ELECTRONIC HOOTER, BUZZER, BELL & SIREN
INTRODUCTION
Alan Electronic Systems Pv t. Ltd. has introduced a series of Hi-tech Electronic Hooter/
Buzzer/ Bell/ Siren which are power ef ficient, having high audio output with three dif ferent
tones, selectable at site.
FEATURES
• Burden less than 15mA at nominal input
: 100dBA +/- 5%
• Audio Output
• Panel Cut out size : 92mm x 92mm
• Overall dimension : 96mm x 96mm x 60mm
: 230gms. (Approx.)
• Weight
: Three tone (Site selectable)
• No. of tones
HOOTER
INSTRUCTIONS FOR THE USER
1) Connect the input supply of respective Model at terminal 1 & 2 and 1 & 3 as per shown in
operating voltage range char t.
2) Af ter connecting the supply, if all the other terminals are kept open, Tone -I will be
available. If terminal no.5 & no.6 are shor ted Tone -II will be available, if terminal no.6 &
no. 7, are shor ted . Tone -III will be available, refer below given char t for tone.
3) Clamps supplied can be used for panel (flush) as well as base (wall ) mounting as
shown in below diagram.
CAUTION
1) Do not touch any terminal when the Hooter/Bell/ Buzzer & Siren is ON.
2) Do not shor t input terminals with any other terminals.
BUZZER
MOUNTING ARR ANGEMENT
Base / Wall Mounting Type
Flush / Panel Mounting Type
BACK TERMINAL WIRING DIAGR AM
CHART FOR TONE
BELL
Supply
Condition
ON
ON
ON
Terminal
No- 5 & 6
OPEN
SHORT
OPEN
Terminal
No- 6 & 7
OPEN
OPEN
SHORT
Tone
Available
TONE-1
TONE-2
TONE-3
Sr. No. Model
1.
2.
3.
4.
SIREN
5
5.
6.
AUH-1122
AUH-2448
AUH-01
AAH-03 (With Acknowledge
Push But ton on front side
SRH-1122-With Builtin Timer
SRH-2448-With Builtin Timer
1
2
3
V1
V2
4
5
6
7
Terminals for
Tone selection
Input Voltage between V1 Input Voltage between V2
80-140 VAC / DC
18-30 VAC / DC
18 to 285 VAC / DC
160-280 VAC/DC
36-60 VAC/DC
-
18 to 285 VAC / DC
-
80-140 VAC / DC
18-30 VAC / DC
160-280 VAC/DC
36-60 VAC/DC