3M Window Films
Glass Check List Form
WF Form
April 2020
3M Glass Check List Form
Installer
Company
Name
Enduser
Contact person
Company
Address
City
ZIP
Country
Phone
Fax
E- mail
3M Window Film
Option 1
Option 2
Please choose a 3M Window Film
Please choose another 3M Window Film
Orientation
Orientation of window
Please choose the type of orientation
Glazing
Type of glazing
Please choose type of glazing
Outer pane:
Please choose
Type
Thickness (mm)?
Middle pane (in case of triple glazing):
Type
Data sheet from glass manufacturer is mandatory!
Thickness (mm)?
Inner pane (in case of double or triple glazing):
Please choose
Type
Thickness (mm)?
Dimensions
Width(mm)?
Heigth (mm)?
Age of windows
Number of windows?
Bitte
Previous glass failure
Pleasewählen
choose
Percentage (%)?
Framing
Type of framing
Framing system condition
Type of sealant
Condition of sealant
Outdoor color of sealant
Bitte
Pleasewählen
choose
Bitte
Pleasewählen
choose Framing type
Please
choose
Bitte
wählen
Bitte wählen
Please
choose type of sealant
Bitte
wählen
Bitte wählen
Please
choose
Bitte wählen
Bitte
wählen
Pleasewählen
choose
Bitte
1/3
3M Window Films
Glass Check List Form
WF Form
April 2020
Indoor structural pocket
Special shape (e.g. round, triangle)
Please choose
Please choose
Inside shading
Type of inside shading
Colour of inside shading
Drapes, blinds - open or closed
Ventilation of indoor shading
Space between glass and shading
Please choose
Please choose
Please choose
Please choose
Please choose
Outside Shading
Vertical
Horizontal
Diagonal
Vertical
Diagonal
75% shading
25% shading
No shading
Radiator/Air conditioning location and other information
Between glass and inner shading
Please choose
Direction of air flow (heating or cooling)
Please choose
Please choose
Average winter temperature
Please choose
Altitude
Adjacent reflecting surface
Please choose
Note: (photos of the facade, framing etc. are welcome)
Comments:
2/3
Horizontal
Diagonal
Vertical
Horizontal
3M Window Films
Glass Check List Form
WF Form
April 2020
Limited Remedy
Unsuitable End Uses
3M recommended product end uses are listed in each 3M graphics product bulletin. End uses not listed
in the applicable 3M Graphics Product Bulletins are typically not eligible for 3M Graphics Warranties. For
non-recommended and/or non-warranted end uses or applications, users must test and approve the end
uses or applications, assume any associated risks, and acknowledge that 3M has no liability for such end
uses or applications. Please contact your 3M representative with any questions about graphic applications,
end uses, and warranties.
Limitations of Liability
All questions of warranty and liability relating to this product are governed by the terms and conditions of
the sale, subject, where applicable, to the prevailing law.
3M Commercial Solutions products are not tested against automotive manufacturer specifications!
3M is a trademark of 3M. All other trademarks are the property of their respective owners.
3M Ireland (Dublin)
The Iveagh Building
The Park, Carrickmines
Dublin 18
Ireland
www.3m.co.uk/graphics-and-signage-uk/
3M United Kingdom PLC
Commercial Solutions Division
Cain Road
Bracknell, RG12 8HT
UK
www.3m.co.uk/graphics-and-signage-uk/
© 3M 2020. All rights reserved.
3/3