EUROPEAN UNIVERSITY of LEFKE
Faculty of Engineering
Department of Electrical and Electronic Engineering
EE 216 / ECE 216 – Circuit Theory II
Project
Std. No:
Name:
Gr:
Class: _ _ _ _ _
Due to: 07/06/2022, until 17:00.
Considering Magnetic Coupling Circuits prepare your report Theoretically analyze
any circuit model that can be used in that area. By using any design program (such as
circuit maker, pspice, Proteus, matlab / simulink, etc.) get the same outputs and compare
your results that is obtained from the theoretical one. Provide us schematics as well.
I expect a brief professionally written report with references. The report should give an
introduction to the problem, a description of the solution and any relevant theory,
simulation results, and conclusions. I expect that you will read the current literature for
your application and that it will be correctly and completely cited in a reference list.
Novelty, correctly applied, will be rewarded in the project grading. All Matlab/C++ code
should be turned in via an electronic appendix (i.e., create a zip folder and submit it with
your report).
You must write the report yourself; plagiarism can lead to a failing mark in the project,
the course, or worse.
Sources of information
IEEE Trans. Signal Processing, IEEE Trans. Communications, IEEE Journal on Selected Areas in
Communications, IEEE Trans. Image Processing, IEEE Trans. Consumer Electronics, Signal
Processing, Proc. ICASSP, Proc. Globecom, Proc. ICC, etc.
Sample Template
1. Introduction
1.1. Giving definition of the Selected Topic and /or Application
1.2. Discuss the problems in the simulation and modelling of the Selected Topic and /or Application
1.3. Discuss the best models which provides better results in the evaluation
2. A description of the solution and any relevant theory.
3. Simulation software. Theoretical and Technical Understanding with Discussion with Simulation
Results
4. Conclusions
References
When you read articles or reports, keep the following in mind

What is the main contribution of the paper?

Is this important, why?

Is this a theoretical contribution to some fundamental problems in Communication Systems
Application?

What was the main insight in getting the result?

What is not clear to you?

What did the authors not do, and you regard important?

What are the most important assumptions are they limiting?

What are the possible applications suggested in the paper?

How does this relate to other things we have seen?

What extensions does this suggest? Can you suggest some project idea based around the ideas in
this paper?
Grading Methodlogy:
1. 15% Abstract, Introduction, Conclusion
2. 15% The general structure of Report (Format, Labeling, Figure, Referencing)
3. 20% Research Methodology
4. 50% Theoretical and Technical Understanding & Discussion with Simulation Results
Projects must be made individually. Cheating is a behavior that requires disciplinary
investigation. Plagiarism will be checked and projects with more than 20% similarity will
be considered unsuccessful.
Note: You can use the Course Project Preparetion document which is given in the moodle
course page tpo write your Project. You must save your Word document such as
EE216Prj1Ahmet145111 and then upload to the system.