Technical product information
Gear series :
Parallel shaft geared motor
Type :
FH072-11P-112M-06E-TH-TF-BR32
Operation data :
Ambient temperature :
+20
Type of operation :
S1
°C
Gear data :
Max. perm. thermal power limit at +20 °C and S1
operation :
20
[kW]
Output speed :
43
[rpm]
Output torque :
985
[Nm]
Service factor :
1.55
Gear stages :
2
Ratio :
45.02
Circum ferential backlash (min-max) :
4' - 11'
Perm. input torque at fB1 :
33.3
[Nm]
Max. perm. input speed :
6000
[rpm]
Mounting position :
M1
Hollow shaft :
Ø 50 H7
Keyway :
DIN6885.1
Painting :
LC1 - Indoor installation, neutral atmosphere NDFT 60 µm (C1 DIN EN ISO 12944-5)
Color :
RAL 7011 (Iron grey)
[mm]
Input side :
Type :
Direct mounting
Input shaft :
Ø 34 k6
Input flange :
FC160
Further executions gear unit :
Lubricant :
Mineral oil - CLP ISO VG 220
Motor data :
Series :
WEG Modular System Motor (EUSAS)
Housing material :
Aluminium
Type :
11P
Motor power :
4.4
[kW]
Rated speed :
1920
[rpm]
Rated torque :
22
[Nm]
Voltage :
400 (only for the use by inverter)
[V]
Frequency :
100 (only for the use by inverter)
[Hz]
Connection :
DD
Rated current :
11.0
Starting to rated current :
Permissible overload current of the frequency inverter
'cos φ' :
0.72
Protection class :
IP 55
Created on 01.27.2022
Created by cat4CAD 6.0.2458.404
[A]
Subject to changes.
1/3
Technical product information
Mounting position of the terminal box :
side 1 cable entry I
Insulation class :
F
Mass moment of inertia :
25.67 x 10-3
Voltage range - 50 Hz :
380-420 V (D), 660-690 V (Y), 190-210 V (DD), 330-365 V (YY)
Voltage range - 60 Hz :
440-480 V (D), 220-240 V (DD), 380-415 V (YY)
Terminal board :
9 bolts, 12 leads
[kgm2]
Motor certifications :
Further motor executions :
Fan :
self ventilated
Temperature controller :
Bimetal switch NCC (TH) and PTC thermistor (TF) for switch off
Ball bearing :
Standard
Brake data :
Type :
BR32
Supply voltage for rectifier :
190-240V (connected in the motor terminal box)
Total weight :
91.3
3D Model (STEP) :
CAD_ATTACH_0_STEP
Dimension sheet (PDF):
CAD_ATTACH_0_PDF
Created on 01.27.2022
Created by cat4CAD 6.0.2458.404
[Nm]
[kg]
Subject to changes.
2/3
Technical product information
3D Model (3D-PDF) :
CAD_EMBED_0_U3D
To view the 3D PDF correctly you need Acrobat Reader®.
You can download it free of charge at https://get.adobe.com/uk/reader/.
Created on 01.27.2022
Created by cat4CAD 6.0.2458.404
Subject to changes.
3/3