4/12/22, 12:25 AM
design and construction of digital clock - for B.Sc, HND, and OND project topics and material | www.hyclassproject.com
HyClassProject.com
HOME
ACCOUNT
ABOUT
+234 8146561114 or +2347015391124
CONTACT US
ORDER/BUY
FAQ
OUR CONSTRUCTION
BANK
PROJECT TOPICS
DESIGN AND CONSTRUCTION OF DIGITAL CLOCK
USER'S INSTRUCTIONS: The project work you are about to view is on "design and construction of
digital clock". Please, sit back and study the below research material carefully. This project topic "design and
construction of digital clock" have complete 5(five) Chapters. The complete Project Material/writeup include:
Abstract + Introduction + etc + Literature Review + methodology + etc + Conclusion + Recommendation +
References/Bibliography.Our aim of providing this "design and construction of digital clock" project research
material is to reduce the stress of moving from one school library to another all in the name of searching for
"design and construction of digital clockquot; &research materials. We are not encouraging any form of
plagiarism. This service is legal because, all institutions permit their students to read previous projects, books,
articles or papers while developing their own works.
TITLE PAGE
DESIGN AND CONSTRUCTION OF DIGITAL CLOCK
BY
--EE/H2013/01430
DEPARTMENT OF ---SCHOOL OF --INSTITUTE OF --DECEMBER,2018
APPROVAL PAGE
This is to certify that the research work, "design and construction of digital clock" by ---, Reg. No.
EE/H2007/01430 submitted in partial fulfillment of the requirement award of a Higher National Diploma on --has been approved.
By
--Supervisor
Signature……………….
. --Head of Department.
Signature……………….
……………………………….
--https://hyclassproject.com/design-and-construction-of-digital-clock11.html
1/11
4/12/22, 12:25 AM
design and construction of digital clock - for B.Sc, HND, and OND project topics and material | www.hyclassproject.com
External Invigilator
DEDICATION
This project is dedicated to Almighty God for his protection, kindness, strength over my life throughout the
period and also to my --- for his financial support and moral care towards me.Also to my mentor --- for her
academic advice she often gives to me. May Almighty God shield them from the peril of this world and bless
their entire endeavour Amen.
ACKNOWLEDGEMENT
The successful completion of this project work could not have been a reality without the encouragement of my
--- and other people. My immensely appreciation goes to my humble and able supervisor mr. --- for his
kindness in supervising this project.
My warmest gratitude goes to my parents for their moral, spiritual and financial support throughout my study
in this institution.
My appreciation goes to some of my lecturers among whom are Mr. ---, and Dr. ---. I also recognize the support
of some of the staff of --- among whom are: The General Manager, Deputy General manager, the internal
Auditor Mr. --- and the ---. Finally, my appreciation goes to my elder sister ---, my lovely friends mercy ---, ---,
--- and many others who were quite helpful.
PROJECT DESCRIPTION: This work "design and construction of digital clock" research material is a
complete and well researched project material strictly for academic purposes, which has been approved by
different Lecturers from different higher institutions. We made Preliminary pages, Abstract and
Chapter one of "design and construction of digital clock" visible for everyone, then the complete material
on "design and construction of digital clock" is to be ordered for. Happy viewing!!!
ABSTRACT
Digital clock project is developed for the users to use a digital clock. The main parts of this project are set
switch, microcontroller unit and LCD display.
This Project Digital clock using microcontroller is an advanced digital Clock, which displays the time using
LCD or seven segment display. This device display time in seconds, minutes and hours. The system has an
inverter which is used to power the system.
The user can set the time, date and day using the switch. When the user sets the timings, the settings will be
displayed in the LCD display. When the function key is turned on, the controller sends pulse to the LCD
display to display the current time.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE PROJECT
https://hyclassproject.com/design-and-construction-of-digital-clock11.html
2/11
4/12/22, 12:25 AM
design and construction of digital clock - for B.Sc, HND, and OND project topics and material | www.hyclassproject.com
PROBLEM STATEMENT
PURPOSE OF THE PROJECT
AIM/OBJECTIVE OF THE PROJECT
SIGNIFICANCE OF THE PROJECT
APPLICATION OF THE PROJECT
SCOPE OF THE PROJECT
METHODOLOGY
PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
HISTORY OF DIGITAL CLOCK
REVIEW OF EXISTING TECHNOLOGY
THE HISTORITICAL BACKGROUND OF THE DIGITAL CLOCK
CHAPTER THREE
METHODOLOGY
INTRODUCTION
SYSTEM BLOCK DIAGRAM
SYSTEM CIRCUIT DIAGRAM
CIRCUIT DESCRIPTION
PROGRAM DESCRIPTION
CHAPTER FOUR
.0
CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
CASING AND PACKAGING
ASSEMBLING OF SECTIONS
TESTING OF SYSTEM OPERATION
INSTALLATION OF THE COMPLETED DESIGN
COST ANALYSIS
DESCRIPTION OF SOME MAJOR COMPONENTS USED
CHAPTER FIVE
CONCLUSION
RECOMMENDATION
REFERENCES
CHAPTER THREE
METHODOLOGY
INTRODUCTION
SYSTEM BLOCK DIAGRAM
SYSTEM CIRCUIT DIAGRAM
CIRCUIT DESCRIPTION
PROGRAM DESCRIPTION
CHAPTER FOUR
.0
CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
CASING AND PACKAGING
https://hyclassproject.com/design-and-construction-of-digital-clock11.html
3/11
4/12/22, 12:25 AM
design and construction of digital clock - for B.Sc, HND, and OND project topics and material | www.hyclassproject.com
ASSEMBLING OF SECTIONS
TESTING OF SYSTEM OPERATION
INSTALLATION OF THE COMPLETED DESIGN
COST ANALYSIS
DESCRIPTION OF SOME MAJOR COMPONENTS USED
CHAPTER FIVE
CONCLUSION
RECOMMENDATION
REFERENCES
CHAPTER ONE
INTRODUCTION
1.1
BACKGROUND OF THE PROJECT
Digital clock is very useful projects for final year students.. It has an Inbuilt Real Time Clock which tracks over
the Real Time. It displays the time in hh:mms format. The time and date can be changed at any Time using the
swtich. The Real Time Clock is displayed on LCD display.
A digital timing circuit (digital clock) is something we use and depend on every day. The timing circuit used in
this project will be entirely hardware based. It will consist of two timing signals, a 60Hz clock pulse used as the
main timing signal (multiples of 60s) and a 1kHz clock pulse used for multiplexing a 7-segment display for the
clock. The 60Hz clock pulse will be divided by sixty multiple times in order to provide a pulse for seconds,
minutes and hours. These pulses will be counted, stored in memory registers and then displayed to show the
current time.
1.2
PROBLEM STATEMENT
The first clock that was invented was analogue clock which has no other features apart from time and it also
consumes higher power and stops working as soon as the power battery is removed. These disadvantages also
happen in our digital clocks – their time is reset or stopped as soon as the system power battery or source is
removed. However, digital real time clock came to overcome these problems. Digital time clock counts hours,
minutes, seconds, months, days and even years digitally.
1.3
OBJECTIVE OF THE PROJECT
The objective of this project is construct a device that will display the time in seconds, minutes and hours. In
addition to this, it will also display time. We can also set the time using the switch.
1.4
SIGNIFICANCE OF THE PROJECT
You truly cannot be an organized human being unless you use a good timing system! And if you’re still
someone who likes to keep all of their appointments, activities - I highly encourage you to consider tossing out
the paper and find an electronic clock system that works for you.
One of the most beautiful things about digital clock is that they can be synced, so you can have your clock on
your smart phone, your tablet, your laptop, as well as it can sync to your husband’s electronic clock and your
kids’ clock. So no matter where you are- you can easily look up and see what your current appointments are for
any given day. And the important people in your life can know the latest schedule and commitments toowithout coming home and consulting the kitchen wall.
1.5
ADVANTAGES OF DIGITAL CLOCK
Even if there is power failure, this clock displays the right time using an inverter.
Simplicity of the system.
Accuracy of the system.
https://hyclassproject.com/design-and-construction-of-digital-clock11.html
4/11
4/12/22, 12:25 AM
design and construction of digital clock - for B.Sc, HND, and OND project topics and material | www.hyclassproject.com
Digital clock project is developed for the users to use a digital clock. The main parts of this project are
set switch, microcontroller unit and LCD display.
This Project Digital clock using microcontroller is an advanced digital Clock, which displays the time
using LCD or seven segment display. This device display time in seconds, minutes and hours. The
system has an inverter which is used to power the system.
The user can set the time, date and day using the switch. When the user sets the timings, the settings will
be displayed in the LCD display. When the function key is turned on, the controller sends pulse to the
LCD display to display the current time.
TABLE OF CONTENTS
COVER PAGE
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWELDGEMENT
ABSTRACT
CHAPTER ONE
INTRODUCTION
1.1
BACKGROUND OF THE PROJECT
PROBLEM STATEMENT
PURPOSE OF THE PROJECT
AIM/OBJECTIVE OF THE PROJECT
SIGNIFICANCE OF THE PROJECT
APPLICATION OF THE PROJECT
SCOPE OF THE PROJECT
METHODOLOGY
PROJECT ORGANISATION
CHAPTER TWO
LITERATURE REVIEW
HISTORY OF DIGITAL CLOCK
REVIEW OF EXISTING TECHNOLOGY
THE HISTORITICAL BACKGROUND OF THE DIGITAL CLOCK
CHAPTER THREE
METHODOLOGY
INTRODUCTION
SYSTEM BLOCK DIAGRAM
SYSTEM CIRCUIT DIAGRAM
CIRCUIT DESCRIPTION
PROGRAM DESCRIPTION
CHAPTER FOUR
.0
CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
CASING AND PACKAGING
ASSEMBLING OF SECTIONS
TESTING OF SYSTEM OPERATION
INSTALLATION OF THE COMPLETED DESIGN
COST ANALYSIS
DESCRIPTION OF SOME MAJOR COMPONENTS USED
https://hyclassproject.com/design-and-construction-of-digital-clock11.html
5/11
4/12/22, 12:25 AM
design and construction of digital clock - for B.Sc, HND, and OND project topics and material | www.hyclassproject.com
CHAPTER FIVE
CONCLUSION
RECOMMENDATION
REFERENCES
CHAPTER THREE
METHODOLOGY
INTRODUCTION
SYSTEM BLOCK DIAGRAM
SYSTEM CIRCUIT DIAGRAM
CIRCUIT DESCRIPTION
PROGRAM DESCRIPTION
CHAPTER FOUR
.0
CONSTRUCTION PROCEDURE AND TESTING ANALYSIS
CASING AND PACKAGING
ASSEMBLING OF SECTIONS
TESTING OF SYSTEM OPERATION
INSTALLATION OF THE COMPLETED DESIGN
COST ANALYSIS
DESCRIPTION OF SOME MAJOR COMPONENTS USED
CHAPTER FIVE
CONCLUSION
RECOMMENDATION
REFERENCES
CHAPTER ONE
INTRODUCTION
1.1
BACKGROUND OF THE PROJECT
Digital clock is very useful projects for final year students.. It has an Inbuilt Real Time Clock which
tracks over the Real Time. It displays the time in hh:mms format. The time and date can be changed at
any Time using the swtich. The Real Time Clock is displayed on LCD display.
A digital timing circuit (digital clock) is something we use and depend on every day. The timing circuit
used in this project will be entirely hardware based. It will consist of two timing signals, a 60Hz clock
pulse used as the main timing signal (multiples of 60s) and a 1kHz clock pulse used for multiplexing a 7segment display for the clock. The 60Hz clock pulse will be divided by sixty multiple times in order to
provide a pulse for seconds, minutes and hours. These pulses will be counted, stored in memory registers
and then displayed to show the current time.
1.2
PROBLEM STATEMENT
The first clock that was invented was analogue clock which has no other features apart from time and it
also consumes higher power and stops working as soon as the power battery is removed. These
disadvantages also happen in our digital clocks – their time is reset or stopped as soon as the system
power battery or source is removed. However, digital real time clock came to overcome these problems.
Digital time clock counts hours, minutes, seconds, months, days and even years digitally.
1.3
OBJECTIVE OF THE PROJECT
https://hyclassproject.com/design-and-construction-of-digital-clock11.html
6/11
4/12/22, 12:25 AM
design and construction of digital clock - for B.Sc, HND, and OND project topics and material | www.hyclassproject.com
The objective of this project is construct a device that will display the time in seconds, minutes and
hours. In addition to this, it will also display time. We can also set the time using the switch.
1.4
SIGNIFICANCE OF THE PROJECT
You truly cannot be an organized human being unless you use a good timing system! And if you’re still
someone who likes to keep all of their appointments, activities - I highly encourage you to consider
tossing out the paper and find an electronic clock system that works for you.
One of the most beautiful things about digital clock is that they can be synced, so you can have your
clock on your smart phone, your tablet, your laptop, as well as it can sync to your husband’s electronic
clock and your kids’ clock. So no matter where you are- you can easily look up and see what your
current appointments are for any given day. And the important people in your life can know the latest
schedule and commitments too- without coming home and consulting the kitchen wall.
1.5
ADVANTAGES OF DIGITAL CLOCK
Even if there is power failure, this clock displays the right time using an inverter.
Simplicity of the system.
Accuracy of the system.
1.6
APPLICATIONS
Because digital clock is very small and inexpensive devices that enhance the popularity of product
designs, they are often incorporated into all kinds of devices such as
• Cars
• Radios
• Televisions
1.7
METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:
Study of the previous work on the project so as to improve it efficiency.
Draw a block diagram.
Test for continuity of components and devices,
Design and calculation for the device was carried out.
Studying of various component used in circuit.
Construction of the circuit was carried out.
Finally, the whole device was cased and final test was carried out.
1.8
PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters
to enhance comprehensive and concise reading. In this project thesis, the project is organized
sequentially as follows:
Chapter one of this work is on the introduction to a digital clock. In this chapter, the background,
significance, objective limitation and problem of a digital clock were discussed.
Chapter two is on literature review of a digital clock. In this chapter, all the literature pertaining to this
work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and
construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
1.6
APPLICATIONS
Because digital clock is very small and inexpensive devices that enhance the popularity of product designs,
they are often incorporated into all kinds of devices such as
• Cars
• Radios
https://hyclassproject.com/design-and-construction-of-digital-clock11.html
7/11
4/12/22, 12:25 AM
design and construction of digital clock - for B.Sc, HND, and OND project topics and material | www.hyclassproject.com
• Televisions
1.7
METHODOLOGY
To achieve the aim and objectives of this work, the following are the steps involved:
Study of the previous work on the project so as to improve it efficiency.
Draw a block diagram.
Test for continuity of components and devices,
Design and calculation for the device was carried out.
Studying of various component used in circuit.
Construction of the circuit was carried out.
Finally, the whole device was cased and final test was carried out.
1.8
PROJECT WORK ORGANISATION
The various stages involved in the development of this project have been properly put into five chapters to
enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as
follows:
Chapter one of this work is on the introduction to a digital clock. In this chapter, the background, significance,
objective limitation and problem of a digital clock were discussed.
Chapter two is on literature review of a digital clock. In this chapter, all the literature pertaining to this work
was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and
construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
CHAPTER TWO: The chapter one of this work has been displayed above. The complete chapter two of
"design and construction of digital clock" is also available. Order full work to download. Chapter two of
"design and construction of digital clock" consists of the literature review. In this chapter all the related work
on "design and construction of digital clock" was reviewed.
CHAPTER THREE: The complete chapter three of "design and construction of digital clock" is
available. Order full work to download. Chapter three of "design and construction of digital clock" consists of
the methodology. In this chapter all the method used in carrying out this work was discussed.
CHAPTER FOUR: The complete chapter four of "design and construction of digital clock" is available.
Order full work to download. Chapter four of "design and construction of digital clock" consists of all the test
conducted during the work and the result gotten after the whole work
CHAPTER FIVE: The complete chapter five of design and construction of a "design and construction of
digital clock" is available. Order full work to download. Chapter five of "design and construction of digital
clock" consist of conclusion, recommendation and references.
CLICK HERE FOR MORE RELATED TOPICS/MATERIAL
To "DOWNLOAD" the complete material on this particular topic above click "HERE"
Do you want our Bank Accounts? please click HERE
To view other related topics click HERE
https://hyclassproject.com/design-and-construction-of-digital-clock11.html
8/11
4/12/22, 12:25 AM
design and construction of digital clock - for B.Sc, HND, and OND project topics and material | www.hyclassproject.com
To "SUMMIT" new topic(s), develop a new topic OR you did not see your topic on our site but want to
confirm the availiability of your topic click HERE
Do you want us to research your new topic? if yes, click "HERE"
Do you have any question concerning our post/services? click HERE for answers to your questions
For more information contact us through any of the following means:
Mobile No
:+2348146561114 or +2347015391124 [Mr. Innocent]
Email address
:engr4project@gmail.com
Watsapp No
:+2348146561114
COUNTRIES THAT FOUND OUR SERVICES USEFUL
Australia, Botswana, Canada, Europe, Ghana, Ireland, India, Kenya, Liberia, Malaysia, Namibia, New Zealand,
Nigeria, Pakistan, Philippines, Singapore, Sierra Leone, South Africa, Uganda, United States, United Kindom,
Zambia, Zimbabwe, etc
Support: +234 8146561114 or +2347015391124
Watsapp No
:+2348146561114
Email Address
:engr4project@gmail.com
FOLLOW / VISIT US VIA:
USEFUL LINKS
Order Full Material(s)
Download Full Material(s)
Bank Accounts
Contact us
Hire a writer
Order/learn construction
https://hyclassproject.com/design-and-construction-of-digital-clock11.html
9/11
4/12/22, 12:25 AM
design and construction of digital clock - for B.Sc, HND, and OND project topics and material | www.hyclassproject.com
View other related topics
Vrequently asked questions(FAQ)
View more related topics and download more material
PROJECT DESCRIPTION
Format = microsoft word
Chapters = 1-5 chapters
Price: N3,000.
PROJECT CATEGORIES
» Accountancy (AC) project
» Agric engineering project topics
» Business admin and management project
» Banking and finance project
» Civil engineering project
» Co-operative economics and management project
» Computer science project
» Community Health Project
» Electrical/electronic/telecom/ power project
» Estate management project
» Education
» Human Kinetics & Health Education Project
» Industrial safety and environmental (ISET) project
» Mass communication project
» Mechanical engineering (ME) project
» Medical And Health Science Project
» Office technology and management (O.T.M) project
» Public administration (PA) project
https://hyclassproject.com/design-and-construction-of-digital-clock11.html
10/11
4/12/22, 12:25 AM
design and construction of digital clock - for B.Sc, HND, and OND project topics and material | www.hyclassproject.com
» Public Health Education Project Topics
» Paramedic Project Topics
» Industrial Physics/Physics Electronics Project
» Science laboratory technology (microbiology option) project
SEMINAR CATEGORIES
» Agricultural science and engineering seminar
» Building engineering seminar topics/materials
» Civil engineering seminar topics
» Computer science seminar topics
» Environmental seminar topics
» Electrical/electronic/telecom/ power seminar
» Mechanical engineering seminar
» Physics / industrial physics/physics electronics seminar topics/materials
HOME
ORDER/BUY
BANK ACCOUNT
FAQ
TERMS OF USE
DISCLAIMER
COPY RIGHT ISSUES
OUR CONSTRUCTION
https://hyclassproject.com/design-and-construction-of-digital-clock11.html
11/11