3GPP categories and data rates up to Release 15 3G data rates and UE categories 4G data rates and UE categories HSDPA UE categories – 3GPP TS 25.306 Category 3GPP release Maximum number of HS-DSCH codes received 1 5 5G data rates LTE UE categories – 3GPP TS 36.306 Minimum inter-TTI interval Total number of serving/secondary serving HS-DSCH cells Total number of serving/ secondary serving HS-DSCH cells in which MIMO mode can be configured Support for 16QAM in DL Support for 64QAM in DL Theoretical maximum downlink physical data rate in Mbit/s 3 1 0 yes no 1.2 Category 3GPP release Downlink DL data rate in Mbit/s Maximum number of supported layers for spatial multiplexing Support for 256QAM Uplink UL data rate in Mbit/s # of CC Maximum number of supported layers for spatial multiplexing Support for 64QAM 5 3 1 0 1.2 5 2 1 0 1.8 0 Rel. 12 1 1 no 1 1 1 no 1 4 5 2 1 0 1.8 1 Rel. 8 10 1 no 1 5 1 no 1 5 5 1 1 0 3.6 1 bis Rel. 14 10 1 no 1 5 1 no 1 6 5 1 1 0 3.6 2 Rel. 8 51 2 no 1 25 1 no 1 7 10 1 1 0 7.2 3 Rel. 8 102 2 no 1 51 1 no 1 8 10 1 1 0 7.2 4 Rel. 8 150 2 no 1 51 1 no 1 9 15 1 1 0 10.1 5 Rel. 8 299 4 no 1 75 1 yes 1 10 15 1 1 0 13.9 6 Rel. 10 301 2 or 4 no 1 or 2 51 1 no 1 5 2 1 0 5 1 1 0 no yes 13 Rel. 7 15 1 1 0 14 Rel. 7 15 1 1 0 15 Rel. 7 15 1 1 1 (MIMO 2x2) 16 Rel. 7 15 1 1 1 (MIMO 2x2) 17 Rel. 7 15 1 1 18 Rel. 7 15 1 no yes 0.9 7 Rel. 10 301 2 or 4 no 1 or 2 102 1 or 2 no 1 or 2 1.8 8 Rel. 10 2998 8 no 5 1497 4 yes 5 17.6 9 Rel. 11 452 2 or 4 no 2 or 3 51 1 no 1 21.1 10 Rel. 11 452 2 or 4 no 2 or 3 102 1 or 2 no 1 or 2 yes no 23.3 11 Rel. 11 603 2 or 4 optional 2 to 4 51 1 no 1 27.9 12 Rel. 11 603 2 or 4 optional 2 to 4 102 1 or 2 no 1 or 2 0 yes yes 17.6 1 1 (MIMO 2x2) yes no 23.3 1 0 yes yes 21.1 1 1 (MIMO 2x2) yes no 27.9 yes yes 35.2 19 Rel. 7 15 1 1 1 (MIMO 2x2) 20 Rel. 7 15 1 1 1 (MIMO 2x2) 21 Rel. 8 15 1 2 (Dual-Cell) 0 22 Rel. 8 15 1 2 (Dual-Cell) 0 23 Rel. 8 15 1 2 (Dual-Cell) 0 24 Rel. 8 15 1 2 (Dual-Cell) 0 25 Rel. 9 15 1 2 (Dual-Cell) 2 (MIMO 2x2) 26 Rel. 9 15 1 2 (Dual-Cell) 2 (MIMO 2x2) 27 Rel. 9 15 1 2 (Dual-Cell) 2 (MIMO 2x2) 28 Rel. 9 15 1 2 (Dual-Cell) 2 (MIMO 2x2) 42.2 Adjustment to Mbit/s Modulation Number of carriers J LTE UE downlink categories Downlink category 3GPP release Downlink DL data rate in Mbit/s no 23.3 yes yes 35.2 yes no 46.7 55.9 M1 Rel. 13 yes yes 70.5 M2 Rel. 14 84.3 0 LTE UE uplink categories Uplink category Maximum number of supported layers for spatial multiplexing Support for 256QAM 1 1 no 1 M1 Rel. 13 4 1 no 1 M2 Rel. 14 Rel. 12 1 1 no 1 0 Rel. 14 10 1 no 1 1bis 42.2 # of CC 3GPP release Uplink UL data rate in Mbit/s Maximum number Support for of supported 64QAM layers for spatial multiplexing Support for 256QAM # of CC 1 1 no no 1 6 1 no no 1 Rel. 12 1 1 no no 1 Rel. 14 5 1 no no 1 1 3 (Triple-Cell) 0 yes yes 63.2 30 Rel. 10 15 1 3 (Triple-Cell) 3 (MIMO 2x2) yes yes 126.5 4 Rel. 14 150 2 no 1 3 Rel. 12 51 1 no no 1 31 Rel. 10 15 1 4 (Quad-Cell) 0 yes yes 84.3 6 Rel. 12 301 2 or 4 no 1 or 2 5 Rel. 12 75 1 yes no 1 32 Rel. 10 15 1 4 (Quad-Cell) 4 (MIMO 2x2) yes yes 168.7 7 Rel. 12 301 2 or 4 no 1 or 2 7 Rel. 12 102 1 or 2 no no 1 or 2 126.5 9 Rel. 12 452 2 or 4 no 2 or 3 8 Rel. 12 1497 4 yes no 5 Rel. 12 452 2 or 4 no 2 or 3 13 Rel. 12 150 1 or 2 yes no 1 or 2 6 (Hexa-Cell) 0 yes yes 34 Rel. 11 15 1 6 (Hexa-Cell) 6 (MIMO 2x2) yes yes 253.1 10 35 Rel. 11 15 1 8 (Octa-Cell) 0 yes yes 168.7 11 Rel. 12 603 2 or 4 optional 2 to 4 14 Rel. 13 9585 4 yes no 32 36 Rel. 11 15 1 8 (Octa-Cell) 8 (MIMO 2x2) yes yes 337.5 12 Rel. 12 603 2 or 4 optional 2 to 4 15 Rel. 13 226 1 or 2 yes no 2 or 3 37 Rel. 11 15 1 2 (Dual-Cell) 2 (MIMO 4x4) yes yes 168.7 13 Rel. 12 391 2 or 4 mandatory 1 or 2 16 Rel. 14 105 1 yes yes 1 337.5 14 Rel. 12 3916 8 mandatory 5 17 Rel. 14 2119 4 yes yes 5 15 Rel. 12 749 to 798 2 or 4 optional 2 to 5 18 Rel. 14 211 1 or 2 yes yes 1 or 2 16 Rel. 12 978 to 1051 2 or 4 optional 3 to 7 19 Rel. 14 13563 4 yes yes 32 17 Rel. 13 25065 8 mandatory 32 20 Rel. 14 316 1 or 2 yes yes 2 or 3 18 Rel. 13 1174 to 1206 2 or 4 or 8 optional 2 to 8 21 Rel. 14 301 1 or 2 yes no 2 to 4 19 Rel. 13 1566 to 1658 2 or 4 or 8 optional 2 to 11 20 Rel. 14 1948 to 2019 2 or 4 or 8 optional 3 to 13 21 Rel. 14 1348 to 1413 2 or 4 optional 4 to 9 38 Rel. 11 15 1 4 (Quad-Cell) 4 (MIMO 4x4) yes yes HSUPA UE categories – 3GPP TS 25.306 Category Minimum 3GPP release Maximum spreading number of E-DCH codes factor transmitted per transport block 1 1 SF4 Support for 10 ms and 2 ms TTI E-DCH 10 ms Support for 16QAM in UL no Support for Dual Cell 64QAM in UL E-DCH no no UL MIMO no Theoretical maximum uplink physical data rate in Mbit/s 0.7 2 2 SF4 10 ms/2 ms no no no no 1.45/1.40 3 2 SF4 10 ms no no no no 1.4 M2 0 1bis 4 6 M2 0 1bis 5 5 7 9 16 13 18 5 10 11 16 13 18 5 12 13 16 13 15 18 20 3 14 5 7 13 16 18 8 15 17 3 16 5 × Rmax × BW(j), µ N PRB x 12 T µ s × ( 1 – OH (j) ) Number of layers v Subcarrier per RB Numerology µ 0 for FR1 with 15 kHz SCS 1 for FR1 with 30 kHz SCS 2 for FR1 with 60 kHz SCS 3 for FR2 with 60 kHz SCS 4 for FR2 with 120 kHz SCS ( 14 × 2 0 ) 948 × ( 270 × 12 ) × × ( 1 – 0.14 ) = 288.9 Mbit/s 10-3 1024 Average OFDM symbol duration Ts Scaling factor ƒ Max. number of RBs N Overhead OH 270 for FR1 with 15 kHz SCS 273 for FR1 with 30 kHz SCS 135 for FR1 with 60 kHz SCS 264 for FR2 with 60 kHz SCS 264 for FR2 with 120 kHz SCS 0.14 for DL frequency range FR1 0.18 for DL frequency range FR2 0.08 for UL frequency range FR1 0.10 for UL frequency range FR2 J Rmax v Q ƒ NRB Ts Number of aggregated component carriers per band or band combination; max. 16 component carriers for carrier aggregation 948/1024, max. code rate possible Number of layers, max. 8 layers in Rel. 15 Bits per modulation symbol; dependent on modulation scheme. Rel. 15: 1 for BPSK, 2 for QPSK, 4 for 16QAM, 6 for 64QAM and 8 for 256QAM (max. modulation scheme in Rel. 15) Scaling factor (1, 0.8, 0.75 or 0.4), signaled via higher layers Max. number of resource blocks per bandwidth part Average symbol duration, taking into account the longer CP duration of the first OFDMA symbol in one slot and the possible extended cyclic prefix instead of the normal CP length T sµ = 10-3 14 × 2 µ µ Subcarrier spacing: ❙ FR1: 0 for 15 kHz SCS, 1 for 30 kHz SCS, 2 for 60 kHz SCS ❙ FR2: 3 for 60 kHz SCS, 4 for 120 kHz SCS OH Overhead due to signaling information: ❙ downlink: [0.14] for FR1, [0.18] for FR2 ❙ uplink: [0.08] for FR1, [0.10] for FR2 Note: maximum data rate can be limited by UE capability Supported LTE DL/UL category combinations M1 DL category M1 UL category (j) Maximum 5G NR data rate depends on circumstances and higher layer settings: 15 1 × Q ׃ Max. code rate Rmax Data rate = 10-6 × 1 × 1 × 8 × 1 × Rel. 10 15 Bits per symbol from modulation scheme Qm MIMO 29 Rel. 11 j=1 (j) m Example for FR1, single layer, 15 kHz SCS in DL with 256QAM: 1bis 33 Data rate (in Mbit/s) = 10 x ∑ v (j) layers Values 1, 0.8, 0.75, 0.4 signaled per band yes 27.9 Max. data rate -6 Source: 3GPP TS 38.306 V15.2.0 (2018-06) 2 11 J # of CC 3 12 5G NR data rate calculation Carrier aggregation (bandwidth) 7 13 16 18 3 17 5 7 18 13 15 16 18 20 14 19 3 19 5 7 13 15 16 18 20 3 20 5 7 13 15 16 18 20 21 3 21 5 7 13 15 16 18 20 21 3 5 7 13 15 16 18 20 Maximum 5G NR data rate per layer Frequency range SCS Bandwidth DL UL Efficiency DL Efficiency UL 4 2 SF2 10 ms/2 ms no no no no 2.0/2.8 FR1 15 kHz 50 MHz 288.9 Mbit/s 309.1 Mbit/s 5.78 bit/s/Hz 6.18 bit/s/Hz 5 2 SF2 10 ms no no no no 2.0 FR1 30 kHz 100 MHz 584.3 Mbit/s 625.0 Mbit/s 5.84 bit/s/Hz 6.25 bit/s/Hz 4 SF2 10 ms/2 ms no no no no 2.0/5.7 7 6 Rel. 7 4 SF2 10 ms/2 ms yes (2 ms TTI only) no no no 2.0/11.5 8 Rel. 9 4 SF2 2 ms no no yes no 11.5 9 Rel. 9 4 SF2 2 ms yes no yes no 22.9 10 Rel. 11 4 SF2 2 ms yes yes no no 17.2 11 Rel. 11 4 SF2 2 ms yes no no yes 22.9 12 Rel. 11 4 SF2 2 ms yes yes no yes 34.5 UE categories NB-IoT Category UE categories LTE-M Category 3GPP release DL data rate in Mbit/s UL data rate in Mbit/s Bandwidth in MHz FR1 60 kHz 100 MHz 577.8 Mbit/s 618.1 Mbit/s 5.78 bit/s/Hz 6.18 bit/s/Hz FR2 60 kHz 200 MHz 1.08 Gbit/s 1.18 Gbit/s 5.40 bit/s/Hz 5.90 bit/s/Hz FR2 120 kHz 400 MHz 2.15 Gbit/s 2.37 Gbit/s 5.38 bit/s/Hz 5.93 bit/s/Hz 15 kHz 20 MHz 100 Mbit/s 100 Mbit/s 5.00 bit/s/Hz 5.00 bit/s/Hz - 5 MHz 21.1 Mbit/s 17.2 Mbit/s 4.22 bit/s/Hz 3.44 bit/s/Hz 3GPP release DL data rate in kbit/s UL data rate in kbit/s Bandwidth in kHz NB1 Rel. 13 680 1000 180 M1 Rel. 13 1 3 1.4 All bands NB2 Rel. 14 2536 2536 180 M2 Rel. 14 4 6 5 (optional in DL and UL) Comparison with 3G Comparison with LTE All bands Solutions from Rohde & Schwarz – your partner for wireless communications testing Glossary CC = component carrier (carrier aggregation); DL = downlink, E-DCH = enhanced dedicated channel; FR1 = sub-6 GHz frequency range from 0.45 GHz to 6 GHz; FR2 = mmWave frequency range from 24.25 GHz to 52.8 GHz; HS-DSCH = high speed downlink shared channel; RB = resource block; SCS = subcarrier spacing; TTI = transmission time interval; UL = uplink R&S®FSW Signal and spectrum analyzer R&S®SMW200A Vector signal generator R&S®CMW Wideband radio communications tester R&S®TS8980 RF conformance test system solution R&S®TSME6 Ultracompact drive test scanner www.rohde-schwarz.com/wireless For more information: 3GPP_categories_from_Releases_5_to_15_po_5216-2976_82_v0100.indd 1 20.11.2018 16:34:38 0758144182 5216.3943.82 01.00 PDP 1 en © 2018 Rohde & Schwarz GmbH & Co. KG | 81671 Munich, Germany Data without tolerance limits is not binding | Subject to change 3GPP categories and data rates up to Release 15 PD 5216.3943.82 | Version 01.00 | November 2018 (as) Trade names are trademarks of the owners R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG Regional contact ❙❙ Europe, Africa, Middle East | +49 89 4129 12345 customersupport@rohde-schwarz.com ❙❙ North America | 1 888 TEST RSA (1 888 837 87 72) customer.support@rsa.rohde-schwarz.com ❙❙ Latin America | +1 410 910 79 88 customersupport.la@rohde-schwarz.com ❙❙ Asia Pacific | +65 65 13 04 88 customersupport.asia@rohde-schwarz.com ❙❙ China | +86 800 810 82 28 | +86 400 650 58 96 customersupport.china@rohde-schwarz.com Rohde & Schwarz GmbH & Co. KG www.rohde-schwarz.com ISO 9001 ISO 14001 Certified Quality Management Certified Environmental Management Sustainable product design ❙❙ Environmental compatibility and eco-footprint ❙❙ Energy efficiency and low emissions ❙❙ Longevity and optimized total cost of ownership Service that adds value 1 5 5G data rates LTE UE categories – 3GPP TS 36.306 Minimum inter-TTI interval Total number of serving/secondary serving HS-DSCH cells Total number of serving/ secondary serving HS-DSCH cells in which MIMO mode can be configured Support for 16QAM in DL Support for 64QAM in DL Theoretical maximum downlink physical data rate in Mbit/s 3 1 0 yes no 1.2 Category 3GPP release Downlink DL data rate in Mbit/s Maximum number of supported layers for spatial multiplexing Support for 256QAM Uplink UL data rate in Mbit/s # of CC Maximum number of supported layers for spatial multiplexing Support for 64QAM 5 3 1 0 1.2 2 1 0 1.8 0 Rel. 12 1 1 no 1 1 1 no 1 4 5 5 2 1 5 1 1 5 1 1 0 1.8 1 Rel. 8 10 1 no 1 5 1 no 1 0 3.6 1 bis Rel. 14 10 1 no 1 5 1 no 1 0 3.6 2 Rel. 8 51 2 no 1 25 1 no 1 7.2 3 Rel. 8 102 2 no 1 51 1 no 1 7.2 4 Rel. 8 150 2 no 1 51 1 no 1 5 Rel. 8 299 4 no 1 75 1 yes 1 6 Rel. 10 301 2 or 4 no 1 or 2 51 1 no 1 0.9 7 Rel. 10 301 2 or 4 no 1 or 2 102 1 or 2 no 1 or 2 10 1 1 0 10 1 1 0 10.1 13.9 9 15 1 1 0 10 15 1 1 0 11 5 2 1 0 1 0 5 1 13 12 Rel. 7 15 1 14 Rel. 7 15 1 15 Rel. 7 15 1 16 Rel. 7 15 1 17 Rel. 7 15 1 18 Rel. 7 15 1 1 1 1 1 0 no no 1.8 8 Rel. 10 2998 8 no 5 1497 4 yes 5 yes yes 17.6 9 Rel. 11 452 2 or 4 no 2 or 3 51 1 no 1 21.1 10 Rel. 11 452 2 or 4 no 2 or 3 102 1 or 2 no 1 or 2 yes no 23.3 11 Rel. 11 603 2 or 4 optional 2 to 4 51 1 no 1 27.9 12 Rel. 11 603 2 or 4 optional 2 to 4 102 1 or 2 no 1 or 2 0 1 (MIMO 2x2) 1 (MIMO 2x2) 1 0 yes yes 17.6 1 1 (MIMO 2x2) yes no 23.3 1 0 yes yes 21.1 1 1 (MIMO 2x2) yes no 27.9 yes yes 35.2 yes no 23.3 yes yes 35.2 yes no 46.7 19 Rel. 7 15 1 1 1 (MIMO 2x2) 20 Rel. 7 15 1 1 1 (MIMO 2x2) 21 Rel. 8 15 1 2 (Dual-Cell) 0 22 Rel. 8 15 1 2 (Dual-Cell) 0 23 Rel. 8 15 1 2 (Dual-Cell) 0 24 Rel. 8 15 1 2 (Dual-Cell) 0 42.2 LTE UE downlink categories 15 1 2 (Dual-Cell) 2 (MIMO 2x2) 15 1 2 (Dual-Cell) 2 (MIMO 2x2) yes Adjustment to Mbit/s Modulation Number of carriers J LTE UE uplink categories Maximum number of supported layers for spatial multiplexing Support for 256QAM # of CC Uplink category 3GPP release Uplink UL data rate in Mbit/s Maximum number Support for of supported 64QAM layers for spatial multiplexing Support for 256QAM # of CC Rel. 13 1 1 no 1 M1 Rel. 13 1 1 no no 1 70.5 M2 Rel. 14 4 1 no 1 M2 Rel. 14 6 1 no no 1 84.3 0 Rel. 12 1 1 no 1 0 Rel. 12 1 1 no no 1 Rel. 9 15 1 2 (Dual-Cell) 2 (MIMO 2x2) Rel. 9 15 1 2 (Dual-Cell) 2 (MIMO 2x2) 29 Rel. 10 15 1 3 (Triple-Cell) 0 yes yes 63.2 1bis Rel. 14 10 1 no 1 1bis Rel. 14 5 1 no no 1 30 Rel. 10 15 1 3 (Triple-Cell) 3 (MIMO 2x2) yes yes 126.5 4 Rel. 14 150 2 no 1 3 Rel. 12 51 1 no no 1 31 Rel. 10 15 1 4 (Quad-Cell) 0 yes yes 84.3 6 Rel. 12 301 2 or 4 no 1 or 2 5 Rel. 12 75 1 yes no 1 32 Rel. 10 15 1 4 (Quad-Cell) 4 (MIMO 2x2) yes yes 168.7 7 Rel. 12 301 2 or 4 no 1 or 2 7 Rel. 12 102 1 or 2 no no 1 or 2 33 Rel. 11 15 1 6 (Hexa-Cell) 0 yes yes 126.5 9 Rel. 12 452 2 or 4 no 2 or 3 8 Rel. 12 1497 4 yes no 5 34 Rel. 11 15 1 6 (Hexa-Cell) 6 (MIMO 2x2) yes yes 253.1 10 Rel. 12 452 2 or 4 no 2 or 3 13 Rel. 12 150 1 or 2 yes no 1 or 2 35 Rel. 11 15 1 8 (Octa-Cell) 0 yes yes 168.7 11 Rel. 12 603 2 or 4 optional 2 to 4 14 Rel. 13 9585 4 yes no 32 36 Rel. 11 15 1 8 (Octa-Cell) 8 (MIMO 2x2) yes yes 337.5 12 Rel. 12 603 2 or 4 optional 2 to 4 15 Rel. 13 226 1 or 2 yes no 2 or 3 37 Rel. 11 15 1 2 (Dual-Cell) 2 (MIMO 4x4) yes yes 168.7 13 Rel. 12 391 2 or 4 mandatory 1 or 2 16 Rel. 14 105 1 yes yes 1 38 Rel. 11 15 1 4 (Quad-Cell) 4 (MIMO 4x4) yes yes 337.5 14 Rel. 12 3916 8 mandatory 5 17 Rel. 14 2119 4 yes yes 5 15 Rel. 12 749 to 798 2 or 4 optional 2 to 5 18 Rel. 14 211 1 or 2 yes yes 1 or 2 16 Rel. 12 978 to 1051 2 or 4 optional 3 to 7 19 Rel. 14 13563 4 yes yes 32 17 Rel. 13 25065 8 mandatory 32 20 Rel. 14 316 1 or 2 yes yes 2 or 3 18 Rel. 13 1174 to 1206 2 or 4 or 8 optional 2 to 8 21 Rel. 14 301 1 or 2 yes no 2 to 4 19 Rel. 13 1566 to 1658 2 or 4 or 8 optional 2 to 11 20 Rel. 14 1948 to 2019 2 or 4 or 8 optional 3 to 13 21 Rel. 14 1348 to 1413 2 or 4 optional 4 to 9 Minimum 3GPP release Maximum spreading number of E-DCH codes factor transmitted per transport block Support for 10 ms and 2 ms TTI E-DCH 1 1 SF4 10 ms 2 2 SF4 10 ms/2 ms Support for 16QAM in UL no no Support for Dual Cell 64QAM in UL E-DCH no no no no UL MIMO Theoretical maximum uplink physical data rate in Mbit/s no 0.7 no 1.45/1.40 3 2 SF4 10 ms no no no no 1.4 4 2 SF2 10 ms/2 ms no no no no 2.0/2.8 5 2 SF2 10 ms no no no no 2.0 6 4 SF2 10 ms/2 ms no no no no 2.0/5.7 M2 0 1bis 4 6 M2 0 1bis 5 5 7 9 16 13 18 5 10 11 16 13 18 5 12 13 16 13 15 18 20 3 14 5 7 13 16 18 8 15 17 3 16 5 J Rmax v Q Number of layers v RB Numerology µ 0 for FR1 with 15 kHz SCS 1 for FR1 with 30 kHz SCS 2 for FR1 with 60 kHz SCS 3 for FR2 with 60 kHz SCS 4 for FR2 with 120 kHz SCS Average OFDM symbol duration Ts Scaling factor ƒ Max. number of RBs N Overhead OH 270 for FR1 with 15 kHz SCS 273 for FR1 with 30 kHz SCS 135 for FR1 with 60 kHz SCS 264 for FR2 with 60 kHz SCS 264 for FR2 with 120 kHz SCS 0.14 for DL frequency range FR1 0.18 for DL frequency range FR2 0.08 for UL frequency range FR1 0.10 for UL frequency range FR2 ƒ NRB Ts Number of aggregated component carriers per band or band combination; max. 16 component carriers for carrier aggregation 948/1024, max. code rate possible Number of layers, max. 8 layers in Rel. 15 Scaling factor (1, 0.8, 0.75 or 0.4), signaled via higher layers Max. number of resource blocks per bandwidth part Average symbol duration, taking into account the longer CP duration of the first OFDMA symbol in one slot and the possible extended cyclic prefix instead of the normal CP length T sµ = 10-3 14 × 2 µ µ Subcarrier spacing: ❙ FR1: 0 for 15 kHz SCS, 1 for 30 kHz SCS, 2 for 60 kHz SCS ❙ FR2: 3 for 60 kHz SCS, 4 for 120 kHz SCS OH Overhead due to signaling information: ❙ downlink: [0.14] for FR1, [0.18] for FR2 ❙ uplink: [0.08] for FR1, [0.10] for FR2 7 13 16 18 3 17 5 7 18 13 15 16 18 20 14 19 3 19 5 7 13 15 16 18 20 3 20 5 7 13 15 16 18 20 21 3 21 5 7 13 15 16 18 20 21 3 5 7 13 15 16 18 20 Maximum 5G NR data rate per layer Frequency range FR1 UE categories NB-IoT FR1 UE categories LTE-M 288.9 Mbit/s 584.3 Mbit/s UL 309.1 Mbit/s 625.0 Mbit/s Efficiency DL 5.78 bit/s/Hz 5.84 bit/s/Hz Efficiency UL 6.18 bit/s/Hz 6.25 bit/s/Hz 618.1 Mbit/s 5.78 bit/s/Hz 1.18 Gbit/s 5.40 bit/s/Hz 5.90 bit/s/Hz FR2 120 kHz 400 MHz 2.15 Gbit/s 2.37 Gbit/s 5.38 bit/s/Hz 5.93 bit/s/Hz no no no 2.0/11.5 8 Rel. 9 4 SF2 2 ms no no yes no 11.5 9 Rel. 9 4 SF2 2 ms yes no yes no 22.9 10 Rel. 11 4 SF2 2 ms yes yes no no 17.2 NB1 Rel. 13 680 1000 180 M1 Rel. 13 1 3 1.4 All bands 11 Rel. 11 4 SF2 2 ms yes no no yes 22.9 NB2 Rel. 14 2536 2536 180 M2 Rel. 14 4 6 5 (optional in DL and UL) Comparison with 3G 12 Rel. 11 4 SF2 2 ms yes yes no yes 34.5 6.18 bit/s/Hz Comparison with LTE All bands Solutions from Rohde & Schwarz – your partner for wireless communications testing DL 577.8 Mbit/s yes (2 ms TTI only) DL data rate in Mbit/s UL data rate in Mbit/s Bandwidth in MHz 50 MHz 100 MHz 1.08 Gbit/s 10 ms/2 ms 3GPP release Bandwidth 100 MHz 200 MHz SF2 Category 15 kHz 60 kHz 60 kHz 4 DL data rate in kbit/s UL data rate in kbit/s Bandwidth in kHz SCS 30 kHz FR1 FR2 Rel. 7 3GPP release Subcarrier per ( 14 × 2 0 ) 948 × ( 270 × 12 ) × × ( 1 – 0.14 ) = 288.9 Mbit/s 10-3 1024 Bits per modulation symbol; dependent on modulation scheme. Rel. 15: 1 for BPSK, 2 for QPSK, 4 for 16QAM, 6 for 64QAM and 8 for 256QAM (max. modulation scheme in Rel. 15) 7 Category × ( 1 – OH (j) ) Note: maximum data rate can be limited by UE capability Supported LTE DL/UL category combinations M1 DL category M1 UL category T sµ Maximum 5G NR data rate depends on circumstances and higher layer settings: 3GPP release Downlink DL data rate in Mbit/s M1 27 Category Max. code rate Rmax Data rate = 10-6 × 1 × 1 × 8 × 1 × Downlink category HSUPA UE categories – 3GPP TS 25.306 Bits per symbol from modulation scheme Qm MIMO 28 yes BW(j), µ N PRB x 12 j=1 Values 1, 0.8, 0.75, 0.4 signaled per band 42.2 Rel. 9 Rel. 9 Data rate (in Mbit/s) = 10-6 x ∑ v (j) × Q (j) × ƒ (j) × R × layers m max Example for FR1, single layer, 15 kHz SCS in DL with 256QAM: 55.9 27.9 25 26 Max. data rate Source: 3GPP TS 38.306 V15.2.0 (2018-06) 5 7 J # of CC 2 8 5G NR data rate calculation Carrier aggregation (bandwidth) 3 6 15 kHz 20 MHz 100 Mbit/s 100 Mbit/s 5.00 bit/s/Hz 5.00 bit/s/Hz - 5 MHz 21.1 Mbit/s 17.2 Mbit/s 4.22 bit/s/Hz 3.44 bit/s/Hz Glossary CC = component carrier (carrier aggregation); DL = downlink, E-DCH = enhanced dedicated channel; FR1 = sub-6 GHz frequency range from 0.45 GHz to 6 GHz; FR2 = mmWave frequency range from 24.25 GHz to 52.8 GHz; HS-DSCH = high speed downlink shared channel; RB = resource block; SCS = subcarrier spacing; TTI = transmission time interval; UL = uplink R&S®FSW Signal and spectrum analyzer R&S®SMW200A Vector signal generator R&S®CMW Wideband radio communications tester R&S®TS8980 RF conformance test system solution R&S®TSME6 Ultracompact drive test scanner www.rohde-schwarz.com/wireless Poster | Version 01.00 For more information: 3GPP_categories_from_Releases_5_to_15_po_5216-2976_82_v0100.indd 2 ❙ 3GPP release Maximum number of HS-DSCH codes received ❙ Category ❙ Worldwide Local and personalized Customized and flexible Uncompromising quality Long-term dependability 4G data rates and UE categories HSDPA UE categories – 3GPP TS 25.306 ❙ 3GPP categories and data rates up to Release 15 3G data rates and UE categories ❙ Rohde & Schwarz The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, monitoring and network testing. Founded more than 80 years ago, this independent company has an extensive sales and service network and is present in more than 70 countries. The electronics group is among the world market leaders in its established business fields. The company is headquartered in Munich, Germany. It also has regional headquarters in Singapore and Columbia, Maryland, USA, to manage its operations in these regions. 3GPP categories and data rates up to release 15 20.11.2018 16:34:39