TICO S/PA
DESCRIPTION
Tico S is a high performance machinery mounting material. It matches today’s fast changing
manufacturing environment, where ease of machine mounting and flexibility of plant layout are prime
factors.
Tico S is manufactured from a blend of carefully selected cork particles and polychloroprene/
acrylonitrile elastomers.
TYPICAL PROPERTIES
Tensile Strength
2.1 MN/m2
Elongation at Break
50%
Hardness
69 + 50
IRHD
Thermal Conductivity
0.1
0.7
W/m0C
Btu x in/ft2 x h x 0F
Damping Factor
0.1
Co-efficient of Friction
0.69
0.5
TICO to concrete
TICO to bright mild steel
-40° to +100° C
TICO S will operate satisfactorily over the indicated
range and is suitable for both arctic and tropical
climates
0.5 MN/m2
TICO S will withstand very high dynamic and static
loads without physical breakdown. In machinery
mounting applications, the recommended max. static
load should not be exceeded without consultation.
Temperature Range
Load-bearing Capacity
Recommended
Maximum Load
Tested in accordance with BS 903
SUPPLY DETAILS
Code:
TICO S
Product:
Cork/Elastomer Pad
Standard Thickness (mm):
6
9.5
12.5
19
25
Standard Size (mm):
1200 x 50
1200 x 75
1200 x 100
1200 x 150
1200 x 600
1200 x 1200
Contact ‘S’
General Purpose
Adhesive
Area Coverage
1 lt Can
5 lt Can
Information in this document and otherwise supplied to users is based on our general experiences and is given in good faith but, because of
particular factors which are outside our knowledge and control and affect the use of products, no warranty is given or implied with respect
to such information. Specifications are subject to change without notice. Statements of operating limits quoted in this document are not an
indication that these values can be simultaneously applied. A safe handling data sheet on this material is available on request.
Tel: +44 (0) 1579 320808 Email: tico@tiflex.co.uk
Web: www.tiflex.co.uk/tico
Page 1 of 3
23/12/2015
TICO S/PA
GRAPHICAL DATA
0.8
0.7
Stress (MN/m2)
0.6
Material Thickness
6mm
9.5mm
12.5mm
19mm
25mm
0.5
0.4
0.3
0.2
0.1
0
0
0.5
1
1.5
2
2.5
3
Deflection (mm)
0.8
Stress (MN/m2)
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
Frequency (Hz)
Information in this document and otherwise supplied to users is based on our general experiences and is given in good faith but, because of
particular factors which are outside our knowledge and control and affect the use of products, no warranty is given or implied with respect
to such information. Specifications are subject to change without notice. Statements of operating limits quoted in this document are not an
indication that these values can be simultaneously applied. A safe handling data sheet on this material is available on request.
Tel: +44 (0) 1579 320808 Email: tico@tiflex.co.uk
Web: www.tiflex.co.uk/tico
Page 2 of 3
23/12/2015