Standards in Pipeline Construction Standards in Pipeline Construction Standard Directives, Laws, Regulations Directives for pressure equipment DGRL 97/23/EG Pressure Equipment Regulation (14th change to the GPSG) DruckgeräteV Technical Basics Graphic symbols for technical drawings, pipelines General DIN 2429-1 Functional diagram DIN 2429-2 Manual for the procurement of equipment for power plants, pipelines and fittings Technical delivery conditions for pipe components made from austenitic stainless steels, group 8.1 (CD ISO 15608) Seamless compressive stressed Pipes DIN EN 10216-1 DIN EN ISO 6708 Made from unalloyed and alloyed steels with fixed properties at elevated temperatures DIN EN 10216-2 ISO 2944 Made from alloyed fine grain steels DIN EN 10216-3 DIN 2403 Made from unalloyed and alloyed steels with fixed properties at low temperatures DIN EN 10216-4 General DIN EN 13480-1 Made from stainless steels DIN EN 10216-5 Materials DIN EN 13480-2 Welded compressive stressed Pipes Computation and construction DIN EN 13480-3 Assembly and relocation DIN EN 13480-4 Made from unalloyed steels with fixed properties at room temperature DIN EN 10217-1 Testing and inspection DIN EN 13480-5 Additional testing on underground pipelines DIN EN 13480-6 Made from electrically welded unalloyed and alloyed steels with fixed properties at elevated temperatures DIN EN 10217-2 Made from fine-grained steels DIN EN 10217-3 DIN EN 13480-7 Made from electrically welded unalloyed and alloyed steels with fixed properties at low temperatures DIN EN 10217-4 DIN EN 13480-8 UP-welded pipes made from unalloyed steels with fixed properties at elevated temperatures DIN EN 10217-5 UP-welded pipes made from unalloyed steels with fixed properties at low temperatures DIN EN 10217-6 Made from stainless steels DIN EN 10217-7 DIN EN 45510-7-1 Boiler and pipeline armatures DIN EN 45510-7-2 Pipeline components, definitions and selection of DN (nominal width) Fluid technology, nominal pressures Metallic Industrial Pipelines Instructions for use of the conformity assessment process Additional requirements for pipelines of aluminum and aluminum alloys Technical Basic Standards Explanation of terms for introduction of steel DIN EN 10020 Designation system for steels Symbols DIN EN 10027-1 Numerical system DIN EN 10027-2 Designation system for steels, additional symbols Sheet Material and Forgings CR 10260 Dimensions and longitudinally related mass for seamless and welded steel pipes DIN EN 10220 Iron and steel materials, types of testing certifications DIN EN 10204 Publicly Available Specifications Classes of pipe for processed equipment Forgings made of steel for pressure vessels (general requirements, ferritic and martensitic steels, nickel steels, fine grain steels, martenistic, austenitic compound steels) DIN EN 10222-1 to -5 Flat products made from pressure vessel steel DIN EN 10028-1 to -6 Pipes for Gas and Flammable Liquids Basic principles for the development of pipe classes on the basis of EN 13480 PAS 1057-1 Pipe fittings – special designs PAS 1057-5 Technical delivery conditions for pipe components made from alloyed and unalloyed steels with fixed properties at high temperatures, group 1.1 and 1.2 (CR ISO 15608) PAS 1057-10 Pipes for flammable mediums - requirement class A DIN EN 10208-1 Pipes for flammable mediums - requirement class B DIN EN 10208-2 Pipes for flammable mediums - requirement class C DIN EN 10208-3 Kempchen Dichtungstechnik GmbH · Tel. +49 (0)208 8482 0 · Fax. +49 (0)208 8482 285 · info@kempchen.de · www.kempchen.de 154 PAS 1057-11 Standard pipe classes PN 10 to PN 100 pipe components made from unalloyed and alloyed steels with fixed properties at high temperatures, group 1.1 and 1.2 and austenitic stainless steels, group 8.1 (CR ISO 15608) PAS 1057-101 Made from unalloyed steels with fixed properties at room temperature High pressure pipelines Designation of pipelines by transported substance 09 Standards in Pipeline Construction Standard Standards in Pipeline Construction Standards in Pipeline Construction Standards in Pipeline Construction Standard Pipe Accessories DIN EN 10241 Steel fittings with threading DIN EN 10242 Malleable iron fittings Pipe fittings for welding made from unalloyed and alloyed C-Steels for interior pressure load Pipe fittings for welding made from stainless steels for interior pressure load Compensators with metallic bellows for pressure application DIN EN 10253-2 DIN EN 10253-4 DIN EN 14917 Manual for the Ordering and Production of Pressure Equipment per the DGRL Standards in Pipeline Construction Standard Methods of computation for off-load DIN CEN/TS 1591-3 Qualification of personnel in the assembly of screw joints in the DGRL DIN CEN/TS 1591-4 Round flanges for pipes, fittings, pipe fittings and accessory parts, identified by class Steel flanges, NPS ½ up to 24 DIN EN 1759-1 Flanges made from copper alloys DIN EN 1759-3 Flanges made from aluminum alloys DIN EN 1759-4 Gaskets for flanges with class designation Flat gaskets made from non-metallic materials with and without inserts DIN EN 12560-1 General requirements PAS 1010-1 Spiral-wound gaskets for steel flanges DIN EN 12560-2 Unlighted vessels PAS 1010-2 Industrial pipelines PAS 1010-3 Non-metallic soft-material gaskets with PTFE envelope DIN EN 12560-3 Pressurizing equipment parts PAS 1010-4 Equipment parts with a safety function PAS 1010-5 Components PAS 1010-6 Made from corrugated, flat or crenated profile for steel flanges DIN EN 12560-4 RTJ gaskets made from metal for steel flanges DIN EN 12560-5 Grooved gaskets for steel flanges DIN EN 12560-6 Metal jacketed gaskets with layers for steel flanges DIN EN 12560-7 Flanges and their Joints Round flanges per PN Made from steel DIN EN 1092-1 Made from cast iron DIN EN 1092-2 Made from copper alloys DIN EN 1092-3 Made from aluminum alloys DIN EN 1092-4 Gaskets for flanges with PN-Designations Flat gaskets made from non-metallic material with and without inserts Quality assurance testing and testing of gaskets according to the standards of series EN 1514 and 12560 DIN EN 14772 09 DIN EN 1514-1 Spiral-wound gaskets for steel flanges DIN EN 1514-2 Non-metallic soft-material gaskets with PTFE envelope DIN EN 1514-3 Made from metal with corrugated, flat or crenated profile for steel flanges DIN EN 1514-4 Grooved gaskets for steel flanges DIN EN 1514-6 Metal-jacketed gaskets with layers for steel flanges DIN EN 1514-7 O-ring seals DIN EN 1514-8 Bolts and nuts Selection of bolts and nuts DIN EN 1515-1 Classification of bolt materials, by PN, for steel flanges DIN EN 1515-2 Classification of bolt materials, by class DIN EN 1515-3 Selection for use within the DGRL for steel flanges DIN EN 1515-4 Rules for the construction of flange joints with round flanges and gaskets Methods of computation DIN EN 1591-1 Background information DIN EN 1591-1 Beibl. 1 Gasket characteristic values DIN EN 1591-2 Kempchen Dichtungstechnik GmbH · Tel. +49 (0)208 8482 0 · Fax. +49 (0)208 8482 285 · info@kempchen.de · www.kempchen.de Standards in Pipeline Construction 155
