ABB Salvador Keypad & Holdto-Run Buttons Test App Guide
1
Table of Contents
1
Revision History ................................................................................................................... 3
2
Introduction ........................................................................................................................ 4
3
Requirements ...................................................................................................................... 4
4
Test Procedure .................................................................................................................... 4
4.1
Power Salvador system and boot to Windows 10.......................................................... 4
4.2
Launch Keypad application by double clicking KeypadTest.exe icon .............................. 4
4.3
Test Buttons ................................................................................................................. 5
4.3.1
Button Pressed ...................................................................................................... 5
4.3.2
Button Release ...................................................................................................... 5
4.4
Pass Criteria.................................................................................................................. 6
Table of Figures
No table of figures entries found.
2
1 Revision History
Following is a brief history of this document. The date indicates when the text was last modified,
causing the revision number to change.
Revision
Date
Author
Description
0.1
2017/10/15
Tim Lin
Initial version
Information in this document is provided in connection with Flex products. No license, express
or implied, by estoppels or otherwise, to any intellectual property rights is granted by this
document. Except as provided in Flex’s Terms and Conditions of Sale for such products, Flex
assumes no liability whatsoever, and Flex disclaims any express or implied warranty, relating to
sale and/or use of Flex products including liability or warranties relating to fitness for a
particular purpose, merchantability, or infringement of any patent, copyright or other
intellectual property right. Flex may make changes to specifications and product descriptions at
any time, without notice.
Copyright © Flex Corporation 2017
*Third party brands and names are the property of their respective owners.
Copyright 2017, Flex Corporation
All Rights Reserved.
3
2 Introduction
This user guideline describes procedure to test Keypad and Hold-To-Run Buttons
using KeypadTest.exe.
3 Requirements
Below hardware platform and test application are needed:
1. Salvador M10:1 system with Window 10 x64 OS.
2. KeypadTest.exe.
4 Test Procedure
4.1 Power Salvador system and boot to Windows 10.
4.2 Launch Keypad application by double clicking KeypadTest.exe icon
4
4.3 Test Button
Press and release each buttons on keypad and hold-to-run button.
4.3.1 Button Pressed
Background of key becomes RED when relative key button is pressed.
4.3.2 Button Release
Background of key becomes GREEN when relative key button is released.
5
4.4 Pass Criteria
All buttons shall be in GREEN when all buttons pass test.
6