Arrow UP State Bogey _ Setting State 1 – - – X-band - – – Yes 2 – - – K-band - – - Yes 3 – - – Ka-band - - - Yes 4 – - – Laser - – - – Yes 5 -- Ka INTENSITY – - No © Valentine Research Inc. - 1991 Programming Cheat – Sheet Most Versions If the character isn’t there, neither is the feature All Descriptions in the left column are Increased Ramping on Weaker Signals 6 -- Ka False Guard – - Yes Reduces Ka falses - Decreases Ka reaction time 7 -- K-band autoMUTE - No Arrow UP enables b-C-d-E-F-G (only when in ‘logic’ modes) 8 – Mute Button is Silence -- -- -- No A – Bogey Lock at Muted Volume -- No b K-band C auto-Mute → → → → d [Times] *K-band autoMute OverRides * E – Instant On Awareness -- - Yes For more complete information Navigate to http://valentineone.com/Lab/TechReport3.asp Mute Times for K-band autoMuting (enabled by setting 7 to DOWN) ☞ ONSET Signal over 4 LEDs alert at FULL Volume F – Constant On Awareness -- Yes When weak signal increases to 6 LEDs alert jumps to FULL Volume G – Rear K Muting – – No L-mode = Muted Volume ~ AL-mode = Silence ~ Does Not UN-mute H - - Ku-band -- -- -- -- – No J --- POP Sensitivity -- -- Yes Increase K-band and Ka-33.8 scanning and alerting U -- Euro Mode -- -- -- – – No ū -- Euro X narrow band – -- – – No t – - TrafficSensingRadar Filtering - – - No Yes also Disables K-band POP sensitivity L - - Force Legacy data-stream – No Disables ESP device auto-sensing increase to Full Volume in [Time] [Time] - (measured in seconds) think of these as 2-position DIP-switches [Time] 10 30 20 15 7 5 4 3 b C d Up Down Up Down Up Down Up Down Up Up Down Down Up Up Down Down Up Up Up Up Down Down Down Down *E – Set to No (DOWN) Full strength I/O Blast is MUTED until [Time] *F – Set to No, Weak signals Increasing to Full Strength Do Not UN-mute until [Time] © Bad Attitude Productions - 2011