Uniclass
L411
+L413:P7114
EPIC
D11
+D13:X725
CI/SfB
(31.4)+(31.5)
Xn6
9/11
Aluminium Systems
Specification Guide
A brand new design concept that delivers
unrivalled thermal performance
A BRAND OF THE VEKA UK GROUP
ARCHITECTURAL
A BRAND OF THE VEKA UK GROUP
A radical reinterpretation of the aluminium window
System10 Aluminium from Bowater Architectural, part of Bowater
Building Products Limited is a radical new design concept. It looks
like aluminium but at its heart is a specially designed substrate that
improves thermal and environmental performance beyond that normally
associated with aluminium.
This means System10 Aluminium can be specified where ordinary
aluminium windows cannot, including buildings required to meet the
most stringent thermal and ecological standards.
System10 Aluminium:
u
Provides a U-Value of 1.4W/m2K
when fitted with standard double
glazed units
u
Can be manufactured to provide a
U-Value as low as 0.7W/m2K
u
Meets the requirements of levels
3, 4, 5, and 6 of the Code for
Sustainable Homes.
A revolution with heritage
System10 Aluminium is a development of System10 PVC-U – the market leading commercial
window and door system from WHS Halo, a division of Bowater Building Products Limited.
System10 has been used to great success for over 25 years and is held in high regard by Local
Authorities, specifiers and homeowners alike.
Code for sustainable homes – meet Code level 6 now!
The Government has set a target that by 2016 (2013 for the social sector) all new homes will be
zero carbon rated (Code level 6). To achieve that level all windows have to have a U-value of
0.7W/m2K or less.
Aesthetics and performance
System10 Aluminium:
u Can be used to create large glazed areas and large opening sashes – in this respect it equals,
or betters pure aluminium framing systems
u Can be powder coated in any RAL colour – and the inside can be a different colour from the
outside or laminated to reproduce timber interior finishes
u Is more cost effective than thermally broken aluminium systems
u Can be manufactured to achieve a U-value as low as 0. 7W/m2K
u Standard U-value is 1.4W/m2K, and any value between 1.4W/m2K and 0.7W/m2K can be
achieved simply by varying standard components
u Has concealed gaskets for clean sightlines
u Has concealed drainage (wherever possible), no unsightly slots
u Accepts standard hardware that can be easily maintained
Meeting the standard
System10 Aluminium has been fully tested and shown they meet the following standards:
u BS 7950
u PAS23 and PAS24
u BS 8213
Exceptional performance – the result of exceptional design
System10 Aluminium’s ability to deliver such exceptional performance is the result from a
combination of unique design concepts. They include:
u A specially designed, multi-chamber substrate that all but eliminates cold bridging.
u Foam filled inserts that further improve the insulating properties of the substrate
u Specially designed seals that prevent heat loss around glazed units and between the sash and
the frame
The most cost effective
The table below compares the costs and performance of a number of window systems. It shows that
System10 Aluminium costs considerably less than other systems, and yet provides better all-round
performance and design opportunities.
COST EFFICIENCY FRAME COMPARISON
Frame Type
System10 Aluminium
Softwood
70
105mm
136mm
95mm
36mm Triple Krypton
44mm Triple Argon
44mm Triple Argon
36mm Triple Krypton
0.74
0.73
0.74
0.66
6
Zero Carbon
6
Zero Carbon
6
Zero Carbon
6
Zero Carbon
100
112
114
114
Av. frame depth
Glazing
Av. frame U-value
Code for Sustainable
Homes (level achieved)
Performance Price index*
Aluminium/PVC-U Aluminium/softwood
FRAME SUMMARY
Frame Type
†
††
System10 PVC-U
System10 Aluminium
Timber
70mm
70mm
87mm
54mm
Av. frame U-value
1.30
1.40
1.43
1.93
Code for Sustainable
Homes (level achieved)
3&4
3&4
3&4
NOT COMPLIANT
100
169
218
350
Av. frame depth
Performance Price index*
Aluminium
*The performance/price index is calculated by multiplying the price of a standard window by the U-value achieved by the system. The best result,
i.e. the lowest answer, is then set to 100 and the other indices calculated accordingly.
†
Average of 8 frames (min. 68mm - max. 115mm)
††
Average of 20 frames (min. 47mm - max. 75mm)
Casement Windows
The System10 Aluminium open out casement is
a high performance window which, because of
its ingenious design enables aluminium framed
windows to be specified for buildings designed
to meet the Code for Sustainable Homes. It
features slim, bevelled sightlines and a 70mm
front to back dimension. Opening sashes may
be top hung or side hung.
Maximum Sizes
Standard - internal beaded casement sash double glazed
Side hung
700mm (w) x 1300mm (h) 12” friction stay with 21kg weight carrying capacity
Top hung
1250mm (w) x 1250mm (h) 24” friction stay with 26kg weight carrying capacity
Smart - internal beaded casement sash double glazed
Side hung 1100mm (w) x 2100mm (h) butt hinges or dedicated stay arms with 80kg weight carrying capacity
Top hung 1500mm (w) x 1700mm (h) butt hinges or dedicated stay arms with 80kg weight carrying capacity
Smart - internal beaded casement sash triple glazed
Side hung 900mm (w) x 1800mm (h) butt hinges or dedicated stay arms with 80kg weight carrying capacity
Top hung 1300mm (w) x 1500mm (h) butt hinges or dedicated stay arms with 80kg weight carrying capacity
GLAZING
System10 Aluminium is internally glazed and can accommodate glazing units from 24mm to 36mm
U-VALUES
System10 Aluminium Casement window meets the current requirements of Building Regulations when
fitted with an appropriately specified 28mm double glazed unit. U-Values of 1.4W/m2K can be achieved
if the window is fitted with a standard 28mm double glazed unit.
This level of thermal insulation complies with Code level 3 & 4 of the Code for Sustainable Homes. For
further information contact the Technical Department at WHS-Halo or visit our website.
The System10 Aluminium casement window also achieves ‘A’ ratings when assessed against the
criteria of the Windows Energy Rating Scheme (WER).
STANDARDS
System10 Aluminium can be used to manufacture windows that conform to BS6375 Part 1 & 2 and
BS7950, the standard for enhanced security.
COLOURS
System10 Aluminium can be powder coated in any RAL colour – different colours can be specified
for inside and outside.
Top Swing/Fully Reversible Windows
The System10 Aluminium top swing window
is ideal for use in areas where access
for cleaning is limited such as high rise
buildings. When fully opened the window
protrudes entirely to the outside leaving
internal decorations and window coverings
undisturbed. It features bevelled sightlines and
a 70mm front to back dimension.
Maximum Sizes
Double glazed
1500mm (w) x 1600mm (h)
Triple glazed
1200mm (w) x 1300mm (h)
GLAZING
System10 Aluminium is internally glazed and can accommodate glazing units from 24mm to 48mm
U-VALUES
System10 Aluminium Top swing windows meets the current requirements of Building Regulations when
fitted with an appropriately specified 28mm double glazed unit. U-Values of 1.4W/m2K can be achieved
if the window is fitted with a standard 28mm double glazed unit.
This level of thermal insulation complies with Code level 3 & 4 of the Code for Sustainable Homes. For
further information contact the Technical Department at Bowater Architectural or visit our website.
This window also achieves ‘A’ ratings when assessed against the criteria of the Windows Energy Rating
Scheme (WER).
STANDARDS
System10 Aluminium can be used to manufacture windows that conform to BS6375 Part 1 & 2 and
BS7950, the standard for enhanced security.
The System10 Aluminium top swing window can be safely cleaned from the inside in accordance
with BS8213.
COLOURS
System10 Aluminium can be powder coated in any RAL colour - different colours can be specified
for inside and outside.
Tilt & Turn Windows
The System10 Aluminium Tilt and Turn window
is a high performance aluminium window
which, because of its ingenious design, offers
unbeatable thermal performance at a very
competitive cost. The hinge and locking system
allows the window to be used as a side hung
open in sash, or as a tilt in sash hinged at the
bottom. It features bevelled sightlines and a
70mm front to back dimension.
Maximum Sizes
Double glazed
1500mm (w) x 1500mm (h) OR 1100mm (w) x 2100mm (h)
Triple glazed
1500mm (w) x 1500mm (h) OR 900mm (w) x 2100mm (h)
GLAZING
System10 Aluminium is internally glazed and can accommodate glazing units from 24mm to 36mm
U-VALUES
System10 Aluminium Tilt & Turn windows meets the current requirements of Building Regulations when
fitted with an appropriately specified 28mm double glazed unit. U-Values of 1.4W/m2K can be achieved
if the window is fitted with a standard 28mm double glazed unit.
This level of thermal insulation complies with Code level 3 & 4 of the Code for Sustainable Homes. For
further information contact the Technical Department at Bowater Architectural or visit our website.
This window also achieves ‘A’ ratings when assessed against the criteria of the Windows Energy Rating
Scheme (WER).
STANDARDS
System10 Aluminium can be used to manufacture windows that conform to BS6375 Part 1 & 2 and
BS7950, the standard for enhanced security.
The System10 Aluminium Tilt & Turn windows can be safely cleaned from the inside in accordance
with BS8213.
COLOURS
System10 Aluminium can be powder coated in any RAL colour - different colours can be specified
for inside and outside.
In-line Pivot Windows
The System10 Aluminium in-line pivot window
has been designed to replicate large timber
pivots often found in high rise applications. The
large opening sash sizes that are possible with
this system allows like for like replacements
in most cases and opens up a wide range of
design opportunities.
Multi point ‘perimeter’ gearing ensures high
security, and maximum compression on
weather seals, providing excellent weather
performance. The windows also feature
restrictors for safety. Pivot hinge allows the
window to be cleaned safely from the inside.
Maximum Sizes (based on shootbolt locking)
Double glazed
1500mm (w) x 1600mm (h)
Triple glazed
1200mm (w) x 1300mm (h)
GLAZING
System10 Aluminium is internally glazed and can accommodate glazing units from 24mm to 36mm
U-VALUES
System10 Aluminium In-line pivot windows meets the current requirements of Building Regulations when
fitted with an appropriately specified 28mm double glazed unit. U-Values of 1.4W/m2K can be achieved
if the window is fitted with a standard 28mm double glazed unit.
This level of thermal insulation complies with Code level 3 & 4 of the Code for Sustainable Homes. For
further information contact the Technical Department at Bowater Architectural or visit our website.
This window also achieves ‘A’ ratings when assessed against the criteria of the Windows Energy Rating
Scheme (WER).
STANDARDS
System10 Aluminium can be used to manufacture windows that conform to BS6375 Part 1 & 2
and BS7950, the standard for enhanced security. The open in facility allows the outside pane to be
cleaned in accordance with BS8213.
COLOURS
System10 Aluminium can be powder coated in any RAL colour - different colours can be specified
for inside and outside.
Residential Doors
The System10 Aluminium Residential Door is
a high performance door which, because of
its ingenious design, offers unbeatable thermal
performance at a very competitive cost. It
features bevelled sightlines and a 70mm front
to back dimension.
Maximum Sizes
Double glazed
1150mm (w) x 2200mm (h)
Triple glazed
1150mm (w) x 2200mm (h)
GLAZING
System10 Aluminium is internally glazed and can accommodate glazing units and door panels from
24mm to 36mm
U-VALUES
System10 Aluminium residential door meets the current requirements of Building Regulations when
fitted with appropriately specified 28mm double glazed units and/or door panels.
STANDARDS
System10 Aluminium can be used to manufacture doors that conform to PAS23 and PAS 24, the
standards that cover weather tightness and enhanced security.
COLOURS
System10 Aluminium can be powder coated in any RAL colour - different colours can be specified
for inside and outside.
Services to the
construction industry
Manufacture &
distribution
Here at Bowater Architectural we want to make
choosing, specifying, purchasing, installing and
maintaining our products as easy as possible.
As well as our highly trained and experienced
Technical Department, based at our Head
Office, we have a team of Development
Managers who provide on the spot help and
advice. The services we offer include:
The profiles used to manufacture System10
Aluminium windows and doors are extruded
under a quality assurance management system
accredited to ISO9001:2000. The profiles
meet or exceed the requirements of BS EN
12608:2003.
u Full technical back up including
specifications (Bowater Architectural’s
products are included on NBS+
specifications), drawings, site surveys and
calculations
u Window and door manufacture through
our network of fabricator partners
u An installation service
u Over all project management, including
client liaison
u Full maintenance plans
Since 1979 we have been designing and
supplying window profile to fabricators and
installers in the UK and Ireland.
All of our activity takes place at Minworth in
Sutton Coldfield.
Our extrusion facility has its own polymer
blending plant, an in-house tool room and
a foiling facility. We also have an in-house
quality testing centre and a 100,000 square ft
modern distribution centre.
Other products
Veka and all its related companies
manufacture and supply a wide range of
energy efficient fenestration solutions. They are
suitable for use in all sectors, for new build
and refurbishment.
WINDOW STYLES AVAILABLE
PVC-U
PVC-U
PVC-U
PVC-U
PVC-U
Casement
Tilt and Turn
Top swing or fully reversible
In-line Pivot
Vertical sliding sash
DOOR STYLES AVAILABLE
PVC-U French patio
PVC-U Sliding patio
PVC-U Bi fold
Composite – single and double rebate
Utility/fire rated doors
Flood Defence Doors
The Environment
Veka and all its related companies are totally
committed to ensuring our activities have zero
or minimal impact on the environment. Our
products are designed to save energy and
reduce carbon emissions.
Our manufacturing facilities are constantly
audited to ensure our resource use is
minimised and our waste disposal and
recycling facilities are as efficient as possible.
In 2000 we were one of the first PVC-U
window profile extruders in the UK to be
awarded the International Standard for
Environmental Management (ISO 14001).
In 2009 and 2010 we were awarded a
prestigious Green Apple Award in recognition
of our innovative energy saving window
systems.
Aluminium
Further information
ARCHITECTURAL
Veka has an extensive and easily searchable
website, putting the information ARCHITECTURAL
you need at
your finger tips.
Go to www.bowaterbuildingproducts.com
to find more detailed information about our
products and service.
There is also an enquiry service, so if you
cannot find exactly what you need you can
email us for a timely response.
A BRAND OF THE VEKA UK GROUP
ARCHITECTURAL
A BRAND OF THE VEKA UK GROUP
Bowater Architectural
Water Orton Lane
Minworth
Sutton Coldfield
A COMPANY
OF THE B76
VEKA UK9BW
GROUP
West
Midlands
Tel: 0121 749 3000
Fax: 0121 749 2511
Email: info@bowaterarchitectural.com
www.bowaterarchitectural.com
A COMPANY OF THE VEKA UK GROUP
This Data has been prepared by Bowater Architectural,
a division of Veka, with reasonable care for general
guidance purposes only.
Reliance on the information contained in this document
shall be the entire responsibility of the person/persons so
relying and in no event shall Veka be liable for any direct
loss or damage attributable to reliance on this Technical
Data Sheet. Under no circumstances shall Veka be liable
for any indirect or consequential loss or damage including,
but not limited to, loss of profit and loss of contracts.
As part of our policy of continuous improvement we
reserve the right to alter specifications without prior notice.
© Veka 2010
EE00072