CAMPUS® Datasheet
ULTEM™ Resin 9075 - PEI
SABIC
Product Texts
High flow Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.
Rheological properties
Melt volume-flow rate, MVR
Unit
cm³/10min
Test Standard
ISO 1133
340
°C
ISO 1133
5
kg
ISO 1133
Value
3200
Unit
MPa
Test Standard
ISO 527-1/-2
Stress at break
75
MPa
ISO 527-1/-2
Strain at break
25
%
ISO 527-1/-2
Charpy notched impact strength, +23°C
7
kJ/m²
ISO 179/1eA
Charpy notched impact strength, -30°C
6
kJ/m²
ISO 179/1eA
Thermal properties
Vicat softening temperature, 50°C/h 50N
Value
200
Unit
°C
Test Standard
ISO 306
Other properties
Water absorption
Value
1.25
Unit
%
Test Standard
Sim. to ISO 62
Temperature
Load
Mechanical properties
Tensile modulus
Value
15
Humidity absorption
0.7
%
Sim. to ISO 62
Density
1.32
kg/m³
ISO 1183
Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available
upon request) unless agreed otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good
faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL
PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR
INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller materials
for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product,
service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.
© 2021
Last update: 2021-10-28 Source: https://www.campusplastics.com
Page: 1/1