Piping Material Specifications
Client:
-
Piping Class ACA
EVX Midstream
Project Name:
Hacksaw Crude Gathering
Maximum Allowable Limits
Original Issue
Services
Design Code
1/29/2018
Temp °F
Max Press. PSIG
-20 to 100
285
REV
Date
ASME B31.3, Hydrocarbon Process Piping
200
260
A
1/29/2018
300
230
Rating and Material
Temp. Range
Hydrocarbon
400
200
Process Piping
Class 150, Carbon Steel
-20 to 650
500
170
Corrosion Allowance 0.063 In.
600
140
650
125
Size, NPS
Description
PIPE (Note 1)
1 1/2" & smaller Sch. 160, Seamless, Carbon Steel, ASTM A106 GR. B, Plain End
XS, Seamless, Carbon Steel, ASTM A106 Gr. B, Beveled End
2"
STD, Seamless, Carbon Steel, ASTM A106 Gr. B, Beveled End
3" thru 24"
FITTINGS
Ells, Tees, Couplings, Caps, Reducers - Class 3000, Threaded, Carbon Steel, ASTM A105
2" & Smaller
Unions - Class 3000, Threaded, Carbon Steel, ASTM A105, with Steel to Steel Seats
Threadolets - Class 3000, Carbon Steel, ASTM A 105 or A234 Gr. WPB, MSS SP-97
Plugs - Solid Hex Head, MNPT, Steel, ASTM A 105
Ells, Tees, Caps, Reducers-XS, Buttweld, Carbon Steel, ASTM A234 Gr. WPB, Beveled Ends
2"
Ells, Tees, Caps, Reducers - STD, Buttweld, Carbon Steel, ASTM A234 Gr. WPB
3" thru 24"
NIPPLES
1 1/2" & Smaller Sch. 160, Seamless, Carbon Steel, ASTM A106 GR. B, Plain ends
XS, Seamless, Carbon Steel, ASTM A106 GR. B, Plain ends
2"
SWAGES
1 1/2" & Smaller Concentric Swage, CS, ASTM A234 Gr. WPB, MSS SP-95, Sch. 160, TBE
Concentric Swage, CS, ASTM, A234, Gr. WPB, MSS SP-95, STD (Note 2)
2" thru 4"
FLANGES
ASME B16.5, Class 150, Raised Face, Threaded, Carbon Steel, ASTM A 105
2" & Smaller
ASME B16.5, Class 150, Raised Face, Weld Neck, XS Bore, Carbon Steel, ASTM A105
2"
ASME B16.5, Class 150, Raised Face, Weld Neck, STD Bore, Carbon Steel, ASTM A105
3" thru 24'
BLIND, ASME B16.5, Class 150, Raised Face, Carbon Steel, ASTM A105
ALL
BLEED RINGS
ASME Class 150, RF, with 1/2" NPT Tap, ASTM A516 Gr. 70
2" thru 24"
BOLTING
Stud Bolts, Alloy Steel, ASTM A193, Grade B7, with Heavy Hex Nuts, ASTM A194, Grade 2H
ALL
GASKETS
Gaskets, 1/8" thick ASME B16.5 Class 150, per API 601, spiral wound with 304 SS winding and chlorite/graphite
ALL
filler with inner ring, Flexitallic Style CGI or equal
Insulation Kits, ASME Class 150, RF, Full Face Gasket with Minlon Washers and Sleeves
ALL
SPECTACLE BLINDS (Note 3)
BIind Spectacle, ASME B16.48, Class 150 RF, Carbon Steel, ASTM A516 Gr. 70, Figure 8 Style
1" thru 8"
Blind Paddle, ASME B16.48, Class 150 RF, Carbon Steel, ASTM A516 Gr. 70
1" thru 24"
Spacer Paddle, ASM E B 16.48, Class 150 RF, Carbon Steel, ASTM A516 Gr. 70
GENERAL PIPING NOTES:
1. All buried pipe is to be FBE coated 12-14 mils with wrapped fittings
2. Reserved for API Tank connections. Beveled end x threaded end as needed. Can be TBE if large end is 2".
3. Spectacle blind preferred for 8" and smaller. Paddle acceptable when space is limited.
Piping Spec Class ACA - Rev A
1 of 2
2/12/2018
Piping Material Specifications
Client:
Size, NPS
EVX Midstream
-
Piping Class ACA
Project Name:
Hacksaw Crude Gathering
Description
MANUAL VALVES (Note 1 & 3)
Check
Class 800, Threaded, Forged Carbon Steel, Swing
Class 800, Threaded, Forged Carbon Steel, Piston
Class 150, RF, CS, Swing
Class 150, RF, CS, Piston
Class 150, RF, CS, 316 SS Plate, Dual Plate Wafer
Gate
Class 800, Threaded, Forged Carbon Steel
Class 150, RF, Carbon Steel
Extended Body Gate
Class 800, MPT x FPT, Forged Carbon Steel
Globe
Class 800, Threaded, Forged Carbon Steel
Class 150, RF, CS
Ball
3000 CWP (WOG), Threaded, Carbon Steel, Regular Port (Full Port where specified)
Class 150, RF, CS, Floating Ball, Regular Port (Full Port where specified)
Class 150, RF, CS, Trunnion Ball, Regular Port (Full Port where specified)
Class 150, RF, CS, Trunnion Ball, Gear Operated, Regular Port (Full Port where specified)
Butterfly (Check Press. -Temp.
Limits)
Butterfly
Class 150, RF, CS, Wafer body
Class 150, RF, CS, Lug Body
Plug
Class 150, RF, CS
Class 150, RF, CS, (double block and bleed)
Needle
Needle (Note 2)
3000 CWP, CS, MPT x FPT, T-Handle, (Gauge Valve)
3000 CWP, CS, MPT x FPT, Long Body, T-Handle, (Gauge Valve)
2" & Smaller
2" thru 24"
1 ½" & Smaller
2" thru 24"
1 ½" &Smaller
1 ½" & Smaller
2" thru 8"
1 ½" & Smaller
2"&3"
2" thru 4"
6" thru 24"
3" thru 24"
2" thru 6"
2" thru 24"
½" thru ¾"
Branch Size
MANUAL VALVE NOTES:
1. All valves to be reviewed for material compatibility with process fluids, temperatures and pressures.
2. Needle valves shall be used for pressure and instrument connections.
3. See valve specification sheet for complete valve descriptions and pressure and temperature limits.
NPS
1/2
3/4
1
1 1/2
2
3
4
6
8
10
12
14
16
18
20
24
24
TO
TO
TO
TO
W
W
W
W
W
TR
TR
TR
TR
TR
TR
T
20
TO
TO
TO
TO
W
W
W
W
TR
TR
TR
TR
TR
TR
T
18
TO
TO
TO
TO
W
W
W
W
TR
TR
TR
TR
TR
T
Piping Spec Class ACA - Rev A
16
TO
TO
TO
TO
W
W
W
TR
TR
TR
TR
TR
T
14
TO
TO
TO
TO
W
W
W
TR
TR
TR
TR
T
12
TO
TO
TO
TO
W
W
W
TR
TR
TR
T
10
TO
TO
TO
TO
W
W
TR
TR
TR
T
BRANCH CONNECTIONS
8
6
4
3
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
TO
TR
W
W
TR
TR
W
TR
TR
T
TR
TR
T
TR
T
T
2
TO
TO
TO
TR
T
1 1/2
TR
TR
TR
T
1
TR
TR
T
3/4
TR
T
1/2
T
CONNECTION LEGEND
TO - Threadolet
SO - Sockolet
W-Weldolet
T-Tee
TR - Reducing Tee, or Tee w/FPT Swages or Reducer
2 of 2
2/12/2018