Sensor taps Automatic Sensor is easy to install and is simple to use as well. As you place your hand under the opening of the tap, the water will flow automatically and when we remove ur hand the water flow will stop. This happens due to inbuilt of sensors in the tap AUTOMATIC STAIRS Its starts running and stops automatically as it senses the presence or absence of the person. Infrared sensors THESE INFRARED SENSORS ARE USED IN SMART DEVICES... THESE INFRARED SENSORS ARE ALSO USED IN HOTELS... Photo electric sensor o These are used in street lights and automatic stairs. o The street lights automatically turns on and off as the Sunrisers and sunsets o This is implemented by using photo electric effect . o The street lights automatically turns on and off on the basis of darkness measured by a sensor TOUCH SENSOR Touch Sensor work similar to a switch. When they are subjected to touch,pressure or force they get activated and acts as a closed switch.. When the pressure or contact is removed they act as an open switch.. Advantages of sensors It avoids a lot of wiring It can accommodate new devices at any time It is flexible to go through physical partitions It can accessed through a centralized monitor Sensors such as PIR detectors are relatively cheap if using wired versions Presented by CH.HARI PRIYANKA Regd no:178H1A041