Between Ports
~ 10˚
Dual, Slant
±45˚
≥ 15dB
≥ 15dB
≥ 10dB
≥ 10dB
350W
250W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 30dB
≥ 30dB
Isolation
Between Bands
≥ 35dB (790~960MHz // 1710~2170MHz)
Passive Intermodulation, IM3
Antenna Control Interface
≤ -150dBc (@2x43dBm)
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 300mm x 150mm (72.0” x 11.8” x 6.0”)
Weight without Clamp
21.0kg (46.4lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
842N / 421N / 842N (189.4lbf / 94.7lbf / 189.4lbf)
Connector (Type / Position)
4 x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
98
E DTA Triple A ntenna
Product List
Model No.
ET-X-TC-65-14-65-17-IR
Frequency
698~894/
Pol.
XXX-pol.
HPBW
(degree)
Gain
(dBi)
Tilt
(degree)
65/65
14/17
0~10
RET
iRET
E
D
T
A
T
r
i
p
l
e
Page
100
A
n
te
n
n
a
2X(1710~2170)
ET-X-TC-65-16-65-17-IR
698~894/
XXX-pol.
65/65
16/17
0~10
iRET
101
XXX-pol.
65/65
15/17
0~10
iRET
102
XXX-pol.
65/65
16/17
0~10
iRET
103
2X(1710~2170)
ET-X-TG-65-15-65-17-IR
790~960/
2X(1710~2170)
ET-X-TG-65-16-65-17-IR
790~960/
2X(1710~2170)
Notice;
1. In case of Knob-RET, RET can be interconnected later by separate purchasing.
2. In case of IRET or iCBT, iRET or iCBT is embedded on Antenna.
99
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
698~894MHz, XXX-pol., H65 ˚ / V17˚, ET2~16˚
2 x (1710~2170MHz, XXX-pol., H65 ˚ / V7˚, ET0~10˚
Electrical Specification
Product Number
ET-X-TC-65-14-65-17-iR
Frequency Band
698~894MHz
Frequency Range
3dB
Beam-Width
2 x (1710~2170MHz)
698~ 824MHz
806~894MHz
1710~1990MHz
1920~ 2170MHz
68˚
63˚
67˚
62˚
17.5˚
17.0˚
7.5˚
7.0˚
13.8 / 11.7
14.5 / 12.4
16.5 / 14.4
17.0 / 14.9
Horizontal
Vertical
Gain (dBi /dBd)
Electrical Down Tilt Range
2˚ ~ 16˚
0˚
1st Upper Sidelobe Suppression
≥ 16dB
≥ 16dB
Front-to-Back Ratio
≥ 25dB
≥ 30dB
Polarization Type
Dual, Slant
Boresight
Cross –Polar
Discrimination
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Between Ports
±45˚
~ 10˚
Dual, Slant
±45˚
≥ 18dB
≥ 15dB
≥ 10dB
≥ 7dB
350W
250W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 27dB
≥ 27dB
Isolation
Between Bands
≥ 35dB (698~894MHz // 1710~2170MHz)
Passive Intermodulation, IM3
Antenna Control Interface
≤ -150dBc (@2x43dBm)
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 460mm x 180mm (48.0” x 18.1” x 7.1”)
Weight without Clamp
22.5kg (49.7lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
859.8N / 859.8N / 859.8N (193.0lbf / 193.0lbf / 193.0lbf)
Connector (Type / Position)
6x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
100
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
698~894MHz, XXX-pol., H65 ˚ / V11˚, ET2~16˚
2 x (1710~2170MHz, XXX-pol., H65 ˚ / V7˚, ET0~10˚
Electrical Specification
Product Number
ET-X-TC-65-14-65-17-iR
Frequency Band
698~894MHz
Frequency Range
3dB
Beam-Width
2 x (1710~2170MHz)
698~ 824MHz
806~894MHz
1710~1990MHz
1920~ 2170MHz
68˚
63˚
67˚
62˚
11.5˚
11.0˚
7.0˚
6.5˚
15.3 / 13.2
16.0 / 13.9
17.0 / 14.9
17.5 / 15.4
Horizontal
Vertical
Gain (dBi /dBd)
Electrical Down Tilt Range
2˚ ~ 16˚
0˚
1st Upper Sidelobe Suppression
≥ 16dB
≥ 16dB
Front-to-Back Ratio
≥ 25dB
≥ 30dB
Polarization Type
Boresight
Cross –Polar
Discrimination
±45˚
Dual, Slant
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Between Ports
~ 10˚
Dual, Slant
±45˚
≥ 18dB
≥ 15dB
≥ 10dB
≥ 7dB
350W
250W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 27dB
≥ 27dB
Isolation
Between Bands
≥ 35dB (698~894MHz // 1710~2170MHz)
Passive Intermodulation, IM3
Antenna Control Interface
≤ -150dBc (@2x43dBm)
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 460mm x 180mm (72.0” x 18.1” x 7.1”)
Weight without Clamp
29.2kg (64.5lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
1289.7N / 1289.7N / 1289.7N (289.5lbf / 289.5lbf / 289.5lbff)
Connector (Type / Position)
6 x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
101
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
790~960MHz, XXX-pol., H65 ˚ / V17˚, ET2~16˚
2 x (1710~2170MHz, XXX-pol., H65 ˚ / V7˚, ET0~10˚
Electrical Specification
Product Number
ET-X-TG-65-15-65-17-iR-
Frequency Band
790~960MHz
Frequency Range
3dB
Beam-Width
2 x (1710~2170MHz)
790~ 894MHz
870~960MHz
1710~1990MHz
1920~ 2170MHz
66˚
62˚
67˚
62˚
17.0˚
16.5˚
7.5˚
7.0˚
14.1 / 12.0
14.7 / 12.6
16.5 / 14.4
17.0 / 14.9
Horizontal
Vertical
Gain (dBi /dBd)
Electrical Down Tilt Range
2˚ ~ 16˚
0˚
1st Upper Sidelobe Suppression
≥ 15dB
≥ 15dB
Front-to-Back Ratio
≥ 25dB
≥ 30dB
Polarization Type
Boresight
Cross –Polar
Discrimination
±45˚
Dual, Slant
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Between Ports
~ 10˚
Dual, Slant
±45˚
≥ 18dB
≥ 15dB
≥ 10dB
≥ 7dB
350W
250W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 27dB
≥ 27dB
Isolation
Between Bands
≥ 35dB (790~960MHz // 1710~2170MHz)
Passive Intermodulation, IM3
Antenna Control Interface
≤ -150dBc (@2x43dBm)
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 460mm x 180mm (48.0” x 18.1” x 7.1”)
Weight without Clamp
22.5kg (49.7lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
859.8N / 859.8N / 859.8N (193.0lbf / 193.0lbf / 193.0lbf)
Connector (Type / Position)
6 x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
102
EDTA (Electrical Down Tilt Antenna)
Field Replacement Internal RET
790~960MHz, XXX-pol., H65 ˚ / V11˚, ET2~16˚
2 x (1710~2170MHz, XXX-pol., H65 ˚ / V7˚, ET0~10˚
Electrical Specification
Product Number
ET-X-TG-65-15-65-17-iR
Frequency Band
790~960MHz
Frequency Range
3dB
Beam-Width
2 x (1710~2170MHz)
790~ 894MHz
870~960MHz
1710~1990MHz
1920~ 2170MHz
66˚
62˚
67˚
62˚
11.0˚
10.5˚
7.0˚
6.5˚
16.0 / 12.0
16.3 / 13.2
17.0 / 14.9
17.5 / 15.4
Horizontal
Vertical
Gain (dBi /dBd)
Electrical Down Tilt Range
2˚ ~ 16˚
0˚
1st Upper Sidelobe Suppression
≥ 14dB
≥ 15dB
Front-to-Back Ratio
≥ 25dB
≥ 30dB
Polarization Type
Boresight
Cross –Polar
Discrimination
±45˚
Dual, Slant
60
Input Maximum CW Power
Impedance
VSWR (Return Loss)
Between Ports
~ 10˚
Dual, Slant
±45˚
≥ 18dB
≥ 15dB
≥ 10dB
≥ 7dB
350W
250W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 27dB
≥ 27dB
Isolation
Between Bands
≥ 35dB (790~960MHz // 1710~2170MHz)
Passive Intermodulation, IM3
Antenna Control Interface
≤ -150dBc (@2x43dBm)
Field Replaceable Internal RET, AISG1.1 or AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 460mm x 180mm (72.0” x 18.1” x 7.1”)
Weight without Clamp
29.2kg (64.5lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
1289.7N / 1289.7N / 1289.7N (289.5lbf / 289.5lbf / 289.5lbf)
Connector (Type / Position)
6 x 7/16” DIN(Female) / Bottom
1710~2170MHz
698~894MHz
Horizontal Pattern
Vertical Pattern
Horizontal Pattern
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
103
DualPhase™ A ntenna
Product List
Model No.
Frequency
Pol.
HPBW
(degree)
Gain
(dBi)
Tilt
(degree)
RET
H2-X-GW-65-15-iC
790~960
X-pol.
65
15
0~14 +/- 30
iCBT
105
H2-X-GW-65-16-iC
790~960
X-pol.
65
16
0~8 +/- 30
iCBT
106
H2-X-HB-33-19-iC
1710~2170
X-pol.
33
19
0~10 +/- 30
iCBT
107
H2-X-HB-33-23-iC
1710~2170
X-pol.
33
23
0~4 +/- 30
iCBT
108
H2-X-HB-45-18-iC
1710~2170
X-pol.
45
18
0~10 +/- 30
iCBT
109
H2-X-HB-65-17-iC
1710~2170
X-pol.
65
17
0~10 +/- 30
iCBT
110
H2-X-HB-65-19-iC
1710~2170
X-pol.
65
19
0~6 +/- 30
iCBT
111
H2-X-HB-90-16-iC
1710~2170
X-pol.
90
16
0~10 +/- 30
iCBT
112
H2-Q-HB-65-17-iC
1710~2170
XX-pol.
65
17
0~10 +/- 30
iCBT
113
H2-Q-HB-65-19-iC
1710~2170
XX-pol.
65
19
0~6 +/- 30
iCBT
114
H2-X-WL-65-14-iR
2300~2690
X-pol.
65
14
0~10 +/- 30
iRET
115
H2-X-WL-65-17-iR
2300~2690
X-pol.
65
17
0~10 +/- 30
iRET
116
D
u
a
lP
h
a
s
e
Page
™
A
n
te
n
n
a
Notice;
1. In case of Knob-RET, RET can be interconnected later by separate purchasing.
2. In case of IRET or iCBT, iRET or iCBT is embedded on Antenna.
104
DualPhase™ Antenna (Hybrid 2-way Antenna)
Electrical Down Tilt & Azimuth Steering, Field Replacement Internal RET/CBT
790~960MHz, X-pol., H65˚ / V15.5˚, ET0~14˚ , AS -30˚ ~ +30˚
D
u
a
lP
h
a
s
e
Electrical Specification
Product Number
H2-X-GW-65-15-iC
Frequency Range
790~960MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
A
n
te
n
n
a
65˚
15.5˚
14.0 / 11.9
Electrical Down Tilt Range
Azimuth Steering Range
0˚ ~ 14˚
-30˚ ~ +30˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
™
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
±45˚
≥ 18dB
≥10dB
350W
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET/CBT , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1370mm x 256mm (53.9” x 10.1”)
Weight without Clamp
14.0kg (30.9lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
358.9N / 358.9N / 358.9N (80.7lbf / 80.7lbf / 80.7lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
105
DualPhase™ Antenna (Hybrid 2-way Antenna)
Electrical Down Tilt & Azimuth Steering, Field Replacement Internal RET/CBT
790~960MHz, X-pol., H65˚ / V9.5˚, ET0~8˚ , AS -30˚ ~ +30˚
D
u
a
lP
h
a
s
e
Electrical Specification
Product Number
H2-X-GW-65-16-iC
Frequency Range
790~960MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
9.5˚
Gain (dBi /dBd)
A
n
te
n
n
a
16.5 / 14.4
Electrical Down Tilt Range
Azimuth Steering Range
0˚ ~ 8˚
-30˚ ~ +30˚
1st Upper Sidelobe Suppression
≥ 15dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
™
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
±45˚
≥ 18dB
≥10dB
350W
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET/CBT , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
2020mm x 256mm (79.5” x 10.1”)
Weight without Clamp
22.0kg (41.9lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
529.1N / 529.1N / 529.1N (119.0lbf / 119.0lbf / 119.0lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
106
DualPhase™ Antenna (Hybrid 2-way Antenna)
Electrical Down Tilt & Azimuth Steering, Field Replacement Internal RET/CBT
1710~2170MHz, X-pol., H33˚ / V8˚, ET0~10˚ , AS -30˚ ~ +30˚
D
u
a
lP
h
a
s
e
Electrical Specification
Product Number
H2-X-HB-33-19-iC
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
33˚
Vertical
8.0˚
Gain (dBi /dBd)
A
n
te
n
n
a
19.0 / 16.9
Electrical Down Tilt Range
Azimuth Steering Range
0˚ ~ 10˚
-30˚ ~ +30˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 30dB
Polarization Type
Cross –Polar
Discrimination
™
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
±45˚
≥ 18dB
≥10dB
250W
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET/CBT , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 256mm (48.0” x 10.1”)
Weight without Clamp
14.0kg (30.8lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
479N / 479N / 479N (107.7lbf / 107.7lbf / 107.7lbf)
2x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
107
DualPhase™ Antenna (Hybrid 2-way Antenna)
Electrical Down Tilt & Azimuth Steering, Field Replacement Internal RET/CBT
1710~2170MHz, X-pol., H33 ˚ / V4.2˚, ET0~4˚ , AS -30˚ ~ +30˚
D
u
a
lP
h
a
s
e
Electrical Specification
Product Number
H2-X-HB-33-23-iC
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
33˚
Vertical
4.2˚
Gain (dBi /dBd)
A
n
te
n
n
a
22.5 / 20.4
Electrical Down Tilt Range
Azimuth Steering Range
0˚ ~ 4˚
-30˚ ~ +30˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 30dB
Polarization Type
Cross –Polar
Discrimination
™
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
±45˚
≥ 18dB
≥10dB
250W
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET/CBT , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
2131mm x 256mm (83.9” x 10.1”)
Weight without Clamp
20.0kg (44.1lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
558.1N / 558.1N / 558.1N (125.5lbf / 125.5lbf / 125.5lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
108
DualPhase™ Antenna (Hybrid 2-way Antenna)
Electrical Down Tilt & Azimuth Steering, Field Replacement Internal RET/CBT
1710~2170MHz, X-pol., H45˚ / V8˚, ET0~10˚ , AS -30˚ ~ +30˚
D
u
a
lP
h
a
s
e
Electrical Specification
Product Number
H2-X-HB-45-18-iC
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
45˚
Vertical
8.0˚
Gain (dBi /dBd)
A
n
te
n
n
a
17.8 / 15.7
Electrical Down Tilt Range
Azimuth Steering Range
0˚ ~ 10˚
-30˚ ~ +30˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 30dB
Polarization Type
Cross –Polar
Discrimination
™
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
±45˚
≥ 18dB
≥10dB
250W
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET/CBT , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 256mm (48.0” x 10.1”)
Weight without Clamp
13.5kg (29.8lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
479N / 479N / 479N (107.7lbf / 107.7lbf / 107.7lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
109
DualPhase™ Antenna (Hybrid 2-way Antenna)
Electrical Down Tilt & Azimuth Steering, Field Replacement Internal RET/CBT
1710~2170MHz, X-pol., H65˚ / V8˚, ET0~10˚ , AS -30˚ ~ +30˚
D
u
a
lP
h
a
s
e
Electrical Specification
Product Number
H2-X-HB-65-17-iC
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
8.0˚
Gain (dBi /dBd)
A
n
te
n
n
a
17.0 / 14.9
Electrical Down Tilt Range
Azimuth Steering Range
0˚ ~ 10˚
-30˚ ~ +30˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 30dB
Polarization Type
Cross –Polar
Discrimination
™
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
±45˚
≥ 18dB
≥10dB
250W
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET/CBT , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 156mm (48.0” x 6.1”)
Weight without Clamp
10.0kg (22.2lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
194N / 194N / 194N (43.0lbf / 43.0lbf / 43.0lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
110
DualPhase™ Antenna (Hybrid 2-way Antenna)
Electrical Down Tilt & Azimuth Steering, Field Replacement Internal RET/CBT
1710~2170MHz, X-pol., H65 ˚ / V5˚, ET0~6˚ , AS -30˚ ~ +30˚
D
u
a
lP
h
a
s
e
Electrical Specification
Product Number
H2-X-HB-65-19-iC
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
5.0˚
Gain (dBi /dBd)
A
n
te
n
n
a
18.5 / 16.4
Electrical Down Tilt Range
Azimuth Steering Range
0˚ ~ 6˚
-30˚ ~ +30˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 30dB
Polarization Type
Cross –Polar
Discrimination
™
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
±45˚
≥ 18dB
≥10dB
250W
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET/CBT , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 156mm (72.0” x 6.1”)
Weight without Clamp
13.0kg (26.6lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
291.9N / 291.1N / 291.1N (65.6lbf / 65.6lbf / 65.6lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
111
DualPhase™ Antenna (Hybrid 2-way Antenna)
Electrical Down Tilt & Azimuth Steering, Field Replacement Internal RET/CBT
1710~2170MHz, X-pol., H90˚ / V8˚, ET0~10˚ , AS -30˚ ~ +30˚
D
u
a
lP
h
a
s
e
Electrical Specification
Product Number
H2-X-HB-90-16-iC
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
90˚
Vertical
8.0˚
Gain (dBi /dBd)
A
n
te
n
n
a
16.0 / 13.9
Electrical Down Tilt Range
Azimuth Steering Range
0˚ ~ 10˚
-30˚ ~ +30˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 23dB
Polarization Type
Cross –Polar
Discrimination
™
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
±45˚
≥ 15dB
≥10dB
250W
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET/CBT , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 156mm (48.0” x 6.1”)
Weight without Clamp
10.0kg (22.2lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
194N / 194N / 194N (43lbf / 43lbf / 43lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
112
DualPhase™ Antenna (Hybrid 2-way Antenna)
Electrical Down Tilt & Horizontal Steering, Field Replacement Internal RET/CBT
1710~2170MHz, XX-pol., H65˚ / V8˚, ET0~10˚ , AS -30˚ ~ +30˚
D
u
a
lP
h
a
s
e
Electrical Specification
Product Number
H2-Q-HB-65-17-iC
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
8.0˚
Gain (dBi /dBd)
A
n
te
n
n
a
17.0 / 14.9
Electrical Down Tilt Range
Azimuth Steering Range
0˚ ~ 10˚
-30˚ ~ +30˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
™
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
±45˚
≥ 15dB
≥8dB
250W
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET/CBT , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1219mm x 256mm (48.0” x 10.1”)
Weight without Clamp
15.0kg (33.1lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
319.2N / 319.2N / 319.2N (71.8lbf / 71.8lbf / 71.8lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
113
DualPhase™ Antenna (Hybrid 2-way Antenna)
Electrical Down Tilt & Horizontal Steering, Field Replacement Internal RET/CBT
1710~2170MHz, XX-pol., H65 ˚ / V5˚, ET0~6˚ , AS -30˚ ~ +30˚
D
u
a
lP
h
a
s
e
Electrical Specification
Product Number
H2-Q-HB-65-19-iC
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
5.0˚
Gain (dBi /dBd)
A
n
te
n
n
a
18.5 / 16.4
Electrical Down Tilt Range
Azimuth Steering Range
0˚ ~ 6˚
-30˚ ~ +30˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
™
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
±45˚
≥ 15dB
≥8dB
250W
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.4:1 (≥ 15.6dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET/CBT , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1829mm x 256mm (72.0” x 10.1”)
Weight without Clamp
19.0kg (41.9lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
479N / 479.2N / 479.2N (107.7lbf / 107.7lbf / 107.7lbf)
4 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
114
DualPhase™ Antenna (Hybrid 2-way Antenna)
Electrical Down Tilt & Azimuth Steering, Field Replacement Internal RET
2300~2690MHz, X-pol., H65 ˚ / V14.5˚, ET0~10˚ , AS -30˚ ~ +30˚
D
u
a
lP
h
a
s
e
Electrical Specification
Product Number
H2-X-WL-65-14-iR
Frequency Range
2300~2690MHz
Horizontal
3dB
Beam-Width
Vertical
Gain (dBi /dBd)
A
n
te
n
n
a
65˚
14.5˚
14.0 / 11.9
Electrical Down Tilt Range
Azimuth Steering Range
0˚ ~ 10˚
-30˚ ~ +30˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
™
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
±45˚
≥ 18dB
≥8dB
200W
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14.0dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET, AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
609mm x 156mm (24.0” x 6.1”)
6.0kg (13.2lbs)
60m/s (135mph)
97.2N / 97.2N / 97.2N (21.9lbf / 21.9lbf / 21.9lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
115
DualPhase™ Antenna (Hybrid 2-way Antenna)
Electrical Down Tilt & Azimuth Steering, Field Replacement Internal RET
2300~2690MHz, X-pol., H65˚ / V7˚, ET0~10˚ , AS -30˚ ~ +30˚
D
u
a
lP
h
a
s
e
Electrical Specification
Product Number
H2-X-WL-65-17-iR
Frequency Range
2300~2690MHz
3dB
Beam-Width
Horizontal
65˚
Vertical
7.0˚
Gain (dBi /dBd)
A
n
te
n
n
a
17.2 / 15.1
Electrical Down Tilt Range
Azimuth Steering Range
0˚ ~ 10˚
-30˚ ~ +30˚
1st Upper Sidelobe Suppression
≥ 18dB
Front-to-Back Ratio
≥ 25dB
Polarization Type
Cross –Polar
Discrimination
™
Dual, Slant
Boresight
60
Input Maximum CW Power
Impedance
±45˚
≥ 18dB
≥ 8dB
200W
50Ω
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
≤1.5:1 (≥ 14.0dB)
≥ 30dB
≤ -150dBc (@2x43dBm)
Field Replacement Internal RET , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
Weight without Clamp
Max. Wind Speed
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Horizontal Pattern
1219mm x 156mm (48.0” x 6.1”)
9.5kg (20.9lbs)
60m/s (135mph)
194.6N / 194.6N / 194.6N (43.8lbf / 43.8lbf / 43.8lbf)
2 x 7/16” DIN(Female) / Bottom
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
116
TriPhase™ A ntenna
Product List
Model No.
H3-X-HB-45-19-iC
Frequency
Pol.
HPBW
(degree)
Gain (dBi)
Tilt
(degree)
RET
1710~2170
X-pol.
45~90
19~14.5
0~8 +/-30
iCBT
T
r
iP
h
a
s
e
Page
118
™
A
n
te
n
n
a
Notice;
1. In case of Knob-RET, RET can be interconnected later by separate purchasing.
2. In case of IRET or iCBT, iRET or iCBT is embedded on Antenna.
117
TriPhase™ Antenna (Hybrid 3-way Antenna)
Electrical Down Tilt & Azimuth Steering & Azimuth Beamwidth, Field Replaceable Internal RET/CBT
1710~2170MHz, X-pol., ET0~8 ˚ , AS -30˚~+30˚ , AB 45˚~90˚
T
r
iP
h
a
s
e
Electrical Specification
Product Number
H3-X-HB-45-19-iC
Frequency Range
1710~2170MHz
3dB
Beam-Width
Horizontal
Vertical
Gain
Electrical Down Tilt Range
Azimuth Steering Range
7.0˚
19.0dBi (@45˚) ~ 14.5dBi (@90˚)
0˚ ~ 8˚
-30˚ ~ +30˚
≥ 14dB
Front-to-Back Ratio
≥ 25dB
Dual, Slant
±45˚
Cross –Polar Discrimination
≥ 15dB
Input Maximum CW Power
250W
Impedance
VSWR (Return Loss)
Isolation Between Ports
Passive Inter-modulation, IM3
Antenna Control Interface
A
n
te
n
n
a
45˚ ~ 90˚
1st Upper Sidelobe Suppression
Polarization Type
™
50Ω
≤1.5:1 (≥ 14.0dB)
≥ 27dB
≤ -140dBc (@2x43dBm)
Field Replacement Internal RET/CBT , AISG2.0
Mechanical Specification
Dimension
(Length x Width x Depth)
1705mm x 206mm (67.1” x 8.1”)
Weight without Clamp
15.0kg (33.1lbs)
Max. Wind Speed
60m/s (135mph)
Wind Load (@100mph),
Front / Side / Rear
Connector (Type / Position)
Azimuth Beamwidth (45˚ ~ 90˚)
359.3N / 359.3N / 359.3N (80.8lbf / 80.8lbf / 80.8lbf)
2 x 7/16” DIN(Female) / Bottom
Azimuth Steering (@45˚)
Vertical Pattern
Specifications are subject to change without notice. 20 Aug. 2010
118
S olution Antenna
Product List
Model No.
LNA +
Discrption
TMA Integrated Antenna
Page
S
o
l
u
ti
o
n
A
n
te
n
n
a
120
2496~2690MHz
TMA Integrated Antenna
121
Tx : 2110~2170MHz Rx : 1920~1980MHz
EyeOntenna
Network Camera with H2 Antenna
122
119
Distributed TMA Integrated Antenna
2496~2690MHz
• Wi-MAX TMA Distributed Antenna System
• High SNR is essential in spectral efficiency
• Better SNR providing higher throughput to subscriber
• Recent demands for uplink high speed data
• Reduced capex by increasing coverage area
• Easy site acquisition and simple construction
• Saving installation cost by no RF jumper cables
Technical Specification
Frequency
Antenna Gain
ANT Type
Rx LNA Gain
Noise Figure
Improvement
Rx Gain Control
OIP3
Bypass Loss
(TDD Module)
Dimensions
Weight
2496 ~ 2690MHz
17.5dBi
Hybrid 2 Way
14.0
1dB
1.6dB, max(H2 ANT ref.)
Vertical Pattern , Tilt 2°
0 ~ 12dB (1.0dB Step)
+25dBm, min
0.3dB, max
Ø156 x 1219mm
16.0Kg , max.
Horizontal Steering, ±30°
120
Distributed TMA Integrated Antenna
Tx : 2110~2170MHz Rx : 1920~1980MHz
• FDD for TMA Distributed Antenna System
• High SNR is essential in spectral efficiency
• Better SNR providing higher throughput to subscriber
• Recent demands for uplink high speed data
• Reduced capex by increasing coverage area
• Easy site acquisition and simple construction
• Saving installation cost by no RF jumper cables
Technical Specification
Frequency
Antenna Gain
ANT Type
Rx LNA Gain
Noise Figure
Improvement
Tx Freq : 2110 ~ 2170MHz
Rx Freq : 1920 ~ 1980MHz
17.0dBi
Hybrid 2 Way
13.0
1dB
Vertical Pattern , Tilt 2°
1.6dB, max(H2 ANT ref.)
PIM
150dBc
OIP3
+25dBm, min
Rx Bypass Loss
Dimensions
Weight
1.8dB, max
Ø186 x 1560mm
23.0Kg , max.
Horizontal Steering, ±30°
121
Eyeontenna
Imbedded Network Camera onto DualPhase ™ Antenna

Imbedded Camera Module into BTS and Repeater Antenna
Provides various video information(weather, traffic, accident, education, leisure, etc.)
Obtaining a good view site by using the advantage of Antenna’s installation.

Easy Power Supplying and Control Signal Transmitting
Simple Structure
Uses the existing power to control the antenna

Cost Efficient Installation
Does not need additional installation

Infra Network Applications
• Government, Public Office
• National Emergency Management Agency
• Police Station
• Firehouse
• Military
• Road & Traffic
• Weather Forecast
• Broadcast, Press
• Contents, service for Subscriber like Google
Specifications are subject to change without notice. 20 Aug. 2010
122
Fullerton, CA. Office
1521 E. Orangethorpe Ave.
Suite A Fullerton,
CA 92831 USA
65 Youngchun-ri, Dongtan-myun,
Hwasung-si, Kyungki-do, 445-813
Republic of Korea,
Frisco TX Office
2601 Network Blvd Suite 400
Frisco TX, 75034 USA
Tel : +82 10 370 0353
Email : sales@kmw.co.kr
http://www.kmw.co.kr
Tel : (714) 515 1100
Email : info@kmwcomm.com
http://www.kmwcomm.com
I’s Bid 7F, Shinyokohama 3-18-5,
Kouhoku, Yokohama-si, Kanagawa-ken,
Japan (222-0033)
No. 38 South Tuanjie Road Hi-Tech
Zone of Xi’an Xi’an city, Shaanxi
Province P.R China
Ludwig-Erhard-Stresse 30-40,
65760 Eschborn, Germany
Tel : +81 45 478 2202
Email : info@kmwinc.co.jp
http://kmwinc.co.jp
Tel : +86 29 8838 4888
Email : hanque1@htctelecom.com
http://htctelecom.com
Tel : +49 6196 998 7751
Email : sales@kmw.co.kr
http://www.kmwcomm.com