STAINLESS STEEL PIPE FITTING GUIDE
Pipe fittings were primarily used in the industrial and
commercial sectors until stainless steel arrived and
took it to the next level. After seeing the impressive
benefits of stainless steel for other applications,
material
preferences
quickly
improved!
Stainless steel is now used not only for pipe fittings
but also for flanges and instrumentation valves.
WHAT EXACTLY ARE PILE FITTING?
Pipe fittings are commonly used to connect the
bores of two (or more) pipes or tubes to
separate equipment. Stainless steel pipe fittings
manufacturers in India also recommend using
pipe fittings as a fluid flow control device. Pipe
fittings can also be used to close and seal any
pipe.
PIPE FITTING ARE AVAILABLE IN TWO VARIETIES
Pipe fittings are classified into two types:
male fittings and female fittings. What is the
distinction?
Male threads are fitted out on threaded pipe
fittings, while female threads are used on
the inside. Pipe fittings typically have one
female end and one male end. These are
referred to as street fittings. Pipe fittings can
be used to connect pipes and tubes in the
following ways:
Using Threading: In this
process, threaded (metal)
pipes are threaded
together to connect to
standard fittings and pipes.
By means of slip-fit: These
pipes have sleeves that
make it easier to slip one
pipe into another tube
fitting.
WHY SHOULD USE STAINLESS STEEL PIPE FITTINGS
Stainless steel is a type of steel that is
resistant to corrosion. Because of the
formation of a passive oxide film, the
steel is self-repairing. The resistance
properties of this protective layer
improve as chromium and molybdenum
levels rise. Typical stainless steel alloys
for piping have a chromium content of
17-18% and a nickel content of 8-12%.
The most common pipe fittings are
stainless steel 304 pipe fittings and
stainless steel 316 pipe fittings.
TIPS FOR EASIER PIPE FITTINGS SELECTION
There are numerous types of pipe fittings available, making it difficult for
buyers to select the most appropriate one based on the application. The
following are some suggestions to help with the selection process. Connection
Type Each fitting has two different connector types, such as male threaded and
female threaded ends. Likewise, one end could be threaded while the other has
a male slip.
Experts disagree on the materials used in construction. However, pipe fittings
made of the same material as the pipe to which the fittings will be applied are
preferable. In some cases, this rule is not followed.
OTHER IMPORTANT FACTORS TO CONSIDER ARE:
1. Type of Fitting
2. Size
3. Examine the flow
4. Design
5. Codes and standards
6. Thickness
An extensive product catalog has made it easier to find the right pipe fitting,
instrumentation valve, and tube fitting for your application.
Reference
CONTACT US
Name: Rubaiya Zueaid Bldg Matl Co. L.L.C.
Website: https://rzbmco.com/
Email Id: online@rzbmco.com
Phone Number: 971 42216819