Uploaded by fe_cbarros

Fittings Clamps - Waukesha Cherry-Burrell - SPX Flow

advertisement
Fittings & Clamps
Ordering Information .............................................page 4
Industry Cross Reference Guide .....................page 5
S-Line Fittings ............................................................pages 9-21
Sanitary, Clamp-to-Clamp Fittings featuring
the S-Clamp quick-disconnect union
Sanitary Weld Fittings ..........................................pages 22-26
Polished fittings for permanent installations
Tube O. D. Weld Fittings .......................................pages 27-30
Non-Polished fittings for permanent installations
I-Line Fittings ..............................................................pages 31-38
Sanitary, Clamp-to-Clamp Fittings featuring the
heavy-duty, I-Line quick-disconnect union
Sanitary Bevel Seat Fittings ..............................pages 39-50
Sanitary Fittings featuring the bevel and
nut union
Sanitary Q-Line Fittings ........................................pages 51-55
Sanitary Fittings featuring the heavy-duty
Q-Line, quick-disconnect, face-to-face union, Sch 5
I.P.S. Schedule Fittings ........................................pages 56-58
S-Line Ferrules, Gaskets, Adapters, Clamps
I-Line Ferrules, Gaskets, Clamps
Hangers ..........................................................................pages 59-60
Durable piping supports for controlled areas
Miscellaneous Fittings...........................................pages 61-66
Spools, Flange Adapters, "Camlock", Pipe to Tube Adapters
John Perry, Aseptic Fittings, Sweep Elbows
Friction Loss Chart .................................................page 67
WCB-Flow Products
Fittings and Clamps
High Quality For Superior Weldability
and Fit Up
•
WCB-Flow Products quality means
dependable concentricity and dimensional
correctness. WCB-Flow Products fittings
‘fit’ and weldability is assured.
Committment to Quality and
Excellence in Manufacturing and
Customer Service
•
As a major supplier of Stainless Steel Fittings, Valves, Pumps and Process Equipment, WCB-Flow Products has established
a record of precision engineering and quality
manufacturing.
•
WCB-Flow Products has a long-standing
reputation for excellence in Technical and
Customer Service.
We’re Close
•
Technical and Customer Services are based in our Buffalo, New York facility, where we maintain large inventories of the fittings
you need.
We’re More Responsive
•
Standard parts have expedited delivery though 7:00 p.m. EST, Monday-Thursday, 6:00 p.m EST Friday
•
No extra fees for overnight fittings shipments.
•
Our Customer Service and Applications Engineers are available to answer your questions.
3
WCB-Flow Products
Fittings and Clamps
To specify the part completely, start with the description and select the additional options as shown below.
Be sure to denote the material and polish combination. See the example below.
Model Number Example
1
234
2CMP -7
2.0"
316L
2
1
Polish Combinations
Description
2CMP- 90° Elbow
Size
1
/2
3
/4
1
11/2
2
21¼2
3
4
3
A
3
3
31¼8
37¼8
4 5¼8
5 3¼8
6 5¼16
8 5¼16
7 Polished I.D. and O.D.
Inside diameter is mechanically polished to
32Ra or 180 Grit finish. Outside diameter is
mechanically polished with polish marks
blended.
3 Polished I.D. and Unpolished O.D.
Outside diameter is mill or tumbled finish.
1Unpolished I.D. and Unpolished O.D.
Both I.D. and O.D. are mill or tumbled finish.
Size
/2"
/4"
1"
11/2"
2"
21/2"
1
3
3"
4"
6"
8"
10"
12"
4
Material*
T304 Stainless Steel
T316L Stainless Steel
*All Fractional Fittings are T316L Stainless Steel.
Notes The Dimension Tables
All Dimensions are in inches.
Wall Thickness: Fittings 1/2"-3.0" sizes are manufactured with 16 gauge (0.065") wall thickness. The 4.0" tube size are
manufactured with 14 gauge (0.083") wall thickness. The 6.0" & 8.0" tube size are manufactured with 12 gauge (0.109")
wall thickness.
4
WCB-Flow Products
Fittings and Clamps
Industry Cross reference GUIDE
WCB-Flow
Products
Andron
VNE
TOPLINE
Alfa Laval
Swagelok
(Tri-Clover)
DIXON
(BRADFORD)
CLAMP ELBOWS, TEES, AND CROSSES
2CMP
AC2SX
EG2C
2CMP
B2CMP
JC2
B2CMP
2FMP-14
AC2F14
EG2FPR
2FMP-14
2FMP-14
JC2-14
B2FMP-14
2FMP-15
AC2F15
EG2FTR
2FMP-15
2FMP-15
JC2-15
B2FM-15
EG2C-31PR
2FMP-31
2FMP-31
JC2-31
---
EG2C-31
SCMP-
2CMP-
JC2-J31
---
2FMP-31
2CMP-31MP
AC2C31
2E31MP
31MP
31MP
EG231-FPR
2E31MP
2E-31MP
2E-JC31
---
2KMP
AC2KSX
EG2K
2KMP
B2KMP
JC2K
---
7MP
AC7
EG7
7MP
B7MP
JC7
B7MP
7MPS
B7MPS
JC7S
---
AC9
EG9
PMP
B9MP
JC9
B9MP
7MPS
9MP
CLAMPS
13MHHM-7
PW13MHHM
P13MHHM
13MHHM-H
13MHHM
13MHHM
JC13HD
13MHHM-DP
AC13H
13MHHM
13LAH
A13MHM
AJC13HC
13MHHM
13MHHS
13MHHS
AJC13HS
13MHHM-3P
AC13HP
13MHP
13MHP
13MHP
AJC13HP
13MHP
EG13
13MHLA
13MHLA
P13MHHS
13MHP
K13LH
13MHLA
A13MO
13MO
CLAMP FERRULES, CAPS, AND ADAPTERS
L14AM7
AC14A
EG14AM7
L14AM7
L14AM
JC14AM7
L14AM7
14MPHR
AC14AHR
EG14RT
14MPHR
14MPHR
JC14AHR
14MPHR
14MPHT
AC14AHT
EG14HT
14MPHT
14MPHT
JC14AHT
14MPHT
EG14RT
14RMP
14RMP
JC14EX
14RMP
14WMP
AC14X
EG2CS
14WMP
14WMPS
JC14X
14WMP
14MPW
AC14H
EG14W
14MPW
14MPW
JC14H
14MPW
14WLMP
AC14WL
EG14WL
14WLMP
14WLMP
JC14
14WLMP
16AMP
AC16
EG16A
16AMP
16AMP
JC16
16AMP
EG17PR
17MP-14
17MP-14
JC17-14
17MP-14
14RMP
17MP-14
17MP-15
EG17TR
17MP-15
17MP-15
JC17-15
17MP-15
21MP
AC21
EG21
21MP
21MP
JC21
21MP
22MP
AC22
EG22
22MP
22MP
JC22
22MP
23BMP
AC23B
EG23B
23BMP
23BMP
JC23B
23BMP
31WMP
JC14XR
---
31K
5
WCB-Flow Products
Fittings and Clamps
WCB-Flow
Andron
Products
VNE
TOPLINE
Alfa Laval
Swagelok
(Tri-Clover)
DIXON
(BRADFORD)
CLAMP REDUCERS
31-14MP
EG31CC
31-14MP
B31-14MP
JC31
B31-14MP
31PMP
EG31PC
31PMP
31PMP
J14-C31
B14-C31
31MPP
EG31CP
31MPP
31MPP
JC31-14
B31-14
31TMP
EG31TC
31TMP
31TMP
J15-C31
B15-C31
31MPT
EG31CT
31MPT
31MPT
JC31-15
B31-15
32-14MP
AC31
EG32CC
32-14MP
B32-14MP
JC32
G32-14MP
32PMP
AC32
EG32PC
32PMP
32PMP
J14-C32
B14-C32
32MPP
EG32CP
32MPP
32MPP
JC32-14
B32-14
32TMP
EG32TC
32TMP
32TMP
J15-C32
B15-C32
EG32CT
32MPT
32MPT
JC32-15
B32-15
32MPT
BEVEL SEAT ELBOWS, TEES & CROSSES
2C
2C
2C
2C
2C
2C
B2C
2E
2E
2E
2E
2E
2E
B2E
2F
2F
2F
2F
2F
2F
B2F
2F-31
2F-31
2F-31
2F-31
2F-31
2F-31
---
2F-32
2F-32
2F-32
2F-32
2F-32
2F-32
---
2K
2K
2K
2K
2K
2K
B2K
2P
2P
2P
2P
2P
2P
B2P
7
7
7
7
7
7
B7
7A
7A
7A
7A
7A
7A
B7A
7B
7B
7B
7B
7B
7B
B7B
9
9
9
9
9
9
B9
9A
9A
9A
9A
9A
9A
B9A
13H
13H
13H
13H
13H
13H
13H
14A
14A
14A
---
L14A7
14A
14A
14AHR
14AHR
14AHR
14AHR
14AHR
14AHR
14MAHR
BEVEL SEAT NUTS FERRULES, CAPS & ADAPTERS
6
14AHT
14AHT
14AHT
14AHT
14AHT
14AHT
14MAHT
14PRF
14WF
14RP
---
14PRF
14WF
14PRF
15A
15A
EG15A7
---
L15A7
15A
15A
15AHR
15AHR
15AHR
15AHR
15AHR
15AHR
15MAHR
15AHT
15AHT
15AHT
15AHT
15AHT
15AHT
15AHT
15TRF
15WF
15TR
---
15TRF
15WF
15TRF
16A
16A
16A
16A
16A
16A
16A
23B
23B
23B
23B
23B
23B
23B
21
21
21
21
21
21
B21
22
22
22
22
22
22
B22
21F
---
14-19
14-19
14-19
14-19
B14-19
22F
---
14-18
14-18
14-18
14-18
---
WCB-Flow Products
Fittings and Clamps
WCB-Flow
Andron
Products
VNE
TOPLINE
Alfa Laval
Swagelok
(Tri-Clover)
DIXON
(BRADFORD)
BEVEL SEAT REDUCERS
31TP
31TP
31TP
31TP
31TP
31TP
B31TP
31TT
31TT
31TT
31TT
31TT
31TT
B31TT
31-14F
31-14F
31-14F
31-14F
31-14F
31-14F
B31-14F
31-15F
31-15F
31-15F
31-15F
31-15F
31-15F
B31-15F
32-14F
32-14F
32-14F
32-14F
32-14F
32-14F
B32-14F
32-15F
32-15F
32-15F
32-15F
32-15F
32-15F
B32-15F
31-19F
31-19F
---
31-19F
31-19F
31-19F
---
31-18F
31-18F
---
31-18F
31-18F
31-18F
---
2CW
A2S
E2S
L2S
L2S
J2S
B2S
2TW
A2C
E2T
---
L2C
J2C
B2T
2CKW
AC2C
E2C
---
L2CM
J2CM
B2CM
2FW
A2F
E2F
L2F
L2F
J2F
B2FP
2KW
A2KS
E2KS
L2KS
L2KS
J2KS
B2KS
2KT
A2K
E2KT
L2K
---
J2K
B2KT
2KP
A2P
EK2P
L2P
---
J2P
B2KP
2WU
A2WU
E2WU
L2WU
2WUL
J2WU
B2WUL
SANITARY WELD ELBOWS
SANITARY WELD TEES & CROSSES
7W
A7W
E7WWW
L7WWW
B7WWW
J7W
B7WWW
7WWT
---
E7WWT
L7WWT
---
J7WWT
B7WWT
7WWK
---
E7WWC
L7WWM
B7WWM
J7WWM
B7WWM
7WTW
---
E7WTW
L7WTW
---
J7WTW
B7WTW
7WKW
---
E7WCW
L7WTW
---
J7WMW
B7WMW
7WTT
---
E7WTT
L7WTT
---
J7WTT
B7WTT
7WKK
---
E7WCC
L7WMM
---
J7WMM
B7WMM
7TTW
---
E7TTW
L7TTW
---
J7TTW
B7TTW
7MMW
---
E7CCW
L7MMW
---
J7MMW
B7MMW
7WR
A7WR
E7RWWW
L7RW
B7RWWW
J7WR
B7WR
9W
A9W
E9WWWW
L9WWWW
B9WWWW
J9W
B9WWW
SANITARY WELD REDUCERS
31W
A31W
E31WW
L31
L31
J31
B31W
31P
---
E31PW
L31P
L31P
J31P
B31P
31KW
---
E31CW
L31MP
L31M
J31M
B31M
32W
A32W
E32WW
L32
L32
J32
B32W
32P
---
E32PW
L32P
L32P
J32P
B32P
32KW
---
E32CW
L32PMP
L32M
L32M
B32M
B2WC
A2SX
V2WC
2WCL
2WCL
J2SX
B2WCL
TUBE O.D. WELD FITTINGS (UNPOLISHED)
B2WK
A2KSX
V2WK
2WK
2WK
J2KSX
B2WK
B2WU
A2WU
---
2WUL
2WUL
J2WU
B2WUL
B7W
A7W
V7W
7W
B7WWW
J7W
B7WR
A7WR
V7WR
7WR
B7RWWW
J7WR
---
B9W
A9W
V9W
9W
B9WWWW
J9W
---
B9WR
A9WR
---
9WR
---
J9WR
---
B19W
A19W
19WB
19WB
19WB
J19W
B19WB
B28WA
A28WA
E28WA
---
28WA
J28WA
B28WA
B31W
A31W
V31W
31W
L31
J31W
B31W
7
WCB-Flow Products
Fittings and Clamps
WCB-Flow
Andron
Products
VNE
TOPLINE
Alfa Laval
(Tri-Clover)
Swagelok
DIXON
(BRADFORD)
TUBE HANGERS
K24FCF
---
---
---
A24FCF
---
---
TH
A24H
E24
SP24G
B24FCF
J24FCF
B24RG
26CB
---
---
---
---
---
---
THP
A24HP
---
---
D24FCF
J24PVC
B24P8
I-LINE FITTINGS
2CI
---
EC21
---
HDI-2C
---
B2CI
2FI
---
E2FI
---
HDI-2F
---
B2FI
2EI
---
E2EI
---
HDI-2E
---
B2EI
2KI
---
E2KI
---
HDI-2K
---
B2KI
2PI
---
E2PI
---
HDI-2P
---
B2PI
7I
---
E7I
---
HDI-7
---
B7I
7AI
---
E7AI
---
---
---
B7AI
7BI
---
E7BI
---
---
---
B7BI
9I
---
E9I
---
---
---
B9I
13IS
---
E13IS
13IS
HDI-13-UD
13IS
13IL
13I
---
---
---
---
---
---
13IU
---
---
---
---
---
---
14WI
AY14WI
E14WI
14WI
HDI-14W
14WI
14WI
15WI
AY15WI
E15WI
15WI
HDI-15W
15WI
15WI
14WLI
AY14WLI
E14WLI
14WLI
---
---
14WLI
15WLI
AY15WLI
E15WLI
15WLI
---
---
15WLI
17-14I-15I
---
E17-14I-15I
---
---
---
17-14I-15I
17-15I-15I
---
E17-15I-15I
---
---
---
17-15I-15I
17-14I-14I
---
E17-14I-14I
---
---
---
17-14I-14I
17-14I-14MP
---
E17-14I-
---
---
---
17-14I-14MP
14MP
17-14I-15I
---
E17-14I-15I
---
---
---
17-14I-15I
17-15I-14
---
E17-15I-14
---
---
---
17-15I-14
17-15I-15I
---
E17-15I-15I
---
---
---
17-15I-15I
17-15I-14MP
---
E17-15I-
---
---
---
17-15I-14MP
14MP
8
16AI-14I
AY16AI-14I
E16AI-14I
16AI-14I
HDI-16A-14
16AI-14I
16-AI-14I
16AI-15I
AY16AI-15I
E16AI-15I
16AI-15I
HDI-16A-15
16AI-15I
16AI-15I
B31I-14FI
---
E31I-14I
---
HDI-31-14F
---
B31I-14I
B31I-15FI
---
E31I-15I
---
HDI-31-15F
---
B31I-15I
B32I-14FI
---
E32I-14I
---
HDI-32-14F
---
B32I-14I
B32-15FI
---
E32I-15I
---
HDI-32-15F
B32I-15I
B32I-15FI
---
E32I-15I
---
HDI-32-15F
B32I-15I
WCB-Flow Products
Fittings and Clamps
S-Line Fittings
WCB-Flow Products S-Line versatile fittings were originally
designed for both COP (clean-out of-place) and CIP (clean-inplace) applications.
The WCB-Flow Products S-Line union is leak proof and free of
crevices and also consist of two matching ferrules, a gasket, and
a clamp. Utilizing these unions into a process piping system
will ensure easy assembly and disassembly of process lines and
equipment. The union is compact, which makes possible closer
nesting of lines and more efficient use of production space.
S-Line Fittings are available with a variety of I.D. and O.D.
polishes or unpolished, in T304 or T316L Stainless Steel and in
half-inch through 12" sizes.
•
Available in ½” through 12”
•
Fittings are made of T304 & T316L stainless steel.
•
Finishes are available in any standard combination.
•
ID polish is 32Ra and Unpolished
•
OD polish is 32Ra and Unpolished
•
Electropolished S-Line Fittings are offered.
•
Gaskets are available in Buna, EPDM, Teflon®, FKM, and Silicone as a standard.
•
Meets 3A and FDA requirements.
9
WCB-Flow Products
Fittings and Clamps
S-Line Elbows
2KMP 45° ELL
2CMP 90° ELL
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
8
A
11/4
15 /8
2
23/4
31/2
41/4
5
6 5/8
101/2
127/8
10
A
2
23/4
31/2
41/4
5
6 5 /8
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
8
A
/32
31
/32
11/8
17/16
13/4
21/16
23 /8
31/8
51/4
9 5 /8
25
2FMP-15 90° ELL
2FMP-14 90° ELL
Size
1
11/2
2
21/2
3
4
Note: All 1/2" & 3/4" available in T316L only. All dimensions are in inches.
B
2 3/16
2 31/32
3 23 /32
419 /32
513 /32
7 7/32
Size
1
11/2
2
21/2
3
4
A
2
23/4
31/2
41/4
5
6 5 /8
B
2 3/16
231/32
3 23 /32
419 /32
513 /32
7 7/32
WCB-Flow Products
Fittings and Clamps
S-Line Tees & Crosses
Note: All 1/2" & 3/4" available in T316L only. All dimensions are in inches.
7MP TEE
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
8
A
11/4
23/8
23/8
23 /4
31/2
31/2
3 3 /4
41/2
61/2
97/8
B
21/2
4 3 /4
4 3 /4
51/2
7
7
71/2
9
13
19 3 /4
7ERMP & 7RMP REDUCING TEE
Size
/4 x 1/2
1 x 1/2
1 x 3/4
11/2 x 1/2
11/2 x 3/4
11/2 x 1
2 x 1/2
2 x 3/4
2x1
2 x 11/2
21/2 x 1/2
21/2 x 3/4
21/2 x 1
21/2 x 11/2
21/2 x 2
3 x 3/4
3x1
3 x 11/2
3x2
3 x 21/2
4x1
4 x 11/2
4x2
4 x 21/2
4x3
6x3
6x4
3
9MP CROSS
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
A
11/4
23/8
23/8
23 /4
31/2
31/2
3 3 /4
41/2
61/2
B
21/2
4 3/4
4 3/4
51/2
7
7
71/2
9
13
A
25/8
25/8
25/8
27/8
27/8
25 /32
29 /16
29 /16
29 /16
29 /16
227/32
227/32
227/32
227/32
227/32
3 3 /32
3 3 /32
3 3 /32
31/16
3 3 /32
41/16
41/16
41/16
41/16
41/16
57/8
57/8
B
51/4
51/4
51/4
5 3/4
5 3/4
4 5 /16
51/8
51/8
51/8
51/8
511/16
511/16
511/16
511/16
511/16
6 3 /16
6 3 /16
6 3 /16
6 3 /16
6 3 /16
81/8
81/8
81/8
81/8
81/8
113 /4
113 /4
C
25/8
25/8
25/8
27/8
27/8
17/8
21/8
21/8
21/8
213 /32
23 /8
23 /8
23 /8
221/32
213 /16
25 /8
25 /8
229 /32
3 3 /32
3 3 /32
31/8
313 /32
319 /32
319 /32
319 /32
51/4
51/2
11
WCB-Flow Products
Fittings and Clamps
7RMPS TEE SHORT OUTLET
Size
3
/4 x 1/2
1 x 1/2
1 x 3/4
11/2 x 1/2
11/2 x 3/4
11/2 x 1
2 x 1/2
2 x 3/4
2x1
2 x 11/2
21/2 x 1/2
23 /4 x 3/4
21/2 x 1
21/2 x 11/2
21/2 x 2
3 x 1/2
3 x 3 /4
3x1
3 x 11/2
3x2
3 x 21/2
4 x 1/2
4 x 3 /4
4x1
4 x 11/2
4x2
4 x 21/2
4x3
6x4
12
A
51/4
51/4
51/4
5 3/4
5 3/4
4 3 /8
51/8
51/8
51/8
51/8
511/16
511/16
511/16
511/16
511/16
6 3 /16
6 3 /16
6 3 /16
6 3 /16
6 3 /16
6 3 /16
81/8
81/8
81/8
81/8
81/8
81/8
81/8
113 /4
B
25/8
25/8
25/8
27/8
27/8
23 /16
29 /16
29 /16
29 /16
29 /16
227/32
227/32
227/32
227/32
227/32
3 3 /32
3 3 /32
3 3 /32
3 3 /32
3 3 /32
3 3 /32
41/16
41/16
41/16
41/16
41/16
41/16
41/16
57/8
C
15
/16
11/16
11/16
15 /16
15 /16
15 /16
19 /16
19 /16
19 /16
19 /16
113 /16
113 /16
113 /16
113 /16
113 /16
21/16
21/16
21/16
21/16
21/16
21/16
29 /16
29 /16
29 /16
29 /16
29 /16
29 /16
29 /16
311/16
9RMP REDUCING CROSS
Size
/4 x 1/2
1 x 1/2
1 x 3/4
11/2 x 1/2
11/2 x 3/4
11/2 x 1
2x1
2 x 11/2
21/2 x 1
21/2 x 11/2
21/2 x 2
3x1
3 x 11/2
3x2
3 x 21/2
4x1
4 x 11/2
4x2
4 x 21/2
4x3
6x3
6x4
3
A
25 /8
25 /8
25 /8
27/8
27/8
25 /32
29 /16
29 /16
227/32
227/32
227/32
3 3 /32
3 3 /32
3 3 /32
3 3 /32
41/16
41/16
41/16
41/16
41/16
57/8
57/8
B
51/4
51/4
51/4
5 3 /4
5 3 /4
4 5 /16
51/8
51/8
4 3 /4
511/16
511/16
6 3 /16
6 3 /16
6 3 /16
6 3 /16
81/8
81/8
81/8
81/8
81/8
113 /4
113 /4
C
25 /8
25 /8
25 /8
27/8
27/8
25 /32
219 /32
219 /32
25 /6
25 /6
25 /6
31/11
31/11
31/11
31/11
41/16
41/16
41/16
41/16
41/16
57/8
57/8
D
25 /8
25 /8
25 /8
27/8
27/8
17/8
21/8
213 /32
23 /4
221/32
213 /16
25 /8
229 /32
31/16
3 3 /32
31/8
313 /32
3 9 /16
319 /32
319 /32
51/4
51/2
WCB-Flow Products
Fittings and Clamps
S-Line Ferrules
Note: Available in No. 7 polish only. All dimensions are in inches.
14MPW WELDING FERRULE
TANK SPUD (HEAVY)
Size
1
11/2
2
21/2
3
4
A
15 /8
15 /8
13/4
13/4
113 /16
21/8
B
/8
13/8
17/8
23/8
27/8
3 53 /64
7
14WMP SHORT WELDING
FERRULE
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
8
10
12
A
/2
1
/2
1
/2
1
/2
1
/2
1
/2
1
/2
5
/8
7
/8
7
/8
7
/8
7
/8
1
14RMP Ferrule Roll-On
Size
A
3
/4
1
11/8
11/2
2
15 /16
13 /8
21/2
3
17/16
4
11/2
C
15 /32
111/64
23 /16
245 /64
37/32
41/4
14WLMP BUTT WELDING
FERRULE
Size
1
11/2
2
21/2
3
4
6
8
10
12
A
3
3
3
3
4
4
6
6
6
6
L14AM7 Welding Ferrule
Tank Spud (light)
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
8
10
12
A
11/8
11/8
11/8
11/8
11/8
11/8
11/8
11/8
11/2
11/2
11/2
11/2
13
WCB-Flow Products
Fittings and Clamps
S-Line Adapters
Note: Available in No. 7 polish only. All dimensions are in inches.
14MPHR RUBBER HOSE ADAPTER
Size
1
/2 x 1/4
1
/2 x 3 /8
1
/2
3
/4 x 1/4
3
/4 x 3 /8
3
/4 x 1/2
3
/4
1 x 1/2
1 x 3 /4
1
11/2 x 1/2
11/2 x 3 /4
11/2 x 1
11/2
2
2 x 1/8
2 x 1/4
2 x 3 /8
21/2
3
4
6
8
A
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
111/16
11/2
11/2
111/16
111/16
25 /16
21/2
21/2
21/2
211/32
3 3/32
313/32
4
4
17MP-14 Bevel to S-line Adapter
Size
1
11/2
2
21/2
3
4
14
A
3
3
3
31/2
3 3 /4
4
14MPHT TYGON HOSE ADAPTER
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
8
A
13/4
13/4
41/2
41/2
41/2
41/2
41/2
4 5/8
41/2
41/2
17MP-15 Bevel Ferrule to
S-line Adapter
Size
1
11/2
2
21/2
3
4
A
111/16
123 /32
123 /32
127/32
129 /32
211/32
WCB-Flow Products
Fittings and Clamps
S-Line Caps
Note: Available in No. 7 polish only. All dimensions are in inches.
16AMP SOLID END CAP
Size
1
/2 x 3 /4
1
11/2
2
21/2
3
4
6
8
10
12
16AMP-SG Sight Glass
A
1
2
2
217/32
31/16
3 9 /16
411/16
6 9 /16
8 9 /16
10 9 /16
12 9 /16
S-Line ADAPTERS
21MP ADAPTER S-Line X MNPT
Size
1
/2 x 1/8
1
/2 x 1/4
1
/2 x 3 /8
1
/2 x 3 /4
1
/2
3
/4 x 3 /8
3
/4 x 1/4
3
/4 x 3 /8
3
/4 x 1/2
3
/4
1 x 1/2
1 x 3 /4
1
11/2 x 1/2
11/2 x 3 /4
11/2 x 1
11/2
2 x 1/2
2 x 3 /4
2x1
2 x 11/2
2
21/2
21/2 x 2
3
4
A
2
2
2
2
2
2
2
2
2
21/8
2
21/8
21/4
2
21/8
21/4
27/16
2
21/2
27/16
27/16
221/32
3 9/32
221/32
31/2
313/16
Size
11/2
2
21/2
3
4
A
2
217/2
31/16
3 9 /16
411/16
23BMP Cap (Thermometer)
Size
1
11/2
2
21/2
3
4
A
2
2
217/32
31/16
3 9 /16
411/16
B
/2 -14
3
/4 -14
3
/4 -14
3
/4 -14
3
/4 -14
3
/4 -14
1
Note: The 23BMP Cap can also be used
as a substitute for reducing #22MP i.e. - 1
x 1/2, 11/2 x 3/4 through 4 x 3/4. *Other
threads are available.
Note: All 1/2" & 3/4" available in T316L only. All dimensions are in inches.
22MP ADAPTER S-Line X FNP
Size
/2 x 1/8
1
/2 x 1/4
1
/2 x 3 /8
1
/2 x 3 /4
1
/2
3
/4 x 7/8
3
/4 x 1/4
3
/4 x 3 /8
3
/4 x 1/2
3
/4
1 x 1/2
1 x 3 /4
1
11/2 x 1/2
11/2 x 3 /4
11/2 x 1
11/2
2 x 1/2
2 x 3 /4
2x1
2 x 11/2
2
21/2
21/2 x 2
3
4
1
See also: 23BMP Cap
A
11/4
11/2
11/2
15 /8
11/2
11/4
11/2
11/2
11/2
15 /8
2
21/8
15 /8
2
15 /8
15 /8
15 /8
2
21/2
15 /8
15 /8
123 /32
23 /32
121/32
23 /16
25 /8
15
WCB-Flow Products
Fittings and Clamps
S-Line Reducers
Note: All 1/2" & 3/4" available in T316L only. All dimensions are in inches.
31-14MP CONCENTRIC REDUCER
Size
3
/4 x 1/2
1 x 1/2
1 x 3 /4
11/2 x 1/2
11/2 x 3 /4
11/2 x 1
2x1
2 x 11/2
21/2 x 11/2
21/2 x 2
3 x 11/2
3x2
3 x 21/2
4x2
4 x 21/2
4x3
6x3
6x4
8x6
28BMP TRUE Y
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
16
32-14MP ECCENTRIC REDUCER
Size
/4 x 1/2
1 x 1/2
1 x 3 /4
11/2 x 1/2
11/2 x 3 /4
11/2 x 1
2x1
2 x 11/2
21/2 x 11/2
21/2 x 2
3 x 11/2
3x2
3 x 21/2
4x2
4 x 21/2
4x3
6x3
6x4
A
2
3 3/8
3 3/8
3 3 /4
3 3/8
3 3/8
3 3/8
3 3/8
3 3/8
3 3/8
4 5 /8
4 5 /8
4 5 /8
43 /4
43 /4
43 /4
10 3 /8
101/2
123 /4
A
21/2
21/2
31/2
31/2
41/2
51/2
61/2
8 5 /8
8 3 /4
A
2
3
2
5
4
3
5
3
5
3
7
5
3
91/8
71/8
51/8
10 3 /8
101/2
3
28AMP Y-BRANCH 45°
Size
1
11/2
2
21/2
3
4
A
7
8 3 /8
9 3 /4
11
113 /4
14
B
51/2
611/16
75 /8
9
9 3 /8
115 /16
28IMP INSPECTION ELBOW
C
11/2
111/16
21/8
2
23 /8
211/16
D
51/2
611/16
75 /8
9
9 3 /8
115 /16
Size
1
11/2
2
21/2
3
4
A
27/32
29 /16
31/4
3 3 /8
4
51/8
B
2
23 /4
31/2
41/4
5
6 5 /16
WCB-Flow Products
Fittings and Clamps
S-Line Clamps
Pressure Ratings: Clamp vs. Union
Which is the Critical Value to Apply?
Some manufacturers display pressure ratings of their
clamp. But the clamp alone is not the critical value to
apply.
The Clamped Union is the critical element for
evaluating pipeline pressure capacity.
The Gasket is the weakest part of the Union.
Clamps alone will always be rated to higher pressure
and yet will not reflect the true pressure capacity of the
piping system.
Be certain your pressure ratings are for the Union not just the clamp.
Example: 13MHP High Pressure Clamp
Maximum
Maximum
Pressure of the Pressure of the
Union @ 70 F
Clamp @ 70 F
11/2"
1,220 psi
1,500 psi
2"
900 psi
1,000 psi
21/2"
720 psi
1,000 psi
3"
600 psi
1,000 psi
4"
570 psi
1,000 psi
}
The Difference: 280 psi-430 psi in
overstated pressure capacity!
A clamped union consists of: Two Ferrules, One Gasket, and One Clamp
For safe, correct design, evaluate your selections using the pressure ratings of the
clamped union and choose WCB-Flow Products clamps for quality and dependability.
17
WCB-Flow Products
Fittings and Clamps
S-Line heavy duty Clamps
SINGLE PIN HIGH POLISH
13MHHM
1/2" - 12"
T304 & T316
SINGLE PIN TUMBLED POLISH
P13MHHM
1/2" - 6"
T304
DOUBLE PIN MAKE
TUMBLED POLISH
PW13MHHM
1" - 4"
T304
Size
A
/2 & 3/4
1.109
1
2.122
11/2
2.122
2
2.654
21/2
3.185
3
3.717
4
4.820
6
6.695
8
8.695
10
10.695
12
12.695
*Also available in 1" to 6" Schedule
5 Pipe Sizes.
1
Pressure Ratings of the Union
Maximum
Maximum
Pressure
Pressure
Sizeat 70°Fat 250°F
1
/2 & 3 /4
1,500 psi
1,200 psi
1 & 11/2
500 psi
250 psi
2
450 psi
250 psi
21/2
400 psi
200 psi
3
350 psi
150 psi
4
200 psi
125 psi
6
150 psi
75 psi
8
100 psi
50 psi
10
75 psi
40 psi
Note: For pressure not listed contact factory.
See Fittings Price List and Ordering Information on page 4 for
additional clamp offerings.
18
3-SEGMENT
TUMBLED POLISH
P13MHHS
1" - 4"
T304
WCB-Flow Products
Fittings and Clamps
S- Line Clamps
S-Line LIVE LOAD NUT
13MHP HIGH PRESSURE CLAMP
13MHHMLL LIVEā€ˆLOADED CLAMP NUT
Strong, cast 304SS clamp with SS hex screws and
silicone bronze nuts to prevent galling.
T304 & T316 available 1/2 - 4
Size
/2 & 3 /4
1 & 11/2
2
21/2
3
4
6
1
A
1.051
2.064
2.595
3.130
3.659
4.762
6.695
For pressure ratings see below
13mhp Pressure Ratings of the Union
Maximum
Maximum
Pressure
Pressure
Sizeat 70°Fat 250°F
/2 & 3 /4
11/2
2
21/2
3
4
6
1
1,500 psi
1,220 psi
900 psi
720 psi
600 psi
570 psi
300 psi
1,200 psi
1,100 psi
830 psi
660 psi
550 psi
525 psi
200 psi
Maintains a constant tightening force on clamped
unions. Used especially with Teflon (PTFE) gaskets.
Teflon (PTFE) is chemically inert and so preferred
in many applications. However, when a connection
using a Teflon (PTFE) gasket is heated up and
then cooled, it will leak. The metal expands when
it is heated, which compresses the gasket. When
the system is cooled, the metal contracts, but the
Teflon (PTFE) does not return to its original size (no
memory) and the connection leaks.
The “Live Loaded” nut fits on standard S-Line
clamps (5/16" - 18 thread). This nut consists of a
two-piece outer housing, in which is contained a
quantity of specially constructed springs. When the
nut is tightened to 50 inch pounds on the clamp,
the springs in the nut are compressed.
As the product line is heated and cooled, the spring
pressure maintains a constant force on the clamp to
keep the gasket sealed between the two ferrules.
The “Live Loaded” nut can be purchased as a
separate item to retrofit existing clamps.
Note: Pressure ratings are based on the following parameters: Nominal wall thickness (.065 1.5"-3", .083 4"), use of
elastomer type gasket*, weld ferrules, properly aligned and
assembled joints (nuts torqued to 20 ft. lb.) and the absence
of water hammer or shock loads.
Ordering Information: Clamps
When ordering please specify
Remember, use the Clamped Union pressure rating above for
safe, correct pipeline design. Pressure ratings of the clamp
alone are generally higher yet do not take into account the full
clamped assembly with gasket.
13MHHM
PTFE gaskets are not recommended for use with
13MHP clamps.
P13MHHS
Consult factory for Solid PTFE and PTFE Envelope Gasket
information.
Higher pressure ratings for the clamp alone are available
upon request.
Model*
13MHP
*PW13MHHM
P13MHHM
Size
Description
Blank: O.D. Tubing
SCH5: Pipe Sizes (where
available)
The above format is used for all WCB-FP clamps.
Note: 13MHHMLL Live Loaded Clamp Nuts are sold separately from clamps.
*Please refer to the price pages for Puriti Clamp Information.
19
WCB-Flow Products
Fittings and Clamps
S- Line Gaskets
WCB-Flow Products Sanitary S-Line Gaskets are available in many basic designs in a variety of materials that are non-toxic and resistant
to contact media. Information on general service characteristics of gasket materials will be furnished upon request.
40MP Standard-Molded, one-piece o-ring gaskets are economical and meet the FDA requirements for use in food products (21CFR
177.2600).
Part Description
Material
Sizes Available
40MP-U
Buna (HYCAR)
40MP-X
Silicone
40MP-E
EPDM**
1/2" - 12" Tube or
Pipe
40MP-G
Solid PTFE (TEFLON - See below) (for all parts)
40MP-Y
FKM (Fluorel)
40MPF Flanged-Molded o-ring gaskets with a special rim that snaps on and stays in position. Available from stock, 1-12". Not for use
with 13MHP clamps.
Part Description
Material
Sizes Available
40MPF-U
Buna (HYCAR)
40MPF-SFY
FKM (Fluorel)
1/2" - 12" Tube or
40MPF-E
EPDM**
(for all parts)
40MPF-X
Silicone
Pipe
40MP-GR Envelope gasket has a PTFE* outer shell sandwiching an elastomer rubber insert.
Part Description
Material
Sizes Available
40MP-GR
PTFE* Outer Jacket Envelope with:
No Suffix = BUNA Insert
Suffix “V” = VITON Insert
1/2" - 12" Tube or
Suffix “E” = EPDM Insert
(for all parts)
Suffix “WV” = WHITE FKM
Pipe
* (PTFE) Poly Tetra Fluoro Ethylene, (13MHHMLL Live Loaded Clamp nuts recommended)
**Ethylene Propylene Diene Monomer
1VITON and TEFLON are trademarks of the E.I. DuPont DeNemaurs Company
20
WCB-Flow Products
Fittings and Clamps
Ordering Information: S-Line Gaskets
When ordering please specify
Model Number Example
1
2 3 4
40MP-FE 2"
1
*
EPDM
Part #
Description
Material
4
2
BUNA
EPDM
VITON1
Size
TEFLON1
SILICONE
* Be sure to include the
appropriate material suffix
i.e. 40MP-FE (Flanged EPDM)
*Size Designation
3
Blank: O.D. Tubing
SCH5: Pipe Sizes
Special Note Concerning The Limited Use of PTFE Gaskets:
Pressure Service Ratings shown on pages 18 & 19 for S-Line Clamps Do Not Apply to connections utilizing PTFE material
gaskets. As PTFE material by nature is virtually incompressible and tends to “cold flow” under normal operating conditions.
PTFE gaskets, have significant lower holding pressures when used with any standard clamp. Unreinforced PTFE is not
recommended for use at temperatures above 200°F (93°C).
To avoid possible leakage problems, please contact WCB-Flow Products before considering the use of PTFE material.
Please refer to our 13MHHMLL - LIVE LOADED CLAMP NUT which is designed to maintain a constant force on the clamp
to prevent leakage as the line is heated and cooled.
NOTE: PTFE gaskets are not recommended for use with 13MHP Clamps.
21
WCB-Flow Products
Fittings and Clamps
Sanitary Weld Fittings
WCB-Flow Products Sanitary Weld fittings are in use around
the world in dairies, distilleries, breweries, food processing
plants and cosmetics–wherever product purity and corrosion
resistance are important. These fittings are also utilized in
process piping systems where COP is not required or where
CIP can be accomplished.
Weld fittings also are available in 1/2" and 3/4" tube O.D.
sizes in 316SS as shown in our BPE Fittings Data Sheet
DS-1601.
ASME BPE fittings are also available to use with the latest
automatic welding equipment.
These fittings can be welded manually or with automatic
machines. Weld fittings are utilized to eliminate unnecessary
joints and dead leg zones for product to become entrapped.
•
Available in ½” through 12”
•
Fittings are made of T304 & T316L stainless steel.
•
Finishes are available in any standard combination.
•
ID polish is 32 Ra
•
OD polish is 32 Ra
•
Electropolished weld fittings are available upon request.
•
Meets 3A and FDA requirements.
22
WCB-Flow Products
Fittings and Clamps
Sanitary Weld Elbows
For 1/2" & 3/4" size fittings, see the DS-1601 BPE Fittings Data Sheet. All dimensions are in inches.
2CKW 90° ELL
2CW 90° Tube Bend
Size
1
11/2
2
21/2
3
4
6
Size
1
11/2
2
21/2
3
4
A
21/16
215 /16
41/16
5 3 /16
6 5 /16
8 5/16
8 3 /4
A
111/16
21/8
213 /16
31/2
43 /16
57/16
B
29 /16
37/16
4 9 /16
511/16
613 /16
815 /16
2KW 45° Tube Bend
2KKW 45° ELL
Size
1
11/2
2
21/2
3
4
A
21/16
215 /16
41/16
5 3 /16
6 5 /16
8 5/16
Size
B
13 /16
15 /8
25 /16
3
311/16
413 /16
1
11/2
2
21/2
3
4
6
A
13/16
15 /8
25 /16
3
311/16
413 /16
71/2
Sanitary Weld sweep elbows
2FW & 2TW
90° SWEEP ELBOW
Size
1
11/2
2
21/2
3
4
A
21/16
215 /16
41/16
5 3 /16
6 5 /16
8 5/16
B
23 /4
3 5 /8
425 /32
61/32
71/4
917/32
2KT & 2KP
45° SWEEP ELBOW
Size
1
11/2
2
21/2
3
4
A
13 /16
15 /8
25 /16
3
311/16
413 /16
B
17/8
25 /16
31/32
3 27/32
4 5 /8
61/32
23
WCB-Flow Products
Fittings and Clamps
Sanitary Weld Tees, Crosses & LATERALS
For 1/2" & 3/4" size fittings, see the DS-1601 BPE Fittings Data Sheet. All dimensions are in inches.
7WWK TEE WITH
S-LINE BRANCH CLAMP
SIZE
1
11/2
2
21/2
3
4
7W
Size
1
11/2
2
21/2
3
4
6
A
11/8
121/32
21/16
211/32
219 /32
37/16
5
B
21/4
3 5 /16
41/8
411/16
5 3 /16
67/8
10
A
11/8
121/32
21/16
211/32
219 /32
37/16
B
21/4
3 5 /16
41/8
411/16
5 3 /16
67/8
C
15 /8
25 /32
29 /16
227/32
3 3 /32
41/16
7WWT TEE WITH
BRANCH THREADED
7WR, 7ERWWK, 9RWWWW
Size
11/2 x 1
2x1
2 x 11/2
21/2 x 1
21/2 x 11/2
21/2 x 2
3x1
3 x 11/2
3x2
3 x 21/2
4x1
4 x 11/2
4x2
4 x 21/2
4x3
6x3
6x4
A
121/32
21/16
21/16
211/32
211/32
211/32
219 /32
219 /32
219 /32
219 /32
37/16
37/16
37/16
37/16
37/16
5
5
B
3 5 /16
41/8
41/8
411/16
411/1
411/16
5 3 /16
5 3 /16
5 3 /16
5 3 /16
67/8
67/8
67/8
67/8
67/8
10
10
C
13 /8
15 /8
129 /32
17/8
25 /32
25 /16
21/8
213 /32
29 /16
219 /32
25 /8
229 /32
31/16
3 3 /32
3 3 /32
43/4
47/8
7WR
A
11/8
121/32
21/16
211/32
219 /32
37/16
B
21/4
3 5 /16
41/8
411/16
5 3 /16
67/8
C
113 /16
23 /8
225 /32
3 3 /16
31/2
421/16
7ERWWK
9W Cross
9RWWWW
24
SIZE
1
11/2
2
21/2
3
4
Size
1
11/2
2
21/2
3
4
6
A
11/8
121/32
21/16
211/32
219 /32
37/16
5
B
21/4
3 5 /16
41/8
411/16
5 3 /16
67/8
10
WCB-Flow Products
Fittings and Clamps
Sanitary Weld Tees, Crosses & LATERALS
For 1/2" & 3/4" size fittings, see the DS-1601 BPE Fittings Data Sheet. All dimensions are in inches.
28AWWW 45° LATERAL
Size
1
11/2
2
21/2
3
4
A
3 5 /8
4 3 /8
51/8
6 5 /8
81/2
101/2
B
313 /16
4 9 /16
5
6 3 /8
73 /4
9 3 /8
C
/2
7
/8
11/8
15 /8
2
23 /8
1
D
31/8
31/2
4
5
61/2
81/8
28IWWK INSPECTION ELBOW
Size
1
11/2
2
21/2
3
4
A
11/16
215 /16
41/16
5 3 /16
6 5 /16
5 5 /16
B
11/8
13 /8
15 /8
17/8
21/8
23 /4
28BWWW TRUE WYE
Size
A
1
3
11/2
3
2
4
21/2
5
3
6
4
8
6
8
25
WCB-Flow Products
Fittings and Clamps
Sanitary Weld REDUCERS
For 1/2" & 3/4" size fittings, see the DS-1601 BPE Fittings Data Sheet. All dimensions are in inches.
31W Concentric Reducer
Size
11/2 x 1
2x1
2 x 11/2
21/2 x 1
21/2 x 11/2
21/2 x 2
3x1
3 x 11/2
3x2
3 x 21/2
4x2
4 x 21/2
4x3
6x3
6x4
31WC Concentric Reducer
Size
11/2 x 1
2x1
2 x 11/2
21/2 x 1
21/2 x 11/2
21/2 x 2
3x1
3 x 11/2
3x2
3 x 21/2
4x1
4 x 11/2
4x2
4 x 21/2
4x3
6x3
6x4
A
23 /8
23 /8
23 /8
23 /8
23 /8
23 /8
51/4
3 5 /8
3 5 /8
3 5 /8
3 5 /8
3 5 /8
3 5 /8
9
9
A
2
4
2
6
4
2
8
6
4
2
12
10
8
6
4
6
4
32W Eccentric Reducer
Size
11/2 x 1
2x1
2 x 11/2
21/2 x 1
21/2 x 11/2
21/2 x 2
3x1
3 x 11/2
3x2
3 x 21/2
4x1
4 x 11/2
4x2
4 x 21/2
4x3
6x3
6x4
31K, 32K, 31P, 32P
CONCENTRIC REDUCER
Size
11/2 x 1
2x1
2 x 11/2
21/2 x 1
21/2 x 11/2
21/2 x 2
3x1
3 x 11/2
3x2
3 x 21/2
4x1
4 x 11/2
4x2
4 x 21/2
4x3
26
A
21/2
41/2
21/2
61/2
41/2
21/2
81/2
61/2
41/2
21/2
125 /8
10 5 /8
8 5 /8
6 5 /8
4 5 /8
B
2.69
4.72
2.72
6.84
4.84
2.84
8.94
6.94
4.94
2.94
13.22
11.22
9.22
7.22
5.22
C
1
1
1.5
1
1.5
2
1
1.5
2
2.5
1
1.5
2
2.5
3
31K
32K
31P
32P
A
2
4
2
6
4
2
8
6
4
2
12
10
8
6
4
9
9
WCB-Flow Products
Fittings and Clamps
Tube O.D. Weld Fittings
Tube OD weld fittings are utilized in a wide variety of
industrial and non-sanitary applications where corrosive
environments are more of a concern than sanitation.
Utilizing these fittings ensures a permanent, rigid, and
chemical resistance process system.
WCB-Flow Products Tube O.D. Butt-Weld Fittings are
ideal for reliable, on-site fabrication of stainless steel
process lines not requiring sanitary polish. Alternate
finishes available upon request.
•
Available in 1/2” through 12”
•
Fittings are made of T304 & T316L stainless steel.
•
Unpolished tumble finish
Tube O.D. Weld Elbows
All dimensions are in inches.
B2WK 45° ELBOW
B2WC 90° ELBOW
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
A
/4
11/8
11/2
21/4
3
3 3 /4
41/2
6
9
3
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
B2WU
A
/32
15
/32
5
/8
15
/16
11/4
19 /16
17/8
21/2
3 3 /4
9
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
A
11/2
21/4
3
41/2
6
71/2
9
12
18
27
WCB-Flow Products
Fittings and Clamps
Tube O.D. Weld Tees & Crosses
All dimensions are in inches.
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
8
B9W
B7WR
B7W
A
3
/4
17/8
17/8
21/4
3
3
31/4
37/8
5
9
B
11/2
3 3 /4
3 3 /4
41/2
6
6
61/2
73 /4
10
18
Size
3
/4 x 1/2
1 x 11/2
1 x 3 /4
11/2 x 3 /4
11/2 x 1
2x1
2 x 11/2
21/2 x 11/2
21/2 x 2
3 x 11/2
3x2
3 x 21/2
4x2
4 x 21/2
4x3
6x3
6x4
6x2
A
17/8
17/8
17/8
21/4
21/4
3
3
3
3
31/4
31/4
31/4
37/8
37/8
37/8
5
5
5
C
1
11/2
2
21/4
21/8
23 /8
21/2
23 /4
31/4
3
31/2
31/4
4
3 3 /4
3 3 /4
4 3 /4
47/8
43 /4
B
23 /4
23 /4
23 /4
41/2
41/2
6
6
6
6
61/2
61/2
61/2
73 /4
73 /4
73 /4
10
10
10
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
A
/4
17/8
17/8
21/4
3
3
31/4
37/8
5
3
B
11/2
3 3 /4
3 3 /4
41/2
6
6
61/2
73 /4
10
Tube O.D. Lap-Joint Connection
All dimensions are in inches.
Lap-Joints utilize a weld-on, stub-end ferrule, and a back-up flange. Often used on vessels and heat-exchange equipment, lap-joints
adapt tubing to flange connections.
B14WA Stub End Lap-Joint
O.D.
1
/2
3
/4
1
11/2
2
21/2
3
4
6
A
11/8
13 /8
15 /8
13 /4
11/2
2
21/4
25 /8
3
B
15 /8
111/16
2
27/8
3 5 /8
41/8
5
6 3 /16
81/2
C
.098
.098
.130
.130
.130
.130
.166
.166
.218
To be used with B38W Tube O.D. Back
up Flange, following page.
28
WCB-Flow Products
Fittings and Clamps
Tube O.D. BACK UP Flanges
Note: Available in No. 1 polish only. All dimensions are in inches.
B38WA - 304 Stainless Steel Back-Up Flange
Tube Size
Outside Diameter Bolt CircleInside Diameter Thickness Bolt Hole Diameter
A
B
C
D
9
3
/2
31/2
23 /8
/16
/8
3
7
3
13
3
/4
3 /8
2 /4
/16
/8
3
1
41/4
31/8
11/16
/8
3
11/2
5
37/8
19 /16
/8
7
2
6
43 /4
21/16
/16
7
21/2
7
51/2
29 /16
/16
1
1
1
3
7 /2
6
3 /16
/2
1
4
9
71/2
41/16
/2
1
6
11
91/2
61/4
/2
Use with the B14WA Stud-End Lap-Joint, see previous page.
1
E
No. of Bolt Holes
/8
5
/8
5
/8
5
/8
3
/4
3
/4
3
/4
3
/4
7
/8
4
4
4
4
4
4
4
8
8
5
Tube O.D. Weld CAps
All dimensions are in inches.
B16W
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
A
/4
5
/16
3
/8
9
/16
3
/4
1
11/4
11/2
21/4
1
29
WCB-Flow Products
Fittings and Clamps
Tube O.D. Weld Adapters
All dimensions are in inches.
B19W MNPT to Weld Adapter
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
19WBF FNPT TO WELD ADAPTER
A
11/2
15 /8
13 /4
13 /4
113 /16
25 /16
21/2
29 /16
4
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
A
11/4
11/4
13 /8
113 /32
17/16
13 /4
17/8
115 /16
47/32
Tube O.D. Weld Laterals
Note: All dimensions are in inches. Reducing, other sizes and configurations upon request.
B28WA Lateral 45°
Tube O.D. Weld Reducers
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
A
1
1
1
13 /16
15 /8
11/2
17/8
21/16
B
5
5
5
6 3 /16
71/8
81/2
87/8
10 3 /4
C
6
6
6
73 /8
8 3 /4
10
10 3 /4
1213 /16
All dimensions are in inches.
B31W Concentric Reducer
O.D.
1 x 3 /4
11/2 x 3 /4
11/2 x 1
2x1
2 x 11/2
21/2 x 11/2
21/2 x 2
3 x 11/2
3x2
3 x 21/2
4x2
4 x 21/2
4x3
6x3
6x4
30
A
23 /8
23 /8
23 /8
23 /8
23 /8
23 /8
23 /8
3 5 /8
3 5 /8
3 5 /8
3 5 /8
3 5 /8
3 5 /8
9
9
B31WC Concentric Reducer
Size
11/2 x 1
2x1
2 x 11/2
21/2 x 1
21/2 x 11/2
21/2 x 2
3x1
3 x 11/2
3x2
3 x 21/2
4x1
4 x 11/2
4x2
4 x 21/2
4x3
6x3
6x4
A
2
4
2
6
4
2
8
6
4
2
12
10
8
6
4
51/2
51/2
B32W Eccentric Reducer
O.D.
1 x 3 /4
11/2 x 3 /4
11/2 x 1
2x1
2 x 11/2
21/2 x 11/2
21/2 x 2
3 x 11/2
3x2
3 x 21/2
4x2
4 x 21/2
4x3
6x3
6x4
A
1
3
2
4
2
4
2
6
4
2
8
6
4
9
9
NOTE: 4" and smaller available "no tangent" only.
WCB-Flow Products
Fittings and Clamps
I-Line Fittings
These are the original Cherry Burrell I-Line fittings and are made up of
interlocking flat face ferrules, a flat gasket and a clamp. This interlocking, metal-to-metal design eliminates over compression by the clamp
not allowing the gasket to be extruded into the product zone.
I-Line fittings can withstand higher vibrations, temperatures and
pressures than other available connections available.
•
Available in 1” through 8”
•
Fittings are made of T304 & T316L stainless steel.
•
Finishes are available in any standard combination.
•
ID polish is 32Ra
•
OD polish is 32Ra
•
Electropolished I-Line Fittings are available.
•
Gaskets are available in Buna, EPDM, Teflon®, FKM, an Silicone
as a standard.
•
Meets 3A requirements
Compressed
Gasket is compressed and fixed
amount without hold up cavities.
Decompressed
Metal-to-Metal stop controls gasket
extrusion to the bore line. Eliminates
liquid hold up and hard to clean
pockets, while reducing pressure drop.
Greater metal cross section for a
robust ferrule, resists damage due
to handling. Ideal for heavy duty
applicators and vibration resistance.
31
WCB-Flow Products
Fittings and Clamps
I-Line Elbows
Note: All dimensions are in inches.
2FI 90° Elbow One End Male
Other End Female
2CI 90° Elbow Both Ends Female
Size
1
11/2
2
21/2
3
4
6
A
2
27/8
3 3 /4
427/32
57/8
81/16
101/8
Size
1
11/2
2
21/2
3
4
6
B
2
27/8
3 3 /4
427/32
57/8
81/16
101/8
A
113 /16
211/16
315 /32
417/32
5 9 /16
73 /4
913 /16
2EI 90° Elbow Both Ends male
Size
1
11/2
2
21/2
3
4
6
2KI 45° Elbow
Both Ends Female
Size
1
11/2
2
21/2
3
4
6
32
A
113 /16
211/16
315 /32
417/32
5 9 /16
73 /4
913 /16
2PI 45° Elbow One End Male
Other End Female
A
15 /16
123 /32
21/8
25 /8
31/8
41/4
47/8
Size
1
11/2
2
21/2
3
4
A
15 /16
123 /32
21/8
25 /8
31/8
41/4
6
8" available on Special Order. Other configurations on request.
B
11/8
117/32
17/8
25 /16
31/8
315 /16
47/8 4 9 /16
WCB-Flow Products
Fittings and Clamps
I-Line Tees & Crosses
7I
Note: All dimensions are in inches.
9I
7RI Reducing Tee All ends Female
7I Tee & 9I cross All ends Female
Size
1
11/2
2
21/2
3
4
6
SIZE
11/2 x 1
2x1
2 x 11/2
21/2 x 11/2
21/2 x 2
3x2
3 x 21/2
4 x 21/2
4x3
A
113 /16
23 /8
225 /32
3 3 /16
31/2
421/32
6 3 /4
I-Line Ferrules - male
14WI-cb Ferrule, Male,
Welding
Size
1
11/2
2
21/2
3
4
6
8
A
/32
3
/4
25
/32
27
/32
29
/32
11/32
13
/16
13
/16
19
A
15 /16
17/16
11/2
17/16
11/2
113 /16
67/8
87/8
B
51/8
6 3 /16
6 3 /16
615 /16
615 /16
79 /16
79 /16
9 9 /16
9 9 /16
C
229 /32
37/32
317/32
3 23 /32
4 9 /32
41/16
413 /32
427/32
51/16
Note: All dimensions are in inches.
14WHI Ferrule, Male,
Welding (Heavy Wall)
Size
1
11/2
2
21/2
3
4
6
8
A
29 /16
3 3 /32
3 3 /32
315 /32
315 /32
3 25 /32
3 25 /32
425 /32
425 /32
B
.870
1.370
1.870
2.370
2.870
3.834
5.787
7.787
14WLI Ferrule, male,
Welding, Long
C
11/4
111/16
21/4
23 /4
3 5 /16
41/4
6 53 /64
8 53 /64
Size
1
11/2
2
21/2
3
4
6
8
8" available on Special Order. Other configurations on request.
A
19 /16
127/32
21/16
23 /16
23 /8
211/16
313 /16
313 /16
33
WCB-Flow Products
Fittings and Clamps
I-Line Ferrules - Female
15WHI Ferrule, feMale,
Welding (Heavy Wall)
15WI-CB Ferrule,
feMale, Welding
Size
1
11/2
2
21/2
3
4
6
8
A
/32
15
/16
11/32
15 /32
17/32
111/32
11/8
11/8
25
I-Line Adapters
14HRI Male to Rubber Hose
Adapter
Size
1
11/2
2
21/2
3
4
A
1 /16
15 /8
29 /32
23 /8
3 3 /16
315 /32
11
15HRI FeMale to Rubber
Hose Adapter
Size
1
11/2
2
21/2
3
4
34
Note: All dimensions are in inches.
A
17/8
113 /16
29 /16
211/16
31/2
3 25 /32
Size
1
11/2
2
21/2
3
4
6
8
A
11/2
15 /8
13 /4
13 /4
113 /16
21/8
3
3
B
.870
1.370
1.870
2.370
2.870
3.834
5.782
7.782
C
11/4
111/16
21/4
23 /4
3 5 /16
41/4
6 29 /32
8 29 /32
15WLI Ferrule,
female, long
Size
True 1
1
11/2
2
21/2
3
4
6
8
No. 7 polish only. All dimensions are in inches.
14HTI Male to tygon tube
adapter
Size
1
11/2
2
21/2
3
4
A
41/16
4 9 /32
41/2
413 /16
51/16
5 3 /16
15HTI feMale to tygon
tube adapter
Size
1
11/2
2
21/2
3
4
A
41/4
415 /32
43 /4
51/8
5 3 /8
51/2
8" available on Special Order. Other configurations on request.
A
15 /8
13 /4
21/32
25 /16
21/2
211/16
3
4
4
WCB-Flow Products
Fittings and Clamps
I-Line Caps
Note: All dimensions are in inches.
16AI-14ISG Sight Glass Male
16AI-14I Cap Male
Size
1
11/2
2
21/2
3
4
6
8
A
2
2
25/8
3 5/16
37/8
47/8
71/2
91/2
16AI-15I Cap Female
Size
1
11/2
2
21/2
3
4
6
8
A
2
2
25/8
3 5/16
37/8
47/8
71/2
91/2
Size
A
1
2
11/2
2
2
25/8
1
2 /2
3 5/16
3
37/8
4
47/8
6
71/2
8
91/2
*Acrylic, maximum temperature: 195°F
23BI Thermometer Cap Male
Size
1
11/2
2
21/2
3
4
B*
/2 -14NPT
3
/4 -14NPT
3
/4 -14NPT
3
/4 -14NPT
3
/4 -14NPT
3
/4 -14NPT
1
A
2
2
25/8
3 5/16
37/8
47/8
*Other taps are available
8" available on Special Order. Other configurations on request.
35
WCB-Flow Products
Fittings and Clamps
I-Line Adapters
17-14I-14I
Adapter Male by Male
Size
True 1
1
11/2
2
21/2
3
4
A
11/2
13 /16
11/2
19 /16
111/16
113 /16
21/16
17-15I-15I
Adapter FeMale by FeMale
Size
True 1
1
11/2
2
21/2
3
4
36
A
13 /4
19 /16
17/8
21/16
25 /16
27/16
211/16
No. 7 polish only. All dimensions are in inches.
17-14I-14MP Adapter Male
by S-Line (L14AM).
Size
1
11/2
2
21/2
3
4
A
13 /32
127/32
17/8
115 /16
2
21/8
17-15I-14MP Adapter feMale
by S-Line (L14AM)
Size
1
11/2
2
21/2
3
4
A
19 /32
21/32
21/8
21/4
25 /16
27/16
17-14I-15I
Adapter Male by FeMale
Size
True 1
1
11/2
2
21/2
3
4
A
15 /8
111/32
121/32
113 /16
131/32
23 /32
211/32
21FI-14I
Adapter Male By Male NPT
Size
1 x 1/2
1 x 3 /4
1x1
11/2 x 11/4
11/2 x 11/2
2x2
21/2 x 21/2
3x3
4x4
8" available on Special Order. Other configurations on request.
A
211/32
211/32
21/4
27/8
23 /16
29 /16
227/2
3 3 /32
31/4
WCB-Flow Products
Fittings and Clamps
I-Line Adapters
21I-15I
Adapter FeMale By Male NPT
Size
1 x 1/2
1 x 3 /4
1x1
11/2 x 11/4
11/2 x 11/2
2x2
21/2 x 21/2
3x3
4x4
No. 7 polish only. All dimensions are in inches.
22FI-14I
Adapter Male By feMale NPT
A
2 /32
217/32
27/16
31/16
23 /8
29 /16
3 5 /32
313 /32
3 9 /16
17
I-Line Reducers
31I-14FI Concentric reducer
Both Ends Male
Size
11/2 x 1
2 x 11/2
21/2 x 2
3x2
3 x 21/2
4x3
A
3 5 /16
31/4
3 3 /8
411/16
4 3 /4
429 /32
28AI Lateral All Ends Male
Size
1
11/2
2
21/2
3
4
6
A
79 /16
91/4
1011/16
127/16
13 3 /16
151/2
191/8
B
5 23 /32
71/8
8 5/32
921/32
10 3 /32
123 /32
15 5 /8
Size
1 x 1/2
1 x 3 /4
1x1
11/2 x 11/4
11/2 x 11/2
2x2
21/2 x 21/2
3x3
4x4
A
2 /32
219 /32
17/8
31/4
127/32
129 /32
29 /32
215 /32
25 /8
15
22FI-15I
Adapter feMale By feMale NPT
Size
1 x 1/2
1 x 3 /4
1x1
11/2 x 11/4
11/2 x 11/2
2x2
21/2 x 21/2
3x3
4x4
A
2 /32
225 /32
21/16
37/16
21/32
23 /16
219 /32
225 /32
215 /32
21
No. 7 polish only. All dimensions are in inches.
31I-15FI Concentric reducer
Large End Male,
Other End Female
Size
11/2 x 1
2 x 11/2
21/2 x 2
3x2
3 x 21/2
4x3
A
31/8
3 3 /32
3 9 /32
5 3 /8
37/16
5 21/32
28BI true y All Ends Male
Size
1
11/2
2
21/2
3
4
6
8" available on Special Order. Other configurations on request.
A
3 25 /32
315 /16
51/32
5 5 /32
77/32
911/32
91/8
37
WCB-Flow Products
Fittings and Clamps
I-Line Clamps
Rugged and dependable, designed for heavy duty applications and built to last. Made from cast 304
stainless steel in three basic styles. See page 03 for Ordering Information.
13IS
13I
Wingnut Tightened Clamp
Available in 1"-4" sizes
13IU
Bolted, Unpolished Clamp
Available in 1"-8"
(6"-8" has two bolt connection)
Bolted Clamp
Available in 1"-6"
(6" has two bolt connection)
Pressure Ratings: I-Line Clamped Unions
Clamp
Tube O.D.
Heavy Duty
13I, 13IU & 13IS
P.S.I. Service Rating
11/2"
2"
Temp.
1"
@ 70°F
1220
1220
@ 250°F
1100
1100
21/2"
3"
4"
6"
900
720
600
570
830
660
550
525
150
75
*6" available in 13I and 13IU only.
gaskets
WCB-Flow Products Sanitary I-Line Gaskets are available in a variety of materials that are non-toxic and resistant to contact media.
Information on general service characteristics of gasket materials
will be furnished upon request.
Part Description
Material
Sizes Available
40IH
40IV
40IE
40IT
40IX
BUNA
VITON
EPDM
TEFLON
SILICONE
1"-8"
1"-8"
1"-8"
1"-8"
1"-8"
WCB-Flow Products I-line gaskets are specially designed to not extrude into the interior diameter of the
tubing when the clamp is tightened.
38
8" available on Special Order. Other configurations on request.
WCB-Flow Products
Fittings and Clamps
Bevel Seat Fittings
WCB-Flow Products Bevel Seat Fittings are precision engineered and manufactured from stainless steel. Bevel Seat
connections are made up of a plain bevel ferrule mating to a
threaded bevel ferrule with a threaded hex nut. These fittings
are designed and manufactured to withstand daily disassembly,
COP (clean-out-of-place), and reassembly of process lines and
equipment. A gasket can be used to ensure a positive shutoff
under higher pressures, however is not necessary in lower pressure applications.
•
•
•
•
•
•
•
Available in 1” through 4”
Fittings are made of T304 & T316L stainless steel.
Finishes are available in any standard combination.
ID polish is 32 Ra
OD polish is 32 Ra
Gaskets offered in Buna as a standard.
Meets 3A requirements
Bevel Seat Elbows
2C 90° SWEEP ELL
Size
1
11/2
2
21/2
3
4
All dimensions are in inches, No. 7 Sanitary Finish.
2E 90° SWEEP ELL
A
2
215 /16
3 23 /32
427/32
5 29 /32
81/16
Size
1
11/2
2
21/2
3
4
A
2
215 /16
3 23 /32
427/32
5 29 /32
81/16
39
WCB-Flow Products
Fittings and Clamps
Bevel Seat Elbows
All dimensions are in inches, No. 7 Sanitary Polish.
2F 90° SWEEP ELL
Size
1
11/2
2
21/2
3
4
2F-31 90 ° concentric
Reducing elbow
(non-tapered)
40
A
21/16
21/8
27/8
229 /32
3 21/32
217/78
231/32
3 23 /32
415 /32
25 /16
31/16
313 /16
4 9 /16
5 5 /16
B
23 /16
23 /16
215 /16
215 /16
3 23 /32
23 /16
215 /16
3 23 /32
419 /32
23 /16
215 /16
3 23 /32
3 3 /4
57/16
2f-32 90 ° Eccentric
Reducing elbow
(non-tapered)
2P 45° ELL
2K 45 ° Elbow
Size
1
11/2
2
21/2
3
4
Size
11/2 X 1
2 X1
2 X 11/2
21/2 X 11/2
21/2 X 2
3 X1
3 X 11/2
3 X2
3 X 21/2
4 X1
4 X 11/2
4 X2
4 X 21/2
4 X3
A
2
215 /16
3 23 /32
427/32
5 29 /32
81/16
A
15 /16
123 /32
21/8
25 /8
31/8
41/4
Size
1
11/2
2
21/2
3
4
A
15 /16
123 /32
21/8
25 /8
31/8
41/4
B
21/8
21/8
25 /16
29 /16
229 /32
37/8
WCB-Flow Products
Fittings and Clamps
bevel seat tees & crosses
7A & 7B TEE
Size
1
11/2
2
21/2
3
4
A
113 /16
211/32
225 /32
3 3 /16
317/32
421/32
B
3 5 /8
411/16
5 9 /16
6 3 /8
71/16
9 5 /16
C
211/16
313 /32
313 /16
41/4
4 5 /8
61/8
7A TEE
7B TEE
9 CROSS & 7 - TEE
Size
1
11/2
2
21/2
3
4
A
1 /16
211/32
225 /32
3 3 /16
317/32
421/32
B
3 5 /8
411/16
5 9 /16
6 3 /8
71/16
9 5 /16
13
9 CROSS
7 TEE
9A CROSS
Size
1
11/2
2
21/2
3
4
A
113 /16
23 /8
225 /32
3 3 /16
31/2
421/32
B
3 5 /8
43 /4
5 9 /16
6 3 /8
7
9 5 /16
C
211/16
313 /32
313 /16
41/4
4 5 /8
61/8
D
41/2
5 25 /32
619 /32
77/16
81/8
1025 /32
Can be supplied with more than one end having a
captive nut.
41
WCB-Flow Products
Fittings and Clamps
Bevel Seat Ferrules
14 FERRULE PLAIN RECESSED
Size
A
3
1
/4
7
11/2
/8
31
2
/32
21/2
11/16
3
11/8
4
11/4
14A FERRULE Plain
Size
1
11/2
2
21/2
3
4
42
A
13 /8
11/2
11/2
13 /4
13 /4
13 /4
All dimensions are in inches.
14R FERRULE Plain Roll-On
Size
1
11/2
2
21/2
3
4
A
/4
1
1
1
1
1
3
14PRF FERRULE Short welding
Size
1
11/2
2
21/2
3
4
A
/16
11
/16
23
/32
27
/32
15
/16
1
11
WCB-Flow Products
Fittings and Clamps
Bevel Seat adapters
14W Plain ferrule tank
spud (heavY)
Size
1
11/2
2
21/2
3
4
A
23 /8
217/32
225 /32
31/16
317/32
4 5 /16
B
15 /32
121/32
23 /16
211/16
37/32
41/4
14WL Plain ferrule Tank
Spud (Light)
Size
1
11/2
2
21/2
3
4
A
2
21/4
21/2
23 /4
3
4
All dimensions are in inches, No. 7 Sanitary Polish.
14AHR Rubber Hose Adapter
Size
1
11/2
2
21/2
3
4
A
17/8
17/8
217/32
211/16
317/32
3 25 /32
14AHT Tygon hose adapter
Size
1
11/2
2
21/2
3
4
A
4 /16
423 /32
423 /32
427/32
429 /32
57/32
11
43
WCB-Flow Products
Fittings and Clamps
Bevel Seat Ferrules
15 Threaded Recessed Ferrule
Size
1
11/2
2
21/2
3
4
A
13
/16
7
/8
11/32
11/8
11/4
13 /8
15A Threaded Tube Ferrule
Size
1
11/2
2
21/2
3
4
44
A
13 /8
11/2
11/2
13 /4
13 /4
13 /4
All dimensions are in inches, No. 7 Sanitary Polish.
15R Threaded Roll-On Ferrule
Size
1
11/2
2
21/2
3
4
A
/16
1
11/8
11/8
11/8
11/8
13
15TRF Threaded Ferrule, short
Welding
Size
1
11/2
2
21/2
3
4
A
/16
11
/16
23
/32
27
/32
15
/16
1
11
WCB-Flow Products
Fittings and Clamps
Bevel Seat Ferrules and Adapters
All dimensions are in inches, No. 7 Sanitary Polish.
15W threaded ferrule,
tank spud (heavy)
Size
1
11/2
2
21/2
3
4
A
11/2
15 /8
13 /4
13 /4
113 /16
21/8
B
11/4
13 /4
25 /16
27/8
3 3 /8
41/4
15WL Threaded Ferrule
Tank Spud (Light)
Size
1
11/2
2
21/2
3
4
A
2
21/4
21/2
23 /4
3
4
15AHR Rubber Hose Adapter
Size
1
11/2
2
21/2
3
4
A
17/8
17/8
217/32
211/16
317/32
3 25 /32
15AHT Tygon HOse adapter
Size
1
11/2
2
21/2
3
4
A
4 /16
423 /32
423 /32
427/32
429 /32
57/32
11
Bevel Seat Caps
23B THERMOMETER CAP
16A CAP
Size
1
11/2
2
21/2
3
4
Size
1
11/2
2
21/2
3
4
A
115 /16
127/32
23 /8
229 /32
37/16
41/2
A
15 /16
127/32
23 /8
229 /32
37/16
41/2
1" tapped 1/2" NPT other sizes are tapped 3/4"
NPT.
45
WCB-Flow Products
Fittings and Clamps
bevel seat tube assemblies
TUBE ASSEMBLIES
Size
1
11/2
2
21/2
3
4
NO. 17C NO. 17D NO. 17E
13 /8
27/8
27/8
17/16
31/8
31/8
17/16
3 3 /8
3 3 /8
111/16
3 3 /4
3 3 /4
113 /16
37/8
37/8
27/16
4 5 /8
4 5 /8
17C
NOTE: Minimum lengths
17D
17E
REDUCING TUBE ASSEMBLIES
Size
17F
17G
17H
17K
46
NO. 17F NO. 17G NO.17H NO. 17K
11/2 x 1
13 /8
13 /8
3 3 /32
7
7
2x1
1 /16
1 /16
3 9 /32
1
15
15
2 x 1 /2
1 /32
1 /32
3 3 /8
1
15
15
2 /2 x 1
1 /32
1 /32
3 9 /16
1
1
1
1
2 /2 x 1 /2
1 /2
1 /2
3 21/32
1
1
1
2 /2 x 2
1 /2
1 /2
3 21/32
17
17
3x1
1 /32
1 /32
3 25 /32
1
9
9
3 x 1 /2
1 /16
1 /16
37/8
9
9
3x2
1 /16
1 /16
37/8
1
11
11
3 x 2 /2
1 /16
1 /16
3 29 /32
5
5
4x1
1 /8
1 /8
4 9 /32
1
21
21
4 x 1 /2
1 /32
1 /32
4 3 /8
21
21
4x2
1 /32
1 /32
4 3 /8
1
25
25
4 x 2 /2
1 /32
1 /32
413 /32
27
27
4x3
1 /32
1 /32
47/16
NOTE: Minimum lengths
4 5 /16
51/8
51/8
511/16
511/16
511/16
6 3 /16
6 3 /16
6 3 /16
6 3 /16
81/8
81/8
81/8
81/8
81/8
WCB-Flow Products
Fittings and Clamps
Bevel Seat Ferrules and Adapters
All dimensions are in inches, No. 7 Sanitary Polish.
21-14 14W & Nut to male NPT
adapter
21 Threaded 15W ferrule
to male npt adapter
Size
1
11/2
2
21/2
3
4
Size
1
11/2
2
21/2
3
4
A
21/4
27/16
221/32
3 9 /32
31/2
313 /16
22-14 14W & Nut to FEmale
NPT adapter
22 Female NPT to
15TRF adapter
Size
1
11/2
2
21/2
3
4
A
229 /32
215 /16
3
3 5/8
4 5 /32
417/32
Size
1
11/2
2
21/2
3
4
A
1 /16
113 /16
115 /16
27/16
25 /8
3
13
A
21/2
213 /16
223 /32
31/4
3 27/32
47/32
Bevel Seat Wrenches
wrenches (aluminum)
Part No.
79-1
79-2
79-3
79-4
79-5
79-6
79-10
79-7
79-12
79-8
79-9
Description
25H Wrench - Hex Union Nut - 1"
25H Wrench - Hex Union Nut - 11/2"
25H Wrench - Hex Union Nut - 2"
25H Wrench - Hex Union Nut - 21/2"
25H Wrench - Hex Union Nut - 3"
25H Wrench - Hex Union Nut - 4"
25HA Wrench - Double End - 11/2" x 1"
25HA Wrench - Double End - 2" x 11/2"
25HA Wrench - Double End - 2" x 3"
W25HX Wrench - Pocket Size - 11/2"
W25HX Wrench - Pocket Size - 2"
25A
25HA
W25HX
47
WCB-Flow Products
Fittings and Clamps
Bevel Seat Nuts
13H Union Nut, HEX
Size
1
11/2
2
21/2
3
4
A
113 /16
213 /32
3
319 /32
43 /16
57/16
B
/32
31
/32
11/16
13 /16
19 /32
21/2
29
bevel seat reducing elbows, laterals & true wyes
28A LATERAL WYE
Size
1
11/2
2
21/2
3
4
48
A
73 /8
8 3 /4
10 9 /32
1125 /32
125 /8
1413 /16
B
511/16
67/8
727/32
911/32
913 /16
113 /4
C
111/16
17/8
27/16
27/16
213 /16
31/16
D
511/16
67/8
727/32
911/32
913 /16
113 /4
28B TRUE Y
Size
1
11/2
2
21/2
3
4
A
311/16
3 23 /32
423 /32
5 27/32
6 29 /32
97/32
WCB-Flow Products
Fittings and Clamps
bevel seat reducers
32-14F CONCENTRIC & ECCENTRIC
ADAPTER REDUCER
31-14F CONCENTRIC & ECCENTRIC
ADAPTER REDUCER
Size
11/2 x 1
2x1
2 x 11/2
21/2 x 11/2
21/2 x 2
3 x 11/2
3x2
3 x 21/2
4 x 21/2
4x3
Size
11/2 x 1
2x1
2 x 11/2
21/2 x 11/2
21/2 x 2
3 x 11/2
3x2
3 x 21/2
4 x 21/2
4x3
A
43 /4
425 /32
47/16
429 /32
415 /16
61/4
6 9 /32
613 /32
615 /32
6 9 /16
A
411/32
611/32
47/16
6 9 /16
43 /4
8 5 /8
613 /16
51/16
9 3 /8
717/32
31-15F CONCENTRIC &
32-15F ECCENTRIC REDUCER ADAPTER
Size
11/2 x 1
2x1
2 x 11/2
21/2 x 11/2
21/2 x 2
3 x 11/2
3x2
3 x 21/2
4 x 21/2
4x3
A
313 /32
513 /32
37/16
5 9 /16
3 9 /16
75 /8
5 5 /8
3 3 /4
81/16
61/8
31-15F
32-15F
49
WCB-Flow Products
Fittings and Clamps
31-18F REDUCER ADAPTER
(Sanitary Plain Ferrule hex nut to female NPT)
Size
11/2 x 1
2x1
2 x 11/2
21/2 x 11/2
21/2 x 2
3x2
3 x 21/2
4 x 21/2
4x3
A
41/16
61/16
411/32
615 /32
4 3 /8
67/16
427/32
9 5 /32
713 /32
31-19F REDUCER ADAPTER
(Sanitary Plain Ferrule to male NPT)
Size
11/2 x 1*
2x1
2 x 11/2
21/2 x 11/2
21/2 x 2 *
3x2
3 x 21/2*
4 x 21/2
4x3
A
415 /32
615 /32
415 /32
619 /32
421/32
6 23 /32
57/32
917/32
723 /32
* Hex nuts supplied on these sizes.
31TP ADAPTER - REDUCER (CONCENTRIC)
32TP ADAPTER - REDUCER (ECCENTRIC)
31 TP
Size
11/2 x 1
2x1
2 x 11/2
21/2 x 11/2
21/2 x 2
3 x 11/2
3x2
3 x 21/2
4 x 21/2
4x3
A
411/32
611/32
47/16
6 9 /16
43 /4
8 5 /8
613 /16
51/16
9 3 /8
717/32
32 TP
31 TT ADAPTER - REDUCER (CONCENTRIC)
32 TT ADAPTER - REDUCER (ECCENTRIC)
31 TT
50
Size
11/2 x 1
2x1
2 x 11/2
21/2 x 11/2
21/2 x 2
3 x 11/2
3x2
3 x 21/2
4 x 21/2
4x3
A
3 3 /8
513 /32
313 /32
517/32
3 9 /16
75 /8
5 21/32
3 25 /32
727/32
515 /16
32 TT
WCB-Flow Products
Fittings and Clamps
Q-Line Fittings
All dimensions are in inches.
WCB-Flow Products Q-Line Quick Clamp
fittings are a more robust version of the S-Line.
With thicker, beefier ferrules, Q-Line fittings are
ideal for rough environments.
The face-to-face design and quick disconnect
clamp allow easy line assembly or dismantling.
Q-LINE ELBOWS
2CQ 90 DEGREE
Size
1
11/2
2
21/2
3
4
2kq 45 DEGREE
A
21/32
213 /16
313 /16
411/16
57/16
7
Size
1
11/2
2
21/2
3
4
A
15 /32
11/2
21/16
21/2
213 /16
3 29 /32
51
WCB-Flow Products
Fittings and Clamps
q-line tees & hose ferrules
7XQ TEE
7Q TEE
Size
1
11/2
2
21/2
3
4
A
23 /8
23 /4
31/2
31/2
3 3 /4
4 5 /16
B
4 3 /4
51/2
7
7
71/2
8 5 /8
14HRQ RUBBER HOSE BARB
Size
1
11/2
2
21/2
3
4
52
A
123 /32
13 /4
25 /8
125 /32
317/32
3 25 /32
Size
1
11/2
2
21/2
3
4
A
21/32
213 /16
313 /16
411/16
57/16
7
B
41/16
5 5 /8
75 /8
9 3 /8
107/8
14
14HTQ TYGON HOSE ADAPTER
Size
1
11/2
2
21/2
3
4
A
4
41/8
417/32
429 /32
5 3 /32
5 3 /32
WCB-Flow Products
Fittings and Clamps
Q-Line ROLL ON & WELD FERRULES
14RQ - UNION FERRULE
Size
1
11/2
2
21/2
3
4
A
/16
11
/16
7
/8
1
1
1
11
14WLQ Welding ferrule
Light Wall, Long Shank
Size
A
1
13 /4
1
1 /2
21/32
2
25 /16
1
2 /2
21/2
3
211/16
4
3
14WQ Welding ferrule
Short Shank
Size
1
11/2
2
21/2
3
4
A
/32
9
/16
13
/16
15
/16
15
/16
1
17
14WHQ Welding ferrule
Heavy Wall
Size
1
11/2
2
21/2
3
4
A
11/2
15 /8
13 /4
13 /4
113 /16
21/8
B
11/4
111/16
21/4
23 /4
3 5 /16
41/4
53
WCB-Flow Products
Fittings and Clamps
Q-Line Caps & PIPE ADAPTERS
16AQSG Transparent Cap
Sight glass for tee or cross
16AQ-14Q Solid Cap Only
Size
1
11/2
2
21/2
3
4
All dimensions are in inches.
A
2
2
25 /8
3 5 /16
37/8
47/8
Size
1
11/2
2
21/2
3
4
A
2
2
25 /8
3 5 /16
37/8
47/8
Acrylic. maximum temperature rating: 195 °F
22Q ADAPTER
21Q ADAPTER
Size
1
11/2
2
21/2
3
Size
1
11/2
2
21/2
3
A
29 /32
25 /16
25 /8
31/4
37/16
A
129 /32
131/32
21/4
211/16
213 /16
Q-Line THERMOMETER CAP & REDUCERS
23BQ Thermometer Ferrule 31Q-14FQ CONCENTRIC REDUCER 32Q-14FQ ECCENTRIC REDUCER
Size
A
Size
A
I.P. Threaded
Size
1
11/2
2
21/2
3
4
A
2
2
25 /8
3 5 /16
37/8
47/8
1" tapped 1/2" NPT, 11/2"" thru 4" tapped 3/4" NPT.
54
11/2 x 1
2 x 11/2
21/2 x 11/2
21/2 x 2
3x2
3 x 21/2
4 x 21/2
4x3
315 /32
3 3 /4
37/8
41/8
5 3 /8
51/2
5 9 /16
5 9 /16
11/2 x 1
2 x 11/2
21/2 x 11/2
21/2 x 2
3x2
3 x 21/2
4 x 21/2
4x3
3 3 /32
3 3 /8
51/2
3 3 /4
5 3 /4
37/8
715 /16
515 /16
WCB-Flow Products
Fittings and Clamps
Q-Line Clamps
All dimensions are in inches.
Rugged and dependable, designed for heavy duty applications and built to last. Made from cast 304 stainless steel in three basic styles,
See page 03 for Ordering Information.
13IS
13I
Wingnut Tightened Clamp
Available in 1"-4" sizes
13QT
Bolted Clamp
Available in 1"-6"
(6" has two bolt connection)
Hinged, 3-Piece Clamp
For light duty applications
Adjusting, latch screw closure 1"-4"
See page 49 Pressure Ratings for 13IS and 13I Clamps
See page 03 for Clamp Ordering Information
Pressure Ratings: I-Line Clamped Unions
P.S.I. Service Rating
Tube O.D.
1"
11/2"
2"
21/2"
3"
4"
Clamp
Temp.
Heavy Duty
@ 70°F
500
500
450
400
350
200
13I, 13IU &
@ 250°F
250
250
250
200
150
125
13IS
*13I and 13IU only. Shown on page 38.
@ 70°F
150
150
150
150
150
100
Lightweight
@ 250°F
125
125
125
125
125
75
13QT
6"
*
*
Service Ratings are based on hydrostatic tests using standard elastomer gaskets, properly assembled joints, and no shock pressure.
Please refer to PTFE statement.
Q-Line Gaskets
All dimensions are in inches.
For quick Clamp Fittings
Part Description
40QH
40QS
40QT
Material
Size Available
BUNA
Silicone
Teflon ®
1"-4"
1"-4"
1"-4"
55
WCB-Flow Products
Fittings and Clamps
I.P.S. Schedule Fittings
I.P.S. (International Pipe Size) Available in schedules 5 and 10, as standard, other wall thicknesses upon request WCB-Flow
Products offer these in S-Line and I-Line.
I.P.S. S-Line
•
Sizes 1" - 6"
•
Available in 304 and 316L
•
Standard Finish unpolished
S-Line Ferrules
14WMP-5 FERRULE
SIZE
1
11/2
2
21/2
3
4
6
L14AM7V
A
1.944
2.516
3.047
3.579
4.125
5.125
7.188
B
1.315
1.9
2.375
2.875
3.5
4.5
6.625
C
1
/2
1
/2
1
/2
1
/2
1
/2
5
/8
5
/8
A
1.944
2.516
3.047
3.579
4.125
5.125
7.188
B
1.315
1.9
2.375
2.875
3.5
4.5
6.625
C
3
3
3
4
4
4
6
14WLMPV
SIZE
1
11/2
2
21/2
3
4
6
56
SIZE
1
11/2
2
21/2
3
4
6
A
1.944
2.516
3.047
3.579
4.125
5.125
7.188
B
1.315
1.9
2.375
2.875
3.5
4.5
6.625
C
11/8
11/8
11/8
11/8
11/8
11/8
11/2
16AMPV
Size
1
11/2
2
21/2
3
4
6
A
1.944
2.516
3.047
3.579
4.125
5.125
7.188
WCB-Flow Products
Fittings and Clamps
S-Line Gaskets
Available in standard, flanged, teflon envelope and in various elastomers, P/N 40 MPV (Identify elastomer).
S-Line Adapters
See Miscellaneous section - "IPS Adapters" (Page 63)
S-Line Clamps
PIPE SIZE
DESCRIPTION
PART NUMBER
DIMENSION (A)
1
13MHHM-5 1"
119-28
2.122
1 1/2
13MHHM-5 1 1/2"
119-30
2.654
2
13MHHM-5 2"
119-33
3.185
2 1/2
13MHHM-5 2 1/2"
119-34
3.717
3
13MHHM-5 3"
119-51
4.263
4
13MHHM-5 4"
119-87
5.263
6
13MHHM-5 6"
119-123
7.230
NOTE: Sizing, for 1" > 2 1/2" use next larger nominal tube O.D. S-Line clamp
(i.e. use 2" 13MHHM for 1 1/2" IPS ferrule)
I.P.S. I-Line
•
Sizes 1" - 4"
•
Availalbe in 304 and 316L
•
Standard Finish 32Ra
I-Line Ferrules
15WI-5 FERRULE
14WI-5 FERRULE
Size
1
11/2
2
21/2
3
4
A
/32
11
/16
11
/16
27
/32
1
11/32
19
B
1.315
1.9
2.375
2.875
3.5
4.5
Size
1
11/2
2
21/2
3
4
A
/32
15
/16
11/8
15 /32
15 /16
111/32
25
B
1.315
1.9
2.375
2.875
3.5
4.5
57
WCB-Flow Products
Fittings and Clamps
I-Line Caps
16AI-14I-5 & 16AI-15I-5
Size
1
11/2
2
21/2
3
4
A
2
15 /8
3 5 /16
37/8
47/8
57/8
16AI-15I-5
16AI-14I-5
I-Line Gaskets
Available in various elastomers, P/N 40I_-5 (_= identify elastomer) (i.e. 40IT05=Teflon, 40IH=BUNA, 40IV-VITON)
I-Line Clamps
PIPE SIZE
DESCRIPTION
PART NUMBER
DIMENSION (A)
1
13I-5 1"
042223
2.125
1 1/2
13I-5 1 1/2"
0343223
2.813
2
13I-5 2"
0344223
3.498
2 1/2
13I-5 2 1/2"
0345223
4.062
3
13I-5 3"
0346223
5.000
4
13I-5 4"
0546223
6.000
NOTE: Sizing, for 1" > 3" use next larger nominal tube O.D. I-Line clamp
(i.e. use 2" 13I for 1 1/2" IPS ferrule)
58
WCB-Flow Products
Fittings and Clamps
Hangers: HEX HANGERS (304 SS)
“TH” MODEL PIPE HANGER
“THP” MODEL PIPE HANGER
O.D. Tubing Size Hex Hangers in T-304 S.S. with
BUNA grommets. Fluorocarbon Rubber (VITON1)
grommets are also available as
“TH-V”. See note below on Application Temperature.
The “THP” line utilizes a split Polypropylene collar that
is held in place by the S.S. frame, thereby preventing it
from being pulled out.
This hanger is available in sizes 1" through 4".
Size
1
11/2
2
21/2
3
4
6
A
THT HP
13
9
/16
/16
13
13
/16
/16
11/16
11/16
15 /16
15 /16
9
1 /16
19 /16
1
2 /16
21/16
1
3 /16
31/16
Material
8GA x 1"
8GA x 1"
8GA x 1"
8GA x 1"
8GA x 1"
8GA x 1"
8GA x 2"
Typical Unfilled Polypropylene:
Melt Temperature 320°F (160°C)
Deflection Temperature (@264 psi) 120°F
Deflection Temperature (@66 psi) 225°F
All dimensions are in inches.
Ordering Information: Hangers
When ordering please specify
Blank: O.D. Tube Size
SCH5: Pipe (where
available)
*Model
Size
TH
26LC
Refer to the
TH-V
K24FCF
appropriate tables
TH-P
K24FCV
for available sizes
26CB
K24FCA
for the K24 Series
26CB-V
Hangers.
Note on Application Temperature:
BUNA: Max. Temperature 250°F
VITON: Max. Temperature 400°F
59
WCB-Flow Products
Fittings and Clamps
Hangers: Quick Connect/Disconnect hangers (304SS) with Rubber Inserts
26CB - Hanger
O.D. Tubing Size Hanger with a split EPDM insert
attachable via a wing nut. VITON inserts are also
available as “26CB-V”.
Refer to Application temperature in Ordering Information.
SizeI.D.
1 Tube
1
11/2 Tube
11/2
2 Tube
2
21/2 Tube
21/2
3 Tube
3
4 Tube
4
A
B
C
3 31/32
15/16
5
413 /6
17/8
61/2
51/2
23/8
8
K24FCF - Hanger
For take down Piping
For tubing or pipe. Please specify. BUNA inserts
are standard. Fluorocarbon Rubber (Viton1) is also
available as “K24FCV” please specify. For the S.S.
bracket alone, specify K24FC A. Refer to Application
temperature in Ordering Information.
Size
1
11/2
2
TUBE O.D.
21/2
3
4
6
1" Pipe
11/2" Pipe
2" Pipe
PIPE
21/2" Pipe
A
17/8
17/8
17/8
21/2
21/
31/2
41/2
17/8
17/8
21/2
21/2
B
41/8
41/8
41/8
41/2
41/2
57/8
6 3 /4
41/8
41/8
41/2
41/2
3" Pipe 31/2
4" Pipe 31/2
57/8
57/8
* Please specify either O.D. Tube or Pipe
“26LC” MODEL MINI-PIPE HANGER
For fractional tubing 1/2" and 3/4" with a
BUNA Gasket. T-304 SS. 211/16 wide by 3/4". Refer
to Application temperature in Ordering Information.
60
WCB-Flow Products
Fittings and Clamps
Miscellaneous Fittings
Flange aDapters
•
Available in 304, 316L and higher alloys
•
Sizes 1/2" - 8"
•
Standard Finish unpolished
•
Other finishes and configurations available upon request
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
A
B
31/2
23 /8
37/8
23 /4
1
4 /4
31/8
5
37/8
6
4 3 /4
7
51/2
1
4 /2
6
9
71/2
11
91/2
1
8
13 /2
113 /4
C
19 /16
15 /8
111/16
113 /16
17/8
2
21/16
21/16
21/2
25 /8
"CAMlock" style fittings
•
Available in 316
•
Sizes 1/2" - 6"
•
Standard Finish 32Ra
12A, 12C, 12E
QUICK DISCONNECT
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
A
29
3 /64
3 61/64
4 5 /64
511/32
5 57/64
6 21/64
649 /64
71/8
97/8
All adapters have a 32Ra finish.
12A
12C
12E
61
WCB-Flow Products
Fittings and Clamps
"CAMLOCK" style fittings
12B CLAMP, 12D HOSE, 12F WELD
X QUICK DISCONNECT COUPLER
Size
A
B
C
D
1
/2
313 /64
11/4
.0370
13 /4
3
/4
3 25 /32
123 /64
.0620
21/8
55
19
1
3 /64
1 /32
.0870
27/16
1
63
29
1 /2
4 /64
2 /32
1.370
3 5 /16
1
7
2
5 /2
2 /64
1.870
3 3 /4
1
1
11
2 /2
6 /32
2 /64
2.370
4 5 /16
25
5
3
6 /64
2 /16
2.870
57/16
49
7
4
6 /64
2 /16
3.834
61/2
27
41
6
9 /64
2 /64
5.782
91/4
All couplers have a 32Ra finish of shank, buffed
coupler section.
12DC QUICK DISCONNECT CAP
Size
A
1
/2
11/4
3
/4
11/4
1
111/16
11/2
2
2
3
21/2
31/16
3
31/4
4
25 /8
6
311/16
32Ra finished I.D., buffed O.D.
62
12DP QUICK DISCONNECT PLUG
Size
1
/2
3
/4
1
11/2
2
21/2
3
4
6
32Ra finished I.D. and O.D.
A
11/32
11/8
11/4
13 /4
21/16
17/8
21/8
23 /8
25 /8
WCB-Flow Products
Fittings and Clamps
pipe to tube adapters
Drawings for reference purposes only, reducers can vary greatly. The table is only a sampling of available reducers.
•
Available in 304, 316L and higher alloys.
•
IPS schedules 5 and 10 are standard.
•
32RA machine finish is standard.
•
We can provide custom finishes, reductions, lengths, walls, and ferrule ends upon request.
S-LINE X IPS B/W
S-LINEIPS
1
1
/2
/2
3
3
/4
/4
1
1
11/2
11/2
2
2
21/2
21/2
3
3
4
4
6
6
8
8
A
21/2
11/2
11/8
11/8
11/8
11/8
21/2
11/8
3
21/2
B
0.84
1.05
1.315
1.9
2.375
2.875
3.5
4.5
6.625
8.625
TUBE OD BW X IPS B/W
TUBE ODIPS
1
1
/2
/2
3
3
/4
/4
1
1
11/2
11/2
2
2
21/2
21/2
3
3
4
4
6
6
A
11/2
11/2
11/8
11/8
11/8
11/8
21/2
11/8
3
B
0.84
1.05
1.315
1.9
2.375
2.875
3.5
4.5
6.625
C
/2
3
/4
1
11/2
2
21/2
3
4
6
1
63
WCB-Flow Products
Fittings and Clamps
john perry fittings
•
Availalbe in 304 and 316L
•
Sizes 1" - 4"
•
Standard Finish 32Ra
•
Other finishes and configuration available upon request
john perry nuts, Gaskets, CAPS
JP13H Union Nut, HEx
Size
1
11/2
2
21/2
3
4
A
1 /16
213 /32
3
319 /32
43 /16
57/16
13
JP40 - GASKET*
JP16A - CAP
B
/32
31
/32
11/16
13 /16
19 /32
21/2
29
Size
1
11/2
2
21/2
3
4
A
/32
31
/32
1
/16
13 /16
19 /32
21/2
29
Size
1
11/2
2
21/2
3
4
A
13 /16
127/32
23 /8
227/32
3 3 /8
43 /8
B
11/8
121/32
23 /16
221/32
3 3 /16
4 3 /16
*Available in Silicone, BUNA-N, VITON, EPDM, TEFLON
john perry ferrules
JP14A - FERRULE
Size
1
11/2
2
21/2
3
4
A
15 /16
13 /8
13 /8
15 /8
15 /8
15 /8
JP15A - FERRULE
Size
1
11/2
2
21/2
3
4
64
JP14PRF - FERRULE
Size
1
11/2
2
21/2
3
4
A
/32
43
/64
5
/8
25
/32
13
/16
31
/32
21
JP15TRF - FERRULE
A
13 /8
11/2
11/2
13 /4
13 /4
13 /4
Size
1
11/2
2
21/2
3
4
A
/16
23
/32
23
/32
27
/32
29
/32
11/32
11
WCB-Flow Products
Fittings and Clamps
Aseptic fittings
ASEPTIC UNION
SIZE
1
11/2
2
21/2
3
4
A
17/8
21/16
25 /16
27/16
211/16
211/16
B
1
11/2
2
21/2
3
4
C
0.870
1.370
1.870
2.370
2.870
3.834
16NI-141
14WNI - MALE I-LINE FERRULE
Size
1
11/2
2
21/2
3
4
A
/4
27
/32
29
/32
29
/32
11/32
11/32
3
16NI-14I MALE CAP
16NI-15I FEMALE CAP
Size
1
11/2
2
21/2
3
4
A
2
25 /8
3 5 /16
37/8
47/8
57/8
16NI-151
15WNI - FEMALE I-LINE FERRULE
Size
1
11/2
2
21/2
3
4
A
/16
11/32
15 /32
17/32
111/32
111/32
15
65
WCB-Flow Products
Fittings and Clamps
sweep elbows
•
Sizes 1/2" - 6"
•
Tube O.D. , Buttweld ends standard
•
Standard 316 material
•
Polished O.D. and I.D. 32Ra
•
Other finishes and configuration available upon request
•
Required Information to Order:
*
*
*
*
*
*
*
*
Polish Code
Tangent #1 length
Tangent #2 length
CLR - Center Line Radius
Bend Angle
Tube O.D. Size
Tube Material (316)
Connection Type
SWEEP ELBOWS
Std. DIM
12" CLR * 18" CLR* 24" CLR * 36" CLR * 48"CLR *
A
20
26
32
B
8
8
8
C
22.142 26.388 30.627
D
9.172 10.929 12.686
* CLR - Center Line Radius
44
8
39.113
16.201
56
8
47.598
19.716
Spools, Fill ports
Please see Bevel Seat Fittings section starting on page 45.
•
1/2" - 12" nominal ferrule sizes
•
Finishes available, mill to 10Ra electropolished
•
Standard 304 and 316L material
Please, contact factory for available lengths.
17-KW
17-KK
66
WCB-Flow Products
Fittings and Clamps
For liquids with a viscosity and density similar to water. To convert inches vacuum into
feet suction, multiply by 1.13.
1 lb. per sq. in.
= 2.31 feet of head
1 ft. of head
= .43 lbs. per sq. in.
1 U.S. gal. of water
= 8.335 lbs.
1 U.S. gal.
= 231 cu. in.
1 in. of mercury
= .491 lbs. per sq. in.
1 in. of mercury
= 13.60 inches of water
1 cu. ft. of water
= 7.481 U.S. gals.
1 U.S. quart
= 947 c.c.
Stainless Steel Tubing Data
Standard Size
(O.D.) inches
1
11/2
2
21/2
3
4
.031
.077
.143
.229
.336
.600
7.13
17.69 32.96 52.94 77.63 138.5
Gals. water per
ft. of length
Volume in cu. in.
per ft. of length
Friction loss expressed in ft. per fitting
and ft. per foot of stainless steel tubing
O.D. – 1"
I.D. – .870"
Capacity
in U.S.
G.P.M.
Tubing
Elbow
O.D. – 11/2"
I.D. – 1.370"
Tee
Tubing
Elbow
O.D. – 2"
I.D. – 1.870"
Tee
Tubing
Elbow
O.D. – 21/2"
I.D. – 2.370"
Tee
Tubing
Elbow
O.D. – 3"
I.D. – 2.870"
Tee
Tubing
Elbow
O.D. – 4"
I.D. – 3.834"
Tee
2
.01
.01
.08
4
.03
.02
.23
5
.04
.03
.30
10
.14
.7
.47
.02
.01
.12
.005
.015
.1
15
.29
.12
.92
.04
.02
.21
.013
.02
.15
20
.48
.24
1.66
.06
.03
.28
.02
.025
.2
.005
.02
.1
.003
.02
.06
25
.71
.43
2.45
.08
.04
.41
.025
.03
.25
.006
.03
.15
.004
.03
.08
30
1.00
.75
3.56
.11
.07
.59
.035
.05
.3
.008
.05
.2
.005
.04
.1
35
1.29 1.32
5.49
.15
.10
.87
.04
.06
.4
.011
.06
.25
.006
.05
.13
40
.19
.12
1.09
.05
.08
.5
.015
.07
.3
.007
.06
.15
45
.24
.18
1.49 .063
.1
.6
.02
.09
.35
.008
.065
.18
50
.28
.22
1.78 .073
.12
.7
.022
.1
.4
.01
.07
.2
60
.39
.40
2.53
.1
.18
.9
.03
.12
.45
.015
.08
.25
80
.66
.87
4.24
.16
.3
1.5
.05
.15
.55
.02
.1
.4
100
.96
1.52
6.53
.23
.44
2.3
.075
.18
.6
.03
.11
.5
120
1.37
2.38 10.57 .32
.64
3.3
.105
.21
1.0
.04
.13
.6
140
.42
.85
4.5
.14
.23
1.25
.05
.16
.8
160
.54
1.13
5.8
.17
.28
1.6
.07
.2
1.1
180
.67
1.45
7.4
.205
.31
2.0
.08
.21
1.3
200
.81
1.82
9.0
.245
.35
2.5
.1
.26
1.6
220
.95
2.22
11.0
.29
.41
3.0
.12
.3
1.9
240
1.10
2.63 13.5
.34
.48
3.7
.14
.33
2.2
260
.39
.53
4.5
.165
.39
2.5
280
.45
.61
5.3
.19
.42
2.8
300
.515
.7
6.2
.22
.5
3.1
350
.68
1.05
8.5
.28
.67
4.1
400
.86
1.55
11.0
.36
.88
5.2
450
1.05 2.25 13.5
.44
1.1
6.6
500
.54
1.4
8.0
550
.64
1.7
9.5
600
.75
2.05 10.2
650
.87
2.41 13.0
700
1.0
2.8
15.0
750
800
850
900
950
1000
1100
Tubing
Elbow
Tee
.008
.04
.013
.015
.02
.025
.028
.035
.04
.045
.05
.07
.085
.105
.13
.15
.175
.2
.23
.26
.3
.33
.37
.41
.45
.53
.04
.05
.06
.07
.08
.09
.1
.11
.115
.12
.13
.15
.18
.2
.23
.27
.3
.34
.4
.43
.5
.56
.62
.7
.8
1.06
.1
.15
.2
.25
.3
.4
.5
.55
.6
.65
.7
.9
1.2
1.5
1.75
2.1
2.5
2.8
3.4
3.8
4.4
5.0
5.7
6.3
7.0
8.6
67
SPECIALTY PRODUCTS
See Literature Document FH-1870
•Dedicated production cells for faster
lead times
•Digital imaging equipment for quality
validation
•Unique tangents and configurations
•Extensive metal working capabilities
BPE FITTINGS
See Literature Document DS-1601
•Manufactured in accordance to ASME BPE •Electropolished fittings available
standards
•MTR (Material Test Reports) provided
•Available in 1/2” through 6”
with each shipment
•Made of T316L stainless steel. Other alloys •Packaged in resealable bags
available
BUTTERFLY AND BALL VALVES
See Literature Document DS-1230
Butterfly Valves
•Available 1” though 4”
•T304 & 316 construction
•Finishes are 32 Ra ID and OD
•13 position handle
Ball Valves
•Available 1/2” through 4”
•T316 construction
•Finishes are 32 Ra ID
•Meets 3A and FDA requirements
•Comes with standard locking handle
RELATED PRODUCTS
See Literature Document FH-1870
•Offering Rath manufactured tubing in T304
and T316L stainless steel
•Special alloy products in AL6XN and
Hastelloy
•T316 S-Line Clamps
C-SERIES PUMPS
See Literature Document FH-1735
•Value priced pump offering strong
performance
•Easy-cleaning, open type impeller delivers
smooth pumping performance
•Hangers
•Sampling Valves
•Check Valves
•Special Gaskets
•Enlarged inlets available for larger
suction lines
•Standard CIP capability
•Parts are interchangeable with other
C-Series brands
Common Applications: Food, Dairy, Beverage, Pharmaceutical, and Personal Care
Your local contact:
SPX Process Equipment
611 Sugar Creek Road
Delavan, WI 53115
Phone: (262)728-1900 or (800)252-5200 Fax: (262)728-4904 or (800)252-5012
E-mail: wcb@spx.com
For more information about our worldwide locations, approvals, certifications, and local representatives, please visit www.spxpe.com.
SPX Corporation reserves the right to incorporate our latest design and material changes without notice or obligation.
Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing.
Issued: 10/2008 FH-1830
Copyright © 2002, 2008 SPX Corporation
Download