Errata for
AWS D1.4/D1.4M:2011, Structural Welding Code—Reinforcing Steel
(updated 6/7/2013)
Page 11 – Figure 3.2 – Correct all instances of “TO” with “to.”
Page 27 – Clause 6.1.2.2 – Correct “AWS D12.1” reference to “AWS D1.1.”
Page 27 – Clause 6.2.1.1 – Correct “Table 6.1” reference to “Table 6.2.”
Page 32 – Table 6.1 – Correct “Maximum Electrode Diametery” to “Maximum Electrode
Diameter.”
Page 34 – Table 6.3 – Correct row three by adding “or 6.5(D)]” and row four by deleting
“(D)” and replacing it with “(E)” as follows:
Page 35 – Table 6.4 – Correct row three for Direct Butt Joint under the Fillet Joint
column to “F, H, V” as attached:
Page 35 – Table 6.4 – Replace “V” in row four of Direct Butt Joint under the Fillet Joint
column to “OH” as attached:
Page 40 – Figure 6.5(C) —Replace “8” with “B”.
Filename: errata_d1-4-2011
Replace “8” with “B”
Pages 40-41 – Table 6.5 – Replace all instances of “L1” with “L1.”
Pages 40-42 – Table 6.5 and 6.6 – Replace all instances of “LMIN” with “Lmin.”
Page 59 – Annex B – Correct cross-sectional area of bar size number 18 from “258” to
“2581.”
Filename: errata_d1-4-2011
Filename: errata_d1-4-2011