Uploaded by gonzalesgiordanmartin

Aviot

advertisement
Machine Translated by Google
When switching with the earphone body
You can turn the power on / off for each of the left and
Power ON ÿ LED white (body color)
How to change the pairing device (if you own multiple devices)
Power OFF ÿ LED orange
When changing from the connected
(The external sound capture mode indicates an ambient microphone.) Press
device side Disconnect this product from the device used.
and hold the button on the L side for 1.5 seconds + release your finger while the voice
right by pressing and holding the touch sensor on the
External sound capture mode ON / OFF
earphone body. * If you want to turn off the power, the
guidance is sounding to switch the external sound capture mode ON / OFF. increase.
voice guidance of "External sound capture / ANC
TE-D01r
15 : 35
mode" will be played during the operation , but keep
ÿ Bluetooth
pressing it.
Press and hold the button on the L side for 1.5 seconds
Bluetooth
True Wireless Earphone
Disconnect
Press and hold for 3 seconds
Other devices
User Manual
External sound mode / External sound mode OFF
AVIOT TE-D01r Connected i
If you want to use the earphones on only one side
By turning off the power on one side of the earphone, you can use it with one ear alone.
Try again from ÿ of "Pairing" with another connected device.
ANC mode ON / OFF
* When using the external sound mode on one side, it can be used only on
Manual: v0.0
When changing from the earphone body
the L side. * ANC mode cannot be used on only one side.
With the earphone body turned on, press and hold the earphone on the R side until the
About product
Pairing / reset
(ANC mode indicates active noise canceling mode.) Press and hold
the button on the R side for 1.5 seconds + release your finger while
sound effect is heard.
the voice guidance is sounding to switch ANC mode ON / OFF.
ANC mode ÿ sound effect
Perform pairing. (At the time of initial setting) For
Body
details on pairing, please refer to the video from the QR code on the right.
Press and hold for 4.5 seconds
Press and hold the button on the R side for 1.5 seconds
ANC microphone
LED lamp
( 1 ) Turn on the Bluetooth of the
Touch sensor
ANC mode ÿ ANC mode OFF
15ÿ35
ÿÿÿBluetooth
connected device.
* Press and hold after the voice guidance of "ANC mode". * Release
your finger immediately after the sound effect. Try again from ÿ of
Call microphone
Bluetooth
Voice assistant ON / OFF
"Pairing" with another connected device.
Earpiece
You can activate the voice assistant on your smartphone by pressing and holding the button on the
Charging case
When changing from the charger
ÿ Turn on the power of the earphone
L side for 3 seconds. * During the operation, the voice guidance of "External sound mode" will be
Either the left or right LED flashes
orange and white (body color)
Turn it on.
played, but keep pressing it.
Place the earphones in the charging case,
Battery
make sure the orange LED is lit, and then
indicator
Press and hold the button on the L side for 3 seconds
press the physical button on the back of the
Physical button
case twice.
USB terminal outlet
External sound mode ÿ Sound effect
* It may not work depending on the connected model.
Press twice
ÿ Connect to the connected device.
accessories
List of operation methods
Step1.
Earpiece
Battery indicator
15 : 35
ÿ Bluetooth
Dedicated pouch
S / M / L 1 pair for each size
Bluetooth
* M size is attached to earphones
USER
MANUAL
Earpiece (shallow type)
1 USB Type C
cable
S / M / L 1 pair for each size
Product warranty registration card
By tapping the touch sensor, you can perform
various operations while wearing it.
* Pairing is possible even when the earphone body
Other devices
important
is in the orange LED lighting state (charged state).
Preseed Japan Corporation
i
When the LED blinks at high speed, it shifts
to pairing mode.
AVIOT TE-D01r
select
User Manual Product
Warranty Registration Card
Try again from ÿ of "Pairing" with another connected device.
Step2.
15 : 35
ÿ Bluetooth
Bluetooth pairing request
Power ON/OFF
(1) Delete the Bluetooth setting of the
Other devices
Cancel pairing
When switching with
select
AVIOT TE-D01r
connected device.
* Push notifications may not be displayed.
1 tap
R
1 tap
charging case blinks at two places at high speed,
stop
1 tap
ÿ
Song feed
ÿ Bluetooth
Power OFF ÿ LED orange
Song back
Press and hold for 10 seconds
Bluetooth
Step3.
15 : 35
Other devices
ÿ Bluetooth
Connected
1 tap
and the LED of the earphone lights up in white for 1 second.
15 : 35
sure the orange LED is lit before closing the case when storing it in the charging.
press and hold the physical button on the back for
reproduction
Power ON ÿ LED white (body color)
AVIOT TE-D01r Connected i
orange
orange
white
for 1 second
-+
ÿ
Turn up the volume
3 taps
Turn down the volume
2 taps
2 taps
3 taps
ÿ
ÿ
Bluetooth
Received
1 tap on incoming call
1 tap on incoming call
1 tap during a call
1 tap during a call
Other devices
AVIOT TE-D01r
* If 5 minutes have passed without being connected, the power will be turned off automatically.
L
( 2 ) Set both earphones in the charging case, and
10 seconds with the case open. The LED of the
the power ON / OFF charging case
Power ON / OFF can be switched by opening and closing the charging case. Make
Touch sensor operation
Correct reset method (when something goes wrong with the operation)
“AVIOT TE-D01r”
wants Bluetooth pairing.
Connected i
Connection completed
Disconnect
* When the reset is completed, the pairing mode is
automatically set.
End call
Machine Translated by Google
Deformation
or damage The accessory accessories such as this unit and earpieces may be
deformed or damaged in the worst case if they are left under force or weight for a long
time. Please be careful when storing. Also, since it uses precision electronic components,
do not subject it to strong impacts such as dropping or hitting it.
Precautions for use
How to read the LED
Correct mounting method
Earphone LED
ÿ
We cannot guarantee products other than those handled by
ÿ
us. We do not rent out replacement machines during the repair or replacement
ÿ
period. In the unlikely event that it is determined that it is not covered by the warranty, we may charge a
ÿ
round-trip shipping fee. Since the earphone body is a set product on the left and right, we do not replace it
on only one side. If production is complete, it may not be possible to replace it in the same color.
Power ON
Lit
White
Power OFF
Places to avoid
Moisture, dust, and high temperatures are great enemies for precision electrical
equipment such as this unit. Do not place it in a place with high humidity, dust, oily
smoke, steam, direct sunlight, or in a car where the temperature rises.
Lit
orange
ÿ
ÿÿÿ
Disclaimer
The warranty does not cover any malfunction or trouble of this product due to misuse by the customer. The
same applies to cases of failure or trouble caused by a disaster such as lightning or fire, for example, if the
letter on the phone
White
1 second
Pairing mode
White for 1 second...
White orange white orange
orange
charging
After wearing it, adjust it so that it is in a comfortable position before using it.
The
waterproof earphone body is waterproof, but if you touch it with wet hands or leave it
in the pocket of clothes wet with sweat or rain, the charging terminal will deteriorate or
in the worst case. It may be short-circuited. Use the product as dry as possible, such as
by wiping it off with a soft, dry cloth to remove moisture and dirt containing moisture.
The charging case is not waterproof.
How to select and attach earpieces
Product Specifications
2 times off
One side blinks alternately
product breaks down due to an impact or drop that occurs during transportation after purchasing this product.
We do not guarantee the connection and operation with all Bluetooth® devices and apps . We are not
responsible for any malfunction or trouble of other equipment used, or loss or damage of data caused by using
this product. In addition, we are not responsible for any damages caused by malfunctions / troubles of personal
computers, OSs, other software, compatible devices, etc., and data corruption / loss. Please note that. This
warranty is valid only in Japan.
Lit
For your safety
Off
Fully charged
By fitting the earpiece, you can enjoy better sound quality, so please give it a try.
Product model number
* Depending on the connected device, it may not be possible to display.
* When the earphones are fully charged, charging will end automatically.
By turning over the silicon earpiece, the shaft is stable and can be replaced
* The white LED lighting may look like the body color.
smoothly.
driver
TE-D01r
Warning
items (If you do not observe these displayed items, you may cause serious personal injury such as
!
death or serious injury due to fire or electric shock.) This unit and its accessories may be swallowed .
ÿ10mm dynamic driver
•
Please keep it out of reach. Also, be careful about the storage location so that pets do not touch or swallow
it. Drivers who drive safely in accordance with the Road Traffic Act are obliged to comply with the Road
High-sensitivity MEMS microphone x 6 (3 on each side)
Traffic Act. Never use it when driving a car, motorcycle, ship, bicycle, etc. Never disassemble it as it may
Microphone
IPX4
•
cause a malfunction or electric shock. When this unit is installed, it becomes difficult to hear external
Waterproof Level
equivalent Earphone One ear 50mAh / Case
•
•
surrounding area due to explosion, battery leakage, or overheating.
sounds such as warning sounds. Do not use in dangerous places if you cannot hear the surrounding
Charge
Charge the charging case
Battery Capacity
400mAh Up to 4.5 hours
Talk Time Play Time
Maximum 8.5 hours *
When using ANC mode and external sound capture mode, the
USB terminal outlet
USBÿAÿ ÿ
Precautions
(If you do not follow these indications, you may be injured or damage the surrounding household
!
Earphone body charging time
USBÿCÿ
•
playback time will be shortened by about 20 to 30%.
(Not included)
( accessories )
sound. Be sure to use the included USB cable when charging. A fire or injury may cause damage to the
5V AC adapter
* Due to the overvoltage protection function, charging may not be possible if the voltage is higher or lower than
the specified voltage.
About 1.5 hours
Maximum
DC5V/400mA
input Charging
USB Type C
port compatible codec
•
use will be a burden on your ears. Please take off your earphones about once an hour and be sure to take
a break. If you feel that this product does not suit your skin due to allergies, discontinue use as soon as
possible and consult a doctor or the store where you purchased the product. • If the skin is left in contact
AAC,SBC
•
Bluetooth® is a wireless technology that uses the 2.4 GHz band. Precautions
Corresponding profile
A2DP,HFP,HSP,AVRCP
Bluetooth version
5.2
goods.) If you listen at a loud volume for a long time, it may adversely affect your hearing. I have. To
protect your ears, be careful not to turn up the volume too much. Also, regardless of the volume, long-term
with the energized product for a long time, it may cause low-temperature burns. The static electricity that
accumulates on the human body due to rubbing of clothing may cause tingling and pain in the ears.
regarding radio wave interference
The battery indicator flashes while charging.
Bluetooth multi-pairing 8 devices
•
Bluetooth® is a standard for short-range communication, and if there is no obstruction, it can communicate
LED
Battery level
1ÿ25ÿ
Japanese voice guidance
up to about 10 m in a straight line. Due to the high frequency, the effective communication range varies
greatly depending on the shield (human body, metal, wall, etc.) and the surrounding radio wave conditions.
25ÿ50ÿ
Bluetooth® communication may cause noise or interruptions in usage, and in the worst
50ÿ75ÿ
75ÿ100ÿ
Warranty provisions
case, it may not be possible to connect.
a.
This product will be repaired or replaced free of charge for natural failures caused by normal handling.
Locations where the same 2.4GHz band wireless LAN is installed, around microwave ovens in use,
When making inquiries to us, please have the documents or electronic data certifying the purchase and its
near transformers, etc., where electromagnetic waves are generated. b. When the human body
* When the battery capacity of the charging case runs out when charging the main
intervenes
the straight
this
unitradio
and the
Bluetooth®
device. When
there
an Bluetooth®
obstruction
such ason
a metal
or wallline
thatbetween
does not
allow
waves
to pass between
the unit
andisthe
unit, the main unit may be automatically connected to the device, but this is not a
c.
Check the battery level of the main unit
You can check the battery level on the screen of your device such as a smartphone.
registered your product using our dedicated registration form. If you do not have the documents or electronic
Product
TE-D01r
data that prove your purchase, such as the receipt or delivery note of an authorized retailer. Repaired or
warranty registration page
product page
charging
replacement.
cases. We
* The
cannot
warranty
guarantee
period
that
is the
12 months
accessories
from or
theouter
date box
of purchase,
will be damaged
even forduring
products
verification
that have
or
Conversely, radio waves generated by Bluetooth® devices can affect the operation of
been replaced free of charge or for a fee within the warranty period. It will not be extended after replacement
other electronic devices. In the worst case, it may cause an accident. In the following
regardless of whether it is free or paid. This product is subject to change without notice due to improvements.
places, turn off or turn off the settings of this unit and other Bluetooth® devices. Inside
(2) Please note that the warranty does not apply in principle in the following cases. ÿ If you have not
an airplane (use may be permitted during stable flight. Please contact the airline for
a.
details.) Inside the hospital / near priority seats in the train / places where flammable
equipment that operates with sensors, such as fire alarms, are installed
modified
by someone
other
our customer
When
the product
deteriorated
or damaged
to misuse
(including
damage
duethan
to excessive
input,support.
burning),
dropping,
impact,isaccident
caused
by the due
customer's
carelessness,
improper
storage.
if there
is a possibility
of scratches
or misuse
the
defective
earphone
regardless or
of the
time when
the Also,
symptom
occurred.
When used
with a power
supplyofand
a.
b.
Effective, battery 97%
Inquiry mail
form
12 months from the date of purchase. Applies only in Japan. (This warranty is valid only in japan.) In
addition, it will be extended for 3 months by user registration. The warranty covers only earphones and
15ÿ35
AVIOT TE-D01r
FAQ
using this product, be sure to read the instruction manual and our video to use it correctly. ÿ The period is
device.
gas is generated such as gas stations b. Other places, etc. Locations where
ÿ Connected terminal
inquiry
date, such as the receipt and delivery note of the store where you purchased the product, ready. Before
malfunction. Please charge the charging case diligently. * If the battery is not charged
for a long period of time, the performance of the battery will deteriorate, so charge it
regularly. (Recommended: at least once a month)
Disposal of rechargeable
batteries The rechargeable batteries built into the equipment can be recycled. Please
do not remove this rechargeable battery by yourself and consult customer support.
(Customer support contact information can be found on the product warranty card.)
c.
voltage other than the standard. Thing about consumables. When the cause of the failure is in a device
other than this product, such as a mobile terminal. Damage to the exterior such as scratches and dirt on the
c.
exterior of the main unit and plug. (What occurred after purchase) Even if the date of failure or malfunction
d.
is within the warranty period, the date and time when you contact us has passed the warranty period.
Things to avoid for long-term use
AVIOT
ONLINE
MALL
ef
Overdischarge Built-in battery may deteriorate due to overdischarge if left uncharged
* For iPhone, you can check by adding to the widget. * When the battery is less than
10%, a sound effect will sound.
for a long period of time. For long-term storage, charge the battery about once a month
g.
h.
* Brand names and product names described in packages and instruction manuals are generally trademarks (registered
i.
to prevent over-discharge.
trademarks) of companies or individuals.
Download