What are the Different Types
of Pipe Fittings?
INTRODUCTION
Pipe fittings are commonly used in all piping and
plumbing systems used in industrial and commercial
applications. Fittings necessitate that pipes be joined
or mounted in the proper location and, where
possible, terminated or closed. Fittings come in a
variety of shapes and sizes. These can be costly,
time-consuming, and require the construction of
various resources. Reducers and declining tees are
examples of pipe capacity changes. Connect various
components, such as couplings, and disrupt flows,
such as caps.
Types of Pipe Fittings
Although each type of pipe or tube requires its own
style of fitting, the most common features are shared by
all pipe fittings. Pipe assemblies can be found wherever
plumbing supplies are sold. Fittings are commonly used
in hydraulic and plumbing operations for a variety of
specific applications. There are several different styles
of fittings available, made from a variety of materials.
Some of the most common types are elbows, tees, wyes,
frames, couplings, ties, friction fittings, covers,
connectors, and valves. This Blog will go over the
various types of Pipe Fittings in depth.
Elbows
These pipe attachments are used to
change the direction of the flow. Despite
their high demand in plumbing, they are
mostly available in two standard shapes:
90 and 45 degree angles. When the
piping diameters are specific, variations
in the elbow reducer are common.
Elbow fittings are made from a variety of
materials, the majority of which are
female.
Couplings
A coupling is a pipe covering that is used to prevent
leaks. Pipe couplings that have been split or damaged.
The connecting holes would be small in diameter.
Regular coupling and slip-coupling are the two types of
couplings used in plumbing. To avoid leakage, use
rubber seals or gaskets on both sides of the usual
sealing placed between the two pipes. The slip
coupling also necessitates the use of two pipes in order
to repair the long pipes that were destroyed.
Union
In terms of function, this type of pipe fitting is
similar to a union, but with one difference: a union
can be easily removed when a coupling cannot. A
variety of dielectric unions are used to connect
pipes made of different materials to avoid galvanic
corrosion. These pipe fittings are made up of
threads that are finished with a nut, female, and
male.
Adapters
Pipes are linked to connections to either increase the
duration of their connections or if the pipes do not
have appropriate ends. These pipe fittings allow
either male or female threading to the pipe ends as
needed. It enables communication unlike pipes
without the need for complex configuration. These
are most commonly used for PVC and copper tubing.
Valves
Valves are used in the plumbing system to stop the flow of
gases or liquids. Throttling, separation, and non-return are
the three styles that occur. Separation valves are used for
immediate disconnection in order to replace or rebuild a
portion of the piping system. Throttling valves are used to
control the volume of a liquid's pressure in a pipe; as a
result, they can withstand the tension caused by this
mechanism.
Bushings
These pipe fittings are used to connect pipes
of different sizes by increasing the size of the
larger fit to the size of the smaller pipe. In
comparison to a union or coupling used for
the same purpose, bushings are not always
inside out threaded and take up very little
space.
Flanges
Flanges are another type of pipe fitting that is used
to connect pipes, Flanges engines, valves, and other
sections to form a complete piping network. They
have the capability of quickly disinfecting or
inspecting the entire system from the inside.
CONTACT US
FIND US
Call: +971 42216819
https://rzbmco.com/