SEMI-DATAILED LESSON PLAN
Subject: EIM
I.
Objectives
At the end of the lesson, the learners are expected to:
1. Differentiate the two systems of measurements.
2. Convert the given unit of measurement into another unit of measurement
3. Appreciate the importance of converting unit of measurement.
Subject Matter
Concept
: SELECT ELECTRICAL MEASURING TOOLS AND INSTRUMENTS
Sub-Concept :Perform Mensuration and Calculation
Materials
: Power point presentation
Reference
: Module, Lesson 2 , Quarter 4 Week 3
Method
: Discussion and Demonstration
PROCEDURE:
A. Preparation
1. Daily routine, prayer
2. Checking of attendance
a. Reminder to accomplish the weekly tasks
b. Review the past lesson
c. Motivation
B. Review the Past Lesson
a. What are the last lesson that been tackled last week?
b. What are the different types of receipt forms
C. Presentation
1. Motivation
 Showing the different tools using for measuring and calculation and identify
by its uses
2.
Unlocking Difficulties
▪
Pull-push Rule - is a measuring tool used to measure the length of an object
in centimeters and inches.
▪
Ammeter - is an instrument used to measure the amount of electrical
current intensity in a circuit. The unit of measure is ampere (A). It is
connected along or series to the circuit.
▪
Voltmeter - is an instrument used to measure electrical pressure or voltage
of a circuit. The unit of measurement is volt (V). This is connected across or
parallel to the circuit.
▪
Volt-Ohmmeter (VOM) - otherwise called as multi tester; is used to measure
the voltage, resistance, and current of a circuit. It is connected in parallel or
series with the circuit depending on what to measure.
D. Lesson Proper
a. 1. Introduction
1.1. Discuss what is SELECT ELECTRICAL MEASURING TOOLS AND
INSTRUMENTS
1.2. Discuss the Value of Measuring Tools and Instruments used in
Electricity.
Reference: Module
A. Generalization
(Summarization of the Topic)
-
Electrical measuring tools and instruments are sensitive and delicate so
extra care is necessary in handling them. These are used to measure
currents, voltages,resistances, wattage's and other important elements
in electrical works. This topic, will tackle the function/use of each
measuring tool and instrument used in doing an electrical task.
B. Application
Provided with materials, let the students perform the SELECT ELECTRICAL MEASURING
TOOLS AND INSTRUMENTS on their respective group.
The Performance will be judge using the following Criteria.
Performance Rubrics:
CRITERIA
4
3
2
1
Participation
All members
actively
participating.
More than half of the
members participate.
At least half of the
members participate.
One or two
members actively
participate
Explanation
Excellent
explanation
Good explanation
Fair explanation
Poor explanation
Teamwork
Group members
work together;
roles clearly
defined
Group members mostly
work together; roles
clearly defined and
follow for the most part
Group members work
as a team somewhat;
roles not clearly
defined
Group members
works
individually; not
as a team
Legend:
1 – Poor (78 – below)
3 – Good (86 – 92)
2 – Fair (79 – 85)
4 – Excellent (93 – 100)
C. Values Integration
- Students will appreciate of how use the measuring tools in how to
calculation in electricity
A. Evaluation
WRITTEN TASK 1 WEEK 3 QUARTER 4
Directions: Write True if the statement is correct and False if not. Write your answer on a separate sheet
of paper.
1. Test light is a pocket -sized tool used to test the line wire or circuit if there is current in it.
2. Volt-Ohmmeter is also called multi-tester.
3. Ammeter is an instrument used to measure the amount of electrical current intensity in a
circuit.
4. Voltmeter is a measuring tool used to measure the length of an object.
5. Pull-push rule is connected in parallel or series with the circuit depending on what to
measure.
PERFORMANCE TASK OF WEEK 3 QUARTER 4
Directions: Identify the word/s being described by the following statements. Write the answer in your
notebook
1. It is a measuring tool used to measure the length of an object.
2. It is used in determining the size of wires/conductors.
3. It is an instrument used to measure the amount of electrical current intensity in a circuit.
4. It is an instrument used to measure current flowing in a conductor.
5. It is an instrument used to measure electrical pressure or voltage of a circuit.
Assignment
What I Know
Directions: Determine the correct unit abbreviation of the following. Write your
answer on a separate sheet of paper
1. Meter
4. Yard
2. Inch
5. Feet
3. Decameter
Prepared by:
FABROA, RYAN JAMES M.
WFT-4A